RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>71335-0177-9</NDCCode>
    <PackageDescription>10 TABLET in 1 BOTTLE (71335-0177-9) </PackageDescription>
    <NDC11Code>71335-0177-09</NDC11Code>
    <ProductNDC>71335-0177</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dexamethasone</ProprietaryName>
    <NonProprietaryName>Dexamethasone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19830428</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA088238</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>DEXAMETHASONE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2021-05-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101130</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>68151-0177-9</NDCCode>
    <PackageDescription>1 TABLET, FILM COATED in 1 PACKAGE (68151-0177-9)</PackageDescription>
    <NDC11Code>68151-0177-09</NDC11Code>
    <ProductNDC>68151-0177</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Simvastatin</ProprietaryName>
    <NonProprietaryName>Simvastatin</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20060627</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076052</ApplicationNumber>
    <LabelerName>Carilion Materials Management</LabelerName>
    <SubstanceName>SIMVASTATIN</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is indicated as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. In patients with coronary heart disease (CHD) or at high risk of CHD, simvastatin tablets USP can be started simultaneously with diet.</IndicationAndUsage>
    <Description>Simvastatin, USP is a lipid-lowering agent that is derived synthetically from a fermentation product of Aspergillus terreus. After oral ingestion, simvastatin, USP, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate-limiting step in the biosynthesis of cholesterol. Simvastatin, USP is butanoic acid, 2,2-dimethyl-,1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2H-pyran-2-yl)-ethyl]-1-naphthalenyl ester, [1S-[1α,3α,7β,8β(2S*,4S*),-8aβ]]. Its structural formula is:. C25H38O5 M.W. 418.57. Simvastatin, USP is a white to off-white, nonhygroscopic, crystalline powder that is practically insoluble in water, and freely soluble in chloroform, methanol and ethanol. Simvastatin tablets USP for oral administration contain either 5 mg, 10 mg, 20 mg, 40 mg or 80 mg of simvastatin, USP and the following inactive ingredients: ascorbic acid, butylated hydroxyanisole, citric acid monohydrate, hypromellose, iron oxide red, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized corn starch, titanium dioxide and triacetin. Additionally, the 5 mg, 10 mg, 20 mg, and 80 mg strengths contain: iron oxide yellow; and the 5 mg and 80 mg strengths contain: iron oxide black.</Description>
  </NDC>
  <NDC>
    <NDCCode>71335-0177-0</NDCCode>
    <PackageDescription>4 TABLET in 1 BOTTLE (71335-0177-0) </PackageDescription>
    <NDC11Code>71335-0177-00</NDC11Code>
    <ProductNDC>71335-0177</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dexamethasone</ProprietaryName>
    <NonProprietaryName>Dexamethasone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19830428</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA088238</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>DEXAMETHASONE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2021-05-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101130</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>71335-0177-1</NDCCode>
    <PackageDescription>30 TABLET in 1 BOTTLE (71335-0177-1) </PackageDescription>
    <NDC11Code>71335-0177-01</NDC11Code>
    <ProductNDC>71335-0177</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dexamethasone</ProprietaryName>
    <NonProprietaryName>Dexamethasone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19830428</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA088238</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>DEXAMETHASONE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2021-05-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101130</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>71335-0177-2</NDCCode>
    <PackageDescription>6 TABLET in 1 BOTTLE (71335-0177-2) </PackageDescription>
    <NDC11Code>71335-0177-02</NDC11Code>
    <ProductNDC>71335-0177</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dexamethasone</ProprietaryName>
    <NonProprietaryName>Dexamethasone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19830428</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA088238</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>DEXAMETHASONE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2021-05-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101130</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>71335-0177-3</NDCCode>
    <PackageDescription>3 TABLET in 1 BOTTLE (71335-0177-3) </PackageDescription>
    <NDC11Code>71335-0177-03</NDC11Code>
    <ProductNDC>71335-0177</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dexamethasone</ProprietaryName>
    <NonProprietaryName>Dexamethasone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19830428</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA088238</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>DEXAMETHASONE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2021-05-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101130</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>71335-0177-4</NDCCode>
    <PackageDescription>15 TABLET in 1 BOTTLE (71335-0177-4) </PackageDescription>
    <NDC11Code>71335-0177-04</NDC11Code>
    <ProductNDC>71335-0177</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dexamethasone</ProprietaryName>
    <NonProprietaryName>Dexamethasone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19830428</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA088238</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>DEXAMETHASONE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2021-05-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101130</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>71335-0177-5</NDCCode>
    <PackageDescription>40 TABLET in 1 BOTTLE (71335-0177-5) </PackageDescription>
    <NDC11Code>71335-0177-05</NDC11Code>
    <ProductNDC>71335-0177</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dexamethasone</ProprietaryName>
    <NonProprietaryName>Dexamethasone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19830428</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA088238</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>DEXAMETHASONE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2021-05-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101130</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>71335-0177-6</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (71335-0177-6) </PackageDescription>
    <NDC11Code>71335-0177-06</NDC11Code>
    <ProductNDC>71335-0177</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dexamethasone</ProprietaryName>
    <NonProprietaryName>Dexamethasone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19830428</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA088238</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>DEXAMETHASONE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2021-05-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101130</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>71335-0177-7</NDCCode>
    <PackageDescription>28 TABLET in 1 BOTTLE (71335-0177-7) </PackageDescription>
    <NDC11Code>71335-0177-07</NDC11Code>
    <ProductNDC>71335-0177</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dexamethasone</ProprietaryName>
    <NonProprietaryName>Dexamethasone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19830428</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA088238</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>DEXAMETHASONE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2021-05-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101130</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>71335-0177-8</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE (71335-0177-8) </PackageDescription>
    <NDC11Code>71335-0177-08</NDC11Code>
    <ProductNDC>71335-0177</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dexamethasone</ProprietaryName>
    <NonProprietaryName>Dexamethasone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19830428</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA088238</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>DEXAMETHASONE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2021-05-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101130</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>14141-177-01</NDCCode>
    <PackageDescription>9 g in 1 JAR (14141-177-01) </PackageDescription>
    <NDC11Code>14141-0177-01</NDC11Code>
    <ProductNDC>14141-177</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Clarite Makeup For A Cleaner Appearance Spf 30 200-c</ProprietaryName>
    <NonProprietaryName>Octinoxate, Zinc Oxide</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20200324</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
