{
"NDC": [
{
"NDCCode": "71335-0175-9",
"PackageDescription": "56 TABLET in 1 BOTTLE (71335-0175-9) ",
"NDC11Code": "71335-0175-09",
"ProductNDC": "71335-0175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diethylpropion Hydrochloride",
"NonProprietaryName": "Diethylpropion Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110718",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200177",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "DIETHYLPROPION HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2024-10-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20111021",
"SamplePackage": "N",
"IndicationAndUsage": "Diethylpropion hydrochloride tablets USP, 25 mg are indicated in the management of exogenous obesity as a short-term adjunct (a few weeks) in a regimen of weight reduction based on caloric restriction in patients with an initial body mass index (BMI) of 30 kg/m2 or higher and who have not responded to appropriate weight reducing regimen (diet and/or exercise) alone. Below is a chart of BMI based on various heights and weights. BMI is calculated by taking the patient's weight, in kilograms (kg), divided by the patient's height, in meters (m), squared. Metric conversions are as follows: pounds divided by 2.2 = kg; inches × 0.0254 = meters. The usefulness of agents of this class (See CLINICAL PHARMACOLOGY) should be measured against possible risk factors inherent in their use such as those described below. Diethylpropion hydrochloride tablets USP, 25 mg are indicated for use as monotherapy only.",
"Description": "Diethylpropion Hydrochloride Tablets USP, 25 mg are available for oral administration as tablets containing 25 mg diethylpropion hydrochloride, USP. The inactive ingredients in each tablet are: microcrystalline cellulose, lactose monohydrate, mannitol, tartaric acid, povidone, talc, and zinc stearate. Diethylpropion hydrochloride is a sympathomimetic agent. The chemical name for diethylpropion hydrochloride is 1-phenyl-2-diethyl-amino-1-propanone hydrochloride. Its chemical structure is."
},
{
"NDCCode": "17856-0175-9",
"PackageDescription": "5 BOX, UNIT-DOSE in 1 SYRINGE (17856-0175-9) > 120 SYRINGE in 1 BOX, UNIT-DOSE (17856-0175-7) > 2.5 mL in 1 SYRINGE (17856-0175-8) ",
"NDC11Code": "17856-0175-09",
"ProductNDC": "17856-0175",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Acetaminophen",
"NonProprietaryName": "Acetaminophen",
"DosageFormName": "ELIXIR",
"RouteName": "ORAL",
"StartMarketingDate": "20210518",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part343",
"LabelerName": "ATLANTIC BIOLOGICALS CORP.",
"SubstanceName": "ACETAMINOPHEN",
"StrengthNumber": "160",
"StrengthUnit": "mg/5mL",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20221025",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce fever and for the temporary relief of minor aches and pains due to: 1 headache , 2 muscular aches , 3 backache , 4 minor pain of arthritis , 5 the common cold, 6 toothache , 7 premenstrual and menstrual cramps. ."
},
{
"NDCCode": "70000-0175-9",
"PackageDescription": "1 BOTTLE in 1 CARTON (70000-0175-9) / 250 TABLET, FILM COATED in 1 BOTTLE",
"NDC11Code": "70000-0175-09",
"ProductNDC": "70000-0175",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Leader Ibuprofen",
"NonProprietaryName": "Ibuprofen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20161130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA072096",
"LabelerName": "Cardinal Health 110, LLC. dba Leader",
"SubstanceName": "IBUPROFEN",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240129",
"EndMarketingDatePackage": "20261031",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves minor aches and pains due to:headache muscular aches minor pain of arthritis toothachebackache the common cold menstrual cramps. temporarily reduces fever."
},
{
"NDCCode": "71335-0175-0",
"PackageDescription": "42 TABLET in 1 BOTTLE (71335-0175-0) ",
"NDC11Code": "71335-0175-00",
"ProductNDC": "71335-0175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diethylpropion Hydrochloride",
"NonProprietaryName": "Diethylpropion Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110718",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200177",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "DIETHYLPROPION HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2024-10-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20111021",
"SamplePackage": "N",
"IndicationAndUsage": "Diethylpropion hydrochloride tablets USP, 25 mg are indicated in the management of exogenous obesity as a short-term adjunct (a few weeks) in a regimen of weight reduction based on caloric restriction in patients with an initial body mass index (BMI) of 30 kg/m2 or higher and who have not responded to appropriate weight reducing regimen (diet and/or exercise) alone. Below is a chart of BMI based on various heights and weights. BMI is calculated by taking the patient's weight, in kilograms (kg), divided by the patient's height, in meters (m), squared. Metric conversions are as follows: pounds divided by 2.2 = kg; inches × 0.0254 = meters. The usefulness of agents of this class (See CLINICAL PHARMACOLOGY) should be measured against possible risk factors inherent in their use such as those described below. Diethylpropion hydrochloride tablets USP, 25 mg are indicated for use as monotherapy only.",
"Description": "Diethylpropion Hydrochloride Tablets USP, 25 mg are available for oral administration as tablets containing 25 mg diethylpropion hydrochloride, USP. The inactive ingredients in each tablet are: microcrystalline cellulose, lactose monohydrate, mannitol, tartaric acid, povidone, talc, and zinc stearate. Diethylpropion hydrochloride is a sympathomimetic agent. The chemical name for diethylpropion hydrochloride is 1-phenyl-2-diethyl-amino-1-propanone hydrochloride. Its chemical structure is."
},
{
"NDCCode": "71335-0175-1",
"PackageDescription": "28 TABLET in 1 BOTTLE (71335-0175-1) ",
"NDC11Code": "71335-0175-01",
"ProductNDC": "71335-0175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diethylpropion Hydrochloride",
"NonProprietaryName": "Diethylpropion Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110718",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200177",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "DIETHYLPROPION HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2024-10-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20111021",
"SamplePackage": "N",
"IndicationAndUsage": "Diethylpropion hydrochloride tablets USP, 25 mg are indicated in the management of exogenous obesity as a short-term adjunct (a few weeks) in a regimen of weight reduction based on caloric restriction in patients with an initial body mass index (BMI) of 30 kg/m2 or higher and who have not responded to appropriate weight reducing regimen (diet and/or exercise) alone. Below is a chart of BMI based on various heights and weights. BMI is calculated by taking the patient's weight, in kilograms (kg), divided by the patient's height, in meters (m), squared. Metric conversions are as follows: pounds divided by 2.2 = kg; inches × 0.0254 = meters. The usefulness of agents of this class (See CLINICAL PHARMACOLOGY) should be measured against possible risk factors inherent in their use such as those described below. Diethylpropion hydrochloride tablets USP, 25 mg are indicated for use as monotherapy only.",
"Description": "Diethylpropion Hydrochloride Tablets USP, 25 mg are available for oral administration as tablets containing 25 mg diethylpropion hydrochloride, USP. The inactive ingredients in each tablet are: microcrystalline cellulose, lactose monohydrate, mannitol, tartaric acid, povidone, talc, and zinc stearate. Diethylpropion hydrochloride is a sympathomimetic agent. The chemical name for diethylpropion hydrochloride is 1-phenyl-2-diethyl-amino-1-propanone hydrochloride. Its chemical structure is."
},
{
"NDCCode": "71335-0175-2",
"PackageDescription": "90 TABLET in 1 BOTTLE (71335-0175-2) ",
"NDC11Code": "71335-0175-02",
"ProductNDC": "71335-0175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diethylpropion Hydrochloride",
"NonProprietaryName": "Diethylpropion Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110718",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200177",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "DIETHYLPROPION HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2024-10-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20111021",
"SamplePackage": "N",
"IndicationAndUsage": "Diethylpropion hydrochloride tablets USP, 25 mg are indicated in the management of exogenous obesity as a short-term adjunct (a few weeks) in a regimen of weight reduction based on caloric restriction in patients with an initial body mass index (BMI) of 30 kg/m2 or higher and who have not responded to appropriate weight reducing regimen (diet and/or exercise) alone. Below is a chart of BMI based on various heights and weights. BMI is calculated by taking the patient's weight, in kilograms (kg), divided by the patient's height, in meters (m), squared. Metric conversions are as follows: pounds divided by 2.2 = kg; inches × 0.0254 = meters. The usefulness of agents of this class (See CLINICAL PHARMACOLOGY) should be measured against possible risk factors inherent in their use such as those described below. Diethylpropion hydrochloride tablets USP, 25 mg are indicated for use as monotherapy only.",
"Description": "Diethylpropion Hydrochloride Tablets USP, 25 mg are available for oral administration as tablets containing 25 mg diethylpropion hydrochloride, USP. The inactive ingredients in each tablet are: microcrystalline cellulose, lactose monohydrate, mannitol, tartaric acid, povidone, talc, and zinc stearate. Diethylpropion hydrochloride is a sympathomimetic agent. The chemical name for diethylpropion hydrochloride is 1-phenyl-2-diethyl-amino-1-propanone hydrochloride. Its chemical structure is."
},
{
"NDCCode": "71335-0175-3",
"PackageDescription": "30 TABLET in 1 BOTTLE (71335-0175-3) ",
"NDC11Code": "71335-0175-03",
"ProductNDC": "71335-0175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diethylpropion Hydrochloride",
"NonProprietaryName": "Diethylpropion Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110718",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200177",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "DIETHYLPROPION HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2024-10-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20111021",
"SamplePackage": "N",
"IndicationAndUsage": "Diethylpropion hydrochloride tablets USP, 25 mg are indicated in the management of exogenous obesity as a short-term adjunct (a few weeks) in a regimen of weight reduction based on caloric restriction in patients with an initial body mass index (BMI) of 30 kg/m2 or higher and who have not responded to appropriate weight reducing regimen (diet and/or exercise) alone. Below is a chart of BMI based on various heights and weights. BMI is calculated by taking the patient's weight, in kilograms (kg), divided by the patient's height, in meters (m), squared. Metric conversions are as follows: pounds divided by 2.2 = kg; inches × 0.0254 = meters. The usefulness of agents of this class (See CLINICAL PHARMACOLOGY) should be measured against possible risk factors inherent in their use such as those described below. Diethylpropion hydrochloride tablets USP, 25 mg are indicated for use as monotherapy only.",
"Description": "Diethylpropion Hydrochloride Tablets USP, 25 mg are available for oral administration as tablets containing 25 mg diethylpropion hydrochloride, USP. The inactive ingredients in each tablet are: microcrystalline cellulose, lactose monohydrate, mannitol, tartaric acid, povidone, talc, and zinc stearate. Diethylpropion hydrochloride is a sympathomimetic agent. The chemical name for diethylpropion hydrochloride is 1-phenyl-2-diethyl-amino-1-propanone hydrochloride. Its chemical structure is."
},
{
"NDCCode": "71335-0175-4",
"PackageDescription": "14 TABLET in 1 BOTTLE (71335-0175-4) ",
"NDC11Code": "71335-0175-04",
"ProductNDC": "71335-0175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diethylpropion Hydrochloride",
"NonProprietaryName": "Diethylpropion Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110718",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200177",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "DIETHYLPROPION HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2024-10-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20111021",
"SamplePackage": "N",
"IndicationAndUsage": "Diethylpropion hydrochloride tablets USP, 25 mg are indicated in the management of exogenous obesity as a short-term adjunct (a few weeks) in a regimen of weight reduction based on caloric restriction in patients with an initial body mass index (BMI) of 30 kg/m2 or higher and who have not responded to appropriate weight reducing regimen (diet and/or exercise) alone. Below is a chart of BMI based on various heights and weights. BMI is calculated by taking the patient's weight, in kilograms (kg), divided by the patient's height, in meters (m), squared. Metric conversions are as follows: pounds divided by 2.2 = kg; inches × 0.0254 = meters. The usefulness of agents of this class (See CLINICAL PHARMACOLOGY) should be measured against possible risk factors inherent in their use such as those described below. Diethylpropion hydrochloride tablets USP, 25 mg are indicated for use as monotherapy only.",
"Description": "Diethylpropion Hydrochloride Tablets USP, 25 mg are available for oral administration as tablets containing 25 mg diethylpropion hydrochloride, USP. The inactive ingredients in each tablet are: microcrystalline cellulose, lactose monohydrate, mannitol, tartaric acid, povidone, talc, and zinc stearate. Diethylpropion hydrochloride is a sympathomimetic agent. The chemical name for diethylpropion hydrochloride is 1-phenyl-2-diethyl-amino-1-propanone hydrochloride. Its chemical structure is."
},
{
"NDCCode": "71335-0175-5",
"PackageDescription": "21 TABLET in 1 BOTTLE (71335-0175-5) ",
"NDC11Code": "71335-0175-05",
"ProductNDC": "71335-0175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diethylpropion Hydrochloride",
"NonProprietaryName": "Diethylpropion Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110718",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200177",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "DIETHYLPROPION HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2024-10-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20111021",
"SamplePackage": "N",
"IndicationAndUsage": "Diethylpropion hydrochloride tablets USP, 25 mg are indicated in the management of exogenous obesity as a short-term adjunct (a few weeks) in a regimen of weight reduction based on caloric restriction in patients with an initial body mass index (BMI) of 30 kg/m2 or higher and who have not responded to appropriate weight reducing regimen (diet and/or exercise) alone. Below is a chart of BMI based on various heights and weights. BMI is calculated by taking the patient's weight, in kilograms (kg), divided by the patient's height, in meters (m), squared. Metric conversions are as follows: pounds divided by 2.2 = kg; inches × 0.0254 = meters. The usefulness of agents of this class (See CLINICAL PHARMACOLOGY) should be measured against possible risk factors inherent in their use such as those described below. Diethylpropion hydrochloride tablets USP, 25 mg are indicated for use as monotherapy only.",
"Description": "Diethylpropion Hydrochloride Tablets USP, 25 mg are available for oral administration as tablets containing 25 mg diethylpropion hydrochloride, USP. The inactive ingredients in each tablet are: microcrystalline cellulose, lactose monohydrate, mannitol, tartaric acid, povidone, talc, and zinc stearate. Diethylpropion hydrochloride is a sympathomimetic agent. The chemical name for diethylpropion hydrochloride is 1-phenyl-2-diethyl-amino-1-propanone hydrochloride. Its chemical structure is."
},
{
"NDCCode": "71335-0175-6",
"PackageDescription": "7 TABLET in 1 BOTTLE (71335-0175-6) ",
"NDC11Code": "71335-0175-06",
"ProductNDC": "71335-0175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diethylpropion Hydrochloride",
"NonProprietaryName": "Diethylpropion Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110718",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200177",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "DIETHYLPROPION HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2024-10-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20111021",
"SamplePackage": "N",
"IndicationAndUsage": "Diethylpropion hydrochloride tablets USP, 25 mg are indicated in the management of exogenous obesity as a short-term adjunct (a few weeks) in a regimen of weight reduction based on caloric restriction in patients with an initial body mass index (BMI) of 30 kg/m2 or higher and who have not responded to appropriate weight reducing regimen (diet and/or exercise) alone. Below is a chart of BMI based on various heights and weights. BMI is calculated by taking the patient's weight, in kilograms (kg), divided by the patient's height, in meters (m), squared. Metric conversions are as follows: pounds divided by 2.2 = kg; inches × 0.0254 = meters. The usefulness of agents of this class (See CLINICAL PHARMACOLOGY) should be measured against possible risk factors inherent in their use such as those described below. Diethylpropion hydrochloride tablets USP, 25 mg are indicated for use as monotherapy only.",
"Description": "Diethylpropion Hydrochloride Tablets USP, 25 mg are available for oral administration as tablets containing 25 mg diethylpropion hydrochloride, USP. The inactive ingredients in each tablet are: microcrystalline cellulose, lactose monohydrate, mannitol, tartaric acid, povidone, talc, and zinc stearate. Diethylpropion hydrochloride is a sympathomimetic agent. The chemical name for diethylpropion hydrochloride is 1-phenyl-2-diethyl-amino-1-propanone hydrochloride. Its chemical structure is."
},
{
"NDCCode": "71335-0175-7",
"PackageDescription": "60 TABLET in 1 BOTTLE (71335-0175-7) ",
"NDC11Code": "71335-0175-07",
"ProductNDC": "71335-0175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diethylpropion Hydrochloride",
"NonProprietaryName": "Diethylpropion Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110718",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200177",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "DIETHYLPROPION HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2024-10-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20111021",
"SamplePackage": "N",
"IndicationAndUsage": "Diethylpropion hydrochloride tablets USP, 25 mg are indicated in the management of exogenous obesity as a short-term adjunct (a few weeks) in a regimen of weight reduction based on caloric restriction in patients with an initial body mass index (BMI) of 30 kg/m2 or higher and who have not responded to appropriate weight reducing regimen (diet and/or exercise) alone. Below is a chart of BMI based on various heights and weights. BMI is calculated by taking the patient's weight, in kilograms (kg), divided by the patient's height, in meters (m), squared. Metric conversions are as follows: pounds divided by 2.2 = kg; inches × 0.0254 = meters. The usefulness of agents of this class (See CLINICAL PHARMACOLOGY) should be measured against possible risk factors inherent in their use such as those described below. Diethylpropion hydrochloride tablets USP, 25 mg are indicated for use as monotherapy only.",
"Description": "Diethylpropion Hydrochloride Tablets USP, 25 mg are available for oral administration as tablets containing 25 mg diethylpropion hydrochloride, USP. The inactive ingredients in each tablet are: microcrystalline cellulose, lactose monohydrate, mannitol, tartaric acid, povidone, talc, and zinc stearate. Diethylpropion hydrochloride is a sympathomimetic agent. The chemical name for diethylpropion hydrochloride is 1-phenyl-2-diethyl-amino-1-propanone hydrochloride. Its chemical structure is."
},
{
"NDCCode": "71335-0175-8",
"PackageDescription": "84 TABLET in 1 BOTTLE (71335-0175-8) ",
"NDC11Code": "71335-0175-08",
"ProductNDC": "71335-0175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diethylpropion Hydrochloride",
"NonProprietaryName": "Diethylpropion Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110718",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200177",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "DIETHYLPROPION HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2024-10-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20111021",
"SamplePackage": "N",
"IndicationAndUsage": "Diethylpropion hydrochloride tablets USP, 25 mg are indicated in the management of exogenous obesity as a short-term adjunct (a few weeks) in a regimen of weight reduction based on caloric restriction in patients with an initial body mass index (BMI) of 30 kg/m2 or higher and who have not responded to appropriate weight reducing regimen (diet and/or exercise) alone. Below is a chart of BMI based on various heights and weights. BMI is calculated by taking the patient's weight, in kilograms (kg), divided by the patient's height, in meters (m), squared. Metric conversions are as follows: pounds divided by 2.2 = kg; inches × 0.0254 = meters. The usefulness of agents of this class (See CLINICAL PHARMACOLOGY) should be measured against possible risk factors inherent in their use such as those described below. Diethylpropion hydrochloride tablets USP, 25 mg are indicated for use as monotherapy only.",
"Description": "Diethylpropion Hydrochloride Tablets USP, 25 mg are available for oral administration as tablets containing 25 mg diethylpropion hydrochloride, USP. The inactive ingredients in each tablet are: microcrystalline cellulose, lactose monohydrate, mannitol, tartaric acid, povidone, talc, and zinc stearate. Diethylpropion hydrochloride is a sympathomimetic agent. The chemical name for diethylpropion hydrochloride is 1-phenyl-2-diethyl-amino-1-propanone hydrochloride. Its chemical structure is."
