RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>71288-202-02</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (71288-202-02)  / 2 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>71288-0202-02</NDC11Code>
    <ProductNDC>71288-202</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sodium Nitroprusside</ProprietaryName>
    <NonProprietaryName>Sodium Nitroprusside</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20191206</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211016</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>SODIUM NITROPRUSSIDE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/2mL</StrengthUnit>
    <Pharm_Classes>Vasodilation [PE], Vasodilator [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-12-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191206</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sodium nitroprusside is indicated for the immediate reduction of blood pressure of adult and pediatric patients in hypertensive crises. Concomitant longer-acting antihypertensive medication should be administered so that the duration of treatment with sodium nitroprusside can be minimized. Sodium nitroprusside is also indicated for producing controlled hypotension in order to reduce bleeding during surgery. Sodium nitroprusside is also indicated for the treatment of acute congestive heart failure.</IndicationAndUsage>
    <Description>Sodium nitroprusside is disodium pentacyanonitrosylferrate (2-) dihydrate, a hypotensive agent whose structural formula is. whose molecular formula is Na2[Fe(CN)5NO]  2H2O, and whose molecular weight is 297.95. Dry sodium nitroprusside is a reddish-brown powder, soluble in water. In an aqueous solution infused intravenously, sodium nitroprusside is a rapid-acting vasodilator, active on both arteries and veins. Sodium nitroprusside solution is rapidly degraded by trace contaminants, often with resulting color changes. (See DOSAGE AND ADMINISTRATION section.) The solution is also sensitive to certain wavelengths of light, and it must be protected from light in clinical use. Sodium nitroprusside injection is available as. 50 mg Fliptop Vial – Each 2 mL vial contains the equivalent of 50 mg sodium nitroprusside dihydrate in sterile water for injection.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-129-02</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (71288-129-02)  &gt; 1 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>71288-0129-02</NDC11Code>
    <ProductNDC>71288-129</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dactinomycin</ProprietaryName>
    <NonProprietaryName>Dactinomycin</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20201113</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213463</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>DACTINOMYCIN</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Actinomycin [EPC], Nucleic Acid Synthesis Inhibitors [MoA], Protein Synthesis Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2020-11-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201113</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Dactinomycin for Injection is an actinomycin indicated for the treatment of: : 1 adult and pediatric patients with Wilms tumor, as part of a multi-phase, combination chemotherapy regimen. (1.1) , 2 adult and pediatric patients with rhabdomyosarcoma, as part of a multi-phase, combination chemotherapy regimen. (1.2) , 3 adult and pediatric patients with Ewing sarcoma, as part of a multi-phase, combination chemotherapy regimen. (1.3) , 4 adult and pediatric patients with metastatic, nonseminomatous testicular cancer, as part of a multi-phase, combination chemotherapy regimen. (1.4) , 5 post-menarchal patients with gestational trophoblastic neoplasia, as a single agent or as part of a combination chemotherapy regimen. (1.5) , 6 adult patients with locally recurrent or locoregional solid malignancies, as a component of palliative or adjunctive regional perfusion. (1.6) .</IndicationAndUsage>
    <Description>Dactinomycin is an actinomycin. Dactinomycin is produced by Streptomyces parvullus. The chemical name is 8-amino-N-(2-amino-4,6-dimethyl-3-oxo-phenoxazin-1-yl)carbonyl-N'-[8-amino-4,6-dimethyl-7-oxo-9-[[3,6,10-trimethyl-7,14-bis(1-methylethyl)-2,5,8,12,15-pentaoxo-9-oxa-3,6,13,16-tetrazabicyclo[14.3.0]nonadec-11-yl]carbamoyl]phenoxazin-1-yl]carbonyl-4,6-dimethyl-7-oxo-N,N'-bis[3,6,10-trimethyl-7,14-bis(1-methylethyl)-2,5,8,12,15-pentaoxo-9-oxa-3,6,13,16 tetrazabicyclo[14.3.0]nonadec-11-yl]-1,9-bis[[3,6,10-trimethyl-7,14-bis(1-methylethyl)-2,5,8,12,15-pentaoxo-9-oxa-3,6,13,16-tetrazabicyclo[14.3.0] nonadec-11-yl]carbamoyl]phenoxazine-1,9-dicarboxamide. The molecular formula is C62H86N12O16 and the molecular weight is 1255.42 daltons. The structural formula of dactinomycin is shown below:. Dactinomycin for Injection, USP for intravenous use is a sterile, amorphous yellow to orange, lyophilized powder in a single-dose vial. Each vial contains 500 mcg of dactinomycin and 20 mg of mannitol.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-143-02</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (71288-143-02)  &gt; 2 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>71288-0143-02</NDC11Code>
    <ProductNDC>71288-143</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Docetaxel Anhydrous</ProprietaryName>
    <NonProprietaryName>Docetaxel Anhydrous</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20180824</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209634</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc</LabelerName>
    <SubstanceName>DOCETAXEL ANHYDROUS</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/2mL</StrengthUnit>
    <Pharm_Classes>Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2022-05-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180824</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>71288-203-03</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (71288-203-03)  / 2 mL in 1 VIAL, SINGLE-DOSE (71288-203-02) </PackageDescription>
    <NDC11Code>71288-0203-03</NDC11Code>
    <ProductNDC>71288-203</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Furosemide</ProprietaryName>
    <NonProprietaryName>Furosemide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20220127</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212803</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>FUROSEMIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220127</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Parenteral therapy should be reserved for patients unable to take oral medication or for patients in emergency clinical situations.</IndicationAndUsage>
    <Description>Furosemide is a diuretic which is an anthranilic acid derivative. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide Injection, USP 10 mg per mL is a sterile, nonpyrogenic solution in vials for intravenous and intramuscular injection. Furosemide is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, sparingly soluble in alcohol, freely soluble in dilute alkali solutions and insoluble in dilute acids. The structural formula is as follows. Each mL contains: Furosemide 10 mg, Water for Injection q.s., Sodium Chloride for isotonicity, Sodium Hydroxide and, if necessary, Hydrochloric Acid to adjust pH between 8.0 and 9.3.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-205-02</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (71288-205-02)  / 1 mL in 1 VIAL, SINGLE-DOSE (71288-205-01) </PackageDescription>
    <NDC11Code>71288-0205-02</NDC11Code>
