RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>71335-0075-7</NDCCode>
    <PackageDescription>120 TABLET in 1 BOTTLE (71335-0075-7) </PackageDescription>
    <NDC11Code>71335-0075-07</NDC11Code>
    <ProductNDC>71335-0075</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lisinopril</ProprietaryName>
    <NonProprietaryName>Lisinopril</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20111101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076164</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>LISINOPRIL</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220315</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lisinopril is an angiotensin converting enzyme (ACE) inhibitor indicated for: 1 Treatment of hypertension in adults and pediatric patients 6 years of age and older (1.1), 2 Adjunct therapy for heart failure (1.2), 3 Treatment of Acute Myocardial Infarction (1.3).</IndicationAndUsage>
    <Description>Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O52H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets, USP, are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate and magnesium stearate. 5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and yellow ferric oxide. 10 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and red ferric oxide. 20 and 30 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and red ferric oxide. 40 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and yellow ferric oxide. *: Pregelatinized starch is a physically modified corn (maize) starch.</Description>
  </NDC>
  <NDC>
    <NDCCode>0310-0075-95</NDCCode>
    <PackageDescription>7 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (0310-0075-95) </PackageDescription>
    <NDC11Code>00310-0075-95</NDC11Code>
    <ProductNDC>0310-0075</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Etcamah</ProprietaryName>
    <NonProprietaryName>Camizestrant</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20260904</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA220359</ApplicationNumber>
    <LabelerName>AstraZeneca Pharmaceuticals LP</LabelerName>
    <SubstanceName>CAMIZESTRANT</SubstanceName>
    <StrengthNumber>75</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2026-09-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260904</StartMarketingDatePackage>
    <SamplePackage>Y</SamplePackage>
    <IndicationAndUsage>ETCAMAH in combination with a CDK4/6 inhibitor (abemaciclib, palbociclib, or ribociclib) is indicated for the treatment of adult patients with hormone receptor (HR)-positive, human epidermal growth factor receptor 2 (HER2)-negative, locally advanced or metastatic breast cancer upon detection of ESR1 mutation during aromatase inhibitor and CDK4/6 inhibitor therapy, based on an FDA-authorized test [see Dosage and Administration (2.1)]. This indication is approved under accelerated approval based on progression-free survival as measured from detection of ESR1 mutation [see Clinical Studies (14)]. Continued approval for this indication may be contingent upon verification and description of clinical benefit in a confirmatory trial(s).</IndicationAndUsage>
    <Description>ETCAMAH tablets contain camizestrant, an estrogen receptor antagonist for oral use. The chemical name is N-[1-(3-fluoropropyl)-3-azetidinyl]-6-[(6S,8R)-8-methyl-7-(2,2,2-trifluoroethyl)-6,7,8,9-tetrahydro-3H-pyrazolo[4,3-f]isoquinolin-6-yl]-3-pyridinamine. Camizestrant is white to brown powder. The molecular formula for camizestrant is C24H28F4N6 and the molecular weight is 476.51 g/mol. The chemical structure for camizestrant is shown below. Each ETCAMAH tablet contains 75 mg camizestrant and the following inactive ingredients: anhydrous dibasic calcium phosphate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The tablet film-coating consists of ferric oxide red, ferric oxide yellow, ferrosoferric oxide, polyethylene glycol 3350, polyvinyl alcohol, talc and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>54569-0075-7</NDCCode>
    <PackageDescription>6 TABLET in 1 BOTTLE, PLASTIC (54569-0075-7)</PackageDescription>
    <NDC11Code>54569-0075-07</NDC11Code>
    <ProductNDC>54569-0075</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sulfamethoxazole And Trimethoprim</ProprietaryName>
    <NonProprietaryName>Sulfamethoxazole And Trimethoprim</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20070125</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078060</ApplicationNumber>
    <LabelerName>A-S Medication Solutions LLC</LabelerName>
    <SubstanceName>SULFAMETHOXAZOLE; TRIMETHOPRIM</SubstanceName>
    <StrengthNumber>800; 160</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Sulfonamide Antimicrobial [EPC],Sulfonamides [Chemical/Ingredient],Cytochrome P450 2C9 Inhibitors [MoA],Dihydrofolate Reductase Inhibitor Antibacterial [EPC],Dihydrofolate Reductase Inhibitors [MoA],Cytochrome P450 2C8 Inhibitors [MoA],Organic Cation Transporter 2 Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-01-10</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>65085-0075-7</NDCCode>
    <PackageDescription>10 kg in 1 DRUM (65085-0075-7) </PackageDescription>
    <NDC11Code>65085-0075-07</NDC11Code>
    <ProductNDC>65085-0075</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Mecamylamine Hydrochloride</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20220803</StartMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
    <LabelerName>Piramal Pharma Limited</LabelerName>
    <SubstanceName>MECAMYLAMINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>kg/kg</StrengthUnit>
    <Status>Unfinished</Status>
    <LastUpdate>2022-08-05</LastUpdate>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>03-AUG-22</StartMarketingDatePackage>
  </NDC>
  <NDC>
    <NDCCode>71335-0075-1</NDCCode>
    <PackageDescription>30 TABLET in 1 BOTTLE (71335-0075-1) </PackageDescription>
    <NDC11Code>71335-0075-01</NDC11Code>
    <ProductNDC>71335-0075</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lisinopril</ProprietaryName>