},
{
"NDCCode": "0316-0175-15",
"PackageDescription": "1 TUBE in 1 CARTON (0316-0175-15) / 15 g in 1 TUBE",
"NDC11Code": "00316-0175-15",
"ProductNDC": "0316-0175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Triderm",
"NonProprietaryName": "Triamcinolone Acetonide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "19840319",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088042",
"LabelerName": "Crown Laboratories",
"SubstanceName": "TRIAMCINOLONE ACETONIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150325",
"SamplePackage": "N",
"IndicationAndUsage": "Topical corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.",
"Description": "The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. Triamcinolone acetonide is a member of this class. Triamcinolone acetonide is chemically pregna-1,4-diene-3,20-dione, 9-fluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis-(oxy)]-(11β, 16α)- with the empirical formula C 24H 31FO 6 and molecular weight 434.50. Its structural formula is:. Each gram of Triderm (Triamcinolone Acetonide Cream USP), 0.025% contains 0.25 mg triamcinolone acetonide USP in a cream base consisting of purified water, emulsifying wax, mineral oil, propylene glycol, sorbitol solution, cetyl palmitate, sorbic acid, and potassium sorbate. Each gram of Triderm (Triamcinolone Acetonide Cream USP), 0.1% contains 1 mg triamcinolone acetonide USP in a cream base consisting of purified water, emulsifying wax, mineral oil, propylene glycol, sorbitol solution, cetyl palmitate, sorbic acid, and potassium sorbate. Each gram of Triderm (Triamcinolone Acetonide Cream USP), 0.5% contains 5 mg triamcinolone acetonide USP in a cream base consisting of purified water, emulsifying wax, mineral oil, propylene glycol, sorbitol solution, cetyl palmitate, sorbic acid, and potassium sorbate."
},
{
"NDCCode": "0316-0175-16",
"PackageDescription": "1 JAR in 1 CARTON (0316-0175-16) / 454 g in 1 JAR",
"NDC11Code": "00316-0175-16",
"ProductNDC": "0316-0175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Triderm",
"NonProprietaryName": "Triamcinolone Acetonide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "19840319",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088042",
"LabelerName": "Crown Laboratories",
"SubstanceName": "TRIAMCINOLONE ACETONIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170901",
"SamplePackage": "N",
"IndicationAndUsage": "Topical corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.",
"Description": "The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. Triamcinolone acetonide is a member of this class. Triamcinolone acetonide is chemically pregna-1,4-diene-3,20-dione, 9-fluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis-(oxy)]-(11β, 16α)- with the empirical formula C 24H 31FO 6 and molecular weight 434.50. Its structural formula is:. Each gram of Triderm (Triamcinolone Acetonide Cream USP), 0.025% contains 0.25 mg triamcinolone acetonide USP in a cream base consisting of purified water, emulsifying wax, mineral oil, propylene glycol, sorbitol solution, cetyl palmitate, sorbic acid, and potassium sorbate. Each gram of Triderm (Triamcinolone Acetonide Cream USP), 0.1% contains 1 mg triamcinolone acetonide USP in a cream base consisting of purified water, emulsifying wax, mineral oil, propylene glycol, sorbitol solution, cetyl palmitate, sorbic acid, and potassium sorbate. Each gram of Triderm (Triamcinolone Acetonide Cream USP), 0.5% contains 5 mg triamcinolone acetonide USP in a cream base consisting of purified water, emulsifying wax, mineral oil, propylene glycol, sorbitol solution, cetyl palmitate, sorbic acid, and potassium sorbate."
},
{
"NDCCode": "14141-175-01",
"PackageDescription": "9 g in 1 JAR (14141-175-01) ",
"NDC11Code": "14141-0175-01",
"ProductNDC": "14141-175",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Clarite Makeup For A Cleaner Appearance Spf 30 170-n",
"NonProprietaryName": "Octinoxate, Zinc Oxide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200324",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "BEL STAR S A",
"SubstanceName": "OCTINOXATE; ZINC OXIDE",
"StrengthNumber": "7.5; 7.84",
"StrengthUnit": "g/100g; g/100g",
"Status": "Deprecated",
"LastUpdate": "2020-12-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20200324",
"SamplePackage": "N"
},
{
"NDCCode": "16590-175-05",
"PackageDescription": "5 mL in 1 BOTTLE, DROPPER (16590-175-05)",
"NDC11Code": "16590-0175-05",
"ProductNDC": "16590-175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ofloxacin",
"NonProprietaryName": "Ofloxacin",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20040514",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076615",
"LabelerName": "STAT RX LLC USA",
"SubstanceName": "OFLOXACIN",
"StrengthNumber": "3",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Quinolone Antimicrobial [EPC],Quinolones [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Ofloxacin ophthalmic solution is indicated for the treatment of infections caused by susceptible strains of the following bacteria in the conditions listed below:. *Efficacy for this organism was studied in fewer than 10 infections.",
"Description": "Ofloxacin ophthalmic solution 0.3% is a sterile ophthalmic solution. It is a fluorinated carboxyquinolone anti-infective for topical ophthalmic use. (±)-9-Fluoro-2, 3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4 benzoxazine-6-carboxylic acid. Contains. Active: ofloxacin 0.3% (3 mg/mL). Preservative: benzalkonium chloride (0.005%). Inactives: sodium chloride and purified water. May also contain hydrochloric acid and/or sodium hydroxide to adjust pH. Ofloxacin ophthalmic solution is unbuffered and formulated with a pH of 6.4 (range - 6.0 to 6.8). It has an osmolality of 300 mOsm/kg. Ofloxacin is a fluorinated 4-quinolone which differs from other fluorinated 4-quinolones in that there is a six member (pyridobenzoxazine) ring from positions 1 to 8 of the basic ring structure."
},
{
"NDCCode": "36000-175-10",
"PackageDescription": "10 VIAL in 1 PACKAGE (36000-175-10) > 1 INJECTION in 1 VIAL (36000-175-01)",
"NDC11Code": "36000-0175-10",
"ProductNDC": "36000-175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nafcillin",
"NonProprietaryName": "Nafcillin",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20120201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090560",
"LabelerName": "Claris Lifesciences, Inc.",
"SubstanceName": "NAFCILLIN SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC],Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Nafcillin is indicated in the treatment of infections caused by penicillinase-producing staphylococci which have demonstrated susceptibility to the drug. Culture and susceptibility tests should be performed initially to determine the causative organism and its susceptibility to the drug (see CLINICAL PHARMACOLOGY - Susceptibility Tests). Nafcillin may be used to initiate therapy in suspected cases of resistant staphylococcal infections prior to the availability of susceptibility test results. Nafcillin should not be used in infections caused by organisms susceptible to penicillin G. If the susceptibility tests indicate that the infection is due to an organism other than a resistant Staphylococcus, therapy should not be continued with Nafcillin for Injection, USP. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Nafcillin for Injection and other antibacterial drugs, Nafcillin for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Nafcillin for Injection, USP is a sterile semisynthetic penicillin derived from 6-amino-penicillanic acid. It is the sodium salt in a parenteral dosage form. The chemical name of nafcillin sodium is Monosodium (2S, 5R, 6R)-6-(2-ethoxy-1-naphthamido)-3, 3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate monohydrate. It is resistant to inactivation by the enzyme penicillinase (beta-lactamase). The structural formula of nafcillin sodium is as follows:. C21H21N2NaO5S H2O MW=454.48. Nafcillin for Injection, USP is available as a white to off-white crystalline dry powder for reconstitution. The reconstituted solution is a clear and colorless solution. Nafcillin for Injection contains nafcillin sodium as the monohydrate equivalent to 1 gram or 2 grams of nafcillin per vial. The sodium content is 66 mg [2.9 mEq] per gram nafcillin. This product is buffered with approximately 38 mg sodium citrate per gram."
},
{
"NDCCode": "49288-0175-1",
"PackageDescription": "2 mL in 1 VIAL, MULTI-DOSE (49288-0175-1)",
"NDC11Code": "49288-0175-01",
"ProductNDC": "49288-0175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite, Dermatophagoides Farinae",
"NonProprietaryName": "Standardized Mite, Dermatophagoides Farinae",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19911022",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102224",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "10000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS],Insect Proteins [CS],Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "INDICATIONS AND USAGE Standardized Mite allergenic extract is indicated for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. An orderly approach to the diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing. Mite mixtures should not be used for diagnostic skin testing. The individual mites should be used. Mite mixtures may be used for immunotherapy to treat patients who demonstrated sensitivity to both D. farinae and D. pteronyssinus mites. Patients who react to both D. farinae and D. pteronyssinus have demonstrated a significant cross-reactivity. Caution should be used in escalating treatment with mite mixtures.21PRICK-PUNCTURE TESTING: A positive control using Histamine Phosphate is important to identify those patients whose skin may not be reactive due to medications, metabolic or other reasons. A diluent control, if negative, would exclude false-positive reactions due to ingredients in the diluent or patients who have dermatographism. To identify highly sensitive individuals and as a safety precaution, it is recommended that prick-puncture test using a drop of the extract concentrate (10,000 AU/ml) be performed prior to initiating very dilute intradermal testing. Prick-puncture testing is performed by placing a drop of extract concentrate on the skin and puncturing the skin through the drop with a small needle such as a bifurcated vaccinating needle. The most satisfactory sites on the back for skin testing are from the posterior axillary fold to 2.5 cm from the spinal column, and from the top of the scapula to the lower rib margins. The best areas on the arms are the volar surfaces from the axilla to 2.5 or 5 cm above the wrist, skipping the anticubital space. Glycerinated Mite extracts containing 10,000 AU/ml are recommended for prick-puncture testing. Skin reactions are based on size of erythema and wheal. For interpretation of skin reactions, refer to chart below. Smaller, less conclusive reactions may be considered positive in conjunction with a definitive history of symptoms on exposure to the mite allergen. The more sensitive the patient the higher the probability that he/she will have symptoms related to the exposure of the offending allergen. Hence, the importance of a good patient history. Less sensitive individuals can be tested intradermally with an appropriately diluted extract. A clinical study using the same patients with positive prick-puncture test (10) using the ID50EAL Method, Intradermal Dilution for 50 mm Sum of Erythema D50 Determines the Allergy Unit, has demonstrated the following: Skin test by prick-puncture test using Standardized D. farinae Mite, 10,000 AU/ml was performed in 10 patients. The mean sum of erythema diameter was 76.6 mm (Range 45-104 mm). Skin test by prick-puncture test using Standardized D. pteronyssinus Mite, 10,000 AU/ml in 10 patients, the mean sum of erythema diameter was 74.7 mm (Range 43-109 mm). *C = Concentration. SINGLE DILUTION INTRADERMAL TESTING: The surface of the upper and lower arm is the usual location for skin testing. It is important that a new, sterile, disposable syringe and needle be used for each extract tested. Intracutaneous test dilutions should be made with aqueous diluent. (1) Start testing with the most dilute allergenic extract concentration. (2) A volume of 0.02-0.05 ml should be injected slowly into the superficial skin layers making a small bleb (superficial wheal). (3) For patients without a history of extreme sensitivity, a prick-puncture test of less than 2+, the initial dilution for skin testing should contain 0.02 to 0.06 AU/ml (see Table I). For very sensitive patients with a prick-puncture of greater than 2+, a further dilution should be made to 0.002 to 0.006 AU/ml (see Table I). If after 20 minutes no skin reaction is obtained, continue the testing using five-fold or ten-fold increments in potency until a reaction of 1+ or until the concentration of 2,000 AU (five-fold) or 1,000 AU (ten-fold) has been tested with a glycerine control. Glycerine may be used at a dilution of 0.5% as long as 0.5% glycerine produces negative control. The diluent should be tested and included in the interpretation of the skin reactions.16 INTRADERMAL TESTING–SKIN ENDPOINT TITRATION: The allergenic extracts to which the patient is sensitive, the patient's degree of sensitivity and the dose of allergen to be used in immunotherapy can be determined through the use of intracutaneous skin tests involving progressive five-fold dilutions of allergenic extracts, prepared and refrigerated at 2-8° C. The critical variable is the size if the wheal and erythema produced by the intracutaneous injection of 0.01 to 0.02 ml of the test allergen producing a 4 mm diameter superficial skin wheal. For patients demonstrating a prick-puncture skin test of less than 2+, an initial screening dilution of 0.02-0.06 AU/ml is safe (see Table I). For patients demonstrating a prick-puncture skin test greater than 2+, an initial screening dilution of 0.002 to 0.006 AU/ml is safe. The skin endpoint is detected by noting the dilution that produces a wheal 2 mm larger than non-reacting dilutions (5 mm negative wheal) until progressive whealing with each five-fold increase in test potency occurs, i.e., a 5 mm (negative), 7 mm, 9 mm, 11 mm is the normal sequence of whealing. The 7 mm wheal would be the endpoint. The endpoint dilution is used as an initial dose concentration for immunotherapy. An endpoint dose of 0.15 ml is a safe initial dose to be followed by escalation to the optimal maximum tolerated dose for each individual. Using Standardized D. farinae Mite, 10,000 AU/ml on 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.4). Using Standardized D. pteronyssinus Mite 10,000 AU/ml in 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.7).",
"Description": "DESCRIPTION The extract is sterile and intended for dilution prior to skin testing and/or immunotherapy. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. The route of administration for immunotherapy is subcutaneous. The designation AU/ml (Allergy Units per ml) is unitage based upon the relative potency of this standardized mite extract when compared by ELISA competition to the F.D.A. Mite Allergenic Reference Standard labeled 10,000 AU/ml assigned on the basis of quantitative skin testing by the ID50EAL Method.1,2,3,4,5,16 Lower concentrations (e.g. 5,000 AU/ml and 3,000 AU/ml) are prepared by dilution of stock concentrates. Mite mixtures containing equal volumes of D. farinae and D. pteronyssinus are available at 5,000 AU/ml, 2,500 AU/ml and 1,500 AU/ml. Active allergens are described by common and scientific name on the stock concentrate container label. INGREDIENTS: Extract of Standardized Mites contain at least 99.0% adult mites and mite stages. This product may contain trace amounts of yeast and/or pork products; sodium chloride 0.95%; sodium bicarbonate 0.24%; 50% v/v glycerine as stabilizing agent and preservative. Following is a brief description of the standardized quality procedures applied to these extracts: 1. The source material is carefully selected from whole body adult mites and mite stages cultured from a medium containing no material of human origin. The source material is extracted with a saline buffer and 50% v/v glycerine. 2. Several manufacturers submitted intradermal skin test data on Biopol Laboratories mite medium extract using patients who were puncture test positive (erythema greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (erythema greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive to the mite extract and who were also skin test positive to the mite medium extract were also skin tested by the puncture method with an extract of yeast (Saccharomyces sp.) and were positive. 3. A ninhydrin protein analysis is completed to compare with the standard extract. 4. Each lot is standardized against the F.D.A. reference standard extract for total biologic activity by means of ELISA competition. 5. The standardized mite extract is analyzed for glycerine content to insure a minimum of 50% v/v glycerine for optimal stability during the entire dating period."
},
{
"NDCCode": "49288-0175-2",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (49288-0175-2)",
"NDC11Code": "49288-0175-02",
"ProductNDC": "49288-0175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite, Dermatophagoides Farinae",
"NonProprietaryName": "Standardized Mite, Dermatophagoides Farinae",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19911022",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102224",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "10000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS],Insect Proteins [CS],Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "INDICATIONS AND USAGE Standardized Mite allergenic extract is indicated for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. An orderly approach to the diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing. Mite mixtures should not be used for diagnostic skin testing. The individual mites should be used. Mite mixtures may be used for immunotherapy to treat patients who demonstrated sensitivity to both D. farinae and D. pteronyssinus mites. Patients who react to both D. farinae and D. pteronyssinus have demonstrated a significant cross-reactivity. Caution should be used in escalating treatment with mite mixtures.21PRICK-PUNCTURE TESTING: A positive control using Histamine Phosphate is important to identify those patients whose skin may not be reactive due to medications, metabolic or other reasons. A diluent control, if negative, would exclude false-positive reactions due to ingredients in the diluent or patients who have dermatographism. To identify highly sensitive individuals and as a safety precaution, it is recommended that prick-puncture test using a drop of the extract concentrate (10,000 AU/ml) be performed prior to initiating very dilute intradermal testing. Prick-puncture testing is performed by placing a drop of extract concentrate on the skin and puncturing the skin through the drop with a small needle such as a bifurcated vaccinating needle. The most satisfactory sites on the back for skin testing are from the posterior axillary fold to 2.5 cm from the spinal column, and from the top of the scapula to the lower rib margins. The best areas on the arms are the volar surfaces from the axilla to 2.5 or 5 cm above the wrist, skipping the anticubital space. Glycerinated Mite extracts containing 10,000 AU/ml are recommended for prick-puncture testing. Skin reactions are based on size of erythema and wheal. For interpretation of skin reactions, refer to chart below. Smaller, less conclusive reactions may be considered positive in conjunction with a definitive history of symptoms on exposure to the mite allergen. The more sensitive the patient the higher the probability that he/she will have symptoms related to the exposure of the offending allergen. Hence, the importance of a good patient history. Less sensitive individuals can be tested intradermally with an appropriately diluted extract. A clinical study using the same patients with positive prick-puncture test (10) using the ID50EAL Method, Intradermal Dilution for 50 mm Sum of Erythema D50 Determines the Allergy Unit, has demonstrated the following: Skin test by prick-puncture test using Standardized D. farinae Mite, 10,000 AU/ml was performed in 10 patients. The mean sum of erythema diameter was 76.6 mm (Range 45-104 mm). Skin test by prick-puncture test using Standardized D. pteronyssinus Mite, 10,000 AU/ml in 10 patients, the mean sum of erythema diameter was 74.7 mm (Range 43-109 mm). *C = Concentration. SINGLE DILUTION INTRADERMAL TESTING: The surface of the upper and lower arm is the usual location for skin testing. It is important that a new, sterile, disposable syringe and needle be used for each extract tested. Intracutaneous test dilutions should be made with aqueous diluent. (1) Start testing with the most dilute allergenic extract concentration. (2) A volume of 0.02-0.05 ml should be injected slowly into the superficial skin layers making a small bleb (superficial wheal). (3) For patients without a history of extreme sensitivity, a prick-puncture test of less than 2+, the initial dilution for skin testing should contain 0.02 to 0.06 AU/ml (see Table I). For very sensitive patients with a prick-puncture of greater than 2+, a further dilution should be made to 0.002 to 0.006 AU/ml (see Table I). If after 20 minutes no skin reaction is obtained, continue the testing using five-fold or ten-fold increments in potency until a reaction of 1+ or until the concentration of 2,000 AU (five-fold) or 1,000 AU (ten-fold) has been tested with a glycerine control. Glycerine may be used at a dilution of 0.5% as long as 0.5% glycerine produces negative control. The diluent should be tested and included in the interpretation of the skin reactions.16 INTRADERMAL TESTING–SKIN ENDPOINT TITRATION: The allergenic extracts to which the patient is sensitive, the patient's degree of sensitivity and the dose of allergen to be used in immunotherapy can be determined through the use of intracutaneous skin tests involving progressive five-fold dilutions of allergenic extracts, prepared and refrigerated at 2-8° C. The critical variable is the size if the wheal and erythema produced by the intracutaneous injection of 0.01 to 0.02 ml of the test allergen producing a 4 mm diameter superficial skin wheal. For patients demonstrating a prick-puncture skin test of less than 2+, an initial screening dilution of 0.02-0.06 AU/ml is safe (see Table I). For patients demonstrating a prick-puncture skin test greater than 2+, an initial screening dilution of 0.002 to 0.006 AU/ml is safe. The skin endpoint is detected by noting the dilution that produces a wheal 2 mm larger than non-reacting dilutions (5 mm negative wheal) until progressive whealing with each five-fold increase in test potency occurs, i.e., a 5 mm (negative), 7 mm, 9 mm, 11 mm is the normal sequence of whealing. The 7 mm wheal would be the endpoint. The endpoint dilution is used as an initial dose concentration for immunotherapy. An endpoint dose of 0.15 ml is a safe initial dose to be followed by escalation to the optimal maximum tolerated dose for each individual. Using Standardized D. farinae Mite, 10,000 AU/ml on 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.4). Using Standardized D. pteronyssinus Mite 10,000 AU/ml in 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.7).",
"Description": "DESCRIPTION The extract is sterile and intended for dilution prior to skin testing and/or immunotherapy. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. The route of administration for immunotherapy is subcutaneous. The designation AU/ml (Allergy Units per ml) is unitage based upon the relative potency of this standardized mite extract when compared by ELISA competition to the F.D.A. Mite Allergenic Reference Standard labeled 10,000 AU/ml assigned on the basis of quantitative skin testing by the ID50EAL Method.1,2,3,4,5,16 Lower concentrations (e.g. 5,000 AU/ml and 3,000 AU/ml) are prepared by dilution of stock concentrates. Mite mixtures containing equal volumes of D. farinae and D. pteronyssinus are available at 5,000 AU/ml, 2,500 AU/ml and 1,500 AU/ml. Active allergens are described by common and scientific name on the stock concentrate container label. INGREDIENTS: Extract of Standardized Mites contain at least 99.0% adult mites and mite stages. This product may contain trace amounts of yeast and/or pork products; sodium chloride 0.95%; sodium bicarbonate 0.24%; 50% v/v glycerine as stabilizing agent and preservative. Following is a brief description of the standardized quality procedures applied to these extracts: 1. The source material is carefully selected from whole body adult mites and mite stages cultured from a medium containing no material of human origin. The source material is extracted with a saline buffer and 50% v/v glycerine. 2. Several manufacturers submitted intradermal skin test data on Biopol Laboratories mite medium extract using patients who were puncture test positive (erythema greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (erythema greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive to the mite extract and who were also skin test positive to the mite medium extract were also skin tested by the puncture method with an extract of yeast (Saccharomyces sp.) and were positive. 3. A ninhydrin protein analysis is completed to compare with the standard extract. 4. Each lot is standardized against the F.D.A. reference standard extract for total biologic activity by means of ELISA competition. 5. The standardized mite extract is analyzed for glycerine content to insure a minimum of 50% v/v glycerine for optimal stability during the entire dating period."
