{
"NDC": [
{
"NDCCode": "71288-025-75",
"PackageDescription": "1 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (71288-025-75) / 100 mL in 1 VIAL, PHARMACY BULK PACKAGE",
"NDC11Code": "71288-0025-75",
"ProductNDC": "71288-025",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220727",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215196",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2023-10-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220727",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin hydrochloride-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), Vancomycin Hydrochloride for Injection has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin hydrochloride. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection and other antibacterial drugs, Vancomycin Hydrochloride for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin hydrochloride is not effective by the oral route for other types of infections.",
"Description": "Vancomycin Hydrochloride for Injection, USP, is a white or off-white to light tan-colored lyophilized powder or cake, for preparing intravenous (IV) infusions, in Pharmacy Bulk Package bottles containing the equivalent of 5 grams or 10 grams vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg per mL for the 5 gram Pharmacy Bulk Package bottle and 100 mg per mL for the 10 gram Pharmacy Bulk Package bottle, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is [3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (see DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package). FURTHER DILUTION IS REQUIRED. NOT FOR DIRECT INFUSION."
},
{
"NDCCode": "71288-007-75",
"PackageDescription": "1 BOTTLE in 1 CARTON (71288-007-75) / 1 INJECTION, POWDER, FOR SOLUTION in 1 BOTTLE",
"NDC11Code": "71288-0007-75",
"ProductNDC": "71288-007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin And Sulbactam",
"NonProprietaryName": "Ampicillin Sodium And Sulbactam Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20181217",
"EndMarketingDate": "20240731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090578",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "AMPICILLIN SODIUM; SULBACTAM SODIUM",
"StrengthNumber": "10; 5",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20181217",
"EndMarketingDatePackage": "20240731",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin and sulbactam for injection is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below.",
"Description": "Ampicillin and Sulbactam for Injection, USP is an injectable antibacterial combination consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S,5R,6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection, USP, ampicillin sodium/sulbactam sodium parenteral combination, is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8.0 and 10.0. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Ampicillin and Sulbactam for Injection, USP pharmacy bulk package is a vial containing a sterile preparation of ampicillin sodium and sulbactam sodium for parenteral use that contains many single doses. The Pharmacy Bulk Package is for use in a pharmacy admixture setting; it provides many single doses of Ampicillin and Sulbactam for Injection, USP for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (see DIRECTIONS FOR USE - Directions for Proper Use of Pharmacy Bulk Package)."
},
{
"NDCCode": "71288-026-75",
"PackageDescription": "1 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (71288-026-75) / 95 mL in 1 VIAL, PHARMACY BULK PACKAGE",
"NDC11Code": "71288-0026-75",
"ProductNDC": "71288-026",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220727",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215196",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "g/95mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2023-10-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220727",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin hydrochloride-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), Vancomycin Hydrochloride for Injection has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin hydrochloride. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection and other antibacterial drugs, Vancomycin Hydrochloride for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin hydrochloride is not effective by the oral route for other types of infections.",
"Description": "Vancomycin Hydrochloride for Injection, USP, is a white or off-white to light tan-colored lyophilized powder or cake, for preparing intravenous (IV) infusions, in Pharmacy Bulk Package bottles containing the equivalent of 5 grams or 10 grams vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg per mL for the 5 gram Pharmacy Bulk Package bottle and 100 mg per mL for the 10 gram Pharmacy Bulk Package bottle, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is [3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (see DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package). FURTHER DILUTION IS REQUIRED. NOT FOR DIRECT INFUSION."
},
{
"NDCCode": "71288-033-75",
"PackageDescription": "1 BOTTLE in 1 CARTON (71288-033-75) / 1 INJECTION, POWDER, FOR SOLUTION in 1 BOTTLE",
"NDC11Code": "71288-0033-75",
"ProductNDC": "71288-033",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin And Sulbactam",
"NonProprietaryName": "Ampicillin Sodium And Sulbactam Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20061127",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065403",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "AMPICILLIN SODIUM; SULBACTAM SODIUM",
"StrengthNumber": "10; 5",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-08-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20061127",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin and Sulbactam for Injection is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below.",
"Description": "Ampicillin and Sulbactam for Injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium issodium penicillinate sulfone; sodium (2S,5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection, USP is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions. The pH of the solutions is between 8 and 10. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 15 g sterile Pharmacy Bulk Package contains ampicillin 10 g and sulbactam 5 g (equivalent to 10.629 g ampicillin sodium and 5.470 g sulbactam sodium). Each sterile Pharmacy Bulk Package contains approximately 1150 mg of sodium. Ampicillin and Sulbactam for Injection, USP Pharmacy Bulk Package is a bottle containing a sterile preparation for parenteral use. The Pharmacy Bulk Package is for use in a pharmacy admixture setting; it provides many single doses of Ampicillin and Sulbactam for Injection, USP for additionto suitable parenteral fluids in the preparation of admixtures for intravenous infusion. (See DIRECTIONS FOR USE - Directions for Proper Use of Pharmacy Bulk Package section). FURTHER DILUTION IS REQUIRED BEFORE USE."
},
{
"NDCCode": "71288-170-75",
"PackageDescription": "1 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (71288-170-75) / 50 mL in 1 VIAL, PHARMACY BULK PACKAGE",
"NDC11Code": "71288-0170-75",
"ProductNDC": "71288-170",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluorouracil",
"NonProprietaryName": "Fluorouracil",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240924",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216494",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "FLUOROURACIL",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240924",
"SamplePackage": "N",
"IndicationAndUsage": "Fluorouracil Injection is indicated for the treatment of patients with:.",
"Description": "Fluorouracil Injection, USP, a nucleoside metabolic inhibitor, is a clear and colorless to faint yellow, aqueous, sterile, nonpyrogenic injectable solution available in 50 mL pharmacy bulk package, a sterile preparation that contains doses for multiple patients for intravenous administration. Each mL contains 50 mg fluorouracil, USP in water for injection, USP. The pH is adjusted to approximately 9.2 with sodium hydroxide, NF. Chemically, fluorouracil, a fluorinated pyrimidine, is 5-fluoro-2,4 (1H,3H)-pyrimidinedione. Its structural formula is."
},
{
"NDCCode": "71288-808-76",
"PackageDescription": "10 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (71288-808-76) > 5 mL in 1 VIAL, PHARMACY BULK PACKAGE (71288-808-75) ",
"NDC11Code": "71288-0808-76",
"ProductNDC": "71288-808",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenylephrine Hydrochloride",
"NonProprietaryName": "Phenylephrine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180427",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210333",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2020-12-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180427",
"SamplePackage": "N",
"IndicationAndUsage": "Phenylephrine Hydrochloride Injection is indicated for the treatment of clinically important hypotension resulting primarily from vasodilation in the setting of anesthesia.",
"Description": "Phenylephrine is an alpha-1 adrenergic receptor agonist. Phenylephrine Hydrochloride Injection, USP 10 mg per mL, is a sterile, nonpyrogenic solution for intravenous use. It must be diluted before administration as an intravenous bolus or continuous intravenous infusion. The chemical name of phenylephrine hydrochloride is (-)-m-hydroxy-α- [(methylamino)methyl]benzyl alcohol hydrochloride and is chemically designated as C9H14ClNO2 with a molecular weight of 203.66 g/mol. Its structural formula is depicted below:. Phenylephrine hydrochloride is soluble in water and ethanol, and insoluble in chloroform and ethyl ether. Phenylephrine Hydrochloride Injection, USP, 10 mg per mL, is a clear, colorless solution and is sensitive to light. Each mL contains: phenylephrine hydrochloride 10 mg, sodium chloride 3.5 mg, sodium citrate dihydrate 4 mg, citric acid monohydrate 1 mg, and sodium metabisulfite 2 mg in water for injection. The pH is adjusted with sodium hydroxide and/or hydrochloric acid if necessary. The pH range is 3.5-5.5."
