{
"NDC": [
{
"NDCCode": "71288-701-05",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (71288-701-05) / 5 mL in 1 VIAL, SINGLE-DOSE (71288-701-06) ",
"NDC11Code": "71288-0701-05",
"ProductNDC": "71288-701",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atracurium Besylate",
"NonProprietaryName": "Atracurium Besylate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180515",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091488",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "ATRACURIUM BESYLATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2024-12-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180515",
"SamplePackage": "N",
"IndicationAndUsage": "Atracurium besylate injection is indicated, as an adjunct to general anesthesia, to facilitate endotracheal intubation and to provide skeletal muscle relaxation during surgery or mechanical ventilation.",
"Description": "Atracurium besylate is an intermediate-duration, nondepolarizing, skeletal muscle relaxant for intravenous administration. Atracurium besylate is designated as 2-(2-Carboxyethyl)-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methyl-1-veratrylisoquinolinium benzenesulfonate, pentamethylene ester. It has a molecular weight of 1243.49, and its molecular formula is C65H82N2O18S2. The structural formula is. Atracurium besylate is a complex molecule containing four sites at which different stereochemical configurations can occur. The symmetry of the molecule, however, results in only ten, instead of sixteen, possible different isomers. The manufacture of atracurium besylate results in these isomers being produced in unequal amounts but with a consistent ratio. Those molecules in which the methyl group attached to the quaternary nitrogen projects on the opposite side to the adjacent substituted-benzyl moiety predominate by approximately 3:1. Atracurium Besylate Injection, USP is a sterile, non-pyrogenic aqueous solution. Each mL contains 10 mg atracurium besylate. The pH is adjusted to 3.25 to 3.65 with benzenesulfonic acid. The multiple dose vial contains 0.9% benzyl alcohol added as a preservative. Atracurium besylate injection slowly loses potency with time at the rate of approximately 6% per year under refrigeration (5°C). Atracurium besylate injection should be refrigerated at 2° to 8°C (36° to 46°F) to preserve potency. Rate of loss in potency increases to approximately 5% per month at 25°C (77°F). Upon removal from refrigeration to room temperature storage conditions (25°C / 77°F), use atracurium besylate injection within 14 days even if re-refrigerated."
},
{
"NDCCode": "71288-100-05",
"PackageDescription": "1 VIAL in 1 CARTON (71288-100-05) > 5 mL in 1 VIAL",
"NDC11Code": "71288-0100-05",
"ProductNDC": "71288-100",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carboplatin",
"NonProprietaryName": "Carboplatin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170619",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077096",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "CARBOPLATIN",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Platinum-based Drug [EPC], Platinum-containing Compounds [EXT]",
"Status": "Deprecated",
"LastUpdate": "2022-12-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20170619",
"SamplePackage": "N"
},
{
"NDCCode": "71288-108-06",
"PackageDescription": "5 VIAL, SINGLE-DOSE in 1 CARTON (71288-108-06) > 5 mL in 1 VIAL, SINGLE-DOSE (71288-108-05) ",
"NDC11Code": "71288-0108-06",
"ProductNDC": "71288-108",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cytarabine",
"NonProprietaryName": "Cytarabine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRATHECAL; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20200626",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206189",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "CYTARABINE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2022-01-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200626",
"SamplePackage": "N",
"IndicationAndUsage": "Cytarabine Injection in combination with other approved anti-cancer drugs is indicated for remission induction in acute non-lymphocytic leukemia of adults and pediatric patients. It has also been found useful in the treatment of acute lymphocytic leukemia and the blast phase of chronic myelocytic leukemia. Intrathecal administration of Cytarabine Injection (preservative free preparations only) is indicated in the prophylaxis and treatment of meningeal leukemia.",
"Description": "Cytarabine Injection 100 mg per 5 mL (20 mg per mL), an antineoplastic, is a sterile solution of cytarabine for intravenous, intrathecal or subcutaneous administration. Each mL contains 20 mg Cytarabine, USP (20 mg per mL) in a single dose vial (100 mg per 5 mL). Cytarabine Injection 100 mg per 5 mL is a sterile solution for intravenous, intrathecal or subcutaneous administration. Each mL contains 20 mg Cytarabine, USP, and the following inactive ingredients: sodium chloride 6.8 mg and Water for Injection q.s. When necessary the pH is adjusted with hydrochloric acid and/or sodium hydroxide to a pH of 7.4. Each vial contains approximately 0.58 mEq sodium. Cytarabine is chemically 1-β-D-Arabinofuranosylcytosine. The structural formula is:. Cytarabine is an odorless, white to off-white crystalline powder which is freely soluble in water and slightly soluble in alcohol and in chloroform."
},
{
"NDCCode": "71288-156-05",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (71288-156-05) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "71288-0156-05",
"ProductNDC": "71288-156",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Thiotepa",
"NonProprietaryName": "Thiotepa",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRACAVITARY; INTRAVENOUS; INTRAVESICAL",
"StartMarketingDate": "20231226",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216037",
"LabelerName": "Meitheal Pharmaceuticals Inc",
"SubstanceName": "THIOTEPA",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Alkylating Activity [MoA], Alkylating Drug [EPC]",
"Status": "Active",
"LastUpdate": "2023-12-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231226",
"SamplePackage": "N",
"IndicationAndUsage": "Thiotepa for Injection is an alkylating drug indicated: 1 For treatment of adenocarcinoma of the breast or ovary. (1.2), 2 For controlling intracavitary effusions secondary to diffuse or localized neoplastic diseases of various serosal cavities. (1.3), 3 For treatment of superficial papillary carcinoma of the urinary bladder. (1.4).",
"Description": "Thiotepa for Injection, USP is an alkylating agent. Thiotepa for Injection, USP is supplied as a nonpyrogenic, sterile, white lyophilized powder or lyophilized cake for intravenous, intracavitary, or intravesical use after reconstitution and dilution. Thiotepa for Injection, USP is available in a single-dose vial containing: 1 15 mg thiotepa. After reconstitution with 1.5 mL of water for injection, each mL contains 10 mg thiotepa., 2 100 mg thiotepa. After reconstitution with 10 mL of water for injection, each mL contains 10 mg thiotepa."
},
{
"NDCCode": "71288-175-05",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (71288-175-05) / 5 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "71288-0175-05",
"ProductNDC": "71288-175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Etoposide",
"NonProprietaryName": "Etoposide",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074529",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "ETOPOSIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Topoisomerase Inhibitor [EPC], Topoisomerase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-12-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250201",
"SamplePackage": "N",
"IndicationAndUsage": "Etoposide Injection is indicated in the management of the following neoplasms.",
"Description": "Etoposide Injection, USP (also commonly known as VP-16) is a semisynthetic derivative of podophyllotoxin used in the treatment of certain neoplastic diseases. It is 4'-demethylepipodophyllotoxin 9-[4,6-0-(R)-ethylidene-β-D-glucopyranoside]. It is very soluble in methanol and chloroform, slightly soluble in ethanol, and sparingly soluble in water and ether. It is made more miscible with water by means of organic solvents. Etoposide Injection, USP is available for intravenous use as a sterile 20 mg per mL solution in 100 mg (5 mL), 500 mg (25 mL), or 1 g (50 mL) sterile, multiple dose vials. The pH of the clear, colorless to yellow solution is 3.0 to 4.0. Each mL contains: 20 mg etoposide, USP, 2 mg citric acid anhydrous, 80 mg polysorbate 80, 650 mg polyethylene glycol 300 (57.5% v/v and 65.0% w/v), and 262 mg dehydrated alcohol (33.2% v/v and 26.2% w/v). The structural formula is."
},
{
"NDCCode": "71288-182-05",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (71288-182-05) / 4 mL in 1 VIAL, SINGLE-DOSE (71288-182-04) ",
"NDC11Code": "71288-0182-05",
"ProductNDC": "71288-182",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Daunorubicin Hydrochloride",
"NonProprietaryName": "Daunorubicin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065035",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "DAUNORUBICIN HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250601",
"SamplePackage": "N",
"IndicationAndUsage": "Daunorubicin hydrochloride injection in combination with other approved anticancer drugs is indicated for remission induction in acute nonlymphocytic leukemia (myelogenous, monocytic, erythroid) of adults and for remission induction in acute lymphocytic leukemia of children and adults.",
"Description": "Daunorubicin Hydrochloride Injection consists of the hydrochloride salt of an anthracycline cytotoxic antibiotic produced by a strain of Streptomyces coeruleorubidus. It is provided as a deep red sterile liquid in vials for intravenous administration only. Each mL contains daunorubicin hydrochloride, USP equivalent to 5 mg of daunorubicin, 9 mg sodium chloride, hydrochloric acid (to adjust pH), and water for injection, q.s. It has the following structural formula which may be described with the chemical name of (1S,3S)-3-Acetyl-1,2,3,4,6,11-hexahydro-3,5,12-trihydroxy-10-methoxy-6,11-dioxo-1-naphthacenyl 3-amino-2,3,6-trideoxy-α-L-lyxo-hexopyranoside hydrochloride. C27H29NO10HCl M.W. 563.99. It is a hygroscopic crystalline powder. The pH of a 5 mg/mL aqueous solution is 3 to 4."
},
{
"NDCCode": "71288-184-05",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (71288-184-05) / 5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "71288-0184-05",
"ProductNDC": "71288-184",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Idarubicin Hydrochloride",
"NonProprietaryName": "Idarubicin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065036",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "IDARUBICIN HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250601",
"SamplePackage": "N",
"IndicationAndUsage": "Idarubicin Hydrochloride Injection in combination with other approved antileukemic drugs is indicated for the treatment of acute myeloid leukemia (AML) in adults. This includes French-American-British (FAB) classifications M1 through M7.",
"Description": "Idarubicin Hydrochloride Injection, USP contains idarubicin hydrochloride, USP and is a sterile, semi-synthetic, preservative-free solution (PFS) antineoplastic anthracycline for intravenous use. Chemically, idarubicin hydrochloride, USP is 5, 12-Naphthacenedione, 9-acetyl-7-[(3-amino-2,3,6-trideoxy-α-L-lyxo-hexopyranosyl)oxy]-7,8,9,10-tetrahydro-6,9,11-trihydroxyhydrochloride, (7S-cis). The structural formula is as follows. C26H27NO9HCl M.W. 533.95. Idarubicin Hydrochloride Injection, USP is a sterile, clear, orange-red, isotonic parenteral preservative-free solution, available in 5 mL (5 mg), 10 mL (10 mg) and 20 mL (20 mg) single-dose-only vials. Each mL contains idarubicin hydrochloride USP, 1 mg (equivalent to 0.93 mg idarubicin free base) and the following inactive ingredients: glycerin USP, 25 mg and q.s. water for injection, USP. Hydrochloric acid and/or sodium hydroxide is used to adjust pH to a target of 3.5."