    <ApplicationNumber>part352</ApplicationNumber>
    <LabelerName>BEL STAR S A</LabelerName>
    <SubstanceName>OCTINOXATE; ZINC OXIDE</SubstanceName>
    <StrengthNumber>7.5; 7.84</StrengthNumber>
    <StrengthUnit>g/100g; g/100g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2020-12-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200324</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>27241-177-13</NDCCode>
    <PackageDescription>112 TABLET in 1 BOTTLE (27241-177-13) </PackageDescription>
    <NDC11Code>27241-0177-13</NDC11Code>
    <ProductNDC>27241-177</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tetrabenazine</ProprietaryName>
    <NonProprietaryName>Tetrabenazine</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20201227</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213621</ApplicationNumber>
    <LabelerName>Ajanta Pharma USA Inc.</LabelerName>
    <SubstanceName>TETRABENAZINE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Vesicular Monoamine Transporter 2 Inhibitor [EPC], Vesicular Monoamine Transporter 2 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-11-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201227</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tetrabenazine tablets are indicated for the treatment of chorea associated with Huntington’s disease.</IndicationAndUsage>
    <Description>Tetrabenazine is a monoamine depletor for oral administration. The molecular weight of tetrabenazine is 317.43; the pKa is 6.51. Tetrabenazine is a hexahydro-dimethoxy-benzoquinolizine derivative and has the following chemical name: cis rac –1,3,4,6,7,11bhexahydro-9,10-dimethoxy-3-(2-methylpropyl)-2H-benzo[a]quinolizin-2-one. The molecular formula C19H27NO3 is represented by the following structural formula. Tetrabenazine is off-white to pale yellow powder that is sparingly soluble in methanol and soluble in chloroform. Each tetrabenazine tablet contains either 12.5 or 25 mg of tetrabenazine as the active ingredient. Tetrabenazine tablets contain tetrabenazine as the active ingredient and the following inactive ingredients: lactose monohydrate, ferric oxide yellow, corn starch, pregelatinized starch, magnesium stearate and talc. The 12.5 mg tetrabenazine tablets are light yellow to yellow colored, round, flat faced beveled edge, non-scored tablets debossed with ‘T1’ on one side and plain on other side. The 25 mg tetrabenazine tablets are light yellow to yellow colored, round, flat faced beveled edge, functionally scored tablets debossed with ‘T’ on both side of scored line and plain on other side.</Description>
  </NDC>
  <NDC>
    <NDCCode>31645-177-02</NDCCode>
    <PackageDescription>1 CONTAINER in 1 CARTON (31645-177-02)  &gt; 9.5 g in 1 CONTAINER (31645-177-01) </PackageDescription>
    <NDC11Code>31645-0177-02</NDC11Code>
    <ProductNDC>31645-177</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Youthful Wear Spotless Powder</ProprietaryName>
    <ProprietaryNameSuffix>Spf 15</ProprietaryNameSuffix>
    <NonProprietaryName>Titanium Dioxide</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20131201</StartMarketingDate>
    <EndMarketingDate>20191231</EndMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
    <ApplicationNumber>part352</ApplicationNumber>
    <LabelerName>Physicians Formula Inc</LabelerName>
    <SubstanceName>TITANIUM DIOXIDE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>g/100g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2020-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20131201</StartMarketingDatePackage>
    <EndMarketingDatePackage>20191231</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>49288-0177-3</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0177-3)</PackageDescription>
    <NDC11Code>49288-0177-03</NDC11Code>
    <ProductNDC>49288-0177</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Standardized Mite, Dermatophagoides Farinae</ProprietaryName>
    <NonProprietaryName>Standardized Mite, Dermatophagoides Farinae</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19911022</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102224</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
    <StrengthNumber>5000</StrengthNumber>
    <StrengthUnit>[AU]/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS],Insect Proteins [CS],Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>INDICATIONS AND USAGE    Standardized Mite allergenic extract is indicated for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. An orderly approach to the diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.     Mite mixtures should not be used for diagnostic skin testing. The individual mites should be used. Mite mixtures may be used for immunotherapy to treat patients who demonstrated sensi­tivity to both D. farinae and D. pteronyssinus mites. Patients who react to both D. farinae and D. pteronyssinus have demonstrated a significant cross-reactivity. Caution should be used in esca­lating treatment with mite mixtures.21PRICK-PUNCTURE TESTING: A positive control using Histamine Phosphate is important to identify those patients whose skin may not be reactive due to medications, metabolic or other rea­sons. A diluent control, if negative, would exclude false-positive reactions due to ingredients in the diluent or patients who have dermatographism.     To identify highly sensitive individuals and as a safety precaution, it is recommended that prick-puncture test using a drop of the extract concentrate (10,000 AU/ml) be performed prior to initiating very dilute intradermal testing. Prick-puncture testing is performed by placing a drop of extract concentrate on the skin and puncturing the skin through the drop with a small needle such as a bifurcated vaccinating needle. The most satisfactory sites on the back for skin testing are from the posterior axillary fold to 2.5 cm from the spinal column, and from the top of the scapula to the lower rib margins. The best areas on the arms are the volar surfaces from the axilla to 2.5 or 5 cm above the wrist, skipping the anticubital space. Glycerinated Mite extracts containing 10,000 AU/ml are recommended for prick-puncture testing. Skin reactions are based on size of erythema and wheal. For interpretation of skin reactions, refer to chart below.      Smaller, less conclusive reactions may be considered positive in conjunction with a definitive history of symptoms on exposure to the mite allergen. The more sensitive the patient the higher the probability that he/she will have symptoms related to the exposure of the offending allergen. Hence, the importance of a good patient history. Less sensitive individuals can be tested intra­dermally with an appropriately diluted extract.     A clinical study using the same patients with positive prick-puncture test (10) using the ID50EAL Method, Intradermal Dilution for 50 mm Sum of Erythema D50 Determines the Allergy Unit, has demonstrated the following:     Skin test by prick-puncture test using Standardized D. farinae Mite, 10,000 AU/ml was per­formed in 10 patients. The mean sum of erythema diameter was 76.6 mm (Range 45-104 mm). Skin test by prick-puncture test using Standardized D. pteronyssinus Mite, 10,000 AU/ml in 10 patients, the mean sum of erythema diameter was 74.7 mm (Range 43-109 mm). *C = Concentration. SINGLE DILUTION INTRADERMAL TESTING: The surface of the upper and lower arm is the usual location for skin testing. It is important that a new, sterile, disposable syringe and needle be used for each extract tested. Intracutaneous test dilutions should be made with aqueous diluent. (1) Start testing with the most dilute allergenic extract concentration. (2) A volume of 0.02-0.05 ml should be injected slowly into the superficial skin layers making a small bleb (superficial wheal). (3) For patients without a history of extreme sensitivity, a prick-puncture test of less than 2+, the initial dilu­tion for skin testing should contain 0.02 to 0.06 AU/ml (see Table I). For very sensitive patients with a prick-puncture of greater than 2+, a further dilution should be made to 0.002 to 0.006 AU/ml (see Table I). If after 20 minutes no skin reaction is obtained, continue the testing using five-fold or ten-fold incre­ments in potency until a reaction of 1+ or until the concentration of 2,000 AU (five-fold) or 1,000 AU (ten-fold) has been tested with a glycerine control. Glycerine may be used at a dilution of 0.5% as long as 0.5% glycerine produces negative control. The diluent should be tested and included in the interpretation of the skin reactions.16 INTRADERMAL TESTING–SKIN ENDPOINT TITRATION: The allergenic extracts to which the patient is sensitive, the patient's degree of sensitivity and the dose of allergen to be used in immunotherapy can be determined through the use of intracutaneous skin tests involving pro­gressive five-fold dilutions of allergenic extracts, prepared and refrigerated at 2-8° C. The critical variable is the size if the wheal and erythema produced by the intracutaneous injection of 0.01 to 0.02 ml of the test allergen producing a 4 mm diameter superficial skin wheal. For patients demon­strating a prick-puncture skin test of less than 2+, an initial screening dilution of 0.02-0.06 AU/ml is safe (see Table I). For patients demonstrating a prick-puncture skin test greater than 2+, an initial screening dilu­tion of 0.002 to 0.006 AU/ml is safe. The skin endpoint is detected by noting the dilution that pro­duces a wheal 2 mm larger than non-reacting dilutions (5 mm negative wheal) until progressive whealing with each five-fold increase in test potency occurs, i.e., a 5 mm (negative), 7 mm, 9 mm, 11 mm is the normal sequence of whealing. The 7 mm wheal would be the endpoint. The endpoint dilution is used as an initial dose concentration for immunotherapy. An endpoint dose of 0.15 ml is a safe initial dose to be followed by escalation to the optimal maximum tolerated dose for each indi­vidual.     Using Standardized D. farinae Mite, 10,000 AU/ml on 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.4). Using Standardized D. pteronyssinus Mite 10,000 AU/ml in 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.7).</IndicationAndUsage>
