{
"NDC": [
{
"NDCCode": "72162-1739-0",
"PackageDescription": "1000 TABLET in 1 BOTTLE (72162-1739-0) ",
"NDC11Code": "72162-1739-00",
"ProductNDC": "72162-1739",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lovastatin",
"NonProprietaryName": "Lovastatin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20021125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075991",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "LOVASTATIN",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-04-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240812",
"SamplePackage": "N",
"IndicationAndUsage": "Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.",
"Description": "Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S -[1α( R *), 3α, 7β, 8β(2 S *,4 S *),8aβ]]-1,2,3, 7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H -pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24 H 36 O 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, pregelatinized starch, sodium starch glycolate, butylated hydroxyanisole and talc. Butylated hydroxyanisole (BHA) is added as a preservative."
},
{
"NDCCode": "45562-1739-0",
"PackageDescription": "20 kg in 1 DRUM (45562-1739-0) ",
"NDC11Code": "45562-1739-00",
"ProductNDC": "45562-1739",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Trimipramine Maleate",
"DosageFormName": "POWDER",
"StartMarketingDate": "20120717",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Lundbeck Pharmaceuticals Italy S.p.A.",
"SubstanceName": "TRIMIPRAMINE MALEATE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2025-12-16",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "17-JUL-12"
},
{
"NDCCode": "50090-1739-0",
"PackageDescription": "20 TABLET, FILM COATED in 1 BOTTLE (50090-1739-0) ",
"NDC11Code": "50090-1739-00",
"ProductNDC": "50090-1739",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefprozil",
"NonProprietaryName": "Cefprozil",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070524",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065340",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "CEFPROZIL",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20150311",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of cefprozil and other antibacterial drugs, cefprozil should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.Cefprozil tablets are indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the conditions listed below:UPPER RESPIRATORY TRACT Pharyngitis/tonsillitis caused by Streptococcus pyogenes. NOTE: The usual drug of choice in the treatment and prevention of streptococcal infections, including the prophylaxis of rheumatic fever, is penicillin given by the intramuscular route. Cefprozil is generally effective in the eradication of Streptococcus pyogenes from the nasopharynx; however, substantial data establishing the efficacy of cefprozil in the subsequent prevention of rheumatic fever are not available at present. Otitis Media caused by Streptococcus pneumoniae, Haemophilus influenzae (including β-lactamase-producing strains), and Moraxella (Branhamella) catarrhalis (including β-lactamase-producing strains). (See CLINICAL STUDIES.) NOTE: In the treatment of otitis media due to β-lactamase producing organisms, cefprozil had bacteriologic eradication rates somewhat lower than those observed with a product containing a specific β-lactamase inhibitor. In considering the use of cefprozil, lower overall eradication rates should be balanced against the susceptibility patterns of the common microbes in a given geographic area and the increased potential for toxicity with products containing β-lactamase inhibitors. Acute Sinusitis caused by Streptococcus pneumoniae, Haemophilus influenzae (including β-lactamase-producing strains), and Moraxella (Branhamella) catarrhalis (including β-lactamase-producing strains). LOWER RESPIRATORY TRACTAcute Bacterial Exacerbation of Chronic Bronchitis caused by Streptococcus pneumoniae, Haemophilus influenzae (including β-lactamase-producing strains), and Moraxella (Branhamella) catarrhalis (including β-lactamase-producing strains). SKIN AND SKIN STRUCTURE Uncomplicated Skin and Skin-Structure Infections caused by Staphylococcus aureus (including penicillinase-producing strains) and Streptococcus pyogenes. Abscesses usually require surgical drainage.",
"Description": "Cefprozil is a semi-synthetic broad-spectrum cephalosporin antibiotic.Cefprozil is a cis and trans isomeric mixture (≥90% cis). The chemical name for the monohydrate is (6R,7R)-7-[(R)-2-Amino-2-(p-hydroxyphenyl)acetamido]-8-oxo-3-propenyl-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid monohydrate, and the structural formula is. Cefprozil USP is a white to yellowish powder with a molecular formula for the monohydrate of C18H19N3O5SH2O and a molecular weight of 407.45. Cefprozil tablets USP are intended for oral administration. Cefprozil tablets USP contain cefprozil USP equivalent to 250 mg or 500 mg of anhydrous cefprozil. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, sodium starch glycolate, magnesium stearate, hypromellose, polyethylene glycol, polysorbate 80, and titanium dioxide. The 250 mg tablets also contain FD&C Yellow #6 aluminum lake. The tablets are imprinted with edible ink containing shellac glaze, black iron oxide, propylene glycol and ammonium hydroxide."
},
{
"NDCCode": "70518-1739-0",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (70518-1739-0) ",
"NDC11Code": "70518-1739-00",
"ProductNDC": "70518-1739",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Perphenazine",
"NonProprietaryName": "Perphenazine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20181217",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205973",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "PERPHENAZINE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phenothiazine [EPC], Phenothiazines [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-11-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20181217",
"SamplePackage": "N"
},
{
"NDCCode": "72162-1739-2",
"PackageDescription": "100 TABLET in 1 BOTTLE (72162-1739-2) ",
"NDC11Code": "72162-1739-02",
"ProductNDC": "72162-1739",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lovastatin",
"NonProprietaryName": "Lovastatin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20021125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075991",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "LOVASTATIN",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-04-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240812",
"SamplePackage": "N",
"IndicationAndUsage": "Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.",
"Description": "Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S -[1α( R *), 3α, 7β, 8β(2 S *,4 S *),8aβ]]-1,2,3, 7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H -pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24 H 36 O 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, pregelatinized starch, sodium starch glycolate, butylated hydroxyanisole and talc. Butylated hydroxyanisole (BHA) is added as a preservative."
},
{
"NDCCode": "72162-1739-4",
"PackageDescription": "300 TABLET in 1 BOTTLE (72162-1739-4) ",
"NDC11Code": "72162-1739-04",
"ProductNDC": "72162-1739",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lovastatin",
"NonProprietaryName": "Lovastatin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20021125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075991",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "LOVASTATIN",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-04-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240812",
"SamplePackage": "N",
"IndicationAndUsage": "Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.",
"Description": "Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S -[1α( R *), 3α, 7β, 8β(2 S *,4 S *),8aβ]]-1,2,3, 7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H -pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24 H 36 O 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, pregelatinized starch, sodium starch glycolate, butylated hydroxyanisole and talc. Butylated hydroxyanisole (BHA) is added as a preservative."
},
{
"NDCCode": "72162-1739-5",
"PackageDescription": "500 TABLET in 1 BOTTLE (72162-1739-5) ",
"NDC11Code": "72162-1739-05",
"ProductNDC": "72162-1739",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lovastatin",
"NonProprietaryName": "Lovastatin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20021125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075991",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "LOVASTATIN",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-04-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240812",
"SamplePackage": "N",
"IndicationAndUsage": "Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.",
"Description": "Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S -[1α( R *), 3α, 7β, 8β(2 S *,4 S *),8aβ]]-1,2,3, 7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H -pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24 H 36 O 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, pregelatinized starch, sodium starch glycolate, butylated hydroxyanisole and talc. Butylated hydroxyanisole (BHA) is added as a preservative."
