{
"NDC": [
{
"NDCCode": "71329-303-01",
"PackageDescription": "8 mL in 1 VIAL (71329-303-01) ",
"NDC11Code": "71329-0303-01",
"ProductNDC": "71329-303",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methylprednisolone Sodium Succinate",
"NonProprietaryName": "Methylprednisolone",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20210420",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212396",
"LabelerName": "GeneYork Pharmaceuticals Group LLC",
"SubstanceName": "METHYLPREDNISOLONE SODIUM SUCCINATE",
"StrengthNumber": "500",
"StrengthUnit": "mg/8mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20210420",
"SamplePackage": "N",
"IndicationAndUsage": "When oral therapy is not feasible, and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, the intravenous or intramuscular use of methylprednisolone sodium succinate for injection, USP is indicated as follows. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, perennial or seasonal allergic rhinitis, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond-Blackfan anemia), idiopathic thrombocytopenic purpura in adults (intravenous administration only; intramuscular administration is contraindicated), pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous System: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor, or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, temporal arteritis, polymyositis, and systemic lupus erythematosus.",
"Description": "Methylprednisolone sodium succinate for injection, USP is an anti-inflammatory glucocorticoid, which contains methylprednisolone sodium succinate as the active ingredient. Methylprednisolone sodium succinate, USP, is the sodium succinate ester of methylprednisolone, and it occurs as a white, or nearly white, odorless hygroscopic, amorphous solid. It is very soluble in water and in alcohol; it is insoluble in chloroform and is very slightly soluble in acetone.The chemical name for methylprednisolone sodium succinate is pregna-1,4-diene-3,20-dione, 21-(3-carboxy-1-oxopropoxy)-11, 17-dihydroxy-6-methyl-monosodium salt, (6α, 11β), and the molecular weight is 496.53. The structural formula is represented below. Methylprednisolone sodium succinate is soluble in water; it may be administered in a small volume of diluent and is well suited for intravenous use in situations where high blood levels of methylprednisolone are required rapidly. Methylprednisolone sodium succinate for injection, USP is available in following strengths for intravenous or intramuscular administration. 40 mg (Single- Dose Vial) Each mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 40 mg methylprednisolone, also 1.6 mg monobasic sodium phosphate anhydrous; 17.46 mg dibasic sodium phosphate dried; and 25mg lactose hydrous. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative. 125 mg (Single- Dose Vial) Each 2 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 125 mg methylprednisolone; also 1.6 mg monobasic sodium phosphate anhydrous; and 17.4 mg dibasic sodium phosphate dried. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative. 500mg (Multi-Dose) Each 8 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 500 mg methylprednisolone; also 6.4 mg monobasic sodium phosphate anhydrous; 69.6 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. 1 gram (Multi-Dose) Each 16 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 1 gram methylprednisolone; also 12.8 mg monobasic sodium phosphate anhydrous; 139.2 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. 2 gram (Single- Dose Vial) Each 30.6 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 2 grams methylprednisolone; also 25.6 mg monobasic sodium phosphate anhydrous; 278 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. IMPORTANT – Use only Water for Injection or Bacteriostatic Water for Injection with Benzyl Alcohol when reconstituting methylprednisolone sodium succinate for injection, USP. Use within 48 hours after mixing. When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8 and the tonicities are, for the 40 mg per mL solution, 0.50 osmolar; for the 125 mg per 2 mL solution, 0.40 osmolar; for the 1gram per 8 mL solution, 0.44 osmolar; for the 2 gram per 30.6 mL solutions, 0.42 osmolar. (Isotonic saline=0.28 osmolar.)."
},
{
"NDCCode": "71329-103-01",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (71329-103-01) > 500 TABLET in 1 BOTTLE, PLASTIC",
"NDC11Code": "71329-0103-01",
"ProductNDC": "71329-103",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisone",
"NonProprietaryName": "Prednisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20181204",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210525",
"LabelerName": "GeneYork Pharmaceuticals Group LLC",
"SubstanceName": "PREDNISONE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20181204",
"SamplePackage": "N"
},
{
"NDCCode": "71329-104-01",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (71329-104-01) > 500 TABLET in 1 BOTTLE, PLASTIC",
"NDC11Code": "71329-0104-01",
"ProductNDC": "71329-104",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisone",
"NonProprietaryName": "Prednisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20181204",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210525",
"LabelerName": "GeneYork Pharmaceuticals Group LLC",
"SubstanceName": "PREDNISONE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20181204",
"SamplePackage": "N"
},
{
"NDCCode": "71329-105-01",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (71329-105-01) > 100 TABLET in 1 BOTTLE, PLASTIC",
"NDC11Code": "71329-0105-01",
"ProductNDC": "71329-105",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisone",
"NonProprietaryName": "Prednisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20181204",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210525",
"LabelerName": "GeneYork Pharmaceuticals Group LLC",
"SubstanceName": "PREDNISONE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20181204",
"SamplePackage": "N"
},
{
"NDCCode": "71329-106-01",
"PackageDescription": "1 BOTTLE in 1 CARTON (71329-106-01) > 1000 TABLET in 1 BOTTLE",
"NDC11Code": "71329-0106-01",
"ProductNDC": "71329-106",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisone",
"NonProprietaryName": "Prednisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190104",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211496",
"LabelerName": "GeneYork Pharmaceuticals Group LLC",
"SubstanceName": "PREDNISONE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20190104",
"SamplePackage": "N"
},
{
"NDCCode": "71329-107-01",
"PackageDescription": "1 BOTTLE in 1 CARTON (71329-107-01) > 100 TABLET in 1 BOTTLE",
"NDC11Code": "71329-0107-01",
"ProductNDC": "71329-107",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisone",
"NonProprietaryName": "Prednisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20181211",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211495",
"LabelerName": "GeneYork Pharmaceuticals Group LLC",
"SubstanceName": "PREDNISONE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20181211",
"SamplePackage": "N"
},
{
"NDCCode": "71329-108-01",
"PackageDescription": "1 BOTTLE in 1 CARTON (71329-108-01) > 1000 TABLET in 1 BOTTLE",
"NDC11Code": "71329-0108-01",
"ProductNDC": "71329-108",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisone",
"NonProprietaryName": "Prednisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20181211",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211495",
"LabelerName": "GeneYork Pharmaceuticals Group LLC",
"SubstanceName": "PREDNISONE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20181211",
"SamplePackage": "N"
},
{
"NDCCode": "71329-301-25",
"PackageDescription": "25 VIAL in 1 CARTON (71329-301-25) > 1 mL in 1 VIAL (71329-301-01) ",
"NDC11Code": "71329-0301-25",
"ProductNDC": "71329-301",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methylprednisolone Sodium Succinate",
"NonProprietaryName": "Methylprednisolone",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20210420",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212396",
"LabelerName": "GeneYork Pharmaceuticals Group LLC",
"SubstanceName": "METHYLPREDNISOLONE SODIUM SUCCINATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20210420",
"SamplePackage": "N",
"IndicationAndUsage": "When oral therapy is not feasible, and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, the intravenous or intramuscular use of methylprednisolone sodium succinate for injection, USP is indicated as follows. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, perennial or seasonal allergic rhinitis, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond-Blackfan anemia), idiopathic thrombocytopenic purpura in adults (intravenous administration only; intramuscular administration is contraindicated), pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous System: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor, or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, temporal arteritis, polymyositis, and systemic lupus erythematosus.",
"Description": "Methylprednisolone sodium succinate for injection, USP is an anti-inflammatory glucocorticoid, which contains methylprednisolone sodium succinate as the active ingredient. Methylprednisolone sodium succinate, USP, is the sodium succinate ester of methylprednisolone, and it occurs as a white, or nearly white, odorless hygroscopic, amorphous solid. It is very soluble in water and in alcohol; it is insoluble in chloroform and is very slightly soluble in acetone.The chemical name for methylprednisolone sodium succinate is pregna-1,4-diene-3,20-dione, 21-(3-carboxy-1-oxopropoxy)-11, 17-dihydroxy-6-methyl-monosodium salt, (6α, 11β), and the molecular weight is 496.53. The structural formula is represented below. Methylprednisolone sodium succinate is soluble in water; it may be administered in a small volume of diluent and is well suited for intravenous use in situations where high blood levels of methylprednisolone are required rapidly. Methylprednisolone sodium succinate for injection, USP is available in following strengths for intravenous or intramuscular administration. 40 mg (Single- Dose Vial) Each mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 40 mg methylprednisolone, also 1.6 mg monobasic sodium phosphate anhydrous; 17.46 mg dibasic sodium phosphate dried; and 25mg lactose hydrous. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative. 125 mg (Single- Dose Vial) Each 2 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 125 mg methylprednisolone; also 1.6 mg monobasic sodium phosphate anhydrous; and 17.4 mg dibasic sodium phosphate dried. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative. 500mg (Multi-Dose) Each 8 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 500 mg methylprednisolone; also 6.4 mg monobasic sodium phosphate anhydrous; 69.6 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. 1 gram (Multi-Dose) Each 16 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 1 gram methylprednisolone; also 12.8 mg monobasic sodium phosphate anhydrous; 139.2 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. 2 gram (Single- Dose Vial) Each 30.6 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 2 grams methylprednisolone; also 25.6 mg monobasic sodium phosphate anhydrous; 278 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. IMPORTANT – Use only Water for Injection or Bacteriostatic Water for Injection with Benzyl Alcohol when reconstituting methylprednisolone sodium succinate for injection, USP. Use within 48 hours after mixing. When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8 and the tonicities are, for the 40 mg per mL solution, 0.50 osmolar; for the 125 mg per 2 mL solution, 0.40 osmolar; for the 1gram per 8 mL solution, 0.44 osmolar; for the 2 gram per 30.6 mL solutions, 0.42 osmolar. (Isotonic saline=0.28 osmolar.)."
