{
"NDC": [
{
"NDCCode": "72162-2270-2",
"PackageDescription": "1 TUBE in 1 CARTON (72162-2270-2) / 22 g in 1 TUBE",
"NDC11Code": "72162-2270-02",
"ProductNDC": "72162-2270",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mupirocin",
"NonProprietaryName": "Mupirocin",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20091030",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065123",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "MUPIROCIN",
"StrengthNumber": "20",
"StrengthUnit": "mg/g",
"Pharm_Classes": "RNA Synthetase Inhibitor Antibacterial [EPC], RNA Synthetase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-10-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240312",
"SamplePackage": "N",
"IndicationAndUsage": "Mupirocin Ointment USP, 2% is indicated for the topical treatment of impetigo due to susceptible isolates of Staphylococcus aureus (S. aureus) and Streptococcus pyogenes (S. pyogenes).",
"Description": "Mupirocin Ointment USP, 2% contains the RNA synthetase inhibitor antibacterial, mupirocin. The chemical name is (E)-(2S,3R,4R,5S)-5-[(2S,3S,4S,5S)-2,3-epoxy-5-hydroxy-4-methylhexyl] tetrahydro-3,4-dihydroxy-β-methyl-2H-pyran-2-crotonic acid, ester with 9-hydroxynonanoic acid. The molecular formula of mupirocin is C26H44O9, and the molecular weight is 500.6. The structural formula of mupirocin is. Figure 1. Structure of Murpirocin. Each gram of Mupirocin Ointment USP, 2% contains 20 mg mupirocin in a water-miscible ointment base (polyethylene glycol ointment, NF) consisting of polyethylene glycol 400 and polyethylene glycol 3350."
},
{
"NDCCode": "36987-2270-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (36987-2270-2)",
"NDC11Code": "36987-2270-02",
"ProductNDC": "36987-2270",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Bermuda Grass Pollen",
"NonProprietaryName": "Standardized Bermuda Grass Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19980210",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102195",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "CYNODON DACTYLON POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Standardized Pollen Extract is intended for use in the diagnosis and therapy of pollen allergic patients as established by allergy history and skin test reactivity. Standardized Grass Pollen extracts labeled in BAU/mL are not interchangeable with Grass Pollen extracts labeled in AU/mL or with non-standardized Grass Pollen extracts. The 10,000 BAU/mL dose form is indicated for percutaneous testing. If negative, 100,000 BAU/mL dose form can be used for percutaneous testing. For immunotherapy, availability of 10,000 and 100,000 BAU/mL dosages facilitates safe switching. (See Dosage & Administration). The use of standardized grass pollen extracts is indicated for hyposensitization treatment and may be used as part of the over-all management of the allergic patient. Treatment of grass sensitive patients consists of using specific standardized grass products of up to and including doses of 100,000 BAU/mL (up to 10,000 BAU/mL for Bermuda grass) or stock mixtures of standardized grass products. Stock mixtures of standardized grass extracts are particularly useful in hyposensitization treatment when multiple allergies to grasses are diagnosed. For previously untreated patients, the 10,000 BAU/mL concentrates can be used to formulate dosages. If tolerated, the concentrates can be inceased to 100,000 BAU/mL dose formulation.",
"Description": "Standardized Grass Pollen Extracts include: Orchard (Dactylis glomerata), Perennial Rye (Lolium perenne), Timothy (Phleum pratense), Redtop (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda (Cynodon dactylon), Meadow Fescue (Festuca elatior), Sweet Vernal (Anthoxanthum odoratum). The standardized grass pollen extract is prepared by extracting raw pollen material at a ratio of either 1:5 w/v, 1:6.66 w/v or 1:10 w/v in Cocas fluid containing 0.5% NaCl, 0.275% NaHCO3, WFI and 0.4% phenol as preservative. Following extraction, a calculated amount of glycerin is added to make a 50%(v/v) glycerinated solution. Standardized Grass Pollen