RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>72162-1698-0</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE (72162-1698-0) </PackageDescription>
    <NDC11Code>72162-1698-00</NDC11Code>
    <ProductNDC>72162-1698</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Losartan Potassium Tablets, 100 Mg</ProprietaryName>
    <NonProprietaryName>Losartan Potassium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20120918</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA201170</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>LOSARTAN POTASSIUM</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240206</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Losartan potassium is an angiotensin II receptor blocker (ARB) indicated for: : 1 Treatment of hypertension, to lower blood pressure in adults and children greater than 6 years old. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1), 2 Reduction of the risk of stroke in patients with hypertension and left ventricular hypertrophy. There is evidence that this benefit does not apply to Black patients. (1.2), 3 Treatment of diabetic nephropathy with an elevated serum creatinine and proteinuria in patients with type 2 diabetes and a history of hypertension. (1.3).</IndicationAndUsage>
    <Description>Losartan potassium is an angiotensin II receptor blocker acting on the AT1 receptor subtype. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-1-[p-(o-1H­tetrazol-5-ylphenyl)benzyl]imidazole-5-methanol monopotassium salt. Its empirical formula is C22H22ClKN6O, and its structural formula is. Losartan potassium, USP is a white to off-white free-flowing crystalline powder with a molecular weight of 461.01. It is freely soluble in water, soluble in alcohols, and slightly soluble in common organic solvents, such as acetonitrile and methyl ethyl ketone. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Losartan potassium is available as tablets for oral administration containing either 25 mg, 50 mg or 100 mg of losartan potassium, USP and the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, pregelatinized starch, magnesium stearate, polyvinyl alcohol, ployethylene glycol/macrogol, talc, titanium dioxide, D&amp;C yellow No. 10 aluminum lake and FD&amp;C blue No. 2/indigo carmine aluminum lake. Losartan potassium tablets 25 mg, 50 mg and 100 mg contain potassium in the  following amounts:  2.12 mg (0.054 mEq), 4.24 mg (0.108 mEq) and 8.48 mg (0.216 mEq), respectively.</Description>
  </NDC>
  <NDC>
    <NDCCode>51927-1698-0</NDCCode>
    <PackageDescription>1 kg in 1 CONTAINER (51927-1698-0)</PackageDescription>
    <NDC11Code>51927-1698-00</NDC11Code>
    <ProductNDC>51927-1698</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Estradiol Valerate</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20020719</StartMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
    <LabelerName>Professional Compounding Centers of America dba PCCA</LabelerName>
    <SubstanceName>ESTRADIOL VALERATE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>kg/kg</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2014-02-04</LastUpdate>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>70710-1698-0</NDCCode>
    <PackageDescription>1000 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (70710-1698-0) </PackageDescription>
    <NDC11Code>70710-1698-00</NDC11Code>
    <ProductNDC>70710-1698</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Venlafaxine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Venlafaxine Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230518</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090174</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>VENLAFAXINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>37.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230518</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Venlafaxine hydrochloride extended-release capsules are indicated in adults for the treatment of: 1 Major Depressive Disorder (MDD) [see Clinical Studies (14.1)], 2 Generalized Anxiety Disorder (GAD) [see Clinical Studies (14.2)], 3 Social Anxiety Disorder (SAD) [see Clinical Studies (14.3)], 4 Panic Disorder (PD) [see Clinical Studies (14.4)].</IndicationAndUsage>
    <Description>Venlafaxine hydrochloride extended-release capsule, USP is an extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride, a SNRI. Venlafaxine is designated 1-[2-(Dimethylamino)-1-(4-methoxyphenyl)ethyl] Cyclohexanol Hydrochloride salt or (±)-1-[α- [(dimethylamino)methyl]-pmethoxybenzyl] cyclohexanol hydrochloride and has the molecular formula of C17H27NO2 HCl. Its molecular weight is 313.86. The structural formula is shown as follows. Venlafaxine hydrochloride, USP is a white to off-white crystalline powder; soluble in methanol and in water. Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Drug release is controlled by diffusion through the coating membrane on the spheroids and is not pH-dependent. Venlafaxine hydrochloride extended-release capsules, USP intended for oral administration contains 37.5 mg, 75 mg and 150 mg of venlafaxine. In addition, each capsule contains the following inactive ingredients: ethyl cellulose, hypromellose, microcrystalline cellulose, polyethylene glycol and talc. The capsule shell contains gelatin, purified water, sodium lauryl sulfate and titanium dioxide. Additionally each 37.5 mg capsule shell contains iron oxide black and each 75 mg and 150 mg capsule shell contains iron oxide red. The capsule is imprinted with black pharmaceutical ink and contains following inactive ingredients: black iron oxide, potassium hydroxide, propylene glycol, purified water and shellac. Venlafaxine Hydrochloride Extended-Release Capsules, USP meets USP dissolution test 13.</Description>
  </NDC>
  <NDC>
    <NDCCode>22840-1698-1</NDCCode>
    <PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (22840-1698-1) </PackageDescription>
    <NDC11Code>22840-1698-01</NDC11Code>
    <ProductNDC>22840-1698</ProductNDC>
    <ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Mucor Plumbeus</ProprietaryName>
    <NonProprietaryName>Mucor Plumbeus</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19810915</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101833</ApplicationNumber>
    <LabelerName>Greer Laboratories, Inc.</LabelerName>
    <SubstanceName>MUCOR PLUMBEUS</SubstanceName>