},
{
"NDCCode": "71329-302-25",
"PackageDescription": "25 VIAL in 1 CARTON (71329-302-25) > 2 mL in 1 VIAL (71329-302-01) ",
"NDC11Code": "71329-0302-25",
"ProductNDC": "71329-302",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methylprednisolone Sodium Succinate",
"NonProprietaryName": "Methylprednisolone",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20210420",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212396",
"LabelerName": "GeneYork Pharmaceuticals Group LLC",
"SubstanceName": "METHYLPREDNISOLONE SODIUM SUCCINATE",
"StrengthNumber": "125",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20210420",
"SamplePackage": "N",
"IndicationAndUsage": "When oral therapy is not feasible, and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, the intravenous or intramuscular use of methylprednisolone sodium succinate for injection, USP is indicated as follows. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, perennial or seasonal allergic rhinitis, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond-Blackfan anemia), idiopathic thrombocytopenic purpura in adults (intravenous administration only; intramuscular administration is contraindicated), pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous System: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor, or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, temporal arteritis, polymyositis, and systemic lupus erythematosus.",
"Description": "Methylprednisolone sodium succinate for injection, USP is an anti-inflammatory glucocorticoid, which contains methylprednisolone sodium succinate as the active ingredient. Methylprednisolone sodium succinate, USP, is the sodium succinate ester of methylprednisolone, and it occurs as a white, or nearly white, odorless hygroscopic, amorphous solid. It is very soluble in water and in alcohol; it is insoluble in chloroform and is very slightly soluble in acetone.The chemical name for methylprednisolone sodium succinate is pregna-1,4-diene-3,20-dione, 21-(3-carboxy-1-oxopropoxy)-11, 17-dihydroxy-6-methyl-monosodium salt, (6α, 11β), and the molecular weight is 496.53. The structural formula is represented below. Methylprednisolone sodium succinate is soluble in water; it may be administered in a small volume of diluent and is well suited for intravenous use in situations where high blood levels of methylprednisolone are required rapidly. Methylprednisolone sodium succinate for injection, USP is available in following strengths for intravenous or intramuscular administration. 40 mg (Single- Dose Vial) Each mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 40 mg methylprednisolone, also 1.6 mg monobasic sodium phosphate anhydrous; 17.46 mg dibasic sodium phosphate dried; and 25mg lactose hydrous. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative. 125 mg (Single- Dose Vial) Each 2 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 125 mg methylprednisolone; also 1.6 mg monobasic sodium phosphate anhydrous; and 17.4 mg dibasic sodium phosphate dried. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative. 500mg (Multi-Dose) Each 8 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 500 mg methylprednisolone; also 6.4 mg monobasic sodium phosphate anhydrous; 69.6 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. 1 gram (Multi-Dose) Each 16 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 1 gram methylprednisolone; also 12.8 mg monobasic sodium phosphate anhydrous; 139.2 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. 2 gram (Single- Dose Vial) Each 30.6 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 2 grams methylprednisolone; also 25.6 mg monobasic sodium phosphate anhydrous; 278 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. IMPORTANT – Use only Water for Injection or Bacteriostatic Water for Injection with Benzyl Alcohol when reconstituting methylprednisolone sodium succinate for injection, USP. Use within 48 hours after mixing. When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8 and the tonicities are, for the 40 mg per mL solution, 0.50 osmolar; for the 125 mg per 2 mL solution, 0.40 osmolar; for the 1gram per 8 mL solution, 0.44 osmolar; for the 2 gram per 30.6 mL solutions, 0.42 osmolar. (Isotonic saline=0.28 osmolar.)."
},
{
"NDCCode": "71329-304-01",
"PackageDescription": "16 mL in 1 VIAL (71329-304-01) ",
"NDC11Code": "71329-0304-01",
"ProductNDC": "71329-304",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methylprednisolone Sodium Succinate",
"NonProprietaryName": "Methylprednisolone",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20210420",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212396",
"LabelerName": "GeneYork Pharmaceuticals Group LLC",
"SubstanceName": "METHYLPREDNISOLONE SODIUM SUCCINATE",
"StrengthNumber": "1",
"StrengthUnit": "g/16mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20210420",
"SamplePackage": "N",
"IndicationAndUsage": "When oral therapy is not feasible, and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, the intravenous or intramuscular use of methylprednisolone sodium succinate for injection, USP is indicated as follows. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, perennial or seasonal allergic rhinitis, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond-Blackfan anemia), idiopathic thrombocytopenic purpura in adults (intravenous administration only; intramuscular administration is contraindicated), pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous System: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor, or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, temporal arteritis, polymyositis, and systemic lupus erythematosus.",
"Description": "Methylprednisolone sodium succinate for injection, USP is an anti-inflammatory glucocorticoid, which contains methylprednisolone sodium succinate as the active ingredient. Methylprednisolone sodium succinate, USP, is the sodium succinate ester of methylprednisolone, and it occurs as a white, or nearly white, odorless hygroscopic, amorphous solid. It is very soluble in water and in alcohol; it is insoluble in chloroform and is very slightly soluble in acetone.The chemical name for methylprednisolone sodium succinate is pregna-1,4-diene-3,20-dione, 21-(3-carboxy-1-oxopropoxy)-11, 17-dihydroxy-6-methyl-monosodium salt, (6α, 11β), and the molecular weight is 496.53. The structural formula is represented below. Methylprednisolone sodium succinate is soluble in water; it may be administered in a small volume of diluent and is well suited for intravenous use in situations where high blood levels of methylprednisolone are required rapidly. Methylprednisolone sodium succinate for injection, USP is available in following strengths for intravenous or intramuscular administration. 40 mg (Single- Dose Vial) Each mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 40 mg methylprednisolone, also 1.6 mg monobasic sodium phosphate anhydrous; 17.46 mg dibasic sodium phosphate dried; and 25mg lactose hydrous. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative. 125 mg (Single- Dose Vial) Each 2 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 125 mg methylprednisolone; also 1.6 mg monobasic sodium phosphate anhydrous; and 17.4 mg dibasic sodium phosphate dried. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative. 500mg (Multi-Dose) Each 8 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 500 mg methylprednisolone; also 6.4 mg monobasic sodium phosphate anhydrous; 69.6 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. 1 gram (Multi-Dose) Each 16 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 1 gram methylprednisolone; also 12.8 mg monobasic sodium phosphate anhydrous; 139.2 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. 2 gram (Single- Dose Vial) Each 30.6 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 2 grams methylprednisolone; also 25.6 mg monobasic sodium phosphate anhydrous; 278 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. IMPORTANT – Use only Water for Injection or Bacteriostatic Water for Injection with Benzyl Alcohol when reconstituting methylprednisolone sodium succinate for injection, USP. Use within 48 hours after mixing. When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8 and the tonicities are, for the 40 mg per mL solution, 0.50 osmolar; for the 125 mg per 2 mL solution, 0.40 osmolar; for the 1gram per 8 mL solution, 0.44 osmolar; for the 2 gram per 30.6 mL solutions, 0.42 osmolar. (Isotonic saline=0.28 osmolar.)."
},
{
"NDCCode": "71329-305-01",
"PackageDescription": "30.6 mL in 1 VIAL (71329-305-01) ",
"NDC11Code": "71329-0305-01",
"ProductNDC": "71329-305",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methylprednisolone Sodium Succinate",
"NonProprietaryName": "Methylprednisolone",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20210420",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212396",
"LabelerName": "GeneYork Pharmaceuticals Group LLC",
"SubstanceName": "METHYLPREDNISOLONE SODIUM SUCCINATE",
"StrengthNumber": "2",
"StrengthUnit": "g/30.6mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20210420",
"SamplePackage": "N",
"IndicationAndUsage": "When oral therapy is not feasible, and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, the intravenous or intramuscular use of methylprednisolone sodium succinate for injection, USP is indicated as follows. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, perennial or seasonal allergic rhinitis, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond-Blackfan anemia), idiopathic thrombocytopenic purpura in adults (intravenous administration only; intramuscular administration is contraindicated), pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous System: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor, or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, temporal arteritis, polymyositis, and systemic lupus erythematosus.",
"Description": "Methylprednisolone sodium succinate for injection, USP is an anti-inflammatory glucocorticoid, which contains methylprednisolone sodium succinate as the active ingredient. Methylprednisolone sodium succinate, USP, is the sodium succinate ester of methylprednisolone, and it occurs as a white, or nearly white, odorless hygroscopic, amorphous solid. It is very soluble in water and in alcohol; it is insoluble in chloroform and is very slightly soluble in acetone.The chemical name for methylprednisolone sodium succinate is pregna-1,4-diene-3,20-dione, 21-(3-carboxy-1-oxopropoxy)-11, 17-dihydroxy-6-methyl-monosodium salt, (6α, 11β), and the molecular weight is 496.53. The structural formula is represented below. Methylprednisolone sodium succinate is soluble in water; it may be administered in a small volume of diluent and is well suited for intravenous use in situations where high blood levels of methylprednisolone are required rapidly. Methylprednisolone sodium succinate for injection, USP is available in following strengths for intravenous or intramuscular administration. 40 mg (Single- Dose Vial) Each mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 40 mg methylprednisolone, also 1.6 mg monobasic sodium phosphate anhydrous; 17.46 mg dibasic sodium phosphate dried; and 25mg lactose hydrous. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative. 125 mg (Single- Dose Vial) Each 2 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 125 mg methylprednisolone; also 1.6 mg monobasic sodium phosphate anhydrous; and 17.4 mg dibasic sodium phosphate dried. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative. 500mg (Multi-Dose) Each 8 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 500 mg methylprednisolone; also 6.4 mg monobasic sodium phosphate anhydrous; 69.6 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. 1 gram (Multi-Dose) Each 16 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 1 gram methylprednisolone; also 12.8 mg monobasic sodium phosphate anhydrous; 139.2 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. 2 gram (Single- Dose Vial) Each 30.6 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 2 grams methylprednisolone; also 25.6 mg monobasic sodium phosphate anhydrous; 278 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. IMPORTANT – Use only Water for Injection or Bacteriostatic Water for Injection with Benzyl Alcohol when reconstituting methylprednisolone sodium succinate for injection, USP. Use within 48 hours after mixing. When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8 and the tonicities are, for the 40 mg per mL solution, 0.50 osmolar; for the 125 mg per 2 mL solution, 0.40 osmolar; for the 1gram per 8 mL solution, 0.44 osmolar; for the 2 gram per 30.6 mL solutions, 0.42 osmolar. (Isotonic saline=0.28 osmolar.)."
},
{
"NDCCode": "11084-303-01",
"PackageDescription": "47 mL in 1 BOTTLE, PUMP (11084-303-01) ",
"NDC11Code": "11084-0303-01",
"ProductNDC": "11084-303",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Instantfoam Complete Pure",
"NonProprietaryName": "Alcohol",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20191001",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "505G(a)(3)",
"LabelerName": "SC Johnson Professional USA Inc.",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "80",
"StrengthUnit": "g/100mL",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20191001",
"EndMarketingDatePackage": "20241231",
"SamplePackage": "N",
"IndicationAndUsage": "to decrease bacteria on the skin that could cause disease. recommended for repeated use."
},
{
"NDCCode": "11319-303-01",
"PackageDescription": "25 kg in 1 DRUM (11319-303-01) ",
"NDC11Code": "11319-0303-01",
"ProductNDC": "11319-303",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Camphor Powder Synthetic",
"DosageFormName": "POWDER",
"StartMarketingDate": "20190101",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Ungerer And Company",
"SubstanceName": "CAMPHOR (SYNTHETIC)",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "01-JAN-19"
},
{
"NDCCode": "13537-303-02",
"PackageDescription": "1 TUBE in 1 BOX (13537-303-02) > 4 g in 1 TUBE (13537-303-01)",
"NDC11Code": "13537-0303-02",
"ProductNDC": "13537-303",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Esika",
"ProprietaryNameSuffix": "Extreme Moisturizing Spf 16",
"NonProprietaryName": "Octinoxate And Oxybenzone",
"DosageFormName": "LIPSTICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20110517",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Ventura Corporation (San Juan, P.R)",
"SubstanceName": "OCTINOXATE; OXYBENZONE",
"StrengthNumber": ".0664; .0151",
"StrengthUnit": "g/g; g/g",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Helps prevent sunburn."
},
{
"NDCCode": "14141-303-01",
"PackageDescription": "1 CASE in 1 BOX (14141-303-01) / 10 g in 1 CASE",
"NDC11Code": "14141-0303-01",
"ProductNDC": "14141-303",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Lbel Forever Stay Polvos Compactos De Larga Duracion Fps 15 Long Lasting Compact Spf 15 Solei 200",
"NonProprietaryName": "Titanium Dioxide, Zinc Oxide",
"DosageFormName": "POWDER",
"RouteName": "TOPICAL",
"StartMarketingDate": "20220803",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "BEL STAR S A",
"SubstanceName": "TITANIUM DIOXIDE; ZINC OXIDE",
"StrengthNumber": "57.5; 49",
"StrengthUnit": "mg/g; mg/g",
"Status": "Active",
"LastUpdate": "2024-12-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220803",
"SamplePackage": "N",
"IndicationAndUsage": "Helps prevent sunburn."