extracts have potency designations of 10,000 BAU/mL and 100,000 BAU/mL except Bermuda Grass (10,000 BAU/mL only). Extracts with a potency of 10,000 BAU/mL are diluted from the 100,000 BAU/mL lots with Glycerol Saline 50%(v/v). The Glycerol Saline 50%(v/v) solution consists of Glycerin and Salts and Buffered Diluent whose ingredients are 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI and 0.4% phenol as a preservative. All extracts are aseptically filled in sterile containers. Standardized pollen extracts are intended for administration by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injection. Standardized grass pollen extracts labeled in BAU/mL are not interchangeable with grass pollen extracts labeled in AU/mL or with non-standardized grass pollen extracts. The Bioequivalent Allergy Unit (BAU), the potency unit used for all Standardized Pollen Extracts, replaces the previous unitage for these products. Bioequivalent Allergy Units were assigned to the FDA, Center for Biologics Evaluation and Research (CBER) reference extracts, based on quantitative intradermal skin test results. BAU's are intended to assure that the labeled unitage of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted one half million fold to produce an intradermal sum of erythema diameter response of 50mm in highly puncture reactive subjects. 100,000 BAU/mL can be diluted 1:5 million fold to yield the same intradermal response.(2) The assignment of BAU/mL to standardized grass pollen extracts, is accomplished by an ELISA assay comparing the extract to the CBER reference. Previously, the potency / concentration of grass mixtures was designated based on the manufacturing strength, e.g. 1:10 w/v or 1:20 w/v, or in PNU's/mL. For grass mixtures containing standardized extracts, the potency will reflect the contribution of each individual component in the mixture, i.e., the actual potency of each component will be listed on a per mL basis. In addition, because the individual components may be cross-reactive, an additional caution statement, \"due to cross reactivity, total potency may be 100,000 BAU/mL,\" will be added to the label."
},
{
"NDCCode": "37662-2270-2",
"PackageDescription": "1200 PELLET in 1 BOTTLE, GLASS (37662-2270-2) ",
"NDC11Code": "37662-2270-02",
"ProductNDC": "37662-2270",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Scutellaria Lateriflora",
"NonProprietaryName": "Scutellaria Lateriflora",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230109",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "SCUTELLARIA LATERIFLORA WHOLE",
"StrengthNumber": "6",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2023-01-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230109",
"SamplePackage": "N"
},
{
"NDCCode": "55714-2270-2",
"PackageDescription": "59.14 mL in 1 BOTTLE, GLASS (55714-2270-2)",
"NDC11Code": "55714-2270-02",
"ProductNDC": "55714-2270",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Warts - Moles - Skin Tags",
"NonProprietaryName": "Antimon. Crud., Bryonia, Calc.carb., Causticum, Dulcamara, Graphites, Lycopodium, Merc. Sulph. Rub., Nat. Carb., Nitricum Ac., Nux Vom., Rhus Toxicodendron, Sabina, Sepia, Silicea, Staphysag., Sulphur, Thuja Occ., Taraxacum",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20110301",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Newton Laboratories, Inc.",
"SubstanceName": "ANTIMONY TRISULFIDE; BRYONIA ALBA ROOT; OYSTER SHELL CALCIUM CARBONATE, CRUDE; CAUSTICUM; SOLANUM DULCAMARA TOP; GRAPHITE; LYCOPODIUM CLAVATUM SPORE; MERCURIC SULFIDE; SODIUM CARBONATE; NITRIC ACID; STRYCHNOS NUX-VOMICA SEED; TOXICODENDRON PUBESCENS LEAF; JUNIPERUS SABINA LEAFY TWIG; SEPIA OFFICINALIS JUICE; SILICON DIOXIDE; DELPHINIUM STAPHISAGRIA SEED; SULFUR; THUJA OCCIDENTALIS LEAFY TWIG; TARAXACUM OFFICINALE",
"StrengthNumber": "15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 3",
"StrengthUnit": "[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Warts - Moles - Skin Tags Formulated for various types of skin conditions such as warts (including genital), moles, keloids, molluscum and skin tags."
