RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>71288-414-92</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (71288-414-92)  / 1 mL in 1 VIAL, SINGLE-DOSE (71288-414-91) </PackageDescription>
    <NDC11Code>71288-0414-92</NDC11Code>
    <ProductNDC>71288-414</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glycopyrrolate</ProprietaryName>
    <NonProprietaryName>Glycopyrrolate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20210706</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212802</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>GLYCOPYRROLATE</SubstanceName>
    <StrengthNumber>.2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-01-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210706</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Glycopyrrolate Injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, Glycopyrrolate Injection may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants.</IndicationAndUsage>
    <Description>Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains. Glycopyrrolate, USP 0.2 mg. Water for Injection, USP q.s. Benzyl Alcohol, NF 0.9% (preservative). pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.34. Its structural formula is as follows. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection, USP is a clear, colorless, sterile liquid; pH 2.0 – 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P= -1.52) at ambient room temperature (24°C).</Description>
  </NDC>
  <NDC>
    <NDCCode>71610-414-92</NDCCode>
    <PackageDescription>270 TABLET, FILM COATED in 1 BOTTLE (71610-414-92) </PackageDescription>
    <NDC11Code>71610-0414-92</NDC11Code>
    <ProductNDC>71610-414</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ibuprofen</ProprietaryName>
    <NonProprietaryName>Ibuprofen</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20090610</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075682</ApplicationNumber>
    <LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
    <SubstanceName>IBUPROFEN</SubstanceName>
    <StrengthNumber>400</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200730</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Carefully consider the potential benefits and risks of Ibuprofentablets and other treatment options before deciding to use Ibuprofen.Use the lowest effective dose for the shortest duration consistent withindividual patient treatment goals (see WARNINGS). IBU tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. IBU tablets are indicated for relief of mild to moderate pain. IBU tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of IBU tablets in children have not been conducted.</IndicationAndUsage>
    <Description>IBU tablets contain the active ingredient ibuprofen, which is (±) -2 - (p - isobutylphenyl) propionic acid. Ibuprofen is a white powde rwith a melting point of 74-77° C and is very slightly soluble in water(&lt;1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula is represented below. IBU, a nonsteroidal anti-inflammatory drug (NSAID), is availablein 400 mg, 600 mg, and 800 mg tablets for oral administration.Inactive ingredients: carnauba wax, colloidal silicon dioxide,croscarmellose sodium, hypromellose, magnesium stearate, microcrystallinecellulose, polydextrose, polyethylene glycol, polysorbate,titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-414-03</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (71288-414-03)  / 1 mL in 1 VIAL, SINGLE-DOSE (71288-414-01) </PackageDescription>
    <NDC11Code>71288-0414-03</NDC11Code>
    <ProductNDC>71288-414</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glycopyrrolate</ProprietaryName>
    <NonProprietaryName>Glycopyrrolate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20210706</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212802</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>GLYCOPYRROLATE</SubstanceName>
    <StrengthNumber>.2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210706</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Glycopyrrolate Injection is an anticholinergic indicated. in anesthesia (adult and pediatric patients): 1 for reduction of salivary, tracheobronchial, and pharyngeal secretions, reduction of volume and acidity of gastric secretions, and blockade of cardiac inhibitory reflexes during induction of anesthesia and intubation., 2 intraoperatively to counteract surgically or drug-induced or vagal reflex-associated arrhythmias., 3 for protection against peripheral muscarinic effects of cholinergic agents. (1).</IndicationAndUsage>
    <Description>Glycopyrrolate is a synthetic anticholinergic agent. It is a quaternary ammonium salt with the following chemical name. 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.34. Its structural formula is as follows. C19H28BrNO3             398.34. Glycopyrrolate occurs as a white, odorless, crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. It is completely ionized at physiological pH values. Glycopyrrolate Injection, USP is a clear, colorless, sterile liquid with a pH of 2.0 to 3.0. The partition coefficient of glycopyrrolate in n-octanol/water system is 0.304 (log10 P = -1.52) at ambient room temperature (24°C). Glycopyrrolate Injection, USP is intended for intramuscular or intravenous administration. Each 1 mL contains 0.2 mg of glycopyrrolate, water for injection, and hydrochloric acid or sodium hydroxide as pH adjusters.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-414-04</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (71288-414-04)  / 2 mL in 1 VIAL, SINGLE-DOSE (71288-414-02) </PackageDescription>
    <NDC11Code>71288-0414-04</NDC11Code>
    <ProductNDC>71288-414</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glycopyrrolate</ProprietaryName>
    <NonProprietaryName>Glycopyrrolate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20210706</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212802</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>GLYCOPYRROLATE</SubstanceName>
    <StrengthNumber>.2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210706</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Glycopyrrolate Injection is an anticholinergic indicated. in anesthesia (adult and pediatric patients): 1 for reduction of salivary, tracheobronchial, and pharyngeal secretions, reduction of volume and acidity of gastric secretions, and blockade of cardiac inhibitory reflexes during induction of anesthesia and intubation., 2 intraoperatively to counteract surgically or drug-induced or vagal reflex-associated arrhythmias., 3 for protection against peripheral muscarinic effects of cholinergic agents. (1).</IndicationAndUsage>
    <Description>Glycopyrrolate is a synthetic anticholinergic agent. It is a quaternary ammonium salt with the following chemical name. 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.34. Its structural formula is as follows. C19H28BrNO3             398.34. Glycopyrrolate occurs as a white, odorless, crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. It is completely ionized at physiological pH values. Glycopyrrolate Injection, USP is a clear, colorless, sterile liquid with a pH of 2.0 to 3.0. The partition coefficient of glycopyrrolate in n-octanol/water system is 0.304 (log10 P = -1.52) at ambient room temperature (24°C). Glycopyrrolate Injection, USP is intended for intramuscular or intravenous administration. Each 1 mL contains 0.2 mg of glycopyrrolate, water for injection, and hydrochloric acid or sodium hydroxide as pH adjusters.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-414-94</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (71288-414-94)  / 2 mL in 1 VIAL, SINGLE-DOSE (71288-414-93) </PackageDescription>
