{
"NDC": [
{
"NDCCode": "72162-1505-2",
"PackageDescription": "210 g in 1 CAN (72162-1505-2) ",
"NDC11Code": "72162-1505-02",
"ProductNDC": "72162-1505",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cholestyramine",
"NonProprietaryName": "Cholestyramine",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20050915",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077203",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "CHOLESTYRAMINE",
"StrengthNumber": "4",
"StrengthUnit": "g/5g",
"Pharm_Classes": "Bile Acid Sequestrant [EPC], Bile-acid Binding Activity [MoA]",
"Status": "Active",
"LastUpdate": "2024-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240315",
"SamplePackage": "N",
"IndicationAndUsage": "1) Cholestyramine for Oral Suspension USP is indicated as adjunctive therapy to diet for the reduction of elevated serum cholesterol in patients with primary hypercholesterolemia (elevated low density lipoprotein [LDL] cholesterol) who do not respond adequately to diet. Cholestyramine may be useful to lower LDL cholesterol in patients who also have hypertriglyceridemia, but it is not indicated where hypertriglyceridemia is the abnormality of most concern. Therapy with lipid-altering agents should be a component of multiple risk factor intervention in those individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Treatment should begin and continue with dietary therapy specific for the type of hyperlipoproteinemia determined prior to initiation of drug therapy. Excess body weight may be an important factor and caloric restriction for weight normalization should be addressed prior to drug therapy in the overweight. Prior to initiating therapy with Cholestyramine, secondary causes of hypercholesterolemia (e.g., poorly controlled diabetes mellitus, hypothyroidism, nephrotic syndrome, dysproteinemias, obstructive liver disease, other drug therapy, alcoholism), should be excluded, and a lipid profile performed to assess Total cholesterol, HDL-C, and triglycerides (TG). For individuals with TG less than 400 mg/dL (<4.5 mmol/L), LDL-C can be estimated using the following equation. LDL-C = Total cholesterol – [(TG/5) + HDL-C]. For TG levels >400 mg/dL, this equation is less accurate and LDL-C concentrations should be determined by ultracentrifugation. In hypertriglyceridemic patients, LDL-C may be low or normal despite elevated Total-C. In such cases Cholestyramine may not be indicated. Serum cholesterol and triglyceride levels should be determined periodically based on NCEP guidelines to confirm initial and adequate long-term response. A favorable trend in cholesterol reduction should occur during the first month of Cholestyramine therapy. The therapy should be continued to sustain cholesterol reduction. If adequate cholesterol reduction is not attained, increasing the dosage of Cholestyramine or adding other lipid-lowering agents in combination with Cholestyramine should be considered. Since the goal of treatment is to lower LDL-C, the NCEP 4 recommends that LDL-C levels be used to initiate and assess treatment response. If LDL-C levels are not available then Total-C alone may be used to monitor long-term therapy. A lipoprotein analysis (including LDL-C determination) should be carried out once a year. The NCEP treatment guidelines are summarized below. Cholestyramine monotherapy has been demonstrated to retard the rate of progression 2,3 and increase the rate of regression3 of coronary atherosclerosis. 2) Cholestyramine for oral suspension is indicated for the relief of pruritus associated with partial biliary obstruction. Cholestyramine for oral suspension has been shown to have a variable effect on serum cholesterol in these patients. Patients with primary biliary cirrhosis may exhibit an elevated cholesterol as part of their disease.",
"Description": "Cholestyramine for Oral Suspension USP, the chloride salt of a basic anion exchange resin, a cholesterol lowering agent, is intended for oral administration. Cholestyramine resin is quite hydrophilic, but insoluble in water. The cholestyramine resin in Cholestyramine is not absorbed from the digestive tract. Four grams of anhydrous cholestyramine resin is contained in 9 grams of Cholestyramine for Oral Suspension USP. Four grams of anhydrous cholestyramine resin is contained in 5 grams of Cholestyramine for Oral Suspension USP, Light. It is represented by the following structural formula. Cholestyramine for Oral Suspension USP contains the following inactive ingredients: acacia, citric acid, D&C Yellow No. 10, FD&C Yellow No. 6, flavor (natural and artificial Orange), polysorbate 80, propylene glycol alginate and sucrose. Cholestyramine for Oral Suspension USP, Light contains the following inactive ingredients: aspartame, citric acid, colloidal silicon dioxide, D&C Yellow No. 10, FD&C Red No. 40, flavor (natural and artificial Orange), maltodextrin, propylene glycol alginate and xanthan gum."
},
{
"NDCCode": "36987-1505-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (36987-1505-2)",
"NDC11Code": "36987-1505-02",
"ProductNDC": "36987-1505",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rhubarb",
"NonProprietaryName": "Rhubarb",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "RHUBARB",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Plant Allergenic Extract [EPC],Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Plant Proteins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "37662-1505-2",
"PackageDescription": "1200 PELLET in 1 BOTTLE, GLASS (37662-1505-2) ",
"NDC11Code": "37662-1505-02",
"ProductNDC": "37662-1505",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Linum Usitatissimum",
"NonProprietaryName": "Linum Usitatissimum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220913",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "FLAX SEED",
"StrengthNumber": "6",
"StrengthUnit": "[hp_C]/1",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Dietary Proteins [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Food Allergenic Extract [EPC], Non-Standardized Plant Allergenic Extract [EPC], Plant Proteins [CS], Seed Storage Proteins [CS]",
"Status": "Active",
"LastUpdate": "2022-09-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220913",
"SamplePackage": "N"
},
{
"NDCCode": "51552-1505-2",
"PackageDescription": "50 g in 1 CONTAINER (51552-1505-2)",
"NDC11Code": "51552-1505-02",
"ProductNDC": "51552-1505",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Lipopen Anhydrous",
"DosageFormName": "CREAM",
"StartMarketingDate": "20120101",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Fagron Inc",
"SubstanceName": "TITANIUM DIOXIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "51662-1505-3",
"PackageDescription": "25 POUCH in 1 CASE (51662-1505-3) / 1 VIAL, MULTI-DOSE in 1 POUCH (51662-1505-2) / 50 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "51662-1505-03",
"ProductNDC": "51662-1505",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hci And Epinephrine",
"NonProprietaryName": "Lidocaine Hci And Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; PERINEURAL",
"StartMarketingDate": "20200311",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA006488",
"LabelerName": "HF Acquisition Co LLC, DBA HealthFirst",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE ANHYDROUS; EPINEPHRINE BITARTRATE",
"StrengthNumber": "20; .01",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-02-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220317",
"SamplePackage": "N",
"IndicationAndUsage": "Xylocaine (lidocaine HCl) Injections are indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.",
"Description": "Xylocaine (lidocaine HCl) Injections are sterile, nonpyrogenic, aqueous solutions that contain a local anesthetic agent with or without epinephrine and are administered parenterally by injection. See INDICATIONS AND USAGE uses. Xylocaine solutions contain lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C 14H 22N 2O HCl) has the following structural formula. Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21. Epinephrine (C 9H 13NO 3) has the following structural formula. Dosage forms listed as Xylocaine-MPF indicate single dose solutions that are Methyl Paraben Free (MPF). Xylocaine MPF is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. Xylocaine in multiple dose vials: Each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Xylocaine MPF with Epinephrine is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer. Xylocaine with Epinephrine in multiple dose vials: Each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid. Filled under nitrogen."
},
{
"NDCCode": "55714-1505-2",
"PackageDescription": "59.14 mL in 1 BOTTLE, GLASS (55714-1505-2)",
"NDC11Code": "55714-1505-02",
"ProductNDC": "55714-1505",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Constipation",
"NonProprietaryName": "Abies Nig., Aesculus Hipp., Aloe, Alumina, Bryonia, Carbo Veg., Chelidonium Majus, Collinsonia, Graphites, Hydrastis, Kali Carb., Lycopodium, Mag. Mur., Mezereum, Nux Vom., Podoph. Pelt., Rhamnus Purshiana, Sanicula, Selenium, Sepia, Silicea, Tabacum, Veratrum Alb., Zinc. Met., Echinacea, Iris Versicolor, Phytolacca, Taraxacum",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20110301",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Newton Laboratories, Inc.",
"SubstanceName": "PICEA MARIANA RESIN; HORSE CHESTNUT; ALOE; ALUMINUM OXIDE; BRYONIA ALBA ROOT; ACTIVATED CHARCOAL; CHELIDONIUM MAJUS; COLLINSONIA CANADENSIS ROOT; GRAPHITE; GOLDENSEAL; POTASSIUM CARBONATE; LYCOPODIUM CLAVATUM SPORE; MAGNESIUM CHLORIDE; DAPHNE MEZEREUM BARK; STRYCHNOS NUX-VOMICA SEED; PODOPHYLLUM; FRANGULA PURSHIANA BARK; SANICULA EUROPAEA LEAF; SELENIUM; SEPIA OFFICINALIS JUICE; SILICON DIOXIDE; TOBACCO LEAF; VERATRUM ALBUM ROOT; ZINC; ECHINACEA, UNSPECIFIED; IRIS VERSICOLOR ROOT; PHYTOLACCA AMERICANA ROOT; TARAXACUM OFFICINALE",
"StrengthNumber": "15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 3; 3; 3; 3",
"StrengthUnit": "[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Constipation Formulated for associated symptoms such as difficult elimination, hard stools, pain, tenderness, pressure and irritability."
},
{
"NDCCode": "69238-1505-2",
"PackageDescription": "4 POUCH in 1 CARTON (69238-1505-2) / 1 PATCH in 1 POUCH / 168 h in 1 PATCH",
"NDC11Code": "69238-1505-02",
"ProductNDC": "69238-1505",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buprenorphine",
"NonProprietaryName": "Buprenorphine",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20200420",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211586",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "BUPRENORPHINE",
"StrengthNumber": "7.5",
"StrengthUnit": "ug/h",
"Pharm_Classes": "Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200420",
"SamplePackage": "N",
"IndicationAndUsage": "Buprenorphine transdermal system is indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including buprenorphine transdermal system, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.",
"Description": "Buprenorphine transdermal system is a transdermal system providing systemic delivery of buprenorphine, a mu opioid partial agonist analgesic, continuously for 7 days. The chemical name of buprenorphine is 6,14- ethenomorphinan-7-methanol, 17-(cyclopropylmethyl)- α-(1,1-dimethylethyl)-4, 5-epoxy-18, 19-dihydro-3-hydroxy-6-methoxy-α-methyl-, [5α, 7α, (S)]. The structural formula is. The molecular weight of buprenorphine is 467.6; the empirical formula is C29H41NO4. Buprenorphine occurs as a white or almost white powder and is very slightly soluble in water, freely soluble in acetone, soluble in methanol and ether, and slightly soluble in cyclohexane. The pKa is 8.5 and the melting point is about 217°C. System Components and Structure. Five different strengths of buprenorphine transdermal system are available: 5, 7.5, 10, 15, and 20 mcg/hour (Table 6). The proportion of buprenorphine mixed in the adhesive matrix is the same in each of the five strengths. The amount of buprenorphine released from each system per hour is proportional to the active surface area of the system. The skin is the limiting barrier to diffusion from the system into the bloodstream. Table 6: Buprenorphine Transdermal System Product Specifications. Buprenorphine transdermal system is a rectangular or square, beige-colored system consisting of a protective liner and functional layers. Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a beige-colored web backing layer; (2) an adhesive rim without buprenorphine; (3) a separating layer over the buprenorphine-containing adhesive matrix; (4) the buprenorphine-containing adhesive matrix; and (5) a peel-off release liner. Before use, the release liner covering the adhesive layer is removed and discarded. Figure 1: Cross-Section Diagram of Buprenorphine Transdermal System (not to scale). The active ingredient in buprenorphine transdermal system is buprenorphine. The inactive ingredients in each system are: acrylic adhesive, levulinic acid, oleyl oleate, and povidone."
