{
"NDC": [
{
"NDCCode": "71872-7288-1",
"PackageDescription": "1 VIAL in 1 BAG (71872-7288-1) / 2 mL in 1 VIAL",
"NDC11Code": "71872-7288-01",
"ProductNDC": "71872-7288",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketorolac Tromethamine",
"NonProprietaryName": "Ketorolac Tromethamine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20190318",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204216",
"LabelerName": "Medical Purchasing Solutions, LLC",
"SubstanceName": "KETOROLAC TROMETHAMINE",
"StrengthNumber": "60",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2023-04-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220412",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks ketorolac tromethamine and other treatment options before deciding to use ketorolac. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Acute Pain in Adult Patients Ketorolac tromethamine is indicated for the short-term (≤5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with intravenous or intramuscular dosing of ketorolac tromethamine and oral ketorolac tromethamine is to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine injection and oral ketorolac tromethamine is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION, and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine therapy is not to exceed 5 days.",
"Description": "Ketorolac tromethamine Injection, USP is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl-2,3-dihydro-1 H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol (1:1), and the structural formula is presented in Figure 1 FIGURE 1. C 15H 13NO 3 C 4H 11NO 3 Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.40. Ketorolac Tromethamine Injection , USP is available for intravenous (IV) or intramuscular (IM) administration as: 15 mg in 1 mL (1.5%) and 30 mg in 1 mL (3%) in sterile solution; 60 mg in 2 mL (3%) of ketorolac tromethamine in sterile solution is available for intramuscular administration only. The solutions contain 10% (w/v) alcohol, USP, and 6.68 mg, 4.35 mg and 8.70 mg respectively, of sodium chloride in sterile water. The pH range is 6.9 to 7.9 and is adjusted with sodium hydroxide and/or hydrochloric acid. The sterile solutions are clear to slightly yellow in color."
},
{
"NDCCode": "0378-7288-53",
"PackageDescription": "3 POUCH in 1 CARTON (0378-7288-53) / 1 BLISTER PACK in 1 POUCH (0378-7288-85) / 1 KIT in 1 BLISTER PACK",
"NDC11Code": "00378-7288-53",
"ProductNDC": "0378-7288",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Norethindrone Acetate And Ethinyl Estradiol",
"NonProprietaryName": "Norethindrone Acetate And Ethinyl Estradiol",
"DosageFormName": "KIT",
"StartMarketingDate": "20191216",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202741",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"Status": "Active",
"LastUpdate": "2025-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191216",
"SamplePackage": "N",
"IndicationAndUsage": "Norethindrone acetate and ethinyl estradiol tablets and ferrous fumarate tablets are indicated for the prevention of pregnancy in women who elect to use oral contraceptives as a method of contraception. Oral contraceptives are highly effective. Table I lists the typical accidental pregnancy rates for users of combination oral contraceptives and other methods of contraception. The efficacy of these contraceptive methods, except sterilization, depends upon the reliability with which they are used. Correct and consistent use of methods can result in lower failure rates.",
"Description": "Norethindrone Acetate and Ethinyl Estradiol Tablets, USP and Ferrous Fumarate Tablets are a progestogen-estrogen combination. Norethindrone Acetate and Ethinyl Estradiol Tablets USP, 1.5 mg/0.03 mg and Ferrous Fumarate Tablets, 75 mg provide a continuous dosage regimen consisting of 21 oral contraceptive tablets and seven ferrous fumarate tablets. The ferrous fumarate tablets are present to facilitate ease of drug administration via a 28-day regimen, are non-hormonal, and do not serve any therapeutic purpose. Each blue tablet contains norethindrone acetate (19-Norpregn-4-en-20-yn-3-one, 17-(acetyloxy)-, (17α)), 1.5 mg; ethinyl estradiol (19-Norpregna-1,3,5(10)-trien-20-yne-3, 17-diol, (17α)-), 0.03 mg. Also contains compressible sugar, croscarmellose sodium, dl-α-tocopherol, FD & C Blue No. 1 Aluminum Lake, lactose anhydrous, lactose monohydrate, magnesium stearate, povidone K-25, sodium lauryl sulphate. The structural formulas are as follows. Each brown tablet contains colloidal silicon dioxide, croscarmellose sodium, ferrous fumarate, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone K-90."
},
{
"NDCCode": "0904-7288-61",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (0904-7288-61) / 1 TABLET in 1 BLISTER PACK",
"NDC11Code": "00904-7288-61",
"ProductNDC": "0904-7288",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Benztropine Mesylate",
"NonProprietaryName": "Benztropine Mesylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230711",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040715",
"LabelerName": "Major Pharmaceuticals",
"SubstanceName": "BENZTROPINE MESYLATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anticholinergic [EPC], Antihistamine [EPC], Cholinergic Antagonists [MoA], Histamine Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-01-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230711",
"SamplePackage": "N",
"IndicationAndUsage": "For use as an adjunct in the therapy of all forms of parkinsonism. Useful also in the control of extrapyramidal disorders (except tardive dyskinesia – see PRECAUTIONS) due to neuroleptic drugs (e.g., phenothiazines).",
"Description": "Benztropine mesylate is a synthetic compound containing structural features found in atropine and diphenhydramine. It is a crystalline white powder, very soluble in water, designated as 3α-(Diphenylmethoxy)-1αH, 5αH-tropane methanesulfonate, with the following structural formula. Each tablet, for oral administration, contains 0.5 mg, 1 mg or 2 mg of benztropine mesylate. Each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate, lactose monohydrate, magnesium stearate and microcrystalline cellulose."
},
{
"NDCCode": "11523-7288-1",
"PackageDescription": "237 mL in 1 BOTTLE, PLASTIC (11523-7288-1)",
"NDC11Code": "11523-7288-01",
"ProductNDC": "11523-7288",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Coppertone",
"ProprietaryNameSuffix": "Spf 4",
"NonProprietaryName": "Octinoxate And Octocrylene",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "19990521",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Bayer Healthcare LLC",
"SubstanceName": "OCTINOXATE; OCTOCRYLENE",
"StrengthNumber": "28.95; 19.3",
"StrengthUnit": "mg/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2017-12-20",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "50090-7288-0",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE (50090-7288-0) ",
"NDC11Code": "50090-7288-00",
"ProductNDC": "50090-7288",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ibuprofen",
"NonProprietaryName": "Ibuprofen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240523",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202413",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "IBUPROFEN",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2024-10-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241008",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of Ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals [see WARNINGS]. Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of Ibuprofen tablets in children have not been conducted.",
"Description": "Ibuprofen tablets, USP contain the active ingredient ibuprofen, which is (±) - 2 - (p - isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74-77°C and is very slightly soluble in water (<1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula is represented below. Ibuprofen, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, soidum starch glycoate, stearic acid, talc, titanium dioxide."
},
{
"NDCCode": "50090-7288-2",
"PackageDescription": "16 TABLET, FILM COATED in 1 BOTTLE (50090-7288-2) ",
"NDC11Code": "50090-7288-02",
"ProductNDC": "50090-7288",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ibuprofen",
"NonProprietaryName": "Ibuprofen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240523",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202413",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "IBUPROFEN",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2024-10-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241008",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of Ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals [see WARNINGS]. Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of Ibuprofen tablets in children have not been conducted.",
"Description": "Ibuprofen tablets, USP contain the active ingredient ibuprofen, which is (±) - 2 - (p - isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74-77°C and is very slightly soluble in water (<1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula is represented below. Ibuprofen, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, soidum starch glycoate, stearic acid, talc, titanium dioxide."
},
{
"NDCCode": "50090-7288-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (50090-7288-3) ",
"NDC11Code": "50090-7288-03",
"ProductNDC": "50090-7288",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ibuprofen",
"NonProprietaryName": "Ibuprofen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240523",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202413",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "IBUPROFEN",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2024-10-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241008",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of Ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals [see WARNINGS]. Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of Ibuprofen tablets in children have not been conducted.",
"Description": "Ibuprofen tablets, USP contain the active ingredient ibuprofen, which is (±) - 2 - (p - isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74-77°C and is very slightly soluble in water (<1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula is represented below. Ibuprofen, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, soidum starch glycoate, stearic acid, talc, titanium dioxide."
},
{
"NDCCode": "50090-7288-4",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (50090-7288-4) ",
"NDC11Code": "50090-7288-04",
"ProductNDC": "50090-7288",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ibuprofen",
"NonProprietaryName": "Ibuprofen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240523",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202413",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "IBUPROFEN",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2024-10-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241008",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of Ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals [see WARNINGS]. Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of Ibuprofen tablets in children have not been conducted.",
"Description": "Ibuprofen tablets, USP contain the active ingredient ibuprofen, which is (±) - 2 - (p - isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74-77°C and is very slightly soluble in water (<1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula is represented below. Ibuprofen, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, soidum starch glycoate, stearic acid, talc, titanium dioxide."
},
{
"NDCCode": "50090-7288-5",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (50090-7288-5) ",
"NDC11Code": "50090-7288-05",
"ProductNDC": "50090-7288",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ibuprofen",
"NonProprietaryName": "Ibuprofen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240523",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202413",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "IBUPROFEN",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2024-10-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241008",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of Ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals [see WARNINGS]. Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of Ibuprofen tablets in children have not been conducted.",
"Description": "Ibuprofen tablets, USP contain the active ingredient ibuprofen, which is (±) - 2 - (p - isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74-77°C and is very slightly soluble in water (<1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula is represented below. Ibuprofen, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, soidum starch glycoate, stearic acid, talc, titanium dioxide."