    <NonProprietaryName>Lisinopril</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20111101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076164</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>LISINOPRIL</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220315</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lisinopril is an angiotensin converting enzyme (ACE) inhibitor indicated for: 1 Treatment of hypertension in adults and pediatric patients 6 years of age and older (1.1), 2 Adjunct therapy for heart failure (1.2), 3 Treatment of Acute Myocardial Infarction (1.3).</IndicationAndUsage>
    <Description>Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O52H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets, USP, are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate and magnesium stearate. 5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and yellow ferric oxide. 10 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and red ferric oxide. 20 and 30 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and red ferric oxide. 40 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and yellow ferric oxide. *: Pregelatinized starch is a physically modified corn (maize) starch.</Description>
  </NDC>
  <NDC>
    <NDCCode>71335-0075-2</NDCCode>
    <PackageDescription>100 TABLET in 1 BOTTLE (71335-0075-2) </PackageDescription>
    <NDC11Code>71335-0075-02</NDC11Code>
    <ProductNDC>71335-0075</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lisinopril</ProprietaryName>
    <NonProprietaryName>Lisinopril</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20111101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076164</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>LISINOPRIL</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220315</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lisinopril is an angiotensin converting enzyme (ACE) inhibitor indicated for: 1 Treatment of hypertension in adults and pediatric patients 6 years of age and older (1.1), 2 Adjunct therapy for heart failure (1.2), 3 Treatment of Acute Myocardial Infarction (1.3).</IndicationAndUsage>
    <Description>Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O52H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets, USP, are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate and magnesium stearate. 5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and yellow ferric oxide. 10 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and red ferric oxide. 20 and 30 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and red ferric oxide. 40 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and yellow ferric oxide. *: Pregelatinized starch is a physically modified corn (maize) starch.</Description>
  </NDC>
  <NDC>
    <NDCCode>71335-0075-3</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE (71335-0075-3) </PackageDescription>
    <NDC11Code>71335-0075-03</NDC11Code>
    <ProductNDC>71335-0075</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lisinopril</ProprietaryName>
    <NonProprietaryName>Lisinopril</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20111101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076164</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>LISINOPRIL</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220315</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lisinopril is an angiotensin converting enzyme (ACE) inhibitor indicated for: 1 Treatment of hypertension in adults and pediatric patients 6 years of age and older (1.1), 2 Adjunct therapy for heart failure (1.2), 3 Treatment of Acute Myocardial Infarction (1.3).</IndicationAndUsage>
    <Description>Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O52H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets, USP, are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate and magnesium stearate. 5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and yellow ferric oxide. 10 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and red ferric oxide. 20 and 30 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and red ferric oxide. 40 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and yellow ferric oxide. *: Pregelatinized starch is a physically modified corn (maize) starch.</Description>
  </NDC>
  <NDC>
    <NDCCode>71335-0075-4</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (71335-0075-4) </PackageDescription>
    <NDC11Code>71335-0075-04</NDC11Code>
    <ProductNDC>71335-0075</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lisinopril</ProprietaryName>
    <NonProprietaryName>Lisinopril</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20111101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076164</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>LISINOPRIL</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220315</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lisinopril is an angiotensin converting enzyme (ACE) inhibitor indicated for: 1 Treatment of hypertension in adults and pediatric patients 6 years of age and older (1.1), 2 Adjunct therapy for heart failure (1.2), 3 Treatment of Acute Myocardial Infarction (1.3).</IndicationAndUsage>
    <Description>Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O52H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets, USP, are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate and magnesium stearate. 5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and yellow ferric oxide. 10 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and red ferric oxide. 20 and 30 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and red ferric oxide. 40 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and yellow ferric oxide. *: Pregelatinized starch is a physically modified corn (maize) starch.</Description>
  </NDC>
  <NDC>
    <NDCCode>71335-0075-5</NDCCode>
    <PackageDescription>180 TABLET in 1 BOTTLE (71335-0075-5) </PackageDescription>
    <NDC11Code>71335-0075-05</NDC11Code>
    <ProductNDC>71335-0075</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lisinopril</ProprietaryName>
