{
"NDC": [
{
"NDCCode": "71288-439-05",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (71288-439-05) / 4 mL in 1 VIAL, SINGLE-USE (71288-439-04) ",
"NDC11Code": "71288-0439-05",
"ProductNDC": "71288-439",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Norepinephrine Bitartrate",
"NonProprietaryName": "Norepinephrine Bitartrate",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20241201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040455",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "NOREPINEPHRINE BITARTRATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Catecholamine [EPC], Catecholamines [CS]",
"Status": "Active",
"LastUpdate": "2024-12-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241201",
"SamplePackage": "N",
"IndicationAndUsage": "Norepinephrine Bitartrate Injection is indicated to raise blood pressure in adult patients with severe, acute hypotension.",
"Description": "Norepinephrine (sometimes referred to as l-arterenol/Levarterenol or l-norepinephrine) is a sympathomimetic amine which differs from epinephrine by the absence of a methyl group on the nitrogen atom. Norepinephrine bitartrate, USP is (-)-α-(aminomethyl)-3,4-dihydroxybenzyl alcohol tartrate (1:1) (salt) monohydrate (molecular weight 337.3 g/mol) and has the following structural formula. Norepinephrine Bitartrate Injection, USP is supplied in a sterile aqueous solution in the form of the bitartrate salt to be administered by intravenous infusion. Norepinephrine is sparingly soluble in water, very slightly soluble in alcohol and ether, and readily soluble in acids. Each mL contains 1 mg of norepinephrine base (equivalent to 1.89 mg of norepinephrine bitartrate, anhydrous basis), sodium chloride for isotonicity, not more than 2 mg of sodium metabisulfite as an antioxidant. It has a pH of 3.0 to 4.5. The air in the vials has been displaced by nitrogen gas."
},
{
"NDCCode": "13668-439-05",
"PackageDescription": "500 CAPSULE in 1 BOTTLE (13668-439-05) ",
"NDC11Code": "13668-0439-05",
"ProductNDC": "13668-439",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fenofibrate",
"NonProprietaryName": "Fenofibrate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20180701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210782",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "FENOFIBRATE",
"StrengthNumber": "134",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Peroxisome Proliferator Receptor alpha Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-12-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180701",
"SamplePackage": "N",
"IndicationAndUsage": "Treatment of Hypercholesterolemia. Fenofibrate capsules are indicated as adjunctive therapy to diet for the reduction of LDL-C, total-C, Triglycerides and apo B in adult patients with primary hypercholesterolemia or mixed dyslipidemia (Fredrickson Types IIa and IIb. Lipid altering agents should be used in addition to a diet restricted in saturated fat and cholesterol when response to diet and non-pharmacological interventions alone has been inadequate (see National Cholesterol Education Program [NCEP] Treatment Guidelines, below). Treatment of Hypertriglyceridemia. Fenofibrate capsules are also indicated as adjunctive therapy to diet for treatment of adult patients with hypertriglyceridemia (Fredrickson Types IV and V hyperlipidemia). Improving glycemic control in diabetic patients showing fasting chylomicronemia will usually reduce fasting triglycerides and eliminate chylomicronemia thereby obviating the need for pharmacologic intervention. Markedly elevated levels of serum triglycerides (e.g. > 2,000 mg/dL) may increase the risk of developing pancreatitis. The effect of fenofibrate capsule therapy on reducing this risk has not been adequately studied. Drug therapy is not indicated for patients with Type I hyperlipoproteinemia, who have elevations of chylomicrons and plasma triglycerides, but who have normal levels of very low density lipoprotein (VLDL). Inspection of plasma refrigerated for 14 hours is helpful in distinguishing Types I to IV and V hyperlipoproteinemia. The initial treatment for dyslipidemia is dietary therapy specific for the type of lipoprotein abnormality. Excess body weight and excess alcoholic intake may be important factors in hypertriglyceridemia and should be addressed prior to any drug therapy. Physical exercise can be an important ancillary measure. Diseases contributory to hyperlipidemia, such as hypothyroidism or diabetes mellitus should be looked for and adequately treated. Estrogen therapy, like thiazide diuretics and beta-blockers, is sometimes associated with massive rises in plasma triglycerides, especially in subjects with familial hypertriglyceridemia. In such cases, discontinuation of the specific etiologic agent may obviate the need for specific drug therapy of hypertriglyceridemia. The use of drugs should be considered only when reasonable attempts have been made to obtain satisfactory results with non-drug methods. If the decision is made to use drugs, the patient should be instructed that this does not reduce the importance of adhering to diet (See WARNINGS and PRECAUTIONS).",
"Description": "Fenofibrate Capsules, USP are a lipid regulating agent available as capsules for oral administration. Each capsule contains 67 mg, 134 mg or 200 mg of micronized fenofibrate. The chemical name for fenofibrate is Isopropyl 2-[4-(4-chlorobenzoyl)phenoxy]-2- methyl-propanoic acid, 1-methylethyl ester with the following structural formula. The empirical formula is C20H21O4Cl and the molecular weight is 360.83; fenofibrate is very soluble in methylene chloride, slightly soluble in alcohol and practically insoluble in water. The melting point is 79 to 82°C. Fenofibrate is a white or almost white, crystalline powder which is stable under ordinary conditions. For 200 mg strength: Meets USP Dissolution Test 6. Inactive Ingredients: Each capsule contains colloidal silicon dioxide, crospovidone type B, lactose monohydrate, magnesium stearate, pregelatinized starch (modified corn starch), sodium lauryl sulphate and sodium stearyl fumarate. Ingredients of capsule shells: Each capsule contains FD & C Red 40, FD & C Blue 1, Gelatin, Iron Oxide Red, Iron Oxide Yellow, Polyethylene Glycol, Sodium Lauryl Sulphate, Titanium Dioxide. Ingredients of printing ink: Black iron oxide-E172, Potassium hydroxide-E525, Propylene glycol-E1520 and Shellac-E904."
},
{
"NDCCode": "21695-439-05",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (21695-439-05) > 5 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "21695-0439-05",
"ProductNDC": "21695-439",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ofloxacin",
"NonProprietaryName": "Ofloxacin",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20040514",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076622",
"LabelerName": "Rebel Distributors Corp",
"SubstanceName": "OFLOXACIN",
"StrengthNumber": "3",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Quinolone Antimicrobial [EPC],Quinolones [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Ofloxacin ophthalmic solution is indicated for the treatment of infections caused by susceptible strains of the following bacteria in the conditions listed below. CONJUNCTIVITIS. Gram-positive bacteria:. Staphylococcus aureus Staphylococcus epidermidis Streptococcus pneumoniae. Gram-negative bacteria. Enterobacter cloacaeHaemophilus influenzaeProteus mirabilisPseudomonas aeruginosa. CORNEAL ULCERS. Gram-positive bacteria:. Staphylococcus aureus Staphylococcus epidermidis Streptococcus pneumoniae. Gram-negative bacteria. Pseudomonas aeruginosaSerratia marcescens*. Anaerobic species. Propionibacterium acnes. *Efficacy for this organism was studied in fewer than 10 infections.",
"Description": "Ofloxacin Ophthalmic Solution 0.3% is a sterile ophthalmic solution. It is a fluorinated carboxyquinolone anti-infective for topical ophthalmic use. C18H20FN3O4. Mol. Wt. 361.37. Chemical Name. (±)-9-Fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4 benzoxazine-6-carboxylic acid. Each mL Contains: Active:ofloxacin 0.3% (3 mg/mL). Preservative Added:benzalkonium chloride (0.005%). Inactives: sodium chloride and purified water. Hydrochloric Acid and/or Sodium Hydroxide may be added to adjust pH. Ofloxacin ophthalmic solution is unbuffered and formulated with a pH of 6.4 (range - 6.0 to 6.8). It has an osmolality of 300 mOsm/kg. Ofloxacin is a fluorinated 4-quinolone which differs from other fluorinated 4-quinolones in that there is a six member (pyridobenzoxazine) ring from positions 1 to 8 of the basic ring structure."
},
{
"NDCCode": "49643-439-05",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (49643-439-05) ",
"NDC11Code": "49643-0439-05",
"ProductNDC": "49643-439",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Shad Scale Pollen",
"NonProprietaryName": "Atriplex Confertifolia",
"DosageFormName": "INJECTION",
"RouteName": "CUTANEOUS; INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740312",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102211",
"LabelerName": "Allermed Laboratories, Inc.",
"SubstanceName": "ATRIPLEX CONFERTIFOLIA POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19740312",
"SamplePackage": "N",
"IndicationAndUsage": "Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.",
"Description": "Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength."
},
{
"NDCCode": "55111-439-05",
"PackageDescription": "500 CAPSULE in 1 BOTTLE (55111-439-05) ",
"NDC11Code": "55111-0439-05",
"ProductNDC": "55111-439",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ramipril",
"NonProprietaryName": "Ramipril",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20080618",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078191",
"LabelerName": "Dr. Reddy's Laboratories Limited",
"SubstanceName": "RAMIPRIL",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-01-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20080618",
"SamplePackage": "N"
},
{
"NDCCode": "67877-439-05",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (67877-439-05) ",
"NDC11Code": "67877-0439-05",
"ProductNDC": "67877-439",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rosuvastatin Calcium",
"NonProprietaryName": "Rosuvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170321",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206465",
"LabelerName": "Ascend Laboratories, LLC",
"SubstanceName": "ROSUVASTATIN CALCIUM",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-12-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170321",
"SamplePackage": "N",
"IndicationAndUsage": "Rosuvastatin tablets is indicated: : 1 To reduce the risk of major adverse cardiovascular (CV) events (CV death, nonfatal myocardial infarction, nonfatal stroke, or an arterial revascularization procedure) in adults without established coronary heart disease who are at increased risk of CV disease based on age, high-sensitivity C-reactive protein (hsCRP) ≥2 mg/L, and at least one additional CV risk factor., 2 As an adjunct to diet to: .",
"Description": "Rosuvastatin is a 3-hydroxy-3-methylglutaryl coenzyme A (HMG CoA)-reductase inhibitor. The chemical name for rosuvastatin calcium is bis[(E)-7-[4-(4-fluorophenyl)-6-isopropyl-2- [methyl(methylsulfonyl)amino] pyrimidin-5-yl](3R,5S)-3,5-dihydroxyhept-6-enoic acid] calcium salt with the following structural formula. The empirical formula for rosuvastatin calcium is (C22H27FN3O6S)2Ca and the molecular weight is 1001.14. Rosuvastatin calcium is a off -white to light yellow coloured powder that is soluble in N,N-Dimethyl formamide, acetone and acetonitrile and insoluble in water. Rosuvastatin calcium is a hydrophilic compound with a partition coefficient (octanol/water) of 0.13 at pH of 7.0. Rosuvastatin tablets for oral use contain rosuvastatin 5 mg, 10 mg, 20 mg, or 40 mg (equivalent to 5.2 mg, 10.4 mg, 20.8 mg, and 41.6 mg rosuvastatin calcium) and the following inactive ingredients: Each tablet contains: crospovidone, magnesium oxide, microcrystalline cellulose, lactose monohydrate, magnesium stearate, hypromellose, triacetin, iron oxide red, iron oxide yellow (5 mg), and titanium dioxide. Meets USP Dissolution Test 2."