    <NDC11Code>71288-0414-94</NDC11Code>
    <ProductNDC>71288-414</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glycopyrrolate</ProprietaryName>
    <NonProprietaryName>Glycopyrrolate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20210706</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212802</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>GLYCOPYRROLATE</SubstanceName>
    <StrengthNumber>.2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-01-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210706</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Glycopyrrolate Injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, Glycopyrrolate Injection may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants.</IndicationAndUsage>
    <Description>Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains. Glycopyrrolate, USP 0.2 mg. Water for Injection, USP q.s. Benzyl Alcohol, NF 0.9% (preservative). pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.34. Its structural formula is as follows. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection, USP is a clear, colorless, sterile liquid; pH 2.0 – 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P= -1.52) at ambient room temperature (24°C).</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-019-92</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (71288-019-92)  / 5 mL in 1 VIAL, SINGLE-DOSE (71288-019-91) </PackageDescription>
    <NDC11Code>71288-0019-92</NDC11Code>
    <ProductNDC>71288-019</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tigecycline</ProprietaryName>
    <NonProprietaryName>Tigecycline</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20260401</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214020</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>TIGECYCLINE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>Tetracycline-class Antibacterial [EPC], Tetracyclines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260401</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tigecycline for Injection is a tetracycline class antibacterial indicated in patients 18 years of age and older for: : 1 Complicated skin and skin structure infections (1.1) , 2 Complicated intra-abdominal infections (1.2) , 3 Community-acquired bacterial pneumonia (1.3) .</IndicationAndUsage>
    <Description>Tigecycline is a tetracycline class antibacterial for intravenous infusion. The chemical name of tigecycline is (4S,4aS,5aR,12aS)-9-[2-(tert-butylamino)acetamido]-4,7-bis(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,10,12,12a-tetrahydroxy-1,11-dioxo-2-naphthacenecarboxamide. The empirical formula is C29H39N5O8 and the molecular weight is 585.65. The following represents the chemical structure of tigecycline. Tigecycline for Injection, USP is an orange lyophilized cake or powder. Each Tigecycline for Injection, USP single-dose 10 mL vial contains 50 mg tigecycline lyophilized powder for reconstitution for intravenous infusion and 100 mg of lactose monohydrate. The pH is adjusted with hydrochloric acid, and if necessary sodium hydroxide. The product does not contain preservatives.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-031-92</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (71288-031-92)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (71288-031-91) </PackageDescription>
    <NDC11Code>71288-0031-92</NDC11Code>
    <ProductNDC>71288-031</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ampicillin And Sulbactam</ProprietaryName>
    <NonProprietaryName>Ampicillin Sodium And Sulbactam Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20051129</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065406</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>AMPICILLIN SODIUM; SULBACTAM SODIUM</SubstanceName>
    <StrengthNumber>1; .5</StrengthNumber>
    <StrengthUnit>g/1; g/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20051129</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ampicillin and Sulbactam for Injection is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli*, Klebsiella spp.* (including K. pneumoniae*), Proteus mirabilis*, Bacteroides fragilis*, Enterobacter spp.*, and Acinetobacter calcoaceticus*. NOTE: For information on use in pediatric patients see PRECAUTIONS-Pediatric Use and CLINICAL STUDIES sections. Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae*), Bacteroides spp. (including B. fragilis), and Enterobacter spp.*. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli*, and Bacteroides spp.* (including B. fragilis*). *Efficacy for this organism in this organ system was studied in fewer than 10 infections. While ampicillin and sulbactam for injection is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with ampicillin and sulbactam for injection due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to ampicillin and sulbactam for injection should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to ampicillin and sulbactam for injection. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of ampicillin and sulbactam for injection and other antibacterial drugs, ampicillin and sulbactam for injection should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Ampicillin and Sulbactam for Injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0] heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection, USP is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8 and 10. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 1.5 g vial contains ampicillin 1 g and sulbactam 0.5 g (equivalent to 1.063 g ampicillin sodium and 0.547 g sulbactam sodium). Each 1.5 g vial contains approximately 115 mg of sodium. Each 3 g vial contains ampicillin 2 g and sulbactam 1 g (equivalent to 2.126 g ampicillin sodium and 1.094 g sulbactam sodium). Each 3 g vial contains approximately 230 mg of sodium.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-032-92</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (71288-032-92)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (71288-032-91) </PackageDescription>
    <NDC11Code>71288-0032-92</NDC11Code>
    <ProductNDC>71288-032</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ampicillin And Sulbactam</ProprietaryName>
    <NonProprietaryName>Ampicillin Sodium And Sulbactam Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20051129</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065406</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>AMPICILLIN SODIUM; SULBACTAM SODIUM</SubstanceName>
    <StrengthNumber>2; 1</StrengthNumber>