},
{
"NDCCode": "49288-0175-3",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (49288-0175-3)",
"NDC11Code": "49288-0175-03",
"ProductNDC": "49288-0175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite, Dermatophagoides Farinae",
"NonProprietaryName": "Standardized Mite, Dermatophagoides Farinae",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19911022",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102224",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "10000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS],Insect Proteins [CS],Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "INDICATIONS AND USAGE Standardized Mite allergenic extract is indicated for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. An orderly approach to the diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing. Mite mixtures should not be used for diagnostic skin testing. The individual mites should be used. Mite mixtures may be used for immunotherapy to treat patients who demonstrated sensitivity to both D. farinae and D. pteronyssinus mites. Patients who react to both D. farinae and D. pteronyssinus have demonstrated a significant cross-reactivity. Caution should be used in escalating treatment with mite mixtures.21PRICK-PUNCTURE TESTING: A positive control using Histamine Phosphate is important to identify those patients whose skin may not be reactive due to medications, metabolic or other reasons. A diluent control, if negative, would exclude false-positive reactions due to ingredients in the diluent or patients who have dermatographism. To identify highly sensitive individuals and as a safety precaution, it is recommended that prick-puncture test using a drop of the extract concentrate (10,000 AU/ml) be performed prior to initiating very dilute intradermal testing. Prick-puncture testing is performed by placing a drop of extract concentrate on the skin and puncturing the skin through the drop with a small needle such as a bifurcated vaccinating needle. The most satisfactory sites on the back for skin testing are from the posterior axillary fold to 2.5 cm from the spinal column, and from the top of the scapula to the lower rib margins. The best areas on the arms are the volar surfaces from the axilla to 2.5 or 5 cm above the wrist, skipping the anticubital space. Glycerinated Mite extracts containing 10,000 AU/ml are recommended for prick-puncture testing. Skin reactions are based on size of erythema and wheal. For interpretation of skin reactions, refer to chart below. Smaller, less conclusive reactions may be considered positive in conjunction with a definitive history of symptoms on exposure to the mite allergen. The more sensitive the patient the higher the probability that he/she will have symptoms related to the exposure of the offending allergen. Hence, the importance of a good patient history. Less sensitive individuals can be tested intradermally with an appropriately diluted extract. A clinical study using the same patients with positive prick-puncture test (10) using the ID50EAL Method, Intradermal Dilution for 50 mm Sum of Erythema D50 Determines the Allergy Unit, has demonstrated the following: Skin test by prick-puncture test using Standardized D. farinae Mite, 10,000 AU/ml was performed in 10 patients. The mean sum of erythema diameter was 76.6 mm (Range 45-104 mm). Skin test by prick-puncture test using Standardized D. pteronyssinus Mite, 10,000 AU/ml in 10 patients, the mean sum of erythema diameter was 74.7 mm (Range 43-109 mm). *C = Concentration. SINGLE DILUTION INTRADERMAL TESTING: The surface of the upper and lower arm is the usual location for skin testing. It is important that a new, sterile, disposable syringe and needle be used for each extract tested. Intracutaneous test dilutions should be made with aqueous diluent. (1) Start testing with the most dilute allergenic extract concentration. (2) A volume of 0.02-0.05 ml should be injected slowly into the superficial skin layers making a small bleb (superficial wheal). (3) For patients without a history of extreme sensitivity, a prick-puncture test of less than 2+, the initial dilution for skin testing should contain 0.02 to 0.06 AU/ml (see Table I). For very sensitive patients with a prick-puncture of greater than 2+, a further dilution should be made to 0.002 to 0.006 AU/ml (see Table I). If after 20 minutes no skin reaction is obtained, continue the testing using five-fold or ten-fold increments in potency until a reaction of 1+ or until the concentration of 2,000 AU (five-fold) or 1,000 AU (ten-fold) has been tested with a glycerine control. Glycerine may be used at a dilution of 0.5% as long as 0.5% glycerine produces negative control. The diluent should be tested and included in the interpretation of the skin reactions.16 INTRADERMAL TESTING–SKIN ENDPOINT TITRATION: The allergenic extracts to which the patient is sensitive, the patient's degree of sensitivity and the dose of allergen to be used in immunotherapy can be determined through the use of intracutaneous skin tests involving progressive five-fold dilutions of allergenic extracts, prepared and refrigerated at 2-8° C. The critical variable is the size if the wheal and erythema produced by the intracutaneous injection of 0.01 to 0.02 ml of the test allergen producing a 4 mm diameter superficial skin wheal. For patients demonstrating a prick-puncture skin test of less than 2+, an initial screening dilution of 0.02-0.06 AU/ml is safe (see Table I). For patients demonstrating a prick-puncture skin test greater than 2+, an initial screening dilution of 0.002 to 0.006 AU/ml is safe. The skin endpoint is detected by noting the dilution that produces a wheal 2 mm larger than non-reacting dilutions (5 mm negative wheal) until progressive whealing with each five-fold increase in test potency occurs, i.e., a 5 mm (negative), 7 mm, 9 mm, 11 mm is the normal sequence of whealing. The 7 mm wheal would be the endpoint. The endpoint dilution is used as an initial dose concentration for immunotherapy. An endpoint dose of 0.15 ml is a safe initial dose to be followed by escalation to the optimal maximum tolerated dose for each individual. Using Standardized D. farinae Mite, 10,000 AU/ml on 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.4). Using Standardized D. pteronyssinus Mite 10,000 AU/ml in 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.7).",
"Description": "DESCRIPTION The extract is sterile and intended for dilution prior to skin testing and/or immunotherapy. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. The route of administration for immunotherapy is subcutaneous. The designation AU/ml (Allergy Units per ml) is unitage based upon the relative potency of this standardized mite extract when compared by ELISA competition to the F.D.A. Mite Allergenic Reference Standard labeled 10,000 AU/ml assigned on the basis of quantitative skin testing by the ID50EAL Method.1,2,3,4,5,16 Lower concentrations (e.g. 5,000 AU/ml and 3,000 AU/ml) are prepared by dilution of stock concentrates. Mite mixtures containing equal volumes of D. farinae and D. pteronyssinus are available at 5,000 AU/ml, 2,500 AU/ml and 1,500 AU/ml. Active allergens are described by common and scientific name on the stock concentrate container label. INGREDIENTS: Extract of Standardized Mites contain at least 99.0% adult mites and mite stages. This product may contain trace amounts of yeast and/or pork products; sodium chloride 0.95%; sodium bicarbonate 0.24%; 50% v/v glycerine as stabilizing agent and preservative. Following is a brief description of the standardized quality procedures applied to these extracts: 1. The source material is carefully selected from whole body adult mites and mite stages cultured from a medium containing no material of human origin. The source material is extracted with a saline buffer and 50% v/v glycerine. 2. Several manufacturers submitted intradermal skin test data on Biopol Laboratories mite medium extract using patients who were puncture test positive (erythema greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (erythema greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive to the mite extract and who were also skin test positive to the mite medium extract were also skin tested by the puncture method with an extract of yeast (Saccharomyces sp.) and were positive. 3. A ninhydrin protein analysis is completed to compare with the standard extract. 4. Each lot is standardized against the F.D.A. reference standard extract for total biologic activity by means of ELISA competition. 5. The standardized mite extract is analyzed for glycerine content to insure a minimum of 50% v/v glycerine for optimal stability during the entire dating period."
},
{
"NDCCode": "49288-0175-4",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (49288-0175-4)",
"NDC11Code": "49288-0175-04",
"ProductNDC": "49288-0175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite, Dermatophagoides Farinae",
"NonProprietaryName": "Standardized Mite, Dermatophagoides Farinae",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19911022",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102224",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "10000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS],Insect Proteins [CS],Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "INDICATIONS AND USAGE Standardized Mite allergenic extract is indicated for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. An orderly approach to the diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing. Mite mixtures should not be used for diagnostic skin testing. The individual mites should be used. Mite mixtures may be used for immunotherapy to treat patients who demonstrated sensitivity to both D. farinae and D. pteronyssinus mites. Patients who react to both D. farinae and D. pteronyssinus have demonstrated a significant cross-reactivity. Caution should be used in escalating treatment with mite mixtures.21PRICK-PUNCTURE TESTING: A positive control using Histamine Phosphate is important to identify those patients whose skin may not be reactive due to medications, metabolic or other reasons. A diluent control, if negative, would exclude false-positive reactions due to ingredients in the diluent or patients who have dermatographism. To identify highly sensitive individuals and as a safety precaution, it is recommended that prick-puncture test using a drop of the extract concentrate (10,000 AU/ml) be performed prior to initiating very dilute intradermal testing. Prick-puncture testing is performed by placing a drop of extract concentrate on the skin and puncturing the skin through the drop with a small needle such as a bifurcated vaccinating needle. The most satisfactory sites on the back for skin testing are from the posterior axillary fold to 2.5 cm from the spinal column, and from the top of the scapula to the lower rib margins. The best areas on the arms are the volar surfaces from the axilla to 2.5 or 5 cm above the wrist, skipping the anticubital space. Glycerinated Mite extracts containing 10,000 AU/ml are recommended for prick-puncture testing. Skin reactions are based on size of erythema and wheal. For interpretation of skin reactions, refer to chart below. Smaller, less conclusive reactions may be considered positive in conjunction with a definitive history of symptoms on exposure to the mite allergen. The more sensitive the patient the higher the probability that he/she will have symptoms related to the exposure of the offending allergen. Hence, the importance of a good patient history. Less sensitive individuals can be tested intradermally with an appropriately diluted extract. A clinical study using the same patients with positive prick-puncture test (10) using the ID50EAL Method, Intradermal Dilution for 50 mm Sum of Erythema D50 Determines the Allergy Unit, has demonstrated the following: Skin test by prick-puncture test using Standardized D. farinae Mite, 10,000 AU/ml was performed in 10 patients. The mean sum of erythema diameter was 76.6 mm (Range 45-104 mm). Skin test by prick-puncture test using Standardized D. pteronyssinus Mite, 10,000 AU/ml in 10 patients, the mean sum of erythema diameter was 74.7 mm (Range 43-109 mm). *C = Concentration. SINGLE DILUTION INTRADERMAL TESTING: The surface of the upper and lower arm is the usual location for skin testing. It is important that a new, sterile, disposable syringe and needle be used for each extract tested. Intracutaneous test dilutions should be made with aqueous diluent. (1) Start testing with the most dilute allergenic extract concentration. (2) A volume of 0.02-0.05 ml should be injected slowly into the superficial skin layers making a small bleb (superficial wheal). (3) For patients without a history of extreme sensitivity, a prick-puncture test of less than 2+, the initial dilution for skin testing should contain 0.02 to 0.06 AU/ml (see Table I). For very sensitive patients with a prick-puncture of greater than 2+, a further dilution should be made to 0.002 to 0.006 AU/ml (see Table I). If after 20 minutes no skin reaction is obtained, continue the testing using five-fold or ten-fold increments in potency until a reaction of 1+ or until the concentration of 2,000 AU (five-fold) or 1,000 AU (ten-fold) has been tested with a glycerine control. Glycerine may be used at a dilution of 0.5% as long as 0.5% glycerine produces negative control. The diluent should be tested and included in the interpretation of the skin reactions.16 INTRADERMAL TESTING–SKIN ENDPOINT TITRATION: The allergenic extracts to which the patient is sensitive, the patient's degree of sensitivity and the dose of allergen to be used in immunotherapy can be determined through the use of intracutaneous skin tests involving progressive five-fold dilutions of allergenic extracts, prepared and refrigerated at 2-8° C. The critical variable is the size if the wheal and erythema produced by the intracutaneous injection of 0.01 to 0.02 ml of the test allergen producing a 4 mm diameter superficial skin wheal. For patients demonstrating a prick-puncture skin test of less than 2+, an initial screening dilution of 0.02-0.06 AU/ml is safe (see Table I). For patients demonstrating a prick-puncture skin test greater than 2+, an initial screening dilution of 0.002 to 0.006 AU/ml is safe. The skin endpoint is detected by noting the dilution that produces a wheal 2 mm larger than non-reacting dilutions (5 mm negative wheal) until progressive whealing with each five-fold increase in test potency occurs, i.e., a 5 mm (negative), 7 mm, 9 mm, 11 mm is the normal sequence of whealing. The 7 mm wheal would be the endpoint. The endpoint dilution is used as an initial dose concentration for immunotherapy. An endpoint dose of 0.15 ml is a safe initial dose to be followed by escalation to the optimal maximum tolerated dose for each individual. Using Standardized D. farinae Mite, 10,000 AU/ml on 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.4). Using Standardized D. pteronyssinus Mite 10,000 AU/ml in 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.7).",
"Description": "DESCRIPTION The extract is sterile and intended for dilution prior to skin testing and/or immunotherapy. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. The route of administration for immunotherapy is subcutaneous. The designation AU/ml (Allergy Units per ml) is unitage based upon the relative potency of this standardized mite extract when compared by ELISA competition to the F.D.A. Mite Allergenic Reference Standard labeled 10,000 AU/ml assigned on the basis of quantitative skin testing by the ID50EAL Method.1,2,3,4,5,16 Lower concentrations (e.g. 5,000 AU/ml and 3,000 AU/ml) are prepared by dilution of stock concentrates. Mite mixtures containing equal volumes of D. farinae and D. pteronyssinus are available at 5,000 AU/ml, 2,500 AU/ml and 1,500 AU/ml. Active allergens are described by common and scientific name on the stock concentrate container label. INGREDIENTS: Extract of Standardized Mites contain at least 99.0% adult mites and mite stages. This product may contain trace amounts of yeast and/or pork products; sodium chloride 0.95%; sodium bicarbonate 0.24%; 50% v/v glycerine as stabilizing agent and preservative. Following is a brief description of the standardized quality procedures applied to these extracts: 1. The source material is carefully selected from whole body adult mites and mite stages cultured from a medium containing no material of human origin. The source material is extracted with a saline buffer and 50% v/v glycerine. 2. Several manufacturers submitted intradermal skin test data on Biopol Laboratories mite medium extract using patients who were puncture test positive (erythema greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (erythema greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive to the mite extract and who were also skin test positive to the mite medium extract were also skin tested by the puncture method with an extract of yeast (Saccharomyces sp.) and were positive. 3. A ninhydrin protein analysis is completed to compare with the standard extract. 4. Each lot is standardized against the F.D.A. reference standard extract for total biologic activity by means of ELISA competition. 5. The standardized mite extract is analyzed for glycerine content to insure a minimum of 50% v/v glycerine for optimal stability during the entire dating period."