},
{
"NDCCode": "10345-025-01",
"PackageDescription": "1 BOTTLE in 1 PACKAGE (10345-025-01) > 75 mL in 1 BOTTLE",
"NDC11Code": "10345-0025-01",
"ProductNDC": "10345-025",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Immortelle Brightening Hand Care Spf 15",
"NonProprietaryName": "Octinoxate, Octisalate, Avobenzone, Octocrylene",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20110913",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "LABORATOIRES M&L",
"SubstanceName": "OCTINOXATE; OCTISALATE; AVOBENZONE; OCTOCRYLENE",
"StrengthNumber": "75; 50; 30; 26",
"StrengthUnit": "mg/mL; mg/mL; mg/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "12022-025-00",
"PackageDescription": "75 mL in 1 BOTTLE (12022-025-00) ",
"NDC11Code": "12022-0025-00",
"ProductNDC": "12022-025",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sulfur 8 Loc Twist And Braid Scalp",
"NonProprietaryName": "Salicylic Acid",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20030519",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M032",
"LabelerName": "J. Strickland & Co.",
"SubstanceName": "SALICYLIC ACID",
"StrengthNumber": "30",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2023-10-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20030519",
"SamplePackage": "N",
"IndicationAndUsage": "relieves scalp itching, irritation, redness, scaling and flaking associated with dandruff."
},
{
"NDCCode": "52533-025-75",
"PackageDescription": "100 mL in 1 BAG (52533-025-75)",
"NDC11Code": "52533-0025-75",
"ProductNDC": "52533-025",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fentanyl Citrate",
"NonProprietaryName": "Fentanyl Citrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20130130",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Cantrell Drug Company",
"SubstanceName": "FENTANYL CITRATE",
"StrengthNumber": "20",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "59651-025-75",
"PackageDescription": "75 mL in 1 BOTTLE (59651-025-75) ",
"NDC11Code": "59651-0025-75",
"ProductNDC": "59651-025",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin And Clavulanate Potassium",
"NonProprietaryName": "Amoxicillin And Clavulanate Potassium",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20190419",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209371",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "AMOXICILLIN; CLAVULANATE POTASSIUM",
"StrengthNumber": "125; 31.25",
"StrengthUnit": "mg/5mL; mg/5mL",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-08-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190419",
"SamplePackage": "N",
"IndicationAndUsage": "Amoxicillin and clavulanate potassium for oral suspension is a combination of amoxicillin, a penicillin-class antibacterial and clavulanate potassium, a beta-lactamase inhibitor, indicated for the treatment of infections caused by designated susceptible (confirmed or suspected) beta-lactamase-producing microorganisms (1). Lower Respiratory Tract Infections (1.1): 1 Amoxicillin and Clavulanate Potassium for Oral Suspension: pediatric patients weighing less than 40 kg, and in adult and pediatric patients who cannot swallow tablets.",
"Description": "Amoxicillin and clavulanate potassium for oral suspension, USP is an oral antibacterial combination consisting of the semisynthetic antibacterial amoxicillin and the beta-lactamase inhibitor, clavulanate potassium (the potassium salt of clavulanic acid). : 1 In amoxicillin and clavulanate potassium for oral suspension, USP, amoxicillin is present as amoxicillin trihydrate."
},
{
"NDCCode": "67544-025-75",
"PackageDescription": "150 TABLET in 1 BOTTLE, PLASTIC (67544-025-75)",
"NDC11Code": "67544-0025-75",
"ProductNDC": "67544-025",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"NonProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100422",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040201",
"LabelerName": "Aphena Pharma Solutions - Tennessee, Inc.",
"SubstanceName": "HYDROCODONE BITARTRATE; ACETAMINOPHEN",
"StrengthNumber": "10; 500",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC],Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2018-12-28",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "82652-021-01",
"PackageDescription": "1 KIT in 1 CARTON (82652-021-01) * 1 TABLET, FILM COATED in 1 PACKET (82652-022-01) * 2 TABLET, FILM COATED in 1 PACKET (82652-025-01) * 2 TABLET in 1 PACKET (82652-030-01) * 2 TABLET in 1 PACKET * 1 TABLET, FILM COATED in 1 PACKET (82652-031-01) * 2 TABLET in 1 PACKET (82652-032-01) * 2 TABLET, CHEWABLE in 1 PACKET (82652-026-01) * 2 TABLET, FILM COATED in 1 PACKET (82652-024-01) * 2 TABLET, CHEWABLE in 1 PACKET (82652-023-01) * .5 g in 1 PACKET (82652-028-01) * .9 g in 1 PACKET (82652-027-01) * .9 g in 1 PACKET (82652-029-01) * .75 g in 1 PACKET (82652-033-01) ",
"NDC11Code": "82652-0021-01",
"ProductNDC": "82652-021",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Diphen",
"NonProprietaryName": "Benzocaine, Benzalkonium Chloride, Lidocaine Hydrochloride, Hydrocortisone, Bacitracin Zinc, Neomycin Sulfate, Polymyxin B Sulfate, Calcium Carbonate, Ibuprofen, Loratadine, Acetaminophen, Dextromethorphan Hydrobromide, Guaifenesin, Phenylephrine Hydrochloride, Diphenhydramine Hydrochloride, Potassium Chloride, Magnesium Oxide, Meclizine Hydrochloride, And Bismuth Subsalicylate",
"DosageFormName": "KIT",
"StartMarketingDate": "20220510",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076134",
"LabelerName": "Remedy Pack LLC",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20220510",
"SamplePackage": "N"
},
{
"NDCCode": "84753-025-01",
"PackageDescription": "75 g in 1 BOTTLE, PLASTIC (84753-025-01) ",
"NDC11Code": "84753-0025-01",
"ProductNDC": "84753-025",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Solid Deodorant Stick",
"NonProprietaryName": "Solid Deodorant Stick",
"DosageFormName": "EMULSION",
"RouteName": "CUTANEOUS",
"StartMarketingDate": "20241009",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "505G(a)(3)",
"LabelerName": "Guangdong Bisutang Biotechnology Co., Ltd.",
"SubstanceName": "ETHYLHEXYL PALMITATE",
"StrengthNumber": "29",
"StrengthUnit": "g/75g",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20241009",
"SamplePackage": "N",
"IndicationAndUsage": "Temporarily protects and helps relieve dry or cracked skin Beneficlal for face, hands, body, and legs."