},
{
"NDCCode": "64942-2270-2",
"PackageDescription": "1 CONTAINER in 1 CARTON (64942-2270-2) / 48 g in 1 CONTAINER (64942-2270-1) ",
"NDC11Code": "64942-2270-02",
"ProductNDC": "64942-2270",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Dove",
"NonProprietaryName": "Clinical Protection Skin Renew Antiperspirant And Deodorant",
"DosageFormName": "STICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20230414",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M019",
"LabelerName": "Conopco Inc. d/b/a/ Unilever",
"SubstanceName": "ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY",
"StrengthNumber": "20",
"StrengthUnit": "g/100g",
"Status": "Active",
"LastUpdate": "2024-04-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230414",
"SamplePackage": "N",
"IndicationAndUsage": " reduces underarm wetness extra effective."
},
{
"NDCCode": "71335-2270-2",
"PackageDescription": "30 TABLET in 1 BOTTLE (71335-2270-2) ",
"NDC11Code": "71335-2270-02",
"ProductNDC": "71335-2270",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Butalbital, Acetaminophen And Caffeine",
"NonProprietaryName": "Butalbital, Acetaminophen And Caffeine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220629",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040864",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "BUTALBITAL; ACETAMINOPHEN; CAFFEINE",
"StrengthNumber": "50; 325; 40",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Pharm_Classes": "Barbiturate [EPC], Barbiturates [CS], Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Methylxanthine [EPC], Xanthines [CS]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2023-12-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231130",
"SamplePackage": "N",
"IndicationAndUsage": "Butalbital, acetaminophen and caffeine tablets are indicated for the relief of the symptom complex of tension (or muscle contraction) headache. Evidence supporting the efficacy and safety of butalbital, acetaminophen, and caffeine tablets in the treatment of multiple recurrent headaches is unavailable. Caution in this regard is required because butalbital is habit-forming and potentially abusable.",
"Description": "Butalbital, Acetaminophen and Caffeine Tablets, USP are supplied in tablet form for oral administration. Each tablet contains the following active ingredients. Butalbital, USP..............................................................50 mg. Acetaminophen, USP....................................................325 mg. Caffeine, USP................................................................40 mg. Inactive Ingredients: microcrystalline cellulose, sodium starch glycolate and magnesium stearate. Butalbital (5-allyl-5-isobutylbarbituric acid), is a short to intermediate-acting barbiturate. It has the following structural formula:. C 11H 16N 2O 3 M.W. = 224.26. Acetaminophen (4'-hydroxyacetanilide), is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. C 8H 9NO 2 M.W. = 151.16. Caffeine (1,3,7-trimethylxanthine), is a central nervous system stimulant. It has the following structural formula. C 8H 10N 4O 2 M.W. = 194.19."
},
{
"NDCCode": "0069-2270-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (0069-2270-30) ",
"NDC11Code": "00069-2270-30",
"ProductNDC": "0069-2270",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Caduet",
"NonProprietaryName": "Amlodipine Besylate And Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20040130",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021540",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "AMLODIPINE BESYLATE; ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "10; 80",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-04-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20040130",
"SamplePackage": "N",
"IndicationAndUsage": "CADUET (amlodipine and atorvastatin) is indicated in patients for whom treatment with both amlodipine and atorvastatin is appropriate.",
"Description": "CADUET (amlodipine and atorvastatin) tablets combine the calcium channel blocker amlodipine besylate with the HMG CoA-reductase inhibitor atorvastatin calcium. Amlodipine besylate is chemically described as 3-ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(o-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its empirical formula is C20H25ClN2O5∙C6H6O3S. Atorvastatin calcium is chemically described as [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. Its empirical formula is (C33H34 FN2O5)2Ca∙3H2O. The structural formulae for amlodipine besylate and atorvastatin calcium are shown below. CADUET contains amlodipine besylate, a white to off-white crystalline powder, and atorvastatin calcium, also a