},
{
"NDCCode": "71288-203-05",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (71288-203-05) / 4 mL in 1 VIAL, SINGLE-DOSE (71288-203-04) ",
"NDC11Code": "71288-0203-05",
"ProductNDC": "71288-203",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Furosemide",
"NonProprietaryName": "Furosemide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20220127",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212803",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "FUROSEMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220127",
"SamplePackage": "N",
"IndicationAndUsage": "Parenteral therapy should be reserved for patients unable to take oral medication or for patients in emergency clinical situations.",
"Description": "Furosemide is a diuretic which is an anthranilic acid derivative. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide Injection, USP 10 mg per mL is a sterile, nonpyrogenic solution in vials for intravenous and intramuscular injection. Furosemide is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, sparingly soluble in alcohol, freely soluble in dilute alkali solutions and insoluble in dilute acids. The structural formula is as follows. Each mL contains: Furosemide 10 mg, Water for Injection q.s., Sodium Chloride for isotonicity, Sodium Hydroxide and, if necessary, Hydrochloric Acid to adjust pH between 8.0 and 9.3."
},
{
"NDCCode": "71288-404-05",
"PackageDescription": "25 VIAL, MULTI-DOSE in 1 CARTON (71288-404-05) / 4 mL in 1 VIAL, MULTI-DOSE (71288-404-04) ",
"NDC11Code": "71288-0404-05",
"ProductNDC": "71288-404",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Heparin Sodium",
"NonProprietaryName": "Heparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20190615",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211007",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "HEPARIN SODIUM",
"StrengthNumber": "10000",
"StrengthUnit": "[USP'U]/mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2025-09-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190615",
"SamplePackage": "N",
"IndicationAndUsage": "Heparin Sodium Injection is indicated for: 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism;, 2 Prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease;, 3 Atrial fibrillation with embolization;, 4 Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);, 5 Prevention of clotting in arterial and cardiac surgery;, 6 Prophylaxis and treatment of peripheral arterial embolism., 7 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures.",
"Description": "Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, possessing anticoagulant properties. It is composed of polymers of alternating derivations of α-D-glucosamido (N-sulfated O-sulfated or N-acetylated) and O-sulfated uronic acid (α-L-iduronic acid or β-D-glucoronic acid). Structure of heparin sodium (representative subunits). Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Heparin Sodium Injection, USP preserved with Benzyl Alcohol is available in the following concentrations per mL. pH 5.0-7.5; sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment."
},
{
"NDCCode": "71288-408-06",
"PackageDescription": "25 VIAL, MULTI-DOSE in 1 CARTON (71288-408-06) > 5 mL in 1 VIAL, MULTI-DOSE (71288-408-05) ",
"NDC11Code": "71288-0408-06",
"ProductNDC": "71288-408",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glycopyrrolate",
"NonProprietaryName": "Glycopyrrolate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190515",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211705",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "GLYCOPYRROLATE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-10-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190515",
"EndMarketingDatePackage": "20231030",
"SamplePackage": "N",
"IndicationAndUsage": "Glycopyrrolate Injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, Glycopyrrolate Injection may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants.",
"Description": "Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains. Glycopyrrolate, USP 0.2 mg. Water for Injection, USP q.s. Benzyl Alcohol, NF 0.9% (preservative). pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.33. Its structural formula is as follows. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection, USP is a clear, colorless, sterile liquid; pH 2.0 – 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P = -1.52) at ambient room temperature (24°C)."
},
{
"NDCCode": "71288-409-05",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (71288-409-05) / 5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "71288-0409-05",
"ProductNDC": "71288-409",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Palonosetron Hydrochloride",
"NonProprietaryName": "Palonosetron Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230814",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215861",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "PALONOSETRON HYDROCHLORIDE",
"StrengthNumber": ".25",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2023-08-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230814",
"SamplePackage": "N",
"IndicationAndUsage": "Palonosetron Hydrochloride Injection is a serotonin-3 (5-HT3) receptor antagonist indicated in. Adults for prevention of: 1 acute and delayed nausea and vomiting associated with initial and repeat courses of moderately emetogenic cancer chemotherapy (MEC). (1), 2 acute nausea and vomiting associated with initial and repeat courses of highly emetogenic cancer chemotherapy (HEC). (1), 3 postoperative nausea and vomiting (PONV) for up to 24 hours following surgery. Efficacy beyond 24 hours has not been demonstrated (1).",
"Description": "Palonosetron Hydrochloride Injection contains palonosetron as palonosetron hydrochloride, an antiemetic and antinauseant agent. It is a serotonin-3 (5-HT3) receptor antagonist with a strong binding affinity for this receptor. Chemically, palonosetron hydrochloride is: (3aS)-2-[(S)-1-Azabicyclo [2.2.2]oct-3-yl]-2,3,3a,4,5,6-hexahydro-1-oxo-1Hbenz[de]isoquinoline hydrochloride. The empirical formula is C19H24N2O.HCl, with a molecular weight of 332.87. Palonosetron hydrochloride exists as a single isomer and has the following structural formula. Palonosetron hydrochloride is a white to off-white crystalline powder. It is freely soluble in water, soluble in propylene glycol, and slightly soluble in ethanol and 2-propanol. Palonosetron Hydrochloride Injection is a sterile, clear, colorless, nonpyrogenic, isotonic, buffered solution for intravenous administration. Palonosetron Hydrochloride Injection is available as a 5 mL single-dose vial. Each 5 mL vial contains: 0.25 mg palonosetron (equivalent to 0.28 mg palonosetron hydrochloride), 207.5 mg mannitol, USP, edetate disodium dihydrate, USP, and citrate and citric acid buffers in water for intravenous administration. Hydrochloric acid, NF or sodium hydroxide, NF may have been added to adjust the pH of the solution to 4.5 to 5.5."
},
{
"NDCCode": "71288-415-06",
"PackageDescription": "25 VIAL, MULTI-DOSE in 1 CARTON (71288-415-06) / 5 mL in 1 VIAL, MULTI-DOSE (71288-415-05) ",
"NDC11Code": "71288-0415-06",
"ProductNDC": "71288-415",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glycopyrrolate",
"NonProprietaryName": "Glycopyrrolate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20210706",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212802",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "GLYCOPYRROLATE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210706",
"SamplePackage": "N",
"IndicationAndUsage": "Glycopyrrolate Injection is an anticholinergic indicated. in anesthesia (adult and pediatric patients): 1 for reduction of salivary, tracheobronchial, and pharyngeal secretions, reduction of volume and acidity of gastric secretions, and blockade of cardiac inhibitory reflexes during induction of anesthesia and intubation., 2 intraoperatively to counteract surgically or drug-induced or vagal reflex-associated arrhythmias., 3 for protection against peripheral muscarinic effects of cholinergic agents. (1).",
"Description": "Glycopyrrolate is a synthetic anticholinergic agent. It is a quaternary ammonium salt with the following chemical name. 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.34. Its structural formula is as follows. C19H28BrNO3 398.34. Glycopyrrolate occurs as a white, odorless, crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. It is completely ionized at physiological pH values. Glycopyrrolate Injection, USP is a clear, colorless, sterile liquid with a pH of 2.0 to 3.0. The partition coefficient of glycopyrrolate in n-octanol/water system is 0.304 (log10 P = -1.52) at ambient room temperature (24°C). Glycopyrrolate Injection, USP is intended for intramuscular or intravenous administration. Each 1 mL contains 0.2 mg of glycopyrrolate, water for injection, and hydrochloric acid or sodium hydroxide as pH adjusters."
},
{
"NDCCode": "71288-439-05",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (71288-439-05) / 4 mL in 1 VIAL, SINGLE-USE (71288-439-04) ",
"NDC11Code": "71288-0439-05",
"ProductNDC": "71288-439",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Norepinephrine Bitartrate",
"NonProprietaryName": "Norepinephrine Bitartrate",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20241201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040455",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "NOREPINEPHRINE BITARTRATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Catecholamine [EPC], Catecholamines [CS]",
"Status": "Active",
"LastUpdate": "2024-12-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241201",
"SamplePackage": "N",
"IndicationAndUsage": "Norepinephrine Bitartrate Injection is indicated to raise blood pressure in adult patients with severe, acute hypotension.",
"Description": "Norepinephrine (sometimes referred to as l-arterenol/Levarterenol or l-norepinephrine) is a sympathomimetic amine which differs from epinephrine by the absence of a methyl group on the nitrogen atom. Norepinephrine bitartrate, USP is (-)-α-(aminomethyl)-3,4-dihydroxybenzyl alcohol tartrate (1:1) (salt) monohydrate (molecular weight 337.3 g/mol) and has the following structural formula. Norepinephrine Bitartrate Injection, USP is supplied in a sterile aqueous solution in the form of the bitartrate salt to be administered by intravenous infusion. Norepinephrine is sparingly soluble in water, very slightly soluble in alcohol and ether, and readily soluble in acids. Each mL contains 1 mg of norepinephrine base (equivalent to 1.89 mg of norepinephrine bitartrate, anhydrous basis), sodium chloride for isotonicity, not more than 2 mg of sodium metabisulfite as an antioxidant. It has a pH of 3.0 to 4.5. The air in the vials has been displaced by nitrogen gas."
},
{
"NDCCode": "71288-504-05",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (71288-504-05) / 5 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "71288-0504-05",
"ProductNDC": "71288-504",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Haloperidol Decanoate",
"NonProprietaryName": "Haloperidol Decanoate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20210726",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214507",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "HALOPERIDOL DECANOATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Typical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210726",
"SamplePackage": "N",
"IndicationAndUsage": "Haloperidol Decanoate Injection is indicated for the treatment of schizophrenia in adults who were previously taking a stable dosage of an immediate-release oral haloperidol product.",
"Description": "Haloperidol Decanoate Injection is the decanoate ester of haloperidol, for intramuscular use. Haloperidol is a typical antipsychotic. The structural formula of haloperidol decanoate is 4-(4-chlorophenyl)-1-[4-(4-fluorophenyl)-4-oxobutyl] piperidin-4-yl decanoate. The molecular formula is C31H41CIFNO3 and has a molecular weight of 530.12. Haloperidol decanoate is almost insoluble in water (0.01 mg/mL) but is soluble in most organic solvents. Each mL of Haloperidol Decanoate Injection contains: 1 50 mg of haloperidol (present as 70.52 mg of haloperidol decanoate) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative., 2 100 mg of haloperidol (present as 141.04 mg of haloperidol decanoate) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative."