    <NonProprietaryName>Lisinopril</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20111101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076164</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>LISINOPRIL</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220315</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lisinopril is an angiotensin converting enzyme (ACE) inhibitor indicated for: 1 Treatment of hypertension in adults and pediatric patients 6 years of age and older (1.1), 2 Adjunct therapy for heart failure (1.2), 3 Treatment of Acute Myocardial Infarction (1.3).</IndicationAndUsage>
    <Description>Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O52H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets, USP, are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate and magnesium stearate. 5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and yellow ferric oxide. 10 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and red ferric oxide. 20 and 30 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and red ferric oxide. 40 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and yellow ferric oxide. *: Pregelatinized starch is a physically modified corn (maize) starch.</Description>
  </NDC>
  <NDC>
    <NDCCode>71335-0075-6</NDCCode>
    <PackageDescription>14 TABLET in 1 BOTTLE (71335-0075-6) </PackageDescription>
    <NDC11Code>71335-0075-06</NDC11Code>
    <ProductNDC>71335-0075</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lisinopril</ProprietaryName>
    <NonProprietaryName>Lisinopril</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20111101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076164</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>LISINOPRIL</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220315</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lisinopril is an angiotensin converting enzyme (ACE) inhibitor indicated for: 1 Treatment of hypertension in adults and pediatric patients 6 years of age and older (1.1), 2 Adjunct therapy for heart failure (1.2), 3 Treatment of Acute Myocardial Infarction (1.3).</IndicationAndUsage>
    <Description>Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O52H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets, USP, are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate and magnesium stearate. 5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and yellow ferric oxide. 10 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and red ferric oxide. 20 and 30 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and red ferric oxide. 40 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and yellow ferric oxide. *: Pregelatinized starch is a physically modified corn (maize) starch.</Description>
  </NDC>
  <NDC>
    <NDCCode>71335-0075-8</NDCCode>
    <PackageDescription>10 TABLET in 1 BOTTLE (71335-0075-8) </PackageDescription>
    <NDC11Code>71335-0075-08</NDC11Code>
    <ProductNDC>71335-0075</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lisinopril</ProprietaryName>
    <NonProprietaryName>Lisinopril</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20111101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076164</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>LISINOPRIL</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220315</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lisinopril is an angiotensin converting enzyme (ACE) inhibitor indicated for: 1 Treatment of hypertension in adults and pediatric patients 6 years of age and older (1.1), 2 Adjunct therapy for heart failure (1.2), 3 Treatment of Acute Myocardial Infarction (1.3).</IndicationAndUsage>
    <Description>Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O52H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets, USP, are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate and magnesium stearate. 5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and yellow ferric oxide. 10 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and red ferric oxide. 20 and 30 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and red ferric oxide. 40 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and yellow ferric oxide. *: Pregelatinized starch is a physically modified corn (maize) starch.</Description>
  </NDC>
  <NDC>
    <NDCCode>0075-0620-40</NDCCode>
    <PackageDescription>10 CELLO PACK in 1 CARTON (0075-0620-40)  / 1 SYRINGE in 1 CELLO PACK (0075-0620-01)  / .4 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>00075-0620-40</NDC11Code>
    <ProductNDC>0075-0620</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lovenox</ProprietaryName>
    <NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19930329</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020164</ApplicationNumber>
    <LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
    <SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/.4mL</StrengthUnit>
    <Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-05-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19930329</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lovenox is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non–Q-wave myocardial infarction (MI) (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4).</IndicationAndUsage>
    <Description>Lovenox is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA.                    R1 = H or SO3Na and R2 = SO3Na or COCH3. Lovenox 100 mg/mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Lovenox 150 mg/mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Lovenox prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection. The multiple-dose vial contains 15 mg benzyl alcohol per 1 mL as a preservative [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
  </NDC>
  <NDC>
    <NDCCode>0075-0621-60</NDCCode>
    <PackageDescription>10 CELLO PACK in 1 CARTON (0075-0621-60)  / 1 SYRINGE in 1 CELLO PACK (0075-0621-01)  / .6 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>00075-0621-60</NDC11Code>
