RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>71335-0174-9</NDCCode>
    <PackageDescription>18 TABLET in 1 BOTTLE (71335-0174-9) </PackageDescription>
    <NDC11Code>71335-0174-09</NDC11Code>
    <ProductNDC>71335-0174</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxycodone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Oxycodone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20121226</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077290</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>OXYCODONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>15</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2022-01-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150526</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>71335-0174-1</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (71335-0174-1) </PackageDescription>
    <NDC11Code>71335-0174-01</NDC11Code>
    <ProductNDC>71335-0174</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxycodone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Oxycodone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20121226</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077290</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>OXYCODONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>15</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2022-01-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150526</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>71335-0174-2</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE (71335-0174-2) </PackageDescription>
    <NDC11Code>71335-0174-02</NDC11Code>
    <ProductNDC>71335-0174</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxycodone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Oxycodone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20121226</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077290</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>OXYCODONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>15</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2022-01-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150526</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>71335-0174-3</NDCCode>
    <PackageDescription>30 TABLET in 1 BOTTLE (71335-0174-3) </PackageDescription>
    <NDC11Code>71335-0174-03</NDC11Code>
    <ProductNDC>71335-0174</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxycodone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Oxycodone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20121226</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077290</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>OXYCODONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>15</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2022-01-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150526</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>71335-0174-4</NDCCode>
    <PackageDescription>120 TABLET in 1 BOTTLE (71335-0174-4) </PackageDescription>
    <NDC11Code>71335-0174-04</NDC11Code>
    <ProductNDC>71335-0174</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxycodone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Oxycodone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20121226</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077290</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>OXYCODONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>15</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2022-01-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150526</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>71335-0174-5</NDCCode>
    <PackageDescription>100 TABLET in 1 BOTTLE (71335-0174-5) </PackageDescription>
    <NDC11Code>71335-0174-05</NDC11Code>
    <ProductNDC>71335-0174</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxycodone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Oxycodone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20121226</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077290</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>OXYCODONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>15</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2022-01-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150526</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>71335-0174-6</NDCCode>
    <PackageDescription>56 TABLET in 1 BOTTLE (71335-0174-6) </PackageDescription>
    <NDC11Code>71335-0174-06</NDC11Code>
    <ProductNDC>71335-0174</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxycodone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Oxycodone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20121226</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077290</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>OXYCODONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>15</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2022-01-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150526</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>71335-0174-7</NDCCode>
    <PackageDescription>84 TABLET in 1 BOTTLE (71335-0174-7) </PackageDescription>
    <NDC11Code>71335-0174-07</NDC11Code>
    <ProductNDC>71335-0174</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxycodone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Oxycodone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20121226</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077290</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>OXYCODONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>15</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2022-01-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150526</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>71335-0174-8</NDCCode>
    <PackageDescription>45 TABLET in 1 BOTTLE (71335-0174-8) </PackageDescription>
    <NDC11Code>71335-0174-08</NDC11Code>
    <ProductNDC>71335-0174</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxycodone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Oxycodone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20121226</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077290</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>OXYCODONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>15</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2022-01-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150526</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>0049-0174-02</NDCCode>
    <PackageDescription>100 TABLET, EXTENDED RELEASE in 1 BOTTLE (0049-0174-02) </PackageDescription>
    <NDC11Code>00049-0174-02</NDC11Code>
    <ProductNDC>0049-0174</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glucotrol</ProprietaryName>
    <ProprietaryNameSuffix>Xl</ProprietaryNameSuffix>
    <NonProprietaryName>Glipizide</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20130509</StartMarketingDate>
    <EndMarketingDate>20270731</EndMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020329</ApplicationNumber>
    <LabelerName>Roerig</LabelerName>
    <SubstanceName>GLIPIZIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20130509</StartMarketingDatePackage>
    <EndMarketingDatePackage>20270731</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>GLUCOTROL XL is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
    <Description>GLUCOTROL XL (glipizide) is an oral sulfonylurea. The Chemical Abstracts name of glipizide is 1-cyclohexyl-3-[[p-[2-(5-methylpyrazinecarboxamido)ethyl] phenyl]sulfonyl]urea. The molecular formula is C21H27N5O4S; the molecular weight is 445.55; the structural formula is shown below. Glipizide is a whitish, odorless powder with a pKa of 5.9. It is insoluble in water and alcohols, but soluble in 0.1 N NaOH; it is freely soluble in dimethylformamide. Each tablet contains 2.75 mg glipizide to provide a 2.5 mg dose. Each tablet contains 5.49 mg glipizide to provide a 5 mg dose. Each tablet contains 10.98 mg glipizide to provide a 10 mg dose. Inert ingredients in the 2.5 mg, 5 mg and 10 mg formulations are: polyethylene oxide, hypromellose, magnesium stearate, sodium chloride, red ferric oxide, cellulose acetate, polyethylene glycol, Opadry® blue (OY-LS-20921)(2.5 mg tablets), Opadry® white (YS-2-7063)(5 mg and 10 mg tablet) and Opacode® Black Ink (S-1-17823).</Description>
  </NDC>
  <NDC>
    <NDCCode>0049-0174-03</NDCCode>
    <PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (0049-0174-03) </PackageDescription>
    <NDC11Code>00049-0174-03</NDC11Code>
    <ProductNDC>0049-0174</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glucotrol</ProprietaryName>
