RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>72162-1691-0</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE (72162-1691-0) </PackageDescription>
    <NDC11Code>72162-1691-00</NDC11Code>
    <ProductNDC>72162-1691</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Prednisone</ProprietaryName>
    <NonProprietaryName>Prednisone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20050606</StartMarketingDate>
    <EndMarketingDate>20260501</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040611</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>PREDNISONE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-05-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20240207</StartMarketingDatePackage>
    <EndMarketingDatePackage>20260501</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Prednisone tablets are indicated in the following conditions. 1. Endocrine Disorders:. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance). Congenital adrenal hyperplasia. Nonsuppurative thyroiditis. Hypercalcemia associated with cancer. 2. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in:. Psoriatic arthritis. Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). Ankylosing spondylitis. Acute and subacute bursitis. Acute nonspecific tenosynovitis. Acute gouty arthritis. Post-traumatic osteoarthritis. Synovitis of osteoarthritis. Epicondylitis. 3. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of:. Systemic lupus erythematosus. Systemic dermatomyositis (polymyositis). Acute rheumatic carditis. 4. Dermatologic Diseases. Pemphigus. Bullous dermatitis herpetiformis. Severe erythema multiforme (Stevens-Johnson syndrome). Exfoliative dermatitis. Mycosis fungoides. Severe psoriasis. Severe seborrheic dermatitis. 5. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment:. Seasonal or perennial allergic rhinitis. Bronchial asthma. Contact dermatitis. Atopic dermatitis. Serum sickness. Drug hypersensitivity reactions. 6. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as. Allergic corneal marginal ulcers. Herpes zoster ophthalmicus. Anterior segment inflammation. Diffuse posterior uveitis and choroiditis. Sympathetic ophthalmia. Allergic conjunctivitis. Keratitis. Chorioretinitis. Optic neuritis. Iritis and iridocyclitis. 7. Respiratory Diseases. Symptomatic sarcoidosis. Loeffler's syndrome not manageable by other means. Berylliosis. Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy. Aspiration pneumonitis. 8. Hematologic Disorders. Idiopathic thrombocytopenic purpura in adults. Secondary thrombocytopenia in adults. Acquired (autoimmune) hemolytic anemia. Erythroblastopenia (RBC anemia). Congenital (erythroid) hypoplastic anemia. 9. Neoplastic Diseases. For palliative management of:. Leukemias and lymphomas in adults. Acute leukemia of childhood. 10. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 11. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in:. Ulcerative colitis. Regional enteritis. 12. Nervous System. Acute exacerbations of multiple sclerosis. 13. Miscellaneous. Tuberculous meningitis with subarachnoid block or, impending block when used concurrently with appropriate antituberculous chemotherapy. Trichinosis with neurologic or myocardial involvement.</IndicationAndUsage>
    <Description>Prednisone is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The molecular formula for prednisone is C21H26O5. Chemically, it is 17,21-dihydroxypregna-1,4-diene-3,11,20-trione and has the following structural formula. Molecular weight: 358.44. Prednisone is a white to practically white, odorless, crystalline powder. It melts at about 230°C with some decomposition. Prednisone is very slightly soluble in water; slightly soluble in alcohol, in chloroform, in dioxane, and in methanol. Each tablet, for oral administration, contains 1 mg of prednisone. Inactive Ingredients: Lactose, Magnesium Stearate, Pregelatinized Starch, Sodium Lauryl Sulfate and Sodium Starch Glycolate.</Description>
  </NDC>
  <NDC>
    <NDCCode>50090-1691-0</NDCCode>
    <PackageDescription>30 TABLET in 1 BOTTLE (50090-1691-0) </PackageDescription>
    <NDC11Code>50090-1691-00</NDC11Code>
    <ProductNDC>50090-1691</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Buspirone Hcl</ProprietaryName>
    <NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20010328</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074253</ApplicationNumber>
    <LabelerName>A-S Medication Solutions</LabelerName>
    <SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2020-01-01</LastUpdate>
    <PackageNdcExcludeFlag>Y</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, lll1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge”, irritability, impatience.</IndicationAndUsage>
    <Description>Buspirone hydrochloride is an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]-butyl]-8-azaspiro[4.5]decane-7,9- dione monohydrochloride. The empirical formula C21H31N5O2  HCl is represented by the following structural formula. Each tablet for oral administration containing 5 mg, 10 mg, or 15 mg of buspirone hydrochloride USP (equivalent to 4.6 mg, 9.1 mg, and 13.7 mg of buspirone free base respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablet is provided in a special tablet design. This tablet is scored so it can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate.</Description>
  </NDC>
  <NDC>
    <NDCCode>54868-1691-0</NDCCode>
    <PackageDescription>120 TABLET in 1 BOTTLE (54868-1691-0)</PackageDescription>
    <NDC11Code>54868-1691-00</NDC11Code>
    <ProductNDC>54868-1691</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Primidone</ProprietaryName>
    <NonProprietaryName>Primidone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20090727</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA084903</ApplicationNumber>
    <LabelerName>Physicians Total Care, Inc.</LabelerName>
    <SubstanceName>PRIMIDONE</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-07-24</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Primidone, used alone or concomitantly with other anticonvulsants, is indicated in the control of grand mal, psychomotor, and focal epileptic seizures. It may control grand mal seizures refractory to other anticonvulsant therapy.</IndicationAndUsage>