},
{
"NDCCode": "71288-412-10",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (71288-412-10) / 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "71288-0412-10",
"ProductNDC": "71288-412",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eptifibatide",
"NonProprietaryName": "Eptifibatide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240509",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213599",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "EPTIFIBATIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Platelet Aggregation [PE], Platelet Aggregation Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2024-05-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240509",
"SamplePackage": "N",
"IndicationAndUsage": "Eptifibatide Injection is a platelet aggregation inhibitor indicated for: : 1 Treatment of acute coronary syndrome (ACS) managed medically or with percutaneous coronary intervention (PCI) (1.1) , 2 Treatment of patients undergoing PCI (including intracoronary stenting) (1.2) .",
"Description": "Eptifibatide is a cyclic heptapeptide containing 6 amino acids and 1 mercaptopropionyl (des-amino cysteinyl) residue. An interchain disulfide bridge is formed between the cysteine amide and the mercaptopropionyl moieties. Chemically it is N6-(aminoiminomethyl)-N2-(3-mercapto-1-oxopropyl)-L-lysylglycyl-L-α-aspartyl-L-tryptophyl-L-prolyl-L-cysteinamide, cyclic (1→6)-disulfide. Eptifibatide binds to the platelet receptor glycoprotein (GP) IIb/IIIa of human platelets and inhibits platelet aggregation. The eptifibatide peptide is produced by solid-phase peptide synthesis, and is purified by preparative reverse-phase liquid chromatography and lyophilized. The structural formula is. Eptifibatide Injection is a clear, colorless, sterile, nonpyrogenic solution for intravenous (IV) use with an empirical formula of C35H49N11O9S2 and a molecular weight of 831.96. Each 10 mL single-dose vial contains 2 mg per mL of Eptifibatide Injection and each 100 mL single-dose vial contains 0.75 mg per mL of Eptifibatide Injection. Each vial of either size also contains 5.25 mg per mL citric acid monohydrate and sodium hydroxide to adjust the pH to 5.35."
},
{
"NDCCode": "71288-413-51",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (71288-413-51) / 100 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "71288-0413-51",
"ProductNDC": "71288-413",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eptifibatide",
"NonProprietaryName": "Eptifibatide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240509",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213599",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "EPTIFIBATIDE",
"StrengthNumber": ".75",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Platelet Aggregation [PE], Platelet Aggregation Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2024-05-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240509",
"SamplePackage": "N",
"IndicationAndUsage": "Eptifibatide Injection is a platelet aggregation inhibitor indicated for: : 1 Treatment of acute coronary syndrome (ACS) managed medically or with percutaneous coronary intervention (PCI) (1.1) , 2 Treatment of patients undergoing PCI (including intracoronary stenting) (1.2) .",
"Description": "Eptifibatide is a cyclic heptapeptide containing 6 amino acids and 1 mercaptopropionyl (des-amino cysteinyl) residue. An interchain disulfide bridge is formed between the cysteine amide and the mercaptopropionyl moieties. Chemically it is N6-(aminoiminomethyl)-N2-(3-mercapto-1-oxopropyl)-L-lysylglycyl-L-α-aspartyl-L-tryptophyl-L-prolyl-L-cysteinamide, cyclic (1→6)-disulfide. Eptifibatide binds to the platelet receptor glycoprotein (GP) IIb/IIIa of human platelets and inhibits platelet aggregation. The eptifibatide peptide is produced by solid-phase peptide synthesis, and is purified by preparative reverse-phase liquid chromatography and lyophilized. The structural formula is. Eptifibatide Injection is a clear, colorless, sterile, nonpyrogenic solution for intravenous (IV) use with an empirical formula of C35H49N11O9S2 and a molecular weight of 831.96. Each 10 mL single-dose vial contains 2 mg per mL of Eptifibatide Injection and each 100 mL single-dose vial contains 0.75 mg per mL of Eptifibatide Injection. Each vial of either size also contains 5.25 mg per mL citric acid monohydrate and sodium hydroxide to adjust the pH to 5.35."
},
{
"NDCCode": "71288-744-11",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (71288-744-11) / 10 mL in 1 VIAL, SINGLE-USE (71288-744-10) ",
"NDC11Code": "71288-0744-11",
"ProductNDC": "71288-744",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vecuronium Bromide",
"NonProprietaryName": "Vecuronium Bromide",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074688",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "VECURONIUM BROMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250701",
"SamplePackage": "N",
"IndicationAndUsage": "Vecuronium bromide for injection is indicated as an adjunct to general anesthesia, to facilitate endotracheal intubation and to provide skeletal muscle relaxation during surgery or mechanical ventilation.",
"Description": "Vecuronium bromide for injection is a nondepolarizing neuromuscular blocking agent of intermediate duration, chemically designated as piperidinium, 1-[(2β, 3α, 5α, 16β, 17β)-3, 17-bis(acetyloxy)-2-(1-piperidinyl) androstan-16-yl]-1-methyl-, bromide. The structural formula is. Its chemical formula is C34H57BrN2O4 with molecular weight 637.74. Vecuronium bromide for injection is supplied as a sterile nonpyrogenic freeze-dried buffered cake of very fine microscopic crystalline particles for intravenous injection only. Each 10 mL vial contains 10 mg vecuronium bromide, 20.75 mg citric acid anhydrous, 16.25 mg sodium phosphate dibasic anhydrous, 97 mg mannitol (to adjust tonicity), sodium hydroxide and/or phosphoric acid to buffer and adjust to a pH of 3.5 to 4.5. Each 20 mL vial contains 20 mg of vecuronium bromide, 41.5 mg citric acid anhydrous, 32.5 mg sodium phosphate dibasic anhydrous, 194 mg mannitol (to adjust tonicity), sodium hydroxide and/or phosphoric acid to buffer and adjust to a pH of 3.5 to 4.5. When reconstituted with bacteriostatic water for injection, USP, contains 0.9% w/v BENZYL ALCOHOL, WHICH IS NOT FOR USE IN NEWBORNS."
},
{
"NDCCode": "71288-745-21",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (71288-745-21) / 20 mL in 1 VIAL, SINGLE-USE (71288-745-20) ",
"NDC11Code": "71288-0745-21",
"ProductNDC": "71288-745",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vecuronium Bromide",
"NonProprietaryName": "Vecuronium Bromide",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074688",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "VECURONIUM BROMIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/20mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250701",
"SamplePackage": "N",
"IndicationAndUsage": "Vecuronium bromide for injection is indicated as an adjunct to general anesthesia, to facilitate endotracheal intubation and to provide skeletal muscle relaxation during surgery or mechanical ventilation.",
"Description": "Vecuronium bromide for injection is a nondepolarizing neuromuscular blocking agent of intermediate duration, chemically designated as piperidinium, 1-[(2β, 3α, 5α, 16β, 17β)-3, 17-bis(acetyloxy)-2-(1-piperidinyl) androstan-16-yl]-1-methyl-, bromide. The structural formula is. Its chemical formula is C34H57BrN2O4 with molecular weight 637.74. Vecuronium bromide for injection is supplied as a sterile nonpyrogenic freeze-dried buffered cake of very fine microscopic crystalline particles for intravenous injection only. Each 10 mL vial contains 10 mg vecuronium bromide, 20.75 mg citric acid anhydrous, 16.25 mg sodium phosphate dibasic anhydrous, 97 mg mannitol (to adjust tonicity), sodium hydroxide and/or phosphoric acid to buffer and adjust to a pH of 3.5 to 4.5. Each 20 mL vial contains 20 mg of vecuronium bromide, 41.5 mg citric acid anhydrous, 32.5 mg sodium phosphate dibasic anhydrous, 194 mg mannitol (to adjust tonicity), sodium hydroxide and/or phosphoric acid to buffer and adjust to a pH of 3.5 to 4.5. When reconstituted with bacteriostatic water for injection, USP, contains 0.9% w/v BENZYL ALCOHOL, WHICH IS NOT FOR USE IN NEWBORNS."