    <ProprietaryNameSuffix>Xl</ProprietaryNameSuffix>
    <NonProprietaryName>Glipizide</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20130509</StartMarketingDate>
    <EndMarketingDate>20270731</EndMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020329</ApplicationNumber>
    <LabelerName>Roerig</LabelerName>
    <SubstanceName>GLIPIZIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20130509</StartMarketingDatePackage>
    <EndMarketingDatePackage>20270731</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>GLUCOTROL XL is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
    <Description>GLUCOTROL XL (glipizide) is an oral sulfonylurea. The Chemical Abstracts name of glipizide is 1-cyclohexyl-3-[[p-[2-(5-methylpyrazinecarboxamido)ethyl] phenyl]sulfonyl]urea. The molecular formula is C21H27N5O4S; the molecular weight is 445.55; the structural formula is shown below. Glipizide is a whitish, odorless powder with a pKa of 5.9. It is insoluble in water and alcohols, but soluble in 0.1 N NaOH; it is freely soluble in dimethylformamide. Each tablet contains 2.75 mg glipizide to provide a 2.5 mg dose. Each tablet contains 5.49 mg glipizide to provide a 5 mg dose. Each tablet contains 10.98 mg glipizide to provide a 10 mg dose. Inert ingredients in the 2.5 mg, 5 mg and 10 mg formulations are: polyethylene oxide, hypromellose, magnesium stearate, sodium chloride, red ferric oxide, cellulose acetate, polyethylene glycol, Opadry® blue (OY-LS-20921)(2.5 mg tablets), Opadry® white (YS-2-7063)(5 mg and 10 mg tablet) and Opacode® Black Ink (S-1-17823).</Description>
  </NDC>
  <NDC>
    <NDCCode>14141-174-01</NDCCode>
    <PackageDescription>9 g in 1 JAR (14141-174-01) </PackageDescription>
    <NDC11Code>14141-0174-01</NDC11Code>
    <ProductNDC>14141-174</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Clarite Makeup For A Cleaner Appearance Spf 30 160-n</ProprietaryName>
    <NonProprietaryName>Octinoxate, Zinc Oxide</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20200324</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
    <ApplicationNumber>part352</ApplicationNumber>
    <LabelerName>BEL STAR S A</LabelerName>
    <SubstanceName>OCTINOXATE; ZINC OXIDE</SubstanceName>
    <StrengthNumber>7.5; 7.84</StrengthNumber>
    <StrengthUnit>g/100g; g/100g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2020-12-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200324</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>16571-174-03</NDCCode>
    <PackageDescription>30 TABLET in 1 BOTTLE (16571-174-03) </PackageDescription>
    <NDC11Code>16571-0174-03</NDC11Code>
    <ProductNDC>16571-174</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Eplerenone</ProprietaryName>
    <NonProprietaryName>Eplerenone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240930</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214663</ApplicationNumber>
    <LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
    <SubstanceName>EPLERENONE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Aldosterone Antagonist [EPC], Aldosterone Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-07-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240930</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Eplerenone tablets is an aldosterone antagonist indicated for:  Improving survival of stable adult patients with symptomatic heart failure with reduced ejection fraction (HFrEF) after an acute myocardial infarction. (1.1)  The treatment of hypertension in adults, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.2).</IndicationAndUsage>
    <Description>Eplerenone tablets contains eplerenone, a blocker of aldosterone binding at the mineralocorticoid receptor. Eplerenone is chemically described as Pregn-4-ene-7, 21-dicarboxylic acid, 9, 11-epoxy-17-hydroxy-3-oxo-, γ -lactone, methyl ester, (7α,11α,17α)-. Its empirical formula is C24H30O6 and it has a molecular weight of 414.50. The structural formula of eplerenone is represented below. Eplerenone is a white to off-white powder. It is very slightly soluble in water, with its solubility essentially pH-independent The octanol/water partition coefficient of eplerenone is approximately 7.1 at pH 7.0. Eplerenone tablets for oral administration contain 25 mg or 50 mg of eplerenone and the following inactive ingredients: colloidal silicone dioxide, croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate, talc and opadry yellow (hypromellose, iron oxide   red, iron oxide yellow, macrogol, polysorbate 80, and titanium dioxide).</Description>
  </NDC>
  <NDC>
    <NDCCode>16571-174-09</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE (16571-174-09) </PackageDescription>
    <NDC11Code>16571-0174-09</NDC11Code>
    <ProductNDC>16571-174</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Eplerenone</ProprietaryName>
    <NonProprietaryName>Eplerenone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240930</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214663</ApplicationNumber>
    <LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
    <SubstanceName>EPLERENONE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Aldosterone Antagonist [EPC], Aldosterone Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-07-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240930</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Eplerenone tablets is an aldosterone antagonist indicated for:  Improving survival of stable adult patients with symptomatic heart failure with reduced ejection fraction (HFrEF) after an acute myocardial infarction. (1.1)  The treatment of hypertension in adults, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.2).</IndicationAndUsage>
    <Description>Eplerenone tablets contains eplerenone, a blocker of aldosterone binding at the mineralocorticoid receptor. Eplerenone is chemically described as Pregn-4-ene-7, 21-dicarboxylic acid, 9, 11-epoxy-17-hydroxy-3-oxo-, γ -lactone, methyl ester, (7α,11α,17α)-. Its empirical formula is C24H30O6 and it has a molecular weight of 414.50. The structural formula of eplerenone is represented below. Eplerenone is a white to off-white powder. It is very slightly soluble in water, with its solubility essentially pH-independent The octanol/water partition coefficient of eplerenone is approximately 7.1 at pH 7.0. Eplerenone tablets for oral administration contain 25 mg or 50 mg of eplerenone and the following inactive ingredients: colloidal silicone dioxide, croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate, talc and opadry yellow (hypromellose, iron oxide   red, iron oxide yellow, macrogol, polysorbate 80, and titanium dioxide).</Description>
  </NDC>
  <NDC>
    <NDCCode>24510-174-01</NDCCode>
    <PackageDescription>10 BLISTER PACK in 1 CARTON (24510-174-01)  / 10 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>24510-0174-01</NDC11Code>
    <ProductNDC>24510-174</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nucynta</ProprietaryName>
    <ProprietaryNameSuffix>Er</ProprietaryNameSuffix>
    <NonProprietaryName>Tapentadol Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190419</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA200533</ApplicationNumber>
    <LabelerName>Collegium Pharmaceutical, Inc.</LabelerName>
    <SubstanceName>TAPENTADOL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Opioid Agonist [EPC], Opioid Agonists [MoA]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-01-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190419</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>NUCYNTA ER (tapentadol) is indicated for the management of: 1 Severe and persistent pain in adults that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids., 2 Severe and persistent neuropathic pain associated with diabetic peripheral neuropathy (DPN) in adults that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids.</IndicationAndUsage>
    <Description>NUCYNTA ER (tapentadol) is an opioid agonist, supplied in extended-release film-coated tablets for oral administration, containing 58.24, 116.48, 174.72, 232.96, and 291.20 mg of tapentadol hydrochloride in each tablet strength, corresponding to 50, 100, 150, 200, and 250 mg of tapentadol free-base, respectively. The chemical name is 3-[(1R,2R)-3-(dimethylamino)-1-ethyl-2-methylpropyl]phenol monohydrochloride. The structural formula is. The molecular weight of tapentadol HCl is 257.80, and the molecular formula is C14H23NO∙HCl. The n-octanol: water partition coefficient log P value is 2.89. The pKa values are 9.36 and 10.45. In addition to the active ingredient tapentadol HCl, tablets also contain the following inactive ingredients: alpha-tocopherol (vitamin E), hypromellose, polyethylene glycol, and polyethylene oxide. The film coating is comprised of polyvinyl alcohol, polyethylene glycol, talc, titanium dioxide, and the colorant FD&amp;C Blue #2 aluminum lake is used for 100, 150, 200, and 250 mg strengths; and additionally, yellow iron oxide is used in 150 mg tablets. Printing inks contain shellac glaze and propylene glycol for all strengths, and black iron oxide (50, 100, 150 and 200 mg tablets) or titanium dioxide (250 mg tablets).</Description>
