{
"NDC": [
{
"NDCCode": "71288-137-20",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (71288-137-20) > 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "71288-0137-20",
"ProductNDC": "71288-137",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mitomycin",
"NonProprietaryName": "Mitomycin",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220908",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214505",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "MITOMYCIN",
"StrengthNumber": "5",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Alkylating Activity [MoA], Alkylating Drug [EPC]",
"Status": "Active",
"LastUpdate": "2022-09-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220908",
"SamplePackage": "N",
"IndicationAndUsage": "Mitomycin for Injection is not recommended as single-agent, primary therapy. It has been shown to be useful in the therapy of disseminated adenocarcinoma of the stomach or pancreas in proven combinations with other approved chemotherapeutic agents and as palliative treatment when other modalities have failed. Mitomycin for Injection is not recommended to replace appropriate surgery and/or radiotherapy.",
"Description": "Mitomycin (also known as mitomycin and/or mitomycin-C) is an antibiotic isolated from the broth of Streptomyces caespitosus which has been shown to have antitumor activity. The compound is heat stable, has a high melting point, and is freely soluble in organic solvents. Mitomycin for Injection, USP is a sterile dry mixture of mitomycin and mannitol, which when reconstituted with Sterile Water for Injection provides a solution for intravenous administration. Each single-dose vial contains either mitomycin 5 mg and mannitol 10 mg or mitomycin 20 mg and mannitol 40 mg. Each mL of reconstituted solution will contain 0.5 mg mitomycin and have a pH between 6.0 and 8.0. Mitomycin is a blue-violet crystalline powder with the molecular formula of C15H18N4O5, and a molecular weight of 334.33. Its chemical name is 7-amino-9α-methoxymitosane and it has the following structural formula:."
},
{
"NDCCode": "12784-137-20",
"PackageDescription": "205 kg in 1 CONTAINER (12784-137-20) ",
"NDC11Code": "12784-0137-20",
"ProductNDC": "12784-137",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Aluminum Hydroxide",
"DosageFormName": "GEL",
"StartMarketingDate": "20140724",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "SPI Pharma, Inc.",
"SubstanceName": "ALUMINUM HYDROXIDE",
"StrengthNumber": "15",
"StrengthUnit": "kg/100kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "24-JUL-14"
},
{
"NDCCode": "13668-137-20",
"PackageDescription": "2000 TABLET, FILM COATED in 1 BOTTLE (13668-137-20) ",
"NDC11Code": "13668-0137-20",
"ProductNDC": "13668-137",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Escitalopram",
"NonProprietaryName": "Escitalopram",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120911",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090939",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "ESCITALOPRAM OXALATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-02-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120911",
"SamplePackage": "N",
"IndicationAndUsage": "Escitalopram is a selective serotonin reuptake inhibitor (SSRI) indicated for the: treatment of major depressive disorder (MDD) in adults and pediatric patients 12 years of age and older (1) treatment of generalized anxiety disorder (GAD) in adults (1).",
"Description": "Escitalopram tablets contain escitalopram, a selective serotonin reuptake inhibitor (SSRI), present as escitalopram oxalate salt. Escitalopram is the pure S- enantiomer (single isomer) of the racemic bicyclic phthalane derivative citalopram. Escitalopram oxalate is designated S-(+)-1- [3-(dimethyl-amino)propyl]-1-(p-fluorophenyl)-5-phthalancarbonitrile oxalate with the following structural formula. The molecular formula is C20H 21FN2O C2H2O4 and the molecular weight is 414.40. Escitalopram oxalate, USP occurs as a fine, white to slightly-yellow powder and is freely soluble in methanol and dimethyl sulfoxide (DMSO), soluble in isotonic saline solution, sparingly soluble in water and ethanol, slightly soluble in ethyl acetate, and insoluble in heptane. Escitalopram tablets, USP are white to off-white, round, biconvex, film-coated tablets containing 6.38 mg, 12.75 mg and 25.55 mg escitalopram oxalate in strengths equivalent to 5 mg, 10 mg, and 20 mg, respectively, of escitalopram base. The 10 and 20 mg tablets are scored. The tablets also contain the following inactive ingredients: cellulose microcrystalline, colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, povidone and talc. The film coating contains hypromellose, polyethylene glycol 400 and titanium dioxide. Meets USP Dissolution Test 2."
},
{
"NDCCode": "14789-137-05",
"PackageDescription": "25 VIAL, GLASS in 1 CARTON (14789-137-05) / 20 mL in 1 VIAL, GLASS (14789-137-07) ",
"NDC11Code": "14789-0137-05",
"ProductNDC": "14789-137",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride",
"NonProprietaryName": "Potassium Chloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230912",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217704",
"LabelerName": "Nexus Pharmaceuticals LLC",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "149",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-04-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230912",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium Chloride for Injection Concentrate, USP is indicated in the treatment of potassium deficiency states when oral replacement is not feasible.",
"Description": "Potassium Chloride for Injection Concentrate, USP, is a sterile, nonpyrogenic, concentrated solution of potassium chloride, USP in water for injection administered by intravenous infusion only after dilution in a larger volume of fluid. They are provided in the following variety of concentrations and sizes comprising a choice of single-dose containers, all designed to provide the commonly prescribed amounts of potassium chloride for single-dose infusion after dilution in suitable large volume parenterals. The solutions contain no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and each is intended only for single-dose injection (after dilution). When smaller doses are required, discard the unused portion. The pH is 4.6 (4.0 to 8.0). Potassium Chloride for Injection Concentrate, USP (appropriately diluted) is a parenteral fluid and electrolyte replenisher. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water."
},
{
"NDCCode": "25021-137-20",
"PackageDescription": "10 VIAL in 1 CARTON (25021-137-20) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL",
"NDC11Code": "25021-0137-20",
"ProductNDC": "25021-137",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin",
"NonProprietaryName": "Ampicillin",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20140701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090354",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "AMPICILLIN SODIUM",
"StrengthNumber": "2",
"StrengthUnit": "g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140701",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:. Respiratory Tract Infections caused by Streptococcus pneumoniae, Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic Streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.",
"Description": "Ampicillin for Injection, USP the monosodium salt of [2S-[2α, 5α, 6β(S*)]]-6- [(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure:. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10."
},
{
"NDCCode": "36800-137-20",
"PackageDescription": "20 BLISTER PACK in 1 CARTON (36800-137-20) / 1 TABLET in 1 BLISTER PACK",
"NDC11Code": "36800-0137-20",
"ProductNDC": "36800-137",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Mucus Relief",
"NonProprietaryName": "Guaifenesin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190331",
"EndMarketingDate": "20260728",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207342",
"LabelerName": "TOP CARE (Topco Associates LLC)",
"SubstanceName": "GUAIFENESIN",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Respiratory Secretion Viscosity [PE], Expectorant [EPC], Increased Respiratory Secretions [PE]",
"Status": "Deprecated",
"LastUpdate": "2026-07-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20190331",
"EndMarketingDatePackage": "20260728",
"SamplePackage": "N",
"IndicationAndUsage": "Helps loosen phlegm (mucus) and thin bronchial secretions to rid the bronchial passageways of bothersome mucus and makes coughs more productive."
},
{
"NDCCode": "42023-137-10",
"PackageDescription": "10 VIAL in 1 CARTON (42023-137-10) > 20 mL in 1 VIAL",
"NDC11Code": "42023-0137-10",
"ProductNDC": "42023-137",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketamine Hydrochloride",
"NonProprietaryName": "Ketamine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20120601",
"EndMarketingDate": "20180506",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA016812",
"LabelerName": "Par Pharmaceutical Inc.",
"SubstanceName": "KETAMINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "General Anesthesia [PE],General Anesthetic [EPC]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2018-05-10",
"ProductNdcExcludeFlag": "N"
},
{
"NDCCode": "45634-137-20",
"PackageDescription": "82 g in 1 BOTTLE, GLASS (45634-137-20) ",
"NDC11Code": "45634-0137-20",
"ProductNDC": "45634-137",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "High Potency Classics Face Finishing And Firming Tinted Moisturizer Spf 30",
"NonProprietaryName": "Titanium Dioxide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20220404",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "M020",
"LabelerName": "N.V Perricone LLC",
"SubstanceName": "TITANIUM DIOXIDE",
"StrengthNumber": "2.478",
"StrengthUnit": "g/59g",
"Status": "Deprecated",
"LastUpdate": "2024-07-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20220404",
"SamplePackage": "N"
},
{
"NDCCode": "50242-137-01",
"PackageDescription": "1 VIAL, SINGLE-USE in 1 BOX (50242-137-01) / 20 mL in 1 VIAL, SINGLE-USE",
"NDC11Code": "50242-0137-01",
"ProductNDC": "50242-137",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Actemra",
"NonProprietaryName": "Tocilizumab",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20100108",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125276",
"LabelerName": "Genentech, Inc.",
"SubstanceName": "TOCILIZUMAB",
"StrengthNumber": "400",
"StrengthUnit": "mg/20mL",
"Pharm_Classes": "Interleukin 6 Receptor Antagonists [MoA], Interleukin-6 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20100108",
"SamplePackage": "N",
"IndicationAndUsage": "ACTEMRA® (tocilizumab) is an interleukin-6 (IL-6) receptor antagonist indicated for treatment of. Rheumatoid Arthritis (RA) (1.1): 1 Adult patients with moderately to severely active rheumatoid arthritis who have had an inadequate response to one or more Disease-Modifying Anti-Rheumatic Drugs (DMARDs).",
"Description": "Tocilizumab is a recombinant humanized anti-human interleukin 6 (IL-6) receptor monoclonal antibody of the immunoglobulin IgG1κ (gamma 1, kappa) subclass with a typical H2L2 polypeptide structure. Each light chain and heavy chain consists of 214 and 448 amino acids, respectively. The four polypeptide chains are linked intra- and inter-molecularly by disulfide bonds. ACTEMRA has a molecular weight of approximately 148 kDa. The antibody is produced in mammalian (Chinese hamster ovary) cells."