},
{
"NDCCode": "16729-303-01",
"PackageDescription": "100 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (16729-303-01) ",
"NDC11Code": "16729-0303-01",
"ProductNDC": "16729-303",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diltiazem Hydrochloride",
"NonProprietaryName": "Diltiazem Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20200911",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206997",
"LabelerName": "Accord Healthcare, Inc.",
"SubstanceName": "DILTIAZEM HYDROCHLORIDE",
"StrengthNumber": "120",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-10-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200911",
"SamplePackage": "N",
"IndicationAndUsage": "Diltiazem Hydrochloride Extended-release Capsules, USP are indicated for the treatment of hypertension. Diltiazem hydrochloride may be used alone or in combination with other antihypertensive medications, such as diuretics. Diltiazem Hydrochloride Extended-release Capsules, USP are indicated for the management of chronic stable angina.",
"Description": "Diltiazem hydrochloride is a calcium ion influx inhibitor (slow channel blocker or calcium antagonist). Chemically, diltiazem hydrochloride is 1,5-Benzothiazepin-4(5 H)one, 3-(acetyloxy)-5-[2-(dimethylamino)ethyl]-2,3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride, (+)-cis-. Its molecular formula is C 22H 26N 2O 4SHCl and its molecular weight is 450.98. Its structural formula is as follows:. Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. FDA approved dissolution specification differ from the USP dissolution specification. Diltiazem Hydrochloride Extended-release Capsules, USP contain multiple units of diltiazem HCl extended-release 60 mg, resulting in 120 mg, 180 mg, or 240 mg dosage strengths allowing for the controlled release of diltiazem HCl over a 24-hour period. Inactive Ingredients:Diltiazem Hydrochloride Extended-release Capsules, USP also contain colloidal anhydrous silica, hydroxypropyl methyl cellulose, mannitol and magnesium stearate. The 120 mg capsule shell contains gelatin, titanium dioxide, sodium lauryl sulfate, FD &C Yellow 6, D &C Yellow 10. The 180 mg capsule shell contains gelatin, titanium dioxide, sodium lauryl sulfate, D &C Yellow 10, D &C Red 28, FD &C Red 40. The 240 mg capsule shell contains gelatin, titanium dioxide, sodium lauryl sulfate, iron oxide black, iron oxide red, iron oxide yellow. The imprinting ink of the tablet consists of shellac, iron oxide black and potassium hydroxide. For oral administration."
},
{
"NDCCode": "27808-303-01",
"PackageDescription": "100 TABLET, EXTENDED RELEASE in 1 BOTTLE (27808-303-01) ",
"NDC11Code": "27808-0303-01",
"ProductNDC": "27808-303",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoprolol Succinate",
"NonProprietaryName": "Metoprolol Succinate",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20250601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207206",
"LabelerName": "Cranbury Pharmaceuticals, LLC",
"SubstanceName": "METOPROLOL SUCCINATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250601",
"SamplePackage": "N",
"Description": "Metoprolol succinate, USP, is a beta1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended-release tablets. Metoprolol succinate extended-release tablets, USP have been formulated to provide a controlled and predictable release of metoprolol for once-daily administration. The tablets comprise a multiple unit system containing metoprolol succinate in a multitude of controlled release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The tablets contain 23.75, 47.5, 95 and 190 mg of metoprolol succinate, USP equivalent to 25, 50, 100 and 200 mg of metoprolol tartrate, USP, respectively. Its chemical name is (±)1- (isopropyl amino)-3-[p-(2-methoxyethyl) phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is. Metoprolol succinate, USP is a white crystalline powder with a molecular weight of 652.8. It is freely soluble in water; soluble in methanol; sparingly soluble in ethanol; slightly soluble in dichloromethane and 2-propanol; practically insoluble in ethyl acetate, acetone, diethyl ether, and heptane. Inactive ingredients: ethylcellulose, hypromellose type 2208, hypromellose type 2910, lecithin, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, talc, titanium dioxide."
},
{
"NDCCode": "27854-303-01",
"PackageDescription": "40 PACKET in 1 BOX (27854-303-01) / 1 TABLET in 1 PACKET",
"NDC11Code": "27854-0303-01",
"ProductNDC": "27854-303",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sedalmex Forte",
"NonProprietaryName": "Acetaminophen, Aspirin, Caffeine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240601",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M013",
"LabelerName": "Belmora LLC",
"SubstanceName": "ACETAMINOPHEN; ASPIRIN; CAFFEINE",
"StrengthNumber": "250; 250; 65",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Cyclooxygenase Inhibitors [MoA], Decreased Platelet Aggregation [PE], Decreased Prostaglandin Production [PE], Methylxanthine [EPC], Nonsteroidal Anti-inflammatory Drug [EPC], Platelet Aggregation Inhibitor [EPC], Xanthines [CS]",
"Status": "Active",
"LastUpdate": "2024-06-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240601",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves minor aches and pains due to. headache muscular aches arthritis pain. a cold toothache premenstrual and menstrual cramps."
},
{
"NDCCode": "35356-303-01",
"PackageDescription": "100 TABLET in 1 BOTTLE, PLASTIC (35356-303-01)",
"NDC11Code": "35356-0303-01",
"ProductNDC": "35356-303",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prandin",
"NonProprietaryName": "Repaglinide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20101012",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020741",
"LabelerName": "Lake Erie Medical DBA Quality Care Products LLC",
"SubstanceName": "REPAGLINIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Glinide [EPC],Potassium Channel Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-01-08",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "41250-303-01",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (41250-303-01) > 10 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "41250-0303-01",
"ProductNDC": "41250-303",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Itchy Eye",
"NonProprietaryName": "Ketotifen Fumarate",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20160126",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077958",
"LabelerName": "Meijer Distribution Inc",
"SubstanceName": "KETOTIFEN FUMARATE",
"StrengthNumber": ".35",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20160126",
"SamplePackage": "N",
"IndicationAndUsage": "Temporarily relieves itchy eyes due to pollen, ragweed, grass, animal hair and dander."
},
{
"NDCCode": "42571-303-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (42571-303-01) ",
"NDC11Code": "42571-0303-01",
"ProductNDC": "42571-303",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Chlordiazepoxide And Amitriptyline Hydrochloride",
"NonProprietaryName": "Chlordiazepoxide And Amitriptyline Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211925",
"LabelerName": "Micro Labs Limited",
"SubstanceName": "AMITRIPTYLINE HYDROCHLORIDE; CHLORDIAZEPOXIDE",
"StrengthNumber": "10; 25",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS], Tricyclic Antidepressant [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2026-08-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220401",
"SamplePackage": "N",
"IndicationAndUsage": "Chlordiazepoxide and amitriptyline hydrochloride tablets are indicated for the treatment of patients with moderate to severe depression associated with moderate to severe anxiety. The therapeutic response to chlordiazepoxide and amitriptyline hydrochloride tablet occurs earlier and with fewer treatment failures than when either amitriptyline or chlordiazepoxide is used alone. Symptoms likely to respond in the first week of treatment include: insomnia, feelings of guilt or worthlessness, agitation, psychic and somatic anxiety, suicidal ideation and anorexia.",
"Description": "Chlordiazepoxide and amitriptyline hydrochloride tablets, USP combine for oral administration, chlordiazepoxide, an agent for the relief of anxiety and tension, and amitriptyline, an antidepressant. It is available in as white, round, biconvex film-coated tablets debossed 'CA2'on one side and the other side is plain, each containing 10 mg chlordiazepoxide and 25 mg amitriptyline (as the hydrochloride salt); and in green, round, biconvex, film-coated tablets debossed 'CA1 'on one side and the other side is plain, each containing 5 mg chlordiazepoxide and 12.5 mg amitriptyline (as the hydrochloride salt). Each tablet also contains hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, silicon dioxide, sodium starch glycolate, talc and titanium dioxide. In addition, the 10 mg/25 mg tablet contains polyethylene glycol 400 and 5 mg/12.5 mg tablet contains D&C YELLOW NO.10, FD&C BLUE NO.1, FD & C YELLOW NO. 6 and polyethylene glycol 6000. Chlordiazepoxide USP is a benzodiazepine with the formula 7-chloro-2-(methyl-amino)-5-phenyl- 3H-1,4-benzodiazepine 4-oxide. It is a slightly yellow crystalline material and is insoluble in water. The molecular weight is 299.76. Amitriptyline Hydrochloride USP is a dibenzocycloheptadiene derivative. The formula is 10,11-dihydro- N,N-dimethyl-5H-dibenzo [a,d] cycloheptene-Δ 5,γ-propylamine hydrochloride. It is a white or practically white crystalline compound that is freely soluble in water. The molecular weight is 313.87."
},
{
"NDCCode": "42677-303-01",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (42677-303-01) ",
"NDC11Code": "42677-0303-01",
"ProductNDC": "42677-303",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rosuvastatin Calcium",
"NonProprietaryName": "Rosuvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260417",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207375",
"LabelerName": "Shandong New Time Pharmaceutical Co., Ltd.",
"SubstanceName": "ROSUVASTATIN CALCIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-05-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260417",
"SamplePackage": "N",
"IndicationAndUsage": "Rosuvastatin tablets are indicated: 1 To reduce the risk of major adverse cardiovascular (CV) events (CV death, nonfatal myocardial infarction, nonfatal stroke, or an arterial revascularization procedure) in adults without established coronary heart disease who are at increased risk of CV disease based on age, high-sensitivity C-reactive protein (hsCRP) ≥2 mg/L, and at least one additional CV risk factor., 2 As an adjunct to diet to: Reduce low-density lipoprotein cholesterol (LDL-C) in adults with primary hyperlipidemia.Reduce low-density lipoprotein cholesterol (LDL-C) and slow the progression of atherosclerosis in adults.Reduce LDL-C in adults and pediatric patients aged 8 years and older with heterozygous familial hypercholesterolemia (HeFH)., 3 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 7 years and older with homozygous familial hypercholesterolemia (HoFH)., 4 As an adjunct to diet for the treatment of adults with: Primary dysbetalipoproteinemia.Hypertriglyceridemia.",
"Description": "Rosuvastatin calcium, USP is a 3-hydroxy-3-methylglutaryl coenzyme A (HMG CoA)-reductase inhibitor. The chemical name for rosuvastatin calcium is bis[(E)-7-[4-(4-fluorophenyl)-6-isopropyl-2[methyl(methylsulfonyl)amino] pyrimidin-5-yl](3R,5S)-3,5-dihydroxyhept-6-enoic acid] calcium salt with the following structural formula. The empirical formula for rosuvastatin calcium, USP is (C 22H 27FN 3O 6S) 2Ca and the molecular weight is 1,001.14. Rosuvastatin calcium is a white amorphous powder that is sparingly soluble in water and methanol, and slightly soluble in ethanol. Rosuvastatin calcium is a hydrophilic compound with a partition coefficient (octanol/water) of 0.13 at pH of 7.0. Rosuvastatin tablets, USP for oral use contain rosuvastatin 5 mg, 10 mg, 20 mg, or 40 mg (equivalent to 5.2 mg, 10.4 mg, 20.8 mg, and 41.6 mg rosuvastatin calcium) and the following inactive ingredients: Each tablet contains: mannitol, meglumine, hypromellose, microcrystalline cellulose, crospovidone, magnesium stearate, HPMC 2910/hypromellose, titanium dioxide, lactose monohydrate, macrogol, triacetin and iron oxide red."
