{
"NDC": [
{
"NDCCode": "71288-808-76",
"PackageDescription": "10 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (71288-808-76) > 5 mL in 1 VIAL, PHARMACY BULK PACKAGE (71288-808-75) ",
"NDC11Code": "71288-0808-76",
"ProductNDC": "71288-808",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenylephrine Hydrochloride",
"NonProprietaryName": "Phenylephrine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180427",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210333",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2020-12-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180427",
"SamplePackage": "N",
"IndicationAndUsage": "Phenylephrine Hydrochloride Injection is indicated for the treatment of clinically important hypotension resulting primarily from vasodilation in the setting of anesthesia.",
"Description": "Phenylephrine is an alpha-1 adrenergic receptor agonist. Phenylephrine Hydrochloride Injection, USP 10 mg per mL, is a sterile, nonpyrogenic solution for intravenous use. It must be diluted before administration as an intravenous bolus or continuous intravenous infusion. The chemical name of phenylephrine hydrochloride is (-)-m-hydroxy-α- [(methylamino)methyl]benzyl alcohol hydrochloride and is chemically designated as C9H14ClNO2 with a molecular weight of 203.66 g/mol. Its structural formula is depicted below:. Phenylephrine hydrochloride is soluble in water and ethanol, and insoluble in chloroform and ethyl ether. Phenylephrine Hydrochloride Injection, USP, 10 mg per mL, is a clear, colorless solution and is sensitive to light. Each mL contains: phenylephrine hydrochloride 10 mg, sodium chloride 3.5 mg, sodium citrate dihydrate 4 mg, citric acid monohydrate 1 mg, and sodium metabisulfite 2 mg in water for injection. The pH is adjusted with sodium hydroxide and/or hydrochloric acid if necessary. The pH range is 3.5-5.5."
},
{
"NDCCode": "71288-808-77",
"PackageDescription": "1 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (71288-808-77) > 10 mL in 1 VIAL, PHARMACY BULK PACKAGE",
"NDC11Code": "71288-0808-77",
"ProductNDC": "71288-808",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenylephrine Hydrochloride",
"NonProprietaryName": "Phenylephrine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180427",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210333",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2020-12-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180427",
"SamplePackage": "N",
"IndicationAndUsage": "Phenylephrine Hydrochloride Injection is indicated for the treatment of clinically important hypotension resulting primarily from vasodilation in the setting of anesthesia.",
"Description": "Phenylephrine is an alpha-1 adrenergic receptor agonist. Phenylephrine Hydrochloride Injection, USP 10 mg per mL, is a sterile, nonpyrogenic solution for intravenous use. It must be diluted before administration as an intravenous bolus or continuous intravenous infusion. The chemical name of phenylephrine hydrochloride is (-)-m-hydroxy-α- [(methylamino)methyl]benzyl alcohol hydrochloride and is chemically designated as C9H14ClNO2 with a molecular weight of 203.66 g/mol. Its structural formula is depicted below:. Phenylephrine hydrochloride is soluble in water and ethanol, and insoluble in chloroform and ethyl ether. Phenylephrine Hydrochloride Injection, USP, 10 mg per mL, is a clear, colorless solution and is sensitive to light. Each mL contains: phenylephrine hydrochloride 10 mg, sodium chloride 3.5 mg, sodium citrate dihydrate 4 mg, citric acid monohydrate 1 mg, and sodium metabisulfite 2 mg in water for injection. The pH is adjusted with sodium hydroxide and/or hydrochloric acid if necessary. The pH range is 3.5-5.5."
},
{
"NDCCode": "71288-154-76",
"PackageDescription": "1 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (71288-154-76) / 100 mL in 1 VIAL, PHARMACY BULK PACKAGE",
"NDC11Code": "71288-0154-76",
"ProductNDC": "71288-154",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluorouracil",
"NonProprietaryName": "Fluorouracil",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215699",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "FLUOROURACIL",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250206",
"SamplePackage": "N",
"IndicationAndUsage": "Fluorouracil Injection is indicated for the treatment of patients with:.",
"Description": "Fluorouracil Injection, USP, a nucleoside metabolic inhibitor, is a clear and colorless to faint yellow, aqueous, sterile, nonpyrogenic injectable solution available in 100 mL pharmacy bulk package, a sterile preparation that contains doses for multiple patients for intravenous administration. Each mL contains 50 mg fluorouracil, USP in water for injection, USP. The pH is adjusted to approximately 9.2 with sodium hydroxide, NF. Chemically, fluorouracil, a fluorinated pyrimidine, is 5-fluoro-2,4 (1H,3H)-pyrimidinedione. Its structural formula is."
},
{
"NDCCode": "31722-808-02",
"PackageDescription": "200 TABLET in 1 BOTTLE (31722-808-02) ",
"NDC11Code": "31722-0808-02",
"ProductNDC": "31722-808",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Memantine Hydrochloride",
"NonProprietaryName": "Memantine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220926",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204389",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "MEMANTINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "N-methyl-D-aspartate Receptor Antagonist [EPC], NMDA Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2022-10-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220926",
"SamplePackage": "N",
"IndicationAndUsage": "Memantine hydrochloride tablets are indicated for the treatment of moderate to severe dementia of the Alzheimer’s type.",
"Description": "Memantine hydrochloride tablets, USP are an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride is 1-amino-3,5-dimethyladamantane hydrochloride with the following structural formula. The molecular formula is C 12H 21N.HCl and the molecular weight is 215.76. Memantine hydrochloride USP occurs as a white to off-white powder and is freely soluble in methanol, soluble in water and sparingly soluble in dimethylformamide. Memantine hydrochloride tablets USP are available for oral administration as modified capsule shaped, film coated tablets containing 5 mg and 10 mg of memantine hydrochloride USP. The tablets also contain the following inactive ingredients: corn starch, croscarmellose sodium, colloidal silicon dioxide, isopropyl alcohol, lactose monohydrate, magnesium stearate, povidone and talc. The 5 mg tablets are coated with Opadry Orange which contains FD & C blue # 2, FD & C yellow # 6, hypromellose, polyethylene glycol and titanium dioxide, 10 mg tablets are coated with Opadry Grey which contains hypromellose, iron oxide black, polyethylene glycol and titanium dioxide."
