{
"NDC": [
{
"NDCCode": "71863-216-04",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (71863-216-04) / 4 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "71863-0216-04",
"ProductNDC": "71863-216",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Increlex",
"NonProprietaryName": "Mecasermin",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20250416",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA021839",
"LabelerName": "Eton Pharmaceuticals, Inc.",
"SubstanceName": "MECASERMIN",
"StrengthNumber": "40",
"StrengthUnit": "mg/4mL",
"Status": "Active",
"LastUpdate": "2026-05-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250416",
"SamplePackage": "N",
"IndicationAndUsage": "INCRELEX (mecasermin) injection is indicated for the treatment of growth failure in pediatric patients 2 years of age and older with severe primary IGF- 1 deficiency or with growth hormone (GH) gene deletion who have developed neutralizing antibodies to GH. ( 1). Limitations of use: INCRELEX is not a substitute to GH for approved GH indications.",
"Description": "Mecasermin is a human insulin-like growth factor-1 (rhIGF-1) produced by recombinant DNA technology. IGF-1 consists of 70 amino acids in a single chain with three intramolecular disulfide bridges and a molecular weight of 7649 Da. The amino acid sequence of the product is identical to that of endogenous human IGF-1. The rhIGF-1 protein is synthesized in bacteria ( E. coli) that have been modified by the addition of the gene for human IGF-1. INCRELEX (mecasermin) injection is a sterile, aqueous, clear and colorless solution intended for subcutaneous injection. Each multiple-dose vial of INCRELEX contains 40 mg of mecasermin in 4 mL solution, and each mL contains 10 mg mecasermin, 9 mg benzyl alcohol, 0.43 mg glacial acetic acid, 2 mg polysorbate 20, 3.51 mg sodium acetate, and 5.84 mg sodium chloride in Water for Injection, USP at a pH of approximately 5.4."
},
{
"NDCCode": "31260-216-04",
"PackageDescription": "136 kg in 1 DRUM (31260-216-04) ",
"NDC11Code": "31260-0216-04",
"ProductNDC": "31260-216",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Aluminum Sesquichlorohydrate",
"DosageFormName": "POWDER",
"StartMarketingDate": "20200117",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Gulbrandsen Technologies India Private Limited",
"SubstanceName": "ALUMINUM SESQUICHLOROHYDRATE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2025-12-19",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "17-JAN-20"
},
{
"NDCCode": "47993-216-04",
"PackageDescription": "30 g in 1 TUBE (47993-216-04) ",
"NDC11Code": "47993-0216-04",
"ProductNDC": "47993-216",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sunscreen Spf30",
"NonProprietaryName": "Sunscreen Spf30",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20150220",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "NINGBO JIANGBEI OCEAN STAR TRADING CO.,LTD",
"SubstanceName": "PEG-100 STEARATE; TITANIUM DIOXIDE; ETHYLHEXYL METHOXYCRYLENE; BENZOPHENONE; AVOBENZONE",
"StrengthNumber": "2.5; 4; 1.25; .5; .75",
"StrengthUnit": "g/100g; g/100g; g/100g; g/100g; g/100g",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20150601",
"SamplePackage": "N",
"IndicationAndUsage": "Directions. Apply liberally 15 minutes before sun exposure and reapply as need."
},
{
"NDCCode": "59900-216-04",
"PackageDescription": "4 BOTTLE in 1 CASE (59900-216-04) / 1200 mL in 1 BOTTLE",
"NDC11Code": "59900-0216-04",
"ProductNDC": "59900-216",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Softensure Antimicrobial Foam",
"NonProprietaryName": "Benzalkonium Chloride",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20231226",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "505G(a)(3)",
"LabelerName": "Best Sanitizers, Inc",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": ".13",
"StrengthUnit": "mg/100mL",
"Status": "Active",
"LastUpdate": "2024-12-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231226",
"SamplePackage": "N",
"IndicationAndUsage": " handwash to help reduce bacteria that potentially can cause disease. helps to prevent cross-contamination by hand contact. helps to prevent drying of the skin. recommended for repeated use."
},
{
"NDCCode": "63029-216-04",
"PackageDescription": "4 POWDER in 1 CARTON (63029-216-04) ",
"NDC11Code": "63029-0216-04",
"ProductNDC": "63029-216",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Bc",
"ProprietaryNameSuffix": "Sinus Congestion And Pain",
"NonProprietaryName": "Acetaminophen, Chlorpheniramine Maleate, Phenylephrine Hydrochloride",
"DosageFormName": "POWDER",
"RouteName": "ORAL",
"StartMarketingDate": "20160301",
"EndMarketingDate": "20200630",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "Medtech Products Inc.",
"SubstanceName": "ACETAMINOPHEN; CHLORPHENIRAMINE MALEATE; PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "650; 4; 10",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Status": "Deprecated",
"LastUpdate": "2020-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20160301",
"EndMarketingDatePackage": "20200630",
"SamplePackage": "N"
},
{
"NDCCode": "63545-216-04",
"PackageDescription": "4000 PELLET in 1 BOTTLE, GLASS (63545-216-04) ",
"NDC11Code": "63545-0216-04",
"ProductNDC": "63545-216",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Arsenicum Sulphuratum Flavum",
"NonProprietaryName": "Arsenicum Sulphuratum Flavum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20210330",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, Inc.",
"SubstanceName": "ARSENIC TRISULFIDE",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2021-04-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210330",
"SamplePackage": "N"
},
{
"NDCCode": "63730-216-04",
"PackageDescription": "200 mL in 1 PACKAGE (63730-216-04)",
"NDC11Code": "63730-0216-04",
"ProductNDC": "63730-216",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Tensolift",
"NonProprietaryName": "Avobenzone, Homosalate, Octinoxate, Octyocrelene, Oxybenzone",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20100607",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Natura Bisse International, S.A.",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTINOXATE; OCTOCRYLENE; OXYBENZONE",
"StrengthNumber": "2.76; 8.76; 3.65; 2.19; 921",
"StrengthUnit": "g/90mL; mL/90mL; mL/90mL; mL/90mL; mg/90mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "65856-216-04",
"PackageDescription": "671 L in 1 CYLINDER (65856-216-04)",
"NDC11Code": "65856-0216-04",
"ProductNDC": "65856-216",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxygen",
"NonProprietaryName": "Oxygen",
"DosageFormName": "GAS",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "19920101",
"MarketingCategoryName": "UNAPPROVED MEDICAL GAS",
"LabelerName": "Breathe Easy Therapeutics, Inc",
"SubstanceName": "OXYGEN",
"StrengthNumber": "99",
"StrengthUnit": "L/100L",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "66326-216-04",
"PackageDescription": "50 kg in 1 DRUM (66326-216-04) ",
"NDC11Code": "66326-0216-04",
"ProductNDC": "66326-216",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Sulfamethoxazole",
"DosageFormName": "GRANULE",
"StartMarketingDate": "20200103",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Sri Krishna Pharmaceuticals, Ltd.",
"SubstanceName": "SULFAMETHOXAZOLE; TRIMETHOPRIM",
"StrengthNumber": "775; 155",
"StrengthUnit": "g/kg; g/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "03-JAN-20"
},
{
"NDCCode": "68786-216-04",
"PackageDescription": "1728 PACKET in 1 CASE (68786-216-04) > .5 g in 1 PACKET",
"NDC11Code": "68786-0216-04",
"ProductNDC": "68786-216",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Bacitracin Zinc, Neomycin Sulfate And Polymyxin B Sulfate",
"NonProprietaryName": "Bacitracin Zinc, Neomycin Sulfate And Polymyxin B Sulfate",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20120709",
"EndMarketingDate": "20221231",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part333B",
"LabelerName": "Sion Biotext Medical Ltd",
"SubstanceName": "BACITRACIN ZINC; NEOMYCIN SULFATE; POLYMYXIN B SULFATE",
"StrengthNumber": "400; 5; 5000",
"StrengthUnit": "[iU]/g; mg/g; [iU]/g",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Decreased Cell Wall Synthesis & Repair [PE], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20120711",
"EndMarketingDatePackage": "20221231",
"SamplePackage": "N"
},
{
"NDCCode": "71198-004-04",
"PackageDescription": "80 POUCH in 1 PACKAGE (71198-004-04) > 216 g in 1 POUCH",
"NDC11Code": "71198-0004-04",
"ProductNDC": "71198-004",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sanitizing Wipes",
"NonProprietaryName": "Ethyl Alcohol",
"DosageFormName": "SWAB",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200621",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "HANGZHOU BRIGHT DAILY CHEMICAL CO.,LTD",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "75",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20200621",
"SamplePackage": "N",
"IndicationAndUsage": "To sanitize."