},
{
"NDCCode": "68382-439-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (68382-439-05) ",
"NDC11Code": "68382-0439-05",
"ProductNDC": "68382-439",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aripiprazole",
"NonProprietaryName": "Aripiprazole",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190604",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090472",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "ARIPIPRAZOLE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190604",
"SamplePackage": "N",
"IndicationAndUsage": "Aripiprazole is an atypical antipsychotic. The oral formulation is indicated for: 1 Schizophrenia (14.1), 2 Irritability Associated with Autistic Disorder (14.4), 3 Treatment of Tourette's disorder (14.5).",
"Description": "Aripiprazole is an atypical antipsychotic drug that is available as tablets. Aripiprazole is 7-[4-[4-(2,3-dichlorophenyl)-1- piperazinyl]butoxy]-3,4-dihydrocarbostyril. The molecular formula is C23H27Cl2N3O2 and its molecular weight is 448.39. The chemical structure is. Each aripiprazole tablet intended for oral administration contains 2 mg or 5 mg or 10 mg or 15 mg or 20 mg or 30 mg of aripiprazole, USP. In addition, each tablet contains the following inactive ingredients: aspartame, calcium stearate, crospovidone and mannitol. Each tablet except 2 mg strength also contains flavor firmenich powder peppermint. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "68428-439-05",
"PackageDescription": "150 PELLET in 1 VIAL, GLASS (68428-439-05) ",
"NDC11Code": "68428-0439-05",
"ProductNDC": "68428-439",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Inula Helenium",
"NonProprietaryName": "Inula Helenium Root",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100203",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "INULA HELENIUM ROOT",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/1",
"Status": "Deprecated",
"LastUpdate": "2020-12-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20100203",
"SamplePackage": "N"
},
{
"NDCCode": "84756-439-05",
"PackageDescription": "100 g in 1 BOX (84756-439-05) ",
"NDC11Code": "84756-0439-05",
"ProductNDC": "84756-439",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Water Gel Cream",
"NonProprietaryName": "Water Gel Cream",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20241124",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M016",
"LabelerName": "Yiwu Xinqian E Commerce Co Ltd",
"SubstanceName": "NIACINAMIDE",
"StrengthNumber": "5",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20241124",
"SamplePackage": "N",
"IndicationAndUsage": "Apply twice daly(moring and night as a man and once as a woman.Afer apicaion, proeed with an acive masage for 3-5 minutes unthe product is fuy absorbed."
},
{
"NDCCode": "84827-439-05",
"PackageDescription": "100 g in 1 BOX (84827-439-05) ",
"NDC11Code": "84827-0439-05",
"ProductNDC": "84827-439",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Trstay V-face",
"NonProprietaryName": "Trstay V-face",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20241106",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M016",
"LabelerName": "Yiwu Xinqian E Commerce Co Ltd",
"SubstanceName": "NIACINAMIDE",
"StrengthNumber": "5",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20241106",
"SamplePackage": "N",
"IndicationAndUsage": "Apply twice daly(moring and night as a man and once as a woman.Afer apicaion, proeed with an acive masage for 3-5 minutes unthe product is fuy absorbed."
},
{
"NDCCode": "71288-100-05",
"PackageDescription": "1 VIAL in 1 CARTON (71288-100-05) > 5 mL in 1 VIAL",
"NDC11Code": "71288-0100-05",
"ProductNDC": "71288-100",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carboplatin",
"NonProprietaryName": "Carboplatin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170619",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077096",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "CARBOPLATIN",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Platinum-based Drug [EPC], Platinum-containing Compounds [EXT]",
"Status": "Deprecated",
"LastUpdate": "2022-12-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20170619",
"SamplePackage": "N"
},
{
"NDCCode": "71288-108-06",
"PackageDescription": "5 VIAL, SINGLE-DOSE in 1 CARTON (71288-108-06) > 5 mL in 1 VIAL, SINGLE-DOSE (71288-108-05) ",
"NDC11Code": "71288-0108-06",
"ProductNDC": "71288-108",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cytarabine",
"NonProprietaryName": "Cytarabine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRATHECAL; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20200626",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206189",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "CYTARABINE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2022-01-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200626",
"SamplePackage": "N",
"IndicationAndUsage": "Cytarabine Injection in combination with other approved anti-cancer drugs is indicated for remission induction in acute non-lymphocytic leukemia of adults and pediatric patients. It has also been found useful in the treatment of acute lymphocytic leukemia and the blast phase of chronic myelocytic leukemia. Intrathecal administration of Cytarabine Injection (preservative free preparations only) is indicated in the prophylaxis and treatment of meningeal leukemia.",
"Description": "Cytarabine Injection 100 mg per 5 mL (20 mg per mL), an antineoplastic, is a sterile solution of cytarabine for intravenous, intrathecal or subcutaneous administration. Each mL contains 20 mg Cytarabine, USP (20 mg per mL) in a single dose vial (100 mg per 5 mL). Cytarabine Injection 100 mg per 5 mL is a sterile solution for intravenous, intrathecal or subcutaneous administration. Each mL contains 20 mg Cytarabine, USP, and the following inactive ingredients: sodium chloride 6.8 mg and Water for Injection q.s. When necessary the pH is adjusted with hydrochloric acid and/or sodium hydroxide to a pH of 7.4. Each vial contains approximately 0.58 mEq sodium. Cytarabine is chemically 1-β-D-Arabinofuranosylcytosine. The structural formula is:. Cytarabine is an odorless, white to off-white crystalline powder which is freely soluble in water and slightly soluble in alcohol and in chloroform."
},
{
"NDCCode": "71288-156-05",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (71288-156-05) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "71288-0156-05",
"ProductNDC": "71288-156",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Thiotepa",
"NonProprietaryName": "Thiotepa",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRACAVITARY; INTRAVENOUS; INTRAVESICAL",
"StartMarketingDate": "20231226",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216037",
"LabelerName": "Meitheal Pharmaceuticals Inc",
"SubstanceName": "THIOTEPA",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Alkylating Activity [MoA], Alkylating Drug [EPC]",
"Status": "Active",
"LastUpdate": "2023-12-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231226",
"SamplePackage": "N",
"IndicationAndUsage": "Thiotepa for Injection is an alkylating drug indicated: 1 For treatment of adenocarcinoma of the breast or ovary. (1.2), 2 For controlling intracavitary effusions secondary to diffuse or localized neoplastic diseases of various serosal cavities. (1.3), 3 For treatment of superficial papillary carcinoma of the urinary bladder. (1.4).",
"Description": "Thiotepa for Injection, USP is an alkylating agent. Thiotepa for Injection, USP is supplied as a nonpyrogenic, sterile, white lyophilized powder or lyophilized cake for intravenous, intracavitary, or intravesical use after reconstitution and dilution. Thiotepa for Injection, USP is available in a single-dose vial containing: 1 15 mg thiotepa. After reconstitution with 1.5 mL of water for injection, each mL contains 10 mg thiotepa., 2 100 mg thiotepa. After reconstitution with 10 mL of water for injection, each mL contains 10 mg thiotepa."
},
{
"NDCCode": "71288-175-05",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (71288-175-05) / 5 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "71288-0175-05",
"ProductNDC": "71288-175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Etoposide",
"NonProprietaryName": "Etoposide",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074529",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "ETOPOSIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Topoisomerase Inhibitor [EPC], Topoisomerase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-12-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250201",
"SamplePackage": "N",
"IndicationAndUsage": "Etoposide Injection is indicated in the management of the following neoplasms.",
"Description": "Etoposide Injection, USP (also commonly known as VP-16) is a semisynthetic derivative of podophyllotoxin used in the treatment of certain neoplastic diseases. It is 4'-demethylepipodophyllotoxin 9-[4,6-0-(R)-ethylidene-β-D-glucopyranoside]. It is very soluble in methanol and chloroform, slightly soluble in ethanol, and sparingly soluble in water and ether. It is made more miscible with water by means of organic solvents. Etoposide Injection, USP is available for intravenous use as a sterile 20 mg per mL solution in 100 mg (5 mL), 500 mg (25 mL), or 1 g (50 mL) sterile, multiple dose vials. The pH of the clear, colorless to yellow solution is 3.0 to 4.0. Each mL contains: 20 mg etoposide, USP, 2 mg citric acid anhydrous, 80 mg polysorbate 80, 650 mg polyethylene glycol 300 (57.5% v/v and 65.0% w/v), and 262 mg dehydrated alcohol (33.2% v/v and 26.2% w/v). The structural formula is."
},
{
"NDCCode": "71288-182-05",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (71288-182-05) / 4 mL in 1 VIAL, SINGLE-DOSE (71288-182-04) ",
"NDC11Code": "71288-0182-05",
"ProductNDC": "71288-182",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Daunorubicin Hydrochloride",
"NonProprietaryName": "Daunorubicin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065035",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "DAUNORUBICIN HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250601",
"SamplePackage": "N",
"IndicationAndUsage": "Daunorubicin hydrochloride injection in combination with other approved anticancer drugs is indicated for remission induction in acute nonlymphocytic leukemia (myelogenous, monocytic, erythroid) of adults and for remission induction in acute lymphocytic leukemia of children and adults.",
"Description": "Daunorubicin Hydrochloride Injection consists of the hydrochloride salt of an anthracycline cytotoxic antibiotic produced by a strain of Streptomyces coeruleorubidus. It is provided as a deep red sterile liquid in vials for intravenous administration only. Each mL contains daunorubicin hydrochloride, USP equivalent to 5 mg of daunorubicin, 9 mg sodium chloride, hydrochloric acid (to adjust pH), and water for injection, q.s. It has the following structural formula which may be described with the chemical name of (1S,3S)-3-Acetyl-1,2,3,4,6,11-hexahydro-3,5,12-trihydroxy-10-methoxy-6,11-dioxo-1-naphthacenyl 3-amino-2,3,6-trideoxy-α-L-lyxo-hexopyranoside hydrochloride. C27H29NO10HCl M.W. 563.99. It is a hygroscopic crystalline powder. The pH of a 5 mg/mL aqueous solution is 3 to 4."
},
{
"NDCCode": "71288-184-05",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (71288-184-05) / 5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "71288-0184-05",
"ProductNDC": "71288-184",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Idarubicin Hydrochloride",
"NonProprietaryName": "Idarubicin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065036",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "IDARUBICIN HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250601",
"SamplePackage": "N",
"IndicationAndUsage": "Idarubicin Hydrochloride Injection in combination with other approved antileukemic drugs is indicated for the treatment of acute myeloid leukemia (AML) in adults. This includes French-American-British (FAB) classifications M1 through M7.",
"Description": "Idarubicin Hydrochloride Injection, USP contains idarubicin hydrochloride, USP and is a sterile, semi-synthetic, preservative-free solution (PFS) antineoplastic anthracycline for intravenous use. Chemically, idarubicin hydrochloride, USP is 5, 12-Naphthacenedione, 9-acetyl-7-[(3-amino-2,3,6-trideoxy-α-L-lyxo-hexopyranosyl)oxy]-7,8,9,10-tetrahydro-6,9,11-trihydroxyhydrochloride, (7S-cis). The structural formula is as follows. C26H27NO9HCl M.W. 533.95. Idarubicin Hydrochloride Injection, USP is a sterile, clear, orange-red, isotonic parenteral preservative-free solution, available in 5 mL (5 mg), 10 mL (10 mg) and 20 mL (20 mg) single-dose-only vials. Each mL contains idarubicin hydrochloride USP, 1 mg (equivalent to 0.93 mg idarubicin free base) and the following inactive ingredients: glycerin USP, 25 mg and q.s. water for injection, USP. Hydrochloric acid and/or sodium hydroxide is used to adjust pH to a target of 3.5."