    <ProductNDC>71288-205</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hydralazine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Hydralazine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20250602</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217501</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>HYDRALAZINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250602</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Severe essential hypertension when the drug cannot be given orally or when there is an urgent need to lower blood pressure.</IndicationAndUsage>
    <Description>Hydralazine Hydrochloride Injection, USP is an antihypertensive available in a 1 mL vial for intravenous andintramuscular administration. Hydralazine Hydrochloride Injection, USP is a sterile, nonpyrogenic colorless solution. Each mL contains. Active: Hydralazine Hydrochloride, USP, 20 mgPreservatives: Methylparaben, NF, 0.65 mg; Propylparaben, NF, 0.35 mgInactives: Propylene Glycol, USP, 103.6 mg; Sodium Hydroxide and/or Hydrochloric Acid to adjust pH (3.4 to 4.4)and Water for Injection. Hydralazine Hydrochloride, USP is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. Molecular Formula C8H8N4HCl. Hydralazine Hydrochloride, USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightlysoluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition, and has a molecularweight of 196.64.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-206-02</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (71288-206-02)  / 1 mL in 1 VIAL, SINGLE-USE (71288-206-01) </PackageDescription>
    <NDC11Code>71288-0206-02</NDC11Code>
    <ProductNDC>71288-206</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Alprostadil</ProprietaryName>
    <NonProprietaryName>Alprostadil</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
    <RouteName>INTRAVASCULAR</RouteName>
    <StartMarketingDate>20240915</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075196</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>ALPROSTADIL</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>ug/mL</StrengthUnit>
    <Pharm_Classes>Genitourinary Arterial Vasodilation [PE], Prostaglandin Analog [EPC], Prostaglandin E1 Agonist [EPC], Prostaglandin Receptor Agonists [MoA], Prostaglandins [CS], Venous Vasodilation [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-09-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240915</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Alprostadil injection, USP is indicated for palliative, not definitive, therapy to temporarily maintain the patency of the ductus arteriosus until corrective or palliative surgery can be performed in neonates who have congenital heart defects and who depend upon the patent ductus for survival. Such congenital heart defects include pulmonary atresia, pulmonary stenosis, tricuspid atresia, tetralogy of Fallot, interruption of the aortic arch, coarctation of the aorta, or transposition of the great vessels with or without other defects. In infants with restricted pulmonary blood flow, the increase in blood oxygenation is inversely proportional to pretreatment pO2 values; that is, patients with low pO2 values respond best, and patients with pO2 values of 40 torr or more usually have little response. Alprostadil injection, USP should be administered only by trained personnel in facilities that provide pediatric intensive care.</IndicationAndUsage>
    <Description>Alprostadil injection, USP for intravascular infusion contains 500 micrograms alprostadil, more commonly known as prostaglandin E1, in 1 mL dehydrated alcohol. The chemical name for alprostadil is (1R,2R,3R)-3-Hydroxy-2-[(E)-(3S)-3-hydroxy-1-octenyl]-5-oxocyclopentane heptanoic acid, and the molecular weight is 354.49. Alprostadil is a white to off-white crystalline powder with a melting point between 110° and 116°C. Its solubility at 35°C is 8000 micrograms per 100 mL double distilled water. Alprostadil has a molecular formula of C20H34O5.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-300-02</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 CARTON (71288-300-02)  / 1 mL in 1 VIAL, MULTI-DOSE (71288-300-01) </PackageDescription>
    <NDC11Code>71288-0300-02</NDC11Code>
    <ProductNDC>71288-300</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cyanocobalamin</ProprietaryName>
    <NonProprietaryName>Cyanocobalamin</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20241115</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214316</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>CYANOCOBALAMIN</SubstanceName>
    <StrengthNumber>1000</StrengthNumber>
    <StrengthUnit>ug/mL</StrengthUnit>
    <Pharm_Classes>Vitamin B 12 [CS], Vitamin B12 [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-11-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241115</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cyanocobalamin is indicated for vitamin B12 deficiencies due to malabsorption which may be associated with the following conditions.           Addisonian (pernicious) anemia          Gastrointestinal pathology, dysfunction, or surgery, including gluten enteropathy or sprue, small bowel bacteria overgrowth, total or partial gastrectomy          Fish tapeworm infestation          Malignancy of pancreas or bowel          Folic acid deficiency. It may be possible to treat the underlying disease by surgical correction of anatomic lesions leading to small bowel bacterial overgrowth, expulsion of fish tapeworm, discontinuation of drugs leading to vitamin malabsorption (see Drug/Laboratory Test Interactions), use of a gluten-free diet in nontropical sprue, or administration of antibiotics in tropical sprue. Such measures remove the need for long-term administration of cyanocobalamin. Requirements of vitamin B12 in excess of normal (due to pregnancy, thyrotoxicosis, hemolytic anemia, hemorrhage, malignancy, hepatic and renal disease) can usually be met with oral supplementation. Cyanocobalamin Injection is also suitable for the vitamin B12 absorption test (Schilling Test).</IndicationAndUsage>
    <Description>Cyanocobalamin Injection, USP is a sterile solution of cyanocobalamin for intramuscular or subcutaneous injection. Each mL contains 1,000 mcg cyanocobalamin. Each vial also contains Sodium Chloride, 0.9%. Benzyl Alcohol, 1.5%, is present as a preservative. Hydrochloric acid and/or sodium hydroxide may have been added during manufacture to adjust the pH (range 4.5 to 7.0). Cyanocobalamin appears as dark red crystals or as an amorphous or crystalline red powder. It is very hygroscopic in the anhydrous form, and sparingly soluble in water (1:80). It is stable to autoclaving for short periods at 121°C. The vitamin B12 coenzymes are very unstable in light. The chemical name is 5,6-dimethyl-benzimidazolyl cyanocobamide; the molecular formula is C63H88CoN14O14P. The cobalt content is 4.34%. The molecular weight is 1355.39. The structural formula is represented below.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-303-02</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 CARTON (71288-303-02)  &gt; 1 mL in 1 VIAL, MULTI-DOSE (71288-303-01) </PackageDescription>
    <NDC11Code>71288-0303-02</NDC11Code>
    <ProductNDC>71288-303</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cyanocobalamin</ProprietaryName>
    <NonProprietaryName>Cyanocobalamin</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20200924</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214390</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>CYANOCOBALAMIN</SubstanceName>