    <StrengthUnit>g/1; g/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20051129</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ampicillin and Sulbactam for Injection is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli*, Klebsiella spp.* (including K. pneumoniae*), Proteus mirabilis*, Bacteroides fragilis*, Enterobacter spp.*, and Acinetobacter calcoaceticus*. NOTE: For information on use in pediatric patients see PRECAUTIONS-Pediatric Use and CLINICAL STUDIES sections. Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae*), Bacteroides spp. (including B. fragilis), and Enterobacter spp.*. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli*, and Bacteroides spp.* (including B. fragilis*). *Efficacy for this organism in this organ system was studied in fewer than 10 infections. While ampicillin and sulbactam for injection is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with ampicillin and sulbactam for injection due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to ampicillin and sulbactam for injection should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to ampicillin and sulbactam for injection. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of ampicillin and sulbactam for injection and other antibacterial drugs, ampicillin and sulbactam for injection should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Ampicillin and Sulbactam for Injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0] heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection, USP is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8 and 10. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 1.5 g vial contains ampicillin 1 g and sulbactam 0.5 g (equivalent to 1.063 g ampicillin sodium and 0.547 g sulbactam sodium). Each 1.5 g vial contains approximately 115 mg of sodium. Each 3 g vial contains ampicillin 2 g and sulbactam 1 g (equivalent to 2.126 g ampicillin sodium and 1.094 g sulbactam sodium). Each 3 g vial contains approximately 230 mg of sodium.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-117-92</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (71288-117-92)  / 26.3 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>71288-0117-92</NDC11Code>
    <ProductNDC>71288-117</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gemcitabine</ProprietaryName>
    <NonProprietaryName>Gemcitabine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20201211</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212129</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>GEMCITABINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>38</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-07-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201211</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Gemcitabine Injection is a nucleoside metabolic inhibitor indicated: 1 in combination with carboplatin, for the treatment of advanced ovarian cancer that has relapsed at least 6 months after completion of platinum-based therapy. (1.1), 2 in combination with paclitaxel, for first-line treatment of metastatic breast cancer after failure of prior anthracycline-containing adjuvant chemotherapy, unless anthracyclines were clinically contraindicated. (1.2), 3 in combination with cisplatin for the treatment of non-small cell lung cancer. (1.3), 4 as a single agent for the treatment of pancreatic cancer. (1.4).</IndicationAndUsage>
    <Description>Gemcitabine is a nucleoside metabolic inhibitor. The chemical name of gemcitabine HCl is 2′-deoxy- 2′,2′-difluorocytidine monohydrochloride (β-isomer). The structural formula is as follows. Gemcitabine HCl is a white to off-white solid with a molecular formula of C9H11F2N3O4  HCl and a molecular weight of 299.66 g/mol. It is soluble in water, slightly soluble in methanol, and practically insoluble in ethanol and polar organic solvents. Gemcitabine Injection is a sterile solution in single-dose vials for intravenous use. Each vial contains 200 mg, 1 gram, or 2 grams of gemcitabine equivalent to 227.55 mg, 1.14 grams, or 2.28 grams of gemcitabine HCl. Each mL contains 38 mg of gemcitabine free base in Water for Injection equivalent to 43.26 mg of gemcitabine HCl. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-166-92</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (71288-166-92)  / 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>71288-0166-92</NDC11Code>
    <ProductNDC>71288-166</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pemetrexed</ProprietaryName>
    <NonProprietaryName>Pemetrexed Disodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20220525</StartMarketingDate>
    <EndMarketingDate>20260828</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208696</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>PEMETREXED DISODIUM HEMIPENTAHYDRATE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/10mL</StrengthUnit>
    <Pharm_Classes>Folate Analog Metabolic Inhibitor [EPC], Folic Acid Metabolism Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-08-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20220525</StartMarketingDatePackage>
    <EndMarketingDatePackage>20260828</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>71288-172-92</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (71288-172-92)  / 20 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>71288-0172-92</NDC11Code>
    <ProductNDC>71288-172</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxaliplatin</ProprietaryName>
    <NonProprietaryName>Oxaliplatin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20240111</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217348</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>OXALIPLATIN</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Platinum-based Drug [EPC], Platinum-containing Compounds [EXT]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-10-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240111</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Oxaliplatin Injection, in combination with infusional fluorouracil and leucovorin, is indicated for: : 1 adjuvant treatment of stage III colon cancer in patients who have undergone complete resection of the primary tumor. , 2 treatment of advanced colorectal cancer. .</IndicationAndUsage>
    <Description>Oxaliplatin is a platinum-based drug with the molecular formula C8H14N2O4Pt and the chemical name of cis-[(1 R,2 R)-1,2-cyclohexanediamine-N,N'] [oxalato(2-)- O,O'] platinum. Oxaliplatin is an organoplatinum complex in which the platinum atom is complexed with 1,2-diaminocyclohexane (DACH) and with an oxalate ligand as a leaving group. The molecular weight is 397.3. Oxaliplatin is slightly soluble in water at 6 mg per mL, very slightly soluble in methanol, and practically insoluble in ethanol and acetone. Oxaliplatin Injection, USP, for intravenous use is supplied in vials containing 50 mg or 100 mg of oxaliplatin, USP as a sterile, preservative-free, aqueous solution at a concentration of 5 mg per mL. Water for Injection, USP is present as an inactive ingredient.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-203-92</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (71288-203-92)  / 2 mL in 1 VIAL, SINGLE-DOSE (71288-203-91) </PackageDescription>
    <NDC11Code>71288-0203-92</NDC11Code>
    <ProductNDC>71288-203</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Furosemide</ProprietaryName>