},
{
"NDCCode": "50242-137-04",
"PackageDescription": "4 VIAL, SINGLE-USE in 1 BOX (50242-137-04) > 20 mL in 1 VIAL, SINGLE-USE",
"NDC11Code": "50242-0137-04",
"ProductNDC": "50242-137",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Actemra",
"NonProprietaryName": "Tocilizumab",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20100108",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125276",
"LabelerName": "Genentech, Inc.",
"SubstanceName": "TOCILIZUMAB",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Interleukin 6 Receptor Antagonists [MoA],Interleukin-6 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2017-04-11"
},
{
"NDCCode": "51013-137-15",
"PackageDescription": "1 BOTTLE in 1 CARTON (51013-137-15) > 20 CAPSULE, LIQUID FILLED in 1 BOTTLE",
"NDC11Code": "51013-0137-15",
"ProductNDC": "51013-137",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Naproxen Sodium",
"NonProprietaryName": "Naproxen Sodium",
"DosageFormName": "CAPSULE, LIQUID FILLED",
"RouteName": "ORAL",
"StartMarketingDate": "20180320",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208363",
"LabelerName": "PuraCap Pharmaceutical LLC",
"SubstanceName": "NAPROXEN SODIUM",
"StrengthNumber": "220",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2019-12-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180320",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves minor aches and pains due to:minor pain of arthritismuscular achesbackachemenstrual crampsheadachetoothachethe common cold. temporarily reduces fever."
},
{
"NDCCode": "55289-137-20",
"PackageDescription": "20 TABLET in 1 BOTTLE, PLASTIC (55289-137-20)",
"NDC11Code": "55289-0137-20",
"ProductNDC": "55289-137",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"NonProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100218",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040729",
"LabelerName": "PD-Rx Pharmaceuticals, Inc.",
"SubstanceName": "ACETAMINOPHEN; HYDROCODONE BITARTRATE",
"StrengthNumber": "500; 5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC],Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2014-08-29"
},
{
"NDCCode": "58411-137-20",
"PackageDescription": "1 CARTRIDGE in 1 CARTON (58411-137-20) / 9 g in 1 CARTRIDGE",
"NDC11Code": "58411-0137-20",
"ProductNDC": "58411-137",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Shiseido Uv Protective Foundation",
"ProprietaryNameSuffix": "Fair Ivory",
"NonProprietaryName": "Octinoxate And Titanium Dioxide",
"DosageFormName": "STICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140201",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "SHISEIDO AMERICAS CORPORATION",
"SubstanceName": "OCTINOXATE; TITANIUM DIOXIDE",
"StrengthNumber": "261; 648",
"StrengthUnit": "mg/9g; mg/9g",
"Status": "Active",
"LastUpdate": "2026-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140201",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun ."
},
{
"NDCCode": "58602-137-20",
"PackageDescription": "237 mL in 1 BOTTLE (58602-137-20) ",
"NDC11Code": "58602-0137-20",
"ProductNDC": "58602-137",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Auroquil Cold And Flu Nighttime Relief",
"NonProprietaryName": "Acetaminophen, Doxylamine Succinate, And Dextromethorphan Hbr",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20150209",
"EndMarketingDate": "20211001",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "Aurohealth LLC",
"SubstanceName": "ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE; DOXYLAMINE SUCCINATE",
"StrengthNumber": "650; 30; 12.5",
"StrengthUnit": "mg/30mL; mg/30mL; mg/30mL",
"Status": "Deprecated",
"LastUpdate": "2021-10-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20150209",
"EndMarketingDatePackage": "20211001",
"SamplePackage": "N"
},
{
"NDCCode": "61786-137-03",
"PackageDescription": "20 TABLET, FILM COATED in 1 BOTTLE (61786-137-03)",
"NDC11Code": "61786-0137-03",
"ProductNDC": "61786-137",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin And Clavulanate Potassium",
"NonProprietaryName": "Amoxicillin And Clavulanate Potassium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150109",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065093",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "AMOXICILLIN; CLAVULANATE POTASSIUM",
"StrengthNumber": "875; 125",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC],Penicillins [Chemical/Ingredient],beta Lactamase Inhibitor [EPC],beta Lactamase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-10-11",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "63323-137-20",
"PackageDescription": "1 VIAL in 1 CARTON (63323-137-20) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL",
"NDC11Code": "63323-0137-20",
"ProductNDC": "63323-137",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bleomycin",
"NonProprietaryName": "Bleomycin Sulfate",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAPLEURAL; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20090213",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065185",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "BLEOMYCIN SULFATE",
"StrengthNumber": "30",
"StrengthUnit": "[USP'U]/1",
"Pharm_Classes": "Cytoprotective Agent [EPC]",
"Status": "Active",
"LastUpdate": "2024-10-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20090213",
"SamplePackage": "N",
"IndicationAndUsage": "Bleomycin for Injection, USP should be considered a palliative treatment. It has been shown to be useful in the management of the following neoplasms either as a single agent or in proven combinations with other approved chemotherapeutic agents:. Squamous Cell Carcinoma: Head and neck (including mouth, tongue, tonsil, nasopharynx, oropharynx, sinus, palate, lip, buccal mucosa, gingivae, epiglottis, skin, larynx), penis, cervix, and vulva. The response to Bleomycin for Injection is poorer in patients with previously irradiated head and neck cancer. Lymphomas: Hodgkin’s disease, non-Hodgkin’s lymphoma. Testicular Carcinoma: Embryonal cell, choriocarcinoma, and teratocarcinoma. Bleomycin for Injection, USP has also been shown to be useful in the management of. Malignant Pleural Effusion: Bleomycin for Injection is effective as a sclerosing agent for the treatment of malignant pleural effusion and prevention of recurrent pleural effusions.",
"Description": "Bleomycin for Injection, USP is a mixture of cytotoxic glycopeptide antibiotics isolated from a strain of Streptomyces verticillus. It is freely soluble in water. Bleomycin for Injection, USP is provided as a sterile lyophilized powder for reconstitution containing 15 units per vial and 30 units per vial, which are intended for intramuscular, intravenous, subcutaneous or intrapleural administration. Its chemical name is N’-[3-(dimethylsulphonio)propyl]bleomycin-amide (bleomycin A 2) and N’-[4-(guaniodobutyl)]bleomycin-amide (bleomycin B 2). (Main component: Bleomycin A 2, in which R is [CH 3] 2S +CH 2CH 2CH 2-). Note: A unit of bleomycin is equal to the formerly used milligram activity. The term milligram activity is a misnomer and was changed to units to be more precise."
},
{
"NDCCode": "64220-137-07",
"PackageDescription": "20 kg in 1 DRUM (64220-137-07)",
"NDC11Code": "64220-0137-07",
"ProductNDC": "64220-137",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Prasugrel Base",
"DosageFormName": "POWDER",
"StartMarketingDate": "20110209",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "ZHEJIANG HUAHAI PHARMACEUTICAL CO., LTD.",
"SubstanceName": "PRASUGREL",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2019-02-23",
"ListingRecordCertifiedThrough": "20201231"
},
{
"NDCCode": "65145-137-01",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (65145-137-01) / 20 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "65145-0137-01",
"ProductNDC": "65145-137",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cisatracurium Besylate",
"NonProprietaryName": "Cisatracurium Besylate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250117",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217725",
"LabelerName": "Caplin Steriles Limited",
"SubstanceName": "CISATRACURIUM BESYLATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250117",
"SamplePackage": "N",
"IndicationAndUsage": "Cisatracurium Besylate injection is indicated: as an adjunct to general anesthesia to facilitate tracheal intubation in adults and in pediatric patients 1 month to 12 years of age to provide skeletal muscle relaxation in adults during surgical procedures or during mechanical ventilation in the ICU to provide skeletal muscle relaxation during surgical procedures via infusion in pediatric patients 2 years and older.Limitations of Use Cisatracurium besylate injection is not recommended for rapid sequence endotracheal intubation due to the time required for its onset of action.",
"Description": "Cisatracurium besylate, USP is a nondepolarizing skeletal neuromuscular blocker for intravenous administration. Compared to other neuromuscular blockers, it is intermediate in its onset and duration of action. Cisatracurium Besylate Injection, USP contains cisatracurium besylate as the active pharmaceutical ingredient. Cisatracurium besylate USP is one of 10 isomers of atracurium besylate and constitutes approximately 15% of that mixture. Cisatracurium besylate is [1R- [1α,2α(1'R*,2'R*)]]-2,2'-[1,5-pentanediylbis[oxy(3-oxo-3,1-propanediyl)]]bis[1-[(3,4- dimethoxyphenyl)methyl]-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methylisoquinolinium] dibenzenesulfonate. The molecular formula of the cisatracurium parent bis-cation is C53H72N2O12 and the molecular weight is 929.2. The molecular formula of cisatracurium as the besylate salt is C65H82N2O18S2 and the molecular weight is 1243.50. The structural formula of cisatracurium besylate is:. The log of the partition coefficient of cisatracurium besylate is -2.12 in a 1-octanol/distilled water system at 25°C. Cisatracurium besylate injection USP is a sterile, non-pyrogenic aqueous solution. Each mL in the single-dose vials contains either 2 mg or 10mg of cisatracurium (equivalent to 2.68 mg and 13.38 mg of cisatracurium besylate; respectively), and benzenesulfonic acid as pH adjuster in water for injection. Each mL in the multiple-dose vials contains 2 mg of cisatracurium (equivalent to 2.68 mg of cisatracurium besylate), benzenesulfonic acid as pH adjuster, and also contains 9 mg of benzyl alcohol as preservative, in water for injection. The pH of cisatracurium besylate injection, USP is between 3.0 and 3.8."
