{
"NDC": [
{
"NDCCode": "71288-182-05",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (71288-182-05) / 4 mL in 1 VIAL, SINGLE-DOSE (71288-182-04) ",
"NDC11Code": "71288-0182-05",
"ProductNDC": "71288-182",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Daunorubicin Hydrochloride",
"NonProprietaryName": "Daunorubicin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065035",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "DAUNORUBICIN HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250601",
"SamplePackage": "N",
"IndicationAndUsage": "Daunorubicin hydrochloride injection in combination with other approved anticancer drugs is indicated for remission induction in acute nonlymphocytic leukemia (myelogenous, monocytic, erythroid) of adults and for remission induction in acute lymphocytic leukemia of children and adults.",
"Description": "Daunorubicin Hydrochloride Injection consists of the hydrochloride salt of an anthracycline cytotoxic antibiotic produced by a strain of Streptomyces coeruleorubidus. It is provided as a deep red sterile liquid in vials for intravenous administration only. Each mL contains daunorubicin hydrochloride, USP equivalent to 5 mg of daunorubicin, 9 mg sodium chloride, hydrochloric acid (to adjust pH), and water for injection, q.s. It has the following structural formula which may be described with the chemical name of (1S,3S)-3-Acetyl-1,2,3,4,6,11-hexahydro-3,5,12-trihydroxy-10-methoxy-6,11-dioxo-1-naphthacenyl 3-amino-2,3,6-trideoxy-α-L-lyxo-hexopyranoside hydrochloride. C27H29NO10HCl M.W. 563.99. It is a hygroscopic crystalline powder. The pH of a 5 mg/mL aqueous solution is 3 to 4."
},
{
"NDCCode": "71288-100-05",
"PackageDescription": "1 VIAL in 1 CARTON (71288-100-05) > 5 mL in 1 VIAL",
"NDC11Code": "71288-0100-05",
"ProductNDC": "71288-100",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carboplatin",
"NonProprietaryName": "Carboplatin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170619",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077096",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "CARBOPLATIN",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Platinum-based Drug [EPC], Platinum-containing Compounds [EXT]",
"Status": "Deprecated",
"LastUpdate": "2022-12-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20170619",
"SamplePackage": "N"
},
{
"NDCCode": "71288-108-06",
"PackageDescription": "5 VIAL, SINGLE-DOSE in 1 CARTON (71288-108-06) > 5 mL in 1 VIAL, SINGLE-DOSE (71288-108-05) ",
"NDC11Code": "71288-0108-06",
"ProductNDC": "71288-108",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cytarabine",
"NonProprietaryName": "Cytarabine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRATHECAL; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20200626",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206189",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "CYTARABINE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2022-01-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200626",
"SamplePackage": "N",
"IndicationAndUsage": "Cytarabine Injection in combination with other approved anti-cancer drugs is indicated for remission induction in acute non-lymphocytic leukemia of adults and pediatric patients. It has also been found useful in the treatment of acute lymphocytic leukemia and the blast phase of chronic myelocytic leukemia. Intrathecal administration of Cytarabine Injection (preservative free preparations only) is indicated in the prophylaxis and treatment of meningeal leukemia.",
"Description": "Cytarabine Injection 100 mg per 5 mL (20 mg per mL), an antineoplastic, is a sterile solution of cytarabine for intravenous, intrathecal or subcutaneous administration. Each mL contains 20 mg Cytarabine, USP (20 mg per mL) in a single dose vial (100 mg per 5 mL). Cytarabine Injection 100 mg per 5 mL is a sterile solution for intravenous, intrathecal or subcutaneous administration. Each mL contains 20 mg Cytarabine, USP, and the following inactive ingredients: sodium chloride 6.8 mg and Water for Injection q.s. When necessary the pH is adjusted with hydrochloric acid and/or sodium hydroxide to a pH of 7.4. Each vial contains approximately 0.58 mEq sodium. Cytarabine is chemically 1-β-D-Arabinofuranosylcytosine. The structural formula is:. Cytarabine is an odorless, white to off-white crystalline powder which is freely soluble in water and slightly soluble in alcohol and in chloroform."
},
{
"NDCCode": "71288-156-05",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (71288-156-05) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "71288-0156-05",
"ProductNDC": "71288-156",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Thiotepa",
"NonProprietaryName": "Thiotepa",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRACAVITARY; INTRAVENOUS; INTRAVESICAL",
"StartMarketingDate": "20231226",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216037",
"LabelerName": "Meitheal Pharmaceuticals Inc",
"SubstanceName": "THIOTEPA",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Alkylating Activity [MoA], Alkylating Drug [EPC]",
"Status": "Active",
"LastUpdate": "2023-12-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231226",
"SamplePackage": "N",
"IndicationAndUsage": "Thiotepa for Injection is an alkylating drug indicated: 1 For treatment of adenocarcinoma of the breast or ovary. (1.2), 2 For controlling intracavitary effusions secondary to diffuse or localized neoplastic diseases of various serosal cavities. (1.3), 3 For treatment of superficial papillary carcinoma of the urinary bladder. (1.4).",
"Description": "Thiotepa for Injection, USP is an alkylating agent. Thiotepa for Injection, USP is supplied as a nonpyrogenic, sterile, white lyophilized powder or lyophilized cake for intravenous, intracavitary, or intravesical use after reconstitution and dilution. Thiotepa for Injection, USP is available in a single-dose vial containing: 1 15 mg thiotepa. After reconstitution with 1.5 mL of water for injection, each mL contains 10 mg thiotepa., 2 100 mg thiotepa. After reconstitution with 10 mL of water for injection, each mL contains 10 mg thiotepa."
},
{
"NDCCode": "71288-175-05",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (71288-175-05) / 5 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "71288-0175-05",
"ProductNDC": "71288-175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Etoposide",
"NonProprietaryName": "Etoposide",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074529",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "ETOPOSIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Topoisomerase Inhibitor [EPC], Topoisomerase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-12-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250201",
"SamplePackage": "N",
"IndicationAndUsage": "Etoposide Injection is indicated in the management of the following neoplasms.",
"Description": "Etoposide Injection, USP (also commonly known as VP-16) is a semisynthetic derivative of podophyllotoxin used in the treatment of certain neoplastic diseases. It is 4'-demethylepipodophyllotoxin 9-[4,6-0-(R)-ethylidene-β-D-glucopyranoside]. It is very soluble in methanol and chloroform, slightly soluble in ethanol, and sparingly soluble in water and ether. It is made more miscible with water by means of organic solvents. Etoposide Injection, USP is available for intravenous use as a sterile 20 mg per mL solution in 100 mg (5 mL), 500 mg (25 mL), or 1 g (50 mL) sterile, multiple dose vials. The pH of the clear, colorless to yellow solution is 3.0 to 4.0. Each mL contains: 20 mg etoposide, USP, 2 mg citric acid anhydrous, 80 mg polysorbate 80, 650 mg polyethylene glycol 300 (57.5% v/v and 65.0% w/v), and 262 mg dehydrated alcohol (33.2% v/v and 26.2% w/v). The structural formula is."
},
{
"NDCCode": "71288-184-05",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (71288-184-05) / 5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "71288-0184-05",
"ProductNDC": "71288-184",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Idarubicin Hydrochloride",
"NonProprietaryName": "Idarubicin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065036",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "IDARUBICIN HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250601",
"SamplePackage": "N",
"IndicationAndUsage": "Idarubicin Hydrochloride Injection in combination with other approved antileukemic drugs is indicated for the treatment of acute myeloid leukemia (AML) in adults. This includes French-American-British (FAB) classifications M1 through M7.",
"Description": "Idarubicin Hydrochloride Injection, USP contains idarubicin hydrochloride, USP and is a sterile, semi-synthetic, preservative-free solution (PFS) antineoplastic anthracycline for intravenous use. Chemically, idarubicin hydrochloride, USP is 5, 12-Naphthacenedione, 9-acetyl-7-[(3-amino-2,3,6-trideoxy-α-L-lyxo-hexopyranosyl)oxy]-7,8,9,10-tetrahydro-6,9,11-trihydroxyhydrochloride, (7S-cis). The structural formula is as follows. C26H27NO9HCl M.W. 533.95. Idarubicin Hydrochloride Injection, USP is a sterile, clear, orange-red, isotonic parenteral preservative-free solution, available in 5 mL (5 mg), 10 mL (10 mg) and 20 mL (20 mg) single-dose-only vials. Each mL contains idarubicin hydrochloride USP, 1 mg (equivalent to 0.93 mg idarubicin free base) and the following inactive ingredients: glycerin USP, 25 mg and q.s. water for injection, USP. Hydrochloric acid and/or sodium hydroxide is used to adjust pH to a target of 3.5."
},
{
"NDCCode": "71288-203-05",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (71288-203-05) / 4 mL in 1 VIAL, SINGLE-DOSE (71288-203-04) ",
"NDC11Code": "71288-0203-05",
"ProductNDC": "71288-203",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Furosemide",
"NonProprietaryName": "Furosemide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20220127",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212803",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "FUROSEMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220127",
"SamplePackage": "N",
"IndicationAndUsage": "Parenteral therapy should be reserved for patients unable to take oral medication or for patients in emergency clinical situations.",
"Description": "Furosemide is a diuretic which is an anthranilic acid derivative. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide Injection, USP 10 mg per mL is a sterile, nonpyrogenic solution in vials for intravenous and intramuscular injection. Furosemide is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, sparingly soluble in alcohol, freely soluble in dilute alkali solutions and insoluble in dilute acids. The structural formula is as follows. Each mL contains: Furosemide 10 mg, Water for Injection q.s., Sodium Chloride for isotonicity, Sodium Hydroxide and, if necessary, Hydrochloric Acid to adjust pH between 8.0 and 9.3."
},
{
"NDCCode": "71288-404-05",
"PackageDescription": "25 VIAL, MULTI-DOSE in 1 CARTON (71288-404-05) / 4 mL in 1 VIAL, MULTI-DOSE (71288-404-04) ",
"NDC11Code": "71288-0404-05",
"ProductNDC": "71288-404",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Heparin Sodium",
"NonProprietaryName": "Heparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20190615",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211007",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "HEPARIN SODIUM",
"StrengthNumber": "10000",
"StrengthUnit": "[USP'U]/mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2025-09-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190615",
"SamplePackage": "N",
"IndicationAndUsage": "Heparin Sodium Injection is indicated for: 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism;, 2 Prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease;, 3 Atrial fibrillation with embolization;, 4 Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);, 5 Prevention of clotting in arterial and cardiac surgery;, 6 Prophylaxis and treatment of peripheral arterial embolism., 7 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures.",
"Description": "Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, possessing anticoagulant properties. It is composed of polymers of alternating derivations of α-D-glucosamido (N-sulfated O-sulfated or N-acetylated) and O-sulfated uronic acid (α-L-iduronic acid or β-D-glucoronic acid). Structure of heparin sodium (representative subunits). Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Heparin Sodium Injection, USP preserved with Benzyl Alcohol is available in the following concentrations per mL. pH 5.0-7.5; sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment."