},
{
"NDCCode": "71288-203-05",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (71288-203-05) / 4 mL in 1 VIAL, SINGLE-DOSE (71288-203-04) ",
"NDC11Code": "71288-0203-05",
"ProductNDC": "71288-203",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Furosemide",
"NonProprietaryName": "Furosemide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20220127",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212803",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "FUROSEMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220127",
"SamplePackage": "N",
"IndicationAndUsage": "Parenteral therapy should be reserved for patients unable to take oral medication or for patients in emergency clinical situations.",
"Description": "Furosemide is a diuretic which is an anthranilic acid derivative. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide Injection, USP 10 mg per mL is a sterile, nonpyrogenic solution in vials for intravenous and intramuscular injection. Furosemide is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, sparingly soluble in alcohol, freely soluble in dilute alkali solutions and insoluble in dilute acids. The structural formula is as follows. Each mL contains: Furosemide 10 mg, Water for Injection q.s., Sodium Chloride for isotonicity, Sodium Hydroxide and, if necessary, Hydrochloric Acid to adjust pH between 8.0 and 9.3."
},
{
"NDCCode": "71288-404-05",
"PackageDescription": "25 VIAL, MULTI-DOSE in 1 CARTON (71288-404-05) / 4 mL in 1 VIAL, MULTI-DOSE (71288-404-04) ",
"NDC11Code": "71288-0404-05",
"ProductNDC": "71288-404",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Heparin Sodium",
"NonProprietaryName": "Heparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20190615",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211007",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "HEPARIN SODIUM",
"StrengthNumber": "10000",
"StrengthUnit": "[USP'U]/mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2025-09-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190615",
"SamplePackage": "N",
"IndicationAndUsage": "Heparin Sodium Injection is indicated for: 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism;, 2 Prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease;, 3 Atrial fibrillation with embolization;, 4 Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);, 5 Prevention of clotting in arterial and cardiac surgery;, 6 Prophylaxis and treatment of peripheral arterial embolism., 7 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures.",
"Description": "Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, possessing anticoagulant properties. It is composed of polymers of alternating derivations of α-D-glucosamido (N-sulfated O-sulfated or N-acetylated) and O-sulfated uronic acid (α-L-iduronic acid or β-D-glucoronic acid). Structure of heparin sodium (representative subunits). Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Heparin Sodium Injection, USP preserved with Benzyl Alcohol is available in the following concentrations per mL. pH 5.0-7.5; sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment."
},
{
"NDCCode": "71288-408-06",
"PackageDescription": "25 VIAL, MULTI-DOSE in 1 CARTON (71288-408-06) > 5 mL in 1 VIAL, MULTI-DOSE (71288-408-05) ",
"NDC11Code": "71288-0408-06",
"ProductNDC": "71288-408",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glycopyrrolate",
"NonProprietaryName": "Glycopyrrolate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190515",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211705",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "GLYCOPYRROLATE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-10-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190515",
"EndMarketingDatePackage": "20231030",
"SamplePackage": "N",
"IndicationAndUsage": "Glycopyrrolate Injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, Glycopyrrolate Injection may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants.",
"Description": "Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains. Glycopyrrolate, USP 0.2 mg. Water for Injection, USP q.s. Benzyl Alcohol, NF 0.9% (preservative). pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.33. Its structural formula is as follows. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection, USP is a clear, colorless, sterile liquid; pH 2.0 – 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P = -1.52) at ambient room temperature (24°C)."
},
{
"NDCCode": "71288-409-05",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (71288-409-05) / 5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "71288-0409-05",
"ProductNDC": "71288-409",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Palonosetron Hydrochloride",
"NonProprietaryName": "Palonosetron Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230814",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215861",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "PALONOSETRON HYDROCHLORIDE",
"StrengthNumber": ".25",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2023-08-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230814",
"SamplePackage": "N",
"IndicationAndUsage": "Palonosetron Hydrochloride Injection is a serotonin-3 (5-HT3) receptor antagonist indicated in. Adults for prevention of: 1 acute and delayed nausea and vomiting associated with initial and repeat courses of moderately emetogenic cancer chemotherapy (MEC). (1), 2 acute nausea and vomiting associated with initial and repeat courses of highly emetogenic cancer chemotherapy (HEC). (1), 3 postoperative nausea and vomiting (PONV) for up to 24 hours following surgery. Efficacy beyond 24 hours has not been demonstrated (1).",
"Description": "Palonosetron Hydrochloride Injection contains palonosetron as palonosetron hydrochloride, an antiemetic and antinauseant agent. It is a serotonin-3 (5-HT3) receptor antagonist with a strong binding affinity for this receptor. Chemically, palonosetron hydrochloride is: (3aS)-2-[(S)-1-Azabicyclo [2.2.2]oct-3-yl]-2,3,3a,4,5,6-hexahydro-1-oxo-1Hbenz[de]isoquinoline hydrochloride. The empirical formula is C19H24N2O.HCl, with a molecular weight of 332.87. Palonosetron hydrochloride exists as a single isomer and has the following structural formula. Palonosetron hydrochloride is a white to off-white crystalline powder. It is freely soluble in water, soluble in propylene glycol, and slightly soluble in ethanol and 2-propanol. Palonosetron Hydrochloride Injection is a sterile, clear, colorless, nonpyrogenic, isotonic, buffered solution for intravenous administration. Palonosetron Hydrochloride Injection is available as a 5 mL single-dose vial. Each 5 mL vial contains: 0.25 mg palonosetron (equivalent to 0.28 mg palonosetron hydrochloride), 207.5 mg mannitol, USP, edetate disodium dihydrate, USP, and citrate and citric acid buffers in water for intravenous administration. Hydrochloric acid, NF or sodium hydroxide, NF may have been added to adjust the pH of the solution to 4.5 to 5.5."
},
{
"NDCCode": "71288-415-06",
"PackageDescription": "25 VIAL, MULTI-DOSE in 1 CARTON (71288-415-06) / 5 mL in 1 VIAL, MULTI-DOSE (71288-415-05) ",
"NDC11Code": "71288-0415-06",
"ProductNDC": "71288-415",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glycopyrrolate",
"NonProprietaryName": "Glycopyrrolate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20210706",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212802",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "GLYCOPYRROLATE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210706",
"SamplePackage": "N",
"IndicationAndUsage": "Glycopyrrolate Injection is an anticholinergic indicated. in anesthesia (adult and pediatric patients): 1 for reduction of salivary, tracheobronchial, and pharyngeal secretions, reduction of volume and acidity of gastric secretions, and blockade of cardiac inhibitory reflexes during induction of anesthesia and intubation., 2 intraoperatively to counteract surgically or drug-induced or vagal reflex-associated arrhythmias., 3 for protection against peripheral muscarinic effects of cholinergic agents. (1).",
"Description": "Glycopyrrolate is a synthetic anticholinergic agent. It is a quaternary ammonium salt with the following chemical name. 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.34. Its structural formula is as follows. C19H28BrNO3 398.34. Glycopyrrolate occurs as a white, odorless, crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. It is completely ionized at physiological pH values. Glycopyrrolate Injection, USP is a clear, colorless, sterile liquid with a pH of 2.0 to 3.0. The partition coefficient of glycopyrrolate in n-octanol/water system is 0.304 (log10 P = -1.52) at ambient room temperature (24°C). Glycopyrrolate Injection, USP is intended for intramuscular or intravenous administration. Each 1 mL contains 0.2 mg of glycopyrrolate, water for injection, and hydrochloric acid or sodium hydroxide as pH adjusters."
},
{
"NDCCode": "71288-504-05",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (71288-504-05) / 5 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "71288-0504-05",
"ProductNDC": "71288-504",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Haloperidol Decanoate",
"NonProprietaryName": "Haloperidol Decanoate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20210726",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214507",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "HALOPERIDOL DECANOATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Typical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210726",
"SamplePackage": "N",
"IndicationAndUsage": "Haloperidol Decanoate Injection is indicated for the treatment of schizophrenia in adults who were previously taking a stable dosage of an immediate-release oral haloperidol product.",
"Description": "Haloperidol Decanoate Injection is the decanoate ester of haloperidol, for intramuscular use. Haloperidol is a typical antipsychotic. The structural formula of haloperidol decanoate is 4-(4-chlorophenyl)-1-[4-(4-fluorophenyl)-4-oxobutyl] piperidin-4-yl decanoate. The molecular formula is C31H41CIFNO3 and has a molecular weight of 530.12. Haloperidol decanoate is almost insoluble in water (0.01 mg/mL) but is soluble in most organic solvents. Each mL of Haloperidol Decanoate Injection contains: 1 50 mg of haloperidol (present as 70.52 mg of haloperidol decanoate) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative., 2 100 mg of haloperidol (present as 141.04 mg of haloperidol decanoate) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative."
},
{
"NDCCode": "71288-700-06",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 CARTON (71288-700-06) / 5 mL in 1 VIAL, MULTI-DOSE (71288-700-05) ",
"NDC11Code": "71288-0700-06",
"ProductNDC": "71288-700",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rocuronium Bromide",
"NonProprietaryName": "Rocuronium Bromide",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230508",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213453",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "ROCURONIUM BROMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2023-05-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230508",
"SamplePackage": "N",
"IndicationAndUsage": "Rocuronium Bromide Injection is indicated for inpatients and outpatients as an adjunct to general anesthesia to facilitate both rapid sequence and routine tracheal intubation, and to provide skeletal muscle relaxation during surgery or mechanical ventilation.",
"Description": "Rocuronium Bromide Injection is a nondepolarizing neuromuscular blocking agent with a rapid to intermediate onset depending on dose and intermediate duration. Rocuronium bromide is chemically designated as 1-[17β-(acetyloxy)-3α-hydroxy-2β-(4-morpholinyl)-5α-androstan-16β-yl]-1-(2-propenyl)pyrrolidinium bromide. The structural formula is. The chemical formula is C32H53BrN2O4 with a molecular weight of 609.70. The partition coefficient of rocuronium bromide in n-octanol/water is 0.5 at 20°C. Rocuronium Bromide Injection is supplied as a sterile, nonpyrogenic, isotonic solution that is clear, colorless to yellow, for intravenous injection only. Each mL contains 10 mg rocuronium bromide and 2 mg sodium acetate trihydrate. The aqueous solution is adjusted to isotonicity with sodium chloride (3.3 mg per mL) and to a pH of 4 with glacial acetic acid and/or sodium hydroxide."
},
{
"NDCCode": "71288-701-05",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (71288-701-05) / 5 mL in 1 VIAL, SINGLE-DOSE (71288-701-06) ",
"NDC11Code": "71288-0701-05",
"ProductNDC": "71288-701",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atracurium Besylate",
"NonProprietaryName": "Atracurium Besylate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180515",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091488",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "ATRACURIUM BESYLATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2024-12-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180515",
"SamplePackage": "N",
"IndicationAndUsage": "Atracurium besylate injection is indicated, as an adjunct to general anesthesia, to facilitate endotracheal intubation and to provide skeletal muscle relaxation during surgery or mechanical ventilation.",
"Description": "Atracurium besylate is an intermediate-duration, nondepolarizing, skeletal muscle relaxant for intravenous administration. Atracurium besylate is designated as 2-(2-Carboxyethyl)-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methyl-1-veratrylisoquinolinium benzenesulfonate, pentamethylene ester. It has a molecular weight of 1243.49, and its molecular formula is C65H82N2O18S2. The structural formula is. Atracurium besylate is a complex molecule containing four sites at which different stereochemical configurations can occur. The symmetry of the molecule, however, results in only ten, instead of sixteen, possible different isomers. The manufacture of atracurium besylate results in these isomers being produced in unequal amounts but with a consistent ratio. Those molecules in which the methyl group attached to the quaternary nitrogen projects on the opposite side to the adjacent substituted-benzyl moiety predominate by approximately 3:1. Atracurium Besylate Injection, USP is a sterile, non-pyrogenic aqueous solution. Each mL contains 10 mg atracurium besylate. The pH is adjusted to 3.25 to 3.65 with benzenesulfonic acid. The multiple dose vial contains 0.9% benzyl alcohol added as a preservative. Atracurium besylate injection slowly loses potency with time at the rate of approximately 6% per year under refrigeration (5°C). Atracurium besylate injection should be refrigerated at 2° to 8°C (36° to 46°F) to preserve potency. Rate of loss in potency increases to approximately 5% per month at 25°C (77°F). Upon removal from refrigeration to room temperature storage conditions (25°C / 77°F), use atracurium besylate injection within 14 days even if re-refrigerated."