},
{
"NDCCode": "49288-0175-5",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (49288-0175-5)",
"NDC11Code": "49288-0175-05",
"ProductNDC": "49288-0175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Mite, Dermatophagoides Farinae",
"NonProprietaryName": "Standardized Mite, Dermatophagoides Farinae",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19911022",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102224",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "DERMATOPHAGOIDES FARINAE",
"StrengthNumber": "10000",
"StrengthUnit": "[AU]/mL",
"Pharm_Classes": "Allergens [CS],Insect Proteins [CS],Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "INDICATIONS AND USAGE Standardized Mite allergenic extract is indicated for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. An orderly approach to the diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing. Mite mixtures should not be used for diagnostic skin testing. The individual mites should be used. Mite mixtures may be used for immunotherapy to treat patients who demonstrated sensitivity to both D. farinae and D. pteronyssinus mites. Patients who react to both D. farinae and D. pteronyssinus have demonstrated a significant cross-reactivity. Caution should be used in escalating treatment with mite mixtures.21PRICK-PUNCTURE TESTING: A positive control using Histamine Phosphate is important to identify those patients whose skin may not be reactive due to medications, metabolic or other reasons. A diluent control, if negative, would exclude false-positive reactions due to ingredients in the diluent or patients who have dermatographism. To identify highly sensitive individuals and as a safety precaution, it is recommended that prick-puncture test using a drop of the extract concentrate (10,000 AU/ml) be performed prior to initiating very dilute intradermal testing. Prick-puncture testing is performed by placing a drop of extract concentrate on the skin and puncturing the skin through the drop with a small needle such as a bifurcated vaccinating needle. The most satisfactory sites on the back for skin testing are from the posterior axillary fold to 2.5 cm from the spinal column, and from the top of the scapula to the lower rib margins. The best areas on the arms are the volar surfaces from the axilla to 2.5 or 5 cm above the wrist, skipping the anticubital space. Glycerinated Mite extracts containing 10,000 AU/ml are recommended for prick-puncture testing. Skin reactions are based on size of erythema and wheal. For interpretation of skin reactions, refer to chart below. Smaller, less conclusive reactions may be considered positive in conjunction with a definitive history of symptoms on exposure to the mite allergen. The more sensitive the patient the higher the probability that he/she will have symptoms related to the exposure of the offending allergen. Hence, the importance of a good patient history. Less sensitive individuals can be tested intradermally with an appropriately diluted extract. A clinical study using the same patients with positive prick-puncture test (10) using the ID50EAL Method, Intradermal Dilution for 50 mm Sum of Erythema D50 Determines the Allergy Unit, has demonstrated the following: Skin test by prick-puncture test using Standardized D. farinae Mite, 10,000 AU/ml was performed in 10 patients. The mean sum of erythema diameter was 76.6 mm (Range 45-104 mm). Skin test by prick-puncture test using Standardized D. pteronyssinus Mite, 10,000 AU/ml in 10 patients, the mean sum of erythema diameter was 74.7 mm (Range 43-109 mm). *C = Concentration. SINGLE DILUTION INTRADERMAL TESTING: The surface of the upper and lower arm is the usual location for skin testing. It is important that a new, sterile, disposable syringe and needle be used for each extract tested. Intracutaneous test dilutions should be made with aqueous diluent. (1) Start testing with the most dilute allergenic extract concentration. (2) A volume of 0.02-0.05 ml should be injected slowly into the superficial skin layers making a small bleb (superficial wheal). (3) For patients without a history of extreme sensitivity, a prick-puncture test of less than 2+, the initial dilution for skin testing should contain 0.02 to 0.06 AU/ml (see Table I). For very sensitive patients with a prick-puncture of greater than 2+, a further dilution should be made to 0.002 to 0.006 AU/ml (see Table I). If after 20 minutes no skin reaction is obtained, continue the testing using five-fold or ten-fold increments in potency until a reaction of 1+ or until the concentration of 2,000 AU (five-fold) or 1,000 AU (ten-fold) has been tested with a glycerine control. Glycerine may be used at a dilution of 0.5% as long as 0.5% glycerine produces negative control. The diluent should be tested and included in the interpretation of the skin reactions.16 INTRADERMAL TESTING–SKIN ENDPOINT TITRATION: The allergenic extracts to which the patient is sensitive, the patient's degree of sensitivity and the dose of allergen to be used in immunotherapy can be determined through the use of intracutaneous skin tests involving progressive five-fold dilutions of allergenic extracts, prepared and refrigerated at 2-8° C. The critical variable is the size if the wheal and erythema produced by the intracutaneous injection of 0.01 to 0.02 ml of the test allergen producing a 4 mm diameter superficial skin wheal. For patients demonstrating a prick-puncture skin test of less than 2+, an initial screening dilution of 0.02-0.06 AU/ml is safe (see Table I). For patients demonstrating a prick-puncture skin test greater than 2+, an initial screening dilution of 0.002 to 0.006 AU/ml is safe. The skin endpoint is detected by noting the dilution that produces a wheal 2 mm larger than non-reacting dilutions (5 mm negative wheal) until progressive whealing with each five-fold increase in test potency occurs, i.e., a 5 mm (negative), 7 mm, 9 mm, 11 mm is the normal sequence of whealing. The 7 mm wheal would be the endpoint. The endpoint dilution is used as an initial dose concentration for immunotherapy. An endpoint dose of 0.15 ml is a safe initial dose to be followed by escalation to the optimal maximum tolerated dose for each individual. Using Standardized D. farinae Mite, 10,000 AU/ml on 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.4). Using Standardized D. pteronyssinus Mite 10,000 AU/ml in 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.7).",
"Description": "DESCRIPTION The extract is sterile and intended for dilution prior to skin testing and/or immunotherapy. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. The route of administration for immunotherapy is subcutaneous. The designation AU/ml (Allergy Units per ml) is unitage based upon the relative potency of this standardized mite extract when compared by ELISA competition to the F.D.A. Mite Allergenic Reference Standard labeled 10,000 AU/ml assigned on the basis of quantitative skin testing by the ID50EAL Method.1,2,3,4,5,16 Lower concentrations (e.g. 5,000 AU/ml and 3,000 AU/ml) are prepared by dilution of stock concentrates. Mite mixtures containing equal volumes of D. farinae and D. pteronyssinus are available at 5,000 AU/ml, 2,500 AU/ml and 1,500 AU/ml. Active allergens are described by common and scientific name on the stock concentrate container label. INGREDIENTS: Extract of Standardized Mites contain at least 99.0% adult mites and mite stages. This product may contain trace amounts of yeast and/or pork products; sodium chloride 0.95%; sodium bicarbonate 0.24%; 50% v/v glycerine as stabilizing agent and preservative. Following is a brief description of the standardized quality procedures applied to these extracts: 1. The source material is carefully selected from whole body adult mites and mite stages cultured from a medium containing no material of human origin. The source material is extracted with a saline buffer and 50% v/v glycerine. 2. Several manufacturers submitted intradermal skin test data on Biopol Laboratories mite medium extract using patients who were puncture test positive (erythema greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (erythema greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive to the mite extract and who were also skin test positive to the mite medium extract were also skin tested by the puncture method with an extract of yeast (Saccharomyces sp.) and were positive. 3. A ninhydrin protein analysis is completed to compare with the standard extract. 4. Each lot is standardized against the F.D.A. reference standard extract for total biologic activity by means of ELISA competition. 5. The standardized mite extract is analyzed for glycerine content to insure a minimum of 50% v/v glycerine for optimal stability during the entire dating period."
},
{
"NDCCode": "51013-175-04",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (51013-175-04) / 12 CAPSULE, LIQUID FILLED in 1 BLISTER PACK",
"NDC11Code": "51013-0175-04",
"ProductNDC": "51013-175",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Night Time Severe Cold And Flu Relief",
"NonProprietaryName": "Acetaminophen, Phenylephrine Hydrochloride, Doxylamine Succinate, Dextromethorphan Hydrobromide",
"DosageFormName": "CAPSULE, LIQUID FILLED",
"RouteName": "ORAL",
"StartMarketingDate": "20160609",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M012",
"LabelerName": "PuraCap Pharmaceutical LLC",
"SubstanceName": "ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE; DOXYLAMINE SUCCINATE; PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "325; 10; 6.25; 5",
"StrengthUnit": "mg/1; mg/1; mg/1; mg/1",
"Pharm_Classes": "Adrenergic alpha1-Agonists [MoA], Antihistamine [EPC], Histamine Receptor Antagonists [MoA], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA], alpha-1 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-11-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20160609",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves common cold/flu symptoms: 1 nasal congestion, 2 sinus congestion & pressure, 3 cough due to minor throat & bronchial irritation, 4 cough to help you sleep, 5 minor aches & pains, 6 headache, 7 fever, 8 sore throat, 9 runny nose & sneezing, 10 reduces swelling of nasal passages, 11 temporarily restores freer breathing through the nose, 12 promotes nasal and/or sinus drainage."
},
{
"NDCCode": "54305-175-09",
"PackageDescription": "9 LOZENGE in 1 BAG (54305-175-09) ",
"NDC11Code": "54305-0175-09",
"ProductNDC": "54305-175",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "The Original Natural Herb Cough Drops",
"NonProprietaryName": "Menthol",
"DosageFormName": "LOZENGE",
"RouteName": "ORAL",
"StartMarketingDate": "19420101",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M012",
"LabelerName": "Ricola Ag",
"SubstanceName": "MENTHOL",
"StrengthNumber": "4.8",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-09-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260101",
"SamplePackage": "N",
"IndicationAndUsage": ". temporarily relieves: 1 cough due to a cold or inhaled irritants, 2 occasional minor irritation and pain due to sore throat or sore mouth."
},
{
"NDCCode": "55150-175-01",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (55150-175-01) / 1 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "55150-0175-01",
"ProductNDC": "55150-175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Granisetron Hydrochloride",
"NonProprietaryName": "Granisetron Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20160706",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204238",
"LabelerName": "Eugia US LLC",
"SubstanceName": "GRANISETRON HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20160706",
"SamplePackage": "N",
"IndicationAndUsage": "Granisetron hydrochloride injection, is a serotonin-3 (5-HT3) receptor antagonist indicated for.",
"Description": "Granisetron hydrochloride injection, USP is a serotonin-3 (5-HT3) receptor antagonist. Chemically it is endo-N-(9-methyl-9-azabicyclo [3.3.1] non-3-yl)-1-methyl-1H-indazole-3-carboxamide hydrochloride with a molecular weight of 348.9 (312.4 free base). Its molecular formula is C18H24N4OHCl, while its chemical structure is. Granisetron hydrochloride USP is a white or almost white powder that is readily soluble in water and normal saline at 20°C. Granisetron hydrochloride injection, USP is a clear, colorless, sterile, nonpyrogenic, aqueous solution for intravenous administration. Granisetron hydrochloride injection, USP 1 mg/mL is available in 1 mL single-dose and 4 mL multiple-dose vials. Each mL contains 1.12 mg granisetron hydrochloride USP equivalent to granisetron 1 mg; sodium chloride, 9 mg; citric acid, 2 mg; methylparaben, 1.8 mg and propylparaben, 0.2 mg, as preservatives, water for injection, q.s., sodium hydroxide and hydrochloric acid, as pH adjusters. The solution's pH ranges from 4.0 to 6.0."
},
{
"NDCCode": "58443-0175-3",
"PackageDescription": "100 mL in 1 BOTTLE (58443-0175-3) ",
"NDC11Code": "58443-0175-03",
"ProductNDC": "58443-0175",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Solscents",
"ProprietaryNameSuffix": "Clear Face Flower Blast Broad Spectrum Spf 50",
"NonProprietaryName": "Octinoxate, Octisalate, And Zinc Oxide",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20150401",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Prime Enterprises, Inc.",
"SubstanceName": "OCTINOXATE; OCTISALATE; ZINC OXIDE",
"StrengthNumber": "76.5; 51; 45.9",
"StrengthUnit": "mg/mL; mg/mL; mg/mL",
"Pharm_Classes": "Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20150401",
"SamplePackage": "N",
"IndicationAndUsage": "Helps prevent sunburn. If used as directed with other sun protection measures (See Directions), decreases the risk of skin cancer and early skin aging caused by the sun. ."
},
{
"NDCCode": "59746-175-06",
"PackageDescription": "100 TABLET in 1 BOTTLE (59746-175-06) ",
"NDC11Code": "59746-0175-06",
"ProductNDC": "59746-175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisone",
"NonProprietaryName": "Prednisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20010829",
"EndMarketingDate": "20260501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040362",
"LabelerName": "Jubilant Cadista Pharmacuticals Inc.",
"SubstanceName": "PREDNISONE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-05-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20010829",
"EndMarketingDatePackage": "20260501",
"SamplePackage": "N",
"IndicationAndUsage": "Prednisone Tablets, USP are indicated in the following conditions. 1. Endocrine Disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance)Congenital adrenal hyperplasiaHypercalcemia associated with cancer Nonsuppurative thyroiditis. 2. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in:Psoriatic arthritisRheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy)Ankylosing spondylitisAcute and subacute bursitisAcute nonspecific tenosynovitisAcute gouty arthritisPost-traumatic osteoarthritisSynovitis of osteoarthritisEpicondylitis. 3. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of:Systemic lupus erythematosusSystemic dermatomyositis (polymyositis)Acute rheumatic carditis. 4. Dermatologic DiseasesPemphigusBullous dermatitis herpetiformisSevere erythema multiforme (Stevens-Johnson syndrome)Exfoliative dermatitisMycosis fungoidesSevere psoriasisSevere seborrheic dermatitis. 5. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment. Seasonal or perennial allergic rhinitisBronchial asthmaContact dermatitisAtopic dermatitis Serum sickness Drug hypersensitivity reactions. 6. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as. Allergic corneal marginal ulcersHerpes zoster ophthalmicusAnterior segment inflammationDiffuse posterior uveitis and choroiditisSympathetic ophthalmiaAllergic conjunctivitisKeratitisChorioretinitisOptic neuritisIritis and iridocyclitis. 7. Respiratory Diseases. Symptomatic sarcoidosisLoeffler’s syndrome not manageable by other meansBerylliosisFulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapyAspiration pneumonitis. 8. Hematologic Disorders. Idiopathic thrombocytopenic purpura in adultsSecondary thrombocytopenia in adultsAcquired (autoimmune) hemolytic anemiaErythroblastopenia (RBC anemia)Congenital (erythroid) hypoplastic anemia. 9. Neoplastic Diseases. For palliative management of. Leukemias and lymphomas in adultsAcute leukemia of childhood. 10. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 11. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in. Ulcerative colitisRegional enteritis. 12. Nervous System. Acute exacerbations of multiple sclerosis. 13. Miscellaneous. Tuberculous meningitis with subarachnoid block or, impending block when used concurrently with appropriate antituberculous chemotherapy Trichinosis with neurologic or myocardial involvement.",
"Description": "Prednisone, USP is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Prednisone, USP is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, in chloroform, in dioxane, and in methanol. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione, 17,21-dihydroxy- and its molecular weight is 358.43 The structural formula is represented below. Prednisone Tablets, USP are available in 5 strengths: 2.5 mg, 5 mg, 10 mg, 20 mg, and 50 mg. In addition, each tablet contains the following inactive Ingredients: Lactose Monohydrate, Magnesium Stearate, Pregelatinized Starch, Sodium Lauryl Sulfate and Sodium Starch Glycolate. Also Prednisone Tablets USP, 20 mg contains FD & C yellow # 6, aluminum lake, HT 15-18%."
},
{
"NDCCode": "59746-175-09",
"PackageDescription": "500 TABLET in 1 BOTTLE (59746-175-09) ",
"NDC11Code": "59746-0175-09",
"ProductNDC": "59746-175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisone",
"NonProprietaryName": "Prednisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20010829",
"EndMarketingDate": "20260501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040362",
"LabelerName": "Jubilant Cadista Pharmacuticals Inc.",
"SubstanceName": "PREDNISONE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-05-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20010829",
"EndMarketingDatePackage": "20260501",
"SamplePackage": "N",
"IndicationAndUsage": "Prednisone Tablets, USP are indicated in the following conditions. 1. Endocrine Disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance)Congenital adrenal hyperplasiaHypercalcemia associated with cancer Nonsuppurative thyroiditis. 2. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in:Psoriatic arthritisRheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy)Ankylosing spondylitisAcute and subacute bursitisAcute nonspecific tenosynovitisAcute gouty arthritisPost-traumatic osteoarthritisSynovitis of osteoarthritisEpicondylitis. 3. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of:Systemic lupus erythematosusSystemic dermatomyositis (polymyositis)Acute rheumatic carditis. 4. Dermatologic DiseasesPemphigusBullous dermatitis herpetiformisSevere erythema multiforme (Stevens-Johnson syndrome)Exfoliative dermatitisMycosis fungoidesSevere psoriasisSevere seborrheic dermatitis. 5. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment. Seasonal or perennial allergic rhinitisBronchial asthmaContact dermatitisAtopic dermatitis Serum sickness Drug hypersensitivity reactions. 6. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as. Allergic corneal marginal ulcersHerpes zoster ophthalmicusAnterior segment inflammationDiffuse posterior uveitis and choroiditisSympathetic ophthalmiaAllergic conjunctivitisKeratitisChorioretinitisOptic neuritisIritis and iridocyclitis. 7. Respiratory Diseases. Symptomatic sarcoidosisLoeffler’s syndrome not manageable by other meansBerylliosisFulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapyAspiration pneumonitis. 8. Hematologic Disorders. Idiopathic thrombocytopenic purpura in adultsSecondary thrombocytopenia in adultsAcquired (autoimmune) hemolytic anemiaErythroblastopenia (RBC anemia)Congenital (erythroid) hypoplastic anemia. 9. Neoplastic Diseases. For palliative management of. Leukemias and lymphomas in adultsAcute leukemia of childhood. 10. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 11. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in. Ulcerative colitisRegional enteritis. 12. Nervous System. Acute exacerbations of multiple sclerosis. 13. Miscellaneous. Tuberculous meningitis with subarachnoid block or, impending block when used concurrently with appropriate antituberculous chemotherapy Trichinosis with neurologic or myocardial involvement.",
"Description": "Prednisone, USP is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Prednisone, USP is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, in chloroform, in dioxane, and in methanol. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione, 17,21-dihydroxy- and its molecular weight is 358.43 The structural formula is represented below. Prednisone Tablets, USP are available in 5 strengths: 2.5 mg, 5 mg, 10 mg, 20 mg, and 50 mg. In addition, each tablet contains the following inactive Ingredients: Lactose Monohydrate, Magnesium Stearate, Pregelatinized Starch, Sodium Lauryl Sulfate and Sodium Starch Glycolate. Also Prednisone Tablets USP, 20 mg contains FD & C yellow # 6, aluminum lake, HT 15-18%."
},
{
"NDCCode": "59746-175-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (59746-175-10) ",
"NDC11Code": "59746-0175-10",
"ProductNDC": "59746-175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisone",
"NonProprietaryName": "Prednisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20010829",
"EndMarketingDate": "20260501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040362",
"LabelerName": "Jubilant Cadista Pharmacuticals Inc.",
"SubstanceName": "PREDNISONE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-05-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20010829",
"EndMarketingDatePackage": "20260501",
"SamplePackage": "N",
"IndicationAndUsage": "Prednisone Tablets, USP are indicated in the following conditions. 1. Endocrine Disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance)Congenital adrenal hyperplasiaHypercalcemia associated with cancer Nonsuppurative thyroiditis. 2. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in:Psoriatic arthritisRheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy)Ankylosing spondylitisAcute and subacute bursitisAcute nonspecific tenosynovitisAcute gouty arthritisPost-traumatic osteoarthritisSynovitis of osteoarthritisEpicondylitis. 3. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of:Systemic lupus erythematosusSystemic dermatomyositis (polymyositis)Acute rheumatic carditis. 4. Dermatologic DiseasesPemphigusBullous dermatitis herpetiformisSevere erythema multiforme (Stevens-Johnson syndrome)Exfoliative dermatitisMycosis fungoidesSevere psoriasisSevere seborrheic dermatitis. 5. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment. Seasonal or perennial allergic rhinitisBronchial asthmaContact dermatitisAtopic dermatitis Serum sickness Drug hypersensitivity reactions. 6. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as. Allergic corneal marginal ulcersHerpes zoster ophthalmicusAnterior segment inflammationDiffuse posterior uveitis and choroiditisSympathetic ophthalmiaAllergic conjunctivitisKeratitisChorioretinitisOptic neuritisIritis and iridocyclitis. 7. Respiratory Diseases. Symptomatic sarcoidosisLoeffler’s syndrome not manageable by other meansBerylliosisFulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapyAspiration pneumonitis. 8. Hematologic Disorders. Idiopathic thrombocytopenic purpura in adultsSecondary thrombocytopenia in adultsAcquired (autoimmune) hemolytic anemiaErythroblastopenia (RBC anemia)Congenital (erythroid) hypoplastic anemia. 9. Neoplastic Diseases. For palliative management of. Leukemias and lymphomas in adultsAcute leukemia of childhood. 10. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 11. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in. Ulcerative colitisRegional enteritis. 12. Nervous System. Acute exacerbations of multiple sclerosis. 13. Miscellaneous. Tuberculous meningitis with subarachnoid block or, impending block when used concurrently with appropriate antituberculous chemotherapy Trichinosis with neurologic or myocardial involvement.",
"Description": "Prednisone, USP is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Prednisone, USP is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, in chloroform, in dioxane, and in methanol. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione, 17,21-dihydroxy- and its molecular weight is 358.43 The structural formula is represented below. Prednisone Tablets, USP are available in 5 strengths: 2.5 mg, 5 mg, 10 mg, 20 mg, and 50 mg. In addition, each tablet contains the following inactive Ingredients: Lactose Monohydrate, Magnesium Stearate, Pregelatinized Starch, Sodium Lauryl Sulfate and Sodium Starch Glycolate. Also Prednisone Tablets USP, 20 mg contains FD & C yellow # 6, aluminum lake, HT 15-18%."