},
{
"NDCCode": "71288-408-06",
"PackageDescription": "25 VIAL, MULTI-DOSE in 1 CARTON (71288-408-06) > 5 mL in 1 VIAL, MULTI-DOSE (71288-408-05) ",
"NDC11Code": "71288-0408-06",
"ProductNDC": "71288-408",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glycopyrrolate",
"NonProprietaryName": "Glycopyrrolate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190515",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211705",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "GLYCOPYRROLATE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-10-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190515",
"EndMarketingDatePackage": "20231030",
"SamplePackage": "N",
"IndicationAndUsage": "Glycopyrrolate Injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, Glycopyrrolate Injection may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants.",
"Description": "Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains. Glycopyrrolate, USP 0.2 mg. Water for Injection, USP q.s. Benzyl Alcohol, NF 0.9% (preservative). pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.33. Its structural formula is as follows. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection, USP is a clear, colorless, sterile liquid; pH 2.0 – 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P = -1.52) at ambient room temperature (24°C)."
},
{
"NDCCode": "71288-409-05",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (71288-409-05) / 5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "71288-0409-05",
"ProductNDC": "71288-409",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Palonosetron Hydrochloride",
"NonProprietaryName": "Palonosetron Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230814",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215861",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "PALONOSETRON HYDROCHLORIDE",
"StrengthNumber": ".25",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2023-08-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230814",
"SamplePackage": "N",
"IndicationAndUsage": "Palonosetron Hydrochloride Injection is a serotonin-3 (5-HT3) receptor antagonist indicated in. Adults for prevention of: 1 acute and delayed nausea and vomiting associated with initial and repeat courses of moderately emetogenic cancer chemotherapy (MEC). (1), 2 acute nausea and vomiting associated with initial and repeat courses of highly emetogenic cancer chemotherapy (HEC). (1), 3 postoperative nausea and vomiting (PONV) for up to 24 hours following surgery. Efficacy beyond 24 hours has not been demonstrated (1).",
"Description": "Palonosetron Hydrochloride Injection contains palonosetron as palonosetron hydrochloride, an antiemetic and antinauseant agent. It is a serotonin-3 (5-HT3) receptor antagonist with a strong binding affinity for this receptor. Chemically, palonosetron hydrochloride is: (3aS)-2-[(S)-1-Azabicyclo [2.2.2]oct-3-yl]-2,3,3a,4,5,6-hexahydro-1-oxo-1Hbenz[de]isoquinoline hydrochloride. The empirical formula is C19H24N2O.HCl, with a molecular weight of 332.87. Palonosetron hydrochloride exists as a single isomer and has the following structural formula. Palonosetron hydrochloride is a white to off-white crystalline powder. It is freely soluble in water, soluble in propylene glycol, and slightly soluble in ethanol and 2-propanol. Palonosetron Hydrochloride Injection is a sterile, clear, colorless, nonpyrogenic, isotonic, buffered solution for intravenous administration. Palonosetron Hydrochloride Injection is available as a 5 mL single-dose vial. Each 5 mL vial contains: 0.25 mg palonosetron (equivalent to 0.28 mg palonosetron hydrochloride), 207.5 mg mannitol, USP, edetate disodium dihydrate, USP, and citrate and citric acid buffers in water for intravenous administration. Hydrochloric acid, NF or sodium hydroxide, NF may have been added to adjust the pH of the solution to 4.5 to 5.5."
},
{
"NDCCode": "71288-415-06",
"PackageDescription": "25 VIAL, MULTI-DOSE in 1 CARTON (71288-415-06) / 5 mL in 1 VIAL, MULTI-DOSE (71288-415-05) ",
"NDC11Code": "71288-0415-06",
"ProductNDC": "71288-415",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glycopyrrolate",
"NonProprietaryName": "Glycopyrrolate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20210706",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212802",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "GLYCOPYRROLATE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210706",
"SamplePackage": "N",
"IndicationAndUsage": "Glycopyrrolate Injection is an anticholinergic indicated. in anesthesia (adult and pediatric patients): 1 for reduction of salivary, tracheobronchial, and pharyngeal secretions, reduction of volume and acidity of gastric secretions, and blockade of cardiac inhibitory reflexes during induction of anesthesia and intubation., 2 intraoperatively to counteract surgically or drug-induced or vagal reflex-associated arrhythmias., 3 for protection against peripheral muscarinic effects of cholinergic agents. (1).",
"Description": "Glycopyrrolate is a synthetic anticholinergic agent. It is a quaternary ammonium salt with the following chemical name. 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.34. Its structural formula is as follows. C19H28BrNO3 398.34. Glycopyrrolate occurs as a white, odorless, crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. It is completely ionized at physiological pH values. Glycopyrrolate Injection, USP is a clear, colorless, sterile liquid with a pH of 2.0 to 3.0. The partition coefficient of glycopyrrolate in n-octanol/water system is 0.304 (log10 P = -1.52) at ambient room temperature (24°C). Glycopyrrolate Injection, USP is intended for intramuscular or intravenous administration. Each 1 mL contains 0.2 mg of glycopyrrolate, water for injection, and hydrochloric acid or sodium hydroxide as pH adjusters."
},
{
"NDCCode": "71288-439-05",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (71288-439-05) / 4 mL in 1 VIAL, SINGLE-USE (71288-439-04) ",
"NDC11Code": "71288-0439-05",
"ProductNDC": "71288-439",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Norepinephrine Bitartrate",
"NonProprietaryName": "Norepinephrine Bitartrate",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20241201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040455",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "NOREPINEPHRINE BITARTRATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Catecholamine [EPC], Catecholamines [CS]",
"Status": "Active",
"LastUpdate": "2024-12-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241201",
"SamplePackage": "N",
"IndicationAndUsage": "Norepinephrine Bitartrate Injection is indicated to raise blood pressure in adult patients with severe, acute hypotension.",
"Description": "Norepinephrine (sometimes referred to as l-arterenol/Levarterenol or l-norepinephrine) is a sympathomimetic amine which differs from epinephrine by the absence of a methyl group on the nitrogen atom. Norepinephrine bitartrate, USP is (-)-α-(aminomethyl)-3,4-dihydroxybenzyl alcohol tartrate (1:1) (salt) monohydrate (molecular weight 337.3 g/mol) and has the following structural formula. Norepinephrine Bitartrate Injection, USP is supplied in a sterile aqueous solution in the form of the bitartrate salt to be administered by intravenous infusion. Norepinephrine is sparingly soluble in water, very slightly soluble in alcohol and ether, and readily soluble in acids. Each mL contains 1 mg of norepinephrine base (equivalent to 1.89 mg of norepinephrine bitartrate, anhydrous basis), sodium chloride for isotonicity, not more than 2 mg of sodium metabisulfite as an antioxidant. It has a pH of 3.0 to 4.5. The air in the vials has been displaced by nitrogen gas."
},
{
"NDCCode": "71288-504-05",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (71288-504-05) / 5 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "71288-0504-05",
"ProductNDC": "71288-504",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Haloperidol Decanoate",
"NonProprietaryName": "Haloperidol Decanoate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20210726",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214507",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "HALOPERIDOL DECANOATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Typical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210726",
"SamplePackage": "N",
"IndicationAndUsage": "Haloperidol Decanoate Injection is indicated for the treatment of schizophrenia in adults who were previously taking a stable dosage of an immediate-release oral haloperidol product.",
"Description": "Haloperidol Decanoate Injection is the decanoate ester of haloperidol, for intramuscular use. Haloperidol is a typical antipsychotic. The structural formula of haloperidol decanoate is 4-(4-chlorophenyl)-1-[4-(4-fluorophenyl)-4-oxobutyl] piperidin-4-yl decanoate. The molecular formula is C31H41CIFNO3 and has a molecular weight of 530.12. Haloperidol decanoate is almost insoluble in water (0.01 mg/mL) but is soluble in most organic solvents. Each mL of Haloperidol Decanoate Injection contains: 1 50 mg of haloperidol (present as 70.52 mg of haloperidol decanoate) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative., 2 100 mg of haloperidol (present as 141.04 mg of haloperidol decanoate) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative."
},
{
"NDCCode": "71288-700-06",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 CARTON (71288-700-06) / 5 mL in 1 VIAL, MULTI-DOSE (71288-700-05) ",
"NDC11Code": "71288-0700-06",
"ProductNDC": "71288-700",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rocuronium Bromide",
"NonProprietaryName": "Rocuronium Bromide",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230508",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213453",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "ROCURONIUM BROMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2023-05-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230508",
"SamplePackage": "N",
"IndicationAndUsage": "Rocuronium Bromide Injection is indicated for inpatients and outpatients as an adjunct to general anesthesia to facilitate both rapid sequence and routine tracheal intubation, and to provide skeletal muscle relaxation during surgery or mechanical ventilation.",
"Description": "Rocuronium Bromide Injection is a nondepolarizing neuromuscular blocking agent with a rapid to intermediate onset depending on dose and intermediate duration. Rocuronium bromide is chemically designated as 1-[17β-(acetyloxy)-3α-hydroxy-2β-(4-morpholinyl)-5α-androstan-16β-yl]-1-(2-propenyl)pyrrolidinium bromide. The structural formula is. The chemical formula is C32H53BrN2O4 with a molecular weight of 609.70. The partition coefficient of rocuronium bromide in n-octanol/water is 0.5 at 20°C. Rocuronium Bromide Injection is supplied as a sterile, nonpyrogenic, isotonic solution that is clear, colorless to yellow, for intravenous injection only. Each mL contains 10 mg rocuronium bromide and 2 mg sodium acetate trihydrate. The aqueous solution is adjusted to isotonicity with sodium chloride (3.3 mg per mL) and to a pH of 4 with glacial acetic acid and/or sodium hydroxide."
