{
"NDC": [
{
"NDCCode": "72162-1412-2",
"PackageDescription": "1 BOTTLE in 1 CARTON (72162-1412-2) / 118.28 mL in 1 BOTTLE",
"NDC11Code": "72162-1412-02",
"ProductNDC": "72162-1412",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluocinolone Acetonide",
"NonProprietaryName": "Fluocinolone Acetonide",
"DosageFormName": "OIL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170614",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202848",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "FLUOCINOLONE ACETONIDE",
"StrengthNumber": ".01",
"StrengthUnit": "mg/100mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240313",
"SamplePackage": "N",
"IndicationAndUsage": "Fluocinolone Acetonide Topical Oil, 0.01% is a low to medium potency corticosteroid indicated. In adult patients for the treatment of psoriasis of the scalp (Scalp Oil).",
"Description": "Fluocinolone Acetonide Topical Oil, 0.01% contains fluocinolone acetonide {(6α, 11β, 16α)-6,9-difluoro-11, 21-dihydroxy-16,17[(1-methylethylidene)bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone}, a synthetic corticosteroid for topical dermatologic use. This formulation is also marketed as Fluocinolone Acetonide Topical Oil, 0.01% (Body Oil) for atopic dermatitis in adults and for moderate to severe atopic dermatitis in pediatric patients 2 years and older, and as Fluocinolone Acetonide Oil, 0.01% (Ear Drops) for chronic eczematous external otitis. Chemically, fluocinolone acetonide is C24H30F2O6. It has the following structural formula. Fluocinolone acetonide in Fluocinolone Acetonide Topical Oil, 0.01% has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of Fluocinolone Acetonide Topical Oil, 0.01% contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil NF. Each packaged product contains 2 shower caps. The shower cap is made of low density polyethylene material with rubber elastic."
},
{
"NDCCode": "36987-1412-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (36987-1412-2)",
"NDC11Code": "36987-1412-02",
"ProductNDC": "36987-1412",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Broccoli",
"NonProprietaryName": "Broccoli",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "BROCCOLI",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Vegetable Proteins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "37662-1412-2",
"PackageDescription": "1200 PELLET in 1 BOTTLE, GLASS (37662-1412-2) ",
"NDC11Code": "37662-1412-02",
"ProductNDC": "37662-1412",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Saccharum Lactis",
"NonProprietaryName": "Saccharum Lactis",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220823",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "LACTOSE, UNSPECIFIED FORM",
"StrengthNumber": "6",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2022-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220823",
"SamplePackage": "N"
},
{
"NDCCode": "51662-1412-3",
"PackageDescription": "25 POUCH in 1 BOX (51662-1412-3) / 1 VIAL, SINGLE-DOSE in 1 POUCH (51662-1412-2) / 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "51662-1412-03",
"ProductNDC": "51662-1412",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hci And Epinephrine With Epinephrine",
"NonProprietaryName": "Lidocaine Hci And Epinephrine With Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20191014",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA006488",
"LabelerName": "HF Acquisition Co LLC, DBA HealthFirst",
"SubstanceName": "EPINEPHRINE BITARTRATE; LIDOCAINE HYDROCHLORIDE ANHYDROUS",
"StrengthNumber": ".005; 20",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220316",
"SamplePackage": "N",
"IndicationAndUsage": "Xylocaine (lidocaine HCl) Injections are indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.",
"Description": "Xylocaine (lidocaine HCl) Injections are sterile, nonpyrogenic, aqueous solutions that contain a local anesthetic agent with or without epinephrine and are administered parenterally by injection. See INDICATIONS & USAGE section for specific uses. Xylocaine solutions contain lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C 14H 22N 2O HCl) has the following structural formula. Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21. Epinephrine (C 9H 13NO 3) has the following structural formula. Dosage forms listed as Xylocaine-MPF indicate single dose solutions that are Methyl Paraben Free (MPF). Xylocaine MPF is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. Xylocaine in multiple dose vials: Each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Xylocaine MPF with Epinephrine is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer. Xylocaine with Epinephrine in multiple dose vials: Each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid. Filled under nitrogen."
},
{
"NDCCode": "62991-1412-2",
"PackageDescription": "25 g in 1 JAR (62991-1412-2) ",
"NDC11Code": "62991-1412-02",
"ProductNDC": "62991-1412",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Testosterone Propionate",
"DosageFormName": "POWDER",
"StartMarketingDate": "20110427",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "LETCO MEDICAL, LLC",
"SubstanceName": "TESTOSTERONE PROPIONATE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"DEASchedule": "CIII",
"Status": "Unfinished",
"LastUpdate": "2026-06-15",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "27-APR-11"
},
{
"NDCCode": "63479-1412-2",
"PackageDescription": "30 mL in 1 BOTTLE, GLASS (63479-1412-2) ",
"NDC11Code": "63479-1412-02",
"ProductNDC": "63479-1412",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "N12",
"ProprietaryNameSuffix": "Immunosode",
"NonProprietaryName": "Arsenic Trioxide, Baptisia Tinctoria Root, Sus Scrofa Bone Marrow, Bryonia Alba Root, Echinacea Angustifolia, Echinacea Purpurea, Olea Europaea Flower, Ulex Europaeus, Flower, Lachesis Muta Venom, Levisticum Officinale, Treponemic Skin Canker Human",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "SUBLINGUAL",
"StartMarketingDate": "20240115",
"EndMarketingDate": "20250528",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Apex Energetics Inc.",
"SubstanceName": "ARSENIC TRIOXIDE; BAPTISIA TINCTORIA ROOT; BILBERRY; BRYONIA ALBA ROOT; ECHINACEA ANGUSTIFOLIA; ECHINACEA PURPUREA; GONORRHEAL URETHRAL SECRETION HUMAN; LACHESIS MUTA VENOM; LEVISTICUM OFFICINALE; OLEA EUROPAEA FLOWER; RANCID BEEF; SALMONELLA ENTERICA ENTERICA SEROVAR TYPHI; STAPHYLOCOCCUS EPIDERMIDIS; STAPHYLOCOCCUS HAEMOLYTICUS; STAPHYLOCOCCUS SIMULANS; STREPTOCOCCUS PYOGENES; SULFUR; SUS SCROFA BONE MARROW; SUS SCROFA SPLEEN; THUJA OCCIDENTALIS LEAFY TWIG; TREPONEMIC SKIN CANKER HUMAN; TUBERCULIN PURIFIED PROTEIN DERIVATIVE; ULEX EUROPAEUS FLOWER; VACCINIA VIRUS STRAIN NEW YORK CITY BOARD OF HEALTH LIVE ANTIGEN; VISCUM ALBUM FRUITING TOP",
"StrengthNumber": "30; 15; 30; 30; 9; 9; 30; 30; 12; 30; 30; 60; 30; 30; 30; 30; 30; 7; 7; 30; 30; 30; 30; 30; 12",
"StrengthUnit": "[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_C]/mL; [hp_C]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL",
"Pharm_Classes": "Actively Acquired Immunity [PE], Antigens, Bacterial [CS], Cell-mediated Immunity [PE], Live Vaccinia Virus Vaccine [EPC], Skin Test Antigen [EPC], Smallpox Vaccine [CS], Tuberculosis Skin Test [EPC], Vaccines, Live, Unattenuated [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-05-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20240115",
"EndMarketingDatePackage": "20250528",
"SamplePackage": "N"
},
{
"NDCCode": "67296-1412-2",
"PackageDescription": "20 TABLET, FILM COATED in 1 BOTTLE (67296-1412-2) ",
"NDC11Code": "67296-1412-02",
"ProductNDC": "67296-1412",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketorolac Tromethamine",
"NonProprietaryName": "Ketorolac Tromethamine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20130516",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074761",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "KETOROLAC TROMETHAMINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20210401",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ketorolac tromethamine tablets and other treatment options before deciding to use ketorolac tromethamine tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals.",
"Description": "Ketorolac tromethamine is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-Benzoyl-2,3-dihydro-1 H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol, and the structural formula is:. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.41. Each tablet for oral administration contains 10 mg ketorolac tromethamine, USP. In addition, each tablet contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, croscarmellose sodium, glyceryl triacetate, hypromellose, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, sodium lauryl sulfate and titanium dioxide."
},
{
"NDCCode": "67296-1412-9",
"PackageDescription": "2 TABLET, FILM COATED in 1 BOTTLE (67296-1412-9) ",
"NDC11Code": "67296-1412-09",
"ProductNDC": "67296-1412",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketorolac Tromethamine",
"NonProprietaryName": "Ketorolac Tromethamine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20130516",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074761",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "KETOROLAC TROMETHAMINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20130516",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ketorolac tromethamine tablets and other treatment options before deciding to use ketorolac tromethamine tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals.",
"Description": "Ketorolac tromethamine is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-Benzoyl-2,3-dihydro-1 H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol, and the structural formula is:. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.41. Each tablet for oral administration contains 10 mg ketorolac tromethamine, USP. In addition, each tablet contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, croscarmellose sodium, glyceryl triacetate, hypromellose, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, sodium lauryl sulfate and titanium dioxide."