},
{
"NDCCode": "0078-0343-42",
"PackageDescription": "8 POUCH in 1 BOX (0078-0343-42) > 1 PATCH in 1 POUCH (0078-0343-62) > 3.5 d in 1 PATCH",
"NDC11Code": "00078-0343-42",
"ProductNDC": "0078-0343",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vivelle-dot",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "19990108",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020538",
"LabelerName": "Novartis Pharmaceuticals Corporation",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".0375",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-09-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20160331",
"SamplePackage": "N",
"IndicationAndUsage": "Vivelle-Dot is indicated for.",
"Description": "Vivelle-Dot (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of Vivelle-Dot are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Vivelle-Dot is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0078-0344-42",
"PackageDescription": "8 POUCH in 1 BOX (0078-0344-42) > 1 PATCH in 1 POUCH (0078-0344-62) > 3.5 d in 1 PATCH",
"NDC11Code": "00078-0344-42",
"ProductNDC": "0078-0344",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vivelle-dot",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "19990108",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020538",
"LabelerName": "Novartis Pharmaceuticals Corporation",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".05",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-09-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20160331",
"SamplePackage": "N",
"IndicationAndUsage": "Vivelle-Dot is indicated for.",
"Description": "Vivelle-Dot (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of Vivelle-Dot are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Vivelle-Dot is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0078-0345-42",
"PackageDescription": "8 POUCH in 1 BOX (0078-0345-42) > 1 PATCH in 1 POUCH (0078-0345-62) > 3.5 d in 1 PATCH",
"NDC11Code": "00078-0345-42",
"ProductNDC": "0078-0345",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vivelle-dot",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "19990108",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020538",
"LabelerName": "Novartis Pharmaceuticals Corporation",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".075",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-09-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20160331",
"SamplePackage": "N",
"IndicationAndUsage": "Vivelle-Dot is indicated for.",
"Description": "Vivelle-Dot (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of Vivelle-Dot are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Vivelle-Dot is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0078-0346-42",
"PackageDescription": "8 POUCH in 1 BOX (0078-0346-42) > 1 PATCH in 1 POUCH (0078-0346-62) > 3.5 d in 1 PATCH",
"NDC11Code": "00078-0346-42",
"ProductNDC": "0078-0346",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vivelle-dot",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "19990108",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020538",
"LabelerName": "Novartis Pharmaceuticals Corporation",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".1",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-09-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20160331",
"SamplePackage": "N",
"IndicationAndUsage": "Vivelle-Dot is indicated for.",
"Description": "Vivelle-Dot (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of Vivelle-Dot are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Vivelle-Dot is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0078-0365-42",
"PackageDescription": "8 POUCH in 1 BOX (0078-0365-42) > 1 PATCH in 1 POUCH (0078-0365-62) > 3.5 d in 1 PATCH",
"NDC11Code": "00078-0365-42",
"ProductNDC": "0078-0365",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vivelle-dot",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "19990108",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020538",
"LabelerName": "Novartis Pharmaceuticals Corporation",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".025",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-09-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20160427",
"SamplePackage": "N",
"IndicationAndUsage": "Vivelle-Dot is indicated for.",
"Description": "Vivelle-Dot (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of Vivelle-Dot are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Vivelle-Dot is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0378-3349-99",
"PackageDescription": "4 POUCH in 1 CARTON (0378-3349-99) / 1 PATCH in 1 POUCH (0378-3349-16) / 7 d in 1 PATCH",
"NDC11Code": "00378-3349-99",
"ProductNDC": "0378-3349",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20050407",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075182",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".025",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20050407",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system continuous delivery (once-weekly) is indicated for.",
"Description": "Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive."
},
{
"NDCCode": "0378-3350-99",
"PackageDescription": "4 POUCH in 1 CARTON (0378-3350-99) / 1 PATCH in 1 POUCH (0378-3350-16) / 7 d in 1 PATCH",
"NDC11Code": "00378-3350-99",
"ProductNDC": "0378-3350",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20000301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075182",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".05",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20000301",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system continuous delivery (once-weekly) is indicated for.",
"Description": "Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive."
},
{
"NDCCode": "0378-3351-99",
"PackageDescription": "4 POUCH in 1 CARTON (0378-3351-99) / 1 PATCH in 1 POUCH (0378-3351-16) / 7 d in 1 PATCH",
"NDC11Code": "00378-3351-99",
"ProductNDC": "0378-3351",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20050407",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075182",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".075",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20050407",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system continuous delivery (once-weekly) is indicated for.",
"Description": "Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive."
},
{
"NDCCode": "0378-3352-99",
"PackageDescription": "4 POUCH in 1 CARTON (0378-3352-99) / 1 PATCH in 1 POUCH (0378-3352-16) / 7 d in 1 PATCH",
"NDC11Code": "00378-3352-99",
"ProductNDC": "0378-3352",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20000301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075182",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".1",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20000301",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system continuous delivery (once-weekly) is indicated for.",
"Description": "Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive."
},
{
"NDCCode": "0378-3360-99",
"PackageDescription": "4 POUCH in 1 CARTON (0378-3360-99) / 1 PATCH in 1 POUCH (0378-3360-16) / 7 d in 1 PATCH",
"NDC11Code": "00378-3360-99",
"ProductNDC": "0378-3360",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20060809",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075182",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".0375",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20060809",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system continuous delivery (once-weekly) is indicated for.",
"Description": "Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive."
},
{
"NDCCode": "0378-3361-99",
"PackageDescription": "4 POUCH in 1 CARTON (0378-3361-99) / 1 PATCH in 1 POUCH (0378-3361-16) / 7 d in 1 PATCH",
"NDC11Code": "00378-3361-99",
"ProductNDC": "0378-3361",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20060809",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075182",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".06",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20060809",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system continuous delivery (once-weekly) is indicated for.",
"Description": "Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive."