    <StrengthNumber>1000</StrengthNumber>
    <StrengthUnit>ug/mL</StrengthUnit>
    <Pharm_Classes>Vitamin B 12 [CS], Vitamin B12 [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-05-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200924</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cyanocobalamin is indicated for vitamin B12 deficiencies due to malabsorption which may be associated with the following conditions. It may be possible to treat the underlying disease by surgical correction of anatomic lesions leading to small bowel bacterial overgrowth, expulsion of fish tapeworm, discontinuation of drugs leading to vitamin malabsorption (see Drug Interactions), use of a gluten-free diet in nontropical sprue, or administration of antibiotics in tropical sprue. Such measures remove the need for long-term administration of cyanocobalamin. Requirements of vitamin B12 in excess of normal (due to pregnancy, thyrotoxicosis, hemolytic anemia, hemorrhage, malignancy, hepatic and renal disease) can usually be met with oral supplementation. Cyanocobalamin Injection, USP is also suitable for the vitamin B12 absorption test (Schilling test).</IndicationAndUsage>
    <Description>Cyanocobalamin Injection, USP is a sterile solution of cyanocobalamin for intramuscular or subcutaneous injection. Each mL contains 1,000 mcg cyanocobalamin. Each vial also contains Sodium Chloride, 0.9%. Benzyl Alcohol, 1.5%, is present as a preservative. Hydrochloric acid and/or sodium hydroxide may have been added during manufacture to adjust the pH (range 4.5-7.0). Cyanocobalamin appears as dark red crystals or as an amorphous or crystalline red powder. It is very hygroscopic in the anhydrous form, and sparingly soluble in water (1:80). It is stable to autoclaving for short periods at 121°C. The vitamin B12 coenzymes are very unstable in light. The chemical name is 5,6-dimethyl-benzimidazolyl cyanocobamide; the molecular formula is C63H88CoN14O14P. The cobalt content is 4.34%. The molecular weight is 1355.39. The structural formula is represented below.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-400-03</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (71288-400-03)  / 2 mL in 1 VIAL, SINGLE-DOSE (71288-400-02) </PackageDescription>
    <NDC11Code>71288-0400-03</NDC11Code>
    <ProductNDC>71288-400</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Heparin Sodium</ProprietaryName>
    <NonProprietaryName>Heparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20190615</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211005</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>HEPARIN SODIUM</SubstanceName>
    <StrengthNumber>2000</StrengthNumber>
    <StrengthUnit>[USP'U]/2mL</StrengthUnit>
    <Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-04-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190615</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Heparin Sodium Injection is indicated for: : 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism; , 2 Prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease; , 3 Atrial fibrillation with embolization; , 4 Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation); , 5 Prevention of clotting in arterial and cardiac surgery; , 6 Prophylaxis and treatment of peripheral arterial embolism. , 7 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures. .</IndicationAndUsage>
    <Description>Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2-sulfamino-α-D-glucose 6-sulfate, (3) ß-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D-glucose and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2)&gt; (1)&gt; (4)&gt; (3)&gt; (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity, in water for injection. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Structure of Heparin Sodium (representative subunits).</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-401-02</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 CARTON (71288-401-02)  / 1 mL in 1 VIAL, MULTI-DOSE (71288-401-01) </PackageDescription>
    <NDC11Code>71288-0401-02</NDC11Code>
    <ProductNDC>71288-401</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Heparin Sodium</ProprietaryName>
    <NonProprietaryName>Heparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20200224</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211004</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>HEPARIN SODIUM</SubstanceName>
    <StrengthNumber>20000</StrengthNumber>
    <StrengthUnit>[USP'U]/mL</StrengthUnit>
    <Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-02-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200224</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Heparin Sodium Injection is indicated for: : 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism; , 2 Prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease; , 3 Atrial fibrillation with embolization; , 4 Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation); , 5 Prevention of clotting in arterial and cardiac surgery; , 6 Prophylaxis and treatment of peripheral arterial embolism. , 7 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures. .</IndicationAndUsage>
    <Description>Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2-sulfamino-α-D-glucose 6-sulfate, (3) β-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D-glucose and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2)&gt; (1)&gt; (4)&gt; (3)&gt; (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity, in water for injection. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Structure of Heparin Sodium (representative subunits).</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-402-02</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (71288-402-02)  / 1 mL in 1 VIAL, SINGLE-DOSE (71288-402-01) </PackageDescription>
    <NDC11Code>71288-0402-02</NDC11Code>
    <ProductNDC>71288-402</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Heparin Sodium</ProprietaryName>
    <NonProprietaryName>Heparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20190615</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211007</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>HEPARIN SODIUM</SubstanceName>
    <StrengthNumber>1000</StrengthNumber>
    <StrengthUnit>[USP'U]/mL</StrengthUnit>
    <Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190615</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Heparin Sodium Injection is indicated for: 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism;, 2 Prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease;, 3 Atrial fibrillation with embolization;, 4 Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);, 5 Prevention of clotting in arterial and cardiac surgery;, 6 Prophylaxis and treatment of peripheral arterial embolism., 7 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures.</IndicationAndUsage>
    <Description>Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, possessing anticoagulant properties. It is composed of polymers of alternating derivations of α-D-glucosamido (N-sulfated O-sulfated or N-acetylated) and O-sulfated uronic acid (α-L-iduronic acid or β-D-glucoronic acid). Structure of heparin sodium (representative subunits). Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Heparin Sodium Injection, USP preserved with Benzyl Alcohol is available in the following concentrations per mL. pH 5.0-7.5; sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-403-02</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (71288-403-02)  / 1 mL in 1 VIAL, SINGLE-DOSE (71288-403-01) </PackageDescription>