},
{
"NDCCode": "50090-7288-7",
"PackageDescription": "40 TABLET, FILM COATED in 1 BOTTLE (50090-7288-7) ",
"NDC11Code": "50090-7288-07",
"ProductNDC": "50090-7288",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ibuprofen",
"NonProprietaryName": "Ibuprofen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240523",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202413",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "IBUPROFEN",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2024-10-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241008",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of Ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals [see WARNINGS]. Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of Ibuprofen tablets in children have not been conducted.",
"Description": "Ibuprofen tablets, USP contain the active ingredient ibuprofen, which is (±) - 2 - (p - isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74-77°C and is very slightly soluble in water (<1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula is represented below. Ibuprofen, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, soidum starch glycoate, stearic acid, talc, titanium dioxide."
},
{
"NDCCode": "50090-7288-8",
"PackageDescription": "20 TABLET, FILM COATED in 1 BOTTLE (50090-7288-8) ",
"NDC11Code": "50090-7288-08",
"ProductNDC": "50090-7288",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ibuprofen",
"NonProprietaryName": "Ibuprofen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240523",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202413",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "IBUPROFEN",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2024-10-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241008",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of Ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals [see WARNINGS]. Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of Ibuprofen tablets in children have not been conducted.",
"Description": "Ibuprofen tablets, USP contain the active ingredient ibuprofen, which is (±) - 2 - (p - isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74-77°C and is very slightly soluble in water (<1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula is represented below. Ibuprofen, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, soidum starch glycoate, stearic acid, talc, titanium dioxide."
},
{
"NDCCode": "50090-7288-9",
"PackageDescription": "24 TABLET, FILM COATED in 1 BOTTLE (50090-7288-9) ",
"NDC11Code": "50090-7288-09",
"ProductNDC": "50090-7288",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ibuprofen",
"NonProprietaryName": "Ibuprofen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240523",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202413",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "IBUPROFEN",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2024-10-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241008",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of Ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals [see WARNINGS]. Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of Ibuprofen tablets in children have not been conducted.",
"Description": "Ibuprofen tablets, USP contain the active ingredient ibuprofen, which is (±) - 2 - (p - isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74-77°C and is very slightly soluble in water (<1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula is represented below. Ibuprofen, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, soidum starch glycoate, stearic acid, talc, titanium dioxide."
},
{
"NDCCode": "55154-7288-0",
"PackageDescription": "10 BLISTER PACK in 1 BAG (55154-7288-0) / 1 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "55154-7288-00",
"ProductNDC": "55154-7288",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Escitalopram",
"NonProprietaryName": "Escitalopram",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20141015",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090939",
"LabelerName": "Cardinal Health 107, LLC",
"SubstanceName": "ESCITALOPRAM OXALATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-05-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141015",
"SamplePackage": "N",
"IndicationAndUsage": "Escitalopram is a selective serotonin reuptake inhibitor (SSRI) indicated for the: treatment of major depressive disorder (MDD) in adults and pediatric patients 12 years of age and older (1) treatment of generalized anxiety disorder (GAD) in adults (1).",
"Description": "Escitalopram tablets contain escitalopram, a selective serotonin reuptake inhibitor (SSRI), present as escitalopram oxalate salt. Escitalopram is the pure S- enantiomer (single isomer) of the racemic bicyclic phthalane derivative citalopram. Escitalopram oxalate is designated S-(+)-1- [3-(dimethyl-amino)propyl]-1-(p-fluorophenyl)-5-phthalancarbonitrile oxalate with the following structural formula. The molecular formula is C20H 21FN2O C2H2O4 and the molecular weight is 414.40. Escitalopram oxalate, USP occurs as a fine, white to slightly-yellow powder and is freely soluble in methanol and dimethyl sulfoxide (DMSO), soluble in isotonic saline solution, sparingly soluble in water and ethanol, slightly soluble in ethyl acetate, and insoluble in heptane. Escitalopram tablets, USP are white to off-white, round, biconvex, film-coated tablets containing 6.38 mg, 12.75 mg and 25.55 mg escitalopram oxalate in strengths equivalent to 5 mg, 10 mg, and 20 mg, respectively, of escitalopram base. The 10 and 20 mg tablets are scored. The tablets also contain the following inactive ingredients: cellulose microcrystalline, colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, povidone and talc. The film coating contains hypromellose, polyethylene glycol 400 and titanium dioxide. Meets USP Dissolution Test 2."
},
{
"NDCCode": "68788-7288-1",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (68788-7288-1) ",
"NDC11Code": "68788-7288-01",
"ProductNDC": "68788-7288",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gabapentin",
"NonProprietaryName": "Gabapentin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203244",
"LabelerName": "Preferred Pharmaceuticals, Inc.",
"SubstanceName": "GABAPENTIN",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2022-06-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20200601",
"SamplePackage": "N"
},
{
"NDCCode": "68788-7288-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (68788-7288-3) ",
"NDC11Code": "68788-7288-03",
"ProductNDC": "68788-7288",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gabapentin",
"NonProprietaryName": "Gabapentin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203244",
"LabelerName": "Preferred Pharmaceuticals, Inc.",
"SubstanceName": "GABAPENTIN",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2022-06-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20200601",
"SamplePackage": "N"
},
{
"NDCCode": "68788-7288-6",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (68788-7288-6) ",
"NDC11Code": "68788-7288-06",
"ProductNDC": "68788-7288",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gabapentin",
"NonProprietaryName": "Gabapentin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203244",
"LabelerName": "Preferred Pharmaceuticals, Inc.",
"SubstanceName": "GABAPENTIN",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2022-06-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20200601",
"SamplePackage": "N"
},
{
"NDCCode": "68788-7288-8",
"PackageDescription": "120 TABLET, FILM COATED in 1 BOTTLE (68788-7288-8) ",
"NDC11Code": "68788-7288-08",
"ProductNDC": "68788-7288",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gabapentin",
"NonProprietaryName": "Gabapentin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203244",
"LabelerName": "Preferred Pharmaceuticals, Inc.",
"SubstanceName": "GABAPENTIN",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2022-06-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20200601",
"SamplePackage": "N"
},
{
"NDCCode": "68788-7288-9",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (68788-7288-9) ",
"NDC11Code": "68788-7288-09",
"ProductNDC": "68788-7288",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gabapentin",
"NonProprietaryName": "Gabapentin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203244",
"LabelerName": "Preferred Pharmaceuticals, Inc.",
"SubstanceName": "GABAPENTIN",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2022-06-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20200601",
"SamplePackage": "N"
},
{
"NDCCode": "71872-7000-1",
"PackageDescription": "1 VIAL in 1 BAG (71872-7000-1) / 3 mL in 1 VIAL",
"NDC11Code": "71872-7000-01",
"ProductNDC": "71872-7000",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amiodarone Hydrochloride",
"NonProprietaryName": "Amiodarone Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20080225",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077234",
"LabelerName": "Medical Purchasing Solutions, LLC",
"SubstanceName": "AMIODARONE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antiarrhythmic [EPC], Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-06-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180228",
"SamplePackage": "N",
"IndicationAndUsage": "Amiodarone Hydrochloride Injection is indicated for initiation of treatment and prophylaxis of frequently recurring ventricular fibrillation (VF) and hemodynamically unstable ventricular tachycardia (VT) in patients refractory to other therapy. Amiodarone Hydrochloride Injection also can be used to treat patients with VT/VF for whom oral amiodarone is indicated, but who are unable to take oral medication. During or after treatment with Amiodarone Hydrochloride Injection, patients may be transferred to oral amiodarone therapy [see Dosage and Administration ( 2)] . Use Amiodarone Hydrochloride Injection for acute treatment until the patient's ventricular arrhythmias are stabilized. Most patients will require this therapy for 48 to 96 hours, but Amiodarone Hydrochloride Injection may be safely administered for longer periods if necessary.",
"Description": "Amiodarone Hydrochloride Injection contains Amiodarone Hydrochloride (C 25H 29I 2NO 3HCl), a class III antiarrhythmic drug. Amiodarone Hydrochloride is (2-butyl-3-benzo-furanyl)[4-[2-(diethylamino)ethoxy]-3,5-diiodophenyl]methanone hydrochloride. Amiodarone Hydrochloride has the following structural formula. Amiodarone Hydrochloride is a white to slightly yellow crystalline powder, and is very slightly soluble in water. It has a molecular weight of 681.78 and contains 37.3% iodine by weight. Amiodarone Hydrochloride Injection is a sterile clear, pale-yellow micellar solution visually free from particulates. Each milliliter of the amiodarone formulation contains 50 mg of amiodarone hydrochloride, 20.2 mg of benzyl alcohol, 100 mg of polysorbate 80, and water for injection. Amiodarone Hydrochloride Injection contains polysorbate 80, which is known to leach di-(2-ethylhexyl)phthalate (DEHP) from polyvinylchloride (PVC) [(see Dosage and Administration ( 2)] ."