},
{
"NDCCode": "70274-1505-2",
"PackageDescription": "118 mL in 1 BOTTLE (70274-1505-2)",
"NDC11Code": "70274-1505-02",
"ProductNDC": "70274-1505",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Mhs Pain Relief Oil",
"NonProprietaryName": "Camphor Oil",
"DosageFormName": "OIL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20151227",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part348",
"LabelerName": "Modern Herb Shop Inc.",
"SubstanceName": "CAMPHOR (NATURAL)",
"StrengthNumber": "6",
"StrengthUnit": "g/4576mL",
"Status": "Deprecated",
"LastUpdate": "2017-05-31"
},
{
"NDCCode": "71335-1505-2",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (71335-1505-2) ",
"NDC11Code": "71335-1505-02",
"ProductNDC": "71335-1505",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190719",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210432",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2024-05-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220920",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsules are indicated for: : 1 Management of neuropathic pain associated with diabetic peripheral neuropathy, 2 Management of postherpetic neuralgia, 3 Adjunctive therapy for the treatment of partial-onset seizures in patients 1 month of age and older, 4 Management of fibromyalgia, 5 Management of neuropathic pain associated with spinal cord injury.",
"Description": "Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin is a white or almost white powder with a pKa1 of 4.4 and a pKa2 of 10.1. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (Octanol : Water) is – 1.0. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with pregelatinized starch and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the orange & red capsule shells contain red iron oxide. The imprinting ink contains shellac, black iron oxide, propylene glycol, and potassium hydroxide."
},
{
"NDCCode": "73637-1505-3",
"PackageDescription": "1500 PACKET in 1 BAG (73637-1505-3) / 80 PELLET in 1 PACKET (73637-1505-2) ",
"NDC11Code": "73637-1505-03",
"ProductNDC": "73637-1505",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"NonProprietaryName": "Sofosbuvir",
"DosageFormName": "PELLET",
"StartMarketingDate": "20190828",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "IversLee AG",
"SubstanceName": "SOFOSBUVIR",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "28-AUG-19"
},
{
"NDCCode": "22840-1505-1",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (22840-1505-1) ",
"NDC11Code": "22840-1505-01",
"ProductNDC": "22840-1505",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Sunflower",
"NonProprietaryName": "Helianthus Annuus",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "HELIANTHUS ANNUUS POLLEN",
"StrengthNumber": "1000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies. .",
"Description": "Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter."
},
{
"NDCCode": "51662-1505-1",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (51662-1505-1) ",
"NDC11Code": "51662-1505-01",
"ProductNDC": "51662-1505",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hci And Epinephrine",
"NonProprietaryName": "Lidocaine Hci And Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; PERINEURAL",
"StartMarketingDate": "20200311",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA006488",
"LabelerName": "HF Acquisition Co LLC, DBA HealthFirst",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE ANHYDROUS; EPINEPHRINE BITARTRATE",
"StrengthNumber": "20; .01",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-02-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200311",
"SamplePackage": "N",
"IndicationAndUsage": "Xylocaine (lidocaine HCl) Injections are indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.",
"Description": "Xylocaine (lidocaine HCl) Injections are sterile, nonpyrogenic, aqueous solutions that contain a local anesthetic agent with or without epinephrine and are administered parenterally by injection. See INDICATIONS AND USAGE uses. Xylocaine solutions contain lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C 14H 22N 2O HCl) has the following structural formula. Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21. Epinephrine (C 9H 13NO 3) has the following structural formula. Dosage forms listed as Xylocaine-MPF indicate single dose solutions that are Methyl Paraben Free (MPF). Xylocaine MPF is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. Xylocaine in multiple dose vials: Each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Xylocaine MPF with Epinephrine is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer. Xylocaine with Epinephrine in multiple dose vials: Each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid. Filled under nitrogen."
},
{
"NDCCode": "53002-1505-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (53002-1505-3) ",
"NDC11Code": "53002-1505-03",
"ProductNDC": "53002-1505",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine",
"NonProprietaryName": "Olanzapine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120423",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090798",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "OLANZAPINE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20181001",
"SamplePackage": "N",
"IndicationAndUsage": "Olanzapine tablets are an atypical antipsychotic indicated. As oral formulation for the: 1 Treatment of schizophrenia. (1.1)Adults: Efficacy was established in three clinical trials in patients with schizophrenia: two 6-week trials and one maintenance trial. (14.1) Adolescents (ages 13 to 17): Efficacy was established in one 6- week trial in patients with schizophrenia (14.1). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.1), 2 Acute treatment of manic or mixed episodes associated with bipolar I disorder and maintenance treatment of bipolar I disorder. (1.2)Adults: Efficacy was established in three clinical trials in patients with manic or mixed episodes of bipolar I disorder: two 3- to 4-week trials and one maintenance trial. (14.2) Adolescents (ages 13 to 17): Efficacy was established in one 3- week trial in patients with manic or mixed episodes associated with bipolar I disorder (14.2). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.2), 3 Medication therapy for pediatric patients with schizophrenia or bipolar I disorder should be undertaken only after a thorough diagnostic evaluation and with careful consideration of the potential risks. (1.3), 4 Adjunct to valproate or lithium in the treatment of manic or mixed episodes associated with bipolar I disorder. (1.2)Efficacy was established in two 6-week clinical trials in adults (14.2). Maintenance efficacy has not been systematically evaluated. .",
"Description": "Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.43. The chemical structure is:. Olanzapine is a yellow powder. Olanzapine tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 mcmol), 5 mg (16 mcmol), 7.5 mg (24 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol), or 20 mg (64 mcmol). Inactive ingredients are lactose, magnesium stearate, microcrystalline cellulose, starch. The color coating contains FD&C blue No.2 aluminum lake (15 mg), ferric oxide red (20 mg), hydroxypropyl cellulose, hypromellose, iron oxide yellow (20 mg), polyethylene glycol and titanium dioxide (all strengths)."
},
{
"NDCCode": "72162-1000-2",
"PackageDescription": "120 CAPSULE in 1 BOTTLE (72162-1000-2) ",
"NDC11Code": "72162-1000-02",
"ProductNDC": "72162-1000",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Icosapent Ethyl",
"NonProprietaryName": "Icosapent Ethyl",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20201104",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209457",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ICOSAPENT ETHYL",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Status": "Active",
"LastUpdate": "2026-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241224",
"SamplePackage": "N",
"IndicationAndUsage": "Icosapent ethyl is indicated: 1 as an adjunct to diet to reduce triglyceride (TG) levels in adult patients with severe (≥500 mg/dL) hypertriglyceridemia. .",
"Description": "Icosapent ethyl, a lipid-regulating agent, is supplied as a 0.5 gram and 1 gram, liquid-filled soft gelatin capsule for oral administration. Each icosapent ethyl capsule contains either 0.5 grams of icosapent ethyl or 1 gram of icosapent ethyl. Icosapent ethyl is an ethyl ester of the omega-3 fatty acid eicosapentaenoic acid (EPA). The empirical formula of icosapent ethyl is C22H34O2 and the molecular weight is 330.5. The chemical name for icosapent ethyl is ethyl all-cis-5,8,11,14,17-icosapentaenoate with the following chemical structure. Each capsule contains the following inactive ingredients: gelatin, glycerin, purified water, sorbitol, sorbitan and tocopherol. The monogramming ink ingredients contain: ammonium hydroxide, iron oxide black, isopropyl alcohol, macrogol, polyvinyl acetate phthalate, propylene glycol, purified water and SDA alcohol (ethanol and ethyl acetate)."
},
{
"NDCCode": "72162-1048-2",
"PackageDescription": "1 TUBE in 1 CARTON (72162-1048-2) / 45 g in 1 TUBE",
"NDC11Code": "72162-1048-02",
"ProductNDC": "72162-1048",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Adapalene",
"NonProprietaryName": "Adapalene",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20100630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090824",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ADAPALENE",
"StrengthNumber": "1",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Active",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240223",
"SamplePackage": "N",
"IndicationAndUsage": "Adapalene cream is indicated for the topical treatment of acne vulgaris.",
"Description": "Adapalene cream, 0.1%, contains adapalene 0.1% in an aqueous cream emulsion consisting of carbomer 934P, cyclomethicone, edetate disodium, glycerin, methyl glucose sesquistearate, methylparaben, PEG-20 methyl glucose sesquistearate, phenoxyethanol, propylparaben, purified water, squalane, and trolamine. The chemical name of adapalene is 6-[3-(1-adamantyl)-4-methoxyphenyl]-2-naphthoic acid. It is a white to off-white powder which is soluble in tetrahydrofuran, sparingly soluble in ethanol, and practically insoluble in water. The molecular formula is C28H28O3 and molecular weight is 412.52. Adapalene is represented by the following structural formula:."
},
{
"NDCCode": "72162-1059-2",
"PackageDescription": "45 TABLET, EXTENDED RELEASE in 1 BOTTLE (72162-1059-2) ",
"NDC11Code": "72162-1059-02",
"ProductNDC": "72162-1059",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alprazolam",
"ProprietaryNameSuffix": "Extended Release",
"NonProprietaryName": "Alprazolam",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20070312",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078056",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ALPRAZOLAM",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2023-05-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230508",
"SamplePackage": "N",
"Description": "Alprazolam extended-release tablets, USP contain alprazolam, USP which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-α] [1,4] benzodiazepine. The molecular formula is C17H13ClN4 which corresponds to a molecular weight of 308.76. The structural formula is represented below. Alprazolam, USP is a white crystalline powder, which is soluble in methanol or ethanol but which has no appreciable solubility in water at physiological pH. Each alprazolam extended-release tablet USP, for oral administration, contains 0.5 mg, 1 mg, 2 mg, or 3 mg of alprazolam, USP. The inactive ingredients are lactose monohydrate, hypromellose, and magnesium stearate. In addition, the 1 mg tablets also contain D&C yellow #10 aluminum lake. The 2 mg tablets also contain FD&C Yellow #6 aluminum lake, and the 3 mg tablets also contain D&C Yellow #10 aluminum lake, and FD&C Blue #2 aluminum lake. Product meets USP Dissolution Test 2."
},
{
"NDCCode": "72162-1071-2",
"PackageDescription": "1 TUBE in 1 CARTON (72162-1071-2) / 45 g in 1 TUBE",
"NDC11Code": "72162-1071-02",
"ProductNDC": "72162-1071",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tretinoin",
"NonProprietaryName": "Tretinoin",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20190812",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA017955",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "TRETINOIN",
"StrengthNumber": ".1",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241224",
"SamplePackage": "N",
"IndicationAndUsage": "Tretinoin is indicated for topical application in the treatment of acne vulgaris. The safety and efficacy of the long-term use of this product in the treatment of other disorders have not been established.",
"Description": "Tretinoin Cream and Tretinoin Gel are used for the topical treatment of acne vulgaris. Tretinoin Gel contains tretinoin (retinoic acid, vitamin A acid) in either of two strengths, 0.025% or 0.01% by weight, in a gel vehicle of butylated hydroxytoluene, hydroxypropyl cellulose and alcohol (denatured with tert-butyl alcohol and brucine sulfate) 90% w/w. Tretinoin Cream contains tretinoin in one of three strengths, 0.1%, 0.05%, or 0.025% by weight, in a hydrophilic cream vehicle of stearic acid, isopropyl myristate, polyoxyl 40 stearate, stearyl alcohol, xanthan gum, sorbic acid, butylated hydroxytoluene, and purified water. Chemically, tretinoin is all-trans-retinoic acid and has the following structure:."