    <NDC11Code>71288-0403-02</NDC11Code>
    <ProductNDC>71288-403</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Heparin Sodium</ProprietaryName>
    <NonProprietaryName>Heparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20190615</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211007</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>HEPARIN SODIUM</SubstanceName>
    <StrengthNumber>5000</StrengthNumber>
    <StrengthUnit>[USP'U]/mL</StrengthUnit>
    <Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190615</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Heparin Sodium Injection is indicated for: 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism;, 2 Prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease;, 3 Atrial fibrillation with embolization;, 4 Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);, 5 Prevention of clotting in arterial and cardiac surgery;, 6 Prophylaxis and treatment of peripheral arterial embolism., 7 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures.</IndicationAndUsage>
    <Description>Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, possessing anticoagulant properties. It is composed of polymers of alternating derivations of α-D-glucosamido (N-sulfated O-sulfated or N-acetylated) and O-sulfated uronic acid (α-L-iduronic acid or β-D-glucoronic acid). Structure of heparin sodium (representative subunits). Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Heparin Sodium Injection, USP preserved with Benzyl Alcohol is available in the following concentrations per mL. pH 5.0-7.5; sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-404-02</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (71288-404-02)  / 1 mL in 1 VIAL, SINGLE-DOSE (71288-404-01) </PackageDescription>
    <NDC11Code>71288-0404-02</NDC11Code>
    <ProductNDC>71288-404</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Heparin Sodium</ProprietaryName>
    <NonProprietaryName>Heparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20190615</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211007</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>HEPARIN SODIUM</SubstanceName>
    <StrengthNumber>10000</StrengthNumber>
    <StrengthUnit>[USP'U]/mL</StrengthUnit>
    <Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190615</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Heparin Sodium Injection is indicated for: 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism;, 2 Prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease;, 3 Atrial fibrillation with embolization;, 4 Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);, 5 Prevention of clotting in arterial and cardiac surgery;, 6 Prophylaxis and treatment of peripheral arterial embolism., 7 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures.</IndicationAndUsage>
    <Description>Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, possessing anticoagulant properties. It is composed of polymers of alternating derivations of α-D-glucosamido (N-sulfated O-sulfated or N-acetylated) and O-sulfated uronic acid (α-L-iduronic acid or β-D-glucoronic acid). Structure of heparin sodium (representative subunits). Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Heparin Sodium Injection, USP preserved with Benzyl Alcohol is available in the following concentrations per mL. pH 5.0-7.5; sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-407-04</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (71288-407-04)  &gt; 2 mL in 1 VIAL, SINGLE-DOSE (71288-407-02) </PackageDescription>
    <NDC11Code>71288-0407-04</NDC11Code>
    <ProductNDC>71288-407</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glycopyrrolate</ProprietaryName>
    <NonProprietaryName>Glycopyrrolate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20190515</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211705</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>GLYCOPYRROLATE</SubstanceName>
    <StrengthNumber>.2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2023-10-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190515</StartMarketingDatePackage>
    <EndMarketingDatePackage>20231030</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Glycopyrrolate Injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, Glycopyrrolate Injection may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants.</IndicationAndUsage>
    <Description>Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains. Glycopyrrolate, USP 0.2 mg. Water for Injection, USP q.s. Benzyl Alcohol, NF 0.9% (preservative). pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.33. Its structural formula is as follows. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection, USP is a clear, colorless, sterile liquid; pH 2.0 – 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P = -1.52) at ambient room temperature (24°C).</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-414-04</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (71288-414-04)  / 2 mL in 1 VIAL, SINGLE-DOSE (71288-414-02) </PackageDescription>
    <NDC11Code>71288-0414-04</NDC11Code>
    <ProductNDC>71288-414</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glycopyrrolate</ProprietaryName>
    <NonProprietaryName>Glycopyrrolate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20210706</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212802</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>GLYCOPYRROLATE</SubstanceName>
    <StrengthNumber>.2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210706</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Glycopyrrolate Injection is an anticholinergic indicated. in anesthesia (adult and pediatric patients): 1 for reduction of salivary, tracheobronchial, and pharyngeal secretions, reduction of volume and acidity of gastric secretions, and blockade of cardiac inhibitory reflexes during induction of anesthesia and intubation., 2 intraoperatively to counteract surgically or drug-induced or vagal reflex-associated arrhythmias., 3 for protection against peripheral muscarinic effects of cholinergic agents. (1).</IndicationAndUsage>
    <Description>Glycopyrrolate is a synthetic anticholinergic agent. It is a quaternary ammonium salt with the following chemical name. 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.34. Its structural formula is as follows. C19H28BrNO3             398.34. Glycopyrrolate occurs as a white, odorless, crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. It is completely ionized at physiological pH values. Glycopyrrolate Injection, USP is a clear, colorless, sterile liquid with a pH of 2.0 to 3.0. The partition coefficient of glycopyrrolate in n-octanol/water system is 0.304 (log10 P = -1.52) at ambient room temperature (24°C). Glycopyrrolate Injection, USP is intended for intramuscular or intravenous administration. Each 1 mL contains 0.2 mg of glycopyrrolate, water for injection, and hydrochloric acid or sodium hydroxide as pH adjusters.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-440-02</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (71288-440-02)  / 1 mL in 1 VIAL (71288-440-01) </PackageDescription>
    <NDC11Code>71288-0440-02</NDC11Code>
    <ProductNDC>71288-440</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Desmopressin Acetate</ProprietaryName>
    <NonProprietaryName>Desmopressin Acetate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20260213</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074888</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>DESMOPRESSIN ACETATE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>ug/mL</StrengthUnit>
