{
"NDC": [
{
"NDCCode": "71921-250-96",
"PackageDescription": "1 BOTTLE in 1 CARTON (71921-250-96) / 96 TABLET, COATED in 1 BOTTLE",
"NDC11Code": "71921-0250-96",
"ProductNDC": "71921-250",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lofexidine",
"NonProprietaryName": "Lofexidine",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240821",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218613",
"LabelerName": "Florida Pharmaceutical Products, LLC",
"SubstanceName": "LOFEXIDINE HYDROCHLORIDE",
"StrengthNumber": ".18",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-05-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240821",
"SamplePackage": "N",
"IndicationAndUsage": "Lofexidine tablets are indicated for mitigation of opioid withdrawal symptoms to facilitate abrupt opioid discontinuation in adults.",
"Description": "Lofexidine tablets contain lofexidine, a central alpha-2 adrenergic agonist, as the hydrochloride salt. Lofexidine hydrochloride is chemically designated as 2-[1-(2,6-dichlorophenoxy)ethyl]-4,5 dihydro-1H- imidazole monohydrochloride with a molecular formula of C11H12Cl2N2OHCl. Its molecular weight is 295.6 g/mole and its structural formula is. Lofexidine hydrochloride is a white to off-white crystalline powder freely soluble in water, methanol, and ethanol. It is slightly soluble in chloroform and practically insoluble in n-hexane and benzene. Lofexidine tablets are available as round, concave-shaped, peach-colored, film-coated tablets, debossed with “C” on one side and “71” on other side for oral administration. Each tablet contains 0.18 lofexidine, equivalent to 0.2 mg of lofexidine hydrochloride and the following inactive ingredients: 87 mg lactose monohydrate, 12.3 mg citric acid monohydrate, 5.7 mg microcrystalline cellulose, 1.1 mg povidone K-30, 0.70 mg sodium lauryl sulphate, 5.0 mg sodium starch glycolate, 2.0 mg calcium stearate and Opadry AMB II orange 88A530003 (contains polyvinyl alcohol, talc, titanium dioxide, Glyceryl mono and dicaprylocaprate, sodium lauryl sulfate, FD&C yellow #6/sunset yellow FCF aluminum lake and FD&C blue #2/indigo carmine aluminium lake)."
},
{
"NDCCode": "49035-563-96",
"PackageDescription": "2 BOTTLE, PLASTIC in 1 CARTON (49035-563-96) / 250 TABLET, DELAYED RELEASE in 1 BOTTLE, PLASTIC",
"NDC11Code": "49035-0563-96",
"ProductNDC": "49035-563",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Low Dose Aspirin",
"NonProprietaryName": "Aspirin",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20110501",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M013",
"LabelerName": "Wal-Mart Stores Inc",
"SubstanceName": "ASPIRIN",
"StrengthNumber": "81",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Platelet Aggregation [PE], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC], Platelet Aggregation Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20110501",
"SamplePackage": "N",
"IndicationAndUsage": "for the temporary relief of minor aches and pains or as recommended by your doctor. Because of its delayed action, this product will not provide fast relief of headaches or other symptoms needing immediate relief."
},
{
"NDCCode": "71921-150-25",
"PackageDescription": "250 TABLET in 1 BOTTLE (71921-150-25) ",
"NDC11Code": "71921-0150-25",
"ProductNDC": "71921-150",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mercaptopurine",
"NonProprietaryName": "Mercaptopurine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260130",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA009053",
"LabelerName": "Florida Pharmaceutical Products, LLC",
"SubstanceName": "MERCAPTOPURINE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260130",
"SamplePackage": "N",
"IndicationAndUsage": "Mercaptopurine tablets is a nucleoside metabolic inhibitor indicated for treatment of adult and pediatric patients with acute lymphoblastic leukemia (ALL) as part of a combination chemotherapy maintenance regimen. (1.1).",
"Description": "Mercaptopurine is a nucleoside metabolic inhibitor, the chemical name is 6H-purine-6-thione, 1,7-dihydro-, monohydrate. The molecular formula is C5H4N4S H2O and the molecular weight is 170.20. Its structural formula is. Mercaptopurine is a yellow, crystalline powder. Mercaptopurine is practically insoluble in water and in ether. It has a pKa of 7.8, an average tapped density of 1.0 g/mL and average bulk density of 0.85 g/mL. It dissolves in solutions of alkali hydroxides.Mercaptopurine tablets is available for oral use. Each scored tablet contains 50 mg mercaptopurine and the following inactive ingredients: corn starch, pregelatinized, potato starch, lactose, magnesium stearate and stearic acid."
},
{
"NDCCode": "71921-250-36",
"PackageDescription": "1 BOTTLE in 1 CARTON (71921-250-36) / 36 TABLET, COATED in 1 BOTTLE",
"NDC11Code": "71921-0250-36",
"ProductNDC": "71921-250",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lofexidine",
"NonProprietaryName": "Lofexidine",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240821",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218613",
"LabelerName": "Florida Pharmaceutical Products, LLC",
"SubstanceName": "LOFEXIDINE HYDROCHLORIDE",
"StrengthNumber": ".18",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-05-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240821",
"SamplePackage": "N",
"IndicationAndUsage": "Lofexidine tablets are indicated for mitigation of opioid withdrawal symptoms to facilitate abrupt opioid discontinuation in adults.",
"Description": "Lofexidine tablets contain lofexidine, a central alpha-2 adrenergic agonist, as the hydrochloride salt. Lofexidine hydrochloride is chemically designated as 2-[1-(2,6-dichlorophenoxy)ethyl]-4,5 dihydro-1H- imidazole monohydrochloride with a molecular formula of C11H12Cl2N2OHCl. Its molecular weight is 295.6 g/mole and its structural formula is. Lofexidine hydrochloride is a white to off-white crystalline powder freely soluble in water, methanol, and ethanol. It is slightly soluble in chloroform and practically insoluble in n-hexane and benzene. Lofexidine tablets are available as round, concave-shaped, peach-colored, film-coated tablets, debossed with “C” on one side and “71” on other side for oral administration. Each tablet contains 0.18 lofexidine, equivalent to 0.2 mg of lofexidine hydrochloride and the following inactive ingredients: 87 mg lactose monohydrate, 12.3 mg citric acid monohydrate, 5.7 mg microcrystalline cellulose, 1.1 mg povidone K-30, 0.70 mg sodium lauryl sulphate, 5.0 mg sodium starch glycolate, 2.0 mg calcium stearate and Opadry AMB II orange 88A530003 (contains polyvinyl alcohol, talc, titanium dioxide, Glyceryl mono and dicaprylocaprate, sodium lauryl sulfate, FD&C yellow #6/sunset yellow FCF aluminum lake and FD&C blue #2/indigo carmine aluminium lake)."
},
{
"NDCCode": "71921-178-20",
"PackageDescription": "120 TABLET in 1 BOTTLE (71921-178-20) ",
"NDC11Code": "71921-0178-20",
"ProductNDC": "71921-178",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Abiraterone Acetate",
"NonProprietaryName": "Abiraterone Acetate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212462",
"LabelerName": "Florida Pharmaceutical Products, LLC.",
"SubstanceName": "ABIRATERONE ACETATE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 17A1 Inhibitor [EPC], Cytochrome P450 17A1 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-05-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220815",
"SamplePackage": "N",
"IndicationAndUsage": "Abiraterone acetate is indicated in combination with prednisone for the treatment of patients with: 1 Metastatic castration-resistant prostate cancer (CRPC), 2 Metastatic high-risk castration-sensitive prostate cancer (CSPC).",
"Description": "Abiraterone acetate, USP, the active ingredient of abiraterone acetate tablets, USP is the acetyl ester of abiraterone. Abiraterone is an inhibitor of CYP17 (17α-hydroxylase/C17,20-lyase). Each abiraterone acetate tablet, USP contains 250 mg of abiraterone acetate, USP. Abiraterone acetate, USP is designated chemically as (3β)-17-(3-pyridinyl) androsta-5,16-dien-3-yl acetate and its structure is. Abiraterone acetate, USP is a white to off-white, non-hygroscopic, crystalline powder. Its molecular formula is C26H33NO2 and it has a molecular weight of 391.55. Abiraterone acetate, USP is a lipophilic compound with an octanol-water partition coefficient of 5.12 (Log P) and is practically insoluble in water. The pKa of the aromatic nitrogen is 5.19. Abiraterone acetate tablets, USP are available in 250 mg uncoated tablets with the following inactive ingredients: 1 250 mg uncoated tablets: silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, and sodium lauryl sulfate."
},
{
"NDCCode": "71921-220-06",
"PackageDescription": "60 TABLET in 1 BOTTLE (71921-220-06) ",
"NDC11Code": "71921-0220-06",
"ProductNDC": "71921-220",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lacosamide",
"NonProprietaryName": "Lacosamide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230921",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208308",
"LabelerName": "Florida Pharmaceutical Products, LLC",
"SubstanceName": "LACOSAMIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2025-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230921",
"SamplePackage": "N",
"IndicationAndUsage": "Lacosamide tablets are indicated for: 1 Treatment of partial-onset seizures in patients 1 month of age and older (1.1) , 2 Adjunctive therapy in the treatment of primary generalized tonic-clonic seizures in patients 4 years of age and older (1.2).",
"Description": "The chemical name of lacosamide, USP the single (R)-enantiomer, is (R)-2-acetamido-N-benzyl-3-methoxypropionamide (IUPAC). Lacosamide is a functionalized amino acid. Its molecular formula is C13H18N2O3 and its molecular weight is 250.30. The chemical structure is. Lacosamide, USP is a white to light yellow powder. It is sparingly soluble in water and slightly soluble in acetonitrile and ethanol."
},
{
"NDCCode": "71921-221-06",
"PackageDescription": "60 TABLET in 1 BOTTLE (71921-221-06) ",
"NDC11Code": "71921-0221-06",
"ProductNDC": "71921-221",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lacosamide",
"NonProprietaryName": "Lacosamide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230921",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208308",
"LabelerName": "Florida Pharmaceutical Products, LLC",
"SubstanceName": "LACOSAMIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2025-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230921",
"SamplePackage": "N",
"IndicationAndUsage": "Lacosamide tablets are indicated for: 1 Treatment of partial-onset seizures in patients 1 month of age and older (1.1) , 2 Adjunctive therapy in the treatment of primary generalized tonic-clonic seizures in patients 4 years of age and older (1.2).",
"Description": "The chemical name of lacosamide, USP the single (R)-enantiomer, is (R)-2-acetamido-N-benzyl-3-methoxypropionamide (IUPAC). Lacosamide is a functionalized amino acid. Its molecular formula is C13H18N2O3 and its molecular weight is 250.30. The chemical structure is. Lacosamide, USP is a white to light yellow powder. It is sparingly soluble in water and slightly soluble in acetonitrile and ethanol."
},
{
"NDCCode": "71921-222-06",
"PackageDescription": "60 TABLET in 1 BOTTLE (71921-222-06) ",
"NDC11Code": "71921-0222-06",
"ProductNDC": "71921-222",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lacosamide",
"NonProprietaryName": "Lacosamide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230921",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208308",
"LabelerName": "Florida Pharmaceutical Products, LLC",
"SubstanceName": "LACOSAMIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2025-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230921",
"SamplePackage": "N",
"IndicationAndUsage": "Lacosamide tablets are indicated for: 1 Treatment of partial-onset seizures in patients 1 month of age and older (1.1) , 2 Adjunctive therapy in the treatment of primary generalized tonic-clonic seizures in patients 4 years of age and older (1.2).",
"Description": "The chemical name of lacosamide, USP the single (R)-enantiomer, is (R)-2-acetamido-N-benzyl-3-methoxypropionamide (IUPAC). Lacosamide is a functionalized amino acid. Its molecular formula is C13H18N2O3 and its molecular weight is 250.30. The chemical structure is. Lacosamide, USP is a white to light yellow powder. It is sparingly soluble in water and slightly soluble in acetonitrile and ethanol."
},
{
"NDCCode": "71921-223-06",
"PackageDescription": "60 TABLET in 1 BOTTLE (71921-223-06) ",
"NDC11Code": "71921-0223-06",
"ProductNDC": "71921-223",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lacosamide",
"NonProprietaryName": "Lacosamide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230921",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208308",
"LabelerName": "Florida Pharmaceutical Products, LLC",
"SubstanceName": "LACOSAMIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2025-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230921",
"SamplePackage": "N",
"IndicationAndUsage": "Lacosamide tablets are indicated for: 1 Treatment of partial-onset seizures in patients 1 month of age and older (1.1) , 2 Adjunctive therapy in the treatment of primary generalized tonic-clonic seizures in patients 4 years of age and older (1.2).",
"Description": "The chemical name of lacosamide, USP the single (R)-enantiomer, is (R)-2-acetamido-N-benzyl-3-methoxypropionamide (IUPAC). Lacosamide is a functionalized amino acid. Its molecular formula is C13H18N2O3 and its molecular weight is 250.30. The chemical structure is. Lacosamide, USP is a white to light yellow powder. It is sparingly soluble in water and slightly soluble in acetonitrile and ethanol."
},
{
"NDCCode": "71921-411-02",
"PackageDescription": "1 BOTTLE in 1 CARTON (71921-411-02) / 200 mL in 1 BOTTLE",
"NDC11Code": "71921-0411-02",
"ProductNDC": "71921-411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lacosamide Oral Solution",
"NonProprietaryName": "Lacosamide Oral",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20260130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA220386",
"LabelerName": "Florida Pharmaceutical Products, LLC",
"SubstanceName": "LACOSAMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"DEASchedule": "CV",
"Status": "Deprecated",
"LastUpdate": "2026-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260130",
"SamplePackage": "N",
"IndicationAndUsage": "Lacosamide oral solution is indicated for: 1 Treatment of partial-onset seizures in patients 1 month of age and older (1.1), 2 Adjunctive therapy in the treatment of primary generalized tonic-clonic seizures in patients 4 years of age and older (1.2).",
"Description": "The chemical name of Lacosamide the single (R)-enantiomer, is (R)-2-acetamido-N-benzyl-3- methoxypropionamide (IUPAC). Lacosamide is a functionalized amino acid. Its molecular formula is C13H18N2O3 and its molecular weight is 250.3. The chemical structure is. Lacosamide, USP is a white to light yellow powder. It is sparingly soluble in water and slightly soluble in acetonitrile and ethanol."
},
{
"NDCCode": "71921-411-71",
"PackageDescription": "1 BOTTLE in 1 CARTON (71921-411-71) / 200 mL in 1 BOTTLE",
"NDC11Code": "71921-0411-71",
"ProductNDC": "71921-411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lacosamide Oral Solution",
"NonProprietaryName": "Lacosamide Oral",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20260130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA220386",
"LabelerName": "Florida Pharmaceutical Products, LLC",
"SubstanceName": "LACOSAMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2026-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260130",
"SamplePackage": "N",
"IndicationAndUsage": "Lacosamide oral solution is indicated for: 1 Treatment of partial-onset seizures in patients 1 month of age and older (1.1), 2 Adjunctive therapy in the treatment of primary generalized tonic-clonic seizures in patients 4 years of age and older (1.2).",
"Description": "The chemical name of Lacosamide the single (R)-enantiomer, is (R)-2-acetamido-N-benzyl-3- methoxypropionamide (IUPAC). Lacosamide is a functionalized amino acid. Its molecular formula is C13H18N2O3 and its molecular weight is 250.3. The chemical structure is. Lacosamide, USP is a white to light yellow powder. It is sparingly soluble in water and slightly soluble in acetonitrile and ethanol."