},
{
"NDCCode": "72162-1072-2",
"PackageDescription": "1 TUBE in 1 CARTON (72162-1072-2) / 45 g in 1 TUBE",
"NDC11Code": "72162-1072-02",
"ProductNDC": "72162-1072",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tretinoin",
"NonProprietaryName": "Tretinoin",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20190712",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA017579",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "TRETINOIN",
"StrengthNumber": ".25",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241224",
"SamplePackage": "N",
"IndicationAndUsage": "Tretinoin is indicated for topical application in the treatment of acne vulgaris. The safety and efficacy of the long-term use of this product in the treatment of other disorders have not been established.",
"Description": "Tretinoin Cream and Tretinoin Gel are used for the topical treatment of acne vulgaris. Tretinoin Gel contains tretinoin (retinoic acid, vitamin A acid) in either of two strengths, 0.025% or 0.01% by weight, in a gel vehicle of butylated hydroxytoluene, hydroxypropyl cellulose and alcohol (denatured with tert-butyl alcohol and brucine sulfate) 90% w/w. Tretinoin Cream contains tretinoin in one of three strengths, 0.1%, 0.05%, or 0.025% by weight, in a hydrophilic cream vehicle of stearic acid, isopropyl myristate, polyoxyl 40 stearate, stearyl alcohol, xanthan gum, sorbic acid, butylated hydroxytoluene, and purified water. Chemically, tretinoin is all-trans-retinoic acid and has the following structure:."
},
{
"NDCCode": "72162-1076-2",
"PackageDescription": "90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (72162-1076-2) ",
"NDC11Code": "72162-1076-02",
"ProductNDC": "72162-1076",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride",
"NonProprietaryName": "Potassium Chloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20200102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208864",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2024-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240405",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium chloride extended-release capsules are indicated for the treatment and prophylaxis of hypokalemia in adults and children with or without metabolic alkalosis, in patients for whom dietary management with potassium-rich foods or diuretic dose reduction is insufficient.",
"Description": "Potassium chloride extended-release capsules, USP, are an oral dosage form of microencapsulated potassium chloride containing 600 mg and 750 mg of potassium chloride, USP, equivalent to 8 mEq and 10 mEq of potassium, respectively. The chemical name of the active ingredient is potassium chloride and the structural formula is KCl. It has a molecular mass of 74.55. Potassium chloride, USP, occurs as a white granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Inactive ingredients: ethylcellulose, gelatin, magnesium stearate, sodium lauryl sulfate, titanium dioxide and edible black ink. The 10 mEq capsules also contain black iron oxide, FD&C blue No.1 and FD&C red No.3."
},
{
"NDCCode": "72162-1085-2",
"PackageDescription": "30 mL in 1 BOTTLE, PLASTIC (72162-1085-2) ",
"NDC11Code": "72162-1085-02",
"ProductNDC": "72162-1085",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methadone Hydrocloride",
"ProprietaryNameSuffix": "Dye-free, Sugar-free, Unflavored",
"NonProprietaryName": "Methadone Hydrochloride",
"DosageFormName": "CONCENTRATE",
"RouteName": "ORAL",
"StartMarketingDate": "20201102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212093",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "METHADONE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231005",
"SamplePackage": "N",
"IndicationAndUsage": "Methadone Hydrochloride contains methadone, an opioid agonist indicated for the: 1 detoxification treatment of opioid addiction (heroin or other morphine-like drugs)., 2 maintenance treatment of opioid addiction (heroin or other morphine-like drugs), in conjunction with appropriate social and medical services.",
"Description": "Methadone Hydrochloride Oral Concentrate, USP dye-free, sugar-free, unflavored contains methadone, an opioid agonist, and is available as a dye-free, sugar-free, unflavored liquid concentrate of methadone hydrochloride for oral administration. Methadone hydrochloride is chemically described as 6-(dimethylamino)-4,4-diphenyl-3-heptone hydrochloride. Methadone hydrochloride, USP is a fine white powder. It is very soluble in water, soluble in isopropanol and in chloroform, and practically insoluble in ether and in glycerine. It is present in Methadone Hydrochloride as the racemic mixture. Methadone hydrochloride has a melting point of 235°C, a pKa of 8.25 in water at 20°C, a solution (1 part per 100) pH between 4.5 and 6.5, a partition coefficient of 117 at pH 7.4 in octanol/water and a molecular weight of 345.91. Its structural formula is C21H27NOHCl. This liquid concentrate contains 10 mg of methadone hydrochloride (equivalent to 8.95 mg of methadone) per mL and the following inactive ingredients: citric acid anhydrous, purified water, sodium benzoate."
},
{
"NDCCode": "72162-1098-2",
"PackageDescription": "1 BOTTLE in 1 CARTON (72162-1098-2) / 50 mL in 1 BOTTLE",
"NDC11Code": "72162-1098-02",
"ProductNDC": "72162-1098",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20070227",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040710",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE ANHYDROUS",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-05-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230926",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine Hydrochloride Topical Solution USP, 4% is indicated for the production of topical anesthesia of accessible mucous membranes of the oral and nasal cavities and proximal portions of the digestive tract.",
"Description": "Lidocaine Hydrochloride Topical Solution USP, 4% contains a local anesthetic agent and is administered topically. See INDICATIONS for specific uses. Lidocaine Hydrochloride Topical Solution USP, 4% contains lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the following structural formula. The 50 mL screw-cap bottle should not be autoclaved, because the closure employed cannot withstand autoclaving temperatures and pressures. Composition of Lidocaine Hydrochloride Topical Solution USP, 4%: Each mL contains lidocaine HCl, 40 mg, methylparaben, and sodium hydroxide and/or hydrochloric acid to adjust pH to 5.0 to 7.0. An aqueous solution. NOT FOR INJECTION."
},
{
"NDCCode": "72162-1108-2",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (72162-1108-2) ",
"NDC11Code": "72162-1108-02",
"ProductNDC": "72162-1108",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Trospium Chloride",
"NonProprietaryName": "Trospium Chloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20101117",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091573",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "TROSPIUM CHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231009",
"SamplePackage": "N",
"IndicationAndUsage": "Trospium Chloride Tablets are a muscarinic antagonist indicated for the treatment of overactive bladder (OAB) with symptoms of urge urinary incontinence, urgency, and urinary frequency.",
"Description": "Trospium chloride is a quaternary ammonium compound with the chemical name of Spiro[8-azoniabicyclo[3.2.1]octane-8,1'-pyrrolidinium], 3-[(hydroxydiphenylacetyl)oxy]-, chloride, (1α, 3β, 5α). The empirical formula of trospium chloride is C25H30ClNO3 and its molecular weight is 427.97. The structural formula of trospium chloride is represented below. Trospium chloride is a fine, colorless to slightly yellow, crystalline solid. The compound's solubility in water is approximately 1 g per 2 mL. Each Trospium Chloride Tablet contains 20 mg of trospium chloride, a muscarinic antagonist, for oral administration. Each tablet also contains the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, calcium carbonate, croscarmellose sodium, povidone, hypromellose, talc, stearic acid, titanium dioxide, colloidal silicon dioxide, magnesium stearate and polyethylene glycol 3350."
},
{
"NDCCode": "72162-1109-2",
"PackageDescription": "1 BOTTLE, GLASS in 1 CARTON (72162-1109-2) / 118 mL in 1 BOTTLE, GLASS",
"NDC11Code": "72162-1109-02",
"ProductNDC": "72162-1109",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Midazolam Hydrochloride",
"NonProprietaryName": "Midazolam Hydrochloride",
"DosageFormName": "SYRUP",
"RouteName": "ORAL",
"StartMarketingDate": "20050502",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076379",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "MIDAZOLAM HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2023-10-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231025",
"SamplePackage": "N",
"IndicationAndUsage": "Midazolam HCl syrup is indicated for use in pediatric patients for sedation, anxiolysis and amnesia prior to diagnostic, therapeutic or endoscopic procedures or before induction of anesthesia. Midazolam HCl syrup is intended for use in monitored settings only and not for chronic or home use [see WARNINGS].",
"Description": "Midazolam is a benzodiazepine available as midazolam HCl syrup for oral administration. Midazolam, a white to light yellow crystalline compound, is insoluble in water, but can be solubilized in aqueous solutions by formation of the hydrochloride salt in situ under acidic conditions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the molecular formula C18H13ClFN3·HCl, a calculated molecular weight of 362.25 and the following structural formula. Each mL of the syrup contains midazolam hydrochloride equivalent to 2 mg midazolam compounded with artificial bitterness modifier, citric acid anhydrous, D&C Red #33, edetate disodium, glycerin, mixed fruit flavor, sodium benzoate, sodium citrate, sorbitol, and water; the pH is adjusted to 2.8 to 3.6 with hydrochloric acid. Under the acidic conditions required to solubilize midazolam in the syrup, midazolam is present as an equilibrium mixture (shown below) of the closed ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the syrup, the solution may contain up to about 40% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart below plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 2.8 to 3.6. Above pH 5, at least 99% of the mixture is present in the closed-ring form."
},
{
"NDCCode": "72162-1117-2",
"PackageDescription": "1 BOTTLE, WITH APPLICATOR in 1 CARTON (72162-1117-2) / 15 mL in 1 BOTTLE, WITH APPLICATOR",
"NDC11Code": "72162-1117-02",
"ProductNDC": "72162-1117",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Podocon 25",
"NonProprietaryName": "Podophyllum Resin",
"DosageFormName": "TINCTURE",
"RouteName": "TOPICAL",
"StartMarketingDate": "19900901",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "PODOPHYLLUM RESIN",
"StrengthNumber": "1",
"StrengthUnit": "mg/4mL",
"Status": "Active",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241224",
"SamplePackage": "N",
"IndicationAndUsage": "Podocon-25® (25% podophyllin in benzoin tincture) is indicated for the removal of soft genital (venereal) warts (condylomata acuminata)(4).",
"Description": "Podocon-25® is composed of Podophyllin (Podophyllum Resin, American) 25% in Benzoin Tincture. Podophyllum Resin is the powdered mixture of resins removed from the May apple or Mandrake (Podophyllum peltatum Linne’), a perennial plant of northern and middle United States(1). The podophyllin resin used in this product is exclusively the American podophyllin (rather than the Indian resin). American podophyllin typically has a reduced level of podophyllotoxin (see below)."
},
{
"NDCCode": "72162-1119-2",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (72162-1119-2) / 1 mL in 1 VIAL, GLASS",
"NDC11Code": "72162-1119-02",
"ProductNDC": "72162-1119",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Testosterone Cypionate",
"NonProprietaryName": "Testosterone Cypionate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20140501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091244",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "TESTOSTERONE CYPIONATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Androgen Receptor Agonists [MoA], Androgen [EPC], Androstanes [CS]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-07-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250402",
"SamplePackage": "N",
"IndicationAndUsage": "Testosterone Cypionate Injection, USP is indicated for replacement therapy in the male in conditions associated with symptoms of deficiency, or absence of endogenous testosterone. : 1 1.Primary hypogonadism (congenital or acquired): testicular failure due to cryptorchidism, bilateral torsion, orchitis, vanishing testis syndrome; or orchidectomy., 2 2.Hypogonadotropic hypogonadism (congenital or acquired): gonadotropin or luteinizing hormone-releasing hormone (LHRH) deficiency, or pituitary-hypothalamic injury from tumors, trauma, or radiation.",
"Description": "Testosterone Cypionate Injection, USP for intramuscular injection, contains Testosterone Cypionate, USP which is the oil-soluble 17 (beta)-cyclopentylpropionate ester of the androgenic hormone testosterone. Testosterone Cypionate, USP is a white or creamy white crystalline powder, odorless or nearly so and stable in air. It is insoluble in water, freely soluble in alcohol, chloroform, dioxane, ether, and soluble in vegetable oils. The chemical name for Testosterone Cypionate, USP is androst-4-en-3-one,17-(3-cyclopentyl-1- oxopropoxy)-, (17ß)-. Its molecular formula is C27H40O3, and the molecular weight 412.61. The structural formula is represented below. Testosterone Cypionate Injection, USP is available in one strength, 200 mg/mL Testosterone Cypionate, USP. Each mL of the 200 mg/mL solution contains: 1 Testosterone Cypionate, USP 200 mg, 2 Benzyl Benzoate, USP 0.2 mL, 3 Cottonseed Oil, USP 560 mg, 4 Benzyl Alcohol, USP (as preservative) 9.45 mg."