},
{
"NDCCode": "71288-712-06",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (71288-712-06) / 5 mL in 1 VIAL, SINGLE-DOSE (71288-712-05) ",
"NDC11Code": "71288-0712-06",
"ProductNDC": "71288-712",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cisatracurium Besylate",
"NonProprietaryName": "Cisatracurium Besylate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20191031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211668",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "CISATRACURIUM BESYLATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2023-02-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191031",
"SamplePackage": "N",
"IndicationAndUsage": "Cisatracurium Besylate Injection is indicated: : 1 as an adjunct to general anesthesia to facilitate tracheal intubation in adults and in pediatric patients 1 month to 12 years of age , 2 to provide skeletal muscle relaxation in adults during surgical procedures or during mechanical ventilation in the ICU , 3 to provide skeletal muscle relaxation during surgical procedures via infusion in pediatric patients 2 years and older .",
"Description": "Cisatracurium besylate is a nondepolarizing skeletal neuromuscular blocker for intravenous administration. Compared to other neuromuscular blockers, it is intermediate in its onset and duration of action. Cisatracurium Besylate Injection, USP contains cisatracurium besylate as the active pharmaceutical ingredient. Cisatracurium besylate is one of 10 isomers of atracurium besylate and constitutes approximately 15% of that mixture. Cisatracurium besylate is [1R-[1α,2α(1'R*,2'R*)]]-2,2'-[1,5-pentanediylbis[oxy(3-oxo-3,1-propanediyl)]]bis[1-[(3,4-dimethoxyphenyl)methyl]-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methylisoquinolinium] dibenzenesulfonate. The molecular formula of the cisatracurium parent bis-cation is C53H72N2O12 and the molecular weight is 929.2. The molecular formula of cisatracurium as the besylate salt is C65H82N2O18S2 and the molecular weight is 1243.48. The structural formula of cisatracurium besylate is. The log of the partition coefficient of cisatracurium besylate is -2.12 in a 1-octanol/distilled water system at 25°C. Cisatracurium Besylate Injection, USP is a sterile, nonpyrogenic aqueous solution. Each mL in the single-dose vials contains either 2 mg or 10 mg of cisatracurium (equivalent to 2.68 mg and 13.38 mg of cisatracurium besylate; respectively), and benzenesulfonic acid as pH adjuster in water for injection. Each mL in the multi-dose vials contains 2 mg of cisatracurium (equivalent to 2.68 mg of cisatracurium besylate), benzenesulfonic acid as pH adjuster, and also contains 9 mg of benzyl alcohol as preservative, in water for injection. The pH of Cisatracurium Besylate Injection, USP is between 3.0 and 3.8."
},
{
"NDCCode": "71288-805-06",
"PackageDescription": "6 VIAL, SINGLE-DOSE in 1 CARTON (71288-805-06) > 5 mL in 1 VIAL, SINGLE-DOSE (71288-805-05) ",
"NDC11Code": "71288-0805-06",
"ProductNDC": "71288-805",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isosulfan Blue",
"NonProprietaryName": "Isosulfan Blue",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20211103",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213130",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "ISOSULFAN BLUE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2021-11-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20211103",
"SamplePackage": "N",
"IndicationAndUsage": "Isosulfan Blue Injection 1% upon subcutaneous administration, delineates the lymphatic vessels draining the region of injection. It is an adjunct to lymphography in: primary and secondary lymphedema of the extremities; chyluria, chylous ascites or chylothorax; lymph node involvement by primary or secondary neoplasm; lymph node response to therapeutic modalities (1.1).",
"Description": "The chemical name of Isosulfan Blue Injection 1% is N-[4-[[4-(diethylamino)phenyl] (2,5- disulfophenyl) methylene]-2,5-cyclohexadien-1-ylidene]-N-ethylethanaminium hydroxide, inner salt, sodium salt. Its structural formula is. Isosulfan Blue Injection 1% is a sterile aqueous solution for subcutaneous administration. Phosphate buffer in sterile, nonpyrogenic water is added in sufficient quantity to yield a final pH of 6.8 to 7.4. Each mL of solution contains 10 mg isosulfan blue, 6.6 mg dibasic sodium phosphate, anhydrous and 2.7 mg monobasic potassium phosphate. The solution contains no preservative. Isosulfan Blue Injection 1% is a contrast agent for the delineation of lymphatic vessels."
},
{
"NDCCode": "71288-033-75",
"PackageDescription": "1 BOTTLE in 1 CARTON (71288-033-75) / 1 INJECTION, POWDER, FOR SOLUTION in 1 BOTTLE",
"NDC11Code": "71288-0033-75",
"ProductNDC": "71288-033",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin And Sulbactam",
"NonProprietaryName": "Ampicillin Sodium And Sulbactam Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20061127",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065403",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "AMPICILLIN SODIUM; SULBACTAM SODIUM",
"StrengthNumber": "10; 5",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-08-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20061127",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin and Sulbactam for Injection is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below.",
"Description": "Ampicillin and Sulbactam for Injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium issodium penicillinate sulfone; sodium (2S,5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection, USP is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions. The pH of the solutions is between 8 and 10. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 15 g sterile Pharmacy Bulk Package contains ampicillin 10 g and sulbactam 5 g (equivalent to 10.629 g ampicillin sodium and 5.470 g sulbactam sodium). Each sterile Pharmacy Bulk Package contains approximately 1150 mg of sodium. Ampicillin and Sulbactam for Injection, USP Pharmacy Bulk Package is a bottle containing a sterile preparation for parenteral use. The Pharmacy Bulk Package is for use in a pharmacy admixture setting; it provides many single doses of Ampicillin and Sulbactam for Injection, USP for additionto suitable parenteral fluids in the preparation of admixtures for intravenous infusion. (See DIRECTIONS FOR USE - Directions for Proper Use of Pharmacy Bulk Package section). FURTHER DILUTION IS REQUIRED BEFORE USE."
},
{
"NDCCode": "71288-034-50",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (71288-034-50) / 25 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "71288-0034-50",
"ProductNDC": "71288-034",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dalbavancin",
"NonProprietaryName": "Dalbavancin",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20251126",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218929",
"LabelerName": "Meitheal Pharmaceuticals Inc",
"SubstanceName": "DALBAVANCIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/25mL",
"Pharm_Classes": "Lipoglycopeptide Antibacterial [EPC], Lipoglycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2025-12-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251126",
"SamplePackage": "N",
"IndicationAndUsage": "Dalbavancin for Injection is a lipoglycopeptide antibacterial indicated for the treatment of adult and pediatric patients with acute bacterial skin and skin structure infections (ABSSSI) caused by designated susceptible strains of Gram-positive microorganisms. (1.1). To reduce the development of drug-resistant bacteria and maintain the effectiveness of Dalbavancin for Injection and other antibacterial drugs, Dalbavancin for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. (1.2).",
"Description": "Dalbavancin for Injection is a lipoglycopeptide antibacterial synthesized from a fermentation product of Nonomuraea species. Dalbavancin is a mixture of five closely related active homologs (A0, A1, B0, B1, and B2); the component B0 is the major component of dalbavancin. The homologs share the same core structure and differ in the fatty acid side chain of the N-acylaminoglucuronic acid moiety (R1) structure and/or the presence of an additional methyl group (R2) on the terminal amino group (shown in the Figure 1 and Table 3 below). Figure 1. Dalbavancin Structural Formula. *Anhydrous free base. The B0 INN chemical name is: 5,31-dichloro-38-de(methoxycarbonyl)-7-demethyl-19-deoxy-56-O-[2-deoxy-2-[(10-methylundecanoyl)amino]-β-D-glucopyranuronosyl]-38-[[3-(dimethylamino)propyl] carbamoyl]-42-O-α-D-mannopyranosyl-15-N-methyl(ristomycin A aglycone) hydrochloride. Dalbavancin for Injection is supplied in clear glass vials as a sterile, lyophilized, preservative-free, white to off-white to pale yellow solid. Each vial contains dalbavancin HCl equivalent to 500 mg of dalbavancin as the free base, plus lactose monohydrate (129 mg) and mannitol (129 mg) as excipients. Sodium hydroxide or hydrochloric acid may be added to adjust the pH at the time of manufacture. The powder is to be reconstituted and further diluted for IV infusion [see Dosage and Administration (2.4), How Supplied/Storage and Handling (16)]."
},
{
"NDCCode": "71288-102-10",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (71288-102-10) / 5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "71288-0102-10",
"ProductNDC": "71288-102",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bendamustine",
"NonProprietaryName": "Bendamustine Hcl",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230605",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211001",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "BENDAMUSTINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Alkylating Activity [MoA], Alkylating Drug [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230605",
"SamplePackage": "N",
"IndicationAndUsage": "Bendamustine Hydrochloride for Injection is an alkylating drug indicated for treatment of patients with: : 1 Chronic lymphocytic leukemia (CLL). Efficacy relative to first line therapies other than chlorambucil has not been established. (1.1) , 2 Indolent B-cell non-Hodgkin lymphoma (NHL) that has progressed during or within six months of treatment with rituximab or a rituximab-containing regimen. (1.2) .",
"Description": "Bendamustine hydrochloride is an alkylating agent. The chemical name of bendamustine hydrochloride monohydrate is 1H-benzimidazole-2-butanoic acid, 5-[bis(2-chloroethyl)amino]-1 methyl-, monohydrochloride monohydrate. Its empirical molecular formula is C16H21Cl2N3O2 · HCl · H2O, and the molecular weight is 412.7. Bendamustine hydrochloride monohydrate contains a mechlorethamine group and a benzimidazole heterocyclic ring with a butyric acid substituent, and has the following structural formula."