},
{
"NDCCode": "71288-700-06",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 CARTON (71288-700-06) / 5 mL in 1 VIAL, MULTI-DOSE (71288-700-05) ",
"NDC11Code": "71288-0700-06",
"ProductNDC": "71288-700",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rocuronium Bromide",
"NonProprietaryName": "Rocuronium Bromide",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230508",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213453",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "ROCURONIUM BROMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2023-05-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230508",
"SamplePackage": "N",
"IndicationAndUsage": "Rocuronium Bromide Injection is indicated for inpatients and outpatients as an adjunct to general anesthesia to facilitate both rapid sequence and routine tracheal intubation, and to provide skeletal muscle relaxation during surgery or mechanical ventilation.",
"Description": "Rocuronium Bromide Injection is a nondepolarizing neuromuscular blocking agent with a rapid to intermediate onset depending on dose and intermediate duration. Rocuronium bromide is chemically designated as 1-[17β-(acetyloxy)-3α-hydroxy-2β-(4-morpholinyl)-5α-androstan-16β-yl]-1-(2-propenyl)pyrrolidinium bromide. The structural formula is. The chemical formula is C32H53BrN2O4 with a molecular weight of 609.70. The partition coefficient of rocuronium bromide in n-octanol/water is 0.5 at 20°C. Rocuronium Bromide Injection is supplied as a sterile, nonpyrogenic, isotonic solution that is clear, colorless to yellow, for intravenous injection only. Each mL contains 10 mg rocuronium bromide and 2 mg sodium acetate trihydrate. The aqueous solution is adjusted to isotonicity with sodium chloride (3.3 mg per mL) and to a pH of 4 with glacial acetic acid and/or sodium hydroxide."
},
{
"NDCCode": "71288-712-06",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (71288-712-06) / 5 mL in 1 VIAL, SINGLE-DOSE (71288-712-05) ",
"NDC11Code": "71288-0712-06",
"ProductNDC": "71288-712",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cisatracurium Besylate",
"NonProprietaryName": "Cisatracurium Besylate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20191031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211668",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "CISATRACURIUM BESYLATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2023-02-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191031",
"SamplePackage": "N",
"IndicationAndUsage": "Cisatracurium Besylate Injection is indicated: : 1 as an adjunct to general anesthesia to facilitate tracheal intubation in adults and in pediatric patients 1 month to 12 years of age , 2 to provide skeletal muscle relaxation in adults during surgical procedures or during mechanical ventilation in the ICU , 3 to provide skeletal muscle relaxation during surgical procedures via infusion in pediatric patients 2 years and older .",
"Description": "Cisatracurium besylate is a nondepolarizing skeletal neuromuscular blocker for intravenous administration. Compared to other neuromuscular blockers, it is intermediate in its onset and duration of action. Cisatracurium Besylate Injection, USP contains cisatracurium besylate as the active pharmaceutical ingredient. Cisatracurium besylate is one of 10 isomers of atracurium besylate and constitutes approximately 15% of that mixture. Cisatracurium besylate is [1R-[1α,2α(1'R*,2'R*)]]-2,2'-[1,5-pentanediylbis[oxy(3-oxo-3,1-propanediyl)]]bis[1-[(3,4-dimethoxyphenyl)methyl]-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methylisoquinolinium] dibenzenesulfonate. The molecular formula of the cisatracurium parent bis-cation is C53H72N2O12 and the molecular weight is 929.2. The molecular formula of cisatracurium as the besylate salt is C65H82N2O18S2 and the molecular weight is 1243.48. The structural formula of cisatracurium besylate is. The log of the partition coefficient of cisatracurium besylate is -2.12 in a 1-octanol/distilled water system at 25°C. Cisatracurium Besylate Injection, USP is a sterile, nonpyrogenic aqueous solution. Each mL in the single-dose vials contains either 2 mg or 10 mg of cisatracurium (equivalent to 2.68 mg and 13.38 mg of cisatracurium besylate; respectively), and benzenesulfonic acid as pH adjuster in water for injection. Each mL in the multi-dose vials contains 2 mg of cisatracurium (equivalent to 2.68 mg of cisatracurium besylate), benzenesulfonic acid as pH adjuster, and also contains 9 mg of benzyl alcohol as preservative, in water for injection. The pH of Cisatracurium Besylate Injection, USP is between 3.0 and 3.8."
},
{
"NDCCode": "71288-805-06",
"PackageDescription": "6 VIAL, SINGLE-DOSE in 1 CARTON (71288-805-06) > 5 mL in 1 VIAL, SINGLE-DOSE (71288-805-05) ",
"NDC11Code": "71288-0805-06",
"ProductNDC": "71288-805",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isosulfan Blue",
"NonProprietaryName": "Isosulfan Blue",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20211103",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213130",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "ISOSULFAN BLUE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2021-11-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20211103",
"SamplePackage": "N",
"IndicationAndUsage": "Isosulfan Blue Injection 1% upon subcutaneous administration, delineates the lymphatic vessels draining the region of injection. It is an adjunct to lymphography in: primary and secondary lymphedema of the extremities; chyluria, chylous ascites or chylothorax; lymph node involvement by primary or secondary neoplasm; lymph node response to therapeutic modalities (1.1).",
"Description": "The chemical name of Isosulfan Blue Injection 1% is N-[4-[[4-(diethylamino)phenyl] (2,5- disulfophenyl) methylene]-2,5-cyclohexadien-1-ylidene]-N-ethylethanaminium hydroxide, inner salt, sodium salt. Its structural formula is. Isosulfan Blue Injection 1% is a sterile aqueous solution for subcutaneous administration. Phosphate buffer in sterile, nonpyrogenic water is added in sufficient quantity to yield a final pH of 6.8 to 7.4. Each mL of solution contains 10 mg isosulfan blue, 6.6 mg dibasic sodium phosphate, anhydrous and 2.7 mg monobasic potassium phosphate. The solution contains no preservative. Isosulfan Blue Injection 1% is a contrast agent for the delineation of lymphatic vessels."
},
{
"NDCCode": "13551-701-05",
"PackageDescription": "473 mL in 1 BOTTLE (13551-701-05)",
"NDC11Code": "13551-0701-05",
"ProductNDC": "13551-701",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Procentra",
"NonProprietaryName": "Dextroamphetamine Sulfate",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20100801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040776",
"LabelerName": "FSC Laboratories, Inc",
"SubstanceName": "DEXTROAMPHETAMINE SULFATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Central Nervous System Stimulant [EPC],Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "14539-701-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (14539-701-05) ",
"NDC11Code": "14539-0701-05",
"ProductNDC": "14539-701",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bumetanide",
"NonProprietaryName": "Bumetanide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074225",
"LabelerName": "Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.",
"SubstanceName": "BUMETANIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20190601",
"SamplePackage": "N",
"IndicationAndUsage": "Bumetanide tablets are indicated for the treatment of edema associated with congestive heart failure, hepatic and renal disease, including the nephrotic syndrome. Almost equal diuretic response occurs after oral and parenteral administration of bumetanide. Therefore, if impaired gastrointestinal absorption is suspected or oral administration is not practical, bumetanide should be given by the intramuscular or intravenous route. Successful treatment with bumetanide tablets following instances of allergic reactions to furosemide suggests a lack of cross-sensitivity.",
"Description": "Bumetanide Tablets USP are a loop diuretic available as 0.5 mg (green), 1 mg (yellow) and 2 mg (peach) tablets for oral administration; each tablet also contains: anhydrous lactose, corn starch, magnesium stearate, microcrystalline cellulose and talc, with the following colorants: 0.5 mg (D&C Yellow No. 10 Aluminum Lake and FD&C Blue No. 1 Aluminum Lake); 1 mg (D&C Yellow No. 10 Aluminum Lake); 2 mg (Ferric oxide red). Chemically, bumetanide, USP is 3-(butylamino)-4-phenoxy-5-sulfamoylbenzoic acid. It is a practically white powder. It is slightly soluble in water and soluble in alkaline solutions. It has the following structural formula. Meets USP Dissolution Test 2."
},
{
"NDCCode": "17271-701-05",
"PackageDescription": "250 mL in 1 BAG (17271-701-05) ",
"NDC11Code": "17271-0701-05",
"ProductNDC": "17271-701",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170919",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207310",
"LabelerName": "Becton Dickinson and Company",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": "9",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2024-05-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170919",
"SamplePackage": "N",
"IndicationAndUsage": "Intravenous solutions containing sodium chloride are indicated for parenteral replenishment of fluid and sodium chloride as required by the clinical condition of the patient.",
"Description": "0.9% Sodium Chloride Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing sodium chloride in water for injection intended for intravenous administration. For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1,000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.). The pH in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solution is a parenteral fluid and electrolyte replenisher. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers."
},
{
"NDCCode": "21724-701-05",
"PackageDescription": "473 mL in 1 BOTTLE, PLASTIC (21724-701-05) ",
"NDC11Code": "21724-0701-05",
"ProductNDC": "21724-701",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Procentra",
"NonProprietaryName": "Dextroamphetamine Sulfate",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20140515",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040776",
"LabelerName": "INDEPENDENCE PHARMACEUTICALS, LLC",
"SubstanceName": "DEXTROAMPHETAMINE SULFATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2025-10-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20140515",
"SamplePackage": "N",
"IndicationAndUsage": "Dextroamphetamine Sulfate Oral Solution is indicated in:. Narcolepsy. Attention Deficit Disorder with Hyperactivity: As an integral part of a total treatment program that typically includes other remedial measures (psychological, educational, social) for a stabilizing effect in pediatric patients (ages 3 years to 16 years) with a behavioral syndrome characterized by the following group of developmentally inappropriate symptoms: Moderate to severe distractibility, short attention span, hyperactivity, emotionally lability, and impulsivity. The diagnosis of this syndrome should not be made with finality when these symptoms are only of comparatively recent origin. Nonlocalizing (soft) neurological signs, learning disability, and abnormal EEG may or may not be present, and a diagnosis of central nervous system dysfunction may or may not be warranted.",
"Description": "Dextroamphetamine sulfate is the dextro isomer of the compound d,l-amphetamine sulfate, a sympathomimetic amine of the amphetamine group. Chemically, dextroamphetamine is d-alpha-methylphenethylamine, and is present in all forms of dextroamphetamine sulfate as the neutral sulfate. Structural Formula:. Dextroamphetamine Sulfate Oral Solution is a colorless, bubblegum flavored oral solution. Each teaspoonful (5 mL) of ProCentra (dextroamphetamine sulfate) Oral Solution contains 5 mg of dextroamphetamine sulfate. Inactive ingredients consist of benzoic acid, citric acid anhydrous, purified water, sodium citrate hydrous, sodium saccharin, sorbitol solution, and artificial bubblegum flavor."