},
{
"NDCCode": "0004-0259-01",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (0004-0259-01) / 100 CAPSULE in 1 BOTTLE, PLASTIC",
"NDC11Code": "00004-0259-01",
"ProductNDC": "0004-0259",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cellcept",
"NonProprietaryName": "Mycophenolate Mofetil",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19950503",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050722",
"LabelerName": "Genentech, Inc.",
"SubstanceName": "MYCOPHENOLATE MOFETIL",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimetabolite Immunosuppressant [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19950503",
"SamplePackage": "N",
"IndicationAndUsage": "CELLCEPT [mycophenolate mofetil (MMF)] is indicated for the prophylaxis of organ rejection, in adult and pediatric recipients 3 months of age and older of allogeneic kidney [see Clinical Studies (14.1)], heart [see Clinical Studies (14.2)] or liver transplants [see Clinical Studies (14.3)], in combination with other immunosuppressants.",
"Description": "CELLCEPT (mycophenolate mofetil) is an antimetabolite immunosuppressant. It is the 2-morpholinoethyl ester of mycophenolic acid (MPA), an immunosuppressive agent; inosine monophosphate dehydrogenase (IMPDH) inhibitor. The chemical name for mycophenolate mofetil (MMF) is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate. It has an empirical formula of C23H31NO7, a molecular weight of 433.50, and the following structural formula. MMF is a white to off-white crystalline powder. It is slightly soluble in water (43 µg/mL at pH 7.4); the solubility increases in acidic medium (4.27 mg/mL at pH 3.6). It is freely soluble in acetone, soluble in methanol, and sparingly soluble in ethanol. The apparent partition coefficient in 1-octanol/water (pH 7.4) buffer solution is 238. The pKa values for MMF are 5.6 for the morpholino group and 8.5 for the phenolic group. MMF hydrochloride has a solubility of 65.8 mg/mL in 5% Dextrose Injection USP (D5W). The pH of the reconstituted solution is 2.4 to 4.1. CELLCEPT is available for oral administration as capsules containing 250 mg of MMF, tablets containing 500 mg of MMF, and as a powder for oral suspension which, when reconstituted, contains 200 mg/mL of MMF. Inactive ingredients in CELLCEPT 250 mg capsules include croscarmellose sodium, magnesium stearate, povidone (K-90) and pregelatinized starch. The capsule shells contain black iron oxide, FD&C blue #2, gelatin, red iron oxide, silicon dioxide, sodium lauryl sulfate, titanium dioxide, and yellow iron oxide. Inactive ingredients in CELLCEPT 500 mg tablets include croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone (K-90), and Opadry® lavender Y-5R-10272-A (hydroxypropyl methylcellulose, hydroxypropyl cellulose, titanium dioxide, polyethylene glycol 400, FD&C Blue No. 2 aluminum lake [indigo carmine aluminum lake], and red iron oxide). Inactive ingredients in CELLCEPT Oral Suspension include aspartame, citric acid anhydrous, colloidal silicon dioxide, methylparaben, mixed fruit flavor, sodium citrate dihydrate, sorbitol, soybean lecithin, and xanthan gum. CELLCEPT Intravenous is the hydrochloride salt of MMF. The chemical name for the hydrochloride salt of MMF is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate hydrochloride. It has an empirical formula of C23H31NO7 HCl and a molecular weight of 469.96. CELLCEPT Intravenous is available as a sterile white to off-white lyophilized powder in single-dose vials containing MMF hydrochloride for administration by intravenous infusion only. Each vial contains 500 mg of mycophenolate mofetil equivalent to 542 mg of mycophenolate mofetil hydrochloride. The inactive ingredients are polysorbate 80, 25 mg, and citric acid, 5 mg. Sodium hydroxide or hydrochloric acid may have been used in the manufacture of CELLCEPT Intravenous to adjust the pH. Reconstitution and dilution with 5% Dextrose Injection USP yields a slightly yellow solution of MMF, 6 mg/mL [see Dosage and Administration (2.6)]."
},
{
"NDCCode": "0004-0259-43",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (0004-0259-43) / 500 CAPSULE in 1 BOTTLE, PLASTIC",
"NDC11Code": "00004-0259-43",
"ProductNDC": "0004-0259",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cellcept",
"NonProprietaryName": "Mycophenolate Mofetil",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19950503",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050722",
"LabelerName": "Genentech, Inc.",
"SubstanceName": "MYCOPHENOLATE MOFETIL",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimetabolite Immunosuppressant [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19950503",
"SamplePackage": "N",
"IndicationAndUsage": "CELLCEPT [mycophenolate mofetil (MMF)] is indicated for the prophylaxis of organ rejection, in adult and pediatric recipients 3 months of age and older of allogeneic kidney [see Clinical Studies (14.1)], heart [see Clinical Studies (14.2)] or liver transplants [see Clinical Studies (14.3)], in combination with other immunosuppressants.",
"Description": "CELLCEPT (mycophenolate mofetil) is an antimetabolite immunosuppressant. It is the 2-morpholinoethyl ester of mycophenolic acid (MPA), an immunosuppressive agent; inosine monophosphate dehydrogenase (IMPDH) inhibitor. The chemical name for mycophenolate mofetil (MMF) is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate. It has an empirical formula of C23H31NO7, a molecular weight of 433.50, and the following structural formula. MMF is a white to off-white crystalline powder. It is slightly soluble in water (43 µg/mL at pH 7.4); the solubility increases in acidic medium (4.27 mg/mL at pH 3.6). It is freely soluble in acetone, soluble in methanol, and sparingly soluble in ethanol. The apparent partition coefficient in 1-octanol/water (pH 7.4) buffer solution is 238. The pKa values for MMF are 5.6 for the morpholino group and 8.5 for the phenolic group. MMF hydrochloride has a solubility of 65.8 mg/mL in 5% Dextrose Injection USP (D5W). The pH of the reconstituted solution is 2.4 to 4.1. CELLCEPT is available for oral administration as capsules containing 250 mg of MMF, tablets containing 500 mg of MMF, and as a powder for oral suspension which, when reconstituted, contains 200 mg/mL of MMF. Inactive ingredients in CELLCEPT 250 mg capsules include croscarmellose sodium, magnesium stearate, povidone (K-90) and pregelatinized starch. The capsule shells contain black iron oxide, FD&C blue #2, gelatin, red iron oxide, silicon dioxide, sodium lauryl sulfate, titanium dioxide, and yellow iron oxide. Inactive ingredients in CELLCEPT 500 mg tablets include croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone (K-90), and Opadry® lavender Y-5R-10272-A (hydroxypropyl methylcellulose, hydroxypropyl cellulose, titanium dioxide, polyethylene glycol 400, FD&C Blue No. 2 aluminum lake [indigo carmine aluminum lake], and red iron oxide). Inactive ingredients in CELLCEPT Oral Suspension include aspartame, citric acid anhydrous, colloidal silicon dioxide, methylparaben, mixed fruit flavor, sodium citrate dihydrate, sorbitol, soybean lecithin, and xanthan gum. CELLCEPT Intravenous is the hydrochloride salt of MMF. The chemical name for the hydrochloride salt of MMF is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate hydrochloride. It has an empirical formula of C23H31NO7 HCl and a molecular weight of 469.96. CELLCEPT Intravenous is available as a sterile white to off-white lyophilized powder in single-dose vials containing MMF hydrochloride for administration by intravenous infusion only. Each vial contains 500 mg of mycophenolate mofetil equivalent to 542 mg of mycophenolate mofetil hydrochloride. The inactive ingredients are polysorbate 80, 25 mg, and citric acid, 5 mg. Sodium hydroxide or hydrochloric acid may have been used in the manufacture of CELLCEPT Intravenous to adjust the pH. Reconstitution and dilution with 5% Dextrose Injection USP yields a slightly yellow solution of MMF, 6 mg/mL [see Dosage and Administration (2.6)]."
},
{
"NDCCode": "0004-0260-01",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (0004-0260-01) / 100 TABLET, FILM COATED in 1 BOTTLE, PLASTIC",
"NDC11Code": "00004-0260-01",
"ProductNDC": "0004-0260",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cellcept",
"NonProprietaryName": "Mycophenolate Mofetil",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19970619",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050723",
"LabelerName": "Genentech, Inc.",
"SubstanceName": "MYCOPHENOLATE MOFETIL",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimetabolite Immunosuppressant [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19970619",
"SamplePackage": "N",
"IndicationAndUsage": "CELLCEPT [mycophenolate mofetil (MMF)] is indicated for the prophylaxis of organ rejection, in adult and pediatric recipients 3 months of age and older of allogeneic kidney [see Clinical Studies (14.1)], heart [see Clinical Studies (14.2)] or liver transplants [see Clinical Studies (14.3)], in combination with other immunosuppressants.",
"Description": "CELLCEPT (mycophenolate mofetil) is an antimetabolite immunosuppressant. It is the 2-morpholinoethyl ester of mycophenolic acid (MPA), an immunosuppressive agent; inosine monophosphate dehydrogenase (IMPDH) inhibitor. The chemical name for mycophenolate mofetil (MMF) is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate. It has an empirical formula of C23H31NO7, a molecular weight of 433.50, and the following structural formula. MMF is a white to off-white crystalline powder. It is slightly soluble in water (43 µg/mL at pH 7.4); the solubility increases in acidic medium (4.27 mg/mL at pH 3.6). It is freely soluble in acetone, soluble in methanol, and sparingly soluble in ethanol. The apparent partition coefficient in 1-octanol/water (pH 7.4) buffer solution is 238. The pKa values for MMF are 5.6 for the morpholino group and 8.5 for the phenolic group. MMF hydrochloride has a solubility of 65.8 mg/mL in 5% Dextrose Injection USP (D5W). The pH of the reconstituted solution is 2.4 to 4.1. CELLCEPT is available for oral administration as capsules containing 250 mg of MMF, tablets containing 500 mg of MMF, and as a powder for oral suspension which, when reconstituted, contains 200 mg/mL of MMF. Inactive ingredients in CELLCEPT 250 mg capsules include croscarmellose sodium, magnesium stearate, povidone (K-90) and pregelatinized starch. The capsule shells contain black iron oxide, FD&C blue #2, gelatin, red iron oxide, silicon dioxide, sodium lauryl sulfate, titanium dioxide, and yellow iron oxide. Inactive ingredients in CELLCEPT 500 mg tablets include croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone (K-90), and Opadry® lavender Y-5R-10272-A (hydroxypropyl methylcellulose, hydroxypropyl cellulose, titanium dioxide, polyethylene glycol 400, FD&C Blue No. 2 aluminum lake [indigo carmine aluminum lake], and red iron oxide). Inactive ingredients in CELLCEPT Oral Suspension include aspartame, citric acid anhydrous, colloidal silicon dioxide, methylparaben, mixed fruit flavor, sodium citrate dihydrate, sorbitol, soybean lecithin, and xanthan gum. CELLCEPT Intravenous is the hydrochloride salt of MMF. The chemical name for the hydrochloride salt of MMF is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate hydrochloride. It has an empirical formula of C23H31NO7 HCl and a molecular weight of 469.96. CELLCEPT Intravenous is available as a sterile white to off-white lyophilized powder in single-dose vials containing MMF hydrochloride for administration by intravenous infusion only. Each vial contains 500 mg of mycophenolate mofetil equivalent to 542 mg of mycophenolate mofetil hydrochloride. The inactive ingredients are polysorbate 80, 25 mg, and citric acid, 5 mg. Sodium hydroxide or hydrochloric acid may have been used in the manufacture of CELLCEPT Intravenous to adjust the pH. Reconstitution and dilution with 5% Dextrose Injection USP yields a slightly yellow solution of MMF, 6 mg/mL [see Dosage and Administration (2.6)]."
},
{
"NDCCode": "0004-0260-43",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (0004-0260-43) / 500 TABLET, FILM COATED in 1 BOTTLE, PLASTIC",
"NDC11Code": "00004-0260-43",
"ProductNDC": "0004-0260",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cellcept",
"NonProprietaryName": "Mycophenolate Mofetil",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19970619",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050723",
"LabelerName": "Genentech, Inc.",
"SubstanceName": "MYCOPHENOLATE MOFETIL",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimetabolite Immunosuppressant [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19970619",
"SamplePackage": "N",
"IndicationAndUsage": "CELLCEPT [mycophenolate mofetil (MMF)] is indicated for the prophylaxis of organ rejection, in adult and pediatric recipients 3 months of age and older of allogeneic kidney [see Clinical Studies (14.1)], heart [see Clinical Studies (14.2)] or liver transplants [see Clinical Studies (14.3)], in combination with other immunosuppressants.",
"Description": "CELLCEPT (mycophenolate mofetil) is an antimetabolite immunosuppressant. It is the 2-morpholinoethyl ester of mycophenolic acid (MPA), an immunosuppressive agent; inosine monophosphate dehydrogenase (IMPDH) inhibitor. The chemical name for mycophenolate mofetil (MMF) is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate. It has an empirical formula of C23H31NO7, a molecular weight of 433.50, and the following structural formula. MMF is a white to off-white crystalline powder. It is slightly soluble in water (43 µg/mL at pH 7.4); the solubility increases in acidic medium (4.27 mg/mL at pH 3.6). It is freely soluble in acetone, soluble in methanol, and sparingly soluble in ethanol. The apparent partition coefficient in 1-octanol/water (pH 7.4) buffer solution is 238. The pKa values for MMF are 5.6 for the morpholino group and 8.5 for the phenolic group. MMF hydrochloride has a solubility of 65.8 mg/mL in 5% Dextrose Injection USP (D5W). The pH of the reconstituted solution is 2.4 to 4.1. CELLCEPT is available for oral administration as capsules containing 250 mg of MMF, tablets containing 500 mg of MMF, and as a powder for oral suspension which, when reconstituted, contains 200 mg/mL of MMF. Inactive ingredients in CELLCEPT 250 mg capsules include croscarmellose sodium, magnesium stearate, povidone (K-90) and pregelatinized starch. The capsule shells contain black iron oxide, FD&C blue #2, gelatin, red iron oxide, silicon dioxide, sodium lauryl sulfate, titanium dioxide, and yellow iron oxide. Inactive ingredients in CELLCEPT 500 mg tablets include croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone (K-90), and Opadry® lavender Y-5R-10272-A (hydroxypropyl methylcellulose, hydroxypropyl cellulose, titanium dioxide, polyethylene glycol 400, FD&C Blue No. 2 aluminum lake [indigo carmine aluminum lake], and red iron oxide). Inactive ingredients in CELLCEPT Oral Suspension include aspartame, citric acid anhydrous, colloidal silicon dioxide, methylparaben, mixed fruit flavor, sodium citrate dihydrate, sorbitol, soybean lecithin, and xanthan gum. CELLCEPT Intravenous is the hydrochloride salt of MMF. The chemical name for the hydrochloride salt of MMF is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate hydrochloride. It has an empirical formula of C23H31NO7 HCl and a molecular weight of 469.96. CELLCEPT Intravenous is available as a sterile white to off-white lyophilized powder in single-dose vials containing MMF hydrochloride for administration by intravenous infusion only. Each vial contains 500 mg of mycophenolate mofetil equivalent to 542 mg of mycophenolate mofetil hydrochloride. The inactive ingredients are polysorbate 80, 25 mg, and citric acid, 5 mg. Sodium hydroxide or hydrochloric acid may have been used in the manufacture of CELLCEPT Intravenous to adjust the pH. Reconstitution and dilution with 5% Dextrose Injection USP yields a slightly yellow solution of MMF, 6 mg/mL [see Dosage and Administration (2.6)]."