},
{
"NDCCode": "61919-175-05",
"PackageDescription": "5 mL in 1 BOTTLE, DROPPER (61919-175-05)",
"NDC11Code": "61919-0175-05",
"ProductNDC": "61919-175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ofloxacin",
"NonProprietaryName": "Ofloxacin",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20140101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076407",
"LabelerName": "DIRECT RX",
"SubstanceName": "OFLOXACIN",
"StrengthNumber": "3",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Quinolone Antimicrobial [EPC],Quinolones [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Ofloxacin ophthalmic solution is indicated for the treatment of infections caused by susceptible strains of the following bacteria in the conditions listed below.",
"Description": "Ofloxacin Ophthalmic Solution USP, 0.3% is a sterile ophthalmic solution. It is a fluorinated carboxyquinolone anti-infective for topical ophthalmic use. Chemical Name: (±)-9-Fluoro-2, 3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido [1,2,3-de]-1,4 benzoxazine-6-carboxylic acid. Contains: Active: ofloxacin 0.3% (3 mg/mL);. Preservative: benzalkonium chloride (0.005%);. Inactives: sodium chloride and water for injection. May also contain hydrochloric acid and/or sodium hydroxide to adjust pH. Ofloxacin Ophthalmic Solution USP, 0.3% is unbuffered and formulated with a pH of 6.4 (range - 6.0 to 6.8). It has an osmolality of 300 mOsm/kg. Ofloxacin is a fluorinated 4-quinolone which differs from other fluorinated 4-quinolones in that there is a six member (pyridobenzoxazine) ring from positions 1 to 8 of the basic ring structure."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>71335-0175-9</NDCCode>
<PackageDescription>56 TABLET in 1 BOTTLE (71335-0175-9) </PackageDescription>
<NDC11Code>71335-0175-09</NDC11Code>
<ProductNDC>71335-0175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diethylpropion Hydrochloride</ProprietaryName>
<NonProprietaryName>Diethylpropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110718</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200177</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>DIETHYLPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-10-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20111021</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diethylpropion hydrochloride tablets USP, 25 mg are indicated in the management of exogenous obesity as a short-term adjunct (a few weeks) in a regimen of weight reduction based on caloric restriction in patients with an initial body mass index (BMI) of 30 kg/m2 or higher and who have not responded to appropriate weight reducing regimen (diet and/or exercise) alone. Below is a chart of BMI based on various heights and weights. BMI is calculated by taking the patient's weight, in kilograms (kg), divided by the patient's height, in meters (m), squared. Metric conversions are as follows: pounds divided by 2.2 = kg; inches × 0.0254 = meters. The usefulness of agents of this class (See CLINICAL PHARMACOLOGY) should be measured against possible risk factors inherent in their use such as those described below. Diethylpropion hydrochloride tablets USP, 25 mg are indicated for use as monotherapy only.</IndicationAndUsage>
<Description>Diethylpropion Hydrochloride Tablets USP, 25 mg are available for oral administration as tablets containing 25 mg diethylpropion hydrochloride, USP. The inactive ingredients in each tablet are: microcrystalline cellulose, lactose monohydrate, mannitol, tartaric acid, povidone, talc, and zinc stearate. Diethylpropion hydrochloride is a sympathomimetic agent. The chemical name for diethylpropion hydrochloride is 1-phenyl-2-diethyl-amino-1-propanone hydrochloride. Its chemical structure is.</Description>
</NDC>
<NDC>
<NDCCode>17856-0175-9</NDCCode>
<PackageDescription>5 BOX, UNIT-DOSE in 1 SYRINGE (17856-0175-9) > 120 SYRINGE in 1 BOX, UNIT-DOSE (17856-0175-7) > 2.5 mL in 1 SYRINGE (17856-0175-8) </PackageDescription>
<NDC11Code>17856-0175-09</NDC11Code>
<ProductNDC>17856-0175</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Acetaminophen</ProprietaryName>
<NonProprietaryName>Acetaminophen</NonProprietaryName>
<DosageFormName>ELIXIR</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210518</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part343</ApplicationNumber>
<LabelerName>ATLANTIC BIOLOGICALS CORP.</LabelerName>
<SubstanceName>ACETAMINOPHEN</SubstanceName>
<StrengthNumber>160</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221025</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce fever and for the temporary relief of minor aches and pains due to: 1 headache , 2 muscular aches , 3 backache , 4 minor pain of arthritis , 5 the common cold, 6 toothache , 7 premenstrual and menstrual cramps. .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>70000-0175-9</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (70000-0175-9) / 250 TABLET, FILM COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>70000-0175-09</NDC11Code>
<ProductNDC>70000-0175</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Leader Ibuprofen</ProprietaryName>
<NonProprietaryName>Ibuprofen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20161130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA072096</ApplicationNumber>
<LabelerName>Cardinal Health 110, LLC. dba Leader</LabelerName>
<SubstanceName>IBUPROFEN</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240129</StartMarketingDatePackage>
<EndMarketingDatePackage>20261031</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves minor aches and pains due to:headache muscular aches minor pain of arthritis toothachebackache the common cold menstrual cramps. temporarily reduces fever.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>71335-0175-0</NDCCode>
<PackageDescription>42 TABLET in 1 BOTTLE (71335-0175-0) </PackageDescription>
<NDC11Code>71335-0175-00</NDC11Code>
<ProductNDC>71335-0175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diethylpropion Hydrochloride</ProprietaryName>
<NonProprietaryName>Diethylpropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110718</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200177</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>DIETHYLPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-10-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20111021</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diethylpropion hydrochloride tablets USP, 25 mg are indicated in the management of exogenous obesity as a short-term adjunct (a few weeks) in a regimen of weight reduction based on caloric restriction in patients with an initial body mass index (BMI) of 30 kg/m2 or higher and who have not responded to appropriate weight reducing regimen (diet and/or exercise) alone. Below is a chart of BMI based on various heights and weights. BMI is calculated by taking the patient's weight, in kilograms (kg), divided by the patient's height, in meters (m), squared. Metric conversions are as follows: pounds divided by 2.2 = kg; inches × 0.0254 = meters. The usefulness of agents of this class (See CLINICAL PHARMACOLOGY) should be measured against possible risk factors inherent in their use such as those described below. Diethylpropion hydrochloride tablets USP, 25 mg are indicated for use as monotherapy only.</IndicationAndUsage>
<Description>Diethylpropion Hydrochloride Tablets USP, 25 mg are available for oral administration as tablets containing 25 mg diethylpropion hydrochloride, USP. The inactive ingredients in each tablet are: microcrystalline cellulose, lactose monohydrate, mannitol, tartaric acid, povidone, talc, and zinc stearate. Diethylpropion hydrochloride is a sympathomimetic agent. The chemical name for diethylpropion hydrochloride is 1-phenyl-2-diethyl-amino-1-propanone hydrochloride. Its chemical structure is.</Description>
</NDC>
<NDC>
<NDCCode>71335-0175-1</NDCCode>
<PackageDescription>28 TABLET in 1 BOTTLE (71335-0175-1) </PackageDescription>
<NDC11Code>71335-0175-01</NDC11Code>
<ProductNDC>71335-0175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diethylpropion Hydrochloride</ProprietaryName>
<NonProprietaryName>Diethylpropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110718</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200177</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>DIETHYLPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-10-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20111021</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diethylpropion hydrochloride tablets USP, 25 mg are indicated in the management of exogenous obesity as a short-term adjunct (a few weeks) in a regimen of weight reduction based on caloric restriction in patients with an initial body mass index (BMI) of 30 kg/m2 or higher and who have not responded to appropriate weight reducing regimen (diet and/or exercise) alone. Below is a chart of BMI based on various heights and weights. BMI is calculated by taking the patient's weight, in kilograms (kg), divided by the patient's height, in meters (m), squared. Metric conversions are as follows: pounds divided by 2.2 = kg; inches × 0.0254 = meters. The usefulness of agents of this class (See CLINICAL PHARMACOLOGY) should be measured against possible risk factors inherent in their use such as those described below. Diethylpropion hydrochloride tablets USP, 25 mg are indicated for use as monotherapy only.</IndicationAndUsage>
<Description>Diethylpropion Hydrochloride Tablets USP, 25 mg are available for oral administration as tablets containing 25 mg diethylpropion hydrochloride, USP. The inactive ingredients in each tablet are: microcrystalline cellulose, lactose monohydrate, mannitol, tartaric acid, povidone, talc, and zinc stearate. Diethylpropion hydrochloride is a sympathomimetic agent. The chemical name for diethylpropion hydrochloride is 1-phenyl-2-diethyl-amino-1-propanone hydrochloride. Its chemical structure is.</Description>
</NDC>
<NDC>
<NDCCode>71335-0175-2</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (71335-0175-2) </PackageDescription>
<NDC11Code>71335-0175-02</NDC11Code>
<ProductNDC>71335-0175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diethylpropion Hydrochloride</ProprietaryName>
<NonProprietaryName>Diethylpropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110718</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200177</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>DIETHYLPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-10-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20111021</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diethylpropion hydrochloride tablets USP, 25 mg are indicated in the management of exogenous obesity as a short-term adjunct (a few weeks) in a regimen of weight reduction based on caloric restriction in patients with an initial body mass index (BMI) of 30 kg/m2 or higher and who have not responded to appropriate weight reducing regimen (diet and/or exercise) alone. Below is a chart of BMI based on various heights and weights. BMI is calculated by taking the patient's weight, in kilograms (kg), divided by the patient's height, in meters (m), squared. Metric conversions are as follows: pounds divided by 2.2 = kg; inches × 0.0254 = meters. The usefulness of agents of this class (See CLINICAL PHARMACOLOGY) should be measured against possible risk factors inherent in their use such as those described below. Diethylpropion hydrochloride tablets USP, 25 mg are indicated for use as monotherapy only.</IndicationAndUsage>
<Description>Diethylpropion Hydrochloride Tablets USP, 25 mg are available for oral administration as tablets containing 25 mg diethylpropion hydrochloride, USP. The inactive ingredients in each tablet are: microcrystalline cellulose, lactose monohydrate, mannitol, tartaric acid, povidone, talc, and zinc stearate. Diethylpropion hydrochloride is a sympathomimetic agent. The chemical name for diethylpropion hydrochloride is 1-phenyl-2-diethyl-amino-1-propanone hydrochloride. Its chemical structure is.</Description>
</NDC>
<NDC>
<NDCCode>71335-0175-3</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (71335-0175-3) </PackageDescription>
<NDC11Code>71335-0175-03</NDC11Code>
<ProductNDC>71335-0175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diethylpropion Hydrochloride</ProprietaryName>
<NonProprietaryName>Diethylpropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110718</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200177</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>DIETHYLPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-10-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20111021</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diethylpropion hydrochloride tablets USP, 25 mg are indicated in the management of exogenous obesity as a short-term adjunct (a few weeks) in a regimen of weight reduction based on caloric restriction in patients with an initial body mass index (BMI) of 30 kg/m2 or higher and who have not responded to appropriate weight reducing regimen (diet and/or exercise) alone. Below is a chart of BMI based on various heights and weights. BMI is calculated by taking the patient's weight, in kilograms (kg), divided by the patient's height, in meters (m), squared. Metric conversions are as follows: pounds divided by 2.2 = kg; inches × 0.0254 = meters. The usefulness of agents of this class (See CLINICAL PHARMACOLOGY) should be measured against possible risk factors inherent in their use such as those described below. Diethylpropion hydrochloride tablets USP, 25 mg are indicated for use as monotherapy only.</IndicationAndUsage>
<Description>Diethylpropion Hydrochloride Tablets USP, 25 mg are available for oral administration as tablets containing 25 mg diethylpropion hydrochloride, USP. The inactive ingredients in each tablet are: microcrystalline cellulose, lactose monohydrate, mannitol, tartaric acid, povidone, talc, and zinc stearate. Diethylpropion hydrochloride is a sympathomimetic agent. The chemical name for diethylpropion hydrochloride is 1-phenyl-2-diethyl-amino-1-propanone hydrochloride. Its chemical structure is.</Description>
</NDC>
<NDC>
<NDCCode>71335-0175-4</NDCCode>
<PackageDescription>14 TABLET in 1 BOTTLE (71335-0175-4) </PackageDescription>
<NDC11Code>71335-0175-04</NDC11Code>
<ProductNDC>71335-0175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diethylpropion Hydrochloride</ProprietaryName>
<NonProprietaryName>Diethylpropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110718</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200177</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>DIETHYLPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-10-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20111021</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diethylpropion hydrochloride tablets USP, 25 mg are indicated in the management of exogenous obesity as a short-term adjunct (a few weeks) in a regimen of weight reduction based on caloric restriction in patients with an initial body mass index (BMI) of 30 kg/m2 or higher and who have not responded to appropriate weight reducing regimen (diet and/or exercise) alone. Below is a chart of BMI based on various heights and weights. BMI is calculated by taking the patient's weight, in kilograms (kg), divided by the patient's height, in meters (m), squared. Metric conversions are as follows: pounds divided by 2.2 = kg; inches × 0.0254 = meters. The usefulness of agents of this class (See CLINICAL PHARMACOLOGY) should be measured against possible risk factors inherent in their use such as those described below. Diethylpropion hydrochloride tablets USP, 25 mg are indicated for use as monotherapy only.</IndicationAndUsage>
<Description>Diethylpropion Hydrochloride Tablets USP, 25 mg are available for oral administration as tablets containing 25 mg diethylpropion hydrochloride, USP. The inactive ingredients in each tablet are: microcrystalline cellulose, lactose monohydrate, mannitol, tartaric acid, povidone, talc, and zinc stearate. Diethylpropion hydrochloride is a sympathomimetic agent. The chemical name for diethylpropion hydrochloride is 1-phenyl-2-diethyl-amino-1-propanone hydrochloride. Its chemical structure is.</Description>
</NDC>
<NDC>
<NDCCode>71335-0175-5</NDCCode>
<PackageDescription>21 TABLET in 1 BOTTLE (71335-0175-5) </PackageDescription>
<NDC11Code>71335-0175-05</NDC11Code>
<ProductNDC>71335-0175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diethylpropion Hydrochloride</ProprietaryName>
<NonProprietaryName>Diethylpropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110718</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200177</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>DIETHYLPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-10-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20111021</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diethylpropion hydrochloride tablets USP, 25 mg are indicated in the management of exogenous obesity as a short-term adjunct (a few weeks) in a regimen of weight reduction based on caloric restriction in patients with an initial body mass index (BMI) of 30 kg/m2 or higher and who have not responded to appropriate weight reducing regimen (diet and/or exercise) alone. Below is a chart of BMI based on various heights and weights. BMI is calculated by taking the patient's weight, in kilograms (kg), divided by the patient's height, in meters (m), squared. Metric conversions are as follows: pounds divided by 2.2 = kg; inches × 0.0254 = meters. The usefulness of agents of this class (See CLINICAL PHARMACOLOGY) should be measured against possible risk factors inherent in their use such as those described below. Diethylpropion hydrochloride tablets USP, 25 mg are indicated for use as monotherapy only.</IndicationAndUsage>
<Description>Diethylpropion Hydrochloride Tablets USP, 25 mg are available for oral administration as tablets containing 25 mg diethylpropion hydrochloride, USP. The inactive ingredients in each tablet are: microcrystalline cellulose, lactose monohydrate, mannitol, tartaric acid, povidone, talc, and zinc stearate. Diethylpropion hydrochloride is a sympathomimetic agent. The chemical name for diethylpropion hydrochloride is 1-phenyl-2-diethyl-amino-1-propanone hydrochloride. Its chemical structure is.</Description>
</NDC>
<NDC>
<NDCCode>71335-0175-6</NDCCode>
<PackageDescription>7 TABLET in 1 BOTTLE (71335-0175-6) </PackageDescription>
<NDC11Code>71335-0175-06</NDC11Code>
<ProductNDC>71335-0175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diethylpropion Hydrochloride</ProprietaryName>
<NonProprietaryName>Diethylpropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110718</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200177</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>DIETHYLPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-10-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20111021</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diethylpropion hydrochloride tablets USP, 25 mg are indicated in the management of exogenous obesity as a short-term adjunct (a few weeks) in a regimen of weight reduction based on caloric restriction in patients with an initial body mass index (BMI) of 30 kg/m2 or higher and who have not responded to appropriate weight reducing regimen (diet and/or exercise) alone. Below is a chart of BMI based on various heights and weights. BMI is calculated by taking the patient's weight, in kilograms (kg), divided by the patient's height, in meters (m), squared. Metric conversions are as follows: pounds divided by 2.2 = kg; inches × 0.0254 = meters. The usefulness of agents of this class (See CLINICAL PHARMACOLOGY) should be measured against possible risk factors inherent in their use such as those described below. Diethylpropion hydrochloride tablets USP, 25 mg are indicated for use as monotherapy only.</IndicationAndUsage>
<Description>Diethylpropion Hydrochloride Tablets USP, 25 mg are available for oral administration as tablets containing 25 mg diethylpropion hydrochloride, USP. The inactive ingredients in each tablet are: microcrystalline cellulose, lactose monohydrate, mannitol, tartaric acid, povidone, talc, and zinc stearate. Diethylpropion hydrochloride is a sympathomimetic agent. The chemical name for diethylpropion hydrochloride is 1-phenyl-2-diethyl-amino-1-propanone hydrochloride. Its chemical structure is.</Description>
</NDC>
<NDC>
<NDCCode>71335-0175-7</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (71335-0175-7) </PackageDescription>
<NDC11Code>71335-0175-07</NDC11Code>
<ProductNDC>71335-0175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diethylpropion Hydrochloride</ProprietaryName>
<NonProprietaryName>Diethylpropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110718</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200177</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>DIETHYLPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-10-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20111021</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diethylpropion hydrochloride tablets USP, 25 mg are indicated in the management of exogenous obesity as a short-term adjunct (a few weeks) in a regimen of weight reduction based on caloric restriction in patients with an initial body mass index (BMI) of 30 kg/m2 or higher and who have not responded to appropriate weight reducing regimen (diet and/or exercise) alone. Below is a chart of BMI based on various heights and weights. BMI is calculated by taking the patient's weight, in kilograms (kg), divided by the patient's height, in meters (m), squared. Metric conversions are as follows: pounds divided by 2.2 = kg; inches × 0.0254 = meters. The usefulness of agents of this class (See CLINICAL PHARMACOLOGY) should be measured against possible risk factors inherent in their use such as those described below. Diethylpropion hydrochloride tablets USP, 25 mg are indicated for use as monotherapy only.</IndicationAndUsage>
<Description>Diethylpropion Hydrochloride Tablets USP, 25 mg are available for oral administration as tablets containing 25 mg diethylpropion hydrochloride, USP. The inactive ingredients in each tablet are: microcrystalline cellulose, lactose monohydrate, mannitol, tartaric acid, povidone, talc, and zinc stearate. Diethylpropion hydrochloride is a sympathomimetic agent. The chemical name for diethylpropion hydrochloride is 1-phenyl-2-diethyl-amino-1-propanone hydrochloride. Its chemical structure is.</Description>
</NDC>
<NDC>
<NDCCode>71335-0175-8</NDCCode>
<PackageDescription>84 TABLET in 1 BOTTLE (71335-0175-8) </PackageDescription>
<NDC11Code>71335-0175-08</NDC11Code>
<ProductNDC>71335-0175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diethylpropion Hydrochloride</ProprietaryName>
<NonProprietaryName>Diethylpropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110718</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200177</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>DIETHYLPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-10-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20111021</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diethylpropion hydrochloride tablets USP, 25 mg are indicated in the management of exogenous obesity as a short-term adjunct (a few weeks) in a regimen of weight reduction based on caloric restriction in patients with an initial body mass index (BMI) of 30 kg/m2 or higher and who have not responded to appropriate weight reducing regimen (diet and/or exercise) alone. Below is a chart of BMI based on various heights and weights. BMI is calculated by taking the patient's weight, in kilograms (kg), divided by the patient's height, in meters (m), squared. Metric conversions are as follows: pounds divided by 2.2 = kg; inches × 0.0254 = meters. The usefulness of agents of this class (See CLINICAL PHARMACOLOGY) should be measured against possible risk factors inherent in their use such as those described below. Diethylpropion hydrochloride tablets USP, 25 mg are indicated for use as monotherapy only.</IndicationAndUsage>