},
{
"NDCCode": "66869-137-20",
"PackageDescription": "30 CAPSULE in 1 BOTTLE, PLASTIC (66869-137-20) ",
"NDC11Code": "66869-0137-20",
"ProductNDC": "66869-137",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lipofen",
"NonProprietaryName": "Fenofibrate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20071001",
"EndMarketingDate": "20230531",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021612",
"LabelerName": "Kowa Pharmaceuticals America, Inc.",
"SubstanceName": "FENOFIBRATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Peroxisome Proliferator Receptor alpha Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-06-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20071001",
"EndMarketingDatePackage": "20230531",
"SamplePackage": "N"
},
{
"NDCCode": "67046-137-20",
"PackageDescription": "20 TABLET, DELAYED RELEASE in 1 BLISTER PACK (67046-137-20)",
"NDC11Code": "67046-0137-20",
"ProductNDC": "67046-137",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Divalproex Sodium",
"NonProprietaryName": "Divalproex Sodium",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20170925",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077100",
"LabelerName": "Contract Pharmacy Services-PA",
"SubstanceName": "DIVALPROEX SODIUM",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE],Mood Stabilizer [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Divalproex sodium delayed-release tablets are anti-epileptic drug indicated for: 1 Treatment of manic episodes associated with bipolar disorder ( 1.1) , 2 Monotherapy and adjunctive therapy of complex partial seizures and simple and complex absence seizures; adjunctive therapy in patients with multiple seizure types that include absence seizures ( 1.2) , 3 Prophylaxis of migraine headaches ( 1.3) .",
"Description": "Divalproex sodium is a stable co-ordination compound comprised of sodium valproate and valproic acid in a 1:1 molar relationship. Chemically it is designated as sodium hydrogen bis(2-propylpentanoate). Divalproex sodium has the following structure. Divalproex sodium, USP is a white, crystalline powder and almost odorless. It is very soluble in chloroform, freely soluble in methanol and in ethyl ether; soluble in acetone and practically insoluble in acetonitrile. Each divalproex sodium delayed-release tablets, intended for oral administration contains divalproex sodium equivalent to 125 mg or 250 mg or 500 mg of valproic acid. In addition each tablet also contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, magnesium stearate, methacrylic acid copolymer dispersion, microcrystalline cellulose, polyethylene glycol, povidone, sodium starch glycolate, starch (botanical source: maize), talc and triethyl citrate. Each tablet is imprinted with black pharmaceutical ink which contains following inactive ingredients: ammonium hydroxide, ferrosoferric oxide, isopropyl alcohol, n-butyl alcohol, propylene glycol and shellac."
},
{
"NDCCode": "74004-137-20",
"PackageDescription": "20 POUCH in 1 BOX (74004-137-20) > 30 mL in 1 POUCH",
"NDC11Code": "74004-0137-20",
"ProductNDC": "74004-137",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Oull Fresh Pure Hand Gel",
"NonProprietaryName": "Alcohol",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200416",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "Ester Co., Ltd.",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "21",
"StrengthUnit": "g/30mL",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20200416",
"SamplePackage": "N"
},
{
"NDCCode": "71288-005-20",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (71288-005-20) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (71288-005-21) ",
"NDC11Code": "71288-0005-20",
"ProductNDC": "71288-005",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin And Sulbactam",
"NonProprietaryName": "Ampicillin Sodium And Sulbactam Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20220117",
"EndMarketingDate": "20240731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090579",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "AMPICILLIN SODIUM; SULBACTAM SODIUM",
"StrengthNumber": "1; .5",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20220117",
"EndMarketingDatePackage": "20240731",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin and sulbactam for injection is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli,* Klebsiella spp.* (including K. pneumoniae*), Proteus mirabilis,* Bacteroides fragilis,* Enterobacter spp.,* and Acinetobacter calcoaceticus.*. NOTE: For information on use in pediatric patients (see PRECAUTIONS - Pediatric Use and CLINICAL STUDIES sections). Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae*), Bacteroides spp. (including B. fragilis), and Enterobacter spp.*. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli,* and Bacteroides spp.* (including B. fragilis*). * Efficacy for this organism in this organ system was studied in fewer than 10 infections. While ampicillin and sulbactam for injection is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with ampicillin and sulbactam for injection due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to ampicillin and sulbactam for injection should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to ampicillin and sulbactam for injection. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of ampicillin and sulbactam for injection and other antibacterial drugs, ampicillin and sulbactam for injection should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Ampicillin and Sulbactam for Injection, USP is an injectable antibacterial combination consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S,5R,6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection, USP, ampicillin sodium/sulbactam sodium parenteral combination, is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8.0 and 10.0. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 1.5 gram vial of Ampicillin and Sulbactam for Injection, USP contains 1 gram ampicillin as the sodium salt plus 0.5 gram sulbactam as the sodium salt. The sodium content is approximately 115 mg (5 mEq) of sodium per vial. Each 3 gram vial of Ampicillin and Sulbactam for Injection, USP contains 2 grams ampicillin as the sodium salt plus 1 gram sulbactam as the sodium salt. The sodium content is approximately 230 mg (10 mEq) of sodium per vial."
},
{
"NDCCode": "71288-009-20",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (71288-009-20) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (71288-009-21) ",
"NDC11Code": "71288-0009-20",
"ProductNDC": "71288-009",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefepime",
"NonProprietaryName": "Cefepime Hydrochloride",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20181217",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091048",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "CEFEPIME HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-12-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20181217",
"EndMarketingDatePackage": "20231130",
"SamplePackage": "N",
"IndicationAndUsage": "Cefepime for Injection is a cephalosporin antibacterial indicated for the treatment of the following infections caused by susceptible strains of the designated microorganisms: : 1 Pneumonia. (1.1) , 2 Empiric therapy for febrile neutropenic patients. (1.2) , 3 Uncomplicated and complicated urinary tract infections (including pyelonephritis). (1.3) , 4 Uncomplicated skin and skin structure infections. (1.4) , 5 Complicated intra-abdominal infections (used in combination with metronidazole) in adults. (1.5) .",
"Description": "Cefepime for Injection, USP is a semi-synthetic, cephalosporin antibacterial for parenteral administration. The chemical name is 1-[[(6R,7R)-7-[2-(2-amino-4-thiazolyl)-glyoxylamido]-2-carboxy-8-oxo-5-thia-1-azabyciclo[4.2.0] oct-2-en-3-yl]methyl]-1-methylpyrrolidinum chloride,72-(Z)-O-methyloxime), monohydrochloride, monohydrate, which corresponds to the following structural formula. Cefepime hydrochloride is a white to pale yellow powder. Cefepime hydrochloride contains the equivalent of not less than 825 mcg and not more than 911 mcg of cefepime (C19H24N6O5S2) per mg, calculated on an anhydrous basis. It is highly soluble in water. Cefepime for Injection, USP is supplied for intramuscular or intravenous administration in strengths equivalent to 1 gram and 2 grams of cefepime. Cefepime for Injection, USP is a sterile, dry mixture of cefepime hydrochloride and L-arginine. The L-arginine, at an approximate concentration of 707 mg/g of cefepime, is added to control the pH of the constituted solution at 4 to 6. Freshly constituted solutions of Cefepime for Injection, USP will range in color from pale yellow to amber."