},
{
"NDCCode": "72162-1739-6",
"PackageDescription": "60 TABLET in 1 BOTTLE (72162-1739-6) ",
"NDC11Code": "72162-1739-06",
"ProductNDC": "72162-1739",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lovastatin",
"NonProprietaryName": "Lovastatin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20021125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075991",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "LOVASTATIN",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-04-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240812",
"SamplePackage": "N",
"IndicationAndUsage": "Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.",
"Description": "Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S -[1α( R *), 3α, 7β, 8β(2 S *,4 S *),8aβ]]-1,2,3, 7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H -pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24 H 36 O 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, pregelatinized starch, sodium starch glycolate, butylated hydroxyanisole and talc. Butylated hydroxyanisole (BHA) is added as a preservative."
},
{
"NDCCode": "72162-1739-7",
"PackageDescription": "120 TABLET in 1 BOTTLE (72162-1739-7) ",
"NDC11Code": "72162-1739-07",
"ProductNDC": "72162-1739",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lovastatin",
"NonProprietaryName": "Lovastatin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20021125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075991",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "LOVASTATIN",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-04-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240812",
"SamplePackage": "N",
"IndicationAndUsage": "Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.",
"Description": "Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S -[1α( R *), 3α, 7β, 8β(2 S *,4 S *),8aβ]]-1,2,3, 7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H -pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24 H 36 O 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, pregelatinized starch, sodium starch glycolate, butylated hydroxyanisole and talc. Butylated hydroxyanisole (BHA) is added as a preservative."
},
{
"NDCCode": "72162-1739-9",
"PackageDescription": "90 TABLET in 1 BOTTLE (72162-1739-9) ",
"NDC11Code": "72162-1739-09",
"ProductNDC": "72162-1739",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lovastatin",
"NonProprietaryName": "Lovastatin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20021125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075991",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "LOVASTATIN",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-04-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240812",
"SamplePackage": "N",
"IndicationAndUsage": "Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.",
"Description": "Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S -[1α( R *), 3α, 7β, 8β(2 S *,4 S *),8aβ]]-1,2,3, 7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H -pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24 H 36 O 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, pregelatinized starch, sodium starch glycolate, butylated hydroxyanisole and talc. Butylated hydroxyanisole (BHA) is added as a preservative."
},
{
"NDCCode": "36987-1739-1",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (36987-1739-1)",
"NDC11Code": "36987-1739-01",
"ProductNDC": "36987-1739",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sesame",
"NonProprietaryName": "Sesame",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "SESAME SEED",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Seed Storage Proteins [CS],Plant Proteins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "36987-1739-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (36987-1739-2)",
"NDC11Code": "36987-1739-02",
"ProductNDC": "36987-1739",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sesame",
"NonProprietaryName": "Sesame",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "SESAME SEED",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Seed Storage Proteins [CS],Plant Proteins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "36987-1739-3",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (36987-1739-3)",
"NDC11Code": "36987-1739-03",
"ProductNDC": "36987-1739",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sesame",
"NonProprietaryName": "Sesame",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "SESAME SEED",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Seed Storage Proteins [CS],Plant Proteins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "36987-1739-4",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (36987-1739-4)",
"NDC11Code": "36987-1739-04",
"ProductNDC": "36987-1739",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sesame",
"NonProprietaryName": "Sesame",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "SESAME SEED",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Seed Storage Proteins [CS],Plant Proteins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "67296-1739-1",
"PackageDescription": "10 CAPSULE in 1 BOTTLE (67296-1739-1) ",
"NDC11Code": "67296-1739-01",
"ProductNDC": "67296-1739",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tamsulosin Hydrochloride",
"NonProprietaryName": "Tamsulosin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20200101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204645",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "TAMSULOSIN HYDROCHLORIDE",
"StrengthNumber": ".4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20200101",
"SamplePackage": "N",
"IndicationAndUsage": "Tamsulosin hydrochloride capsules are indicated for the treatment of the signs and symptoms of benign prostatic hyperplasia (BPH) [see Clinical Studies ( 14)]. Tamsulosin hydrochloride capsules are not indicated for the treatment of hypertension.",
"Description": "Tamsulosin hydrochloride USP is an antagonist of alpha1A adrenoceptors in the prostate. Tamsulosin hydrochloride USP is (-)-(R)-5-[2-[[2-( o-Ethoxyphenoxy) ethyl]amino]propyl]-2-methoxybenzenesulfonamide, monohydrochloride. Tamsulosin hydrochloride USP is a white crystalline powder that melts with decomposition at approximately 230°C. It is sparingly soluble in water and methanol, slightly soluble in glacial acetic acid and ethanol, and practically insoluble in ether. The molecular formula of tamsulosin hydrochloride USP is C 20H 28N 2O 5S HCl. The molecular weight of tamsulosin hydrochloride USP is 444.98. Its structural formula is: Each tamsulosin hydrochloride capsule, USP for oral administration contains tamsulosin hydrochloride USP 0.4 mg, and the following inactive ingredients: polysorbate 80, methacrylic acid copolymer dispersion, triacetin, sodium lauryl sulfate, microcrystalline cellulose and calcium stearate. The capsule shells have the following inactive ingredients: FD & C Blue 2, iron oxide black, iron oxide red, iron oxide yellow, titanium dioxide and gelatin. The black ink has the following inactive ingredients: shellac, propylene glycol, black iron oxide E172 and potassium hydroxide. USP dissolution test pending."
},
{
"NDCCode": "67296-1739-7",
"PackageDescription": "7 CAPSULE in 1 BOTTLE (67296-1739-7) ",
"NDC11Code": "67296-1739-07",
"ProductNDC": "67296-1739",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tamsulosin Hydrochloride",
"NonProprietaryName": "Tamsulosin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20200101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204645",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "TAMSULOSIN HYDROCHLORIDE",
"StrengthNumber": ".4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20200101",
"SamplePackage": "N",
"IndicationAndUsage": "Tamsulosin hydrochloride capsules are indicated for the treatment of the signs and symptoms of benign prostatic hyperplasia (BPH) [see Clinical Studies ( 14)]. Tamsulosin hydrochloride capsules are not indicated for the treatment of hypertension.",
"Description": "Tamsulosin hydrochloride USP is an antagonist of alpha1A adrenoceptors in the prostate. Tamsulosin hydrochloride USP is (-)-(R)-5-[2-[[2-( o-Ethoxyphenoxy) ethyl]amino]propyl]-2-methoxybenzenesulfonamide, monohydrochloride. Tamsulosin hydrochloride USP is a white crystalline powder that melts with decomposition at approximately 230°C. It is sparingly soluble in water and methanol, slightly soluble in glacial acetic acid and ethanol, and practically insoluble in ether. The molecular formula of tamsulosin hydrochloride USP is C 20H 28N 2O 5S HCl. The molecular weight of tamsulosin hydrochloride USP is 444.98. Its structural formula is: Each tamsulosin hydrochloride capsule, USP for oral administration contains tamsulosin hydrochloride USP 0.4 mg, and the following inactive ingredients: polysorbate 80, methacrylic acid copolymer dispersion, triacetin, sodium lauryl sulfate, microcrystalline cellulose and calcium stearate. The capsule shells have the following inactive ingredients: FD & C Blue 2, iron oxide black, iron oxide red, iron oxide yellow, titanium dioxide and gelatin. The black ink has the following inactive ingredients: shellac, propylene glycol, black iron oxide E172 and potassium hydroxide. USP dissolution test pending."