},
{
"NDCCode": "0004-0261-29",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (0004-0261-29) / 225 mL in 1 BOTTLE, PLASTIC",
"NDC11Code": "00004-0261-29",
"ProductNDC": "0004-0261",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cellcept",
"NonProprietaryName": "Mycophenolate Mofetil",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "19981001",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050759",
"LabelerName": "Genentech, Inc.",
"SubstanceName": "MYCOPHENOLATE MOFETIL",
"StrengthNumber": "200",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antimetabolite Immunosuppressant [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19981001",
"SamplePackage": "N",
"IndicationAndUsage": "CELLCEPT [mycophenolate mofetil (MMF)] is indicated for the prophylaxis of organ rejection, in adult and pediatric recipients 3 months of age and older of allogeneic kidney [see Clinical Studies (14.1)], heart [see Clinical Studies (14.2)] or liver transplants [see Clinical Studies (14.3)], in combination with other immunosuppressants.",
"Description": "CELLCEPT (mycophenolate mofetil) is an antimetabolite immunosuppressant. It is the 2-morpholinoethyl ester of mycophenolic acid (MPA), an immunosuppressive agent; inosine monophosphate dehydrogenase (IMPDH) inhibitor. The chemical name for mycophenolate mofetil (MMF) is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate. It has an empirical formula of C23H31NO7, a molecular weight of 433.50, and the following structural formula. MMF is a white to off-white crystalline powder. It is slightly soluble in water (43 µg/mL at pH 7.4); the solubility increases in acidic medium (4.27 mg/mL at pH 3.6). It is freely soluble in acetone, soluble in methanol, and sparingly soluble in ethanol. The apparent partition coefficient in 1-octanol/water (pH 7.4) buffer solution is 238. The pKa values for MMF are 5.6 for the morpholino group and 8.5 for the phenolic group. MMF hydrochloride has a solubility of 65.8 mg/mL in 5% Dextrose Injection USP (D5W). The pH of the reconstituted solution is 2.4 to 4.1. CELLCEPT is available for oral administration as capsules containing 250 mg of MMF, tablets containing 500 mg of MMF, and as a powder for oral suspension which, when reconstituted, contains 200 mg/mL of MMF. Inactive ingredients in CELLCEPT 250 mg capsules include croscarmellose sodium, magnesium stearate, povidone (K-90) and pregelatinized starch. The capsule shells contain black iron oxide, FD&C blue #2, gelatin, red iron oxide, silicon dioxide, sodium lauryl sulfate, titanium dioxide, and yellow iron oxide. Inactive ingredients in CELLCEPT 500 mg tablets include croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone (K-90), and Opadry® lavender Y-5R-10272-A (hydroxypropyl methylcellulose, hydroxypropyl cellulose, titanium dioxide, polyethylene glycol 400, FD&C Blue No. 2 aluminum lake [indigo carmine aluminum lake], and red iron oxide). Inactive ingredients in CELLCEPT Oral Suspension include aspartame, citric acid anhydrous, colloidal silicon dioxide, methylparaben, mixed fruit flavor, sodium citrate dihydrate, sorbitol, soybean lecithin, and xanthan gum. CELLCEPT Intravenous is the hydrochloride salt of MMF. The chemical name for the hydrochloride salt of MMF is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate hydrochloride. It has an empirical formula of C23H31NO7 HCl and a molecular weight of 469.96. CELLCEPT Intravenous is available as a sterile white to off-white lyophilized powder in single-dose vials containing MMF hydrochloride for administration by intravenous infusion only. Each vial contains 500 mg of mycophenolate mofetil equivalent to 542 mg of mycophenolate mofetil hydrochloride. The inactive ingredients are polysorbate 80, 25 mg, and citric acid, 5 mg. Sodium hydroxide or hydrochloric acid may have been used in the manufacture of CELLCEPT Intravenous to adjust the pH. Reconstitution and dilution with 5% Dextrose Injection USP yields a slightly yellow solution of MMF, 6 mg/mL [see Dosage and Administration (2.6)]."
},
{
"NDCCode": "0004-0298-09",
"PackageDescription": "4 VIAL in 1 CARTON (0004-0298-09) / 20 mL in 1 VIAL",
"NDC11Code": "00004-0298-09",
"ProductNDC": "0004-0298",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cellcept",
"NonProprietaryName": "Mycophenolate Mofetil Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19980812",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050758",
"LabelerName": "Genentech, Inc.",
"SubstanceName": "MYCOPHENOLATE MOFETIL HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/20mL",
"Pharm_Classes": "Antimetabolite Immunosuppressant [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19980812",
"SamplePackage": "N",
"IndicationAndUsage": "CELLCEPT [mycophenolate mofetil (MMF)] is indicated for the prophylaxis of organ rejection, in adult and pediatric recipients 3 months of age and older of allogeneic kidney [see Clinical Studies (14.1)], heart [see Clinical Studies (14.2)] or liver transplants [see Clinical Studies (14.3)], in combination with other immunosuppressants.",
"Description": "CELLCEPT (mycophenolate mofetil) is an antimetabolite immunosuppressant. It is the 2-morpholinoethyl ester of mycophenolic acid (MPA), an immunosuppressive agent; inosine monophosphate dehydrogenase (IMPDH) inhibitor. The chemical name for mycophenolate mofetil (MMF) is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate. It has an empirical formula of C23H31NO7, a molecular weight of 433.50, and the following structural formula. MMF is a white to off-white crystalline powder. It is slightly soluble in water (43 µg/mL at pH 7.4); the solubility increases in acidic medium (4.27 mg/mL at pH 3.6). It is freely soluble in acetone, soluble in methanol, and sparingly soluble in ethanol. The apparent partition coefficient in 1-octanol/water (pH 7.4) buffer solution is 238. The pKa values for MMF are 5.6 for the morpholino group and 8.5 for the phenolic group. MMF hydrochloride has a solubility of 65.8 mg/mL in 5% Dextrose Injection USP (D5W). The pH of the reconstituted solution is 2.4 to 4.1. CELLCEPT is available for oral administration as capsules containing 250 mg of MMF, tablets containing 500 mg of MMF, and as a powder for oral suspension which, when reconstituted, contains 200 mg/mL of MMF. Inactive ingredients in CELLCEPT 250 mg capsules include croscarmellose sodium, magnesium stearate, povidone (K-90) and pregelatinized starch. The capsule shells contain black iron oxide, FD&C blue #2, gelatin, red iron oxide, silicon dioxide, sodium lauryl sulfate, titanium dioxide, and yellow iron oxide. Inactive ingredients in CELLCEPT 500 mg tablets include croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone (K-90), and Opadry® lavender Y-5R-10272-A (hydroxypropyl methylcellulose, hydroxypropyl cellulose, titanium dioxide, polyethylene glycol 400, FD&C Blue No. 2 aluminum lake [indigo carmine aluminum lake], and red iron oxide). Inactive ingredients in CELLCEPT Oral Suspension include aspartame, citric acid anhydrous, colloidal silicon dioxide, methylparaben, mixed fruit flavor, sodium citrate dihydrate, sorbitol, soybean lecithin, and xanthan gum. CELLCEPT Intravenous is the hydrochloride salt of MMF. The chemical name for the hydrochloride salt of MMF is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate hydrochloride. It has an empirical formula of C23H31NO7 HCl and a molecular weight of 469.96. CELLCEPT Intravenous is available as a sterile white to off-white lyophilized powder in single-dose vials containing MMF hydrochloride for administration by intravenous infusion only. Each vial contains 500 mg of mycophenolate mofetil equivalent to 542 mg of mycophenolate mofetil hydrochloride. The inactive ingredients are polysorbate 80, 25 mg, and citric acid, 5 mg. Sodium hydroxide or hydrochloric acid may have been used in the manufacture of CELLCEPT Intravenous to adjust the pH. Reconstitution and dilution with 5% Dextrose Injection USP yields a slightly yellow solution of MMF, 6 mg/mL [see Dosage and Administration (2.6)]."
},
{
"NDCCode": "0054-0936-21",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (0054-0936-21) ",
"NDC11Code": "00054-0936-21",
"ProductNDC": "0054-0936",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tapentadol",
"NonProprietaryName": "Tapentadol Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20251215",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA200533",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "TAPENTADOL HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Opioid Agonist [EPC], Opioid Agonists [MoA]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251215",
"SamplePackage": "N",
"IndicationAndUsage": "Tapentadol extended-release tablets are indicated for the management of: 1 Severe and persistent pain in adults that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate., 2 Severe and persistent neuropathic pain associated with diabetic peripheral neuropathy (DPN) in adults that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate.",
"Description": "Tapentadol extended-release tablet is an opioid agonist, supplied in extended-release film-coated tablets for oral administration, containing 58.24, 116.48, 174.72, 232.96, and 291.20 mg of tapentadol hydrochloride in each tablet strength, corresponding to 50, 100, 150, 200, and 250 mg of tapentadol free-base, respectively. The chemical name is 3-[(1R,2R)-3-(dimethylamino)-1-ethyl-2-methylpropyl]phenol monohydrochloride. The structural formula is. The molecular weight of tapentadol HCl is 257.80, and the molecular formula is C14H23NOHCl. The n-octanol: water partition coefficient log P value is 2.89. The pKa values are 9.36 and 10.45. In addition to the active ingredient tapentadol HCl, tablets also contain the following inactive ingredients: alpha-tocopherol (vitamin E), hypromellose, polyethylene glycol, and polyethylene oxide. The film coating is comprised of polyvinyl alcohol, polyethylene glycol, talc, titanium dioxide, and the colorant FD&C Blue #2 aluminum lake is used for 100, 150, 200, and 250 mg strengths; and additionally, yellow iron oxide is used in 150 mg tablets. Printing inks contain shellac glaze and propylene glycol for all strengths, and black iron oxide (50, 100, 150 and 200 mg tablets) or titanium dioxide (250 mg tablets)."
},
{
"NDCCode": "0054-0937-21",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (0054-0937-21) ",
"NDC11Code": "00054-0937-21",
"ProductNDC": "0054-0937",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tapentadol",
"NonProprietaryName": "Tapentadol Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20251215",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA200533",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "TAPENTADOL HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Opioid Agonist [EPC], Opioid Agonists [MoA]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251215",
"SamplePackage": "N",
"IndicationAndUsage": "Tapentadol extended-release tablets are indicated for the management of: 1 Severe and persistent pain in adults that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate., 2 Severe and persistent neuropathic pain associated with diabetic peripheral neuropathy (DPN) in adults that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate.",
"Description": "Tapentadol extended-release tablet is an opioid agonist, supplied in extended-release film-coated tablets for oral administration, containing 58.24, 116.48, 174.72, 232.96, and 291.20 mg of tapentadol hydrochloride in each tablet strength, corresponding to 50, 100, 150, 200, and 250 mg of tapentadol free-base, respectively. The chemical name is 3-[(1R,2R)-3-(dimethylamino)-1-ethyl-2-methylpropyl]phenol monohydrochloride. The structural formula is. The molecular weight of tapentadol HCl is 257.80, and the molecular formula is C14H23NOHCl. The n-octanol: water partition coefficient log P value is 2.89. The pKa values are 9.36 and 10.45. In addition to the active ingredient tapentadol HCl, tablets also contain the following inactive ingredients: alpha-tocopherol (vitamin E), hypromellose, polyethylene glycol, and polyethylene oxide. The film coating is comprised of polyvinyl alcohol, polyethylene glycol, talc, titanium dioxide, and the colorant FD&C Blue #2 aluminum lake is used for 100, 150, 200, and 250 mg strengths; and additionally, yellow iron oxide is used in 150 mg tablets. Printing inks contain shellac glaze and propylene glycol for all strengths, and black iron oxide (50, 100, 150 and 200 mg tablets) or titanium dioxide (250 mg tablets)."
},
{
"NDCCode": "0054-0938-21",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (0054-0938-21) ",
"NDC11Code": "00054-0938-21",
"ProductNDC": "0054-0938",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tapentadol",
"NonProprietaryName": "Tapentadol Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20251215",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA200533",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "TAPENTADOL HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Opioid Agonist [EPC], Opioid Agonists [MoA]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251215",
"SamplePackage": "N",
"IndicationAndUsage": "Tapentadol extended-release tablets are indicated for the management of: 1 Severe and persistent pain in adults that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate., 2 Severe and persistent neuropathic pain associated with diabetic peripheral neuropathy (DPN) in adults that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate.",
"Description": "Tapentadol extended-release tablet is an opioid agonist, supplied in extended-release film-coated tablets for oral administration, containing 58.24, 116.48, 174.72, 232.96, and 291.20 mg of tapentadol hydrochloride in each tablet strength, corresponding to 50, 100, 150, 200, and 250 mg of tapentadol free-base, respectively. The chemical name is 3-[(1R,2R)-3-(dimethylamino)-1-ethyl-2-methylpropyl]phenol monohydrochloride. The structural formula is. The molecular weight of tapentadol HCl is 257.80, and the molecular formula is C14H23NOHCl. The n-octanol: water partition coefficient log P value is 2.89. The pKa values are 9.36 and 10.45. In addition to the active ingredient tapentadol HCl, tablets also contain the following inactive ingredients: alpha-tocopherol (vitamin E), hypromellose, polyethylene glycol, and polyethylene oxide. The film coating is comprised of polyvinyl alcohol, polyethylene glycol, talc, titanium dioxide, and the colorant FD&C Blue #2 aluminum lake is used for 100, 150, 200, and 250 mg strengths; and additionally, yellow iron oxide is used in 150 mg tablets. Printing inks contain shellac glaze and propylene glycol for all strengths, and black iron oxide (50, 100, 150 and 200 mg tablets) or titanium dioxide (250 mg tablets)."
},
{
"NDCCode": "0054-0939-21",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (0054-0939-21) ",
"NDC11Code": "00054-0939-21",
"ProductNDC": "0054-0939",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tapentadol",
"NonProprietaryName": "Tapentadol Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20251215",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA200533",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "TAPENTADOL HYDROCHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Opioid Agonist [EPC], Opioid Agonists [MoA]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251215",
"SamplePackage": "N",
"IndicationAndUsage": "Tapentadol extended-release tablets are indicated for the management of: 1 Severe and persistent pain in adults that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate., 2 Severe and persistent neuropathic pain associated with diabetic peripheral neuropathy (DPN) in adults that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate.",
"Description": "Tapentadol extended-release tablet is an opioid agonist, supplied in extended-release film-coated tablets for oral administration, containing 58.24, 116.48, 174.72, 232.96, and 291.20 mg of tapentadol hydrochloride in each tablet strength, corresponding to 50, 100, 150, 200, and 250 mg of tapentadol free-base, respectively. The chemical name is 3-[(1R,2R)-3-(dimethylamino)-1-ethyl-2-methylpropyl]phenol monohydrochloride. The structural formula is. The molecular weight of tapentadol HCl is 257.80, and the molecular formula is C14H23NOHCl. The n-octanol: water partition coefficient log P value is 2.89. The pKa values are 9.36 and 10.45. In addition to the active ingredient tapentadol HCl, tablets also contain the following inactive ingredients: alpha-tocopherol (vitamin E), hypromellose, polyethylene glycol, and polyethylene oxide. The film coating is comprised of polyvinyl alcohol, polyethylene glycol, talc, titanium dioxide, and the colorant FD&C Blue #2 aluminum lake is used for 100, 150, 200, and 250 mg strengths; and additionally, yellow iron oxide is used in 150 mg tablets. Printing inks contain shellac glaze and propylene glycol for all strengths, and black iron oxide (50, 100, 150 and 200 mg tablets) or titanium dioxide (250 mg tablets)."
},
{
"NDCCode": "0054-0940-21",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (0054-0940-21) ",
"NDC11Code": "00054-0940-21",
"ProductNDC": "0054-0940",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tapentadol",
"NonProprietaryName": "Tapentadol Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20251215",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA200533",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "TAPENTADOL HYDROCHLORIDE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Opioid Agonist [EPC], Opioid Agonists [MoA]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251215",
"SamplePackage": "N",
"IndicationAndUsage": "Tapentadol extended-release tablets are indicated for the management of: 1 Severe and persistent pain in adults that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate., 2 Severe and persistent neuropathic pain associated with diabetic peripheral neuropathy (DPN) in adults that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate.",
"Description": "Tapentadol extended-release tablet is an opioid agonist, supplied in extended-release film-coated tablets for oral administration, containing 58.24, 116.48, 174.72, 232.96, and 291.20 mg of tapentadol hydrochloride in each tablet strength, corresponding to 50, 100, 150, 200, and 250 mg of tapentadol free-base, respectively. The chemical name is 3-[(1R,2R)-3-(dimethylamino)-1-ethyl-2-methylpropyl]phenol monohydrochloride. The structural formula is. The molecular weight of tapentadol HCl is 257.80, and the molecular formula is C14H23NOHCl. The n-octanol: water partition coefficient log P value is 2.89. The pKa values are 9.36 and 10.45. In addition to the active ingredient tapentadol HCl, tablets also contain the following inactive ingredients: alpha-tocopherol (vitamin E), hypromellose, polyethylene glycol, and polyethylene oxide. The film coating is comprised of polyvinyl alcohol, polyethylene glycol, talc, titanium dioxide, and the colorant FD&C Blue #2 aluminum lake is used for 100, 150, 200, and 250 mg strengths; and additionally, yellow iron oxide is used in 150 mg tablets. Printing inks contain shellac glaze and propylene glycol for all strengths, and black iron oxide (50, 100, 150 and 200 mg tablets) or titanium dioxide (250 mg tablets)."