},
{
"NDCCode": "42858-303-01",
"PackageDescription": "100 TABLET in 1 BOTTLE, PLASTIC (42858-303-01) ",
"NDC11Code": "42858-0303-01",
"ProductNDC": "42858-303",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydromorphone Hydrochloride",
"NonProprietaryName": "Hydromorphone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091123",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA019892",
"LabelerName": "Rhodes Pharmaceuticals LLC",
"SubstanceName": "HYDROMORPHONE HYDROCHLORIDE",
"StrengthNumber": "8",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20091123",
"SamplePackage": "N",
"IndicationAndUsage": "Hydromorphone hydrochloride oral solution and hydromorphone hydrochloride tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.",
"Description": "Hydromorphone hydrochloride, a hydrogenated ketone of morphine, is an opioid agonist. Hydromorphone hydrochloride tablets are supplied in 2 mg, 4 mg, and 8 mg tablets for oral administration. The tablet strengths describe the amount of hydromorphone hydrochloride in each tablet. Hydromorphone hydrochloride oral solution is supplied as 5 mg/5 mL (1 mg/mL) viscous liquid. The chemical name is 4,5α-epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The molecular weight is 321.80. Its molecular formula is C17H19NO3∙HCl, and it has the following chemical structure. Hydromorphone hydrochloride is a white or almost white crystalline powder that is freely soluble in water, very slightly soluble in ethanol (96%), and practically insoluble in methylene chloride. The 2 mg, 4 mg, and 8 mg tablets contain the following inactive ingredients: lactose anhydrous and magnesium stearate. Hydromorphone hydrochloride tablets may also contain traces of sodium metabisulfite. The 2 mg tablets also contain D&C red #30 Lake dye and D&C yellow #10 Lake dye. The 4 mg tablets also contain D&C yellow #10 Lake dye. Each 5 mL (1 teaspoon) of hydromorphone hydrochloride oral solution contains 5 mg of hydromorphone hydrochloride. The inactive ingredients are purified water, methylparaben, propylparaben, sucrose, and glycerin. Hydromorphone hydrochloride oral solution may contain traces of sodium metabisulfite."
},
{
"NDCCode": "42865-303-01",
"PackageDescription": "12 CAPSULE, DELAYED RELEASE in 1 BOTTLE, PLASTIC (42865-303-01) ",
"NDC11Code": "42865-0303-01",
"ProductNDC": "42865-303",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zenpep",
"NonProprietaryName": "Pancrelipase",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20090922",
"EndMarketingDate": "20200131",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022210",
"LabelerName": "Allergan, Inc.",
"SubstanceName": "PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE",
"StrengthNumber": "20000; 68000; 109000",
"StrengthUnit": "[USP'U]/1; [USP'U]/1; [USP'U]/1",
"Status": "Deprecated",
"LastUpdate": "2020-02-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20090922",
"EndMarketingDatePackage": "20200131",
"SamplePackage": "N"
},
{
"NDCCode": "42998-303-01",
"PackageDescription": "5 mL in 1 VIAL, GLASS (42998-303-01)",
"NDC11Code": "42998-0303-01",
"ProductNDC": "42998-303",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amytal Sodium",
"NonProprietaryName": "Amobarbital Sodium",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20080925",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Marathon Pharmaceuticals, LLC",
"SubstanceName": "AMOBARBITAL SODIUM",
"StrengthNumber": ".5",
"StrengthUnit": "g/5mL",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "43473-303-01",
"PackageDescription": "59.1 mL in 1 BOTTLE (43473-303-01) ",
"NDC11Code": "43473-0303-01",
"ProductNDC": "43473-303",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Lightning X Antiseptic",
"NonProprietaryName": "Benzalkonium Chloride",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20240108",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M003",
"LabelerName": "Nantong Health & Beyond Hygienic Products Inc.",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": "1.3",
"StrengthUnit": "mg/100mL",
"Status": "Active",
"LastUpdate": "2024-01-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240108",
"SamplePackage": "N"
},
{
"NDCCode": "44827-303-01",
"PackageDescription": "5 AMPULE in 1 BOX (44827-303-01) > 1 mL in 1 AMPULE",
"NDC11Code": "44827-0303-01",
"ProductNDC": "44827-303",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dehydrated Alcohol",
"NonProprietaryName": "Dehydrated Alcohol Injection",
"DosageFormName": "SOLUTION",
"RouteName": "INTRASPINAL",
"StartMarketingDate": "19900930",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Valesco Pharmaceuticals",
"SubstanceName": "ALCOHOL",
"StrengthNumber": ".98",
"StrengthUnit": "mL/mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Dehydrated Alcohol Injection is indicated for therapeutic neurolysis of nerves or ganglia for the relief of intractable chronic pain in such conditions as inoperable cancer and trigeminal neuralgia (ticdouloureux), in patients for whom neurosurgical procedures are contraindicated. Relief of trigeminal neuralgia usually is only temporary. Other conditions for which injection of alcohol has been reported include glossopharyngeal neuralgia, angina pectoris and severe claudication due to peripheral vascular insufficiency. Alcohol concentrations of 40 to 50% (prepared by appropriate dilution of dehydrated alcohol) have been used for epidural or individual motor nerve injections to control certain manifestations of cerebral palsy and spastic paraplegia. Similar concentrations also have been injected for celiac plexus block to relieve pain of inoperable upper abdominal cancer, and have been injected intra-and subcutaneously for relief of intractable pruritus ani.",
"Description": "Dehydrated Alcohol Injection, USP consists of not less than 98% by volume of ethanol (ethyl alcohol). Dehydrated alcohol is hypobaric in relation to the cerebrospinal fluid. It is injected proximate to nerve tissues and into spinal subarachnoid spaces to produce degeneration of nerve function (neurolysis) for control of chronic pain. The product contains no bacteriostat or antimicrobial agent (other than ethanol) and no added buffer. Dehydrated alcohol is a clear, colorless liquid miscible with water and has the following structural formula."
},
{
"NDCCode": "47426-303-01",
"PackageDescription": "1 CARTON in 1 KIT (47426-303-01) / 1 VIAL, SINGLE-DOSE in 1 CARTON (47426-303-03) / 7 mL in 1 VIAL, SINGLE-DOSE (47426-303-05) ",
"NDC11Code": "47426-0303-01",
"ProductNDC": "47426-303",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zynrelef",
"NonProprietaryName": "Bupivacaine And Meloxicam",
"DosageFormName": "SOLUTION",
"RouteName": "INFILTRATION",
"StartMarketingDate": "20210701",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA211988",
"LabelerName": "Heron Therapeutics, Inc.",
"SubstanceName": "BUPIVACAINE; MELOXICAM",
"StrengthNumber": "200; 6",
"StrengthUnit": "mg/7mL; mg/7mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Local Anesthesia [PE], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210701",
"SamplePackage": "N",
"IndicationAndUsage": "ZYNRELEF is indicated in adults for postsurgical analgesia for up to 72 hours after: 1 soft tissue surgical procedures, 2 orthopedic surgical procedures–foot and ankle procedures–other orthopedic surgical procedures (e.g., total joint arthroplasty) in which direct exposure to articular cartilage is avoided [see Warnings and Precautions (5.10)].",
"Description": "ZYNRELEF (bupivacaine and meloxicam) extended-release solution, for soft tissue or periarticular instillation use, contains bupivacaine, an amide local anesthetic, and meloxicam, a nonsteroidal anti-inflammatory drug (NSAID)."
},
{
"NDCCode": "47781-303-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (47781-303-01) ",
"NDC11Code": "47781-0303-01",
"ProductNDC": "47781-303",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nitrofurantoin Monohydrate/ Macrocrystalline",
"NonProprietaryName": "Nitrofurantoin Monohydrate/macrocrystalline",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20110525",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020064",
"LabelerName": "Alvogen Inc.",
"SubstanceName": "NITROFURANTOIN; NITROFURANTOIN MONOHYDRATE",
"StrengthNumber": "25; 75",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Nitrofuran Antibacterial [EPC], Nitrofuran Antibacterial [EPC], Nitrofurans [CS], Nitrofurans [CS]",
"Status": "Active",
"LastUpdate": "2025-10-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20110525",
"SamplePackage": "N",
"IndicationAndUsage": "Nitrofurantoin capsules (monohydrate/macrocrystals) are indicated only for the treatment of acute uncomplicated urinary tract infections (acute cystitis) caused by susceptible strains of Escherichia coli or Staphylococcus saprophyticus. Nitrofurantoin is not indicated for the treatment of pyelonephritis or perinephric abscesses. To reduce the development of drug-resistant bacteria and maintain the effectiveness of nitrofurantoin capsules (monohydrate/macrocrystals) and other antibacterial drugs, nitrofurantoin capsules (monohydrate/macrocrystals) should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Nitrofurantoins lack the broader tissue distribution of other therapeutic agents approved for urinary tract infections. Consequently, many patients who are treated with nitrofurantoin capsules (monohydrate/macrocrystals) are predisposed to persistence or reappearance of bacteriuria. (See CLINICAL STUDIES.) Urine specimens for culture and susceptibility testing should be obtained before and after completion of therapy. If persistence or reappearance of bacteriuria occurs after treatment with nitrofurantoin capsules (monohydrate/macrocrystals), other therapeutic agents with broader tissue distribution should be selected. In considering the use of nitrofurantoin capsules (monohydrate/macrocrystals) lower eradication rates should be balanced against the increased potential for systemic toxicity and for the development of antimicrobial resistance when agents with broader tissue distribution are utilized.",
"Description": "Nitrofurantoin is an antibacterial agent specific for urinary tract infections. Nitrofurantoin capsules, USP (monohydrate/macrocrystals) is a hard gelatin capsule. Each capsule contains 100 mg of nitrofurantoin in the form of 25 mg of nitrofurantoin macrocrystals and 75 mg of nitrofurantoin monohydrate. The chemical name of nitrofurantoin macrocrystals is 1-[[[5-nitro-2-furanyl]methylene] amino]-2,4-imidazolidinedione. The chemical structure is the following. Molecular Weight: 238.16. The chemical name of nitrofurantoin monohydrate is 1-[[[5-nitro-2-furanyl]methylene] amino]-2,4- imidazolidinedione monohydrate. The chemical structure is the following. Molecular Weight: 256.17. Inactive Ingredients: Each capsule contains carbomer 934P, corn starch, compressible sugar, D&C Yellow No. 10, edible gray ink, FD&C Blue No. 1, FD&C Red No. 40, gelatin, lactose, magnesium stearate, povidone, talc, and titanium dioxide. Meets USP Dissolution Test 8."