  </NDC>
  <NDC>
    <NDCCode>24510-174-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (24510-174-60) </PackageDescription>
    <NDC11Code>24510-0174-60</NDC11Code>
    <ProductNDC>24510-174</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nucynta</ProprietaryName>
    <ProprietaryNameSuffix>Er</ProprietaryNameSuffix>
    <NonProprietaryName>Tapentadol Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190419</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA200533</ApplicationNumber>
    <LabelerName>Collegium Pharmaceutical, Inc.</LabelerName>
    <SubstanceName>TAPENTADOL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Opioid Agonist [EPC], Opioid Agonists [MoA]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-01-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190419</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>NUCYNTA ER (tapentadol) is indicated for the management of: 1 Severe and persistent pain in adults that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids., 2 Severe and persistent neuropathic pain associated with diabetic peripheral neuropathy (DPN) in adults that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids.</IndicationAndUsage>
    <Description>NUCYNTA ER (tapentadol) is an opioid agonist, supplied in extended-release film-coated tablets for oral administration, containing 58.24, 116.48, 174.72, 232.96, and 291.20 mg of tapentadol hydrochloride in each tablet strength, corresponding to 50, 100, 150, 200, and 250 mg of tapentadol free-base, respectively. The chemical name is 3-[(1R,2R)-3-(dimethylamino)-1-ethyl-2-methylpropyl]phenol monohydrochloride. The structural formula is. The molecular weight of tapentadol HCl is 257.80, and the molecular formula is C14H23NO∙HCl. The n-octanol: water partition coefficient log P value is 2.89. The pKa values are 9.36 and 10.45. In addition to the active ingredient tapentadol HCl, tablets also contain the following inactive ingredients: alpha-tocopherol (vitamin E), hypromellose, polyethylene glycol, and polyethylene oxide. The film coating is comprised of polyvinyl alcohol, polyethylene glycol, talc, titanium dioxide, and the colorant FD&amp;C Blue #2 aluminum lake is used for 100, 150, 200, and 250 mg strengths; and additionally, yellow iron oxide is used in 150 mg tablets. Printing inks contain shellac glaze and propylene glycol for all strengths, and black iron oxide (50, 100, 150 and 200 mg tablets) or titanium dioxide (250 mg tablets).</Description>
  </NDC>
  <NDC>
    <NDCCode>27241-174-56</NDCCode>
    <PackageDescription>56 TABLET, FILM COATED in 1 BOTTLE (27241-174-56) </PackageDescription>
    <NDC11Code>27241-0174-56</NDC11Code>
    <ProductNDC>27241-174</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Varenicline</ProprietaryName>
    <NonProprietaryName>Varenicline Tartrate</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240131</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213019</ApplicationNumber>
    <LabelerName>Ajanta Pharma USA Inc.</LabelerName>
    <SubstanceName>VARENICLINE TARTRATE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cholinergic Agonists [MoA], Cholinergic Receptor Agonist [EPC], Partial Cholinergic Nicotinic Agonist [EPC], Partial Cholinergic Nicotinic Agonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240131</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Varenicline tablets are indicated for use as an aid to smoking cessation treatment.</IndicationAndUsage>
    <Description>Varenicline tablets contain varenicline (as the tartrate salt), which is a partial nicotinic agonist selective for α4β2 nicotinic acetylcholine receptor subtypes. Varenicline, as the tartrate salt, is off-white to light fawn powder with the following chemical name: 7,8,9,10-tetrahydro-6,10-methano-6H-pyrazino[2,3-h][3]benzazepine, (2R,3R)-2,3-dihydroxybutanedioate (1:1). It is freely soluble in water and slightly soluble in N, N-dimethyl Formamide. Varenicline tartrate has a molecular weight of 361.35 Daltons, and a molecular formula of C13H13N3  C4H6O6. The chemical structure is. Varenicline tablets are supplied for oral administration in two strengths: a 0.5 mg  off-white, capsule shaped, biconvex, film-coated tablets, debossed with ‘V1’ on one side and plain on other side and a 1 mg blue colored, capsule shaped, biconvex, film-coated tablets, debossed with ‘V2’ on one side and plain on other side. Each 0.5 mg varenicline tablet contains 0.85 mg of varenicline tartrate equivalent to 0.5 mg of varenicline free base; each 1 mg varenicline tablet contains 1.71 mg of varenicline tartrate equivalent to 1 mg of varenicline free base. The following inactive ingredients are included in the tablets: microcrystalline cellulose, anhydrous dibasic calcium phosphate, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate, maltodextrin. The film coating contains hypromellose, titanium dioxide, polyethylene glycol. 1 mg has FD&amp;C Blue # 2 and FD&amp;C yellow # 6.</Description>
  </NDC>
  <NDC>
    <NDCCode>27241-174-77</NDCCode>
    <PackageDescription>4 BLISTER PACK in 1 CARTON (27241-174-77)  / 56 TABLET, FILM COATED in 1 BLISTER PACK (27241-174-11) </PackageDescription>
    <NDC11Code>27241-0174-77</NDC11Code>
    <ProductNDC>27241-174</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Varenicline</ProprietaryName>
    <NonProprietaryName>Varenicline Tartrate</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240131</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213019</ApplicationNumber>
    <LabelerName>Ajanta Pharma USA Inc.</LabelerName>
    <SubstanceName>VARENICLINE TARTRATE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cholinergic Agonists [MoA], Cholinergic Receptor Agonist [EPC], Partial Cholinergic Nicotinic Agonist [EPC], Partial Cholinergic Nicotinic Agonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240131</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Varenicline tablets are indicated for use as an aid to smoking cessation treatment.</IndicationAndUsage>
    <Description>Varenicline tablets contain varenicline (as the tartrate salt), which is a partial nicotinic agonist selective for α4β2 nicotinic acetylcholine receptor subtypes. Varenicline, as the tartrate salt, is off-white to light fawn powder with the following chemical name: 7,8,9,10-tetrahydro-6,10-methano-6H-pyrazino[2,3-h][3]benzazepine, (2R,3R)-2,3-dihydroxybutanedioate (1:1). It is freely soluble in water and slightly soluble in N, N-dimethyl Formamide. Varenicline tartrate has a molecular weight of 361.35 Daltons, and a molecular formula of C13H13N3  C4H6O6. The chemical structure is. Varenicline tablets are supplied for oral administration in two strengths: a 0.5 mg  off-white, capsule shaped, biconvex, film-coated tablets, debossed with ‘V1’ on one side and plain on other side and a 1 mg blue colored, capsule shaped, biconvex, film-coated tablets, debossed with ‘V2’ on one side and plain on other side. Each 0.5 mg varenicline tablet contains 0.85 mg of varenicline tartrate equivalent to 0.5 mg of varenicline free base; each 1 mg varenicline tablet contains 1.71 mg of varenicline tartrate equivalent to 1 mg of varenicline free base. The following inactive ingredients are included in the tablets: microcrystalline cellulose, anhydrous dibasic calcium phosphate, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate, maltodextrin. The film coating contains hypromellose, titanium dioxide, polyethylene glycol. 1 mg has FD&amp;C Blue # 2 and FD&amp;C yellow # 6.</Description>
  </NDC>
  <NDC>
    <NDCCode>33261-174-00</NDCCode>
    <PackageDescription>100 TABLET in 1 BOTTLE, PLASTIC (33261-174-00)</PackageDescription>
    <NDC11Code>33261-0174-00</NDC11Code>
    <ProductNDC>33261-174</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Furosemide</ProprietaryName>
    <NonProprietaryName>Furosemide</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20090129</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078010</ApplicationNumber>
    <LabelerName>Aidarex Pharmaceuticals LLC</LabelerName>