    <Description>Anticonvulsant. Chemical name: 5-ethyldihydro-5-phenyl-4,6 (1H,5H)-pyrimidinedione. Structural formula. Primidone is a white, crystalline, highly stable substance, M.P. 279 -284°C. It is poorly soluble in water (60 mg per 100 mL at 37°C) and in most organic solvents. It possesses no acidic properties, in contrast to its barbiturate analog. Each tablet, for oral administration, contains either 50 mg or 250 mg of primidone. In addition, each tablet contains the following inactive ingredients: lactose monohydrate, acacia, methylcellulose, magnesium stearate, and sodium starch glycolate.</Description>
  </NDC>
  <NDC>
    <NDCCode>70518-1691-0</NDCCode>
    <PackageDescription>60 TABLET in 1 BLISTER PACK (70518-1691-0) </PackageDescription>
    <NDC11Code>70518-1691-00</NDC11Code>
    <ProductNDC>70518-1691</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Benztropine Mesylate</ProprietaryName>
    <NonProprietaryName>Benztropine Mesylate</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20181126</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204713</ApplicationNumber>
    <LabelerName>REMEDYREPACK INC.</LabelerName>
    <SubstanceName>BENZTROPINE MESYLATE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC],Antihistamine [EPC],Cholinergic Antagonists [MoA],Histamine Receptor Antagonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2020-05-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20181126</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>71335-1691-0</NDCCode>
    <PackageDescription>45 CAPSULE in 1 BOTTLE (71335-1691-0) </PackageDescription>
    <NDC11Code>71335-1691-00</NDC11Code>
    <ProductNDC>71335-1691</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ergocalciferol</ProprietaryName>
    <NonProprietaryName>Ergocalciferol Capsules,</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20181210</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204276</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>ERGOCALCIFEROL</SubstanceName>
    <StrengthNumber>1.25</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Ergocalciferols [CS], Provitamin D2 Compound [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200820</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ergocalciferol Capsules are indicated for use in the treatment of hypoparathyroidism, refractory rickets, also known as vitamin D resistant rickets, and familial hypophosphatemia.</IndicationAndUsage>
    <Description>Ergocalciferol Capsules, USP is a synthetic calcium regulator for oral administration. Ergocalciferol is a white, colorless crystal, insoluble in water, soluble in organic solvents, and slightly soluble in vegetable oils. It is affected by air and by light. Ergosterol or provitamin D2 is found in plants and yeast and has no antirachitic activity. There are more than 10 substances belonging to a group of steroid compounds, classified as having vitamin D or antirachitic activity. One USP unit of vitamin D2 is equivalent to one International Unit (IU), and 1 mcg of vitamin D2 is equal to 40 IU. Each capsule contains 1.25 mg (50,000 International Units vitamin D) of ergocalciferol, USP, in an edible vegetable oil. Ergocalciferol, also called vitamin D2, is 9, 10-secoergosta-5, 7, 10(19), 22-tetraen-3-ol, (3ß, 5Z, 7E, 22E)-; (C28H44O) with a molecular weight of 396.65, and has the following structural formula. Inactive Ingredients: Butylated hydroxytoluene, D&amp;C Yellow #10, FD&amp;C Blue #1, Gelatin, Glycerin, Propylene Glycol, Shellac, Simethicone, Soybean oil and Titanium Dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>22840-1691-2</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (22840-1691-2) </PackageDescription>
    <NDC11Code>22840-1691-02</NDC11Code>
    <ProductNDC>22840-1691</ProductNDC>
    <ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Helminthosporium Solani</ProprietaryName>
    <NonProprietaryName>Helminthosporium Solani</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19810915</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101833</ApplicationNumber>
    <LabelerName>Greer Laboratories, Inc.</LabelerName>
    <SubstanceName>HELMINTHOSPORIUM SOLANI</SubstanceName>
    <StrengthNumber>40000</StrengthNumber>
    <StrengthUnit>[PNU]/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Fungal Proteins [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19810915</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Allergenic Extracts are indicated for the diagnosis and treatment of patients with immediate hypersensitivity allergy to the respective allergens, inhaled, ingested or otherwise introduced into contact with sensitive tissues. The diagnosis of IgE‑mediated allergy may be established by the allergy history, clinical evaluation, and skin test reactivity. (4,7,11) Immunotherapy with Allergenic Extracts is indicated when testing and patient history have identified the offending allergens and when it is not possible or practical to avoid these allergens. (12‑14) Food extracts have not been proven effective in immunotherapy. The use of Allergenic Extracts for the above purposes should be made only by physicians with special familiarity and knowledge of allergy. (See DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
    <Description>Allergenic Extracts are supplied as a sterile solution for intracutaneous or subcutaneous administration. Concentrates contain the soluble extractants of the source material with 0.5% sodium chloride and 0.54% sodium bicarbonate at a pH of 6.8 to 8.4 as aqueous extracts in water for injection or in 50% glycerin. Aqueous extracts contain 0.4% phenol as a preservative and 50% glycerinated extracts contain 0.2% phenol. Diluted aqueous extracts contain Buffered Saline with 0.5% sodium chloride, 0.04% potassium phosphate, 0.11% sodium phosphate heptahydrate, and 0.4% phenol in water for injection. Source materials for these extracts are as follows: Pollens are collected from the respective grasses, weeds, trees, shrubs, cultured plants and flowers. Mold extracts are produced from pure culture mycelial mats. Rusts and smuts are obtained from natural growths. Epidermal extracts are produced from the hide, hair, or feathers containing the natural dander, or from separated dander. Insects are the whole body insects. House dust is made from various dusts ordinarily found in the home with the extract dialyzed to remove low‑molecular weight irritants and concentrated to an extraction ratio of 1:1. Food extracts are prepared from the edible portions of the respective foods, obtained fresh if possible. Certain diagnostic food extracts contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Other miscellaneous inhalants involved in respiratory allergy are obtained in the naturally occurring form to which a patient may be exposed. Extracts are labeled either by weight‑to‑volume (w/v) based on the weight of the source material to the volume of the extracting fluid, or in protein nitrogen units (PNU) based on assay with one PNU representing 0.00001 mg of protein nitrogen.</Description>