},
{
"NDCCode": "71872-7001-1",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 BAG (71872-7001-1) / 1 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "71872-7001-01",
"ProductNDC": "71872-7001",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atropine Sulfate",
"NonProprietaryName": "Atropine Sulfate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19921101",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Medical Purchasing Solutions, LLC",
"SubstanceName": "ATROPINE SULFATE",
"StrengthNumber": ".4",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-06-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20180226",
"SamplePackage": "N",
"IndicationAndUsage": "In the treatment of parkinsonism. Rigidity and tremor relieved by the apparently selective depressant action. In the gastrointestinal tract to relieve pylorospasm, hypertonicity of the small intestine and the hypermotility of the colon. To relieve hypertonicity of the uterine muscle. To relax the spasm of biliary and uretered colic and bronchial spasm. To diminish the tone of the detrusor muscle of the urinary bladder in the treatment of urinary tract disorders. To control the crying and laughing episodes in patients with brain lesions. In cases of closed head injuries which cause acetylcholine to be released or to be present in cerebrospinal fluid which in turn causes abnormal EEG patterns, stupor and neurological signs. In the management of peptic ulcer. In anesthesia to control excessive salivation and bronchial secretions. To control rhinorrhea of acute rhinitis or hay fever. As an antidote for pilocarpine, physostigmine, isoflurophate, choline esters, certain species of Aminata and in cases of anticholinesterase insecticide poisoning. In poisoning by the organic phosphate cholinesterase inhibitors found in certain insecticides and by chemical warfare “nerve gases”, large doses of atropine relieve the muscarine-like symptoms and some of the central-nervous-system manifestations. Adults suspected of contact with organic phosphorus insecticides of the parathion type should be given atropine sulfate, 0.8 mg, intramuscularly. If an atropine effect is not apparent within thirty minutes or if definite symptoms of the poisoning occur (nausea, vomiting, diarrhea, pupillary constriction, pulmonary edema, fasciculations of eyelids and tongue, jerky ocular movements, and excessive sweating, salivation, and bronchial secretion), atropine sulfate, 2 mg, should be given intramuscularly at hourly intervals until signs of atropinization are observed. Up to two or three times this dose (4 to 6 mg) may be required in severe cases. Removing contaminated clothing, washing the skin, and commencing artificial respiration and supportive therapy are also indicated.",
"Description": "Atropine Sulfate Injection, USP is a sterile, isotonic solution of Atropine Sulfate in Water for Injection q.s. Sodium Chloride added for isotonicity. pH adjusted with Sulfuric Acid. Preservative free. Atropine is a white crystalline alkaloid which may be extracted from belladonna root and hyoscyamine or may be produced synthetically. It is used in the form of atropine sulfate because this compound has much greater solubility in water. The structural formula of Atropine is as follows."
},
{
"NDCCode": "71872-7002-1",
"PackageDescription": "10 CARTON in 1 BAG (71872-7002-1) > 1 SYRINGE, PLASTIC in 1 CARTON > 10 mL in 1 SYRINGE, PLASTIC",
"NDC11Code": "71872-7002-01",
"ProductNDC": "71872-7002",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atropine Sulfate",
"NonProprietaryName": "Atropine Sulfate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "ENDOTRACHEAL; INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20060119",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021146",
"LabelerName": "Medical Purchasing Solutions, LLC",
"SubstanceName": "ATROPINE SULFATE",
"StrengthNumber": ".1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2022-10-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180228",
"SamplePackage": "N",
"IndicationAndUsage": "Atropine Sulfate Injection, USP, is indicated for temporary blockade of severe or life threatening muscarinic effects, e.g., as an antisialagogue, an antivagal agent, an antidote for organophosphorus or muscarinic mushroom poisoning, and to treat bradyasystolic cardiac arrest.",
"Description": "Atropine Sulfate Injection, USP is a sterile, nonpyrogenic isotonic solution of atropine sulfate monohydrate in water for injection with sodium chloride sufficient to render the solution isotonic. It is administered parenterally by subcutaneous, intramuscular or intravenous injection. Each milliliter (mL) contains 0.1 mg (adult strength) or 0.05 mg (pediatric strength) of atropine sulfate monohydrate equivalent to 0.083 mg (adult strength) or 0.042 mg (pediatric strength) of atropine, and sodium chloride, 9 mg. May contain sodium hydroxide and/or sulfuric acid for pH adjustment 0.308 mOsmol/mL (calc.). pH (3.0 to 6.5). Sodium chloride added to render the solution isotonic for injection of the active ingredient is present in amounts insufficient to affect serum electrolyte balance of sodium (Na +) and chloride (Cl -) ions. The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended for use only as a single-dose injection. When smaller doses are required the unused portion should be discarded. Atropine Sulfate, USP is chemically designated 1α H, 5α H-Tropan-3-α-ol (±)-tropate (ester), sulfate (2:1) (salt) monohydrate, (C 17H 23NO 3) 2 ∙ H 2SO 4 ∙ H 2O, colorless crystals or white crystalline powder very soluble in water. It has the following structural formula:. Atropine, a naturally occurring belladonna alkaloid, is a racemic mixture of equal parts of d- and 1-hyocyamine, whose activity is due almost entirely to the levo isomer of the drug. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. The syringe is molded from a specially formulated polypropylene. Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the syringe material."
},
{
"NDCCode": "71872-7003-1",
"PackageDescription": "1 CARTON in 1 BAG (71872-7003-1) > 1 SYRINGE, PLASTIC in 1 CARTON > 50 mL in 1 SYRINGE, PLASTIC",
"NDC11Code": "71872-7003-01",
"ProductNDC": "71872-7003",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20051202",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019445",
"LabelerName": "Medical Purchasing Solutions, LLC",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "25",
"StrengthUnit": "g/50mL",
"Status": "Active",
"LastUpdate": "2022-10-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180228",
"SamplePackage": "N",
"IndicationAndUsage": "50% Dextrose Injection is indicated in the treatment of insulin hypoglycemia (hyperinsulinemia or insulin shock) to restore blood glucose levels. The solution is also indicated, after dilution, for intravenous infusion as a source of carbohydrate calories in patients whose oral intake is restricted or inadequate to maintain nutritional requirements. Slow infusion of hypertonic solutions is essential to insure proper utilization of dextrose and avoid production of hyperglycemia.",
"Description": "50% Dextrose Injection, USP is a sterile, nonpyrogenic, hypertonic solution of dextrose in water for injection for intravenous injection as a fluid and nutrient replenisher. Each mL of fluid contains 0.5 g dextrose, hydrous which delivers 3.4 kcal/gram. The solution has an osmolarity of 2.53 mOsmol/mL (calc.), a pH of 3.2 to 6.5 and may contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended only for use as a single-dose injection. When smaller doses are required, the unused portion should be discarded with the entire unit. Dextrose, USP is chemically designated C 6H 12O 6 H 2O (D-glucose monohydrate), a hexose sugar freely soluble in water. Dextrose, hydrous has the following structural formula. Water for Injection, USP is chemically designated H 2O. The syringe is molded from a specially formulated polypropylene. Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the syringe material."
},
{
"NDCCode": "71872-7005-1",
"PackageDescription": "1 VIAL in 1 BAG (71872-7005-1) / 1 mL in 1 VIAL",
"NDC11Code": "71872-7005-01",
"ProductNDC": "71872-7005",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diphenhydramine Hydrochloride",
"NonProprietaryName": "Diphenhydramine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "19721127",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA080817",
"LabelerName": "Medical Purchasing Solutions, LLC",
"SubstanceName": "DIPHENHYDRAMINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2023-04-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180228",
"SamplePackage": "N",
"IndicationAndUsage": "Diphenhydramine Hydrochloride Injection is effective in adults and pediatric patients, other than premature infants and neonates, for the following conditions when the oral form is impractical.",
"Description": "Diphenhydramine Hydrochloride Injection is a sterile, nonpyrogenic solution for intravenous or deep intramuscular use as an antihistaminic agent. Each mL contains diphenhydramine hydrochloride 50 mg and benzethonium chloride 100 mcg in Water for Injection. pH 4.0-6.5; sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The chemical name of diphenhydramine hydrochloride is 2-(Diphenylmethoxy)-N,N-dimethylethylamine hydrochloride. The structural formula is as follows. C 17H 21NO HCl MW 291.82. Diphenhydramine hydrochloride occurs as a white crystalline powder and is freely soluble in water and alcohol."