},
{
"NDCCode": "71288-014-21",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (71288-014-21) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (71288-014-20) ",
"NDC11Code": "71288-0014-21",
"ProductNDC": "71288-014",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Meropenem",
"NonProprietaryName": "Meropenem",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20191104",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204858",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "MEROPENEM",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Carbapenems [CS],Penem Antibacterial [EPC]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20191104",
"SamplePackage": "N"
},
{
"NDCCode": "71288-021-21",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (71288-021-21) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (71288-021-20) ",
"NDC11Code": "71288-0021-21",
"ProductNDC": "71288-021",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefepime",
"NonProprietaryName": "Cefepime Hydrochloride",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200721",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212721",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "CEFEPIME HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20200721",
"SamplePackage": "N",
"IndicationAndUsage": "Cefepime for injection is a cephalosporin antibacterial indicated for the treatment of the following infections caused by susceptible strains of the designated microorganisms: : 1 Pneumonia. (1.1) , 2 Empiric therapy for febrile neutropenic patients. (1.2) , 3 Uncomplicated and complicated urinary tract infections (including pyelonephritis). (1.3) , 4 Uncomplicated skin and skin structure infections. (1.4) , 5 Complicated intra-abdominal infections (used in combination with metronidazole) in adults. (1.5) .",
"Description": "Cefepime for Injection, USP is a semi-synthetic, cephalosporin antibacterial for parenteral administration. The chemical name is 1-[[(6R,7R)-7-[2-(2-amino-4-thiazolyl)-glyoxylamido]-2-carboxy-8-oxo-5-thia-1-azabyciclo[4.2.0] oct-2-en-3-yl]methyl]-1-methylpyrrolidinum chloride,72-(Z)-O-methyloxime), monohydrochloride, monohydrate, which corresponds to the following structural formula:. Cefepime hydrochloride is a white to pale yellow powder. Cefepime hydrochloride contains the equivalent of not less than 825 mcg and not more than 911 mcg of cefepime (C19H24N6O5S2) per mg, calculated on an anhydrous basis. It is highly soluble in water. Cefepime for Injection, USP is supplied for intramuscular or intravenous administration in strengths equivalent to 1 gram and 2 grams of cefepime. Cefepime for Injection, USP is a sterile, dry mixture of cefepime hydrochloride and L-arginine. The L-arginine, at an approximate concentration of 707 mg/g of cefepime, is added to control the pH of the constituted solution at 4 to 6. Freshly constituted solutions of Cefepime for Injection, USP will range in color from pale yellow to amber."
},
{
"NDCCode": "71288-023-21",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (71288-023-21) / 20 mL in 1 VIAL, SINGLE-DOSE (71288-023-20) ",
"NDC11Code": "71288-0023-21",
"ProductNDC": "71288-023",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220728",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215197",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/20mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-07-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220728",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin hydrochloride-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), Vancomycin Hydrochloride for Injection has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin hydrochloride. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection and other antibacterial drugs, Vancomycin Hydrochloride for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin hydrochloride is not effective by the oral route for other types of infections.",
"Description": "Vancomycin Hydrochloride for Injection, USP, is a white or off-white to light tan-colored lyophilized powder or cake, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg or 1 gram vancomycin base. 500 mg of the base is equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg per mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is [3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. Vancomycin hydrochloride has the following structural formula. C66H75Cl2N9O24HCl M.W. 1485.71."
},
{
"NDCCode": "71288-024-21",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (71288-024-21) / 15 mL in 1 VIAL, SINGLE-DOSE (71288-024-20) ",
"NDC11Code": "71288-0024-21",
"ProductNDC": "71288-024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220915",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215195",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "750",
"StrengthUnit": "mg/15mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2023-03-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220915",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection is a glycopeptide antibacterial indicated in adult and pediatric patients (neonates and older) for the treatment of: : 1 Septicemia (1.1) , 2 Infective Endocarditis (1.2) , 3 Skin and Skin Structure Infections (1.3) , 4 Bone Infections (1.4) , 5 Lower Respiratory Tract Infections (1.5) .",
"Description": "Vancomycin Hydrochloride for Injection, USP, contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride, USP is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride, USP has the following structural formula. Vancomycin Hydrochloride for Injection, USP is a sterile white or off white to light tan colored lyophilized powder or cake for injection. Vancomycin Hydrochloride for Injection, USP is supplied in single-dose vials, containing 769 mg of vancomycin hydrochloride, USP equivalent to 750 mg of vancomycin base. The lyophilized powder is reconstituted with Sterile Water for Injection, USP which forms a clear, colorless to light yellow or tan solution and subsequently diluted prior to intravenous administration [see Dosage and Administration (2.5)]."
},
{
"NDCCode": "71288-027-30",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (71288-027-30) / 20 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "71288-0027-30",
"ProductNDC": "71288-027",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Voriconazole",
"NonProprietaryName": "Voriconazole",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220509",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214516",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "VORICONAZOLE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220509",
"SamplePackage": "N",
"IndicationAndUsage": "Voriconazole for Injection is an azole antifungal indicated for the treatment of adults and pediatric patients 2 years of age and older with: : 1 Invasive aspergillosis (1.1) , 2 Candidemia in non-neutropenics and other deep tissue Candida infections (1.2) , 3 Esophageal candidiasis (1.3) , 4 Serious fungal infections caused by Scedosporium apiospermum and Fusarium species including Fusarium solani, in patients intolerant of, or refractory to, other therapy (1.4) .",
"Description": "Voriconazole, an azole antifungal agent is available as a lyophilized powder for solution for intravenous infusion. The structural formula is. Voriconazole is designated chemically as (2R,3S)-2-(2, 4-difluorophenyl)-3-(5-fluoro-4-pyrimidinyl)-1-(1H-1,2,4-triazol-1-yl)-2-butanol with an empirical formula of C16H14F3N5O and a molecular weight of 349.31. Voriconazole drug substance is a white to light-colored powder. Voriconazole for Injection is a white to off-white lyophilized powder or cake containing nominally 200 mg voriconazole and 3,200 mg sulfobutyl ether beta-cyclodextrin sodium in a 30 mL Type I clear glass vial. Voriconazole for Injection is intended for administration by intravenous infusion. It is a single-dose, unpreserved product. Vials containing 200 mg lyophilized voriconazole are intended for reconstitution with Water for Injection to produce a solution containing 10 mg per mL voriconazole and 160 mg per mL of sulfobutyl ether beta-cyclodextrin sodium. The resultant solution is further diluted prior to administration as an intravenous infusion [see Dosage and Administration (2)]."
},
{
"NDCCode": "71288-030-21",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (71288-030-21) / 10 mL in 1 VIAL, SINGLE-DOSE (71288-030-20) ",
"NDC11Code": "71288-0030-21",
"ProductNDC": "71288-030",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline",
"NonProprietaryName": "Doxycycline",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20241028",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218053",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "DOXYCYCLINE HYCLATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241028",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of Doxycycline for Injection and other antibacterial drugs, Doxycycline for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline for Injection is indicated in infections caused by the following microorganisms: 1 Rickettsiae (Rocky Mountain spotted fever, typhus fever, and the typhus group, Q fever, rickettsial pox and tick fevers)., 2 Mycoplasma pneumoniae (PPLO, Eaton Agent)., 3 Agents of psittacosis and ornithosis., 4 Agents of lymphogranuloma venereum and granuloma inguinale., 5 The spirochetal agent of relapsing fever (Borrelia recurrentis).",
"Description": "Doxycycline for Injection, USP is a sterile, lyophilized powder prepared from a solution of doxycycline hyclate, ascorbic acid and mannitol in Water for Injection. Doxycycline hyclate is a broad spectrum antibiotic derived from oxytetracycline. It is meant for INTRAVENOUS use only after reconstitution. Doxycycline hyclate is a yellow to light yellow crystalline powder which is chemically designated 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-de monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. It has the following structural formula. (C22H24N2O8 HCl)2 C2H6O H2O M.W. 1025.88. Doxycycline hyclate is soluble in water and chars at 201°C without melting. The base doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Each 100 mg vial contains: Doxycycline hyclate equivalent to 100 mg doxycycline; ascorbic acid 480 mg; mannitol 300 mg. pH of the reconstituted solution (10 mg per mL) is between 1.8 and 3.3."