  </NDC>
  <NDC>
    <NDCCode>22840-1691-4</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-1691-4) </PackageDescription>
    <NDC11Code>22840-1691-04</NDC11Code>
    <ProductNDC>22840-1691</ProductNDC>
    <ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Helminthosporium Solani</ProprietaryName>
    <NonProprietaryName>Helminthosporium Solani</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19810915</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101833</ApplicationNumber>
    <LabelerName>Greer Laboratories, Inc.</LabelerName>
    <SubstanceName>HELMINTHOSPORIUM SOLANI</SubstanceName>
    <StrengthNumber>40000</StrengthNumber>
    <StrengthUnit>[PNU]/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Fungal Proteins [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19810915</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Allergenic Extracts are indicated for the diagnosis and treatment of patients with immediate hypersensitivity allergy to the respective allergens, inhaled, ingested or otherwise introduced into contact with sensitive tissues. The diagnosis of IgE‑mediated allergy may be established by the allergy history, clinical evaluation, and skin test reactivity. (4,7,11) Immunotherapy with Allergenic Extracts is indicated when testing and patient history have identified the offending allergens and when it is not possible or practical to avoid these allergens. (12‑14) Food extracts have not been proven effective in immunotherapy. The use of Allergenic Extracts for the above purposes should be made only by physicians with special familiarity and knowledge of allergy. (See DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
    <Description>Allergenic Extracts are supplied as a sterile solution for intracutaneous or subcutaneous administration. Concentrates contain the soluble extractants of the source material with 0.5% sodium chloride and 0.54% sodium bicarbonate at a pH of 6.8 to 8.4 as aqueous extracts in water for injection or in 50% glycerin. Aqueous extracts contain 0.4% phenol as a preservative and 50% glycerinated extracts contain 0.2% phenol. Diluted aqueous extracts contain Buffered Saline with 0.5% sodium chloride, 0.04% potassium phosphate, 0.11% sodium phosphate heptahydrate, and 0.4% phenol in water for injection. Source materials for these extracts are as follows: Pollens are collected from the respective grasses, weeds, trees, shrubs, cultured plants and flowers. Mold extracts are produced from pure culture mycelial mats. Rusts and smuts are obtained from natural growths. Epidermal extracts are produced from the hide, hair, or feathers containing the natural dander, or from separated dander. Insects are the whole body insects. House dust is made from various dusts ordinarily found in the home with the extract dialyzed to remove low‑molecular weight irritants and concentrated to an extraction ratio of 1:1. Food extracts are prepared from the edible portions of the respective foods, obtained fresh if possible. Certain diagnostic food extracts contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Other miscellaneous inhalants involved in respiratory allergy are obtained in the naturally occurring form to which a patient may be exposed. Extracts are labeled either by weight‑to‑volume (w/v) based on the weight of the source material to the volume of the extracting fluid, or in protein nitrogen units (PNU) based on assay with one PNU representing 0.00001 mg of protein nitrogen.</Description>
  </NDC>
  <NDC>
    <NDCCode>36987-1691-1</NDCCode>
    <PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (36987-1691-1)</PackageDescription>
    <NDC11Code>36987-1691-01</NDC11Code>
    <ProductNDC>36987-1691</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Garlic</ProprietaryName>
    <NonProprietaryName>Garlic</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19720829</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102192</ApplicationNumber>
    <LabelerName>Nelco Laboratories, Inc.</LabelerName>
    <SubstanceName>GARLIC</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Plant Proteins [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
    <Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
  </NDC>
  <NDC>
    <NDCCode>36987-1691-2</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (36987-1691-2)</PackageDescription>
    <NDC11Code>36987-1691-02</NDC11Code>
    <ProductNDC>36987-1691</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Garlic</ProprietaryName>
    <NonProprietaryName>Garlic</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19720829</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102192</ApplicationNumber>
    <LabelerName>Nelco Laboratories, Inc.</LabelerName>
    <SubstanceName>GARLIC</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Plant Proteins [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
    <Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
  </NDC>
  <NDC>
    <NDCCode>36987-1691-3</NDCCode>
    <PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (36987-1691-3)</PackageDescription>
    <NDC11Code>36987-1691-03</NDC11Code>
    <ProductNDC>36987-1691</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Garlic</ProprietaryName>
    <NonProprietaryName>Garlic</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19720829</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102192</ApplicationNumber>
    <LabelerName>Nelco Laboratories, Inc.</LabelerName>
    <SubstanceName>GARLIC</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Plant Proteins [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