    <ProductNDC>0075-0621</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lovenox</ProprietaryName>
    <NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19930329</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020164</ApplicationNumber>
    <LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
    <SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
    <StrengthNumber>60</StrengthNumber>
    <StrengthUnit>mg/.6mL</StrengthUnit>
    <Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-05-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19930329</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lovenox is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non–Q-wave myocardial infarction (MI) (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4).</IndicationAndUsage>
    <Description>Lovenox is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA.                    R1 = H or SO3Na and R2 = SO3Na or COCH3. Lovenox 100 mg/mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Lovenox 150 mg/mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Lovenox prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection. The multiple-dose vial contains 15 mg benzyl alcohol per 1 mL as a preservative [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
  </NDC>
  <NDC>
    <NDCCode>0075-0622-80</NDCCode>
    <PackageDescription>10 CELLO PACK in 1 CARTON (0075-0622-80)  / 1 SYRINGE in 1 CELLO PACK (0075-0622-01)  / .8 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>00075-0622-80</NDC11Code>
    <ProductNDC>0075-0622</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lovenox</ProprietaryName>
    <NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19930329</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020164</ApplicationNumber>
    <LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
    <SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
    <StrengthNumber>80</StrengthNumber>
    <StrengthUnit>mg/.8mL</StrengthUnit>
    <Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-05-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19930329</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lovenox is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non–Q-wave myocardial infarction (MI) (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4).</IndicationAndUsage>
    <Description>Lovenox is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA.                    R1 = H or SO3Na and R2 = SO3Na or COCH3. Lovenox 100 mg/mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Lovenox 150 mg/mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Lovenox prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection. The multiple-dose vial contains 15 mg benzyl alcohol per 1 mL as a preservative [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
  </NDC>
  <NDC>
    <NDCCode>0075-0623-00</NDCCode>
    <PackageDescription>10 CELLO PACK in 1 CARTON (0075-0623-00)  / 1 SYRINGE in 1 CELLO PACK (0075-0623-03)  / 1 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>00075-0623-00</NDC11Code>
    <ProductNDC>0075-0623</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lovenox</ProprietaryName>
    <NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19930329</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020164</ApplicationNumber>
    <LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
    <SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-05-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19930329</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lovenox is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non–Q-wave myocardial infarction (MI) (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4).</IndicationAndUsage>
    <Description>Lovenox is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA.                    R1 = H or SO3Na and R2 = SO3Na or COCH3. Lovenox 100 mg/mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Lovenox 150 mg/mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Lovenox prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection. The multiple-dose vial contains 15 mg benzyl alcohol per 1 mL as a preservative [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
  </NDC>
  <NDC>
    <NDCCode>0075-0624-30</NDCCode>
    <PackageDescription>10 CELLO PACK in 1 CARTON (0075-0624-30)  / 1 SYRINGE in 1 CELLO PACK (0075-0624-01)  / .3 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>00075-0624-30</NDC11Code>
    <ProductNDC>0075-0624</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lovenox</ProprietaryName>
    <NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19930329</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020164</ApplicationNumber>
    <LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
    <SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/.3mL</StrengthUnit>
    <Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-05-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19930329</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lovenox is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non–Q-wave myocardial infarction (MI) (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4).</IndicationAndUsage>
    <Description>Lovenox is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA.                    R1 = H or SO3Na and R2 = SO3Na or COCH3. Lovenox 100 mg/mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Lovenox 150 mg/mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Lovenox prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection. The multiple-dose vial contains 15 mg benzyl alcohol per 1 mL as a preservative [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
  </NDC>
  <NDC>
    <NDCCode>0075-0626-03</NDCCode>
    <PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0075-0626-03)  / 3 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
    <NDC11Code>00075-0626-03</NDC11Code>
    <ProductNDC>0075-0626</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lovenox</ProprietaryName>
    <NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19930329</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020164</ApplicationNumber>