},
{
"NDCCode": "47993-303-01",
"PackageDescription": "20 mL in 1 BOTTLE (47993-303-01) ",
"NDC11Code": "47993-0303-01",
"ProductNDC": "47993-303",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Antibacterial Hand Sanitizerspray",
"NonProprietaryName": "Ethyl Alcohol",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200724",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "NINGBO JIANGBEI OCEAN STAR TRADING CO.,LTD",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "62",
"StrengthUnit": "g/112mL",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20200724",
"SamplePackage": "N",
"IndicationAndUsage": "Uses：. For hand sanitizing to reduce bacteria on the skin."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>71329-303-01</NDCCode>
<PackageDescription>8 mL in 1 VIAL (71329-303-01) </PackageDescription>
<NDC11Code>71329-0303-01</NDC11Code>
<ProductNDC>71329-303</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methylprednisolone Sodium Succinate</ProprietaryName>
<NonProprietaryName>Methylprednisolone</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20210420</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212396</ApplicationNumber>
<LabelerName>GeneYork Pharmaceuticals Group LLC</LabelerName>
<SubstanceName>METHYLPREDNISOLONE SODIUM SUCCINATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/8mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210420</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>When oral therapy is not feasible, and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, the intravenous or intramuscular use of methylprednisolone sodium succinate for injection, USP is indicated as follows. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, perennial or seasonal allergic rhinitis, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond-Blackfan anemia), idiopathic thrombocytopenic purpura in adults (intravenous administration only; intramuscular administration is contraindicated), pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous System: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor, or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, temporal arteritis, polymyositis, and systemic lupus erythematosus.</IndicationAndUsage>
<Description>Methylprednisolone sodium succinate for injection, USP is an anti-inflammatory glucocorticoid, which contains methylprednisolone sodium succinate as the active ingredient. Methylprednisolone sodium succinate, USP, is the sodium succinate ester of methylprednisolone, and it occurs as a white, or nearly white, odorless hygroscopic, amorphous solid. It is very soluble in water and in alcohol; it is insoluble in chloroform and is very slightly soluble in acetone.The chemical name for methylprednisolone sodium succinate is pregna-1,4-diene-3,20-dione, 21-(3-carboxy-1-oxopropoxy)-11, 17-dihydroxy-6-methyl-monosodium salt, (6α, 11β), and the molecular weight is 496.53. The structural formula is represented below. Methylprednisolone sodium succinate is soluble in water; it may be administered in a small volume of diluent and is well suited for intravenous use in situations where high blood levels of methylprednisolone are required rapidly. Methylprednisolone sodium succinate for injection, USP is available in following strengths for intravenous or intramuscular administration. 40 mg (Single- Dose Vial) Each mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 40 mg methylprednisolone, also 1.6 mg monobasic sodium phosphate anhydrous; 17.46 mg dibasic sodium phosphate dried; and 25mg lactose hydrous. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative. 125 mg (Single- Dose Vial) Each 2 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 125 mg methylprednisolone; also 1.6 mg monobasic sodium phosphate anhydrous; and 17.4 mg dibasic sodium phosphate dried. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative. 500mg (Multi-Dose) Each 8 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 500 mg methylprednisolone; also 6.4 mg monobasic sodium phosphate anhydrous; 69.6 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. 1 gram (Multi-Dose) Each 16 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 1 gram methylprednisolone; also 12.8 mg monobasic sodium phosphate anhydrous; 139.2 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. 2 gram (Single- Dose Vial) Each 30.6 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 2 grams methylprednisolone; also 25.6 mg monobasic sodium phosphate anhydrous; 278 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. IMPORTANT – Use only Water for Injection or Bacteriostatic Water for Injection with Benzyl Alcohol when reconstituting methylprednisolone sodium succinate for injection, USP. Use within 48 hours after mixing. When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8 and the tonicities are, for the 40 mg per mL solution, 0.50 osmolar; for the 125 mg per 2 mL solution, 0.40 osmolar; for the 1gram per 8 mL solution, 0.44 osmolar; for the 2 gram per 30.6 mL solutions, 0.42 osmolar. (Isotonic saline=0.28 osmolar.).</Description>
</NDC>
<NDC>
<NDCCode>71329-103-01</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (71329-103-01) > 500 TABLET in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>71329-0103-01</NDC11Code>
<ProductNDC>71329-103</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisone</ProprietaryName>
<NonProprietaryName>Prednisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181204</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210525</ApplicationNumber>
<LabelerName>GeneYork Pharmaceuticals Group LLC</LabelerName>
<SubstanceName>PREDNISONE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71329-104-01</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (71329-104-01) > 500 TABLET in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>71329-0104-01</NDC11Code>
<ProductNDC>71329-104</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisone</ProprietaryName>
<NonProprietaryName>Prednisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181204</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210525</ApplicationNumber>
<LabelerName>GeneYork Pharmaceuticals Group LLC</LabelerName>
<SubstanceName>PREDNISONE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71329-105-01</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (71329-105-01) > 100 TABLET in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>71329-0105-01</NDC11Code>
<ProductNDC>71329-105</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisone</ProprietaryName>
<NonProprietaryName>Prednisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181204</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210525</ApplicationNumber>
<LabelerName>GeneYork Pharmaceuticals Group LLC</LabelerName>
<SubstanceName>PREDNISONE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71329-106-01</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (71329-106-01) > 1000 TABLET in 1 BOTTLE</PackageDescription>
<NDC11Code>71329-0106-01</NDC11Code>
<ProductNDC>71329-106</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisone</ProprietaryName>
<NonProprietaryName>Prednisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190104</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211496</ApplicationNumber>
<LabelerName>GeneYork Pharmaceuticals Group LLC</LabelerName>
<SubstanceName>PREDNISONE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190104</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71329-107-01</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (71329-107-01) > 100 TABLET in 1 BOTTLE</PackageDescription>
<NDC11Code>71329-0107-01</NDC11Code>
<ProductNDC>71329-107</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisone</ProprietaryName>
<NonProprietaryName>Prednisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181211</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211495</ApplicationNumber>
<LabelerName>GeneYork Pharmaceuticals Group LLC</LabelerName>
<SubstanceName>PREDNISONE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181211</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71329-108-01</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (71329-108-01) > 1000 TABLET in 1 BOTTLE</PackageDescription>
<NDC11Code>71329-0108-01</NDC11Code>
<ProductNDC>71329-108</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisone</ProprietaryName>
<NonProprietaryName>Prednisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181211</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211495</ApplicationNumber>
<LabelerName>GeneYork Pharmaceuticals Group LLC</LabelerName>
<SubstanceName>PREDNISONE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181211</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71329-301-25</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (71329-301-25) > 1 mL in 1 VIAL (71329-301-01) </PackageDescription>
<NDC11Code>71329-0301-25</NDC11Code>
<ProductNDC>71329-301</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methylprednisolone Sodium Succinate</ProprietaryName>
<NonProprietaryName>Methylprednisolone</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20210420</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212396</ApplicationNumber>
<LabelerName>GeneYork Pharmaceuticals Group LLC</LabelerName>
<SubstanceName>METHYLPREDNISOLONE SODIUM SUCCINATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210420</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>When oral therapy is not feasible, and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, the intravenous or intramuscular use of methylprednisolone sodium succinate for injection, USP is indicated as follows. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, perennial or seasonal allergic rhinitis, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond-Blackfan anemia), idiopathic thrombocytopenic purpura in adults (intravenous administration only; intramuscular administration is contraindicated), pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous System: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor, or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, temporal arteritis, polymyositis, and systemic lupus erythematosus.</IndicationAndUsage>
<Description>Methylprednisolone sodium succinate for injection, USP is an anti-inflammatory glucocorticoid, which contains methylprednisolone sodium succinate as the active ingredient. Methylprednisolone sodium succinate, USP, is the sodium succinate ester of methylprednisolone, and it occurs as a white, or nearly white, odorless hygroscopic, amorphous solid. It is very soluble in water and in alcohol; it is insoluble in chloroform and is very slightly soluble in acetone.The chemical name for methylprednisolone sodium succinate is pregna-1,4-diene-3,20-dione, 21-(3-carboxy-1-oxopropoxy)-11, 17-dihydroxy-6-methyl-monosodium salt, (6α, 11β), and the molecular weight is 496.53. The structural formula is represented below. Methylprednisolone sodium succinate is soluble in water; it may be administered in a small volume of diluent and is well suited for intravenous use in situations where high blood levels of methylprednisolone are required rapidly. Methylprednisolone sodium succinate for injection, USP is available in following strengths for intravenous or intramuscular administration. 40 mg (Single- Dose Vial) Each mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 40 mg methylprednisolone, also 1.6 mg monobasic sodium phosphate anhydrous; 17.46 mg dibasic sodium phosphate dried; and 25mg lactose hydrous. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative. 125 mg (Single- Dose Vial) Each 2 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 125 mg methylprednisolone; also 1.6 mg monobasic sodium phosphate anhydrous; and 17.4 mg dibasic sodium phosphate dried. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative. 500mg (Multi-Dose) Each 8 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 500 mg methylprednisolone; also 6.4 mg monobasic sodium phosphate anhydrous; 69.6 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. 1 gram (Multi-Dose) Each 16 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 1 gram methylprednisolone; also 12.8 mg monobasic sodium phosphate anhydrous; 139.2 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. 2 gram (Single- Dose Vial) Each 30.6 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 2 grams methylprednisolone; also 25.6 mg monobasic sodium phosphate anhydrous; 278 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. IMPORTANT – Use only Water for Injection or Bacteriostatic Water for Injection with Benzyl Alcohol when reconstituting methylprednisolone sodium succinate for injection, USP. Use within 48 hours after mixing. When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8 and the tonicities are, for the 40 mg per mL solution, 0.50 osmolar; for the 125 mg per 2 mL solution, 0.40 osmolar; for the 1gram per 8 mL solution, 0.44 osmolar; for the 2 gram per 30.6 mL solutions, 0.42 osmolar. (Isotonic saline=0.28 osmolar.).</Description>
</NDC>
<NDC>
<NDCCode>71329-302-25</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (71329-302-25) > 2 mL in 1 VIAL (71329-302-01) </PackageDescription>
<NDC11Code>71329-0302-25</NDC11Code>
<ProductNDC>71329-302</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methylprednisolone Sodium Succinate</ProprietaryName>
<NonProprietaryName>Methylprednisolone</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20210420</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212396</ApplicationNumber>