},
{
"NDCCode": "71335-1412-2",
"PackageDescription": "20 CAPSULE in 1 BOTTLE (71335-1412-2) ",
"NDC11Code": "71335-1412-02",
"ProductNDC": "71335-1412",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clindamycin Hydrochloride",
"NonProprietaryName": "Clindamycin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190107",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207402",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "CLINDAMYCIN HYDROCHLORIDE",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]",
"Status": "Active",
"LastUpdate": "2024-08-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200114",
"SamplePackage": "N",
"IndicationAndUsage": "Clindamycin is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin is also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of colitis, as described in the BOXED WARNING, before selecting clindamycin, the physician should consider the nature of the infection and the suitability of less toxic alternatives (e.g., erythromycin). Anaerobes: Serious respiratory tract infections such as empyema, anaerobic pneumonitis, and lung abscess; serious skin and soft tissue infections; septicemia; intra-abdominal infections such as peritonitis and intra-abdominal abscess (typically resulting from anaerobic organisms resident in the normal gastrointestinal tract); infections of the female pelvis and genital tract such as endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis, and postsurgical vaginal cuff infection. Streptococci: Serious respiratory tract infections; serious skin and soft tissue infections. Staphylococci: Serious respiratory tract infections; serious skin and soft tissue infections. Pneumococci: Serious respiratory tract infections. Bacteriologic studies should be performed to determine the causative organisms and their susceptibility to clindamycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clindamycin hydrochloride capsules USP and other antibacterial drugs, clindamycin hydrochloride capsules USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Clindamycin hydrochloride USP is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. Clindamycin hydrochloride capsules USP contain clindamycin hydrochloride USP equivalent to 75 mg, 150 mg, or 300 mg of clindamycin. Inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and talc. Composition of empty hard gelatin capsule shells: For 75 mg strength-size ‘3’: FD&C Blue 1, D&C Yellow 10, gelatin and water. For 150 mg Strength-Size ‘2’: titanium dioxide, FD&C Blue 1, D&C Yellow 10, gelatin and water. For 300 mg Strength-Size ‘0’: FD&C Blue 1, titanium dioxide, gelatin and water. The empty hard gelatin capsules are printed with TekPrint SW-0012 White Ink. Composition of imprinting ink [TekPrint SW-0012 White Ink] utilized for printing on the capsule shell are presented below: Shellac–NF, Dehydrated alcohol–USP, Isopropyl alcohol–USP, Butyl alcohol–NF, Propylene glycol–USP, Strong ammonia solution–NF, Purified water–USP, Potassium hydroxide–NF, Titanium dioxide USP. The structural formula is represented below:. The chemical name for clindamycin hydrochloride is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl- trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L- threo- α-D- galacto-octopyranoside monohydrochloride."
},
{
"NDCCode": "76420-737-01",
"PackageDescription": "1 KIT in 1 CARTON (76420-737-01) * 25 VIAL in 1 CARTON (70121-1049-5) / 1 mL in 1 VIAL * 10 mL in 1 VIAL, SINGLE-DOSE (0409-1162-18) * 10 VIAL, SINGLE-DOSE in 1 CARTON (55150-164-02) / 2 mL in 1 VIAL, SINGLE-DOSE * 10 VIAL, GLASS in 1 BOX (0407-1412-10) / 10 mL in 1 VIAL, GLASS * 25 POUCH in 1 CARTON (54365-400-32) / 1 APPLICATOR in 1 POUCH / 3 mL in 1 APPLICATOR * 5 mL in 1 POUCH",
"NDC11Code": "76420-0737-01",
"ProductNDC": "76420-737",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mlk F4-c",
"NonProprietaryName": "Bupivacaine Hydrochloride, Lidocaine Hydrochloride, Triamcinolone Acetonide, Iohexol, Isopropyl Alcohol, Chlorhexidine Gluconate",
"DosageFormName": "KIT",
"StartMarketingDate": "20240701",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Asclemed USA, Inc.",
"Status": "Deprecated",
"LastUpdate": "2024-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240701",
"SamplePackage": "N"
},
{
"NDCCode": "76420-738-01",
"PackageDescription": "1 KIT in 1 CARTON (76420-738-01) * 25 VIAL in 1 TRAY (63323-506-01) / 1 mL in 1 VIAL * 10 mL in 1 VIAL, SINGLE-DOSE (0409-1159-18) * 10 AMPULE in 1 CARTON (55150-158-72) / 2 mL in 1 AMPULE * 10 VIAL, GLASS in 1 BOX (0407-1412-10) / 10 mL in 1 VIAL, GLASS * 25 POUCH in 1 CARTON (54365-400-32) / 1 APPLICATOR in 1 POUCH / 3 mL in 1 APPLICATOR * 5 mL in 1 POUCH",
"NDC11Code": "76420-0738-01",
"ProductNDC": "76420-738",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dexlido M-c",
"NonProprietaryName": "Dexamethasone Sodium Phosphate, Lidocaine Hydrochloride, Bupivacaine Hydrochloride, Iohexol, Isopropyl Alcohol, Chlorhexidine Gluconate",
"DosageFormName": "KIT",
"StartMarketingDate": "20240701",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Asclemed USA, Inc.",
"Status": "Deprecated",
"LastUpdate": "2024-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240701",
"SamplePackage": "N"
},
{
"NDCCode": "0270-1412-15",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 PACKAGE (0270-1412-15) / 15 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00270-1412-15",
"ProductNDC": "0270-1412",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isovue-m",
"NonProprietaryName": "Iopamidol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRATHECAL",
"StartMarketingDate": "19851231",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018735",
"LabelerName": "Bracco Diagnostics Inc",
"SubstanceName": "IOPAMIDOL",
"StrengthNumber": "612",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-02-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19851231",
"SamplePackage": "N",
"IndicationAndUsage": "ISOVUE-M is indicated for: 1 Lumbar and thoracic myelography, and computed tomography (CT) myelography in adults and pediatric patients aged 2 years and older, 2 Cervical and total columnar myelography and CT myelography in adults, 3 CT cisternography in adults.",
"Description": "ISOVUE-M (iopamidol) injection is a radiographic contrast agent for intrathecal use. Iopamidol is designated chemically as (S)-N,N’-bis[2-hydroxy-1-(hydroxymethyl)-ethyl]-2,4,6- triiodo-5-lactamidoisophthalamide with a molecular weight of 777.09, an empirical formula of C17H22I3N3O8, and the following structural formula. ISOVUE-M is a sterile, clear, colorless to pale yellow solution available in two concentrations of iodine: 1 ISOVUE-M 200 mg iodine/mL: Each mL contains 408 mg iopamidol (providing 200 mg organically bound iodine) and the following inactive ingredients: 0.26 mg edetate calcium disodium (providing 0.029 mg sodium) and 1 mg tromethamine., 2 ISOVUE-M 300 mg iodine/mL: Each mL contains 612 mg iopamidol (providing 300 mg organically bound iodine) and the following inactive ingredients: 0.39 mg edetate calcium disodium (providing 0.043 mg sodium) and 1 mg tromethamine."
},
{
"NDCCode": "0407-1412-10",
"PackageDescription": "10 VIAL, GLASS in 1 BOX (0407-1412-10) / 10 mL in 1 VIAL, GLASS",
"NDC11Code": "00407-1412-10",
"ProductNDC": "0407-1412",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omnipaque",
"NonProprietaryName": "Iohexol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRA-ARTICULAR; INTRATHECAL; INTRAVASCULAR; INTRAVENOUS; ORAL; RECTAL",
"StartMarketingDate": "19851226",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018956",
"LabelerName": "GE Healthcare Inc.",
"SubstanceName": "IOHEXOL",
"StrengthNumber": "240",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19851226",
"SamplePackage": "N",
"IndicationAndUsage": "OMNIPAQUE is a radiographic contrast agent indicated for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular, and body cavity imaging procedures in adults and pediatric patients. (1).",
"Description": "Iohexol is a nonionic radiographic contrast agent available as: 1 OMNIPAQUE (iohexol) injection for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular, and body cavity use, 2 OMNIPAQUE (iohexol) oral solution for oral use."
},
{
"NDCCode": "0407-1412-20",
"PackageDescription": "10 VIAL, GLASS in 1 BOX (0407-1412-20) / 20 mL in 1 VIAL, GLASS",
"NDC11Code": "00407-1412-20",
"ProductNDC": "0407-1412",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omnipaque",
"NonProprietaryName": "Iohexol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRA-ARTICULAR; INTRATHECAL; INTRAVASCULAR; INTRAVENOUS; ORAL; RECTAL",
"StartMarketingDate": "19851226",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018956",
"LabelerName": "GE Healthcare Inc.",
"SubstanceName": "IOHEXOL",
"StrengthNumber": "240",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19851226",
"SamplePackage": "N",
"IndicationAndUsage": "OMNIPAQUE is a radiographic contrast agent indicated for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular, and body cavity imaging procedures in adults and pediatric patients. (1).",
"Description": "Iohexol is a nonionic radiographic contrast agent available as: 1 OMNIPAQUE (iohexol) injection for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular, and body cavity use, 2 OMNIPAQUE (iohexol) oral solution for oral use."
},
{
"NDCCode": "0407-1412-30",
"PackageDescription": "10 BOTTLE, PLASTIC in 1 BOX (0407-1412-30) / 50 mL in 1 BOTTLE, PLASTIC",
"NDC11Code": "00407-1412-30",
"ProductNDC": "0407-1412",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omnipaque",
"NonProprietaryName": "Iohexol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRA-ARTICULAR; INTRATHECAL; INTRAVASCULAR; INTRAVENOUS; ORAL; RECTAL",
"StartMarketingDate": "19851226",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018956",
"LabelerName": "GE Healthcare Inc.",
"SubstanceName": "IOHEXOL",
"StrengthNumber": "240",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19851226",
"SamplePackage": "N",
"IndicationAndUsage": "OMNIPAQUE is a radiographic contrast agent indicated for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular, and body cavity imaging procedures in adults and pediatric patients. (1).",
"Description": "Iohexol is a nonionic radiographic contrast agent available as: 1 OMNIPAQUE (iohexol) injection for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular, and body cavity use, 2 OMNIPAQUE (iohexol) oral solution for oral use."
},
{
"NDCCode": "0407-1412-33",
"PackageDescription": "10 BOTTLE, PLASTIC in 1 BOX (0407-1412-33) / 100 mL in 1 BOTTLE, PLASTIC",
"NDC11Code": "00407-1412-33",
"ProductNDC": "0407-1412",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omnipaque",
"NonProprietaryName": "Iohexol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRA-ARTICULAR; INTRATHECAL; INTRAVASCULAR; INTRAVENOUS; ORAL; RECTAL",
"StartMarketingDate": "19851226",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018956",
"LabelerName": "GE Healthcare Inc.",
"SubstanceName": "IOHEXOL",
"StrengthNumber": "240",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19851226",
"SamplePackage": "N",
"IndicationAndUsage": "OMNIPAQUE is a radiographic contrast agent indicated for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular, and body cavity imaging procedures in adults and pediatric patients. (1).",
"Description": "Iohexol is a nonionic radiographic contrast agent available as: 1 OMNIPAQUE (iohexol) injection for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular, and body cavity use, 2 OMNIPAQUE (iohexol) oral solution for oral use."