},
{
"NDCCode": "68071-1739-5",
"PackageDescription": "15 mL in 1 BOTTLE (68071-1739-5) ",
"NDC11Code": "68071-1739-05",
"ProductNDC": "68071-1739",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetic Acid",
"NonProprietaryName": "Acetic Acid",
"DosageFormName": "SOLUTION",
"RouteName": "AURICULAR (OTIC)",
"StartMarketingDate": "20100122",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA012179",
"LabelerName": "NuCare Pharmaceuticals,Inc.",
"SubstanceName": "ACETIC ACID",
"StrengthNumber": "20.65",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2024-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180827",
"SamplePackage": "N",
"IndicationAndUsage": "For the treatment of superficial infections of the external auditory canal caused by organisms susceptible to the action of the antimicrobial.",
"Description": "Acetic Acid Otic Solution, USP is a solution of acetic acid (2%) in a propylene glycol vehicle containing propylene glycol diacetate (3%), benzethonium chloride (0.02%), and sodium acetate (0.015%). The empirical formula for acetic acid is CH 3COOH, with a molecular weight of 60.05. The structural formula is:. Acetic Acid is available as a nonaqueous otic solution buffered at pH 3 for use in the external ear canal."
},
{
"NDCCode": "72162-1079-0",
"PackageDescription": "1000 TABLET in 1 BOTTLE, PLASTIC (72162-1079-0) ",
"NDC11Code": "72162-1079-00",
"ProductNDC": "72162-1079",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Baclofen",
"NonProprietaryName": "Baclofen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078220",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "BACLOFEN",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230508",
"SamplePackage": "N",
"IndicationAndUsage": "Baclofen tablets USP are useful for the alleviation of signs and symptoms of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. Patients should have reversible spasticity so that baclofen treatment will aid in restoring residual function. Baclofen tablets USP may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Baclofen tablets USP are not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders. The efficacy of baclofen in stroke, cerebral palsy, and Parkinson's disease has not been established and, therefore, it is not recommended for these conditions.",
"Description": "Baclofen, USP is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl)-butanoic acid. The structural formula is. Baclofen USP is a white to off-white, odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol and insoluble in chloroform. Each tablet, for oral administration, contains 5 mg, 10 mg or 20 mg baclofen. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, and magnesium stearate."
},
{
"NDCCode": "72162-1080-0",
"PackageDescription": "120 TABLET in 1 BOTTLE, PLASTIC (72162-1080-0) ",
"NDC11Code": "72162-1080-00",
"ProductNDC": "72162-1080",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Baclofen",
"NonProprietaryName": "Baclofen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20051220",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077241",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "BACLOFEN",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230508",
"SamplePackage": "N",
"IndicationAndUsage": "Baclofen tablets USP are useful for the alleviation of signs and symptoms of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. Patients should have reversible spasticity so that baclofen treatment will aid in restoring residual function. Baclofen tablets USP may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Baclofen tablets USP are not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders. The efficacy of baclofen in stroke, cerebral palsy, and Parkinson's disease has not been established and, therefore, it is not recommended for these conditions.",
"Description": "Baclofen, USP is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl)-butanoic acid. The structural formula is. Baclofen USP is a white to off-white, odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol and insoluble in chloroform. Each tablet, for oral administration, contains 5 mg, 10 mg or 20 mg baclofen. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, and magnesium stearate."
},
{
"NDCCode": "72162-1081-0",
"PackageDescription": "10 TABLET in 1 BOTTLE, PLASTIC (72162-1081-0) ",
"NDC11Code": "72162-1081-00",
"ProductNDC": "72162-1081",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydromorphone Hydrochloride",
"NonProprietaryName": "Hydromorphone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091209",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077471",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "HYDROMORPHONE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2025-07-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20230508",
"SamplePackage": "N",
"IndicationAndUsage": "Hydromorphone hydrochloride tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see Warnings and Precautions (5.2)], reserve hydromorphone hydrochloride tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia."
},
{
"NDCCode": "72162-1090-0",
"PackageDescription": "1000 TABLET in 1 BOTTLE (72162-1090-0) ",
"NDC11Code": "72162-1090-00",
"ProductNDC": "72162-1090",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levothyroxine Sodium",
"NonProprietaryName": "Levothyroxine Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200803",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA021342",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "LEVOTHYROXINE SODIUM",
"StrengthNumber": "88",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Thyroxine [CS], l-Thyroxine [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200803",
"SamplePackage": "N",
"IndicationAndUsage": "Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary) and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)]. Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.",
"Description": "Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'- tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O (where x = 5), molecular weight of 798.86 g/mol (anhydrous) and structural formula as shown. Levothyroxine sodium tablets for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients Magnesium Stearate, NF; Microcrystalline Cellulose, NF; Colloidal Silicone Dioxide, NF; and Sodium Starch Glycolate, NF. Each tablet strength meets USP Dissolution Test 2. Table 6 provides a listing of the color additives by tablet strength. Table 6. Levothyroxine Sodium Tablets Color Additives."
},
{
"NDCCode": "72162-1091-0",
"PackageDescription": "1000 TABLET in 1 BOTTLE (72162-1091-0) ",
"NDC11Code": "72162-1091-00",
"ProductNDC": "72162-1091",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levothyroxine Sodium",
"NonProprietaryName": "Levothyroxine Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200803",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA021342",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "LEVOTHYROXINE SODIUM",
"StrengthNumber": "112",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Thyroxine [CS], l-Thyroxine [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200803",
"SamplePackage": "N",
"IndicationAndUsage": "Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary) and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)]. Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.",
"Description": "Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'- tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O (where x = 5), molecular weight of 798.86 g/mol (anhydrous) and structural formula as shown. Levothyroxine sodium tablets for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients Magnesium Stearate, NF; Microcrystalline Cellulose, NF; Colloidal Silicone Dioxide, NF; and Sodium Starch Glycolate, NF. Each tablet strength meets USP Dissolution Test 2. Table 6 provides a listing of the color additives by tablet strength. Table 6. Levothyroxine Sodium Tablets Color Additives."
},
{
"NDCCode": "72162-1092-0",
"PackageDescription": "1000 TABLET in 1 BOTTLE (72162-1092-0) ",
"NDC11Code": "72162-1092-00",
"ProductNDC": "72162-1092",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levothyroxine Sodium",
"NonProprietaryName": "Levothyroxine Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200803",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA021342",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "LEVOTHYROXINE SODIUM",
"StrengthNumber": "137",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Thyroxine [CS], l-Thyroxine [EPC]",
"Status": "Active",
"LastUpdate": "2024-04-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200803",
"SamplePackage": "N",
"IndicationAndUsage": "Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary) and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)]. Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.",
"Description": "Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'- tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O (where x = 5), molecular weight of 798.86 g/mol (anhydrous) and structural formula as shown. Levothyroxine sodium tablets for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients Magnesium Stearate, NF; Microcrystalline Cellulose, NF; Colloidal Silicone Dioxide, NF; and Sodium Starch Glycolate, NF. Each tablet strength meets USP Dissolution Test 2. Table 6 provides a listing of the color additives by tablet strength. Table 6. Levothyroxine Sodium Tablets Color Additives."