},
{
"NDCCode": "71288-701-05",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (71288-701-05) / 5 mL in 1 VIAL, SINGLE-DOSE (71288-701-06) ",
"NDC11Code": "71288-0701-05",
"ProductNDC": "71288-701",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atracurium Besylate",
"NonProprietaryName": "Atracurium Besylate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180515",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091488",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "ATRACURIUM BESYLATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2024-12-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180515",
"SamplePackage": "N",
"IndicationAndUsage": "Atracurium besylate injection is indicated, as an adjunct to general anesthesia, to facilitate endotracheal intubation and to provide skeletal muscle relaxation during surgery or mechanical ventilation.",
"Description": "Atracurium besylate is an intermediate-duration, nondepolarizing, skeletal muscle relaxant for intravenous administration. Atracurium besylate is designated as 2-(2-Carboxyethyl)-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methyl-1-veratrylisoquinolinium benzenesulfonate, pentamethylene ester. It has a molecular weight of 1243.49, and its molecular formula is C65H82N2O18S2. The structural formula is. Atracurium besylate is a complex molecule containing four sites at which different stereochemical configurations can occur. The symmetry of the molecule, however, results in only ten, instead of sixteen, possible different isomers. The manufacture of atracurium besylate results in these isomers being produced in unequal amounts but with a consistent ratio. Those molecules in which the methyl group attached to the quaternary nitrogen projects on the opposite side to the adjacent substituted-benzyl moiety predominate by approximately 3:1. Atracurium Besylate Injection, USP is a sterile, non-pyrogenic aqueous solution. Each mL contains 10 mg atracurium besylate. The pH is adjusted to 3.25 to 3.65 with benzenesulfonic acid. The multiple dose vial contains 0.9% benzyl alcohol added as a preservative. Atracurium besylate injection slowly loses potency with time at the rate of approximately 6% per year under refrigeration (5°C). Atracurium besylate injection should be refrigerated at 2° to 8°C (36° to 46°F) to preserve potency. Rate of loss in potency increases to approximately 5% per month at 25°C (77°F). Upon removal from refrigeration to room temperature storage conditions (25°C / 77°F), use atracurium besylate injection within 14 days even if re-refrigerated."
},
{
"NDCCode": "71288-712-06",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (71288-712-06) / 5 mL in 1 VIAL, SINGLE-DOSE (71288-712-05) ",
"NDC11Code": "71288-0712-06",
"ProductNDC": "71288-712",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cisatracurium Besylate",
"NonProprietaryName": "Cisatracurium Besylate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20191031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211668",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "CISATRACURIUM BESYLATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2023-02-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191031",
"SamplePackage": "N",
"IndicationAndUsage": "Cisatracurium Besylate Injection is indicated: : 1 as an adjunct to general anesthesia to facilitate tracheal intubation in adults and in pediatric patients 1 month to 12 years of age , 2 to provide skeletal muscle relaxation in adults during surgical procedures or during mechanical ventilation in the ICU , 3 to provide skeletal muscle relaxation during surgical procedures via infusion in pediatric patients 2 years and older .",
"Description": "Cisatracurium besylate is a nondepolarizing skeletal neuromuscular blocker for intravenous administration. Compared to other neuromuscular blockers, it is intermediate in its onset and duration of action. Cisatracurium Besylate Injection, USP contains cisatracurium besylate as the active pharmaceutical ingredient. Cisatracurium besylate is one of 10 isomers of atracurium besylate and constitutes approximately 15% of that mixture. Cisatracurium besylate is [1R-[1α,2α(1'R*,2'R*)]]-2,2'-[1,5-pentanediylbis[oxy(3-oxo-3,1-propanediyl)]]bis[1-[(3,4-dimethoxyphenyl)methyl]-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methylisoquinolinium] dibenzenesulfonate. The molecular formula of the cisatracurium parent bis-cation is C53H72N2O12 and the molecular weight is 929.2. The molecular formula of cisatracurium as the besylate salt is C65H82N2O18S2 and the molecular weight is 1243.48. The structural formula of cisatracurium besylate is. The log of the partition coefficient of cisatracurium besylate is -2.12 in a 1-octanol/distilled water system at 25°C. Cisatracurium Besylate Injection, USP is a sterile, nonpyrogenic aqueous solution. Each mL in the single-dose vials contains either 2 mg or 10 mg of cisatracurium (equivalent to 2.68 mg and 13.38 mg of cisatracurium besylate; respectively), and benzenesulfonic acid as pH adjuster in water for injection. Each mL in the multi-dose vials contains 2 mg of cisatracurium (equivalent to 2.68 mg of cisatracurium besylate), benzenesulfonic acid as pH adjuster, and also contains 9 mg of benzyl alcohol as preservative, in water for injection. The pH of Cisatracurium Besylate Injection, USP is between 3.0 and 3.8."
},
{
"NDCCode": "71288-805-06",
"PackageDescription": "6 VIAL, SINGLE-DOSE in 1 CARTON (71288-805-06) > 5 mL in 1 VIAL, SINGLE-DOSE (71288-805-05) ",
"NDC11Code": "71288-0805-06",
"ProductNDC": "71288-805",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isosulfan Blue",
"NonProprietaryName": "Isosulfan Blue",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20211103",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213130",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "ISOSULFAN BLUE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2021-11-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20211103",
"SamplePackage": "N",
"IndicationAndUsage": "Isosulfan Blue Injection 1% upon subcutaneous administration, delineates the lymphatic vessels draining the region of injection. It is an adjunct to lymphography in: primary and secondary lymphedema of the extremities; chyluria, chylous ascites or chylothorax; lymph node involvement by primary or secondary neoplasm; lymph node response to therapeutic modalities (1.1).",
"Description": "The chemical name of Isosulfan Blue Injection 1% is N-[4-[[4-(diethylamino)phenyl] (2,5- disulfophenyl) methylene]-2,5-cyclohexadien-1-ylidene]-N-ethylethanaminium hydroxide, inner salt, sodium salt. Its structural formula is. Isosulfan Blue Injection 1% is a sterile aqueous solution for subcutaneous administration. Phosphate buffer in sterile, nonpyrogenic water is added in sufficient quantity to yield a final pH of 6.8 to 7.4. Each mL of solution contains 10 mg isosulfan blue, 6.6 mg dibasic sodium phosphate, anhydrous and 2.7 mg monobasic potassium phosphate. The solution contains no preservative. Isosulfan Blue Injection 1% is a contrast agent for the delineation of lymphatic vessels."
},
{
"NDCCode": "13537-182-06",
"PackageDescription": "1 TUBE in 1 BOX (13537-182-06) > 2.2 g in 1 TUBE (13537-182-05)",
"NDC11Code": "13537-0182-06",
"ProductNDC": "13537-182",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Esika Pro Perfect Match Volumen",
"ProprietaryNameSuffix": "(rosa Deseo) - Red",
"NonProprietaryName": "Octinoxate",
"DosageFormName": "LIPSTICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20150710",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Ventura Corporation LTD",
"SubstanceName": "OCTINOXATE",
"StrengthNumber": ".075",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Helps prevent sunburn."
},
{
"NDCCode": "13668-182-05",
"PackageDescription": "500 TABLET, COATED in 1 BOTTLE (13668-182-05) ",
"NDC11Code": "13668-0182-05",
"ProductNDC": "13668-182",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rosuvastatin Calcium",
"NonProprietaryName": "Rosuvastatin Calcium",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20161031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201619",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "ROSUVASTATIN CALCIUM",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20161031",
"SamplePackage": "N",
"IndicationAndUsage": "Rosuvastatin tablets are an HMG Co-A reductase inhibitor (statin) indicated: (1) To reduce the risk of major adverse cardiovascular (CV) events (CV death, nonfatal myocardial infarction, nonfatal stroke, or an arterial revascularization procedure) in adults at increased risk for CV events. As an adjunct to diet and exercise to reduce low-density lipoprotein cholesterol (LDL-C):o in adults with primary hypercholesterolemia.o and slow the progression of atherosclerosis in adults.o in adults and pediatric patients aged 8 years and older with heterozygous familial hypercholesterolemia (HeFH).o in adults and pediatric patients aged 7 years and older with homozygous familial hypercholesterolemia (HoFH). As an adjunct to diet for the treatment of adults with:o Primary dysbetalipoproteinemia.o Hypertriglyceridemia.",
"Description": "Rosuvastatin is a 3-hydroxy-3-methylglutaryl coenzyme A (HMG CoA)-reductase inhibitor. The chemical name for rosuvastatin calcium USP is bis[(E)-7-[4- (4-fluorophenyl)-6-isopropyl-2 [methyl(methylsulfonyl)amino] pyrimidin-5-yl](3R,5S) -3,5-dihydroxyhept-6-enoic acid] calcium salt with the following structural formula. The empirical formula for rosuvastatin calcium USP is (C 22H 27FN 3O 6S) 2Ca and the molecular weight is 1001.14. Rosuvastatin calcium is a white amorphous powder that is sparingly soluble in water and methanol, and slightly soluble in ethanol. Rosuvastatin calcium is a hydrophilic compound with a partition coefficient (octanol/water) of 0.13 at pH of 7.0. Rosuvastatin tablets for oral use contain rosuvastatin 5 mg, 10 mg, 20 mg, or 40 mg (equivalent to 5.2 mg, 10.4 mg, 20.8 mg, and 41.6 mg rosuvastatin calcium) and the following inactive ingredients: Each tablet contains: crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, titanium dioxide and triacetin. Additionally, the 5 mg tablet contains ferric oxide yellow and the 10 mg, 20 mg and 40 mg tablets contain ferric oxide red."