    <Description>DESCRIPTION     The extract is sterile and intended for dilution prior to skin testing and/or immunotherapy. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. The route of administration for immunotherapy is subcutaneous. The designation AU/ml (Allergy Units per ml) is unitage based upon the relative potency of this standardized mite extract when com­pared by ELISA competition to the F.D.A. Mite Allergenic Reference Standard labeled 10,000 AU/ml assigned on the basis of quantitative skin testing by the ID50EAL Method.1,2,3,4,5,16 Lower con­centrations (e.g. 5,000 AU/ml and 3,000 AU/ml) are prepared by dilution of stock concentrates. Mite mixtures containing equal volumes of D. farinae and D. pteronyssinus are available at 5,000 AU/ml, 2,500 AU/ml and 1,500 AU/ml.     Active allergens are described by common and scientific name on the stock concentrate con­tainer label.     INGREDIENTS: Extract of Standardized Mites contain at least 99.0% adult mites and mite stages. This product may contain trace amounts of yeast and/or pork products; sodium chloride 0.95%; sodium bicarbonate 0.24%; 50% v/v glycerine as stabilizing agent and preservative.     Following is a brief description of the standardized quality procedures applied to these extracts:         1. The source material is carefully selected from whole body adult mites and mite stages cul­tured from a medium containing no material of human origin. The source material is extracted with a saline buffer and 50% v/v glycerine.         2. Several manufacturers submitted intradermal skin test data on Biopol Laboratories mite medium extract using patients who were puncture test positive (erythema greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (erythe­ma greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive to the mite extract and who were also skin test positive to the mite medium extract were also skin tested by the puncture method with an extract of yeast (Saccharomyces sp.) and were positive.         3. A ninhydrin protein analysis is completed to compare with the standard extract.         4. Each lot is standardized against the F.D.A. reference standard extract for total biologic activ­ity by means of ELISA competition.         5. The standardized mite extract is analyzed for glycerine content to insure a minimum of 50% v/v glycerine for optimal stability during the entire dating period.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0177-4</NDCCode>
    <PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49288-0177-4)</PackageDescription>
    <NDC11Code>49288-0177-04</NDC11Code>
    <ProductNDC>49288-0177</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Standardized Mite, Dermatophagoides Farinae</ProprietaryName>
    <NonProprietaryName>Standardized Mite, Dermatophagoides Farinae</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19911022</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102224</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
    <StrengthNumber>5000</StrengthNumber>
    <StrengthUnit>[AU]/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS],Insect Proteins [CS],Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>INDICATIONS AND USAGE    Standardized Mite allergenic extract is indicated for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. An orderly approach to the diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.     Mite mixtures should not be used for diagnostic skin testing. The individual mites should be used. Mite mixtures may be used for immunotherapy to treat patients who demonstrated sensi­tivity to both D. farinae and D. pteronyssinus mites. Patients who react to both D. farinae and D. pteronyssinus have demonstrated a significant cross-reactivity. Caution should be used in esca­lating treatment with mite mixtures.21PRICK-PUNCTURE TESTING: A positive control using Histamine Phosphate is important to identify those patients whose skin may not be reactive due to medications, metabolic or other rea­sons. A diluent control, if negative, would exclude false-positive reactions due to ingredients in the diluent or patients who have dermatographism.     To identify highly sensitive individuals and as a safety precaution, it is recommended that prick-puncture test using a drop of the extract concentrate (10,000 AU/ml) be performed prior to initiating very dilute intradermal testing. Prick-puncture testing is performed by placing a drop of extract concentrate on the skin and puncturing the skin through the drop with a small needle such as a bifurcated vaccinating needle. The most satisfactory sites on the back for skin testing are from the posterior axillary fold to 2.5 cm from the spinal column, and from the top of the scapula to the lower rib margins. The best areas on the arms are the volar surfaces from the axilla to 2.5 or 5 cm above the wrist, skipping the anticubital space. Glycerinated Mite extracts containing 10,000 AU/ml are recommended for prick-puncture testing. Skin reactions are based on size of erythema and wheal. For interpretation of skin reactions, refer to chart below.      Smaller, less conclusive reactions may be considered positive in conjunction with a definitive history of symptoms on exposure to the mite allergen. The more sensitive the patient the higher the probability that he/she will have symptoms related to the exposure of the offending allergen. Hence, the importance of a good patient history. Less sensitive individuals can be tested intra­dermally with an appropriately diluted extract.     A clinical study using the same patients with positive prick-puncture test (10) using the ID50EAL Method, Intradermal Dilution for 50 mm Sum of Erythema D50 Determines the Allergy Unit, has demonstrated the following:     Skin test by prick-puncture test using Standardized D. farinae Mite, 10,000 AU/ml was per­formed in 10 patients. The mean sum of erythema diameter was 76.6 mm (Range 45-104 mm). Skin test by prick-puncture test using Standardized D. pteronyssinus Mite, 10,000 AU/ml in 10 patients, the mean sum of erythema diameter was 74.7 mm (Range 43-109 mm). *C = Concentration. SINGLE DILUTION INTRADERMAL TESTING: The surface of the upper and lower arm is the usual location for skin testing. It is important that a new, sterile, disposable syringe and needle be used for each extract tested. Intracutaneous test dilutions should be made with aqueous diluent. (1) Start testing with the most dilute allergenic extract concentration. (2) A volume of 0.02-0.05 ml should be injected slowly into the superficial skin layers making a small bleb (superficial wheal). (3) For patients without a history of extreme sensitivity, a prick-puncture test of less than 2+, the initial dilu­tion for skin testing should contain 0.02 to 0.06 AU/ml (see Table I). For very sensitive patients with a prick-puncture of greater than 2+, a further dilution should be made to 0.002 to 0.006 AU/ml (see Table I). If after 20 minutes no skin reaction is obtained, continue the testing using five-fold or ten-fold incre­ments in potency until a reaction of 1+ or until the concentration of 2,000 AU (five-fold) or 1,000 AU (ten-fold) has been tested with a glycerine control. Glycerine may be used at a dilution of 0.5% as long as 0.5% glycerine produces negative control. The diluent should be tested and included in the interpretation of the skin reactions.16 INTRADERMAL TESTING–SKIN ENDPOINT TITRATION: The allergenic extracts to which the patient is sensitive, the patient's degree of sensitivity and the dose of allergen to be used in immunotherapy can be determined through the use of intracutaneous skin tests involving pro­gressive five-fold dilutions of allergenic extracts, prepared and refrigerated at 2-8° C. The critical variable is the size if the wheal and erythema produced by the intracutaneous injection of 0.01 to 0.02 ml of the test allergen producing a 4 mm diameter superficial skin wheal. For patients demon­strating a prick-puncture skin test of less than 2+, an initial screening dilution of 0.02-0.06 AU/ml is safe (see Table I). For patients demonstrating a prick-puncture skin test greater than 2+, an initial screening dilu­tion of 0.002 to 0.006 AU/ml is safe. The skin endpoint is detected by noting the dilution that pro­duces a wheal 2 mm larger than non-reacting dilutions (5 mm negative wheal) until progressive whealing with each five-fold increase in test potency occurs, i.e., a 5 mm (negative), 7 mm, 9 mm, 11 mm is the normal sequence of whealing. The 7 mm wheal would be the endpoint. The endpoint dilution is used as an initial dose concentration for immunotherapy. An endpoint dose of 0.15 ml is a safe initial dose to be followed by escalation to the optimal maximum tolerated dose for each indi­vidual.     Using Standardized D. farinae Mite, 10,000 AU/ml on 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.4). Using Standardized D. pteronyssinus Mite 10,000 AU/ml in 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.7).</IndicationAndUsage>