    <NonProprietaryName>Furosemide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20220127</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212803</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>FUROSEMIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-10-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220127</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Parenteral therapy should be reserved for patients unable to take oral medication or for patients in emergency clinical situations.</IndicationAndUsage>
    <Description>Furosemide is a diuretic which is an anthranilic acid derivative. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide Injection, USP 10 mg per mL is a sterile, nonpyrogenic solution in vials for intravenous and intramuscular injection. Furosemide is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, sparingly soluble in alcohol, freely soluble in dilute alkali solutions and insoluble in dilute acids. The structural formula is as follows. Each mL contains: Furosemide 10 mg, Water for Injection q.s., Sodium Chloride for isotonicity, Sodium Hydroxide and, if necessary, Hydrochloric Acid to adjust pH between 8.0 and 9.3.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-300-92</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 CARTON (71288-300-92)  / 1 mL in 1 VIAL, MULTI-DOSE (71288-300-91) </PackageDescription>
    <NDC11Code>71288-0300-92</NDC11Code>
    <ProductNDC>71288-300</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cyanocobalamin</ProprietaryName>
    <NonProprietaryName>Cyanocobalamin</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20241115</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214316</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>CYANOCOBALAMIN</SubstanceName>
    <StrengthNumber>1000</StrengthNumber>
    <StrengthUnit>ug/mL</StrengthUnit>
    <Pharm_Classes>Vitamin B 12 [CS], Vitamin B12 [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241115</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cyanocobalamin is indicated for vitamin B12 deficiencies due to malabsorption which may be associated with the following conditions.           Addisonian (pernicious) anemia          Gastrointestinal pathology, dysfunction, or surgery, including gluten enteropathy or sprue, small bowel bacteria overgrowth, total or partial gastrectomy          Fish tapeworm infestation          Malignancy of pancreas or bowel          Folic acid deficiency. It may be possible to treat the underlying disease by surgical correction of anatomic lesions leading to small bowel bacterial overgrowth, expulsion of fish tapeworm, discontinuation of drugs leading to vitamin malabsorption (see Drug/Laboratory Test Interactions), use of a gluten-free diet in nontropical sprue, or administration of antibiotics in tropical sprue. Such measures remove the need for long-term administration of cyanocobalamin. Requirements of vitamin B12 in excess of normal (due to pregnancy, thyrotoxicosis, hemolytic anemia, hemorrhage, malignancy, hepatic and renal disease) can usually be met with oral supplementation. Cyanocobalamin Injection is also suitable for the vitamin B12 absorption test (Schilling Test).</IndicationAndUsage>
    <Description>Cyanocobalamin Injection, USP is a sterile solution of cyanocobalamin for intramuscular or subcutaneous injection. Each mL contains 1,000 mcg cyanocobalamin. Each vial also contains Sodium Chloride, 0.9%. Benzyl Alcohol, 1.5%, is present as a preservative. Hydrochloric acid and/or sodium hydroxide may have been added during manufacture to adjust the pH (range 4.5 to 7.0). Cyanocobalamin appears as dark red crystals or as an amorphous or crystalline red powder. It is very hygroscopic in the anhydrous form, and sparingly soluble in water (1:80). It is stable to autoclaving for short periods at 121°C. The vitamin B12 coenzymes are very unstable in light. The chemical name is 5,6-dimethyl-benzimidazolyl cyanocobamide; the molecular formula is C63H88CoN14O14P. The cobalt content is 4.34%. The molecular weight is 1355.39. The structural formula is represented below.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-303-92</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 CARTON (71288-303-92)  / 1 mL in 1 VIAL, MULTI-DOSE (71288-303-91) </PackageDescription>
    <NDC11Code>71288-0303-92</NDC11Code>
    <ProductNDC>71288-303</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cyanocobalamin</ProprietaryName>
    <NonProprietaryName>Cyanocobalamin</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20200924</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214390</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>CYANOCOBALAMIN</SubstanceName>
    <StrengthNumber>1000</StrengthNumber>
    <StrengthUnit>ug/mL</StrengthUnit>
    <Pharm_Classes>Vitamin B 12 [CS], Vitamin B12 [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-06-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200924</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cyanocobalamin is indicated for vitamin B12 deficiencies due to malabsorption which may be associated with the following conditions. : 1 Addisonian (pernicious) anemia, 2 Gastrointestinal pathology, dysfunction, or surgery, including gluten enteropathy or sprue, small bowel bacteria overgrowth, total or partial gastrectomy, 3 Fish tapeworm infestation, 4 Malignancy of pancreas or bowel, 5 Folic acid deficiency.</IndicationAndUsage>
    <Description>Cyanocobalamin Injection, USP is a sterile solution of cyanocobalamin for intramuscular or subcutaneous injection. Each mL contains 1,000 mcg cyanocobalamin. Each vial also contains Sodium Chloride, 0.9%. Benzyl Alcohol, 1.5%, is present as a preservative. Hydrochloric acid and/or sodium hydroxide may have been added during manufacture to adjust the pH (range 4.5-7.0). Cyanocobalamin appears as dark red crystals or as an amorphous or crystalline red powder. It is very hygroscopic in the anhydrous form, and sparingly soluble in water (1:80). It is stable to autoclaving for short periods at 121°C. The vitamin B12 coenzymes are very unstable in light. The chemical name is 5,6-dimethyl-benzimidazolyl cyanocobamide; the molecular formula is C63H88CoN14O14P. The cobalt content is 4.34%. The molecular weight is 1355.39. The structural formula is represented below.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-427-92</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (71288-427-92)  / 5 mL in 1 VIAL, SINGLE-DOSE (71288-427-91) </PackageDescription>
    <NDC11Code>71288-0427-92</NDC11Code>
    <ProductNDC>71288-427</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bivalirudin</ProprietaryName>
    <NonProprietaryName>Bivalirudin</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20180716</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091602</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>BIVALIRUDIN</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>Anti-coagulant [EPC], Direct Thrombin Inhibitor [EPC], Thrombin Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-04-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180716</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Bivalirudin for Injection is indicated for use as an anticoagulant for use in patients undergoing percutaneous coronary intervention (PCI) including patients with heparin-induced thrombocytopenia and heparin-induced thrombocytopenia and thrombosis syndrome.</IndicationAndUsage>