},
{
"NDCCode": "31722-182-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (31722-182-05) ",
"NDC11Code": "31722-0182-05",
"ProductNDC": "31722-182",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Topiramate",
"NonProprietaryName": "Topiramate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20210922",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215414",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "TOPIRAMATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2025-05-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210922",
"SamplePackage": "N",
"Description": "Topiramate is a sulfamate-substituted monosaccharide. Topiramate tablets, USP are available as 25 mg, 50 mg, 100 mg, and 200 mg round tablets for oral administration. Topiramate is a white crystalline powder with a bitter taste. Topiramate is most soluble in alkaline solutions containing sodium hydroxide or sodium phosphate and having a pH of 9 to 10. It is freely soluble in acetone, chloroform, dimethylsulfoxide, and ethanol. The solubility in water is 9.8 mg/mL. Its saturated solution has a pH of 6.3. Topiramate has the molecular formula C12H21NO8S and a molecular weight of 339.36. Topiramate is designated chemically as 2,3:4,5-Di-O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula. Topiramate tablets contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pre-gelatinized starch, hypromellose, sodium starch glycolate, magnesium stearate, titanium dioxide, polyethylene glycol. The 25 mg strength also contains polysorbate. The 50 mg strength also contains polysorbate, iron oxide yellow and iron oxide red. The 100 mg strength also contains polysorbate and iron oxide yellow. The 200 mg strength also contains iron oxide red. FDA approved tests Assay and related compounds differ from USP.FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "43598-182-05",
"PackageDescription": "5 BAG in 1 CARTON (43598-182-05) / 250 mL in 1 BAG (43598-182-50) ",
"NDC11Code": "43598-0182-05",
"ProductNDC": "43598-182",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenylephrine Hydrochloride Injection, Solution",
"NonProprietaryName": "Phenylephrine Hydrochloride Injection, Solution",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250701",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA216830",
"LabelerName": "Dr. Reddy's Laboratories Inc.",
"SubstanceName": "PHENYLEPHRINE",
"StrengthNumber": "80",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250701",
"SamplePackage": "N",
"IndicationAndUsage": "Phenylephrine Hydrochloride in 0.9% Sodium Chloride Injection is indicated for increasing blood pressure in adults with clinically important hypotension resulting primarily from vasodilation in the setting of anesthesia.",
"Description": "Phenylephrine Hydrochloride in 0.9% Sodium Chloride Injection, 80 mcg/mL (20 mg/250 mL), an alpha-1 adrenergic receptor agonist, contains the active pharmaceutical ingredient phenylephrine in the form of hydrochloride salt. Phenylephrine is a synthetic sympathomimetic agent in sterile form for parenteral injection. Phenylephrine hydrochloride chemical name is (-)-m-Hydroxy-α-[(methylamino) methyl]benzyl alcohol hydrochloride and has the following structural formula. Phenylephrine hydrochloride is very soluble in water, freely soluble in ethanol, and insoluble in chloroform and ethyl ether. Phenylephrine hydrochloride is sensitive to light. Phenylephrine Hydrochloride Injection, USP 80 mcg/mL (20 mg/250 mL, equivalent to 16.4 mg of phenylephrine base per 250 ml) is a clear and colorless sterile aqueous solution, essentially free of visible foreign matter. It is a ready-to-use solution intended for intravenous administration. Each mL contains: 0.08 mg of Phenylephrine Hydrochloride and 9.04 mg of Sodium Chloride in Water for Injection. Phenylephrine Hydrochloride Injection, USP 80 mcg/mL. Hydrochloric acid is added as needed to adjust pH (pH range is 3.0 to 5.0)."
},
{
"NDCCode": "49967-182-05",
"PackageDescription": "1 BOTTLE in 1 CARTON (49967-182-05) / 20 mL in 1 BOTTLE",
"NDC11Code": "49967-0182-05",
"ProductNDC": "49967-182",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Giorgio Armani Designer Lift Smoothing Firming Foundation Broad Spectrum Spf 20 Sunscreen",
"NonProprietaryName": "Octinoxate And Titanium Dioxide",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20060801",
"EndMarketingDate": "20231001",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "L'Oreal USA Products Inc",
"SubstanceName": "OCTINOXATE; TITANIUM DIOXIDE",
"StrengthNumber": "75; 19",
"StrengthUnit": "mg/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2023-10-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20060801",
"EndMarketingDatePackage": "20231001",
"SamplePackage": "N"
},
{
"NDCCode": "55111-182-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (55111-182-05) ",
"NDC11Code": "55111-0182-05",
"ProductNDC": "55111-182",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levetiracetam",
"NonProprietaryName": "Levetiracetam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20090115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076920",
"LabelerName": "Dr. Reddy's Laboratories Limited",
"SubstanceName": "LEVETIRACETAM",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2018-12-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090115",
"SamplePackage": "N",
"Description": "Levetiracetam USP is an antiepileptic drug available as beige colored tablets in 250 mg, 500 mg and 750 mg strengths for oral administration. The chemical name of levetiracetam USP, a single enantiomer, is (-)-(S)-a-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam USP is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam USP is a white to off-white crystalline powder. It is very soluble in water, freely soluble in methanol, chloroform and ethanol. Soluble in acetonitrile and practically insoluble in n-hexane. Levetiracetam tablets USP contain the labeled amount of levetiracetam USP. Inactive ingredients: colloidal silicon dioxide, corn starch, magnesium stearate, microcrystalline cellulose, povidone, talc, sodium starch glycolate and coloring agent contains hypromellose 3cp, hypromellose 6cp, iron oxide yellow, iron oxide red, polyethylene glycol 400, polysorbate 80 and titanium dioxide."
},
{
"NDCCode": "55312-182-05",
"PackageDescription": "181.4 g in 1 TUBE (55312-182-05)",
"NDC11Code": "55312-0182-05",
"ProductNDC": "55312-182",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Western Family Whitening Plus Minty Fresh Mouthwash Anticavity",
"NonProprietaryName": "Sodium Fluoride",
"DosageFormName": "PASTE, DENTIFRICE",
"RouteName": "DENTAL",
"StartMarketingDate": "20081124",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part355",
"LabelerName": "Western Family Foods, Inc",
"SubstanceName": "SODIUM FLUORIDE",
"StrengthNumber": "2.43",
"StrengthUnit": "mg/g",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Helps protect against cavities."
},
{
"NDCCode": "59735-182-06",
"PackageDescription": "1 TUBE in 1 CARTON (59735-182-06) / 30 mL in 1 TUBE (59735-182-05) ",
"NDC11Code": "59735-0182-06",
"ProductNDC": "59735-182",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Your Name Mineral Sheertint Broad Spectrum Spf 20- Sun Glow",
"NonProprietaryName": "Your Name Mineral Sheer Tint",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20110201",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "Mana Product, Inc",
"SubstanceName": "TITANIUM DIOXIDE; ZINC OXIDE",
"StrengthNumber": "5; 5",
"StrengthUnit": "g/30mL; g/30mL",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20110201",
"SamplePackage": "N",
"IndicationAndUsage": "Stop use and ask a doctor if rash occurs."
},
{
"NDCCode": "60429-182-05",
"PackageDescription": "500 CAPSULE, DELAYED RELEASE in 1 BOTTLE (60429-182-05)",
"NDC11Code": "60429-0182-05",
"ProductNDC": "60429-182",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omeprazole",
"NonProprietaryName": "Omeprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20150106",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076048",
"LabelerName": "Golden State Medical Supply, Inc",
"SubstanceName": "OMEPRAZOLE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Proton Pump Inhibitor [EPC],Proton Pump Inhibitors [MoA],Cytochrome P450 2C19 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2017-10-26"
},
{
"NDCCode": "68382-182-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (68382-182-05) ",
"NDC11Code": "68382-0182-05",
"ProductNDC": "68382-182",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buspirone Hydrochloride",
"NonProprietaryName": "Buspirone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140503",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078888",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "BUSPIRONE HYDROCHLORIDE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2025-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140503",
"SamplePackage": "N",
"IndicationAndUsage": "Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone hydrochloride tablets have been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone hydrochloride tablets relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, III1 as follows:. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories. 1. Motor tension:. Shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle. 2. Autonomic hyperactivity:. Sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate. 3. Apprehensive expectation:. Anxiety, worry, fear, rumination, and anticipation of misfortune to self or others. 4. Vigilance and scanning:. Hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling \"on edge,\" irritability, impatience. The above symptoms would not be due to another mental disorder, such as a depressive disorder or schizophrenia. However, mild depressive symptoms are common in GAD. The effectiveness of buspirone hydrochloride tablets in long-term use, that is, for more than 3 to 4 weeks, has not been demonstrated in controlled trials. There is no body of evidence available that systematically addresses the appropriate duration of treatment for GAD. However, in a study of long-term use, 264 patients were treated with buspirone hydrochloride tablets for 1 year without ill effect. Therefore, the physician who elects to use buspirone hydrochloride tablets for extended periods should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Buspirone hydrochloride tablets, USP are an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride, USP is a white crystalline powder. It is very soluble in water; freely soluble in methanol and in methylene chloride; sparingly soluble in ethanol and in acetonitrile; very slightly soluble in ethyl acetate and practically insoluble in hexanes. Its molecular weight is 422. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]butyl]-8-azaspiro[4.5]decane-7,9-dione monohydrochloride. The molecular formula C21H31N5O2HCl is represented by the following structural formula. Each buspirone hydrochloride tablet intended for oral administration contains 5 mg or 7.5 mg or 10 mg or 15 mg or 30 mg buspirone hydrochloride (equivalent to 4.6 mg, 6.85 mg, 9.1 mg, 13.7 mg, and 27.4 mg of buspirone free base, respectively). In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate. The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg and 30 mg tablets are scored so they can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). A single 30 mg tablet can provide the following doses: 30 mg (entire tablet), 20 mg (two thirds of a tablet), 15 mg (one half of a tablet), or 10 mg (one third of a tablet)."
},
{
"NDCCode": "68428-182-05",
"PackageDescription": "150 PELLET in 1 VIAL, GLASS (68428-182-05) ",
"NDC11Code": "68428-0182-05",
"ProductNDC": "68428-182",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Aesculus Hippocastanum",
"NonProprietaryName": "Horse Chestnut",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110126",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "HORSE CHESTNUT",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/1",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20110126",
"SamplePackage": "N",
"IndicationAndUsage": "Indications. AESCULUS HIPP Hemorrhoids."