},
{
"NDCCode": "0228-2539-96",
"PackageDescription": "1000 TABLET in 1 BOTTLE (0228-2539-96) ",
"NDC11Code": "00228-2539-96",
"ProductNDC": "0228-2539",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carbidopa And Levodopa",
"NonProprietaryName": "Carbidopa And Levodopa",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19930901",
"EndMarketingDate": "20241130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074260",
"LabelerName": "Actavis Pharma, Inc.",
"SubstanceName": "CARBIDOPA; LEVODOPA",
"StrengthNumber": "25; 100",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Amino Acids, Aromatic [CS], Aromatic Amino Acid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-11-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19930901",
"EndMarketingDatePackage": "20241031",
"SamplePackage": "N",
"IndicationAndUsage": "Carbidopa and levodopa tablets are indicated in the treatment of Parkinson's disease, post-encephalitic parkinsonism, and symptomatic parkinsonism that may follow carbon monoxide intoxication or manganese intoxication. Carbidopa allows patients treated for Parkinson's disease to use much lower doses of levodopa. Some patients who responded poorly to levodopa have improved on carbidopa and levodopa. This is most likely due to decreased peripheral decarboxylation of levodopa caused by administration of carbidopa rather than by a primary effect of carbidopa on the nervous system. Carbidopa has not been shown to enhance the intrinsic efficacy of levodopa. Carbidopa may also reduce nausea and vomiting and permit more rapid titration of levodopa.",
"Description": "Carbidopa and levodopa tablets, USP are a combination product for the treatment of Parkinson's disease and syndrome. Carbidopa, USP an inhibitor of aromatic amino acid decarboxylation, is a white, crystalline compound, slightly soluble in water, with a molecular weight of 244.24. It is designated chemically as (-)-L-α-hydrazino-α-methyl-β-(3,4-dihydroxybenzene) propanoic acid monohydrate. Its molecular formula is C10H14N2O4H2O, and its structural formula is. Tablet content is expressed in terms of anhydrous carbidopa which has a molecular weight of 226.23. Levodopa, USP an aromatic amino acid, is a white, crystalline compound, slightly soluble in water, with a molecular weight of 197.19. It is designated chemically as (-)-L-α-amino-β-(3,4-dihydroxybenzene) propanoic acid. Its molecular formula is C9H11NO4, and its structural formula is. Carbidopa and Levodopa Tablets, USP for oral administration, are supplied in three strengths. 10 mg/100 mg, containing 10 mg of carbidopa, USP and 100 mg of levodopa, USP. 25 mg/100 mg, containing 25 mg of carbidopa, USP and 100 mg of levodopa, USP. 25 mg/250 mg, containing 25 mg of carbidopa, USP and 250 mg of levodopa, USP. In addition, each tablet contains the following inactive ingredients: corn starch, magnesium stearate, microcrystalline cellulose, pregelatinized starch (maize). In addition, the 25 mg/100 mg strength contain D&C yellow #10 aluminum lake and FD&C yellow #6 aluminum lake (sunset yellow lake). The 10 mg/100 mg and 25 mg/250 mg strengths contain FD&C blue #2 aluminum lake."
},
{
"NDCCode": "0228-2540-96",
"PackageDescription": "1000 TABLET in 1 BOTTLE (0228-2540-96) ",
"NDC11Code": "00228-2540-96",
"ProductNDC": "0228-2540",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carbidopa And Levodopa",
"NonProprietaryName": "Carbidopa And Levodopa",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19930901",
"EndMarketingDate": "20260531",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074260",
"LabelerName": "Actavis Pharma, Inc.",
"SubstanceName": "CARBIDOPA; LEVODOPA",
"StrengthNumber": "25; 250",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Amino Acids, Aromatic [CS], Aromatic Amino Acid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19930901",
"EndMarketingDatePackage": "20260531",
"SamplePackage": "N",
"IndicationAndUsage": "Carbidopa and levodopa tablets are indicated in the treatment of Parkinson's disease, post-encephalitic parkinsonism, and symptomatic parkinsonism that may follow carbon monoxide intoxication or manganese intoxication. Carbidopa allows patients treated for Parkinson's disease to use much lower doses of levodopa. Some patients who responded poorly to levodopa have improved on carbidopa and levodopa. This is most likely due to decreased peripheral decarboxylation of levodopa caused by administration of carbidopa rather than by a primary effect of carbidopa on the nervous system. Carbidopa has not been shown to enhance the intrinsic efficacy of levodopa. Carbidopa may also reduce nausea and vomiting and permit more rapid titration of levodopa.",
"Description": "Carbidopa and levodopa tablets, USP are a combination product for the treatment of Parkinson's disease and syndrome. Carbidopa, USP an inhibitor of aromatic amino acid decarboxylation, is a white, crystalline compound, slightly soluble in water, with a molecular weight of 244.24. It is designated chemically as (-)-L-α-hydrazino-α-methyl-β-(3,4-dihydroxybenzene) propanoic acid monohydrate. Its molecular formula is C10H14N2O4H2O, and its structural formula is. Tablet content is expressed in terms of anhydrous carbidopa which has a molecular weight of 226.23. Levodopa, USP an aromatic amino acid, is a white, crystalline compound, slightly soluble in water, with a molecular weight of 197.19. It is designated chemically as (-)-L-α-amino-β-(3,4-dihydroxybenzene) propanoic acid. Its molecular formula is C9H11NO4, and its structural formula is. Carbidopa and Levodopa Tablets, USP for oral administration, are supplied in three strengths. 10 mg/100 mg, containing 10 mg of carbidopa, USP and 100 mg of levodopa, USP. 25 mg/100 mg, containing 25 mg of carbidopa, USP and 100 mg of levodopa, USP. 25 mg/250 mg, containing 25 mg of carbidopa, USP and 250 mg of levodopa, USP. In addition, each tablet contains the following inactive ingredients: corn starch, magnesium stearate, microcrystalline cellulose, pregelatinized starch (maize). In addition, the 25 mg/100 mg strength contain D&C yellow #10 aluminum lake and FD&C yellow #6 aluminum lake (sunset yellow lake). The 10 mg/100 mg and 25 mg/250 mg strengths contain FD&C blue #2 aluminum lake."
},
{
"NDCCode": "0264-1943-20",
"PackageDescription": "12 CONTAINER in 1 CASE (0264-1943-20) > 250 mL in 1 CONTAINER",
"NDC11Code": "00264-1943-20",
"ProductNDC": "0264-1943",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hyperlyte",
"ProprietaryNameSuffix": "Cr",
"NonProprietaryName": "Multi Electrolyte Concentrate",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20120412",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "POTASSIUM ACETATE; SODIUM CHLORIDE; SODIUM ACETATE; MAGNESIUM CHLORIDE; CALCIUM CHLORIDE",
"StrengthNumber": "1.96; 1.17; .68; .51; .37",
"StrengthUnit": "g/20mL; g/20mL; g/20mL; g/20mL; g/20mL",
"Pharm_Classes": "Potassium Compounds [CS],Potassium Salt [EPC],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Calculi Dissolution Agent [EPC],Magnesium Ion Exchange Activity [MoA],Osmotic Laxative [EPC],Osmotic Activity [MoA],Inhibition Small Intestine Fluid/Electrolyte Absorption [PE],Increased Large Intestinal Motility [PE],Stimulation Large Intestine Fluid/Electrolyte Secretion [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Blood Coagulation Factor [EPC],Increased Coagulation Factor Activity [PE],Calcium [CS],Cations, Divalent [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20120412",
"SamplePackage": "N"
},
{
"NDCCode": "0486-1125-01",
"PackageDescription": "100 TABLET, COATED in 1 BOTTLE (0486-1125-01) ",
"NDC11Code": "00486-1125-01",
"ProductNDC": "0486-1125",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "K Phos",
"ProprietaryNameSuffix": "Neutral",
"NonProprietaryName": "Sodium Phosphate, Dibasic, Anhydrous, Potassium Phosphate, Monobasic, And Sodium Phosphate, Monobasic, Monohydrate",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19770411",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Beach Products, Inc.",
"SubstanceName": "SODIUM PHOSPHATE, DIBASIC, ANHYDROUS; POTASSIUM PHOSPHATE, MONOBASIC; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE",
"StrengthNumber": "852; 155; 130",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Status": "Active",
"LastUpdate": "2023-03-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19770411",
"SamplePackage": "N",
"IndicationAndUsage": "K-PHOS® NEUTRAL increases urinary phosphate and pyrophosphate. As a phosphorus supplement, each tablet supplies 25% of the U.S. Recommended Daily Allowance (U.S.RDA) of phosphorus for adul t s and children over 4 years of age.",
"Description": "Each tablet contains 852 mg dibasic sodium phosphate anhydrous, 155 mg monobasic potassium phosphate, and the equivalent of 130 mg monobasic sodium phosphate monohydrate. Each tablet yields approximately 250 mg of phosphorus, 298 mg of sodium (13.0 mEq) and 45 mg of potassium (1.1 mEq). The components of K-PHOS® NEUTRAL have the following chemical names and molecular formulae. Dibasic Sodium Phosphate, Anhydrous Molecular Formula: Na2HPO4, Molecular Weight: 141.96. Monobasic Potassium Phosphate Molecular Formula: KH2PO4, Molecular Weight: 136.09. Monobasic Sodium Phosphate, Monohydrate Molecular Formula:NaH2PO4.H2O, Molecular Weight: 137.98. Inactive Ingredients: Lactose monohydrate, povidone, white coating (hydroxypropyl methylcellulose, titanium dioxide, maltodextrin, triacetin, glycerol triacetate, polyethylene glycol, sodium citrate, and stearic acid), sodium starch glycolate, and magnesium stearate."
},
{
"NDCCode": "0486-1125-05",
"PackageDescription": "500 TABLET, COATED in 1 BOTTLE (0486-1125-05) ",
"NDC11Code": "00486-1125-05",
"ProductNDC": "0486-1125",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "K Phos",
"ProprietaryNameSuffix": "Neutral",
"NonProprietaryName": "Sodium Phosphate, Dibasic, Anhydrous, Potassium Phosphate, Monobasic, And Sodium Phosphate, Monobasic, Monohydrate",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19770411",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Beach Products, Inc.",
"SubstanceName": "SODIUM PHOSPHATE, DIBASIC, ANHYDROUS; POTASSIUM PHOSPHATE, MONOBASIC; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE",
"StrengthNumber": "852; 155; 130",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Status": "Active",
"LastUpdate": "2023-03-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19770411",
"SamplePackage": "N",
"IndicationAndUsage": "K-PHOS® NEUTRAL increases urinary phosphate and pyrophosphate. As a phosphorus supplement, each tablet supplies 25% of the U.S. Recommended Daily Allowance (U.S.RDA) of phosphorus for adul t s and children over 4 years of age.",
"Description": "Each tablet contains 852 mg dibasic sodium phosphate anhydrous, 155 mg monobasic potassium phosphate, and the equivalent of 130 mg monobasic sodium phosphate monohydrate. Each tablet yields approximately 250 mg of phosphorus, 298 mg of sodium (13.0 mEq) and 45 mg of potassium (1.1 mEq). The components of K-PHOS® NEUTRAL have the following chemical names and molecular formulae. Dibasic Sodium Phosphate, Anhydrous Molecular Formula: Na2HPO4, Molecular Weight: 141.96. Monobasic Potassium Phosphate Molecular Formula: KH2PO4, Molecular Weight: 136.09. Monobasic Sodium Phosphate, Monohydrate Molecular Formula:NaH2PO4.H2O, Molecular Weight: 137.98. Inactive Ingredients: Lactose monohydrate, povidone, white coating (hydroxypropyl methylcellulose, titanium dioxide, maltodextrin, triacetin, glycerol triacetate, polyethylene glycol, sodium citrate, and stearic acid), sodium starch glycolate, and magnesium stearate."
},
{
"NDCCode": "0527-1931-06",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (0527-1931-06) ",
"NDC11Code": "00527-1931-06",
"ProductNDC": "0527-1931",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clarithromycin",
"NonProprietaryName": "Clarithromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20191123",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203584",
"LabelerName": "Lannett Company, Inc.",
"SubstanceName": "CLARITHROMYCIN",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Macrolide Antimicrobial [EPC], Macrolides [CS], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-11-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191123",
"SamplePackage": "N",
"Description": "Clarithromycin is a semi-synthetic macrolide antimicrobial for oral use. Chemically, it is 6- 0-methylerythromycin. The molecular formula is C 38H 69NO 13, and the molecular weight is 747.96. The structural formula is:. Figure 1: Structure of Clarithromycin. Clarithromycin is a white to off-white crystalline powder. It is soluble in acetone, slightly soluble in methanol, ethanol, and acetonitrile, and practically insoluble in water. Each white to off-white oval film-coated immediate-release clarithromycin tablet, USP contains 250 mg or 500 mg of clarithromycin and the following inactive ingredients: croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide, hypromellose, titanium dioxide and polyethylene glycol."
},
{
"NDCCode": "0527-1932-06",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (0527-1932-06) ",
"NDC11Code": "00527-1932-06",
"ProductNDC": "0527-1932",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clarithromycin",
"NonProprietaryName": "Clarithromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20191123",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203584",
"LabelerName": "Lannett Company, Inc.",
"SubstanceName": "CLARITHROMYCIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Macrolide Antimicrobial [EPC], Macrolides [CS], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-11-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191123",
"SamplePackage": "N",
"Description": "Clarithromycin is a semi-synthetic macrolide antimicrobial for oral use. Chemically, it is 6- 0-methylerythromycin. The molecular formula is C 38H 69NO 13, and the molecular weight is 747.96. The structural formula is:. Figure 1: Structure of Clarithromycin. Clarithromycin is a white to off-white crystalline powder. It is soluble in acetone, slightly soluble in methanol, ethanol, and acetonitrile, and practically insoluble in water. Each white to off-white oval film-coated immediate-release clarithromycin tablet, USP contains 250 mg or 500 mg of clarithromycin and the following inactive ingredients: croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide, hypromellose, titanium dioxide and polyethylene glycol."