},
{
"NDCCode": "72789-216-04",
"PackageDescription": "4 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (72789-216-04) ",
"NDC11Code": "72789-0216-04",
"ProductNDC": "72789-216",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroxyzine Hydrochloride",
"NonProprietaryName": "Hydroxyzine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20121009",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088618",
"LabelerName": "PD-Rx Pharmaceuticals, Inc.",
"SubstanceName": "HYDROXYZINE DIHYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antihistamine [EPC], Histamine Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-08-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230817",
"SamplePackage": "N",
"IndicationAndUsage": "For symptomatic relief of anxiety and tension associated with psychoneurosis and as an adjunct in organic disease states in which anxiety is manifested. Useful in the management of pruritus due to allergic conditions such as chronic urticaria and atopic and contact dermatoses and in histamine-mediated pruritus. As a sedative when used as a premedication and following general anesthesia, hydroxyzine may potentiate meperidine and barbiturates, so their use in pre-anesthetic adjunctive therapy should be modified on an individual basis. Atropine and other belladonna alkaloids are not affected by the drug. Hydroxyzine is not known to interfere with the action of digitalis in any way and it may be used concurrently with this agent. The effectiveness of hydroxyzine as an antianxiety agent for long term use, that is more than 4 months, has not been assessed by systematic clinical studies. The physician should reassess periodically the usefulness of the drug for the individual patient.",
"Description": "Hydroxyzine hydrochloride, USP has the chemical name of 2-[2-[4-( p-Chloro-α-phenylbenzyl)-1-piperazinyl]ethoxy] ethanol dihydrochloride. C 21H 27ClN 2O 2· 2HCl M.W. 447.83. Hydroxyzine hydrochloride, USP occurs as a white, odorless powder which is very soluble in water. Each tablet for oral administration contains 10 mg, 25 mg or 50 mg hydroxyzine hydrochloride, USP. Inactive ingredients include anhydrous lactose, carnauba wax, colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, sodium starch glycolate, titanium dioxide and triacetin."
},
{
"NDCCode": "75936-216-04",
"PackageDescription": "15 mL in 1 BOTTLE (75936-216-04) ",
"NDC11Code": "75936-0216-04",
"ProductNDC": "75936-216",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Glow Screen Spf 40",
"NonProprietaryName": "Avobenzone, Octisalate, Octocylene",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200101",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "Supergoop, LLC",
"SubstanceName": "AVOBENZONE; OCTISALATE; OCTOCRYLENE",
"StrengthNumber": "3; 5; 10",
"StrengthUnit": "g/100mL; g/100mL; g/100mL",
"Status": "Active",
"LastUpdate": "2026-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200101",
"SamplePackage": "N"
},
{
"NDCCode": "85673-216-04",
"PackageDescription": "50 g in 1 BOTTLE (85673-216-04) ",
"NDC11Code": "85673-0216-04",
"ProductNDC": "85673-216",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Semaglutide",
"DosageFormName": "POWDER",
"StartMarketingDate": "20250526",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "SENOVA TECHNOLOGY CO., LTD",
"SubstanceName": "SEMAGLUTIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "26-MAY-25"
},
{
"NDCCode": "0026-3942-25",
"PackageDescription": "1 KIT in 1 BOX (0026-3942-25) * 2.5 mL in 1 VIAL (0026-4942-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4942-01) ",
"NDC11Code": "00026-3942-25",
"ProductNDC": "0026-3942",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Jivi",
"NonProprietaryName": "Antihemophilic Factor (recombinant) Pegylated-aucl",
"DosageFormName": "KIT",
"StartMarketingDate": "20180830",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125661",
"LabelerName": "Bayer HealthCare LLC",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180830",
"SamplePackage": "N",
"IndicationAndUsage": "JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .",
"Description": "JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins."
},
{
"NDCCode": "0026-3942-99",
"PackageDescription": "1 KIT in 1 BOX (0026-3942-99) * 2.5 mL in 1 VIAL (0026-4942-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4942-01) ",
"NDC11Code": "00026-3942-99",
"ProductNDC": "0026-3942",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Jivi",
"NonProprietaryName": "Antihemophilic Factor (recombinant) Pegylated-aucl",
"DosageFormName": "KIT",
"StartMarketingDate": "20180830",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125661",
"LabelerName": "Bayer HealthCare LLC",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180830",
"SamplePackage": "N",
"IndicationAndUsage": "JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .",
"Description": "JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins."
},
{
"NDCCode": "0026-3944-25",
"PackageDescription": "1 KIT in 1 BOX (0026-3944-25) * 2.5 mL in 1 VIAL (0026-4944-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4944-01) ",
"NDC11Code": "00026-3944-25",
"ProductNDC": "0026-3944",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Jivi",
"NonProprietaryName": "Antihemophilic Factor (recombinant) Pegylated-aucl",
"DosageFormName": "KIT",
"StartMarketingDate": "20180830",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125661",
"LabelerName": "Bayer HealthCare LLC",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180830",
"SamplePackage": "N",
"IndicationAndUsage": "JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .",
"Description": "JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins."