},
{
"NDCCode": "31722-808-32",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (31722-808-32) > 10 TABLET in 1 BLISTER PACK",
"NDC11Code": "31722-0808-32",
"ProductNDC": "31722-808",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Memantine Hydrochloride",
"NonProprietaryName": "Memantine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220926",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204389",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "MEMANTINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "N-methyl-D-aspartate Receptor Antagonist [EPC], NMDA Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2022-10-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220926",
"SamplePackage": "N",
"IndicationAndUsage": "Memantine hydrochloride tablets are indicated for the treatment of moderate to severe dementia of the Alzheimer’s type.",
"Description": "Memantine hydrochloride tablets, USP are an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride is 1-amino-3,5-dimethyladamantane hydrochloride with the following structural formula. The molecular formula is C 12H 21N.HCl and the molecular weight is 215.76. Memantine hydrochloride USP occurs as a white to off-white powder and is freely soluble in methanol, soluble in water and sparingly soluble in dimethylformamide. Memantine hydrochloride tablets USP are available for oral administration as modified capsule shaped, film coated tablets containing 5 mg and 10 mg of memantine hydrochloride USP. The tablets also contain the following inactive ingredients: corn starch, croscarmellose sodium, colloidal silicon dioxide, isopropyl alcohol, lactose monohydrate, magnesium stearate, povidone and talc. The 5 mg tablets are coated with Opadry Orange which contains FD & C blue # 2, FD & C yellow # 6, hypromellose, polyethylene glycol and titanium dioxide, 10 mg tablets are coated with Opadry Grey which contains hypromellose, iron oxide black, polyethylene glycol and titanium dioxide."
},
{
"NDCCode": "31722-808-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (31722-808-60) ",
"NDC11Code": "31722-0808-60",
"ProductNDC": "31722-808",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Memantine Hydrochloride",
"NonProprietaryName": "Memantine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220926",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204389",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "MEMANTINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "N-methyl-D-aspartate Receptor Antagonist [EPC], NMDA Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2022-10-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220926",
"SamplePackage": "N",
"IndicationAndUsage": "Memantine hydrochloride tablets are indicated for the treatment of moderate to severe dementia of the Alzheimer’s type.",
"Description": "Memantine hydrochloride tablets, USP are an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride is 1-amino-3,5-dimethyladamantane hydrochloride with the following structural formula. The molecular formula is C 12H 21N.HCl and the molecular weight is 215.76. Memantine hydrochloride USP occurs as a white to off-white powder and is freely soluble in methanol, soluble in water and sparingly soluble in dimethylformamide. Memantine hydrochloride tablets USP are available for oral administration as modified capsule shaped, film coated tablets containing 5 mg and 10 mg of memantine hydrochloride USP. The tablets also contain the following inactive ingredients: corn starch, croscarmellose sodium, colloidal silicon dioxide, isopropyl alcohol, lactose monohydrate, magnesium stearate, povidone and talc. The 5 mg tablets are coated with Opadry Orange which contains FD & C blue # 2, FD & C yellow # 6, hypromellose, polyethylene glycol and titanium dioxide, 10 mg tablets are coated with Opadry Grey which contains hypromellose, iron oxide black, polyethylene glycol and titanium dioxide."
},
{
"NDCCode": "0002-0213-01",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0002-0213-01) / 3 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00002-0213-01",
"ProductNDC": "0002-0213",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Humulin",
"ProprietaryNameSuffix": "R",
"NonProprietaryName": "Insulin Human",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PARENTERAL",
"StartMarketingDate": "19830627",
"EndMarketingDate": "20261215",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA018780",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN HUMAN",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin [CS], Insulin [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20230620",
"EndMarketingDatePackage": "20261215",
"SamplePackage": "N",
"IndicationAndUsage": "HUMULIN R is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin human is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli and has the empirical formula C257H383N65O77S6 with a molecular weight of 5.808 kDa. HUMULIN R (insulin human) injection is a short-acting human insulin for subcutaneous or intravenous use. HUMULIN R is a sterile, aqueous, clear, and colorless solution. HUMULIN R contains 100 units of insulin human in each milliliter. Each milliliter of HUMULIN R also contains glycerin (16 mg), metacresol (2.5 mg), endogenous zinc (approximately 0.015 mg/100 units,) and Water for Injection. Sodium hydroxide and hydrochloric acid may be added during manufacture to adjust the pH. The pH is 7.0 to 7.8."
},
{
"NDCCode": "0002-0800-01",
"PackageDescription": "1 VIAL in 1 CARTON (0002-0800-01) / 10 mL in 1 VIAL",
"NDC11Code": "00002-0800-01",
"ProductNDC": "0002-0800",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sterile Diluent",
"NonProprietaryName": "Diluent",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19870710",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020563",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "WATER",
"StrengthNumber": "1",
"StrengthUnit": "mL/mL",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19870710",
"SamplePackage": "N",
"IndicationAndUsage": "HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "0002-7510-01",
"PackageDescription": "1 VIAL in 1 CARTON (0002-7510-01) / 10 mL in 1 VIAL",
"NDC11Code": "00002-7510-01",
"ProductNDC": "0002-7510",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humalog",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19960614",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020563",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19960724",
"SamplePackage": "N",
"IndicationAndUsage": "HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "0002-7510-17",
"PackageDescription": "1 VIAL in 1 CARTON (0002-7510-17) / 3 mL in 1 VIAL",
"NDC11Code": "00002-7510-17",
"ProductNDC": "0002-7510",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humalog",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19960614",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020563",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2025-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20091204",
"EndMarketingDatePackage": "20250808",
"SamplePackage": "N",
"IndicationAndUsage": "HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "0002-7510-99",
"PackageDescription": "1 VIAL in 1 CARTON (0002-7510-99) / 10 mL in 1 VIAL",
"NDC11Code": "00002-7510-99",
"ProductNDC": "0002-7510",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humalog",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19960614",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020563",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2026-04-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19960724",
"SamplePackage": "Y",
"IndicationAndUsage": "HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "0002-7511-01",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0002-7511-01) / 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00002-7511-01",
"ProductNDC": "0002-7511",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humalog",
"ProprietaryNameSuffix": "Mix75/25",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19991222",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA021017",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20001010",
"SamplePackage": "N",
"IndicationAndUsage": "HUMALOG Mix75/25 is indicated to improve glycemic control in adults with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. HUMALOG Mix75/25 (insulin lispro protamine and insulin lispro) injectable suspension is a mixture of 75% insulin lispro protamine, an intermediate-acting human insulin analog, and 25% insulin lispro, a rapid-acting human insulin analog. Insulin lispro protamine suspension is a suspension of crystals produced from combining insulin lispro and protamine sulfate under appropriate conditions for crystal formation. Insulin lispro has the following primary structure:. HUMALOG Mix75/25 (insulin lispro protamine and insulin lispro) injectable suspension is a white and cloudy, sterile suspension for subcutaneous use. Each mL of HUMALOG Mix75/25 contains 100 units of insulin lispro; dibasic sodium phosphate (2.0 mg), glycerin (16 mg), metacresol (1.76 mg), phenol (0.715 mg), protamine sulfate (0.28 mg), zinc oxide content adjusted to provide zinc ion (0.025 mg), and Water for Injection, USP. The pH is 7.0 to 7.8. Sodium hydroxide and/or hydrochloric acid is added during manufacture to adjust the pH."