},
{
"NDCCode": "71288-031-21",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (71288-031-21) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (71288-031-20) ",
"NDC11Code": "71288-0031-21",
"ProductNDC": "71288-031",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin And Sulbactam",
"NonProprietaryName": "Ampicillin Sodium And Sulbactam Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20051129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065406",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "AMPICILLIN SODIUM; SULBACTAM SODIUM",
"StrengthNumber": "1; .5",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20051129",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin and Sulbactam for Injection is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli*, Klebsiella spp.* (including K. pneumoniae*), Proteus mirabilis*, Bacteroides fragilis*, Enterobacter spp.*, and Acinetobacter calcoaceticus*. NOTE: For information on use in pediatric patients see PRECAUTIONS-Pediatric Use and CLINICAL STUDIES sections. Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae*), Bacteroides spp. (including B. fragilis), and Enterobacter spp.*. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli*, and Bacteroides spp.* (including B. fragilis*). *Efficacy for this organism in this organ system was studied in fewer than 10 infections. While ampicillin and sulbactam for injection is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with ampicillin and sulbactam for injection due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to ampicillin and sulbactam for injection should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to ampicillin and sulbactam for injection. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of ampicillin and sulbactam for injection and other antibacterial drugs, ampicillin and sulbactam for injection should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Ampicillin and Sulbactam for Injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0] heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection, USP is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8 and 10. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 1.5 g vial contains ampicillin 1 g and sulbactam 0.5 g (equivalent to 1.063 g ampicillin sodium and 0.547 g sulbactam sodium). Each 1.5 g vial contains approximately 115 mg of sodium. Each 3 g vial contains ampicillin 2 g and sulbactam 1 g (equivalent to 2.126 g ampicillin sodium and 1.094 g sulbactam sodium). Each 3 g vial contains approximately 230 mg of sodium."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>71288-137-20</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (71288-137-20) > 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>71288-0137-20</NDC11Code>
<ProductNDC>71288-137</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mitomycin</ProprietaryName>
<NonProprietaryName>Mitomycin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220908</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214505</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>MITOMYCIN</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA], Alkylating Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-09-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220908</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mitomycin for Injection is not recommended as single-agent, primary therapy. It has been shown to be useful in the therapy of disseminated adenocarcinoma of the stomach or pancreas in proven combinations with other approved chemotherapeutic agents and as palliative treatment when other modalities have failed. Mitomycin for Injection is not recommended to replace appropriate surgery and/or radiotherapy.</IndicationAndUsage>
<Description>Mitomycin (also known as mitomycin and/or mitomycin-C) is an antibiotic isolated from the broth of Streptomyces caespitosus which has been shown to have antitumor activity. The compound is heat stable, has a high melting point, and is freely soluble in organic solvents. Mitomycin for Injection, USP is a sterile dry mixture of mitomycin and mannitol, which when reconstituted with Sterile Water for Injection provides a solution for intravenous administration. Each single-dose vial contains either mitomycin 5 mg and mannitol 10 mg or mitomycin 20 mg and mannitol 40 mg. Each mL of reconstituted solution will contain 0.5 mg mitomycin and have a pH between 6.0 and 8.0. Mitomycin is a blue-violet crystalline powder with the molecular formula of C15H18N4O5, and a molecular weight of 334.33. Its chemical name is 7-amino-9α-methoxymitosane and it has the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>12784-137-20</NDCCode>
<PackageDescription>205 kg in 1 CONTAINER (12784-137-20) </PackageDescription>
<NDC11Code>12784-0137-20</NDC11Code>
<ProductNDC>12784-137</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Aluminum Hydroxide</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<StartMarketingDate>20140724</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>SPI Pharma, Inc.</LabelerName>
<SubstanceName>ALUMINUM HYDROXIDE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>kg/100kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>24-JUL-14</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>13668-137-20</NDCCode>
<PackageDescription>2000 TABLET, FILM COATED in 1 BOTTLE (13668-137-20) </PackageDescription>
<NDC11Code>13668-0137-20</NDC11Code>
<ProductNDC>13668-137</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Escitalopram</ProprietaryName>
<NonProprietaryName>Escitalopram</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120911</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090939</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>ESCITALOPRAM OXALATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120911</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Escitalopram is a selective serotonin reuptake inhibitor (SSRI) indicated for the: treatment of major depressive disorder (MDD) in adults and pediatric patients 12 years of age and older (1) treatment of generalized anxiety disorder (GAD) in adults (1).</IndicationAndUsage>
<Description>Escitalopram tablets contain escitalopram, a selective serotonin reuptake inhibitor (SSRI), present as escitalopram oxalate salt. Escitalopram is the pure S- enantiomer (single isomer) of the racemic bicyclic phthalane derivative citalopram. Escitalopram oxalate is designated S-(+)-1- [3-(dimethyl-amino)propyl]-1-(p-fluorophenyl)-5-phthalancarbonitrile oxalate with the following structural formula. The molecular formula is C20H 21FN2O C2H2O4 and the molecular weight is 414.40. Escitalopram oxalate, USP occurs as a fine, white to slightly-yellow powder and is freely soluble in methanol and dimethyl sulfoxide (DMSO), soluble in isotonic saline solution, sparingly soluble in water and ethanol, slightly soluble in ethyl acetate, and insoluble in heptane. Escitalopram tablets, USP are white to off-white, round, biconvex, film-coated tablets containing 6.38 mg, 12.75 mg and 25.55 mg escitalopram oxalate in strengths equivalent to 5 mg, 10 mg, and 20 mg, respectively, of escitalopram base. The 10 and 20 mg tablets are scored. The tablets also contain the following inactive ingredients: cellulose microcrystalline, colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, povidone and talc. The film coating contains hypromellose, polyethylene glycol 400 and titanium dioxide. Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>14789-137-05</NDCCode>
<PackageDescription>25 VIAL, GLASS in 1 CARTON (14789-137-05) / 20 mL in 1 VIAL, GLASS (14789-137-07) </PackageDescription>
<NDC11Code>14789-0137-05</NDC11Code>
<ProductNDC>14789-137</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride</ProprietaryName>
<NonProprietaryName>Potassium Chloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230912</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217704</ApplicationNumber>
<LabelerName>Nexus Pharmaceuticals LLC</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>149</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230912</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium Chloride for Injection Concentrate, USP is indicated in the treatment of potassium deficiency states when oral replacement is not feasible.</IndicationAndUsage>
<Description>Potassium Chloride for Injection Concentrate, USP, is a sterile, nonpyrogenic, concentrated solution of potassium chloride, USP in water for injection administered by intravenous infusion only after dilution in a larger volume of fluid. They are provided in the following variety of concentrations and sizes comprising a choice of single-dose containers, all designed to provide the commonly prescribed amounts of potassium chloride for single-dose infusion after dilution in suitable large volume parenterals. The solutions contain no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and each is intended only for single-dose injection (after dilution). When smaller doses are required, discard the unused portion. The pH is 4.6 (4.0 to 8.0). Potassium Chloride for Injection Concentrate, USP (appropriately diluted) is a parenteral fluid and electrolyte replenisher. Potassium Chloride, USP is chemically designated KCl, a white granular powder freely soluble in water.</Description>
</NDC>
<NDC>
<NDCCode>25021-137-20</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (25021-137-20) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>25021-0137-20</NDC11Code>
<ProductNDC>25021-137</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin</ProprietaryName>
<NonProprietaryName>Ampicillin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20140701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090354</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>AMPICILLIN SODIUM</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:. Respiratory Tract Infections caused by Streptococcus pneumoniae, Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic Streptococci. Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.</IndicationAndUsage>
<Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2α, 5α, 6β(S*)]]-6- [(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure:. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.</Description>
</NDC>
<NDC>
<NDCCode>36800-137-20</NDCCode>
<PackageDescription>20 BLISTER PACK in 1 CARTON (36800-137-20) / 1 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>36800-0137-20</NDC11Code>
<ProductNDC>36800-137</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Mucus Relief</ProprietaryName>
<NonProprietaryName>Guaifenesin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190331</StartMarketingDate>
<EndMarketingDate>20260728</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207342</ApplicationNumber>
<LabelerName>TOP CARE (Topco Associates LLC)</LabelerName>
<SubstanceName>GUAIFENESIN</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Respiratory Secretion Viscosity [PE], Expectorant [EPC], Increased Respiratory Secretions [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-07-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20190331</StartMarketingDatePackage>
<EndMarketingDatePackage>20260728</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Helps loosen phlegm (mucus) and thin bronchial secretions to rid the bronchial passageways of bothersome mucus and makes coughs more productive.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>42023-137-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (42023-137-10) > 20 mL in 1 VIAL</PackageDescription>
<NDC11Code>42023-0137-10</NDC11Code>
<ProductNDC>42023-137</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketamine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ketamine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20120601</StartMarketingDate>
<EndMarketingDate>20180506</EndMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA016812</ApplicationNumber>
<LabelerName>Par Pharmaceutical Inc.</LabelerName>