},
{
"NDCCode": "71872-7007-1",
"PackageDescription": "1 CASE in 1 BAG (71872-7007-1) > 1 SYRINGE, GLASS in 1 CASE > .15 mL in 1 SYRINGE, GLASS",
"NDC11Code": "71872-7007-01",
"ProductNDC": "71872-7007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Epinephrine",
"NonProprietaryName": "Epinephrine",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20100401",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020800",
"LabelerName": "Medical Purchasing Solutions, LLC",
"SubstanceName": "EPINEPHRINE",
"StrengthNumber": ".15",
"StrengthUnit": "mg/.15mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20180228",
"SamplePackage": "N"
},
{
"NDCCode": "71872-7008-1",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 BAG (71872-7008-1) > 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "71872-7008-01",
"ProductNDC": "71872-7008",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Flumazenil",
"NonProprietaryName": "Flumazenil",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20070101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078527",
"LabelerName": "Medical Purchasing Solutions, LLC",
"SubstanceName": "FLUMAZENIL",
"StrengthNumber": ".1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2022-10-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180228",
"SamplePackage": "N",
"IndicationAndUsage": "Flumazenil Injection, USP is indicated for the complete or partial reversal of the sedative effects of benzodiazepines in cases where general anesthesia has been induced and/or maintained with benzodiazepines, where sedation has been produced with benzodiazepines for diagnostic and therapeutic procedures, and for the management of benzodiazepine overdose.",
"Description": "Flumazenil Injection, USP is a benzodiazepine receptor antagonist. Chemically, flumazenil is ethyl 8-fluoro-5,6-dihydro-5-methyl-6-oxo-4H-imidazo[1,5-a](1,4) benzodiazepine-3-carboxylate. Flumazenil has an imidazobenzodiazepine structure, a calculated molecular weight of 303.3, and the following structural formula. Flumazenil is a white to off-white crystalline compound with an octanol: buffer partition coefficient of 14 to 1 at pH 7.4. It is insoluble in water but slightly soluble in acidic aqueous solutions. Flumazenil injection is available as a sterile parenteral dosage form for intravenous administration. Each mL contains 0.1 mg of flumazenil compounded with 1.8 mg of methylparaben, 0.2 mg of propylparaben, 0.9% sodium chloride, 0.01% edetate disodium, and 0.01% acetic acid; the pH is adjusted to approximately 4 with hydrochloric acid and/or, if necessary, sodium hydroxide."
},
{
"NDCCode": "71872-7009-1",
"PackageDescription": "1 VIAL in 1 BAG (71872-7009-1) / 1 mL in 1 VIAL",
"NDC11Code": "71872-7009-01",
"ProductNDC": "71872-7009",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Naloxone Hydrochloride",
"NonProprietaryName": "Nalxone Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19860924",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA070299",
"LabelerName": "Medical Purchasing Solutions, LLC",
"SubstanceName": "NALOXONE HYDROCHLORIDE",
"StrengthNumber": ".4",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Opioid Antagonist [EPC], Opioid Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2023-04-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190506",
"SamplePackage": "N",
"IndicationAndUsage": "Naloxone Hydrochloride Injection, USP is indicated for the complete or partial reversal of opioid depression, including respiratory depression, induced by natural and synthetic opioids, including propoxyphene, methadone, and certain mixed agonist-antagonist analgesics: nalbuphine, pentazocine, butorphanol, and cyclazocine. Naloxone Hydrochloride Injection, USP is also indicated for diagnosis of suspected or known acute opioid overdosage. Naloxone Hydrochloride Injection, USP may be useful as an adjunctive agent to increase blood pressure in the management of septic shock (see CLINICAL PHARMACOLOGY; Adjunctive Use in Septic Shock).",
"Description": "Naloxone Hydrochloride Injection, USP, an opioid antagonist, is a synthetic congener of oxymorphone. In structure it differs from oxymorphone in that the methyl group on the nitrogen atom is replaced by an allyl group. Naloxone hydrochloride occurs as a white to slightly off-white powder, and is soluble in water, in dilute acids, and in strong alkali; slightly soluble in alcohol; practically insoluble in ether and in chloroform. Naloxone Hydrochloride Injection, USP is available as a sterile solution for intravenous, intramuscular and subcutaneous administration in the concentration 0.4 mg of naloxone hydrochloride per mL. pH is adjusted to 3.5 ± 0.5 with hydrochloric acid. The 0.4 mg/mL vial contains 8.6 mg/mL of sodium chloride and 2 mg/mL of methylparaben and propylparaben as preservatives in a ratio of 9:1."
},
{
"NDCCode": "71872-7010-1",
"PackageDescription": "1 BOTTLE in 1 BAG (71872-7010-1) / 25 TABLET in 1 BOTTLE",
"NDC11Code": "71872-7010-01",
"ProductNDC": "71872-7010",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nitroglycerin",
"NonProprietaryName": "Nitroglycerin",
"DosageFormName": "TABLET",
"RouteName": "SUBLINGUAL",
"StartMarketingDate": "20160829",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208191",
"LabelerName": "Medical Purchasing Solutions, LLC",
"SubstanceName": "NITROGLYCERIN",
"StrengthNumber": ".4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2023-06-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180228",
"SamplePackage": "N",
"IndicationAndUsage": "Nitroglycerin sublingual tablets are indicated for the acute relief of an attack or acute prophylaxis of angina pectoris due to coronary artery disease.",
"Description": "Nitroglycerin is a stabilized sublingual compressed nitroglycerin tablet that contains 0.3 mg, 0.4 mg, or 0.6 mg nitroglycerin USP; as well as calcium stearate powder, colloidal silicon dioxide, hydrogenated vegetable oil, lactose monohydrate, and pregelatinized starch. Nitroglycerin, an organic nitrate, is a vasodilating agent. The chemical name for nitroglycerin is 1, 2, 3 propanetriol trinitrate and the chemical structure is:. Molecular weight: 227.09."
},
{
"NDCCode": "71872-7012-1",
"PackageDescription": "10 VIAL in 1 BAG (71872-7012-1) / 20 mL in 1 VIAL",
"NDC11Code": "71872-7012-01",
"ProductNDC": "71872-7012",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glycopyrrolate",
"NonProprietaryName": "Glycopyrrolate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20170626",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207639",
"LabelerName": "Medical Purchasing Solutions, LLC",
"SubstanceName": "GLYCOPYRROLATE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2023-06-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180228",
"SamplePackage": "N",
"IndicationAndUsage": "In Anesthesia:. Glycopyrrolate Injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, Glycopyrrolate Injection may be used intraoperatively to counteract surgically or drug - induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants. In Peptic Ulcer: For use in adults as adjunctive therapy for the treatment of peptic ulcer when rapid anticholinergic effect is desired or when oral medication is not tolerated.",
"Description": "Glycopyrrolate Injection is a synthetic anticholinergic agent. Each 1 mL contains. Glycopyrrolate, USP 0.2 mg. Water for Injection, USP q.s. Benzyl Alcohol, NF 0.9 % (preservative). pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name. 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C 19H 28BrNO 3 and the molecular weight is 398.33. Its structural formula is as follows. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection is a clear, colorless, sterile liquid; pH 2.0 – 3.0. The partition coefficient of glycopyrrolate in a n-octanol /water system is 0.304 (log 10 P= -1.52) at ambient room temperature (24 C)."
},
{
"NDCCode": "71872-7013-1",
"PackageDescription": "1 VIAL in 1 BAG (71872-7013-1) / 20 mL in 1 VIAL",
"NDC11Code": "71872-7013-01",
"ProductNDC": "71872-7013",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glycopyrrolate",
"NonProprietaryName": "Glycopyrrolate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20110921",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090963",
"LabelerName": "Medical Purchasing Solutions, LLC",
"SubstanceName": "GLYCOPYRROLATE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2023-06-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181205",
"SamplePackage": "N",
"IndicationAndUsage": "Glycopyrrolate Injection, USP is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, Glycopyrrolate Injection, USP may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants.",
"Description": "Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains: Glycopyrrolate, USP 0.2 mg Water for Injection, USP q.s. Benzyl Alcohol, NF 0.9% (preservative) pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C 19H 28BrNO 3 and the molecular weight is 398.33. Its structural formula is as follows. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection, USP is a clear, colorless, sterile liquid; pH 2.0 – 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log 10 P= -1.52) at ambient room temperature (24°C)."