},
{
"NDCCode": "71288-103-20",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (71288-103-20) / 20 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "71288-0103-20",
"ProductNDC": "71288-103",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bendamustine",
"NonProprietaryName": "Bendamustine Hcl",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230605",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211001",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "BENDAMUSTINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/20mL",
"Pharm_Classes": "Alkylating Activity [MoA], Alkylating Drug [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230605",
"SamplePackage": "N",
"IndicationAndUsage": "Bendamustine Hydrochloride for Injection is an alkylating drug indicated for treatment of patients with: : 1 Chronic lymphocytic leukemia (CLL). Efficacy relative to first line therapies other than chlorambucil has not been established. (1.1) , 2 Indolent B-cell non-Hodgkin lymphoma (NHL) that has progressed during or within six months of treatment with rituximab or a rituximab-containing regimen. (1.2) .",
"Description": "Bendamustine hydrochloride is an alkylating agent. The chemical name of bendamustine hydrochloride monohydrate is 1H-benzimidazole-2-butanoic acid, 5-[bis(2-chloroethyl)amino]-1 methyl-, monohydrochloride monohydrate. Its empirical molecular formula is C16H21Cl2N3O2 · HCl · H2O, and the molecular weight is 412.7. Bendamustine hydrochloride monohydrate contains a mechlorethamine group and a benzimidazole heterocyclic ring with a butyric acid substituent, and has the following structural formula."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>71288-439-05</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (71288-439-05) / 4 mL in 1 VIAL, SINGLE-USE (71288-439-04) </PackageDescription>
<NDC11Code>71288-0439-05</NDC11Code>
<ProductNDC>71288-439</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Norepinephrine Bitartrate</ProprietaryName>
<NonProprietaryName>Norepinephrine Bitartrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20241201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040455</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>NOREPINEPHRINE BITARTRATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Catecholamine [EPC], Catecholamines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Norepinephrine Bitartrate Injection is indicated to raise blood pressure in adult patients with severe, acute hypotension.</IndicationAndUsage>
<Description>Norepinephrine (sometimes referred to as l-arterenol/Levarterenol or l-norepinephrine) is a sympathomimetic amine which differs from epinephrine by the absence of a methyl group on the nitrogen atom. Norepinephrine bitartrate, USP is (-)-α-(aminomethyl)-3,4-dihydroxybenzyl alcohol tartrate (1:1) (salt) monohydrate (molecular weight 337.3 g/mol) and has the following structural formula. Norepinephrine Bitartrate Injection, USP is supplied in a sterile aqueous solution in the form of the bitartrate salt to be administered by intravenous infusion. Norepinephrine is sparingly soluble in water, very slightly soluble in alcohol and ether, and readily soluble in acids. Each mL contains 1 mg of norepinephrine base (equivalent to 1.89 mg of norepinephrine bitartrate, anhydrous basis), sodium chloride for isotonicity, not more than 2 mg of sodium metabisulfite as an antioxidant. It has a pH of 3.0 to 4.5. The air in the vials has been displaced by nitrogen gas.</Description>
</NDC>
<NDC>
<NDCCode>13668-439-05</NDCCode>
<PackageDescription>500 CAPSULE in 1 BOTTLE (13668-439-05) </PackageDescription>
<NDC11Code>13668-0439-05</NDC11Code>
<ProductNDC>13668-439</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fenofibrate</ProprietaryName>
<NonProprietaryName>Fenofibrate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210782</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>FENOFIBRATE</SubstanceName>
<StrengthNumber>134</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Peroxisome Proliferator Receptor alpha Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Treatment of Hypercholesterolemia. Fenofibrate capsules are indicated as adjunctive therapy to diet for the reduction of LDL-C, total-C, Triglycerides and apo B in adult patients with primary hypercholesterolemia or mixed dyslipidemia (Fredrickson Types IIa and IIb. Lipid altering agents should be used in addition to a diet restricted in saturated fat and cholesterol when response to diet and non-pharmacological interventions alone has been inadequate (see National Cholesterol Education Program [NCEP] Treatment Guidelines, below). Treatment of Hypertriglyceridemia. Fenofibrate capsules are also indicated as adjunctive therapy to diet for treatment of adult patients with hypertriglyceridemia (Fredrickson Types IV and V hyperlipidemia). Improving glycemic control in diabetic patients showing fasting chylomicronemia will usually reduce fasting triglycerides and eliminate chylomicronemia thereby obviating the need for pharmacologic intervention. Markedly elevated levels of serum triglycerides (e.g. > 2,000 mg/dL) may increase the risk of developing pancreatitis. The effect of fenofibrate capsule therapy on reducing this risk has not been adequately studied. Drug therapy is not indicated for patients with Type I hyperlipoproteinemia, who have elevations of chylomicrons and plasma triglycerides, but who have normal levels of very low density lipoprotein (VLDL). Inspection of plasma refrigerated for 14 hours is helpful in distinguishing Types I to IV and V hyperlipoproteinemia. The initial treatment for dyslipidemia is dietary therapy specific for the type of lipoprotein abnormality. Excess body weight and excess alcoholic intake may be important factors in hypertriglyceridemia and should be addressed prior to any drug therapy. Physical exercise can be an important ancillary measure. Diseases contributory to hyperlipidemia, such as hypothyroidism or diabetes mellitus should be looked for and adequately treated. Estrogen therapy, like thiazide diuretics and beta-blockers, is sometimes associated with massive rises in plasma triglycerides, especially in subjects with familial hypertriglyceridemia. In such cases, discontinuation of the specific etiologic agent may obviate the need for specific drug therapy of hypertriglyceridemia. The use of drugs should be considered only when reasonable attempts have been made to obtain satisfactory results with non-drug methods. If the decision is made to use drugs, the patient should be instructed that this does not reduce the importance of adhering to diet (See WARNINGS and PRECAUTIONS).</IndicationAndUsage>
<Description>Fenofibrate Capsules, USP are a lipid regulating agent available as capsules for oral administration. Each capsule contains 67 mg, 134 mg or 200 mg of micronized fenofibrate. The chemical name for fenofibrate is Isopropyl 2-[4-(4-chlorobenzoyl)phenoxy]-2- methyl-propanoic acid, 1-methylethyl ester with the following structural formula. The empirical formula is C20H21O4Cl and the molecular weight is 360.83; fenofibrate is very soluble in methylene chloride, slightly soluble in alcohol and practically insoluble in water. The melting point is 79 to 82°C. Fenofibrate is a white or almost white, crystalline powder which is stable under ordinary conditions. For 200 mg strength: Meets USP Dissolution Test 6. Inactive Ingredients: Each capsule contains colloidal silicon dioxide, crospovidone type B, lactose monohydrate, magnesium stearate, pregelatinized starch (modified corn starch), sodium lauryl sulphate and sodium stearyl fumarate. Ingredients of capsule shells: Each capsule contains FD & C Red 40, FD & C Blue 1, Gelatin, Iron Oxide Red, Iron Oxide Yellow, Polyethylene Glycol, Sodium Lauryl Sulphate, Titanium Dioxide. Ingredients of printing ink: Black iron oxide-E172, Potassium hydroxide-E525, Propylene glycol-E1520 and Shellac-E904.</Description>
</NDC>
<NDC>
<NDCCode>21695-439-05</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (21695-439-05) > 5 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>21695-0439-05</NDC11Code>
<ProductNDC>21695-439</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ofloxacin</ProprietaryName>
<NonProprietaryName>Ofloxacin</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20040514</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076622</ApplicationNumber>
<LabelerName>Rebel Distributors Corp</LabelerName>
<SubstanceName>OFLOXACIN</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Quinolone Antimicrobial [EPC],Quinolones [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Ofloxacin ophthalmic solution is indicated for the treatment of infections caused by susceptible strains of the following bacteria in the conditions listed below. CONJUNCTIVITIS. Gram-positive bacteria:. Staphylococcus aureus Staphylococcus epidermidis Streptococcus pneumoniae. Gram-negative bacteria. Enterobacter cloacaeHaemophilus influenzaeProteus mirabilisPseudomonas aeruginosa. CORNEAL ULCERS. Gram-positive bacteria:. Staphylococcus aureus Staphylococcus epidermidis Streptococcus pneumoniae. Gram-negative bacteria. Pseudomonas aeruginosaSerratia marcescens*. Anaerobic species. Propionibacterium acnes. *Efficacy for this organism was studied in fewer than 10 infections.</IndicationAndUsage>
<Description>Ofloxacin Ophthalmic Solution 0.3% is a sterile ophthalmic solution. It is a fluorinated carboxyquinolone anti-infective for topical ophthalmic use. C18H20FN3O4. Mol. Wt. 361.37. Chemical Name. (±)-9-Fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4 benzoxazine-6-carboxylic acid. Each mL Contains: Active:ofloxacin 0.3% (3 mg/mL). Preservative Added:benzalkonium chloride (0.005%). Inactives: sodium chloride and purified water. Hydrochloric Acid and/or Sodium Hydroxide may be added to adjust pH. Ofloxacin ophthalmic solution is unbuffered and formulated with a pH of 6.4 (range - 6.0 to 6.8). It has an osmolality of 300 mOsm/kg. Ofloxacin is a fluorinated 4-quinolone which differs from other fluorinated 4-quinolones in that there is a six member (pyridobenzoxazine) ring from positions 1 to 8 of the basic ring structure.</Description>
</NDC>
<NDC>
<NDCCode>49643-439-05</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (49643-439-05) </PackageDescription>
<NDC11Code>49643-0439-05</NDC11Code>
<ProductNDC>49643-439</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Shad Scale Pollen</ProprietaryName>
<NonProprietaryName>Atriplex Confertifolia</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740312</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102211</ApplicationNumber>
<LabelerName>Allermed Laboratories, Inc.</LabelerName>
<SubstanceName>ATRIPLEX CONFERTIFOLIA POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19740312</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
<Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength.</Description>
</NDC>
<NDC>
<NDCCode>55111-439-05</NDCCode>
<PackageDescription>500 CAPSULE in 1 BOTTLE (55111-439-05) </PackageDescription>
<NDC11Code>55111-0439-05</NDC11Code>
<ProductNDC>55111-439</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ramipril</ProprietaryName>
<NonProprietaryName>Ramipril</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080618</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078191</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Limited</LabelerName>
<SubstanceName>RAMIPRIL</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080618</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>67877-439-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (67877-439-05) </PackageDescription>
<NDC11Code>67877-0439-05</NDC11Code>
<ProductNDC>67877-439</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rosuvastatin Calcium</ProprietaryName>
<NonProprietaryName>Rosuvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170321</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206465</ApplicationNumber>
<LabelerName>Ascend Laboratories, LLC</LabelerName>
<SubstanceName>ROSUVASTATIN CALCIUM</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170321</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rosuvastatin tablets is indicated: : 1 To reduce the risk of major adverse cardiovascular (CV) events (CV death, nonfatal myocardial infarction, nonfatal stroke, or an arterial revascularization procedure) in adults without established coronary heart disease who are at increased risk of CV disease based on age, high-sensitivity C-reactive protein (hsCRP) ≥2 mg/L, and at least one additional CV risk factor., 2 As an adjunct to diet to: .</IndicationAndUsage>
<Description>Rosuvastatin is a 3-hydroxy-3-methylglutaryl coenzyme A (HMG CoA)-reductase inhibitor. The chemical name for rosuvastatin calcium is bis[(E)-7-[4-(4-fluorophenyl)-6-isopropyl-2- [methyl(methylsulfonyl)amino] pyrimidin-5-yl](3R,5S)-3,5-dihydroxyhept-6-enoic acid] calcium salt with the following structural formula. The empirical formula for rosuvastatin calcium is (C22H27FN3O6S)2Ca and the molecular weight is 1001.14. Rosuvastatin calcium is a off -white to light yellow coloured powder that is soluble in N,N-Dimethyl formamide, acetone and acetonitrile and insoluble in water. Rosuvastatin calcium is a hydrophilic compound with a partition coefficient (octanol/water) of 0.13 at pH of 7.0. Rosuvastatin tablets for oral use contain rosuvastatin 5 mg, 10 mg, 20 mg, or 40 mg (equivalent to 5.2 mg, 10.4 mg, 20.8 mg, and 41.6 mg rosuvastatin calcium) and the following inactive ingredients: Each tablet contains: crospovidone, magnesium oxide, microcrystalline cellulose, lactose monohydrate, magnesium stearate, hypromellose, triacetin, iron oxide red, iron oxide yellow (5 mg), and titanium dioxide. Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>68382-439-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (68382-439-05) </PackageDescription>