    <StrengthNumber>.001</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Fungal Proteins [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19810915</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Allergenic Extracts are indicated for the diagnosis and treatment of patients with immediate hypersensitivity allergy to the respective allergens, inhaled, ingested or otherwise introduced into contact with sensitive tissues. The diagnosis of IgE‑mediated allergy may be established by the allergy history, clinical evaluation, and skin test reactivity. (4,7,11) Immunotherapy with Allergenic Extracts is indicated when testing and patient history have identified the offending allergens and when it is not possible or practical to avoid these allergens. (12‑14) Food extracts have not been proven effective in immunotherapy. The use of Allergenic Extracts for the above purposes should be made only by physicians with special familiarity and knowledge of allergy. (See DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
    <Description>Allergenic Extracts are supplied as a sterile solution for intracutaneous or subcutaneous administration. Concentrates contain the soluble extractants of the source material with 0.5% sodium chloride and 0.54% sodium bicarbonate at a pH of 6.8 to 8.4 as aqueous extracts in water for injection or in 50% glycerin. Aqueous extracts contain 0.4% phenol as a preservative and 50% glycerinated extracts contain 0.2% phenol. Diluted aqueous extracts contain Buffered Saline with 0.5% sodium chloride, 0.04% potassium phosphate, 0.11% sodium phosphate heptahydrate, and 0.4% phenol in water for injection. Source materials for these extracts are as follows: Pollens are collected from the respective grasses, weeds, trees, shrubs, cultured plants and flowers. Mold extracts are produced from pure culture mycelial mats. Rusts and smuts are obtained from natural growths. Epidermal extracts are produced from the hide, hair, or feathers containing the natural dander, or from separated dander. Insects are the whole body insects. House dust is made from various dusts ordinarily found in the home with the extract dialyzed to remove low‑molecular weight irritants and concentrated to an extraction ratio of 1:1. Food extracts are prepared from the edible portions of the respective foods, obtained fresh if possible. Certain diagnostic food extracts contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Other miscellaneous inhalants involved in respiratory allergy are obtained in the naturally occurring form to which a patient may be exposed. Extracts are labeled either by weight‑to‑volume (w/v) based on the weight of the source material to the volume of the extracting fluid, or in protein nitrogen units (PNU) based on assay with one PNU representing 0.00001 mg of protein nitrogen.</Description>
  </NDC>
  <NDC>
    <NDCCode>36987-1698-1</NDCCode>
    <PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (36987-1698-1)</PackageDescription>
    <NDC11Code>36987-1698-01</NDC11Code>
    <ProductNDC>36987-1698</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Horseradish</ProprietaryName>
    <NonProprietaryName>Horseradish</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19720829</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102192</ApplicationNumber>
    <LabelerName>Nelco Laboratories, Inc.</LabelerName>
    <SubstanceName>HORSERADISH</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Non-Standardized Plant Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Plant Proteins [CS],Food Additives [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
    <Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
  </NDC>
  <NDC>
    <NDCCode>36987-1698-2</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (36987-1698-2)</PackageDescription>
    <NDC11Code>36987-1698-02</NDC11Code>
    <ProductNDC>36987-1698</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Horseradish</ProprietaryName>
    <NonProprietaryName>Horseradish</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19720829</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102192</ApplicationNumber>
    <LabelerName>Nelco Laboratories, Inc.</LabelerName>
    <SubstanceName>HORSERADISH</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Non-Standardized Plant Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Plant Proteins [CS],Food Additives [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
    <Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
  </NDC>
  <NDC>
    <NDCCode>36987-1698-3</NDCCode>
    <PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (36987-1698-3)</PackageDescription>
    <NDC11Code>36987-1698-03</NDC11Code>
    <ProductNDC>36987-1698</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Horseradish</ProprietaryName>
    <NonProprietaryName>Horseradish</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19720829</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102192</ApplicationNumber>
    <LabelerName>Nelco Laboratories, Inc.</LabelerName>
    <SubstanceName>HORSERADISH</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Non-Standardized Plant Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Plant Proteins [CS],Food Additives [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
    <Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
  </NDC>
  <NDC>
    <NDCCode>36987-1698-4</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (36987-1698-4)</PackageDescription>
    <NDC11Code>36987-1698-04</NDC11Code>
    <ProductNDC>36987-1698</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Horseradish</ProprietaryName>
    <NonProprietaryName>Horseradish</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19720829</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102192</ApplicationNumber>
    <LabelerName>Nelco Laboratories, Inc.</LabelerName>
    <SubstanceName>HORSERADISH</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Non-Standardized Plant Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Plant Proteins [CS],Food Additives [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
    <Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
  </NDC>
  <NDC>
    <NDCCode>51662-1698-3</NDCCode>
    <PackageDescription>25 POUCH in 1 CASE (51662-1698-3)  / 1 AMPULE in 1 POUCH (51662-1698-2)  / 1 mL in 1 AMPULE</PackageDescription>
    <NDC11Code>51662-1698-03</NDC11Code>
    <ProductNDC>51662-1698</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Phytonadione</ProprietaryName>
    <NonProprietaryName>Phytonadione</NonProprietaryName>
    <DosageFormName>INJECTION, EMULSION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20190531</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207719</ApplicationNumber>
    <LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