},
{
"NDCCode": "24357-701-06",
"PackageDescription": "5 TUBE in 1 CARTON (24357-701-06) / 5 g in 1 TUBE (24357-701-05) ",
"NDC11Code": "24357-0701-06",
"ProductNDC": "24357-701",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Anecream",
"NonProprietaryName": "Lidocaine 4%",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20070601",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M017",
"LabelerName": "Focus Health Group",
"SubstanceName": "LIDOCAINE",
"StrengthNumber": "4",
"StrengthUnit": "g/100g",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-01-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20110311",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves pain and itching due to: 1 minor cuts, 2 minor scrapes, 3 sunburn, 4 minor skin irritations, 5 minor burns, 6 insect bites."
},
{
"NDCCode": "24357-701-07",
"PackageDescription": "5 TUBE in 1 CARTON (24357-701-07) / 5 g in 1 TUBE (24357-701-05) ",
"NDC11Code": "24357-0701-07",
"ProductNDC": "24357-701",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Anecream",
"NonProprietaryName": "Lidocaine 4%",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20070601",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M017",
"LabelerName": "Focus Health Group",
"SubstanceName": "LIDOCAINE",
"StrengthNumber": "4",
"StrengthUnit": "g/100g",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-01-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20070601",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves pain and itching due to: 1 minor cuts, 2 minor scrapes, 3 sunburn, 4 minor skin irritations, 5 minor burns, 6 insect bites."
},
{
"NDCCode": "31722-701-05",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (31722-701-05) ",
"NDC11Code": "31722-0701-05",
"ProductNDC": "31722-701",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Losartan Potassium",
"NonProprietaryName": "Losartan Potassium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150819",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203835",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "LOSARTAN POTASSIUM",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150819",
"SamplePackage": "N",
"IndicationAndUsage": "Losartan Potassium tablets are an angiotensin II receptor blocker (ARB) indicated for: Treatment of hypertension, to lower blood pressure in adults and children greater than 6 years old. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. ( 1.1) Reduction of the risk of stroke in patients with hypertension and left ventricular hypertrophy. There is evidence that this benefit does not apply to Black patients. ( 1.2) Treatment of diabetic nephropathy with an elevated serum creatinine and proteinuria in patients with type 2 diabetes and a history of hypertension. ( 1.3).",
"Description": "Losartan potassium is an angiotensin II receptor blocker acting on the AT 1receptor subtype. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-l-[(2'-(lH-tetrazol-5-yl)[1,1'-biphenyl]-4-yl]methyl]-lH-imidazole-5-methanol mono potassium salt. Its molecular formula is C 22H 22ClKN 6O, and its structural formula is:. Losartan potassium, USP is a white to off-white powder with a molecular weight of 461.01. It is freely soluble in water and slightly soluble in acetonitrile. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Losartan potassium is available as tablets for oral administration containing either 25 mg, 50 mg or 100 mg of losartan potassium, USP and the following inactive ingredients: crospovidone, lactose monohydrate, low substituted hydroxy propyl cellulose, magnesium stearate, microcrystalline cellulose and pregelatinized starch. The tablets are coated with Opadry White which contains carnauba wax, hypromellose and titanium dioxide. Losartan potassium tablets USP, 25 mg, 50 mg and 100 mg tablets contain potassium in the following amounts: 2.12 mg (0.054 mEq), 4.24 mg (0.108 mEq) and 8.48 mg (0.216 mEq), respectively. The botanical source for pregelatinized starch is corn starch."
},
{
"NDCCode": "35000-701-05",
"PackageDescription": "14.1 g in 1 CONTAINER (35000-701-05)",
"NDC11Code": "35000-0701-05",
"ProductNDC": "35000-701",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Speed Stick",
"ProprietaryNameSuffix": "Irish Spring Original Antiperspirant Deodorant",
"NonProprietaryName": "Aluminum Zirconium Tetrachlorohydrex Gly",
"DosageFormName": "STICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20110609",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part350",
"LabelerName": "Colgate-Palmolive Company",
"SubstanceName": "ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY",
"StrengthNumber": "160",
"StrengthUnit": "mg/g",
"Status": "Deprecated",
"LastUpdate": "2019-09-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "41520-701-05",
"PackageDescription": "3 CONTAINER in 1 CARTON (41520-701-05) / 24 LOZENGE in 1 CONTAINER",
"NDC11Code": "41520-0701-05",
"ProductNDC": "41520-701",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Careone Nicotine",
"NonProprietaryName": "Nicotine Polacrilex",
"DosageFormName": "LOZENGE",
"RouteName": "ORAL",
"StartMarketingDate": "20060307",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077007",
"LabelerName": "American Sales Company",
"SubstanceName": "NICOTINE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]",
"Status": "Active",
"LastUpdate": "2023-10-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20091106",
"SamplePackage": "N",
"IndicationAndUsage": "reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking."
},
{
"NDCCode": "42385-701-50",
"PackageDescription": "50 DRUM in 1 DRUM (42385-701-50) > 25 DRUM in 1 DRUM (42385-701-25) > 20 DRUM in 1 DRUM (42385-701-20) > 10 DRUM in 1 DRUM (42385-701-10) > 5 kg in 1 DRUM (42385-701-05)",
"NDC11Code": "42385-0701-50",
"ProductNDC": "42385-701",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Efavirenz",
"DosageFormName": "POWDER",
"StartMarketingDate": "20080821",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Laurus Labs Private Limited",
"SubstanceName": "EFAVIRENZ",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "50419-701-05",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (50419-701-05)",
"NDC11Code": "50419-0701-05",
"ProductNDC": "50419-701",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Adalat Cc",
"NonProprietaryName": "Nifedipine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19930421",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020198",
"LabelerName": "Bayer HealthCare Pharmaceuticals Inc.",
"SubstanceName": "NIFEDIPINE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA],Dihydropyridine Calcium Channel Blocker [EPC],Dihydropyridines [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2017-11-15"
},
{
"NDCCode": "51407-701-05",
"PackageDescription": "5 BLISTER PACK in 1 CARTON (51407-701-05) / 1 CAPSULE in 1 BLISTER PACK (51407-701-11) ",
"NDC11Code": "51407-0701-05",
"ProductNDC": "51407-701",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aprepitant",
"NonProprietaryName": "Aprepitant",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20201021",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211835",
"LabelerName": "Golden State Medical Supply, Inc.",
"SubstanceName": "APREPITANT",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 3A4 Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Neurokinin 1 Antagonists [MoA], Substance P/Neurokinin-1 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250611",
"SamplePackage": "N",
"IndicationAndUsage": "Aprepitant is a substance P/neurokinin 1 (NK1) receptor antagonist. Aprepitant capsules are indicated. in combination with other antiemetic agents, in patients 12 years of age and older for prevention of. o acute and delayed nausea and vomiting associated with initial and repeat courses of highly emetogenic cancer chemotherapy (HEC) including high-dose cisplatin ( 1.1). o nausea and vomiting associated with initial and repeat courses of moderately emetogenic cancer chemotherapy (MEC) ( 1.1). for prevention of postoperative nausea and vomiting (PONV) in adults ( 1.2). Limitations of Use: ( 1.3). Aprepitant has not been studied for treatment of established nausea and vomiting. Chronic continuous administration of aprepitant is not recommended.",
"Description": "Aprepitant capsules, USP contain the active ingredient, aprepitant, USP. Aprepitant, USP is a substance P/neurokinin 1 (NK 1) receptor antagonist, an antiemetic agent, chemically described as 5-[[(2 R,3 S)-2-[(1 R)-1-[3,5bis(trifluoromethyl)phenyl]ethoxy]-3-(4-fluorophenyl)-4-morpholinyl]methyl]-1,2-dihydro-3 H-1,2,4-triazol-3one. Its empirical formula is C 23H 21F 7N 4O 3, and its structural formula is:. Aprepitant, USP is a white to off-white powder, with a molecular weight of 534.43. It is practically insoluble in water. Aprepitant is sparingly soluble in alcohol and slightly soluble in acetonitrile. Each capsule of aprepitant for oral administration contains either 40 mg, 80 mg, or 125 mg of aprepitant, USP and the following inactive ingredients: hypromellose 2910, poloxamer 407, sucrose, microcrystalline cellulose and imprinting ink (shellac glaze, iron oxide black and propylene glycol). The capsule shell excipients are gelatin, titanium dioxide and sodium lauryl sulfate. The 40-mg capsule shell also contains yellow ferric oxide, sodium lauryl sulfate and titanium dioxide, 80-mg capsule shell contains sodium lauryl sulfate and titanium dioxide and the 125-mg capsule contains red ferric oxide, sodium lauryl sulfate and titanium dioxide. Meets USP Dissolution Test 2."