    <Pharm_Classes>Factor VIII Activator [EPC], Increased Coagulation Factor VIII Activity [PE], Increased Coagulation Factor VIII Concentration [PE], Vasopressin Analog [EPC], Vasopressins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260213</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Desmopressin Acetate Injection is a vasopressin analog used for: 1 Central Diabetes Insipidus - as antidiuretic replacement therapy in the management of central (cranial) diabetes insipidus and for the management of the temporary polyuria and polydipsia following head trauma or surgery in the pituitary region. (1.1), 2 Hemophilia A- for patients with factor VIII coagulant activity levels greater than 5% to maintain hemostasis during surgical procedures and postoperatively or reduce bleeding with episodes of spontaneous or traumatic injuries such as hemarthroses, intramuscular hematomas, or mucosal bleeding. (1.2), 3 von Willebrand’s disease (Type I) - for patients with mild to moderate disease with factor VIII levels greater than 5% to maintain hemostasis during surgical procedures or traumatic injuries such as hemarthroses, intramuscular hematomas, or mucosal bleeding. (1.3).</IndicationAndUsage>
    <Description>Desmopressin Acetate Injection, USP is a synthetic vasopressin analog for intravenous or subcutaneous use. It is chemically defined as follows. 1-(3-mercaptopropionic acid)-8-D-arginine vasopressin monoacetate (salt) trihydrate. Mol. Wt. 1183.34. Molecular Formula: C46H64N14O12S2C2H4O23H2O. Desmopressin Acetate Injection, USP is a clear, colorless sterile solution available in a 4 mcg per mL single-dose vial and a 40 mcg per 10 mL multiple-dose vial: Each mL contains 4 mcg of desmopressin acetate, USP which is equivalent to 3.6 mcg of desmopressin free base. The inactive ingredients in each mL are 9 mg sodium chloride (to adjust tonicity), 5 mg chlorobutanol, and q.s Water for Injection, USP. Hydrochloric acid is used to adjust pH to 3.5 to 5.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-449-02</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 CARTON (71288-449-02)  / 1 mL in 1 VIAL, MULTI-DOSE (71288-449-01) </PackageDescription>
    <NDC11Code>71288-0449-02</NDC11Code>
    <ProductNDC>71288-449</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Heparin Sodium</ProprietaryName>
    <NonProprietaryName>Heparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20250702</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211007</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>HEPARIN SODIUM</SubstanceName>
    <StrengthNumber>1000</StrengthNumber>
    <StrengthUnit>[USP'U]/mL</StrengthUnit>
    <Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250702</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Heparin Sodium Injection is indicated for: 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism;, 2 Prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease;, 3 Atrial fibrillation with embolization;, 4 Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);, 5 Prevention of clotting in arterial and cardiac surgery;, 6 Prophylaxis and treatment of peripheral arterial embolism., 7 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures.</IndicationAndUsage>
    <Description>Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, possessing anticoagulant properties. It is composed of polymers of alternating derivations of α-D-glucosamido (N-sulfated O-sulfated or N-acetylated) and O-sulfated uronic acid (α-L-iduronic acid or β-D-glucoronic acid). Structure of heparin sodium (representative subunits). Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Heparin Sodium Injection, USP preserved with Benzyl Alcohol is available in the following concentrations per mL. pH 5.0-7.5; sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-450-02</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 CARTON (71288-450-02)  / 1 mL in 1 VIAL, MULTI-DOSE (71288-450-01) </PackageDescription>
    <NDC11Code>71288-0450-02</NDC11Code>
    <ProductNDC>71288-450</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Heparin Sodium</ProprietaryName>
    <NonProprietaryName>Heparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20250702</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211007</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>HEPARIN SODIUM</SubstanceName>
    <StrengthNumber>5000</StrengthNumber>
    <StrengthUnit>[USP'U]/mL</StrengthUnit>
    <Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250702</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Heparin Sodium Injection is indicated for: 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism;, 2 Prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease;, 3 Atrial fibrillation with embolization;, 4 Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);, 5 Prevention of clotting in arterial and cardiac surgery;, 6 Prophylaxis and treatment of peripheral arterial embolism., 7 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures.</IndicationAndUsage>
    <Description>Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, possessing anticoagulant properties. It is composed of polymers of alternating derivations of α-D-glucosamido (N-sulfated O-sulfated or N-acetylated) and O-sulfated uronic acid (α-L-iduronic acid or β-D-glucoronic acid). Structure of heparin sodium (representative subunits). Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Heparin Sodium Injection, USP preserved with Benzyl Alcohol is available in the following concentrations per mL. pH 5.0-7.5; sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-451-02</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 CARTON (71288-451-02)  / 1 mL in 1 VIAL, MULTI-DOSE (71288-451-01) </PackageDescription>
    <NDC11Code>71288-0451-02</NDC11Code>
    <ProductNDC>71288-451</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Heparin Sodium</ProprietaryName>
    <NonProprietaryName>Heparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20250702</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211007</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>HEPARIN SODIUM</SubstanceName>
    <StrengthNumber>10000</StrengthNumber>
    <StrengthUnit>[USP'U]/mL</StrengthUnit>
    <Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250702</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Heparin Sodium Injection is indicated for: 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism;, 2 Prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease;, 3 Atrial fibrillation with embolization;, 4 Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);, 5 Prevention of clotting in arterial and cardiac surgery;, 6 Prophylaxis and treatment of peripheral arterial embolism., 7 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures.</IndicationAndUsage>
    <Description>Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, possessing anticoagulant properties. It is composed of polymers of alternating derivations of α-D-glucosamido (N-sulfated O-sulfated or N-acetylated) and O-sulfated uronic acid (α-L-iduronic acid or β-D-glucoronic acid). Structure of heparin sodium (representative subunits). Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Heparin Sodium Injection, USP preserved with Benzyl Alcohol is available in the following concentrations per mL. pH 5.0-7.5; sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-502-02</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (71288-502-02)  / 1 mL in 1 VIAL, SINGLE-DOSE (71288-502-01) </PackageDescription>