    <SubstanceName>FUROSEMIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Increased Diuresis at Loop of Henle [PE],Loop Diuretic [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2020-01-01</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Furosemide tablets, USP is indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired.</IndicationAndUsage>
    <Description>Furosemide is a diuretic which is an anthranilic acid derivative. Furosemide tablets, USP for oral administration contain furosemide, USP as the active ingredient and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium starch glycolate. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide, USP is available as white to off white round tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide, USP is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, soluble in 15 parts of acetone, freely soluble in dimethylformamide and in solution of alkali hydroxides; soluble in methanol; sparingly soluble in alcohol; very slightly soluble in chloroform. The CAS Registry Number is 54-31-9. It has a molecular formula of C12H11ClN2O5S and a molecular weight of 330.75. Tested by USP Dissolution Test 1. The molecular structure is as follows.</Description>
  </NDC>
  <NDC>
    <NDCCode>33261-174-08</NDCCode>
    <PackageDescription>8 TABLET in 1 BOTTLE, PLASTIC (33261-174-08)</PackageDescription>
    <NDC11Code>33261-0174-08</NDC11Code>
    <ProductNDC>33261-174</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Furosemide</ProprietaryName>
    <NonProprietaryName>Furosemide</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20090129</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078010</ApplicationNumber>
    <LabelerName>Aidarex Pharmaceuticals LLC</LabelerName>
    <SubstanceName>FUROSEMIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Increased Diuresis at Loop of Henle [PE],Loop Diuretic [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2020-01-01</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Furosemide tablets, USP is indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired.</IndicationAndUsage>
    <Description>Furosemide is a diuretic which is an anthranilic acid derivative. Furosemide tablets, USP for oral administration contain furosemide, USP as the active ingredient and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium starch glycolate. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide, USP is available as white to off white round tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide, USP is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, soluble in 15 parts of acetone, freely soluble in dimethylformamide and in solution of alkali hydroxides; soluble in methanol; sparingly soluble in alcohol; very slightly soluble in chloroform. The CAS Registry Number is 54-31-9. It has a molecular formula of C12H11ClN2O5S and a molecular weight of 330.75. Tested by USP Dissolution Test 1. The molecular structure is as follows.</Description>
  </NDC>
  <NDC>
    <NDCCode>33261-174-14</NDCCode>
    <PackageDescription>14 TABLET in 1 BOTTLE, PLASTIC (33261-174-14)</PackageDescription>
    <NDC11Code>33261-0174-14</NDC11Code>
    <ProductNDC>33261-174</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Furosemide</ProprietaryName>
    <NonProprietaryName>Furosemide</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20090129</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078010</ApplicationNumber>
    <LabelerName>Aidarex Pharmaceuticals LLC</LabelerName>
    <SubstanceName>FUROSEMIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Increased Diuresis at Loop of Henle [PE],Loop Diuretic [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2020-01-01</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Furosemide tablets, USP is indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired.</IndicationAndUsage>
    <Description>Furosemide is a diuretic which is an anthranilic acid derivative. Furosemide tablets, USP for oral administration contain furosemide, USP as the active ingredient and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium starch glycolate. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide, USP is available as white to off white round tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide, USP is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, soluble in 15 parts of acetone, freely soluble in dimethylformamide and in solution of alkali hydroxides; soluble in methanol; sparingly soluble in alcohol; very slightly soluble in chloroform. The CAS Registry Number is 54-31-9. It has a molecular formula of C12H11ClN2O5S and a molecular weight of 330.75. Tested by USP Dissolution Test 1. The molecular structure is as follows.</Description>
  </NDC>
  <NDC>
    <NDCCode>33261-174-20</NDCCode>
    <PackageDescription>20 TABLET in 1 BOTTLE, PLASTIC (33261-174-20)</PackageDescription>
    <NDC11Code>33261-0174-20</NDC11Code>
    <ProductNDC>33261-174</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Furosemide</ProprietaryName>
    <NonProprietaryName>Furosemide</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20090129</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078010</ApplicationNumber>
    <LabelerName>Aidarex Pharmaceuticals LLC</LabelerName>
    <SubstanceName>FUROSEMIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Increased Diuresis at Loop of Henle [PE],Loop Diuretic [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2020-01-01</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Furosemide tablets, USP is indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired.</IndicationAndUsage>
    <Description>Furosemide is a diuretic which is an anthranilic acid derivative. Furosemide tablets, USP for oral administration contain furosemide, USP as the active ingredient and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium starch glycolate. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide, USP is available as white to off white round tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide, USP is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, soluble in 15 parts of acetone, freely soluble in dimethylformamide and in solution of alkali hydroxides; soluble in methanol; sparingly soluble in alcohol; very slightly soluble in chloroform. The CAS Registry Number is 54-31-9. It has a molecular formula of C12H11ClN2O5S and a molecular weight of 330.75. Tested by USP Dissolution Test 1. The molecular structure is as follows.</Description>
  </NDC>
  <NDC>
    <NDCCode>33261-174-30</NDCCode>
    <PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (33261-174-30)</PackageDescription>
    <NDC11Code>33261-0174-30</NDC11Code>
    <ProductNDC>33261-174</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Furosemide</ProprietaryName>
    <NonProprietaryName>Furosemide</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20090129</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078010</ApplicationNumber>
    <LabelerName>Aidarex Pharmaceuticals LLC</LabelerName>
    <SubstanceName>FUROSEMIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Increased Diuresis at Loop of Henle [PE],Loop Diuretic [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2020-01-01</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Furosemide tablets, USP is indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired.</IndicationAndUsage>
    <Description>Furosemide is a diuretic which is an anthranilic acid derivative. Furosemide tablets, USP for oral administration contain furosemide, USP as the active ingredient and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium starch glycolate. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide, USP is available as white to off white round tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide, USP is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, soluble in 15 parts of acetone, freely soluble in dimethylformamide and in solution of alkali hydroxides; soluble in methanol; sparingly soluble in alcohol; very slightly soluble in chloroform. The CAS Registry Number is 54-31-9. It has a molecular formula of C12H11ClN2O5S and a molecular weight of 330.75. Tested by USP Dissolution Test 1. The molecular structure is as follows.</Description>
  </NDC>
  <NDC>
    <NDCCode>33261-174-60</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE, PLASTIC (33261-174-60)</PackageDescription>
    <NDC11Code>33261-0174-60</NDC11Code>
    <ProductNDC>33261-174</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Furosemide</ProprietaryName>
    <NonProprietaryName>Furosemide</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20090129</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078010</ApplicationNumber>