},
{
"NDCCode": "0002-7512-01",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0002-7512-01) / 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00002-7512-01",
"ProductNDC": "0002-7512",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humalog",
"ProprietaryNameSuffix": "Mix50/50",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19991222",
"EndMarketingDate": "20240331",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA021018",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2024-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20060207",
"EndMarketingDatePackage": "20240331",
"SamplePackage": "N",
"IndicationAndUsage": "HUMALOG Mix50/50 is indicated to improve glycemic control in adults with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Humalog Mix50/50 (insulin lispro protamine and insulin lispro) injectable suspension is a mixture of 50% insulin lispro protamine, an intermediate-acting human insulin analog, and 50% insulin lispro, a rapid-acting human insulin analog. Insulin lispro protamine suspension is a suspension of crystals produced from combining insulin lispro and protamine sulfate under appropriate conditions for crystal formation. Insulin lispro has the following primary structure:. HUMALOG Mix50/50 (insulin lispro protamine and insulin lispro) injectable suspension is a sterile, white and cloudy suspension for subcutaneous use. Each mL of HUMALOG Mix50/50 contains 100 units of insulin lispro; dibasic sodium phosphate (2.0 mg), glycerin (16 mg), metacresol (2.20 mg), phenol (0.89 mg), protamine sulfate (0.19 mg), zinc oxide content adjusted to provide zinc ion (0.0305 mg), and Water for Injection, USP. The pH is 7.0 to 7.8. Sodium hydroxide and/or hydrochloric acid is added during manufacture to adjust the pH."
},
{
"NDCCode": "0002-7512-99",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0002-7512-99) / 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00002-7512-99",
"ProductNDC": "0002-7512",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humalog",
"ProprietaryNameSuffix": "Mix50/50",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19991222",
"EndMarketingDate": "20240331",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA021018",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2024-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20061019",
"EndMarketingDatePackage": "20240331",
"SamplePackage": "Y",
"IndicationAndUsage": "HUMALOG Mix50/50 is indicated to improve glycemic control in adults with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Humalog Mix50/50 (insulin lispro protamine and insulin lispro) injectable suspension is a mixture of 50% insulin lispro protamine, an intermediate-acting human insulin analog, and 50% insulin lispro, a rapid-acting human insulin analog. Insulin lispro protamine suspension is a suspension of crystals produced from combining insulin lispro and protamine sulfate under appropriate conditions for crystal formation. Insulin lispro has the following primary structure:. HUMALOG Mix50/50 (insulin lispro protamine and insulin lispro) injectable suspension is a sterile, white and cloudy suspension for subcutaneous use. Each mL of HUMALOG Mix50/50 contains 100 units of insulin lispro; dibasic sodium phosphate (2.0 mg), glycerin (16 mg), metacresol (2.20 mg), phenol (0.89 mg), protamine sulfate (0.19 mg), zinc oxide content adjusted to provide zinc ion (0.0305 mg), and Water for Injection, USP. The pH is 7.0 to 7.8. Sodium hydroxide and/or hydrochloric acid is added during manufacture to adjust the pH."
},
{
"NDCCode": "0002-7516-59",
"PackageDescription": "5 CARTRIDGE in 1 CARTON (0002-7516-59) / 3 mL in 1 CARTRIDGE (0002-7516-01) ",
"NDC11Code": "00002-7516-59",
"ProductNDC": "0002-7516",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humalog",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19980220",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020563",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20000726",
"SamplePackage": "N",
"IndicationAndUsage": "HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "0002-7516-99",
"PackageDescription": "5 CARTRIDGE in 1 CARTON (0002-7516-99) / 3 mL in 1 CARTRIDGE",
"NDC11Code": "00002-7516-99",
"ProductNDC": "0002-7516",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humalog",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19980220",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020563",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20000726",
"SamplePackage": "Y",
"IndicationAndUsage": "HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "0002-7533-01",
"PackageDescription": "1 VIAL in 1 CARTON (0002-7533-01) / 3 mL in 1 VIAL",
"NDC11Code": "00002-7533-01",
"ProductNDC": "0002-7533",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humalog",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20230802",
"EndMarketingDate": "20251217",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020563",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2025-12-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20230802",
"EndMarketingDatePackage": "20251217",
"SamplePackage": "N",
"IndicationAndUsage": "HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "0002-7712-27",
"PackageDescription": "2 SYRINGE in 1 CARTON (0002-7712-27) / 3 mL in 1 SYRINGE (0002-7712-01) ",
"NDC11Code": "00002-7712-27",
"ProductNDC": "0002-7712",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humalog",
"ProprietaryNameSuffix": "Kwikpen",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20150526",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA205747",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "200",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150526",
"SamplePackage": "N",
"IndicationAndUsage": "HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "0002-7712-61",
"PackageDescription": "1 SYRINGE in 1 CARTON (0002-7712-61) / 3 mL in 1 SYRINGE",
"NDC11Code": "00002-7712-61",
"ProductNDC": "0002-7712",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humalog",
"ProprietaryNameSuffix": "Kwikpen",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20150526",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA205747",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "200",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20171001",
"SamplePackage": "Y",
"IndicationAndUsage": "HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "0002-7714-59",
"PackageDescription": "5 SYRINGE in 1 CARTON (0002-7714-59) / 3 mL in 1 SYRINGE (0002-7714-01) ",
"NDC11Code": "00002-7714-59",
"ProductNDC": "0002-7714",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humalog",
"ProprietaryNameSuffix": "Junior Kwikpen",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20170606",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020563",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170914",
"SamplePackage": "N",
"IndicationAndUsage": "HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "0002-7714-61",
"PackageDescription": "1 SYRINGE in 1 CARTON (0002-7714-61) / 3 mL in 1 SYRINGE",
"NDC11Code": "00002-7714-61",
"ProductNDC": "0002-7714",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humalog",
"ProprietaryNameSuffix": "Junior Kwikpen",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20170606",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020563",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170925",
"SamplePackage": "Y",
"IndicationAndUsage": "HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "0002-7737-01",
"PackageDescription": "1 VIAL in 1 CARTON (0002-7737-01) / 10 mL in 1 VIAL",
"NDC11Code": "00002-7737-01",
"ProductNDC": "0002-7737",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Insulin Lispro",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20200212",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020563",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2026-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200212",
"SamplePackage": "N",
"IndicationAndUsage": "Insulin Lispro is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. Insulin Lispro injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of Insulin Lispro contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Insulin Lispro has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "0002-7752-05",
"PackageDescription": "5 SYRINGE in 1 CARTON (0002-7752-05) / 3 mL in 1 SYRINGE (0002-7752-01) ",
"NDC11Code": "00002-7752-05",
"ProductNDC": "0002-7752",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Insulin Lispro",
"ProprietaryNameSuffix": "Junior Kwikpen",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20200212",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020563",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2026-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200212",
"SamplePackage": "N",
"IndicationAndUsage": "Insulin Lispro is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. Insulin Lispro injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of Insulin Lispro contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Insulin Lispro has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "0002-8213-05",
"PackageDescription": "5 SYRINGE in 1 CARTON (0002-8213-05) / 3 mL in 1 SYRINGE (0002-8213-01) ",
"NDC11Code": "00002-8213-05",
"ProductNDC": "0002-8213",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humalog",
"ProprietaryNameSuffix": "Tempo Pen",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20170606",
"EndMarketingDate": "20270404",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020563",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20191115",
"EndMarketingDatePackage": "20270404",
"SamplePackage": "N",
"IndicationAndUsage": "HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "0002-8215-01",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0002-8215-01) / 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00002-8215-01",
"ProductNDC": "0002-8215",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Humulin",
"ProprietaryNameSuffix": "R",
"NonProprietaryName": "Insulin Human",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PARENTERAL",
"StartMarketingDate": "19830627",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA018780",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN HUMAN",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin [CS], Insulin [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19830627",
"SamplePackage": "N",
"IndicationAndUsage": "HUMULIN R is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin human is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli and has the empirical formula C257H383N65O77S6 with a molecular weight of 5.808 kDa. HUMULIN R (insulin human) injection is a short-acting human insulin for subcutaneous or intravenous use. HUMULIN R is a sterile, aqueous, clear, and colorless solution. HUMULIN R contains 100 units of insulin human in each milliliter. Each milliliter of HUMULIN R also contains glycerin (16 mg), metacresol (2.5 mg), endogenous zinc (approximately 0.015 mg/100 units,) and Water for Injection. Sodium hydroxide and hydrochloric acid may be added during manufacture to adjust the pH. The pH is 7.0 to 7.8."