},
{
"NDCCode": "68828-182-06",
"PackageDescription": "1 TUBE in 1 CARTON (68828-182-06) > 2 mL in 1 TUBE (68828-182-05) ",
"NDC11Code": "68828-0182-06",
"ProductNDC": "68828-182",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Balancing Day Moisture Broad Spectrum Spf 15",
"ProprietaryNameSuffix": "Jafra",
"NonProprietaryName": "Avobenzone,octinoxate, Octisalate, Octisalate, Oxybenzone",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20131028",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Jafra Cosmetics International Inc",
"SubstanceName": "AVOBENZONE; OCTINOXATE; OCTISALATE; OXYBENZONE",
"StrengthNumber": "2.75; 7.5; 5; 2",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20131028",
"SamplePackage": "N"
},
{
"NDCCode": "69315-182-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (69315-182-05) ",
"NDC11Code": "69315-0182-05",
"ProductNDC": "69315-182",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxybutynin Chloride",
"NonProprietaryName": "Oxybutynin Chloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20191101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212798",
"LabelerName": "Leading Pharma, LLC",
"SubstanceName": "OXYBUTYNIN CHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2022-02-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191101",
"SamplePackage": "N",
"IndicationAndUsage": "Oxybutynin chloride is indicated for the relief of symptoms of bladder instability associated with voiding in patients with uninhibited neurogenic or reflex neurogenic bladder (i.e., urgency, frequency, urinary leakage, urge incontinence, dysuria).",
"Description": "Each scored round, uncoated, oxybutynin chloride tablet contains 5 mg of oxybutynin chloride, USP. Chemically, oxybutynin chloride is 4(diethylamino-but-2-ynyl (RS) 2-cyclohexyl-2-hydroxy 2 phenyl acetate hydrochloride. The empirical formula of oxybutynin chloride is C22H31NO3HCl. The structural formula appears below. Oxybutynin Chloride is a white crystalline, practically odorless powder with a molecular weight of 393.95. It is freely soluble in water and in alcohol; very soluble in methanol and in chloroform; soluble in acetone; slightly soluble in ether; very slightly soluble in hexane. Oxybutynin Chloride Tablets, USP also contain magnesium stearate, microcrystalline cellulose, and pregelatinized starch. Oxybutynin Chloride Tablets, USP are for oral administration. Therapeutic Category: Antispasmodic, anticholinergic. FDA approved dissolution test specifications differ from USP."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>71288-182-05</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (71288-182-05) / 4 mL in 1 VIAL, SINGLE-DOSE (71288-182-04) </PackageDescription>
<NDC11Code>71288-0182-05</NDC11Code>
<ProductNDC>71288-182</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Daunorubicin Hydrochloride</ProprietaryName>
<NonProprietaryName>Daunorubicin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065035</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>DAUNORUBICIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Daunorubicin hydrochloride injection in combination with other approved anticancer drugs is indicated for remission induction in acute nonlymphocytic leukemia (myelogenous, monocytic, erythroid) of adults and for remission induction in acute lymphocytic leukemia of children and adults.</IndicationAndUsage>
<Description>Daunorubicin Hydrochloride Injection consists of the hydrochloride salt of an anthracycline cytotoxic antibiotic produced by a strain of Streptomyces coeruleorubidus. It is provided as a deep red sterile liquid in vials for intravenous administration only. Each mL contains daunorubicin hydrochloride, USP equivalent to 5 mg of daunorubicin, 9 mg sodium chloride, hydrochloric acid (to adjust pH), and water for injection, q.s. It has the following structural formula which may be described with the chemical name of (1S,3S)-3-Acetyl-1,2,3,4,6,11-hexahydro-3,5,12-trihydroxy-10-methoxy-6,11-dioxo-1-naphthacenyl 3-amino-2,3,6-trideoxy-α-L-lyxo-hexopyranoside hydrochloride. C27H29NO10HCl M.W. 563.99. It is a hygroscopic crystalline powder. The pH of a 5 mg/mL aqueous solution is 3 to 4.</Description>
</NDC>
<NDC>
<NDCCode>71288-100-05</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (71288-100-05) > 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>71288-0100-05</NDC11Code>
<ProductNDC>71288-100</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carboplatin</ProprietaryName>
<NonProprietaryName>Carboplatin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170619</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077096</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>CARBOPLATIN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Platinum-based Drug [EPC], Platinum-containing Compounds [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-12-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170619</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71288-108-06</NDCCode>
<PackageDescription>5 VIAL, SINGLE-DOSE in 1 CARTON (71288-108-06) > 5 mL in 1 VIAL, SINGLE-DOSE (71288-108-05) </PackageDescription>
<NDC11Code>71288-0108-06</NDC11Code>
<ProductNDC>71288-108</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cytarabine</ProprietaryName>
<NonProprietaryName>Cytarabine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRATHECAL; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20200626</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206189</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>CYTARABINE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-01-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200626</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cytarabine Injection in combination with other approved anti-cancer drugs is indicated for remission induction in acute non-lymphocytic leukemia of adults and pediatric patients. It has also been found useful in the treatment of acute lymphocytic leukemia and the blast phase of chronic myelocytic leukemia. Intrathecal administration of Cytarabine Injection (preservative free preparations only) is indicated in the prophylaxis and treatment of meningeal leukemia.</IndicationAndUsage>
<Description>Cytarabine Injection 100 mg per 5 mL (20 mg per mL), an antineoplastic, is a sterile solution of cytarabine for intravenous, intrathecal or subcutaneous administration. Each mL contains 20 mg Cytarabine, USP (20 mg per mL) in a single dose vial (100 mg per 5 mL). Cytarabine Injection 100 mg per 5 mL is a sterile solution for intravenous, intrathecal or subcutaneous administration. Each mL contains 20 mg Cytarabine, USP, and the following inactive ingredients: sodium chloride 6.8 mg and Water for Injection q.s. When necessary the pH is adjusted with hydrochloric acid and/or sodium hydroxide to a pH of 7.4. Each vial contains approximately 0.58 mEq sodium. Cytarabine is chemically 1-β-D-Arabinofuranosylcytosine. The structural formula is:. Cytarabine is an odorless, white to off-white crystalline powder which is freely soluble in water and slightly soluble in alcohol and in chloroform.</Description>
</NDC>
<NDC>
<NDCCode>71288-156-05</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (71288-156-05) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>71288-0156-05</NDC11Code>
<ProductNDC>71288-156</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Thiotepa</ProprietaryName>
<NonProprietaryName>Thiotepa</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRACAVITARY; INTRAVENOUS; INTRAVESICAL</RouteName>
<StartMarketingDate>20231226</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216037</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc</LabelerName>
<SubstanceName>THIOTEPA</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA], Alkylating Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-12-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231226</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Thiotepa for Injection is an alkylating drug indicated: 1 For treatment of adenocarcinoma of the breast or ovary. (1.2), 2 For controlling intracavitary effusions secondary to diffuse or localized neoplastic diseases of various serosal cavities. (1.3), 3 For treatment of superficial papillary carcinoma of the urinary bladder. (1.4).</IndicationAndUsage>
<Description>Thiotepa for Injection, USP is an alkylating agent. Thiotepa for Injection, USP is supplied as a nonpyrogenic, sterile, white lyophilized powder or lyophilized cake for intravenous, intracavitary, or intravesical use after reconstitution and dilution. Thiotepa for Injection, USP is available in a single-dose vial containing: 1 15 mg thiotepa. After reconstitution with 1.5 mL of water for injection, each mL contains 10 mg thiotepa., 2 100 mg thiotepa. After reconstitution with 10 mL of water for injection, each mL contains 10 mg thiotepa.</Description>
</NDC>
<NDC>
<NDCCode>71288-175-05</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (71288-175-05) / 5 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>71288-0175-05</NDC11Code>
<ProductNDC>71288-175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Etoposide</ProprietaryName>
<NonProprietaryName>Etoposide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074529</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ETOPOSIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Topoisomerase Inhibitor [EPC], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Etoposide Injection is indicated in the management of the following neoplasms.</IndicationAndUsage>
<Description>Etoposide Injection, USP (also commonly known as VP-16) is a semisynthetic derivative of podophyllotoxin used in the treatment of certain neoplastic diseases. It is 4'-demethylepipodophyllotoxin 9-[4,6-0-(R)-ethylidene-β-D-glucopyranoside]. It is very soluble in methanol and chloroform, slightly soluble in ethanol, and sparingly soluble in water and ether. It is made more miscible with water by means of organic solvents. Etoposide Injection, USP is available for intravenous use as a sterile 20 mg per mL solution in 100 mg (5 mL), 500 mg (25 mL), or 1 g (50 mL) sterile, multiple dose vials. The pH of the clear, colorless to yellow solution is 3.0 to 4.0. Each mL contains: 20 mg etoposide, USP, 2 mg citric acid anhydrous, 80 mg polysorbate 80, 650 mg polyethylene glycol 300 (57.5% v/v and 65.0% w/v), and 262 mg dehydrated alcohol (33.2% v/v and 26.2% w/v). The structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>71288-184-05</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (71288-184-05) / 5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>71288-0184-05</NDC11Code>
<ProductNDC>71288-184</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Idarubicin Hydrochloride</ProprietaryName>
<NonProprietaryName>Idarubicin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065036</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>IDARUBICIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Idarubicin Hydrochloride Injection in combination with other approved antileukemic drugs is indicated for the treatment of acute myeloid leukemia (AML) in adults. This includes French-American-British (FAB) classifications M1 through M7.</IndicationAndUsage>
<Description>Idarubicin Hydrochloride Injection, USP contains idarubicin hydrochloride, USP and is a sterile, semi-synthetic, preservative-free solution (PFS) antineoplastic anthracycline for intravenous use. Chemically, idarubicin hydrochloride, USP is 5, 12-Naphthacenedione, 9-acetyl-7-[(3-amino-2,3,6-trideoxy-α-L-lyxo-hexopyranosyl)oxy]-7,8,9,10-tetrahydro-6,9,11-trihydroxyhydrochloride, (7S-cis). The structural formula is as follows. C26H27NO9HCl M.W. 533.95. Idarubicin Hydrochloride Injection, USP is a sterile, clear, orange-red, isotonic parenteral preservative-free solution, available in 5 mL (5 mg), 10 mL (10 mg) and 20 mL (20 mg) single-dose-only vials. Each mL contains idarubicin hydrochloride USP, 1 mg (equivalent to 0.93 mg idarubicin free base) and the following inactive ingredients: glycerin USP, 25 mg and q.s. water for injection, USP. Hydrochloric acid and/or sodium hydroxide is used to adjust pH to a target of 3.5.</Description>
</NDC>
<NDC>
<NDCCode>71288-203-05</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (71288-203-05) / 4 mL in 1 VIAL, SINGLE-DOSE (71288-203-04) </PackageDescription>
<NDC11Code>71288-0203-05</NDC11Code>
<ProductNDC>71288-203</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Furosemide</ProprietaryName>
<NonProprietaryName>Furosemide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20220127</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212803</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>FUROSEMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220127</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Parenteral therapy should be reserved for patients unable to take oral medication or for patients in emergency clinical situations.</IndicationAndUsage>