},
{
"NDCCode": "0378-4619-26",
"PackageDescription": "8 POUCH in 1 CARTON (0378-4619-26) / 1 PATCH in 1 POUCH (0378-4619-16) / 3.5 d in 1 PATCH",
"NDC11Code": "00378-4619-26",
"ProductNDC": "0378-4619",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20181101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206685",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".025",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181101",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system (twice-weekly) is indicated for:.",
"Description": "Estradiol transdermal system, USP (twice-weekly) contains estradiol hemihydrate in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system (twice-weekly) are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm² and contains estradiol, USP hemihydrate equivalent to 0.41, 0.62, 0.82, 1.23, or 1.64 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. The structural formula is. The molecular formula of estradiol hemihydrate is C18H24O2 ½ H2O. The molecular weight is 281.39. Meets USP Drug Release Test 4. Estradiol transdermal system (twice-weekly) is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin backing film printed with brown ink, (2) an adhesive formulation containing estradiol, silicone adhesive, acrylic adhesive, dipropylene glycol, povidone, oleyl alcohol, and (3) an oversized slit polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0378-4620-26",
"PackageDescription": "8 POUCH in 1 CARTON (0378-4620-26) / 1 PATCH in 1 POUCH (0378-4620-16) / 3.5 d in 1 PATCH",
"NDC11Code": "00378-4620-26",
"ProductNDC": "0378-4620",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20181101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206685",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".0375",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181101",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system (twice-weekly) is indicated for:.",
"Description": "Estradiol transdermal system, USP (twice-weekly) contains estradiol hemihydrate in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system (twice-weekly) are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm² and contains estradiol, USP hemihydrate equivalent to 0.41, 0.62, 0.82, 1.23, or 1.64 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. The structural formula is. The molecular formula of estradiol hemihydrate is C18H24O2 ½ H2O. The molecular weight is 281.39. Meets USP Drug Release Test 4. Estradiol transdermal system (twice-weekly) is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin backing film printed with brown ink, (2) an adhesive formulation containing estradiol, silicone adhesive, acrylic adhesive, dipropylene glycol, povidone, oleyl alcohol, and (3) an oversized slit polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>71288-025-75</NDCCode>
<PackageDescription>1 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (71288-025-75) / 100 mL in 1 VIAL, PHARMACY BULK PACKAGE</PackageDescription>
<NDC11Code>71288-0025-75</NDC11Code>
<ProductNDC>71288-025</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220727</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215196</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-10-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220727</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin hydrochloride-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), Vancomycin Hydrochloride for Injection has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin hydrochloride. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection and other antibacterial drugs, Vancomycin Hydrochloride for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin hydrochloride is not effective by the oral route for other types of infections.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection, USP, is a white or off-white to light tan-colored lyophilized powder or cake, for preparing intravenous (IV) infusions, in Pharmacy Bulk Package bottles containing the equivalent of 5 grams or 10 grams vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg per mL for the 5 gram Pharmacy Bulk Package bottle and 100 mg per mL for the 10 gram Pharmacy Bulk Package bottle, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is [3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (see DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package). FURTHER DILUTION IS REQUIRED. NOT FOR DIRECT INFUSION.</Description>
</NDC>
<NDC>
<NDCCode>71288-007-75</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (71288-007-75) / 1 INJECTION, POWDER, FOR SOLUTION in 1 BOTTLE</PackageDescription>
<NDC11Code>71288-0007-75</NDC11Code>
<ProductNDC>71288-007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin And Sulbactam</ProprietaryName>
<NonProprietaryName>Ampicillin Sodium And Sulbactam Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20181217</StartMarketingDate>
<EndMarketingDate>20240731</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090578</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>AMPICILLIN SODIUM; SULBACTAM SODIUM</SubstanceName>
<StrengthNumber>10; 5</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20181217</StartMarketingDatePackage>
<EndMarketingDatePackage>20240731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin and sulbactam for injection is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below.</IndicationAndUsage>
<Description>Ampicillin and Sulbactam for Injection, USP is an injectable antibacterial combination consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S,5R,6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection, USP, ampicillin sodium/sulbactam sodium parenteral combination, is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8.0 and 10.0. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Ampicillin and Sulbactam for Injection, USP pharmacy bulk package is a vial containing a sterile preparation of ampicillin sodium and sulbactam sodium for parenteral use that contains many single doses. The Pharmacy Bulk Package is for use in a pharmacy admixture setting; it provides many single doses of Ampicillin and Sulbactam for Injection, USP for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (see DIRECTIONS FOR USE - Directions for Proper Use of Pharmacy Bulk Package).</Description>
</NDC>
<NDC>
<NDCCode>71288-026-75</NDCCode>
<PackageDescription>1 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (71288-026-75) / 95 mL in 1 VIAL, PHARMACY BULK PACKAGE</PackageDescription>
<NDC11Code>71288-0026-75</NDC11Code>
<ProductNDC>71288-026</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220727</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215196</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/95mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-10-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220727</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin hydrochloride-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), Vancomycin Hydrochloride for Injection has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin hydrochloride. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection and other antibacterial drugs, Vancomycin Hydrochloride for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin hydrochloride is not effective by the oral route for other types of infections.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection, USP, is a white or off-white to light tan-colored lyophilized powder or cake, for preparing intravenous (IV) infusions, in Pharmacy Bulk Package bottles containing the equivalent of 5 grams or 10 grams vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg per mL for the 5 gram Pharmacy Bulk Package bottle and 100 mg per mL for the 10 gram Pharmacy Bulk Package bottle, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is [3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (see DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package). FURTHER DILUTION IS REQUIRED. NOT FOR DIRECT INFUSION.</Description>
</NDC>
<NDC>
<NDCCode>71288-033-75</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (71288-033-75) / 1 INJECTION, POWDER, FOR SOLUTION in 1 BOTTLE</PackageDescription>
<NDC11Code>71288-0033-75</NDC11Code>
<ProductNDC>71288-033</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin And Sulbactam</ProprietaryName>
<NonProprietaryName>Ampicillin Sodium And Sulbactam Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20061127</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065403</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>AMPICILLIN SODIUM; SULBACTAM SODIUM</SubstanceName>
<StrengthNumber>10; 5</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20061127</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin and Sulbactam for Injection is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below.</IndicationAndUsage>
<Description>Ampicillin and Sulbactam for Injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium issodium penicillinate sulfone; sodium (2S,5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection, USP is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions. The pH of the solutions is between 8 and 10. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 15 g sterile Pharmacy Bulk Package contains ampicillin 10 g and sulbactam 5 g (equivalent to 10.629 g ampicillin sodium and 5.470 g sulbactam sodium). Each sterile Pharmacy Bulk Package contains approximately 1150 mg of sodium. Ampicillin and Sulbactam for Injection, USP Pharmacy Bulk Package is a bottle containing a sterile preparation for parenteral use. The Pharmacy Bulk Package is for use in a pharmacy admixture setting; it provides many single doses of Ampicillin and Sulbactam for Injection, USP for additionto suitable parenteral fluids in the preparation of admixtures for intravenous infusion. (See DIRECTIONS FOR USE - Directions for Proper Use of Pharmacy Bulk Package section). FURTHER DILUTION IS REQUIRED BEFORE USE.</Description>