    <Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
  </NDC>
  <NDC>
    <NDCCode>36987-1691-4</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (36987-1691-4)</PackageDescription>
    <NDC11Code>36987-1691-04</NDC11Code>
    <ProductNDC>36987-1691</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Garlic</ProprietaryName>
    <NonProprietaryName>Garlic</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19720829</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102192</ApplicationNumber>
    <LabelerName>Nelco Laboratories, Inc.</LabelerName>
    <SubstanceName>GARLIC</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Plant Proteins [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
    <Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
  </NDC>
  <NDC>
    <NDCCode>50090-1691-1</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE (50090-1691-1) </PackageDescription>
    <NDC11Code>50090-1691-01</NDC11Code>
    <ProductNDC>50090-1691</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Buspirone Hcl</ProprietaryName>
    <NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20010328</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074253</ApplicationNumber>
    <LabelerName>A-S Medication Solutions</LabelerName>
    <SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2020-01-01</LastUpdate>
    <PackageNdcExcludeFlag>Y</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, lll1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge”, irritability, impatience.</IndicationAndUsage>
    <Description>Buspirone hydrochloride is an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]-butyl]-8-azaspiro[4.5]decane-7,9- dione monohydrochloride. The empirical formula C21H31N5O2  HCl is represented by the following structural formula. Each tablet for oral administration containing 5 mg, 10 mg, or 15 mg of buspirone hydrochloride USP (equivalent to 4.6 mg, 9.1 mg, and 13.7 mg of buspirone free base respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablet is provided in a special tablet design. This tablet is scored so it can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate.</Description>
  </NDC>
  <NDC>
    <NDCCode>50090-1691-3</NDCCode>
    <PackageDescription>180 TABLET in 1 BOTTLE (50090-1691-3) </PackageDescription>
    <NDC11Code>50090-1691-03</NDC11Code>
    <ProductNDC>50090-1691</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Buspirone Hcl</ProprietaryName>
    <NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20010328</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074253</ApplicationNumber>
    <LabelerName>A-S Medication Solutions</LabelerName>
    <SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2020-01-01</LastUpdate>
    <PackageNdcExcludeFlag>Y</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, lll1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge”, irritability, impatience.</IndicationAndUsage>
    <Description>Buspirone hydrochloride is an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]-butyl]-8-azaspiro[4.5]decane-7,9- dione monohydrochloride. The empirical formula C21H31N5O2  HCl is represented by the following structural formula. Each tablet for oral administration containing 5 mg, 10 mg, or 15 mg of buspirone hydrochloride USP (equivalent to 4.6 mg, 9.1 mg, and 13.7 mg of buspirone free base respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablet is provided in a special tablet design. This tablet is scored so it can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate.</Description>
  </NDC>
  <NDC>
    <NDCCode>50090-1691-4</NDCCode>
    <PackageDescription>45 TABLET in 1 BOTTLE (50090-1691-4) </PackageDescription>
    <NDC11Code>50090-1691-04</NDC11Code>
    <ProductNDC>50090-1691</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Buspirone Hcl</ProprietaryName>
    <NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20010328</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074253</ApplicationNumber>
    <LabelerName>A-S Medication Solutions</LabelerName>
    <SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2020-01-01</LastUpdate>
    <PackageNdcExcludeFlag>Y</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, lll1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge”, irritability, impatience.</IndicationAndUsage>
    <Description>Buspirone hydrochloride is an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]-butyl]-8-azaspiro[4.5]decane-7,9- dione monohydrochloride. The empirical formula C21H31N5O2  HCl is represented by the following structural formula. Each tablet for oral administration containing 5 mg, 10 mg, or 15 mg of buspirone hydrochloride USP (equivalent to 4.6 mg, 9.1 mg, and 13.7 mg of buspirone free base respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablet is provided in a special tablet design. This tablet is scored so it can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate.</Description>
  </NDC>
  <NDC>
    <NDCCode>50090-1691-5</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (50090-1691-5) </PackageDescription>
    <NDC11Code>50090-1691-05</NDC11Code>
    <ProductNDC>50090-1691</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Buspirone Hcl</ProprietaryName>
    <NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20010328</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074253</ApplicationNumber>
    <LabelerName>A-S Medication Solutions</LabelerName>
    <SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2020-01-01</LastUpdate>
    <PackageNdcExcludeFlag>Y</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, lll1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge”, irritability, impatience.</IndicationAndUsage>
    <Description>Buspirone hydrochloride is an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]-butyl]-8-azaspiro[4.5]decane-7,9- dione monohydrochloride. The empirical formula C21H31N5O2  HCl is represented by the following structural formula. Each tablet for oral administration containing 5 mg, 10 mg, or 15 mg of buspirone hydrochloride USP (equivalent to 4.6 mg, 9.1 mg, and 13.7 mg of buspirone free base respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablet is provided in a special tablet design. This tablet is scored so it can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate.</Description>