},
{
"NDCCode": "71872-7014-1",
"PackageDescription": "1 VIAL in 1 BAG (71872-7014-1) / 1 mL in 1 VIAL",
"NDC11Code": "71872-7014-01",
"ProductNDC": "71872-7014",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vasostrict",
"NonProprietaryName": "Vasopressin",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20141112",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA204485",
"LabelerName": "Medical Purchasin Solutions, LLC",
"SubstanceName": "VASOPRESSIN, UNSPECIFIED",
"StrengthNumber": "20",
"StrengthUnit": "[USP'U]/mL",
"Status": "Active",
"LastUpdate": "2023-06-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180228",
"SamplePackage": "N",
"IndicationAndUsage": "Vasostrict ® is indicated to increase blood pressure in adults with vasodilatory shock (e.g., post-cardiotomy or sepsis) who remain hypotensive despite fluids and catecholamines.",
"Description": "Vasopressin is a polypeptide hormone that causes contraction of vascular and other smooth muscles and antidiuresis. Vasostrict ® is a sterile, aqueous solution of synthetic arginine vasopressin for intravenous administration. The 1 mL solution contains vasopressin 20 units/mL, Water for Injection, USP, and sodium acetate buffer adjusted to a pH of 3.8. The 10 mL solution contains vasopressin 20 units/mL, chlorobutanol, NF 0.5% as a preservative, and Water for Injection, USP and, sodium acetate buffer adjusted to a pH of 3.8. The chemical name of vasopressin is Cyclo (1-6) L-Cysteinyl-L-Tyrosyl-L-Phenylalanyl-L-Glutaminyl-L-Asparaginyl-L-Cysteinyl-L-Prolyl-L-Arginyl-L-Glycinamide. It is a white to off-white amorphous powder, freely soluble in water. The structural formula is. Molecular Formula: C 46H 65N 15O 12S 2 Molecular Weight: 1084.23. One mg is equivalent to 530 units."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>71872-7288-1</NDCCode>
<PackageDescription>1 VIAL in 1 BAG (71872-7288-1) / 2 mL in 1 VIAL</PackageDescription>
<NDC11Code>71872-7288-01</NDC11Code>
<ProductNDC>71872-7288</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
<NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20190318</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204216</ApplicationNumber>
<LabelerName>Medical Purchasing Solutions, LLC</LabelerName>
<SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-04-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220412</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks ketorolac tromethamine and other treatment options before deciding to use ketorolac. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Acute Pain in Adult Patients Ketorolac tromethamine is indicated for the short-term (≤5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with intravenous or intramuscular dosing of ketorolac tromethamine and oral ketorolac tromethamine is to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine injection and oral ketorolac tromethamine is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION, and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine therapy is not to exceed 5 days.</IndicationAndUsage>
<Description>Ketorolac tromethamine Injection, USP is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl-2,3-dihydro-1 H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol (1:1), and the structural formula is presented in Figure 1 FIGURE 1. C 15H 13NO 3 C 4H 11NO 3 Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.40. Ketorolac Tromethamine Injection , USP is available for intravenous (IV) or intramuscular (IM) administration as: 15 mg in 1 mL (1.5%) and 30 mg in 1 mL (3%) in sterile solution; 60 mg in 2 mL (3%) of ketorolac tromethamine in sterile solution is available for intramuscular administration only. The solutions contain 10% (w/v) alcohol, USP, and 6.68 mg, 4.35 mg and 8.70 mg respectively, of sodium chloride in sterile water. The pH range is 6.9 to 7.9 and is adjusted with sodium hydroxide and/or hydrochloric acid. The sterile solutions are clear to slightly yellow in color.</Description>
</NDC>
<NDC>
<NDCCode>0378-7288-53</NDCCode>
<PackageDescription>3 POUCH in 1 CARTON (0378-7288-53) / 1 BLISTER PACK in 1 POUCH (0378-7288-85) / 1 KIT in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00378-7288-53</NDC11Code>
<ProductNDC>0378-7288</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Norethindrone Acetate And Ethinyl Estradiol</ProprietaryName>
<NonProprietaryName>Norethindrone Acetate And Ethinyl Estradiol</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20191216</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202741</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191216</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Norethindrone acetate and ethinyl estradiol tablets and ferrous fumarate tablets are indicated for the prevention of pregnancy in women who elect to use oral contraceptives as a method of contraception. Oral contraceptives are highly effective. Table I lists the typical accidental pregnancy rates for users of combination oral contraceptives and other methods of contraception. The efficacy of these contraceptive methods, except sterilization, depends upon the reliability with which they are used. Correct and consistent use of methods can result in lower failure rates.</IndicationAndUsage>
<Description>Norethindrone Acetate and Ethinyl Estradiol Tablets, USP and Ferrous Fumarate Tablets are a progestogen-estrogen combination. Norethindrone Acetate and Ethinyl Estradiol Tablets USP, 1.5 mg/0.03 mg and Ferrous Fumarate Tablets, 75 mg provide a continuous dosage regimen consisting of 21 oral contraceptive tablets and seven ferrous fumarate tablets. The ferrous fumarate tablets are present to facilitate ease of drug administration via a 28-day regimen, are non-hormonal, and do not serve any therapeutic purpose. Each blue tablet contains norethindrone acetate (19-Norpregn-4-en-20-yn-3-one, 17-(acetyloxy)-, (17α)), 1.5 mg; ethinyl estradiol (19-Norpregna-1,3,5(10)-trien-20-yne-3, 17-diol, (17α)-), 0.03 mg. Also contains compressible sugar, croscarmellose sodium, dl-α-tocopherol, FD & C Blue No. 1 Aluminum Lake, lactose anhydrous, lactose monohydrate, magnesium stearate, povidone K-25, sodium lauryl sulphate. The structural formulas are as follows. Each brown tablet contains colloidal silicon dioxide, croscarmellose sodium, ferrous fumarate, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone K-90.</Description>
</NDC>
<NDC>
<NDCCode>0904-7288-61</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (0904-7288-61) / 1 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00904-7288-61</NDC11Code>
<ProductNDC>0904-7288</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Benztropine Mesylate</ProprietaryName>
<NonProprietaryName>Benztropine Mesylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230711</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040715</ApplicationNumber>
<LabelerName>Major Pharmaceuticals</LabelerName>
<SubstanceName>BENZTROPINE MESYLATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Antihistamine [EPC], Cholinergic Antagonists [MoA], Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230711</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For use as an adjunct in the therapy of all forms of parkinsonism. Useful also in the control of extrapyramidal disorders (except tardive dyskinesia – see PRECAUTIONS) due to neuroleptic drugs (e.g., phenothiazines).</IndicationAndUsage>
<Description>Benztropine mesylate is a synthetic compound containing structural features found in atropine and diphenhydramine. It is a crystalline white powder, very soluble in water, designated as 3α-(Diphenylmethoxy)-1αH, 5αH-tropane methanesulfonate, with the following structural formula. Each tablet, for oral administration, contains 0.5 mg, 1 mg or 2 mg of benztropine mesylate. Each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate, lactose monohydrate, magnesium stearate and microcrystalline cellulose.</Description>
</NDC>
<NDC>
<NDCCode>11523-7288-1</NDCCode>
<PackageDescription>237 mL in 1 BOTTLE, PLASTIC (11523-7288-1)</PackageDescription>
<NDC11Code>11523-7288-01</NDC11Code>
<ProductNDC>11523-7288</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Coppertone</ProprietaryName>
<ProprietaryNameSuffix>Spf 4</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate And Octocrylene</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19990521</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Bayer Healthcare LLC</LabelerName>
<SubstanceName>OCTINOXATE; OCTOCRYLENE</SubstanceName>
<StrengthNumber>28.95; 19.3</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-12-20</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>50090-7288-0</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE (50090-7288-0) </PackageDescription>
<NDC11Code>50090-7288-00</NDC11Code>
<ProductNDC>50090-7288</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ibuprofen</ProprietaryName>
<NonProprietaryName>Ibuprofen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240523</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202413</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>IBUPROFEN</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241008</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of Ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals [see WARNINGS]. Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of Ibuprofen tablets in children have not been conducted.</IndicationAndUsage>
<Description>Ibuprofen tablets, USP contain the active ingredient ibuprofen, which is (±) - 2 - (p - isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74-77°C and is very slightly soluble in water (<1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula is represented below. Ibuprofen, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, soidum starch glycoate, stearic acid, talc, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>50090-7288-2</NDCCode>
<PackageDescription>16 TABLET, FILM COATED in 1 BOTTLE (50090-7288-2) </PackageDescription>
<NDC11Code>50090-7288-02</NDC11Code>
<ProductNDC>50090-7288</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ibuprofen</ProprietaryName>
<NonProprietaryName>Ibuprofen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240523</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202413</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>IBUPROFEN</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241008</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of Ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals [see WARNINGS]. Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of Ibuprofen tablets in children have not been conducted.</IndicationAndUsage>
<Description>Ibuprofen tablets, USP contain the active ingredient ibuprofen, which is (±) - 2 - (p - isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74-77°C and is very slightly soluble in water (<1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula is represented below. Ibuprofen, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, soidum starch glycoate, stearic acid, talc, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>50090-7288-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (50090-7288-3) </PackageDescription>
<NDC11Code>50090-7288-03</NDC11Code>
<ProductNDC>50090-7288</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ibuprofen</ProprietaryName>
<NonProprietaryName>Ibuprofen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240523</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202413</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>IBUPROFEN</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241008</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of Ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals [see WARNINGS]. Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of Ibuprofen tablets in children have not been conducted.</IndicationAndUsage>