},
{
"NDCCode": "0026-3944-99",
"PackageDescription": "1 KIT in 1 BOX (0026-3944-99) * 2.5 mL in 1 VIAL (0026-4944-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4944-01) ",
"NDC11Code": "00026-3944-99",
"ProductNDC": "0026-3944",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Jivi",
"NonProprietaryName": "Antihemophilic Factor (recombinant) Pegylated-aucl",
"DosageFormName": "KIT",
"StartMarketingDate": "20180830",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125661",
"LabelerName": "Bayer HealthCare LLC",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180830",
"SamplePackage": "N",
"IndicationAndUsage": "JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .",
"Description": "JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins."
},
{
"NDCCode": "0026-3946-25",
"PackageDescription": "1 KIT in 1 BOX (0026-3946-25) * 2.5 mL in 1 VIAL (0026-4946-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4946-01) ",
"NDC11Code": "00026-3946-25",
"ProductNDC": "0026-3946",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Jivi",
"NonProprietaryName": "Antihemophilic Factor (recombinant) Pegylated-aucl",
"DosageFormName": "KIT",
"StartMarketingDate": "20180830",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125661",
"LabelerName": "Bayer HealthCare LLC",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180830",
"SamplePackage": "N",
"IndicationAndUsage": "JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .",
"Description": "JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins."
},
{
"NDCCode": "0026-3946-99",
"PackageDescription": "1 KIT in 1 BOX (0026-3946-99) * 2.5 mL in 1 VIAL (0026-4946-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4946-01) ",
"NDC11Code": "00026-3946-99",
"ProductNDC": "0026-3946",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Jivi",
"NonProprietaryName": "Antihemophilic Factor (recombinant) Pegylated-aucl",
"DosageFormName": "KIT",
"StartMarketingDate": "20180830",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125661",
"LabelerName": "Bayer HealthCare LLC",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180830",
"SamplePackage": "N",
"IndicationAndUsage": "JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .",
"Description": "JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins."
},
{
"NDCCode": "0026-3948-25",
"PackageDescription": "1 KIT in 1 BOX (0026-3948-25) * 2.5 mL in 1 VIAL (0026-4948-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4948-01) ",
"NDC11Code": "00026-3948-25",
"ProductNDC": "0026-3948",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Jivi",
"NonProprietaryName": "Antihemophilic Factor (recombinant) Pegylated-aucl",
"DosageFormName": "KIT",
"StartMarketingDate": "20180830",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125661",
"LabelerName": "Bayer HealthCare LLC",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180830",
"SamplePackage": "N",
"IndicationAndUsage": "JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .",
"Description": "JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins."
},
{
"NDCCode": "0026-3948-99",
"PackageDescription": "1 KIT in 1 BOX (0026-3948-99) * 2.5 mL in 1 VIAL (0026-4948-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4948-01) ",
"NDC11Code": "00026-3948-99",
"ProductNDC": "0026-3948",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Jivi",
"NonProprietaryName": "Antihemophilic Factor (recombinant) Pegylated-aucl",
"DosageFormName": "KIT",
"StartMarketingDate": "20180830",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125661",
"LabelerName": "Bayer HealthCare LLC",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180830",
"SamplePackage": "N",
"IndicationAndUsage": "JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .",
"Description": "JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins."
},
{
"NDCCode": "0026-3950-50",
"PackageDescription": "1 KIT in 1 BOX (0026-3950-50) * 5 mL in 1 VIAL (0026-4950-99) * 5 mL in 1 SYRINGE (0026-0426-05) * 5 mL in 1 VIAL, SINGLE-USE (0026-4950-01) * 5 mL in 1 SYRINGE (0026-0426-15) ",
"NDC11Code": "00026-3950-50",
"ProductNDC": "0026-3950",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Jivi",
"NonProprietaryName": "Antihemophilic Factor (recombinant) Pegylated-aucl",
"DosageFormName": "KIT",
"StartMarketingDate": "20241202",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125661",
"LabelerName": "Bayer HealthCare LLC",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241202",
"SamplePackage": "N",
"IndicationAndUsage": "JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .",
"Description": "JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins."
},
{
"NDCCode": "0026-3950-99",
"PackageDescription": "1 KIT in 1 BOX (0026-3950-99) * 5 mL in 1 VIAL (0026-4950-99) * 5 mL in 1 SYRINGE (0026-0426-05) * 5 mL in 1 VIAL, SINGLE-USE (0026-4950-01) * 5 mL in 1 SYRINGE (0026-0426-15) ",
"NDC11Code": "00026-3950-99",
"ProductNDC": "0026-3950",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Jivi",
"NonProprietaryName": "Antihemophilic Factor (recombinant) Pegylated-aucl",
"DosageFormName": "KIT",
"StartMarketingDate": "20241202",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125661",
"LabelerName": "Bayer HealthCare LLC",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241202",
"SamplePackage": "N",
"IndicationAndUsage": "JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .",
"Description": "JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins."
},
{
"NDCCode": "0409-3374-02",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (0409-3374-02) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-USE (0409-3374-11) ",
"NDC11Code": "00409-3374-02",
"ProductNDC": "0409-3374",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Piperacillin And Tazobactam",
"NonProprietaryName": "Piperacillin And Tazobactam",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS; PARENTERAL",
"StartMarketingDate": "20101021",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065363",
"LabelerName": "Hospira, Inc",
"SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
"StrengthNumber": "2; .25",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-04-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20101021",
"SamplePackage": "N",
"IndicationAndUsage": "Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1), 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2), 3 Skin and skin structure infections in adults (1.3), 4 Female pelvic infections in adults (1.4), 5 Community-acquired pneumonia in adults (1.5).",
"Description": "Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine‑carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2‑carboxylate. The chemical formula is C23H26N5NaO7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1‑azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C10H11N4NaO5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is. Piperacillin and tazobactam for injection, USP, is a white to yellowish sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. Dilute solutions are colorless to yellowish. Each piperacillin and tazobactam for injection, USP 2.25 g single-dose ADD-Vantage® vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. Each vial contains 4.69 mEq (108 mg) of sodium. Each piperacillin and tazobactam for injection, USP 3.375 g single-dose ADD-Vantage® vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. Each vial contains 7.04 mEq (162 mg) of sodium. Each piperacillin and tazobactam for injection, USP 4.5 g single-dose ADD-Vantage® vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Each vial contains 9.39 mEq (216 mg) of sodium. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Meets USP Organic Impurities Procedure 3."