<LabelerName>GeneYork Pharmaceuticals Group LLC</LabelerName>
<SubstanceName>METHYLPREDNISOLONE SODIUM SUCCINATE</SubstanceName>
<StrengthNumber>125</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210420</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>When oral therapy is not feasible, and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, the intravenous or intramuscular use of methylprednisolone sodium succinate for injection, USP is indicated as follows. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, perennial or seasonal allergic rhinitis, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond-Blackfan anemia), idiopathic thrombocytopenic purpura in adults (intravenous administration only; intramuscular administration is contraindicated), pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous System: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor, or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, temporal arteritis, polymyositis, and systemic lupus erythematosus.</IndicationAndUsage>
<Description>Methylprednisolone sodium succinate for injection, USP is an anti-inflammatory glucocorticoid, which contains methylprednisolone sodium succinate as the active ingredient. Methylprednisolone sodium succinate, USP, is the sodium succinate ester of methylprednisolone, and it occurs as a white, or nearly white, odorless hygroscopic, amorphous solid. It is very soluble in water and in alcohol; it is insoluble in chloroform and is very slightly soluble in acetone.The chemical name for methylprednisolone sodium succinate is pregna-1,4-diene-3,20-dione, 21-(3-carboxy-1-oxopropoxy)-11, 17-dihydroxy-6-methyl-monosodium salt, (6α, 11β), and the molecular weight is 496.53. The structural formula is represented below. Methylprednisolone sodium succinate is soluble in water; it may be administered in a small volume of diluent and is well suited for intravenous use in situations where high blood levels of methylprednisolone are required rapidly. Methylprednisolone sodium succinate for injection, USP is available in following strengths for intravenous or intramuscular administration. 40 mg (Single- Dose Vial) Each mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 40 mg methylprednisolone, also 1.6 mg monobasic sodium phosphate anhydrous; 17.46 mg dibasic sodium phosphate dried; and 25mg lactose hydrous. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative. 125 mg (Single- Dose Vial) Each 2 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 125 mg methylprednisolone; also 1.6 mg monobasic sodium phosphate anhydrous; and 17.4 mg dibasic sodium phosphate dried. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative. 500mg (Multi-Dose) Each 8 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 500 mg methylprednisolone; also 6.4 mg monobasic sodium phosphate anhydrous; 69.6 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. 1 gram (Multi-Dose) Each 16 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 1 gram methylprednisolone; also 12.8 mg monobasic sodium phosphate anhydrous; 139.2 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. 2 gram (Single- Dose Vial) Each 30.6 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 2 grams methylprednisolone; also 25.6 mg monobasic sodium phosphate anhydrous; 278 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. IMPORTANT – Use only Water for Injection or Bacteriostatic Water for Injection with Benzyl Alcohol when reconstituting methylprednisolone sodium succinate for injection, USP. Use within 48 hours after mixing. When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8 and the tonicities are, for the 40 mg per mL solution, 0.50 osmolar; for the 125 mg per 2 mL solution, 0.40 osmolar; for the 1gram per 8 mL solution, 0.44 osmolar; for the 2 gram per 30.6 mL solutions, 0.42 osmolar. (Isotonic saline=0.28 osmolar.).</Description>
</NDC>
<NDC>
<NDCCode>71329-304-01</NDCCode>
<PackageDescription>16 mL in 1 VIAL (71329-304-01) </PackageDescription>
<NDC11Code>71329-0304-01</NDC11Code>
<ProductNDC>71329-304</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methylprednisolone Sodium Succinate</ProprietaryName>
<NonProprietaryName>Methylprednisolone</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20210420</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212396</ApplicationNumber>
<LabelerName>GeneYork Pharmaceuticals Group LLC</LabelerName>
<SubstanceName>METHYLPREDNISOLONE SODIUM SUCCINATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/16mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210420</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>When oral therapy is not feasible, and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, the intravenous or intramuscular use of methylprednisolone sodium succinate for injection, USP is indicated as follows. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, perennial or seasonal allergic rhinitis, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond-Blackfan anemia), idiopathic thrombocytopenic purpura in adults (intravenous administration only; intramuscular administration is contraindicated), pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous System: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor, or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, temporal arteritis, polymyositis, and systemic lupus erythematosus.</IndicationAndUsage>
<Description>Methylprednisolone sodium succinate for injection, USP is an anti-inflammatory glucocorticoid, which contains methylprednisolone sodium succinate as the active ingredient. Methylprednisolone sodium succinate, USP, is the sodium succinate ester of methylprednisolone, and it occurs as a white, or nearly white, odorless hygroscopic, amorphous solid. It is very soluble in water and in alcohol; it is insoluble in chloroform and is very slightly soluble in acetone.The chemical name for methylprednisolone sodium succinate is pregna-1,4-diene-3,20-dione, 21-(3-carboxy-1-oxopropoxy)-11, 17-dihydroxy-6-methyl-monosodium salt, (6α, 11β), and the molecular weight is 496.53. The structural formula is represented below. Methylprednisolone sodium succinate is soluble in water; it may be administered in a small volume of diluent and is well suited for intravenous use in situations where high blood levels of methylprednisolone are required rapidly. Methylprednisolone sodium succinate for injection, USP is available in following strengths for intravenous or intramuscular administration. 40 mg (Single- Dose Vial) Each mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 40 mg methylprednisolone, also 1.6 mg monobasic sodium phosphate anhydrous; 17.46 mg dibasic sodium phosphate dried; and 25mg lactose hydrous. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative. 125 mg (Single- Dose Vial) Each 2 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 125 mg methylprednisolone; also 1.6 mg monobasic sodium phosphate anhydrous; and 17.4 mg dibasic sodium phosphate dried. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative. 500mg (Multi-Dose) Each 8 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 500 mg methylprednisolone; also 6.4 mg monobasic sodium phosphate anhydrous; 69.6 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. 1 gram (Multi-Dose) Each 16 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 1 gram methylprednisolone; also 12.8 mg monobasic sodium phosphate anhydrous; 139.2 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. 2 gram (Single- Dose Vial) Each 30.6 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 2 grams methylprednisolone; also 25.6 mg monobasic sodium phosphate anhydrous; 278 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. IMPORTANT – Use only Water for Injection or Bacteriostatic Water for Injection with Benzyl Alcohol when reconstituting methylprednisolone sodium succinate for injection, USP. Use within 48 hours after mixing. When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8 and the tonicities are, for the 40 mg per mL solution, 0.50 osmolar; for the 125 mg per 2 mL solution, 0.40 osmolar; for the 1gram per 8 mL solution, 0.44 osmolar; for the 2 gram per 30.6 mL solutions, 0.42 osmolar. (Isotonic saline=0.28 osmolar.).</Description>
</NDC>
<NDC>
<NDCCode>71329-305-01</NDCCode>
<PackageDescription>30.6 mL in 1 VIAL (71329-305-01) </PackageDescription>
<NDC11Code>71329-0305-01</NDC11Code>
<ProductNDC>71329-305</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methylprednisolone Sodium Succinate</ProprietaryName>
<NonProprietaryName>Methylprednisolone</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20210420</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212396</ApplicationNumber>
<LabelerName>GeneYork Pharmaceuticals Group LLC</LabelerName>
<SubstanceName>METHYLPREDNISOLONE SODIUM SUCCINATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/30.6mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210420</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>When oral therapy is not feasible, and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, the intravenous or intramuscular use of methylprednisolone sodium succinate for injection, USP is indicated as follows. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, perennial or seasonal allergic rhinitis, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond-Blackfan anemia), idiopathic thrombocytopenic purpura in adults (intravenous administration only; intramuscular administration is contraindicated), pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous System: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor, or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, temporal arteritis, polymyositis, and systemic lupus erythematosus.</IndicationAndUsage>
<Description>Methylprednisolone sodium succinate for injection, USP is an anti-inflammatory glucocorticoid, which contains methylprednisolone sodium succinate as the active ingredient. Methylprednisolone sodium succinate, USP, is the sodium succinate ester of methylprednisolone, and it occurs as a white, or nearly white, odorless hygroscopic, amorphous solid. It is very soluble in water and in alcohol; it is insoluble in chloroform and is very slightly soluble in acetone.The chemical name for methylprednisolone sodium succinate is pregna-1,4-diene-3,20-dione, 21-(3-carboxy-1-oxopropoxy)-11, 17-dihydroxy-6-methyl-monosodium salt, (6α, 11β), and the molecular weight is 496.53. The structural formula is represented below. Methylprednisolone sodium succinate is soluble in water; it may be administered in a small volume of diluent and is well suited for intravenous use in situations where high blood levels of methylprednisolone are required rapidly. Methylprednisolone sodium succinate for injection, USP is available in following strengths for intravenous or intramuscular administration. 40 mg (Single- Dose Vial) Each mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 40 mg methylprednisolone, also 1.6 mg monobasic sodium phosphate anhydrous; 17.46 mg dibasic sodium phosphate dried; and 25mg lactose hydrous. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative. 125 mg (Single- Dose Vial) Each 2 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 125 mg methylprednisolone; also 1.6 mg monobasic sodium phosphate anhydrous; and 17.4 mg dibasic sodium phosphate dried. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative. 500mg (Multi-Dose) Each 8 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 500 mg methylprednisolone; also 6.4 mg monobasic sodium phosphate anhydrous; 69.6 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. 1 gram (Multi-Dose) Each 16 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 1 gram methylprednisolone; also 12.8 mg monobasic sodium phosphate anhydrous; 139.2 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. 2 gram (Single- Dose Vial) Each 30.6 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 2 grams methylprednisolone; also 25.6 mg monobasic sodium phosphate anhydrous; 278 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. IMPORTANT – Use only Water for Injection or Bacteriostatic Water for Injection with Benzyl Alcohol when reconstituting methylprednisolone sodium succinate for injection, USP. Use within 48 hours after mixing. When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8 and the tonicities are, for the 40 mg per mL solution, 0.50 osmolar; for the 125 mg per 2 mL solution, 0.40 osmolar; for the 1gram per 8 mL solution, 0.44 osmolar; for the 2 gram per 30.6 mL solutions, 0.42 osmolar. (Isotonic saline=0.28 osmolar.).</Description>
</NDC>
<NDC>
<NDCCode>11084-303-01</NDCCode>
<PackageDescription>47 mL in 1 BOTTLE, PUMP (11084-303-01) </PackageDescription>
<NDC11Code>11084-0303-01</NDC11Code>
<ProductNDC>11084-303</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Instantfoam Complete Pure</ProprietaryName>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20191001</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>505G(a)(3)</ApplicationNumber>
<LabelerName>SC Johnson Professional USA Inc.</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191001</StartMarketingDatePackage>
<EndMarketingDatePackage>20241231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>to decrease bacteria on the skin that could cause disease. recommended for repeated use.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>11319-303-01</NDCCode>
<PackageDescription>25 kg in 1 DRUM (11319-303-01) </PackageDescription>
<NDC11Code>11319-0303-01</NDC11Code>