},
{
"NDCCode": "0407-1412-34",
"PackageDescription": "10 BOTTLE, PLASTIC in 1 BOX (0407-1412-34) / 150 mL in 1 BOTTLE, PLASTIC",
"NDC11Code": "00407-1412-34",
"ProductNDC": "0407-1412",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omnipaque",
"NonProprietaryName": "Iohexol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRA-ARTICULAR; INTRATHECAL; INTRAVASCULAR; INTRAVENOUS; ORAL; RECTAL",
"StartMarketingDate": "19851226",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018956",
"LabelerName": "GE Healthcare Inc.",
"SubstanceName": "IOHEXOL",
"StrengthNumber": "240",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19851226",
"EndMarketingDatePackage": "20250304",
"SamplePackage": "N",
"IndicationAndUsage": "OMNIPAQUE is a radiographic contrast agent indicated for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular, and body cavity imaging procedures in adults and pediatric patients. (1).",
"Description": "Iohexol is a nonionic radiographic contrast agent available as: 1 OMNIPAQUE (iohexol) injection for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular, and body cavity use, 2 OMNIPAQUE (iohexol) oral solution for oral use."
},
{
"NDCCode": "0407-1412-35",
"PackageDescription": "10 BOTTLE, PLASTIC in 1 BOX (0407-1412-35) / 200 mL in 1 BOTTLE, PLASTIC",
"NDC11Code": "00407-1412-35",
"ProductNDC": "0407-1412",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omnipaque",
"NonProprietaryName": "Iohexol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRA-ARTICULAR; INTRATHECAL; INTRAVASCULAR; INTRAVENOUS; ORAL; RECTAL",
"StartMarketingDate": "19851226",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018956",
"LabelerName": "GE Healthcare Inc.",
"SubstanceName": "IOHEXOL",
"StrengthNumber": "240",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-10-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "19851226",
"EndMarketingDatePackage": "20241024",
"SamplePackage": "N",
"IndicationAndUsage": "OMNIPAQUE (iohexol) injection is a radiographic contrast agent indicated for intrathecal, intravascular, oral, rectal, intraarticular and body cavity use. OMNIPAQUE oral solution is indicated for oral use only in conjunction with OMNIPAQUE injection administered intravenously for computed tomography (CT) of the abdomen (1).",
"Description": "OMNIPAQUE (iohexol) injection is a nonionic, x-ray or radiographic contrast medium for intrathecal, intravenous, oral, rectal and body cavity use. OMNIPAQUE oral solution is for oral use only. OMNIPAQUE injection and OMNIPAQUE oral solution are both provided as sterile, pyrogen-free and gluten-free solutions. OMNIPAQUE injection and OMNIPAQUE oral solution are colorless to pale yellow solutions. The chemical name of iohexol is Bis(2,3-dihydroxypropyl)-5-[N-(2,3-dihydroxypropyl)-acetamido]-2,4,6- triiodoisophthalamide with a molecular weight of 821.14 (iodine content 46.36%). Iohexol has the following structural formula. OMNIPAQUE injection is available in five strengths: : 1 OMNIPAQUE 140 mg iodine/mL (302 mg of iohexol/mL): Each mL contains 140 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 2 OMNIPAQUE 180 mg iodine/mL (388 mg of iohexol/mL): Each mL contains 180 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 3 OMNIPAQUE 240 mg iodine/mL (518 mg of iohexol/mL): Each mL contains 240 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 4 OMNIPAQUE 300 mg iodine/mL (647 mg of iohexol/mL): Each mL contains 300 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 5 OMNIPAQUE 350 mg iodine/mL (755 mg of iohexol/mL): Each mL contains 350 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium."
},
{
"NDCCode": "0407-1412-38",
"PackageDescription": "10 BOTTLE, PLASTIC in 1 BOX (0407-1412-38) / 50 mL in 1 BOTTLE, PLASTIC",
"NDC11Code": "00407-1412-38",
"ProductNDC": "0407-1412",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omnipaque",
"NonProprietaryName": "Iohexol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRATHECAL; INTRAVASCULAR; INTRAVENOUS; ORAL",
"StartMarketingDate": "20050811",
"EndMarketingDate": "20241110",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018956",
"LabelerName": "GE Healthcare Inc.",
"SubstanceName": "IOHEXOL",
"StrengthNumber": "240",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-11-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20050811",
"EndMarketingDatePackage": "20241110",
"SamplePackage": "N",
"IndicationAndUsage": "OMNIPAQUE (iohexol) injection is a radiographic contrast agent indicated for intrathecal, intravascular, oral, rectal, intraarticular and body cavity use. OMNIPAQUE oral solution is indicated for oral use only in conjunction with OMNIPAQUE injection administered intravenously for computed tomography (CT) of the abdomen ( 1).",
"Description": "OMNIPAQUE (iohexol) injection is a nonionic, x-ray or radiographic contrast medium for intrathecal, intravenous, oral, rectal and body cavity use. OMNIPAQUE oral solution is for oral use only. OMNIPAQUE injection and OMNIPAQUE oral solution are both provided as sterile, pyrogen-free and gluten-free solutions. OMNIPAQUE injection and OMNIPAQUE oral solution are colorless to pale yellow solutions. The chemical name of iohexol is Bis(2,3-dihydroxypropyl)-5-[ N-(2,3-dihydroxypropyl)-acetamido]-2,4,6- triiodoisophthalamide with a molecular weight of 821.14 (iodine content 46.36%). Iohexol has the following structural formula:. OMNIPAQUE injection is available in five strengths: 1 OMNIPAQUE 140 mg iodine/mL (302 mg of iohexol/mL): Each mL contains 140 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 2 OMNIPAQUE 180 mg iodine/mL (388 mg of iohexol/mL): Each mL contains 180 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 3 OMNIPAQUE 240 mg iodine/mL (518 mg of iohexol/mL): Each mL contains 240 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 4 OMNIPAQUE 300 mg iodine/mL (647 mg of iohexol/mL): Each mL contains 300 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 5 OMNIPAQUE 350 mg iodine/mL (755 mg of iohexol/mL): Each mL contains 350 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium."
},
{
"NDCCode": "22840-1412-1",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (22840-1412-1) ",
"NDC11Code": "22840-1412-01",
"ProductNDC": "22840-1412",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "White Alder Pollen",
"NonProprietaryName": "Alnus Rhombifolia",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "ALNUS RHOMBIFOLIA POLLEN",
"StrengthNumber": ".001",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.",
"Description": "Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter."
},
{
"NDCCode": "50090-1412-0",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (50090-1412-0) ",
"NDC11Code": "50090-1412-00",
"ProductNDC": "50090-1412",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20130321",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202519",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "HYDROCHLOROTHIAZIDE; VALSARTAN",
"StrengthNumber": "12.5; 160",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20141128",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the angiotensin II receptor blocker (ARB) class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality have also been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy Valsartan and hydrochlorothiazide tablets may be substituted for the titrated components. Initial Therapy Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320 mg/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of < 140 mmHg (systolic) and 60% likelihood of achieving < 90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on hydrochlorothiazide alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rise to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).",
"Description": "Valsartan and hydrochlorothiazide is a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl)[1,1΄-biphenyl]-4-yl]methyl]-L-Valine. Its molecular formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan USP is a white, fine hygroscopic powder. It is soluble in ethanol and methanol and practically insoluble in water. Hydrochlorothiazide USP is a white or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its molecular formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is:Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium lauryl sulfate, talc, and titanium dioxide. In addition, the 80 mg/12.5 mg and 160 mg/12.5 mg contains iron oxide red and iron oxide yellow, the 160 mg/25 mg contains iron oxide black, iron oxide red, and iron oxide yellow, 320 mg/12.5 mg contains iron oxide black and iron oxide red, and the 320 mg/25 mg contains iron oxide yellow."
},
{
"NDCCode": "50090-1412-1",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (50090-1412-1) ",
"NDC11Code": "50090-1412-01",
"ProductNDC": "50090-1412",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20130321",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202519",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "HYDROCHLOROTHIAZIDE; VALSARTAN",
"StrengthNumber": "12.5; 160",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20141128",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the angiotensin II receptor blocker (ARB) class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality have also been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy Valsartan and hydrochlorothiazide tablets may be substituted for the titrated components. Initial Therapy Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320 mg/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of < 140 mmHg (systolic) and 60% likelihood of achieving < 90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on hydrochlorothiazide alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rise to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).",
"Description": "Valsartan and hydrochlorothiazide is a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl)[1,1΄-biphenyl]-4-yl]methyl]-L-Valine. Its molecular formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan USP is a white, fine hygroscopic powder. It is soluble in ethanol and methanol and practically insoluble in water. Hydrochlorothiazide USP is a white or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its molecular formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is:Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium lauryl sulfate, talc, and titanium dioxide. In addition, the 80 mg/12.5 mg and 160 mg/12.5 mg contains iron oxide red and iron oxide yellow, the 160 mg/25 mg contains iron oxide black, iron oxide red, and iron oxide yellow, 320 mg/12.5 mg contains iron oxide black and iron oxide red, and the 320 mg/25 mg contains iron oxide yellow."
},
{
"NDCCode": "51662-1412-1",
"PackageDescription": "10 mL in 1 VIAL, SINGLE-DOSE (51662-1412-1) ",
"NDC11Code": "51662-1412-01",
"ProductNDC": "51662-1412",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hci And Epinephrine With Epinephrine",
"NonProprietaryName": "Lidocaine Hci And Epinephrine With Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20191014",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA006488",
"LabelerName": "HF Acquisition Co LLC, DBA HealthFirst",
"SubstanceName": "EPINEPHRINE BITARTRATE; LIDOCAINE HYDROCHLORIDE ANHYDROUS",
"StrengthNumber": ".005; 20",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191014",
"SamplePackage": "N",
"IndicationAndUsage": "Xylocaine (lidocaine HCl) Injections are indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.",
"Description": "Xylocaine (lidocaine HCl) Injections are sterile, nonpyrogenic, aqueous solutions that contain a local anesthetic agent with or without epinephrine and are administered parenterally by injection. See INDICATIONS & USAGE section for specific uses. Xylocaine solutions contain lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C 14H 22N 2O HCl) has the following structural formula. Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21. Epinephrine (C 9H 13NO 3) has the following structural formula. Dosage forms listed as Xylocaine-MPF indicate single dose solutions that are Methyl Paraben Free (MPF). Xylocaine MPF is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. Xylocaine in multiple dose vials: Each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Xylocaine MPF with Epinephrine is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer. Xylocaine with Epinephrine in multiple dose vials: Each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid. Filled under nitrogen."