    <SubstanceName>PHYTONADIONE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Increased Prothrombin Activity [PE], Reversed Anticoagulation Activity [PE], Vitamin K [CS], Vitamin K [EPC], Warfarin Reversal Agent [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190531</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Phytonadione injectable emulsion, USP is indicated in the following coagulation disorders which are due to faulty formation of factors II, VII, IX and X when caused by Vitamin K deficiency or interference with Vitamin K activity. Phytonadione injectable emulsion is indicated in­­. anticoagulant-induced prothrombin deficiency caused by coumarin or indanedione derivatives;. ­­ prophylaxis and therapy of hemorrhagic disease of the newborn;. ­­ hypoprothrombinemia due to antibacterial therapy;. hypoprothrombinemia secondary to factors limiting absorption or synthesis of Vitamin K, e.g., obstructive jaundice, biliary fistula, sprue, ulcerative colitis, celiac disease, intestinal resection, cystic fibrosis of the pancreas, and regional enteritis;. other drug-induced hypoprothrombinemia where it is definitely shown that the result is due to interference with phytonadione injectable emulsion metabolism, e.g., salicylates.</IndicationAndUsage>
    <Description>Phytonadione is a vitamin, which is a clear, yellow to amber, viscous, odorless or nearly odorlessliquid. It is insoluble in water, soluble in chloroform and slightly soluble in ethanol. It has a molecular weight of 450.70.Phytonadione is 2-methyl-3-phytyl-1, 4-naphthoquinone. Its empirical formula is C31H46O2 and its structural formula is. Phytonadione injectable emulsion, USP is a yellow, sterile, nonpyrogenic aqueous dispersion available for injection by the intravenous, intramuscular and subcutaneous routes. Each milliliter contains phytonadione 10 mg, polyoxyethylated fatty acid derivative 70 mg, dextrose, hydrous 37.5 mg in water for injection; benzyl alcohol 9 mg added as preservative. May contain hydrochloric acid for pH adjustment. pH is 6.3 (5.0 to 7.0). Phytonadione is oxygen sensitive.</Description>
  </NDC>
  <NDC>
    <NDCCode>67296-1698-1</NDCCode>
    <PackageDescription>25 mL in 1 AMPULE (67296-1698-1) </PackageDescription>
    <NDC11Code>67296-1698-01</NDC11Code>
    <ProductNDC>67296-1698</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Albuterol Sulfate</ProprietaryName>
    <NonProprietaryName>Albuterol Sulfate</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>20121015</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077839</ApplicationNumber>
    <LabelerName>RedPharm Drug</LabelerName>
    <SubstanceName>ALBUTEROL SULFATE</SubstanceName>
    <StrengthNumber>2.5</StrengthNumber>
    <StrengthUnit>mg/3mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20130411</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Albuterol sulfate inhalation solution is indicated for the relief of bronchospasm in patients 2 years of age and older with reversible obstructive airway disease and acute attacks of bronchospasm.</IndicationAndUsage>
    <Description>Albuterol sulfate inhalation solution is a relatively selective beta 2-adrenergic bronchodilator (see CLINICAL PHARMACOLOGYsection below). Albuterol sulfate, the racemic form of albuterol, has the chemical name α 1-[( tert-Butylamino)methyl]-4-hydroxy- m-xylene-α,α'-diol sulfate (2:1) (salt), and the following structural formula:. Albuterol sulfate has a molecular weight of 576.70, and the molecular formula (C 13H 21NO 3) 2 H 2SO 4. Albuterol sulfate is a white or practically white powder, freely soluble in water and slightly soluble in alcohol. The World Health Organization recommended name for albuterol base is salbutamol. Albuterol sulfate inhalation solution 0.083% requires no dilution before administration. Each milliliter of Albuterol Sulfate Inhalation Solution 0.083% contains 0.83 mg of albuterol (as 1 mg of albuterol sulfate) in an isotonic, sterile, aqueous solution containing sodium chloride; sulfuric acid is used to adjust the pH to between 3 and 5. Albuterol Sulfate Inhalation Solution 0.083% contains no sulfiting agents or preservatives. Albuterol sulfate inhalation solution is a clear, colorless to light yellow solution.</Description>
  </NDC>
  <NDC>
    <NDCCode>67296-1698-2</NDCCode>
    <PackageDescription>75 mL in 1 AMPULE (67296-1698-2) </PackageDescription>
    <NDC11Code>67296-1698-02</NDC11Code>
    <ProductNDC>67296-1698</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Albuterol Sulfate</ProprietaryName>
    <NonProprietaryName>Albuterol Sulfate</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>20121015</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077839</ApplicationNumber>
    <LabelerName>RedPharm Drug</LabelerName>
    <SubstanceName>ALBUTEROL SULFATE</SubstanceName>
    <StrengthNumber>2.5</StrengthNumber>
    <StrengthUnit>mg/3mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20140306</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Albuterol sulfate inhalation solution is indicated for the relief of bronchospasm in patients 2 years of age and older with reversible obstructive airway disease and acute attacks of bronchospasm.</IndicationAndUsage>
    <Description>Albuterol sulfate inhalation solution is a relatively selective beta 2-adrenergic bronchodilator (see CLINICAL PHARMACOLOGYsection below). Albuterol sulfate, the racemic form of albuterol, has the chemical name α 1-[( tert-Butylamino)methyl]-4-hydroxy- m-xylene-α,α'-diol sulfate (2:1) (salt), and the following structural formula:. Albuterol sulfate has a molecular weight of 576.70, and the molecular formula (C 13H 21NO 3) 2 H 2SO 4. Albuterol sulfate is a white or practically white powder, freely soluble in water and slightly soluble in alcohol. The World Health Organization recommended name for albuterol base is salbutamol. Albuterol sulfate inhalation solution 0.083% requires no dilution before administration. Each milliliter of Albuterol Sulfate Inhalation Solution 0.083% contains 0.83 mg of albuterol (as 1 mg of albuterol sulfate) in an isotonic, sterile, aqueous solution containing sodium chloride; sulfuric acid is used to adjust the pH to between 3 and 5. Albuterol Sulfate Inhalation Solution 0.083% contains no sulfiting agents or preservatives. Albuterol sulfate inhalation solution is a clear, colorless to light yellow solution.</Description>
  </NDC>
  <NDC>
    <NDCCode>70121-1698-7</NDCCode>
    <PackageDescription>10 SYRINGE, GLASS in 1 CARTON (70121-1698-7)  / 1 mL in 1 SYRINGE, GLASS (70121-1698-1) </PackageDescription>
    <NDC11Code>70121-1698-07</NDC11Code>