},
{
"NDCCode": "72162-1123-2",
"PackageDescription": "118 mL in 1 BOTTLE, PLASTIC (72162-1123-2) ",
"NDC11Code": "72162-1123-02",
"ProductNDC": "72162-1123",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Brompheniramine Maleate, Pseudoephedrine Hydrochloride And Dextromethorphan Hydrobromide",
"NonProprietaryName": "Brompheniramine Maleate, Pseudoephedrine Hydrochloride And Dextromethorphan Hydrobromide",
"DosageFormName": "SYRUP",
"RouteName": "ORAL",
"StartMarketingDate": "20150206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205292",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "BROMPHENIRAMINE MALEATE; PSEUDOEPHEDRINE HYDROCHLORIDE; DEXTROMETHORPHAN HYDROBROMIDE",
"StrengthNumber": "2; 30; 10",
"StrengthUnit": "mg/5mL; mg/5mL; mg/5mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA], alpha-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230816",
"SamplePackage": "N",
"IndicationAndUsage": "For relief of coughs and upper respiratory symptoms, including nasal congestion, associated with allergy or the common cold.",
"Description": "Brompheniramine Maleate, Pseudoephedrine Hydrochloride and Dextromethorphan Hydrobromide Syrup is a clear, light pink syrup with a butterscotch flavor. Each 5 mL (1 teaspoonful) contains. Brompheniramine Maleate, USP ................. 2 mg. Pseudoephedrine Hydrochloride, USP ........ 30 mg. Dextromethorphan Hydrobromide, USP ...... 10 mg. Alcohol 0.95% v/v. In a palatable, aromatic vehicle. Inactive Ingredients: alcohol, artificial butterscotch flavor, citric acid anhydrous, glycerin, methylparaben, propylene glycol, purified water, sodium benzoate, sodium citrate, sucrose, and FD&C Red No. 40. It may contain 10% citric acid solution or 10% sodium citrate solution for pH adjustment. The pH range is between 3.0 and 6.0. Antihistamine/Nasal Decongestant/Antitussive syrup for oral administration."
},
{
"NDCCode": "72162-1124-2",
"PackageDescription": "15 g in 1 BOTTLE, PLASTIC (72162-1124-2) ",
"NDC11Code": "72162-1124-02",
"ProductNDC": "72162-1124",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nystop",
"NonProprietaryName": "Nystatin",
"DosageFormName": "POWDER",
"RouteName": "TOPICAL",
"StartMarketingDate": "19960816",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA064118",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "NYSTATIN",
"StrengthNumber": "100000",
"StrengthUnit": "[USP'U]/g",
"Pharm_Classes": "Polyene Antifungal [EPC], Polyenes [CS]",
"Status": "Active",
"LastUpdate": "2026-07-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241224",
"SamplePackage": "N",
"IndicationAndUsage": "Nystatin Topical Powder is indicated in the treatment of cutaneous or mucocutaneous mycotic infections caused by Candida albicans and other susceptible Candida species. This preparation is not indicated for systemic, oral, intravaginal or ophthalmic use.",
"Description": "Nystatin is a polyene antifungal antibiotic obtained from Streptomyces nursei. The molecular formula for Nystatin is C47H75NO17. The molecular weight of Nystatin is 926.1. Structural formula. Nystatin Topical Powder USP is for dermatologic use. Nystatin Topical Powder USP contains 100,000 USP nystatin units per gram dispersed in talc."
},
{
"NDCCode": "72162-1126-2",
"PackageDescription": "1 TUBE in 1 CARTON (72162-1126-2) / 45 g in 1 TUBE",
"NDC11Code": "72162-1126-02",
"ProductNDC": "72162-1126",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ciclopirox",
"NonProprietaryName": "Ciclopirox",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20090107",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078266",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "CICLOPIROX",
"StrengthNumber": "7.7",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Decreased DNA Replication [PE], Decreased Protein Synthesis [PE], Decreased RNA Replication [PE], Protein Synthesis Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240311",
"SamplePackage": "N",
"IndicationAndUsage": "Superficial Dermatophyte Infections. Ciclopirox Gel, 0.77% is indicated for the topical treatment of interdigital tinea pedis and tinea corporis due to Trichophyton rubrum, Trichophyton mentagrophytes, or Epidermophyton floccosum. Seborrheic Dermatitis. Ciclopirox Gel, 0.77% is indicated for the topical treatment of seborrheic dermatitis of the scalp.",
"Description": "Ciclopirox Gel, 0.77% contains a synthetic antifungal agent, ciclopirox. It is intended for topical dermatologic use only. Each gram of Ciclopirox Gel, 0.77% contains 7.70 mg of ciclopirox in a gel consisting of Purified Water USP, Isopropyl Alcohol USP, Octyldodecanol NF, Dimethicone Copolyol 190, Carbomer 980, Sodium Hydroxide NF, and Docusate Sodium USP. Ciclopirox Gel, 0.77% is a white, slightly fluid gel. The chemical name for ciclopirox is 6-cyclohexyl-1-hydroxy-4-methyl-2(1H)- pyridinone, with the empirical formula C12H17NO2 and a molecular weight of 207.27. The CAS Registry Number is [29342-05-0]. The chemical structure is."
},
{
"NDCCode": "72162-1128-2",
"PackageDescription": "10 mL in 1 BOTTLE, PLASTIC (72162-1128-2) ",
"NDC11Code": "72162-1128-02",
"ProductNDC": "72162-1128",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tobramycin And Dexamethasone",
"NonProprietaryName": "Tobramycin And Dexamethasone",
"DosageFormName": "SUSPENSION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20220317",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212715",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "TOBRAMYCIN; DEXAMETHASONE",
"StrengthNumber": "3; 1",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241224",
"SamplePackage": "N",
"IndicationAndUsage": "INDICATIONS AND USAGE: Tobramycin and dexamethasone ophthalmic suspension is indicated for steroid-responsive inflammatory ocular conditions for which a corticosteroid is indicated and where superficial bacterial ocular infection or a risk of bacterial ocular infection exists. Ocular steroids are indicated in inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe where the inherent risk of steroid use in certain infective conjunctivitides is accepted to obtain a diminution in edema and inflammation. They are also indicated in chronic anterior uveitis and corneal injury from chemical, radiation or thermal burns, or penetration of foreign bodies. The use of a combination drug with an anti-infective component is indicated where the risk of superficial ocular infection is high or where there is an expectation that potentially dangerous numbers of bacteria will be present in the eye. The particular anti-infective drug in this product is active against the following common bacterial eye pathogens. Staphylococci, including S. aureus and S. epidermidis (coagulase-positive and coagulase-negative), including penicillin-resistant strains. Streptococci, including some of the Group A-beta-hemolytic species, some nonhemolytic species, and some Streptococcus pneumoniae. Pseudomonas aeruginosa, Escherichia coli, Klebsiella pneumoniae, Enterobacter aerogenes, Proteus mirabilis, Morganella morganii, most Proteus vulgaris strains, Haemophilus influenzae and H. aegyptius, Moraxella lacunata, Acinetobacter calcoaceticus and some Neisseria species.",
"Description": "DESCRIPTION: Tobramycin and dexamethasone ophthalmic suspension USP is a sterile, multiple dose antibiotic and steroid combination for topical ophthalmic use with a pH of approximately 5.5 and an osmolality of approximately 300 mOsm/kg. The chemical structures for tobramycin and dexamethasone are presented below. Tobramycin. Empirical Formula: C18H37N5O9. Chemical Name: O-3-Amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine. MW: 467.52. Dexamethasone. Empirical Formula: C22H29FO5. Chemical Name: 9-Fluoro-11β,17,21-trihydroxy-16α-methylpregna-1,4-diene-3,20-dione. MW: 392.47. Each mL of Tobramycin and dexamethasone ophthalmic suspension contains: Actives: tobramycin 0.3% (3 mg) and dexamethasone 0.1% (1 mg). Preservative: benzalkonium chloride 0.01%. Inactives: edetate disodium dihydrate, hydroxyethyl cellulose, sodium chloride, sodium sulfate anhydrous, sulfuric acid and/or sodium hydroxide (to adjust pH), tyloxapol, and water for injection."