},
{
"NDCCode": "72162-1093-0",
"PackageDescription": "1000 TABLET in 1 BOTTLE (72162-1093-0) ",
"NDC11Code": "72162-1093-00",
"ProductNDC": "72162-1093",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levothyroxine Sodium",
"NonProprietaryName": "Levothyroxine Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200803",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA021342",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "LEVOTHYROXINE SODIUM",
"StrengthNumber": "175",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Thyroxine [CS], l-Thyroxine [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200803",
"SamplePackage": "N",
"IndicationAndUsage": "Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary) and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)]. Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.",
"Description": "Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'- tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O (where x = 5), molecular weight of 798.86 g/mol (anhydrous) and structural formula as shown. Levothyroxine sodium tablets for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients Magnesium Stearate, NF; Microcrystalline Cellulose, NF; Colloidal Silicone Dioxide, NF; and Sodium Starch Glycolate, NF. Each tablet strength meets USP Dissolution Test 2. Table 6 provides a listing of the color additives by tablet strength. Table 6. Levothyroxine Sodium Tablets Color Additives."
},
{
"NDCCode": "72162-1094-0",
"PackageDescription": "1000 TABLET in 1 BOTTLE (72162-1094-0) ",
"NDC11Code": "72162-1094-00",
"ProductNDC": "72162-1094",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levothyroxine Sodium",
"NonProprietaryName": "Levothyroxine Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200803",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA021342",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "LEVOTHYROXINE SODIUM",
"StrengthNumber": "200",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Thyroxine [CS], l-Thyroxine [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200803",
"SamplePackage": "N",
"IndicationAndUsage": "Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary) and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)]. Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.",
"Description": "Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'- tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O (where x = 5), molecular weight of 798.86 g/mol (anhydrous) and structural formula as shown. Levothyroxine sodium tablets for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients Magnesium Stearate, NF; Microcrystalline Cellulose, NF; Colloidal Silicone Dioxide, NF; and Sodium Starch Glycolate, NF. Each tablet strength meets USP Dissolution Test 2. Table 6 provides a listing of the color additives by tablet strength. Table 6. Levothyroxine Sodium Tablets Color Additives."
},
{
"NDCCode": "72162-1095-0",
"PackageDescription": "1000 TABLET in 1 BOTTLE (72162-1095-0) ",
"NDC11Code": "72162-1095-00",
"ProductNDC": "72162-1095",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levothyroxine Sodium",
"NonProprietaryName": "Levothyroxine Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200803",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA021342",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "LEVOTHYROXINE SODIUM",
"StrengthNumber": "300",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Thyroxine [CS], l-Thyroxine [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200803",
"SamplePackage": "N",
"IndicationAndUsage": "Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary) and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)]. Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.",
"Description": "Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'- tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O (where x = 5), molecular weight of 798.86 g/mol (anhydrous) and structural formula as shown. Levothyroxine sodium tablets for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients Magnesium Stearate, NF; Microcrystalline Cellulose, NF; Colloidal Silicone Dioxide, NF; and Sodium Starch Glycolate, NF. Each tablet strength meets USP Dissolution Test 2. Table 6 provides a listing of the color additives by tablet strength. Table 6. Levothyroxine Sodium Tablets Color Additives."
},
{
"NDCCode": "72162-1149-0",
"PackageDescription": "1000 TABLET in 1 BOTTLE (72162-1149-0) ",
"NDC11Code": "72162-1149-00",
"ProductNDC": "72162-1149",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Allopurinol",
"NonProprietaryName": "Allopurinol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20030627",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075798",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ALLOPURINOL",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-04-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20030627",
"SamplePackage": "N",
"IndicationAndUsage": "Allopurinol tablets are indicated for: 1 The management of adults with signs and symptoms of primary or secondary gout (acute attacks, tophi, joint destruction, uric acid lithiasis, and/or nephropathy), 2 The management of adult and pediatric patients with leukemia, lymphoma and solid tumor malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels, 3 The management of adult patients with recurrent calcium oxalate calculi whose daily uric acid excretion exceeds 800 mg/day in male patients and 750 mg/day in female patients, despite lifestyle changes (such as reduction of dietary sodium, non-dairy animal protein, oxylate rich foods, refined sugars and increases in oral fluids and fruits and vegetables).",
"Description": "Allopurinol, USP is a xanthine oxidase inhibitor. It has the following structural formula. Allopurinol, USP is known chemically as 1, 5-dihydro-4H-pyrazolo [3, 4-d]pyrimidin-4-one and it has a molecular weight of 136.1 g/mol. Soluble in solutions of potassium and sodium hydroxides, very slightly soluble in water and in alcohol; practically insoluble in chloroform and in ether. It is a xanthine oxidase inhibitor which is administered orally. Each scored white round-shaped tablet contains 100 mg allopurinol and the inactive ingredients colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate. Each scored orange round-shaped tablet contains 300 mg allopurinol and the inactive ingredients colloidal silicon dioxide, FD&C Yellow No. 6 Lake, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate."
},
{
"NDCCode": "72162-1150-0",
"PackageDescription": "1000 TABLET in 1 BOTTLE (72162-1150-0) ",
"NDC11Code": "72162-1150-00",
"ProductNDC": "72162-1150",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Allopurinol",
"NonProprietaryName": "Allopurinol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20030627",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075798",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ALLOPURINOL",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-04-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20030627",
"SamplePackage": "N",
"IndicationAndUsage": "Allopurinol tablets are indicated for: 1 The management of adults with signs and symptoms of primary or secondary gout (acute attacks, tophi, joint destruction, uric acid lithiasis, and/or nephropathy), 2 The management of adult and pediatric patients with leukemia, lymphoma and solid tumor malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels, 3 The management of adult patients with recurrent calcium oxalate calculi whose daily uric acid excretion exceeds 800 mg/day in male patients and 750 mg/day in female patients, despite lifestyle changes (such as reduction of dietary sodium, non-dairy animal protein, oxylate rich foods, refined sugars and increases in oral fluids and fruits and vegetables).",
"Description": "Allopurinol, USP is a xanthine oxidase inhibitor. It has the following structural formula. Allopurinol, USP is known chemically as 1, 5-dihydro-4H-pyrazolo [3, 4-d]pyrimidin-4-one and it has a molecular weight of 136.1 g/mol. Soluble in solutions of potassium and sodium hydroxides, very slightly soluble in water and in alcohol; practically insoluble in chloroform and in ether. It is a xanthine oxidase inhibitor which is administered orally. Each scored white round-shaped tablet contains 100 mg allopurinol and the inactive ingredients colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate. Each scored orange round-shaped tablet contains 300 mg allopurinol and the inactive ingredients colloidal silicon dioxide, FD&C Yellow No. 6 Lake, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate."
},
{
"NDCCode": "72162-1166-0",
"PackageDescription": "1000 TABLET in 1 BOTTLE, PLASTIC (72162-1166-0) ",
"NDC11Code": "72162-1166-00",
"ProductNDC": "72162-1166",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenobarbital",
"NonProprietaryName": "Phenobarbital",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20020301",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "PHENOBARBITAL",
"StrengthNumber": "16.2",
"StrengthUnit": "mg/1",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2024-10-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20020301",
"SamplePackage": "N",
"IndicationAndUsage": "Sedative. Anticonvulsant – For the treatment of generalized and partial seizures.",
"Description": "The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline powder that is very slightly soluble in water; soluble in alcohol, in ether, and in solutions of fixed alkali hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5-phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula. Each phenobarbital tablet contains 16.2 mg, 32.4 mg, 64.8 mg or 97.2 mg of phenobarbital. In addition each tablet contains: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate."