},
{
"NDCCode": "0409-3378-13",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (0409-3378-13) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-USE (0409-3378-11) ",
"NDC11Code": "00409-3378-13",
"ProductNDC": "0409-3378",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Piperacillin And Tazobactam",
"NonProprietaryName": "Piperacillin And Tazobactam",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS; PARENTERAL",
"StartMarketingDate": "20101021",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065363",
"LabelerName": "Hospira, Inc",
"SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
"StrengthNumber": "3; .375",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-04-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20101021",
"SamplePackage": "N",
"IndicationAndUsage": "Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1), 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2), 3 Skin and skin structure infections in adults (1.3), 4 Female pelvic infections in adults (1.4), 5 Community-acquired pneumonia in adults (1.5).",
"Description": "Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine‑carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2‑carboxylate. The chemical formula is C23H26N5NaO7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1‑azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C10H11N4NaO5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is. Piperacillin and tazobactam for injection, USP, is a white to yellowish sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. Dilute solutions are colorless to yellowish. Each piperacillin and tazobactam for injection, USP 2.25 g single-dose ADD-Vantage® vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. Each vial contains 4.69 mEq (108 mg) of sodium. Each piperacillin and tazobactam for injection, USP 3.375 g single-dose ADD-Vantage® vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. Each vial contains 7.04 mEq (162 mg) of sodium. Each piperacillin and tazobactam for injection, USP 4.5 g single-dose ADD-Vantage® vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Each vial contains 9.39 mEq (216 mg) of sodium. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Meets USP Organic Impurities Procedure 3."
},
{
"NDCCode": "0409-3379-04",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (0409-3379-04) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-USE (0409-3379-11) ",
"NDC11Code": "00409-3379-04",
"ProductNDC": "0409-3379",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Piperacillin And Tazobactam",
"NonProprietaryName": "Piperacillin And Tazobactam",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS; PARENTERAL",
"StartMarketingDate": "20101021",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065363",
"LabelerName": "Hospira, Inc",
"SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
"StrengthNumber": "4; .5",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-04-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20101021",
"SamplePackage": "N",
"IndicationAndUsage": "Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1), 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2), 3 Skin and skin structure infections in adults (1.3), 4 Female pelvic infections in adults (1.4), 5 Community-acquired pneumonia in adults (1.5).",
"Description": "Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine‑carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2‑carboxylate. The chemical formula is C23H26N5NaO7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1‑azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C10H11N4NaO5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is. Piperacillin and tazobactam for injection, USP, is a white to yellowish sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. Dilute solutions are colorless to yellowish. Each piperacillin and tazobactam for injection, USP 2.25 g single-dose ADD-Vantage® vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. Each vial contains 4.69 mEq (108 mg) of sodium. Each piperacillin and tazobactam for injection, USP 3.375 g single-dose ADD-Vantage® vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. Each vial contains 7.04 mEq (162 mg) of sodium. Each piperacillin and tazobactam for injection, USP 4.5 g single-dose ADD-Vantage® vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Each vial contains 9.39 mEq (216 mg) of sodium. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Meets USP Organic Impurities Procedure 3."
},
{
"NDCCode": "0409-3383-02",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (0409-3383-02) / 10 mL in 1 VIAL, SINGLE-USE (0409-3383-11) ",
"NDC11Code": "00409-3383-02",
"ProductNDC": "0409-3383",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Piperacillin And Tazobactam",
"NonProprietaryName": "Piperacillin And Tazobactam",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS; PARENTERAL",
"StartMarketingDate": "20101021",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065362",
"LabelerName": "Hospira, Inc",
"SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
"StrengthNumber": "2; .25",
"StrengthUnit": "g/10mL; g/10mL",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20101021",
"EndMarketingDatePackage": "20261231",
"SamplePackage": "N",
"IndicationAndUsage": "Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1), 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2), 3 Skin and skin structure infections in adults (1.3), 4 Female pelvic infections in adults (1.4), 5 Community-acquired pneumonia in adults (1.5).",
"Description": "Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine‑carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2‑carboxylate. The chemical formula is C23H26N5NaO7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1‑azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C10H11N4NaO5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is. Piperacillin and tazobactam for injection, USP, is a white to yellowish sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. Dilute solutions are colorless to yellowish. Each piperacillin and tazobactam for injection, USP 2.25 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. Each vial contains 4.69 mEq (108 mg) of sodium. Each piperacillin and tazobactam for injection, USP 3.375 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. Each vial contains 7.04 mEq (162 mg) of sodium. Each piperacillin and tazobactam for injection, USP 4.5 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Each vial contains 9.39 mEq (216 mg) of sodium. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Meets USP Organic Impurities Procedure 3."
},
{
"NDCCode": "0409-3383-10",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (0409-3383-10) / 10 mL in 1 VIAL, SINGLE-USE (0409-3383-11) ",
"NDC11Code": "00409-3383-10",
"ProductNDC": "0409-3383",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Piperacillin And Tazobactam",
"NonProprietaryName": "Piperacillin And Tazobactam",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS; PARENTERAL",
"StartMarketingDate": "20101021",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065362",
"LabelerName": "Hospira, Inc",
"SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
"StrengthNumber": "2; .25",
"StrengthUnit": "g/10mL; g/10mL",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250609",
"SamplePackage": "N",
"IndicationAndUsage": "Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1), 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2), 3 Skin and skin structure infections in adults (1.3), 4 Female pelvic infections in adults (1.4), 5 Community-acquired pneumonia in adults (1.5).",
"Description": "Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine‑carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2‑carboxylate. The chemical formula is C23H26N5NaO7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1‑azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C10H11N4NaO5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is. Piperacillin and tazobactam for injection, USP, is a white to yellowish sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. Dilute solutions are colorless to yellowish. Each piperacillin and tazobactam for injection, USP 2.25 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. Each vial contains 4.69 mEq (108 mg) of sodium. Each piperacillin and tazobactam for injection, USP 3.375 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. Each vial contains 7.04 mEq (162 mg) of sodium. Each piperacillin and tazobactam for injection, USP 4.5 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Each vial contains 9.39 mEq (216 mg) of sodium. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Meets USP Organic Impurities Procedure 3."