<Description>Diethylpropion Hydrochloride Tablets USP, 25 mg are available for oral administration as tablets containing 25 mg diethylpropion hydrochloride, USP. The inactive ingredients in each tablet are: microcrystalline cellulose, lactose monohydrate, mannitol, tartaric acid, povidone, talc, and zinc stearate. Diethylpropion hydrochloride is a sympathomimetic agent. The chemical name for diethylpropion hydrochloride is 1-phenyl-2-diethyl-amino-1-propanone hydrochloride. Its chemical structure is.</Description>
</NDC>
<NDC>
<NDCCode>0316-0175-15</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (0316-0175-15) / 15 g in 1 TUBE</PackageDescription>
<NDC11Code>00316-0175-15</NDC11Code>
<ProductNDC>0316-0175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Triderm</ProprietaryName>
<NonProprietaryName>Triamcinolone Acetonide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19840319</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088042</ApplicationNumber>
<LabelerName>Crown Laboratories</LabelerName>
<SubstanceName>TRIAMCINOLONE ACETONIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150325</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Topical corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
<Description>The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. Triamcinolone acetonide is a member of this class. Triamcinolone acetonide is chemically pregna-1,4-diene-3,20-dione, 9-fluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis-(oxy)]-(11β, 16α)- with the empirical formula C 24H 31FO 6 and molecular weight 434.50. Its structural formula is:. Each gram of Triderm (Triamcinolone Acetonide Cream USP), 0.025% contains 0.25 mg triamcinolone acetonide USP in a cream base consisting of purified water, emulsifying wax, mineral oil, propylene glycol, sorbitol solution, cetyl palmitate, sorbic acid, and potassium sorbate. Each gram of Triderm (Triamcinolone Acetonide Cream USP), 0.1% contains 1 mg triamcinolone acetonide USP in a cream base consisting of purified water, emulsifying wax, mineral oil, propylene glycol, sorbitol solution, cetyl palmitate, sorbic acid, and potassium sorbate. Each gram of Triderm (Triamcinolone Acetonide Cream USP), 0.5% contains 5 mg triamcinolone acetonide USP in a cream base consisting of purified water, emulsifying wax, mineral oil, propylene glycol, sorbitol solution, cetyl palmitate, sorbic acid, and potassium sorbate.</Description>
</NDC>
<NDC>
<NDCCode>0316-0175-16</NDCCode>
<PackageDescription>1 JAR in 1 CARTON (0316-0175-16) / 454 g in 1 JAR</PackageDescription>
<NDC11Code>00316-0175-16</NDC11Code>
<ProductNDC>0316-0175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Triderm</ProprietaryName>
<NonProprietaryName>Triamcinolone Acetonide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19840319</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088042</ApplicationNumber>
<LabelerName>Crown Laboratories</LabelerName>
<SubstanceName>TRIAMCINOLONE ACETONIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Topical corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
<Description>The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. Triamcinolone acetonide is a member of this class. Triamcinolone acetonide is chemically pregna-1,4-diene-3,20-dione, 9-fluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis-(oxy)]-(11β, 16α)- with the empirical formula C 24H 31FO 6 and molecular weight 434.50. Its structural formula is:. Each gram of Triderm (Triamcinolone Acetonide Cream USP), 0.025% contains 0.25 mg triamcinolone acetonide USP in a cream base consisting of purified water, emulsifying wax, mineral oil, propylene glycol, sorbitol solution, cetyl palmitate, sorbic acid, and potassium sorbate. Each gram of Triderm (Triamcinolone Acetonide Cream USP), 0.1% contains 1 mg triamcinolone acetonide USP in a cream base consisting of purified water, emulsifying wax, mineral oil, propylene glycol, sorbitol solution, cetyl palmitate, sorbic acid, and potassium sorbate. Each gram of Triderm (Triamcinolone Acetonide Cream USP), 0.5% contains 5 mg triamcinolone acetonide USP in a cream base consisting of purified water, emulsifying wax, mineral oil, propylene glycol, sorbitol solution, cetyl palmitate, sorbic acid, and potassium sorbate.</Description>
</NDC>
<NDC>
<NDCCode>14141-175-01</NDCCode>
<PackageDescription>9 g in 1 JAR (14141-175-01) </PackageDescription>
<NDC11Code>14141-0175-01</NDC11Code>
<ProductNDC>14141-175</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Clarite Makeup For A Cleaner Appearance Spf 30 170-n</ProprietaryName>
<NonProprietaryName>Octinoxate, Zinc Oxide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200324</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>BEL STAR S A</LabelerName>
<SubstanceName>OCTINOXATE; ZINC OXIDE</SubstanceName>
<StrengthNumber>7.5; 7.84</StrengthNumber>
<StrengthUnit>g/100g; g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-12-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200324</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>16590-175-05</NDCCode>
<PackageDescription>5 mL in 1 BOTTLE, DROPPER (16590-175-05)</PackageDescription>
<NDC11Code>16590-0175-05</NDC11Code>
<ProductNDC>16590-175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ofloxacin</ProprietaryName>
<NonProprietaryName>Ofloxacin</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20040514</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076615</ApplicationNumber>
<LabelerName>STAT RX LLC USA</LabelerName>
<SubstanceName>OFLOXACIN</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Quinolone Antimicrobial [EPC],Quinolones [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Ofloxacin ophthalmic solution is indicated for the treatment of infections caused by susceptible strains of the following bacteria in the conditions listed below:. *Efficacy for this organism was studied in fewer than 10 infections.</IndicationAndUsage>
<Description>Ofloxacin ophthalmic solution 0.3% is a sterile ophthalmic solution. It is a fluorinated carboxyquinolone anti-infective for topical ophthalmic use. (±)-9-Fluoro-2, 3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4 benzoxazine-6-carboxylic acid. Contains. Active: ofloxacin 0.3% (3 mg/mL). Preservative: benzalkonium chloride (0.005%). Inactives: sodium chloride and purified water. May also contain hydrochloric acid and/or sodium hydroxide to adjust pH. Ofloxacin ophthalmic solution is unbuffered and formulated with a pH of 6.4 (range - 6.0 to 6.8). It has an osmolality of 300 mOsm/kg. Ofloxacin is a fluorinated 4-quinolone which differs from other fluorinated 4-quinolones in that there is a six member (pyridobenzoxazine) ring from positions 1 to 8 of the basic ring structure.</Description>
</NDC>
<NDC>
<NDCCode>36000-175-10</NDCCode>
<PackageDescription>10 VIAL in 1 PACKAGE (36000-175-10) > 1 INJECTION in 1 VIAL (36000-175-01)</PackageDescription>
<NDC11Code>36000-0175-10</NDC11Code>
<ProductNDC>36000-175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nafcillin</ProprietaryName>
<NonProprietaryName>Nafcillin</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20120201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090560</ApplicationNumber>
<LabelerName>Claris Lifesciences, Inc.</LabelerName>
<SubstanceName>NAFCILLIN SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC],Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Nafcillin is indicated in the treatment of infections caused by penicillinase-producing staphylococci which have demonstrated susceptibility to the drug. Culture and susceptibility tests should be performed initially to determine the causative organism and its susceptibility to the drug (see CLINICAL PHARMACOLOGY - Susceptibility Tests). Nafcillin may be used to initiate therapy in suspected cases of resistant staphylococcal infections prior to the availability of susceptibility test results. Nafcillin should not be used in infections caused by organisms susceptible to penicillin G. If the susceptibility tests indicate that the infection is due to an organism other than a resistant Staphylococcus, therapy should not be continued with Nafcillin for Injection, USP. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Nafcillin for Injection and other antibacterial drugs, Nafcillin for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Nafcillin for Injection, USP is a sterile semisynthetic penicillin derived from 6-amino-penicillanic acid. It is the sodium salt in a parenteral dosage form. The chemical name of nafcillin sodium is Monosodium (2S, 5R, 6R)-6-(2-ethoxy-1-naphthamido)-3, 3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate monohydrate. It is resistant to inactivation by the enzyme penicillinase (beta-lactamase). The structural formula of nafcillin sodium is as follows:. C21H21N2NaO5S H2O MW=454.48. Nafcillin for Injection, USP is available as a white to off-white crystalline dry powder for reconstitution. The reconstituted solution is a clear and colorless solution. Nafcillin for Injection contains nafcillin sodium as the monohydrate equivalent to 1 gram or 2 grams of nafcillin per vial. The sodium content is 66 mg [2.9 mEq] per gram nafcillin. This product is buffered with approximately 38 mg sodium citrate per gram.</Description>
</NDC>
<NDC>
<NDCCode>49288-0175-1</NDCCode>
<PackageDescription>2 mL in 1 VIAL, MULTI-DOSE (49288-0175-1)</PackageDescription>
<NDC11Code>49288-0175-01</NDC11Code>
<ProductNDC>49288-0175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite, Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Standardized Mite, Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19911022</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102224</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS],Insect Proteins [CS],Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>INDICATIONS AND USAGE Standardized Mite allergenic extract is indicated for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. An orderly approach to the diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing. Mite mixtures should not be used for diagnostic skin testing. The individual mites should be used. Mite mixtures may be used for immunotherapy to treat patients who demonstrated sensitivity to both D. farinae and D. pteronyssinus mites. Patients who react to both D. farinae and D. pteronyssinus have demonstrated a significant cross-reactivity. Caution should be used in escalating treatment with mite mixtures.21PRICK-PUNCTURE TESTING: A positive control using Histamine Phosphate is important to identify those patients whose skin may not be reactive due to medications, metabolic or other reasons. A diluent control, if negative, would exclude false-positive reactions due to ingredients in the diluent or patients who have dermatographism. To identify highly sensitive individuals and as a safety precaution, it is recommended that prick-puncture test using a drop of the extract concentrate (10,000 AU/ml) be performed prior to initiating very dilute intradermal testing. Prick-puncture testing is performed by placing a drop of extract concentrate on the skin and puncturing the skin through the drop with a small needle such as a bifurcated vaccinating needle. The most satisfactory sites on the back for skin testing are from the posterior axillary fold to 2.5 cm from the spinal column, and from the top of the scapula to the lower rib margins. The best areas on the arms are the volar surfaces from the axilla to 2.5 or 5 cm above the wrist, skipping the anticubital space. Glycerinated Mite extracts containing 10,000 AU/ml are recommended for prick-puncture testing. Skin reactions are based on size of erythema and wheal. For interpretation of skin reactions, refer to chart below. Smaller, less conclusive reactions may be considered positive in conjunction with a definitive history of symptoms on exposure to the mite allergen. The more sensitive the patient the higher the probability that he/she will have symptoms related to the exposure of the offending allergen. Hence, the importance of a good patient history. Less sensitive individuals can be tested intradermally with an appropriately diluted extract. A clinical study using the same patients with positive prick-puncture test (10) using the ID50EAL Method, Intradermal Dilution for 50 mm Sum of Erythema D50 Determines the Allergy Unit, has demonstrated the following: Skin test by prick-puncture test using Standardized D. farinae Mite, 10,000 AU/ml was performed in 10 patients. The mean sum of erythema diameter was 76.6 mm (Range 45-104 mm). Skin test by prick-puncture test using Standardized D. pteronyssinus Mite, 10,000 AU/ml in 10 patients, the mean sum of erythema diameter was 74.7 mm (Range 43-109 mm). *C = Concentration. SINGLE DILUTION INTRADERMAL TESTING: The surface of the upper and lower arm is the usual location for skin testing. It is important that a new, sterile, disposable syringe and needle be used for each extract tested. Intracutaneous test dilutions should be made with aqueous diluent. (1) Start testing with the most dilute allergenic extract concentration. (2) A volume of 0.02-0.05 ml should be injected slowly into the superficial skin layers making a small bleb (superficial wheal). (3) For patients without a history of extreme sensitivity, a prick-puncture test of less than 2+, the initial dilution for skin testing should contain 0.02 to 0.06 AU/ml (see Table I). For very sensitive patients with a prick-puncture of greater than 2+, a further dilution should be made to 0.002 to 0.006 AU/ml (see Table I). If after 20 minutes no skin reaction is obtained, continue the testing using five-fold or ten-fold increments in potency until a reaction of 1+ or until the concentration of 2,000 AU (five-fold) or 1,000 AU (ten-fold) has been tested with a glycerine control. Glycerine may be used at a dilution of 0.5% as long as 0.5% glycerine produces negative control. The diluent should be tested and included in the interpretation of the skin reactions.16 INTRADERMAL TESTING–SKIN ENDPOINT TITRATION: The allergenic extracts to which the patient is sensitive, the patient's degree of sensitivity and the dose of allergen to be used in immunotherapy can be determined through the use of intracutaneous skin tests involving progressive five-fold dilutions of allergenic extracts, prepared and refrigerated at 2-8° C. The critical variable is the size if the wheal and erythema produced by the intracutaneous injection of 0.01 to 0.02 ml of the test allergen producing a 4 mm diameter superficial skin wheal. For patients demonstrating a prick-puncture skin test of less than 2+, an initial screening dilution of 0.02-0.06 AU/ml is safe (see Table I). For patients demonstrating a prick-puncture skin test greater than 2+, an initial screening dilution of 0.002 to 0.006 AU/ml is safe. The skin endpoint is detected by noting the dilution that produces a wheal 2 mm larger than non-reacting dilutions (5 mm negative wheal) until progressive whealing with each five-fold increase in test potency occurs, i.e., a 5 mm (negative), 7 mm, 9 mm, 11 mm is the normal sequence of whealing. The 7 mm wheal would be the endpoint. The endpoint dilution is used as an initial dose concentration for immunotherapy. An endpoint dose of 0.15 ml is a safe initial dose to be followed by escalation to the optimal maximum tolerated dose for each individual. Using Standardized D. farinae Mite, 10,000 AU/ml on 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.4). Using Standardized D. pteronyssinus Mite 10,000 AU/ml in 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.7).</IndicationAndUsage>
<Description>DESCRIPTION The extract is sterile and intended for dilution prior to skin testing and/or immunotherapy. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. The route of administration for immunotherapy is subcutaneous. The designation AU/ml (Allergy Units per ml) is unitage based upon the relative potency of this standardized mite extract when compared by ELISA competition to the F.D.A. Mite Allergenic Reference Standard labeled 10,000 AU/ml assigned on the basis of quantitative skin testing by the ID50EAL Method.1,2,3,4,5,16 Lower concentrations (e.g. 5,000 AU/ml and 3,000 AU/ml) are prepared by dilution of stock concentrates. Mite mixtures containing equal volumes of D. farinae and D. pteronyssinus are available at 5,000 AU/ml, 2,500 AU/ml and 1,500 AU/ml. Active allergens are described by common and scientific name on the stock concentrate container label. INGREDIENTS: Extract of Standardized Mites contain at least 99.0% adult mites and mite stages. This product may contain trace amounts of yeast and/or pork products; sodium chloride 0.95%; sodium bicarbonate 0.24%; 50% v/v glycerine as stabilizing agent and preservative. Following is a brief description of the standardized quality procedures applied to these extracts: 1. The source material is carefully selected from whole body adult mites and mite stages cultured from a medium containing no material of human origin. The source material is extracted with a saline buffer and 50% v/v glycerine. 2. Several manufacturers submitted intradermal skin test data on Biopol Laboratories mite medium extract using patients who were puncture test positive (erythema greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (erythema greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive to the mite extract and who were also skin test positive to the mite medium extract were also skin tested by the puncture method with an extract of yeast (Saccharomyces sp.) and were positive. 3. A ninhydrin protein analysis is completed to compare with the standard extract. 4. Each lot is standardized against the F.D.A. reference standard extract for total biologic activity by means of ELISA competition. 5. The standardized mite extract is analyzed for glycerine content to insure a minimum of 50% v/v glycerine for optimal stability during the entire dating period.</Description>
</NDC>
<NDC>
<NDCCode>49288-0175-2</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (49288-0175-2)</PackageDescription>
<NDC11Code>49288-0175-02</NDC11Code>
<ProductNDC>49288-0175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite, Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Standardized Mite, Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19911022</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102224</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS],Insect Proteins [CS],Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>INDICATIONS AND USAGE Standardized Mite allergenic extract is indicated for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. An orderly approach to the diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing. Mite mixtures should not be used for diagnostic skin testing. The individual mites should be used. Mite mixtures may be used for immunotherapy to treat patients who demonstrated sensitivity to both D. farinae and D. pteronyssinus mites. Patients who react to both D. farinae and D. pteronyssinus have demonstrated a significant cross-reactivity. Caution should be used in escalating treatment with mite mixtures.21PRICK-PUNCTURE TESTING: A positive control using Histamine Phosphate is important to identify those patients whose skin may not be reactive due to medications, metabolic or other reasons. A diluent control, if negative, would exclude false-positive reactions due to ingredients in the diluent or patients who have dermatographism. To identify highly sensitive individuals and as a safety precaution, it is recommended that prick-puncture test using a drop of the extract concentrate (10,000 AU/ml) be performed prior to initiating very dilute intradermal testing. Prick-puncture testing is performed by placing a drop of extract concentrate on the skin and puncturing the skin through the drop with a small needle such as a bifurcated vaccinating needle. The most satisfactory sites on the back for skin testing are from the posterior axillary fold to 2.5 cm from the spinal column, and from the top of the scapula to the lower rib margins. The best areas on the arms are the volar surfaces from the axilla to 2.5 or 5 cm above the wrist, skipping the anticubital space. Glycerinated Mite extracts containing 10,000 AU/ml are recommended for prick-puncture testing. Skin reactions are based on size of erythema and wheal. For interpretation of skin reactions, refer to chart below. Smaller, less conclusive reactions may be considered positive in conjunction with a definitive history of symptoms on exposure to the mite allergen. The more sensitive the patient the higher the probability that he/she will have symptoms related to the exposure of the offending allergen. Hence, the importance of a good patient history. Less sensitive individuals can be tested intradermally with an appropriately diluted extract. A clinical study using the same patients with positive prick-puncture test (10) using the ID50EAL Method, Intradermal Dilution for 50 mm Sum of Erythema D50 Determines the Allergy Unit, has demonstrated the following: Skin test by prick-puncture test using Standardized D. farinae Mite, 10,000 AU/ml was performed in 10 patients. The mean sum of erythema diameter was 76.6 mm (Range 45-104 mm). Skin test by prick-puncture test using Standardized D. pteronyssinus Mite, 10,000 AU/ml in 10 patients, the mean sum of erythema diameter was 74.7 mm (Range 43-109 mm). *C = Concentration. SINGLE DILUTION INTRADERMAL TESTING: The surface of the upper and lower arm is the usual location for skin testing. It is important that a new, sterile, disposable syringe and needle be used for each extract tested. Intracutaneous test dilutions should be made with aqueous diluent. (1) Start testing with the most dilute allergenic extract concentration. (2) A volume of 0.02-0.05 ml should be injected slowly into the superficial skin layers making a small bleb (superficial wheal). (3) For patients without a history of extreme sensitivity, a prick-puncture test of less than 2+, the initial dilution for skin testing should contain 0.02 to 0.06 AU/ml (see Table I). For very sensitive patients with a prick-puncture of greater than 2+, a further dilution should be made to 0.002 to 0.006 AU/ml (see Table I). If after 20 minutes no skin reaction is obtained, continue the testing using five-fold or ten-fold increments in potency until a reaction of 1+ or until the concentration of 2,000 AU (five-fold) or 1,000 AU (ten-fold) has been tested with a glycerine control. Glycerine may be used at a dilution of 0.5% as long as 0.5% glycerine produces negative control. The diluent should be tested and included in the interpretation of the skin reactions.16 INTRADERMAL TESTING–SKIN ENDPOINT TITRATION: The allergenic extracts to which the patient is sensitive, the patient's degree of sensitivity and the dose of allergen to be used in immunotherapy can be determined through the use of intracutaneous skin tests involving progressive five-fold dilutions of allergenic extracts, prepared and refrigerated at 2-8° C. The critical variable is the size if the wheal and erythema produced by the intracutaneous injection of 0.01 to 0.02 ml of the test allergen producing a 4 mm diameter superficial skin wheal. For patients demonstrating a prick-puncture skin test of less than 2+, an initial screening dilution of 0.02-0.06 AU/ml is safe (see Table I). For patients demonstrating a prick-puncture skin test greater than 2+, an initial screening dilution of 0.002 to 0.006 AU/ml is safe. The skin endpoint is detected by noting the dilution that produces a wheal 2 mm larger than non-reacting dilutions (5 mm negative wheal) until progressive whealing with each five-fold increase in test potency occurs, i.e., a 5 mm (negative), 7 mm, 9 mm, 11 mm is the normal sequence of whealing. The 7 mm wheal would be the endpoint. The endpoint dilution is used as an initial dose concentration for immunotherapy. An endpoint dose of 0.15 ml is a safe initial dose to be followed by escalation to the optimal maximum tolerated dose for each individual. Using Standardized D. farinae Mite, 10,000 AU/ml on 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.4). Using Standardized D. pteronyssinus Mite 10,000 AU/ml in 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.7).</IndicationAndUsage>