},
{
"NDCCode": "72162-1167-0",
"PackageDescription": "1000 TABLET in 1 BOTTLE, PLASTIC (72162-1167-0) ",
"NDC11Code": "72162-1167-00",
"ProductNDC": "72162-1167",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenobarbital",
"NonProprietaryName": "Phenobarbital",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20011201",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "PHENOBARBITAL",
"StrengthNumber": "64.8",
"StrengthUnit": "mg/1",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2024-10-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20011201",
"SamplePackage": "N",
"IndicationAndUsage": "Sedative. Anticonvulsant – For the treatment of generalized and partial seizures.",
"Description": "The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline powder that is very slightly soluble in water; soluble in alcohol, in ether, and in solutions of fixed alkali hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5-phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula. Each phenobarbital tablet contains 16.2 mg, 32.4 mg, 64.8 mg or 97.2 mg of phenobarbital. In addition each tablet contains: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>72162-1739-0</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (72162-1739-0) </PackageDescription>
<NDC11Code>72162-1739-00</NDC11Code>
<ProductNDC>72162-1739</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lovastatin</ProprietaryName>
<NonProprietaryName>Lovastatin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20021125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075991</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>LOVASTATIN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240812</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.</IndicationAndUsage>
<Description>Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S -[1α( R *), 3α, 7β, 8β(2 S *,4 S *),8aβ]]-1,2,3, 7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H -pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24 H 36 O 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, pregelatinized starch, sodium starch glycolate, butylated hydroxyanisole and talc. Butylated hydroxyanisole (BHA) is added as a preservative.</Description>
</NDC>
<NDC>
<NDCCode>45562-1739-0</NDCCode>
<PackageDescription>20 kg in 1 DRUM (45562-1739-0) </PackageDescription>
<NDC11Code>45562-1739-00</NDC11Code>
<ProductNDC>45562-1739</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Trimipramine Maleate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20120717</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Lundbeck Pharmaceuticals Italy S.p.A.</LabelerName>
<SubstanceName>TRIMIPRAMINE MALEATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-12-16</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>17-JUL-12</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>50090-1739-0</NDCCode>
<PackageDescription>20 TABLET, FILM COATED in 1 BOTTLE (50090-1739-0) </PackageDescription>
<NDC11Code>50090-1739-00</NDC11Code>
<ProductNDC>50090-1739</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefprozil</ProprietaryName>
<NonProprietaryName>Cefprozil</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070524</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065340</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>CEFPROZIL</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150311</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of cefprozil and other antibacterial drugs, cefprozil should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.Cefprozil tablets are indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the conditions listed below:UPPER RESPIRATORY TRACT Pharyngitis/tonsillitis caused by Streptococcus pyogenes. NOTE: The usual drug of choice in the treatment and prevention of streptococcal infections, including the prophylaxis of rheumatic fever, is penicillin given by the intramuscular route. Cefprozil is generally effective in the eradication of Streptococcus pyogenes from the nasopharynx; however, substantial data establishing the efficacy of cefprozil in the subsequent prevention of rheumatic fever are not available at present. Otitis Media caused by Streptococcus pneumoniae, Haemophilus influenzae (including β-lactamase-producing strains), and Moraxella (Branhamella) catarrhalis (including β-lactamase-producing strains). (See CLINICAL STUDIES.) NOTE: In the treatment of otitis media due to β-lactamase producing organisms, cefprozil had bacteriologic eradication rates somewhat lower than those observed with a product containing a specific β-lactamase inhibitor. In considering the use of cefprozil, lower overall eradication rates should be balanced against the susceptibility patterns of the common microbes in a given geographic area and the increased potential for toxicity with products containing β-lactamase inhibitors. Acute Sinusitis caused by Streptococcus pneumoniae, Haemophilus influenzae (including β-lactamase-producing strains), and Moraxella (Branhamella) catarrhalis (including β-lactamase-producing strains). LOWER RESPIRATORY TRACTAcute Bacterial Exacerbation of Chronic Bronchitis caused by Streptococcus pneumoniae, Haemophilus influenzae (including β-lactamase-producing strains), and Moraxella (Branhamella) catarrhalis (including β-lactamase-producing strains). SKIN AND SKIN STRUCTURE Uncomplicated Skin and Skin-Structure Infections caused by Staphylococcus aureus (including penicillinase-producing strains) and Streptococcus pyogenes. Abscesses usually require surgical drainage.</IndicationAndUsage>
<Description>Cefprozil is a semi-synthetic broad-spectrum cephalosporin antibiotic.Cefprozil is a cis and trans isomeric mixture (≥90% cis). The chemical name for the monohydrate is (6R,7R)-7-[(R)-2-Amino-2-(p-hydroxyphenyl)acetamido]-8-oxo-3-propenyl-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid monohydrate, and the structural formula is. Cefprozil USP is a white to yellowish powder with a molecular formula for the monohydrate of C18H19N3O5SH2O and a molecular weight of 407.45. Cefprozil tablets USP are intended for oral administration. Cefprozil tablets USP contain cefprozil USP equivalent to 250 mg or 500 mg of anhydrous cefprozil. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, sodium starch glycolate, magnesium stearate, hypromellose, polyethylene glycol, polysorbate 80, and titanium dioxide. The 250 mg tablets also contain FD&C Yellow #6 aluminum lake. The tablets are imprinted with edible ink containing shellac glaze, black iron oxide, propylene glycol and ammonium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>70518-1739-0</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (70518-1739-0) </PackageDescription>
<NDC11Code>70518-1739-00</NDC11Code>
<ProductNDC>70518-1739</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Perphenazine</ProprietaryName>
<NonProprietaryName>Perphenazine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181217</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205973</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>PERPHENAZINE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC], Phenothiazines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-11-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181217</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>72162-1739-2</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (72162-1739-2) </PackageDescription>
<NDC11Code>72162-1739-02</NDC11Code>
<ProductNDC>72162-1739</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lovastatin</ProprietaryName>
<NonProprietaryName>Lovastatin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20021125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075991</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>LOVASTATIN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240812</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.</IndicationAndUsage>
<Description>Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S -[1α( R *), 3α, 7β, 8β(2 S *,4 S *),8aβ]]-1,2,3, 7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H -pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24 H 36 O 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, pregelatinized starch, sodium starch glycolate, butylated hydroxyanisole and talc. Butylated hydroxyanisole (BHA) is added as a preservative.</Description>
</NDC>
<NDC>
<NDCCode>72162-1739-4</NDCCode>
<PackageDescription>300 TABLET in 1 BOTTLE (72162-1739-4) </PackageDescription>
<NDC11Code>72162-1739-04</NDC11Code>
<ProductNDC>72162-1739</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lovastatin</ProprietaryName>
<NonProprietaryName>Lovastatin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20021125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075991</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>LOVASTATIN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240812</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.</IndicationAndUsage>
<Description>Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S -[1α( R *), 3α, 7β, 8β(2 S *,4 S *),8aβ]]-1,2,3, 7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H -pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24 H 36 O 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, pregelatinized starch, sodium starch glycolate, butylated hydroxyanisole and talc. Butylated hydroxyanisole (BHA) is added as a preservative.</Description>
</NDC>
<NDC>
<NDCCode>72162-1739-5</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (72162-1739-5) </PackageDescription>
<NDC11Code>72162-1739-05</NDC11Code>
<ProductNDC>72162-1739</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lovastatin</ProprietaryName>