<Description>Furosemide is a diuretic which is an anthranilic acid derivative. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide Injection, USP 10 mg per mL is a sterile, nonpyrogenic solution in vials for intravenous and intramuscular injection. Furosemide is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, sparingly soluble in alcohol, freely soluble in dilute alkali solutions and insoluble in dilute acids. The structural formula is as follows. Each mL contains: Furosemide 10 mg, Water for Injection q.s., Sodium Chloride for isotonicity, Sodium Hydroxide and, if necessary, Hydrochloric Acid to adjust pH between 8.0 and 9.3.</Description>
</NDC>
<NDC>
<NDCCode>71288-404-05</NDCCode>
<PackageDescription>25 VIAL, MULTI-DOSE in 1 CARTON (71288-404-05) / 4 mL in 1 VIAL, MULTI-DOSE (71288-404-04) </PackageDescription>
<NDC11Code>71288-0404-05</NDC11Code>
<ProductNDC>71288-404</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Heparin Sodium</ProprietaryName>
<NonProprietaryName>Heparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190615</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211007</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>HEPARIN SODIUM</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[USP'U]/mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Heparin Sodium Injection is indicated for: 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism;, 2 Prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease;, 3 Atrial fibrillation with embolization;, 4 Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);, 5 Prevention of clotting in arterial and cardiac surgery;, 6 Prophylaxis and treatment of peripheral arterial embolism., 7 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures.</IndicationAndUsage>
<Description>Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, possessing anticoagulant properties. It is composed of polymers of alternating derivations of α-D-glucosamido (N-sulfated O-sulfated or N-acetylated) and O-sulfated uronic acid (α-L-iduronic acid or β-D-glucoronic acid). Structure of heparin sodium (representative subunits). Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Heparin Sodium Injection, USP preserved with Benzyl Alcohol is available in the following concentrations per mL. pH 5.0-7.5; sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>71288-408-06</NDCCode>
<PackageDescription>25 VIAL, MULTI-DOSE in 1 CARTON (71288-408-06) > 5 mL in 1 VIAL, MULTI-DOSE (71288-408-05) </PackageDescription>
<NDC11Code>71288-0408-06</NDC11Code>
<ProductNDC>71288-408</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glycopyrrolate</ProprietaryName>
<NonProprietaryName>Glycopyrrolate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190515</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211705</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>GLYCOPYRROLATE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-10-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190515</StartMarketingDatePackage>
<EndMarketingDatePackage>20231030</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glycopyrrolate Injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, Glycopyrrolate Injection may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants.</IndicationAndUsage>
<Description>Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains. Glycopyrrolate, USP 0.2 mg. Water for Injection, USP q.s. Benzyl Alcohol, NF 0.9% (preservative). pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.33. Its structural formula is as follows. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection, USP is a clear, colorless, sterile liquid; pH 2.0 – 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P = -1.52) at ambient room temperature (24°C).</Description>
</NDC>
<NDC>
<NDCCode>71288-409-05</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (71288-409-05) / 5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>71288-0409-05</NDC11Code>
<ProductNDC>71288-409</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Palonosetron Hydrochloride</ProprietaryName>
<NonProprietaryName>Palonosetron Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230814</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215861</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>PALONOSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-08-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230814</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Palonosetron Hydrochloride Injection is a serotonin-3 (5-HT3) receptor antagonist indicated in. Adults for prevention of: 1 acute and delayed nausea and vomiting associated with initial and repeat courses of moderately emetogenic cancer chemotherapy (MEC). (1), 2 acute nausea and vomiting associated with initial and repeat courses of highly emetogenic cancer chemotherapy (HEC). (1), 3 postoperative nausea and vomiting (PONV) for up to 24 hours following surgery. Efficacy beyond 24 hours has not been demonstrated (1).</IndicationAndUsage>
<Description>Palonosetron Hydrochloride Injection contains palonosetron as palonosetron hydrochloride, an antiemetic and antinauseant agent. It is a serotonin-3 (5-HT3) receptor antagonist with a strong binding affinity for this receptor. Chemically, palonosetron hydrochloride is: (3aS)-2-[(S)-1-Azabicyclo [2.2.2]oct-3-yl]-2,3,3a,4,5,6-hexahydro-1-oxo-1Hbenz[de]isoquinoline hydrochloride. The empirical formula is C19H24N2O.HCl, with a molecular weight of 332.87. Palonosetron hydrochloride exists as a single isomer and has the following structural formula. Palonosetron hydrochloride is a white to off-white crystalline powder. It is freely soluble in water, soluble in propylene glycol, and slightly soluble in ethanol and 2-propanol. Palonosetron Hydrochloride Injection is a sterile, clear, colorless, nonpyrogenic, isotonic, buffered solution for intravenous administration. Palonosetron Hydrochloride Injection is available as a 5 mL single-dose vial. Each 5 mL vial contains: 0.25 mg palonosetron (equivalent to 0.28 mg palonosetron hydrochloride), 207.5 mg mannitol, USP, edetate disodium dihydrate, USP, and citrate and citric acid buffers in water for intravenous administration. Hydrochloric acid, NF or sodium hydroxide, NF may have been added to adjust the pH of the solution to 4.5 to 5.5.</Description>
</NDC>
<NDC>
<NDCCode>71288-415-06</NDCCode>
<PackageDescription>25 VIAL, MULTI-DOSE in 1 CARTON (71288-415-06) / 5 mL in 1 VIAL, MULTI-DOSE (71288-415-05) </PackageDescription>
<NDC11Code>71288-0415-06</NDC11Code>
<ProductNDC>71288-415</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glycopyrrolate</ProprietaryName>
<NonProprietaryName>Glycopyrrolate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20210706</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212802</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>GLYCOPYRROLATE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210706</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glycopyrrolate Injection is an anticholinergic indicated. in anesthesia (adult and pediatric patients): 1 for reduction of salivary, tracheobronchial, and pharyngeal secretions, reduction of volume and acidity of gastric secretions, and blockade of cardiac inhibitory reflexes during induction of anesthesia and intubation., 2 intraoperatively to counteract surgically or drug-induced or vagal reflex-associated arrhythmias., 3 for protection against peripheral muscarinic effects of cholinergic agents. (1).</IndicationAndUsage>
<Description>Glycopyrrolate is a synthetic anticholinergic agent. It is a quaternary ammonium salt with the following chemical name. 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.34. Its structural formula is as follows. C19H28BrNO3 398.34. Glycopyrrolate occurs as a white, odorless, crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. It is completely ionized at physiological pH values. Glycopyrrolate Injection, USP is a clear, colorless, sterile liquid with a pH of 2.0 to 3.0. The partition coefficient of glycopyrrolate in n-octanol/water system is 0.304 (log10 P = -1.52) at ambient room temperature (24°C). Glycopyrrolate Injection, USP is intended for intramuscular or intravenous administration. Each 1 mL contains 0.2 mg of glycopyrrolate, water for injection, and hydrochloric acid or sodium hydroxide as pH adjusters.</Description>
</NDC>
<NDC>
<NDCCode>71288-439-05</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (71288-439-05) / 4 mL in 1 VIAL, SINGLE-USE (71288-439-04) </PackageDescription>
<NDC11Code>71288-0439-05</NDC11Code>
<ProductNDC>71288-439</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Norepinephrine Bitartrate</ProprietaryName>
<NonProprietaryName>Norepinephrine Bitartrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20241201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040455</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>NOREPINEPHRINE BITARTRATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Catecholamine [EPC], Catecholamines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Norepinephrine Bitartrate Injection is indicated to raise blood pressure in adult patients with severe, acute hypotension.</IndicationAndUsage>
<Description>Norepinephrine (sometimes referred to as l-arterenol/Levarterenol or l-norepinephrine) is a sympathomimetic amine which differs from epinephrine by the absence of a methyl group on the nitrogen atom. Norepinephrine bitartrate, USP is (-)-α-(aminomethyl)-3,4-dihydroxybenzyl alcohol tartrate (1:1) (salt) monohydrate (molecular weight 337.3 g/mol) and has the following structural formula. Norepinephrine Bitartrate Injection, USP is supplied in a sterile aqueous solution in the form of the bitartrate salt to be administered by intravenous infusion. Norepinephrine is sparingly soluble in water, very slightly soluble in alcohol and ether, and readily soluble in acids. Each mL contains 1 mg of norepinephrine base (equivalent to 1.89 mg of norepinephrine bitartrate, anhydrous basis), sodium chloride for isotonicity, not more than 2 mg of sodium metabisulfite as an antioxidant. It has a pH of 3.0 to 4.5. The air in the vials has been displaced by nitrogen gas.</Description>
</NDC>
<NDC>
<NDCCode>71288-504-05</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (71288-504-05) / 5 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>71288-0504-05</NDC11Code>
<ProductNDC>71288-504</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Haloperidol Decanoate</ProprietaryName>
<NonProprietaryName>Haloperidol Decanoate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20210726</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214507</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>HALOPERIDOL DECANOATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Typical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210726</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Haloperidol Decanoate Injection is indicated for the treatment of schizophrenia in adults who were previously taking a stable dosage of an immediate-release oral haloperidol product.</IndicationAndUsage>
<Description>Haloperidol Decanoate Injection is the decanoate ester of haloperidol, for intramuscular use. Haloperidol is a typical antipsychotic. The structural formula of haloperidol decanoate is 4-(4-chlorophenyl)-1-[4-(4-fluorophenyl)-4-oxobutyl] piperidin-4-yl decanoate. The molecular formula is C31H41CIFNO3 and has a molecular weight of 530.12. Haloperidol decanoate is almost insoluble in water (0.01 mg/mL) but is soluble in most organic solvents. Each mL of Haloperidol Decanoate Injection contains: 1 50 mg of haloperidol (present as 70.52 mg of haloperidol decanoate) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative., 2 100 mg of haloperidol (present as 141.04 mg of haloperidol decanoate) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative.</Description>
</NDC>
<NDC>
<NDCCode>71288-700-06</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (71288-700-06) / 5 mL in 1 VIAL, MULTI-DOSE (71288-700-05) </PackageDescription>
<NDC11Code>71288-0700-06</NDC11Code>
<ProductNDC>71288-700</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rocuronium Bromide</ProprietaryName>
<NonProprietaryName>Rocuronium Bromide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230508</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213453</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ROCURONIUM BROMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-05-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230508</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rocuronium Bromide Injection is indicated for inpatients and outpatients as an adjunct to general anesthesia to facilitate both rapid sequence and routine tracheal intubation, and to provide skeletal muscle relaxation during surgery or mechanical ventilation.</IndicationAndUsage>