},
{
"NDCCode": "59746-701-05",
"PackageDescription": "500 CAPSULE in 1 BOTTLE, PLASTIC (59746-701-05) ",
"NDC11Code": "59746-0701-05",
"ProductNDC": "59746-701",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxepin Hydrochloride",
"NonProprietaryName": "Doxepin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20211201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215483",
"LabelerName": "JUBILANT CADISTA PHARMACEUTICALS INC.",
"SubstanceName": "DOXEPIN HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tricyclic Antidepressant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-07-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20211201",
"SamplePackage": "N",
"IndicationAndUsage": "Doxepin Hydrochloride Capsules, USP are recommended for the treatment of: 1 Psychoneurotic patients with depression and/or anxiety. , 2 Depression and/or anxiety associated with alcoholism (not to be taken concomitantly with alcohol). , 3 Depression and/or anxiety associated with organic disease (the possibility of drug interaction should be considered if the patient is receiving other drugs concomitantly)., 4 Psychotic depressive disorders with associated anxiety including involutional depression and manic-depressive disorders.",
"Description": "Doxepin hydrochloride is one of a class of psychotherapeutic agents known as dibenzoxepin tricyclic compounds. The molecular formula of the compound is C19H21NOHCl having a molecular weight of 315.84. It is a white crystalline powder freely soluble in water, in alcohol, and methylene chloride. Each 10 mg, 25 mg, 50 mg, 75 mg and 100 mg doxepin hydrochloride capsule for oral administration contains doxepin hydrochloride USP equivalent to 10 mg, 25 mg, 50 mg, 75 mg and 100 mg of doxepin, respectively and the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch and sodium lauryl sulfate. The empty gelatin capsule shells contain gelatin, sodium lauryl sulfate, and titanium dioxide. In addition, the 25 mg and 50 mg empty gelatin capsule shells contain iron oxide yellow, 75 mg, and 100 mg empty gelatin capsule shells contain iron oxide black, iron oxide yellow, and FD&C Blue 1. The imprinting ink contains black iron oxide, potassium hydroxide, propylene glycol and shellac glaze. Doxepin hydrochloride capsules complies with USP Dissolution test 3."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>71288-701-05</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (71288-701-05) / 5 mL in 1 VIAL, SINGLE-DOSE (71288-701-06) </PackageDescription>
<NDC11Code>71288-0701-05</NDC11Code>
<ProductNDC>71288-701</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atracurium Besylate</ProprietaryName>
<NonProprietaryName>Atracurium Besylate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180515</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091488</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ATRACURIUM BESYLATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180515</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atracurium besylate injection is indicated, as an adjunct to general anesthesia, to facilitate endotracheal intubation and to provide skeletal muscle relaxation during surgery or mechanical ventilation.</IndicationAndUsage>
<Description>Atracurium besylate is an intermediate-duration, nondepolarizing, skeletal muscle relaxant for intravenous administration. Atracurium besylate is designated as 2-(2-Carboxyethyl)-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methyl-1-veratrylisoquinolinium benzenesulfonate, pentamethylene ester. It has a molecular weight of 1243.49, and its molecular formula is C65H82N2O18S2. The structural formula is. Atracurium besylate is a complex molecule containing four sites at which different stereochemical configurations can occur. The symmetry of the molecule, however, results in only ten, instead of sixteen, possible different isomers. The manufacture of atracurium besylate results in these isomers being produced in unequal amounts but with a consistent ratio. Those molecules in which the methyl group attached to the quaternary nitrogen projects on the opposite side to the adjacent substituted-benzyl moiety predominate by approximately 3:1. Atracurium Besylate Injection, USP is a sterile, non-pyrogenic aqueous solution. Each mL contains 10 mg atracurium besylate. The pH is adjusted to 3.25 to 3.65 with benzenesulfonic acid. The multiple dose vial contains 0.9% benzyl alcohol added as a preservative. Atracurium besylate injection slowly loses potency with time at the rate of approximately 6% per year under refrigeration (5°C). Atracurium besylate injection should be refrigerated at 2° to 8°C (36° to 46°F) to preserve potency. Rate of loss in potency increases to approximately 5% per month at 25°C (77°F). Upon removal from refrigeration to room temperature storage conditions (25°C / 77°F), use atracurium besylate injection within 14 days even if re-refrigerated.</Description>
</NDC>
<NDC>
<NDCCode>71288-100-05</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (71288-100-05) > 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>71288-0100-05</NDC11Code>
<ProductNDC>71288-100</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carboplatin</ProprietaryName>
<NonProprietaryName>Carboplatin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170619</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077096</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>CARBOPLATIN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Platinum-based Drug [EPC], Platinum-containing Compounds [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-12-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170619</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71288-108-06</NDCCode>
<PackageDescription>5 VIAL, SINGLE-DOSE in 1 CARTON (71288-108-06) > 5 mL in 1 VIAL, SINGLE-DOSE (71288-108-05) </PackageDescription>
<NDC11Code>71288-0108-06</NDC11Code>
<ProductNDC>71288-108</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cytarabine</ProprietaryName>
<NonProprietaryName>Cytarabine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRATHECAL; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20200626</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206189</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>CYTARABINE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-01-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200626</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cytarabine Injection in combination with other approved anti-cancer drugs is indicated for remission induction in acute non-lymphocytic leukemia of adults and pediatric patients. It has also been found useful in the treatment of acute lymphocytic leukemia and the blast phase of chronic myelocytic leukemia. Intrathecal administration of Cytarabine Injection (preservative free preparations only) is indicated in the prophylaxis and treatment of meningeal leukemia.</IndicationAndUsage>
<Description>Cytarabine Injection 100 mg per 5 mL (20 mg per mL), an antineoplastic, is a sterile solution of cytarabine for intravenous, intrathecal or subcutaneous administration. Each mL contains 20 mg Cytarabine, USP (20 mg per mL) in a single dose vial (100 mg per 5 mL). Cytarabine Injection 100 mg per 5 mL is a sterile solution for intravenous, intrathecal or subcutaneous administration. Each mL contains 20 mg Cytarabine, USP, and the following inactive ingredients: sodium chloride 6.8 mg and Water for Injection q.s. When necessary the pH is adjusted with hydrochloric acid and/or sodium hydroxide to a pH of 7.4. Each vial contains approximately 0.58 mEq sodium. Cytarabine is chemically 1-β-D-Arabinofuranosylcytosine. The structural formula is:. Cytarabine is an odorless, white to off-white crystalline powder which is freely soluble in water and slightly soluble in alcohol and in chloroform.</Description>
</NDC>
<NDC>
<NDCCode>71288-156-05</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (71288-156-05) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>71288-0156-05</NDC11Code>
<ProductNDC>71288-156</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Thiotepa</ProprietaryName>
<NonProprietaryName>Thiotepa</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRACAVITARY; INTRAVENOUS; INTRAVESICAL</RouteName>
<StartMarketingDate>20231226</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216037</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc</LabelerName>
<SubstanceName>THIOTEPA</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA], Alkylating Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-12-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231226</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Thiotepa for Injection is an alkylating drug indicated: 1 For treatment of adenocarcinoma of the breast or ovary. (1.2), 2 For controlling intracavitary effusions secondary to diffuse or localized neoplastic diseases of various serosal cavities. (1.3), 3 For treatment of superficial papillary carcinoma of the urinary bladder. (1.4).</IndicationAndUsage>
<Description>Thiotepa for Injection, USP is an alkylating agent. Thiotepa for Injection, USP is supplied as a nonpyrogenic, sterile, white lyophilized powder or lyophilized cake for intravenous, intracavitary, or intravesical use after reconstitution and dilution. Thiotepa for Injection, USP is available in a single-dose vial containing: 1 15 mg thiotepa. After reconstitution with 1.5 mL of water for injection, each mL contains 10 mg thiotepa., 2 100 mg thiotepa. After reconstitution with 10 mL of water for injection, each mL contains 10 mg thiotepa.</Description>
</NDC>
<NDC>
<NDCCode>71288-175-05</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (71288-175-05) / 5 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>71288-0175-05</NDC11Code>
<ProductNDC>71288-175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Etoposide</ProprietaryName>
<NonProprietaryName>Etoposide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074529</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ETOPOSIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Topoisomerase Inhibitor [EPC], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Etoposide Injection is indicated in the management of the following neoplasms.</IndicationAndUsage>
<Description>Etoposide Injection, USP (also commonly known as VP-16) is a semisynthetic derivative of podophyllotoxin used in the treatment of certain neoplastic diseases. It is 4'-demethylepipodophyllotoxin 9-[4,6-0-(R)-ethylidene-β-D-glucopyranoside]. It is very soluble in methanol and chloroform, slightly soluble in ethanol, and sparingly soluble in water and ether. It is made more miscible with water by means of organic solvents. Etoposide Injection, USP is available for intravenous use as a sterile 20 mg per mL solution in 100 mg (5 mL), 500 mg (25 mL), or 1 g (50 mL) sterile, multiple dose vials. The pH of the clear, colorless to yellow solution is 3.0 to 4.0. Each mL contains: 20 mg etoposide, USP, 2 mg citric acid anhydrous, 80 mg polysorbate 80, 650 mg polyethylene glycol 300 (57.5% v/v and 65.0% w/v), and 262 mg dehydrated alcohol (33.2% v/v and 26.2% w/v). The structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>71288-182-05</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (71288-182-05) / 4 mL in 1 VIAL, SINGLE-DOSE (71288-182-04) </PackageDescription>
<NDC11Code>71288-0182-05</NDC11Code>
<ProductNDC>71288-182</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Daunorubicin Hydrochloride</ProprietaryName>
<NonProprietaryName>Daunorubicin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065035</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>DAUNORUBICIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Daunorubicin hydrochloride injection in combination with other approved anticancer drugs is indicated for remission induction in acute nonlymphocytic leukemia (myelogenous, monocytic, erythroid) of adults and for remission induction in acute lymphocytic leukemia of children and adults.</IndicationAndUsage>
<Description>Daunorubicin Hydrochloride Injection consists of the hydrochloride salt of an anthracycline cytotoxic antibiotic produced by a strain of Streptomyces coeruleorubidus. It is provided as a deep red sterile liquid in vials for intravenous administration only. Each mL contains daunorubicin hydrochloride, USP equivalent to 5 mg of daunorubicin, 9 mg sodium chloride, hydrochloric acid (to adjust pH), and water for injection, q.s. It has the following structural formula which may be described with the chemical name of (1S,3S)-3-Acetyl-1,2,3,4,6,11-hexahydro-3,5,12-trihydroxy-10-methoxy-6,11-dioxo-1-naphthacenyl 3-amino-2,3,6-trideoxy-α-L-lyxo-hexopyranoside hydrochloride. C27H29NO10HCl M.W. 563.99. It is a hygroscopic crystalline powder. The pH of a 5 mg/mL aqueous solution is 3 to 4.</Description>
</NDC>
<NDC>