},
{
"NDCCode": "72162-1128-7",
"PackageDescription": "2.5 mL in 1 BOTTLE, PLASTIC (72162-1128-7) ",
"NDC11Code": "72162-1128-07",
"ProductNDC": "72162-1128",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tobramycin And Dexamethasone",
"NonProprietaryName": "Tobramycin And Dexamethasone",
"DosageFormName": "SUSPENSION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20220317",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212715",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "TOBRAMYCIN; DEXAMETHASONE",
"StrengthNumber": "3; 1",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241224",
"SamplePackage": "N",
"IndicationAndUsage": "INDICATIONS AND USAGE: Tobramycin and dexamethasone ophthalmic suspension is indicated for steroid-responsive inflammatory ocular conditions for which a corticosteroid is indicated and where superficial bacterial ocular infection or a risk of bacterial ocular infection exists. Ocular steroids are indicated in inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe where the inherent risk of steroid use in certain infective conjunctivitides is accepted to obtain a diminution in edema and inflammation. They are also indicated in chronic anterior uveitis and corneal injury from chemical, radiation or thermal burns, or penetration of foreign bodies. The use of a combination drug with an anti-infective component is indicated where the risk of superficial ocular infection is high or where there is an expectation that potentially dangerous numbers of bacteria will be present in the eye. The particular anti-infective drug in this product is active against the following common bacterial eye pathogens. Staphylococci, including S. aureus and S. epidermidis (coagulase-positive and coagulase-negative), including penicillin-resistant strains. Streptococci, including some of the Group A-beta-hemolytic species, some nonhemolytic species, and some Streptococcus pneumoniae. Pseudomonas aeruginosa, Escherichia coli, Klebsiella pneumoniae, Enterobacter aerogenes, Proteus mirabilis, Morganella morganii, most Proteus vulgaris strains, Haemophilus influenzae and H. aegyptius, Moraxella lacunata, Acinetobacter calcoaceticus and some Neisseria species.",
"Description": "DESCRIPTION: Tobramycin and dexamethasone ophthalmic suspension USP is a sterile, multiple dose antibiotic and steroid combination for topical ophthalmic use with a pH of approximately 5.5 and an osmolality of approximately 300 mOsm/kg. The chemical structures for tobramycin and dexamethasone are presented below. Tobramycin. Empirical Formula: C18H37N5O9. Chemical Name: O-3-Amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine. MW: 467.52. Dexamethasone. Empirical Formula: C22H29FO5. Chemical Name: 9-Fluoro-11β,17,21-trihydroxy-16α-methylpregna-1,4-diene-3,20-dione. MW: 392.47. Each mL of Tobramycin and dexamethasone ophthalmic suspension contains: Actives: tobramycin 0.3% (3 mg) and dexamethasone 0.1% (1 mg). Preservative: benzalkonium chloride 0.01%. Inactives: edetate disodium dihydrate, hydroxyethyl cellulose, sodium chloride, sodium sulfate anhydrous, sulfuric acid and/or sodium hydroxide (to adjust pH), tyloxapol, and water for injection."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>72162-1505-2</NDCCode>
<PackageDescription>210 g in 1 CAN (72162-1505-2) </PackageDescription>
<NDC11Code>72162-1505-02</NDC11Code>
<ProductNDC>72162-1505</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cholestyramine</ProprietaryName>
<NonProprietaryName>Cholestyramine</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050915</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077203</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>CHOLESTYRAMINE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>g/5g</StrengthUnit>
<Pharm_Classes>Bile Acid Sequestrant [EPC], Bile-acid Binding Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240315</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1) Cholestyramine for Oral Suspension USP is indicated as adjunctive therapy to diet for the reduction of elevated serum cholesterol in patients with primary hypercholesterolemia (elevated low density lipoprotein [LDL] cholesterol) who do not respond adequately to diet. Cholestyramine may be useful to lower LDL cholesterol in patients who also have hypertriglyceridemia, but it is not indicated where hypertriglyceridemia is the abnormality of most concern. Therapy with lipid-altering agents should be a component of multiple risk factor intervention in those individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Treatment should begin and continue with dietary therapy specific for the type of hyperlipoproteinemia determined prior to initiation of drug therapy. Excess body weight may be an important factor and caloric restriction for weight normalization should be addressed prior to drug therapy in the overweight. Prior to initiating therapy with Cholestyramine, secondary causes of hypercholesterolemia (e.g., poorly controlled diabetes mellitus, hypothyroidism, nephrotic syndrome, dysproteinemias, obstructive liver disease, other drug therapy, alcoholism), should be excluded, and a lipid profile performed to assess Total cholesterol, HDL-C, and triglycerides (TG). For individuals with TG less than 400 mg/dL (<4.5 mmol/L), LDL-C can be estimated using the following equation. LDL-C = Total cholesterol – [(TG/5) + HDL-C]. For TG levels >400 mg/dL, this equation is less accurate and LDL-C concentrations should be determined by ultracentrifugation. In hypertriglyceridemic patients, LDL-C may be low or normal despite elevated Total-C. In such cases Cholestyramine may not be indicated. Serum cholesterol and triglyceride levels should be determined periodically based on NCEP guidelines to confirm initial and adequate long-term response. A favorable trend in cholesterol reduction should occur during the first month of Cholestyramine therapy. The therapy should be continued to sustain cholesterol reduction. If adequate cholesterol reduction is not attained, increasing the dosage of Cholestyramine or adding other lipid-lowering agents in combination with Cholestyramine should be considered. Since the goal of treatment is to lower LDL-C, the NCEP 4 recommends that LDL-C levels be used to initiate and assess treatment response. If LDL-C levels are not available then Total-C alone may be used to monitor long-term therapy. A lipoprotein analysis (including LDL-C determination) should be carried out once a year. The NCEP treatment guidelines are summarized below. Cholestyramine monotherapy has been demonstrated to retard the rate of progression 2,3 and increase the rate of regression3 of coronary atherosclerosis. 2) Cholestyramine for oral suspension is indicated for the relief of pruritus associated with partial biliary obstruction. Cholestyramine for oral suspension has been shown to have a variable effect on serum cholesterol in these patients. Patients with primary biliary cirrhosis may exhibit an elevated cholesterol as part of their disease.</IndicationAndUsage>
<Description>Cholestyramine for Oral Suspension USP, the chloride salt of a basic anion exchange resin, a cholesterol lowering agent, is intended for oral administration. Cholestyramine resin is quite hydrophilic, but insoluble in water. The cholestyramine resin in Cholestyramine is not absorbed from the digestive tract. Four grams of anhydrous cholestyramine resin is contained in 9 grams of Cholestyramine for Oral Suspension USP. Four grams of anhydrous cholestyramine resin is contained in 5 grams of Cholestyramine for Oral Suspension USP, Light. It is represented by the following structural formula. Cholestyramine for Oral Suspension USP contains the following inactive ingredients: acacia, citric acid, D&C Yellow No. 10, FD&C Yellow No. 6, flavor (natural and artificial Orange), polysorbate 80, propylene glycol alginate and sucrose. Cholestyramine for Oral Suspension USP, Light contains the following inactive ingredients: aspartame, citric acid, colloidal silicon dioxide, D&C Yellow No. 10, FD&C Red No. 40, flavor (natural and artificial Orange), maltodextrin, propylene glycol alginate and xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>36987-1505-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (36987-1505-2)</PackageDescription>
<NDC11Code>36987-1505-02</NDC11Code>
<ProductNDC>36987-1505</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rhubarb</ProprietaryName>
<NonProprietaryName>Rhubarb</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>RHUBARB</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Plant Allergenic Extract [EPC],Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Plant Proteins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>37662-1505-2</NDCCode>
<PackageDescription>1200 PELLET in 1 BOTTLE, GLASS (37662-1505-2) </PackageDescription>
<NDC11Code>37662-1505-02</NDC11Code>
<ProductNDC>37662-1505</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Linum Usitatissimum</ProprietaryName>
<NonProprietaryName>Linum Usitatissimum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220913</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>FLAX SEED</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Dietary Proteins [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Food Allergenic Extract [EPC], Non-Standardized Plant Allergenic Extract [EPC], Plant Proteins [CS], Seed Storage Proteins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-09-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220913</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>51552-1505-2</NDCCode>
<PackageDescription>50 g in 1 CONTAINER (51552-1505-2)</PackageDescription>
<NDC11Code>51552-1505-02</NDC11Code>
<ProductNDC>51552-1505</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Lipopen Anhydrous</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<StartMarketingDate>20120101</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Fagron Inc</LabelerName>
<SubstanceName>TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>51662-1505-3</NDCCode>
<PackageDescription>25 POUCH in 1 CASE (51662-1505-3) / 1 VIAL, MULTI-DOSE in 1 POUCH (51662-1505-2) / 50 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>51662-1505-03</NDC11Code>
<ProductNDC>51662-1505</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hci And Epinephrine</ProprietaryName>
<NonProprietaryName>Lidocaine Hci And Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20200311</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA006488</ApplicationNumber>
<LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS; EPINEPHRINE BITARTRATE</SubstanceName>
<StrengthNumber>20; .01</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220317</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Xylocaine (lidocaine HCl) Injections are indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.</IndicationAndUsage>
<Description>Xylocaine (lidocaine HCl) Injections are sterile, nonpyrogenic, aqueous solutions that contain a local anesthetic agent with or without epinephrine and are administered parenterally by injection. See INDICATIONS AND USAGE uses. Xylocaine solutions contain lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C 14H 22N 2O HCl) has the following structural formula. Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21. Epinephrine (C 9H 13NO 3) has the following structural formula. Dosage forms listed as Xylocaine-MPF indicate single dose solutions that are Methyl Paraben Free (MPF). Xylocaine MPF is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. Xylocaine in multiple dose vials: Each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Xylocaine MPF with Epinephrine is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer. Xylocaine with Epinephrine in multiple dose vials: Each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid. Filled under nitrogen.</Description>
</NDC>
<NDC>
<NDCCode>55714-1505-2</NDCCode>
<PackageDescription>59.14 mL in 1 BOTTLE, GLASS (55714-1505-2)</PackageDescription>
<NDC11Code>55714-1505-02</NDC11Code>
<ProductNDC>55714-1505</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Constipation</ProprietaryName>
<NonProprietaryName>Abies Nig., Aesculus Hipp., Aloe, Alumina, Bryonia, Carbo Veg., Chelidonium Majus, Collinsonia, Graphites, Hydrastis, Kali Carb., Lycopodium, Mag. Mur., Mezereum, Nux Vom., Podoph. Pelt., Rhamnus Purshiana, Sanicula, Selenium, Sepia, Silicea, Tabacum, Veratrum Alb., Zinc. Met., Echinacea, Iris Versicolor, Phytolacca, Taraxacum</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110301</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Newton Laboratories, Inc.</LabelerName>
<SubstanceName>PICEA MARIANA RESIN; HORSE CHESTNUT; ALOE; ALUMINUM OXIDE; BRYONIA ALBA ROOT; ACTIVATED CHARCOAL; CHELIDONIUM MAJUS; COLLINSONIA CANADENSIS ROOT; GRAPHITE; GOLDENSEAL; POTASSIUM CARBONATE; LYCOPODIUM CLAVATUM SPORE; MAGNESIUM CHLORIDE; DAPHNE MEZEREUM BARK; STRYCHNOS NUX-VOMICA SEED; PODOPHYLLUM; FRANGULA PURSHIANA BARK; SANICULA EUROPAEA LEAF; SELENIUM; SEPIA OFFICINALIS JUICE; SILICON DIOXIDE; TOBACCO LEAF; VERATRUM ALBUM ROOT; ZINC; ECHINACEA, UNSPECIFIED; IRIS VERSICOLOR ROOT; PHYTOLACCA AMERICANA ROOT; TARAXACUM OFFICINALE</SubstanceName>
<StrengthNumber>15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 3; 3; 3; 3</StrengthNumber>
<StrengthUnit>[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Constipation Formulated for associated symptoms such as difficult elimination, hard stools, pain, tenderness, pressure and irritability.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>69238-1505-2</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (69238-1505-2) / 1 PATCH in 1 POUCH / 168 h in 1 PATCH</PackageDescription>
<NDC11Code>69238-1505-02</NDC11Code>
<ProductNDC>69238-1505</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buprenorphine</ProprietaryName>