<Description>Rocuronium Bromide Injection is a nondepolarizing neuromuscular blocking agent with a rapid to intermediate onset depending on dose and intermediate duration. Rocuronium bromide is chemically designated as 1-[17β-(acetyloxy)-3α-hydroxy-2β-(4-morpholinyl)-5α-androstan-16β-yl]-1-(2-propenyl)pyrrolidinium bromide. The structural formula is. The chemical formula is C32H53BrN2O4 with a molecular weight of 609.70. The partition coefficient of rocuronium bromide in n-octanol/water is 0.5 at 20°C. Rocuronium Bromide Injection is supplied as a sterile, nonpyrogenic, isotonic solution that is clear, colorless to yellow, for intravenous injection only. Each mL contains 10 mg rocuronium bromide and 2 mg sodium acetate trihydrate. The aqueous solution is adjusted to isotonicity with sodium chloride (3.3 mg per mL) and to a pH of 4 with glacial acetic acid and/or sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>71288-701-05</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (71288-701-05) / 5 mL in 1 VIAL, SINGLE-DOSE (71288-701-06) </PackageDescription>
<NDC11Code>71288-0701-05</NDC11Code>
<ProductNDC>71288-701</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atracurium Besylate</ProprietaryName>
<NonProprietaryName>Atracurium Besylate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180515</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091488</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ATRACURIUM BESYLATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180515</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atracurium besylate injection is indicated, as an adjunct to general anesthesia, to facilitate endotracheal intubation and to provide skeletal muscle relaxation during surgery or mechanical ventilation.</IndicationAndUsage>
<Description>Atracurium besylate is an intermediate-duration, nondepolarizing, skeletal muscle relaxant for intravenous administration. Atracurium besylate is designated as 2-(2-Carboxyethyl)-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methyl-1-veratrylisoquinolinium benzenesulfonate, pentamethylene ester. It has a molecular weight of 1243.49, and its molecular formula is C65H82N2O18S2. The structural formula is. Atracurium besylate is a complex molecule containing four sites at which different stereochemical configurations can occur. The symmetry of the molecule, however, results in only ten, instead of sixteen, possible different isomers. The manufacture of atracurium besylate results in these isomers being produced in unequal amounts but with a consistent ratio. Those molecules in which the methyl group attached to the quaternary nitrogen projects on the opposite side to the adjacent substituted-benzyl moiety predominate by approximately 3:1. Atracurium Besylate Injection, USP is a sterile, non-pyrogenic aqueous solution. Each mL contains 10 mg atracurium besylate. The pH is adjusted to 3.25 to 3.65 with benzenesulfonic acid. The multiple dose vial contains 0.9% benzyl alcohol added as a preservative. Atracurium besylate injection slowly loses potency with time at the rate of approximately 6% per year under refrigeration (5°C). Atracurium besylate injection should be refrigerated at 2° to 8°C (36° to 46°F) to preserve potency. Rate of loss in potency increases to approximately 5% per month at 25°C (77°F). Upon removal from refrigeration to room temperature storage conditions (25°C / 77°F), use atracurium besylate injection within 14 days even if re-refrigerated.</Description>
</NDC>
<NDC>
<NDCCode>71288-712-06</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (71288-712-06) / 5 mL in 1 VIAL, SINGLE-DOSE (71288-712-05) </PackageDescription>
<NDC11Code>71288-0712-06</NDC11Code>
<ProductNDC>71288-712</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cisatracurium Besylate</ProprietaryName>
<NonProprietaryName>Cisatracurium Besylate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20191031</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211668</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>CISATRACURIUM BESYLATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-02-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cisatracurium Besylate Injection is indicated: : 1 as an adjunct to general anesthesia to facilitate tracheal intubation in adults and in pediatric patients 1 month to 12 years of age , 2 to provide skeletal muscle relaxation in adults during surgical procedures or during mechanical ventilation in the ICU , 3 to provide skeletal muscle relaxation during surgical procedures via infusion in pediatric patients 2 years and older .</IndicationAndUsage>
<Description>Cisatracurium besylate is a nondepolarizing skeletal neuromuscular blocker for intravenous administration. Compared to other neuromuscular blockers, it is intermediate in its onset and duration of action. Cisatracurium Besylate Injection, USP contains cisatracurium besylate as the active pharmaceutical ingredient. Cisatracurium besylate is one of 10 isomers of atracurium besylate and constitutes approximately 15% of that mixture. Cisatracurium besylate is [1R-[1α,2α(1'R*,2'R*)]]-2,2'-[1,5-pentanediylbis[oxy(3-oxo-3,1-propanediyl)]]bis[1-[(3,4-dimethoxyphenyl)methyl]-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methylisoquinolinium] dibenzenesulfonate. The molecular formula of the cisatracurium parent bis-cation is C53H72N2O12 and the molecular weight is 929.2. The molecular formula of cisatracurium as the besylate salt is C65H82N2O18S2 and the molecular weight is 1243.48. The structural formula of cisatracurium besylate is. The log of the partition coefficient of cisatracurium besylate is -2.12 in a 1-octanol/distilled water system at 25°C. Cisatracurium Besylate Injection, USP is a sterile, nonpyrogenic aqueous solution. Each mL in the single-dose vials contains either 2 mg or 10 mg of cisatracurium (equivalent to 2.68 mg and 13.38 mg of cisatracurium besylate; respectively), and benzenesulfonic acid as pH adjuster in water for injection. Each mL in the multi-dose vials contains 2 mg of cisatracurium (equivalent to 2.68 mg of cisatracurium besylate), benzenesulfonic acid as pH adjuster, and also contains 9 mg of benzyl alcohol as preservative, in water for injection. The pH of Cisatracurium Besylate Injection, USP is between 3.0 and 3.8.</Description>
</NDC>
<NDC>
<NDCCode>71288-805-06</NDCCode>
<PackageDescription>6 VIAL, SINGLE-DOSE in 1 CARTON (71288-805-06) > 5 mL in 1 VIAL, SINGLE-DOSE (71288-805-05) </PackageDescription>
<NDC11Code>71288-0805-06</NDC11Code>
<ProductNDC>71288-805</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isosulfan Blue</ProprietaryName>
<NonProprietaryName>Isosulfan Blue</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20211103</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213130</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ISOSULFAN BLUE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2021-11-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211103</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Isosulfan Blue Injection 1% upon subcutaneous administration, delineates the lymphatic vessels draining the region of injection. It is an adjunct to lymphography in: primary and secondary lymphedema of the extremities; chyluria, chylous ascites or chylothorax; lymph node involvement by primary or secondary neoplasm; lymph node response to therapeutic modalities (1.1).</IndicationAndUsage>
<Description>The chemical name of Isosulfan Blue Injection 1% is N-[4-[[4-(diethylamino)phenyl] (2,5- disulfophenyl) methylene]-2,5-cyclohexadien-1-ylidene]-N-ethylethanaminium hydroxide, inner salt, sodium salt. Its structural formula is. Isosulfan Blue Injection 1% is a sterile aqueous solution for subcutaneous administration. Phosphate buffer in sterile, nonpyrogenic water is added in sufficient quantity to yield a final pH of 6.8 to 7.4. Each mL of solution contains 10 mg isosulfan blue, 6.6 mg dibasic sodium phosphate, anhydrous and 2.7 mg monobasic potassium phosphate. The solution contains no preservative. Isosulfan Blue Injection 1% is a contrast agent for the delineation of lymphatic vessels.</Description>
</NDC>
<NDC>
<NDCCode>13537-182-06</NDCCode>
<PackageDescription>1 TUBE in 1 BOX (13537-182-06) > 2.2 g in 1 TUBE (13537-182-05)</PackageDescription>
<NDC11Code>13537-0182-06</NDC11Code>
<ProductNDC>13537-182</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Esika Pro Perfect Match Volumen</ProprietaryName>
<ProprietaryNameSuffix>(rosa Deseo) - Red</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate</NonProprietaryName>
<DosageFormName>LIPSTICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20150710</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Ventura Corporation LTD</LabelerName>
<SubstanceName>OCTINOXATE</SubstanceName>
<StrengthNumber>.075</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Helps prevent sunburn.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>13668-182-05</NDCCode>
<PackageDescription>500 TABLET, COATED in 1 BOTTLE (13668-182-05) </PackageDescription>
<NDC11Code>13668-0182-05</NDC11Code>
<ProductNDC>13668-182</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rosuvastatin Calcium</ProprietaryName>
<NonProprietaryName>Rosuvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20161031</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201619</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>ROSUVASTATIN CALCIUM</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rosuvastatin tablets are an HMG Co-A reductase inhibitor (statin) indicated: (1) To reduce the risk of major adverse cardiovascular (CV) events (CV death, nonfatal myocardial infarction, nonfatal stroke, or an arterial revascularization procedure) in adults at increased risk for CV events. As an adjunct to diet and exercise to reduce low-density lipoprotein cholesterol (LDL-C):o in adults with primary hypercholesterolemia.o and slow the progression of atherosclerosis in adults.o in adults and pediatric patients aged 8 years and older with heterozygous familial hypercholesterolemia (HeFH).o in adults and pediatric patients aged 7 years and older with homozygous familial hypercholesterolemia (HoFH). As an adjunct to diet for the treatment of adults with:o Primary dysbetalipoproteinemia.o Hypertriglyceridemia.</IndicationAndUsage>
<Description>Rosuvastatin is a 3-hydroxy-3-methylglutaryl coenzyme A (HMG CoA)-reductase inhibitor. The chemical name for rosuvastatin calcium USP is bis[(E)-7-[4- (4-fluorophenyl)-6-isopropyl-2 [methyl(methylsulfonyl)amino] pyrimidin-5-yl](3R,5S) -3,5-dihydroxyhept-6-enoic acid] calcium salt with the following structural formula. The empirical formula for rosuvastatin calcium USP is (C 22H 27FN 3O 6S) 2Ca and the molecular weight is 1001.14. Rosuvastatin calcium is a white amorphous powder that is sparingly soluble in water and methanol, and slightly soluble in ethanol. Rosuvastatin calcium is a hydrophilic compound with a partition coefficient (octanol/water) of 0.13 at pH of 7.0. Rosuvastatin tablets for oral use contain rosuvastatin 5 mg, 10 mg, 20 mg, or 40 mg (equivalent to 5.2 mg, 10.4 mg, 20.8 mg, and 41.6 mg rosuvastatin calcium) and the following inactive ingredients: Each tablet contains: crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, titanium dioxide and triacetin. Additionally, the 5 mg tablet contains ferric oxide yellow and the 10 mg, 20 mg and 40 mg tablets contain ferric oxide red.</Description>
</NDC>
<NDC>
<NDCCode>31722-182-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (31722-182-05) </PackageDescription>
<NDC11Code>31722-0182-05</NDC11Code>
<ProductNDC>31722-182</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Topiramate</ProprietaryName>
<NonProprietaryName>Topiramate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210922</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215414</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>TOPIRAMATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210922</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Topiramate is a sulfamate-substituted monosaccharide. Topiramate tablets, USP are available as 25 mg, 50 mg, 100 mg, and 200 mg round tablets for oral administration. Topiramate is a white crystalline powder with a bitter taste. Topiramate is most soluble in alkaline solutions containing sodium hydroxide or sodium phosphate and having a pH of 9 to 10. It is freely soluble in acetone, chloroform, dimethylsulfoxide, and ethanol. The solubility in water is 9.8 mg/mL. Its saturated solution has a pH of 6.3. Topiramate has the molecular formula C12H21NO8S and a molecular weight of 339.36. Topiramate is designated chemically as 2,3:4,5-Di-O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula. Topiramate tablets contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pre-gelatinized starch, hypromellose, sodium starch glycolate, magnesium stearate, titanium dioxide, polyethylene glycol. The 25 mg strength also contains polysorbate. The 50 mg strength also contains polysorbate, iron oxide yellow and iron oxide red. The 100 mg strength also contains polysorbate and iron oxide yellow. The 200 mg strength also contains iron oxide red. FDA approved tests Assay and related compounds differ from USP.FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>43598-182-05</NDCCode>