<Description>Ibuprofen tablets, USP contain the active ingredient ibuprofen, which is (±) - 2 - (p - isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74-77°C and is very slightly soluble in water (<1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula is represented below. Ibuprofen, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, soidum starch glycoate, stearic acid, talc, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>50090-7288-4</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (50090-7288-4) </PackageDescription>
<NDC11Code>50090-7288-04</NDC11Code>
<ProductNDC>50090-7288</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ibuprofen</ProprietaryName>
<NonProprietaryName>Ibuprofen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240523</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202413</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>IBUPROFEN</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241008</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of Ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals [see WARNINGS]. Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of Ibuprofen tablets in children have not been conducted.</IndicationAndUsage>
<Description>Ibuprofen tablets, USP contain the active ingredient ibuprofen, which is (±) - 2 - (p - isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74-77°C and is very slightly soluble in water (<1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula is represented below. Ibuprofen, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, soidum starch glycoate, stearic acid, talc, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>50090-7288-5</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (50090-7288-5) </PackageDescription>
<NDC11Code>50090-7288-05</NDC11Code>
<ProductNDC>50090-7288</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ibuprofen</ProprietaryName>
<NonProprietaryName>Ibuprofen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240523</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202413</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>IBUPROFEN</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241008</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of Ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals [see WARNINGS]. Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of Ibuprofen tablets in children have not been conducted.</IndicationAndUsage>
<Description>Ibuprofen tablets, USP contain the active ingredient ibuprofen, which is (±) - 2 - (p - isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74-77°C and is very slightly soluble in water (<1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula is represented below. Ibuprofen, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, soidum starch glycoate, stearic acid, talc, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>50090-7288-7</NDCCode>
<PackageDescription>40 TABLET, FILM COATED in 1 BOTTLE (50090-7288-7) </PackageDescription>
<NDC11Code>50090-7288-07</NDC11Code>
<ProductNDC>50090-7288</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ibuprofen</ProprietaryName>
<NonProprietaryName>Ibuprofen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240523</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202413</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>IBUPROFEN</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241008</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of Ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals [see WARNINGS]. Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of Ibuprofen tablets in children have not been conducted.</IndicationAndUsage>
<Description>Ibuprofen tablets, USP contain the active ingredient ibuprofen, which is (±) - 2 - (p - isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74-77°C and is very slightly soluble in water (<1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula is represented below. Ibuprofen, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, soidum starch glycoate, stearic acid, talc, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>50090-7288-8</NDCCode>
<PackageDescription>20 TABLET, FILM COATED in 1 BOTTLE (50090-7288-8) </PackageDescription>
<NDC11Code>50090-7288-08</NDC11Code>
<ProductNDC>50090-7288</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ibuprofen</ProprietaryName>
<NonProprietaryName>Ibuprofen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240523</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202413</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>IBUPROFEN</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241008</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of Ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals [see WARNINGS]. Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of Ibuprofen tablets in children have not been conducted.</IndicationAndUsage>
<Description>Ibuprofen tablets, USP contain the active ingredient ibuprofen, which is (±) - 2 - (p - isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74-77°C and is very slightly soluble in water (<1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula is represented below. Ibuprofen, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, soidum starch glycoate, stearic acid, talc, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>50090-7288-9</NDCCode>
<PackageDescription>24 TABLET, FILM COATED in 1 BOTTLE (50090-7288-9) </PackageDescription>
<NDC11Code>50090-7288-09</NDC11Code>
<ProductNDC>50090-7288</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ibuprofen</ProprietaryName>
<NonProprietaryName>Ibuprofen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240523</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202413</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>IBUPROFEN</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241008</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of Ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals [see WARNINGS]. Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of Ibuprofen tablets in children have not been conducted.</IndicationAndUsage>
<Description>Ibuprofen tablets, USP contain the active ingredient ibuprofen, which is (±) - 2 - (p - isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74-77°C and is very slightly soluble in water (<1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula is represented below. Ibuprofen, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, soidum starch glycoate, stearic acid, talc, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>55154-7288-0</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BAG (55154-7288-0) / 1 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55154-7288-00</NDC11Code>
<ProductNDC>55154-7288</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Escitalopram</ProprietaryName>
<NonProprietaryName>Escitalopram</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141015</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090939</ApplicationNumber>
<LabelerName>Cardinal Health 107, LLC</LabelerName>
<SubstanceName>ESCITALOPRAM OXALATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141015</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Escitalopram is a selective serotonin reuptake inhibitor (SSRI) indicated for the: treatment of major depressive disorder (MDD) in adults and pediatric patients 12 years of age and older (1) treatment of generalized anxiety disorder (GAD) in adults (1).</IndicationAndUsage>
<Description>Escitalopram tablets contain escitalopram, a selective serotonin reuptake inhibitor (SSRI), present as escitalopram oxalate salt. Escitalopram is the pure S- enantiomer (single isomer) of the racemic bicyclic phthalane derivative citalopram. Escitalopram oxalate is designated S-(+)-1- [3-(dimethyl-amino)propyl]-1-(p-fluorophenyl)-5-phthalancarbonitrile oxalate with the following structural formula. The molecular formula is C20H 21FN2O C2H2O4 and the molecular weight is 414.40. Escitalopram oxalate, USP occurs as a fine, white to slightly-yellow powder and is freely soluble in methanol and dimethyl sulfoxide (DMSO), soluble in isotonic saline solution, sparingly soluble in water and ethanol, slightly soluble in ethyl acetate, and insoluble in heptane. Escitalopram tablets, USP are white to off-white, round, biconvex, film-coated tablets containing 6.38 mg, 12.75 mg and 25.55 mg escitalopram oxalate in strengths equivalent to 5 mg, 10 mg, and 20 mg, respectively, of escitalopram base. The 10 and 20 mg tablets are scored. The tablets also contain the following inactive ingredients: cellulose microcrystalline, colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, povidone and talc. The film coating contains hypromellose, polyethylene glycol 400 and titanium dioxide. Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>68788-7288-1</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (68788-7288-1) </PackageDescription>
<NDC11Code>68788-7288-01</NDC11Code>
<ProductNDC>68788-7288</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gabapentin</ProprietaryName>
<NonProprietaryName>Gabapentin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203244</ApplicationNumber>
<LabelerName>Preferred Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>GABAPENTIN</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-06-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68788-7288-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (68788-7288-3) </PackageDescription>
<NDC11Code>68788-7288-03</NDC11Code>
<ProductNDC>68788-7288</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gabapentin</ProprietaryName>
<NonProprietaryName>Gabapentin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203244</ApplicationNumber>
<LabelerName>Preferred Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>GABAPENTIN</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-06-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68788-7288-6</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (68788-7288-6) </PackageDescription>
<NDC11Code>68788-7288-06</NDC11Code>
<ProductNDC>68788-7288</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gabapentin</ProprietaryName>
<NonProprietaryName>Gabapentin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203244</ApplicationNumber>
<LabelerName>Preferred Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>GABAPENTIN</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-06-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68788-7288-8</NDCCode>
<PackageDescription>120 TABLET, FILM COATED in 1 BOTTLE (68788-7288-8) </PackageDescription>
<NDC11Code>68788-7288-08</NDC11Code>
<ProductNDC>68788-7288</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gabapentin</ProprietaryName>
<NonProprietaryName>Gabapentin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203244</ApplicationNumber>
<LabelerName>Preferred Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>GABAPENTIN</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-06-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68788-7288-9</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (68788-7288-9) </PackageDescription>
<NDC11Code>68788-7288-09</NDC11Code>
<ProductNDC>68788-7288</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gabapentin</ProprietaryName>
<NonProprietaryName>Gabapentin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203244</ApplicationNumber>
<LabelerName>Preferred Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>GABAPENTIN</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-06-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71872-7000-1</NDCCode>
<PackageDescription>1 VIAL in 1 BAG (71872-7000-1) / 3 mL in 1 VIAL</PackageDescription>
<NDC11Code>71872-7000-01</NDC11Code>
<ProductNDC>71872-7000</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amiodarone Hydrochloride</ProprietaryName>