    <LabelerName>Aidarex Pharmaceuticals LLC</LabelerName>
    <SubstanceName>FUROSEMIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Increased Diuresis at Loop of Henle [PE],Loop Diuretic [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2020-01-01</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Furosemide tablets, USP is indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired.</IndicationAndUsage>
    <Description>Furosemide is a diuretic which is an anthranilic acid derivative. Furosemide tablets, USP for oral administration contain furosemide, USP as the active ingredient and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium starch glycolate. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide, USP is available as white to off white round tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide, USP is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, soluble in 15 parts of acetone, freely soluble in dimethylformamide and in solution of alkali hydroxides; soluble in methanol; sparingly soluble in alcohol; very slightly soluble in chloroform. The CAS Registry Number is 54-31-9. It has a molecular formula of C12H11ClN2O5S and a molecular weight of 330.75. Tested by USP Dissolution Test 1. The molecular structure is as follows.</Description>
  </NDC>
  <NDC>
    <NDCCode>33261-174-90</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE, PLASTIC (33261-174-90)</PackageDescription>
    <NDC11Code>33261-0174-90</NDC11Code>
    <ProductNDC>33261-174</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Furosemide</ProprietaryName>
    <NonProprietaryName>Furosemide</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20090129</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078010</ApplicationNumber>
    <LabelerName>Aidarex Pharmaceuticals LLC</LabelerName>
    <SubstanceName>FUROSEMIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Increased Diuresis at Loop of Henle [PE],Loop Diuretic [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2020-01-01</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Furosemide tablets, USP is indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired.</IndicationAndUsage>
    <Description>Furosemide is a diuretic which is an anthranilic acid derivative. Furosemide tablets, USP for oral administration contain furosemide, USP as the active ingredient and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium starch glycolate. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide, USP is available as white to off white round tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide, USP is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, soluble in 15 parts of acetone, freely soluble in dimethylformamide and in solution of alkali hydroxides; soluble in methanol; sparingly soluble in alcohol; very slightly soluble in chloroform. The CAS Registry Number is 54-31-9. It has a molecular formula of C12H11ClN2O5S and a molecular weight of 330.75. Tested by USP Dissolution Test 1. The molecular structure is as follows.</Description>
  </NDC>
  <NDC>
    <NDCCode>42254-174-45</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (42254-174-45)  &gt; 45 g in 1 TUBE</PackageDescription>
    <NDC11Code>42254-0174-45</NDC11Code>
    <ProductNDC>42254-174</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clobetasol Propionate</ProprietaryName>
    <NonProprietaryName>Clobetasol Propionate</NonProprietaryName>
    <DosageFormName>OINTMENT</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20100607</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074221</ApplicationNumber>
    <LabelerName>Rebel Distributors Corp</LabelerName>
    <SubstanceName>CLOBETASOL PROPIONATE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Clobetasol propionate cream and ointment are super-high potency corticosteroid formulations indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 g/week because of the potential for the drug to suppress the hypothalamicpituitary- adrenal (HPA) axis. Use in pediatric patients under 12 years of age is not recommended. As with other highly active corticosteroids, therapy should be discontinued when control has been achieved. If no improvement is seen within 2 weeks, reassessment of the diagnosis may be necessary.</IndicationAndUsage>
    <Description>Clobetasol Propionate Cream and Ointment USP, 0.05% contain the active compound clobetasol propionate, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate is (11ß,16ß)-21-chloro-9- fluoro-11-hydroxy-16-methyl-17-(1-oxopropoxy)-pregna-1,4- diene-3,20-dione, and it has the following structural formula. Clobetasol propionate has the molecular formula C25H32CIFO5 and a molecular weight of 467. It is a white to cream-colored crystalline powder insoluble in water. Clobetasol propionate cream contains clobetasol propionate 0.5 mg/g in a cream base composed of cetyl alcohol, citric acid, glycol stearate, lanolin oil, methylparaben, PEG-8 stearate, polysorbate 60, propylene glycol, propylparaben, purified water, sodium citrate, stearyl alcohol, and white petrolatum. Sodium hydroxide may be used to adjust pH. Clobetasol propionate ointment contains clobetasol propionate 0.5 mg/g in an ointment base composed of propylene glycol, sorbitan sesquioleate, and white petrolatum.</Description>
  </NDC>
  <NDC>
    <NDCCode>42708-174-30</NDCCode>
    <PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (42708-174-30) </PackageDescription>
    <NDC11Code>42708-0174-30</NDC11Code>
    <ProductNDC>42708-174</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Furosemide</ProprietaryName>
    <NonProprietaryName>Furosemide</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20221105</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216629</ApplicationNumber>
    <LabelerName>QPharma Inc</LabelerName>
    <SubstanceName>FUROSEMIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230605</StartMarketingDatePackage>
    <SamplePackage>Y</SamplePackage>
    <IndicationAndUsage>Edema. Furosemide tablets are indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide Tablets are particularly useful when an agent with greater diuretic potential is desired. Hypertension. Oral furosemide may be used in adults for the treatment of hypertension alone or in combination with other antihypertensive agents. Hypertensive patients who cannot be adequately controlled with thiazides will probably also not be adequately controlled with furosemide alone.</IndicationAndUsage>
    <Description>Furosemide Tablets, USP are a diuretic which is an anthranilic acid derivative. Furosemide tablets for oral administration contain furosemide as the active ingredient and the following inactive ingredients: lactose monohydrate, corn starch, pregelatinized starch, talc, colloidal silicon dioxide, magnesium stearate. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide tablets are available as white tablets for oral administration in dosage strengths of 20 mg, 40 mg and 80 mg. Furosemide is a white to off-white odorless crystalline powder. It is practically insoluble in water, sparingly soluble in alcohol, freely soluble in dilute alkali solutions and insoluble in dilute acids. The CAS Registry Number is 54-31-9. The structural formula is as follows. Meets USP dissolution test 1.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0174-3</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0174-3)</PackageDescription>
    <NDC11Code>49288-0174-03</NDC11Code>
    <ProductNDC>49288-0174</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Standardized Mite, Dermatophagoides Pteronyssinus</ProprietaryName>
    <NonProprietaryName>Standardized Mite, Dermatophagoides Pteronyssinus</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19911022</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102225</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>DERMATOPHAGOIDES PTERONYSSINUS</SubstanceName>
    <StrengthNumber>5000</StrengthNumber>
    <StrengthUnit>[AU]/mL</StrengthUnit>