},
{
"NDCCode": "0002-8215-17",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0002-8215-17) / 3 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00002-8215-17",
"ProductNDC": "0002-8215",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Humulin",
"ProprietaryNameSuffix": "R",
"NonProprietaryName": "Insulin Human",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PARENTERAL",
"StartMarketingDate": "19830627",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA018780",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN HUMAN",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin [CS], Insulin [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-08-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20091204",
"EndMarketingDatePackage": "20260811",
"SamplePackage": "N",
"IndicationAndUsage": "HUMULIN R is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin human is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli and has the empirical formula C257H383N65O77S6 with a molecular weight of 5.808 kDa. HUMULIN R (insulin human) injection is a short-acting human insulin for subcutaneous or intravenous use. HUMULIN R is a sterile, aqueous, clear, and colorless solution. HUMULIN R contains 100 units of insulin human in each milliliter. Each milliliter of HUMULIN R also contains glycerin (16 mg), metacresol (2.5 mg), endogenous zinc (approximately 0.015 mg/100 units,) and Water for Injection. Sodium hydroxide and hydrochloric acid may be added during manufacture to adjust the pH. The pH is 7.0 to 7.8."
},
{
"NDCCode": "0002-8222-59",
"PackageDescription": "5 SYRINGE in 1 CARTON (0002-8222-59) / 3 mL in 1 SYRINGE (0002-8222-01) ",
"NDC11Code": "00002-8222-59",
"ProductNDC": "0002-8222",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Insulin Lispro",
"ProprietaryNameSuffix": "Kwikpen",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20200212",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020563",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2026-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200212",
"SamplePackage": "N",
"IndicationAndUsage": "Insulin Lispro is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. Insulin Lispro injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of Insulin Lispro contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Insulin Lispro has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "0002-8233-05",
"PackageDescription": "5 SYRINGE in 1 CARTON (0002-8233-05) / 3 mL in 1 SYRINGE (0002-8233-01) ",
"NDC11Code": "00002-8233-05",
"ProductNDC": "0002-8233",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Insulin Lispro Protamine And Insulin Lispro Injectable Suspension",
"ProprietaryNameSuffix": "Mix75/25 Kwikpen",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20200212",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA021017",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2024-08-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200212",
"SamplePackage": "N",
"IndicationAndUsage": "Insulin Lispro Protamine and Insulin Lispro Mix75/25 is indicated to improve glycemic control in adults with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin Lispro Protamine and Insulin Lispro Mix75/25 is a mixture of 75% insulin lispro protamine, an intermediate-acting human insulin analog, and 25% insulin lispro, a rapid-acting human insulin analog. Insulin lispro protamine suspension is a suspension of crystals produced from combining insulin lispro and protamine sulfate under appropriate conditions for crystal formation. Insulin lispro has the following primary structure:. Insulin Lispro Protamine and Insulin Lispro Mix75/25 injectable suspension is a white and cloudy, sterile suspension for subcutaneous use. Each mL of Insulin Lispro Protamine and Insulin Lispro Mix75/25 contains 100 units of insulin lispro; dibasic sodium phosphate (2.0 mg), glycerin (16 mg), metacresol (1.76 mg), phenol (0.715 mg), protamine sulfate (0.28 mg), zinc oxide content adjusted to provide zinc ion (0.025 mg), and Water for Injection, USP. The pH is 7.0 to 7.8. Sodium hydroxide and/or hydrochloric acid is added during manufacture to adjust the pH."
},
{
"NDCCode": "0002-8501-01",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0002-8501-01) / 20 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00002-8501-01",
"ProductNDC": "0002-8501",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Humulin",
"ProprietaryNameSuffix": "R U-500",
"NonProprietaryName": "Insulin Human",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19940331",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA018780",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN HUMAN",
"StrengthNumber": "500",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin [CS], Insulin [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19970106",
"SamplePackage": "N",
"IndicationAndUsage": "HUMULIN R U-500 is a concentrated human insulin indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus requiring more than 200 units of insulin per day.",
"Description": "Insulin human is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli and has the empirical formula C257H383N65O77S6 with a molecular weight of 5.808 kDa. HUMULIN R U-500 (insulin human) injection is a sterile, aqueous, and colorless solution for subcutaneous use. HUMULIN R U-500 contains 500 units of insulin human in each milliliter. Each milliliter of HUMULIN R U-500 also contains glycerin (16 mg), metacresol (2.5 mg), zinc oxide to supplement the endogenous zinc to obtain a total zinc content of 0.017 mg/100 units, and Water for Injection. Sodium hydroxide and hydrochloric acid may be added during manufacture to adjust the pH. The pH is 7.0 to 7.8."