<NDC11Code>68382-0439-05</NDC11Code>
<ProductNDC>68382-439</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aripiprazole</ProprietaryName>
<NonProprietaryName>Aripiprazole</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190604</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090472</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ARIPIPRAZOLE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190604</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Aripiprazole is an atypical antipsychotic. The oral formulation is indicated for: 1 Schizophrenia (14.1), 2 Irritability Associated with Autistic Disorder (14.4), 3 Treatment of Tourette's disorder (14.5).</IndicationAndUsage>
<Description>Aripiprazole is an atypical antipsychotic drug that is available as tablets. Aripiprazole is 7-[4-[4-(2,3-dichlorophenyl)-1- piperazinyl]butoxy]-3,4-dihydrocarbostyril. The molecular formula is C23H27Cl2N3O2 and its molecular weight is 448.39. The chemical structure is. Each aripiprazole tablet intended for oral administration contains 2 mg or 5 mg or 10 mg or 15 mg or 20 mg or 30 mg of aripiprazole, USP. In addition, each tablet contains the following inactive ingredients: aspartame, calcium stearate, crospovidone and mannitol. Each tablet except 2 mg strength also contains flavor firmenich powder peppermint. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>68428-439-05</NDCCode>
<PackageDescription>150 PELLET in 1 VIAL, GLASS (68428-439-05) </PackageDescription>
<NDC11Code>68428-0439-05</NDC11Code>
<ProductNDC>68428-439</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Inula Helenium</ProprietaryName>
<NonProprietaryName>Inula Helenium Root</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100203</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>INULA HELENIUM ROOT</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-12-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>84756-439-05</NDCCode>
<PackageDescription>100 g in 1 BOX (84756-439-05) </PackageDescription>
<NDC11Code>84756-0439-05</NDC11Code>
<ProductNDC>84756-439</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Water Gel Cream</ProprietaryName>
<NonProprietaryName>Water Gel Cream</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20241124</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M016</ApplicationNumber>
<LabelerName>Yiwu Xinqian E Commerce Co Ltd</LabelerName>
<SubstanceName>NIACINAMIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Apply twice daly(moring and night as a man and once as a woman.Afer apicaion, proeed with an acive masage for 3-5 minutes unthe product is fuy absorbed.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>84827-439-05</NDCCode>
<PackageDescription>100 g in 1 BOX (84827-439-05) </PackageDescription>
<NDC11Code>84827-0439-05</NDC11Code>
<ProductNDC>84827-439</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Trstay V-face</ProprietaryName>
<NonProprietaryName>Trstay V-face</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20241106</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M016</ApplicationNumber>
<LabelerName>Yiwu Xinqian E Commerce Co Ltd</LabelerName>
<SubstanceName>NIACINAMIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241106</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Apply twice daly(moring and night as a man and once as a woman.Afer apicaion, proeed with an acive masage for 3-5 minutes unthe product is fuy absorbed.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>71288-100-05</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (71288-100-05) > 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>71288-0100-05</NDC11Code>
<ProductNDC>71288-100</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carboplatin</ProprietaryName>
<NonProprietaryName>Carboplatin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170619</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077096</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>CARBOPLATIN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Platinum-based Drug [EPC], Platinum-containing Compounds [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-12-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170619</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71288-108-06</NDCCode>
<PackageDescription>5 VIAL, SINGLE-DOSE in 1 CARTON (71288-108-06) > 5 mL in 1 VIAL, SINGLE-DOSE (71288-108-05) </PackageDescription>
<NDC11Code>71288-0108-06</NDC11Code>
<ProductNDC>71288-108</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cytarabine</ProprietaryName>
<NonProprietaryName>Cytarabine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRATHECAL; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20200626</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206189</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>CYTARABINE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-01-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200626</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cytarabine Injection in combination with other approved anti-cancer drugs is indicated for remission induction in acute non-lymphocytic leukemia of adults and pediatric patients. It has also been found useful in the treatment of acute lymphocytic leukemia and the blast phase of chronic myelocytic leukemia. Intrathecal administration of Cytarabine Injection (preservative free preparations only) is indicated in the prophylaxis and treatment of meningeal leukemia.</IndicationAndUsage>
<Description>Cytarabine Injection 100 mg per 5 mL (20 mg per mL), an antineoplastic, is a sterile solution of cytarabine for intravenous, intrathecal or subcutaneous administration. Each mL contains 20 mg Cytarabine, USP (20 mg per mL) in a single dose vial (100 mg per 5 mL). Cytarabine Injection 100 mg per 5 mL is a sterile solution for intravenous, intrathecal or subcutaneous administration. Each mL contains 20 mg Cytarabine, USP, and the following inactive ingredients: sodium chloride 6.8 mg and Water for Injection q.s. When necessary the pH is adjusted with hydrochloric acid and/or sodium hydroxide to a pH of 7.4. Each vial contains approximately 0.58 mEq sodium. Cytarabine is chemically 1-β-D-Arabinofuranosylcytosine. The structural formula is:. Cytarabine is an odorless, white to off-white crystalline powder which is freely soluble in water and slightly soluble in alcohol and in chloroform.</Description>
</NDC>
<NDC>
<NDCCode>71288-156-05</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (71288-156-05) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>71288-0156-05</NDC11Code>
<ProductNDC>71288-156</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Thiotepa</ProprietaryName>
<NonProprietaryName>Thiotepa</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRACAVITARY; INTRAVENOUS; INTRAVESICAL</RouteName>
<StartMarketingDate>20231226</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216037</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc</LabelerName>
<SubstanceName>THIOTEPA</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA], Alkylating Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-12-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231226</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Thiotepa for Injection is an alkylating drug indicated: 1 For treatment of adenocarcinoma of the breast or ovary. (1.2), 2 For controlling intracavitary effusions secondary to diffuse or localized neoplastic diseases of various serosal cavities. (1.3), 3 For treatment of superficial papillary carcinoma of the urinary bladder. (1.4).</IndicationAndUsage>
<Description>Thiotepa for Injection, USP is an alkylating agent. Thiotepa for Injection, USP is supplied as a nonpyrogenic, sterile, white lyophilized powder or lyophilized cake for intravenous, intracavitary, or intravesical use after reconstitution and dilution. Thiotepa for Injection, USP is available in a single-dose vial containing: 1 15 mg thiotepa. After reconstitution with 1.5 mL of water for injection, each mL contains 10 mg thiotepa., 2 100 mg thiotepa. After reconstitution with 10 mL of water for injection, each mL contains 10 mg thiotepa.</Description>
</NDC>
<NDC>
<NDCCode>71288-175-05</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (71288-175-05) / 5 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>71288-0175-05</NDC11Code>
<ProductNDC>71288-175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Etoposide</ProprietaryName>
<NonProprietaryName>Etoposide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074529</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ETOPOSIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Topoisomerase Inhibitor [EPC], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Etoposide Injection is indicated in the management of the following neoplasms.</IndicationAndUsage>
<Description>Etoposide Injection, USP (also commonly known as VP-16) is a semisynthetic derivative of podophyllotoxin used in the treatment of certain neoplastic diseases. It is 4'-demethylepipodophyllotoxin 9-[4,6-0-(R)-ethylidene-β-D-glucopyranoside]. It is very soluble in methanol and chloroform, slightly soluble in ethanol, and sparingly soluble in water and ether. It is made more miscible with water by means of organic solvents. Etoposide Injection, USP is available for intravenous use as a sterile 20 mg per mL solution in 100 mg (5 mL), 500 mg (25 mL), or 1 g (50 mL) sterile, multiple dose vials. The pH of the clear, colorless to yellow solution is 3.0 to 4.0. Each mL contains: 20 mg etoposide, USP, 2 mg citric acid anhydrous, 80 mg polysorbate 80, 650 mg polyethylene glycol 300 (57.5% v/v and 65.0% w/v), and 262 mg dehydrated alcohol (33.2% v/v and 26.2% w/v). The structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>71288-182-05</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (71288-182-05) / 4 mL in 1 VIAL, SINGLE-DOSE (71288-182-04) </PackageDescription>
<NDC11Code>71288-0182-05</NDC11Code>
<ProductNDC>71288-182</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Daunorubicin Hydrochloride</ProprietaryName>
<NonProprietaryName>Daunorubicin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065035</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>DAUNORUBICIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Daunorubicin hydrochloride injection in combination with other approved anticancer drugs is indicated for remission induction in acute nonlymphocytic leukemia (myelogenous, monocytic, erythroid) of adults and for remission induction in acute lymphocytic leukemia of children and adults.</IndicationAndUsage>
<Description>Daunorubicin Hydrochloride Injection consists of the hydrochloride salt of an anthracycline cytotoxic antibiotic produced by a strain of Streptomyces coeruleorubidus. It is provided as a deep red sterile liquid in vials for intravenous administration only. Each mL contains daunorubicin hydrochloride, USP equivalent to 5 mg of daunorubicin, 9 mg sodium chloride, hydrochloric acid (to adjust pH), and water for injection, q.s. It has the following structural formula which may be described with the chemical name of (1S,3S)-3-Acetyl-1,2,3,4,6,11-hexahydro-3,5,12-trihydroxy-10-methoxy-6,11-dioxo-1-naphthacenyl 3-amino-2,3,6-trideoxy-α-L-lyxo-hexopyranoside hydrochloride. C27H29NO10HCl M.W. 563.99. It is a hygroscopic crystalline powder. The pH of a 5 mg/mL aqueous solution is 3 to 4.</Description>
</NDC>
<NDC>
<NDCCode>71288-184-05</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (71288-184-05) / 5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>71288-0184-05</NDC11Code>
<ProductNDC>71288-184</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Idarubicin Hydrochloride</ProprietaryName>
<NonProprietaryName>Idarubicin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065036</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>IDARUBICIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Idarubicin Hydrochloride Injection in combination with other approved antileukemic drugs is indicated for the treatment of acute myeloid leukemia (AML) in adults. This includes French-American-British (FAB) classifications M1 through M7.</IndicationAndUsage>
<Description>Idarubicin Hydrochloride Injection, USP contains idarubicin hydrochloride, USP and is a sterile, semi-synthetic, preservative-free solution (PFS) antineoplastic anthracycline for intravenous use. Chemically, idarubicin hydrochloride, USP is 5, 12-Naphthacenedione, 9-acetyl-7-[(3-amino-2,3,6-trideoxy-α-L-lyxo-hexopyranosyl)oxy]-7,8,9,10-tetrahydro-6,9,11-trihydroxyhydrochloride, (7S-cis). The structural formula is as follows. C26H27NO9HCl M.W. 533.95. Idarubicin Hydrochloride Injection, USP is a sterile, clear, orange-red, isotonic parenteral preservative-free solution, available in 5 mL (5 mg), 10 mL (10 mg) and 20 mL (20 mg) single-dose-only vials. Each mL contains idarubicin hydrochloride USP, 1 mg (equivalent to 0.93 mg idarubicin free base) and the following inactive ingredients: glycerin USP, 25 mg and q.s. water for injection, USP. Hydrochloric acid and/or sodium hydroxide is used to adjust pH to a target of 3.5.</Description>
</NDC>
<NDC>
<NDCCode>71288-203-05</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (71288-203-05) / 4 mL in 1 VIAL, SINGLE-DOSE (71288-203-04) </PackageDescription>
<NDC11Code>71288-0203-05</NDC11Code>
<ProductNDC>71288-203</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Furosemide</ProprietaryName>