    <NDC11Code>71288-0502-02</NDC11Code>
    <ProductNDC>71288-502</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Haloperidol Decanoate</ProprietaryName>
    <NonProprietaryName>Haloperidol Decanoate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20210726</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214507</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>HALOPERIDOL DECANOATE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Typical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-05-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210726</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Haloperidol Decanoate  Injection is indicated for the treatment of schizophrenia in adults who were previously taking a stable dosage of an immediate-release oral haloperidol product.</IndicationAndUsage>
    <Description>Haloperidol Decanoate Injection is the decanoate ester of haloperidol, for intramuscular use. Haloperidol is a typical antipsychotic. The structural formula of haloperidol decanoate is 4-(4-chlorophenyl)-1-[4-(4-fluorophenyl)-4-oxobutyl] piperidin-4-yl decanoate. The molecular formula is C31H41CIFNO3 and has a molecular weight of 530.12. Haloperidol decanoate is almost insoluble in water (0.01 mg/mL) but is soluble in most organic solvents. Each mL of Haloperidol Decanoate Injection contains: 1 50 mg of haloperidol (present as 70.52 mg of haloperidol decanoate) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative., 2 100 mg of haloperidol (present as 141.04 mg of haloperidol decanoate) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-503-02</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (71288-503-02)  / 1 mL in 1 VIAL, SINGLE-DOSE (71288-503-01) </PackageDescription>
    <NDC11Code>71288-0503-02</NDC11Code>
    <ProductNDC>71288-503</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Haloperidol Decanoate</ProprietaryName>
    <NonProprietaryName>Haloperidol Decanoate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20210726</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214507</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>HALOPERIDOL DECANOATE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Typical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-05-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210726</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Haloperidol Decanoate  Injection is indicated for the treatment of schizophrenia in adults who were previously taking a stable dosage of an immediate-release oral haloperidol product.</IndicationAndUsage>
    <Description>Haloperidol Decanoate Injection is the decanoate ester of haloperidol, for intramuscular use. Haloperidol is a typical antipsychotic. The structural formula of haloperidol decanoate is 4-(4-chlorophenyl)-1-[4-(4-fluorophenyl)-4-oxobutyl] piperidin-4-yl decanoate. The molecular formula is C31H41CIFNO3 and has a molecular weight of 530.12. Haloperidol decanoate is almost insoluble in water (0.01 mg/mL) but is soluble in most organic solvents. Each mL of Haloperidol Decanoate Injection contains: 1 50 mg of haloperidol (present as 70.52 mg of haloperidol decanoate) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative., 2 100 mg of haloperidol (present as 141.04 mg of haloperidol decanoate) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-505-03</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (71288-505-03)  / 2 mL in 1 VIAL, SINGLE-DOSE (71288-505-02) </PackageDescription>
    <NDC11Code>71288-0505-03</NDC11Code>
    <ProductNDC>71288-505</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dexmedetomidine</ProprietaryName>
    <NonProprietaryName>Dexmedetomidine</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20190118</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204843</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>DEXMEDETOMIDINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>ug/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190118</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Dexmedetomidine Injection is a alpha2-adrenergic receptor agonist indicated for: 1 Sedation of initially intubated and mechanically ventilated adult patients during treatment in an intensive care setting. Administer Dexmedetomidine Injection by continuous infusion not to exceed 24 hours. (1.1), 2 Sedation of non-intubated adult patients prior to and/or during surgical and other procedures. (1.2).</IndicationAndUsage>
    <Description>Dexmedetomidine Injection, USP (100 mcg per mL) is a sterile, nonpyrogenic solution suitable for intravenous infusion following dilution. Dexmedetomidine Injection contains dexmedetomidine hydrochloride as the active pharmaceutical ingredient. Dexmedetomidine hydrochloride is a central alpha2-adrenergic agonist. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine. Dexmedetomidine hydrochloride chemical name is 1H-Imidazole, 4-[1-(2,3-dimethylphenyl)ethyl]-, monohydrochloride, (S). Dexmedetomidine hydrochloride has a molecular weight of 236.7 and the empirical formula is C13H16N2  HCl and the structural formula is. Dexmedetomidine hydrochloride is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine Injection, USP is intended to be used after dilution. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 7.0. Each mL contains 118 mcg of dexmedetomidine hydrochloride (equivalent to 100 mcg or 0.1 mg of dexmedetomidine) and 9 mg of sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-558-90</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (71288-558-90)  *  2 mL in 1 VIAL, SINGLE-DOSE (71288-556-02)  *  1 mL in 1 SYRINGE, GLASS (71288-557-81) </PackageDescription>
    <NDC11Code>71288-0558-90</NDC11Code>
    <ProductNDC>71288-558</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cetrorelix Acetate</ProprietaryName>
    <NonProprietaryName>Cetrorelix Acetate</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20240424</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214540</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2024-12-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240424</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cetrorelix Acetate for Injection is indicated for the inhibition of premature LH surges in women undergoing controlled ovarian stimulation.</IndicationAndUsage>
    <Description>Cetrorelix Acetate for Injection is a synthetic decapeptide with gonadotropin-releasing hormone (GnRH) antagonistic activity. Cetrorelix acetate is an analog of native GnRH with substitutions of amino acids at positions 1, 2, 3, 6, and 10. The molecular formula is Acetyl-D-3-(2′-naphtyl)-alanine-D-4-chlorophenylalanine-D-3-(3′-pyridyl)-alanine-L-serine-L-tyrosine-D-citruline-L-leucine-L-arginine-L-proline-D-alanine-amide, and the molecular weight is 1431.06, calculated as the anhydrous free base. The structural formula is as follows. Cetrorelix Acetate for Injection 0.25 mg is a sterile lyophilized powder intended for subcutaneous injection after reconstitution with Sterile Water for Injection, that comes supplied in a 1 mL prefilled syringe. Each vial of Cetrorelix Acetate for Injection 0.25 mg contains 0.26-0.27 mg cetrorelix acetate, equivalent to 0.25 mg cetrorelix, and 54.80 mg mannitol.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-566-02</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (71288-566-02)  / 1 mL in 1 VIAL, SINGLE-DOSE (71288-566-01) </PackageDescription>
    <NDC11Code>71288-0566-02</NDC11Code>
    <ProductNDC>71288-566</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Octreotide Acetate</ProprietaryName>