},
{
"NDCCode": "0574-4135-05",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (0574-4135-05) / 5 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "00574-4135-05",
"ProductNDC": "0574-4135",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Loteprednol Etabonate",
"NonProprietaryName": "Loteprednol Etabonate",
"DosageFormName": "SUSPENSION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20260112",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215204",
"LabelerName": "Padagis US LLC",
"SubstanceName": "LOTEPREDNOL ETABONATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260112",
"SamplePackage": "N",
"IndicationAndUsage": "Loteprednol etabonate ophthalmic suspension is indicated for the treatment of steroid responsive inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe such as allergic conjunctivitis, acne rosacea, superficial punctate keratitis, herpes zoster keratitis, iritis, cyclitis, selected infective conjunctivitides, when the inherent hazard of steroid use is accepted to obtain an advisable diminution in edema and inflammation. Loteprednol etabonate ophthalmic suspension is less effective than prednisolone acetate 1% in two 28-day controlled clinical studies in acute anterior uveitis, where 72% of patients treated with loteprednol etabonate ophthalmic suspension experienced resolution of anterior chamber cells, compared to 87% of patients treated with prednisolone acetate 1%. The incidence of patients with clinically significant increases in IOP (≥10 mmHg) was 1% with loteprednol etabonate ophthalmic suspension and 6% with prednisolone acetate 1%. Loteprednol etabonate ophthalmic suspension should not be used in patients who require a more potent corticosteroid for this indication. Loteprednol etabonate ophthalmic suspension is also indicated for the treatment of post-operative inflammation following ocular surgery.",
"Description": "Loteprednol etabonate ophthalmic suspension contains a sterile, topical anti-inflammatory corticosteroid for ophthalmic use. Loteprednol etabonate is a white to off-white powder. Loteprednol etabonate is represented by the following structural formula. C24H31ClO7Mol. Wt. 466.96. Chemical name: chloromethyl 17α-[(ethoxycarbonyl)oxy]-11β-hydroxy-3-oxoandrosta-1,4-diene-17β-carboxylate. Each mL contains. ACTIVE: Loteprednol Etabonate 5 mg (0.5%);. INACTIVES: Edetate Disodium, Glycerin, Povidone, Tyloxapol, and Water for Injection. Hydrochloric Acid and/or Sodium Hydroxide may be added to adjust the pH to 5.3-5.6. The suspension is essentially isotonic with a tonicity of 250 to 310 mOsmol/kg. PRESERVATIVE ADDED: Benzalkonium Chloride 0.01%."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>71921-250-96</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (71921-250-96) / 96 TABLET, COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>71921-0250-96</NDC11Code>
<ProductNDC>71921-250</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lofexidine</ProprietaryName>
<NonProprietaryName>Lofexidine</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240821</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218613</ApplicationNumber>
<LabelerName>Florida Pharmaceutical Products, LLC</LabelerName>
<SubstanceName>LOFEXIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.18</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-05-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240821</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lofexidine tablets are indicated for mitigation of opioid withdrawal symptoms to facilitate abrupt opioid discontinuation in adults.</IndicationAndUsage>
<Description>Lofexidine tablets contain lofexidine, a central alpha-2 adrenergic agonist, as the hydrochloride salt. Lofexidine hydrochloride is chemically designated as 2-[1-(2,6-dichlorophenoxy)ethyl]-4,5 dihydro-1H- imidazole monohydrochloride with a molecular formula of C11H12Cl2N2OHCl. Its molecular weight is 295.6 g/mole and its structural formula is. Lofexidine hydrochloride is a white to off-white crystalline powder freely soluble in water, methanol, and ethanol. It is slightly soluble in chloroform and practically insoluble in n-hexane and benzene. Lofexidine tablets are available as round, concave-shaped, peach-colored, film-coated tablets, debossed with “C” on one side and “71” on other side for oral administration. Each tablet contains 0.18 lofexidine, equivalent to 0.2 mg of lofexidine hydrochloride and the following inactive ingredients: 87 mg lactose monohydrate, 12.3 mg citric acid monohydrate, 5.7 mg microcrystalline cellulose, 1.1 mg povidone K-30, 0.70 mg sodium lauryl sulphate, 5.0 mg sodium starch glycolate, 2.0 mg calcium stearate and Opadry AMB II orange 88A530003 (contains polyvinyl alcohol, talc, titanium dioxide, Glyceryl mono and dicaprylocaprate, sodium lauryl sulfate, FD&C yellow #6/sunset yellow FCF aluminum lake and FD&C blue #2/indigo carmine aluminium lake).</Description>
</NDC>
<NDC>
<NDCCode>49035-563-96</NDCCode>
<PackageDescription>2 BOTTLE, PLASTIC in 1 CARTON (49035-563-96) / 250 TABLET, DELAYED RELEASE in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>49035-0563-96</NDC11Code>
<ProductNDC>49035-563</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Low Dose Aspirin</ProprietaryName>
<NonProprietaryName>Aspirin</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110501</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M013</ApplicationNumber>
<LabelerName>Wal-Mart Stores Inc</LabelerName>
<SubstanceName>ASPIRIN</SubstanceName>
<StrengthNumber>81</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Platelet Aggregation [PE], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC], Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>for the temporary relief of minor aches and pains or as recommended by your doctor. Because of its delayed action, this product will not provide fast relief of headaches or other symptoms needing immediate relief.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>71921-150-25</NDCCode>
<PackageDescription>250 TABLET in 1 BOTTLE (71921-150-25) </PackageDescription>
<NDC11Code>71921-0150-25</NDC11Code>
<ProductNDC>71921-150</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mercaptopurine</ProprietaryName>
<NonProprietaryName>Mercaptopurine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260130</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA009053</ApplicationNumber>
<LabelerName>Florida Pharmaceutical Products, LLC</LabelerName>
<SubstanceName>MERCAPTOPURINE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mercaptopurine tablets is a nucleoside metabolic inhibitor indicated for treatment of adult and pediatric patients with acute lymphoblastic leukemia (ALL) as part of a combination chemotherapy maintenance regimen. (1.1).</IndicationAndUsage>
<Description>Mercaptopurine is a nucleoside metabolic inhibitor, the chemical name is 6H-purine-6-thione, 1,7-dihydro-, monohydrate. The molecular formula is C5H4N4S H2O and the molecular weight is 170.20. Its structural formula is. Mercaptopurine is a yellow, crystalline powder. Mercaptopurine is practically insoluble in water and in ether. It has a pKa of 7.8, an average tapped density of 1.0 g/mL and average bulk density of 0.85 g/mL. It dissolves in solutions of alkali hydroxides.Mercaptopurine tablets is available for oral use. Each scored tablet contains 50 mg mercaptopurine and the following inactive ingredients: corn starch, pregelatinized, potato starch, lactose, magnesium stearate and stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>71921-250-36</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (71921-250-36) / 36 TABLET, COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>71921-0250-36</NDC11Code>
<ProductNDC>71921-250</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lofexidine</ProprietaryName>
<NonProprietaryName>Lofexidine</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240821</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218613</ApplicationNumber>
<LabelerName>Florida Pharmaceutical Products, LLC</LabelerName>
<SubstanceName>LOFEXIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.18</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-05-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240821</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lofexidine tablets are indicated for mitigation of opioid withdrawal symptoms to facilitate abrupt opioid discontinuation in adults.</IndicationAndUsage>
<Description>Lofexidine tablets contain lofexidine, a central alpha-2 adrenergic agonist, as the hydrochloride salt. Lofexidine hydrochloride is chemically designated as 2-[1-(2,6-dichlorophenoxy)ethyl]-4,5 dihydro-1H- imidazole monohydrochloride with a molecular formula of C11H12Cl2N2OHCl. Its molecular weight is 295.6 g/mole and its structural formula is. Lofexidine hydrochloride is a white to off-white crystalline powder freely soluble in water, methanol, and ethanol. It is slightly soluble in chloroform and practically insoluble in n-hexane and benzene. Lofexidine tablets are available as round, concave-shaped, peach-colored, film-coated tablets, debossed with “C” on one side and “71” on other side for oral administration. Each tablet contains 0.18 lofexidine, equivalent to 0.2 mg of lofexidine hydrochloride and the following inactive ingredients: 87 mg lactose monohydrate, 12.3 mg citric acid monohydrate, 5.7 mg microcrystalline cellulose, 1.1 mg povidone K-30, 0.70 mg sodium lauryl sulphate, 5.0 mg sodium starch glycolate, 2.0 mg calcium stearate and Opadry AMB II orange 88A530003 (contains polyvinyl alcohol, talc, titanium dioxide, Glyceryl mono and dicaprylocaprate, sodium lauryl sulfate, FD&C yellow #6/sunset yellow FCF aluminum lake and FD&C blue #2/indigo carmine aluminium lake).</Description>
</NDC>
<NDC>
<NDCCode>71921-178-20</NDCCode>
<PackageDescription>120 TABLET in 1 BOTTLE (71921-178-20) </PackageDescription>
<NDC11Code>71921-0178-20</NDC11Code>
<ProductNDC>71921-178</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Abiraterone Acetate</ProprietaryName>
<NonProprietaryName>Abiraterone Acetate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212462</ApplicationNumber>
<LabelerName>Florida Pharmaceutical Products, LLC.</LabelerName>
<SubstanceName>ABIRATERONE ACETATE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 17A1 Inhibitor [EPC], Cytochrome P450 17A1 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-05-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Abiraterone acetate is indicated in combination with prednisone for the treatment of patients with: 1 Metastatic castration-resistant prostate cancer (CRPC), 2 Metastatic high-risk castration-sensitive prostate cancer (CSPC).</IndicationAndUsage>
<Description>Abiraterone acetate, USP, the active ingredient of abiraterone acetate tablets, USP is the acetyl ester of abiraterone. Abiraterone is an inhibitor of CYP17 (17α-hydroxylase/C17,20-lyase). Each abiraterone acetate tablet, USP contains 250 mg of abiraterone acetate, USP. Abiraterone acetate, USP is designated chemically as (3β)-17-(3-pyridinyl) androsta-5,16-dien-3-yl acetate and its structure is. Abiraterone acetate, USP is a white to off-white, non-hygroscopic, crystalline powder. Its molecular formula is C26H33NO2 and it has a molecular weight of 391.55. Abiraterone acetate, USP is a lipophilic compound with an octanol-water partition coefficient of 5.12 (Log P) and is practically insoluble in water. The pKa of the aromatic nitrogen is 5.19. Abiraterone acetate tablets, USP are available in 250 mg uncoated tablets with the following inactive ingredients: 1 250 mg uncoated tablets: silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, and sodium lauryl sulfate.</Description>
</NDC>
<NDC>
<NDCCode>71921-220-06</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (71921-220-06) </PackageDescription>
<NDC11Code>71921-0220-06</NDC11Code>
<ProductNDC>71921-220</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lacosamide</ProprietaryName>
<NonProprietaryName>Lacosamide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230921</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208308</ApplicationNumber>
<LabelerName>Florida Pharmaceutical Products, LLC</LabelerName>
<SubstanceName>LACOSAMIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230921</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lacosamide tablets are indicated for: 1 Treatment of partial-onset seizures in patients 1 month of age and older (1.1) , 2 Adjunctive therapy in the treatment of primary generalized tonic-clonic seizures in patients 4 years of age and older (1.2).</IndicationAndUsage>
<Description>The chemical name of lacosamide, USP the single (R)-enantiomer, is (R)-2-acetamido-N-benzyl-3-methoxypropionamide (IUPAC). Lacosamide is a functionalized amino acid. Its molecular formula is C13H18N2O3 and its molecular weight is 250.30. The chemical structure is. Lacosamide, USP is a white to light yellow powder. It is sparingly soluble in water and slightly soluble in acetonitrile and ethanol.</Description>
</NDC>
<NDC>
<NDCCode>71921-221-06</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (71921-221-06) </PackageDescription>
<NDC11Code>71921-0221-06</NDC11Code>
<ProductNDC>71921-221</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lacosamide</ProprietaryName>
<NonProprietaryName>Lacosamide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230921</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208308</ApplicationNumber>
<LabelerName>Florida Pharmaceutical Products, LLC</LabelerName>
<SubstanceName>LACOSAMIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230921</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lacosamide tablets are indicated for: 1 Treatment of partial-onset seizures in patients 1 month of age and older (1.1) , 2 Adjunctive therapy in the treatment of primary generalized tonic-clonic seizures in patients 4 years of age and older (1.2).</IndicationAndUsage>
<Description>The chemical name of lacosamide, USP the single (R)-enantiomer, is (R)-2-acetamido-N-benzyl-3-methoxypropionamide (IUPAC). Lacosamide is a functionalized amino acid. Its molecular formula is C13H18N2O3 and its molecular weight is 250.30. The chemical structure is. Lacosamide, USP is a white to light yellow powder. It is sparingly soluble in water and slightly soluble in acetonitrile and ethanol.</Description>
</NDC>
<NDC>
<NDCCode>71921-222-06</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (71921-222-06) </PackageDescription>
<NDC11Code>71921-0222-06</NDC11Code>
<ProductNDC>71921-222</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lacosamide</ProprietaryName>
<NonProprietaryName>Lacosamide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230921</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208308</ApplicationNumber>
<LabelerName>Florida Pharmaceutical Products, LLC</LabelerName>
<SubstanceName>LACOSAMIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230921</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lacosamide tablets are indicated for: 1 Treatment of partial-onset seizures in patients 1 month of age and older (1.1) , 2 Adjunctive therapy in the treatment of primary generalized tonic-clonic seizures in patients 4 years of age and older (1.2).</IndicationAndUsage>
<Description>The chemical name of lacosamide, USP the single (R)-enantiomer, is (R)-2-acetamido-N-benzyl-3-methoxypropionamide (IUPAC). Lacosamide is a functionalized amino acid. Its molecular formula is C13H18N2O3 and its molecular weight is 250.30. The chemical structure is. Lacosamide, USP is a white to light yellow powder. It is sparingly soluble in water and slightly soluble in acetonitrile and ethanol.</Description>
</NDC>
<NDC>
<NDCCode>71921-223-06</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (71921-223-06) </PackageDescription>
<NDC11Code>71921-0223-06</NDC11Code>
<ProductNDC>71921-223</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lacosamide</ProprietaryName>
<NonProprietaryName>Lacosamide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230921</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208308</ApplicationNumber>
<LabelerName>Florida Pharmaceutical Products, LLC</LabelerName>
<SubstanceName>LACOSAMIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230921</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lacosamide tablets are indicated for: 1 Treatment of partial-onset seizures in patients 1 month of age and older (1.1) , 2 Adjunctive therapy in the treatment of primary generalized tonic-clonic seizures in patients 4 years of age and older (1.2).</IndicationAndUsage>
<Description>The chemical name of lacosamide, USP the single (R)-enantiomer, is (R)-2-acetamido-N-benzyl-3-methoxypropionamide (IUPAC). Lacosamide is a functionalized amino acid. Its molecular formula is C13H18N2O3 and its molecular weight is 250.30. The chemical structure is. Lacosamide, USP is a white to light yellow powder. It is sparingly soluble in water and slightly soluble in acetonitrile and ethanol.</Description>
</NDC>
<NDC>
<NDCCode>71921-411-02</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (71921-411-02) / 200 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>71921-0411-02</NDC11Code>
<ProductNDC>71921-411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lacosamide Oral Solution</ProprietaryName>
<NonProprietaryName>Lacosamide Oral</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA220386</ApplicationNumber>
<LabelerName>Florida Pharmaceutical Products, LLC</LabelerName>
<SubstanceName>LACOSAMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<DEASchedule>CV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lacosamide oral solution is indicated for: 1 Treatment of partial-onset seizures in patients 1 month of age and older (1.1), 2 Adjunctive therapy in the treatment of primary generalized tonic-clonic seizures in patients 4 years of age and older (1.2).</IndicationAndUsage>
<Description>The chemical name of Lacosamide the single (R)-enantiomer, is (R)-2-acetamido-N-benzyl-3- methoxypropionamide (IUPAC). Lacosamide is a functionalized amino acid. Its molecular formula is C13H18N2O3 and its molecular weight is 250.3. The chemical structure is. Lacosamide, USP is a white to light yellow powder. It is sparingly soluble in water and slightly soluble in acetonitrile and ethanol.</Description>
</NDC>
<NDC>