<PackageDescription>5 BAG in 1 CARTON (43598-182-05) / 250 mL in 1 BAG (43598-182-50) </PackageDescription>
<NDC11Code>43598-0182-05</NDC11Code>
<ProductNDC>43598-182</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenylephrine Hydrochloride Injection, Solution</ProprietaryName>
<NonProprietaryName>Phenylephrine Hydrochloride Injection, Solution</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250701</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA216830</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
<SubstanceName>PHENYLEPHRINE</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phenylephrine Hydrochloride in 0.9% Sodium Chloride Injection is indicated for increasing blood pressure in adults with clinically important hypotension resulting primarily from vasodilation in the setting of anesthesia.</IndicationAndUsage>
<Description>Phenylephrine Hydrochloride in 0.9% Sodium Chloride Injection, 80 mcg/mL (20 mg/250 mL), an alpha-1 adrenergic receptor agonist, contains the active pharmaceutical ingredient phenylephrine in the form of hydrochloride salt. Phenylephrine is a synthetic sympathomimetic agent in sterile form for parenteral injection. Phenylephrine hydrochloride chemical name is (-)-m-Hydroxy-α-[(methylamino) methyl]benzyl alcohol hydrochloride and has the following structural formula. Phenylephrine hydrochloride is very soluble in water, freely soluble in ethanol, and insoluble in chloroform and ethyl ether. Phenylephrine hydrochloride is sensitive to light. Phenylephrine Hydrochloride Injection, USP 80 mcg/mL (20 mg/250 mL, equivalent to 16.4 mg of phenylephrine base per 250 ml) is a clear and colorless sterile aqueous solution, essentially free of visible foreign matter. It is a ready-to-use solution intended for intravenous administration. Each mL contains: 0.08 mg of Phenylephrine Hydrochloride and 9.04 mg of Sodium Chloride in Water for Injection. Phenylephrine Hydrochloride Injection, USP 80 mcg/mL. Hydrochloric acid is added as needed to adjust pH (pH range is 3.0 to 5.0).</Description>
</NDC>
<NDC>
<NDCCode>49967-182-05</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (49967-182-05) / 20 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>49967-0182-05</NDC11Code>
<ProductNDC>49967-182</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Giorgio Armani Designer Lift Smoothing Firming Foundation Broad Spectrum Spf 20 Sunscreen</ProprietaryName>
<NonProprietaryName>Octinoxate And Titanium Dioxide</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20060801</StartMarketingDate>
<EndMarketingDate>20231001</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>L'Oreal USA Products Inc</LabelerName>
<SubstanceName>OCTINOXATE; TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>75; 19</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-10-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20060801</StartMarketingDatePackage>
<EndMarketingDatePackage>20231001</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>55111-182-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (55111-182-05) </PackageDescription>
<NDC11Code>55111-0182-05</NDC11Code>
<ProductNDC>55111-182</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levetiracetam</ProprietaryName>
<NonProprietaryName>Levetiracetam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076920</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Limited</LabelerName>
<SubstanceName>LEVETIRACETAM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2018-12-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Levetiracetam USP is an antiepileptic drug available as beige colored tablets in 250 mg, 500 mg and 750 mg strengths for oral administration. The chemical name of levetiracetam USP, a single enantiomer, is (-)-(S)-a-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam USP is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam USP is a white to off-white crystalline powder. It is very soluble in water, freely soluble in methanol, chloroform and ethanol. Soluble in acetonitrile and practically insoluble in n-hexane. Levetiracetam tablets USP contain the labeled amount of levetiracetam USP. Inactive ingredients: colloidal silicon dioxide, corn starch, magnesium stearate, microcrystalline cellulose, povidone, talc, sodium starch glycolate and coloring agent contains hypromellose 3cp, hypromellose 6cp, iron oxide yellow, iron oxide red, polyethylene glycol 400, polysorbate 80 and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>55312-182-05</NDCCode>
<PackageDescription>181.4 g in 1 TUBE (55312-182-05)</PackageDescription>
<NDC11Code>55312-0182-05</NDC11Code>
<ProductNDC>55312-182</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Western Family Whitening Plus Minty Fresh Mouthwash Anticavity</ProprietaryName>
<NonProprietaryName>Sodium Fluoride</NonProprietaryName>
<DosageFormName>PASTE, DENTIFRICE</DosageFormName>
<RouteName>DENTAL</RouteName>
<StartMarketingDate>20081124</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part355</ApplicationNumber>
<LabelerName>Western Family Foods, Inc</LabelerName>
<SubstanceName>SODIUM FLUORIDE</SubstanceName>
<StrengthNumber>2.43</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Helps protect against cavities.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>59735-182-06</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (59735-182-06) / 30 mL in 1 TUBE (59735-182-05) </PackageDescription>
<NDC11Code>59735-0182-06</NDC11Code>
<ProductNDC>59735-182</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Your Name Mineral Sheertint Broad Spectrum Spf 20- Sun Glow</ProprietaryName>
<NonProprietaryName>Your Name Mineral Sheer Tint</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20110201</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>Mana Product, Inc</LabelerName>
<SubstanceName>TITANIUM DIOXIDE; ZINC OXIDE</SubstanceName>
<StrengthNumber>5; 5</StrengthNumber>
<StrengthUnit>g/30mL; g/30mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Stop use and ask a doctor if rash occurs.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>60429-182-05</NDCCode>
<PackageDescription>500 CAPSULE, DELAYED RELEASE in 1 BOTTLE (60429-182-05)</PackageDescription>
<NDC11Code>60429-0182-05</NDC11Code>
<ProductNDC>60429-182</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omeprazole</ProprietaryName>
<NonProprietaryName>Omeprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150106</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076048</ApplicationNumber>
<LabelerName>Golden State Medical Supply, Inc</LabelerName>
<SubstanceName>OMEPRAZOLE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC],Proton Pump Inhibitors [MoA],Cytochrome P450 2C19 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-10-26</LastUpdate>
</NDC>
<NDC>
<NDCCode>68382-182-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (68382-182-05) </PackageDescription>
<NDC11Code>68382-0182-05</NDC11Code>
<ProductNDC>68382-182</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buspirone Hydrochloride</ProprietaryName>
<NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140503</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078888</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140503</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone hydrochloride tablets have been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone hydrochloride tablets relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, III1 as follows:. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories. 1. Motor tension:. Shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle. 2. Autonomic hyperactivity:. Sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate. 3. Apprehensive expectation:. Anxiety, worry, fear, rumination, and anticipation of misfortune to self or others. 4. Vigilance and scanning:. Hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling "on edge," irritability, impatience. The above symptoms would not be due to another mental disorder, such as a depressive disorder or schizophrenia. However, mild depressive symptoms are common in GAD. The effectiveness of buspirone hydrochloride tablets in long-term use, that is, for more than 3 to 4 weeks, has not been demonstrated in controlled trials. There is no body of evidence available that systematically addresses the appropriate duration of treatment for GAD. However, in a study of long-term use, 264 patients were treated with buspirone hydrochloride tablets for 1 year without ill effect. Therefore, the physician who elects to use buspirone hydrochloride tablets for extended periods should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Buspirone hydrochloride tablets, USP are an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride, USP is a white crystalline powder. It is very soluble in water; freely soluble in methanol and in methylene chloride; sparingly soluble in ethanol and in acetonitrile; very slightly soluble in ethyl acetate and practically insoluble in hexanes. Its molecular weight is 422. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]butyl]-8-azaspiro[4.5]decane-7,9-dione monohydrochloride. The molecular formula C21H31N5O2HCl is represented by the following structural formula. Each buspirone hydrochloride tablet intended for oral administration contains 5 mg or 7.5 mg or 10 mg or 15 mg or 30 mg buspirone hydrochloride (equivalent to 4.6 mg, 6.85 mg, 9.1 mg, 13.7 mg, and 27.4 mg of buspirone free base, respectively). In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate. The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg and 30 mg tablets are scored so they can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). A single 30 mg tablet can provide the following doses: 30 mg (entire tablet), 20 mg (two thirds of a tablet), 15 mg (one half of a tablet), or 10 mg (one third of a tablet).</Description>
</NDC>
<NDC>
<NDCCode>68428-182-05</NDCCode>
<PackageDescription>150 PELLET in 1 VIAL, GLASS (68428-182-05) </PackageDescription>
<NDC11Code>68428-0182-05</NDC11Code>
<ProductNDC>68428-182</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Aesculus Hippocastanum</ProprietaryName>
<NonProprietaryName>Horse Chestnut</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110126</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>HORSE CHESTNUT</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110126</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Indications. AESCULUS HIPP Hemorrhoids.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>68828-182-06</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (68828-182-06) > 2 mL in 1 TUBE (68828-182-05) </PackageDescription>
<NDC11Code>68828-0182-06</NDC11Code>
<ProductNDC>68828-182</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Balancing Day Moisture Broad Spectrum Spf 15</ProprietaryName>
<ProprietaryNameSuffix>Jafra</ProprietaryNameSuffix>
<NonProprietaryName>Avobenzone,octinoxate, Octisalate, Octisalate, Oxybenzone</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20131028</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Jafra Cosmetics International Inc</LabelerName>
<SubstanceName>AVOBENZONE; OCTINOXATE; OCTISALATE; OXYBENZONE</SubstanceName>
<StrengthNumber>2.75; 7.5; 5; 2</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131028</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>69315-182-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (69315-182-05) </PackageDescription>
<NDC11Code>69315-0182-05</NDC11Code>
<ProductNDC>69315-182</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxybutynin Chloride</ProprietaryName>
<NonProprietaryName>Oxybutynin Chloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212798</ApplicationNumber>
<LabelerName>Leading Pharma, LLC</LabelerName>
<SubstanceName>OXYBUTYNIN CHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-02-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxybutynin chloride is indicated for the relief of symptoms of bladder instability associated with voiding in patients with uninhibited neurogenic or reflex neurogenic bladder (i.e., urgency, frequency, urinary leakage, urge incontinence, dysuria).</IndicationAndUsage>
<Description>Each scored round, uncoated, oxybutynin chloride tablet contains 5 mg of oxybutynin chloride, USP. Chemically, oxybutynin chloride is 4(diethylamino-but-2-ynyl (RS) 2-cyclohexyl-2-hydroxy 2 phenyl acetate hydrochloride. The empirical formula of oxybutynin chloride is C22H31NO3HCl. The structural formula appears below. Oxybutynin Chloride is a white crystalline, practically odorless powder with a molecular weight of 393.95. It is freely soluble in water and in alcohol; very soluble in methanol and in chloroform; soluble in acetone; slightly soluble in ether; very slightly soluble in hexane. Oxybutynin Chloride Tablets, USP also contain magnesium stearate, microcrystalline cellulose, and pregelatinized starch. Oxybutynin Chloride Tablets, USP are for oral administration. Therapeutic Category: Antispasmodic, anticholinergic. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
</NDCList>