    <Description>Bivalirudin for Injection contains bivalirudin which is a specific and reversible direct thrombin inhibitor. Bivalirudin is a synthetic, 20 amino acid peptide, with the chemical name of D-phenylalanyl-L-prolyl-L-arginyl-L-prolyl-glycyl-glycyl-glycyl-glycyl-L-asparagyl-glycyl-L-aspartyl-L-phenylalanyl-L-glutamyl-L-glutamyl-L-isoleucyl-L-prolyl-L-glutamyl-L-glutamyl-L-tyrosyl-L-leucine. The active pharmaceutical ingredient is in the form of bivalirudin trifluoroacetate as a white to off-white powder. The chemical name for bivalirudin trifluoroacetate is D-phenylalanyl-L-prolyl-L-arginyl-L-prolyl-glycyl-glycyl-glycyl-glycyl-L-asparagyl-glycyl-L-aspartyl-L-phenylalanyl-L-glutamyl-L-glutamyl-L-isoleucyl-L-prolyl-L-glutamyl-L-glutamyl-L-tyrosyl-L-leucine trifluoroacetate (Figure 1). The molecular weight of bivalirudin is 2180 daltons (anhydrous free base peptide). Figure 1: Structural formula for bivalirudin. Bivalirudin for Injection is supplied as a sterile white lyophilized cake, in single-dose vials. Each vial contains 250 mg bivalirudin, equivalent to an average of 275 mg of bivalirudin trifluoroacetate*, 125 mg mannitol, and sodium hydroxide to adjust the pH to 5-6 (equivalent of approximately 12.5 mg sodium). When reconstituted with Sterile Water for Injection, the product yields a clear to opalescent, colorless to slightly yellow solution, pH 5-6. * The range of bivalirudin trifluoroacetate is 266 to 284 mg based on a range of trifluoroacetic acid composition of 1.2 to 2.6 equivalents.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-432-92</NDCCode>
    <PackageDescription>10 SYRINGE in 1 CARTON (71288-432-92)  / .3 mL in 1 SYRINGE (71288-432-91) </PackageDescription>
    <NDC11Code>71288-0432-92</NDC11Code>
    <ProductNDC>71288-432</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Enoxaparin Sodium</ProprietaryName>
    <NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20191201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206834</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Enoxaparin Sodium Injection is a low molecular weight heparin (LMWH) indicated for: : 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1) , 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2) , 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2) , 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (MI) (1.3) , 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4) .</IndicationAndUsage>
    <Description>Enoxaparin Sodium Injection, USP is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4,500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA. Enoxaparin Sodium Injection, USP 100 mg per mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1,000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Enoxaparin Sodium Injection, USP 150 mg per mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1,500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Enoxaparin Sodium Injection, USP prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-433-92</NDCCode>
    <PackageDescription>10 SYRINGE in 1 CARTON (71288-433-92)  / .4 mL in 1 SYRINGE (71288-433-91) </PackageDescription>
    <NDC11Code>71288-0433-92</NDC11Code>
    <ProductNDC>71288-433</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Enoxaparin Sodium</ProprietaryName>
    <NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20191201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206834</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Enoxaparin Sodium Injection is a low molecular weight heparin (LMWH) indicated for: : 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1) , 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2) , 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2) , 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (MI) (1.3) , 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4) .</IndicationAndUsage>
    <Description>Enoxaparin Sodium Injection, USP is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4,500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA. Enoxaparin Sodium Injection, USP 100 mg per mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1,000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Enoxaparin Sodium Injection, USP 150 mg per mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1,500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Enoxaparin Sodium Injection, USP prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-434-92</NDCCode>
    <PackageDescription>10 SYRINGE in 1 CARTON (71288-434-92)  / .6 mL in 1 SYRINGE (71288-434-91) </PackageDescription>
    <NDC11Code>71288-0434-92</NDC11Code>
    <ProductNDC>71288-434</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Enoxaparin Sodium</ProprietaryName>
    <NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20191201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206834</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Enoxaparin Sodium Injection is a low molecular weight heparin (LMWH) indicated for: : 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1) , 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2) , 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2) , 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (MI) (1.3) , 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4) .</IndicationAndUsage>
    <Description>Enoxaparin Sodium Injection, USP is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4,500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA. Enoxaparin Sodium Injection, USP 100 mg per mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1,000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Enoxaparin Sodium Injection, USP 150 mg per mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1,500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Enoxaparin Sodium Injection, USP prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-435-92</NDCCode>
    <PackageDescription>10 SYRINGE in 1 CARTON (71288-435-92)  / .8 mL in 1 SYRINGE (71288-435-91) </PackageDescription>
    <NDC11Code>71288-0435-92</NDC11Code>
    <ProductNDC>71288-435</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Enoxaparin Sodium</ProprietaryName>
    <NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20191201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206834</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Enoxaparin Sodium Injection is a low molecular weight heparin (LMWH) indicated for: : 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1) , 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2) , 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2) , 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (MI) (1.3) , 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4) .</IndicationAndUsage>
    <Description>Enoxaparin Sodium Injection, USP is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4,500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA. Enoxaparin Sodium Injection, USP 100 mg per mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1,000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Enoxaparin Sodium Injection, USP 150 mg per mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1,500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Enoxaparin Sodium Injection, USP prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-436-92</NDCCode>