<NDCCode>71921-411-71</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (71921-411-71) / 200 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>71921-0411-71</NDC11Code>
<ProductNDC>71921-411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lacosamide Oral Solution</ProprietaryName>
<NonProprietaryName>Lacosamide Oral</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA220386</ApplicationNumber>
<LabelerName>Florida Pharmaceutical Products, LLC</LabelerName>
<SubstanceName>LACOSAMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lacosamide oral solution is indicated for: 1 Treatment of partial-onset seizures in patients 1 month of age and older (1.1), 2 Adjunctive therapy in the treatment of primary generalized tonic-clonic seizures in patients 4 years of age and older (1.2).</IndicationAndUsage>
<Description>The chemical name of Lacosamide the single (R)-enantiomer, is (R)-2-acetamido-N-benzyl-3- methoxypropionamide (IUPAC). Lacosamide is a functionalized amino acid. Its molecular formula is C13H18N2O3 and its molecular weight is 250.3. The chemical structure is. Lacosamide, USP is a white to light yellow powder. It is sparingly soluble in water and slightly soluble in acetonitrile and ethanol.</Description>
</NDC>
<NDC>
<NDCCode>0004-0259-01</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (0004-0259-01) / 100 CAPSULE in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>00004-0259-01</NDC11Code>
<ProductNDC>0004-0259</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cellcept</ProprietaryName>
<NonProprietaryName>Mycophenolate Mofetil</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19950503</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050722</ApplicationNumber>
<LabelerName>Genentech, Inc.</LabelerName>
<SubstanceName>MYCOPHENOLATE MOFETIL</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimetabolite Immunosuppressant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19950503</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CELLCEPT [mycophenolate mofetil (MMF)] is indicated for the prophylaxis of organ rejection, in adult and pediatric recipients 3 months of age and older of allogeneic kidney [see Clinical Studies (14.1)], heart [see Clinical Studies (14.2)] or liver transplants [see Clinical Studies (14.3)], in combination with other immunosuppressants.</IndicationAndUsage>
<Description>CELLCEPT (mycophenolate mofetil) is an antimetabolite immunosuppressant. It is the 2-morpholinoethyl ester of mycophenolic acid (MPA), an immunosuppressive agent; inosine monophosphate dehydrogenase (IMPDH) inhibitor. The chemical name for mycophenolate mofetil (MMF) is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate. It has an empirical formula of C23H31NO7, a molecular weight of 433.50, and the following structural formula. MMF is a white to off-white crystalline powder. It is slightly soluble in water (43 µg/mL at pH 7.4); the solubility increases in acidic medium (4.27 mg/mL at pH 3.6). It is freely soluble in acetone, soluble in methanol, and sparingly soluble in ethanol. The apparent partition coefficient in 1-octanol/water (pH 7.4) buffer solution is 238. The pKa values for MMF are 5.6 for the morpholino group and 8.5 for the phenolic group. MMF hydrochloride has a solubility of 65.8 mg/mL in 5% Dextrose Injection USP (D5W). The pH of the reconstituted solution is 2.4 to 4.1. CELLCEPT is available for oral administration as capsules containing 250 mg of MMF, tablets containing 500 mg of MMF, and as a powder for oral suspension which, when reconstituted, contains 200 mg/mL of MMF. Inactive ingredients in CELLCEPT 250 mg capsules include croscarmellose sodium, magnesium stearate, povidone (K-90) and pregelatinized starch. The capsule shells contain black iron oxide, FD&C blue #2, gelatin, red iron oxide, silicon dioxide, sodium lauryl sulfate, titanium dioxide, and yellow iron oxide. Inactive ingredients in CELLCEPT 500 mg tablets include croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone (K-90), and Opadry® lavender Y-5R-10272-A (hydroxypropyl methylcellulose, hydroxypropyl cellulose, titanium dioxide, polyethylene glycol 400, FD&C Blue No. 2 aluminum lake [indigo carmine aluminum lake], and red iron oxide). Inactive ingredients in CELLCEPT Oral Suspension include aspartame, citric acid anhydrous, colloidal silicon dioxide, methylparaben, mixed fruit flavor, sodium citrate dihydrate, sorbitol, soybean lecithin, and xanthan gum. CELLCEPT Intravenous is the hydrochloride salt of MMF. The chemical name for the hydrochloride salt of MMF is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate hydrochloride. It has an empirical formula of C23H31NO7 HCl and a molecular weight of 469.96. CELLCEPT Intravenous is available as a sterile white to off-white lyophilized powder in single-dose vials containing MMF hydrochloride for administration by intravenous infusion only. Each vial contains 500 mg of mycophenolate mofetil equivalent to 542 mg of mycophenolate mofetil hydrochloride. The inactive ingredients are polysorbate 80, 25 mg, and citric acid, 5 mg. Sodium hydroxide or hydrochloric acid may have been used in the manufacture of CELLCEPT Intravenous to adjust the pH. Reconstitution and dilution with 5% Dextrose Injection USP yields a slightly yellow solution of MMF, 6 mg/mL [see Dosage and Administration (2.6)].</Description>
</NDC>
<NDC>
<NDCCode>0004-0259-43</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (0004-0259-43) / 500 CAPSULE in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>00004-0259-43</NDC11Code>
<ProductNDC>0004-0259</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cellcept</ProprietaryName>
<NonProprietaryName>Mycophenolate Mofetil</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19950503</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050722</ApplicationNumber>
<LabelerName>Genentech, Inc.</LabelerName>
<SubstanceName>MYCOPHENOLATE MOFETIL</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimetabolite Immunosuppressant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19950503</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CELLCEPT [mycophenolate mofetil (MMF)] is indicated for the prophylaxis of organ rejection, in adult and pediatric recipients 3 months of age and older of allogeneic kidney [see Clinical Studies (14.1)], heart [see Clinical Studies (14.2)] or liver transplants [see Clinical Studies (14.3)], in combination with other immunosuppressants.</IndicationAndUsage>
<Description>CELLCEPT (mycophenolate mofetil) is an antimetabolite immunosuppressant. It is the 2-morpholinoethyl ester of mycophenolic acid (MPA), an immunosuppressive agent; inosine monophosphate dehydrogenase (IMPDH) inhibitor. The chemical name for mycophenolate mofetil (MMF) is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate. It has an empirical formula of C23H31NO7, a molecular weight of 433.50, and the following structural formula. MMF is a white to off-white crystalline powder. It is slightly soluble in water (43 µg/mL at pH 7.4); the solubility increases in acidic medium (4.27 mg/mL at pH 3.6). It is freely soluble in acetone, soluble in methanol, and sparingly soluble in ethanol. The apparent partition coefficient in 1-octanol/water (pH 7.4) buffer solution is 238. The pKa values for MMF are 5.6 for the morpholino group and 8.5 for the phenolic group. MMF hydrochloride has a solubility of 65.8 mg/mL in 5% Dextrose Injection USP (D5W). The pH of the reconstituted solution is 2.4 to 4.1. CELLCEPT is available for oral administration as capsules containing 250 mg of MMF, tablets containing 500 mg of MMF, and as a powder for oral suspension which, when reconstituted, contains 200 mg/mL of MMF. Inactive ingredients in CELLCEPT 250 mg capsules include croscarmellose sodium, magnesium stearate, povidone (K-90) and pregelatinized starch. The capsule shells contain black iron oxide, FD&C blue #2, gelatin, red iron oxide, silicon dioxide, sodium lauryl sulfate, titanium dioxide, and yellow iron oxide. Inactive ingredients in CELLCEPT 500 mg tablets include croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone (K-90), and Opadry® lavender Y-5R-10272-A (hydroxypropyl methylcellulose, hydroxypropyl cellulose, titanium dioxide, polyethylene glycol 400, FD&C Blue No. 2 aluminum lake [indigo carmine aluminum lake], and red iron oxide). Inactive ingredients in CELLCEPT Oral Suspension include aspartame, citric acid anhydrous, colloidal silicon dioxide, methylparaben, mixed fruit flavor, sodium citrate dihydrate, sorbitol, soybean lecithin, and xanthan gum. CELLCEPT Intravenous is the hydrochloride salt of MMF. The chemical name for the hydrochloride salt of MMF is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate hydrochloride. It has an empirical formula of C23H31NO7 HCl and a molecular weight of 469.96. CELLCEPT Intravenous is available as a sterile white to off-white lyophilized powder in single-dose vials containing MMF hydrochloride for administration by intravenous infusion only. Each vial contains 500 mg of mycophenolate mofetil equivalent to 542 mg of mycophenolate mofetil hydrochloride. The inactive ingredients are polysorbate 80, 25 mg, and citric acid, 5 mg. Sodium hydroxide or hydrochloric acid may have been used in the manufacture of CELLCEPT Intravenous to adjust the pH. Reconstitution and dilution with 5% Dextrose Injection USP yields a slightly yellow solution of MMF, 6 mg/mL [see Dosage and Administration (2.6)].</Description>
</NDC>
<NDC>
<NDCCode>0004-0260-01</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (0004-0260-01) / 100 TABLET, FILM COATED in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>00004-0260-01</NDC11Code>
<ProductNDC>0004-0260</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cellcept</ProprietaryName>
<NonProprietaryName>Mycophenolate Mofetil</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19970619</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050723</ApplicationNumber>
<LabelerName>Genentech, Inc.</LabelerName>
<SubstanceName>MYCOPHENOLATE MOFETIL</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimetabolite Immunosuppressant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19970619</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CELLCEPT [mycophenolate mofetil (MMF)] is indicated for the prophylaxis of organ rejection, in adult and pediatric recipients 3 months of age and older of allogeneic kidney [see Clinical Studies (14.1)], heart [see Clinical Studies (14.2)] or liver transplants [see Clinical Studies (14.3)], in combination with other immunosuppressants.</IndicationAndUsage>
<Description>CELLCEPT (mycophenolate mofetil) is an antimetabolite immunosuppressant. It is the 2-morpholinoethyl ester of mycophenolic acid (MPA), an immunosuppressive agent; inosine monophosphate dehydrogenase (IMPDH) inhibitor. The chemical name for mycophenolate mofetil (MMF) is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate. It has an empirical formula of C23H31NO7, a molecular weight of 433.50, and the following structural formula. MMF is a white to off-white crystalline powder. It is slightly soluble in water (43 µg/mL at pH 7.4); the solubility increases in acidic medium (4.27 mg/mL at pH 3.6). It is freely soluble in acetone, soluble in methanol, and sparingly soluble in ethanol. The apparent partition coefficient in 1-octanol/water (pH 7.4) buffer solution is 238. The pKa values for MMF are 5.6 for the morpholino group and 8.5 for the phenolic group. MMF hydrochloride has a solubility of 65.8 mg/mL in 5% Dextrose Injection USP (D5W). The pH of the reconstituted solution is 2.4 to 4.1. CELLCEPT is available for oral administration as capsules containing 250 mg of MMF, tablets containing 500 mg of MMF, and as a powder for oral suspension which, when reconstituted, contains 200 mg/mL of MMF. Inactive ingredients in CELLCEPT 250 mg capsules include croscarmellose sodium, magnesium stearate, povidone (K-90) and pregelatinized starch. The capsule shells contain black iron oxide, FD&C blue #2, gelatin, red iron oxide, silicon dioxide, sodium lauryl sulfate, titanium dioxide, and yellow iron oxide. Inactive ingredients in CELLCEPT 500 mg tablets include croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone (K-90), and Opadry® lavender Y-5R-10272-A (hydroxypropyl methylcellulose, hydroxypropyl cellulose, titanium dioxide, polyethylene glycol 400, FD&C Blue No. 2 aluminum lake [indigo carmine aluminum lake], and red iron oxide). Inactive ingredients in CELLCEPT Oral Suspension include aspartame, citric acid anhydrous, colloidal silicon dioxide, methylparaben, mixed fruit flavor, sodium citrate dihydrate, sorbitol, soybean lecithin, and xanthan gum. CELLCEPT Intravenous is the hydrochloride salt of MMF. The chemical name for the hydrochloride salt of MMF is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate hydrochloride. It has an empirical formula of C23H31NO7 HCl and a molecular weight of 469.96. CELLCEPT Intravenous is available as a sterile white to off-white lyophilized powder in single-dose vials containing MMF hydrochloride for administration by intravenous infusion only. Each vial contains 500 mg of mycophenolate mofetil equivalent to 542 mg of mycophenolate mofetil hydrochloride. The inactive ingredients are polysorbate 80, 25 mg, and citric acid, 5 mg. Sodium hydroxide or hydrochloric acid may have been used in the manufacture of CELLCEPT Intravenous to adjust the pH. Reconstitution and dilution with 5% Dextrose Injection USP yields a slightly yellow solution of MMF, 6 mg/mL [see Dosage and Administration (2.6)].</Description>
</NDC>
<NDC>
<NDCCode>0004-0260-43</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (0004-0260-43) / 500 TABLET, FILM COATED in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>00004-0260-43</NDC11Code>
<ProductNDC>0004-0260</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cellcept</ProprietaryName>
<NonProprietaryName>Mycophenolate Mofetil</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19970619</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050723</ApplicationNumber>
<LabelerName>Genentech, Inc.</LabelerName>
<SubstanceName>MYCOPHENOLATE MOFETIL</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimetabolite Immunosuppressant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19970619</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CELLCEPT [mycophenolate mofetil (MMF)] is indicated for the prophylaxis of organ rejection, in adult and pediatric recipients 3 months of age and older of allogeneic kidney [see Clinical Studies (14.1)], heart [see Clinical Studies (14.2)] or liver transplants [see Clinical Studies (14.3)], in combination with other immunosuppressants.</IndicationAndUsage>
<Description>CELLCEPT (mycophenolate mofetil) is an antimetabolite immunosuppressant. It is the 2-morpholinoethyl ester of mycophenolic acid (MPA), an immunosuppressive agent; inosine monophosphate dehydrogenase (IMPDH) inhibitor. The chemical name for mycophenolate mofetil (MMF) is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate. It has an empirical formula of C23H31NO7, a molecular weight of 433.50, and the following structural formula. MMF is a white to off-white crystalline powder. It is slightly soluble in water (43 µg/mL at pH 7.4); the solubility increases in acidic medium (4.27 mg/mL at pH 3.6). It is freely soluble in acetone, soluble in methanol, and sparingly soluble in ethanol. The apparent partition coefficient in 1-octanol/water (pH 7.4) buffer solution is 238. The pKa values for MMF are 5.6 for the morpholino group and 8.5 for the phenolic group. MMF hydrochloride has a solubility of 65.8 mg/mL in 5% Dextrose Injection USP (D5W). The pH of the reconstituted solution is 2.4 to 4.1. CELLCEPT is available for oral administration as capsules containing 250 mg of MMF, tablets containing 500 mg of MMF, and as a powder for oral suspension which, when reconstituted, contains 200 mg/mL of MMF. Inactive ingredients in CELLCEPT 250 mg capsules include croscarmellose sodium, magnesium stearate, povidone (K-90) and pregelatinized starch. The capsule shells contain black iron oxide, FD&C blue #2, gelatin, red iron oxide, silicon dioxide, sodium lauryl sulfate, titanium dioxide, and yellow iron oxide. Inactive ingredients in CELLCEPT 500 mg tablets include croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone (K-90), and Opadry® lavender Y-5R-10272-A (hydroxypropyl methylcellulose, hydroxypropyl cellulose, titanium dioxide, polyethylene glycol 400, FD&C Blue No. 2 aluminum lake [indigo carmine aluminum lake], and red iron oxide). Inactive ingredients in CELLCEPT Oral Suspension include aspartame, citric acid anhydrous, colloidal silicon dioxide, methylparaben, mixed fruit flavor, sodium citrate dihydrate, sorbitol, soybean lecithin, and xanthan gum. CELLCEPT Intravenous is the hydrochloride salt of MMF. The chemical name for the hydrochloride salt of MMF is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate hydrochloride. It has an empirical formula of C23H31NO7 HCl and a molecular weight of 469.96. CELLCEPT Intravenous is available as a sterile white to off-white lyophilized powder in single-dose vials containing MMF hydrochloride for administration by intravenous infusion only. Each vial contains 500 mg of mycophenolate mofetil equivalent to 542 mg of mycophenolate mofetil hydrochloride. The inactive ingredients are polysorbate 80, 25 mg, and citric acid, 5 mg. Sodium hydroxide or hydrochloric acid may have been used in the manufacture of CELLCEPT Intravenous to adjust the pH. Reconstitution and dilution with 5% Dextrose Injection USP yields a slightly yellow solution of MMF, 6 mg/mL [see Dosage and Administration (2.6)].</Description>
</NDC>
<NDC>
<NDCCode>0004-0261-29</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (0004-0261-29) / 225 mL in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>00004-0261-29</NDC11Code>
<ProductNDC>0004-0261</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cellcept</ProprietaryName>
<NonProprietaryName>Mycophenolate Mofetil</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19981001</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050759</ApplicationNumber>
<LabelerName>Genentech, Inc.</LabelerName>