<NDCCode>71288-184-05</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (71288-184-05) / 5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>71288-0184-05</NDC11Code>
<ProductNDC>71288-184</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Idarubicin Hydrochloride</ProprietaryName>
<NonProprietaryName>Idarubicin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065036</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>IDARUBICIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Idarubicin Hydrochloride Injection in combination with other approved antileukemic drugs is indicated for the treatment of acute myeloid leukemia (AML) in adults. This includes French-American-British (FAB) classifications M1 through M7.</IndicationAndUsage>
<Description>Idarubicin Hydrochloride Injection, USP contains idarubicin hydrochloride, USP and is a sterile, semi-synthetic, preservative-free solution (PFS) antineoplastic anthracycline for intravenous use. Chemically, idarubicin hydrochloride, USP is 5, 12-Naphthacenedione, 9-acetyl-7-[(3-amino-2,3,6-trideoxy-α-L-lyxo-hexopyranosyl)oxy]-7,8,9,10-tetrahydro-6,9,11-trihydroxyhydrochloride, (7S-cis). The structural formula is as follows. C26H27NO9HCl M.W. 533.95. Idarubicin Hydrochloride Injection, USP is a sterile, clear, orange-red, isotonic parenteral preservative-free solution, available in 5 mL (5 mg), 10 mL (10 mg) and 20 mL (20 mg) single-dose-only vials. Each mL contains idarubicin hydrochloride USP, 1 mg (equivalent to 0.93 mg idarubicin free base) and the following inactive ingredients: glycerin USP, 25 mg and q.s. water for injection, USP. Hydrochloric acid and/or sodium hydroxide is used to adjust pH to a target of 3.5.</Description>
</NDC>
<NDC>
<NDCCode>71288-203-05</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (71288-203-05) / 4 mL in 1 VIAL, SINGLE-DOSE (71288-203-04) </PackageDescription>
<NDC11Code>71288-0203-05</NDC11Code>
<ProductNDC>71288-203</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Furosemide</ProprietaryName>
<NonProprietaryName>Furosemide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20220127</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212803</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>FUROSEMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220127</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Parenteral therapy should be reserved for patients unable to take oral medication or for patients in emergency clinical situations.</IndicationAndUsage>
<Description>Furosemide is a diuretic which is an anthranilic acid derivative. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide Injection, USP 10 mg per mL is a sterile, nonpyrogenic solution in vials for intravenous and intramuscular injection. Furosemide is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, sparingly soluble in alcohol, freely soluble in dilute alkali solutions and insoluble in dilute acids. The structural formula is as follows. Each mL contains: Furosemide 10 mg, Water for Injection q.s., Sodium Chloride for isotonicity, Sodium Hydroxide and, if necessary, Hydrochloric Acid to adjust pH between 8.0 and 9.3.</Description>
</NDC>
<NDC>
<NDCCode>71288-404-05</NDCCode>
<PackageDescription>25 VIAL, MULTI-DOSE in 1 CARTON (71288-404-05) / 4 mL in 1 VIAL, MULTI-DOSE (71288-404-04) </PackageDescription>
<NDC11Code>71288-0404-05</NDC11Code>
<ProductNDC>71288-404</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Heparin Sodium</ProprietaryName>
<NonProprietaryName>Heparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190615</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211007</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>HEPARIN SODIUM</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[USP'U]/mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Heparin Sodium Injection is indicated for: 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism;, 2 Prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease;, 3 Atrial fibrillation with embolization;, 4 Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);, 5 Prevention of clotting in arterial and cardiac surgery;, 6 Prophylaxis and treatment of peripheral arterial embolism., 7 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures.</IndicationAndUsage>
<Description>Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, possessing anticoagulant properties. It is composed of polymers of alternating derivations of α-D-glucosamido (N-sulfated O-sulfated or N-acetylated) and O-sulfated uronic acid (α-L-iduronic acid or β-D-glucoronic acid). Structure of heparin sodium (representative subunits). Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Heparin Sodium Injection, USP preserved with Benzyl Alcohol is available in the following concentrations per mL. pH 5.0-7.5; sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>71288-408-06</NDCCode>
<PackageDescription>25 VIAL, MULTI-DOSE in 1 CARTON (71288-408-06) > 5 mL in 1 VIAL, MULTI-DOSE (71288-408-05) </PackageDescription>
<NDC11Code>71288-0408-06</NDC11Code>
<ProductNDC>71288-408</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glycopyrrolate</ProprietaryName>
<NonProprietaryName>Glycopyrrolate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190515</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211705</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>GLYCOPYRROLATE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-10-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190515</StartMarketingDatePackage>
<EndMarketingDatePackage>20231030</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glycopyrrolate Injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, Glycopyrrolate Injection may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants.</IndicationAndUsage>
<Description>Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains. Glycopyrrolate, USP 0.2 mg. Water for Injection, USP q.s. Benzyl Alcohol, NF 0.9% (preservative). pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.33. Its structural formula is as follows. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection, USP is a clear, colorless, sterile liquid; pH 2.0 – 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P = -1.52) at ambient room temperature (24°C).</Description>
</NDC>
<NDC>
<NDCCode>71288-409-05</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (71288-409-05) / 5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>71288-0409-05</NDC11Code>
<ProductNDC>71288-409</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Palonosetron Hydrochloride</ProprietaryName>
<NonProprietaryName>Palonosetron Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230814</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215861</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>PALONOSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-08-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230814</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Palonosetron Hydrochloride Injection is a serotonin-3 (5-HT3) receptor antagonist indicated in. Adults for prevention of: 1 acute and delayed nausea and vomiting associated with initial and repeat courses of moderately emetogenic cancer chemotherapy (MEC). (1), 2 acute nausea and vomiting associated with initial and repeat courses of highly emetogenic cancer chemotherapy (HEC). (1), 3 postoperative nausea and vomiting (PONV) for up to 24 hours following surgery. Efficacy beyond 24 hours has not been demonstrated (1).</IndicationAndUsage>
<Description>Palonosetron Hydrochloride Injection contains palonosetron as palonosetron hydrochloride, an antiemetic and antinauseant agent. It is a serotonin-3 (5-HT3) receptor antagonist with a strong binding affinity for this receptor. Chemically, palonosetron hydrochloride is: (3aS)-2-[(S)-1-Azabicyclo [2.2.2]oct-3-yl]-2,3,3a,4,5,6-hexahydro-1-oxo-1Hbenz[de]isoquinoline hydrochloride. The empirical formula is C19H24N2O.HCl, with a molecular weight of 332.87. Palonosetron hydrochloride exists as a single isomer and has the following structural formula. Palonosetron hydrochloride is a white to off-white crystalline powder. It is freely soluble in water, soluble in propylene glycol, and slightly soluble in ethanol and 2-propanol. Palonosetron Hydrochloride Injection is a sterile, clear, colorless, nonpyrogenic, isotonic, buffered solution for intravenous administration. Palonosetron Hydrochloride Injection is available as a 5 mL single-dose vial. Each 5 mL vial contains: 0.25 mg palonosetron (equivalent to 0.28 mg palonosetron hydrochloride), 207.5 mg mannitol, USP, edetate disodium dihydrate, USP, and citrate and citric acid buffers in water for intravenous administration. Hydrochloric acid, NF or sodium hydroxide, NF may have been added to adjust the pH of the solution to 4.5 to 5.5.</Description>
</NDC>
<NDC>
<NDCCode>71288-415-06</NDCCode>
<PackageDescription>25 VIAL, MULTI-DOSE in 1 CARTON (71288-415-06) / 5 mL in 1 VIAL, MULTI-DOSE (71288-415-05) </PackageDescription>
<NDC11Code>71288-0415-06</NDC11Code>
<ProductNDC>71288-415</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glycopyrrolate</ProprietaryName>
<NonProprietaryName>Glycopyrrolate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20210706</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212802</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>GLYCOPYRROLATE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210706</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glycopyrrolate Injection is an anticholinergic indicated. in anesthesia (adult and pediatric patients): 1 for reduction of salivary, tracheobronchial, and pharyngeal secretions, reduction of volume and acidity of gastric secretions, and blockade of cardiac inhibitory reflexes during induction of anesthesia and intubation., 2 intraoperatively to counteract surgically or drug-induced or vagal reflex-associated arrhythmias., 3 for protection against peripheral muscarinic effects of cholinergic agents. (1).</IndicationAndUsage>
<Description>Glycopyrrolate is a synthetic anticholinergic agent. It is a quaternary ammonium salt with the following chemical name. 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.34. Its structural formula is as follows. C19H28BrNO3 398.34. Glycopyrrolate occurs as a white, odorless, crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. It is completely ionized at physiological pH values. Glycopyrrolate Injection, USP is a clear, colorless, sterile liquid with a pH of 2.0 to 3.0. The partition coefficient of glycopyrrolate in n-octanol/water system is 0.304 (log10 P = -1.52) at ambient room temperature (24°C). Glycopyrrolate Injection, USP is intended for intramuscular or intravenous administration. Each 1 mL contains 0.2 mg of glycopyrrolate, water for injection, and hydrochloric acid or sodium hydroxide as pH adjusters.</Description>
</NDC>
<NDC>
<NDCCode>71288-439-05</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (71288-439-05) / 4 mL in 1 VIAL, SINGLE-USE (71288-439-04) </PackageDescription>
<NDC11Code>71288-0439-05</NDC11Code>
<ProductNDC>71288-439</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Norepinephrine Bitartrate</ProprietaryName>
<NonProprietaryName>Norepinephrine Bitartrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20241201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040455</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>NOREPINEPHRINE BITARTRATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Catecholamine [EPC], Catecholamines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Norepinephrine Bitartrate Injection is indicated to raise blood pressure in adult patients with severe, acute hypotension.</IndicationAndUsage>
<Description>Norepinephrine (sometimes referred to as l-arterenol/Levarterenol or l-norepinephrine) is a sympathomimetic amine which differs from epinephrine by the absence of a methyl group on the nitrogen atom. Norepinephrine bitartrate, USP is (-)-α-(aminomethyl)-3,4-dihydroxybenzyl alcohol tartrate (1:1) (salt) monohydrate (molecular weight 337.3 g/mol) and has the following structural formula. Norepinephrine Bitartrate Injection, USP is supplied in a sterile aqueous solution in the form of the bitartrate salt to be administered by intravenous infusion. Norepinephrine is sparingly soluble in water, very slightly soluble in alcohol and ether, and readily soluble in acids. Each mL contains 1 mg of norepinephrine base (equivalent to 1.89 mg of norepinephrine bitartrate, anhydrous basis), sodium chloride for isotonicity, not more than 2 mg of sodium metabisulfite as an antioxidant. It has a pH of 3.0 to 4.5. The air in the vials has been displaced by nitrogen gas.</Description>
</NDC>
<NDC>
<NDCCode>71288-504-05</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (71288-504-05) / 5 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>71288-0504-05</NDC11Code>
<ProductNDC>71288-504</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Haloperidol Decanoate</ProprietaryName>