<NonProprietaryName>Buprenorphine</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20200420</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211586</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>BUPRENORPHINE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>ug/h</StrengthUnit>
<Pharm_Classes>Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200420</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buprenorphine transdermal system is indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including buprenorphine transdermal system, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.</IndicationAndUsage>
<Description>Buprenorphine transdermal system is a transdermal system providing systemic delivery of buprenorphine, a mu opioid partial agonist analgesic, continuously for 7 days. The chemical name of buprenorphine is 6,14- ethenomorphinan-7-methanol, 17-(cyclopropylmethyl)- α-(1,1-dimethylethyl)-4, 5-epoxy-18, 19-dihydro-3-hydroxy-6-methoxy-α-methyl-, [5α, 7α, (S)]. The structural formula is. The molecular weight of buprenorphine is 467.6; the empirical formula is C29H41NO4. Buprenorphine occurs as a white or almost white powder and is very slightly soluble in water, freely soluble in acetone, soluble in methanol and ether, and slightly soluble in cyclohexane. The pKa is 8.5 and the melting point is about 217°C. System Components and Structure. Five different strengths of buprenorphine transdermal system are available: 5, 7.5, 10, 15, and 20 mcg/hour (Table 6). The proportion of buprenorphine mixed in the adhesive matrix is the same in each of the five strengths. The amount of buprenorphine released from each system per hour is proportional to the active surface area of the system. The skin is the limiting barrier to diffusion from the system into the bloodstream. Table 6: Buprenorphine Transdermal System Product Specifications. Buprenorphine transdermal system is a rectangular or square, beige-colored system consisting of a protective liner and functional layers. Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a beige-colored web backing layer; (2) an adhesive rim without buprenorphine; (3) a separating layer over the buprenorphine-containing adhesive matrix; (4) the buprenorphine-containing adhesive matrix; and (5) a peel-off release liner. Before use, the release liner covering the adhesive layer is removed and discarded. Figure 1: Cross-Section Diagram of Buprenorphine Transdermal System (not to scale). The active ingredient in buprenorphine transdermal system is buprenorphine. The inactive ingredients in each system are: acrylic adhesive, levulinic acid, oleyl oleate, and povidone.</Description>
</NDC>
<NDC>
<NDCCode>70274-1505-2</NDCCode>
<PackageDescription>118 mL in 1 BOTTLE (70274-1505-2)</PackageDescription>
<NDC11Code>70274-1505-02</NDC11Code>
<ProductNDC>70274-1505</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Mhs Pain Relief Oil</ProprietaryName>
<NonProprietaryName>Camphor Oil</NonProprietaryName>
<DosageFormName>OIL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20151227</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part348</ApplicationNumber>
<LabelerName>Modern Herb Shop Inc.</LabelerName>
<SubstanceName>CAMPHOR (NATURAL)</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>g/4576mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-05-31</LastUpdate>
</NDC>
<NDC>
<NDCCode>71335-1505-2</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (71335-1505-2) </PackageDescription>
<NDC11Code>71335-1505-02</NDC11Code>
<ProductNDC>71335-1505</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190719</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210432</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-05-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220920</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsules are indicated for: : 1 Management of neuropathic pain associated with diabetic peripheral neuropathy, 2 Management of postherpetic neuralgia, 3 Adjunctive therapy for the treatment of partial-onset seizures in patients 1 month of age and older, 4 Management of fibromyalgia, 5 Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
<Description>Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin is a white or almost white powder with a pKa1 of 4.4 and a pKa2 of 10.1. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (Octanol : Water) is – 1.0. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25, 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with pregelatinized starch and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the orange & red capsule shells contain red iron oxide. The imprinting ink contains shellac, black iron oxide, propylene glycol, and potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>73637-1505-3</NDCCode>
<PackageDescription>1500 PACKET in 1 BAG (73637-1505-3) / 80 PELLET in 1 PACKET (73637-1505-2) </PackageDescription>
<NDC11Code>73637-1505-03</NDC11Code>
<ProductNDC>73637-1505</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<NonProprietaryName>Sofosbuvir</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<StartMarketingDate>20190828</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>IversLee AG</LabelerName>
<SubstanceName>SOFOSBUVIR</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>28-AUG-19</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>22840-1505-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (22840-1505-1) </PackageDescription>
<NDC11Code>22840-1505-01</NDC11Code>
<ProductNDC>22840-1505</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Sunflower</ProprietaryName>
<NonProprietaryName>Helianthus Annuus</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>HELIANTHUS ANNUUS POLLEN</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies. .</IndicationAndUsage>
<Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
</NDC>
<NDC>
<NDCCode>51662-1505-1</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (51662-1505-1) </PackageDescription>
<NDC11Code>51662-1505-01</NDC11Code>
<ProductNDC>51662-1505</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hci And Epinephrine</ProprietaryName>
<NonProprietaryName>Lidocaine Hci And Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20200311</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA006488</ApplicationNumber>
<LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS; EPINEPHRINE BITARTRATE</SubstanceName>
<StrengthNumber>20; .01</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200311</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Xylocaine (lidocaine HCl) Injections are indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.</IndicationAndUsage>
<Description>Xylocaine (lidocaine HCl) Injections are sterile, nonpyrogenic, aqueous solutions that contain a local anesthetic agent with or without epinephrine and are administered parenterally by injection. See INDICATIONS AND USAGE uses. Xylocaine solutions contain lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C 14H 22N 2O HCl) has the following structural formula. Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21. Epinephrine (C 9H 13NO 3) has the following structural formula. Dosage forms listed as Xylocaine-MPF indicate single dose solutions that are Methyl Paraben Free (MPF). Xylocaine MPF is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. Xylocaine in multiple dose vials: Each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Xylocaine MPF with Epinephrine is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer. Xylocaine with Epinephrine in multiple dose vials: Each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid. Filled under nitrogen.</Description>
</NDC>
<NDC>
<NDCCode>53002-1505-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (53002-1505-3) </PackageDescription>
<NDC11Code>53002-1505-03</NDC11Code>
<ProductNDC>53002-1505</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine</ProprietaryName>
<NonProprietaryName>Olanzapine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120423</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090798</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>OLANZAPINE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Olanzapine tablets are an atypical antipsychotic indicated. As oral formulation for the: 1 Treatment of schizophrenia. (1.1)Adults: Efficacy was established in three clinical trials in patients with schizophrenia: two 6-week trials and one maintenance trial. (14.1) Adolescents (ages 13 to 17): Efficacy was established in one 6- week trial in patients with schizophrenia (14.1). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.1), 2 Acute treatment of manic or mixed episodes associated with bipolar I disorder and maintenance treatment of bipolar I disorder. (1.2)Adults: Efficacy was established in three clinical trials in patients with manic or mixed episodes of bipolar I disorder: two 3- to 4-week trials and one maintenance trial. (14.2) Adolescents (ages 13 to 17): Efficacy was established in one 3- week trial in patients with manic or mixed episodes associated with bipolar I disorder (14.2). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.2), 3 Medication therapy for pediatric patients with schizophrenia or bipolar I disorder should be undertaken only after a thorough diagnostic evaluation and with careful consideration of the potential risks. (1.3), 4 Adjunct to valproate or lithium in the treatment of manic or mixed episodes associated with bipolar I disorder. (1.2)Efficacy was established in two 6-week clinical trials in adults (14.2). Maintenance efficacy has not been systematically evaluated. .</IndicationAndUsage>
<Description>Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.43. The chemical structure is:. Olanzapine is a yellow powder. Olanzapine tablets, USP are intended for oral administration only. Each tablet contains olanzapine equivalent to 2.5 mg (8 mcmol), 5 mg (16 mcmol), 7.5 mg (24 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol), or 20 mg (64 mcmol). Inactive ingredients are lactose, magnesium stearate, microcrystalline cellulose, starch. The color coating contains FD&C blue No.2 aluminum lake (15 mg), ferric oxide red (20 mg), hydroxypropyl cellulose, hypromellose, iron oxide yellow (20 mg), polyethylene glycol and titanium dioxide (all strengths).</Description>
</NDC>
<NDC>
<NDCCode>72162-1000-2</NDCCode>
<PackageDescription>120 CAPSULE in 1 BOTTLE (72162-1000-2) </PackageDescription>
<NDC11Code>72162-1000-02</NDC11Code>
<ProductNDC>72162-1000</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Icosapent Ethyl</ProprietaryName>
<NonProprietaryName>Icosapent Ethyl</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201104</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209457</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ICOSAPENT ETHYL</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Icosapent ethyl is indicated: 1 as an adjunct to diet to reduce triglyceride (TG) levels in adult patients with severe (≥500 mg/dL) hypertriglyceridemia. .</IndicationAndUsage>
<Description>Icosapent ethyl, a lipid-regulating agent, is supplied as a 0.5 gram and 1 gram, liquid-filled soft gelatin capsule for oral administration. Each icosapent ethyl capsule contains either 0.5 grams of icosapent ethyl or 1 gram of icosapent ethyl. Icosapent ethyl is an ethyl ester of the omega-3 fatty acid eicosapentaenoic acid (EPA). The empirical formula of icosapent ethyl is C22H34O2 and the molecular weight is 330.5. The chemical name for icosapent ethyl is ethyl all-cis-5,8,11,14,17-icosapentaenoate with the following chemical structure. Each capsule contains the following inactive ingredients: gelatin, glycerin, purified water, sorbitol, sorbitan and tocopherol. The monogramming ink ingredients contain: ammonium hydroxide, iron oxide black, isopropyl alcohol, macrogol, polyvinyl acetate phthalate, propylene glycol, purified water and SDA alcohol (ethanol and ethyl acetate).</Description>
</NDC>
<NDC>
<NDCCode>72162-1048-2</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (72162-1048-2) / 45 g in 1 TUBE</PackageDescription>
<NDC11Code>72162-1048-02</NDC11Code>
<ProductNDC>72162-1048</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Adapalene</ProprietaryName>
<NonProprietaryName>Adapalene</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20100630</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090824</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ADAPALENE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240223</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Adapalene cream is indicated for the topical treatment of acne vulgaris.</IndicationAndUsage>
<Description>Adapalene cream, 0.1%, contains adapalene 0.1% in an aqueous cream emulsion consisting of carbomer 934P, cyclomethicone, edetate disodium, glycerin, methyl glucose sesquistearate, methylparaben, PEG-20 methyl glucose sesquistearate, phenoxyethanol, propylparaben, purified water, squalane, and trolamine. The chemical name of adapalene is 6-[3-(1-adamantyl)-4-methoxyphenyl]-2-naphthoic acid. It is a white to off-white powder which is soluble in tetrahydrofuran, sparingly soluble in ethanol, and practically insoluble in water. The molecular formula is C28H28O3 and molecular weight is 412.52. Adapalene is represented by the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>72162-1059-2</NDCCode>
<PackageDescription>45 TABLET, EXTENDED RELEASE in 1 BOTTLE (72162-1059-2) </PackageDescription>
<NDC11Code>72162-1059-02</NDC11Code>
<ProductNDC>72162-1059</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alprazolam</ProprietaryName>
<ProprietaryNameSuffix>Extended Release</ProprietaryNameSuffix>