<SubstanceName>MYCOPHENOLATE MOFETIL</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antimetabolite Immunosuppressant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19981001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CELLCEPT [mycophenolate mofetil (MMF)] is indicated for the prophylaxis of organ rejection, in adult and pediatric recipients 3 months of age and older of allogeneic kidney [see Clinical Studies (14.1)], heart [see Clinical Studies (14.2)] or liver transplants [see Clinical Studies (14.3)], in combination with other immunosuppressants.</IndicationAndUsage>
<Description>CELLCEPT (mycophenolate mofetil) is an antimetabolite immunosuppressant. It is the 2-morpholinoethyl ester of mycophenolic acid (MPA), an immunosuppressive agent; inosine monophosphate dehydrogenase (IMPDH) inhibitor. The chemical name for mycophenolate mofetil (MMF) is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate. It has an empirical formula of C23H31NO7, a molecular weight of 433.50, and the following structural formula. MMF is a white to off-white crystalline powder. It is slightly soluble in water (43 µg/mL at pH 7.4); the solubility increases in acidic medium (4.27 mg/mL at pH 3.6). It is freely soluble in acetone, soluble in methanol, and sparingly soluble in ethanol. The apparent partition coefficient in 1-octanol/water (pH 7.4) buffer solution is 238. The pKa values for MMF are 5.6 for the morpholino group and 8.5 for the phenolic group. MMF hydrochloride has a solubility of 65.8 mg/mL in 5% Dextrose Injection USP (D5W). The pH of the reconstituted solution is 2.4 to 4.1. CELLCEPT is available for oral administration as capsules containing 250 mg of MMF, tablets containing 500 mg of MMF, and as a powder for oral suspension which, when reconstituted, contains 200 mg/mL of MMF. Inactive ingredients in CELLCEPT 250 mg capsules include croscarmellose sodium, magnesium stearate, povidone (K-90) and pregelatinized starch. The capsule shells contain black iron oxide, FD&C blue #2, gelatin, red iron oxide, silicon dioxide, sodium lauryl sulfate, titanium dioxide, and yellow iron oxide. Inactive ingredients in CELLCEPT 500 mg tablets include croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone (K-90), and Opadry® lavender Y-5R-10272-A (hydroxypropyl methylcellulose, hydroxypropyl cellulose, titanium dioxide, polyethylene glycol 400, FD&C Blue No. 2 aluminum lake [indigo carmine aluminum lake], and red iron oxide). Inactive ingredients in CELLCEPT Oral Suspension include aspartame, citric acid anhydrous, colloidal silicon dioxide, methylparaben, mixed fruit flavor, sodium citrate dihydrate, sorbitol, soybean lecithin, and xanthan gum. CELLCEPT Intravenous is the hydrochloride salt of MMF. The chemical name for the hydrochloride salt of MMF is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate hydrochloride. It has an empirical formula of C23H31NO7 HCl and a molecular weight of 469.96. CELLCEPT Intravenous is available as a sterile white to off-white lyophilized powder in single-dose vials containing MMF hydrochloride for administration by intravenous infusion only. Each vial contains 500 mg of mycophenolate mofetil equivalent to 542 mg of mycophenolate mofetil hydrochloride. The inactive ingredients are polysorbate 80, 25 mg, and citric acid, 5 mg. Sodium hydroxide or hydrochloric acid may have been used in the manufacture of CELLCEPT Intravenous to adjust the pH. Reconstitution and dilution with 5% Dextrose Injection USP yields a slightly yellow solution of MMF, 6 mg/mL [see Dosage and Administration (2.6)].</Description>
</NDC>
<NDC>
<NDCCode>0004-0298-09</NDCCode>
<PackageDescription>4 VIAL in 1 CARTON (0004-0298-09) / 20 mL in 1 VIAL</PackageDescription>
<NDC11Code>00004-0298-09</NDC11Code>
<ProductNDC>0004-0298</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cellcept</ProprietaryName>
<NonProprietaryName>Mycophenolate Mofetil Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19980812</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050758</ApplicationNumber>
<LabelerName>Genentech, Inc.</LabelerName>
<SubstanceName>MYCOPHENOLATE MOFETIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/20mL</StrengthUnit>
<Pharm_Classes>Antimetabolite Immunosuppressant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980812</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CELLCEPT [mycophenolate mofetil (MMF)] is indicated for the prophylaxis of organ rejection, in adult and pediatric recipients 3 months of age and older of allogeneic kidney [see Clinical Studies (14.1)], heart [see Clinical Studies (14.2)] or liver transplants [see Clinical Studies (14.3)], in combination with other immunosuppressants.</IndicationAndUsage>
<Description>CELLCEPT (mycophenolate mofetil) is an antimetabolite immunosuppressant. It is the 2-morpholinoethyl ester of mycophenolic acid (MPA), an immunosuppressive agent; inosine monophosphate dehydrogenase (IMPDH) inhibitor. The chemical name for mycophenolate mofetil (MMF) is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate. It has an empirical formula of C23H31NO7, a molecular weight of 433.50, and the following structural formula. MMF is a white to off-white crystalline powder. It is slightly soluble in water (43 µg/mL at pH 7.4); the solubility increases in acidic medium (4.27 mg/mL at pH 3.6). It is freely soluble in acetone, soluble in methanol, and sparingly soluble in ethanol. The apparent partition coefficient in 1-octanol/water (pH 7.4) buffer solution is 238. The pKa values for MMF are 5.6 for the morpholino group and 8.5 for the phenolic group. MMF hydrochloride has a solubility of 65.8 mg/mL in 5% Dextrose Injection USP (D5W). The pH of the reconstituted solution is 2.4 to 4.1. CELLCEPT is available for oral administration as capsules containing 250 mg of MMF, tablets containing 500 mg of MMF, and as a powder for oral suspension which, when reconstituted, contains 200 mg/mL of MMF. Inactive ingredients in CELLCEPT 250 mg capsules include croscarmellose sodium, magnesium stearate, povidone (K-90) and pregelatinized starch. The capsule shells contain black iron oxide, FD&C blue #2, gelatin, red iron oxide, silicon dioxide, sodium lauryl sulfate, titanium dioxide, and yellow iron oxide. Inactive ingredients in CELLCEPT 500 mg tablets include croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone (K-90), and Opadry® lavender Y-5R-10272-A (hydroxypropyl methylcellulose, hydroxypropyl cellulose, titanium dioxide, polyethylene glycol 400, FD&C Blue No. 2 aluminum lake [indigo carmine aluminum lake], and red iron oxide). Inactive ingredients in CELLCEPT Oral Suspension include aspartame, citric acid anhydrous, colloidal silicon dioxide, methylparaben, mixed fruit flavor, sodium citrate dihydrate, sorbitol, soybean lecithin, and xanthan gum. CELLCEPT Intravenous is the hydrochloride salt of MMF. The chemical name for the hydrochloride salt of MMF is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate hydrochloride. It has an empirical formula of C23H31NO7 HCl and a molecular weight of 469.96. CELLCEPT Intravenous is available as a sterile white to off-white lyophilized powder in single-dose vials containing MMF hydrochloride for administration by intravenous infusion only. Each vial contains 500 mg of mycophenolate mofetil equivalent to 542 mg of mycophenolate mofetil hydrochloride. The inactive ingredients are polysorbate 80, 25 mg, and citric acid, 5 mg. Sodium hydroxide or hydrochloric acid may have been used in the manufacture of CELLCEPT Intravenous to adjust the pH. Reconstitution and dilution with 5% Dextrose Injection USP yields a slightly yellow solution of MMF, 6 mg/mL [see Dosage and Administration (2.6)].</Description>
</NDC>
<NDC>
<NDCCode>0054-0936-21</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (0054-0936-21) </PackageDescription>
<NDC11Code>00054-0936-21</NDC11Code>
<ProductNDC>0054-0936</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tapentadol</ProprietaryName>
<NonProprietaryName>Tapentadol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20251215</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA200533</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>TAPENTADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC], Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tapentadol extended-release tablets are indicated for the management of: 1 Severe and persistent pain in adults that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate., 2 Severe and persistent neuropathic pain associated with diabetic peripheral neuropathy (DPN) in adults that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate.</IndicationAndUsage>
<Description>Tapentadol extended-release tablet is an opioid agonist, supplied in extended-release film-coated tablets for oral administration, containing 58.24, 116.48, 174.72, 232.96, and 291.20 mg of tapentadol hydrochloride in each tablet strength, corresponding to 50, 100, 150, 200, and 250 mg of tapentadol free-base, respectively. The chemical name is 3-[(1R,2R)-3-(dimethylamino)-1-ethyl-2-methylpropyl]phenol monohydrochloride. The structural formula is. The molecular weight of tapentadol HCl is 257.80, and the molecular formula is C14H23NOHCl. The n-octanol: water partition coefficient log P value is 2.89. The pKa values are 9.36 and 10.45. In addition to the active ingredient tapentadol HCl, tablets also contain the following inactive ingredients: alpha-tocopherol (vitamin E), hypromellose, polyethylene glycol, and polyethylene oxide. The film coating is comprised of polyvinyl alcohol, polyethylene glycol, talc, titanium dioxide, and the colorant FD&C Blue #2 aluminum lake is used for 100, 150, 200, and 250 mg strengths; and additionally, yellow iron oxide is used in 150 mg tablets. Printing inks contain shellac glaze and propylene glycol for all strengths, and black iron oxide (50, 100, 150 and 200 mg tablets) or titanium dioxide (250 mg tablets).</Description>
</NDC>
<NDC>
<NDCCode>0054-0937-21</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (0054-0937-21) </PackageDescription>
<NDC11Code>00054-0937-21</NDC11Code>
<ProductNDC>0054-0937</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tapentadol</ProprietaryName>
<NonProprietaryName>Tapentadol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20251215</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA200533</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>TAPENTADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC], Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tapentadol extended-release tablets are indicated for the management of: 1 Severe and persistent pain in adults that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate., 2 Severe and persistent neuropathic pain associated with diabetic peripheral neuropathy (DPN) in adults that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate.</IndicationAndUsage>
<Description>Tapentadol extended-release tablet is an opioid agonist, supplied in extended-release film-coated tablets for oral administration, containing 58.24, 116.48, 174.72, 232.96, and 291.20 mg of tapentadol hydrochloride in each tablet strength, corresponding to 50, 100, 150, 200, and 250 mg of tapentadol free-base, respectively. The chemical name is 3-[(1R,2R)-3-(dimethylamino)-1-ethyl-2-methylpropyl]phenol monohydrochloride. The structural formula is. The molecular weight of tapentadol HCl is 257.80, and the molecular formula is C14H23NOHCl. The n-octanol: water partition coefficient log P value is 2.89. The pKa values are 9.36 and 10.45. In addition to the active ingredient tapentadol HCl, tablets also contain the following inactive ingredients: alpha-tocopherol (vitamin E), hypromellose, polyethylene glycol, and polyethylene oxide. The film coating is comprised of polyvinyl alcohol, polyethylene glycol, talc, titanium dioxide, and the colorant FD&C Blue #2 aluminum lake is used for 100, 150, 200, and 250 mg strengths; and additionally, yellow iron oxide is used in 150 mg tablets. Printing inks contain shellac glaze and propylene glycol for all strengths, and black iron oxide (50, 100, 150 and 200 mg tablets) or titanium dioxide (250 mg tablets).</Description>
</NDC>
<NDC>
<NDCCode>0054-0938-21</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (0054-0938-21) </PackageDescription>
<NDC11Code>00054-0938-21</NDC11Code>
<ProductNDC>0054-0938</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tapentadol</ProprietaryName>
<NonProprietaryName>Tapentadol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20251215</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA200533</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>TAPENTADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC], Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tapentadol extended-release tablets are indicated for the management of: 1 Severe and persistent pain in adults that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate., 2 Severe and persistent neuropathic pain associated with diabetic peripheral neuropathy (DPN) in adults that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate.</IndicationAndUsage>
<Description>Tapentadol extended-release tablet is an opioid agonist, supplied in extended-release film-coated tablets for oral administration, containing 58.24, 116.48, 174.72, 232.96, and 291.20 mg of tapentadol hydrochloride in each tablet strength, corresponding to 50, 100, 150, 200, and 250 mg of tapentadol free-base, respectively. The chemical name is 3-[(1R,2R)-3-(dimethylamino)-1-ethyl-2-methylpropyl]phenol monohydrochloride. The structural formula is. The molecular weight of tapentadol HCl is 257.80, and the molecular formula is C14H23NOHCl. The n-octanol: water partition coefficient log P value is 2.89. The pKa values are 9.36 and 10.45. In addition to the active ingredient tapentadol HCl, tablets also contain the following inactive ingredients: alpha-tocopherol (vitamin E), hypromellose, polyethylene glycol, and polyethylene oxide. The film coating is comprised of polyvinyl alcohol, polyethylene glycol, talc, titanium dioxide, and the colorant FD&C Blue #2 aluminum lake is used for 100, 150, 200, and 250 mg strengths; and additionally, yellow iron oxide is used in 150 mg tablets. Printing inks contain shellac glaze and propylene glycol for all strengths, and black iron oxide (50, 100, 150 and 200 mg tablets) or titanium dioxide (250 mg tablets).</Description>
</NDC>
<NDC>
<NDCCode>0054-0939-21</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (0054-0939-21) </PackageDescription>
<NDC11Code>00054-0939-21</NDC11Code>
<ProductNDC>0054-0939</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tapentadol</ProprietaryName>
<NonProprietaryName>Tapentadol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20251215</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA200533</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>TAPENTADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC], Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tapentadol extended-release tablets are indicated for the management of: 1 Severe and persistent pain in adults that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate., 2 Severe and persistent neuropathic pain associated with diabetic peripheral neuropathy (DPN) in adults that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate.</IndicationAndUsage>
<Description>Tapentadol extended-release tablet is an opioid agonist, supplied in extended-release film-coated tablets for oral administration, containing 58.24, 116.48, 174.72, 232.96, and 291.20 mg of tapentadol hydrochloride in each tablet strength, corresponding to 50, 100, 150, 200, and 250 mg of tapentadol free-base, respectively. The chemical name is 3-[(1R,2R)-3-(dimethylamino)-1-ethyl-2-methylpropyl]phenol monohydrochloride. The structural formula is. The molecular weight of tapentadol HCl is 257.80, and the molecular formula is C14H23NOHCl. The n-octanol: water partition coefficient log P value is 2.89. The pKa values are 9.36 and 10.45. In addition to the active ingredient tapentadol HCl, tablets also contain the following inactive ingredients: alpha-tocopherol (vitamin E), hypromellose, polyethylene glycol, and polyethylene oxide. The film coating is comprised of polyvinyl alcohol, polyethylene glycol, talc, titanium dioxide, and the colorant FD&C Blue #2 aluminum lake is used for 100, 150, 200, and 250 mg strengths; and additionally, yellow iron oxide is used in 150 mg tablets. Printing inks contain shellac glaze and propylene glycol for all strengths, and black iron oxide (50, 100, 150 and 200 mg tablets) or titanium dioxide (250 mg tablets).</Description>
</NDC>
<NDC>
<NDCCode>0054-0940-21</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (0054-0940-21) </PackageDescription>
<NDC11Code>00054-0940-21</NDC11Code>
<ProductNDC>0054-0940</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tapentadol</ProprietaryName>
<NonProprietaryName>Tapentadol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20251215</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA200533</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>TAPENTADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC], Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tapentadol extended-release tablets are indicated for the management of: 1 Severe and persistent pain in adults that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate., 2 Severe and persistent neuropathic pain associated with diabetic peripheral neuropathy (DPN) in adults that requires an extended treatment period with a daily opioid analgesic and for which alternative treatment options are inadequate.</IndicationAndUsage>
<Description>Tapentadol extended-release tablet is an opioid agonist, supplied in extended-release film-coated tablets for oral administration, containing 58.24, 116.48, 174.72, 232.96, and 291.20 mg of tapentadol hydrochloride in each tablet strength, corresponding to 50, 100, 150, 200, and 250 mg of tapentadol free-base, respectively. The chemical name is 3-[(1R,2R)-3-(dimethylamino)-1-ethyl-2-methylpropyl]phenol monohydrochloride. The structural formula is. The molecular weight of tapentadol HCl is 257.80, and the molecular formula is C14H23NOHCl. The n-octanol: water partition coefficient log P value is 2.89. The pKa values are 9.36 and 10.45. In addition to the active ingredient tapentadol HCl, tablets also contain the following inactive ingredients: alpha-tocopherol (vitamin E), hypromellose, polyethylene glycol, and polyethylene oxide. The film coating is comprised of polyvinyl alcohol, polyethylene glycol, talc, titanium dioxide, and the colorant FD&C Blue #2 aluminum lake is used for 100, 150, 200, and 250 mg strengths; and additionally, yellow iron oxide is used in 150 mg tablets. Printing inks contain shellac glaze and propylene glycol for all strengths, and black iron oxide (50, 100, 150 and 200 mg tablets) or titanium dioxide (250 mg tablets).</Description>