},
{
"NDCCode": "0002-8715-01",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0002-8715-01) / 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00002-8715-01",
"ProductNDC": "0002-8715",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Humulin",
"ProprietaryNameSuffix": "70/30",
"NonProprietaryName": "Insulin Human",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19890626",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA019717",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN HUMAN",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin [CS], Insulin [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19890626",
"SamplePackage": "N",
"IndicationAndUsage": "HUMULIN 70/30 is a fixed ratio insulin formulation indicated to improve glycemic control in adults with diabetes mellitus.",
"Description": "Insulin human is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. The amino acid sequence of insulin human is identical to human insulin and has the empirical formula C257H383N65O77S6 with a molecular weight of 5.808 kDa. HUMULIN 70/30 (insulin isophane human and insulin human) injectable suspension is a mixture of 70% insulin isophane human suspension, an intermediate-acting insulin, and 30% insulin human injection, a short-acting insulin. HUMULIN 70/30 is a suspension of crystals produced from combining insulin human and protamine sulfate under appropriate conditions for crystal formation and mixing with insulin human injection. HUMULIN 70/30 is a sterile, white and cloudy suspension that contains insulin isophane human suspension (NPH) and insulin human injection (regular) for subcutaneous use. Each milliliter of HUMULIN 70/30 contains 100 units of insulin human, dibasic sodium phosphate (3.78 mg), glycerin (16 mg), metacresol (1.6 mg), phenol (0.65 mg), protamine sulfate (0.24 mg), zinc oxide content adjusted to provide 0.025 mg zinc ion, and Water for Injection. The pH is 7.0 to 7.8. Sodium hydroxide and/or hydrochloric acid may be added during manufacture to adjust the pH."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>71288-808-76</NDCCode>
<PackageDescription>10 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (71288-808-76) > 5 mL in 1 VIAL, PHARMACY BULK PACKAGE (71288-808-75) </PackageDescription>
<NDC11Code>71288-0808-76</NDC11Code>
<ProductNDC>71288-808</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenylephrine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenylephrine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180427</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210333</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-12-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180427</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phenylephrine Hydrochloride Injection is indicated for the treatment of clinically important hypotension resulting primarily from vasodilation in the setting of anesthesia.</IndicationAndUsage>
<Description>Phenylephrine is an alpha-1 adrenergic receptor agonist. Phenylephrine Hydrochloride Injection, USP 10 mg per mL, is a sterile, nonpyrogenic solution for intravenous use. It must be diluted before administration as an intravenous bolus or continuous intravenous infusion. The chemical name of phenylephrine hydrochloride is (-)-m-hydroxy-α- [(methylamino)methyl]benzyl alcohol hydrochloride and is chemically designated as C9H14ClNO2 with a molecular weight of 203.66 g/mol. Its structural formula is depicted below:. Phenylephrine hydrochloride is soluble in water and ethanol, and insoluble in chloroform and ethyl ether. Phenylephrine Hydrochloride Injection, USP, 10 mg per mL, is a clear, colorless solution and is sensitive to light. Each mL contains: phenylephrine hydrochloride 10 mg, sodium chloride 3.5 mg, sodium citrate dihydrate 4 mg, citric acid monohydrate 1 mg, and sodium metabisulfite 2 mg in water for injection. The pH is adjusted with sodium hydroxide and/or hydrochloric acid if necessary. The pH range is 3.5-5.5.</Description>
</NDC>
<NDC>
<NDCCode>71288-808-77</NDCCode>
<PackageDescription>1 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (71288-808-77) > 10 mL in 1 VIAL, PHARMACY BULK PACKAGE</PackageDescription>
<NDC11Code>71288-0808-77</NDC11Code>
<ProductNDC>71288-808</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenylephrine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenylephrine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180427</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210333</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-12-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180427</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phenylephrine Hydrochloride Injection is indicated for the treatment of clinically important hypotension resulting primarily from vasodilation in the setting of anesthesia.</IndicationAndUsage>
<Description>Phenylephrine is an alpha-1 adrenergic receptor agonist. Phenylephrine Hydrochloride Injection, USP 10 mg per mL, is a sterile, nonpyrogenic solution for intravenous use. It must be diluted before administration as an intravenous bolus or continuous intravenous infusion. The chemical name of phenylephrine hydrochloride is (-)-m-hydroxy-α- [(methylamino)methyl]benzyl alcohol hydrochloride and is chemically designated as C9H14ClNO2 with a molecular weight of 203.66 g/mol. Its structural formula is depicted below:. Phenylephrine hydrochloride is soluble in water and ethanol, and insoluble in chloroform and ethyl ether. Phenylephrine Hydrochloride Injection, USP, 10 mg per mL, is a clear, colorless solution and is sensitive to light. Each mL contains: phenylephrine hydrochloride 10 mg, sodium chloride 3.5 mg, sodium citrate dihydrate 4 mg, citric acid monohydrate 1 mg, and sodium metabisulfite 2 mg in water for injection. The pH is adjusted with sodium hydroxide and/or hydrochloric acid if necessary. The pH range is 3.5-5.5.</Description>
</NDC>
<NDC>
<NDCCode>71288-154-76</NDCCode>
<PackageDescription>1 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (71288-154-76) / 100 mL in 1 VIAL, PHARMACY BULK PACKAGE</PackageDescription>
<NDC11Code>71288-0154-76</NDC11Code>
<ProductNDC>71288-154</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluorouracil</ProprietaryName>
<NonProprietaryName>Fluorouracil</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215699</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>FLUOROURACIL</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluorouracil Injection is indicated for the treatment of patients with:.</IndicationAndUsage>
<Description>Fluorouracil Injection, USP, a nucleoside metabolic inhibitor, is a clear and colorless to faint yellow, aqueous, sterile, nonpyrogenic injectable solution available in 100 mL pharmacy bulk package, a sterile preparation that contains doses for multiple patients for intravenous administration. Each mL contains 50 mg fluorouracil, USP in water for injection, USP. The pH is adjusted to approximately 9.2 with sodium hydroxide, NF. Chemically, fluorouracil, a fluorinated pyrimidine, is 5-fluoro-2,4 (1H,3H)-pyrimidinedione. Its structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>31722-808-02</NDCCode>
<PackageDescription>200 TABLET in 1 BOTTLE (31722-808-02) </PackageDescription>
<NDC11Code>31722-0808-02</NDC11Code>
<ProductNDC>31722-808</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Memantine Hydrochloride</ProprietaryName>
<NonProprietaryName>Memantine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220926</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204389</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>MEMANTINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>N-methyl-D-aspartate Receptor Antagonist [EPC], NMDA Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-10-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220926</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Memantine hydrochloride tablets are indicated for the treatment of moderate to severe dementia of the Alzheimer’s type.</IndicationAndUsage>
<Description>Memantine hydrochloride tablets, USP are an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride is 1-amino-3,5-dimethyladamantane hydrochloride with the following structural formula. The molecular formula is C 12H 21N.HCl and the molecular weight is 215.76. Memantine hydrochloride USP occurs as a white to off-white powder and is freely soluble in methanol, soluble in water and sparingly soluble in dimethylformamide. Memantine hydrochloride tablets USP are available for oral administration as modified capsule shaped, film coated tablets containing 5 mg and 10 mg of memantine hydrochloride USP. The tablets also contain the following inactive ingredients: corn starch, croscarmellose sodium, colloidal silicon dioxide, isopropyl alcohol, lactose monohydrate, magnesium stearate, povidone and talc. The 5 mg tablets are coated with Opadry Orange which contains FD & C blue # 2, FD & C yellow # 6, hypromellose, polyethylene glycol and titanium dioxide, 10 mg tablets are coated with Opadry Grey which contains hypromellose, iron oxide black, polyethylene glycol and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>31722-808-32</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (31722-808-32) > 10 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>31722-0808-32</NDC11Code>