    <Description>DESCRIPTION     The extract is sterile and intended for dilution prior to skin testing and/or immunotherapy. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. The route of administration for immunotherapy is subcutaneous. The designation AU/ml (Allergy Units per ml) is unitage based upon the relative potency of this standardized mite extract when com­pared by ELISA competition to the F.D.A. Mite Allergenic Reference Standard labeled 10,000 AU/ml assigned on the basis of quantitative skin testing by the ID50EAL Method.1,2,3,4,5,16 Lower con­centrations (e.g. 5,000 AU/ml and 3,000 AU/ml) are prepared by dilution of stock concentrates. Mite mixtures containing equal volumes of D. farinae and D. pteronyssinus are available at 5,000 AU/ml, 2,500 AU/ml and 1,500 AU/ml.     Active allergens are described by common and scientific name on the stock concentrate con­tainer label.     INGREDIENTS: Extract of Standardized Mites contain at least 99.0% adult mites and mite stages. This product may contain trace amounts of yeast and/or pork products; sodium chloride 0.95%; sodium bicarbonate 0.24%; 50% v/v glycerine as stabilizing agent and preservative.     Following is a brief description of the standardized quality procedures applied to these extracts:         1. The source material is carefully selected from whole body adult mites and mite stages cul­tured from a medium containing no material of human origin. The source material is extracted with a saline buffer and 50% v/v glycerine.         2. Several manufacturers submitted intradermal skin test data on Biopol Laboratories mite medium extract using patients who were puncture test positive (erythema greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (erythe­ma greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive to the mite extract and who were also skin test positive to the mite medium extract were also skin tested by the puncture method with an extract of yeast (Saccharomyces sp.) and were positive.         3. A ninhydrin protein analysis is completed to compare with the standard extract.         4. Each lot is standardized against the F.D.A. reference standard extract for total biologic activ­ity by means of ELISA competition.         5. The standardized mite extract is analyzed for glycerine content to insure a minimum of 50% v/v glycerine for optimal stability during the entire dating period.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0177-5</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49288-0177-5)</PackageDescription>
    <NDC11Code>49288-0177-05</NDC11Code>
    <ProductNDC>49288-0177</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Standardized Mite, Dermatophagoides Farinae</ProprietaryName>
    <NonProprietaryName>Standardized Mite, Dermatophagoides Farinae</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19911022</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102224</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
    <StrengthNumber>5000</StrengthNumber>
    <StrengthUnit>[AU]/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS],Insect Proteins [CS],Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>INDICATIONS AND USAGE    Standardized Mite allergenic extract is indicated for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. An orderly approach to the diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.     Mite mixtures should not be used for diagnostic skin testing. The individual mites should be used. Mite mixtures may be used for immunotherapy to treat patients who demonstrated sensi­tivity to both D. farinae and D. pteronyssinus mites. Patients who react to both D. farinae and D. pteronyssinus have demonstrated a significant cross-reactivity. Caution should be used in esca­lating treatment with mite mixtures.21PRICK-PUNCTURE TESTING: A positive control using Histamine Phosphate is important to identify those patients whose skin may not be reactive due to medications, metabolic or other rea­sons. A diluent control, if negative, would exclude false-positive reactions due to ingredients in the diluent or patients who have dermatographism.     To identify highly sensitive individuals and as a safety precaution, it is recommended that prick-puncture test using a drop of the extract concentrate (10,000 AU/ml) be performed prior to initiating very dilute intradermal testing. Prick-puncture testing is performed by placing a drop of extract concentrate on the skin and puncturing the skin through the drop with a small needle such as a bifurcated vaccinating needle. The most satisfactory sites on the back for skin testing are from the posterior axillary fold to 2.5 cm from the spinal column, and from the top of the scapula to the lower rib margins. The best areas on the arms are the volar surfaces from the axilla to 2.5 or 5 cm above the wrist, skipping the anticubital space. Glycerinated Mite extracts containing 10,000 AU/ml are recommended for prick-puncture testing. Skin reactions are based on size of erythema and wheal. For interpretation of skin reactions, refer to chart below.      Smaller, less conclusive reactions may be considered positive in conjunction with a definitive history of symptoms on exposure to the mite allergen. The more sensitive the patient the higher the probability that he/she will have symptoms related to the exposure of the offending allergen. Hence, the importance of a good patient history. Less sensitive individuals can be tested intra­dermally with an appropriately diluted extract.     A clinical study using the same patients with positive prick-puncture test (10) using the ID50EAL Method, Intradermal Dilution for 50 mm Sum of Erythema D50 Determines the Allergy Unit, has demonstrated the following:     Skin test by prick-puncture test using Standardized D. farinae Mite, 10,000 AU/ml was per­formed in 10 patients. The mean sum of erythema diameter was 76.6 mm (Range 45-104 mm). Skin test by prick-puncture test using Standardized D. pteronyssinus Mite, 10,000 AU/ml in 10 patients, the mean sum of erythema diameter was 74.7 mm (Range 43-109 mm). *C = Concentration. SINGLE DILUTION INTRADERMAL TESTING: The surface of the upper and lower arm is the usual location for skin testing. It is important that a new, sterile, disposable syringe and needle be used for each extract tested. Intracutaneous test dilutions should be made with aqueous diluent. (1) Start testing with the most dilute allergenic extract concentration. (2) A volume of 0.02-0.05 ml should be injected slowly into the superficial skin layers making a small bleb (superficial wheal). (3) For patients without a history of extreme sensitivity, a prick-puncture test of less than 2+, the initial dilu­tion for skin testing should contain 0.02 to 0.06 AU/ml (see Table I). For very sensitive patients with a prick-puncture of greater than 2+, a further dilution should be made to 0.002 to 0.006 AU/ml (see Table I). If after 20 minutes no skin reaction is obtained, continue the testing using five-fold or ten-fold incre­ments in potency until a reaction of 1+ or until the concentration of 2,000 AU (five-fold) or 1,000 AU (ten-fold) has been tested with a glycerine control. Glycerine may be used at a dilution of 0.5% as long as 0.5% glycerine produces negative control. The diluent should be tested and included in the interpretation of the skin reactions.16 INTRADERMAL TESTING–SKIN ENDPOINT TITRATION: The allergenic extracts to which the patient is sensitive, the patient's degree of sensitivity and the dose of allergen to be used in immunotherapy can be determined through the use of intracutaneous skin tests involving pro­gressive five-fold dilutions of allergenic extracts, prepared and refrigerated at 2-8° C. The critical variable is the size if the wheal and erythema produced by the intracutaneous injection of 0.01 to 0.02 ml of the test allergen producing a 4 mm diameter superficial skin wheal. For patients demon­strating a prick-puncture skin test of less than 2+, an initial screening dilution of 0.02-0.06 AU/ml is safe (see Table I). For patients demonstrating a prick-puncture skin test greater than 2+, an initial screening dilu­tion of 0.002 to 0.006 AU/ml is safe. The skin endpoint is detected by noting the dilution that pro­duces a wheal 2 mm larger than non-reacting dilutions (5 mm negative wheal) until progressive whealing with each five-fold increase in test potency occurs, i.e., a 5 mm (negative), 7 mm, 9 mm, 11 mm is the normal sequence of whealing. The 7 mm wheal would be the endpoint. The endpoint dilution is used as an initial dose concentration for immunotherapy. An endpoint dose of 0.15 ml is a safe initial dose to be followed by escalation to the optimal maximum tolerated dose for each indi­vidual.     Using Standardized D. farinae Mite, 10,000 AU/ml on 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.4). Using Standardized D. pteronyssinus Mite 10,000 AU/ml in 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.7).</IndicationAndUsage>