    <Pharm_Classes>Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS],Insect Proteins [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>INDICATIONS AND USAGE    Standardized Mite allergenic extract is indicated for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. An orderly approach to the diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.     Mite mixtures should not be used for diagnostic skin testing. The individual mites should be used. Mite mixtures may be used for immunotherapy to treat patients who demonstrated sensi­tivity to both D. farinae and D. pteronyssinus mites. Patients who react to both D. farinae and D. pteronyssinus have demonstrated a significant cross-reactivity. Caution should be used in esca­lating treatment with mite mixtures.21PRICK-PUNCTURE TESTING: A positive control using Histamine Phosphate is important to identify those patients whose skin may not be reactive due to medications, metabolic or other rea­sons. A diluent control, if negative, would exclude false-positive reactions due to ingredients in the diluent or patients who have dermatographism.     To identify highly sensitive individuals and as a safety precaution, it is recommended that prick-puncture test using a drop of the extract concentrate (10,000 AU/ml) be performed prior to initiating very dilute intradermal testing. Prick-puncture testing is performed by placing a drop of extract concentrate on the skin and puncturing the skin through the drop with a small needle such as a bifurcated vaccinating needle. The most satisfactory sites on the back for skin testing are from the posterior axillary fold to 2.5 cm from the spinal column, and from the top of the scapula to the lower rib margins. The best areas on the arms are the volar surfaces from the axilla to 2.5 or 5 cm above the wrist, skipping the anticubital space. Glycerinated Mite extracts containing 10,000 AU/ml are recommended for prick-puncture testing. Skin reactions are based on size of erythema and wheal. For interpretation of skin reactions, refer to chart below.      Smaller, less conclusive reactions may be considered positive in conjunction with a definitive history of symptoms on exposure to the mite allergen. The more sensitive the patient the higher the probability that he/she will have symptoms related to the exposure of the offending allergen. Hence, the importance of a good patient history. Less sensitive individuals can be tested intra­dermally with an appropriately diluted extract.     A clinical study using the same patients with positive prick-puncture test (10) using the ID50EAL Method, Intradermal Dilution for 50 mm Sum of Erythema D50 Determines the Allergy Unit, has demonstrated the following:     Skin test by prick-puncture test using Standardized D. farinae Mite, 10,000 AU/ml was per­formed in 10 patients. The mean sum of erythema diameter was 76.6 mm (Range 45-104 mm). Skin test by prick-puncture test using Standardized D. pteronyssinus Mite, 10,000 AU/ml in 10 patients, the mean sum of erythema diameter was 74.7 mm (Range 43-109 mm). *C = Concentration. SINGLE DILUTION INTRADERMAL TESTING: The surface of the upper and lower arm is the usual location for skin testing. It is important that a new, sterile, disposable syringe and needle be used for each extract tested. Intracutaneous test dilutions should be made with aqueous diluent. (1) Start testing with the most dilute allergenic extract concentration. (2) A volume of 0.02-0.05 ml should be injected slowly into the superficial skin layers making a small bleb (superficial wheal). (3) For patients without a history of extreme sensitivity, a prick-puncture test of less than 2+, the initial dilu­tion for skin testing should contain 0.02 to 0.06 AU/ml (see Table I). For very sensitive patients with a prick-puncture of greater than 2+, a further dilution should be made to 0.002 to 0.006 AU/ml (see Table I). If after 20 minutes no skin reaction is obtained, continue the testing using five-fold or ten-fold incre­ments in potency until a reaction of 1+ or until the concentration of 2,000 AU (five-fold) or 1,000 AU (ten-fold) has been tested with a glycerine control. Glycerine may be used at a dilution of 0.5% as long as 0.5% glycerine produces negative control. The diluent should be tested and included in the interpretation of the skin reactions.16 INTRADERMAL TESTING–SKIN ENDPOINT TITRATION: The allergenic extracts to which the patient is sensitive, the patient's degree of sensitivity and the dose of allergen to be used in immunotherapy can be determined through the use of intracutaneous skin tests involving pro­gressive five-fold dilutions of allergenic extracts, prepared and refrigerated at 2-8° C. The critical variable is the size if the wheal and erythema produced by the intracutaneous injection of 0.01 to 0.02 ml of the test allergen producing a 4 mm diameter superficial skin wheal. For patients demon­strating a prick-puncture skin test of less than 2+, an initial screening dilution of 0.02-0.06 AU/ml is safe (see Table I). For patients demonstrating a prick-puncture skin test greater than 2+, an initial screening dilu­tion of 0.002 to 0.006 AU/ml is safe. The skin endpoint is detected by noting the dilution that pro­duces a wheal 2 mm larger than non-reacting dilutions (5 mm negative wheal) until progressive whealing with each five-fold increase in test potency occurs, i.e., a 5 mm (negative), 7 mm, 9 mm, 11 mm is the normal sequence of whealing. The 7 mm wheal would be the endpoint. The endpoint dilution is used as an initial dose concentration for immunotherapy. An endpoint dose of 0.15 ml is a safe initial dose to be followed by escalation to the optimal maximum tolerated dose for each indi­vidual.     Using Standardized D. farinae Mite, 10,000 AU/ml on 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.4). Using Standardized D. pteronyssinus Mite 10,000 AU/ml in 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.7).</IndicationAndUsage>
    <Description>DESCRIPTION     The extract is sterile and intended for dilution prior to skin testing and/or immunotherapy. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. The route of administration for immunotherapy is subcutaneous. The designation AU/ml (Allergy Units per ml) is unitage based upon the relative potency of this standardized mite extract when com­pared by ELISA competition to the F.D.A. Mite Allergenic Reference Standard labeled 10,000 AU/ml assigned on the basis of quantitative skin testing by the ID50EAL Method.1,2,3,4,5,16 Lower con­centrations (e.g. 5,000 AU/ml and 3,000 AU/ml) are prepared by dilution of stock concentrates. Mite mixtures containing equal volumes of D. farinae and D. pteronyssinus are available at 5,000 AU/ml, 2,500 AU/ml and 1,500 AU/ml.     Active allergens are described by common and scientific name on the stock concentrate con­tainer label.     INGREDIENTS: Extract of Standardized Mites contain at least 99.0% adult mites and mite stages. This product may contain trace amounts of yeast and/or pork products; sodium chloride 0.95%; sodium bicarbonate 0.24%; 50% v/v glycerine as stabilizing agent and preservative.     Following is a brief description of the standardized quality procedures applied to these extracts:         1. The source material is carefully selected from whole body adult mites and mite stages cul­tured from a medium containing no material of human origin. The source material is extracted with a saline buffer and 50% v/v glycerine.         2. Several manufacturers submitted intradermal skin test data on Biopol Laboratories mite medium extract using patients who were puncture test positive (erythema greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (erythe­ma greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive to the mite extract and who were also skin test positive to the mite medium extract were also skin tested by the puncture method with an extract of yeast (Saccharomyces sp.) and were positive.         3. A ninhydrin protein analysis is completed to compare with the standard extract.         4. Each lot is standardized against the F.D.A. reference standard extract for total biologic activ­ity by means of ELISA competition.         5. The standardized mite extract is analyzed for glycerine content to insure a minimum of 50% v/v glycerine for optimal stability during the entire dating period.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0174-4</NDCCode>
    <PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49288-0174-4)</PackageDescription>
    <NDC11Code>49288-0174-04</NDC11Code>
    <ProductNDC>49288-0174</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Standardized Mite, Dermatophagoides Pteronyssinus</ProprietaryName>
    <NonProprietaryName>Standardized Mite, Dermatophagoides Pteronyssinus</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19911022</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102225</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>DERMATOPHAGOIDES PTERONYSSINUS</SubstanceName>
    <StrengthNumber>5000</StrengthNumber>
    <StrengthUnit>[AU]/mL</StrengthUnit>