<SubstanceName>KETAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>General Anesthesia [PE],General Anesthetic [EPC]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-05-10</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
</NDC>
<NDC>
<NDCCode>45634-137-20</NDCCode>
<PackageDescription>82 g in 1 BOTTLE, GLASS (45634-137-20) </PackageDescription>
<NDC11Code>45634-0137-20</NDC11Code>
<ProductNDC>45634-137</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>High Potency Classics Face Finishing And Firming Tinted Moisturizer Spf 30</ProprietaryName>
<NonProprietaryName>Titanium Dioxide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20220404</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>N.V Perricone LLC</LabelerName>
<SubstanceName>TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>2.478</StrengthNumber>
<StrengthUnit>g/59g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-07-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220404</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>50242-137-01</NDCCode>
<PackageDescription>1 VIAL, SINGLE-USE in 1 BOX (50242-137-01) / 20 mL in 1 VIAL, SINGLE-USE</PackageDescription>
<NDC11Code>50242-0137-01</NDC11Code>
<ProductNDC>50242-137</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Actemra</ProprietaryName>
<NonProprietaryName>Tocilizumab</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20100108</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125276</ApplicationNumber>
<LabelerName>Genentech, Inc.</LabelerName>
<SubstanceName>TOCILIZUMAB</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/20mL</StrengthUnit>
<Pharm_Classes>Interleukin 6 Receptor Antagonists [MoA], Interleukin-6 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100108</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ACTEMRA® (tocilizumab) is an interleukin-6 (IL-6) receptor antagonist indicated for treatment of. Rheumatoid Arthritis (RA) (1.1): 1 Adult patients with moderately to severely active rheumatoid arthritis who have had an inadequate response to one or more Disease-Modifying Anti-Rheumatic Drugs (DMARDs).</IndicationAndUsage>
<Description>Tocilizumab is a recombinant humanized anti-human interleukin 6 (IL-6) receptor monoclonal antibody of the immunoglobulin IgG1κ (gamma 1, kappa) subclass with a typical H2L2 polypeptide structure. Each light chain and heavy chain consists of 214 and 448 amino acids, respectively. The four polypeptide chains are linked intra- and inter-molecularly by disulfide bonds. ACTEMRA has a molecular weight of approximately 148 kDa. The antibody is produced in mammalian (Chinese hamster ovary) cells.</Description>
</NDC>
<NDC>
<NDCCode>50242-137-04</NDCCode>
<PackageDescription>4 VIAL, SINGLE-USE in 1 BOX (50242-137-04) > 20 mL in 1 VIAL, SINGLE-USE</PackageDescription>
<NDC11Code>50242-0137-04</NDC11Code>
<ProductNDC>50242-137</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Actemra</ProprietaryName>
<NonProprietaryName>Tocilizumab</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20100108</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125276</ApplicationNumber>
<LabelerName>Genentech, Inc.</LabelerName>
<SubstanceName>TOCILIZUMAB</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Interleukin 6 Receptor Antagonists [MoA],Interleukin-6 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-04-11</LastUpdate>
</NDC>
<NDC>
<NDCCode>51013-137-15</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (51013-137-15) > 20 CAPSULE, LIQUID FILLED in 1 BOTTLE</PackageDescription>
<NDC11Code>51013-0137-15</NDC11Code>
<ProductNDC>51013-137</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Naproxen Sodium</ProprietaryName>
<NonProprietaryName>Naproxen Sodium</NonProprietaryName>
<DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180320</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208363</ApplicationNumber>
<LabelerName>PuraCap Pharmaceutical LLC</LabelerName>
<SubstanceName>NAPROXEN SODIUM</SubstanceName>
<StrengthNumber>220</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2019-12-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves minor aches and pains due to:minor pain of arthritismuscular achesbackachemenstrual crampsheadachetoothachethe common cold. temporarily reduces fever.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>55289-137-20</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE, PLASTIC (55289-137-20)</PackageDescription>
<NDC11Code>55289-0137-20</NDC11Code>
<ProductNDC>55289-137</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocodone Bitartrate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Hydrocodone Bitartrate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100218</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040729</ApplicationNumber>
<LabelerName>PD-Rx Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ACETAMINOPHEN; HYDROCODONE BITARTRATE</SubstanceName>
<StrengthNumber>500; 5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC],Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2014-08-29</LastUpdate>
</NDC>
<NDC>
<NDCCode>58411-137-20</NDCCode>
<PackageDescription>1 CARTRIDGE in 1 CARTON (58411-137-20) / 9 g in 1 CARTRIDGE</PackageDescription>
<NDC11Code>58411-0137-20</NDC11Code>
<ProductNDC>58411-137</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Shiseido Uv Protective Foundation</ProprietaryName>
<ProprietaryNameSuffix>Fair Ivory</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate And Titanium Dioxide</NonProprietaryName>
<DosageFormName>STICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140201</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>SHISEIDO AMERICAS CORPORATION</LabelerName>
<SubstanceName>OCTINOXATE; TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>261; 648</StrengthNumber>
<StrengthUnit>mg/9g; mg/9g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>58602-137-20</NDCCode>
<PackageDescription>237 mL in 1 BOTTLE (58602-137-20) </PackageDescription>
<NDC11Code>58602-0137-20</NDC11Code>
<ProductNDC>58602-137</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Auroquil Cold And Flu Nighttime Relief</ProprietaryName>
<NonProprietaryName>Acetaminophen, Doxylamine Succinate, And Dextromethorphan Hbr</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150209</StartMarketingDate>
<EndMarketingDate>20211001</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>Aurohealth LLC</LabelerName>
<SubstanceName>ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE; DOXYLAMINE SUCCINATE</SubstanceName>
<StrengthNumber>650; 30; 12.5</StrengthNumber>
<StrengthUnit>mg/30mL; mg/30mL; mg/30mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-10-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20150209</StartMarketingDatePackage>
<EndMarketingDatePackage>20211001</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>61786-137-03</NDCCode>
<PackageDescription>20 TABLET, FILM COATED in 1 BOTTLE (61786-137-03)</PackageDescription>
<NDC11Code>61786-0137-03</NDC11Code>
<ProductNDC>61786-137</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin And Clavulanate Potassium</ProprietaryName>
<NonProprietaryName>Amoxicillin And Clavulanate Potassium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150109</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065093</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>AMOXICILLIN; CLAVULANATE POTASSIUM</SubstanceName>
<StrengthNumber>875; 125</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC],Penicillins [Chemical/Ingredient],beta Lactamase Inhibitor [EPC],beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-10-11</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>63323-137-20</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (63323-137-20) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>63323-0137-20</NDC11Code>
<ProductNDC>63323-137</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bleomycin</ProprietaryName>
<NonProprietaryName>Bleomycin Sulfate</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAPLEURAL; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20090213</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065185</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>BLEOMYCIN SULFATE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[USP'U]/1</StrengthUnit>
<Pharm_Classes>Cytoprotective Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090213</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bleomycin for Injection, USP should be considered a palliative treatment. It has been shown to be useful in the management of the following neoplasms either as a single agent or in proven combinations with other approved chemotherapeutic agents:. Squamous Cell Carcinoma: Head and neck (including mouth, tongue, tonsil, nasopharynx, oropharynx, sinus, palate, lip, buccal mucosa, gingivae, epiglottis, skin, larynx), penis, cervix, and vulva. The response to Bleomycin for Injection is poorer in patients with previously irradiated head and neck cancer. Lymphomas: Hodgkin’s disease, non-Hodgkin’s lymphoma. Testicular Carcinoma: Embryonal cell, choriocarcinoma, and teratocarcinoma. Bleomycin for Injection, USP has also been shown to be useful in the management of. Malignant Pleural Effusion: Bleomycin for Injection is effective as a sclerosing agent for the treatment of malignant pleural effusion and prevention of recurrent pleural effusions.</IndicationAndUsage>
<Description>Bleomycin for Injection, USP is a mixture of cytotoxic glycopeptide antibiotics isolated from a strain of Streptomyces verticillus. It is freely soluble in water. Bleomycin for Injection, USP is provided as a sterile lyophilized powder for reconstitution containing 15 units per vial and 30 units per vial, which are intended for intramuscular, intravenous, subcutaneous or intrapleural administration. Its chemical name is N’-[3-(dimethylsulphonio)propyl]bleomycin-amide (bleomycin A 2) and N’-[4-(guaniodobutyl)]bleomycin-amide (bleomycin B 2). (Main component: Bleomycin A 2, in which R is [CH 3] 2S +CH 2CH 2CH 2-). Note: A unit of bleomycin is equal to the formerly used milligram activity. The term milligram activity is a misnomer and was changed to units to be more precise.</Description>
</NDC>
<NDC>
<NDCCode>64220-137-07</NDCCode>
<PackageDescription>20 kg in 1 DRUM (64220-137-07)</PackageDescription>
<NDC11Code>64220-0137-07</NDC11Code>
<ProductNDC>64220-137</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Prasugrel Base</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20110209</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>ZHEJIANG HUAHAI PHARMACEUTICAL CO., LTD.</LabelerName>
<SubstanceName>PRASUGREL</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2019-02-23</LastUpdate>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>65145-137-01</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (65145-137-01) / 20 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>65145-0137-01</NDC11Code>
<ProductNDC>65145-137</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cisatracurium Besylate</ProprietaryName>
<NonProprietaryName>Cisatracurium Besylate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250117</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217725</ApplicationNumber>
<LabelerName>Caplin Steriles Limited</LabelerName>
<SubstanceName>CISATRACURIUM BESYLATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250117</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cisatracurium Besylate injection is indicated: as an adjunct to general anesthesia to facilitate tracheal intubation in adults and in pediatric patients 1 month to 12 years of age to provide skeletal muscle relaxation in adults during surgical procedures or during mechanical ventilation in the ICU to provide skeletal muscle relaxation during surgical procedures via infusion in pediatric patients 2 years and older.Limitations of Use Cisatracurium besylate injection is not recommended for rapid sequence endotracheal intubation due to the time required for its onset of action.</IndicationAndUsage>