    <LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
    <SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>mg/3mL</StrengthUnit>
    <Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-05-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19930329</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lovenox is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non–Q-wave myocardial infarction (MI) (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4).</IndicationAndUsage>
    <Description>Lovenox is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA.                    R1 = H or SO3Na and R2 = SO3Na or COCH3. Lovenox 100 mg/mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Lovenox 150 mg/mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Lovenox prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection. The multiple-dose vial contains 15 mg benzyl alcohol per 1 mL as a preservative [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
  </NDC>
  <NDC>
    <NDCCode>0075-2912-01</NDCCode>
    <PackageDescription>10 CELLO PACK in 1 CARTON (0075-2912-01)  / 1 SYRINGE in 1 CELLO PACK (0075-2912-00)  / .8 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>00075-2912-01</NDC11Code>
    <ProductNDC>0075-2912</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lovenox</ProprietaryName>
    <NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19930329</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020164</ApplicationNumber>
    <LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
    <SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
    <StrengthNumber>120</StrengthNumber>
    <StrengthUnit>mg/.8mL</StrengthUnit>
    <Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-05-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19930329</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lovenox is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non–Q-wave myocardial infarction (MI) (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4).</IndicationAndUsage>
    <Description>Lovenox is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA.                    R1 = H or SO3Na and R2 = SO3Na or COCH3. Lovenox 100 mg/mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Lovenox 150 mg/mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Lovenox prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection. The multiple-dose vial contains 15 mg benzyl alcohol per 1 mL as a preservative [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
  </NDC>
  <NDC>
    <NDCCode>0075-2915-01</NDCCode>
    <PackageDescription>10 CELLO PACK in 1 CARTON (0075-2915-01)  / 1 SYRINGE in 1 CELLO PACK (0075-2915-00)  / 1 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>00075-2915-01</NDC11Code>
    <ProductNDC>0075-2915</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lovenox</ProprietaryName>
    <NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19930329</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020164</ApplicationNumber>
    <LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
    <SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-05-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19930329</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lovenox is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non–Q-wave myocardial infarction (MI) (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4).</IndicationAndUsage>
    <Description>Lovenox is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA.                    R1 = H or SO3Na and R2 = SO3Na or COCH3. Lovenox 100 mg/mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Lovenox 150 mg/mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Lovenox prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection. The multiple-dose vial contains 15 mg benzyl alcohol per 1 mL as a preservative [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
  </NDC>
  <NDC>
    <NDCCode>0075-8013-10</NDCCode>
    <PackageDescription>10 CELLO PACK in 1 CARTON (0075-8013-10)  / 1 SYRINGE in 1 CELLO PACK / .3 mL in 1 SYRINGE (0075-8013-01) </PackageDescription>
    <NDC11Code>00075-8013-10</NDC11Code>
    <ProductNDC>0075-8013</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lovenox</ProprietaryName>
    <NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19930329</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020164</ApplicationNumber>
    <LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
    <SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/.3mL</StrengthUnit>
    <Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19930329</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lovenox is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non–Q-wave myocardial infarction (MI) (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4).</IndicationAndUsage>
    <Description>Lovenox is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA.                    R1 = H or SO3Na and R2 = SO3Na or COCH3. Lovenox 100 mg/mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Lovenox 150 mg/mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Lovenox prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection. The multiple-dose vial contains 15 mg benzyl alcohol per 1 mL as a preservative [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
  </NDC>
  <NDC>
    <NDCCode>0075-8014-10</NDCCode>
    <PackageDescription>10 CELLO PACK in 1 CARTON (0075-8014-10)  / 1 SYRINGE in 1 CELLO PACK / .4 mL in 1 SYRINGE (0075-8014-01) </PackageDescription>
    <NDC11Code>00075-8014-10</NDC11Code>
    <ProductNDC>0075-8014</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lovenox</ProprietaryName>
    <NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19930329</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020164</ApplicationNumber>
    <LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
    <SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/.4mL</StrengthUnit>