  </NDC>
  <NDC>
    <NDCCode>70518-1691-3</NDCCode>
    <PackageDescription>100 POUCH in 1 BOX (70518-1691-3)  / 1 TABLET in 1 POUCH (70518-1691-4) </PackageDescription>
    <NDC11Code>70518-1691-03</NDC11Code>
    <ProductNDC>70518-1691</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Benztropine Mesylate</ProprietaryName>
    <NonProprietaryName>Benztropine Mesylate</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20181126</StartMarketingDate>
    <EndMarketingDate>20240531</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204713</ApplicationNumber>
    <LabelerName>REMEDYREPACK INC.</LabelerName>
    <SubstanceName>BENZTROPINE MESYLATE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC], Antihistamine [EPC], Cholinergic Antagonists [MoA], Histamine Receptor Antagonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-06-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20220317</StartMarketingDatePackage>
    <EndMarketingDatePackage>20240531</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Benztropine mesylate tablets USP are indicated for use as an adjunct in the therapy of all forms of parkinsonism. Useful also in the control of extrapyramidal disorders (except tardive dyskinesia – see PRECAUTIONS) due to neuroleptic drugs (e.g., phenothiazines).</IndicationAndUsage>
    <Description>Benztropine mesylate is a synthetic compound containing structural features found in atropine and diphenhydramine. It is designated chemically as 3α-(Diphenylmethoxy)-1αH, 5αH-tropane methanesulfonate. Its molecular formula is C 21H 25NOCH 4O 3S, and its structural formula is:. Benztropine mesylate is a crystalline white powder, very soluble in water, and has a molecular weight of 403.54. Each benztropine mesylate tablet USP for oral administration contains benztropine mesylate USP 0.5 mg, 1 mg or 2 mg. Inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch.</Description>
  </NDC>
  <NDC>
    <NDCCode>80830-1691-2</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (80830-1691-2)  / 15 mL in 1 VIAL, SINGLE-DOSE (80830-1691-1) </PackageDescription>
    <NDC11Code>80830-1691-02</NDC11Code>
    <ProductNDC>80830-1691</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Potassium Phosphates</ProprietaryName>
    <NonProprietaryName>Potassium Phosphate, Monobasic Potassium Phosphate, Dibasic Injection,</NonProprietaryName>
    <DosageFormName>SOLUTION, CONCENTRATE</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20231023</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216344</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
    <SubstanceName>POTASSIUM PHOSPHATE, MONOBASIC; POTASSIUM PHOSPHATE, DIBASIC</SubstanceName>
    <StrengthNumber>224; 236</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-01-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231023</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Potassium phosphates injection is indicated as a source of phosphorus: : 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated. , 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated. .</IndicationAndUsage>
    <Description>Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile clear, colorless, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate, USP and dibasic potassium phosphate, USP in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial. Monobasic potassium phosphate, USP is chemically designated potassium dihydrogen phosphate. The molecular formula is KH2PO4, molecular weight is 136.084 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water and practically insoluble in alcohol. Dibasic potassium phosphate, USP is chemically designated dipotassium hydrogen phosphate. The molecular formula is K2HPO4, molecular weight is 174.18 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water. Each mL of Potassium Phosphates Injection, USP contains monobasic potassium phosphate USP, 224 mg; dibasic potassium phosphate USP, 236 mg and water for injection. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route.</Description>
  </NDC>
  <NDC>
    <NDCCode>80830-1691-5</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (80830-1691-5)  / 15 mL in 1 VIAL, SINGLE-DOSE (80830-1691-1) </PackageDescription>
    <NDC11Code>80830-1691-05</NDC11Code>
    <ProductNDC>80830-1691</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Potassium Phosphates</ProprietaryName>
    <NonProprietaryName>Potassium Phosphate, Monobasic Potassium Phosphate, Dibasic Injection,</NonProprietaryName>
    <DosageFormName>SOLUTION, CONCENTRATE</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20231023</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216344</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
    <SubstanceName>POTASSIUM PHOSPHATE, MONOBASIC; POTASSIUM PHOSPHATE, DIBASIC</SubstanceName>
    <StrengthNumber>224; 236</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-01-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231023</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Potassium phosphates injection is indicated as a source of phosphorus: : 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated. , 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated. .</IndicationAndUsage>
    <Description>Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile clear, colorless, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate, USP and dibasic potassium phosphate, USP in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial. Monobasic potassium phosphate, USP is chemically designated potassium dihydrogen phosphate. The molecular formula is KH2PO4, molecular weight is 136.084 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water and practically insoluble in alcohol. Dibasic potassium phosphate, USP is chemically designated dipotassium hydrogen phosphate. The molecular formula is K2HPO4, molecular weight is 174.18 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water. Each mL of Potassium Phosphates Injection, USP contains monobasic potassium phosphate USP, 224 mg; dibasic potassium phosphate USP, 236 mg and water for injection. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route.</Description>
  </NDC>
  <NDC>