<NonProprietaryName>Furosemide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20220127</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212803</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>FUROSEMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220127</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Parenteral therapy should be reserved for patients unable to take oral medication or for patients in emergency clinical situations.</IndicationAndUsage>
<Description>Furosemide is a diuretic which is an anthranilic acid derivative. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide Injection, USP 10 mg per mL is a sterile, nonpyrogenic solution in vials for intravenous and intramuscular injection. Furosemide is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, sparingly soluble in alcohol, freely soluble in dilute alkali solutions and insoluble in dilute acids. The structural formula is as follows. Each mL contains: Furosemide 10 mg, Water for Injection q.s., Sodium Chloride for isotonicity, Sodium Hydroxide and, if necessary, Hydrochloric Acid to adjust pH between 8.0 and 9.3.</Description>
</NDC>
<NDC>
<NDCCode>71288-404-05</NDCCode>
<PackageDescription>25 VIAL, MULTI-DOSE in 1 CARTON (71288-404-05) / 4 mL in 1 VIAL, MULTI-DOSE (71288-404-04) </PackageDescription>
<NDC11Code>71288-0404-05</NDC11Code>
<ProductNDC>71288-404</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Heparin Sodium</ProprietaryName>
<NonProprietaryName>Heparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190615</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211007</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>HEPARIN SODIUM</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[USP'U]/mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Heparin Sodium Injection is indicated for: 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism;, 2 Prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease;, 3 Atrial fibrillation with embolization;, 4 Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);, 5 Prevention of clotting in arterial and cardiac surgery;, 6 Prophylaxis and treatment of peripheral arterial embolism., 7 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures.</IndicationAndUsage>
<Description>Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, possessing anticoagulant properties. It is composed of polymers of alternating derivations of α-D-glucosamido (N-sulfated O-sulfated or N-acetylated) and O-sulfated uronic acid (α-L-iduronic acid or β-D-glucoronic acid). Structure of heparin sodium (representative subunits). Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Heparin Sodium Injection, USP preserved with Benzyl Alcohol is available in the following concentrations per mL. pH 5.0-7.5; sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>71288-408-06</NDCCode>
<PackageDescription>25 VIAL, MULTI-DOSE in 1 CARTON (71288-408-06) > 5 mL in 1 VIAL, MULTI-DOSE (71288-408-05) </PackageDescription>
<NDC11Code>71288-0408-06</NDC11Code>
<ProductNDC>71288-408</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glycopyrrolate</ProprietaryName>
<NonProprietaryName>Glycopyrrolate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190515</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211705</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>GLYCOPYRROLATE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-10-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190515</StartMarketingDatePackage>
<EndMarketingDatePackage>20231030</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glycopyrrolate Injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, Glycopyrrolate Injection may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants.</IndicationAndUsage>
<Description>Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains. Glycopyrrolate, USP 0.2 mg. Water for Injection, USP q.s. Benzyl Alcohol, NF 0.9% (preservative). pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.33. Its structural formula is as follows. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection, USP is a clear, colorless, sterile liquid; pH 2.0 – 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P = -1.52) at ambient room temperature (24°C).</Description>
</NDC>
<NDC>
<NDCCode>71288-409-05</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (71288-409-05) / 5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>71288-0409-05</NDC11Code>
<ProductNDC>71288-409</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Palonosetron Hydrochloride</ProprietaryName>
<NonProprietaryName>Palonosetron Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230814</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215861</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>PALONOSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-08-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230814</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Palonosetron Hydrochloride Injection is a serotonin-3 (5-HT3) receptor antagonist indicated in. Adults for prevention of: 1 acute and delayed nausea and vomiting associated with initial and repeat courses of moderately emetogenic cancer chemotherapy (MEC). (1), 2 acute nausea and vomiting associated with initial and repeat courses of highly emetogenic cancer chemotherapy (HEC). (1), 3 postoperative nausea and vomiting (PONV) for up to 24 hours following surgery. Efficacy beyond 24 hours has not been demonstrated (1).</IndicationAndUsage>
<Description>Palonosetron Hydrochloride Injection contains palonosetron as palonosetron hydrochloride, an antiemetic and antinauseant agent. It is a serotonin-3 (5-HT3) receptor antagonist with a strong binding affinity for this receptor. Chemically, palonosetron hydrochloride is: (3aS)-2-[(S)-1-Azabicyclo [2.2.2]oct-3-yl]-2,3,3a,4,5,6-hexahydro-1-oxo-1Hbenz[de]isoquinoline hydrochloride. The empirical formula is C19H24N2O.HCl, with a molecular weight of 332.87. Palonosetron hydrochloride exists as a single isomer and has the following structural formula. Palonosetron hydrochloride is a white to off-white crystalline powder. It is freely soluble in water, soluble in propylene glycol, and slightly soluble in ethanol and 2-propanol. Palonosetron Hydrochloride Injection is a sterile, clear, colorless, nonpyrogenic, isotonic, buffered solution for intravenous administration. Palonosetron Hydrochloride Injection is available as a 5 mL single-dose vial. Each 5 mL vial contains: 0.25 mg palonosetron (equivalent to 0.28 mg palonosetron hydrochloride), 207.5 mg mannitol, USP, edetate disodium dihydrate, USP, and citrate and citric acid buffers in water for intravenous administration. Hydrochloric acid, NF or sodium hydroxide, NF may have been added to adjust the pH of the solution to 4.5 to 5.5.</Description>
</NDC>
<NDC>
<NDCCode>71288-415-06</NDCCode>
<PackageDescription>25 VIAL, MULTI-DOSE in 1 CARTON (71288-415-06) / 5 mL in 1 VIAL, MULTI-DOSE (71288-415-05) </PackageDescription>
<NDC11Code>71288-0415-06</NDC11Code>
<ProductNDC>71288-415</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glycopyrrolate</ProprietaryName>
<NonProprietaryName>Glycopyrrolate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20210706</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212802</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>GLYCOPYRROLATE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210706</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glycopyrrolate Injection is an anticholinergic indicated. in anesthesia (adult and pediatric patients): 1 for reduction of salivary, tracheobronchial, and pharyngeal secretions, reduction of volume and acidity of gastric secretions, and blockade of cardiac inhibitory reflexes during induction of anesthesia and intubation., 2 intraoperatively to counteract surgically or drug-induced or vagal reflex-associated arrhythmias., 3 for protection against peripheral muscarinic effects of cholinergic agents. (1).</IndicationAndUsage>
<Description>Glycopyrrolate is a synthetic anticholinergic agent. It is a quaternary ammonium salt with the following chemical name. 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.34. Its structural formula is as follows. C19H28BrNO3 398.34. Glycopyrrolate occurs as a white, odorless, crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. It is completely ionized at physiological pH values. Glycopyrrolate Injection, USP is a clear, colorless, sterile liquid with a pH of 2.0 to 3.0. The partition coefficient of glycopyrrolate in n-octanol/water system is 0.304 (log10 P = -1.52) at ambient room temperature (24°C). Glycopyrrolate Injection, USP is intended for intramuscular or intravenous administration. Each 1 mL contains 0.2 mg of glycopyrrolate, water for injection, and hydrochloric acid or sodium hydroxide as pH adjusters.</Description>
</NDC>
<NDC>
<NDCCode>71288-504-05</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (71288-504-05) / 5 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>71288-0504-05</NDC11Code>
<ProductNDC>71288-504</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Haloperidol Decanoate</ProprietaryName>
<NonProprietaryName>Haloperidol Decanoate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20210726</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214507</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>HALOPERIDOL DECANOATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Typical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210726</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Haloperidol Decanoate Injection is indicated for the treatment of schizophrenia in adults who were previously taking a stable dosage of an immediate-release oral haloperidol product.</IndicationAndUsage>
<Description>Haloperidol Decanoate Injection is the decanoate ester of haloperidol, for intramuscular use. Haloperidol is a typical antipsychotic. The structural formula of haloperidol decanoate is 4-(4-chlorophenyl)-1-[4-(4-fluorophenyl)-4-oxobutyl] piperidin-4-yl decanoate. The molecular formula is C31H41CIFNO3 and has a molecular weight of 530.12. Haloperidol decanoate is almost insoluble in water (0.01 mg/mL) but is soluble in most organic solvents. Each mL of Haloperidol Decanoate Injection contains: 1 50 mg of haloperidol (present as 70.52 mg of haloperidol decanoate) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative., 2 100 mg of haloperidol (present as 141.04 mg of haloperidol decanoate) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative.</Description>
</NDC>
<NDC>
<NDCCode>71288-700-06</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (71288-700-06) / 5 mL in 1 VIAL, MULTI-DOSE (71288-700-05) </PackageDescription>
<NDC11Code>71288-0700-06</NDC11Code>
<ProductNDC>71288-700</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rocuronium Bromide</ProprietaryName>
<NonProprietaryName>Rocuronium Bromide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230508</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213453</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ROCURONIUM BROMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-05-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230508</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rocuronium Bromide Injection is indicated for inpatients and outpatients as an adjunct to general anesthesia to facilitate both rapid sequence and routine tracheal intubation, and to provide skeletal muscle relaxation during surgery or mechanical ventilation.</IndicationAndUsage>
<Description>Rocuronium Bromide Injection is a nondepolarizing neuromuscular blocking agent with a rapid to intermediate onset depending on dose and intermediate duration. Rocuronium bromide is chemically designated as 1-[17β-(acetyloxy)-3α-hydroxy-2β-(4-morpholinyl)-5α-androstan-16β-yl]-1-(2-propenyl)pyrrolidinium bromide. The structural formula is. The chemical formula is C32H53BrN2O4 with a molecular weight of 609.70. The partition coefficient of rocuronium bromide in n-octanol/water is 0.5 at 20°C. Rocuronium Bromide Injection is supplied as a sterile, nonpyrogenic, isotonic solution that is clear, colorless to yellow, for intravenous injection only. Each mL contains 10 mg rocuronium bromide and 2 mg sodium acetate trihydrate. The aqueous solution is adjusted to isotonicity with sodium chloride (3.3 mg per mL) and to a pH of 4 with glacial acetic acid and/or sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>71288-701-05</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (71288-701-05) / 5 mL in 1 VIAL, SINGLE-DOSE (71288-701-06) </PackageDescription>
<NDC11Code>71288-0701-05</NDC11Code>
<ProductNDC>71288-701</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atracurium Besylate</ProprietaryName>
<NonProprietaryName>Atracurium Besylate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180515</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091488</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ATRACURIUM BESYLATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180515</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atracurium besylate injection is indicated, as an adjunct to general anesthesia, to facilitate endotracheal intubation and to provide skeletal muscle relaxation during surgery or mechanical ventilation.</IndicationAndUsage>