<ProductNDC>31722-808</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Memantine Hydrochloride</ProprietaryName>
<NonProprietaryName>Memantine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220926</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204389</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>MEMANTINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>N-methyl-D-aspartate Receptor Antagonist [EPC], NMDA Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-10-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220926</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Memantine hydrochloride tablets are indicated for the treatment of moderate to severe dementia of the Alzheimer’s type.</IndicationAndUsage>
<Description>Memantine hydrochloride tablets, USP are an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride is 1-amino-3,5-dimethyladamantane hydrochloride with the following structural formula. The molecular formula is C 12H 21N.HCl and the molecular weight is 215.76. Memantine hydrochloride USP occurs as a white to off-white powder and is freely soluble in methanol, soluble in water and sparingly soluble in dimethylformamide. Memantine hydrochloride tablets USP are available for oral administration as modified capsule shaped, film coated tablets containing 5 mg and 10 mg of memantine hydrochloride USP. The tablets also contain the following inactive ingredients: corn starch, croscarmellose sodium, colloidal silicon dioxide, isopropyl alcohol, lactose monohydrate, magnesium stearate, povidone and talc. The 5 mg tablets are coated with Opadry Orange which contains FD & C blue # 2, FD & C yellow # 6, hypromellose, polyethylene glycol and titanium dioxide, 10 mg tablets are coated with Opadry Grey which contains hypromellose, iron oxide black, polyethylene glycol and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>31722-808-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (31722-808-60) </PackageDescription>
<NDC11Code>31722-0808-60</NDC11Code>
<ProductNDC>31722-808</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Memantine Hydrochloride</ProprietaryName>
<NonProprietaryName>Memantine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220926</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204389</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>MEMANTINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>N-methyl-D-aspartate Receptor Antagonist [EPC], NMDA Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-10-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220926</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Memantine hydrochloride tablets are indicated for the treatment of moderate to severe dementia of the Alzheimer’s type.</IndicationAndUsage>
<Description>Memantine hydrochloride tablets, USP are an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride is 1-amino-3,5-dimethyladamantane hydrochloride with the following structural formula. The molecular formula is C 12H 21N.HCl and the molecular weight is 215.76. Memantine hydrochloride USP occurs as a white to off-white powder and is freely soluble in methanol, soluble in water and sparingly soluble in dimethylformamide. Memantine hydrochloride tablets USP are available for oral administration as modified capsule shaped, film coated tablets containing 5 mg and 10 mg of memantine hydrochloride USP. The tablets also contain the following inactive ingredients: corn starch, croscarmellose sodium, colloidal silicon dioxide, isopropyl alcohol, lactose monohydrate, magnesium stearate, povidone and talc. The 5 mg tablets are coated with Opadry Orange which contains FD & C blue # 2, FD & C yellow # 6, hypromellose, polyethylene glycol and titanium dioxide, 10 mg tablets are coated with Opadry Grey which contains hypromellose, iron oxide black, polyethylene glycol and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0002-0213-01</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0002-0213-01) / 3 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00002-0213-01</NDC11Code>
<ProductNDC>0002-0213</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Humulin</ProprietaryName>
<ProprietaryNameSuffix>R</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Human</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PARENTERAL</RouteName>
<StartMarketingDate>19830627</StartMarketingDate>
<EndMarketingDate>20261215</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA018780</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN HUMAN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin [CS], Insulin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20230620</StartMarketingDatePackage>
<EndMarketingDatePackage>20261215</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMULIN R is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin human is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli and has the empirical formula C257H383N65O77S6 with a molecular weight of 5.808 kDa. HUMULIN R (insulin human) injection is a short-acting human insulin for subcutaneous or intravenous use. HUMULIN R is a sterile, aqueous, clear, and colorless solution. HUMULIN R contains 100 units of insulin human in each milliliter. Each milliliter of HUMULIN R also contains glycerin (16 mg), metacresol (2.5 mg), endogenous zinc (approximately 0.015 mg/100 units,) and Water for Injection. Sodium hydroxide and hydrochloric acid may be added during manufacture to adjust the pH. The pH is 7.0 to 7.8.</Description>
</NDC>
<NDC>
<NDCCode>0002-0800-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (0002-0800-01) / 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>00002-0800-01</NDC11Code>
<ProductNDC>0002-0800</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sterile Diluent</ProprietaryName>
<NonProprietaryName>Diluent</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19870710</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020563</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>WATER</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mL/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19870710</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-7510-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (0002-7510-01) / 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>00002-7510-01</NDC11Code>
<ProductNDC>0002-7510</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humalog</ProprietaryName>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19960614</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020563</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19960724</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-7510-17</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (0002-7510-17) / 3 mL in 1 VIAL</PackageDescription>
<NDC11Code>00002-7510-17</NDC11Code>
<ProductNDC>0002-7510</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humalog</ProprietaryName>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19960614</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020563</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20091204</StartMarketingDatePackage>
<EndMarketingDatePackage>20250808</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-7510-99</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (0002-7510-99) / 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>00002-7510-99</NDC11Code>
<ProductNDC>0002-7510</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humalog</ProprietaryName>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19960614</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020563</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19960724</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-7511-01</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0002-7511-01) / 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00002-7511-01</NDC11Code>
<ProductNDC>0002-7511</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humalog</ProprietaryName>
<ProprietaryNameSuffix>Mix75/25</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19991222</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA021017</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20001010</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMALOG Mix75/25 is indicated to improve glycemic control in adults with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. HUMALOG Mix75/25 (insulin lispro protamine and insulin lispro) injectable suspension is a mixture of 75% insulin lispro protamine, an intermediate-acting human insulin analog, and 25% insulin lispro, a rapid-acting human insulin analog. Insulin lispro protamine suspension is a suspension of crystals produced from combining insulin lispro and protamine sulfate under appropriate conditions for crystal formation. Insulin lispro has the following primary structure:. HUMALOG Mix75/25 (insulin lispro protamine and insulin lispro) injectable suspension is a white and cloudy, sterile suspension for subcutaneous use. Each mL of HUMALOG Mix75/25 contains 100 units of insulin lispro; dibasic sodium phosphate (2.0 mg), glycerin (16 mg), metacresol (1.76 mg), phenol (0.715 mg), protamine sulfate (0.28 mg), zinc oxide content adjusted to provide zinc ion (0.025 mg), and Water for Injection, USP. The pH is 7.0 to 7.8. Sodium hydroxide and/or hydrochloric acid is added during manufacture to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-7512-01</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0002-7512-01) / 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00002-7512-01</NDC11Code>