<NonProprietaryName>Amiodarone Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20080225</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077234</ApplicationNumber>
<LabelerName>Medical Purchasing Solutions, LLC</LabelerName>
<SubstanceName>AMIODARONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antiarrhythmic [EPC], Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-06-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180228</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amiodarone Hydrochloride Injection is indicated for initiation of treatment and prophylaxis of frequently recurring ventricular fibrillation (VF) and hemodynamically unstable ventricular tachycardia (VT) in patients refractory to other therapy. Amiodarone Hydrochloride Injection also can be used to treat patients with VT/VF for whom oral amiodarone is indicated, but who are unable to take oral medication. During or after treatment with Amiodarone Hydrochloride Injection, patients may be transferred to oral amiodarone therapy [see Dosage and Administration ( 2)] . Use Amiodarone Hydrochloride Injection for acute treatment until the patient's ventricular arrhythmias are stabilized. Most patients will require this therapy for 48 to 96 hours, but Amiodarone Hydrochloride Injection may be safely administered for longer periods if necessary.</IndicationAndUsage>
<Description>Amiodarone Hydrochloride Injection contains Amiodarone Hydrochloride (C 25H 29I 2NO 3HCl), a class III antiarrhythmic drug. Amiodarone Hydrochloride is (2-butyl-3-benzo-furanyl)[4-[2-(diethylamino)ethoxy]-3,5-diiodophenyl]methanone hydrochloride. Amiodarone Hydrochloride has the following structural formula. Amiodarone Hydrochloride is a white to slightly yellow crystalline powder, and is very slightly soluble in water. It has a molecular weight of 681.78 and contains 37.3% iodine by weight. Amiodarone Hydrochloride Injection is a sterile clear, pale-yellow micellar solution visually free from particulates. Each milliliter of the amiodarone formulation contains 50 mg of amiodarone hydrochloride, 20.2 mg of benzyl alcohol, 100 mg of polysorbate 80, and water for injection. Amiodarone Hydrochloride Injection contains polysorbate 80, which is known to leach di-(2-ethylhexyl)phthalate (DEHP) from polyvinylchloride (PVC) [(see Dosage and Administration ( 2)] .</Description>
</NDC>
<NDC>
<NDCCode>71872-7001-1</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 BAG (71872-7001-1) / 1 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>71872-7001-01</NDC11Code>
<ProductNDC>71872-7001</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atropine Sulfate</ProprietaryName>
<NonProprietaryName>Atropine Sulfate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19921101</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Medical Purchasing Solutions, LLC</LabelerName>
<SubstanceName>ATROPINE SULFATE</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-06-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180226</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>In the treatment of parkinsonism. Rigidity and tremor relieved by the apparently selective depressant action. In the gastrointestinal tract to relieve pylorospasm, hypertonicity of the small intestine and the hypermotility of the colon. To relieve hypertonicity of the uterine muscle. To relax the spasm of biliary and uretered colic and bronchial spasm. To diminish the tone of the detrusor muscle of the urinary bladder in the treatment of urinary tract disorders. To control the crying and laughing episodes in patients with brain lesions. In cases of closed head injuries which cause acetylcholine to be released or to be present in cerebrospinal fluid which in turn causes abnormal EEG patterns, stupor and neurological signs. In the management of peptic ulcer. In anesthesia to control excessive salivation and bronchial secretions. To control rhinorrhea of acute rhinitis or hay fever. As an antidote for pilocarpine, physostigmine, isoflurophate, choline esters, certain species of Aminata and in cases of anticholinesterase insecticide poisoning. In poisoning by the organic phosphate cholinesterase inhibitors found in certain insecticides and by chemical warfare “nerve gases”, large doses of atropine relieve the muscarine-like symptoms and some of the central-nervous-system manifestations. Adults suspected of contact with organic phosphorus insecticides of the parathion type should be given atropine sulfate, 0.8 mg, intramuscularly. If an atropine effect is not apparent within thirty minutes or if definite symptoms of the poisoning occur (nausea, vomiting, diarrhea, pupillary constriction, pulmonary edema, fasciculations of eyelids and tongue, jerky ocular movements, and excessive sweating, salivation, and bronchial secretion), atropine sulfate, 2 mg, should be given intramuscularly at hourly intervals until signs of atropinization are observed. Up to two or three times this dose (4 to 6 mg) may be required in severe cases. Removing contaminated clothing, washing the skin, and commencing artificial respiration and supportive therapy are also indicated.</IndicationAndUsage>
<Description>Atropine Sulfate Injection, USP is a sterile, isotonic solution of Atropine Sulfate in Water for Injection q.s. Sodium Chloride added for isotonicity. pH adjusted with Sulfuric Acid. Preservative free. Atropine is a white crystalline alkaloid which may be extracted from belladonna root and hyoscyamine or may be produced synthetically. It is used in the form of atropine sulfate because this compound has much greater solubility in water. The structural formula of Atropine is as follows.</Description>
</NDC>
<NDC>
<NDCCode>71872-7002-1</NDCCode>
<PackageDescription>10 CARTON in 1 BAG (71872-7002-1) > 1 SYRINGE, PLASTIC in 1 CARTON > 10 mL in 1 SYRINGE, PLASTIC</PackageDescription>
<NDC11Code>71872-7002-01</NDC11Code>
<ProductNDC>71872-7002</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atropine Sulfate</ProprietaryName>
<NonProprietaryName>Atropine Sulfate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>ENDOTRACHEAL; INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20060119</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021146</ApplicationNumber>
<LabelerName>Medical Purchasing Solutions, LLC</LabelerName>
<SubstanceName>ATROPINE SULFATE</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-10-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180228</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atropine Sulfate Injection, USP, is indicated for temporary blockade of severe or life threatening muscarinic effects, e.g., as an antisialagogue, an antivagal agent, an antidote for organophosphorus or muscarinic mushroom poisoning, and to treat bradyasystolic cardiac arrest.</IndicationAndUsage>
<Description>Atropine Sulfate Injection, USP is a sterile, nonpyrogenic isotonic solution of atropine sulfate monohydrate in water for injection with sodium chloride sufficient to render the solution isotonic. It is administered parenterally by subcutaneous, intramuscular or intravenous injection. Each milliliter (mL) contains 0.1 mg (adult strength) or 0.05 mg (pediatric strength) of atropine sulfate monohydrate equivalent to 0.083 mg (adult strength) or 0.042 mg (pediatric strength) of atropine, and sodium chloride, 9 mg. May contain sodium hydroxide and/or sulfuric acid for pH adjustment 0.308 mOsmol/mL (calc.). pH (3.0 to 6.5). Sodium chloride added to render the solution isotonic for injection of the active ingredient is present in amounts insufficient to affect serum electrolyte balance of sodium (Na +) and chloride (Cl -) ions. The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended for use only as a single-dose injection. When smaller doses are required the unused portion should be discarded. Atropine Sulfate, USP is chemically designated 1α H, 5α H-Tropan-3-α-ol (±)-tropate (ester), sulfate (2:1) (salt) monohydrate, (C 17H 23NO 3) 2 ∙ H 2SO 4 ∙ H 2O, colorless crystals or white crystalline powder very soluble in water. It has the following structural formula:. Atropine, a naturally occurring belladonna alkaloid, is a racemic mixture of equal parts of d- and 1-hyocyamine, whose activity is due almost entirely to the levo isomer of the drug. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. The syringe is molded from a specially formulated polypropylene. Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the syringe material.</Description>
</NDC>
<NDC>
<NDCCode>71872-7003-1</NDCCode>
<PackageDescription>1 CARTON in 1 BAG (71872-7003-1) > 1 SYRINGE, PLASTIC in 1 CARTON > 50 mL in 1 SYRINGE, PLASTIC</PackageDescription>
<NDC11Code>71872-7003-01</NDC11Code>
<ProductNDC>71872-7003</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20051202</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019445</ApplicationNumber>
<LabelerName>Medical Purchasing Solutions, LLC</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>g/50mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-10-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180228</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>50% Dextrose Injection is indicated in the treatment of insulin hypoglycemia (hyperinsulinemia or insulin shock) to restore blood glucose levels. The solution is also indicated, after dilution, for intravenous infusion as a source of carbohydrate calories in patients whose oral intake is restricted or inadequate to maintain nutritional requirements. Slow infusion of hypertonic solutions is essential to insure proper utilization of dextrose and avoid production of hyperglycemia.</IndicationAndUsage>
<Description>50% Dextrose Injection, USP is a sterile, nonpyrogenic, hypertonic solution of dextrose in water for injection for intravenous injection as a fluid and nutrient replenisher. Each mL of fluid contains 0.5 g dextrose, hydrous which delivers 3.4 kcal/gram. The solution has an osmolarity of 2.53 mOsmol/mL (calc.), a pH of 3.2 to 6.5 and may contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended only for use as a single-dose injection. When smaller doses are required, the unused portion should be discarded with the entire unit. Dextrose, USP is chemically designated C 6H 12O 6 H 2O (D-glucose monohydrate), a hexose sugar freely soluble in water. Dextrose, hydrous has the following structural formula. Water for Injection, USP is chemically designated H 2O. The syringe is molded from a specially formulated polypropylene. Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the syringe material.</Description>
</NDC>
<NDC>
<NDCCode>71872-7005-1</NDCCode>
<PackageDescription>1 VIAL in 1 BAG (71872-7005-1) / 1 mL in 1 VIAL</PackageDescription>
<NDC11Code>71872-7005-01</NDC11Code>
<ProductNDC>71872-7005</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diphenhydramine Hydrochloride</ProprietaryName>
<NonProprietaryName>Diphenhydramine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>19721127</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA080817</ApplicationNumber>
<LabelerName>Medical Purchasing Solutions, LLC</LabelerName>
<SubstanceName>DIPHENHYDRAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-04-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180228</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diphenhydramine Hydrochloride Injection is effective in adults and pediatric patients, other than premature infants and neonates, for the following conditions when the oral form is impractical.</IndicationAndUsage>
<Description>Diphenhydramine Hydrochloride Injection is a sterile, nonpyrogenic solution for intravenous or deep intramuscular use as an antihistaminic agent. Each mL contains diphenhydramine hydrochloride 50 mg and benzethonium chloride 100 mcg in Water for Injection. pH 4.0-6.5; sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The chemical name of diphenhydramine hydrochloride is 2-(Diphenylmethoxy)-N,N-dimethylethylamine hydrochloride. The structural formula is as follows. C 17H 21NO HCl MW 291.82. Diphenhydramine hydrochloride occurs as a white crystalline powder and is freely soluble in water and alcohol.</Description>