},
{
"NDCCode": "0409-3385-13",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (0409-3385-13) / 15 mL in 1 VIAL, SINGLE-USE (0409-3385-11) ",
"NDC11Code": "00409-3385-13",
"ProductNDC": "0409-3385",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Piperacillin And Tazobactam",
"NonProprietaryName": "Piperacillin And Tazobactam",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS; PARENTERAL",
"StartMarketingDate": "20101021",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065362",
"LabelerName": "Hospira, Inc",
"SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
"StrengthNumber": "3; .375",
"StrengthUnit": "g/15mL; g/15mL",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-06-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20101021",
"SamplePackage": "N",
"IndicationAndUsage": "Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1), 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2), 3 Skin and skin structure infections in adults (1.3), 4 Female pelvic infections in adults (1.4), 5 Community-acquired pneumonia in adults (1.5).",
"Description": "Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine‑carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2‑carboxylate. The chemical formula is C23H26N5NaO7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1‑azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C10H11N4NaO5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is. Piperacillin and tazobactam for injection, USP, is a white to yellowish sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. Dilute solutions are colorless to yellowish. Each piperacillin and tazobactam for injection, USP 2.25 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. Each vial contains 4.69 mEq (108 mg) of sodium. Each piperacillin and tazobactam for injection, USP 3.375 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. Each vial contains 7.04 mEq (162 mg) of sodium. Each piperacillin and tazobactam for injection, USP 4.5 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Each vial contains 9.39 mEq (216 mg) of sodium. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Meets USP Organic Impurities Procedure 3."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>71863-216-04</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (71863-216-04) / 4 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>71863-0216-04</NDC11Code>
<ProductNDC>71863-216</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Increlex</ProprietaryName>
<NonProprietaryName>Mecasermin</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20250416</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA021839</ApplicationNumber>
<LabelerName>Eton Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>MECASERMIN</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/4mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-05-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250416</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>INCRELEX (mecasermin) injection is indicated for the treatment of growth failure in pediatric patients 2 years of age and older with severe primary IGF- 1 deficiency or with growth hormone (GH) gene deletion who have developed neutralizing antibodies to GH. ( 1). Limitations of use: INCRELEX is not a substitute to GH for approved GH indications.</IndicationAndUsage>
<Description>Mecasermin is a human insulin-like growth factor-1 (rhIGF-1) produced by recombinant DNA technology. IGF-1 consists of 70 amino acids in a single chain with three intramolecular disulfide bridges and a molecular weight of 7649 Da. The amino acid sequence of the product is identical to that of endogenous human IGF-1. The rhIGF-1 protein is synthesized in bacteria ( E. coli) that have been modified by the addition of the gene for human IGF-1. INCRELEX (mecasermin) injection is a sterile, aqueous, clear and colorless solution intended for subcutaneous injection. Each multiple-dose vial of INCRELEX contains 40 mg of mecasermin in 4 mL solution, and each mL contains 10 mg mecasermin, 9 mg benzyl alcohol, 0.43 mg glacial acetic acid, 2 mg polysorbate 20, 3.51 mg sodium acetate, and 5.84 mg sodium chloride in Water for Injection, USP at a pH of approximately 5.4.</Description>
</NDC>
<NDC>
<NDCCode>31260-216-04</NDCCode>
<PackageDescription>136 kg in 1 DRUM (31260-216-04) </PackageDescription>
<NDC11Code>31260-0216-04</NDC11Code>
<ProductNDC>31260-216</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Aluminum Sesquichlorohydrate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20200117</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Gulbrandsen Technologies India Private Limited</LabelerName>
<SubstanceName>ALUMINUM SESQUICHLOROHYDRATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-12-19</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>17-JAN-20</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>47993-216-04</NDCCode>
<PackageDescription>30 g in 1 TUBE (47993-216-04) </PackageDescription>
<NDC11Code>47993-0216-04</NDC11Code>
<ProductNDC>47993-216</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sunscreen Spf30</ProprietaryName>
<NonProprietaryName>Sunscreen Spf30</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20150220</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>NINGBO JIANGBEI OCEAN STAR TRADING CO.,LTD</LabelerName>
<SubstanceName>PEG-100 STEARATE; TITANIUM DIOXIDE; ETHYLHEXYL METHOXYCRYLENE; BENZOPHENONE; AVOBENZONE</SubstanceName>
<StrengthNumber>2.5; 4; 1.25; .5; .75</StrengthNumber>
<StrengthUnit>g/100g; g/100g; g/100g; g/100g; g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Directions. Apply liberally 15 minutes before sun exposure and reapply as need.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>59900-216-04</NDCCode>
<PackageDescription>4 BOTTLE in 1 CASE (59900-216-04) / 1200 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>59900-0216-04</NDC11Code>
<ProductNDC>59900-216</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Softensure Antimicrobial Foam</ProprietaryName>
<NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20231226</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>505G(a)(3)</ApplicationNumber>
<LabelerName>Best Sanitizers, Inc</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>.13</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-12-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231226</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage> handwash to help reduce bacteria that potentially can cause disease. helps to prevent cross-contamination by hand contact. helps to prevent drying of the skin. recommended for repeated use.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>63029-216-04</NDCCode>
<PackageDescription>4 POWDER in 1 CARTON (63029-216-04) </PackageDescription>
<NDC11Code>63029-0216-04</NDC11Code>
<ProductNDC>63029-216</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Bc</ProprietaryName>
<ProprietaryNameSuffix>Sinus Congestion And Pain</ProprietaryNameSuffix>
<NonProprietaryName>Acetaminophen, Chlorpheniramine Maleate, Phenylephrine Hydrochloride</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160301</StartMarketingDate>
<EndMarketingDate>20200630</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>Medtech Products Inc.</LabelerName>
<SubstanceName>ACETAMINOPHEN; CHLORPHENIRAMINE MALEATE; PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>650; 4; 10</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20160301</StartMarketingDatePackage>
<EndMarketingDatePackage>20200630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>63545-216-04</NDCCode>
<PackageDescription>4000 PELLET in 1 BOTTLE, GLASS (63545-216-04) </PackageDescription>
<NDC11Code>63545-0216-04</NDC11Code>
<ProductNDC>63545-216</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Arsenicum Sulphuratum Flavum</ProprietaryName>
<NonProprietaryName>Arsenicum Sulphuratum Flavum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210330</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, Inc.</LabelerName>
<SubstanceName>ARSENIC TRISULFIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2021-04-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210330</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>63730-216-04</NDCCode>
<PackageDescription>200 mL in 1 PACKAGE (63730-216-04)</PackageDescription>
<NDC11Code>63730-0216-04</NDC11Code>
<ProductNDC>63730-216</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Tensolift</ProprietaryName>
<NonProprietaryName>Avobenzone, Homosalate, Octinoxate, Octyocrelene, Oxybenzone</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20100607</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Natura Bisse International, S.A.</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTINOXATE; OCTOCRYLENE; OXYBENZONE</SubstanceName>
<StrengthNumber>2.76; 8.76; 3.65; 2.19; 921</StrengthNumber>
<StrengthUnit>g/90mL; mL/90mL; mL/90mL; mL/90mL; mg/90mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>65856-216-04</NDCCode>
<PackageDescription>671 L in 1 CYLINDER (65856-216-04)</PackageDescription>
<NDC11Code>65856-0216-04</NDC11Code>
<ProductNDC>65856-216</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxygen</ProprietaryName>
<NonProprietaryName>Oxygen</NonProprietaryName>