</NDC>
<NDC>
<NDCCode>71288-170-75</NDCCode>
<PackageDescription>1 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (71288-170-75) / 50 mL in 1 VIAL, PHARMACY BULK PACKAGE</PackageDescription>
<NDC11Code>71288-0170-75</NDC11Code>
<ProductNDC>71288-170</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluorouracil</ProprietaryName>
<NonProprietaryName>Fluorouracil</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240924</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216494</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>FLUOROURACIL</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240924</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluorouracil Injection is indicated for the treatment of patients with:.</IndicationAndUsage>
<Description>Fluorouracil Injection, USP, a nucleoside metabolic inhibitor, is a clear and colorless to faint yellow, aqueous, sterile, nonpyrogenic injectable solution available in 50 mL pharmacy bulk package, a sterile preparation that contains doses for multiple patients for intravenous administration. Each mL contains 50 mg fluorouracil, USP in water for injection, USP. The pH is adjusted to approximately 9.2 with sodium hydroxide, NF. Chemically, fluorouracil, a fluorinated pyrimidine, is 5-fluoro-2,4 (1H,3H)-pyrimidinedione. Its structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>71288-808-76</NDCCode>
<PackageDescription>10 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (71288-808-76) > 5 mL in 1 VIAL, PHARMACY BULK PACKAGE (71288-808-75) </PackageDescription>
<NDC11Code>71288-0808-76</NDC11Code>
<ProductNDC>71288-808</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenylephrine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenylephrine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180427</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210333</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-12-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180427</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phenylephrine Hydrochloride Injection is indicated for the treatment of clinically important hypotension resulting primarily from vasodilation in the setting of anesthesia.</IndicationAndUsage>
<Description>Phenylephrine is an alpha-1 adrenergic receptor agonist. Phenylephrine Hydrochloride Injection, USP 10 mg per mL, is a sterile, nonpyrogenic solution for intravenous use. It must be diluted before administration as an intravenous bolus or continuous intravenous infusion. The chemical name of phenylephrine hydrochloride is (-)-m-hydroxy-α- [(methylamino)methyl]benzyl alcohol hydrochloride and is chemically designated as C9H14ClNO2 with a molecular weight of 203.66 g/mol. Its structural formula is depicted below:. Phenylephrine hydrochloride is soluble in water and ethanol, and insoluble in chloroform and ethyl ether. Phenylephrine Hydrochloride Injection, USP, 10 mg per mL, is a clear, colorless solution and is sensitive to light. Each mL contains: phenylephrine hydrochloride 10 mg, sodium chloride 3.5 mg, sodium citrate dihydrate 4 mg, citric acid monohydrate 1 mg, and sodium metabisulfite 2 mg in water for injection. The pH is adjusted with sodium hydroxide and/or hydrochloric acid if necessary. The pH range is 3.5-5.5.</Description>
</NDC>
<NDC>
<NDCCode>10345-025-01</NDCCode>
<PackageDescription>1 BOTTLE in 1 PACKAGE (10345-025-01) > 75 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>10345-0025-01</NDC11Code>
<ProductNDC>10345-025</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Immortelle Brightening Hand Care Spf 15</ProprietaryName>
<NonProprietaryName>Octinoxate, Octisalate, Avobenzone, Octocrylene</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20110913</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>LABORATOIRES M&L</LabelerName>
<SubstanceName>OCTINOXATE; OCTISALATE; AVOBENZONE; OCTOCRYLENE</SubstanceName>
<StrengthNumber>75; 50; 30; 26</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>12022-025-00</NDCCode>
<PackageDescription>75 mL in 1 BOTTLE (12022-025-00) </PackageDescription>
<NDC11Code>12022-0025-00</NDC11Code>
<ProductNDC>12022-025</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sulfur 8 Loc Twist And Braid Scalp</ProprietaryName>
<NonProprietaryName>Salicylic Acid</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20030519</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M032</ApplicationNumber>
<LabelerName>J. Strickland & Co.</LabelerName>
<SubstanceName>SALICYLIC ACID</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-10-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20030519</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>relieves scalp itching, irritation, redness, scaling and flaking associated with dandruff.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>52533-025-75</NDCCode>
<PackageDescription>100 mL in 1 BAG (52533-025-75)</PackageDescription>
<NDC11Code>52533-0025-75</NDC11Code>
<ProductNDC>52533-025</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fentanyl Citrate</ProprietaryName>
<NonProprietaryName>Fentanyl Citrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20130130</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Cantrell Drug Company</LabelerName>
<SubstanceName>FENTANYL CITRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>59651-025-75</NDCCode>
<PackageDescription>75 mL in 1 BOTTLE (59651-025-75) </PackageDescription>
<NDC11Code>59651-0025-75</NDC11Code>
<ProductNDC>59651-025</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin And Clavulanate Potassium</ProprietaryName>
<NonProprietaryName>Amoxicillin And Clavulanate Potassium</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190419</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209371</ApplicationNumber>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>AMOXICILLIN; CLAVULANATE POTASSIUM</SubstanceName>
<StrengthNumber>125; 31.25</StrengthNumber>
<StrengthUnit>mg/5mL; mg/5mL</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190419</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amoxicillin and clavulanate potassium for oral suspension is a combination of amoxicillin, a penicillin-class antibacterial and clavulanate potassium, a beta-lactamase inhibitor, indicated for the treatment of infections caused by designated susceptible (confirmed or suspected) beta-lactamase-producing microorganisms (1). Lower Respiratory Tract Infections (1.1): 1 Amoxicillin and Clavulanate Potassium for Oral Suspension: pediatric patients weighing less than 40 kg, and in adult and pediatric patients who cannot swallow tablets.</IndicationAndUsage>
<Description>Amoxicillin and clavulanate potassium for oral suspension, USP is an oral antibacterial combination consisting of the semisynthetic antibacterial amoxicillin and the beta-lactamase inhibitor, clavulanate potassium (the potassium salt of clavulanic acid). : 1 In amoxicillin and clavulanate potassium for oral suspension, USP, amoxicillin is present as amoxicillin trihydrate.</Description>
</NDC>
<NDC>
<NDCCode>67544-025-75</NDCCode>
<PackageDescription>150 TABLET in 1 BOTTLE, PLASTIC (67544-025-75)</PackageDescription>
<NDC11Code>67544-0025-75</NDC11Code>
<ProductNDC>67544-025</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocodone Bitartrate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Hydrocodone Bitartrate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100422</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040201</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, Inc.</LabelerName>
<SubstanceName>HYDROCODONE BITARTRATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>10; 500</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC],Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-12-28</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>82652-021-01</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (82652-021-01) * 1 TABLET, FILM COATED in 1 PACKET (82652-022-01) * 2 TABLET, FILM COATED in 1 PACKET (82652-025-01) * 2 TABLET in 1 PACKET (82652-030-01) * 2 TABLET in 1 PACKET * 1 TABLET, FILM COATED in 1 PACKET (82652-031-01) * 2 TABLET in 1 PACKET (82652-032-01) * 2 TABLET, CHEWABLE in 1 PACKET (82652-026-01) * 2 TABLET, FILM COATED in 1 PACKET (82652-024-01) * 2 TABLET, CHEWABLE in 1 PACKET (82652-023-01) * .5 g in 1 PACKET (82652-028-01) * .9 g in 1 PACKET (82652-027-01) * .9 g in 1 PACKET (82652-029-01) * .75 g in 1 PACKET (82652-033-01) </PackageDescription>
<NDC11Code>82652-0021-01</NDC11Code>
<ProductNDC>82652-021</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Diphen</ProprietaryName>
<NonProprietaryName>Benzocaine, Benzalkonium Chloride, Lidocaine Hydrochloride, Hydrocortisone, Bacitracin Zinc, Neomycin Sulfate, Polymyxin B Sulfate, Calcium Carbonate, Ibuprofen, Loratadine, Acetaminophen, Dextromethorphan Hydrobromide, Guaifenesin, Phenylephrine Hydrochloride, Diphenhydramine Hydrochloride, Potassium Chloride, Magnesium Oxide, Meclizine Hydrochloride, And Bismuth Subsalicylate</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20220510</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076134</ApplicationNumber>
<LabelerName>Remedy Pack LLC</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220510</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>84753-025-01</NDCCode>
<PackageDescription>75 g in 1 BOTTLE, PLASTIC (84753-025-01) </PackageDescription>
<NDC11Code>84753-0025-01</NDC11Code>
<ProductNDC>84753-025</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Solid Deodorant Stick</ProprietaryName>
<NonProprietaryName>Solid Deodorant Stick</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>CUTANEOUS</RouteName>
<StartMarketingDate>20241009</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>505G(a)(3)</ApplicationNumber>