</NDC>
<NDC>
<NDCCode>0228-2539-96</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (0228-2539-96) </PackageDescription>
<NDC11Code>00228-2539-96</NDC11Code>
<ProductNDC>0228-2539</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carbidopa And Levodopa</ProprietaryName>
<NonProprietaryName>Carbidopa And Levodopa</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19930901</StartMarketingDate>
<EndMarketingDate>20241130</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074260</ApplicationNumber>
<LabelerName>Actavis Pharma, Inc.</LabelerName>
<SubstanceName>CARBIDOPA; LEVODOPA</SubstanceName>
<StrengthNumber>25; 100</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Amino Acids, Aromatic [CS], Aromatic Amino Acid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-11-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19930901</StartMarketingDatePackage>
<EndMarketingDatePackage>20241031</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carbidopa and levodopa tablets are indicated in the treatment of Parkinson's disease, post-encephalitic parkinsonism, and symptomatic parkinsonism that may follow carbon monoxide intoxication or manganese intoxication. Carbidopa allows patients treated for Parkinson's disease to use much lower doses of levodopa. Some patients who responded poorly to levodopa have improved on carbidopa and levodopa. This is most likely due to decreased peripheral decarboxylation of levodopa caused by administration of carbidopa rather than by a primary effect of carbidopa on the nervous system. Carbidopa has not been shown to enhance the intrinsic efficacy of levodopa. Carbidopa may also reduce nausea and vomiting and permit more rapid titration of levodopa.</IndicationAndUsage>
<Description>Carbidopa and levodopa tablets, USP are a combination product for the treatment of Parkinson's disease and syndrome. Carbidopa, USP an inhibitor of aromatic amino acid decarboxylation, is a white, crystalline compound, slightly soluble in water, with a molecular weight of 244.24. It is designated chemically as (-)-L-α-hydrazino-α-methyl-β-(3,4-dihydroxybenzene) propanoic acid monohydrate. Its molecular formula is C10H14N2O4H2O, and its structural formula is. Tablet content is expressed in terms of anhydrous carbidopa which has a molecular weight of 226.23. Levodopa, USP an aromatic amino acid, is a white, crystalline compound, slightly soluble in water, with a molecular weight of 197.19. It is designated chemically as (-)-L-α-amino-β-(3,4-dihydroxybenzene) propanoic acid. Its molecular formula is C9H11NO4, and its structural formula is. Carbidopa and Levodopa Tablets, USP for oral administration, are supplied in three strengths. 10 mg/100 mg, containing 10 mg of carbidopa, USP and 100 mg of levodopa, USP. 25 mg/100 mg, containing 25 mg of carbidopa, USP and 100 mg of levodopa, USP. 25 mg/250 mg, containing 25 mg of carbidopa, USP and 250 mg of levodopa, USP. In addition, each tablet contains the following inactive ingredients: corn starch, magnesium stearate, microcrystalline cellulose, pregelatinized starch (maize). In addition, the 25 mg/100 mg strength contain D&C yellow #10 aluminum lake and FD&C yellow #6 aluminum lake (sunset yellow lake). The 10 mg/100 mg and 25 mg/250 mg strengths contain FD&C blue #2 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>0228-2540-96</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (0228-2540-96) </PackageDescription>
<NDC11Code>00228-2540-96</NDC11Code>
<ProductNDC>0228-2540</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carbidopa And Levodopa</ProprietaryName>
<NonProprietaryName>Carbidopa And Levodopa</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19930901</StartMarketingDate>
<EndMarketingDate>20260531</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074260</ApplicationNumber>
<LabelerName>Actavis Pharma, Inc.</LabelerName>
<SubstanceName>CARBIDOPA; LEVODOPA</SubstanceName>
<StrengthNumber>25; 250</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Amino Acids, Aromatic [CS], Aromatic Amino Acid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19930901</StartMarketingDatePackage>
<EndMarketingDatePackage>20260531</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carbidopa and levodopa tablets are indicated in the treatment of Parkinson's disease, post-encephalitic parkinsonism, and symptomatic parkinsonism that may follow carbon monoxide intoxication or manganese intoxication. Carbidopa allows patients treated for Parkinson's disease to use much lower doses of levodopa. Some patients who responded poorly to levodopa have improved on carbidopa and levodopa. This is most likely due to decreased peripheral decarboxylation of levodopa caused by administration of carbidopa rather than by a primary effect of carbidopa on the nervous system. Carbidopa has not been shown to enhance the intrinsic efficacy of levodopa. Carbidopa may also reduce nausea and vomiting and permit more rapid titration of levodopa.</IndicationAndUsage>
<Description>Carbidopa and levodopa tablets, USP are a combination product for the treatment of Parkinson's disease and syndrome. Carbidopa, USP an inhibitor of aromatic amino acid decarboxylation, is a white, crystalline compound, slightly soluble in water, with a molecular weight of 244.24. It is designated chemically as (-)-L-α-hydrazino-α-methyl-β-(3,4-dihydroxybenzene) propanoic acid monohydrate. Its molecular formula is C10H14N2O4H2O, and its structural formula is. Tablet content is expressed in terms of anhydrous carbidopa which has a molecular weight of 226.23. Levodopa, USP an aromatic amino acid, is a white, crystalline compound, slightly soluble in water, with a molecular weight of 197.19. It is designated chemically as (-)-L-α-amino-β-(3,4-dihydroxybenzene) propanoic acid. Its molecular formula is C9H11NO4, and its structural formula is. Carbidopa and Levodopa Tablets, USP for oral administration, are supplied in three strengths. 10 mg/100 mg, containing 10 mg of carbidopa, USP and 100 mg of levodopa, USP. 25 mg/100 mg, containing 25 mg of carbidopa, USP and 100 mg of levodopa, USP. 25 mg/250 mg, containing 25 mg of carbidopa, USP and 250 mg of levodopa, USP. In addition, each tablet contains the following inactive ingredients: corn starch, magnesium stearate, microcrystalline cellulose, pregelatinized starch (maize). In addition, the 25 mg/100 mg strength contain D&C yellow #10 aluminum lake and FD&C yellow #6 aluminum lake (sunset yellow lake). The 10 mg/100 mg and 25 mg/250 mg strengths contain FD&C blue #2 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>0264-1943-20</NDCCode>
<PackageDescription>12 CONTAINER in 1 CASE (0264-1943-20) > 250 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-1943-20</NDC11Code>
<ProductNDC>0264-1943</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hyperlyte</ProprietaryName>
<ProprietaryNameSuffix>Cr</ProprietaryNameSuffix>
<NonProprietaryName>Multi Electrolyte Concentrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20120412</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>POTASSIUM ACETATE; SODIUM CHLORIDE; SODIUM ACETATE; MAGNESIUM CHLORIDE; CALCIUM CHLORIDE</SubstanceName>
<StrengthNumber>1.96; 1.17; .68; .51; .37</StrengthNumber>
<StrengthUnit>g/20mL; g/20mL; g/20mL; g/20mL; g/20mL</StrengthUnit>
<Pharm_Classes>Potassium Compounds [CS],Potassium Salt [EPC],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Calculi Dissolution Agent [EPC],Magnesium Ion Exchange Activity [MoA],Osmotic Laxative [EPC],Osmotic Activity [MoA],Inhibition Small Intestine Fluid/Electrolyte Absorption [PE],Increased Large Intestinal Motility [PE],Stimulation Large Intestine Fluid/Electrolyte Secretion [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Blood Coagulation Factor [EPC],Increased Coagulation Factor Activity [PE],Calcium [CS],Cations, Divalent [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120412</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0486-1125-01</NDCCode>
<PackageDescription>100 TABLET, COATED in 1 BOTTLE (0486-1125-01) </PackageDescription>
<NDC11Code>00486-1125-01</NDC11Code>
<ProductNDC>0486-1125</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>K Phos</ProprietaryName>
<ProprietaryNameSuffix>Neutral</ProprietaryNameSuffix>
<NonProprietaryName>Sodium Phosphate, Dibasic, Anhydrous, Potassium Phosphate, Monobasic, And Sodium Phosphate, Monobasic, Monohydrate</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19770411</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Beach Products, Inc.</LabelerName>
<SubstanceName>SODIUM PHOSPHATE, DIBASIC, ANHYDROUS; POTASSIUM PHOSPHATE, MONOBASIC; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE</SubstanceName>
<StrengthNumber>852; 155; 130</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-03-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19770411</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>K-PHOS® NEUTRAL increases urinary phosphate and pyrophosphate. As a phosphorus supplement, each tablet supplies 25% of the U.S. Recommended Daily Allowance (U.S.RDA) of phosphorus for adul t s and children over 4 years of age.</IndicationAndUsage>
<Description>Each tablet contains 852 mg dibasic sodium phosphate anhydrous, 155 mg monobasic potassium phosphate, and the equivalent of 130 mg monobasic sodium phosphate monohydrate. Each tablet yields approximately 250 mg of phosphorus, 298 mg of sodium (13.0 mEq) and 45 mg of potassium (1.1 mEq). The components of K-PHOS® NEUTRAL have the following chemical names and molecular formulae. Dibasic Sodium Phosphate, Anhydrous Molecular Formula: Na2HPO4, Molecular Weight: 141.96. Monobasic Potassium Phosphate Molecular Formula: KH2PO4, Molecular Weight: 136.09. Monobasic Sodium Phosphate, Monohydrate Molecular Formula:NaH2PO4.H2O, Molecular Weight: 137.98. Inactive Ingredients: Lactose monohydrate, povidone, white coating (hydroxypropyl methylcellulose, titanium dioxide, maltodextrin, triacetin, glycerol triacetate, polyethylene glycol, sodium citrate, and stearic acid), sodium starch glycolate, and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>0486-1125-05</NDCCode>
<PackageDescription>500 TABLET, COATED in 1 BOTTLE (0486-1125-05) </PackageDescription>
<NDC11Code>00486-1125-05</NDC11Code>
<ProductNDC>0486-1125</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>K Phos</ProprietaryName>
<ProprietaryNameSuffix>Neutral</ProprietaryNameSuffix>
<NonProprietaryName>Sodium Phosphate, Dibasic, Anhydrous, Potassium Phosphate, Monobasic, And Sodium Phosphate, Monobasic, Monohydrate</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19770411</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Beach Products, Inc.</LabelerName>
<SubstanceName>SODIUM PHOSPHATE, DIBASIC, ANHYDROUS; POTASSIUM PHOSPHATE, MONOBASIC; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE</SubstanceName>
<StrengthNumber>852; 155; 130</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-03-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19770411</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>K-PHOS® NEUTRAL increases urinary phosphate and pyrophosphate. As a phosphorus supplement, each tablet supplies 25% of the U.S. Recommended Daily Allowance (U.S.RDA) of phosphorus for adul t s and children over 4 years of age.</IndicationAndUsage>
<Description>Each tablet contains 852 mg dibasic sodium phosphate anhydrous, 155 mg monobasic potassium phosphate, and the equivalent of 130 mg monobasic sodium phosphate monohydrate. Each tablet yields approximately 250 mg of phosphorus, 298 mg of sodium (13.0 mEq) and 45 mg of potassium (1.1 mEq). The components of K-PHOS® NEUTRAL have the following chemical names and molecular formulae. Dibasic Sodium Phosphate, Anhydrous Molecular Formula: Na2HPO4, Molecular Weight: 141.96. Monobasic Potassium Phosphate Molecular Formula: KH2PO4, Molecular Weight: 136.09. Monobasic Sodium Phosphate, Monohydrate Molecular Formula:NaH2PO4.H2O, Molecular Weight: 137.98. Inactive Ingredients: Lactose monohydrate, povidone, white coating (hydroxypropyl methylcellulose, titanium dioxide, maltodextrin, triacetin, glycerol triacetate, polyethylene glycol, sodium citrate, and stearic acid), sodium starch glycolate, and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>0527-1931-06</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (0527-1931-06) </PackageDescription>
<NDC11Code>00527-1931-06</NDC11Code>
<ProductNDC>0527-1931</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clarithromycin</ProprietaryName>
<NonProprietaryName>Clarithromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191123</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203584</ApplicationNumber>
<LabelerName>Lannett Company, Inc.</LabelerName>
<SubstanceName>CLARITHROMYCIN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Macrolide Antimicrobial [EPC], Macrolides [CS], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191123</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Clarithromycin is a semi-synthetic macrolide antimicrobial for oral use. Chemically, it is 6- 0-methylerythromycin. The molecular formula is C 38H 69NO 13, and the molecular weight is 747.96. The structural formula is:. Figure 1: Structure of Clarithromycin. Clarithromycin is a white to off-white crystalline powder. It is soluble in acetone, slightly soluble in methanol, ethanol, and acetonitrile, and practically insoluble in water. Each white to off-white oval film-coated immediate-release clarithromycin tablet, USP contains 250 mg or 500 mg of clarithromycin and the following inactive ingredients: croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide, hypromellose, titanium dioxide and polyethylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>0527-1932-06</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (0527-1932-06) </PackageDescription>
<NDC11Code>00527-1932-06</NDC11Code>
<ProductNDC>0527-1932</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clarithromycin</ProprietaryName>
<NonProprietaryName>Clarithromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191123</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203584</ApplicationNumber>
<LabelerName>Lannett Company, Inc.</LabelerName>
<SubstanceName>CLARITHROMYCIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Macrolide Antimicrobial [EPC], Macrolides [CS], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191123</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Clarithromycin is a semi-synthetic macrolide antimicrobial for oral use. Chemically, it is 6- 0-methylerythromycin. The molecular formula is C 38H 69NO 13, and the molecular weight is 747.96. The structural formula is:. Figure 1: Structure of Clarithromycin. Clarithromycin is a white to off-white crystalline powder. It is soluble in acetone, slightly soluble in methanol, ethanol, and acetonitrile, and practically insoluble in water. Each white to off-white oval film-coated immediate-release clarithromycin tablet, USP contains 250 mg or 500 mg of clarithromycin and the following inactive ingredients: croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide, hypromellose, titanium dioxide and polyethylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>0574-4135-05</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (0574-4135-05) / 5 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>00574-4135-05</NDC11Code>
<ProductNDC>0574-4135</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Loteprednol Etabonate</ProprietaryName>
<NonProprietaryName>Loteprednol Etabonate</NonProprietaryName>
<DosageFormName>SUSPENSION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20260112</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215204</ApplicationNumber>
<LabelerName>Padagis US LLC</LabelerName>
<SubstanceName>LOTEPREDNOL ETABONATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260112</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Loteprednol etabonate ophthalmic suspension is indicated for the treatment of steroid responsive inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe such as allergic conjunctivitis, acne rosacea, superficial punctate keratitis, herpes zoster keratitis, iritis, cyclitis, selected infective conjunctivitides, when the inherent hazard of steroid use is accepted to obtain an advisable diminution in edema and inflammation. Loteprednol etabonate ophthalmic suspension is less effective than prednisolone acetate 1% in two 28-day controlled clinical studies in acute anterior uveitis, where 72% of patients treated with loteprednol etabonate ophthalmic suspension experienced resolution of anterior chamber cells, compared to 87% of patients treated with prednisolone acetate 1%. The incidence of patients with clinically significant increases in IOP (≥10 mmHg) was 1% with loteprednol etabonate ophthalmic suspension and 6% with prednisolone acetate 1%. Loteprednol etabonate ophthalmic suspension should not be used in patients who require a more potent corticosteroid for this indication. Loteprednol etabonate ophthalmic suspension is also indicated for the treatment of post-operative inflammation following ocular surgery.</IndicationAndUsage>
<Description>Loteprednol etabonate ophthalmic suspension contains a sterile, topical anti-inflammatory corticosteroid for ophthalmic use. Loteprednol etabonate is a white to off-white powder. Loteprednol etabonate is represented by the following structural formula. C24H31ClO7Mol. Wt. 466.96. Chemical name: chloromethyl 17α-[(ethoxycarbonyl)oxy]-11β-hydroxy-3-oxoandrosta-1,4-diene-17β-carboxylate. Each mL contains. ACTIVE: Loteprednol Etabonate 5 mg (0.5%);. INACTIVES: Edetate Disodium, Glycerin, Povidone, Tyloxapol, and Water for Injection. Hydrochloric Acid and/or Sodium Hydroxide may be added to adjust the pH to 5.3-5.6. The suspension is essentially isotonic with a tonicity of 250 to 310 mOsmol/kg. PRESERVATIVE ADDED: Benzalkonium Chloride 0.01%.</Description>
</NDC>
</NDCList>