    <Pharm_Classes>Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS],Insect Proteins [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>INDICATIONS AND USAGE    Standardized Mite allergenic extract is indicated for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. An orderly approach to the diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.     Mite mixtures should not be used for diagnostic skin testing. The individual mites should be used. Mite mixtures may be used for immunotherapy to treat patients who demonstrated sensi­tivity to both D. farinae and D. pteronyssinus mites. Patients who react to both D. farinae and D. pteronyssinus have demonstrated a significant cross-reactivity. Caution should be used in esca­lating treatment with mite mixtures.21PRICK-PUNCTURE TESTING: A positive control using Histamine Phosphate is important to identify those patients whose skin may not be reactive due to medications, metabolic or other rea­sons. A diluent control, if negative, would exclude false-positive reactions due to ingredients in the diluent or patients who have dermatographism.     To identify highly sensitive individuals and as a safety precaution, it is recommended that prick-puncture test using a drop of the extract concentrate (10,000 AU/ml) be performed prior to initiating very dilute intradermal testing. Prick-puncture testing is performed by placing a drop of extract concentrate on the skin and puncturing the skin through the drop with a small needle such as a bifurcated vaccinating needle. The most satisfactory sites on the back for skin testing are from the posterior axillary fold to 2.5 cm from the spinal column, and from the top of the scapula to the lower rib margins. The best areas on the arms are the volar surfaces from the axilla to 2.5 or 5 cm above the wrist, skipping the anticubital space. Glycerinated Mite extracts containing 10,000 AU/ml are recommended for prick-puncture testing. Skin reactions are based on size of erythema and wheal. For interpretation of skin reactions, refer to chart below.      Smaller, less conclusive reactions may be considered positive in conjunction with a definitive history of symptoms on exposure to the mite allergen. The more sensitive the patient the higher the probability that he/she will have symptoms related to the exposure of the offending allergen. Hence, the importance of a good patient history. Less sensitive individuals can be tested intra­dermally with an appropriately diluted extract.     A clinical study using the same patients with positive prick-puncture test (10) using the ID50EAL Method, Intradermal Dilution for 50 mm Sum of Erythema D50 Determines the Allergy Unit, has demonstrated the following:     Skin test by prick-puncture test using Standardized D. farinae Mite, 10,000 AU/ml was per­formed in 10 patients. The mean sum of erythema diameter was 76.6 mm (Range 45-104 mm). Skin test by prick-puncture test using Standardized D. pteronyssinus Mite, 10,000 AU/ml in 10 patients, the mean sum of erythema diameter was 74.7 mm (Range 43-109 mm). *C = Concentration. SINGLE DILUTION INTRADERMAL TESTING: The surface of the upper and lower arm is the usual location for skin testing. It is important that a new, sterile, disposable syringe and needle be used for each extract tested. Intracutaneous test dilutions should be made with aqueous diluent. (1) Start testing with the most dilute allergenic extract concentration. (2) A volume of 0.02-0.05 ml should be injected slowly into the superficial skin layers making a small bleb (superficial wheal). (3) For patients without a history of extreme sensitivity, a prick-puncture test of less than 2+, the initial dilu­tion for skin testing should contain 0.02 to 0.06 AU/ml (see Table I). For very sensitive patients with a prick-puncture of greater than 2+, a further dilution should be made to 0.002 to 0.006 AU/ml (see Table I). If after 20 minutes no skin reaction is obtained, continue the testing using five-fold or ten-fold incre­ments in potency until a reaction of 1+ or until the concentration of 2,000 AU (five-fold) or 1,000 AU (ten-fold) has been tested with a glycerine control. Glycerine may be used at a dilution of 0.5% as long as 0.5% glycerine produces negative control. The diluent should be tested and included in the interpretation of the skin reactions.16 INTRADERMAL TESTING–SKIN ENDPOINT TITRATION: The allergenic extracts to which the patient is sensitive, the patient's degree of sensitivity and the dose of allergen to be used in immunotherapy can be determined through the use of intracutaneous skin tests involving pro­gressive five-fold dilutions of allergenic extracts, prepared and refrigerated at 2-8° C. The critical variable is the size if the wheal and erythema produced by the intracutaneous injection of 0.01 to 0.02 ml of the test allergen producing a 4 mm diameter superficial skin wheal. For patients demon­strating a prick-puncture skin test of less than 2+, an initial screening dilution of 0.02-0.06 AU/ml is safe (see Table I). For patients demonstrating a prick-puncture skin test greater than 2+, an initial screening dilu­tion of 0.002 to 0.006 AU/ml is safe. The skin endpoint is detected by noting the dilution that pro­duces a wheal 2 mm larger than non-reacting dilutions (5 mm negative wheal) until progressive whealing with each five-fold increase in test potency occurs, i.e., a 5 mm (negative), 7 mm, 9 mm, 11 mm is the normal sequence of whealing. The 7 mm wheal would be the endpoint. The endpoint dilution is used as an initial dose concentration for immunotherapy. An endpoint dose of 0.15 ml is a safe initial dose to be followed by escalation to the optimal maximum tolerated dose for each indi­vidual.     Using Standardized D. farinae Mite, 10,000 AU/ml on 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.4). Using Standardized D. pteronyssinus Mite 10,000 AU/ml in 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.7).</IndicationAndUsage>
    <Description>DESCRIPTION     The extract is sterile and intended for dilution prior to skin testing and/or immunotherapy. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. The route of administration for immunotherapy is subcutaneous. The designation AU/ml (Allergy Units per ml) is unitage based upon the relative potency of this standardized mite extract when com­pared by ELISA competition to the F.D.A. Mite Allergenic Reference Standard labeled 10,000 AU/ml assigned on the basis of quantitative skin testing by the ID50EAL Method.1,2,3,4,5,16 Lower con­centrations (e.g. 5,000 AU/ml and 3,000 AU/ml) are prepared by dilution of stock concentrates. Mite mixtures containing equal volumes of D. farinae and D. pteronyssinus are available at 5,000 AU/ml, 2,500 AU/ml and 1,500 AU/ml.     Active allergens are described by common and scientific name on the stock concentrate con­tainer label.     INGREDIENTS: Extract of Standardized Mites contain at least 99.0% adult mites and mite stages. This product may contain trace amounts of yeast and/or pork products; sodium chloride 0.95%; sodium bicarbonate 0.24%; 50% v/v glycerine as stabilizing agent and preservative.     Following is a brief description of the standardized quality procedures applied to these extracts:         1. The source material is carefully selected from whole body adult mites and mite stages cul­tured from a medium containing no material of human origin. The source material is extracted with a saline buffer and 50% v/v glycerine.         2. Several manufacturers submitted intradermal skin test data on Biopol Laboratories mite medium extract using patients who were puncture test positive (erythema greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (erythe­ma greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive to the mite extract and who were also skin test positive to the mite medium extract were also skin tested by the puncture method with an extract of yeast (Saccharomyces sp.) and were positive.         3. A ninhydrin protein analysis is completed to compare with the standard extract.         4. Each lot is standardized against the F.D.A. reference standard extract for total biologic activ­ity by means of ELISA competition.         5. The standardized mite extract is analyzed for glycerine content to insure a minimum of 50% v/v glycerine for optimal stability during the entire dating period.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0174-5</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49288-0174-5)</PackageDescription>
    <NDC11Code>49288-0174-05</NDC11Code>
    <ProductNDC>49288-0174</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Standardized Mite, Dermatophagoides Pteronyssinus</ProprietaryName>