<ProductNDC>0002-7512</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humalog</ProprietaryName>
<ProprietaryNameSuffix>Mix50/50</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19991222</StartMarketingDate>
<EndMarketingDate>20240331</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA021018</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20060207</StartMarketingDatePackage>
<EndMarketingDatePackage>20240331</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMALOG Mix50/50 is indicated to improve glycemic control in adults with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Humalog Mix50/50 (insulin lispro protamine and insulin lispro) injectable suspension is a mixture of 50% insulin lispro protamine, an intermediate-acting human insulin analog, and 50% insulin lispro, a rapid-acting human insulin analog. Insulin lispro protamine suspension is a suspension of crystals produced from combining insulin lispro and protamine sulfate under appropriate conditions for crystal formation. Insulin lispro has the following primary structure:. HUMALOG Mix50/50 (insulin lispro protamine and insulin lispro) injectable suspension is a sterile, white and cloudy suspension for subcutaneous use. Each mL of HUMALOG Mix50/50 contains 100 units of insulin lispro; dibasic sodium phosphate (2.0 mg), glycerin (16 mg), metacresol (2.20 mg), phenol (0.89 mg), protamine sulfate (0.19 mg), zinc oxide content adjusted to provide zinc ion (0.0305 mg), and Water for Injection, USP. The pH is 7.0 to 7.8. Sodium hydroxide and/or hydrochloric acid is added during manufacture to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-7512-99</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0002-7512-99) / 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00002-7512-99</NDC11Code>
<ProductNDC>0002-7512</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humalog</ProprietaryName>
<ProprietaryNameSuffix>Mix50/50</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19991222</StartMarketingDate>
<EndMarketingDate>20240331</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA021018</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20061019</StartMarketingDatePackage>
<EndMarketingDatePackage>20240331</EndMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>HUMALOG Mix50/50 is indicated to improve glycemic control in adults with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Humalog Mix50/50 (insulin lispro protamine and insulin lispro) injectable suspension is a mixture of 50% insulin lispro protamine, an intermediate-acting human insulin analog, and 50% insulin lispro, a rapid-acting human insulin analog. Insulin lispro protamine suspension is a suspension of crystals produced from combining insulin lispro and protamine sulfate under appropriate conditions for crystal formation. Insulin lispro has the following primary structure:. HUMALOG Mix50/50 (insulin lispro protamine and insulin lispro) injectable suspension is a sterile, white and cloudy suspension for subcutaneous use. Each mL of HUMALOG Mix50/50 contains 100 units of insulin lispro; dibasic sodium phosphate (2.0 mg), glycerin (16 mg), metacresol (2.20 mg), phenol (0.89 mg), protamine sulfate (0.19 mg), zinc oxide content adjusted to provide zinc ion (0.0305 mg), and Water for Injection, USP. The pH is 7.0 to 7.8. Sodium hydroxide and/or hydrochloric acid is added during manufacture to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-7516-59</NDCCode>
<PackageDescription>5 CARTRIDGE in 1 CARTON (0002-7516-59) / 3 mL in 1 CARTRIDGE (0002-7516-01) </PackageDescription>
<NDC11Code>00002-7516-59</NDC11Code>
<ProductNDC>0002-7516</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humalog</ProprietaryName>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980220</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020563</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20000726</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-7516-99</NDCCode>
<PackageDescription>5 CARTRIDGE in 1 CARTON (0002-7516-99) / 3 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>00002-7516-99</NDC11Code>
<ProductNDC>0002-7516</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humalog</ProprietaryName>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980220</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020563</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20000726</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-7533-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (0002-7533-01) / 3 mL in 1 VIAL</PackageDescription>
<NDC11Code>00002-7533-01</NDC11Code>
<ProductNDC>0002-7533</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humalog</ProprietaryName>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20230802</StartMarketingDate>
<EndMarketingDate>20251217</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020563</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20230802</StartMarketingDatePackage>
<EndMarketingDatePackage>20251217</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-7712-27</NDCCode>
<PackageDescription>2 SYRINGE in 1 CARTON (0002-7712-27) / 3 mL in 1 SYRINGE (0002-7712-01) </PackageDescription>
<NDC11Code>00002-7712-27</NDC11Code>
<ProductNDC>0002-7712</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humalog</ProprietaryName>
<ProprietaryNameSuffix>Kwikpen</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20150526</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA205747</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150526</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-7712-61</NDCCode>
<PackageDescription>1 SYRINGE in 1 CARTON (0002-7712-61) / 3 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00002-7712-61</NDC11Code>
<ProductNDC>0002-7712</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humalog</ProprietaryName>
<ProprietaryNameSuffix>Kwikpen</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20150526</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA205747</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171001</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-7714-59</NDCCode>
<PackageDescription>5 SYRINGE in 1 CARTON (0002-7714-59) / 3 mL in 1 SYRINGE (0002-7714-01) </PackageDescription>
<NDC11Code>00002-7714-59</NDC11Code>
<ProductNDC>0002-7714</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humalog</ProprietaryName>
<ProprietaryNameSuffix>Junior Kwikpen</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20170606</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020563</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170914</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-7714-61</NDCCode>
<PackageDescription>1 SYRINGE in 1 CARTON (0002-7714-61) / 3 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00002-7714-61</NDC11Code>
<ProductNDC>0002-7714</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humalog</ProprietaryName>
<ProprietaryNameSuffix>Junior Kwikpen</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20170606</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020563</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170925</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-7737-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (0002-7737-01) / 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>00002-7737-01</NDC11Code>
<ProductNDC>0002-7737</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Insulin Lispro</ProprietaryName>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20200212</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020563</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Insulin Lispro is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. Insulin Lispro injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of Insulin Lispro contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Insulin Lispro has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-7752-05</NDCCode>
<PackageDescription>5 SYRINGE in 1 CARTON (0002-7752-05) / 3 mL in 1 SYRINGE (0002-7752-01) </PackageDescription>
<NDC11Code>00002-7752-05</NDC11Code>
<ProductNDC>0002-7752</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Insulin Lispro</ProprietaryName>
<ProprietaryNameSuffix>Junior Kwikpen</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20200212</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020563</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Insulin Lispro is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. Insulin Lispro injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of Insulin Lispro contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Insulin Lispro has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-8213-05</NDCCode>
<PackageDescription>5 SYRINGE in 1 CARTON (0002-8213-05) / 3 mL in 1 SYRINGE (0002-8213-01) </PackageDescription>
<NDC11Code>00002-8213-05</NDC11Code>
<ProductNDC>0002-8213</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humalog</ProprietaryName>
<ProprietaryNameSuffix>Tempo Pen</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20170606</StartMarketingDate>
<EndMarketingDate>20270404</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020563</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20191115</StartMarketingDatePackage>