<NonProprietaryName>Lovastatin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20021125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075991</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>LOVASTATIN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240812</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.</IndicationAndUsage>
<Description>Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S -[1α( R *), 3α, 7β, 8β(2 S *,4 S *),8aβ]]-1,2,3, 7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H -pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24 H 36 O 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, pregelatinized starch, sodium starch glycolate, butylated hydroxyanisole and talc. Butylated hydroxyanisole (BHA) is added as a preservative.</Description>
</NDC>
<NDC>
<NDCCode>72162-1739-6</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (72162-1739-6) </PackageDescription>
<NDC11Code>72162-1739-06</NDC11Code>
<ProductNDC>72162-1739</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lovastatin</ProprietaryName>
<NonProprietaryName>Lovastatin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20021125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075991</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>LOVASTATIN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240812</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.</IndicationAndUsage>
<Description>Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S -[1α( R *), 3α, 7β, 8β(2 S *,4 S *),8aβ]]-1,2,3, 7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H -pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24 H 36 O 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, pregelatinized starch, sodium starch glycolate, butylated hydroxyanisole and talc. Butylated hydroxyanisole (BHA) is added as a preservative.</Description>
</NDC>
<NDC>
<NDCCode>72162-1739-7</NDCCode>
<PackageDescription>120 TABLET in 1 BOTTLE (72162-1739-7) </PackageDescription>
<NDC11Code>72162-1739-07</NDC11Code>
<ProductNDC>72162-1739</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lovastatin</ProprietaryName>
<NonProprietaryName>Lovastatin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20021125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075991</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>LOVASTATIN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240812</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.</IndicationAndUsage>
<Description>Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S -[1α( R *), 3α, 7β, 8β(2 S *,4 S *),8aβ]]-1,2,3, 7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H -pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24 H 36 O 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, pregelatinized starch, sodium starch glycolate, butylated hydroxyanisole and talc. Butylated hydroxyanisole (BHA) is added as a preservative.</Description>
</NDC>
<NDC>
<NDCCode>72162-1739-9</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (72162-1739-9) </PackageDescription>
<NDC11Code>72162-1739-09</NDC11Code>
<ProductNDC>72162-1739</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lovastatin</ProprietaryName>
<NonProprietaryName>Lovastatin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20021125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075991</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>LOVASTATIN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240812</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.</IndicationAndUsage>
<Description>Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S -[1α( R *), 3α, 7β, 8β(2 S *,4 S *),8aβ]]-1,2,3, 7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H -pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24 H 36 O 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, pregelatinized starch, sodium starch glycolate, butylated hydroxyanisole and talc. Butylated hydroxyanisole (BHA) is added as a preservative.</Description>
</NDC>
<NDC>
<NDCCode>36987-1739-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (36987-1739-1)</PackageDescription>
<NDC11Code>36987-1739-01</NDC11Code>
<ProductNDC>36987-1739</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sesame</ProprietaryName>
<NonProprietaryName>Sesame</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>SESAME SEED</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Seed Storage Proteins [CS],Plant Proteins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>36987-1739-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (36987-1739-2)</PackageDescription>
<NDC11Code>36987-1739-02</NDC11Code>
<ProductNDC>36987-1739</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sesame</ProprietaryName>
<NonProprietaryName>Sesame</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>SESAME SEED</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Seed Storage Proteins [CS],Plant Proteins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>36987-1739-3</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (36987-1739-3)</PackageDescription>
<NDC11Code>36987-1739-03</NDC11Code>
<ProductNDC>36987-1739</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sesame</ProprietaryName>
<NonProprietaryName>Sesame</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>SESAME SEED</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Seed Storage Proteins [CS],Plant Proteins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>36987-1739-4</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (36987-1739-4)</PackageDescription>
<NDC11Code>36987-1739-04</NDC11Code>
<ProductNDC>36987-1739</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sesame</ProprietaryName>
<NonProprietaryName>Sesame</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>SESAME SEED</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Seed Storage Proteins [CS],Plant Proteins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>67296-1739-1</NDCCode>
<PackageDescription>10 CAPSULE in 1 BOTTLE (67296-1739-1) </PackageDescription>
<NDC11Code>67296-1739-01</NDC11Code>
<ProductNDC>67296-1739</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tamsulosin Hydrochloride</ProprietaryName>
<NonProprietaryName>Tamsulosin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204645</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>TAMSULOSIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tamsulosin hydrochloride capsules are indicated for the treatment of the signs and symptoms of benign prostatic hyperplasia (BPH) [see Clinical Studies ( 14)]. Tamsulosin hydrochloride capsules are not indicated for the treatment of hypertension.</IndicationAndUsage>
<Description>Tamsulosin hydrochloride USP is an antagonist of alpha1A adrenoceptors in the prostate. Tamsulosin hydrochloride USP is (-)-(R)-5-[2-[[2-( o-Ethoxyphenoxy) ethyl]amino]propyl]-2-methoxybenzenesulfonamide, monohydrochloride. Tamsulosin hydrochloride USP is a white crystalline powder that melts with decomposition at approximately 230°C. It is sparingly soluble in water and methanol, slightly soluble in glacial acetic acid and ethanol, and practically insoluble in ether. The molecular formula of tamsulosin hydrochloride USP is C 20H 28N 2O 5S HCl. The molecular weight of tamsulosin hydrochloride USP is 444.98. Its structural formula is: Each tamsulosin hydrochloride capsule, USP for oral administration contains tamsulosin hydrochloride USP 0.4 mg, and the following inactive ingredients: polysorbate 80, methacrylic acid copolymer dispersion, triacetin, sodium lauryl sulfate, microcrystalline cellulose and calcium stearate. The capsule shells have the following inactive ingredients: FD & C Blue 2, iron oxide black, iron oxide red, iron oxide yellow, titanium dioxide and gelatin. The black ink has the following inactive ingredients: shellac, propylene glycol, black iron oxide E172 and potassium hydroxide. USP dissolution test pending.</Description>
</NDC>
<NDC>
<NDCCode>67296-1739-7</NDCCode>
<PackageDescription>7 CAPSULE in 1 BOTTLE (67296-1739-7) </PackageDescription>
<NDC11Code>67296-1739-07</NDC11Code>
<ProductNDC>67296-1739</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tamsulosin Hydrochloride</ProprietaryName>
<NonProprietaryName>Tamsulosin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204645</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>TAMSULOSIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tamsulosin hydrochloride capsules are indicated for the treatment of the signs and symptoms of benign prostatic hyperplasia (BPH) [see Clinical Studies ( 14)]. Tamsulosin hydrochloride capsules are not indicated for the treatment of hypertension.</IndicationAndUsage>
<Description>Tamsulosin hydrochloride USP is an antagonist of alpha1A adrenoceptors in the prostate. Tamsulosin hydrochloride USP is (-)-(R)-5-[2-[[2-( o-Ethoxyphenoxy) ethyl]amino]propyl]-2-methoxybenzenesulfonamide, monohydrochloride. Tamsulosin hydrochloride USP is a white crystalline powder that melts with decomposition at approximately 230°C. It is sparingly soluble in water and methanol, slightly soluble in glacial acetic acid and ethanol, and practically insoluble in ether. The molecular formula of tamsulosin hydrochloride USP is C 20H 28N 2O 5S HCl. The molecular weight of tamsulosin hydrochloride USP is 444.98. Its structural formula is: Each tamsulosin hydrochloride capsule, USP for oral administration contains tamsulosin hydrochloride USP 0.4 mg, and the following inactive ingredients: polysorbate 80, methacrylic acid copolymer dispersion, triacetin, sodium lauryl sulfate, microcrystalline cellulose and calcium stearate. The capsule shells have the following inactive ingredients: FD & C Blue 2, iron oxide black, iron oxide red, iron oxide yellow, titanium dioxide and gelatin. The black ink has the following inactive ingredients: shellac, propylene glycol, black iron oxide E172 and potassium hydroxide. USP dissolution test pending.</Description>