},
{
"NDCCode": "72162-1000-2",
"PackageDescription": "120 CAPSULE in 1 BOTTLE (72162-1000-2) ",
"NDC11Code": "72162-1000-02",
"ProductNDC": "72162-1000",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Icosapent Ethyl",
"NonProprietaryName": "Icosapent Ethyl",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20201104",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209457",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ICOSAPENT ETHYL",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Status": "Active",
"LastUpdate": "2026-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241224",
"SamplePackage": "N",
"IndicationAndUsage": "Icosapent ethyl is indicated: 1 as an adjunct to diet to reduce triglyceride (TG) levels in adult patients with severe (≥500 mg/dL) hypertriglyceridemia. .",
"Description": "Icosapent ethyl, a lipid-regulating agent, is supplied as a 0.5 gram and 1 gram, liquid-filled soft gelatin capsule for oral administration. Each icosapent ethyl capsule contains either 0.5 grams of icosapent ethyl or 1 gram of icosapent ethyl. Icosapent ethyl is an ethyl ester of the omega-3 fatty acid eicosapentaenoic acid (EPA). The empirical formula of icosapent ethyl is C22H34O2 and the molecular weight is 330.5. The chemical name for icosapent ethyl is ethyl all-cis-5,8,11,14,17-icosapentaenoate with the following chemical structure. Each capsule contains the following inactive ingredients: gelatin, glycerin, purified water, sorbitol, sorbitan and tocopherol. The monogramming ink ingredients contain: ammonium hydroxide, iron oxide black, isopropyl alcohol, macrogol, polyvinyl acetate phthalate, propylene glycol, purified water and SDA alcohol (ethanol and ethyl acetate)."
},
{
"NDCCode": "72162-1048-2",
"PackageDescription": "1 TUBE in 1 CARTON (72162-1048-2) / 45 g in 1 TUBE",
"NDC11Code": "72162-1048-02",
"ProductNDC": "72162-1048",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Adapalene",
"NonProprietaryName": "Adapalene",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20100630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090824",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ADAPALENE",
"StrengthNumber": "1",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Active",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240223",
"SamplePackage": "N",
"IndicationAndUsage": "Adapalene cream is indicated for the topical treatment of acne vulgaris.",
"Description": "Adapalene cream, 0.1%, contains adapalene 0.1% in an aqueous cream emulsion consisting of carbomer 934P, cyclomethicone, edetate disodium, glycerin, methyl glucose sesquistearate, methylparaben, PEG-20 methyl glucose sesquistearate, phenoxyethanol, propylparaben, purified water, squalane, and trolamine. The chemical name of adapalene is 6-[3-(1-adamantyl)-4-methoxyphenyl]-2-naphthoic acid. It is a white to off-white powder which is soluble in tetrahydrofuran, sparingly soluble in ethanol, and practically insoluble in water. The molecular formula is C28H28O3 and molecular weight is 412.52. Adapalene is represented by the following structural formula:."
},
{
"NDCCode": "72162-1059-2",
"PackageDescription": "45 TABLET, EXTENDED RELEASE in 1 BOTTLE (72162-1059-2) ",
"NDC11Code": "72162-1059-02",
"ProductNDC": "72162-1059",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alprazolam",
"ProprietaryNameSuffix": "Extended Release",
"NonProprietaryName": "Alprazolam",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20070312",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078056",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ALPRAZOLAM",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2023-05-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230508",
"SamplePackage": "N",
"Description": "Alprazolam extended-release tablets, USP contain alprazolam, USP which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-α] [1,4] benzodiazepine. The molecular formula is C17H13ClN4 which corresponds to a molecular weight of 308.76. The structural formula is represented below. Alprazolam, USP is a white crystalline powder, which is soluble in methanol or ethanol but which has no appreciable solubility in water at physiological pH. Each alprazolam extended-release tablet USP, for oral administration, contains 0.5 mg, 1 mg, 2 mg, or 3 mg of alprazolam, USP. The inactive ingredients are lactose monohydrate, hypromellose, and magnesium stearate. In addition, the 1 mg tablets also contain D&C yellow #10 aluminum lake. The 2 mg tablets also contain FD&C Yellow #6 aluminum lake, and the 3 mg tablets also contain D&C Yellow #10 aluminum lake, and FD&C Blue #2 aluminum lake. Product meets USP Dissolution Test 2."
},
{
"NDCCode": "72162-1071-2",
"PackageDescription": "1 TUBE in 1 CARTON (72162-1071-2) / 45 g in 1 TUBE",
"NDC11Code": "72162-1071-02",
"ProductNDC": "72162-1071",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tretinoin",
"NonProprietaryName": "Tretinoin",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20190812",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA017955",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "TRETINOIN",
"StrengthNumber": ".1",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241224",
"SamplePackage": "N",
"IndicationAndUsage": "Tretinoin is indicated for topical application in the treatment of acne vulgaris. The safety and efficacy of the long-term use of this product in the treatment of other disorders have not been established.",
"Description": "Tretinoin Cream and Tretinoin Gel are used for the topical treatment of acne vulgaris. Tretinoin Gel contains tretinoin (retinoic acid, vitamin A acid) in either of two strengths, 0.025% or 0.01% by weight, in a gel vehicle of butylated hydroxytoluene, hydroxypropyl cellulose and alcohol (denatured with tert-butyl alcohol and brucine sulfate) 90% w/w. Tretinoin Cream contains tretinoin in one of three strengths, 0.1%, 0.05%, or 0.025% by weight, in a hydrophilic cream vehicle of stearic acid, isopropyl myristate, polyoxyl 40 stearate, stearyl alcohol, xanthan gum, sorbic acid, butylated hydroxytoluene, and purified water. Chemically, tretinoin is all-trans-retinoic acid and has the following structure:."
},
{
"NDCCode": "72162-1072-2",
"PackageDescription": "1 TUBE in 1 CARTON (72162-1072-2) / 45 g in 1 TUBE",
"NDC11Code": "72162-1072-02",
"ProductNDC": "72162-1072",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tretinoin",
"NonProprietaryName": "Tretinoin",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20190712",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA017579",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "TRETINOIN",
"StrengthNumber": ".25",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241224",
"SamplePackage": "N",
"IndicationAndUsage": "Tretinoin is indicated for topical application in the treatment of acne vulgaris. The safety and efficacy of the long-term use of this product in the treatment of other disorders have not been established.",
"Description": "Tretinoin Cream and Tretinoin Gel are used for the topical treatment of acne vulgaris. Tretinoin Gel contains tretinoin (retinoic acid, vitamin A acid) in either of two strengths, 0.025% or 0.01% by weight, in a gel vehicle of butylated hydroxytoluene, hydroxypropyl cellulose and alcohol (denatured with tert-butyl alcohol and brucine sulfate) 90% w/w. Tretinoin Cream contains tretinoin in one of three strengths, 0.1%, 0.05%, or 0.025% by weight, in a hydrophilic cream vehicle of stearic acid, isopropyl myristate, polyoxyl 40 stearate, stearyl alcohol, xanthan gum, sorbic acid, butylated hydroxytoluene, and purified water. Chemically, tretinoin is all-trans-retinoic acid and has the following structure:."
},
{
"NDCCode": "72162-1076-2",
"PackageDescription": "90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (72162-1076-2) ",
"NDC11Code": "72162-1076-02",
"ProductNDC": "72162-1076",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride",
"NonProprietaryName": "Potassium Chloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20200102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208864",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2024-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240405",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium chloride extended-release capsules are indicated for the treatment and prophylaxis of hypokalemia in adults and children with or without metabolic alkalosis, in patients for whom dietary management with potassium-rich foods or diuretic dose reduction is insufficient.",
"Description": "Potassium chloride extended-release capsules, USP, are an oral dosage form of microencapsulated potassium chloride containing 600 mg and 750 mg of potassium chloride, USP, equivalent to 8 mEq and 10 mEq of potassium, respectively. The chemical name of the active ingredient is potassium chloride and the structural formula is KCl. It has a molecular mass of 74.55. Potassium chloride, USP, occurs as a white granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Inactive ingredients: ethylcellulose, gelatin, magnesium stearate, sodium lauryl sulfate, titanium dioxide and edible black ink. The 10 mEq capsules also contain black iron oxide, FD&C blue No.1 and FD&C red No.3."