</NDC>
<NDC>
<NDCCode>71872-7007-1</NDCCode>
<PackageDescription>1 CASE in 1 BAG (71872-7007-1) > 1 SYRINGE, GLASS in 1 CASE > .15 mL in 1 SYRINGE, GLASS</PackageDescription>
<NDC11Code>71872-7007-01</NDC11Code>
<ProductNDC>71872-7007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Epinephrine</ProprietaryName>
<NonProprietaryName>Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20100401</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020800</ApplicationNumber>
<LabelerName>Medical Purchasing Solutions, LLC</LabelerName>
<SubstanceName>EPINEPHRINE</SubstanceName>
<StrengthNumber>.15</StrengthNumber>
<StrengthUnit>mg/.15mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180228</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71872-7008-1</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 BAG (71872-7008-1) > 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>71872-7008-01</NDC11Code>
<ProductNDC>71872-7008</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Flumazenil</ProprietaryName>
<NonProprietaryName>Flumazenil</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20070101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078527</ApplicationNumber>
<LabelerName>Medical Purchasing Solutions, LLC</LabelerName>
<SubstanceName>FLUMAZENIL</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-10-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180228</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Flumazenil Injection, USP is indicated for the complete or partial reversal of the sedative effects of benzodiazepines in cases where general anesthesia has been induced and/or maintained with benzodiazepines, where sedation has been produced with benzodiazepines for diagnostic and therapeutic procedures, and for the management of benzodiazepine overdose.</IndicationAndUsage>
<Description>Flumazenil Injection, USP is a benzodiazepine receptor antagonist. Chemically, flumazenil is ethyl 8-fluoro-5,6-dihydro-5-methyl-6-oxo-4H-imidazo[1,5-a](1,4) benzodiazepine-3-carboxylate. Flumazenil has an imidazobenzodiazepine structure, a calculated molecular weight of 303.3, and the following structural formula. Flumazenil is a white to off-white crystalline compound with an octanol: buffer partition coefficient of 14 to 1 at pH 7.4. It is insoluble in water but slightly soluble in acidic aqueous solutions. Flumazenil injection is available as a sterile parenteral dosage form for intravenous administration. Each mL contains 0.1 mg of flumazenil compounded with 1.8 mg of methylparaben, 0.2 mg of propylparaben, 0.9% sodium chloride, 0.01% edetate disodium, and 0.01% acetic acid; the pH is adjusted to approximately 4 with hydrochloric acid and/or, if necessary, sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>71872-7009-1</NDCCode>
<PackageDescription>1 VIAL in 1 BAG (71872-7009-1) / 1 mL in 1 VIAL</PackageDescription>
<NDC11Code>71872-7009-01</NDC11Code>
<ProductNDC>71872-7009</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Naloxone Hydrochloride</ProprietaryName>
<NonProprietaryName>Nalxone Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19860924</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA070299</ApplicationNumber>
<LabelerName>Medical Purchasing Solutions, LLC</LabelerName>
<SubstanceName>NALOXONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Opioid Antagonist [EPC], Opioid Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-04-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190506</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Naloxone Hydrochloride Injection, USP is indicated for the complete or partial reversal of opioid depression, including respiratory depression, induced by natural and synthetic opioids, including propoxyphene, methadone, and certain mixed agonist-antagonist analgesics: nalbuphine, pentazocine, butorphanol, and cyclazocine. Naloxone Hydrochloride Injection, USP is also indicated for diagnosis of suspected or known acute opioid overdosage. Naloxone Hydrochloride Injection, USP may be useful as an adjunctive agent to increase blood pressure in the management of septic shock (see CLINICAL PHARMACOLOGY; Adjunctive Use in Septic Shock).</IndicationAndUsage>
<Description>Naloxone Hydrochloride Injection, USP, an opioid antagonist, is a synthetic congener of oxymorphone. In structure it differs from oxymorphone in that the methyl group on the nitrogen atom is replaced by an allyl group. Naloxone hydrochloride occurs as a white to slightly off-white powder, and is soluble in water, in dilute acids, and in strong alkali; slightly soluble in alcohol; practically insoluble in ether and in chloroform. Naloxone Hydrochloride Injection, USP is available as a sterile solution for intravenous, intramuscular and subcutaneous administration in the concentration 0.4 mg of naloxone hydrochloride per mL. pH is adjusted to 3.5 ± 0.5 with hydrochloric acid. The 0.4 mg/mL vial contains 8.6 mg/mL of sodium chloride and 2 mg/mL of methylparaben and propylparaben as preservatives in a ratio of 9:1.</Description>
</NDC>
<NDC>
<NDCCode>71872-7010-1</NDCCode>
<PackageDescription>1 BOTTLE in 1 BAG (71872-7010-1) / 25 TABLET in 1 BOTTLE</PackageDescription>
<NDC11Code>71872-7010-01</NDC11Code>
<ProductNDC>71872-7010</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nitroglycerin</ProprietaryName>
<NonProprietaryName>Nitroglycerin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>SUBLINGUAL</RouteName>
<StartMarketingDate>20160829</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208191</ApplicationNumber>
<LabelerName>Medical Purchasing Solutions, LLC</LabelerName>
<SubstanceName>NITROGLYCERIN</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-06-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180228</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nitroglycerin sublingual tablets are indicated for the acute relief of an attack or acute prophylaxis of angina pectoris due to coronary artery disease.</IndicationAndUsage>
<Description>Nitroglycerin is a stabilized sublingual compressed nitroglycerin tablet that contains 0.3 mg, 0.4 mg, or 0.6 mg nitroglycerin USP; as well as calcium stearate powder, colloidal silicon dioxide, hydrogenated vegetable oil, lactose monohydrate, and pregelatinized starch. Nitroglycerin, an organic nitrate, is a vasodilating agent. The chemical name for nitroglycerin is 1, 2, 3 propanetriol trinitrate and the chemical structure is:. Molecular weight: 227.09.</Description>
</NDC>
<NDC>
<NDCCode>71872-7012-1</NDCCode>
<PackageDescription>10 VIAL in 1 BAG (71872-7012-1) / 20 mL in 1 VIAL</PackageDescription>
<NDC11Code>71872-7012-01</NDC11Code>
<ProductNDC>71872-7012</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glycopyrrolate</ProprietaryName>
<NonProprietaryName>Glycopyrrolate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20170626</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207639</ApplicationNumber>
<LabelerName>Medical Purchasing Solutions, LLC</LabelerName>
<SubstanceName>GLYCOPYRROLATE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-06-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180228</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>In Anesthesia:. Glycopyrrolate Injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, Glycopyrrolate Injection may be used intraoperatively to counteract surgically or drug - induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants. In Peptic Ulcer: For use in adults as adjunctive therapy for the treatment of peptic ulcer when rapid anticholinergic effect is desired or when oral medication is not tolerated.</IndicationAndUsage>
<Description>Glycopyrrolate Injection is a synthetic anticholinergic agent. Each 1 mL contains. Glycopyrrolate, USP 0.2 mg. Water for Injection, USP q.s. Benzyl Alcohol, NF 0.9 % (preservative). pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name. 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C 19H 28BrNO 3 and the molecular weight is 398.33. Its structural formula is as follows. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection is a clear, colorless, sterile liquid; pH 2.0 – 3.0. The partition coefficient of glycopyrrolate in a n-octanol /water system is 0.304 (log 10 P= -1.52) at ambient room temperature (24 C).</Description>
</NDC>
<NDC>
<NDCCode>71872-7013-1</NDCCode>
<PackageDescription>1 VIAL in 1 BAG (71872-7013-1) / 20 mL in 1 VIAL</PackageDescription>
<NDC11Code>71872-7013-01</NDC11Code>
<ProductNDC>71872-7013</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glycopyrrolate</ProprietaryName>
<NonProprietaryName>Glycopyrrolate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20110921</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090963</ApplicationNumber>
<LabelerName>Medical Purchasing Solutions, LLC</LabelerName>
<SubstanceName>GLYCOPYRROLATE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-06-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181205</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glycopyrrolate Injection, USP is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, Glycopyrrolate Injection, USP may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants.</IndicationAndUsage>
<Description>Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains: Glycopyrrolate, USP 0.2 mg Water for Injection, USP q.s. Benzyl Alcohol, NF 0.9% (preservative) pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C 19H 28BrNO 3 and the molecular weight is 398.33. Its structural formula is as follows. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection, USP is a clear, colorless, sterile liquid; pH 2.0 – 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log 10 P= -1.52) at ambient room temperature (24°C).</Description>
</NDC>
<NDC>
<NDCCode>71872-7014-1</NDCCode>
<PackageDescription>1 VIAL in 1 BAG (71872-7014-1) / 1 mL in 1 VIAL</PackageDescription>
<NDC11Code>71872-7014-01</NDC11Code>
<ProductNDC>71872-7014</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vasostrict</ProprietaryName>
<NonProprietaryName>Vasopressin</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20141112</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA204485</ApplicationNumber>
<LabelerName>Medical Purchasin Solutions, LLC</LabelerName>
<SubstanceName>VASOPRESSIN, UNSPECIFIED</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>[USP'U]/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-06-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180228</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vasostrict ® is indicated to increase blood pressure in adults with vasodilatory shock (e.g., post-cardiotomy or sepsis) who remain hypotensive despite fluids and catecholamines.</IndicationAndUsage>
<Description>Vasopressin is a polypeptide hormone that causes contraction of vascular and other smooth muscles and antidiuresis. Vasostrict ® is a sterile, aqueous solution of synthetic arginine vasopressin for intravenous administration. The 1 mL solution contains vasopressin 20 units/mL, Water for Injection, USP, and sodium acetate buffer adjusted to a pH of 3.8. The 10 mL solution contains vasopressin 20 units/mL, chlorobutanol, NF 0.5% as a preservative, and Water for Injection, USP and, sodium acetate buffer adjusted to a pH of 3.8. The chemical name of vasopressin is Cyclo (1-6) L-Cysteinyl-L-Tyrosyl-L-Phenylalanyl-L-Glutaminyl-L-Asparaginyl-L-Cysteinyl-L-Prolyl-L-Arginyl-L-Glycinamide. It is a white to off-white amorphous powder, freely soluble in water. The structural formula is. Molecular Formula: C 46H 65N 15O 12S 2 Molecular Weight: 1084.23. One mg is equivalent to 530 units.</Description>
</NDC>
</NDCList>