<LabelerName>Guangdong Bisutang Biotechnology Co., Ltd.</LabelerName>
<SubstanceName>ETHYLHEXYL PALMITATE</SubstanceName>
<StrengthNumber>29</StrengthNumber>
<StrengthUnit>g/75g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241009</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Temporarily protects and helps relieve dry or cracked skin Beneficlal for face, hands, body, and legs.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>71288-412-10</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (71288-412-10) / 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>71288-0412-10</NDC11Code>
<ProductNDC>71288-412</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eptifibatide</ProprietaryName>
<NonProprietaryName>Eptifibatide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240509</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213599</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>EPTIFIBATIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Platelet Aggregation [PE], Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240509</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Eptifibatide Injection is a platelet aggregation inhibitor indicated for: : 1 Treatment of acute coronary syndrome (ACS) managed medically or with percutaneous coronary intervention (PCI) (1.1) , 2 Treatment of patients undergoing PCI (including intracoronary stenting) (1.2) .</IndicationAndUsage>
<Description>Eptifibatide is a cyclic heptapeptide containing 6 amino acids and 1 mercaptopropionyl (des-amino cysteinyl) residue. An interchain disulfide bridge is formed between the cysteine amide and the mercaptopropionyl moieties. Chemically it is N6-(aminoiminomethyl)-N2-(3-mercapto-1-oxopropyl)-L-lysylglycyl-L-α-aspartyl-L-tryptophyl-L-prolyl-L-cysteinamide, cyclic (1→6)-disulfide. Eptifibatide binds to the platelet receptor glycoprotein (GP) IIb/IIIa of human platelets and inhibits platelet aggregation. The eptifibatide peptide is produced by solid-phase peptide synthesis, and is purified by preparative reverse-phase liquid chromatography and lyophilized. The structural formula is. Eptifibatide Injection is a clear, colorless, sterile, nonpyrogenic solution for intravenous (IV) use with an empirical formula of C35H49N11O9S2 and a molecular weight of 831.96. Each 10 mL single-dose vial contains 2 mg per mL of Eptifibatide Injection and each 100 mL single-dose vial contains 0.75 mg per mL of Eptifibatide Injection. Each vial of either size also contains 5.25 mg per mL citric acid monohydrate and sodium hydroxide to adjust the pH to 5.35.</Description>
</NDC>
<NDC>
<NDCCode>71288-413-51</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (71288-413-51) / 100 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>71288-0413-51</NDC11Code>
<ProductNDC>71288-413</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eptifibatide</ProprietaryName>
<NonProprietaryName>Eptifibatide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240509</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213599</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>EPTIFIBATIDE</SubstanceName>
<StrengthNumber>.75</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Platelet Aggregation [PE], Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240509</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Eptifibatide Injection is a platelet aggregation inhibitor indicated for: : 1 Treatment of acute coronary syndrome (ACS) managed medically or with percutaneous coronary intervention (PCI) (1.1) , 2 Treatment of patients undergoing PCI (including intracoronary stenting) (1.2) .</IndicationAndUsage>
<Description>Eptifibatide is a cyclic heptapeptide containing 6 amino acids and 1 mercaptopropionyl (des-amino cysteinyl) residue. An interchain disulfide bridge is formed between the cysteine amide and the mercaptopropionyl moieties. Chemically it is N6-(aminoiminomethyl)-N2-(3-mercapto-1-oxopropyl)-L-lysylglycyl-L-α-aspartyl-L-tryptophyl-L-prolyl-L-cysteinamide, cyclic (1→6)-disulfide. Eptifibatide binds to the platelet receptor glycoprotein (GP) IIb/IIIa of human platelets and inhibits platelet aggregation. The eptifibatide peptide is produced by solid-phase peptide synthesis, and is purified by preparative reverse-phase liquid chromatography and lyophilized. The structural formula is. Eptifibatide Injection is a clear, colorless, sterile, nonpyrogenic solution for intravenous (IV) use with an empirical formula of C35H49N11O9S2 and a molecular weight of 831.96. Each 10 mL single-dose vial contains 2 mg per mL of Eptifibatide Injection and each 100 mL single-dose vial contains 0.75 mg per mL of Eptifibatide Injection. Each vial of either size also contains 5.25 mg per mL citric acid monohydrate and sodium hydroxide to adjust the pH to 5.35.</Description>
</NDC>
<NDC>
<NDCCode>71288-744-11</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (71288-744-11) / 10 mL in 1 VIAL, SINGLE-USE (71288-744-10) </PackageDescription>
<NDC11Code>71288-0744-11</NDC11Code>
<ProductNDC>71288-744</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vecuronium Bromide</ProprietaryName>
<NonProprietaryName>Vecuronium Bromide</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074688</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>VECURONIUM BROMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vecuronium bromide for injection is indicated as an adjunct to general anesthesia, to facilitate endotracheal intubation and to provide skeletal muscle relaxation during surgery or mechanical ventilation.</IndicationAndUsage>
<Description>Vecuronium bromide for injection is a nondepolarizing neuromuscular blocking agent of intermediate duration, chemically designated as piperidinium, 1-[(2β, 3α, 5α, 16β, 17β)-3, 17-bis(acetyloxy)-2-(1-piperidinyl) androstan-16-yl]-1-methyl-, bromide. The structural formula is. Its chemical formula is C34H57BrN2O4 with molecular weight 637.74. Vecuronium bromide for injection is supplied as a sterile nonpyrogenic freeze-dried buffered cake of very fine microscopic crystalline particles for intravenous injection only. Each 10 mL vial contains 10 mg vecuronium bromide, 20.75 mg citric acid anhydrous, 16.25 mg sodium phosphate dibasic anhydrous, 97 mg mannitol (to adjust tonicity), sodium hydroxide and/or phosphoric acid to buffer and adjust to a pH of 3.5 to 4.5. Each 20 mL vial contains 20 mg of vecuronium bromide, 41.5 mg citric acid anhydrous, 32.5 mg sodium phosphate dibasic anhydrous, 194 mg mannitol (to adjust tonicity), sodium hydroxide and/or phosphoric acid to buffer and adjust to a pH of 3.5 to 4.5. When reconstituted with bacteriostatic water for injection, USP, contains 0.9% w/v BENZYL ALCOHOL, WHICH IS NOT FOR USE IN NEWBORNS.</Description>
</NDC>
<NDC>
<NDCCode>71288-745-21</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (71288-745-21) / 20 mL in 1 VIAL, SINGLE-USE (71288-745-20) </PackageDescription>
<NDC11Code>71288-0745-21</NDC11Code>
<ProductNDC>71288-745</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vecuronium Bromide</ProprietaryName>
<NonProprietaryName>Vecuronium Bromide</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074688</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>VECURONIUM BROMIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/20mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vecuronium bromide for injection is indicated as an adjunct to general anesthesia, to facilitate endotracheal intubation and to provide skeletal muscle relaxation during surgery or mechanical ventilation.</IndicationAndUsage>
<Description>Vecuronium bromide for injection is a nondepolarizing neuromuscular blocking agent of intermediate duration, chemically designated as piperidinium, 1-[(2β, 3α, 5α, 16β, 17β)-3, 17-bis(acetyloxy)-2-(1-piperidinyl) androstan-16-yl]-1-methyl-, bromide. The structural formula is. Its chemical formula is C34H57BrN2O4 with molecular weight 637.74. Vecuronium bromide for injection is supplied as a sterile nonpyrogenic freeze-dried buffered cake of very fine microscopic crystalline particles for intravenous injection only. Each 10 mL vial contains 10 mg vecuronium bromide, 20.75 mg citric acid anhydrous, 16.25 mg sodium phosphate dibasic anhydrous, 97 mg mannitol (to adjust tonicity), sodium hydroxide and/or phosphoric acid to buffer and adjust to a pH of 3.5 to 4.5. Each 20 mL vial contains 20 mg of vecuronium bromide, 41.5 mg citric acid anhydrous, 32.5 mg sodium phosphate dibasic anhydrous, 194 mg mannitol (to adjust tonicity), sodium hydroxide and/or phosphoric acid to buffer and adjust to a pH of 3.5 to 4.5. When reconstituted with bacteriostatic water for injection, USP, contains 0.9% w/v BENZYL ALCOHOL, WHICH IS NOT FOR USE IN NEWBORNS.</Description>
</NDC>
<NDC>
<NDCCode>0078-0343-42</NDCCode>
<PackageDescription>8 POUCH in 1 BOX (0078-0343-42) > 1 PATCH in 1 POUCH (0078-0343-62) > 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00078-0343-42</NDC11Code>
<ProductNDC>0078-0343</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vivelle-dot</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>19990108</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020538</ApplicationNumber>
<LabelerName>Novartis Pharmaceuticals Corporation</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.0375</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-09-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160331</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vivelle-Dot is indicated for.</IndicationAndUsage>
<Description>Vivelle-Dot (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of Vivelle-Dot are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Vivelle-Dot is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0078-0344-42</NDCCode>
<PackageDescription>8 POUCH in 1 BOX (0078-0344-42) > 1 PATCH in 1 POUCH (0078-0344-62) > 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00078-0344-42</NDC11Code>