    <ProductNDC>70121-1698</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glycopyrrolate</ProprietaryName>
    <NonProprietaryName>Glycopyrrolate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20221025</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215333</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
    <SubstanceName>GLYCOPYRROLATE</SubstanceName>
    <StrengthNumber>.2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-05-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221025</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. It is a quaternary ammonium salt with the following chemical name: pyrrolidinium, 3-[(SR) (cyclopentylhydroxyphenylacetyl) oxy]-1,1-dimethyl-, [RS-] bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.34 g/mol. Its structural formula is as follows. Glycopyrrolate, USP occurs as a white, odorless, crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. It is completely ionized at physiological pH values. Glycopyrrolate injection, USP, is a clear, colorless, sterile liquid with a pH of 2.0 to 3.0. The partition coefficient of glycopyrrolate in n-octanol/water system is 0.304 (log10 P = -1.52) at ambient room temperature (24°C). Glycopyrrolate injection, USP, is intended for intramuscular or intravenous administration. Each 1 mL contains 0.2 mg of glycopyrrolate, USP water for injection, USP q.s. and hydrochloric acid or sodium hydroxide as pH adjusters. Glycopyrrolate injection , USP is preservative free.</Description>
  </NDC>
  <NDC>
    <NDCCode>70710-1698-3</NDCCode>
    <PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (70710-1698-3) </PackageDescription>
    <NDC11Code>70710-1698-03</NDC11Code>
    <ProductNDC>70710-1698</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Venlafaxine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Venlafaxine Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230518</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090174</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>VENLAFAXINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>37.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230518</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Venlafaxine hydrochloride extended-release capsules are indicated in adults for the treatment of: 1 Major Depressive Disorder (MDD) [see Clinical Studies (14.1)], 2 Generalized Anxiety Disorder (GAD) [see Clinical Studies (14.2)], 3 Social Anxiety Disorder (SAD) [see Clinical Studies (14.3)], 4 Panic Disorder (PD) [see Clinical Studies (14.4)].</IndicationAndUsage>
    <Description>Venlafaxine hydrochloride extended-release capsule, USP is an extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride, a SNRI. Venlafaxine is designated 1-[2-(Dimethylamino)-1-(4-methoxyphenyl)ethyl] Cyclohexanol Hydrochloride salt or (±)-1-[α- [(dimethylamino)methyl]-pmethoxybenzyl] cyclohexanol hydrochloride and has the molecular formula of C17H27NO2 HCl. Its molecular weight is 313.86. The structural formula is shown as follows. Venlafaxine hydrochloride, USP is a white to off-white crystalline powder; soluble in methanol and in water. Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Drug release is controlled by diffusion through the coating membrane on the spheroids and is not pH-dependent. Venlafaxine hydrochloride extended-release capsules, USP intended for oral administration contains 37.5 mg, 75 mg and 150 mg of venlafaxine. In addition, each capsule contains the following inactive ingredients: ethyl cellulose, hypromellose, microcrystalline cellulose, polyethylene glycol and talc. The capsule shell contains gelatin, purified water, sodium lauryl sulfate and titanium dioxide. Additionally each 37.5 mg capsule shell contains iron oxide black and each 75 mg and 150 mg capsule shell contains iron oxide red. The capsule is imprinted with black pharmaceutical ink and contains following inactive ingredients: black iron oxide, potassium hydroxide, propylene glycol, purified water and shellac. Venlafaxine Hydrochloride Extended-Release Capsules, USP meets USP dissolution test 13.</Description>
  </NDC>
  <NDC>
    <NDCCode>70710-1698-4</NDCCode>
    <PackageDescription>10 BLISTER PACK in 1 CARTON (70710-1698-4)  / 10 CAPSULE, EXTENDED RELEASE in 1 BLISTER PACK (70710-1698-2) </PackageDescription>
    <NDC11Code>70710-1698-04</NDC11Code>
    <ProductNDC>70710-1698</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Venlafaxine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Venlafaxine Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230518</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090174</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>VENLAFAXINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>37.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230518</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Venlafaxine hydrochloride extended-release capsules are indicated in adults for the treatment of: 1 Major Depressive Disorder (MDD) [see Clinical Studies (14.1)], 2 Generalized Anxiety Disorder (GAD) [see Clinical Studies (14.2)], 3 Social Anxiety Disorder (SAD) [see Clinical Studies (14.3)], 4 Panic Disorder (PD) [see Clinical Studies (14.4)].</IndicationAndUsage>
    <Description>Venlafaxine hydrochloride extended-release capsule, USP is an extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride, a SNRI. Venlafaxine is designated 1-[2-(Dimethylamino)-1-(4-methoxyphenyl)ethyl] Cyclohexanol Hydrochloride salt or (±)-1-[α- [(dimethylamino)methyl]-pmethoxybenzyl] cyclohexanol hydrochloride and has the molecular formula of C17H27NO2 HCl. Its molecular weight is 313.86. The structural formula is shown as follows. Venlafaxine hydrochloride, USP is a white to off-white crystalline powder; soluble in methanol and in water. Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Drug release is controlled by diffusion through the coating membrane on the spheroids and is not pH-dependent. Venlafaxine hydrochloride extended-release capsules, USP intended for oral administration contains 37.5 mg, 75 mg and 150 mg of venlafaxine. In addition, each capsule contains the following inactive ingredients: ethyl cellulose, hypromellose, microcrystalline cellulose, polyethylene glycol and talc. The capsule shell contains gelatin, purified water, sodium lauryl sulfate and titanium dioxide. Additionally each 37.5 mg capsule shell contains iron oxide black and each 75 mg and 150 mg capsule shell contains iron oxide red. The capsule is imprinted with black pharmaceutical ink and contains following inactive ingredients: black iron oxide, potassium hydroxide, propylene glycol, purified water and shellac. Venlafaxine Hydrochloride Extended-Release Capsules, USP meets USP dissolution test 13.</Description>