    <NonProprietaryName>Octreotide Acetate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20250228</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075957</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>OCTREOTIDE ACETATE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>ug/mL</StrengthUnit>
    <Pharm_Classes>Somatostatin Analog [EPC], Somatostatin Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-02-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250228</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Octreotide Acetate Injection is a somatostatin analogue indicated: 1 Acromegaly: To reduce blood levels of growth hormone (GH) and insulin growth factor-1 (IGF-1; somatomedin C) in acromegaly patients who have had inadequate response to or cannot be treated with surgical resection, pituitary irradiation, and bromocriptine mesylate at maximally tolerated doses. (1.1), 2 Carcinoid Tumors: For the symptomatic treatment of patients with metastatic carcinoid tumors where it suppresses or inhibits the severe diarrhea and flushing episodes associated with the disease. (1.2), 3 Vasoactive Intestinal Peptide Tumors (VIPomas): For the treatment of profuse watery diarrhea associated with VIP-secreting tumors. (1.3).</IndicationAndUsage>
    <Description>Octreotide Acetate Injection, a cyclic octapeptide prepared as a clear sterile solution of octreotide, acetate salt, in a buffered lactic acid solution for administration by deep subcutaneous or intravenous injection. Octreotide acetate, known chemically as L-Cysteinamide, D-phenylalanyl-L-cysteinyl-L-phenylalanyl-D-tryptophyl-L-lysyl-L-threonyl-N-[2-hydroxy-1-(hydroxymethyl)propyl]-,cyclic (2 → 7)-disulfide; [R-(R*, R*)] acetate salt, is a long-acting octapeptide with pharmacologic actions mimicking those of the natural hormone somatostatin. Octreotide Acetate Injection is available as sterile 1-mL vials in 3 strengths, containing 50 mcg, 100 mcg, or 500 mcg octreotide (as acetate). Each vial also contains glacial acetic acid, USP (2 mg), mannitol, USP (45 mg), sodium acetate trihydrate, USP (2 mg), water for injection, USP (quantity sufficient to 1 mL). Glacial acetic acid, USP and sodium acetate trihydrate, USP are added to provide a buffered solution, pH to 4.2 ± 0.5. The molecular weight of octreotide acetate is 1019.3 g/mol (free peptide, C49H66N10O10S2) and its amino acid sequence is.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-567-02</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (71288-567-02)  / 1 mL in 1 VIAL, SINGLE-DOSE (71288-567-01) </PackageDescription>
    <NDC11Code>71288-0567-02</NDC11Code>
    <ProductNDC>71288-567</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Octreotide Acetate</ProprietaryName>
    <NonProprietaryName>Octreotide Acetate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20250228</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075957</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>OCTREOTIDE ACETATE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>ug/mL</StrengthUnit>
    <Pharm_Classes>Somatostatin Analog [EPC], Somatostatin Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-02-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250228</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Octreotide Acetate Injection is a somatostatin analogue indicated: 1 Acromegaly: To reduce blood levels of growth hormone (GH) and insulin growth factor-1 (IGF-1; somatomedin C) in acromegaly patients who have had inadequate response to or cannot be treated with surgical resection, pituitary irradiation, and bromocriptine mesylate at maximally tolerated doses. (1.1), 2 Carcinoid Tumors: For the symptomatic treatment of patients with metastatic carcinoid tumors where it suppresses or inhibits the severe diarrhea and flushing episodes associated with the disease. (1.2), 3 Vasoactive Intestinal Peptide Tumors (VIPomas): For the treatment of profuse watery diarrhea associated with VIP-secreting tumors. (1.3).</IndicationAndUsage>
    <Description>Octreotide Acetate Injection, a cyclic octapeptide prepared as a clear sterile solution of octreotide, acetate salt, in a buffered lactic acid solution for administration by deep subcutaneous or intravenous injection. Octreotide acetate, known chemically as L-Cysteinamide, D-phenylalanyl-L-cysteinyl-L-phenylalanyl-D-tryptophyl-L-lysyl-L-threonyl-N-[2-hydroxy-1-(hydroxymethyl)propyl]-,cyclic (2 → 7)-disulfide; [R-(R*, R*)] acetate salt, is a long-acting octapeptide with pharmacologic actions mimicking those of the natural hormone somatostatin. Octreotide Acetate Injection is available as sterile 1-mL vials in 3 strengths, containing 50 mcg, 100 mcg, or 500 mcg octreotide (as acetate). Each vial also contains glacial acetic acid, USP (2 mg), mannitol, USP (45 mg), sodium acetate trihydrate, USP (2 mg), water for injection, USP (quantity sufficient to 1 mL). Glacial acetic acid, USP and sodium acetate trihydrate, USP are added to provide a buffered solution, pH to 4.2 ± 0.5. The molecular weight of octreotide acetate is 1019.3 g/mol (free peptide, C49H66N10O10S2) and its amino acid sequence is.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-568-02</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (71288-568-02)  / 1 mL in 1 VIAL, SINGLE-DOSE (71288-568-01) </PackageDescription>
    <NDC11Code>71288-0568-02</NDC11Code>
    <ProductNDC>71288-568</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Octreotide Acetate</ProprietaryName>
    <NonProprietaryName>Octreotide Acetate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20250228</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075957</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>OCTREOTIDE ACETATE</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>ug/mL</StrengthUnit>
    <Pharm_Classes>Somatostatin Analog [EPC], Somatostatin Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-02-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250228</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Octreotide Acetate Injection is a somatostatin analogue indicated: 1 Acromegaly: To reduce blood levels of growth hormone (GH) and insulin growth factor-1 (IGF-1; somatomedin C) in acromegaly patients who have had inadequate response to or cannot be treated with surgical resection, pituitary irradiation, and bromocriptine mesylate at maximally tolerated doses. (1.1), 2 Carcinoid Tumors: For the symptomatic treatment of patients with metastatic carcinoid tumors where it suppresses or inhibits the severe diarrhea and flushing episodes associated with the disease. (1.2), 3 Vasoactive Intestinal Peptide Tumors (VIPomas): For the treatment of profuse watery diarrhea associated with VIP-secreting tumors. (1.3).</IndicationAndUsage>
    <Description>Octreotide Acetate Injection, a cyclic octapeptide prepared as a clear sterile solution of octreotide, acetate salt, in a buffered lactic acid solution for administration by deep subcutaneous or intravenous injection. Octreotide acetate, known chemically as L-Cysteinamide, D-phenylalanyl-L-cysteinyl-L-phenylalanyl-D-tryptophyl-L-lysyl-L-threonyl-N-[2-hydroxy-1-(hydroxymethyl)propyl]-,cyclic (2 → 7)-disulfide; [R-(R*, R*)] acetate salt, is a long-acting octapeptide with pharmacologic actions mimicking those of the natural hormone somatostatin. Octreotide Acetate Injection is available as sterile 1-mL vials in 3 strengths, containing 50 mcg, 100 mcg, or 500 mcg octreotide (as acetate). Each vial also contains glacial acetic acid, USP (2 mg), mannitol, USP (45 mg), sodium acetate trihydrate, USP (2 mg), water for injection, USP (quantity sufficient to 1 mL). Glacial acetic acid, USP and sodium acetate trihydrate, USP are added to provide a buffered solution, pH to 4.2 ± 0.5. The molecular weight of octreotide acetate is 1019.3 g/mol (free peptide, C49H66N10O10S2) and its amino acid sequence is.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-802-03</NDCCode>