<NonProprietaryName>Alprazolam</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070312</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078056</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ALPRAZOLAM</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2023-05-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230508</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Alprazolam extended-release tablets, USP contain alprazolam, USP which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-α] [1,4] benzodiazepine. The molecular formula is C17H13ClN4 which corresponds to a molecular weight of 308.76. The structural formula is represented below. Alprazolam, USP is a white crystalline powder, which is soluble in methanol or ethanol but which has no appreciable solubility in water at physiological pH. Each alprazolam extended-release tablet USP, for oral administration, contains 0.5 mg, 1 mg, 2 mg, or 3 mg of alprazolam, USP. The inactive ingredients are lactose monohydrate, hypromellose, and magnesium stearate. In addition, the 1 mg tablets also contain D&C yellow #10 aluminum lake. The 2 mg tablets also contain FD&C Yellow #6 aluminum lake, and the 3 mg tablets also contain D&C Yellow #10 aluminum lake, and FD&C Blue #2 aluminum lake. Product meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>72162-1071-2</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (72162-1071-2) / 45 g in 1 TUBE</PackageDescription>
<NDC11Code>72162-1071-02</NDC11Code>
<ProductNDC>72162-1071</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tretinoin</ProprietaryName>
<NonProprietaryName>Tretinoin</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20190812</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA017955</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>TRETINOIN</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tretinoin is indicated for topical application in the treatment of acne vulgaris. The safety and efficacy of the long-term use of this product in the treatment of other disorders have not been established.</IndicationAndUsage>
<Description>Tretinoin Cream and Tretinoin Gel are used for the topical treatment of acne vulgaris. Tretinoin Gel contains tretinoin (retinoic acid, vitamin A acid) in either of two strengths, 0.025% or 0.01% by weight, in a gel vehicle of butylated hydroxytoluene, hydroxypropyl cellulose and alcohol (denatured with tert-butyl alcohol and brucine sulfate) 90% w/w. Tretinoin Cream contains tretinoin in one of three strengths, 0.1%, 0.05%, or 0.025% by weight, in a hydrophilic cream vehicle of stearic acid, isopropyl myristate, polyoxyl 40 stearate, stearyl alcohol, xanthan gum, sorbic acid, butylated hydroxytoluene, and purified water. Chemically, tretinoin is all-trans-retinoic acid and has the following structure:.</Description>
</NDC>
<NDC>
<NDCCode>72162-1072-2</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (72162-1072-2) / 45 g in 1 TUBE</PackageDescription>
<NDC11Code>72162-1072-02</NDC11Code>
<ProductNDC>72162-1072</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tretinoin</ProprietaryName>
<NonProprietaryName>Tretinoin</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20190712</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA017579</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>TRETINOIN</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tretinoin is indicated for topical application in the treatment of acne vulgaris. The safety and efficacy of the long-term use of this product in the treatment of other disorders have not been established.</IndicationAndUsage>
<Description>Tretinoin Cream and Tretinoin Gel are used for the topical treatment of acne vulgaris. Tretinoin Gel contains tretinoin (retinoic acid, vitamin A acid) in either of two strengths, 0.025% or 0.01% by weight, in a gel vehicle of butylated hydroxytoluene, hydroxypropyl cellulose and alcohol (denatured with tert-butyl alcohol and brucine sulfate) 90% w/w. Tretinoin Cream contains tretinoin in one of three strengths, 0.1%, 0.05%, or 0.025% by weight, in a hydrophilic cream vehicle of stearic acid, isopropyl myristate, polyoxyl 40 stearate, stearyl alcohol, xanthan gum, sorbic acid, butylated hydroxytoluene, and purified water. Chemically, tretinoin is all-trans-retinoic acid and has the following structure:.</Description>
</NDC>
<NDC>
<NDCCode>72162-1076-2</NDCCode>
<PackageDescription>90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (72162-1076-2) </PackageDescription>
<NDC11Code>72162-1076-02</NDC11Code>
<ProductNDC>72162-1076</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride</ProprietaryName>
<NonProprietaryName>Potassium Chloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208864</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240405</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium chloride extended-release capsules are indicated for the treatment and prophylaxis of hypokalemia in adults and children with or without metabolic alkalosis, in patients for whom dietary management with potassium-rich foods or diuretic dose reduction is insufficient.</IndicationAndUsage>
<Description>Potassium chloride extended-release capsules, USP, are an oral dosage form of microencapsulated potassium chloride containing 600 mg and 750 mg of potassium chloride, USP, equivalent to 8 mEq and 10 mEq of potassium, respectively. The chemical name of the active ingredient is potassium chloride and the structural formula is KCl. It has a molecular mass of 74.55. Potassium chloride, USP, occurs as a white granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Inactive ingredients: ethylcellulose, gelatin, magnesium stearate, sodium lauryl sulfate, titanium dioxide and edible black ink. The 10 mEq capsules also contain black iron oxide, FD&C blue No.1 and FD&C red No.3.</Description>
</NDC>
<NDC>
<NDCCode>72162-1085-2</NDCCode>
<PackageDescription>30 mL in 1 BOTTLE, PLASTIC (72162-1085-2) </PackageDescription>
<NDC11Code>72162-1085-02</NDC11Code>
<ProductNDC>72162-1085</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methadone Hydrocloride</ProprietaryName>
<ProprietaryNameSuffix>Dye-free, Sugar-free, Unflavored</ProprietaryNameSuffix>
<NonProprietaryName>Methadone Hydrochloride</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212093</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>METHADONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231005</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methadone Hydrochloride contains methadone, an opioid agonist indicated for the: 1 detoxification treatment of opioid addiction (heroin or other morphine-like drugs)., 2 maintenance treatment of opioid addiction (heroin or other morphine-like drugs), in conjunction with appropriate social and medical services.</IndicationAndUsage>
<Description>Methadone Hydrochloride Oral Concentrate, USP dye-free, sugar-free, unflavored contains methadone, an opioid agonist, and is available as a dye-free, sugar-free, unflavored liquid concentrate of methadone hydrochloride for oral administration. Methadone hydrochloride is chemically described as 6-(dimethylamino)-4,4-diphenyl-3-heptone hydrochloride. Methadone hydrochloride, USP is a fine white powder. It is very soluble in water, soluble in isopropanol and in chloroform, and practically insoluble in ether and in glycerine. It is present in Methadone Hydrochloride as the racemic mixture. Methadone hydrochloride has a melting point of 235°C, a pKa of 8.25 in water at 20°C, a solution (1 part per 100) pH between 4.5 and 6.5, a partition coefficient of 117 at pH 7.4 in octanol/water and a molecular weight of 345.91. Its structural formula is C21H27NOHCl. This liquid concentrate contains 10 mg of methadone hydrochloride (equivalent to 8.95 mg of methadone) per mL and the following inactive ingredients: citric acid anhydrous, purified water, sodium benzoate.</Description>
</NDC>
<NDC>
<NDCCode>72162-1098-2</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (72162-1098-2) / 50 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>72162-1098-02</NDC11Code>
<ProductNDC>72162-1098</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070227</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040710</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230926</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine Hydrochloride Topical Solution USP, 4% is indicated for the production of topical anesthesia of accessible mucous membranes of the oral and nasal cavities and proximal portions of the digestive tract.</IndicationAndUsage>
<Description>Lidocaine Hydrochloride Topical Solution USP, 4% contains a local anesthetic agent and is administered topically. See INDICATIONS for specific uses. Lidocaine Hydrochloride Topical Solution USP, 4% contains lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the following structural formula. The 50 mL screw-cap bottle should not be autoclaved, because the closure employed cannot withstand autoclaving temperatures and pressures. Composition of Lidocaine Hydrochloride Topical Solution USP, 4%: Each mL contains lidocaine HCl, 40 mg, methylparaben, and sodium hydroxide and/or hydrochloric acid to adjust pH to 5.0 to 7.0. An aqueous solution. NOT FOR INJECTION.</Description>
</NDC>
<NDC>
<NDCCode>72162-1108-2</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (72162-1108-2) </PackageDescription>
<NDC11Code>72162-1108-02</NDC11Code>
<ProductNDC>72162-1108</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Trospium Chloride</ProprietaryName>
<NonProprietaryName>Trospium Chloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101117</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091573</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>TROSPIUM CHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231009</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Trospium Chloride Tablets are a muscarinic antagonist indicated for the treatment of overactive bladder (OAB) with symptoms of urge urinary incontinence, urgency, and urinary frequency.</IndicationAndUsage>
<Description>Trospium chloride is a quaternary ammonium compound with the chemical name of Spiro[8-azoniabicyclo[3.2.1]octane-8,1'-pyrrolidinium], 3-[(hydroxydiphenylacetyl)oxy]-, chloride, (1α, 3β, 5α). The empirical formula of trospium chloride is C25H30ClNO3 and its molecular weight is 427.97. The structural formula of trospium chloride is represented below. Trospium chloride is a fine, colorless to slightly yellow, crystalline solid. The compound's solubility in water is approximately 1 g per 2 mL. Each Trospium Chloride Tablet contains 20 mg of trospium chloride, a muscarinic antagonist, for oral administration. Each tablet also contains the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, calcium carbonate, croscarmellose sodium, povidone, hypromellose, talc, stearic acid, titanium dioxide, colloidal silicon dioxide, magnesium stearate and polyethylene glycol 3350.</Description>
</NDC>
<NDC>
<NDCCode>72162-1109-2</NDCCode>
<PackageDescription>1 BOTTLE, GLASS in 1 CARTON (72162-1109-2) / 118 mL in 1 BOTTLE, GLASS</PackageDescription>
<NDC11Code>72162-1109-02</NDC11Code>
<ProductNDC>72162-1109</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Midazolam Hydrochloride</ProprietaryName>
<NonProprietaryName>Midazolam Hydrochloride</NonProprietaryName>
<DosageFormName>SYRUP</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050502</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076379</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2023-10-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231025</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Midazolam HCl syrup is indicated for use in pediatric patients for sedation, anxiolysis and amnesia prior to diagnostic, therapeutic or endoscopic procedures or before induction of anesthesia. Midazolam HCl syrup is intended for use in monitored settings only and not for chronic or home use [see WARNINGS].</IndicationAndUsage>
<Description>Midazolam is a benzodiazepine available as midazolam HCl syrup for oral administration. Midazolam, a white to light yellow crystalline compound, is insoluble in water, but can be solubilized in aqueous solutions by formation of the hydrochloride salt in situ under acidic conditions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the molecular formula C18H13ClFN3·HCl, a calculated molecular weight of 362.25 and the following structural formula. Each mL of the syrup contains midazolam hydrochloride equivalent to 2 mg midazolam compounded with artificial bitterness modifier, citric acid anhydrous, D&C Red #33, edetate disodium, glycerin, mixed fruit flavor, sodium benzoate, sodium citrate, sorbitol, and water; the pH is adjusted to 2.8 to 3.6 with hydrochloric acid. Under the acidic conditions required to solubilize midazolam in the syrup, midazolam is present as an equilibrium mixture (shown below) of the closed ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the syrup, the solution may contain up to about 40% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart below plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 2.8 to 3.6. Above pH 5, at least 99% of the mixture is present in the closed-ring form.</Description>
</NDC>
<NDC>
<NDCCode>72162-1117-2</NDCCode>
<PackageDescription>1 BOTTLE, WITH APPLICATOR in 1 CARTON (72162-1117-2) / 15 mL in 1 BOTTLE, WITH APPLICATOR</PackageDescription>
<NDC11Code>72162-1117-02</NDC11Code>
<ProductNDC>72162-1117</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Podocon 25</ProprietaryName>
<NonProprietaryName>Podophyllum Resin</NonProprietaryName>
<DosageFormName>TINCTURE</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19900901</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>PODOPHYLLUM RESIN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/4mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Podocon-25® (25% podophyllin in benzoin tincture) is indicated for the removal of soft genital (venereal) warts (condylomata acuminata)(4).</IndicationAndUsage>
<Description>Podocon-25® is composed of Podophyllin (Podophyllum Resin, American) 25% in Benzoin Tincture. Podophyllum Resin is the powdered mixture of resins removed from the May apple or Mandrake (Podophyllum peltatum Linne’), a perennial plant of northern and middle United States(1). The podophyllin resin used in this product is exclusively the American podophyllin (rather than the Indian resin). American podophyllin typically has a reduced level of podophyllotoxin (see below).</Description>