<Description>Cisatracurium besylate, USP is a nondepolarizing skeletal neuromuscular blocker for intravenous administration. Compared to other neuromuscular blockers, it is intermediate in its onset and duration of action. Cisatracurium Besylate Injection, USP contains cisatracurium besylate as the active pharmaceutical ingredient. Cisatracurium besylate USP is one of 10 isomers of atracurium besylate and constitutes approximately 15% of that mixture. Cisatracurium besylate is [1R- [1α,2α(1'R*,2'R*)]]-2,2'-[1,5-pentanediylbis[oxy(3-oxo-3,1-propanediyl)]]bis[1-[(3,4- dimethoxyphenyl)methyl]-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methylisoquinolinium] dibenzenesulfonate. The molecular formula of the cisatracurium parent bis-cation is C53H72N2O12 and the molecular weight is 929.2. The molecular formula of cisatracurium as the besylate salt is C65H82N2O18S2 and the molecular weight is 1243.50. The structural formula of cisatracurium besylate is:. The log of the partition coefficient of cisatracurium besylate is -2.12 in a 1-octanol/distilled water system at 25°C. Cisatracurium besylate injection USP is a sterile, non-pyrogenic aqueous solution. Each mL in the single-dose vials contains either 2 mg or 10mg of cisatracurium (equivalent to 2.68 mg and 13.38 mg of cisatracurium besylate; respectively), and benzenesulfonic acid as pH adjuster in water for injection. Each mL in the multiple-dose vials contains 2 mg of cisatracurium (equivalent to 2.68 mg of cisatracurium besylate), benzenesulfonic acid as pH adjuster, and also contains 9 mg of benzyl alcohol as preservative, in water for injection. The pH of cisatracurium besylate injection, USP is between 3.0 and 3.8.</Description>
</NDC>
<NDC>
<NDCCode>66869-137-20</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE, PLASTIC (66869-137-20) </PackageDescription>
<NDC11Code>66869-0137-20</NDC11Code>
<ProductNDC>66869-137</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lipofen</ProprietaryName>
<NonProprietaryName>Fenofibrate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20071001</StartMarketingDate>
<EndMarketingDate>20230531</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021612</ApplicationNumber>
<LabelerName>Kowa Pharmaceuticals America, Inc.</LabelerName>
<SubstanceName>FENOFIBRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Peroxisome Proliferator Receptor alpha Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-06-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20071001</StartMarketingDatePackage>
<EndMarketingDatePackage>20230531</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>67046-137-20</NDCCode>
<PackageDescription>20 TABLET, DELAYED RELEASE in 1 BLISTER PACK (67046-137-20)</PackageDescription>
<NDC11Code>67046-0137-20</NDC11Code>
<ProductNDC>67046-137</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Divalproex Sodium</ProprietaryName>
<NonProprietaryName>Divalproex Sodium</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170925</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077100</ApplicationNumber>
<LabelerName>Contract Pharmacy Services-PA</LabelerName>
<SubstanceName>DIVALPROEX SODIUM</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE],Mood Stabilizer [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Divalproex sodium delayed-release tablets are anti-epileptic drug indicated for: 1 Treatment of manic episodes associated with bipolar disorder ( 1.1) , 2 Monotherapy and adjunctive therapy of complex partial seizures and simple and complex absence seizures; adjunctive therapy in patients with multiple seizure types that include absence seizures ( 1.2) , 3 Prophylaxis of migraine headaches ( 1.3) .</IndicationAndUsage>
<Description>Divalproex sodium is a stable co-ordination compound comprised of sodium valproate and valproic acid in a 1:1 molar relationship. Chemically it is designated as sodium hydrogen bis(2-propylpentanoate). Divalproex sodium has the following structure. Divalproex sodium, USP is a white, crystalline powder and almost odorless. It is very soluble in chloroform, freely soluble in methanol and in ethyl ether; soluble in acetone and practically insoluble in acetonitrile. Each divalproex sodium delayed-release tablets, intended for oral administration contains divalproex sodium equivalent to 125 mg or 250 mg or 500 mg of valproic acid. In addition each tablet also contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, magnesium stearate, methacrylic acid copolymer dispersion, microcrystalline cellulose, polyethylene glycol, povidone, sodium starch glycolate, starch (botanical source: maize), talc and triethyl citrate. Each tablet is imprinted with black pharmaceutical ink which contains following inactive ingredients: ammonium hydroxide, ferrosoferric oxide, isopropyl alcohol, n-butyl alcohol, propylene glycol and shellac.</Description>
</NDC>
<NDC>
<NDCCode>74004-137-20</NDCCode>
<PackageDescription>20 POUCH in 1 BOX (74004-137-20) > 30 mL in 1 POUCH</PackageDescription>
<NDC11Code>74004-0137-20</NDC11Code>
<ProductNDC>74004-137</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Oull Fresh Pure Hand Gel</ProprietaryName>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200416</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>Ester Co., Ltd.</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>21</StrengthNumber>
<StrengthUnit>g/30mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200416</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71288-005-20</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (71288-005-20) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (71288-005-21) </PackageDescription>
<NDC11Code>71288-0005-20</NDC11Code>
<ProductNDC>71288-005</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin And Sulbactam</ProprietaryName>
<NonProprietaryName>Ampicillin Sodium And Sulbactam Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20220117</StartMarketingDate>
<EndMarketingDate>20240731</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090579</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>AMPICILLIN SODIUM; SULBACTAM SODIUM</SubstanceName>
<StrengthNumber>1; .5</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20220117</StartMarketingDatePackage>
<EndMarketingDatePackage>20240731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin and sulbactam for injection is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli,* Klebsiella spp.* (including K. pneumoniae*), Proteus mirabilis,* Bacteroides fragilis,* Enterobacter spp.,* and Acinetobacter calcoaceticus.*. NOTE: For information on use in pediatric patients (see PRECAUTIONS - Pediatric Use and CLINICAL STUDIES sections). Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae*), Bacteroides spp. (including B. fragilis), and Enterobacter spp.*. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli,* and Bacteroides spp.* (including B. fragilis*). * Efficacy for this organism in this organ system was studied in fewer than 10 infections. While ampicillin and sulbactam for injection is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with ampicillin and sulbactam for injection due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to ampicillin and sulbactam for injection should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to ampicillin and sulbactam for injection. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of ampicillin and sulbactam for injection and other antibacterial drugs, ampicillin and sulbactam for injection should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Ampicillin and Sulbactam for Injection, USP is an injectable antibacterial combination consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S,5R,6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection, USP, ampicillin sodium/sulbactam sodium parenteral combination, is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8.0 and 10.0. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 1.5 gram vial of Ampicillin and Sulbactam for Injection, USP contains 1 gram ampicillin as the sodium salt plus 0.5 gram sulbactam as the sodium salt. The sodium content is approximately 115 mg (5 mEq) of sodium per vial. Each 3 gram vial of Ampicillin and Sulbactam for Injection, USP contains 2 grams ampicillin as the sodium salt plus 1 gram sulbactam as the sodium salt. The sodium content is approximately 230 mg (10 mEq) of sodium per vial.</Description>
</NDC>
<NDC>
<NDCCode>71288-009-20</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (71288-009-20) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (71288-009-21) </PackageDescription>
<NDC11Code>71288-0009-20</NDC11Code>
<ProductNDC>71288-009</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefepime</ProprietaryName>
<NonProprietaryName>Cefepime Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20181217</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091048</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>CEFEPIME HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-12-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181217</StartMarketingDatePackage>
<EndMarketingDatePackage>20231130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cefepime for Injection is a cephalosporin antibacterial indicated for the treatment of the following infections caused by susceptible strains of the designated microorganisms: : 1 Pneumonia. (1.1) , 2 Empiric therapy for febrile neutropenic patients. (1.2) , 3 Uncomplicated and complicated urinary tract infections (including pyelonephritis). (1.3) , 4 Uncomplicated skin and skin structure infections. (1.4) , 5 Complicated intra-abdominal infections (used in combination with metronidazole) in adults. (1.5) .</IndicationAndUsage>
<Description>Cefepime for Injection, USP is a semi-synthetic, cephalosporin antibacterial for parenteral administration. The chemical name is 1-[[(6R,7R)-7-[2-(2-amino-4-thiazolyl)-glyoxylamido]-2-carboxy-8-oxo-5-thia-1-azabyciclo[4.2.0] oct-2-en-3-yl]methyl]-1-methylpyrrolidinum chloride,72-(Z)-O-methyloxime), monohydrochloride, monohydrate, which corresponds to the following structural formula. Cefepime hydrochloride is a white to pale yellow powder. Cefepime hydrochloride contains the equivalent of not less than 825 mcg and not more than 911 mcg of cefepime (C19H24N6O5S2) per mg, calculated on an anhydrous basis. It is highly soluble in water. Cefepime for Injection, USP is supplied for intramuscular or intravenous administration in strengths equivalent to 1 gram and 2 grams of cefepime. Cefepime for Injection, USP is a sterile, dry mixture of cefepime hydrochloride and L-arginine. The L-arginine, at an approximate concentration of 707 mg/g of cefepime, is added to control the pH of the constituted solution at 4 to 6. Freshly constituted solutions of Cefepime for Injection, USP will range in color from pale yellow to amber.</Description>
</NDC>
<NDC>
<NDCCode>71288-014-21</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (71288-014-21) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (71288-014-20) </PackageDescription>
<NDC11Code>71288-0014-21</NDC11Code>
<ProductNDC>71288-014</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Meropenem</ProprietaryName>
<NonProprietaryName>Meropenem</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20191104</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204858</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>MEROPENEM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Carbapenems [CS],Penem Antibacterial [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191104</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71288-021-21</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (71288-021-21) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (71288-021-20) </PackageDescription>
<NDC11Code>71288-0021-21</NDC11Code>
<ProductNDC>71288-021</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefepime</ProprietaryName>