},
{
"NDCCode": "72162-1085-2",
"PackageDescription": "30 mL in 1 BOTTLE, PLASTIC (72162-1085-2) ",
"NDC11Code": "72162-1085-02",
"ProductNDC": "72162-1085",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methadone Hydrocloride",
"ProprietaryNameSuffix": "Dye-free, Sugar-free, Unflavored",
"NonProprietaryName": "Methadone Hydrochloride",
"DosageFormName": "CONCENTRATE",
"RouteName": "ORAL",
"StartMarketingDate": "20201102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212093",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "METHADONE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231005",
"SamplePackage": "N",
"IndicationAndUsage": "Methadone Hydrochloride contains methadone, an opioid agonist indicated for the: 1 detoxification treatment of opioid addiction (heroin or other morphine-like drugs)., 2 maintenance treatment of opioid addiction (heroin or other morphine-like drugs), in conjunction with appropriate social and medical services.",
"Description": "Methadone Hydrochloride Oral Concentrate, USP dye-free, sugar-free, unflavored contains methadone, an opioid agonist, and is available as a dye-free, sugar-free, unflavored liquid concentrate of methadone hydrochloride for oral administration. Methadone hydrochloride is chemically described as 6-(dimethylamino)-4,4-diphenyl-3-heptone hydrochloride. Methadone hydrochloride, USP is a fine white powder. It is very soluble in water, soluble in isopropanol and in chloroform, and practically insoluble in ether and in glycerine. It is present in Methadone Hydrochloride as the racemic mixture. Methadone hydrochloride has a melting point of 235°C, a pKa of 8.25 in water at 20°C, a solution (1 part per 100) pH between 4.5 and 6.5, a partition coefficient of 117 at pH 7.4 in octanol/water and a molecular weight of 345.91. Its structural formula is C21H27NOHCl. This liquid concentrate contains 10 mg of methadone hydrochloride (equivalent to 8.95 mg of methadone) per mL and the following inactive ingredients: citric acid anhydrous, purified water, sodium benzoate."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>72162-1412-2</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (72162-1412-2) / 118.28 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>72162-1412-02</NDC11Code>
<ProductNDC>72162-1412</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluocinolone Acetonide</ProprietaryName>
<NonProprietaryName>Fluocinolone Acetonide</NonProprietaryName>
<DosageFormName>OIL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170614</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202848</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>FLUOCINOLONE ACETONIDE</SubstanceName>
<StrengthNumber>.01</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240313</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluocinolone Acetonide Topical Oil, 0.01% is a low to medium potency corticosteroid indicated. In adult patients for the treatment of psoriasis of the scalp (Scalp Oil).</IndicationAndUsage>
<Description>Fluocinolone Acetonide Topical Oil, 0.01% contains fluocinolone acetonide {(6α, 11β, 16α)-6,9-difluoro-11, 21-dihydroxy-16,17[(1-methylethylidene)bis(oxy)]-pregna-1,4-diene-3,20-dione, cyclic 16,17 acetal with acetone}, a synthetic corticosteroid for topical dermatologic use. This formulation is also marketed as Fluocinolone Acetonide Topical Oil, 0.01% (Body Oil) for atopic dermatitis in adults and for moderate to severe atopic dermatitis in pediatric patients 2 years and older, and as Fluocinolone Acetonide Oil, 0.01% (Ear Drops) for chronic eczematous external otitis. Chemically, fluocinolone acetonide is C24H30F2O6. It has the following structural formula. Fluocinolone acetonide in Fluocinolone Acetonide Topical Oil, 0.01% has a molecular weight of 452.50. It is a white crystalline powder that is odorless, stable in light, and melts at 270°C with decomposition; soluble in alcohol, acetone and methanol; slightly soluble in chloroform; insoluble in water. Each gram of Fluocinolone Acetonide Topical Oil, 0.01% contains approximately 0.11 mg of fluocinolone acetonide in a blend of oils, which contains isopropyl alcohol, isopropyl myristate, light mineral oil, oleth-2 and refined peanut oil NF. Each packaged product contains 2 shower caps. The shower cap is made of low density polyethylene material with rubber elastic.</Description>
</NDC>
<NDC>
<NDCCode>36987-1412-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (36987-1412-2)</PackageDescription>
<NDC11Code>36987-1412-02</NDC11Code>
<ProductNDC>36987-1412</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Broccoli</ProprietaryName>
<NonProprietaryName>Broccoli</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>BROCCOLI</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Vegetable Proteins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>37662-1412-2</NDCCode>
<PackageDescription>1200 PELLET in 1 BOTTLE, GLASS (37662-1412-2) </PackageDescription>
<NDC11Code>37662-1412-02</NDC11Code>
<ProductNDC>37662-1412</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Saccharum Lactis</ProprietaryName>
<NonProprietaryName>Saccharum Lactis</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220823</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>LACTOSE, UNSPECIFIED FORM</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220823</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>51662-1412-3</NDCCode>
<PackageDescription>25 POUCH in 1 BOX (51662-1412-3) / 1 VIAL, SINGLE-DOSE in 1 POUCH (51662-1412-2) / 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>51662-1412-03</NDC11Code>
<ProductNDC>51662-1412</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hci And Epinephrine With Epinephrine</ProprietaryName>
<NonProprietaryName>Lidocaine Hci And Epinephrine With Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20191014</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA006488</ApplicationNumber>
<LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
<SubstanceName>EPINEPHRINE BITARTRATE; LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
<StrengthNumber>.005; 20</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220316</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Xylocaine (lidocaine HCl) Injections are indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.</IndicationAndUsage>
<Description>Xylocaine (lidocaine HCl) Injections are sterile, nonpyrogenic, aqueous solutions that contain a local anesthetic agent with or without epinephrine and are administered parenterally by injection. See INDICATIONS & USAGE section for specific uses. Xylocaine solutions contain lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C 14H 22N 2O HCl) has the following structural formula. Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21. Epinephrine (C 9H 13NO 3) has the following structural formula. Dosage forms listed as Xylocaine-MPF indicate single dose solutions that are Methyl Paraben Free (MPF). Xylocaine MPF is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. Xylocaine in multiple dose vials: Each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Xylocaine MPF with Epinephrine is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer. Xylocaine with Epinephrine in multiple dose vials: Each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid. Filled under nitrogen.</Description>
</NDC>
<NDC>
<NDCCode>62991-1412-2</NDCCode>
<PackageDescription>25 g in 1 JAR (62991-1412-2) </PackageDescription>
<NDC11Code>62991-1412-02</NDC11Code>
<ProductNDC>62991-1412</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Testosterone Propionate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20110427</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>LETCO MEDICAL, LLC</LabelerName>
<SubstanceName>TESTOSTERONE PROPIONATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<DEASchedule>CIII</DEASchedule>
<Status>Unfinished</Status>
<LastUpdate>2026-06-15</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>27-APR-11</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>63479-1412-2</NDCCode>
<PackageDescription>30 mL in 1 BOTTLE, GLASS (63479-1412-2) </PackageDescription>
<NDC11Code>63479-1412-02</NDC11Code>
<ProductNDC>63479-1412</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>N12</ProprietaryName>
<ProprietaryNameSuffix>Immunosode</ProprietaryNameSuffix>
<NonProprietaryName>Arsenic Trioxide, Baptisia Tinctoria Root, Sus Scrofa Bone Marrow, Bryonia Alba Root, Echinacea Angustifolia, Echinacea Purpurea, Olea Europaea Flower, Ulex Europaeus, Flower, Lachesis Muta Venom, Levisticum Officinale, Treponemic Skin Canker Human</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>SUBLINGUAL</RouteName>
<StartMarketingDate>20240115</StartMarketingDate>
<EndMarketingDate>20250528</EndMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Apex Energetics Inc.</LabelerName>
<SubstanceName>ARSENIC TRIOXIDE; BAPTISIA TINCTORIA ROOT; BILBERRY; BRYONIA ALBA ROOT; ECHINACEA ANGUSTIFOLIA; ECHINACEA PURPUREA; GONORRHEAL URETHRAL SECRETION HUMAN; LACHESIS MUTA VENOM; LEVISTICUM OFFICINALE; OLEA EUROPAEA FLOWER; RANCID BEEF; SALMONELLA ENTERICA ENTERICA SEROVAR TYPHI; STAPHYLOCOCCUS EPIDERMIDIS; STAPHYLOCOCCUS HAEMOLYTICUS; STAPHYLOCOCCUS SIMULANS; STREPTOCOCCUS PYOGENES; SULFUR; SUS SCROFA BONE MARROW; SUS SCROFA SPLEEN; THUJA OCCIDENTALIS LEAFY TWIG; TREPONEMIC SKIN CANKER HUMAN; TUBERCULIN PURIFIED PROTEIN DERIVATIVE; ULEX EUROPAEUS FLOWER; VACCINIA VIRUS STRAIN NEW YORK CITY BOARD OF HEALTH LIVE ANTIGEN; VISCUM ALBUM FRUITING TOP</SubstanceName>
<StrengthNumber>30; 15; 30; 30; 9; 9; 30; 30; 12; 30; 30; 60; 30; 30; 30; 30; 30; 7; 7; 30; 30; 30; 30; 30; 12</StrengthNumber>
<StrengthUnit>[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_C]/mL; [hp_C]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL</StrengthUnit>
<Pharm_Classes>Actively Acquired Immunity [PE], Antigens, Bacterial [CS], Cell-mediated Immunity [PE], Live Vaccinia Virus Vaccine [EPC], Skin Test Antigen [EPC], Smallpox Vaccine [CS], Tuberculosis Skin Test [EPC], Vaccines, Live, Unattenuated [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-05-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20240115</StartMarketingDatePackage>
<EndMarketingDatePackage>20250528</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>67296-1412-2</NDCCode>
<PackageDescription>20 TABLET, FILM COATED in 1 BOTTLE (67296-1412-2) </PackageDescription>
<NDC11Code>67296-1412-02</NDC11Code>
<ProductNDC>67296-1412</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
<NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130516</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074761</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ketorolac tromethamine tablets and other treatment options before deciding to use ketorolac tromethamine tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals.</IndicationAndUsage>
<Description>Ketorolac tromethamine is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-Benzoyl-2,3-dihydro-1 H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol, and the structural formula is:. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.41. Each tablet for oral administration contains 10 mg ketorolac tromethamine, USP. In addition, each tablet contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, croscarmellose sodium, glyceryl triacetate, hypromellose, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, sodium lauryl sulfate and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>67296-1412-9</NDCCode>
<PackageDescription>2 TABLET, FILM COATED in 1 BOTTLE (67296-1412-9) </PackageDescription>
<NDC11Code>67296-1412-09</NDC11Code>
<ProductNDC>67296-1412</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
<NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130516</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074761</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130516</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ketorolac tromethamine tablets and other treatment options before deciding to use ketorolac tromethamine tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals.</IndicationAndUsage>