    <Description>DESCRIPTION     The extract is sterile and intended for dilution prior to skin testing and/or immunotherapy. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. The route of administration for immunotherapy is subcutaneous. The designation AU/ml (Allergy Units per ml) is unitage based upon the relative potency of this standardized mite extract when com­pared by ELISA competition to the F.D.A. Mite Allergenic Reference Standard labeled 10,000 AU/ml assigned on the basis of quantitative skin testing by the ID50EAL Method.1,2,3,4,5,16 Lower con­centrations (e.g. 5,000 AU/ml and 3,000 AU/ml) are prepared by dilution of stock concentrates. Mite mixtures containing equal volumes of D. farinae and D. pteronyssinus are available at 5,000 AU/ml, 2,500 AU/ml and 1,500 AU/ml.     Active allergens are described by common and scientific name on the stock concentrate con­tainer label.     INGREDIENTS: Extract of Standardized Mites contain at least 99.0% adult mites and mite stages. This product may contain trace amounts of yeast and/or pork products; sodium chloride 0.95%; sodium bicarbonate 0.24%; 50% v/v glycerine as stabilizing agent and preservative.     Following is a brief description of the standardized quality procedures applied to these extracts:         1. The source material is carefully selected from whole body adult mites and mite stages cul­tured from a medium containing no material of human origin. The source material is extracted with a saline buffer and 50% v/v glycerine.         2. Several manufacturers submitted intradermal skin test data on Biopol Laboratories mite medium extract using patients who were puncture test positive (erythema greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (erythe­ma greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive to the mite extract and who were also skin test positive to the mite medium extract were also skin tested by the puncture method with an extract of yeast (Saccharomyces sp.) and were positive.         3. A ninhydrin protein analysis is completed to compare with the standard extract.         4. Each lot is standardized against the F.D.A. reference standard extract for total biologic activ­ity by means of ELISA competition.         5. The standardized mite extract is analyzed for glycerine content to insure a minimum of 50% v/v glycerine for optimal stability during the entire dating period.</Description>
  </NDC>
  <NDC>
    <NDCCode>59746-177-06</NDCCode>
    <PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (59746-177-06) </PackageDescription>
    <NDC11Code>59746-0177-06</NDC11Code>
    <ProductNDC>59746-177</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20060404</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077563</ApplicationNumber>
    <LabelerName>Jubilant Cadista Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-02-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20060404</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets should be used only for short periods (up to 2 or 3 weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
    <Description>Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt with the empirical formula C20H21NHCl and a molecular weight of 311.9. It has a melting point of 217º C, and a pKa of 8.47 at 25º C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine Hydrochloride is designated chemically as 3-(5H-dibenzo [a,d] cyclohepten-5-ylidene)-N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula:                                            Cyclobenzaprine hydrochloride tablets USP, for oral administration, are available in the following strengths: 5 mg, 7.5 mg and 10 mg. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, lactose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, talc, titanium dioxide. In addition, the 5 mg tablet contain FD&amp;C yellow # 6, and both the 5 mg and 10 mg tablets contain iron oxide yellow.</Description>
  </NDC>
  <NDC>
    <NDCCode>59746-177-10</NDCCode>
    <PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (59746-177-10) </PackageDescription>
    <NDC11Code>59746-0177-10</NDC11Code>
    <ProductNDC>59746-177</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20060404</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077563</ApplicationNumber>
    <LabelerName>Jubilant Cadista Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-02-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20060404</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets should be used only for short periods (up to 2 or 3 weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
    <Description>Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt with the empirical formula C20H21NHCl and a molecular weight of 311.9. It has a melting point of 217º C, and a pKa of 8.47 at 25º C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine Hydrochloride is designated chemically as 3-(5H-dibenzo [a,d] cyclohepten-5-ylidene)-N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula:                                            Cyclobenzaprine hydrochloride tablets USP, for oral administration, are available in the following strengths: 5 mg, 7.5 mg and 10 mg. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, lactose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, talc, titanium dioxide. In addition, the 5 mg tablet contain FD&amp;C yellow # 6, and both the 5 mg and 10 mg tablets contain iron oxide yellow.</Description>
  </NDC>
  <NDC>
    <NDCCode>64578-0177-1</NDCCode>
    <PackageDescription>59.1 mL in 1 BOTTLE (64578-0177-1) </PackageDescription>
    <NDC11Code>64578-0177-01</NDC11Code>
    <ProductNDC>64578-0177</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Rehydration</ProprietaryName>
    <NonProprietaryName>Adenosinum Cyclophosphoricum, Coffea Cruda, Glandula Suprarenalis Suis, Hypothalamus, Kali Phos, Nat Mur, Sarsaparilla, Silicea, Taraxacum, Thyroidinum</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230412</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
    <LabelerName>Energetix Corporation</LabelerName>
    <SubstanceName>ADENOSINE CYCLIC PHOSPHATE; ARABICA COFFEE BEAN; SUS SCROFA ADRENAL GLAND; BOS TAURUS HYPOTHALAMUS; DIBASIC POTASSIUM PHOSPHATE; SODIUM CHLORIDE; SILICON DIOXIDE; SMILAX ORNATA ROOT; TARAXACUM OFFICINALE; THYROID, UNSPECIFIED</SubstanceName>
    <StrengthNumber>12; 9; 9; 12; 6; 8; 12; 4; 4; 12</StrengthNumber>
    <StrengthUnit>[hp_X]/59.1mL; [hp_X]/59.1mL; [hp_X]/59.1mL; [hp_X]/59.1mL; [hp_X]/59.1mL; [hp_X]/59.1mL; [hp_X]/59.1mL; [hp_X]/59.1mL; [hp_X]/59.1mL; [hp_X]/59.1mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Dietary Proteins [CS], Increased Histamine Release [PE], Non-Standardized Food Allergenic Extract [EPC], Non-Standardized Plant Allergenic Extract [EPC], Plant Proteins [CS], Seed Storage Proteins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-07-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230412</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Uses. Temporary relief of increased or decreased thirst, dryness, headaches.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>67877-177-01</NDCCode>
    <PackageDescription>100 TABLET in 1 BOTTLE (67877-177-01) </PackageDescription>
    <NDC11Code>67877-0177-01</NDC11Code>
    <ProductNDC>67877-177</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Olanzapine</ProprietaryName>
    <NonProprietaryName>Olanzapine</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20120101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202295</ApplicationNumber>
    <LabelerName>Ascend Laboratories, LLC</LabelerName>