  </NDC>
  <NDC>
    <NDCCode>70710-1698-5</NDCCode>
    <PackageDescription>500 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (70710-1698-5) </PackageDescription>
    <NDC11Code>70710-1698-05</NDC11Code>
    <ProductNDC>70710-1698</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Venlafaxine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Venlafaxine Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230518</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090174</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>VENLAFAXINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>37.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230518</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Venlafaxine hydrochloride extended-release capsules are indicated in adults for the treatment of: 1 Major Depressive Disorder (MDD) [see Clinical Studies (14.1)], 2 Generalized Anxiety Disorder (GAD) [see Clinical Studies (14.2)], 3 Social Anxiety Disorder (SAD) [see Clinical Studies (14.3)], 4 Panic Disorder (PD) [see Clinical Studies (14.4)].</IndicationAndUsage>
    <Description>Venlafaxine hydrochloride extended-release capsule, USP is an extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride, a SNRI. Venlafaxine is designated 1-[2-(Dimethylamino)-1-(4-methoxyphenyl)ethyl] Cyclohexanol Hydrochloride salt or (±)-1-[α- [(dimethylamino)methyl]-pmethoxybenzyl] cyclohexanol hydrochloride and has the molecular formula of C17H27NO2 HCl. Its molecular weight is 313.86. The structural formula is shown as follows. Venlafaxine hydrochloride, USP is a white to off-white crystalline powder; soluble in methanol and in water. Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Drug release is controlled by diffusion through the coating membrane on the spheroids and is not pH-dependent. Venlafaxine hydrochloride extended-release capsules, USP intended for oral administration contains 37.5 mg, 75 mg and 150 mg of venlafaxine. In addition, each capsule contains the following inactive ingredients: ethyl cellulose, hypromellose, microcrystalline cellulose, polyethylene glycol and talc. The capsule shell contains gelatin, purified water, sodium lauryl sulfate and titanium dioxide. Additionally each 37.5 mg capsule shell contains iron oxide black and each 75 mg and 150 mg capsule shell contains iron oxide red. The capsule is imprinted with black pharmaceutical ink and contains following inactive ingredients: black iron oxide, potassium hydroxide, propylene glycol, purified water and shellac. Venlafaxine Hydrochloride Extended-Release Capsules, USP meets USP dissolution test 13.</Description>
  </NDC>
  <NDC>
    <NDCCode>70710-1698-9</NDCCode>
    <PackageDescription>90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (70710-1698-9) </PackageDescription>
    <NDC11Code>70710-1698-09</NDC11Code>
    <ProductNDC>70710-1698</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Venlafaxine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Venlafaxine Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230518</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090174</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>VENLAFAXINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>37.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230518</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Venlafaxine hydrochloride extended-release capsules are indicated in adults for the treatment of: 1 Major Depressive Disorder (MDD) [see Clinical Studies (14.1)], 2 Generalized Anxiety Disorder (GAD) [see Clinical Studies (14.2)], 3 Social Anxiety Disorder (SAD) [see Clinical Studies (14.3)], 4 Panic Disorder (PD) [see Clinical Studies (14.4)].</IndicationAndUsage>
    <Description>Venlafaxine hydrochloride extended-release capsule, USP is an extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride, a SNRI. Venlafaxine is designated 1-[2-(Dimethylamino)-1-(4-methoxyphenyl)ethyl] Cyclohexanol Hydrochloride salt or (±)-1-[α- [(dimethylamino)methyl]-pmethoxybenzyl] cyclohexanol hydrochloride and has the molecular formula of C17H27NO2 HCl. Its molecular weight is 313.86. The structural formula is shown as follows. Venlafaxine hydrochloride, USP is a white to off-white crystalline powder; soluble in methanol and in water. Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Drug release is controlled by diffusion through the coating membrane on the spheroids and is not pH-dependent. Venlafaxine hydrochloride extended-release capsules, USP intended for oral administration contains 37.5 mg, 75 mg and 150 mg of venlafaxine. In addition, each capsule contains the following inactive ingredients: ethyl cellulose, hypromellose, microcrystalline cellulose, polyethylene glycol and talc. The capsule shell contains gelatin, purified water, sodium lauryl sulfate and titanium dioxide. Additionally each 37.5 mg capsule shell contains iron oxide black and each 75 mg and 150 mg capsule shell contains iron oxide red. The capsule is imprinted with black pharmaceutical ink and contains following inactive ingredients: black iron oxide, potassium hydroxide, propylene glycol, purified water and shellac. Venlafaxine Hydrochloride Extended-Release Capsules, USP meets USP dissolution test 13.</Description>
  </NDC>
  <NDC>
    <NDCCode>72162-1079-0</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE, PLASTIC (72162-1079-0) </PackageDescription>
    <NDC11Code>72162-1079-00</NDC11Code>
    <ProductNDC>72162-1079</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Baclofen</ProprietaryName>
    <NonProprietaryName>Baclofen</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20070701</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078220</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>BACLOFEN</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-02-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230508</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Baclofen tablets USP are useful for the alleviation of signs and symptoms of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. Patients should have reversible spasticity so that baclofen treatment will aid in restoring residual function. Baclofen tablets USP may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Baclofen tablets USP are not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders. The efficacy of baclofen in stroke, cerebral palsy, and Parkinson's disease has not been established and, therefore, it is not recommended for these conditions.</IndicationAndUsage>