<DosageFormName>GAS</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>19920101</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED MEDICAL GAS</MarketingCategoryName>
<LabelerName>Breathe Easy Therapeutics, Inc</LabelerName>
<SubstanceName>OXYGEN</SubstanceName>
<StrengthNumber>99</StrengthNumber>
<StrengthUnit>L/100L</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>66326-216-04</NDCCode>
<PackageDescription>50 kg in 1 DRUM (66326-216-04) </PackageDescription>
<NDC11Code>66326-0216-04</NDC11Code>
<ProductNDC>66326-216</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Sulfamethoxazole</NonProprietaryName>
<DosageFormName>GRANULE</DosageFormName>
<StartMarketingDate>20200103</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Sri Krishna Pharmaceuticals, Ltd.</LabelerName>
<SubstanceName>SULFAMETHOXAZOLE; TRIMETHOPRIM</SubstanceName>
<StrengthNumber>775; 155</StrengthNumber>
<StrengthUnit>g/kg; g/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>03-JAN-20</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>68786-216-04</NDCCode>
<PackageDescription>1728 PACKET in 1 CASE (68786-216-04) > .5 g in 1 PACKET</PackageDescription>
<NDC11Code>68786-0216-04</NDC11Code>
<ProductNDC>68786-216</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Bacitracin Zinc, Neomycin Sulfate And Polymyxin B Sulfate</ProprietaryName>
<NonProprietaryName>Bacitracin Zinc, Neomycin Sulfate And Polymyxin B Sulfate</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20120709</StartMarketingDate>
<EndMarketingDate>20221231</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part333B</ApplicationNumber>
<LabelerName>Sion Biotext Medical Ltd</LabelerName>
<SubstanceName>BACITRACIN ZINC; NEOMYCIN SULFATE; POLYMYXIN B SULFATE</SubstanceName>
<StrengthNumber>400; 5; 5000</StrengthNumber>
<StrengthUnit>[iU]/g; mg/g; [iU]/g</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Decreased Cell Wall Synthesis & Repair [PE], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20120711</StartMarketingDatePackage>
<EndMarketingDatePackage>20221231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71198-004-04</NDCCode>
<PackageDescription>80 POUCH in 1 PACKAGE (71198-004-04) > 216 g in 1 POUCH</PackageDescription>
<NDC11Code>71198-0004-04</NDC11Code>
<ProductNDC>71198-004</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sanitizing Wipes</ProprietaryName>
<NonProprietaryName>Ethyl Alcohol</NonProprietaryName>
<DosageFormName>SWAB</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200621</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>HANGZHOU BRIGHT DAILY CHEMICAL CO.,LTD</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200621</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To sanitize.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>72789-216-04</NDCCode>
<PackageDescription>4 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (72789-216-04) </PackageDescription>
<NDC11Code>72789-0216-04</NDC11Code>
<ProductNDC>72789-216</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroxyzine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydroxyzine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121009</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088618</ApplicationNumber>
<LabelerName>PD-Rx Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>HYDROXYZINE DIHYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antihistamine [EPC], Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230817</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For symptomatic relief of anxiety and tension associated with psychoneurosis and as an adjunct in organic disease states in which anxiety is manifested. Useful in the management of pruritus due to allergic conditions such as chronic urticaria and atopic and contact dermatoses and in histamine-mediated pruritus. As a sedative when used as a premedication and following general anesthesia, hydroxyzine may potentiate meperidine and barbiturates, so their use in pre-anesthetic adjunctive therapy should be modified on an individual basis. Atropine and other belladonna alkaloids are not affected by the drug. Hydroxyzine is not known to interfere with the action of digitalis in any way and it may be used concurrently with this agent. The effectiveness of hydroxyzine as an antianxiety agent for long term use, that is more than 4 months, has not been assessed by systematic clinical studies. The physician should reassess periodically the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Hydroxyzine hydrochloride, USP has the chemical name of 2-[2-[4-( p-Chloro-α-phenylbenzyl)-1-piperazinyl]ethoxy] ethanol dihydrochloride. C 21H 27ClN 2O 2· 2HCl M.W. 447.83. Hydroxyzine hydrochloride, USP occurs as a white, odorless powder which is very soluble in water. Each tablet for oral administration contains 10 mg, 25 mg or 50 mg hydroxyzine hydrochloride, USP. Inactive ingredients include anhydrous lactose, carnauba wax, colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, sodium starch glycolate, titanium dioxide and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>75936-216-04</NDCCode>
<PackageDescription>15 mL in 1 BOTTLE (75936-216-04) </PackageDescription>
<NDC11Code>75936-0216-04</NDC11Code>
<ProductNDC>75936-216</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Glow Screen Spf 40</ProprietaryName>
<NonProprietaryName>Avobenzone, Octisalate, Octocylene</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>Supergoop, LLC</LabelerName>
<SubstanceName>AVOBENZONE; OCTISALATE; OCTOCRYLENE</SubstanceName>
<StrengthNumber>3; 5; 10</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>85673-216-04</NDCCode>
<PackageDescription>50 g in 1 BOTTLE (85673-216-04) </PackageDescription>
<NDC11Code>85673-0216-04</NDC11Code>
<ProductNDC>85673-216</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Semaglutide</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20250526</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>SENOVA TECHNOLOGY CO., LTD</LabelerName>
<SubstanceName>SEMAGLUTIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>26-MAY-25</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>0026-3942-25</NDCCode>
<PackageDescription>1 KIT in 1 BOX (0026-3942-25) * 2.5 mL in 1 VIAL (0026-4942-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4942-01) </PackageDescription>
<NDC11Code>00026-3942-25</NDC11Code>
<ProductNDC>0026-3942</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Jivi</ProprietaryName>
<NonProprietaryName>Antihemophilic Factor (recombinant) Pegylated-aucl</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20180830</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125661</ApplicationNumber>
<LabelerName>Bayer HealthCare LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180830</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .</IndicationAndUsage>
<Description>JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins.</Description>
</NDC>
<NDC>
<NDCCode>0026-3942-99</NDCCode>
<PackageDescription>1 KIT in 1 BOX (0026-3942-99) * 2.5 mL in 1 VIAL (0026-4942-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4942-01) </PackageDescription>
<NDC11Code>00026-3942-99</NDC11Code>
<ProductNDC>0026-3942</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Jivi</ProprietaryName>
<NonProprietaryName>Antihemophilic Factor (recombinant) Pegylated-aucl</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20180830</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125661</ApplicationNumber>
<LabelerName>Bayer HealthCare LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180830</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .</IndicationAndUsage>
<Description>JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins.</Description>
</NDC>
<NDC>
<NDCCode>0026-3944-25</NDCCode>
<PackageDescription>1 KIT in 1 BOX (0026-3944-25) * 2.5 mL in 1 VIAL (0026-4944-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4944-01) </PackageDescription>
<NDC11Code>00026-3944-25</NDC11Code>
<ProductNDC>0026-3944</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Jivi</ProprietaryName>
<NonProprietaryName>Antihemophilic Factor (recombinant) Pegylated-aucl</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20180830</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125661</ApplicationNumber>
<LabelerName>Bayer HealthCare LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180830</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .</IndicationAndUsage>
<Description>JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins.</Description>
</NDC>
<NDC>
<NDCCode>0026-3944-99</NDCCode>
<PackageDescription>1 KIT in 1 BOX (0026-3944-99) * 2.5 mL in 1 VIAL (0026-4944-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4944-01) </PackageDescription>
<NDC11Code>00026-3944-99</NDC11Code>
<ProductNDC>0026-3944</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Jivi</ProprietaryName>
<NonProprietaryName>Antihemophilic Factor (recombinant) Pegylated-aucl</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20180830</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125661</ApplicationNumber>
<LabelerName>Bayer HealthCare LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180830</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .</IndicationAndUsage>
<Description>JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins.</Description>