    <SubstanceName>OLANZAPINE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Olanzapine is an atypical antipsychotic indicated. As oral formulation for the: 1 Treatment of schizophrenia. (1.1), 2 Adults: Efficacy was established in three clinical trials in patients with schizophrenia: two 6-week trials and one maintenance trial. (14.1), 3 Adolescents (ages 13 to 17): Efficacy was established in one 6-week trial in patients with schizophrenia (14.1). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.1), 4 Acute treatment of manic or mixed episodes associated with bipolar I disorder and maintenance treatment of bipolar I disorder. (1.2), 5 Adults: Efficacy was established in three clinical trials in patients with manic or mixed episodes of bipolar I disorder: two 3-to 4-week trials and one maintenance trial. (14.2), 6 Adolescents (ages 13 to 17): Efficacy was established in one 3-week trial in patients with manic or mixed episodes associated with bipolar I disorder (14.2). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.2), 7 Medication therapy for pediatric patients with schizophrenia or bipolar I disorder should be undertaken only after a thorough diagnostic evaluation and with careful consideration of the potential risks. (1.3), 8 Adjunct to valproate or lithium in the treatment of manic or mixed episodes associated with bipolar I disorder. (1.2), 9 Efficacy was established in two 6-week clinical trials in adults (14.2). Maintenance efficacy has not been systematically evaluated.As Olanzapine and Fluoxetine in Combination for the:, 10 Treatment of depressive episodes associated with bipolar I disorder. (1.5), 11 Efficacy was established with Symbyax (olanzapine and fluoxetine in combination); refer to the product label for Symbyax., 12 Treatment of treatment resistant depression. (1.6), 13 Efficacy was established with Symbyax (olanzapine and fluoxetine in combination) in adults; refer to the product label for Symbyax.</IndicationAndUsage>
    <Description>Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is. Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water.       Olanzapine tablets, USP are intended for oral administration only. Each tablet contains olanzapine, USP equivalent to 2.5 mg (8 μmol), 5 mg (16 μmol), 7.5 mg (24 μmol), 10 mg (32 μmol), 15 mg (48 μmol), or 20 mg (64 μmol). Inactive ingredients are lactose monohydrate, hydroxypropyl cellulose, mannitol, and magnesium stearate. The color coating contains pectin, triacetin, titanium dioxide, talc, and FD&amp;C Blue No. 2 Aluminum Lake (15 mg strength) or Iron Oxide Red (20 mg strength). Olanzapine tablets, USP of all strengths are imprinted with edible ink which contains shellac, Iron Oxide Black, N-Butyl Alcohol, Propylene Glycol, Ammonium Hydroxide.  FDA approved dissolution test specifications differ from USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>67877-177-10</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE (67877-177-10) </PackageDescription>
    <NDC11Code>67877-0177-10</NDC11Code>
    <ProductNDC>67877-177</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Olanzapine</ProprietaryName>
    <NonProprietaryName>Olanzapine</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20120101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202295</ApplicationNumber>
    <LabelerName>Ascend Laboratories, LLC</LabelerName>
    <SubstanceName>OLANZAPINE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Olanzapine is an atypical antipsychotic indicated. As oral formulation for the: 1 Treatment of schizophrenia. (1.1), 2 Adults: Efficacy was established in three clinical trials in patients with schizophrenia: two 6-week trials and one maintenance trial. (14.1), 3 Adolescents (ages 13 to 17): Efficacy was established in one 6-week trial in patients with schizophrenia (14.1). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.1), 4 Acute treatment of manic or mixed episodes associated with bipolar I disorder and maintenance treatment of bipolar I disorder. (1.2), 5 Adults: Efficacy was established in three clinical trials in patients with manic or mixed episodes of bipolar I disorder: two 3-to 4-week trials and one maintenance trial. (14.2), 6 Adolescents (ages 13 to 17): Efficacy was established in one 3-week trial in patients with manic or mixed episodes associated with bipolar I disorder (14.2). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.2), 7 Medication therapy for pediatric patients with schizophrenia or bipolar I disorder should be undertaken only after a thorough diagnostic evaluation and with careful consideration of the potential risks. (1.3), 8 Adjunct to valproate or lithium in the treatment of manic or mixed episodes associated with bipolar I disorder. (1.2), 9 Efficacy was established in two 6-week clinical trials in adults (14.2). Maintenance efficacy has not been systematically evaluated.As Olanzapine and Fluoxetine in Combination for the:, 10 Treatment of depressive episodes associated with bipolar I disorder. (1.5), 11 Efficacy was established with Symbyax (olanzapine and fluoxetine in combination); refer to the product label for Symbyax., 12 Treatment of treatment resistant depression. (1.6), 13 Efficacy was established with Symbyax (olanzapine and fluoxetine in combination) in adults; refer to the product label for Symbyax.</IndicationAndUsage>
    <Description>Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is. Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water.       Olanzapine tablets, USP are intended for oral administration only. Each tablet contains olanzapine, USP equivalent to 2.5 mg (8 μmol), 5 mg (16 μmol), 7.5 mg (24 μmol), 10 mg (32 μmol), 15 mg (48 μmol), or 20 mg (64 μmol). Inactive ingredients are lactose monohydrate, hydroxypropyl cellulose, mannitol, and magnesium stearate. The color coating contains pectin, triacetin, titanium dioxide, talc, and FD&amp;C Blue No. 2 Aluminum Lake (15 mg strength) or Iron Oxide Red (20 mg strength). Olanzapine tablets, USP of all strengths are imprinted with edible ink which contains shellac, Iron Oxide Black, N-Butyl Alcohol, Propylene Glycol, Ammonium Hydroxide.  FDA approved dissolution test specifications differ from USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>67877-177-30</NDCCode>
    <PackageDescription>30 TABLET in 1 BOTTLE (67877-177-30) </PackageDescription>
    <NDC11Code>67877-0177-30</NDC11Code>
    <ProductNDC>67877-177</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Olanzapine</ProprietaryName>
    <NonProprietaryName>Olanzapine</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20120101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202295</ApplicationNumber>
    <LabelerName>Ascend Laboratories, LLC</LabelerName>
    <SubstanceName>OLANZAPINE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Olanzapine is an atypical antipsychotic indicated. As oral formulation for the: 1 Treatment of schizophrenia. (1.1), 2 Adults: Efficacy was established in three clinical trials in patients with schizophrenia: two 6-week trials and one maintenance trial. (14.1), 3 Adolescents (ages 13 to 17): Efficacy was established in one 6-week trial in patients with schizophrenia (14.1). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.1), 4 Acute treatment of manic or mixed episodes associated with bipolar I disorder and maintenance treatment of bipolar I disorder. (1.2), 5 Adults: Efficacy was established in three clinical trials in patients with manic or mixed episodes of bipolar I disorder: two 3-to 4-week trials and one maintenance trial. (14.2), 6 Adolescents (ages 13 to 17): Efficacy was established in one 3-week trial in patients with manic or mixed episodes associated with bipolar I disorder (14.2). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.2), 7 Medication therapy for pediatric patients with schizophrenia or bipolar I disorder should be undertaken only after a thorough diagnostic evaluation and with careful consideration of the potential risks. (1.3), 8 Adjunct to valproate or lithium in the treatment of manic or mixed episodes associated with bipolar I disorder. (1.2), 9 Efficacy was established in two 6-week clinical trials in adults (14.2). Maintenance efficacy has not been systematically evaluated.As Olanzapine and Fluoxetine in Combination for the:, 10 Treatment of depressive episodes associated with bipolar I disorder. (1.5), 11 Efficacy was established with Symbyax (olanzapine and fluoxetine in combination); refer to the product label for Symbyax., 12 Treatment of treatment resistant depression. (1.6), 13 Efficacy was established with Symbyax (olanzapine and fluoxetine in combination) in adults; refer to the product label for Symbyax.</IndicationAndUsage>
    <Description>Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is. Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water.       Olanzapine tablets, USP are intended for oral administration only. Each tablet contains olanzapine, USP equivalent to 2.5 mg (8 μmol), 5 mg (16 μmol), 7.5 mg (24 μmol), 10 mg (32 μmol), 15 mg (48 μmol), or 20 mg (64 μmol). Inactive ingredients are lactose monohydrate, hydroxypropyl cellulose, mannitol, and magnesium stearate. The color coating contains pectin, triacetin, titanium dioxide, talc, and FD&amp;C Blue No. 2 Aluminum Lake (15 mg strength) or Iron Oxide Red (20 mg strength). Olanzapine tablets, USP of all strengths are imprinted with edible ink which contains shellac, Iron Oxide Black, N-Butyl Alcohol, Propylene Glycol, Ammonium Hydroxide.  FDA approved dissolution test specifications differ from USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>67877-177-35</NDCCode>
    <PackageDescription>10 BLISTER PACK in 1 CARTON (67877-177-35)  / 10 TABLET in 1 BLISTER PACK (67877-177-33) </PackageDescription>