    <NDCCode>80830-1691-7</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (80830-1691-7)  / 15 mL in 1 VIAL, SINGLE-DOSE (80830-1691-6) </PackageDescription>
    <NDC11Code>80830-1691-07</NDC11Code>
    <ProductNDC>80830-1691</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Potassium Phosphates</ProprietaryName>
    <NonProprietaryName>Potassium Phosphate, Monobasic Potassium Phosphate, Dibasic Injection,</NonProprietaryName>
    <DosageFormName>SOLUTION, CONCENTRATE</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20250709</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216344</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
    <SubstanceName>POTASSIUM PHOSPHATE, MONOBASIC; POTASSIUM PHOSPHATE, DIBASIC</SubstanceName>
    <StrengthNumber>224; 236</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250709</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Potassium phosphates injection is indicated as a source of phosphorus: : 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated. , 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated. .</IndicationAndUsage>
    <Description>Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile clear, colorless, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate, USP and dibasic potassium phosphate, USP in water for injection. It is supplied as a 15 mL single-dose vial. Monobasic potassium phosphate, USP is chemically designated potassium dihydrogen phosphate. The molecular formula is KH2PO4, molecular weight is 136.084 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water and practically insoluble in alcohol. Dibasic potassium phosphate, USP is chemically designated dipotassium hydrogen phosphate. The molecular formula is K2HPO4, molecular weight is 174.18 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water. Each mL of Potassium Phosphates Injection, USP contains monobasic potassium phosphate USP, 224 mg; dibasic potassium phosphate USP, 236 mg and water for injection. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route.</Description>
  </NDC>
  <NDC>
    <NDCCode>80830-1691-9</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (80830-1691-9)  / 15 mL in 1 VIAL, SINGLE-DOSE (80830-1691-3) </PackageDescription>
    <NDC11Code>80830-1691-09</NDC11Code>
    <ProductNDC>80830-1691</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Potassium Phosphates</ProprietaryName>
    <NonProprietaryName>Potassium Phosphate, Monobasic Potassium Phosphate, Dibasic Injection,</NonProprietaryName>
    <DosageFormName>SOLUTION, CONCENTRATE</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20250709</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216344</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
    <SubstanceName>POTASSIUM PHOSPHATE, MONOBASIC; POTASSIUM PHOSPHATE, DIBASIC</SubstanceName>
    <StrengthNumber>224; 236</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250709</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Potassium phosphates injection is indicated as a source of phosphorus: : 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated. , 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated. .</IndicationAndUsage>
    <Description>Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile clear, colorless, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate, USP and dibasic potassium phosphate, USP in water for injection. It is supplied as a 15 mL single-dose vial. Monobasic potassium phosphate, USP is chemically designated potassium dihydrogen phosphate. The molecular formula is KH2PO4, molecular weight is 136.084 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water and practically insoluble in alcohol. Dibasic potassium phosphate, USP is chemically designated dipotassium hydrogen phosphate. The molecular formula is K2HPO4, molecular weight is 174.18 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water. Each mL of Potassium Phosphates Injection, USP contains monobasic potassium phosphate USP, 224 mg; dibasic potassium phosphate USP, 236 mg and water for injection. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route.</Description>
  </NDC>
  <NDC>
    <NDCCode>72162-1079-0</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE, PLASTIC (72162-1079-0) </PackageDescription>
    <NDC11Code>72162-1079-00</NDC11Code>
    <ProductNDC>72162-1079</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Baclofen</ProprietaryName>
    <NonProprietaryName>Baclofen</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20070701</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078220</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>BACLOFEN</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-02-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230508</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Baclofen tablets USP are useful for the alleviation of signs and symptoms of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. Patients should have reversible spasticity so that baclofen treatment will aid in restoring residual function. Baclofen tablets USP may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Baclofen tablets USP are not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders. The efficacy of baclofen in stroke, cerebral palsy, and Parkinson's disease has not been established and, therefore, it is not recommended for these conditions.</IndicationAndUsage>
    <Description>Baclofen, USP is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl)-butanoic acid. The structural formula is. Baclofen USP is a white to off-white, odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol and insoluble in chloroform. Each tablet, for oral administration, contains 5 mg, 10 mg or 20 mg baclofen. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, and magnesium stearate.</Description>
  </NDC>
  <NDC>
    <NDCCode>72162-1080-0</NDCCode>
    <PackageDescription>120 TABLET in 1 BOTTLE, PLASTIC (72162-1080-0) </PackageDescription>
    <NDC11Code>72162-1080-00</NDC11Code>
    <ProductNDC>72162-1080</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Baclofen</ProprietaryName>