    <NonProprietaryName>Standardized Mite, Dermatophagoides Pteronyssinus</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19911022</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102225</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>DERMATOPHAGOIDES PTERONYSSINUS</SubstanceName>
    <StrengthNumber>5000</StrengthNumber>
    <StrengthUnit>[AU]/mL</StrengthUnit>
    <Pharm_Classes>Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS],Insect Proteins [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>INDICATIONS AND USAGE    Standardized Mite allergenic extract is indicated for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. An orderly approach to the diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.     Mite mixtures should not be used for diagnostic skin testing. The individual mites should be used. Mite mixtures may be used for immunotherapy to treat patients who demonstrated sensi­tivity to both D. farinae and D. pteronyssinus mites. Patients who react to both D. farinae and D. pteronyssinus have demonstrated a significant cross-reactivity. Caution should be used in esca­lating treatment with mite mixtures.21PRICK-PUNCTURE TESTING: A positive control using Histamine Phosphate is important to identify those patients whose skin may not be reactive due to medications, metabolic or other rea­sons. A diluent control, if negative, would exclude false-positive reactions due to ingredients in the diluent or patients who have dermatographism.     To identify highly sensitive individuals and as a safety precaution, it is recommended that prick-puncture test using a drop of the extract concentrate (10,000 AU/ml) be performed prior to initiating very dilute intradermal testing. Prick-puncture testing is performed by placing a drop of extract concentrate on the skin and puncturing the skin through the drop with a small needle such as a bifurcated vaccinating needle. The most satisfactory sites on the back for skin testing are from the posterior axillary fold to 2.5 cm from the spinal column, and from the top of the scapula to the lower rib margins. The best areas on the arms are the volar surfaces from the axilla to 2.5 or 5 cm above the wrist, skipping the anticubital space. Glycerinated Mite extracts containing 10,000 AU/ml are recommended for prick-puncture testing. Skin reactions are based on size of erythema and wheal. For interpretation of skin reactions, refer to chart below.      Smaller, less conclusive reactions may be considered positive in conjunction with a definitive history of symptoms on exposure to the mite allergen. The more sensitive the patient the higher the probability that he/she will have symptoms related to the exposure of the offending allergen. Hence, the importance of a good patient history. Less sensitive individuals can be tested intra­dermally with an appropriately diluted extract.     A clinical study using the same patients with positive prick-puncture test (10) using the ID50EAL Method, Intradermal Dilution for 50 mm Sum of Erythema D50 Determines the Allergy Unit, has demonstrated the following:     Skin test by prick-puncture test using Standardized D. farinae Mite, 10,000 AU/ml was per­formed in 10 patients. The mean sum of erythema diameter was 76.6 mm (Range 45-104 mm). Skin test by prick-puncture test using Standardized D. pteronyssinus Mite, 10,000 AU/ml in 10 patients, the mean sum of erythema diameter was 74.7 mm (Range 43-109 mm). *C = Concentration. SINGLE DILUTION INTRADERMAL TESTING: The surface of the upper and lower arm is the usual location for skin testing. It is important that a new, sterile, disposable syringe and needle be used for each extract tested. Intracutaneous test dilutions should be made with aqueous diluent. (1) Start testing with the most dilute allergenic extract concentration. (2) A volume of 0.02-0.05 ml should be injected slowly into the superficial skin layers making a small bleb (superficial wheal). (3) For patients without a history of extreme sensitivity, a prick-puncture test of less than 2+, the initial dilu­tion for skin testing should contain 0.02 to 0.06 AU/ml (see Table I). For very sensitive patients with a prick-puncture of greater than 2+, a further dilution should be made to 0.002 to 0.006 AU/ml (see Table I). If after 20 minutes no skin reaction is obtained, continue the testing using five-fold or ten-fold incre­ments in potency until a reaction of 1+ or until the concentration of 2,000 AU (five-fold) or 1,000 AU (ten-fold) has been tested with a glycerine control. Glycerine may be used at a dilution of 0.5% as long as 0.5% glycerine produces negative control. The diluent should be tested and included in the interpretation of the skin reactions.16 INTRADERMAL TESTING–SKIN ENDPOINT TITRATION: The allergenic extracts to which the patient is sensitive, the patient's degree of sensitivity and the dose of allergen to be used in immunotherapy can be determined through the use of intracutaneous skin tests involving pro­gressive five-fold dilutions of allergenic extracts, prepared and refrigerated at 2-8° C. The critical variable is the size if the wheal and erythema produced by the intracutaneous injection of 0.01 to 0.02 ml of the test allergen producing a 4 mm diameter superficial skin wheal. For patients demon­strating a prick-puncture skin test of less than 2+, an initial screening dilution of 0.02-0.06 AU/ml is safe (see Table I). For patients demonstrating a prick-puncture skin test greater than 2+, an initial screening dilu­tion of 0.002 to 0.006 AU/ml is safe. The skin endpoint is detected by noting the dilution that pro­duces a wheal 2 mm larger than non-reacting dilutions (5 mm negative wheal) until progressive whealing with each five-fold increase in test potency occurs, i.e., a 5 mm (negative), 7 mm, 9 mm, 11 mm is the normal sequence of whealing. The 7 mm wheal would be the endpoint. The endpoint dilution is used as an initial dose concentration for immunotherapy. An endpoint dose of 0.15 ml is a safe initial dose to be followed by escalation to the optimal maximum tolerated dose for each indi­vidual.     Using Standardized D. farinae Mite, 10,000 AU/ml on 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.4). Using Standardized D. pteronyssinus Mite 10,000 AU/ml in 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.7).</IndicationAndUsage>
    <Description>DESCRIPTION     The extract is sterile and intended for dilution prior to skin testing and/or immunotherapy. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. The route of administration for immunotherapy is subcutaneous. The designation AU/ml (Allergy Units per ml) is unitage based upon the relative potency of this standardized mite extract when com­pared by ELISA competition to the F.D.A. Mite Allergenic Reference Standard labeled 10,000 AU/ml assigned on the basis of quantitative skin testing by the ID50EAL Method.1,2,3,4,5,16 Lower con­centrations (e.g. 5,000 AU/ml and 3,000 AU/ml) are prepared by dilution of stock concentrates. Mite mixtures containing equal volumes of D. farinae and D. pteronyssinus are available at 5,000 AU/ml, 2,500 AU/ml and 1,500 AU/ml.     Active allergens are described by common and scientific name on the stock concentrate con­tainer label.     INGREDIENTS: Extract of Standardized Mites contain at least 99.0% adult mites and mite stages. This product may contain trace amounts of yeast and/or pork products; sodium chloride 0.95%; sodium bicarbonate 0.24%; 50% v/v glycerine as stabilizing agent and preservative.     Following is a brief description of the standardized quality procedures applied to these extracts:         1. The source material is carefully selected from whole body adult mites and mite stages cul­tured from a medium containing no material of human origin. The source material is extracted with a saline buffer and 50% v/v glycerine.         2. Several manufacturers submitted intradermal skin test data on Biopol Laboratories mite medium extract using patients who were puncture test positive (erythema greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (erythe­ma greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive to the mite extract and who were also skin test positive to the mite medium extract were also skin tested by the puncture method with an extract of yeast (Saccharomyces sp.) and were positive.         3. A ninhydrin protein analysis is completed to compare with the standard extract.         4. Each lot is standardized against the F.D.A. reference standard extract for total biologic activ­ity by means of ELISA competition.         5. The standardized mite extract is analyzed for glycerine content to insure a minimum of 50% v/v glycerine for optimal stability during the entire dating period.</Description>
  </NDC>
</NDCList>