</NDC>
<NDC>
<NDCCode>68071-1739-5</NDCCode>
<PackageDescription>15 mL in 1 BOTTLE (68071-1739-5) </PackageDescription>
<NDC11Code>68071-1739-05</NDC11Code>
<ProductNDC>68071-1739</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetic Acid</ProprietaryName>
<NonProprietaryName>Acetic Acid</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>AURICULAR (OTIC)</RouteName>
<StartMarketingDate>20100122</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA012179</ApplicationNumber>
<LabelerName>NuCare Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>ACETIC ACID</SubstanceName>
<StrengthNumber>20.65</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180827</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the treatment of superficial infections of the external auditory canal caused by organisms susceptible to the action of the antimicrobial.</IndicationAndUsage>
<Description>Acetic Acid Otic Solution, USP is a solution of acetic acid (2%) in a propylene glycol vehicle containing propylene glycol diacetate (3%), benzethonium chloride (0.02%), and sodium acetate (0.015%). The empirical formula for acetic acid is CH 3COOH, with a molecular weight of 60.05. The structural formula is:. Acetic Acid is available as a nonaqueous otic solution buffered at pH 3 for use in the external ear canal.</Description>
</NDC>
<NDC>
<NDCCode>72162-1079-0</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE, PLASTIC (72162-1079-0) </PackageDescription>
<NDC11Code>72162-1079-00</NDC11Code>
<ProductNDC>72162-1079</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Baclofen</ProprietaryName>
<NonProprietaryName>Baclofen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078220</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>BACLOFEN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230508</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Baclofen tablets USP are useful for the alleviation of signs and symptoms of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. Patients should have reversible spasticity so that baclofen treatment will aid in restoring residual function. Baclofen tablets USP may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Baclofen tablets USP are not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders. The efficacy of baclofen in stroke, cerebral palsy, and Parkinson's disease has not been established and, therefore, it is not recommended for these conditions.</IndicationAndUsage>
<Description>Baclofen, USP is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl)-butanoic acid. The structural formula is. Baclofen USP is a white to off-white, odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol and insoluble in chloroform. Each tablet, for oral administration, contains 5 mg, 10 mg or 20 mg baclofen. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>72162-1080-0</NDCCode>
<PackageDescription>120 TABLET in 1 BOTTLE, PLASTIC (72162-1080-0) </PackageDescription>
<NDC11Code>72162-1080-00</NDC11Code>
<ProductNDC>72162-1080</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Baclofen</ProprietaryName>
<NonProprietaryName>Baclofen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20051220</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077241</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>BACLOFEN</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230508</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Baclofen tablets USP are useful for the alleviation of signs and symptoms of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. Patients should have reversible spasticity so that baclofen treatment will aid in restoring residual function. Baclofen tablets USP may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Baclofen tablets USP are not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders. The efficacy of baclofen in stroke, cerebral palsy, and Parkinson's disease has not been established and, therefore, it is not recommended for these conditions.</IndicationAndUsage>
<Description>Baclofen, USP is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl)-butanoic acid. The structural formula is. Baclofen USP is a white to off-white, odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol and insoluble in chloroform. Each tablet, for oral administration, contains 5 mg, 10 mg or 20 mg baclofen. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>72162-1081-0</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE, PLASTIC (72162-1081-0) </PackageDescription>
<NDC11Code>72162-1081-00</NDC11Code>
<ProductNDC>72162-1081</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydromorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091209</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077471</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2025-07-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230508</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydromorphone hydrochloride tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see Warnings and Precautions (5.2)], reserve hydromorphone hydrochloride tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>72162-1090-0</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (72162-1090-0) </PackageDescription>
<NDC11Code>72162-1090-00</NDC11Code>
<ProductNDC>72162-1090</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levothyroxine Sodium</ProprietaryName>
<NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200803</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA021342</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
<StrengthNumber>88</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200803</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary) and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)]. Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
<Description>Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'- tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O (where x = 5), molecular weight of 798.86 g/mol (anhydrous) and structural formula as shown. Levothyroxine sodium tablets for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients Magnesium Stearate, NF; Microcrystalline Cellulose, NF; Colloidal Silicone Dioxide, NF; and Sodium Starch Glycolate, NF. Each tablet strength meets USP Dissolution Test 2. Table 6 provides a listing of the color additives by tablet strength. Table 6. Levothyroxine Sodium Tablets Color Additives.</Description>
</NDC>
<NDC>
<NDCCode>72162-1091-0</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (72162-1091-0) </PackageDescription>
<NDC11Code>72162-1091-00</NDC11Code>
<ProductNDC>72162-1091</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levothyroxine Sodium</ProprietaryName>
<NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200803</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA021342</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
<StrengthNumber>112</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200803</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary) and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)]. Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
<Description>Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'- tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O (where x = 5), molecular weight of 798.86 g/mol (anhydrous) and structural formula as shown. Levothyroxine sodium tablets for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients Magnesium Stearate, NF; Microcrystalline Cellulose, NF; Colloidal Silicone Dioxide, NF; and Sodium Starch Glycolate, NF. Each tablet strength meets USP Dissolution Test 2. Table 6 provides a listing of the color additives by tablet strength. Table 6. Levothyroxine Sodium Tablets Color Additives.</Description>
</NDC>
<NDC>
<NDCCode>72162-1092-0</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (72162-1092-0) </PackageDescription>
<NDC11Code>72162-1092-00</NDC11Code>
<ProductNDC>72162-1092</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levothyroxine Sodium</ProprietaryName>
<NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200803</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA021342</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
<StrengthNumber>137</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200803</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary) and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)]. Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
<Description>Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'- tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O (where x = 5), molecular weight of 798.86 g/mol (anhydrous) and structural formula as shown. Levothyroxine sodium tablets for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients Magnesium Stearate, NF; Microcrystalline Cellulose, NF; Colloidal Silicone Dioxide, NF; and Sodium Starch Glycolate, NF. Each tablet strength meets USP Dissolution Test 2. Table 6 provides a listing of the color additives by tablet strength. Table 6. Levothyroxine Sodium Tablets Color Additives.</Description>
</NDC>
<NDC>
<NDCCode>72162-1093-0</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (72162-1093-0) </PackageDescription>
<NDC11Code>72162-1093-00</NDC11Code>
<ProductNDC>72162-1093</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levothyroxine Sodium</ProprietaryName>
<NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200803</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA021342</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
<StrengthNumber>175</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200803</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary) and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)]. Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