<ProductNDC>11319-303</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Camphor Powder Synthetic</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20190101</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Ungerer And Company</LabelerName>
<SubstanceName>CAMPHOR (SYNTHETIC)</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>01-JAN-19</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>13537-303-02</NDCCode>
<PackageDescription>1 TUBE in 1 BOX (13537-303-02) > 4 g in 1 TUBE (13537-303-01)</PackageDescription>
<NDC11Code>13537-0303-02</NDC11Code>
<ProductNDC>13537-303</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Esika</ProprietaryName>
<ProprietaryNameSuffix>Extreme Moisturizing Spf 16</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate And Oxybenzone</NonProprietaryName>
<DosageFormName>LIPSTICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20110517</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Ventura Corporation (San Juan, P.R)</LabelerName>
<SubstanceName>OCTINOXATE; OXYBENZONE</SubstanceName>
<StrengthNumber>.0664; .0151</StrengthNumber>
<StrengthUnit>g/g; g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Helps prevent sunburn.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>14141-303-01</NDCCode>
<PackageDescription>1 CASE in 1 BOX (14141-303-01) / 10 g in 1 CASE</PackageDescription>
<NDC11Code>14141-0303-01</NDC11Code>
<ProductNDC>14141-303</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Lbel Forever Stay Polvos Compactos De Larga Duracion Fps 15 Long Lasting Compact Spf 15 Solei 200</ProprietaryName>
<NonProprietaryName>Titanium Dioxide, Zinc Oxide</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20220803</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>BEL STAR S A</LabelerName>
<SubstanceName>TITANIUM DIOXIDE; ZINC OXIDE</SubstanceName>
<StrengthNumber>57.5; 49</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-12-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220803</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Helps prevent sunburn.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>16729-303-01</NDCCode>
<PackageDescription>100 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (16729-303-01) </PackageDescription>
<NDC11Code>16729-0303-01</NDC11Code>
<ProductNDC>16729-303</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diltiazem Hydrochloride</ProprietaryName>
<NonProprietaryName>Diltiazem Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200911</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206997</ApplicationNumber>
<LabelerName>Accord Healthcare, Inc.</LabelerName>
<SubstanceName>DILTIAZEM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>120</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200911</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diltiazem Hydrochloride Extended-release Capsules, USP are indicated for the treatment of hypertension. Diltiazem hydrochloride may be used alone or in combination with other antihypertensive medications, such as diuretics. Diltiazem Hydrochloride Extended-release Capsules, USP are indicated for the management of chronic stable angina.</IndicationAndUsage>
<Description>Diltiazem hydrochloride is a calcium ion influx inhibitor (slow channel blocker or calcium antagonist). Chemically, diltiazem hydrochloride is 1,5-Benzothiazepin-4(5 H)one, 3-(acetyloxy)-5-[2-(dimethylamino)ethyl]-2,3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride, (+)-cis-. Its molecular formula is C 22H 26N 2O 4SHCl and its molecular weight is 450.98. Its structural formula is as follows:. Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. FDA approved dissolution specification differ from the USP dissolution specification. Diltiazem Hydrochloride Extended-release Capsules, USP contain multiple units of diltiazem HCl extended-release 60 mg, resulting in 120 mg, 180 mg, or 240 mg dosage strengths allowing for the controlled release of diltiazem HCl over a 24-hour period. Inactive Ingredients:Diltiazem Hydrochloride Extended-release Capsules, USP also contain colloidal anhydrous silica, hydroxypropyl methyl cellulose, mannitol and magnesium stearate. The 120 mg capsule shell contains gelatin, titanium dioxide, sodium lauryl sulfate, FD &C Yellow 6, D &C Yellow 10. The 180 mg capsule shell contains gelatin, titanium dioxide, sodium lauryl sulfate, D &C Yellow 10, D &C Red 28, FD &C Red 40. The 240 mg capsule shell contains gelatin, titanium dioxide, sodium lauryl sulfate, iron oxide black, iron oxide red, iron oxide yellow. The imprinting ink of the tablet consists of shellac, iron oxide black and potassium hydroxide. For oral administration.</Description>
</NDC>
<NDC>
<NDCCode>27808-303-01</NDCCode>
<PackageDescription>100 TABLET, EXTENDED RELEASE in 1 BOTTLE (27808-303-01) </PackageDescription>
<NDC11Code>27808-0303-01</NDC11Code>
<ProductNDC>27808-303</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoprolol Succinate</ProprietaryName>
<NonProprietaryName>Metoprolol Succinate</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207206</ApplicationNumber>
<LabelerName>Cranbury Pharmaceuticals, LLC</LabelerName>
<SubstanceName>METOPROLOL SUCCINATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Metoprolol succinate, USP, is a beta1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended-release tablets. Metoprolol succinate extended-release tablets, USP have been formulated to provide a controlled and predictable release of metoprolol for once-daily administration. The tablets comprise a multiple unit system containing metoprolol succinate in a multitude of controlled release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The tablets contain 23.75, 47.5, 95 and 190 mg of metoprolol succinate, USP equivalent to 25, 50, 100 and 200 mg of metoprolol tartrate, USP, respectively. Its chemical name is (±)1- (isopropyl amino)-3-[p-(2-methoxyethyl) phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is. Metoprolol succinate, USP is a white crystalline powder with a molecular weight of 652.8. It is freely soluble in water; soluble in methanol; sparingly soluble in ethanol; slightly soluble in dichloromethane and 2-propanol; practically insoluble in ethyl acetate, acetone, diethyl ether, and heptane. Inactive ingredients: ethylcellulose, hypromellose type 2208, hypromellose type 2910, lecithin, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, talc, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>27854-303-01</NDCCode>
<PackageDescription>40 PACKET in 1 BOX (27854-303-01) / 1 TABLET in 1 PACKET</PackageDescription>
<NDC11Code>27854-0303-01</NDC11Code>
<ProductNDC>27854-303</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sedalmex Forte</ProprietaryName>
<NonProprietaryName>Acetaminophen, Aspirin, Caffeine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240601</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M013</ApplicationNumber>
<LabelerName>Belmora LLC</LabelerName>
<SubstanceName>ACETAMINOPHEN; ASPIRIN; CAFFEINE</SubstanceName>
<StrengthNumber>250; 250; 65</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Cyclooxygenase Inhibitors [MoA], Decreased Platelet Aggregation [PE], Decreased Prostaglandin Production [PE], Methylxanthine [EPC], Nonsteroidal Anti-inflammatory Drug [EPC], Platelet Aggregation Inhibitor [EPC], Xanthines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves minor aches and pains due to. headache muscular aches arthritis pain. a cold toothache premenstrual and menstrual cramps.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>35356-303-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE, PLASTIC (35356-303-01)</PackageDescription>
<NDC11Code>35356-0303-01</NDC11Code>
<ProductNDC>35356-303</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prandin</ProprietaryName>
<NonProprietaryName>Repaglinide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101012</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020741</ApplicationNumber>
<LabelerName>Lake Erie Medical DBA Quality Care Products LLC</LabelerName>
<SubstanceName>REPAGLINIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Glinide [EPC],Potassium Channel Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-01-08</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>41250-303-01</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (41250-303-01) > 10 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>41250-0303-01</NDC11Code>
<ProductNDC>41250-303</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Itchy Eye</ProprietaryName>
<NonProprietaryName>Ketotifen Fumarate</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20160126</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077958</ApplicationNumber>
<LabelerName>Meijer Distribution Inc</LabelerName>
<SubstanceName>KETOTIFEN FUMARATE</SubstanceName>
<StrengthNumber>.35</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160126</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Temporarily relieves itchy eyes due to pollen, ragweed, grass, animal hair and dander.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>42571-303-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (42571-303-01) </PackageDescription>
<NDC11Code>42571-0303-01</NDC11Code>
<ProductNDC>42571-303</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Chlordiazepoxide And Amitriptyline Hydrochloride</ProprietaryName>
<NonProprietaryName>Chlordiazepoxide And Amitriptyline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220401</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211925</ApplicationNumber>
<LabelerName>Micro Labs Limited</LabelerName>
<SubstanceName>AMITRIPTYLINE HYDROCHLORIDE; CHLORDIAZEPOXIDE</SubstanceName>
<StrengthNumber>10; 25</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS], Tricyclic Antidepressant [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-08-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Chlordiazepoxide and amitriptyline hydrochloride tablets are indicated for the treatment of patients with moderate to severe depression associated with moderate to severe anxiety. The therapeutic response to chlordiazepoxide and amitriptyline hydrochloride tablet occurs earlier and with fewer treatment failures than when either amitriptyline or chlordiazepoxide is used alone. Symptoms likely to respond in the first week of treatment include: insomnia, feelings of guilt or worthlessness, agitation, psychic and somatic anxiety, suicidal ideation and anorexia.</IndicationAndUsage>
<Description>Chlordiazepoxide and amitriptyline hydrochloride tablets, USP combine for oral administration, chlordiazepoxide, an agent for the relief of anxiety and tension, and amitriptyline, an antidepressant. It is available in as white, round, biconvex film-coated tablets debossed 'CA2'on one side and the other side is plain, each containing 10 mg chlordiazepoxide and 25 mg amitriptyline (as the hydrochloride salt); and in green, round, biconvex, film-coated tablets debossed 'CA1 'on one side and the other side is plain, each containing 5 mg chlordiazepoxide and 12.5 mg amitriptyline (as the hydrochloride salt). Each tablet also contains hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, silicon dioxide, sodium starch glycolate, talc and titanium dioxide. In addition, the 10 mg/25 mg tablet contains polyethylene glycol 400 and 5 mg/12.5 mg tablet contains D&C YELLOW NO.10, FD&C BLUE NO.1, FD & C YELLOW NO. 6 and polyethylene glycol 6000. Chlordiazepoxide USP is a benzodiazepine with the formula 7-chloro-2-(methyl-amino)-5-phenyl- 3H-1,4-benzodiazepine 4-oxide. It is a slightly yellow crystalline material and is insoluble in water. The molecular weight is 299.76. Amitriptyline Hydrochloride USP is a dibenzocycloheptadiene derivative. The formula is 10,11-dihydro- N,N-dimethyl-5H-dibenzo [a,d] cycloheptene-Δ 5,γ-propylamine hydrochloride. It is a white or practically white crystalline compound that is freely soluble in water. The molecular weight is 313.87.</Description>
</NDC>
<NDC>
<NDCCode>42677-303-01</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (42677-303-01) </PackageDescription>
<NDC11Code>42677-0303-01</NDC11Code>
<ProductNDC>42677-303</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rosuvastatin Calcium</ProprietaryName>
<NonProprietaryName>Rosuvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260417</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207375</ApplicationNumber>
<LabelerName>Shandong New Time Pharmaceutical Co., Ltd.</LabelerName>
<SubstanceName>ROSUVASTATIN CALCIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260417</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rosuvastatin tablets are indicated: 1 To reduce the risk of major adverse cardiovascular (CV) events (CV death, nonfatal myocardial infarction, nonfatal stroke, or an arterial revascularization procedure) in adults without established coronary heart disease who are at increased risk of CV disease based on age, high-sensitivity C-reactive protein (hsCRP) ≥2 mg/L, and at least one additional CV risk factor., 2 As an adjunct to diet to: Reduce low-density lipoprotein cholesterol (LDL-C) in adults with primary hyperlipidemia.Reduce low-density lipoprotein cholesterol (LDL-C) and slow the progression of atherosclerosis in adults.Reduce LDL-C in adults and pediatric patients aged 8 years and older with heterozygous familial hypercholesterolemia (HeFH)., 3 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 7 years and older with homozygous familial hypercholesterolemia (HoFH)., 4 As an adjunct to diet for the treatment of adults with: Primary dysbetalipoproteinemia.Hypertriglyceridemia.</IndicationAndUsage>