<NonProprietaryName>Haloperidol Decanoate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20210726</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214507</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>HALOPERIDOL DECANOATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Typical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210726</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Haloperidol Decanoate Injection is indicated for the treatment of schizophrenia in adults who were previously taking a stable dosage of an immediate-release oral haloperidol product.</IndicationAndUsage>
<Description>Haloperidol Decanoate Injection is the decanoate ester of haloperidol, for intramuscular use. Haloperidol is a typical antipsychotic. The structural formula of haloperidol decanoate is 4-(4-chlorophenyl)-1-[4-(4-fluorophenyl)-4-oxobutyl] piperidin-4-yl decanoate. The molecular formula is C31H41CIFNO3 and has a molecular weight of 530.12. Haloperidol decanoate is almost insoluble in water (0.01 mg/mL) but is soluble in most organic solvents. Each mL of Haloperidol Decanoate Injection contains: 1 50 mg of haloperidol (present as 70.52 mg of haloperidol decanoate) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative., 2 100 mg of haloperidol (present as 141.04 mg of haloperidol decanoate) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative.</Description>
</NDC>
<NDC>
<NDCCode>71288-700-06</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (71288-700-06) / 5 mL in 1 VIAL, MULTI-DOSE (71288-700-05) </PackageDescription>
<NDC11Code>71288-0700-06</NDC11Code>
<ProductNDC>71288-700</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rocuronium Bromide</ProprietaryName>
<NonProprietaryName>Rocuronium Bromide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230508</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213453</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ROCURONIUM BROMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-05-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230508</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rocuronium Bromide Injection is indicated for inpatients and outpatients as an adjunct to general anesthesia to facilitate both rapid sequence and routine tracheal intubation, and to provide skeletal muscle relaxation during surgery or mechanical ventilation.</IndicationAndUsage>
<Description>Rocuronium Bromide Injection is a nondepolarizing neuromuscular blocking agent with a rapid to intermediate onset depending on dose and intermediate duration. Rocuronium bromide is chemically designated as 1-[17β-(acetyloxy)-3α-hydroxy-2β-(4-morpholinyl)-5α-androstan-16β-yl]-1-(2-propenyl)pyrrolidinium bromide. The structural formula is. The chemical formula is C32H53BrN2O4 with a molecular weight of 609.70. The partition coefficient of rocuronium bromide in n-octanol/water is 0.5 at 20°C. Rocuronium Bromide Injection is supplied as a sterile, nonpyrogenic, isotonic solution that is clear, colorless to yellow, for intravenous injection only. Each mL contains 10 mg rocuronium bromide and 2 mg sodium acetate trihydrate. The aqueous solution is adjusted to isotonicity with sodium chloride (3.3 mg per mL) and to a pH of 4 with glacial acetic acid and/or sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>71288-712-06</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (71288-712-06) / 5 mL in 1 VIAL, SINGLE-DOSE (71288-712-05) </PackageDescription>
<NDC11Code>71288-0712-06</NDC11Code>
<ProductNDC>71288-712</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cisatracurium Besylate</ProprietaryName>
<NonProprietaryName>Cisatracurium Besylate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20191031</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211668</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>CISATRACURIUM BESYLATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-02-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cisatracurium Besylate Injection is indicated: : 1 as an adjunct to general anesthesia to facilitate tracheal intubation in adults and in pediatric patients 1 month to 12 years of age , 2 to provide skeletal muscle relaxation in adults during surgical procedures or during mechanical ventilation in the ICU , 3 to provide skeletal muscle relaxation during surgical procedures via infusion in pediatric patients 2 years and older .</IndicationAndUsage>
<Description>Cisatracurium besylate is a nondepolarizing skeletal neuromuscular blocker for intravenous administration. Compared to other neuromuscular blockers, it is intermediate in its onset and duration of action. Cisatracurium Besylate Injection, USP contains cisatracurium besylate as the active pharmaceutical ingredient. Cisatracurium besylate is one of 10 isomers of atracurium besylate and constitutes approximately 15% of that mixture. Cisatracurium besylate is [1R-[1α,2α(1'R*,2'R*)]]-2,2'-[1,5-pentanediylbis[oxy(3-oxo-3,1-propanediyl)]]bis[1-[(3,4-dimethoxyphenyl)methyl]-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methylisoquinolinium] dibenzenesulfonate. The molecular formula of the cisatracurium parent bis-cation is C53H72N2O12 and the molecular weight is 929.2. The molecular formula of cisatracurium as the besylate salt is C65H82N2O18S2 and the molecular weight is 1243.48. The structural formula of cisatracurium besylate is. The log of the partition coefficient of cisatracurium besylate is -2.12 in a 1-octanol/distilled water system at 25°C. Cisatracurium Besylate Injection, USP is a sterile, nonpyrogenic aqueous solution. Each mL in the single-dose vials contains either 2 mg or 10 mg of cisatracurium (equivalent to 2.68 mg and 13.38 mg of cisatracurium besylate; respectively), and benzenesulfonic acid as pH adjuster in water for injection. Each mL in the multi-dose vials contains 2 mg of cisatracurium (equivalent to 2.68 mg of cisatracurium besylate), benzenesulfonic acid as pH adjuster, and also contains 9 mg of benzyl alcohol as preservative, in water for injection. The pH of Cisatracurium Besylate Injection, USP is between 3.0 and 3.8.</Description>
</NDC>
<NDC>
<NDCCode>71288-805-06</NDCCode>
<PackageDescription>6 VIAL, SINGLE-DOSE in 1 CARTON (71288-805-06) > 5 mL in 1 VIAL, SINGLE-DOSE (71288-805-05) </PackageDescription>
<NDC11Code>71288-0805-06</NDC11Code>
<ProductNDC>71288-805</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isosulfan Blue</ProprietaryName>
<NonProprietaryName>Isosulfan Blue</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20211103</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213130</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ISOSULFAN BLUE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2021-11-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211103</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Isosulfan Blue Injection 1% upon subcutaneous administration, delineates the lymphatic vessels draining the region of injection. It is an adjunct to lymphography in: primary and secondary lymphedema of the extremities; chyluria, chylous ascites or chylothorax; lymph node involvement by primary or secondary neoplasm; lymph node response to therapeutic modalities (1.1).</IndicationAndUsage>
<Description>The chemical name of Isosulfan Blue Injection 1% is N-[4-[[4-(diethylamino)phenyl] (2,5- disulfophenyl) methylene]-2,5-cyclohexadien-1-ylidene]-N-ethylethanaminium hydroxide, inner salt, sodium salt. Its structural formula is. Isosulfan Blue Injection 1% is a sterile aqueous solution for subcutaneous administration. Phosphate buffer in sterile, nonpyrogenic water is added in sufficient quantity to yield a final pH of 6.8 to 7.4. Each mL of solution contains 10 mg isosulfan blue, 6.6 mg dibasic sodium phosphate, anhydrous and 2.7 mg monobasic potassium phosphate. The solution contains no preservative. Isosulfan Blue Injection 1% is a contrast agent for the delineation of lymphatic vessels.</Description>
</NDC>
<NDC>
<NDCCode>13551-701-05</NDCCode>
<PackageDescription>473 mL in 1 BOTTLE (13551-701-05)</PackageDescription>
<NDC11Code>13551-0701-05</NDC11Code>
<ProductNDC>13551-701</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Procentra</ProprietaryName>
<NonProprietaryName>Dextroamphetamine Sulfate</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040776</ApplicationNumber>
<LabelerName>FSC Laboratories, Inc</LabelerName>
<SubstanceName>DEXTROAMPHETAMINE SULFATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC],Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>14539-701-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (14539-701-05) </PackageDescription>
<NDC11Code>14539-0701-05</NDC11Code>
<ProductNDC>14539-701</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bumetanide</ProprietaryName>
<NonProprietaryName>Bumetanide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074225</ApplicationNumber>
<LabelerName>Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.</LabelerName>
<SubstanceName>BUMETANIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bumetanide tablets are indicated for the treatment of edema associated with congestive heart failure, hepatic and renal disease, including the nephrotic syndrome. Almost equal diuretic response occurs after oral and parenteral administration of bumetanide. Therefore, if impaired gastrointestinal absorption is suspected or oral administration is not practical, bumetanide should be given by the intramuscular or intravenous route. Successful treatment with bumetanide tablets following instances of allergic reactions to furosemide suggests a lack of cross-sensitivity.</IndicationAndUsage>
<Description>Bumetanide Tablets USP are a loop diuretic available as 0.5 mg (green), 1 mg (yellow) and 2 mg (peach) tablets for oral administration; each tablet also contains: anhydrous lactose, corn starch, magnesium stearate, microcrystalline cellulose and talc, with the following colorants: 0.5 mg (D&C Yellow No. 10 Aluminum Lake and FD&C Blue No. 1 Aluminum Lake); 1 mg (D&C Yellow No. 10 Aluminum Lake); 2 mg (Ferric oxide red). Chemically, bumetanide, USP is 3-(butylamino)-4-phenoxy-5-sulfamoylbenzoic acid. It is a practically white powder. It is slightly soluble in water and soluble in alkaline solutions. It has the following structural formula. Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>17271-701-05</NDCCode>
<PackageDescription>250 mL in 1 BAG (17271-701-05) </PackageDescription>
<NDC11Code>17271-0701-05</NDC11Code>
<ProductNDC>17271-701</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170919</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207310</ApplicationNumber>
<LabelerName>Becton Dickinson and Company</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>9</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170919</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Intravenous solutions containing sodium chloride are indicated for parenteral replenishment of fluid and sodium chloride as required by the clinical condition of the patient.</IndicationAndUsage>
<Description>0.9% Sodium Chloride Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing sodium chloride in water for injection intended for intravenous administration. For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1,000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.). The pH in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solution is a parenteral fluid and electrolyte replenisher. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
</NDC>
<NDC>
<NDCCode>21724-701-05</NDCCode>
<PackageDescription>473 mL in 1 BOTTLE, PLASTIC (21724-701-05) </PackageDescription>
<NDC11Code>21724-0701-05</NDC11Code>
<ProductNDC>21724-701</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Procentra</ProprietaryName>
<NonProprietaryName>Dextroamphetamine Sulfate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140515</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040776</ApplicationNumber>
<LabelerName>INDEPENDENCE PHARMACEUTICALS, LLC</LabelerName>
<SubstanceName>DEXTROAMPHETAMINE SULFATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-10-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140515</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextroamphetamine Sulfate Oral Solution is indicated in:. Narcolepsy. Attention Deficit Disorder with Hyperactivity: As an integral part of a total treatment program that typically includes other remedial measures (psychological, educational, social) for a stabilizing effect in pediatric patients (ages 3 years to 16 years) with a behavioral syndrome characterized by the following group of developmentally inappropriate symptoms: Moderate to severe distractibility, short attention span, hyperactivity, emotionally lability, and impulsivity. The diagnosis of this syndrome should not be made with finality when these symptoms are only of comparatively recent origin. Nonlocalizing (soft) neurological signs, learning disability, and abnormal EEG may or may not be present, and a diagnosis of central nervous system dysfunction may or may not be warranted.</IndicationAndUsage>