    <Description>Baclofen, USP is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl)-butanoic acid. The structural formula is. Baclofen USP is a white to off-white, odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol and insoluble in chloroform. Each tablet, for oral administration, contains 5 mg, 10 mg or 20 mg baclofen. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, and magnesium stearate.</Description>
  </NDC>
  <NDC>
    <NDCCode>72162-1080-0</NDCCode>
    <PackageDescription>120 TABLET in 1 BOTTLE, PLASTIC (72162-1080-0) </PackageDescription>
    <NDC11Code>72162-1080-00</NDC11Code>
    <ProductNDC>72162-1080</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Baclofen</ProprietaryName>
    <NonProprietaryName>Baclofen</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20051220</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077241</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>BACLOFEN</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-02-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230508</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Baclofen tablets USP are useful for the alleviation of signs and symptoms of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. Patients should have reversible spasticity so that baclofen treatment will aid in restoring residual function. Baclofen tablets USP may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Baclofen tablets USP are not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders. The efficacy of baclofen in stroke, cerebral palsy, and Parkinson's disease has not been established and, therefore, it is not recommended for these conditions.</IndicationAndUsage>
    <Description>Baclofen, USP is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl)-butanoic acid. The structural formula is. Baclofen USP is a white to off-white, odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol and insoluble in chloroform. Each tablet, for oral administration, contains 5 mg, 10 mg or 20 mg baclofen. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, and magnesium stearate.</Description>
  </NDC>
  <NDC>
    <NDCCode>72162-1081-0</NDCCode>
    <PackageDescription>10 TABLET in 1 BOTTLE, PLASTIC (72162-1081-0) </PackageDescription>
    <NDC11Code>72162-1081-00</NDC11Code>
    <ProductNDC>72162-1081</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hydromorphone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20091209</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077471</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2025-07-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230508</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hydromorphone hydrochloride tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see Warnings and Precautions (5.2)], reserve hydromorphone hydrochloride tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>72162-1090-0</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE (72162-1090-0) </PackageDescription>
    <NDC11Code>72162-1090-00</NDC11Code>
    <ProductNDC>72162-1090</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levothyroxine Sodium</ProprietaryName>
    <NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200803</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA021342</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
    <StrengthNumber>88</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200803</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary) and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use:  Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)].  Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
    <Description>Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'- tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O (where x = 5), molecular weight of 798.86 g/mol (anhydrous) and structural formula as shown. Levothyroxine sodium tablets for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients Magnesium Stearate, NF; Microcrystalline Cellulose, NF; Colloidal Silicone Dioxide, NF; and Sodium Starch Glycolate, NF. Each tablet strength meets USP Dissolution Test 2. Table 6 provides a listing of the color additives by tablet strength. Table 6. Levothyroxine Sodium Tablets Color Additives.</Description>
  </NDC>
  <NDC>
    <NDCCode>72162-1091-0</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE (72162-1091-0) </PackageDescription>
    <NDC11Code>72162-1091-00</NDC11Code>
    <ProductNDC>72162-1091</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levothyroxine Sodium</ProprietaryName>
    <NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200803</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA021342</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
    <StrengthNumber>112</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200803</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary) and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use:  Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)].  Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
    <Description>Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'- tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O (where x = 5), molecular weight of 798.86 g/mol (anhydrous) and structural formula as shown. Levothyroxine sodium tablets for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients Magnesium Stearate, NF; Microcrystalline Cellulose, NF; Colloidal Silicone Dioxide, NF; and Sodium Starch Glycolate, NF. Each tablet strength meets USP Dissolution Test 2. Table 6 provides a listing of the color additives by tablet strength. Table 6. Levothyroxine Sodium Tablets Color Additives.</Description>
  </NDC>
  <NDC>
    <NDCCode>72162-1092-0</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE (72162-1092-0) </PackageDescription>
    <NDC11Code>72162-1092-00</NDC11Code>
    <ProductNDC>72162-1092</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levothyroxine Sodium</ProprietaryName>
    <NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200803</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA021342</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
    <StrengthNumber>137</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-04-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200803</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary) and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use:  Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)].  Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