<Description>Rosuvastatin calcium, USP is a 3-hydroxy-3-methylglutaryl coenzyme A (HMG CoA)-reductase inhibitor. The chemical name for rosuvastatin calcium is bis[(E)-7-[4-(4-fluorophenyl)-6-isopropyl-2[methyl(methylsulfonyl)amino] pyrimidin-5-yl](3R,5S)-3,5-dihydroxyhept-6-enoic acid] calcium salt with the following structural formula. The empirical formula for rosuvastatin calcium, USP is (C 22H 27FN 3O 6S) 2Ca and the molecular weight is 1,001.14. Rosuvastatin calcium is a white amorphous powder that is sparingly soluble in water and methanol, and slightly soluble in ethanol. Rosuvastatin calcium is a hydrophilic compound with a partition coefficient (octanol/water) of 0.13 at pH of 7.0. Rosuvastatin tablets, USP for oral use contain rosuvastatin 5 mg, 10 mg, 20 mg, or 40 mg (equivalent to 5.2 mg, 10.4 mg, 20.8 mg, and 41.6 mg rosuvastatin calcium) and the following inactive ingredients: Each tablet contains: mannitol, meglumine, hypromellose, microcrystalline cellulose, crospovidone, magnesium stearate, HPMC 2910/hypromellose, titanium dioxide, lactose monohydrate, macrogol, triacetin and iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>42858-303-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE, PLASTIC (42858-303-01) </PackageDescription>
<NDC11Code>42858-0303-01</NDC11Code>
<ProductNDC>42858-303</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydromorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091123</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA019892</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals LLC</LabelerName>
<SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20091123</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydromorphone hydrochloride oral solution and hydromorphone hydrochloride tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.</IndicationAndUsage>
<Description>Hydromorphone hydrochloride, a hydrogenated ketone of morphine, is an opioid agonist. Hydromorphone hydrochloride tablets are supplied in 2 mg, 4 mg, and 8 mg tablets for oral administration. The tablet strengths describe the amount of hydromorphone hydrochloride in each tablet. Hydromorphone hydrochloride oral solution is supplied as 5 mg/5 mL (1 mg/mL) viscous liquid. The chemical name is 4,5α-epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The molecular weight is 321.80. Its molecular formula is C17H19NO3∙HCl, and it has the following chemical structure. Hydromorphone hydrochloride is a white or almost white crystalline powder that is freely soluble in water, very slightly soluble in ethanol (96%), and practically insoluble in methylene chloride. The 2 mg, 4 mg, and 8 mg tablets contain the following inactive ingredients: lactose anhydrous and magnesium stearate. Hydromorphone hydrochloride tablets may also contain traces of sodium metabisulfite. The 2 mg tablets also contain D&C red #30 Lake dye and D&C yellow #10 Lake dye. The 4 mg tablets also contain D&C yellow #10 Lake dye. Each 5 mL (1 teaspoon) of hydromorphone hydrochloride oral solution contains 5 mg of hydromorphone hydrochloride. The inactive ingredients are purified water, methylparaben, propylparaben, sucrose, and glycerin. Hydromorphone hydrochloride oral solution may contain traces of sodium metabisulfite.</Description>
</NDC>
<NDC>
<NDCCode>42865-303-01</NDCCode>
<PackageDescription>12 CAPSULE, DELAYED RELEASE in 1 BOTTLE, PLASTIC (42865-303-01) </PackageDescription>
<NDC11Code>42865-0303-01</NDC11Code>
<ProductNDC>42865-303</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zenpep</ProprietaryName>
<NonProprietaryName>Pancrelipase</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090922</StartMarketingDate>
<EndMarketingDate>20200131</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022210</ApplicationNumber>
<LabelerName>Allergan, Inc.</LabelerName>
<SubstanceName>PANCRELIPASE LIPASE; PANCRELIPASE PROTEASE; PANCRELIPASE AMYLASE</SubstanceName>
<StrengthNumber>20000; 68000; 109000</StrengthNumber>
<StrengthUnit>[USP'U]/1; [USP'U]/1; [USP'U]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-02-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20090922</StartMarketingDatePackage>
<EndMarketingDatePackage>20200131</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>42998-303-01</NDCCode>
<PackageDescription>5 mL in 1 VIAL, GLASS (42998-303-01)</PackageDescription>
<NDC11Code>42998-0303-01</NDC11Code>
<ProductNDC>42998-303</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amytal Sodium</ProprietaryName>
<NonProprietaryName>Amobarbital Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20080925</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Marathon Pharmaceuticals, LLC</LabelerName>
<SubstanceName>AMOBARBITAL SODIUM</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>g/5mL</StrengthUnit>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>43473-303-01</NDCCode>
<PackageDescription>59.1 mL in 1 BOTTLE (43473-303-01) </PackageDescription>
<NDC11Code>43473-0303-01</NDC11Code>
<ProductNDC>43473-303</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Lightning X Antiseptic</ProprietaryName>
<NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20240108</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M003</ApplicationNumber>
<LabelerName>Nantong Health & Beyond Hygienic Products Inc.</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>1.3</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-01-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240108</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>44827-303-01</NDCCode>
<PackageDescription>5 AMPULE in 1 BOX (44827-303-01) > 1 mL in 1 AMPULE</PackageDescription>
<NDC11Code>44827-0303-01</NDC11Code>
<ProductNDC>44827-303</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dehydrated Alcohol</ProprietaryName>
<NonProprietaryName>Dehydrated Alcohol Injection</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRASPINAL</RouteName>
<StartMarketingDate>19900930</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Valesco Pharmaceuticals</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>.98</StrengthNumber>
<StrengthUnit>mL/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Dehydrated Alcohol Injection is indicated for therapeutic neurolysis of nerves or ganglia for the relief of intractable chronic pain in such conditions as inoperable cancer and trigeminal neuralgia (ticdouloureux), in patients for whom neurosurgical procedures are contraindicated. Relief of trigeminal neuralgia usually is only temporary. Other conditions for which injection of alcohol has been reported include glossopharyngeal neuralgia, angina pectoris and severe claudication due to peripheral vascular insufficiency. Alcohol concentrations of 40 to 50% (prepared by appropriate dilution of dehydrated alcohol) have been used for epidural or individual motor nerve injections to control certain manifestations of cerebral palsy and spastic paraplegia. Similar concentrations also have been injected for celiac plexus block to relieve pain of inoperable upper abdominal cancer, and have been injected intra-and subcutaneously for relief of intractable pruritus ani.</IndicationAndUsage>
<Description>Dehydrated Alcohol Injection, USP consists of not less than 98% by volume of ethanol (ethyl alcohol). Dehydrated alcohol is hypobaric in relation to the cerebrospinal fluid. It is injected proximate to nerve tissues and into spinal subarachnoid spaces to produce degeneration of nerve function (neurolysis) for control of chronic pain. The product contains no bacteriostat or antimicrobial agent (other than ethanol) and no added buffer. Dehydrated alcohol is a clear, colorless liquid miscible with water and has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>47426-303-01</NDCCode>
<PackageDescription>1 CARTON in 1 KIT (47426-303-01) / 1 VIAL, SINGLE-DOSE in 1 CARTON (47426-303-03) / 7 mL in 1 VIAL, SINGLE-DOSE (47426-303-05) </PackageDescription>
<NDC11Code>47426-0303-01</NDC11Code>
<ProductNDC>47426-303</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zynrelef</ProprietaryName>
<NonProprietaryName>Bupivacaine And Meloxicam</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INFILTRATION</RouteName>
<StartMarketingDate>20210701</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA211988</ApplicationNumber>
<LabelerName>Heron Therapeutics, Inc.</LabelerName>
<SubstanceName>BUPIVACAINE; MELOXICAM</SubstanceName>
<StrengthNumber>200; 6</StrengthNumber>
<StrengthUnit>mg/7mL; mg/7mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Local Anesthesia [PE], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZYNRELEF is indicated in adults for postsurgical analgesia for up to 72 hours after: 1 soft tissue surgical procedures, 2 orthopedic surgical procedures–foot and ankle procedures–other orthopedic surgical procedures (e.g., total joint arthroplasty) in which direct exposure to articular cartilage is avoided [see Warnings and Precautions (5.10)].</IndicationAndUsage>
<Description>ZYNRELEF (bupivacaine and meloxicam) extended-release solution, for soft tissue or periarticular instillation use, contains bupivacaine, an amide local anesthetic, and meloxicam, a nonsteroidal anti-inflammatory drug (NSAID).</Description>
</NDC>
<NDC>
<NDCCode>47781-303-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (47781-303-01) </PackageDescription>
<NDC11Code>47781-0303-01</NDC11Code>
<ProductNDC>47781-303</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nitrofurantoin Monohydrate/ Macrocrystalline</ProprietaryName>
<NonProprietaryName>Nitrofurantoin Monohydrate/macrocrystalline</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110525</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020064</ApplicationNumber>
<LabelerName>Alvogen Inc.</LabelerName>
<SubstanceName>NITROFURANTOIN; NITROFURANTOIN MONOHYDRATE</SubstanceName>
<StrengthNumber>25; 75</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Nitrofuran Antibacterial [EPC], Nitrofuran Antibacterial [EPC], Nitrofurans [CS], Nitrofurans [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110525</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nitrofurantoin capsules (monohydrate/macrocrystals) are indicated only for the treatment of acute uncomplicated urinary tract infections (acute cystitis) caused by susceptible strains of Escherichia coli or Staphylococcus saprophyticus. Nitrofurantoin is not indicated for the treatment of pyelonephritis or perinephric abscesses. To reduce the development of drug-resistant bacteria and maintain the effectiveness of nitrofurantoin capsules (monohydrate/macrocrystals) and other antibacterial drugs, nitrofurantoin capsules (monohydrate/macrocrystals) should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Nitrofurantoins lack the broader tissue distribution of other therapeutic agents approved for urinary tract infections. Consequently, many patients who are treated with nitrofurantoin capsules (monohydrate/macrocrystals) are predisposed to persistence or reappearance of bacteriuria. (See CLINICAL STUDIES.) Urine specimens for culture and susceptibility testing should be obtained before and after completion of therapy. If persistence or reappearance of bacteriuria occurs after treatment with nitrofurantoin capsules (monohydrate/macrocrystals), other therapeutic agents with broader tissue distribution should be selected. In considering the use of nitrofurantoin capsules (monohydrate/macrocrystals) lower eradication rates should be balanced against the increased potential for systemic toxicity and for the development of antimicrobial resistance when agents with broader tissue distribution are utilized.</IndicationAndUsage>
<Description>Nitrofurantoin is an antibacterial agent specific for urinary tract infections. Nitrofurantoin capsules, USP (monohydrate/macrocrystals) is a hard gelatin capsule. Each capsule contains 100 mg of nitrofurantoin in the form of 25 mg of nitrofurantoin macrocrystals and 75 mg of nitrofurantoin monohydrate. The chemical name of nitrofurantoin macrocrystals is 1-[[[5-nitro-2-furanyl]methylene] amino]-2,4-imidazolidinedione. The chemical structure is the following. Molecular Weight: 238.16. The chemical name of nitrofurantoin monohydrate is 1-[[[5-nitro-2-furanyl]methylene] amino]-2,4- imidazolidinedione monohydrate. The chemical structure is the following. Molecular Weight: 256.17. Inactive Ingredients: Each capsule contains carbomer 934P, corn starch, compressible sugar, D&C Yellow No. 10, edible gray ink, FD&C Blue No. 1, FD&C Red No. 40, gelatin, lactose, magnesium stearate, povidone, talc, and titanium dioxide. Meets USP Dissolution Test 8.</Description>
</NDC>
<NDC>
<NDCCode>47993-303-01</NDCCode>
<PackageDescription>20 mL in 1 BOTTLE (47993-303-01) </PackageDescription>
<NDC11Code>47993-0303-01</NDC11Code>
<ProductNDC>47993-303</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Antibacterial Hand Sanitizerspray</ProprietaryName>
<NonProprietaryName>Ethyl Alcohol</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200724</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>NINGBO JIANGBEI OCEAN STAR TRADING CO.,LTD</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>62</StrengthNumber>
<StrengthUnit>g/112mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200724</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses：. For hand sanitizing to reduce bacteria on the skin.</IndicationAndUsage>
</NDC>
</NDCList>