<Description>Dextroamphetamine sulfate is the dextro isomer of the compound d,l-amphetamine sulfate, a sympathomimetic amine of the amphetamine group. Chemically, dextroamphetamine is d-alpha-methylphenethylamine, and is present in all forms of dextroamphetamine sulfate as the neutral sulfate. Structural Formula:. Dextroamphetamine Sulfate Oral Solution is a colorless, bubblegum flavored oral solution. Each teaspoonful (5 mL) of ProCentra (dextroamphetamine sulfate) Oral Solution contains 5 mg of dextroamphetamine sulfate. Inactive ingredients consist of benzoic acid, citric acid anhydrous, purified water, sodium citrate hydrous, sodium saccharin, sorbitol solution, and artificial bubblegum flavor.</Description>
</NDC>
<NDC>
<NDCCode>24357-701-06</NDCCode>
<PackageDescription>5 TUBE in 1 CARTON (24357-701-06) / 5 g in 1 TUBE (24357-701-05) </PackageDescription>
<NDC11Code>24357-0701-06</NDC11Code>
<ProductNDC>24357-701</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Anecream</ProprietaryName>
<NonProprietaryName>Lidocaine 4%</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20070601</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M017</ApplicationNumber>
<LabelerName>Focus Health Group</LabelerName>
<SubstanceName>LIDOCAINE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110311</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves pain and itching due to: 1 minor cuts, 2 minor scrapes, 3 sunburn, 4 minor skin irritations, 5 minor burns, 6 insect bites.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>24357-701-07</NDCCode>
<PackageDescription>5 TUBE in 1 CARTON (24357-701-07) / 5 g in 1 TUBE (24357-701-05) </PackageDescription>
<NDC11Code>24357-0701-07</NDC11Code>
<ProductNDC>24357-701</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Anecream</ProprietaryName>
<NonProprietaryName>Lidocaine 4%</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20070601</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M017</ApplicationNumber>
<LabelerName>Focus Health Group</LabelerName>
<SubstanceName>LIDOCAINE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves pain and itching due to: 1 minor cuts, 2 minor scrapes, 3 sunburn, 4 minor skin irritations, 5 minor burns, 6 insect bites.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>31722-701-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (31722-701-05) </PackageDescription>
<NDC11Code>31722-0701-05</NDC11Code>
<ProductNDC>31722-701</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Losartan Potassium</ProprietaryName>
<NonProprietaryName>Losartan Potassium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150819</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203835</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LOSARTAN POTASSIUM</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150819</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Losartan Potassium tablets are an angiotensin II receptor blocker (ARB) indicated for: Treatment of hypertension, to lower blood pressure in adults and children greater than 6 years old. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. ( 1.1) Reduction of the risk of stroke in patients with hypertension and left ventricular hypertrophy. There is evidence that this benefit does not apply to Black patients. ( 1.2) Treatment of diabetic nephropathy with an elevated serum creatinine and proteinuria in patients with type 2 diabetes and a history of hypertension. ( 1.3).</IndicationAndUsage>
<Description>Losartan potassium is an angiotensin II receptor blocker acting on the AT 1receptor subtype. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-l-[(2'-(lH-tetrazol-5-yl)[1,1'-biphenyl]-4-yl]methyl]-lH-imidazole-5-methanol mono potassium salt. Its molecular formula is C 22H 22ClKN 6O, and its structural formula is:. Losartan potassium, USP is a white to off-white powder with a molecular weight of 461.01. It is freely soluble in water and slightly soluble in acetonitrile. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Losartan potassium is available as tablets for oral administration containing either 25 mg, 50 mg or 100 mg of losartan potassium, USP and the following inactive ingredients: crospovidone, lactose monohydrate, low substituted hydroxy propyl cellulose, magnesium stearate, microcrystalline cellulose and pregelatinized starch. The tablets are coated with Opadry White which contains carnauba wax, hypromellose and titanium dioxide. Losartan potassium tablets USP, 25 mg, 50 mg and 100 mg tablets contain potassium in the following amounts: 2.12 mg (0.054 mEq), 4.24 mg (0.108 mEq) and 8.48 mg (0.216 mEq), respectively. The botanical source for pregelatinized starch is corn starch.</Description>
</NDC>
<NDC>
<NDCCode>35000-701-05</NDCCode>
<PackageDescription>14.1 g in 1 CONTAINER (35000-701-05)</PackageDescription>
<NDC11Code>35000-0701-05</NDC11Code>
<ProductNDC>35000-701</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Speed Stick</ProprietaryName>
<ProprietaryNameSuffix>Irish Spring Original Antiperspirant Deodorant</ProprietaryNameSuffix>
<NonProprietaryName>Aluminum Zirconium Tetrachlorohydrex Gly</NonProprietaryName>
<DosageFormName>STICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20110609</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part350</ApplicationNumber>
<LabelerName>Colgate-Palmolive Company</LabelerName>
<SubstanceName>ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY</SubstanceName>
<StrengthNumber>160</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>41520-701-05</NDCCode>
<PackageDescription>3 CONTAINER in 1 CARTON (41520-701-05) / 24 LOZENGE in 1 CONTAINER</PackageDescription>
<NDC11Code>41520-0701-05</NDC11Code>
<ProductNDC>41520-701</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Careone Nicotine</ProprietaryName>
<NonProprietaryName>Nicotine Polacrilex</NonProprietaryName>
<DosageFormName>LOZENGE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060307</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077007</ApplicationNumber>
<LabelerName>American Sales Company</LabelerName>
<SubstanceName>NICOTINE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-10-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20091106</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>42385-701-50</NDCCode>
<PackageDescription>50 DRUM in 1 DRUM (42385-701-50) > 25 DRUM in 1 DRUM (42385-701-25) > 20 DRUM in 1 DRUM (42385-701-20) > 10 DRUM in 1 DRUM (42385-701-10) > 5 kg in 1 DRUM (42385-701-05)</PackageDescription>
<NDC11Code>42385-0701-50</NDC11Code>
<ProductNDC>42385-701</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Efavirenz</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20080821</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Laurus Labs Private Limited</LabelerName>
<SubstanceName>EFAVIRENZ</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>50419-701-05</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (50419-701-05)</PackageDescription>
<NDC11Code>50419-0701-05</NDC11Code>
<ProductNDC>50419-701</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Adalat Cc</ProprietaryName>
<NonProprietaryName>Nifedipine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19930421</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020198</ApplicationNumber>
<LabelerName>Bayer HealthCare Pharmaceuticals Inc.</LabelerName>
<SubstanceName>NIFEDIPINE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA],Dihydropyridine Calcium Channel Blocker [EPC],Dihydropyridines [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-11-15</LastUpdate>
</NDC>
<NDC>
<NDCCode>51407-701-05</NDCCode>
<PackageDescription>5 BLISTER PACK in 1 CARTON (51407-701-05) / 1 CAPSULE in 1 BLISTER PACK (51407-701-11) </PackageDescription>
<NDC11Code>51407-0701-05</NDC11Code>
<ProductNDC>51407-701</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aprepitant</ProprietaryName>
<NonProprietaryName>Aprepitant</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201021</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211835</ApplicationNumber>
<LabelerName>Golden State Medical Supply, Inc.</LabelerName>
<SubstanceName>APREPITANT</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 3A4 Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Neurokinin 1 Antagonists [MoA], Substance P/Neurokinin-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250611</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Aprepitant is a substance P/neurokinin 1 (NK1) receptor antagonist. Aprepitant capsules are indicated. in combination with other antiemetic agents, in patients 12 years of age and older for prevention of. o acute and delayed nausea and vomiting associated with initial and repeat courses of highly emetogenic cancer chemotherapy (HEC) including high-dose cisplatin ( 1.1). o nausea and vomiting associated with initial and repeat courses of moderately emetogenic cancer chemotherapy (MEC) ( 1.1). for prevention of postoperative nausea and vomiting (PONV) in adults ( 1.2). Limitations of Use: ( 1.3). Aprepitant has not been studied for treatment of established nausea and vomiting. Chronic continuous administration of aprepitant is not recommended.</IndicationAndUsage>
<Description>Aprepitant capsules, USP contain the active ingredient, aprepitant, USP. Aprepitant, USP is a substance P/neurokinin 1 (NK 1) receptor antagonist, an antiemetic agent, chemically described as 5-[[(2 R,3 S)-2-[(1 R)-1-[3,5bis(trifluoromethyl)phenyl]ethoxy]-3-(4-fluorophenyl)-4-morpholinyl]methyl]-1,2-dihydro-3 H-1,2,4-triazol-3one. Its empirical formula is C 23H 21F 7N 4O 3, and its structural formula is:. Aprepitant, USP is a white to off-white powder, with a molecular weight of 534.43. It is practically insoluble in water. Aprepitant is sparingly soluble in alcohol and slightly soluble in acetonitrile. Each capsule of aprepitant for oral administration contains either 40 mg, 80 mg, or 125 mg of aprepitant, USP and the following inactive ingredients: hypromellose 2910, poloxamer 407, sucrose, microcrystalline cellulose and imprinting ink (shellac glaze, iron oxide black and propylene glycol). The capsule shell excipients are gelatin, titanium dioxide and sodium lauryl sulfate. The 40-mg capsule shell also contains yellow ferric oxide, sodium lauryl sulfate and titanium dioxide, 80-mg capsule shell contains sodium lauryl sulfate and titanium dioxide and the 125-mg capsule contains red ferric oxide, sodium lauryl sulfate and titanium dioxide. Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>59746-701-05</NDCCode>
<PackageDescription>500 CAPSULE in 1 BOTTLE, PLASTIC (59746-701-05) </PackageDescription>
<NDC11Code>59746-0701-05</NDC11Code>
<ProductNDC>59746-701</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxepin Hydrochloride</ProprietaryName>
<NonProprietaryName>Doxepin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215483</ApplicationNumber>
<LabelerName>JUBILANT CADISTA PHARMACEUTICALS INC.</LabelerName>
<SubstanceName>DOXEPIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-07-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Doxepin Hydrochloride Capsules, USP are recommended for the treatment of: 1 Psychoneurotic patients with depression and/or anxiety. , 2 Depression and/or anxiety associated with alcoholism (not to be taken concomitantly with alcohol). , 3 Depression and/or anxiety associated with organic disease (the possibility of drug interaction should be considered if the patient is receiving other drugs concomitantly)., 4 Psychotic depressive disorders with associated anxiety including involutional depression and manic-depressive disorders.</IndicationAndUsage>
<Description>Doxepin hydrochloride is one of a class of psychotherapeutic agents known as dibenzoxepin tricyclic compounds. The molecular formula of the compound is C19H21NOHCl having a molecular weight of 315.84. It is a white crystalline powder freely soluble in water, in alcohol, and methylene chloride. Each 10 mg, 25 mg, 50 mg, 75 mg and 100 mg doxepin hydrochloride capsule for oral administration contains doxepin hydrochloride USP equivalent to 10 mg, 25 mg, 50 mg, 75 mg and 100 mg of doxepin, respectively and the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch and sodium lauryl sulfate. The empty gelatin capsule shells contain gelatin, sodium lauryl sulfate, and titanium dioxide. In addition, the 25 mg and 50 mg empty gelatin capsule shells contain iron oxide yellow, 75 mg, and 100 mg empty gelatin capsule shells contain iron oxide black, iron oxide yellow, and FD&C Blue 1. The imprinting ink contains black iron oxide, potassium hydroxide, propylene glycol and shellac glaze. Doxepin hydrochloride capsules complies with USP Dissolution test 3.</Description>
</NDC>
</NDCList>