<Description>Ketorolac tromethamine is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-Benzoyl-2,3-dihydro-1 H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol, and the structural formula is:. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.41. Each tablet for oral administration contains 10 mg ketorolac tromethamine, USP. In addition, each tablet contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, croscarmellose sodium, glyceryl triacetate, hypromellose, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, sodium lauryl sulfate and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>71335-1412-2</NDCCode>
<PackageDescription>20 CAPSULE in 1 BOTTLE (71335-1412-2) </PackageDescription>
<NDC11Code>71335-1412-02</NDC11Code>
<ProductNDC>71335-1412</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clindamycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Clindamycin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190107</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207402</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>CLINDAMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200114</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clindamycin is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin is also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of colitis, as described in the BOXED WARNING, before selecting clindamycin, the physician should consider the nature of the infection and the suitability of less toxic alternatives (e.g., erythromycin). Anaerobes: Serious respiratory tract infections such as empyema, anaerobic pneumonitis, and lung abscess; serious skin and soft tissue infections; septicemia; intra-abdominal infections such as peritonitis and intra-abdominal abscess (typically resulting from anaerobic organisms resident in the normal gastrointestinal tract); infections of the female pelvis and genital tract such as endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis, and postsurgical vaginal cuff infection. Streptococci: Serious respiratory tract infections; serious skin and soft tissue infections. Staphylococci: Serious respiratory tract infections; serious skin and soft tissue infections. Pneumococci: Serious respiratory tract infections. Bacteriologic studies should be performed to determine the causative organisms and their susceptibility to clindamycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clindamycin hydrochloride capsules USP and other antibacterial drugs, clindamycin hydrochloride capsules USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Clindamycin hydrochloride USP is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. Clindamycin hydrochloride capsules USP contain clindamycin hydrochloride USP equivalent to 75 mg, 150 mg, or 300 mg of clindamycin. Inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and talc. Composition of empty hard gelatin capsule shells: For 75 mg strength-size ‘3’: FD&C Blue 1, D&C Yellow 10, gelatin and water. For 150 mg Strength-Size ‘2’: titanium dioxide, FD&C Blue 1, D&C Yellow 10, gelatin and water. For 300 mg Strength-Size ‘0’: FD&C Blue 1, titanium dioxide, gelatin and water. The empty hard gelatin capsules are printed with TekPrint SW-0012 White Ink. Composition of imprinting ink [TekPrint SW-0012 White Ink] utilized for printing on the capsule shell are presented below: Shellac–NF, Dehydrated alcohol–USP, Isopropyl alcohol–USP, Butyl alcohol–NF, Propylene glycol–USP, Strong ammonia solution–NF, Purified water–USP, Potassium hydroxide–NF, Titanium dioxide USP. The structural formula is represented below:. The chemical name for clindamycin hydrochloride is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl- trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L- threo- α-D- galacto-octopyranoside monohydrochloride.</Description>
</NDC>
<NDC>
<NDCCode>76420-737-01</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (76420-737-01) * 25 VIAL in 1 CARTON (70121-1049-5) / 1 mL in 1 VIAL * 10 mL in 1 VIAL, SINGLE-DOSE (0409-1162-18) * 10 VIAL, SINGLE-DOSE in 1 CARTON (55150-164-02) / 2 mL in 1 VIAL, SINGLE-DOSE * 10 VIAL, GLASS in 1 BOX (0407-1412-10) / 10 mL in 1 VIAL, GLASS * 25 POUCH in 1 CARTON (54365-400-32) / 1 APPLICATOR in 1 POUCH / 3 mL in 1 APPLICATOR * 5 mL in 1 POUCH</PackageDescription>
<NDC11Code>76420-0737-01</NDC11Code>
<ProductNDC>76420-737</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mlk F4-c</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride, Lidocaine Hydrochloride, Triamcinolone Acetonide, Iohexol, Isopropyl Alcohol, Chlorhexidine Gluconate</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20240701</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2024-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>76420-738-01</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (76420-738-01) * 25 VIAL in 1 TRAY (63323-506-01) / 1 mL in 1 VIAL * 10 mL in 1 VIAL, SINGLE-DOSE (0409-1159-18) * 10 AMPULE in 1 CARTON (55150-158-72) / 2 mL in 1 AMPULE * 10 VIAL, GLASS in 1 BOX (0407-1412-10) / 10 mL in 1 VIAL, GLASS * 25 POUCH in 1 CARTON (54365-400-32) / 1 APPLICATOR in 1 POUCH / 3 mL in 1 APPLICATOR * 5 mL in 1 POUCH</PackageDescription>
<NDC11Code>76420-0738-01</NDC11Code>
<ProductNDC>76420-738</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dexlido M-c</ProprietaryName>
<NonProprietaryName>Dexamethasone Sodium Phosphate, Lidocaine Hydrochloride, Bupivacaine Hydrochloride, Iohexol, Isopropyl Alcohol, Chlorhexidine Gluconate</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20240701</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2024-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0270-1412-15</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 PACKAGE (0270-1412-15) / 15 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00270-1412-15</NDC11Code>
<ProductNDC>0270-1412</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isovue-m</ProprietaryName>
<NonProprietaryName>Iopamidol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRATHECAL</RouteName>
<StartMarketingDate>19851231</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018735</ApplicationNumber>
<LabelerName>Bracco Diagnostics Inc</LabelerName>
<SubstanceName>IOPAMIDOL</SubstanceName>
<StrengthNumber>612</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19851231</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ISOVUE-M is indicated for: 1 Lumbar and thoracic myelography, and computed tomography (CT) myelography in adults and pediatric patients aged 2 years and older, 2 Cervical and total columnar myelography and CT myelography in adults, 3 CT cisternography in adults.</IndicationAndUsage>
<Description>ISOVUE-M (iopamidol) injection is a radiographic contrast agent for intrathecal use. Iopamidol is designated chemically as (S)-N,N’-bis[2-hydroxy-1-(hydroxymethyl)-ethyl]-2,4,6- triiodo-5-lactamidoisophthalamide with a molecular weight of 777.09, an empirical formula of C17H22I3N3O8, and the following structural formula. ISOVUE-M is a sterile, clear, colorless to pale yellow solution available in two concentrations of iodine: 1 ISOVUE-M 200 mg iodine/mL: Each mL contains 408 mg iopamidol (providing 200 mg organically bound iodine) and the following inactive ingredients: 0.26 mg edetate calcium disodium (providing 0.029 mg sodium) and 1 mg tromethamine., 2 ISOVUE-M 300 mg iodine/mL: Each mL contains 612 mg iopamidol (providing 300 mg organically bound iodine) and the following inactive ingredients: 0.39 mg edetate calcium disodium (providing 0.043 mg sodium) and 1 mg tromethamine.</Description>
</NDC>
<NDC>
<NDCCode>0407-1412-10</NDCCode>
<PackageDescription>10 VIAL, GLASS in 1 BOX (0407-1412-10) / 10 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>00407-1412-10</NDC11Code>
<ProductNDC>0407-1412</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omnipaque</ProprietaryName>
<NonProprietaryName>Iohexol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRA-ARTICULAR; INTRATHECAL; INTRAVASCULAR; INTRAVENOUS; ORAL; RECTAL</RouteName>
<StartMarketingDate>19851226</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018956</ApplicationNumber>
<LabelerName>GE Healthcare Inc.</LabelerName>
<SubstanceName>IOHEXOL</SubstanceName>
<StrengthNumber>240</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19851226</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>OMNIPAQUE is a radiographic contrast agent indicated for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular, and body cavity imaging procedures in adults and pediatric patients. (1).</IndicationAndUsage>
<Description>Iohexol is a nonionic radiographic contrast agent available as: 1 OMNIPAQUE (iohexol) injection for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular, and body cavity use, 2 OMNIPAQUE (iohexol) oral solution for oral use.</Description>
</NDC>
<NDC>
<NDCCode>0407-1412-20</NDCCode>
<PackageDescription>10 VIAL, GLASS in 1 BOX (0407-1412-20) / 20 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>00407-1412-20</NDC11Code>
<ProductNDC>0407-1412</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omnipaque</ProprietaryName>
<NonProprietaryName>Iohexol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRA-ARTICULAR; INTRATHECAL; INTRAVASCULAR; INTRAVENOUS; ORAL; RECTAL</RouteName>
<StartMarketingDate>19851226</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018956</ApplicationNumber>
<LabelerName>GE Healthcare Inc.</LabelerName>
<SubstanceName>IOHEXOL</SubstanceName>
<StrengthNumber>240</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19851226</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>OMNIPAQUE is a radiographic contrast agent indicated for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular, and body cavity imaging procedures in adults and pediatric patients. (1).</IndicationAndUsage>
<Description>Iohexol is a nonionic radiographic contrast agent available as: 1 OMNIPAQUE (iohexol) injection for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular, and body cavity use, 2 OMNIPAQUE (iohexol) oral solution for oral use.</Description>
</NDC>
<NDC>
<NDCCode>0407-1412-30</NDCCode>
<PackageDescription>10 BOTTLE, PLASTIC in 1 BOX (0407-1412-30) / 50 mL in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>00407-1412-30</NDC11Code>
<ProductNDC>0407-1412</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omnipaque</ProprietaryName>
<NonProprietaryName>Iohexol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRA-ARTICULAR; INTRATHECAL; INTRAVASCULAR; INTRAVENOUS; ORAL; RECTAL</RouteName>
<StartMarketingDate>19851226</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018956</ApplicationNumber>
<LabelerName>GE Healthcare Inc.</LabelerName>
<SubstanceName>IOHEXOL</SubstanceName>
<StrengthNumber>240</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19851226</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>OMNIPAQUE is a radiographic contrast agent indicated for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular, and body cavity imaging procedures in adults and pediatric patients. (1).</IndicationAndUsage>
<Description>Iohexol is a nonionic radiographic contrast agent available as: 1 OMNIPAQUE (iohexol) injection for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular, and body cavity use, 2 OMNIPAQUE (iohexol) oral solution for oral use.</Description>
</NDC>
<NDC>
<NDCCode>0407-1412-33</NDCCode>
<PackageDescription>10 BOTTLE, PLASTIC in 1 BOX (0407-1412-33) / 100 mL in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>00407-1412-33</NDC11Code>
<ProductNDC>0407-1412</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omnipaque</ProprietaryName>
<NonProprietaryName>Iohexol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRA-ARTICULAR; INTRATHECAL; INTRAVASCULAR; INTRAVENOUS; ORAL; RECTAL</RouteName>
<StartMarketingDate>19851226</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018956</ApplicationNumber>
<LabelerName>GE Healthcare Inc.</LabelerName>
<SubstanceName>IOHEXOL</SubstanceName>
<StrengthNumber>240</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19851226</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>OMNIPAQUE is a radiographic contrast agent indicated for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular, and body cavity imaging procedures in adults and pediatric patients. (1).</IndicationAndUsage>
<Description>Iohexol is a nonionic radiographic contrast agent available as: 1 OMNIPAQUE (iohexol) injection for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular, and body cavity use, 2 OMNIPAQUE (iohexol) oral solution for oral use.</Description>