    <Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19930329</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lovenox is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non–Q-wave myocardial infarction (MI) (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4).</IndicationAndUsage>
    <Description>Lovenox is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA.                    R1 = H or SO3Na and R2 = SO3Na or COCH3. Lovenox 100 mg/mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Lovenox 150 mg/mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Lovenox prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection. The multiple-dose vial contains 15 mg benzyl alcohol per 1 mL as a preservative [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
  </NDC>
  <NDC>
    <NDCCode>0075-8016-10</NDCCode>
    <PackageDescription>10 CELLO PACK in 1 CARTON (0075-8016-10)  / 1 SYRINGE in 1 CELLO PACK / .6 mL in 1 SYRINGE (0075-8016-01) </PackageDescription>
    <NDC11Code>00075-8016-10</NDC11Code>
    <ProductNDC>0075-8016</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lovenox</ProprietaryName>
    <NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19930329</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020164</ApplicationNumber>
    <LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
    <SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
    <StrengthNumber>60</StrengthNumber>
    <StrengthUnit>mg/.6mL</StrengthUnit>
    <Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19930329</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lovenox is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non–Q-wave myocardial infarction (MI) (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4).</IndicationAndUsage>
    <Description>Lovenox is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA.                    R1 = H or SO3Na and R2 = SO3Na or COCH3. Lovenox 100 mg/mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Lovenox 150 mg/mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Lovenox prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection. The multiple-dose vial contains 15 mg benzyl alcohol per 1 mL as a preservative [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
  </NDC>
  <NDC>
    <NDCCode>0075-8018-10</NDCCode>
    <PackageDescription>10 CELLO PACK in 1 CARTON (0075-8018-10)  / 1 SYRINGE in 1 CELLO PACK / .8 mL in 1 SYRINGE (0075-8018-01) </PackageDescription>
    <NDC11Code>00075-8018-10</NDC11Code>
    <ProductNDC>0075-8018</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lovenox</ProprietaryName>
    <NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19930329</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020164</ApplicationNumber>
    <LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
    <SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
    <StrengthNumber>80</StrengthNumber>
    <StrengthUnit>mg/.8mL</StrengthUnit>
    <Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19930329</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lovenox is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non–Q-wave myocardial infarction (MI) (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4).</IndicationAndUsage>
    <Description>Lovenox is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA.                    R1 = H or SO3Na and R2 = SO3Na or COCH3. Lovenox 100 mg/mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Lovenox 150 mg/mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Lovenox prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection. The multiple-dose vial contains 15 mg benzyl alcohol per 1 mL as a preservative [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
  </NDC>
  <NDC>
    <NDCCode>0075-8020-10</NDCCode>
    <PackageDescription>10 CELLO PACK in 1 CARTON (0075-8020-10)  / 1 SYRINGE in 1 CELLO PACK / 1 mL in 1 SYRINGE (0075-8020-01) </PackageDescription>
    <NDC11Code>00075-8020-10</NDC11Code>
    <ProductNDC>0075-8020</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lovenox</ProprietaryName>
    <NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19930329</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020164</ApplicationNumber>
    <LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
    <SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19930329</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lovenox is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non–Q-wave myocardial infarction (MI) (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4).</IndicationAndUsage>
    <Description>Lovenox is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA.                    R1 = H or SO3Na and R2 = SO3Na or COCH3. Lovenox 100 mg/mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Lovenox 150 mg/mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Lovenox prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection. The multiple-dose vial contains 15 mg benzyl alcohol per 1 mL as a preservative [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
  </NDC>
  <NDC>
    <NDCCode>0075-8022-10</NDCCode>
    <PackageDescription>10 CELLO PACK in 1 CARTON (0075-8022-10)  / 1 SYRINGE in 1 CELLO PACK / .8 mL in 1 SYRINGE (0075-8022-01) </PackageDescription>
    <NDC11Code>00075-8022-10</NDC11Code>
    <ProductNDC>0075-8022</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lovenox</ProprietaryName>
    <NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19930329</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020164</ApplicationNumber>
    <LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
    <SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
    <StrengthNumber>120</StrengthNumber>
    <StrengthUnit>mg/.8mL</StrengthUnit>
    <Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19930329</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lovenox is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non–Q-wave myocardial infarction (MI) (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4).</IndicationAndUsage>