white to off-white crystalline powder. Amlodipine besylate has a molecular weight of 567.1 and atorvastatin calcium has a molecular weight of 1209.42. Amlodipine besylate is slightly soluble in water and sparingly soluble in ethanol. Atorvastatin calcium is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in ethanol; and freely soluble in methanol. CADUET is available as film-coated tablets containing: 1 5 mg amlodipine equivalent to 6.9 mg amlodipine besylate and 10 mg atorvastatin equivalent to 10.4 mg atorvastatin calcium., 2 5 mg amlodipine equivalent to 6.9 mg amlodipine besylate and 20 mg atorvastatin equivalent to 20.7 mg atorvastatin calcium., 3 5 mg amlodipine equivalent to 6.9 mg amlodipine besylate and 40 mg atorvastatin equivalent to 41.4 mg atorvastatin calcium., 4 5 mg amlodipine equivalent to 6.9 mg amlodipine besylate and 80 mg atorvastatin equivalent to 82.9 mg atorvastatin calcium., 5 10 mg amlodipine equivalent to 13.9 mg amlodipine besylate and 10 mg atorvastatin equivalent to 10.4 mg atorvastatin calcium., 6 10 mg amlodipine equivalent to 13.9 mg amlodipine besylate and 20 mg atorvastatin equivalent to 20.7 mg atorvastatin calcium., 7 10 mg amlodipine equivalent to 13.9 mg amlodipine besylate and 40 mg atorvastatin equivalent to 41.4 mg atorvastatin calcium., 8 10 mg amlodipine equivalent to 13.9 mg amlodipine besylate and 80 mg atorvastatin equivalent to 82.9 mg atorvastatin calcium."
},
{
"NDCCode": "0093-2270-34",
"PackageDescription": "20 TABLET, CHEWABLE in 1 BOTTLE (0093-2270-34) ",
"NDC11Code": "00093-2270-34",
"ProductNDC": "0093-2270",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin And Clavulanate Potassium",
"NonProprietaryName": "Amoxicillin And Clavulanate Potassium",
"DosageFormName": "TABLET, CHEWABLE",
"RouteName": "ORAL",
"StartMarketingDate": "20050322",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065205",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "AMOXICILLIN; CLAVULANATE POTASSIUM",
"StrengthNumber": "200; 28.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-09-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20050322",
"SamplePackage": "N",
"IndicationAndUsage": "Amoxicillin and clavulanate potassium tablets, amoxicillin and clavulanate potassium for oral suspension, and amoxicillin and clavulanate potassium tablets (chewable) are indicated for the treatment of infections in adults and pediatric patients, due to susceptible isolates of the designated bacteria in the conditions listed below: 1 Lower Respiratory Tract Infections – caused by beta–lactamase–producing isolates of Haemophilus influenzae and Moraxella catarrhalis. , 2 Acute Bacterial Otitis Media – caused by beta–lactamase–producing isolates of H. influenzae and M. catarrhalis. , 3 Sinusitis – caused by beta–lactamase–producing isolates of H. influenzae and M. catarrhalis. , 4 Skin and Skin Structure Infections – caused by beta–lactamase–producing isolates of Staphylococcus aureus, Escherichia coli, and Klebsiella species. , 5 Urinary Tract Infections – caused by beta–lactamase–producing isolates of E. coli, Klebsiella species, and Enterobacter species. .",
"Description": "Amoxicillin and clavulanate potassium tablets, amoxicillin and clavulanate potassium for oral suspension, and amoxicillin and clavulanate potassium tablets (chewable) are oral antibacterial combinations consisting of the semisynthetic antibiotic amoxicillin, USP and the beta–lactamase inhibitor, clavulanate potassium, USP (the potassium salt of clavulanic acid). Amoxicillin, USP is an analog of ampicillin, derived from the basic penicillin nucleus, 6–aminopenicillanic acid. Chemically, amoxicillin, USP is (2S,5R,6R)–6–[(R)–(–)–2–Amino–2–(p–hydroxyphenyl)acetamido]–3,3–dimethyl–7–oxo–4–thia–1–azabicyclo[3.2.0]heptane–2–carboxylic acid trihydrate and has the following structural formula. C16H19N3O5S3H2O M.W. 419.45. Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a beta-lactam structurally related to the penicillins and possesses the ability to inactivate some beta-lactamases by blocking the active sites of these enzymes. Chemically, clavulanate potassium, USP is potassium (Z)-(2R,5R)-3-(2-hydroxyethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate, and has the following structural formula. C8H8KNO5 M.W. 237.25. Amoxicillin and Clavulanate Potassium Tablets, USP: 1 500 mg/125 mg: Each tablet contains 500 mg of amoxicillin, USP as the trihydrate, and 125 mg of clavulanic acid (equivalent to 149 mg of clavulanate potassium)., 2 875 mg/125 mg: Each tablet contains 875 mg of amoxicillin, USP as the trihydrate, and 125 mg of clavulanic acid (equivalent to 149 mg of clavulanate potassium)."