</NDC>
<NDC>
<NDCCode>0407-1412-34</NDCCode>
<PackageDescription>10 BOTTLE, PLASTIC in 1 BOX (0407-1412-34) / 150 mL in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>00407-1412-34</NDC11Code>
<ProductNDC>0407-1412</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omnipaque</ProprietaryName>
<NonProprietaryName>Iohexol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRA-ARTICULAR; INTRATHECAL; INTRAVASCULAR; INTRAVENOUS; ORAL; RECTAL</RouteName>
<StartMarketingDate>19851226</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018956</ApplicationNumber>
<LabelerName>GE Healthcare Inc.</LabelerName>
<SubstanceName>IOHEXOL</SubstanceName>
<StrengthNumber>240</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19851226</StartMarketingDatePackage>
<EndMarketingDatePackage>20250304</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>OMNIPAQUE is a radiographic contrast agent indicated for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular, and body cavity imaging procedures in adults and pediatric patients. (1).</IndicationAndUsage>
<Description>Iohexol is a nonionic radiographic contrast agent available as: 1 OMNIPAQUE (iohexol) injection for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular, and body cavity use, 2 OMNIPAQUE (iohexol) oral solution for oral use.</Description>
</NDC>
<NDC>
<NDCCode>0407-1412-35</NDCCode>
<PackageDescription>10 BOTTLE, PLASTIC in 1 BOX (0407-1412-35) / 200 mL in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>00407-1412-35</NDC11Code>
<ProductNDC>0407-1412</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omnipaque</ProprietaryName>
<NonProprietaryName>Iohexol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRA-ARTICULAR; INTRATHECAL; INTRAVASCULAR; INTRAVENOUS; ORAL; RECTAL</RouteName>
<StartMarketingDate>19851226</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018956</ApplicationNumber>
<LabelerName>GE Healthcare Inc.</LabelerName>
<SubstanceName>IOHEXOL</SubstanceName>
<StrengthNumber>240</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-10-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19851226</StartMarketingDatePackage>
<EndMarketingDatePackage>20241024</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>OMNIPAQUE (iohexol) injection is a radiographic contrast agent indicated for intrathecal, intravascular, oral, rectal, intraarticular and body cavity use. OMNIPAQUE oral solution is indicated for oral use only in conjunction with OMNIPAQUE injection administered intravenously for computed tomography (CT) of the abdomen (1).</IndicationAndUsage>
<Description>OMNIPAQUE (iohexol) injection is a nonionic, x-ray or radiographic contrast medium for intrathecal, intravenous, oral, rectal and body cavity use. OMNIPAQUE oral solution is for oral use only. OMNIPAQUE injection and OMNIPAQUE oral solution are both provided as sterile, pyrogen-free and gluten-free solutions. OMNIPAQUE injection and OMNIPAQUE oral solution are colorless to pale yellow solutions. The chemical name of iohexol is Bis(2,3-dihydroxypropyl)-5-[N-(2,3-dihydroxypropyl)-acetamido]-2,4,6- triiodoisophthalamide with a molecular weight of 821.14 (iodine content 46.36%). Iohexol has the following structural formula. OMNIPAQUE injection is available in five strengths: : 1 OMNIPAQUE 140 mg iodine/mL (302 mg of iohexol/mL): Each mL contains 140 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 2 OMNIPAQUE 180 mg iodine/mL (388 mg of iohexol/mL): Each mL contains 180 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 3 OMNIPAQUE 240 mg iodine/mL (518 mg of iohexol/mL): Each mL contains 240 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 4 OMNIPAQUE 300 mg iodine/mL (647 mg of iohexol/mL): Each mL contains 300 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 5 OMNIPAQUE 350 mg iodine/mL (755 mg of iohexol/mL): Each mL contains 350 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium.</Description>
</NDC>
<NDC>
<NDCCode>0407-1412-38</NDCCode>
<PackageDescription>10 BOTTLE, PLASTIC in 1 BOX (0407-1412-38) / 50 mL in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>00407-1412-38</NDC11Code>
<ProductNDC>0407-1412</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omnipaque</ProprietaryName>
<NonProprietaryName>Iohexol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRATHECAL; INTRAVASCULAR; INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20050811</StartMarketingDate>
<EndMarketingDate>20241110</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018956</ApplicationNumber>
<LabelerName>GE Healthcare Inc.</LabelerName>
<SubstanceName>IOHEXOL</SubstanceName>
<StrengthNumber>240</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-11-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20050811</StartMarketingDatePackage>
<EndMarketingDatePackage>20241110</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>OMNIPAQUE (iohexol) injection is a radiographic contrast agent indicated for intrathecal, intravascular, oral, rectal, intraarticular and body cavity use. OMNIPAQUE oral solution is indicated for oral use only in conjunction with OMNIPAQUE injection administered intravenously for computed tomography (CT) of the abdomen ( 1).</IndicationAndUsage>
<Description>OMNIPAQUE (iohexol) injection is a nonionic, x-ray or radiographic contrast medium for intrathecal, intravenous, oral, rectal and body cavity use. OMNIPAQUE oral solution is for oral use only. OMNIPAQUE injection and OMNIPAQUE oral solution are both provided as sterile, pyrogen-free and gluten-free solutions. OMNIPAQUE injection and OMNIPAQUE oral solution are colorless to pale yellow solutions. The chemical name of iohexol is Bis(2,3-dihydroxypropyl)-5-[ N-(2,3-dihydroxypropyl)-acetamido]-2,4,6- triiodoisophthalamide with a molecular weight of 821.14 (iodine content 46.36%). Iohexol has the following structural formula:. OMNIPAQUE injection is available in five strengths: 1 OMNIPAQUE 140 mg iodine/mL (302 mg of iohexol/mL): Each mL contains 140 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 2 OMNIPAQUE 180 mg iodine/mL (388 mg of iohexol/mL): Each mL contains 180 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 3 OMNIPAQUE 240 mg iodine/mL (518 mg of iohexol/mL): Each mL contains 240 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 4 OMNIPAQUE 300 mg iodine/mL (647 mg of iohexol/mL): Each mL contains 300 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 5 OMNIPAQUE 350 mg iodine/mL (755 mg of iohexol/mL): Each mL contains 350 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium.</Description>
</NDC>
<NDC>
<NDCCode>22840-1412-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (22840-1412-1) </PackageDescription>
<NDC11Code>22840-1412-01</NDC11Code>
<ProductNDC>22840-1412</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>White Alder Pollen</ProprietaryName>
<NonProprietaryName>Alnus Rhombifolia</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>ALNUS RHOMBIFOLIA POLLEN</SubstanceName>
<StrengthNumber>.001</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.</IndicationAndUsage>
<Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
</NDC>
<NDC>
<NDCCode>50090-1412-0</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (50090-1412-0) </PackageDescription>
<NDC11Code>50090-1412-00</NDC11Code>
<ProductNDC>50090-1412</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130321</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202519</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>HYDROCHLOROTHIAZIDE; VALSARTAN</SubstanceName>
<StrengthNumber>12.5; 160</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141128</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the angiotensin II receptor blocker (ARB) class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality have also been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy Valsartan and hydrochlorothiazide tablets may be substituted for the titrated components. Initial Therapy Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320 mg/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of < 140 mmHg (systolic) and 60% likelihood of achieving < 90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on hydrochlorothiazide alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rise to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).</IndicationAndUsage>
<Description>Valsartan and hydrochlorothiazide is a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl)[1,1΄-biphenyl]-4-yl]methyl]-L-Valine. Its molecular formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan USP is a white, fine hygroscopic powder. It is soluble in ethanol and methanol and practically insoluble in water. Hydrochlorothiazide USP is a white or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its molecular formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is:Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium lauryl sulfate, talc, and titanium dioxide. In addition, the 80 mg/12.5 mg and 160 mg/12.5 mg contains iron oxide red and iron oxide yellow, the 160 mg/25 mg contains iron oxide black, iron oxide red, and iron oxide yellow, 320 mg/12.5 mg contains iron oxide black and iron oxide red, and the 320 mg/25 mg contains iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>50090-1412-1</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (50090-1412-1) </PackageDescription>
<NDC11Code>50090-1412-01</NDC11Code>
<ProductNDC>50090-1412</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130321</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202519</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>HYDROCHLOROTHIAZIDE; VALSARTAN</SubstanceName>
<StrengthNumber>12.5; 160</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141128</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the angiotensin II receptor blocker (ARB) class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality have also been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy Valsartan and hydrochlorothiazide tablets may be substituted for the titrated components. Initial Therapy Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320 mg/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of < 140 mmHg (systolic) and 60% likelihood of achieving < 90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on hydrochlorothiazide alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rise to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).</IndicationAndUsage>
<Description>Valsartan and hydrochlorothiazide is a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl)[1,1΄-biphenyl]-4-yl]methyl]-L-Valine. Its molecular formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan USP is a white, fine hygroscopic powder. It is soluble in ethanol and methanol and practically insoluble in water. Hydrochlorothiazide USP is a white or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its molecular formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is:Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium lauryl sulfate, talc, and titanium dioxide. In addition, the 80 mg/12.5 mg and 160 mg/12.5 mg contains iron oxide red and iron oxide yellow, the 160 mg/25 mg contains iron oxide black, iron oxide red, and iron oxide yellow, 320 mg/12.5 mg contains iron oxide black and iron oxide red, and the 320 mg/25 mg contains iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>51662-1412-1</NDCCode>
<PackageDescription>10 mL in 1 VIAL, SINGLE-DOSE (51662-1412-1) </PackageDescription>
<NDC11Code>51662-1412-01</NDC11Code>
<ProductNDC>51662-1412</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hci And Epinephrine With Epinephrine</ProprietaryName>
<NonProprietaryName>Lidocaine Hci And Epinephrine With Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20191014</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA006488</ApplicationNumber>
<LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
<SubstanceName>EPINEPHRINE BITARTRATE; LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
<StrengthNumber>.005; 20</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191014</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Xylocaine (lidocaine HCl) Injections are indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.</IndicationAndUsage>