<Description>DESCRIPTION The extract is sterile and intended for dilution prior to skin testing and/or immunotherapy. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. The route of administration for immunotherapy is subcutaneous. The designation AU/ml (Allergy Units per ml) is unitage based upon the relative potency of this standardized mite extract when compared by ELISA competition to the F.D.A. Mite Allergenic Reference Standard labeled 10,000 AU/ml assigned on the basis of quantitative skin testing by the ID50EAL Method.1,2,3,4,5,16 Lower concentrations (e.g. 5,000 AU/ml and 3,000 AU/ml) are prepared by dilution of stock concentrates. Mite mixtures containing equal volumes of D. farinae and D. pteronyssinus are available at 5,000 AU/ml, 2,500 AU/ml and 1,500 AU/ml. Active allergens are described by common and scientific name on the stock concentrate container label. INGREDIENTS: Extract of Standardized Mites contain at least 99.0% adult mites and mite stages. This product may contain trace amounts of yeast and/or pork products; sodium chloride 0.95%; sodium bicarbonate 0.24%; 50% v/v glycerine as stabilizing agent and preservative. Following is a brief description of the standardized quality procedures applied to these extracts: 1. The source material is carefully selected from whole body adult mites and mite stages cultured from a medium containing no material of human origin. The source material is extracted with a saline buffer and 50% v/v glycerine. 2. Several manufacturers submitted intradermal skin test data on Biopol Laboratories mite medium extract using patients who were puncture test positive (erythema greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (erythema greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive to the mite extract and who were also skin test positive to the mite medium extract were also skin tested by the puncture method with an extract of yeast (Saccharomyces sp.) and were positive. 3. A ninhydrin protein analysis is completed to compare with the standard extract. 4. Each lot is standardized against the F.D.A. reference standard extract for total biologic activity by means of ELISA competition. 5. The standardized mite extract is analyzed for glycerine content to insure a minimum of 50% v/v glycerine for optimal stability during the entire dating period.</Description>
</NDC>
<NDC>
<NDCCode>49288-0175-3</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0175-3)</PackageDescription>
<NDC11Code>49288-0175-03</NDC11Code>
<ProductNDC>49288-0175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite, Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Standardized Mite, Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19911022</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102224</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS],Insect Proteins [CS],Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>INDICATIONS AND USAGE Standardized Mite allergenic extract is indicated for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. An orderly approach to the diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing. Mite mixtures should not be used for diagnostic skin testing. The individual mites should be used. Mite mixtures may be used for immunotherapy to treat patients who demonstrated sensitivity to both D. farinae and D. pteronyssinus mites. Patients who react to both D. farinae and D. pteronyssinus have demonstrated a significant cross-reactivity. Caution should be used in escalating treatment with mite mixtures.21PRICK-PUNCTURE TESTING: A positive control using Histamine Phosphate is important to identify those patients whose skin may not be reactive due to medications, metabolic or other reasons. A diluent control, if negative, would exclude false-positive reactions due to ingredients in the diluent or patients who have dermatographism. To identify highly sensitive individuals and as a safety precaution, it is recommended that prick-puncture test using a drop of the extract concentrate (10,000 AU/ml) be performed prior to initiating very dilute intradermal testing. Prick-puncture testing is performed by placing a drop of extract concentrate on the skin and puncturing the skin through the drop with a small needle such as a bifurcated vaccinating needle. The most satisfactory sites on the back for skin testing are from the posterior axillary fold to 2.5 cm from the spinal column, and from the top of the scapula to the lower rib margins. The best areas on the arms are the volar surfaces from the axilla to 2.5 or 5 cm above the wrist, skipping the anticubital space. Glycerinated Mite extracts containing 10,000 AU/ml are recommended for prick-puncture testing. Skin reactions are based on size of erythema and wheal. For interpretation of skin reactions, refer to chart below. Smaller, less conclusive reactions may be considered positive in conjunction with a definitive history of symptoms on exposure to the mite allergen. The more sensitive the patient the higher the probability that he/she will have symptoms related to the exposure of the offending allergen. Hence, the importance of a good patient history. Less sensitive individuals can be tested intradermally with an appropriately diluted extract. A clinical study using the same patients with positive prick-puncture test (10) using the ID50EAL Method, Intradermal Dilution for 50 mm Sum of Erythema D50 Determines the Allergy Unit, has demonstrated the following: Skin test by prick-puncture test using Standardized D. farinae Mite, 10,000 AU/ml was performed in 10 patients. The mean sum of erythema diameter was 76.6 mm (Range 45-104 mm). Skin test by prick-puncture test using Standardized D. pteronyssinus Mite, 10,000 AU/ml in 10 patients, the mean sum of erythema diameter was 74.7 mm (Range 43-109 mm). *C = Concentration. SINGLE DILUTION INTRADERMAL TESTING: The surface of the upper and lower arm is the usual location for skin testing. It is important that a new, sterile, disposable syringe and needle be used for each extract tested. Intracutaneous test dilutions should be made with aqueous diluent. (1) Start testing with the most dilute allergenic extract concentration. (2) A volume of 0.02-0.05 ml should be injected slowly into the superficial skin layers making a small bleb (superficial wheal). (3) For patients without a history of extreme sensitivity, a prick-puncture test of less than 2+, the initial dilution for skin testing should contain 0.02 to 0.06 AU/ml (see Table I). For very sensitive patients with a prick-puncture of greater than 2+, a further dilution should be made to 0.002 to 0.006 AU/ml (see Table I). If after 20 minutes no skin reaction is obtained, continue the testing using five-fold or ten-fold increments in potency until a reaction of 1+ or until the concentration of 2,000 AU (five-fold) or 1,000 AU (ten-fold) has been tested with a glycerine control. Glycerine may be used at a dilution of 0.5% as long as 0.5% glycerine produces negative control. The diluent should be tested and included in the interpretation of the skin reactions.16 INTRADERMAL TESTING–SKIN ENDPOINT TITRATION: The allergenic extracts to which the patient is sensitive, the patient's degree of sensitivity and the dose of allergen to be used in immunotherapy can be determined through the use of intracutaneous skin tests involving progressive five-fold dilutions of allergenic extracts, prepared and refrigerated at 2-8° C. The critical variable is the size if the wheal and erythema produced by the intracutaneous injection of 0.01 to 0.02 ml of the test allergen producing a 4 mm diameter superficial skin wheal. For patients demonstrating a prick-puncture skin test of less than 2+, an initial screening dilution of 0.02-0.06 AU/ml is safe (see Table I). For patients demonstrating a prick-puncture skin test greater than 2+, an initial screening dilution of 0.002 to 0.006 AU/ml is safe. The skin endpoint is detected by noting the dilution that produces a wheal 2 mm larger than non-reacting dilutions (5 mm negative wheal) until progressive whealing with each five-fold increase in test potency occurs, i.e., a 5 mm (negative), 7 mm, 9 mm, 11 mm is the normal sequence of whealing. The 7 mm wheal would be the endpoint. The endpoint dilution is used as an initial dose concentration for immunotherapy. An endpoint dose of 0.15 ml is a safe initial dose to be followed by escalation to the optimal maximum tolerated dose for each individual. Using Standardized D. farinae Mite, 10,000 AU/ml on 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.4). Using Standardized D. pteronyssinus Mite 10,000 AU/ml in 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.7).</IndicationAndUsage>
<Description>DESCRIPTION The extract is sterile and intended for dilution prior to skin testing and/or immunotherapy. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. The route of administration for immunotherapy is subcutaneous. The designation AU/ml (Allergy Units per ml) is unitage based upon the relative potency of this standardized mite extract when compared by ELISA competition to the F.D.A. Mite Allergenic Reference Standard labeled 10,000 AU/ml assigned on the basis of quantitative skin testing by the ID50EAL Method.1,2,3,4,5,16 Lower concentrations (e.g. 5,000 AU/ml and 3,000 AU/ml) are prepared by dilution of stock concentrates. Mite mixtures containing equal volumes of D. farinae and D. pteronyssinus are available at 5,000 AU/ml, 2,500 AU/ml and 1,500 AU/ml. Active allergens are described by common and scientific name on the stock concentrate container label. INGREDIENTS: Extract of Standardized Mites contain at least 99.0% adult mites and mite stages. This product may contain trace amounts of yeast and/or pork products; sodium chloride 0.95%; sodium bicarbonate 0.24%; 50% v/v glycerine as stabilizing agent and preservative. Following is a brief description of the standardized quality procedures applied to these extracts: 1. The source material is carefully selected from whole body adult mites and mite stages cultured from a medium containing no material of human origin. The source material is extracted with a saline buffer and 50% v/v glycerine. 2. Several manufacturers submitted intradermal skin test data on Biopol Laboratories mite medium extract using patients who were puncture test positive (erythema greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (erythema greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive to the mite extract and who were also skin test positive to the mite medium extract were also skin tested by the puncture method with an extract of yeast (Saccharomyces sp.) and were positive. 3. A ninhydrin protein analysis is completed to compare with the standard extract. 4. Each lot is standardized against the F.D.A. reference standard extract for total biologic activity by means of ELISA competition. 5. The standardized mite extract is analyzed for glycerine content to insure a minimum of 50% v/v glycerine for optimal stability during the entire dating period.</Description>
</NDC>
<NDC>
<NDCCode>49288-0175-4</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49288-0175-4)</PackageDescription>
<NDC11Code>49288-0175-04</NDC11Code>
<ProductNDC>49288-0175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite, Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Standardized Mite, Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19911022</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102224</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS],Insect Proteins [CS],Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>INDICATIONS AND USAGE Standardized Mite allergenic extract is indicated for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. An orderly approach to the diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing. Mite mixtures should not be used for diagnostic skin testing. The individual mites should be used. Mite mixtures may be used for immunotherapy to treat patients who demonstrated sensitivity to both D. farinae and D. pteronyssinus mites. Patients who react to both D. farinae and D. pteronyssinus have demonstrated a significant cross-reactivity. Caution should be used in escalating treatment with mite mixtures.21PRICK-PUNCTURE TESTING: A positive control using Histamine Phosphate is important to identify those patients whose skin may not be reactive due to medications, metabolic or other reasons. A diluent control, if negative, would exclude false-positive reactions due to ingredients in the diluent or patients who have dermatographism. To identify highly sensitive individuals and as a safety precaution, it is recommended that prick-puncture test using a drop of the extract concentrate (10,000 AU/ml) be performed prior to initiating very dilute intradermal testing. Prick-puncture testing is performed by placing a drop of extract concentrate on the skin and puncturing the skin through the drop with a small needle such as a bifurcated vaccinating needle. The most satisfactory sites on the back for skin testing are from the posterior axillary fold to 2.5 cm from the spinal column, and from the top of the scapula to the lower rib margins. The best areas on the arms are the volar surfaces from the axilla to 2.5 or 5 cm above the wrist, skipping the anticubital space. Glycerinated Mite extracts containing 10,000 AU/ml are recommended for prick-puncture testing. Skin reactions are based on size of erythema and wheal. For interpretation of skin reactions, refer to chart below. Smaller, less conclusive reactions may be considered positive in conjunction with a definitive history of symptoms on exposure to the mite allergen. The more sensitive the patient the higher the probability that he/she will have symptoms related to the exposure of the offending allergen. Hence, the importance of a good patient history. Less sensitive individuals can be tested intradermally with an appropriately diluted extract. A clinical study using the same patients with positive prick-puncture test (10) using the ID50EAL Method, Intradermal Dilution for 50 mm Sum of Erythema D50 Determines the Allergy Unit, has demonstrated the following: Skin test by prick-puncture test using Standardized D. farinae Mite, 10,000 AU/ml was performed in 10 patients. The mean sum of erythema diameter was 76.6 mm (Range 45-104 mm). Skin test by prick-puncture test using Standardized D. pteronyssinus Mite, 10,000 AU/ml in 10 patients, the mean sum of erythema diameter was 74.7 mm (Range 43-109 mm). *C = Concentration. SINGLE DILUTION INTRADERMAL TESTING: The surface of the upper and lower arm is the usual location for skin testing. It is important that a new, sterile, disposable syringe and needle be used for each extract tested. Intracutaneous test dilutions should be made with aqueous diluent. (1) Start testing with the most dilute allergenic extract concentration. (2) A volume of 0.02-0.05 ml should be injected slowly into the superficial skin layers making a small bleb (superficial wheal). (3) For patients without a history of extreme sensitivity, a prick-puncture test of less than 2+, the initial dilution for skin testing should contain 0.02 to 0.06 AU/ml (see Table I). For very sensitive patients with a prick-puncture of greater than 2+, a further dilution should be made to 0.002 to 0.006 AU/ml (see Table I). If after 20 minutes no skin reaction is obtained, continue the testing using five-fold or ten-fold increments in potency until a reaction of 1+ or until the concentration of 2,000 AU (five-fold) or 1,000 AU (ten-fold) has been tested with a glycerine control. Glycerine may be used at a dilution of 0.5% as long as 0.5% glycerine produces negative control. The diluent should be tested and included in the interpretation of the skin reactions.16 INTRADERMAL TESTING–SKIN ENDPOINT TITRATION: The allergenic extracts to which the patient is sensitive, the patient's degree of sensitivity and the dose of allergen to be used in immunotherapy can be determined through the use of intracutaneous skin tests involving progressive five-fold dilutions of allergenic extracts, prepared and refrigerated at 2-8° C. The critical variable is the size if the wheal and erythema produced by the intracutaneous injection of 0.01 to 0.02 ml of the test allergen producing a 4 mm diameter superficial skin wheal. For patients demonstrating a prick-puncture skin test of less than 2+, an initial screening dilution of 0.02-0.06 AU/ml is safe (see Table I). For patients demonstrating a prick-puncture skin test greater than 2+, an initial screening dilution of 0.002 to 0.006 AU/ml is safe. The skin endpoint is detected by noting the dilution that produces a wheal 2 mm larger than non-reacting dilutions (5 mm negative wheal) until progressive whealing with each five-fold increase in test potency occurs, i.e., a 5 mm (negative), 7 mm, 9 mm, 11 mm is the normal sequence of whealing. The 7 mm wheal would be the endpoint. The endpoint dilution is used as an initial dose concentration for immunotherapy. An endpoint dose of 0.15 ml is a safe initial dose to be followed by escalation to the optimal maximum tolerated dose for each individual. Using Standardized D. farinae Mite, 10,000 AU/ml on 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.4). Using Standardized D. pteronyssinus Mite 10,000 AU/ml in 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.7).</IndicationAndUsage>
<Description>DESCRIPTION The extract is sterile and intended for dilution prior to skin testing and/or immunotherapy. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. The route of administration for immunotherapy is subcutaneous. The designation AU/ml (Allergy Units per ml) is unitage based upon the relative potency of this standardized mite extract when compared by ELISA competition to the F.D.A. Mite Allergenic Reference Standard labeled 10,000 AU/ml assigned on the basis of quantitative skin testing by the ID50EAL Method.1,2,3,4,5,16 Lower concentrations (e.g. 5,000 AU/ml and 3,000 AU/ml) are prepared by dilution of stock concentrates. Mite mixtures containing equal volumes of D. farinae and D. pteronyssinus are available at 5,000 AU/ml, 2,500 AU/ml and 1,500 AU/ml. Active allergens are described by common and scientific name on the stock concentrate container label. INGREDIENTS: Extract of Standardized Mites contain at least 99.0% adult mites and mite stages. This product may contain trace amounts of yeast and/or pork products; sodium chloride 0.95%; sodium bicarbonate 0.24%; 50% v/v glycerine as stabilizing agent and preservative. Following is a brief description of the standardized quality procedures applied to these extracts: 1. The source material is carefully selected from whole body adult mites and mite stages cultured from a medium containing no material of human origin. The source material is extracted with a saline buffer and 50% v/v glycerine. 2. Several manufacturers submitted intradermal skin test data on Biopol Laboratories mite medium extract using patients who were puncture test positive (erythema greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (erythema greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive to the mite extract and who were also skin test positive to the mite medium extract were also skin tested by the puncture method with an extract of yeast (Saccharomyces sp.) and were positive. 3. A ninhydrin protein analysis is completed to compare with the standard extract. 4. Each lot is standardized against the F.D.A. reference standard extract for total biologic activity by means of ELISA competition. 5. The standardized mite extract is analyzed for glycerine content to insure a minimum of 50% v/v glycerine for optimal stability during the entire dating period.</Description>
</NDC>
<NDC>
<NDCCode>49288-0175-5</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49288-0175-5)</PackageDescription>
<NDC11Code>49288-0175-05</NDC11Code>
<ProductNDC>49288-0175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Mite, Dermatophagoides Farinae</ProprietaryName>