</NDC>
<NDC>
<NDCCode>72162-1119-2</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (72162-1119-2) / 1 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>72162-1119-02</NDC11Code>
<ProductNDC>72162-1119</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Testosterone Cypionate</ProprietaryName>
<NonProprietaryName>Testosterone Cypionate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20140501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091244</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>TESTOSTERONE CYPIONATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Androgen Receptor Agonists [MoA], Androgen [EPC], Androstanes [CS]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-07-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Testosterone Cypionate Injection, USP is indicated for replacement therapy in the male in conditions associated with symptoms of deficiency, or absence of endogenous testosterone. : 1 1.Primary hypogonadism (congenital or acquired): testicular failure due to cryptorchidism, bilateral torsion, orchitis, vanishing testis syndrome; or orchidectomy., 2 2.Hypogonadotropic hypogonadism (congenital or acquired): gonadotropin or luteinizing hormone-releasing hormone (LHRH) deficiency, or pituitary-hypothalamic injury from tumors, trauma, or radiation.</IndicationAndUsage>
<Description>Testosterone Cypionate Injection, USP for intramuscular injection, contains Testosterone Cypionate, USP which is the oil-soluble 17 (beta)-cyclopentylpropionate ester of the androgenic hormone testosterone. Testosterone Cypionate, USP is a white or creamy white crystalline powder, odorless or nearly so and stable in air. It is insoluble in water, freely soluble in alcohol, chloroform, dioxane, ether, and soluble in vegetable oils. The chemical name for Testosterone Cypionate, USP is androst-4-en-3-one,17-(3-cyclopentyl-1- oxopropoxy)-, (17ß)-. Its molecular formula is C27H40O3, and the molecular weight 412.61. The structural formula is represented below. Testosterone Cypionate Injection, USP is available in one strength, 200 mg/mL Testosterone Cypionate, USP. Each mL of the 200 mg/mL solution contains: 1 Testosterone Cypionate, USP 200 mg, 2 Benzyl Benzoate, USP 0.2 mL, 3 Cottonseed Oil, USP 560 mg, 4 Benzyl Alcohol, USP (as preservative) 9.45 mg.</Description>
</NDC>
<NDC>
<NDCCode>72162-1123-2</NDCCode>
<PackageDescription>118 mL in 1 BOTTLE, PLASTIC (72162-1123-2) </PackageDescription>
<NDC11Code>72162-1123-02</NDC11Code>
<ProductNDC>72162-1123</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Brompheniramine Maleate, Pseudoephedrine Hydrochloride And Dextromethorphan Hydrobromide</ProprietaryName>
<NonProprietaryName>Brompheniramine Maleate, Pseudoephedrine Hydrochloride And Dextromethorphan Hydrobromide</NonProprietaryName>
<DosageFormName>SYRUP</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205292</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>BROMPHENIRAMINE MALEATE; PSEUDOEPHEDRINE HYDROCHLORIDE; DEXTROMETHORPHAN HYDROBROMIDE</SubstanceName>
<StrengthNumber>2; 30; 10</StrengthNumber>
<StrengthUnit>mg/5mL; mg/5mL; mg/5mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230816</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For relief of coughs and upper respiratory symptoms, including nasal congestion, associated with allergy or the common cold.</IndicationAndUsage>
<Description>Brompheniramine Maleate, Pseudoephedrine Hydrochloride and Dextromethorphan Hydrobromide Syrup is a clear, light pink syrup with a butterscotch flavor. Each 5 mL (1 teaspoonful) contains. Brompheniramine Maleate, USP ................. 2 mg. Pseudoephedrine Hydrochloride, USP ........ 30 mg. Dextromethorphan Hydrobromide, USP ...... 10 mg. Alcohol 0.95% v/v. In a palatable, aromatic vehicle. Inactive Ingredients: alcohol, artificial butterscotch flavor, citric acid anhydrous, glycerin, methylparaben, propylene glycol, purified water, sodium benzoate, sodium citrate, sucrose, and FD&C Red No. 40. It may contain 10% citric acid solution or 10% sodium citrate solution for pH adjustment. The pH range is between 3.0 and 6.0. Antihistamine/Nasal Decongestant/Antitussive syrup for oral administration.</Description>
</NDC>
<NDC>
<NDCCode>72162-1124-2</NDCCode>
<PackageDescription>15 g in 1 BOTTLE, PLASTIC (72162-1124-2) </PackageDescription>
<NDC11Code>72162-1124-02</NDC11Code>
<ProductNDC>72162-1124</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nystop</ProprietaryName>
<NonProprietaryName>Nystatin</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19960816</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA064118</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>NYSTATIN</SubstanceName>
<StrengthNumber>100000</StrengthNumber>
<StrengthUnit>[USP'U]/g</StrengthUnit>
<Pharm_Classes>Polyene Antifungal [EPC], Polyenes [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nystatin Topical Powder is indicated in the treatment of cutaneous or mucocutaneous mycotic infections caused by Candida albicans and other susceptible Candida species. This preparation is not indicated for systemic, oral, intravaginal or ophthalmic use.</IndicationAndUsage>
<Description>Nystatin is a polyene antifungal antibiotic obtained from Streptomyces nursei. The molecular formula for Nystatin is C47H75NO17. The molecular weight of Nystatin is 926.1. Structural formula. Nystatin Topical Powder USP is for dermatologic use. Nystatin Topical Powder USP contains 100,000 USP nystatin units per gram dispersed in talc.</Description>
</NDC>
<NDC>
<NDCCode>72162-1126-2</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (72162-1126-2) / 45 g in 1 TUBE</PackageDescription>
<NDC11Code>72162-1126-02</NDC11Code>
<ProductNDC>72162-1126</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ciclopirox</ProprietaryName>
<NonProprietaryName>Ciclopirox</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20090107</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078266</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>CICLOPIROX</SubstanceName>
<StrengthNumber>7.7</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Decreased DNA Replication [PE], Decreased Protein Synthesis [PE], Decreased RNA Replication [PE], Protein Synthesis Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240311</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Superficial Dermatophyte Infections. Ciclopirox Gel, 0.77% is indicated for the topical treatment of interdigital tinea pedis and tinea corporis due to Trichophyton rubrum, Trichophyton mentagrophytes, or Epidermophyton floccosum. Seborrheic Dermatitis. Ciclopirox Gel, 0.77% is indicated for the topical treatment of seborrheic dermatitis of the scalp.</IndicationAndUsage>
<Description>Ciclopirox Gel, 0.77% contains a synthetic antifungal agent, ciclopirox. It is intended for topical dermatologic use only. Each gram of Ciclopirox Gel, 0.77% contains 7.70 mg of ciclopirox in a gel consisting of Purified Water USP, Isopropyl Alcohol USP, Octyldodecanol NF, Dimethicone Copolyol 190, Carbomer 980, Sodium Hydroxide NF, and Docusate Sodium USP. Ciclopirox Gel, 0.77% is a white, slightly fluid gel. The chemical name for ciclopirox is 6-cyclohexyl-1-hydroxy-4-methyl-2(1H)- pyridinone, with the empirical formula C12H17NO2 and a molecular weight of 207.27. The CAS Registry Number is [29342-05-0]. The chemical structure is.</Description>
</NDC>
<NDC>
<NDCCode>72162-1128-2</NDCCode>
<PackageDescription>10 mL in 1 BOTTLE, PLASTIC (72162-1128-2) </PackageDescription>
<NDC11Code>72162-1128-02</NDC11Code>
<ProductNDC>72162-1128</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tobramycin And Dexamethasone</ProprietaryName>
<NonProprietaryName>Tobramycin And Dexamethasone</NonProprietaryName>
<DosageFormName>SUSPENSION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20220317</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212715</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>TOBRAMYCIN; DEXAMETHASONE</SubstanceName>
<StrengthNumber>3; 1</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>INDICATIONS AND USAGE: Tobramycin and dexamethasone ophthalmic suspension is indicated for steroid-responsive inflammatory ocular conditions for which a corticosteroid is indicated and where superficial bacterial ocular infection or a risk of bacterial ocular infection exists. Ocular steroids are indicated in inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe where the inherent risk of steroid use in certain infective conjunctivitides is accepted to obtain a diminution in edema and inflammation. They are also indicated in chronic anterior uveitis and corneal injury from chemical, radiation or thermal burns, or penetration of foreign bodies. The use of a combination drug with an anti-infective component is indicated where the risk of superficial ocular infection is high or where there is an expectation that potentially dangerous numbers of bacteria will be present in the eye. The particular anti-infective drug in this product is active against the following common bacterial eye pathogens. Staphylococci, including S. aureus and S. epidermidis (coagulase-positive and coagulase-negative), including penicillin-resistant strains. Streptococci, including some of the Group A-beta-hemolytic species, some nonhemolytic species, and some Streptococcus pneumoniae. Pseudomonas aeruginosa, Escherichia coli, Klebsiella pneumoniae, Enterobacter aerogenes, Proteus mirabilis, Morganella morganii, most Proteus vulgaris strains, Haemophilus influenzae and H. aegyptius, Moraxella lacunata, Acinetobacter calcoaceticus and some Neisseria species.</IndicationAndUsage>
<Description>DESCRIPTION: Tobramycin and dexamethasone ophthalmic suspension USP is a sterile, multiple dose antibiotic and steroid combination for topical ophthalmic use with a pH of approximately 5.5 and an osmolality of approximately 300 mOsm/kg. The chemical structures for tobramycin and dexamethasone are presented below. Tobramycin. Empirical Formula: C18H37N5O9. Chemical Name: O-3-Amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine. MW: 467.52. Dexamethasone. Empirical Formula: C22H29FO5. Chemical Name: 9-Fluoro-11β,17,21-trihydroxy-16α-methylpregna-1,4-diene-3,20-dione. MW: 392.47. Each mL of Tobramycin and dexamethasone ophthalmic suspension contains: Actives: tobramycin 0.3% (3 mg) and dexamethasone 0.1% (1 mg). Preservative: benzalkonium chloride 0.01%. Inactives: edetate disodium dihydrate, hydroxyethyl cellulose, sodium chloride, sodium sulfate anhydrous, sulfuric acid and/or sodium hydroxide (to adjust pH), tyloxapol, and water for injection.</Description>
</NDC>
<NDC>
<NDCCode>72162-1128-7</NDCCode>
<PackageDescription>2.5 mL in 1 BOTTLE, PLASTIC (72162-1128-7) </PackageDescription>
<NDC11Code>72162-1128-07</NDC11Code>
<ProductNDC>72162-1128</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tobramycin And Dexamethasone</ProprietaryName>
<NonProprietaryName>Tobramycin And Dexamethasone</NonProprietaryName>
<DosageFormName>SUSPENSION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20220317</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212715</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>TOBRAMYCIN; DEXAMETHASONE</SubstanceName>
<StrengthNumber>3; 1</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>INDICATIONS AND USAGE: Tobramycin and dexamethasone ophthalmic suspension is indicated for steroid-responsive inflammatory ocular conditions for which a corticosteroid is indicated and where superficial bacterial ocular infection or a risk of bacterial ocular infection exists. Ocular steroids are indicated in inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe where the inherent risk of steroid use in certain infective conjunctivitides is accepted to obtain a diminution in edema and inflammation. They are also indicated in chronic anterior uveitis and corneal injury from chemical, radiation or thermal burns, or penetration of foreign bodies. The use of a combination drug with an anti-infective component is indicated where the risk of superficial ocular infection is high or where there is an expectation that potentially dangerous numbers of bacteria will be present in the eye. The particular anti-infective drug in this product is active against the following common bacterial eye pathogens. Staphylococci, including S. aureus and S. epidermidis (coagulase-positive and coagulase-negative), including penicillin-resistant strains. Streptococci, including some of the Group A-beta-hemolytic species, some nonhemolytic species, and some Streptococcus pneumoniae. Pseudomonas aeruginosa, Escherichia coli, Klebsiella pneumoniae, Enterobacter aerogenes, Proteus mirabilis, Morganella morganii, most Proteus vulgaris strains, Haemophilus influenzae and H. aegyptius, Moraxella lacunata, Acinetobacter calcoaceticus and some Neisseria species.</IndicationAndUsage>
<Description>DESCRIPTION: Tobramycin and dexamethasone ophthalmic suspension USP is a sterile, multiple dose antibiotic and steroid combination for topical ophthalmic use with a pH of approximately 5.5 and an osmolality of approximately 300 mOsm/kg. The chemical structures for tobramycin and dexamethasone are presented below. Tobramycin. Empirical Formula: C18H37N5O9. Chemical Name: O-3-Amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine. MW: 467.52. Dexamethasone. Empirical Formula: C22H29FO5. Chemical Name: 9-Fluoro-11β,17,21-trihydroxy-16α-methylpregna-1,4-diene-3,20-dione. MW: 392.47. Each mL of Tobramycin and dexamethasone ophthalmic suspension contains: Actives: tobramycin 0.3% (3 mg) and dexamethasone 0.1% (1 mg). Preservative: benzalkonium chloride 0.01%. Inactives: edetate disodium dihydrate, hydroxyethyl cellulose, sodium chloride, sodium sulfate anhydrous, sulfuric acid and/or sodium hydroxide (to adjust pH), tyloxapol, and water for injection.</Description>
</NDC>
</NDCList>