},
{
"NDCCode": "0781-2270-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (0781-2270-01) ",
"NDC11Code": "00781-2270-01",
"ProductNDC": "0781-2270",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Butalbital, Aspirin, And Caffeine",
"NonProprietaryName": "Butalbital, Aspirin, And Caffeine",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240903",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA086996",
"LabelerName": "Sandoz Inc",
"SubstanceName": "BUTALBITAL; ASPIRIN; CAFFEINE",
"StrengthNumber": "50; 325; 40",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Barbiturate [EPC], Barbiturates [CS], Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Cyclooxygenase Inhibitors [MoA], Decreased Platelet Aggregation [PE], Decreased Prostaglandin Production [PE], Methylxanthine [EPC], Nonsteroidal Anti-inflammatory Drug [EPC], Platelet Aggregation Inhibitor [EPC], Xanthines [CS]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2025-11-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240903",
"SamplePackage": "N",
"IndicationAndUsage": "Butalbital, aspirin, and caffeine capsules are indicated for the relief of the symptom complex of tension (or muscle contraction) headache. Evidence supporting the efficacy and safety of butalbital, aspirin, and caffeine capsules in the treatment of multiple recurrent headaches is unavailable. Caution in this regard is required because butalbital is habit-forming and potentially abusable.",
"Description": "Butalbital, aspirin, and caffeine capsules, USP are supplied in capsule form for oral administration. Each capsule contains the following active ingredients:butalbital, USP 50 mg. aspirin, USP 325 mg. caffeine, USP 40 mg. Butalbital (5-allyl-5-isobutylbarbituric acid) is a short- to intermediate-acting barbiturate. It has the following. Molecular Formula: C11H16N2O3. Molecular Weight: 224.26. Structural Formula. Aspirin (benzoic acid, 2-(acetyloxy)-) is an analgesic, antipyretic, and anti-inflammatory. It has the following. Molecular Formula: C9H8O4. Molecular Weight: 180.16. Structural Formula. Caffeine (1, 3, 7-trimethylxanthine) is a central nervous system stimulant. It has the following. Molecular Formula: C8H10N4O2. Molecular Weight: 194.19. Structural Formula. Inactive Ingredients: pregelatinized starch, microcrystalline cellulose, sodium starch glycolate, trimyristin, talc, colloidal silicon dioxide, D&C Yellow No. 10, FD&C Green No. 3, and gelatin. The capsule imprinting ink contains: shellac glaze in ethanol, iron oxide black, n-butyl alcohol, propylene glycol, ethanol, methanol, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, and D&C Yellow No.10 Aluminum Lake."