    <NDC11Code>67877-0177-35</NDC11Code>
    <ProductNDC>67877-177</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Olanzapine</ProprietaryName>
    <NonProprietaryName>Olanzapine</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20120101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202295</ApplicationNumber>
    <LabelerName>Ascend Laboratories, LLC</LabelerName>
    <SubstanceName>OLANZAPINE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Olanzapine is an atypical antipsychotic indicated. As oral formulation for the: 1 Treatment of schizophrenia. (1.1), 2 Adults: Efficacy was established in three clinical trials in patients with schizophrenia: two 6-week trials and one maintenance trial. (14.1), 3 Adolescents (ages 13 to 17): Efficacy was established in one 6-week trial in patients with schizophrenia (14.1). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.1), 4 Acute treatment of manic or mixed episodes associated with bipolar I disorder and maintenance treatment of bipolar I disorder. (1.2), 5 Adults: Efficacy was established in three clinical trials in patients with manic or mixed episodes of bipolar I disorder: two 3-to 4-week trials and one maintenance trial. (14.2), 6 Adolescents (ages 13 to 17): Efficacy was established in one 3-week trial in patients with manic or mixed episodes associated with bipolar I disorder (14.2). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.2), 7 Medication therapy for pediatric patients with schizophrenia or bipolar I disorder should be undertaken only after a thorough diagnostic evaluation and with careful consideration of the potential risks. (1.3), 8 Adjunct to valproate or lithium in the treatment of manic or mixed episodes associated with bipolar I disorder. (1.2), 9 Efficacy was established in two 6-week clinical trials in adults (14.2). Maintenance efficacy has not been systematically evaluated.As Olanzapine and Fluoxetine in Combination for the:, 10 Treatment of depressive episodes associated with bipolar I disorder. (1.5), 11 Efficacy was established with Symbyax (olanzapine and fluoxetine in combination); refer to the product label for Symbyax., 12 Treatment of treatment resistant depression. (1.6), 13 Efficacy was established with Symbyax (olanzapine and fluoxetine in combination) in adults; refer to the product label for Symbyax.</IndicationAndUsage>
    <Description>Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is. Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water.       Olanzapine tablets, USP are intended for oral administration only. Each tablet contains olanzapine, USP equivalent to 2.5 mg (8 μmol), 5 mg (16 μmol), 7.5 mg (24 μmol), 10 mg (32 μmol), 15 mg (48 μmol), or 20 mg (64 μmol). Inactive ingredients are lactose monohydrate, hydroxypropyl cellulose, mannitol, and magnesium stearate. The color coating contains pectin, triacetin, titanium dioxide, talc, and FD&amp;C Blue No. 2 Aluminum Lake (15 mg strength) or Iron Oxide Red (20 mg strength). Olanzapine tablets, USP of all strengths are imprinted with edible ink which contains shellac, Iron Oxide Black, N-Butyl Alcohol, Propylene Glycol, Ammonium Hydroxide.  FDA approved dissolution test specifications differ from USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>67877-177-37</NDCCode>
    <PackageDescription>7 TABLET in 1 BOTTLE (67877-177-37) </PackageDescription>
    <NDC11Code>67877-0177-37</NDC11Code>
    <ProductNDC>67877-177</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Olanzapine</ProprietaryName>
    <NonProprietaryName>Olanzapine</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20120101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202295</ApplicationNumber>
    <LabelerName>Ascend Laboratories, LLC</LabelerName>
    <SubstanceName>OLANZAPINE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Olanzapine is an atypical antipsychotic indicated. As oral formulation for the: 1 Treatment of schizophrenia. (1.1), 2 Adults: Efficacy was established in three clinical trials in patients with schizophrenia: two 6-week trials and one maintenance trial. (14.1), 3 Adolescents (ages 13 to 17): Efficacy was established in one 6-week trial in patients with schizophrenia (14.1). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.1), 4 Acute treatment of manic or mixed episodes associated with bipolar I disorder and maintenance treatment of bipolar I disorder. (1.2), 5 Adults: Efficacy was established in three clinical trials in patients with manic or mixed episodes of bipolar I disorder: two 3-to 4-week trials and one maintenance trial. (14.2), 6 Adolescents (ages 13 to 17): Efficacy was established in one 3-week trial in patients with manic or mixed episodes associated with bipolar I disorder (14.2). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.2), 7 Medication therapy for pediatric patients with schizophrenia or bipolar I disorder should be undertaken only after a thorough diagnostic evaluation and with careful consideration of the potential risks. (1.3), 8 Adjunct to valproate or lithium in the treatment of manic or mixed episodes associated with bipolar I disorder. (1.2), 9 Efficacy was established in two 6-week clinical trials in adults (14.2). Maintenance efficacy has not been systematically evaluated.As Olanzapine and Fluoxetine in Combination for the:, 10 Treatment of depressive episodes associated with bipolar I disorder. (1.5), 11 Efficacy was established with Symbyax (olanzapine and fluoxetine in combination); refer to the product label for Symbyax., 12 Treatment of treatment resistant depression. (1.6), 13 Efficacy was established with Symbyax (olanzapine and fluoxetine in combination) in adults; refer to the product label for Symbyax.</IndicationAndUsage>
    <Description>Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is. Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water.       Olanzapine tablets, USP are intended for oral administration only. Each tablet contains olanzapine, USP equivalent to 2.5 mg (8 μmol), 5 mg (16 μmol), 7.5 mg (24 μmol), 10 mg (32 μmol), 15 mg (48 μmol), or 20 mg (64 μmol). Inactive ingredients are lactose monohydrate, hydroxypropyl cellulose, mannitol, and magnesium stearate. The color coating contains pectin, triacetin, titanium dioxide, talc, and FD&amp;C Blue No. 2 Aluminum Lake (15 mg strength) or Iron Oxide Red (20 mg strength). Olanzapine tablets, USP of all strengths are imprinted with edible ink which contains shellac, Iron Oxide Black, N-Butyl Alcohol, Propylene Glycol, Ammonium Hydroxide.  FDA approved dissolution test specifications differ from USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>67877-177-85</NDCCode>
    <PackageDescription>3 BLISTER PACK in 1 CARTON (67877-177-85)  / 10 TABLET in 1 BLISTER PACK (67877-177-33) </PackageDescription>
    <NDC11Code>67877-0177-85</NDC11Code>
    <ProductNDC>67877-177</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Olanzapine</ProprietaryName>
    <NonProprietaryName>Olanzapine</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20120101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202295</ApplicationNumber>
    <LabelerName>Ascend Laboratories, LLC</LabelerName>
    <SubstanceName>OLANZAPINE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Olanzapine is an atypical antipsychotic indicated. As oral formulation for the: 1 Treatment of schizophrenia. (1.1), 2 Adults: Efficacy was established in three clinical trials in patients with schizophrenia: two 6-week trials and one maintenance trial. (14.1), 3 Adolescents (ages 13 to 17): Efficacy was established in one 6-week trial in patients with schizophrenia (14.1). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.1), 4 Acute treatment of manic or mixed episodes associated with bipolar I disorder and maintenance treatment of bipolar I disorder. (1.2), 5 Adults: Efficacy was established in three clinical trials in patients with manic or mixed episodes of bipolar I disorder: two 3-to 4-week trials and one maintenance trial. (14.2), 6 Adolescents (ages 13 to 17): Efficacy was established in one 3-week trial in patients with manic or mixed episodes associated with bipolar I disorder (14.2). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.2), 7 Medication therapy for pediatric patients with schizophrenia or bipolar I disorder should be undertaken only after a thorough diagnostic evaluation and with careful consideration of the potential risks. (1.3), 8 Adjunct to valproate or lithium in the treatment of manic or mixed episodes associated with bipolar I disorder. (1.2), 9 Efficacy was established in two 6-week clinical trials in adults (14.2). Maintenance efficacy has not been systematically evaluated.As Olanzapine and Fluoxetine in Combination for the:, 10 Treatment of depressive episodes associated with bipolar I disorder. (1.5), 11 Efficacy was established with Symbyax (olanzapine and fluoxetine in combination); refer to the product label for Symbyax., 12 Treatment of treatment resistant depression. (1.6), 13 Efficacy was established with Symbyax (olanzapine and fluoxetine in combination) in adults; refer to the product label for Symbyax.</IndicationAndUsage>