    <PackageDescription>10 SYRINGE in 1 CARTON (71288-436-92)  / 1 mL in 1 SYRINGE (71288-436-91) </PackageDescription>
    <NDC11Code>71288-0436-92</NDC11Code>
    <ProductNDC>71288-436</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Enoxaparin Sodium</ProprietaryName>
    <NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20191201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206834</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Enoxaparin Sodium Injection is a low molecular weight heparin (LMWH) indicated for: : 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1) , 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2) , 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2) , 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (MI) (1.3) , 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4) .</IndicationAndUsage>
    <Description>Enoxaparin Sodium Injection, USP is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4,500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA. Enoxaparin Sodium Injection, USP 100 mg per mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1,000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Enoxaparin Sodium Injection, USP 150 mg per mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1,500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Enoxaparin Sodium Injection, USP prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-437-92</NDCCode>
    <PackageDescription>10 SYRINGE in 1 CARTON (71288-437-92)  / .8 mL in 1 SYRINGE (71288-437-91) </PackageDescription>
    <NDC11Code>71288-0437-92</NDC11Code>
    <ProductNDC>71288-437</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Enoxaparin Sodium</ProprietaryName>
    <NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20191201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206834</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Enoxaparin Sodium Injection is a low molecular weight heparin (LMWH) indicated for: : 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1) , 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2) , 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2) , 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (MI) (1.3) , 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4) .</IndicationAndUsage>
    <Description>Enoxaparin Sodium Injection, USP is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4,500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA. Enoxaparin Sodium Injection, USP 100 mg per mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1,000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Enoxaparin Sodium Injection, USP 150 mg per mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1,500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Enoxaparin Sodium Injection, USP prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-600-92</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (71288-600-92)  / 10 mL in 1 VIAL, SINGLE-DOSE (71288-600-91) </PackageDescription>
    <NDC11Code>71288-0600-92</NDC11Code>
    <ProductNDC>71288-600</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pantoprazole Sodium</ProprietaryName>
    <NonProprietaryName>Pantoprazole Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20220829</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215860</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/10mL</StrengthUnit>
    <Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220829</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pantoprazole Sodium for Injection is indicated for treatment of: 1 gastroesophageal reflux disease (GERD) and a history of erosive esophagitis (EE) for up to 10 days in adults., 2 pathological hypersecretory conditions including Zollinger-Ellison (ZE) Syndrome in adults.</IndicationAndUsage>
    <Description>The active ingredient in Pantoprazole Sodium for Injection, a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C16H14F2N3NaO4S, with a molecular weight of 405.4. The structural formula is. Pantoprazole sodium, USP is a white to off-white crystalline powder and is racemic. Pantoprazole sodium, USP has weakly basic and acidic properties. Pantoprazole sodium, USP is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The reconstituted solution of Pantoprazole Sodium for Injection is in the pH range of 9.0 to 10.5. Pantoprazole Sodium for Injection is supplied for intravenous administration as a sterile, freeze-dried powder in a single-dose clear glass vial fitted with a rubber stopper and crimp seal. Each vial contains 40 mg pantoprazole (equivalent to 45.1 mg of pantoprazole sodium, USP), edetate disodium dihydrate, USP (1 mg), and sodium hydroxide, NF to adjust pH.</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-700-92</NDCCode>
    <PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (71288-700-92)  / 5 mL in 1 VIAL, MULTI-DOSE (71288-700-91) </PackageDescription>
    <NDC11Code>71288-0700-92</NDC11Code>
    <ProductNDC>71288-700</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Rocuronium Bromide</ProprietaryName>
    <NonProprietaryName>Rocuronium Bromide</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20230508</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213453</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>ROCURONIUM BROMIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230508</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>71288-718-92</NDCCode>
    <PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (71288-718-92)  / 10 mL in 1 VIAL, MULTI-DOSE (71288-718-91) </PackageDescription>
    <NDC11Code>71288-0718-92</NDC11Code>
    <ProductNDC>71288-718</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Rocuronium Bromide</ProprietaryName>
    <NonProprietaryName>Rocuronium Bromide</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20230508</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213453</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>ROCURONIUM BROMIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230508</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>71288-719-92</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 CARTON (71288-719-92)  / 10 mL in 1 VIAL, MULTI-DOSE (71288-719-91) </PackageDescription>
    <NDC11Code>71288-0719-92</NDC11Code>
    <ProductNDC>71288-719</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Succinylcholine Chloride</ProprietaryName>
    <NonProprietaryName>Succinylcholine Chloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20211019</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214514</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>SUCCINYLCHOLINE CHLORIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Depolarizing Neuromuscular Blocker [EPC], Neuromuscular Depolarizing Blockade [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-10-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211019</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Succinylcholine Chloride Injection is indicated in adults and pediatric patients: 1 as an adjunct to general anesthesia, 2 to facilitate tracheal intubation, 3 to provide skeletal muscle relaxation during surgery or mechanical ventilation.</IndicationAndUsage>