    <PackageDescription>50 VIAL, MULTI-DOSE in 1 CARTON (71288-802-03)  &gt; 2 mL in 1 VIAL, MULTI-DOSE (71288-802-02) </PackageDescription>
    <NDC11Code>71288-0802-03</NDC11Code>
    <ProductNDC>71288-802</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Doxercalciferol</ProprietaryName>
    <NonProprietaryName>Doxercalciferol</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20200211</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211670</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>DOXERCALCIFEROL</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>ug/2mL</StrengthUnit>
    <Pharm_Classes>Ergocalciferols [CS], Vitamin D2 Analog [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-08-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200211</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Doxercalciferol Injection is indicated for the treatment of secondary hyperparathyroidism in adult patients with CKD on dialysis.</IndicationAndUsage>
    <Description>Doxercalciferol Injection contains doxercalciferol, which is a synthetic vitamin D2 analog. Doxercalciferol undergoes metabolic activation in vivo to form 1α,25-dihydroxyvitamin D2 (1α,25-(OH)2D2), a naturally occurring, biologically active form of vitamin D2. Doxercalciferol is a colorless crystalline compound with a calculated molecular weight of 412.65 and a molecular formula of C28H44O2. It is soluble in oils and organic solvents, but is relatively insoluble in water. Chemically, doxercalciferol is (1α,3β,5Z,7E,22E)-9,10-secoergosta-5,7,10(19),22-tetraene-1,3-diol. The structural formula is:. Doxercalciferol Injection 2 mL multi-dose vials contain 4 mcg per 2 mL (2 mcg per mL) of doxercalciferol. Each milliliter (mL) of solution contains 2 mcg doxercalciferol and the following inactive ingredients: butylated hydroxytoluene, 20 mcg; edetate disodium, 1.1 mg; dehydrated alcohol, 59.25 mg; polysorbate 20, 10 mg; sodium chloride, 1.5 mg; disodium hydrogen phosphate, anhydrous, 7.63 mg; and monosodium phosphate monohydrate, 1.8 mg.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-802-04</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 CARTON (71288-802-04)  / 2 mL in 1 VIAL, MULTI-DOSE (71288-802-02) </PackageDescription>
    <NDC11Code>71288-0802-04</NDC11Code>
    <ProductNDC>71288-802</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Doxercalciferol</ProprietaryName>
    <NonProprietaryName>Doxercalciferol</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20200211</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211670</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>DOXERCALCIFEROL</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>ug/2mL</StrengthUnit>
    <Pharm_Classes>Ergocalciferols [CS], Vitamin D2 Analog [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220209</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Doxercalciferol Injection is indicated for the treatment of secondary hyperparathyroidism in adult patients with CKD on dialysis.</IndicationAndUsage>
    <Description>Doxercalciferol Injection contains doxercalciferol, which is a synthetic vitamin D2 analog. Doxercalciferol undergoes metabolic activation in vivo to form 1α,25-dihydroxyvitamin D2 (1α,25-(OH)2D2), a naturally occurring, biologically active form of vitamin D2. Doxercalciferol is a colorless crystalline compound with a calculated molecular weight of 412.65 and a molecular formula of C28H44O2. It is soluble in oils and organic solvents, but is relatively insoluble in water. Chemically, doxercalciferol is (1α,3β,5Z,7E,22E)-9,10-secoergosta-5,7,10(19),22-tetraene-1,3-diol. The structural formula is. Doxercalciferol Injection 2 mL multi-dose vials contain 4 mcg per 2 mL (2 mcg per mL) of doxercalciferol. Each milliliter (mL) of solution contains 2 mcg doxercalciferol and the following inactive ingredients: butylated hydroxytoluene, 20 mcg; edetate disodium, 1.1 mg; dehydrated alcohol, 59.25 mg; polysorbate 20, 10 mg; sodium chloride, 1.5 mg; disodium hydrogen phosphate, anhydrous, 7.63 mg; and monosodium phosphate monohydrate, 1.8 mg.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-807-02</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (71288-807-02)  / 1 mL in 1 VIAL, SINGLE-DOSE (71288-807-01) </PackageDescription>
    <NDC11Code>71288-0807-02</NDC11Code>
    <ProductNDC>71288-807</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Phenylephrine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Phenylephrine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20180427</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210334</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-06-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180427</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Phenylephrine Hydrochloride Injection 10 mg per mL is indicated for increasing blood pressure in adults with clinically important hypotension resulting primarily from vasodilation in the settings of anesthesia and septic shock.</IndicationAndUsage>
    <Description>Phenylephrine Hydrochloride Injection, USP contains active pharmaceutical ingredient phenylephrine in the form of hydrochloride salt. Phenylephrine is a synthetic sympathomimetic agent in sterile form for parenteral injection. Phenylephrine hydrochloride chemical name is (-)-m-Hydroxy-α [(methylamino)methyl]benzyl alcohol hydrochloride and has the following structural formula. Phenylephrine hydrochloride is very soluble in water, freely soluble in ethanol, and insoluble in chloroform and ethyl ether. Phenylephrine hydrochloride is sensitive to light. Phenylephrine Hydrochloride Injection, USP, 10 mg per mL. Phenylephrine Hydrochloride Injection, USP is a clear, colorless, aqueous solution that is essentially free of visible foreign matter. It MUST BE DILUTED before administration as bolus intravenous infusion or continuous intravenous infusion. Each mL contains: 10 mg of Phenylephrine Hydrochloride (equivalent to 8.2 mg of phenylephrine base); 3.5 mg of Sodium Chloride USP as tonicity agent; 1 mg of Citric Acid Monohydrate USP and 4 mg of Sodium Citrate Dihydrate USP, as buffering agents; 2 mg of Sodium Metabisulfite NF, as antioxidant, and Sodium Hydroxide NF and Hydrochloric Acid NF, as pH adjusters in Water for Injection. Phenylephrine Hydrochloride Injection, USP pH range is 3.0 to 6.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>10736-202-02</NDCCode>
    <PackageDescription>765 L in 1 CYLINDER (10736-202-02) </PackageDescription>
    <NDC11Code>10736-0202-02</NDC11Code>
    <ProductNDC>10736-202</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxygen</ProprietaryName>
    <NonProprietaryName>Oxygen</NonProprietaryName>
    <DosageFormName>GAS</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>19630101</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA205767</ApplicationNumber>
    <LabelerName>MEDICAL-TECHNICAL GASES, INC.</LabelerName>
    <SubstanceName>OXYGEN</SubstanceName>
    <StrengthNumber>990</StrengthNumber>
    <StrengthUnit>mL/L</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2025-11-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19630101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
</NDCList>