<NonProprietaryName>Cefepime Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200721</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212721</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>CEFEPIME HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200721</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cefepime for injection is a cephalosporin antibacterial indicated for the treatment of the following infections caused by susceptible strains of the designated microorganisms: : 1 Pneumonia. (1.1) , 2 Empiric therapy for febrile neutropenic patients. (1.2) , 3 Uncomplicated and complicated urinary tract infections (including pyelonephritis). (1.3) , 4 Uncomplicated skin and skin structure infections. (1.4) , 5 Complicated intra-abdominal infections (used in combination with metronidazole) in adults. (1.5) .</IndicationAndUsage>
<Description>Cefepime for Injection, USP is a semi-synthetic, cephalosporin antibacterial for parenteral administration. The chemical name is 1-[[(6R,7R)-7-[2-(2-amino-4-thiazolyl)-glyoxylamido]-2-carboxy-8-oxo-5-thia-1-azabyciclo[4.2.0] oct-2-en-3-yl]methyl]-1-methylpyrrolidinum chloride,72-(Z)-O-methyloxime), monohydrochloride, monohydrate, which corresponds to the following structural formula:. Cefepime hydrochloride is a white to pale yellow powder. Cefepime hydrochloride contains the equivalent of not less than 825 mcg and not more than 911 mcg of cefepime (C19H24N6O5S2) per mg, calculated on an anhydrous basis. It is highly soluble in water. Cefepime for Injection, USP is supplied for intramuscular or intravenous administration in strengths equivalent to 1 gram and 2 grams of cefepime. Cefepime for Injection, USP is a sterile, dry mixture of cefepime hydrochloride and L-arginine. The L-arginine, at an approximate concentration of 707 mg/g of cefepime, is added to control the pH of the constituted solution at 4 to 6. Freshly constituted solutions of Cefepime for Injection, USP will range in color from pale yellow to amber.</Description>
</NDC>
<NDC>
<NDCCode>71288-023-21</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (71288-023-21) / 20 mL in 1 VIAL, SINGLE-DOSE (71288-023-20) </PackageDescription>
<NDC11Code>71288-0023-21</NDC11Code>
<ProductNDC>71288-023</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220728</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215197</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/20mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220728</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin hydrochloride-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), Vancomycin Hydrochloride for Injection has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin hydrochloride. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection and other antibacterial drugs, Vancomycin Hydrochloride for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin hydrochloride is not effective by the oral route for other types of infections.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection, USP, is a white or off-white to light tan-colored lyophilized powder or cake, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg or 1 gram vancomycin base. 500 mg of the base is equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg per mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is [3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. Vancomycin hydrochloride has the following structural formula. C66H75Cl2N9O24HCl M.W. 1485.71.</Description>
</NDC>
<NDC>
<NDCCode>71288-024-21</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (71288-024-21) / 15 mL in 1 VIAL, SINGLE-DOSE (71288-024-20) </PackageDescription>
<NDC11Code>71288-0024-21</NDC11Code>
<ProductNDC>71288-024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220915</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215195</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/15mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-03-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection is a glycopeptide antibacterial indicated in adult and pediatric patients (neonates and older) for the treatment of: : 1 Septicemia (1.1) , 2 Infective Endocarditis (1.2) , 3 Skin and Skin Structure Infections (1.3) , 4 Bone Infections (1.4) , 5 Lower Respiratory Tract Infections (1.5) .</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection, USP, contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride, USP is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride, USP has the following structural formula. Vancomycin Hydrochloride for Injection, USP is a sterile white or off white to light tan colored lyophilized powder or cake for injection. Vancomycin Hydrochloride for Injection, USP is supplied in single-dose vials, containing 769 mg of vancomycin hydrochloride, USP equivalent to 750 mg of vancomycin base. The lyophilized powder is reconstituted with Sterile Water for Injection, USP which forms a clear, colorless to light yellow or tan solution and subsequently diluted prior to intravenous administration [see Dosage and Administration (2.5)].</Description>
</NDC>
<NDC>
<NDCCode>71288-027-30</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (71288-027-30) / 20 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>71288-0027-30</NDC11Code>
<ProductNDC>71288-027</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Voriconazole</ProprietaryName>
<NonProprietaryName>Voriconazole</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220509</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214516</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>VORICONAZOLE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220509</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Voriconazole for Injection is an azole antifungal indicated for the treatment of adults and pediatric patients 2 years of age and older with: : 1 Invasive aspergillosis (1.1) , 2 Candidemia in non-neutropenics and other deep tissue Candida infections (1.2) , 3 Esophageal candidiasis (1.3) , 4 Serious fungal infections caused by Scedosporium apiospermum and Fusarium species including Fusarium solani, in patients intolerant of, or refractory to, other therapy (1.4) .</IndicationAndUsage>
<Description>Voriconazole, an azole antifungal agent is available as a lyophilized powder for solution for intravenous infusion. The structural formula is. Voriconazole is designated chemically as (2R,3S)-2-(2, 4-difluorophenyl)-3-(5-fluoro-4-pyrimidinyl)-1-(1H-1,2,4-triazol-1-yl)-2-butanol with an empirical formula of C16H14F3N5O and a molecular weight of 349.31. Voriconazole drug substance is a white to light-colored powder. Voriconazole for Injection is a white to off-white lyophilized powder or cake containing nominally 200 mg voriconazole and 3,200 mg sulfobutyl ether beta-cyclodextrin sodium in a 30 mL Type I clear glass vial. Voriconazole for Injection is intended for administration by intravenous infusion. It is a single-dose, unpreserved product. Vials containing 200 mg lyophilized voriconazole are intended for reconstitution with Water for Injection to produce a solution containing 10 mg per mL voriconazole and 160 mg per mL of sulfobutyl ether beta-cyclodextrin sodium. The resultant solution is further diluted prior to administration as an intravenous infusion [see Dosage and Administration (2)].</Description>
</NDC>
<NDC>
<NDCCode>71288-030-21</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (71288-030-21) / 10 mL in 1 VIAL, SINGLE-DOSE (71288-030-20) </PackageDescription>
<NDC11Code>71288-0030-21</NDC11Code>
<ProductNDC>71288-030</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline</ProprietaryName>
<NonProprietaryName>Doxycycline</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20241028</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218053</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241028</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of Doxycycline for Injection and other antibacterial drugs, Doxycycline for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline for Injection is indicated in infections caused by the following microorganisms: 1 Rickettsiae (Rocky Mountain spotted fever, typhus fever, and the typhus group, Q fever, rickettsial pox and tick fevers)., 2 Mycoplasma pneumoniae (PPLO, Eaton Agent)., 3 Agents of psittacosis and ornithosis., 4 Agents of lymphogranuloma venereum and granuloma inguinale., 5 The spirochetal agent of relapsing fever (Borrelia recurrentis).</IndicationAndUsage>
<Description>Doxycycline for Injection, USP is a sterile, lyophilized powder prepared from a solution of doxycycline hyclate, ascorbic acid and mannitol in Water for Injection. Doxycycline hyclate is a broad spectrum antibiotic derived from oxytetracycline. It is meant for INTRAVENOUS use only after reconstitution. Doxycycline hyclate is a yellow to light yellow crystalline powder which is chemically designated 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-de monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. It has the following structural formula. (C22H24N2O8 HCl)2 C2H6O H2O M.W. 1025.88. Doxycycline hyclate is soluble in water and chars at 201°C without melting. The base doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Each 100 mg vial contains: Doxycycline hyclate equivalent to 100 mg doxycycline; ascorbic acid 480 mg; mannitol 300 mg. pH of the reconstituted solution (10 mg per mL) is between 1.8 and 3.3.</Description>
</NDC>
<NDC>
<NDCCode>71288-031-21</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (71288-031-21) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (71288-031-20) </PackageDescription>
<NDC11Code>71288-0031-21</NDC11Code>
<ProductNDC>71288-031</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin And Sulbactam</ProprietaryName>
<NonProprietaryName>Ampicillin Sodium And Sulbactam Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20051129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065406</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>AMPICILLIN SODIUM; SULBACTAM SODIUM</SubstanceName>
<StrengthNumber>1; .5</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20051129</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin and Sulbactam for Injection is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli*, Klebsiella spp.* (including K. pneumoniae*), Proteus mirabilis*, Bacteroides fragilis*, Enterobacter spp.*, and Acinetobacter calcoaceticus*. NOTE: For information on use in pediatric patients see PRECAUTIONS-Pediatric Use and CLINICAL STUDIES sections. Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae*), Bacteroides spp. (including B. fragilis), and Enterobacter spp.*. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli*, and Bacteroides spp.* (including B. fragilis*). *Efficacy for this organism in this organ system was studied in fewer than 10 infections. While ampicillin and sulbactam for injection is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with ampicillin and sulbactam for injection due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to ampicillin and sulbactam for injection should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to ampicillin and sulbactam for injection. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of ampicillin and sulbactam for injection and other antibacterial drugs, ampicillin and sulbactam for injection should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Ampicillin and Sulbactam for Injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0] heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection, USP is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8 and 10. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 1.5 g vial contains ampicillin 1 g and sulbactam 0.5 g (equivalent to 1.063 g ampicillin sodium and 0.547 g sulbactam sodium). Each 1.5 g vial contains approximately 115 mg of sodium. Each 3 g vial contains ampicillin 2 g and sulbactam 1 g (equivalent to 2.126 g ampicillin sodium and 1.094 g sulbactam sodium). Each 3 g vial contains approximately 230 mg of sodium.</Description>
</NDC>
</NDCList>