    <Description>Succinylcholine Chloride Injection, USP is a sterile, nonpyrogenic solution to be used as a short-acting, depolarizing neuromuscular blocker for intravenous or intramuscular use. Succinylcholine Chloride Injection, USP contains succinylcholine chloride as the active pharmaceutical ingredient. Succinylcholine Chloride, USP is chemically designated C14H30Cl2N2O4·2H2O and its molecular weight is 397.34. The chemical name of succinylcholine chloride is ethanaminium, 2,2'-[(1,4-dioxo-1,4-butanediyl)bis(oxy)]bis[N,N,N-trimethyl]-, dichloride. Succinylcholine chloride is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white, odorless, crystalline powder, very soluble in water. It has the following structural formula. Succinylcholine Chloride Injection, USP 200 mg per 10 mL (20 mg per mL) is intended for multiple-dose administration and contains preservative. Each 1 mL of Succinylcholine Chloride Injection, USP 200 mg per 10 mL (20 mg per mL) multi-dose fliptop vials contains: 20 mg of succinylcholine chloride anhydrous (equivalent to 22 mg of Succinylcholine Chloride, USP), 1.8 mg of methylparaben, NF and 0.2 mg of propylparaben, NF as preservatives, 4.7 mg of sodium chloride, USP as iso-osmotic agent, and sodium hydroxide, NF and hydrochloric acid, NF as pH adjusters in water for injection, USP. The pH of the solution is between 3.0 and 4.5, with an osmolarity of 0.338 mOsm/mL (calc.).</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-803-92</NDCCode>
    <PackageDescription>4 VIAL, SINGLE-DOSE in 1 CARTON (71288-803-92)  / 20 mL in 1 VIAL, SINGLE-DOSE (71288-803-91) </PackageDescription>
    <NDC11Code>71288-0803-92</NDC11Code>
    <ProductNDC>71288-803</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Mycophenolate Mofetil</ProprietaryName>
    <NonProprietaryName>Mycophenolate Mofetil</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20210115</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212130</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>MYCOPHENOLATE MOFETIL</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/20mL</StrengthUnit>
    <Pharm_Classes>Antimetabolite Immunosuppressant [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-09-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210115</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Mycophenolate Mofetil is indicated for the prophylaxis of organ rejection, in adult and pediatric recipients 3 months of age and older of allogeneic kidney [see Clinical Studies (14.1)], heart [see Clinical Studies (14.2)] or liver transplants [see Clinical Studies (14.3)], in combination with other immunosuppressants.</IndicationAndUsage>
    <Description>Mycophenolate mofetil is an antimetabolite immunosuppressant. It is the 2-morpholinoethyl ester of mycophenolic acid (MPA), an immunosuppressive agent; inosine monophosphate dehydrogenase (IMPDH) inhibitor. The chemical name for mycophenolate mofetil (MMF) is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate. It has an empirical formula of C23H31NO7, a molecular weight of 433.50, and the following structural formula. MMF is a white to off-white crystalline powder. It is slightly soluble in water (43 mcg/mL at pH 7.4); the solubility increases in acidic medium (4.27 mg/mL at pH 3.6). It is freely soluble in acetone, soluble in methanol, and sparingly soluble in ethanol. The apparent partition coefficient in 1-octanol/water (pH 7.4) buffer solution is 238. The pKa values for MMF are 5.6 for the morpholino group and 8.5 for the phenolic group. MMF hydrochloride has a solubility of 65.8 mg/mL in 5% Dextrose Injection USP (D5W). The pH of the reconstituted solution is 2.4 to 4.1. Mycophenolate Mofetil for Injection, USP is the hydrochloride salt of MMF. The chemical name for the hydrochloride salt of MMF is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate hydrochloride. It has an empirical formula of C23H31NO7 HCl and a molecular weight of 469.96. Mycophenolate Mofetil for Injection, USP is available as a sterile white to off-white lyophilized powder in single-dose vials containing MMF hydrochloride for administration by intravenous infusion only. Each vial contains 500 mg of mycophenolate mofetil equivalent to 542 mg of mycophenolate mofetil hydrochloride. The inactive ingredients are polysorbate 80, 25 mg; and anhydrous citric acid, 5 mg. Sodium hydroxide and/or hydrochloric acid may have been used in the manufacture of Mycophenolate Mofetil for Injection, USP to adjust the pH. Reconstitution and dilution with 5% Dextrose Injection, USP yields a slightly yellow solution of MMF, 6 mg per mL [see Dosage and Administration (2.6)].</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-002-31</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (71288-002-31)  &gt; 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (71288-002-30) </PackageDescription>
    <NDC11Code>71288-0002-31</NDC11Code>
    <ProductNDC>71288-002</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Piperacillin And Tazobactam</ProprietaryName>
    <NonProprietaryName>Piperacillin Sodium And Tazobactam Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20190729</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212287</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
    <StrengthNumber>2; .25</StrengthNumber>
    <StrengthUnit>g/1; g/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2023-12-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190729</StartMarketingDatePackage>
    <EndMarketingDatePackage>20231130</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Piperacillin and Tazobactam for Injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: : 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1) , 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2) , 3 Skin and skin structure infections in adults (1.3) , 4 Female pelvic infections in adults (1.4) , 5 Community-acquired pneumonia in adults (1.5) .</IndicationAndUsage>
    <Description>Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine-carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate. The chemical formula is C23H26N5NaO7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C10H11N4NaO5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is:. Piperacillin and tazobactam for injection, USP, is a white to off-white sterile, powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. : 1 Each piperacillin and tazobactam for injection, USP 2.25 gram single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 gram of tazobactam. , 2 Each piperacillin and tazobactam for injection, USP 3.375 gram single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 gram of tazobactam. , 3 Each piperacillin and tazobactam for injection, USP 4.5 gram single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 gram of tazobactam. .</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-003-31</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (71288-003-31)  &gt; 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (71288-003-30) </PackageDescription>