<Description>Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'- tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O (where x = 5), molecular weight of 798.86 g/mol (anhydrous) and structural formula as shown. Levothyroxine sodium tablets for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients Magnesium Stearate, NF; Microcrystalline Cellulose, NF; Colloidal Silicone Dioxide, NF; and Sodium Starch Glycolate, NF. Each tablet strength meets USP Dissolution Test 2. Table 6 provides a listing of the color additives by tablet strength. Table 6. Levothyroxine Sodium Tablets Color Additives.</Description>
</NDC>
<NDC>
<NDCCode>72162-1094-0</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (72162-1094-0) </PackageDescription>
<NDC11Code>72162-1094-00</NDC11Code>
<ProductNDC>72162-1094</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levothyroxine Sodium</ProprietaryName>
<NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200803</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA021342</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200803</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary) and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)]. Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
<Description>Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'- tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O (where x = 5), molecular weight of 798.86 g/mol (anhydrous) and structural formula as shown. Levothyroxine sodium tablets for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients Magnesium Stearate, NF; Microcrystalline Cellulose, NF; Colloidal Silicone Dioxide, NF; and Sodium Starch Glycolate, NF. Each tablet strength meets USP Dissolution Test 2. Table 6 provides a listing of the color additives by tablet strength. Table 6. Levothyroxine Sodium Tablets Color Additives.</Description>
</NDC>
<NDC>
<NDCCode>72162-1095-0</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (72162-1095-0) </PackageDescription>
<NDC11Code>72162-1095-00</NDC11Code>
<ProductNDC>72162-1095</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levothyroxine Sodium</ProprietaryName>
<NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200803</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA021342</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200803</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary) and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)]. Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
<Description>Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'- tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O (where x = 5), molecular weight of 798.86 g/mol (anhydrous) and structural formula as shown. Levothyroxine sodium tablets for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients Magnesium Stearate, NF; Microcrystalline Cellulose, NF; Colloidal Silicone Dioxide, NF; and Sodium Starch Glycolate, NF. Each tablet strength meets USP Dissolution Test 2. Table 6 provides a listing of the color additives by tablet strength. Table 6. Levothyroxine Sodium Tablets Color Additives.</Description>
</NDC>
<NDC>
<NDCCode>72162-1149-0</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (72162-1149-0) </PackageDescription>
<NDC11Code>72162-1149-00</NDC11Code>
<ProductNDC>72162-1149</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Allopurinol</ProprietaryName>
<NonProprietaryName>Allopurinol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20030627</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075798</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ALLOPURINOL</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20030627</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allopurinol tablets are indicated for: 1 The management of adults with signs and symptoms of primary or secondary gout (acute attacks, tophi, joint destruction, uric acid lithiasis, and/or nephropathy), 2 The management of adult and pediatric patients with leukemia, lymphoma and solid tumor malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels, 3 The management of adult patients with recurrent calcium oxalate calculi whose daily uric acid excretion exceeds 800 mg/day in male patients and 750 mg/day in female patients, despite lifestyle changes (such as reduction of dietary sodium, non-dairy animal protein, oxylate rich foods, refined sugars and increases in oral fluids and fruits and vegetables).</IndicationAndUsage>
<Description>Allopurinol, USP is a xanthine oxidase inhibitor. It has the following structural formula. Allopurinol, USP is known chemically as 1, 5-dihydro-4H-pyrazolo [3, 4-d]pyrimidin-4-one and it has a molecular weight of 136.1 g/mol. Soluble in solutions of potassium and sodium hydroxides, very slightly soluble in water and in alcohol; practically insoluble in chloroform and in ether. It is a xanthine oxidase inhibitor which is administered orally. Each scored white round-shaped tablet contains 100 mg allopurinol and the inactive ingredients colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate. Each scored orange round-shaped tablet contains 300 mg allopurinol and the inactive ingredients colloidal silicon dioxide, FD&C Yellow No. 6 Lake, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>72162-1150-0</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (72162-1150-0) </PackageDescription>
<NDC11Code>72162-1150-00</NDC11Code>
<ProductNDC>72162-1150</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Allopurinol</ProprietaryName>
<NonProprietaryName>Allopurinol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20030627</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075798</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ALLOPURINOL</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20030627</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allopurinol tablets are indicated for: 1 The management of adults with signs and symptoms of primary or secondary gout (acute attacks, tophi, joint destruction, uric acid lithiasis, and/or nephropathy), 2 The management of adult and pediatric patients with leukemia, lymphoma and solid tumor malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels, 3 The management of adult patients with recurrent calcium oxalate calculi whose daily uric acid excretion exceeds 800 mg/day in male patients and 750 mg/day in female patients, despite lifestyle changes (such as reduction of dietary sodium, non-dairy animal protein, oxylate rich foods, refined sugars and increases in oral fluids and fruits and vegetables).</IndicationAndUsage>
<Description>Allopurinol, USP is a xanthine oxidase inhibitor. It has the following structural formula. Allopurinol, USP is known chemically as 1, 5-dihydro-4H-pyrazolo [3, 4-d]pyrimidin-4-one and it has a molecular weight of 136.1 g/mol. Soluble in solutions of potassium and sodium hydroxides, very slightly soluble in water and in alcohol; practically insoluble in chloroform and in ether. It is a xanthine oxidase inhibitor which is administered orally. Each scored white round-shaped tablet contains 100 mg allopurinol and the inactive ingredients colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate. Each scored orange round-shaped tablet contains 300 mg allopurinol and the inactive ingredients colloidal silicon dioxide, FD&C Yellow No. 6 Lake, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>72162-1166-0</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE, PLASTIC (72162-1166-0) </PackageDescription>
<NDC11Code>72162-1166-00</NDC11Code>
<ProductNDC>72162-1166</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenobarbital</ProprietaryName>
<NonProprietaryName>Phenobarbital</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020301</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>PHENOBARBITAL</SubstanceName>
<StrengthNumber>16.2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-10-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20020301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sedative. Anticonvulsant – For the treatment of generalized and partial seizures.</IndicationAndUsage>
<Description>The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline powder that is very slightly soluble in water; soluble in alcohol, in ether, and in solutions of fixed alkali hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5-phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula. Each phenobarbital tablet contains 16.2 mg, 32.4 mg, 64.8 mg or 97.2 mg of phenobarbital. In addition each tablet contains: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>72162-1167-0</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE, PLASTIC (72162-1167-0) </PackageDescription>
<NDC11Code>72162-1167-00</NDC11Code>
<ProductNDC>72162-1167</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenobarbital</ProprietaryName>
<NonProprietaryName>Phenobarbital</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20011201</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>PHENOBARBITAL</SubstanceName>
<StrengthNumber>64.8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-10-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20011201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sedative. Anticonvulsant – For the treatment of generalized and partial seizures.</IndicationAndUsage>
<Description>The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline powder that is very slightly soluble in water; soluble in alcohol, in ether, and in solutions of fixed alkali hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5-phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula. Each phenobarbital tablet contains 16.2 mg, 32.4 mg, 64.8 mg or 97.2 mg of phenobarbital. In addition each tablet contains: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate.</Description>
</NDC>
</NDCList>