<Description>Atracurium besylate is an intermediate-duration, nondepolarizing, skeletal muscle relaxant for intravenous administration. Atracurium besylate is designated as 2-(2-Carboxyethyl)-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methyl-1-veratrylisoquinolinium benzenesulfonate, pentamethylene ester. It has a molecular weight of 1243.49, and its molecular formula is C65H82N2O18S2. The structural formula is. Atracurium besylate is a complex molecule containing four sites at which different stereochemical configurations can occur. The symmetry of the molecule, however, results in only ten, instead of sixteen, possible different isomers. The manufacture of atracurium besylate results in these isomers being produced in unequal amounts but with a consistent ratio. Those molecules in which the methyl group attached to the quaternary nitrogen projects on the opposite side to the adjacent substituted-benzyl moiety predominate by approximately 3:1. Atracurium Besylate Injection, USP is a sterile, non-pyrogenic aqueous solution. Each mL contains 10 mg atracurium besylate. The pH is adjusted to 3.25 to 3.65 with benzenesulfonic acid. The multiple dose vial contains 0.9% benzyl alcohol added as a preservative. Atracurium besylate injection slowly loses potency with time at the rate of approximately 6% per year under refrigeration (5°C). Atracurium besylate injection should be refrigerated at 2° to 8°C (36° to 46°F) to preserve potency. Rate of loss in potency increases to approximately 5% per month at 25°C (77°F). Upon removal from refrigeration to room temperature storage conditions (25°C / 77°F), use atracurium besylate injection within 14 days even if re-refrigerated.</Description>
</NDC>
<NDC>
<NDCCode>71288-712-06</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (71288-712-06) / 5 mL in 1 VIAL, SINGLE-DOSE (71288-712-05) </PackageDescription>
<NDC11Code>71288-0712-06</NDC11Code>
<ProductNDC>71288-712</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cisatracurium Besylate</ProprietaryName>
<NonProprietaryName>Cisatracurium Besylate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20191031</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211668</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>CISATRACURIUM BESYLATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-02-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cisatracurium Besylate Injection is indicated: : 1 as an adjunct to general anesthesia to facilitate tracheal intubation in adults and in pediatric patients 1 month to 12 years of age , 2 to provide skeletal muscle relaxation in adults during surgical procedures or during mechanical ventilation in the ICU , 3 to provide skeletal muscle relaxation during surgical procedures via infusion in pediatric patients 2 years and older .</IndicationAndUsage>
<Description>Cisatracurium besylate is a nondepolarizing skeletal neuromuscular blocker for intravenous administration. Compared to other neuromuscular blockers, it is intermediate in its onset and duration of action. Cisatracurium Besylate Injection, USP contains cisatracurium besylate as the active pharmaceutical ingredient. Cisatracurium besylate is one of 10 isomers of atracurium besylate and constitutes approximately 15% of that mixture. Cisatracurium besylate is [1R-[1α,2α(1'R*,2'R*)]]-2,2'-[1,5-pentanediylbis[oxy(3-oxo-3,1-propanediyl)]]bis[1-[(3,4-dimethoxyphenyl)methyl]-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methylisoquinolinium] dibenzenesulfonate. The molecular formula of the cisatracurium parent bis-cation is C53H72N2O12 and the molecular weight is 929.2. The molecular formula of cisatracurium as the besylate salt is C65H82N2O18S2 and the molecular weight is 1243.48. The structural formula of cisatracurium besylate is. The log of the partition coefficient of cisatracurium besylate is -2.12 in a 1-octanol/distilled water system at 25°C. Cisatracurium Besylate Injection, USP is a sterile, nonpyrogenic aqueous solution. Each mL in the single-dose vials contains either 2 mg or 10 mg of cisatracurium (equivalent to 2.68 mg and 13.38 mg of cisatracurium besylate; respectively), and benzenesulfonic acid as pH adjuster in water for injection. Each mL in the multi-dose vials contains 2 mg of cisatracurium (equivalent to 2.68 mg of cisatracurium besylate), benzenesulfonic acid as pH adjuster, and also contains 9 mg of benzyl alcohol as preservative, in water for injection. The pH of Cisatracurium Besylate Injection, USP is between 3.0 and 3.8.</Description>
</NDC>
<NDC>
<NDCCode>71288-805-06</NDCCode>
<PackageDescription>6 VIAL, SINGLE-DOSE in 1 CARTON (71288-805-06) > 5 mL in 1 VIAL, SINGLE-DOSE (71288-805-05) </PackageDescription>
<NDC11Code>71288-0805-06</NDC11Code>
<ProductNDC>71288-805</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isosulfan Blue</ProprietaryName>
<NonProprietaryName>Isosulfan Blue</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20211103</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213130</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ISOSULFAN BLUE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2021-11-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211103</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Isosulfan Blue Injection 1% upon subcutaneous administration, delineates the lymphatic vessels draining the region of injection. It is an adjunct to lymphography in: primary and secondary lymphedema of the extremities; chyluria, chylous ascites or chylothorax; lymph node involvement by primary or secondary neoplasm; lymph node response to therapeutic modalities (1.1).</IndicationAndUsage>
<Description>The chemical name of Isosulfan Blue Injection 1% is N-[4-[[4-(diethylamino)phenyl] (2,5- disulfophenyl) methylene]-2,5-cyclohexadien-1-ylidene]-N-ethylethanaminium hydroxide, inner salt, sodium salt. Its structural formula is. Isosulfan Blue Injection 1% is a sterile aqueous solution for subcutaneous administration. Phosphate buffer in sterile, nonpyrogenic water is added in sufficient quantity to yield a final pH of 6.8 to 7.4. Each mL of solution contains 10 mg isosulfan blue, 6.6 mg dibasic sodium phosphate, anhydrous and 2.7 mg monobasic potassium phosphate. The solution contains no preservative. Isosulfan Blue Injection 1% is a contrast agent for the delineation of lymphatic vessels.</Description>
</NDC>
<NDC>
<NDCCode>71288-033-75</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (71288-033-75) / 1 INJECTION, POWDER, FOR SOLUTION in 1 BOTTLE</PackageDescription>
<NDC11Code>71288-0033-75</NDC11Code>
<ProductNDC>71288-033</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin And Sulbactam</ProprietaryName>
<NonProprietaryName>Ampicillin Sodium And Sulbactam Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20061127</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065403</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>AMPICILLIN SODIUM; SULBACTAM SODIUM</SubstanceName>
<StrengthNumber>10; 5</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20061127</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin and Sulbactam for Injection is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below.</IndicationAndUsage>
<Description>Ampicillin and Sulbactam for Injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium issodium penicillinate sulfone; sodium (2S,5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection, USP is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions. The pH of the solutions is between 8 and 10. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 15 g sterile Pharmacy Bulk Package contains ampicillin 10 g and sulbactam 5 g (equivalent to 10.629 g ampicillin sodium and 5.470 g sulbactam sodium). Each sterile Pharmacy Bulk Package contains approximately 1150 mg of sodium. Ampicillin and Sulbactam for Injection, USP Pharmacy Bulk Package is a bottle containing a sterile preparation for parenteral use. The Pharmacy Bulk Package is for use in a pharmacy admixture setting; it provides many single doses of Ampicillin and Sulbactam for Injection, USP for additionto suitable parenteral fluids in the preparation of admixtures for intravenous infusion. (See DIRECTIONS FOR USE - Directions for Proper Use of Pharmacy Bulk Package section). FURTHER DILUTION IS REQUIRED BEFORE USE.</Description>
</NDC>
<NDC>
<NDCCode>71288-034-50</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (71288-034-50) / 25 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>71288-0034-50</NDC11Code>
<ProductNDC>71288-034</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dalbavancin</ProprietaryName>
<NonProprietaryName>Dalbavancin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20251126</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218929</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc</LabelerName>
<SubstanceName>DALBAVANCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/25mL</StrengthUnit>
<Pharm_Classes>Lipoglycopeptide Antibacterial [EPC], Lipoglycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251126</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dalbavancin for Injection is a lipoglycopeptide antibacterial indicated for the treatment of adult and pediatric patients with acute bacterial skin and skin structure infections (ABSSSI) caused by designated susceptible strains of Gram-positive microorganisms. (1.1). To reduce the development of drug-resistant bacteria and maintain the effectiveness of Dalbavancin for Injection and other antibacterial drugs, Dalbavancin for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. (1.2).</IndicationAndUsage>
<Description>Dalbavancin for Injection is a lipoglycopeptide antibacterial synthesized from a fermentation product of Nonomuraea species. Dalbavancin is a mixture of five closely related active homologs (A0, A1, B0, B1, and B2); the component B0 is the major component of dalbavancin. The homologs share the same core structure and differ in the fatty acid side chain of the N-acylaminoglucuronic acid moiety (R1) structure and/or the presence of an additional methyl group (R2) on the terminal amino group (shown in the Figure 1 and Table 3 below). Figure 1. Dalbavancin Structural Formula. *Anhydrous free base. The B0 INN chemical name is: 5,31-dichloro-38-de(methoxycarbonyl)-7-demethyl-19-deoxy-56-O-[2-deoxy-2-[(10-methylundecanoyl)amino]-β-D-glucopyranuronosyl]-38-[[3-(dimethylamino)propyl] carbamoyl]-42-O-α-D-mannopyranosyl-15-N-methyl(ristomycin A aglycone) hydrochloride. Dalbavancin for Injection is supplied in clear glass vials as a sterile, lyophilized, preservative-free, white to off-white to pale yellow solid. Each vial contains dalbavancin HCl equivalent to 500 mg of dalbavancin as the free base, plus lactose monohydrate (129 mg) and mannitol (129 mg) as excipients. Sodium hydroxide or hydrochloric acid may be added to adjust the pH at the time of manufacture. The powder is to be reconstituted and further diluted for IV infusion [see Dosage and Administration (2.4), How Supplied/Storage and Handling (16)].</Description>
</NDC>
<NDC>
<NDCCode>71288-102-10</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (71288-102-10) / 5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>71288-0102-10</NDC11Code>
<ProductNDC>71288-102</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bendamustine</ProprietaryName>
<NonProprietaryName>Bendamustine Hcl</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230605</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211001</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>BENDAMUSTINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA], Alkylating Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230605</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bendamustine Hydrochloride for Injection is an alkylating drug indicated for treatment of patients with: : 1 Chronic lymphocytic leukemia (CLL). Efficacy relative to first line therapies other than chlorambucil has not been established. (1.1) , 2 Indolent B-cell non-Hodgkin lymphoma (NHL) that has progressed during or within six months of treatment with rituximab or a rituximab-containing regimen. (1.2) .</IndicationAndUsage>
<Description>Bendamustine hydrochloride is an alkylating agent. The chemical name of bendamustine hydrochloride monohydrate is 1H-benzimidazole-2-butanoic acid, 5-[bis(2-chloroethyl)amino]-1 methyl-, monohydrochloride monohydrate. Its empirical molecular formula is C16H21Cl2N3O2 · HCl · H2O, and the molecular weight is 412.7. Bendamustine hydrochloride monohydrate contains a mechlorethamine group and a benzimidazole heterocyclic ring with a butyric acid substituent, and has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>71288-103-20</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (71288-103-20) / 20 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>71288-0103-20</NDC11Code>
<ProductNDC>71288-103</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bendamustine</ProprietaryName>
<NonProprietaryName>Bendamustine Hcl</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230605</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211001</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>BENDAMUSTINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/20mL</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA], Alkylating Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230605</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bendamustine Hydrochloride for Injection is an alkylating drug indicated for treatment of patients with: : 1 Chronic lymphocytic leukemia (CLL). Efficacy relative to first line therapies other than chlorambucil has not been established. (1.1) , 2 Indolent B-cell non-Hodgkin lymphoma (NHL) that has progressed during or within six months of treatment with rituximab or a rituximab-containing regimen. (1.2) .</IndicationAndUsage>
<Description>Bendamustine hydrochloride is an alkylating agent. The chemical name of bendamustine hydrochloride monohydrate is 1H-benzimidazole-2-butanoic acid, 5-[bis(2-chloroethyl)amino]-1 methyl-, monohydrochloride monohydrate. Its empirical molecular formula is C16H21Cl2N3O2 · HCl · H2O, and the molecular weight is 412.7. Bendamustine hydrochloride monohydrate contains a mechlorethamine group and a benzimidazole heterocyclic ring with a butyric acid substituent, and has the following structural formula.</Description>
</NDC>
</NDCList>