    <NDC11Code>71288-0003-31</NDC11Code>
    <ProductNDC>71288-003</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Piperacillin And Tazobactam</ProprietaryName>
    <NonProprietaryName>Piperacillin Sodium And Tazobactam Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20190729</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212287</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
    <StrengthNumber>3; .375</StrengthNumber>
    <StrengthUnit>g/1; g/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-02-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190729</StartMarketingDatePackage>
    <EndMarketingDatePackage>20240131</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Piperacillin and Tazobactam for Injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: : 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1) , 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2) , 3 Skin and skin structure infections in adults (1.3) , 4 Female pelvic infections in adults (1.4) , 5 Community-acquired pneumonia in adults (1.5) .</IndicationAndUsage>
    <Description>Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine-carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate. The chemical formula is C23H26N5NaO7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C10H11N4NaO5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is:. Piperacillin and tazobactam for injection, USP, is a white to off-white sterile, powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. : 1 Each piperacillin and tazobactam for injection, USP 2.25 gram single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 gram of tazobactam. , 2 Each piperacillin and tazobactam for injection, USP 3.375 gram single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 gram of tazobactam. , 3 Each piperacillin and tazobactam for injection, USP 4.5 gram single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 gram of tazobactam. .</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-004-51</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (71288-004-51)  &gt; 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (71288-004-50) </PackageDescription>
    <NDC11Code>71288-0004-51</NDC11Code>
    <ProductNDC>71288-004</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Piperacillin And Tazobactam</ProprietaryName>
    <NonProprietaryName>Piperacillin Sodium And Tazobactam Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20190729</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212287</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
    <StrengthNumber>4; .5</StrengthNumber>
    <StrengthUnit>g/1; g/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-01-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190729</StartMarketingDatePackage>
    <EndMarketingDatePackage>20231230</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Piperacillin and Tazobactam for Injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: : 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1) , 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2) , 3 Skin and skin structure infections in adults (1.3) , 4 Female pelvic infections in adults (1.4) , 5 Community-acquired pneumonia in adults (1.5) .</IndicationAndUsage>
    <Description>Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine-carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate. The chemical formula is C23H26N5NaO7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C10H11N4NaO5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is:. Piperacillin and tazobactam for injection, USP, is a white to off-white sterile, powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. : 1 Each piperacillin and tazobactam for injection, USP 2.25 gram single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 gram of tazobactam. , 2 Each piperacillin and tazobactam for injection, USP 3.375 gram single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 gram of tazobactam. , 3 Each piperacillin and tazobactam for injection, USP 4.5 gram single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 gram of tazobactam. .</Description>
  </NDC>
  <NDC>
    <NDCCode>71288-005-20</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (71288-005-20)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (71288-005-21) </PackageDescription>
    <NDC11Code>71288-0005-20</NDC11Code>
    <ProductNDC>71288-005</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ampicillin And Sulbactam</ProprietaryName>
    <NonProprietaryName>Ampicillin Sodium And Sulbactam Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20220117</StartMarketingDate>
    <EndMarketingDate>20240731</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090579</ApplicationNumber>
    <LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>AMPICILLIN SODIUM; SULBACTAM SODIUM</SubstanceName>
    <StrengthNumber>1; .5</StrengthNumber>
    <StrengthUnit>g/1; g/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-07-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20220117</StartMarketingDatePackage>
    <EndMarketingDatePackage>20240731</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ampicillin and sulbactam for injection is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli,* Klebsiella spp.* (including K. pneumoniae*), Proteus mirabilis,* Bacteroides fragilis,* Enterobacter spp.,* and Acinetobacter calcoaceticus.*. NOTE: For information on use in pediatric patients (see PRECAUTIONS - Pediatric Use and CLINICAL STUDIES sections). Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae*), Bacteroides spp. (including B. fragilis), and Enterobacter spp.*. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli,* and Bacteroides spp.* (including B. fragilis*). * Efficacy for this organism in this organ system was studied in fewer than 10 infections. While ampicillin and sulbactam for injection is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with ampicillin and sulbactam for injection due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to ampicillin and sulbactam for injection should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to ampicillin and sulbactam for injection. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of ampicillin and sulbactam for injection and other antibacterial drugs, ampicillin and sulbactam for injection should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Ampicillin and Sulbactam for Injection, USP is an injectable antibacterial combination consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S,5R,6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection, USP, ampicillin sodium/sulbactam sodium parenteral combination, is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8.0 and 10.0. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 1.5 gram vial of Ampicillin and Sulbactam for Injection, USP contains 1 gram ampicillin as the sodium salt plus 0.5 gram sulbactam as the sodium salt. The sodium content is approximately 115 mg (5 mEq) of sodium per vial. Each 3 gram vial of Ampicillin and Sulbactam for Injection, USP contains 2 grams ampicillin as the sodium salt plus 1 gram sulbactam as the sodium salt. The sodium content is approximately 230 mg (10 mEq) of sodium per vial.</Description>
  </NDC>
</NDCList>