    <NonProprietaryName>Baclofen</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20051220</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077241</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>BACLOFEN</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-02-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230508</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Baclofen tablets USP are useful for the alleviation of signs and symptoms of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. Patients should have reversible spasticity so that baclofen treatment will aid in restoring residual function. Baclofen tablets USP may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Baclofen tablets USP are not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders. The efficacy of baclofen in stroke, cerebral palsy, and Parkinson's disease has not been established and, therefore, it is not recommended for these conditions.</IndicationAndUsage>
    <Description>Baclofen, USP is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl)-butanoic acid. The structural formula is. Baclofen USP is a white to off-white, odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol and insoluble in chloroform. Each tablet, for oral administration, contains 5 mg, 10 mg or 20 mg baclofen. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, and magnesium stearate.</Description>
  </NDC>
  <NDC>
    <NDCCode>72162-1081-0</NDCCode>
    <PackageDescription>10 TABLET in 1 BOTTLE, PLASTIC (72162-1081-0) </PackageDescription>
    <NDC11Code>72162-1081-00</NDC11Code>
    <ProductNDC>72162-1081</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hydromorphone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20091209</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077471</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2025-07-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230508</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hydromorphone hydrochloride tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see Warnings and Precautions (5.2)], reserve hydromorphone hydrochloride tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>72162-1090-0</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE (72162-1090-0) </PackageDescription>
    <NDC11Code>72162-1090-00</NDC11Code>
    <ProductNDC>72162-1090</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levothyroxine Sodium</ProprietaryName>
    <NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200803</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA021342</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
    <StrengthNumber>88</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200803</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary) and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use:  Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)].  Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
    <Description>Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'- tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O (where x = 5), molecular weight of 798.86 g/mol (anhydrous) and structural formula as shown. Levothyroxine sodium tablets for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients Magnesium Stearate, NF; Microcrystalline Cellulose, NF; Colloidal Silicone Dioxide, NF; and Sodium Starch Glycolate, NF. Each tablet strength meets USP Dissolution Test 2. Table 6 provides a listing of the color additives by tablet strength. Table 6. Levothyroxine Sodium Tablets Color Additives.</Description>
  </NDC>
  <NDC>
    <NDCCode>72162-1091-0</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE (72162-1091-0) </PackageDescription>
    <NDC11Code>72162-1091-00</NDC11Code>
    <ProductNDC>72162-1091</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levothyroxine Sodium</ProprietaryName>
    <NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200803</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA021342</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
    <StrengthNumber>112</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200803</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary) and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use:  Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)].  Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
    <Description>Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'- tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O (where x = 5), molecular weight of 798.86 g/mol (anhydrous) and structural formula as shown. Levothyroxine sodium tablets for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients Magnesium Stearate, NF; Microcrystalline Cellulose, NF; Colloidal Silicone Dioxide, NF; and Sodium Starch Glycolate, NF. Each tablet strength meets USP Dissolution Test 2. Table 6 provides a listing of the color additives by tablet strength. Table 6. Levothyroxine Sodium Tablets Color Additives.</Description>
  </NDC>
  <NDC>
    <NDCCode>72162-1092-0</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE (72162-1092-0) </PackageDescription>
    <NDC11Code>72162-1092-00</NDC11Code>
    <ProductNDC>72162-1092</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levothyroxine Sodium</ProprietaryName>
    <NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200803</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA021342</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
    <StrengthNumber>137</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-04-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200803</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary) and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use:  Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)].  Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
    <Description>Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'- tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O (where x = 5), molecular weight of 798.86 g/mol (anhydrous) and structural formula as shown. Levothyroxine sodium tablets for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients Magnesium Stearate, NF; Microcrystalline Cellulose, NF; Colloidal Silicone Dioxide, NF; and Sodium Starch Glycolate, NF. Each tablet strength meets USP Dissolution Test 2. Table 6 provides a listing of the color additives by tablet strength. Table 6. Levothyroxine Sodium Tablets Color Additives.</Description>
  </NDC>
  <NDC>