    <Description>Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is. Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water.       Olanzapine tablets, USP are intended for oral administration only. Each tablet contains olanzapine, USP equivalent to 2.5 mg (8 μmol), 5 mg (16 μmol), 7.5 mg (24 μmol), 10 mg (32 μmol), 15 mg (48 μmol), or 20 mg (64 μmol). Inactive ingredients are lactose monohydrate, hydroxypropyl cellulose, mannitol, and magnesium stearate. The color coating contains pectin, triacetin, titanium dioxide, talc, and FD&amp;C Blue No. 2 Aluminum Lake (15 mg strength) or Iron Oxide Red (20 mg strength). Olanzapine tablets, USP of all strengths are imprinted with edible ink which contains shellac, Iron Oxide Black, N-Butyl Alcohol, Propylene Glycol, Ammonium Hydroxide.  FDA approved dissolution test specifications differ from USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>68382-177-01</NDCCode>
    <PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (68382-177-01) </PackageDescription>
    <NDC11Code>68382-0177-01</NDC11Code>
    <ProductNDC>68382-177</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Galantamine</ProprietaryName>
    <NonProprietaryName>Galantamine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20111010</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078898</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>GALANTAMINE HYDROBROMIDE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-04-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20111010</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Galantamine is a cholinesterase inhibitor indicated for the treatment of mild to moderate dementia of the Alzheimer's type (1).</IndicationAndUsage>
    <Description>Galantamine tablets, USP are galantamine hydrobromide, a reversible, competitive acetylcholinesterase inhibitor. Galantamine hydrobromide is known chemically as (4aS, 6R, 8aS)-4a, 5, 9, 10, 11, 12-hexahydro-3-methoxy-11-methyl-6H-benzofuro[3a, 3, 2- ef][2]benzazepin-6-ol hydrobromide. It has a molecular formula of C17H21NO3HBr and a molecular weight of 368.27. Galantamine hydrobromide, USP is a white to almost white powder and is soluble in 0.1 N sodium hydroxide, sparingly soluble in water, very slightly soluble in alcohol and insoluble in n-propanol. The structural formula for galantamine hydrobromide is:. Galantamine Tablets USP, for oral use are available as round, biconvex, filmcoated immediate release tablets of 4 mg (light-pink), 8 mg (off-white), and 12 mg (off-white). Each 4, 8, and 12 mg (base equivalent) tablet contains 5.126, 10.252, and 15.378 mg of galantamine hydrobromide, respectively. Inactive ingredients include colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, propylene glycol and titanium dioxide. Additionally each 4 mg tablet contains iron oxide red and each 8 mg and 12 mg tablet contains iron oxide yellow.</Description>
  </NDC>
  <NDC>
    <NDCCode>68382-177-10</NDCCode>
    <PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (68382-177-10) </PackageDescription>
    <NDC11Code>68382-0177-10</NDC11Code>
    <ProductNDC>68382-177</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Galantamine</ProprietaryName>
    <NonProprietaryName>Galantamine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20111010</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078898</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>GALANTAMINE HYDROBROMIDE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-04-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20111010</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Galantamine is a cholinesterase inhibitor indicated for the treatment of mild to moderate dementia of the Alzheimer's type (1).</IndicationAndUsage>
    <Description>Galantamine tablets, USP are galantamine hydrobromide, a reversible, competitive acetylcholinesterase inhibitor. Galantamine hydrobromide is known chemically as (4aS, 6R, 8aS)-4a, 5, 9, 10, 11, 12-hexahydro-3-methoxy-11-methyl-6H-benzofuro[3a, 3, 2- ef][2]benzazepin-6-ol hydrobromide. It has a molecular formula of C17H21NO3HBr and a molecular weight of 368.27. Galantamine hydrobromide, USP is a white to almost white powder and is soluble in 0.1 N sodium hydroxide, sparingly soluble in water, very slightly soluble in alcohol and insoluble in n-propanol. The structural formula for galantamine hydrobromide is:. Galantamine Tablets USP, for oral use are available as round, biconvex, filmcoated immediate release tablets of 4 mg (light-pink), 8 mg (off-white), and 12 mg (off-white). Each 4, 8, and 12 mg (base equivalent) tablet contains 5.126, 10.252, and 15.378 mg of galantamine hydrobromide, respectively. Inactive ingredients include colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, propylene glycol and titanium dioxide. Additionally each 4 mg tablet contains iron oxide red and each 8 mg and 12 mg tablet contains iron oxide yellow.</Description>
  </NDC>
  <NDC>
    <NDCCode>68382-177-14</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (68382-177-14) </PackageDescription>
    <NDC11Code>68382-0177-14</NDC11Code>
    <ProductNDC>68382-177</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Galantamine</ProprietaryName>
    <NonProprietaryName>Galantamine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20111010</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078898</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>GALANTAMINE HYDROBROMIDE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-04-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20111010</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Galantamine is a cholinesterase inhibitor indicated for the treatment of mild to moderate dementia of the Alzheimer's type (1).</IndicationAndUsage>
    <Description>Galantamine tablets, USP are galantamine hydrobromide, a reversible, competitive acetylcholinesterase inhibitor. Galantamine hydrobromide is known chemically as (4aS, 6R, 8aS)-4a, 5, 9, 10, 11, 12-hexahydro-3-methoxy-11-methyl-6H-benzofuro[3a, 3, 2- ef][2]benzazepin-6-ol hydrobromide. It has a molecular formula of C17H21NO3HBr and a molecular weight of 368.27. Galantamine hydrobromide, USP is a white to almost white powder and is soluble in 0.1 N sodium hydroxide, sparingly soluble in water, very slightly soluble in alcohol and insoluble in n-propanol. The structural formula for galantamine hydrobromide is:. Galantamine Tablets USP, for oral use are available as round, biconvex, filmcoated immediate release tablets of 4 mg (light-pink), 8 mg (off-white), and 12 mg (off-white). Each 4, 8, and 12 mg (base equivalent) tablet contains 5.126, 10.252, and 15.378 mg of galantamine hydrobromide, respectively. Inactive ingredients include colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, propylene glycol and titanium dioxide. Additionally each 4 mg tablet contains iron oxide red and each 8 mg and 12 mg tablet contains iron oxide yellow.</Description>
  </NDC>
  <NDC>
    <NDCCode>68382-177-77</NDCCode>
    <PackageDescription>100 BLISTER PACK in 1 CARTON (68382-177-77)  &gt; 1 TABLET, FILM COATED in 1 BLISTER PACK (68382-177-30) </PackageDescription>
    <NDC11Code>68382-0177-77</NDC11Code>
    <ProductNDC>68382-177</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Galantamine</ProprietaryName>
    <NonProprietaryName>Galantamine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20111010</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078898</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>GALANTAMINE HYDROBROMIDE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-04-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20111010</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Galantamine is a cholinesterase inhibitor indicated for the treatment of mild to moderate dementia of the Alzheimer's type (1).</IndicationAndUsage>
    <Description>Galantamine tablets, USP are galantamine hydrobromide, a reversible, competitive acetylcholinesterase inhibitor. Galantamine hydrobromide is known chemically as (4aS, 6R, 8aS)-4a, 5, 9, 10, 11, 12-hexahydro-3-methoxy-11-methyl-6H-benzofuro[3a, 3, 2- ef][2]benzazepin-6-ol hydrobromide. It has a molecular formula of C17H21NO3HBr and a molecular weight of 368.27. Galantamine hydrobromide, USP is a white to almost white powder and is soluble in 0.1 N sodium hydroxide, sparingly soluble in water, very slightly soluble in alcohol and insoluble in n-propanol. The structural formula for galantamine hydrobromide is:. Galantamine Tablets USP, for oral use are available as round, biconvex, filmcoated immediate release tablets of 4 mg (light-pink), 8 mg (off-white), and 12 mg (off-white). Each 4, 8, and 12 mg (base equivalent) tablet contains 5.126, 10.252, and 15.378 mg of galantamine hydrobromide, respectively. Inactive ingredients include colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, propylene glycol and titanium dioxide. Additionally each 4 mg tablet contains iron oxide red and each 8 mg and 12 mg tablet contains iron oxide yellow.</Description>
  </NDC>
</NDCList>