<NonProprietaryName>Standardized Mite, Dermatophagoides Farinae</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19911022</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102224</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[AU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS],Insect Proteins [CS],Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>INDICATIONS AND USAGE Standardized Mite allergenic extract is indicated for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. An orderly approach to the diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing. Mite mixtures should not be used for diagnostic skin testing. The individual mites should be used. Mite mixtures may be used for immunotherapy to treat patients who demonstrated sensitivity to both D. farinae and D. pteronyssinus mites. Patients who react to both D. farinae and D. pteronyssinus have demonstrated a significant cross-reactivity. Caution should be used in escalating treatment with mite mixtures.21PRICK-PUNCTURE TESTING: A positive control using Histamine Phosphate is important to identify those patients whose skin may not be reactive due to medications, metabolic or other reasons. A diluent control, if negative, would exclude false-positive reactions due to ingredients in the diluent or patients who have dermatographism. To identify highly sensitive individuals and as a safety precaution, it is recommended that prick-puncture test using a drop of the extract concentrate (10,000 AU/ml) be performed prior to initiating very dilute intradermal testing. Prick-puncture testing is performed by placing a drop of extract concentrate on the skin and puncturing the skin through the drop with a small needle such as a bifurcated vaccinating needle. The most satisfactory sites on the back for skin testing are from the posterior axillary fold to 2.5 cm from the spinal column, and from the top of the scapula to the lower rib margins. The best areas on the arms are the volar surfaces from the axilla to 2.5 or 5 cm above the wrist, skipping the anticubital space. Glycerinated Mite extracts containing 10,000 AU/ml are recommended for prick-puncture testing. Skin reactions are based on size of erythema and wheal. For interpretation of skin reactions, refer to chart below. Smaller, less conclusive reactions may be considered positive in conjunction with a definitive history of symptoms on exposure to the mite allergen. The more sensitive the patient the higher the probability that he/she will have symptoms related to the exposure of the offending allergen. Hence, the importance of a good patient history. Less sensitive individuals can be tested intradermally with an appropriately diluted extract. A clinical study using the same patients with positive prick-puncture test (10) using the ID50EAL Method, Intradermal Dilution for 50 mm Sum of Erythema D50 Determines the Allergy Unit, has demonstrated the following: Skin test by prick-puncture test using Standardized D. farinae Mite, 10,000 AU/ml was performed in 10 patients. The mean sum of erythema diameter was 76.6 mm (Range 45-104 mm). Skin test by prick-puncture test using Standardized D. pteronyssinus Mite, 10,000 AU/ml in 10 patients, the mean sum of erythema diameter was 74.7 mm (Range 43-109 mm). *C = Concentration. SINGLE DILUTION INTRADERMAL TESTING: The surface of the upper and lower arm is the usual location for skin testing. It is important that a new, sterile, disposable syringe and needle be used for each extract tested. Intracutaneous test dilutions should be made with aqueous diluent. (1) Start testing with the most dilute allergenic extract concentration. (2) A volume of 0.02-0.05 ml should be injected slowly into the superficial skin layers making a small bleb (superficial wheal). (3) For patients without a history of extreme sensitivity, a prick-puncture test of less than 2+, the initial dilution for skin testing should contain 0.02 to 0.06 AU/ml (see Table I). For very sensitive patients with a prick-puncture of greater than 2+, a further dilution should be made to 0.002 to 0.006 AU/ml (see Table I). If after 20 minutes no skin reaction is obtained, continue the testing using five-fold or ten-fold increments in potency until a reaction of 1+ or until the concentration of 2,000 AU (five-fold) or 1,000 AU (ten-fold) has been tested with a glycerine control. Glycerine may be used at a dilution of 0.5% as long as 0.5% glycerine produces negative control. The diluent should be tested and included in the interpretation of the skin reactions.16 INTRADERMAL TESTING–SKIN ENDPOINT TITRATION: The allergenic extracts to which the patient is sensitive, the patient's degree of sensitivity and the dose of allergen to be used in immunotherapy can be determined through the use of intracutaneous skin tests involving progressive five-fold dilutions of allergenic extracts, prepared and refrigerated at 2-8° C. The critical variable is the size if the wheal and erythema produced by the intracutaneous injection of 0.01 to 0.02 ml of the test allergen producing a 4 mm diameter superficial skin wheal. For patients demonstrating a prick-puncture skin test of less than 2+, an initial screening dilution of 0.02-0.06 AU/ml is safe (see Table I). For patients demonstrating a prick-puncture skin test greater than 2+, an initial screening dilution of 0.002 to 0.006 AU/ml is safe. The skin endpoint is detected by noting the dilution that produces a wheal 2 mm larger than non-reacting dilutions (5 mm negative wheal) until progressive whealing with each five-fold increase in test potency occurs, i.e., a 5 mm (negative), 7 mm, 9 mm, 11 mm is the normal sequence of whealing. The 7 mm wheal would be the endpoint. The endpoint dilution is used as an initial dose concentration for immunotherapy. An endpoint dose of 0.15 ml is a safe initial dose to be followed by escalation to the optimal maximum tolerated dose for each individual. Using Standardized D. farinae Mite, 10,000 AU/ml on 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.4). Using Standardized D. pteronyssinus Mite 10,000 AU/ml in 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.7).</IndicationAndUsage>
<Description>DESCRIPTION The extract is sterile and intended for dilution prior to skin testing and/or immunotherapy. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. The route of administration for immunotherapy is subcutaneous. The designation AU/ml (Allergy Units per ml) is unitage based upon the relative potency of this standardized mite extract when compared by ELISA competition to the F.D.A. Mite Allergenic Reference Standard labeled 10,000 AU/ml assigned on the basis of quantitative skin testing by the ID50EAL Method.1,2,3,4,5,16 Lower concentrations (e.g. 5,000 AU/ml and 3,000 AU/ml) are prepared by dilution of stock concentrates. Mite mixtures containing equal volumes of D. farinae and D. pteronyssinus are available at 5,000 AU/ml, 2,500 AU/ml and 1,500 AU/ml. Active allergens are described by common and scientific name on the stock concentrate container label. INGREDIENTS: Extract of Standardized Mites contain at least 99.0% adult mites and mite stages. This product may contain trace amounts of yeast and/or pork products; sodium chloride 0.95%; sodium bicarbonate 0.24%; 50% v/v glycerine as stabilizing agent and preservative. Following is a brief description of the standardized quality procedures applied to these extracts: 1. The source material is carefully selected from whole body adult mites and mite stages cultured from a medium containing no material of human origin. The source material is extracted with a saline buffer and 50% v/v glycerine. 2. Several manufacturers submitted intradermal skin test data on Biopol Laboratories mite medium extract using patients who were puncture test positive (erythema greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (erythema greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive to the mite extract and who were also skin test positive to the mite medium extract were also skin tested by the puncture method with an extract of yeast (Saccharomyces sp.) and were positive. 3. A ninhydrin protein analysis is completed to compare with the standard extract. 4. Each lot is standardized against the F.D.A. reference standard extract for total biologic activity by means of ELISA competition. 5. The standardized mite extract is analyzed for glycerine content to insure a minimum of 50% v/v glycerine for optimal stability during the entire dating period.</Description>
</NDC>
<NDC>
<NDCCode>51013-175-04</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (51013-175-04) / 12 CAPSULE, LIQUID FILLED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>51013-0175-04</NDC11Code>
<ProductNDC>51013-175</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Night Time Severe Cold And Flu Relief</ProprietaryName>
<NonProprietaryName>Acetaminophen, Phenylephrine Hydrochloride, Doxylamine Succinate, Dextromethorphan Hydrobromide</NonProprietaryName>
<DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160609</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M012</ApplicationNumber>
<LabelerName>PuraCap Pharmaceutical LLC</LabelerName>
<SubstanceName>ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE; DOXYLAMINE SUCCINATE; PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>325; 10; 6.25; 5</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha1-Agonists [MoA], Antihistamine [EPC], Histamine Receptor Antagonists [MoA], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA], alpha-1 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160609</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves common cold/flu symptoms: 1 nasal congestion, 2 sinus congestion & pressure, 3 cough due to minor throat & bronchial irritation, 4 cough to help you sleep, 5 minor aches & pains, 6 headache, 7 fever, 8 sore throat, 9 runny nose & sneezing, 10 reduces swelling of nasal passages, 11 temporarily restores freer breathing through the nose, 12 promotes nasal and/or sinus drainage.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>54305-175-09</NDCCode>
<PackageDescription>9 LOZENGE in 1 BAG (54305-175-09) </PackageDescription>
<NDC11Code>54305-0175-09</NDC11Code>
<ProductNDC>54305-175</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>The Original Natural Herb Cough Drops</ProprietaryName>
<NonProprietaryName>Menthol</NonProprietaryName>
<DosageFormName>LOZENGE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19420101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M012</ApplicationNumber>
<LabelerName>Ricola Ag</LabelerName>
<SubstanceName>MENTHOL</SubstanceName>
<StrengthNumber>4.8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-09-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>. temporarily relieves: 1 cough due to a cold or inhaled irritants, 2 occasional minor irritation and pain due to sore throat or sore mouth.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>55150-175-01</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (55150-175-01) / 1 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>55150-0175-01</NDC11Code>
<ProductNDC>55150-175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Granisetron Hydrochloride</ProprietaryName>
<NonProprietaryName>Granisetron Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20160706</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204238</ApplicationNumber>
<LabelerName>Eugia US LLC</LabelerName>
<SubstanceName>GRANISETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160706</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Granisetron hydrochloride injection, is a serotonin-3 (5-HT3) receptor antagonist indicated for.</IndicationAndUsage>
<Description>Granisetron hydrochloride injection, USP is a serotonin-3 (5-HT3) receptor antagonist. Chemically it is endo-N-(9-methyl-9-azabicyclo [3.3.1] non-3-yl)-1-methyl-1H-indazole-3-carboxamide hydrochloride with a molecular weight of 348.9 (312.4 free base). Its molecular formula is C18H24N4OHCl, while its chemical structure is. Granisetron hydrochloride USP is a white or almost white powder that is readily soluble in water and normal saline at 20°C. Granisetron hydrochloride injection, USP is a clear, colorless, sterile, nonpyrogenic, aqueous solution for intravenous administration. Granisetron hydrochloride injection, USP 1 mg/mL is available in 1 mL single-dose and 4 mL multiple-dose vials. Each mL contains 1.12 mg granisetron hydrochloride USP equivalent to granisetron 1 mg; sodium chloride, 9 mg; citric acid, 2 mg; methylparaben, 1.8 mg and propylparaben, 0.2 mg, as preservatives, water for injection, q.s., sodium hydroxide and hydrochloric acid, as pH adjusters. The solution's pH ranges from 4.0 to 6.0.</Description>
</NDC>
<NDC>
<NDCCode>58443-0175-3</NDCCode>
<PackageDescription>100 mL in 1 BOTTLE (58443-0175-3) </PackageDescription>
<NDC11Code>58443-0175-03</NDC11Code>
<ProductNDC>58443-0175</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Solscents</ProprietaryName>
<ProprietaryNameSuffix>Clear Face Flower Blast Broad Spectrum Spf 50</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate, Octisalate, And Zinc Oxide</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20150401</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Prime Enterprises, Inc.</LabelerName>
<SubstanceName>OCTINOXATE; OCTISALATE; ZINC OXIDE</SubstanceName>
<StrengthNumber>76.5; 51; 45.9</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Helps prevent sunburn. If used as directed with other sun protection measures (See Directions), decreases the risk of skin cancer and early skin aging caused by the sun. .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>59746-175-06</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (59746-175-06) </PackageDescription>
<NDC11Code>59746-0175-06</NDC11Code>
<ProductNDC>59746-175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisone</ProprietaryName>
<NonProprietaryName>Prednisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20010829</StartMarketingDate>
<EndMarketingDate>20260501</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040362</ApplicationNumber>
<LabelerName>Jubilant Cadista Pharmacuticals Inc.</LabelerName>
<SubstanceName>PREDNISONE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20010829</StartMarketingDatePackage>
<EndMarketingDatePackage>20260501</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Prednisone Tablets, USP are indicated in the following conditions. 1. Endocrine Disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance)Congenital adrenal hyperplasiaHypercalcemia associated with cancer Nonsuppurative thyroiditis. 2. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in:Psoriatic arthritisRheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy)Ankylosing spondylitisAcute and subacute bursitisAcute nonspecific tenosynovitisAcute gouty arthritisPost-traumatic osteoarthritisSynovitis of osteoarthritisEpicondylitis. 3. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of:Systemic lupus erythematosusSystemic dermatomyositis (polymyositis)Acute rheumatic carditis. 4. Dermatologic DiseasesPemphigusBullous dermatitis herpetiformisSevere erythema multiforme (Stevens-Johnson syndrome)Exfoliative dermatitisMycosis fungoidesSevere psoriasisSevere seborrheic dermatitis. 5. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment. Seasonal or perennial allergic rhinitisBronchial asthmaContact dermatitisAtopic dermatitis Serum sickness Drug hypersensitivity reactions. 6. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as. Allergic corneal marginal ulcersHerpes zoster ophthalmicusAnterior segment inflammationDiffuse posterior uveitis and choroiditisSympathetic ophthalmiaAllergic conjunctivitisKeratitisChorioretinitisOptic neuritisIritis and iridocyclitis. 7. Respiratory Diseases. Symptomatic sarcoidosisLoeffler’s syndrome not manageable by other meansBerylliosisFulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapyAspiration pneumonitis. 8. Hematologic Disorders. Idiopathic thrombocytopenic purpura in adultsSecondary thrombocytopenia in adultsAcquired (autoimmune) hemolytic anemiaErythroblastopenia (RBC anemia)Congenital (erythroid) hypoplastic anemia. 9. Neoplastic Diseases. For palliative management of. Leukemias and lymphomas in adultsAcute leukemia of childhood. 10. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 11. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in. Ulcerative colitisRegional enteritis. 12. Nervous System. Acute exacerbations of multiple sclerosis. 13. Miscellaneous. Tuberculous meningitis with subarachnoid block or, impending block when used concurrently with appropriate antituberculous chemotherapy Trichinosis with neurologic or myocardial involvement.</IndicationAndUsage>
<Description>Prednisone, USP is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Prednisone, USP is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, in chloroform, in dioxane, and in methanol. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione, 17,21-dihydroxy- and its molecular weight is 358.43 The structural formula is represented below. Prednisone Tablets, USP are available in 5 strengths: 2.5 mg, 5 mg, 10 mg, 20 mg, and 50 mg. In addition, each tablet contains the following inactive Ingredients: Lactose Monohydrate, Magnesium Stearate, Pregelatinized Starch, Sodium Lauryl Sulfate and Sodium Starch Glycolate. Also Prednisone Tablets USP, 20 mg contains FD & C yellow # 6, aluminum lake, HT 15-18%.</Description>
</NDC>
<NDC>
<NDCCode>59746-175-09</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (59746-175-09) </PackageDescription>
<NDC11Code>59746-0175-09</NDC11Code>
<ProductNDC>59746-175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisone</ProprietaryName>
<NonProprietaryName>Prednisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20010829</StartMarketingDate>
<EndMarketingDate>20260501</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040362</ApplicationNumber>
<LabelerName>Jubilant Cadista Pharmacuticals Inc.</LabelerName>
<SubstanceName>PREDNISONE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20010829</StartMarketingDatePackage>
<EndMarketingDatePackage>20260501</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Prednisone Tablets, USP are indicated in the following conditions. 1. Endocrine Disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance)Congenital adrenal hyperplasiaHypercalcemia associated with cancer Nonsuppurative thyroiditis. 2. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in:Psoriatic arthritisRheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy)Ankylosing spondylitisAcute and subacute bursitisAcute nonspecific tenosynovitisAcute gouty arthritisPost-traumatic osteoarthritisSynovitis of osteoarthritisEpicondylitis. 3. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of:Systemic lupus erythematosusSystemic dermatomyositis (polymyositis)Acute rheumatic carditis. 4. Dermatologic DiseasesPemphigusBullous dermatitis herpetiformisSevere erythema multiforme (Stevens-Johnson syndrome)Exfoliative dermatitisMycosis fungoidesSevere psoriasisSevere seborrheic dermatitis. 5. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment. Seasonal or perennial allergic rhinitisBronchial asthmaContact dermatitisAtopic dermatitis Serum sickness Drug hypersensitivity reactions. 6. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as. Allergic corneal marginal ulcersHerpes zoster ophthalmicusAnterior segment inflammationDiffuse posterior uveitis and choroiditisSympathetic ophthalmiaAllergic conjunctivitisKeratitisChorioretinitisOptic neuritisIritis and iridocyclitis. 7. Respiratory Diseases. Symptomatic sarcoidosisLoeffler’s syndrome not manageable by other meansBerylliosisFulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapyAspiration pneumonitis. 8. Hematologic Disorders. Idiopathic thrombocytopenic purpura in adultsSecondary thrombocytopenia in adultsAcquired (autoimmune) hemolytic anemiaErythroblastopenia (RBC anemia)Congenital (erythroid) hypoplastic anemia. 9. Neoplastic Diseases. For palliative management of. Leukemias and lymphomas in adultsAcute leukemia of childhood. 10. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 11. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in. Ulcerative colitisRegional enteritis. 12. Nervous System. Acute exacerbations of multiple sclerosis. 13. Miscellaneous. Tuberculous meningitis with subarachnoid block or, impending block when used concurrently with appropriate antituberculous chemotherapy Trichinosis with neurologic or myocardial involvement.</IndicationAndUsage>
<Description>Prednisone, USP is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Prednisone, USP is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, in chloroform, in dioxane, and in methanol. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione, 17,21-dihydroxy- and its molecular weight is 358.43 The structural formula is represented below. Prednisone Tablets, USP are available in 5 strengths: 2.5 mg, 5 mg, 10 mg, 20 mg, and 50 mg. In addition, each tablet contains the following inactive Ingredients: Lactose Monohydrate, Magnesium Stearate, Pregelatinized Starch, Sodium Lauryl Sulfate and Sodium Starch Glycolate. Also Prednisone Tablets USP, 20 mg contains FD & C yellow # 6, aluminum lake, HT 15-18%.</Description>
</NDC>
<NDC>
<NDCCode>59746-175-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (59746-175-10) </PackageDescription>
<NDC11Code>59746-0175-10</NDC11Code>
<ProductNDC>59746-175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisone</ProprietaryName>
<NonProprietaryName>Prednisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20010829</StartMarketingDate>
<EndMarketingDate>20260501</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040362</ApplicationNumber>
<LabelerName>Jubilant Cadista Pharmacuticals Inc.</LabelerName>
<SubstanceName>PREDNISONE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20010829</StartMarketingDatePackage>
<EndMarketingDatePackage>20260501</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Prednisone Tablets, USP are indicated in the following conditions. 1. Endocrine Disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance)Congenital adrenal hyperplasiaHypercalcemia associated with cancer Nonsuppurative thyroiditis. 2. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in:Psoriatic arthritisRheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy)Ankylosing spondylitisAcute and subacute bursitisAcute nonspecific tenosynovitisAcute gouty arthritisPost-traumatic osteoarthritisSynovitis of osteoarthritisEpicondylitis. 3. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of:Systemic lupus erythematosusSystemic dermatomyositis (polymyositis)Acute rheumatic carditis. 4. Dermatologic DiseasesPemphigusBullous dermatitis herpetiformisSevere erythema multiforme (Stevens-Johnson syndrome)Exfoliative dermatitisMycosis fungoidesSevere psoriasisSevere seborrheic dermatitis. 5. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment. Seasonal or perennial allergic rhinitisBronchial asthmaContact dermatitisAtopic dermatitis Serum sickness Drug hypersensitivity reactions. 6. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as. Allergic corneal marginal ulcersHerpes zoster ophthalmicusAnterior segment inflammationDiffuse posterior uveitis and choroiditisSympathetic ophthalmiaAllergic conjunctivitisKeratitisChorioretinitisOptic neuritisIritis and iridocyclitis. 7. Respiratory Diseases. Symptomatic sarcoidosisLoeffler’s syndrome not manageable by other meansBerylliosisFulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapyAspiration pneumonitis. 8. Hematologic Disorders. Idiopathic thrombocytopenic purpura in adultsSecondary thrombocytopenia in adultsAcquired (autoimmune) hemolytic anemiaErythroblastopenia (RBC anemia)Congenital (erythroid) hypoplastic anemia. 9. Neoplastic Diseases. For palliative management of. Leukemias and lymphomas in adultsAcute leukemia of childhood. 10. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 11. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in. Ulcerative colitisRegional enteritis. 12. Nervous System. Acute exacerbations of multiple sclerosis. 13. Miscellaneous. Tuberculous meningitis with subarachnoid block or, impending block when used concurrently with appropriate antituberculous chemotherapy Trichinosis with neurologic or myocardial involvement.</IndicationAndUsage>
<Description>Prednisone, USP is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Prednisone, USP is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, in chloroform, in dioxane, and in methanol. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione, 17,21-dihydroxy- and its molecular weight is 358.43 The structural formula is represented below. Prednisone Tablets, USP are available in 5 strengths: 2.5 mg, 5 mg, 10 mg, 20 mg, and 50 mg. In addition, each tablet contains the following inactive Ingredients: Lactose Monohydrate, Magnesium Stearate, Pregelatinized Starch, Sodium Lauryl Sulfate and Sodium Starch Glycolate. Also Prednisone Tablets USP, 20 mg contains FD & C yellow # 6, aluminum lake, HT 15-18%.</Description>
</NDC>
<NDC>
<NDCCode>61919-175-05</NDCCode>
<PackageDescription>5 mL in 1 BOTTLE, DROPPER (61919-175-05)</PackageDescription>
<NDC11Code>61919-0175-05</NDC11Code>
<ProductNDC>61919-175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ofloxacin</ProprietaryName>
<NonProprietaryName>Ofloxacin</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20140101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076407</ApplicationNumber>
<LabelerName>DIRECT RX</LabelerName>
<SubstanceName>OFLOXACIN</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Quinolone Antimicrobial [EPC],Quinolones [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Ofloxacin ophthalmic solution is indicated for the treatment of infections caused by susceptible strains of the following bacteria in the conditions listed below.</IndicationAndUsage>
<Description>Ofloxacin Ophthalmic Solution USP, 0.3% is a sterile ophthalmic solution. It is a fluorinated carboxyquinolone anti-infective for topical ophthalmic use. Chemical Name: (±)-9-Fluoro-2, 3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido [1,2,3-de]-1,4 benzoxazine-6-carboxylic acid. Contains: Active: ofloxacin 0.3% (3 mg/mL);. Preservative: benzalkonium chloride (0.005%);. Inactives: sodium chloride and water for injection. May also contain hydrochloric acid and/or sodium hydroxide to adjust pH. Ofloxacin Ophthalmic Solution USP, 0.3% is unbuffered and formulated with a pH of 6.4 (range - 6.0 to 6.8). It has an osmolality of 300 mOsm/kg. Ofloxacin is a fluorinated 4-quinolone which differs from other fluorinated 4-quinolones in that there is a six member (pyridobenzoxazine) ring from positions 1 to 8 of the basic ring structure.</Description>
</NDC>
</NDCList>