    <NDCCode>72162-1093-0</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE (72162-1093-0) </PackageDescription>
    <NDC11Code>72162-1093-00</NDC11Code>
    <ProductNDC>72162-1093</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levothyroxine Sodium</ProprietaryName>
    <NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200803</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA021342</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
    <StrengthNumber>175</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200803</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary) and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use:  Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)].  Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
    <Description>Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'- tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O (where x = 5), molecular weight of 798.86 g/mol (anhydrous) and structural formula as shown. Levothyroxine sodium tablets for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients Magnesium Stearate, NF; Microcrystalline Cellulose, NF; Colloidal Silicone Dioxide, NF; and Sodium Starch Glycolate, NF. Each tablet strength meets USP Dissolution Test 2. Table 6 provides a listing of the color additives by tablet strength. Table 6. Levothyroxine Sodium Tablets Color Additives.</Description>
  </NDC>
  <NDC>
    <NDCCode>72162-1094-0</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE (72162-1094-0) </PackageDescription>
    <NDC11Code>72162-1094-00</NDC11Code>
    <ProductNDC>72162-1094</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levothyroxine Sodium</ProprietaryName>
    <NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200803</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA021342</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200803</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary) and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use:  Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)].  Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
    <Description>Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'- tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O (where x = 5), molecular weight of 798.86 g/mol (anhydrous) and structural formula as shown. Levothyroxine sodium tablets for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients Magnesium Stearate, NF; Microcrystalline Cellulose, NF; Colloidal Silicone Dioxide, NF; and Sodium Starch Glycolate, NF. Each tablet strength meets USP Dissolution Test 2. Table 6 provides a listing of the color additives by tablet strength. Table 6. Levothyroxine Sodium Tablets Color Additives.</Description>
  </NDC>
  <NDC>
    <NDCCode>72162-1095-0</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE (72162-1095-0) </PackageDescription>
    <NDC11Code>72162-1095-00</NDC11Code>
    <ProductNDC>72162-1095</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levothyroxine Sodium</ProprietaryName>
    <NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200803</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA021342</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200803</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary) and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use:  Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)].  Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
    <Description>Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'- tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O (where x = 5), molecular weight of 798.86 g/mol (anhydrous) and structural formula as shown. Levothyroxine sodium tablets for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients Magnesium Stearate, NF; Microcrystalline Cellulose, NF; Colloidal Silicone Dioxide, NF; and Sodium Starch Glycolate, NF. Each tablet strength meets USP Dissolution Test 2. Table 6 provides a listing of the color additives by tablet strength. Table 6. Levothyroxine Sodium Tablets Color Additives.</Description>
  </NDC>
  <NDC>
    <NDCCode>72162-1149-0</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE (72162-1149-0) </PackageDescription>
    <NDC11Code>72162-1149-00</NDC11Code>
    <ProductNDC>72162-1149</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Allopurinol</ProprietaryName>
    <NonProprietaryName>Allopurinol</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20030627</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075798</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>ALLOPURINOL</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-04-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20030627</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Allopurinol tablets are indicated for: 1 The management of adults with signs and symptoms of primary or secondary gout (acute attacks, tophi, joint destruction, uric acid lithiasis, and/or nephropathy), 2 The management of adult and pediatric patients with leukemia, lymphoma and solid tumor malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels, 3 The management of adult patients with recurrent calcium oxalate calculi whose daily uric acid excretion exceeds 800 mg/day in male patients and 750 mg/day in female patients, despite lifestyle changes (such as reduction of dietary sodium, non-dairy animal protein, oxylate rich foods, refined sugars and increases in oral fluids and fruits and vegetables).</IndicationAndUsage>
    <Description>Allopurinol, USP is a xanthine oxidase inhibitor. It has the following structural formula. Allopurinol, USP is known chemically as 1, 5-dihydro-4H-pyrazolo [3, 4-d]pyrimidin-4-one and it has a molecular weight of 136.1 g/mol. Soluble in solutions of potassium and sodium hydroxides, very slightly soluble in water and in alcohol; practically insoluble in chloroform and in ether. It is a xanthine oxidase inhibitor which is administered orally. Each scored white round-shaped tablet contains 100 mg allopurinol and the inactive ingredients colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate. Each scored orange round-shaped tablet contains 300 mg allopurinol and the inactive ingredients colloidal silicon dioxide, FD&amp;C Yellow No. 6 Lake, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate.</Description>
  </NDC>
</NDCList>