    <Description>Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'- tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O (where x = 5), molecular weight of 798.86 g/mol (anhydrous) and structural formula as shown. Levothyroxine sodium tablets for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients Magnesium Stearate, NF; Microcrystalline Cellulose, NF; Colloidal Silicone Dioxide, NF; and Sodium Starch Glycolate, NF. Each tablet strength meets USP Dissolution Test 2. Table 6 provides a listing of the color additives by tablet strength. Table 6. Levothyroxine Sodium Tablets Color Additives.</Description>
  </NDC>
  <NDC>
    <NDCCode>72162-1093-0</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE (72162-1093-0) </PackageDescription>
    <NDC11Code>72162-1093-00</NDC11Code>
    <ProductNDC>72162-1093</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levothyroxine Sodium</ProprietaryName>
    <NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200803</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA021342</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
    <StrengthNumber>175</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200803</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary) and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use:  Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)].  Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
    <Description>Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'- tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O (where x = 5), molecular weight of 798.86 g/mol (anhydrous) and structural formula as shown. Levothyroxine sodium tablets for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients Magnesium Stearate, NF; Microcrystalline Cellulose, NF; Colloidal Silicone Dioxide, NF; and Sodium Starch Glycolate, NF. Each tablet strength meets USP Dissolution Test 2. Table 6 provides a listing of the color additives by tablet strength. Table 6. Levothyroxine Sodium Tablets Color Additives.</Description>
  </NDC>
  <NDC>
    <NDCCode>72162-1094-0</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE (72162-1094-0) </PackageDescription>
    <NDC11Code>72162-1094-00</NDC11Code>
    <ProductNDC>72162-1094</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levothyroxine Sodium</ProprietaryName>
    <NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200803</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA021342</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200803</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary) and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use:  Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)].  Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
    <Description>Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'- tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O (where x = 5), molecular weight of 798.86 g/mol (anhydrous) and structural formula as shown. Levothyroxine sodium tablets for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients Magnesium Stearate, NF; Microcrystalline Cellulose, NF; Colloidal Silicone Dioxide, NF; and Sodium Starch Glycolate, NF. Each tablet strength meets USP Dissolution Test 2. Table 6 provides a listing of the color additives by tablet strength. Table 6. Levothyroxine Sodium Tablets Color Additives.</Description>
  </NDC>
  <NDC>
    <NDCCode>72162-1095-0</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE (72162-1095-0) </PackageDescription>
    <NDC11Code>72162-1095-00</NDC11Code>
    <ProductNDC>72162-1095</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levothyroxine Sodium</ProprietaryName>
    <NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200803</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA021342</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200803</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary) and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use:  Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)].  Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
    <Description>Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'- tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O (where x = 5), molecular weight of 798.86 g/mol (anhydrous) and structural formula as shown. Levothyroxine sodium tablets for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients Magnesium Stearate, NF; Microcrystalline Cellulose, NF; Colloidal Silicone Dioxide, NF; and Sodium Starch Glycolate, NF. Each tablet strength meets USP Dissolution Test 2. Table 6 provides a listing of the color additives by tablet strength. Table 6. Levothyroxine Sodium Tablets Color Additives.</Description>
  </NDC>
  <NDC>
    <NDCCode>72162-1149-0</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE (72162-1149-0) </PackageDescription>
    <NDC11Code>72162-1149-00</NDC11Code>
    <ProductNDC>72162-1149</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Allopurinol</ProprietaryName>
    <NonProprietaryName>Allopurinol</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20030627</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075798</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>ALLOPURINOL</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-04-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20030627</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Allopurinol tablets are indicated for: 1 The management of adults with signs and symptoms of primary or secondary gout (acute attacks, tophi, joint destruction, uric acid lithiasis, and/or nephropathy), 2 The management of adult and pediatric patients with leukemia, lymphoma and solid tumor malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels, 3 The management of adult patients with recurrent calcium oxalate calculi whose daily uric acid excretion exceeds 800 mg/day in male patients and 750 mg/day in female patients, despite lifestyle changes (such as reduction of dietary sodium, non-dairy animal protein, oxylate rich foods, refined sugars and increases in oral fluids and fruits and vegetables).</IndicationAndUsage>
    <Description>Allopurinol, USP is a xanthine oxidase inhibitor. It has the following structural formula. Allopurinol, USP is known chemically as 1, 5-dihydro-4H-pyrazolo [3, 4-d]pyrimidin-4-one and it has a molecular weight of 136.1 g/mol. Soluble in solutions of potassium and sodium hydroxides, very slightly soluble in water and in alcohol; practically insoluble in chloroform and in ether. It is a xanthine oxidase inhibitor which is administered orally. Each scored white round-shaped tablet contains 100 mg allopurinol and the inactive ingredients colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate. Each scored orange round-shaped tablet contains 300 mg allopurinol and the inactive ingredients colloidal silicon dioxide, FD&amp;C Yellow No. 6 Lake, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate.</Description>