<Description>Xylocaine (lidocaine HCl) Injections are sterile, nonpyrogenic, aqueous solutions that contain a local anesthetic agent with or without epinephrine and are administered parenterally by injection. See INDICATIONS & USAGE section for specific uses. Xylocaine solutions contain lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C 14H 22N 2O HCl) has the following structural formula. Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21. Epinephrine (C 9H 13NO 3) has the following structural formula. Dosage forms listed as Xylocaine-MPF indicate single dose solutions that are Methyl Paraben Free (MPF). Xylocaine MPF is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. Xylocaine in multiple dose vials: Each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Xylocaine MPF with Epinephrine is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer. Xylocaine with Epinephrine in multiple dose vials: Each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid. Filled under nitrogen.</Description>
</NDC>
<NDC>
<NDCCode>72162-1000-2</NDCCode>
<PackageDescription>120 CAPSULE in 1 BOTTLE (72162-1000-2) </PackageDescription>
<NDC11Code>72162-1000-02</NDC11Code>
<ProductNDC>72162-1000</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Icosapent Ethyl</ProprietaryName>
<NonProprietaryName>Icosapent Ethyl</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201104</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209457</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ICOSAPENT ETHYL</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Icosapent ethyl is indicated: 1 as an adjunct to diet to reduce triglyceride (TG) levels in adult patients with severe (≥500 mg/dL) hypertriglyceridemia. .</IndicationAndUsage>
<Description>Icosapent ethyl, a lipid-regulating agent, is supplied as a 0.5 gram and 1 gram, liquid-filled soft gelatin capsule for oral administration. Each icosapent ethyl capsule contains either 0.5 grams of icosapent ethyl or 1 gram of icosapent ethyl. Icosapent ethyl is an ethyl ester of the omega-3 fatty acid eicosapentaenoic acid (EPA). The empirical formula of icosapent ethyl is C22H34O2 and the molecular weight is 330.5. The chemical name for icosapent ethyl is ethyl all-cis-5,8,11,14,17-icosapentaenoate with the following chemical structure. Each capsule contains the following inactive ingredients: gelatin, glycerin, purified water, sorbitol, sorbitan and tocopherol. The monogramming ink ingredients contain: ammonium hydroxide, iron oxide black, isopropyl alcohol, macrogol, polyvinyl acetate phthalate, propylene glycol, purified water and SDA alcohol (ethanol and ethyl acetate).</Description>
</NDC>
<NDC>
<NDCCode>72162-1048-2</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (72162-1048-2) / 45 g in 1 TUBE</PackageDescription>
<NDC11Code>72162-1048-02</NDC11Code>
<ProductNDC>72162-1048</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Adapalene</ProprietaryName>
<NonProprietaryName>Adapalene</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20100630</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090824</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ADAPALENE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240223</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Adapalene cream is indicated for the topical treatment of acne vulgaris.</IndicationAndUsage>
<Description>Adapalene cream, 0.1%, contains adapalene 0.1% in an aqueous cream emulsion consisting of carbomer 934P, cyclomethicone, edetate disodium, glycerin, methyl glucose sesquistearate, methylparaben, PEG-20 methyl glucose sesquistearate, phenoxyethanol, propylparaben, purified water, squalane, and trolamine. The chemical name of adapalene is 6-[3-(1-adamantyl)-4-methoxyphenyl]-2-naphthoic acid. It is a white to off-white powder which is soluble in tetrahydrofuran, sparingly soluble in ethanol, and practically insoluble in water. The molecular formula is C28H28O3 and molecular weight is 412.52. Adapalene is represented by the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>72162-1059-2</NDCCode>
<PackageDescription>45 TABLET, EXTENDED RELEASE in 1 BOTTLE (72162-1059-2) </PackageDescription>
<NDC11Code>72162-1059-02</NDC11Code>
<ProductNDC>72162-1059</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alprazolam</ProprietaryName>
<ProprietaryNameSuffix>Extended Release</ProprietaryNameSuffix>
<NonProprietaryName>Alprazolam</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070312</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078056</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ALPRAZOLAM</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2023-05-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230508</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Alprazolam extended-release tablets, USP contain alprazolam, USP which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-α] [1,4] benzodiazepine. The molecular formula is C17H13ClN4 which corresponds to a molecular weight of 308.76. The structural formula is represented below. Alprazolam, USP is a white crystalline powder, which is soluble in methanol or ethanol but which has no appreciable solubility in water at physiological pH. Each alprazolam extended-release tablet USP, for oral administration, contains 0.5 mg, 1 mg, 2 mg, or 3 mg of alprazolam, USP. The inactive ingredients are lactose monohydrate, hypromellose, and magnesium stearate. In addition, the 1 mg tablets also contain D&C yellow #10 aluminum lake. The 2 mg tablets also contain FD&C Yellow #6 aluminum lake, and the 3 mg tablets also contain D&C Yellow #10 aluminum lake, and FD&C Blue #2 aluminum lake. Product meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>72162-1071-2</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (72162-1071-2) / 45 g in 1 TUBE</PackageDescription>
<NDC11Code>72162-1071-02</NDC11Code>
<ProductNDC>72162-1071</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tretinoin</ProprietaryName>
<NonProprietaryName>Tretinoin</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20190812</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA017955</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>TRETINOIN</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tretinoin is indicated for topical application in the treatment of acne vulgaris. The safety and efficacy of the long-term use of this product in the treatment of other disorders have not been established.</IndicationAndUsage>
<Description>Tretinoin Cream and Tretinoin Gel are used for the topical treatment of acne vulgaris. Tretinoin Gel contains tretinoin (retinoic acid, vitamin A acid) in either of two strengths, 0.025% or 0.01% by weight, in a gel vehicle of butylated hydroxytoluene, hydroxypropyl cellulose and alcohol (denatured with tert-butyl alcohol and brucine sulfate) 90% w/w. Tretinoin Cream contains tretinoin in one of three strengths, 0.1%, 0.05%, or 0.025% by weight, in a hydrophilic cream vehicle of stearic acid, isopropyl myristate, polyoxyl 40 stearate, stearyl alcohol, xanthan gum, sorbic acid, butylated hydroxytoluene, and purified water. Chemically, tretinoin is all-trans-retinoic acid and has the following structure:.</Description>
</NDC>
<NDC>
<NDCCode>72162-1072-2</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (72162-1072-2) / 45 g in 1 TUBE</PackageDescription>
<NDC11Code>72162-1072-02</NDC11Code>
<ProductNDC>72162-1072</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tretinoin</ProprietaryName>
<NonProprietaryName>Tretinoin</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20190712</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA017579</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>TRETINOIN</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tretinoin is indicated for topical application in the treatment of acne vulgaris. The safety and efficacy of the long-term use of this product in the treatment of other disorders have not been established.</IndicationAndUsage>
<Description>Tretinoin Cream and Tretinoin Gel are used for the topical treatment of acne vulgaris. Tretinoin Gel contains tretinoin (retinoic acid, vitamin A acid) in either of two strengths, 0.025% or 0.01% by weight, in a gel vehicle of butylated hydroxytoluene, hydroxypropyl cellulose and alcohol (denatured with tert-butyl alcohol and brucine sulfate) 90% w/w. Tretinoin Cream contains tretinoin in one of three strengths, 0.1%, 0.05%, or 0.025% by weight, in a hydrophilic cream vehicle of stearic acid, isopropyl myristate, polyoxyl 40 stearate, stearyl alcohol, xanthan gum, sorbic acid, butylated hydroxytoluene, and purified water. Chemically, tretinoin is all-trans-retinoic acid and has the following structure:.</Description>
</NDC>
<NDC>
<NDCCode>72162-1076-2</NDCCode>
<PackageDescription>90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (72162-1076-2) </PackageDescription>
<NDC11Code>72162-1076-02</NDC11Code>
<ProductNDC>72162-1076</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride</ProprietaryName>
<NonProprietaryName>Potassium Chloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208864</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240405</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium chloride extended-release capsules are indicated for the treatment and prophylaxis of hypokalemia in adults and children with or without metabolic alkalosis, in patients for whom dietary management with potassium-rich foods or diuretic dose reduction is insufficient.</IndicationAndUsage>
<Description>Potassium chloride extended-release capsules, USP, are an oral dosage form of microencapsulated potassium chloride containing 600 mg and 750 mg of potassium chloride, USP, equivalent to 8 mEq and 10 mEq of potassium, respectively. The chemical name of the active ingredient is potassium chloride and the structural formula is KCl. It has a molecular mass of 74.55. Potassium chloride, USP, occurs as a white granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Inactive ingredients: ethylcellulose, gelatin, magnesium stearate, sodium lauryl sulfate, titanium dioxide and edible black ink. The 10 mEq capsules also contain black iron oxide, FD&C blue No.1 and FD&C red No.3.</Description>
</NDC>
<NDC>
<NDCCode>72162-1085-2</NDCCode>
<PackageDescription>30 mL in 1 BOTTLE, PLASTIC (72162-1085-2) </PackageDescription>
<NDC11Code>72162-1085-02</NDC11Code>
<ProductNDC>72162-1085</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methadone Hydrocloride</ProprietaryName>
<ProprietaryNameSuffix>Dye-free, Sugar-free, Unflavored</ProprietaryNameSuffix>
<NonProprietaryName>Methadone Hydrochloride</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212093</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>METHADONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231005</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methadone Hydrochloride contains methadone, an opioid agonist indicated for the: 1 detoxification treatment of opioid addiction (heroin or other morphine-like drugs)., 2 maintenance treatment of opioid addiction (heroin or other morphine-like drugs), in conjunction with appropriate social and medical services.</IndicationAndUsage>
<Description>Methadone Hydrochloride Oral Concentrate, USP dye-free, sugar-free, unflavored contains methadone, an opioid agonist, and is available as a dye-free, sugar-free, unflavored liquid concentrate of methadone hydrochloride for oral administration. Methadone hydrochloride is chemically described as 6-(dimethylamino)-4,4-diphenyl-3-heptone hydrochloride. Methadone hydrochloride, USP is a fine white powder. It is very soluble in water, soluble in isopropanol and in chloroform, and practically insoluble in ether and in glycerine. It is present in Methadone Hydrochloride as the racemic mixture. Methadone hydrochloride has a melting point of 235°C, a pKa of 8.25 in water at 20°C, a solution (1 part per 100) pH between 4.5 and 6.5, a partition coefficient of 117 at pH 7.4 in octanol/water and a molecular weight of 345.91. Its structural formula is C21H27NOHCl. This liquid concentrate contains 10 mg of methadone hydrochloride (equivalent to 8.95 mg of methadone) per mL and the following inactive ingredients: citric acid anhydrous, purified water, sodium benzoate.</Description>
</NDC>
</NDCList>