    <Description>Lovenox is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA.                    R1 = H or SO3Na and R2 = SO3Na or COCH3. Lovenox 100 mg/mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Lovenox 150 mg/mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Lovenox prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection. The multiple-dose vial contains 15 mg benzyl alcohol per 1 mL as a preservative [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
  </NDC>
  <NDC>
    <NDCCode>0075-8025-10</NDCCode>
    <PackageDescription>10 CELLO PACK in 1 CARTON (0075-8025-10)  / 1 SYRINGE in 1 CELLO PACK / 1 mL in 1 SYRINGE (0075-8025-01) </PackageDescription>
    <NDC11Code>00075-8025-10</NDC11Code>
    <ProductNDC>0075-8025</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lovenox</ProprietaryName>
    <NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19930329</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020164</ApplicationNumber>
    <LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
    <SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19930329</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lovenox is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non–Q-wave myocardial infarction (MI) (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4).</IndicationAndUsage>
    <Description>Lovenox is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA.                    R1 = H or SO3Na and R2 = SO3Na or COCH3. Lovenox 100 mg/mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Lovenox 150 mg/mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Lovenox prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection. The multiple-dose vial contains 15 mg benzyl alcohol per 1 mL as a preservative [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
  </NDC>
  <NDC>
    <NDCCode>0075-8030-01</NDCCode>
    <PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0075-8030-01)  / 3 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
    <NDC11Code>00075-8030-01</NDC11Code>
    <ProductNDC>0075-8030</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lovenox</ProprietaryName>
    <NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19930329</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020164</ApplicationNumber>
    <LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
    <SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>mg/3mL</StrengthUnit>
    <Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19930329</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lovenox is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non–Q-wave myocardial infarction (MI) (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4).</IndicationAndUsage>
    <Description>Lovenox is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA.                    R1 = H or SO3Na and R2 = SO3Na or COCH3. Lovenox 100 mg/mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Lovenox 150 mg/mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Lovenox prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection. The multiple-dose vial contains 15 mg benzyl alcohol per 1 mL as a preservative [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
  </NDC>
  <NDC>
    <NDCCode>0310-0075-01</NDCCode>
    <PackageDescription>28 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (0310-0075-01) </PackageDescription>
    <NDC11Code>00310-0075-01</NDC11Code>
    <ProductNDC>0310-0075</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Etcamah</ProprietaryName>
    <NonProprietaryName>Camizestrant</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20260904</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA220359</ApplicationNumber>
    <LabelerName>AstraZeneca Pharmaceuticals LP</LabelerName>
    <SubstanceName>CAMIZESTRANT</SubstanceName>
    <StrengthNumber>75</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2026-09-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260904</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ETCAMAH in combination with a CDK4/6 inhibitor (abemaciclib, palbociclib, or ribociclib) is indicated for the treatment of adult patients with hormone receptor (HR)-positive, human epidermal growth factor receptor 2 (HER2)-negative, locally advanced or metastatic breast cancer upon detection of ESR1 mutation during aromatase inhibitor and CDK4/6 inhibitor therapy, based on an FDA-authorized test [see Dosage and Administration (2.1)]. This indication is approved under accelerated approval based on progression-free survival as measured from detection of ESR1 mutation [see Clinical Studies (14)]. Continued approval for this indication may be contingent upon verification and description of clinical benefit in a confirmatory trial(s).</IndicationAndUsage>
    <Description>ETCAMAH tablets contain camizestrant, an estrogen receptor antagonist for oral use. The chemical name is N-[1-(3-fluoropropyl)-3-azetidinyl]-6-[(6S,8R)-8-methyl-7-(2,2,2-trifluoroethyl)-6,7,8,9-tetrahydro-3H-pyrazolo[4,3-f]isoquinolin-6-yl]-3-pyridinamine. Camizestrant is white to brown powder. The molecular formula for camizestrant is C24H28F4N6 and the molecular weight is 476.51 g/mol. The chemical structure for camizestrant is shown below. Each ETCAMAH tablet contains 75 mg camizestrant and the following inactive ingredients: anhydrous dibasic calcium phosphate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The tablet film-coating consists of ferric oxide red, ferric oxide yellow, ferrosoferric oxide, polyethylene glycol 3350, polyvinyl alcohol, talc and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>0597-0075-41</NDCCode>
    <PackageDescription>3 BLISTER PACK in 1 CARTON (0597-0075-41)  / 10 CAPSULE in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>00597-0075-41</NDC11Code>
    <ProductNDC>0597-0075</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Spiriva</ProprietaryName>
    <ProprietaryNameSuffix>Handihaler</ProprietaryNameSuffix>