</NDC>
<NDC>
<NDCCode>0026-3946-25</NDCCode>
<PackageDescription>1 KIT in 1 BOX (0026-3946-25) * 2.5 mL in 1 VIAL (0026-4946-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4946-01) </PackageDescription>
<NDC11Code>00026-3946-25</NDC11Code>
<ProductNDC>0026-3946</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Jivi</ProprietaryName>
<NonProprietaryName>Antihemophilic Factor (recombinant) Pegylated-aucl</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20180830</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125661</ApplicationNumber>
<LabelerName>Bayer HealthCare LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180830</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .</IndicationAndUsage>
<Description>JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins.</Description>
</NDC>
<NDC>
<NDCCode>0026-3946-99</NDCCode>
<PackageDescription>1 KIT in 1 BOX (0026-3946-99) * 2.5 mL in 1 VIAL (0026-4946-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4946-01) </PackageDescription>
<NDC11Code>00026-3946-99</NDC11Code>
<ProductNDC>0026-3946</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Jivi</ProprietaryName>
<NonProprietaryName>Antihemophilic Factor (recombinant) Pegylated-aucl</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20180830</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125661</ApplicationNumber>
<LabelerName>Bayer HealthCare LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180830</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .</IndicationAndUsage>
<Description>JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins.</Description>
</NDC>
<NDC>
<NDCCode>0026-3948-25</NDCCode>
<PackageDescription>1 KIT in 1 BOX (0026-3948-25) * 2.5 mL in 1 VIAL (0026-4948-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4948-01) </PackageDescription>
<NDC11Code>00026-3948-25</NDC11Code>
<ProductNDC>0026-3948</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Jivi</ProprietaryName>
<NonProprietaryName>Antihemophilic Factor (recombinant) Pegylated-aucl</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20180830</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125661</ApplicationNumber>
<LabelerName>Bayer HealthCare LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180830</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .</IndicationAndUsage>
<Description>JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins.</Description>
</NDC>
<NDC>
<NDCCode>0026-3948-99</NDCCode>
<PackageDescription>1 KIT in 1 BOX (0026-3948-99) * 2.5 mL in 1 VIAL (0026-4948-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4948-01) </PackageDescription>
<NDC11Code>00026-3948-99</NDC11Code>
<ProductNDC>0026-3948</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Jivi</ProprietaryName>
<NonProprietaryName>Antihemophilic Factor (recombinant) Pegylated-aucl</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20180830</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125661</ApplicationNumber>
<LabelerName>Bayer HealthCare LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180830</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .</IndicationAndUsage>
<Description>JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins.</Description>
</NDC>
<NDC>
<NDCCode>0026-3950-50</NDCCode>
<PackageDescription>1 KIT in 1 BOX (0026-3950-50) * 5 mL in 1 VIAL (0026-4950-99) * 5 mL in 1 SYRINGE (0026-0426-05) * 5 mL in 1 VIAL, SINGLE-USE (0026-4950-01) * 5 mL in 1 SYRINGE (0026-0426-15) </PackageDescription>
<NDC11Code>00026-3950-50</NDC11Code>
<ProductNDC>0026-3950</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Jivi</ProprietaryName>
<NonProprietaryName>Antihemophilic Factor (recombinant) Pegylated-aucl</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20241202</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125661</ApplicationNumber>
<LabelerName>Bayer HealthCare LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .</IndicationAndUsage>
<Description>JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins.</Description>
</NDC>
<NDC>
<NDCCode>0026-3950-99</NDCCode>
<PackageDescription>1 KIT in 1 BOX (0026-3950-99) * 5 mL in 1 VIAL (0026-4950-99) * 5 mL in 1 SYRINGE (0026-0426-05) * 5 mL in 1 VIAL, SINGLE-USE (0026-4950-01) * 5 mL in 1 SYRINGE (0026-0426-15) </PackageDescription>
<NDC11Code>00026-3950-99</NDC11Code>
<ProductNDC>0026-3950</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Jivi</ProprietaryName>
<NonProprietaryName>Antihemophilic Factor (recombinant) Pegylated-aucl</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20241202</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125661</ApplicationNumber>
<LabelerName>Bayer HealthCare LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .</IndicationAndUsage>
<Description>JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins.</Description>
</NDC>
<NDC>
<NDCCode>0409-3374-02</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (0409-3374-02) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-USE (0409-3374-11) </PackageDescription>
<NDC11Code>00409-3374-02</NDC11Code>
<ProductNDC>0409-3374</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Piperacillin And Tazobactam</ProprietaryName>
<NonProprietaryName>Piperacillin And Tazobactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; PARENTERAL</RouteName>
<StartMarketingDate>20101021</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065363</ApplicationNumber>
<LabelerName>Hospira, Inc</LabelerName>
<SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
<StrengthNumber>2; .25</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-04-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101021</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1), 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2), 3 Skin and skin structure infections in adults (1.3), 4 Female pelvic infections in adults (1.4), 5 Community-acquired pneumonia in adults (1.5).</IndicationAndUsage>
<Description>Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine‑carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2‑carboxylate. The chemical formula is C23H26N5NaO7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1‑azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C10H11N4NaO5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is. Piperacillin and tazobactam for injection, USP, is a white to yellowish sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. Dilute solutions are colorless to yellowish. Each piperacillin and tazobactam for injection, USP 2.25 g single-dose ADD-Vantage® vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. Each vial contains 4.69 mEq (108 mg) of sodium. Each piperacillin and tazobactam for injection, USP 3.375 g single-dose ADD-Vantage® vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. Each vial contains 7.04 mEq (162 mg) of sodium. Each piperacillin and tazobactam for injection, USP 4.5 g single-dose ADD-Vantage® vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Each vial contains 9.39 mEq (216 mg) of sodium. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Meets USP Organic Impurities Procedure 3.</Description>
</NDC>
<NDC>
<NDCCode>0409-3378-13</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (0409-3378-13) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-USE (0409-3378-11) </PackageDescription>
<NDC11Code>00409-3378-13</NDC11Code>
<ProductNDC>0409-3378</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Piperacillin And Tazobactam</ProprietaryName>
<NonProprietaryName>Piperacillin And Tazobactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; PARENTERAL</RouteName>
<StartMarketingDate>20101021</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065363</ApplicationNumber>
<LabelerName>Hospira, Inc</LabelerName>
<SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
<StrengthNumber>3; .375</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-04-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101021</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1), 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2), 3 Skin and skin structure infections in adults (1.3), 4 Female pelvic infections in adults (1.4), 5 Community-acquired pneumonia in adults (1.5).</IndicationAndUsage>
<Description>Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine‑carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2‑carboxylate. The chemical formula is C23H26N5NaO7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1‑azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C10H11N4NaO5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is. Piperacillin and tazobactam for injection, USP, is a white to yellowish sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. Dilute solutions are colorless to yellowish. Each piperacillin and tazobactam for injection, USP 2.25 g single-dose ADD-Vantage® vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. Each vial contains 4.69 mEq (108 mg) of sodium. Each piperacillin and tazobactam for injection, USP 3.375 g single-dose ADD-Vantage® vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. Each vial contains 7.04 mEq (162 mg) of sodium. Each piperacillin and tazobactam for injection, USP 4.5 g single-dose ADD-Vantage® vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Each vial contains 9.39 mEq (216 mg) of sodium. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Meets USP Organic Impurities Procedure 3.</Description>