<ProductNDC>0078-0344</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vivelle-dot</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>19990108</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020538</ApplicationNumber>
<LabelerName>Novartis Pharmaceuticals Corporation</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-09-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160331</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vivelle-Dot is indicated for.</IndicationAndUsage>
<Description>Vivelle-Dot (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of Vivelle-Dot are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Vivelle-Dot is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0078-0345-42</NDCCode>
<PackageDescription>8 POUCH in 1 BOX (0078-0345-42) > 1 PATCH in 1 POUCH (0078-0345-62) > 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00078-0345-42</NDC11Code>
<ProductNDC>0078-0345</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vivelle-dot</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>19990108</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020538</ApplicationNumber>
<LabelerName>Novartis Pharmaceuticals Corporation</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.075</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-09-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160331</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vivelle-Dot is indicated for.</IndicationAndUsage>
<Description>Vivelle-Dot (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of Vivelle-Dot are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Vivelle-Dot is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0078-0346-42</NDCCode>
<PackageDescription>8 POUCH in 1 BOX (0078-0346-42) > 1 PATCH in 1 POUCH (0078-0346-62) > 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00078-0346-42</NDC11Code>
<ProductNDC>0078-0346</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vivelle-dot</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>19990108</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020538</ApplicationNumber>
<LabelerName>Novartis Pharmaceuticals Corporation</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-09-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160331</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vivelle-Dot is indicated for.</IndicationAndUsage>
<Description>Vivelle-Dot (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of Vivelle-Dot are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Vivelle-Dot is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0078-0365-42</NDCCode>
<PackageDescription>8 POUCH in 1 BOX (0078-0365-42) > 1 PATCH in 1 POUCH (0078-0365-62) > 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00078-0365-42</NDC11Code>
<ProductNDC>0078-0365</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vivelle-dot</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>19990108</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020538</ApplicationNumber>
<LabelerName>Novartis Pharmaceuticals Corporation</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.025</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-09-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160427</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vivelle-Dot is indicated for.</IndicationAndUsage>
<Description>Vivelle-Dot (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of Vivelle-Dot are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Vivelle-Dot is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0378-3349-99</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (0378-3349-99) / 1 PATCH in 1 POUCH (0378-3349-16) / 7 d in 1 PATCH</PackageDescription>
<NDC11Code>00378-3349-99</NDC11Code>
<ProductNDC>0378-3349</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20050407</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075182</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.025</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050407</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system continuous delivery (once-weekly) is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0378-3350-99</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (0378-3350-99) / 1 PATCH in 1 POUCH (0378-3350-16) / 7 d in 1 PATCH</PackageDescription>
<NDC11Code>00378-3350-99</NDC11Code>
<ProductNDC>0378-3350</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20000301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075182</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20000301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system continuous delivery (once-weekly) is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0378-3351-99</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (0378-3351-99) / 1 PATCH in 1 POUCH (0378-3351-16) / 7 d in 1 PATCH</PackageDescription>
<NDC11Code>00378-3351-99</NDC11Code>
<ProductNDC>0378-3351</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20050407</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075182</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.075</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050407</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system continuous delivery (once-weekly) is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0378-3352-99</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (0378-3352-99) / 1 PATCH in 1 POUCH (0378-3352-16) / 7 d in 1 PATCH</PackageDescription>
<NDC11Code>00378-3352-99</NDC11Code>
<ProductNDC>0378-3352</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20000301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075182</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20000301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system continuous delivery (once-weekly) is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0378-3360-99</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (0378-3360-99) / 1 PATCH in 1 POUCH (0378-3360-16) / 7 d in 1 PATCH</PackageDescription>
<NDC11Code>00378-3360-99</NDC11Code>
<ProductNDC>0378-3360</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20060809</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075182</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.0375</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060809</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system continuous delivery (once-weekly) is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0378-3361-99</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (0378-3361-99) / 1 PATCH in 1 POUCH (0378-3361-16) / 7 d in 1 PATCH</PackageDescription>
<NDC11Code>00378-3361-99</NDC11Code>
<ProductNDC>0378-3361</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20060809</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075182</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.06</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060809</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system continuous delivery (once-weekly) is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0378-4619-26</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (0378-4619-26) / 1 PATCH in 1 POUCH (0378-4619-16) / 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00378-4619-26</NDC11Code>
<ProductNDC>0378-4619</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20181101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206685</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.025</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system (twice-weekly) is indicated for:.</IndicationAndUsage>
<Description>Estradiol transdermal system, USP (twice-weekly) contains estradiol hemihydrate in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system (twice-weekly) are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm² and contains estradiol, USP hemihydrate equivalent to 0.41, 0.62, 0.82, 1.23, or 1.64 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. The structural formula is. The molecular formula of estradiol hemihydrate is C18H24O2 ½ H2O. The molecular weight is 281.39. Meets USP Drug Release Test 4. Estradiol transdermal system (twice-weekly) is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin backing film printed with brown ink, (2) an adhesive formulation containing estradiol, silicone adhesive, acrylic adhesive, dipropylene glycol, povidone, oleyl alcohol, and (3) an oversized slit polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0378-4620-26</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (0378-4620-26) / 1 PATCH in 1 POUCH (0378-4620-16) / 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00378-4620-26</NDC11Code>
<ProductNDC>0378-4620</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20181101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206685</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.0375</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system (twice-weekly) is indicated for:.</IndicationAndUsage>
<Description>Estradiol transdermal system, USP (twice-weekly) contains estradiol hemihydrate in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system (twice-weekly) are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm² and contains estradiol, USP hemihydrate equivalent to 0.41, 0.62, 0.82, 1.23, or 1.64 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. The structural formula is. The molecular formula of estradiol hemihydrate is C18H24O2 ½ H2O. The molecular weight is 281.39. Meets USP Drug Release Test 4. Estradiol transdermal system (twice-weekly) is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin backing film printed with brown ink, (2) an adhesive formulation containing estradiol, silicone adhesive, acrylic adhesive, dipropylene glycol, povidone, oleyl alcohol, and (3) an oversized slit polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
</NDCList>