  </NDC>
  <NDC>
    <NDCCode>72162-1150-0</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE (72162-1150-0) </PackageDescription>
    <NDC11Code>72162-1150-00</NDC11Code>
    <ProductNDC>72162-1150</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Allopurinol</ProprietaryName>
    <NonProprietaryName>Allopurinol</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20030627</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075798</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>ALLOPURINOL</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-04-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20030627</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Allopurinol tablets are indicated for: 1 The management of adults with signs and symptoms of primary or secondary gout (acute attacks, tophi, joint destruction, uric acid lithiasis, and/or nephropathy), 2 The management of adult and pediatric patients with leukemia, lymphoma and solid tumor malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels, 3 The management of adult patients with recurrent calcium oxalate calculi whose daily uric acid excretion exceeds 800 mg/day in male patients and 750 mg/day in female patients, despite lifestyle changes (such as reduction of dietary sodium, non-dairy animal protein, oxylate rich foods, refined sugars and increases in oral fluids and fruits and vegetables).</IndicationAndUsage>
    <Description>Allopurinol, USP is a xanthine oxidase inhibitor. It has the following structural formula. Allopurinol, USP is known chemically as 1, 5-dihydro-4H-pyrazolo [3, 4-d]pyrimidin-4-one and it has a molecular weight of 136.1 g/mol. Soluble in solutions of potassium and sodium hydroxides, very slightly soluble in water and in alcohol; practically insoluble in chloroform and in ether. It is a xanthine oxidase inhibitor which is administered orally. Each scored white round-shaped tablet contains 100 mg allopurinol and the inactive ingredients colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate. Each scored orange round-shaped tablet contains 300 mg allopurinol and the inactive ingredients colloidal silicon dioxide, FD&amp;C Yellow No. 6 Lake, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate.</Description>
  </NDC>
  <NDC>
    <NDCCode>72162-1166-0</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE, PLASTIC (72162-1166-0) </PackageDescription>
    <NDC11Code>72162-1166-00</NDC11Code>
    <ProductNDC>72162-1166</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Phenobarbital</ProprietaryName>
    <NonProprietaryName>Phenobarbital</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20020301</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>PHENOBARBITAL</SubstanceName>
    <StrengthNumber>16.2</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <DEASchedule>CIV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2024-10-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20020301</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sedative. Anticonvulsant – For the treatment of generalized and partial seizures.</IndicationAndUsage>
    <Description>The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline powder that is very slightly soluble in water; soluble in alcohol, in ether, and in solutions of fixed alkali hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5-phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula. Each phenobarbital tablet contains 16.2 mg, 32.4 mg, 64.8 mg or 97.2 mg of phenobarbital. In addition each tablet contains: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate.</Description>
  </NDC>
  <NDC>
    <NDCCode>72162-1167-0</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE, PLASTIC (72162-1167-0) </PackageDescription>
    <NDC11Code>72162-1167-00</NDC11Code>
    <ProductNDC>72162-1167</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Phenobarbital</ProprietaryName>
    <NonProprietaryName>Phenobarbital</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20011201</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>PHENOBARBITAL</SubstanceName>
    <StrengthNumber>64.8</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <DEASchedule>CIV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2024-10-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20011201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sedative. Anticonvulsant – For the treatment of generalized and partial seizures.</IndicationAndUsage>
    <Description>The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline powder that is very slightly soluble in water; soluble in alcohol, in ether, and in solutions of fixed alkali hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5-phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula. Each phenobarbital tablet contains 16.2 mg, 32.4 mg, 64.8 mg or 97.2 mg of phenobarbital. In addition each tablet contains: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate.</Description>
  </NDC>
  <NDC>
    <NDCCode>72162-1168-0</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE, PLASTIC (72162-1168-0) </PackageDescription>
    <NDC11Code>72162-1168-00</NDC11Code>
    <ProductNDC>72162-1168</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Phenobarbital</ProprietaryName>
    <NonProprietaryName>Phenobarbital</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20011201</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>PHENOBARBITAL</SubstanceName>
    <StrengthNumber>97.2</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <DEASchedule>CIV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2024-10-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20011201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sedative. Anticonvulsant – For the treatment of generalized and partial seizures.</IndicationAndUsage>
    <Description>The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline powder that is very slightly soluble in water; soluble in alcohol, in ether, and in solutions of fixed alkali hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5-phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula. Each phenobarbital tablet contains 16.2 mg, 32.4 mg, 64.8 mg or 97.2 mg of phenobarbital. In addition each tablet contains: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate.</Description>
  </NDC>
</NDCList>