</NDC>
<NDC>
<NDCCode>0409-3379-04</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (0409-3379-04) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-USE (0409-3379-11) </PackageDescription>
<NDC11Code>00409-3379-04</NDC11Code>
<ProductNDC>0409-3379</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Piperacillin And Tazobactam</ProprietaryName>
<NonProprietaryName>Piperacillin And Tazobactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; PARENTERAL</RouteName>
<StartMarketingDate>20101021</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065363</ApplicationNumber>
<LabelerName>Hospira, Inc</LabelerName>
<SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
<StrengthNumber>4; .5</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-04-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101021</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1), 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2), 3 Skin and skin structure infections in adults (1.3), 4 Female pelvic infections in adults (1.4), 5 Community-acquired pneumonia in adults (1.5).</IndicationAndUsage>
<Description>Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine‑carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2‑carboxylate. The chemical formula is C23H26N5NaO7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1‑azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C10H11N4NaO5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is. Piperacillin and tazobactam for injection, USP, is a white to yellowish sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. Dilute solutions are colorless to yellowish. Each piperacillin and tazobactam for injection, USP 2.25 g single-dose ADD-Vantage® vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. Each vial contains 4.69 mEq (108 mg) of sodium. Each piperacillin and tazobactam for injection, USP 3.375 g single-dose ADD-Vantage® vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. Each vial contains 7.04 mEq (162 mg) of sodium. Each piperacillin and tazobactam for injection, USP 4.5 g single-dose ADD-Vantage® vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Each vial contains 9.39 mEq (216 mg) of sodium. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Meets USP Organic Impurities Procedure 3.</Description>
</NDC>
<NDC>
<NDCCode>0409-3383-02</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (0409-3383-02) / 10 mL in 1 VIAL, SINGLE-USE (0409-3383-11) </PackageDescription>
<NDC11Code>00409-3383-02</NDC11Code>
<ProductNDC>0409-3383</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Piperacillin And Tazobactam</ProprietaryName>
<NonProprietaryName>Piperacillin And Tazobactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; PARENTERAL</RouteName>
<StartMarketingDate>20101021</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065362</ApplicationNumber>
<LabelerName>Hospira, Inc</LabelerName>
<SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
<StrengthNumber>2; .25</StrengthNumber>
<StrengthUnit>g/10mL; g/10mL</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101021</StartMarketingDatePackage>
<EndMarketingDatePackage>20261231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1), 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2), 3 Skin and skin structure infections in adults (1.3), 4 Female pelvic infections in adults (1.4), 5 Community-acquired pneumonia in adults (1.5).</IndicationAndUsage>
<Description>Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine‑carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2‑carboxylate. The chemical formula is C23H26N5NaO7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1‑azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C10H11N4NaO5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is. Piperacillin and tazobactam for injection, USP, is a white to yellowish sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. Dilute solutions are colorless to yellowish. Each piperacillin and tazobactam for injection, USP 2.25 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. Each vial contains 4.69 mEq (108 mg) of sodium. Each piperacillin and tazobactam for injection, USP 3.375 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. Each vial contains 7.04 mEq (162 mg) of sodium. Each piperacillin and tazobactam for injection, USP 4.5 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Each vial contains 9.39 mEq (216 mg) of sodium. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Meets USP Organic Impurities Procedure 3.</Description>
</NDC>
<NDC>
<NDCCode>0409-3383-10</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (0409-3383-10) / 10 mL in 1 VIAL, SINGLE-USE (0409-3383-11) </PackageDescription>
<NDC11Code>00409-3383-10</NDC11Code>
<ProductNDC>0409-3383</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Piperacillin And Tazobactam</ProprietaryName>
<NonProprietaryName>Piperacillin And Tazobactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; PARENTERAL</RouteName>
<StartMarketingDate>20101021</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065362</ApplicationNumber>
<LabelerName>Hospira, Inc</LabelerName>
<SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
<StrengthNumber>2; .25</StrengthNumber>
<StrengthUnit>g/10mL; g/10mL</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250609</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1), 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2), 3 Skin and skin structure infections in adults (1.3), 4 Female pelvic infections in adults (1.4), 5 Community-acquired pneumonia in adults (1.5).</IndicationAndUsage>
<Description>Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine‑carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2‑carboxylate. The chemical formula is C23H26N5NaO7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1‑azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C10H11N4NaO5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is. Piperacillin and tazobactam for injection, USP, is a white to yellowish sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. Dilute solutions are colorless to yellowish. Each piperacillin and tazobactam for injection, USP 2.25 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. Each vial contains 4.69 mEq (108 mg) of sodium. Each piperacillin and tazobactam for injection, USP 3.375 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. Each vial contains 7.04 mEq (162 mg) of sodium. Each piperacillin and tazobactam for injection, USP 4.5 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Each vial contains 9.39 mEq (216 mg) of sodium. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Meets USP Organic Impurities Procedure 3.</Description>
</NDC>
<NDC>
<NDCCode>0409-3385-13</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (0409-3385-13) / 15 mL in 1 VIAL, SINGLE-USE (0409-3385-11) </PackageDescription>
<NDC11Code>00409-3385-13</NDC11Code>
<ProductNDC>0409-3385</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Piperacillin And Tazobactam</ProprietaryName>
<NonProprietaryName>Piperacillin And Tazobactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; PARENTERAL</RouteName>
<StartMarketingDate>20101021</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065362</ApplicationNumber>
<LabelerName>Hospira, Inc</LabelerName>
<SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
<StrengthNumber>3; .375</StrengthNumber>
<StrengthUnit>g/15mL; g/15mL</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-06-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101021</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Piperacillin and tazobactam for injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1), 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2), 3 Skin and skin structure infections in adults (1.3), 4 Female pelvic infections in adults (1.4), 5 Community-acquired pneumonia in adults (1.5).</IndicationAndUsage>
<Description>Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine‑carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2‑carboxylate. The chemical formula is C23H26N5NaO7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1‑azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C10H11N4NaO5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is. Piperacillin and tazobactam for injection, USP, is a white to yellowish sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. The product does not contain excipients or preservatives. Dilute solutions are colorless to yellowish. Each piperacillin and tazobactam for injection, USP 2.25 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 g of tazobactam. Each vial contains 4.69 mEq (108 mg) of sodium. Each piperacillin and tazobactam for injection, USP 3.375 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 g of tazobactam. Each vial contains 7.04 mEq (162 mg) of sodium. Each piperacillin and tazobactam for injection, USP 4.5 g single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 g of tazobactam. Each vial contains 9.39 mEq (216 mg) of sodium. Piperacillin and tazobactam for injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Meets USP Organic Impurities Procedure 3.</Description>
</NDC>
</NDCList>