    <NonProprietaryName>Tiotropium Bromide</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL; RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>20051011</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021395</ApplicationNumber>
    <LabelerName>Boehringer Ingelheim Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>TIOTROPIUM BROMIDE MONOHYDRATE</SubstanceName>
    <StrengthNumber>18</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20051011</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>SPIRIVA HANDIHALER (tiotropium bromide inhalation powder) is indicated for the long-term, once-daily, maintenance treatment of bronchospasm associated with chronic obstructive pulmonary disease (COPD), including chronic bronchitis and emphysema. SPIRIVA HANDIHALER is indicated to reduce exacerbations in COPD patients.</IndicationAndUsage>
    <Description>SPIRIVA HANDIHALER consists of SPIRIVA capsules and a HANDIHALER device. Each light green, hard gelatin SPIRIVA capsule contains a dry powder consisting of 18 mcg tiotropium (equivalent to 22.5 mcg tiotropium bromide monohydrate) blended with lactose monohydrate (which may contain milk proteins). The contents of SPIRIVA capsules are intended for oral inhalation only, and are intended for administration only with the HANDIHALER device. The active component of SPIRIVA HANDIHALER is tiotropium. The drug substance, tiotropium bromide monohydrate, is an anticholinergic with specificity for muscarinic receptors. It is chemically described as (1α, 2β, 4β, 5α, 7β)-7-[(Hydroxydi-2-thienylacetyl)oxy]-9,9-dimethyl-3-oxa-9-azoniatricyclo[3.3.1.02,4]nonane bromide monohydrate. It is a synthetic, non-chiral, quaternary ammonium compound. Tiotropium bromide is a white or yellowish white powder. It is sparingly soluble in water and soluble in methanol. The structural formula is. Tiotropium bromide (monohydrate) has a molecular mass of 490.4 and a molecular formula of C19H22NO4S2Br ∙ H2O. The HANDIHALER device is an inhalation device used to inhale the dry powder contained in the SPIRIVA capsule. The dry powder is delivered from the HANDIHALER device at flow rates as low as 20 L/min. Under standardized in vitro testing, the HANDIHALER device delivers a mean of 10.4 mcg tiotropium when tested at a flow rate of 39 L/min for 3.1 seconds (2 L total). In a study of 26 adult patients with COPD and severely compromised lung function [mean FEV1 1.02 L (range 0.45 to 2.24 L); 37.6% of predicted (range 16% to 65%)], the median peak inspiratory flow (PIF) through the HANDIHALER device was 30.0 L/min (range 20.4 to 45.6 L/min). The amount of drug delivered to the lungs will vary depending on patient factors such as inspiratory flow and peak inspiratory flow through the HANDIHALER device, which may vary from patient to patient, and may vary with the exposure time of the SPIRIVA capsule outside the blister pack.</Description>
  </NDC>
  <NDC>
    <NDCCode>0597-0075-47</NDCCode>
    <PackageDescription>9 BLISTER PACK in 1 CARTON (0597-0075-47)  / 10 CAPSULE in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>00597-0075-47</NDC11Code>
    <ProductNDC>0597-0075</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Spiriva</ProprietaryName>
    <ProprietaryNameSuffix>Handihaler</ProprietaryNameSuffix>
    <NonProprietaryName>Tiotropium Bromide</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL; RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>20051011</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021395</ApplicationNumber>
    <LabelerName>Boehringer Ingelheim Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>TIOTROPIUM BROMIDE MONOHYDRATE</SubstanceName>
    <StrengthNumber>18</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20051011</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>SPIRIVA HANDIHALER (tiotropium bromide inhalation powder) is indicated for the long-term, once-daily, maintenance treatment of bronchospasm associated with chronic obstructive pulmonary disease (COPD), including chronic bronchitis and emphysema. SPIRIVA HANDIHALER is indicated to reduce exacerbations in COPD patients.</IndicationAndUsage>
    <Description>SPIRIVA HANDIHALER consists of SPIRIVA capsules and a HANDIHALER device. Each light green, hard gelatin SPIRIVA capsule contains a dry powder consisting of 18 mcg tiotropium (equivalent to 22.5 mcg tiotropium bromide monohydrate) blended with lactose monohydrate (which may contain milk proteins). The contents of SPIRIVA capsules are intended for oral inhalation only, and are intended for administration only with the HANDIHALER device. The active component of SPIRIVA HANDIHALER is tiotropium. The drug substance, tiotropium bromide monohydrate, is an anticholinergic with specificity for muscarinic receptors. It is chemically described as (1α, 2β, 4β, 5α, 7β)-7-[(Hydroxydi-2-thienylacetyl)oxy]-9,9-dimethyl-3-oxa-9-azoniatricyclo[3.3.1.02,4]nonane bromide monohydrate. It is a synthetic, non-chiral, quaternary ammonium compound. Tiotropium bromide is a white or yellowish white powder. It is sparingly soluble in water and soluble in methanol. The structural formula is. Tiotropium bromide (monohydrate) has a molecular mass of 490.4 and a molecular formula of C19H22NO4S2Br ∙ H2O. The HANDIHALER device is an inhalation device used to inhale the dry powder contained in the SPIRIVA capsule. The dry powder is delivered from the HANDIHALER device at flow rates as low as 20 L/min. Under standardized in vitro testing, the HANDIHALER device delivers a mean of 10.4 mcg tiotropium when tested at a flow rate of 39 L/min for 3.1 seconds (2 L total). In a study of 26 adult patients with COPD and severely compromised lung function [mean FEV1 1.02 L (range 0.45 to 2.24 L); 37.6% of predicted (range 16% to 65%)], the median peak inspiratory flow (PIF) through the HANDIHALER device was 30.0 L/min (range 20.4 to 45.6 L/min). The amount of drug delivered to the lungs will vary depending on patient factors such as inspiratory flow and peak inspiratory flow through the HANDIHALER device, which may vary from patient to patient, and may vary with the exposure time of the SPIRIVA capsule outside the blister pack.</Description>
  </NDC>
</NDCList>