<EndMarketingDatePackage>20270404</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-8215-01</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0002-8215-01) / 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00002-8215-01</NDC11Code>
<ProductNDC>0002-8215</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Humulin</ProprietaryName>
<ProprietaryNameSuffix>R</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Human</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PARENTERAL</RouteName>
<StartMarketingDate>19830627</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA018780</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN HUMAN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin [CS], Insulin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19830627</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMULIN R is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin human is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli and has the empirical formula C257H383N65O77S6 with a molecular weight of 5.808 kDa. HUMULIN R (insulin human) injection is a short-acting human insulin for subcutaneous or intravenous use. HUMULIN R is a sterile, aqueous, clear, and colorless solution. HUMULIN R contains 100 units of insulin human in each milliliter. Each milliliter of HUMULIN R also contains glycerin (16 mg), metacresol (2.5 mg), endogenous zinc (approximately 0.015 mg/100 units,) and Water for Injection. Sodium hydroxide and hydrochloric acid may be added during manufacture to adjust the pH. The pH is 7.0 to 7.8.</Description>
</NDC>
<NDC>
<NDCCode>0002-8215-17</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0002-8215-17) / 3 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00002-8215-17</NDC11Code>
<ProductNDC>0002-8215</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Humulin</ProprietaryName>
<ProprietaryNameSuffix>R</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Human</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PARENTERAL</RouteName>
<StartMarketingDate>19830627</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA018780</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN HUMAN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin [CS], Insulin [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20091204</StartMarketingDatePackage>
<EndMarketingDatePackage>20260811</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMULIN R is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin human is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli and has the empirical formula C257H383N65O77S6 with a molecular weight of 5.808 kDa. HUMULIN R (insulin human) injection is a short-acting human insulin for subcutaneous or intravenous use. HUMULIN R is a sterile, aqueous, clear, and colorless solution. HUMULIN R contains 100 units of insulin human in each milliliter. Each milliliter of HUMULIN R also contains glycerin (16 mg), metacresol (2.5 mg), endogenous zinc (approximately 0.015 mg/100 units,) and Water for Injection. Sodium hydroxide and hydrochloric acid may be added during manufacture to adjust the pH. The pH is 7.0 to 7.8.</Description>
</NDC>
<NDC>
<NDCCode>0002-8222-59</NDCCode>
<PackageDescription>5 SYRINGE in 1 CARTON (0002-8222-59) / 3 mL in 1 SYRINGE (0002-8222-01) </PackageDescription>
<NDC11Code>00002-8222-59</NDC11Code>
<ProductNDC>0002-8222</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Insulin Lispro</ProprietaryName>
<ProprietaryNameSuffix>Kwikpen</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20200212</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020563</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Insulin Lispro is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. Insulin Lispro injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of Insulin Lispro contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Insulin Lispro has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-8233-05</NDCCode>
<PackageDescription>5 SYRINGE in 1 CARTON (0002-8233-05) / 3 mL in 1 SYRINGE (0002-8233-01) </PackageDescription>
<NDC11Code>00002-8233-05</NDC11Code>
<ProductNDC>0002-8233</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Insulin Lispro Protamine And Insulin Lispro Injectable Suspension</ProprietaryName>
<ProprietaryNameSuffix>Mix75/25 Kwikpen</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20200212</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA021017</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Insulin Lispro Protamine and Insulin Lispro Mix75/25 is indicated to improve glycemic control in adults with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin Lispro Protamine and Insulin Lispro Mix75/25 is a mixture of 75% insulin lispro protamine, an intermediate-acting human insulin analog, and 25% insulin lispro, a rapid-acting human insulin analog. Insulin lispro protamine suspension is a suspension of crystals produced from combining insulin lispro and protamine sulfate under appropriate conditions for crystal formation. Insulin lispro has the following primary structure:. Insulin Lispro Protamine and Insulin Lispro Mix75/25 injectable suspension is a white and cloudy, sterile suspension for subcutaneous use. Each mL of Insulin Lispro Protamine and Insulin Lispro Mix75/25 contains 100 units of insulin lispro; dibasic sodium phosphate (2.0 mg), glycerin (16 mg), metacresol (1.76 mg), phenol (0.715 mg), protamine sulfate (0.28 mg), zinc oxide content adjusted to provide zinc ion (0.025 mg), and Water for Injection, USP. The pH is 7.0 to 7.8. Sodium hydroxide and/or hydrochloric acid is added during manufacture to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-8501-01</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0002-8501-01) / 20 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00002-8501-01</NDC11Code>
<ProductNDC>0002-8501</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Humulin</ProprietaryName>
<ProprietaryNameSuffix>R U-500</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Human</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19940331</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA018780</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN HUMAN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin [CS], Insulin [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19970106</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMULIN R U-500 is a concentrated human insulin indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus requiring more than 200 units of insulin per day.</IndicationAndUsage>
<Description>Insulin human is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli and has the empirical formula C257H383N65O77S6 with a molecular weight of 5.808 kDa. HUMULIN R U-500 (insulin human) injection is a sterile, aqueous, and colorless solution for subcutaneous use. HUMULIN R U-500 contains 500 units of insulin human in each milliliter. Each milliliter of HUMULIN R U-500 also contains glycerin (16 mg), metacresol (2.5 mg), zinc oxide to supplement the endogenous zinc to obtain a total zinc content of 0.017 mg/100 units, and Water for Injection. Sodium hydroxide and hydrochloric acid may be added during manufacture to adjust the pH. The pH is 7.0 to 7.8.</Description>
</NDC>
<NDC>
<NDCCode>0002-8715-01</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0002-8715-01) / 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00002-8715-01</NDC11Code>
<ProductNDC>0002-8715</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Humulin</ProprietaryName>
<ProprietaryNameSuffix>70/30</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Human</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19890626</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA019717</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN HUMAN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin [CS], Insulin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19890626</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMULIN 70/30 is a fixed ratio insulin formulation indicated to improve glycemic control in adults with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin human is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. The amino acid sequence of insulin human is identical to human insulin and has the empirical formula C257H383N65O77S6 with a molecular weight of 5.808 kDa. HUMULIN 70/30 (insulin isophane human and insulin human) injectable suspension is a mixture of 70% insulin isophane human suspension, an intermediate-acting insulin, and 30% insulin human injection, a short-acting insulin. HUMULIN 70/30 is a suspension of crystals produced from combining insulin human and protamine sulfate under appropriate conditions for crystal formation and mixing with insulin human injection. HUMULIN 70/30 is a sterile, white and cloudy suspension that contains insulin isophane human suspension (NPH) and insulin human injection (regular) for subcutaneous use. Each milliliter of HUMULIN 70/30 contains 100 units of insulin human, dibasic sodium phosphate (3.78 mg), glycerin (16 mg), metacresol (1.6 mg), phenol (0.65 mg), protamine sulfate (0.24 mg), zinc oxide content adjusted to provide 0.025 mg zinc ion, and Water for Injection. The pH is 7.0 to 7.8. Sodium hydroxide and/or hydrochloric acid may be added during manufacture to adjust the pH.</Description>
</NDC>
</NDCList>