},
{
"NDCCode": "36987-2270-1",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (36987-2270-1)",
"NDC11Code": "36987-2270-01",
"ProductNDC": "36987-2270",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Bermuda Grass Pollen",
"NonProprietaryName": "Standardized Bermuda Grass Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19980210",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102195",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "CYNODON DACTYLON POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Standardized Pollen Extract is intended for use in the diagnosis and therapy of pollen allergic patients as established by allergy history and skin test reactivity. Standardized Grass Pollen extracts labeled in BAU/mL are not interchangeable with Grass Pollen extracts labeled in AU/mL or with non-standardized Grass Pollen extracts. The 10,000 BAU/mL dose form is indicated for percutaneous testing. If negative, 100,000 BAU/mL dose form can be used for percutaneous testing. For immunotherapy, availability of 10,000 and 100,000 BAU/mL dosages facilitates safe switching. (See Dosage & Administration). The use of standardized grass pollen extracts is indicated for hyposensitization treatment and may be used as part of the over-all management of the allergic patient. Treatment of grass sensitive patients consists of using specific standardized grass products of up to and including doses of 100,000 BAU/mL (up to 10,000 BAU/mL for Bermuda grass) or stock mixtures of standardized grass products. Stock mixtures of standardized grass extracts are particularly useful in hyposensitization treatment when multiple allergies to grasses are diagnosed. For previously untreated patients, the 10,000 BAU/mL concentrates can be used to formulate dosages. If tolerated, the concentrates can be inceased to 100,000 BAU/mL dose formulation.",
"Description": "Standardized Grass Pollen Extracts include: Orchard (Dactylis glomerata), Perennial Rye (Lolium perenne), Timothy (Phleum pratense), Redtop (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda (Cynodon dactylon), Meadow Fescue (Festuca elatior), Sweet Vernal (Anthoxanthum odoratum). The standardized grass pollen extract is prepared by extracting raw pollen material at a ratio of either 1:5 w/v, 1:6.66 w/v or 1:10 w/v in Cocas fluid containing 0.5% NaCl, 0.275% NaHCO3, WFI and 0.4% phenol as preservative. Following extraction, a calculated amount of glycerin is added to make a 50%(v/v) glycerinated solution. Standardized Grass Pollen extracts have potency designations of 10,000 BAU/mL and 100,000 BAU/mL except Bermuda Grass (10,000 BAU/mL only). Extracts with a potency of 10,000 BAU/mL are diluted from the 100,000 BAU/mL lots with Glycerol Saline 50%(v/v). The Glycerol Saline 50%(v/v) solution consists of Glycerin and Salts and Buffered Diluent whose ingredients are 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI and 0.4% phenol as a preservative. All extracts are aseptically filled in sterile containers. Standardized pollen extracts are intended for administration by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injection. Standardized grass pollen extracts labeled in BAU/mL are not interchangeable with grass pollen extracts labeled in AU/mL or with non-standardized grass pollen extracts. The Bioequivalent Allergy Unit (BAU), the potency unit used for all Standardized Pollen Extracts, replaces the previous unitage for these products. Bioequivalent Allergy Units were assigned to the FDA, Center for Biologics Evaluation and Research (CBER) reference extracts, based on quantitative intradermal skin test results. BAU's are intended to assure that the labeled unitage of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted one half million fold to produce an intradermal sum of erythema diameter response of 50mm in highly puncture reactive subjects. 100,000 BAU/mL can be diluted 1:5 million fold to yield the same intradermal response.(2) The assignment of BAU/mL to standardized grass pollen extracts, is accomplished by an ELISA assay comparing the extract to the CBER reference. Previously, the potency / concentration of grass mixtures was designated based on the manufacturing strength, e.g. 1:10 w/v or 1:20 w/v, or in PNU's/mL. For grass mixtures containing standardized extracts, the potency will reflect the contribution of each individual component in the mixture, i.e., the actual potency of each component will be listed on a per mL basis. In addition, because the individual components may be cross-reactive, an additional caution statement, \"due to cross reactivity, total potency may be 100,000 BAU/mL,\" will be added to the label."
},
{
"NDCCode": "36987-2270-3",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (36987-2270-3)",
"NDC11Code": "36987-2270-03",
"ProductNDC": "36987-2270",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Bermuda Grass Pollen",
"NonProprietaryName": "Standardized Bermuda Grass Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19980210",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102195",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "CYNODON DACTYLON POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Standardized Pollen Extract is intended for use in the diagnosis and therapy of pollen allergic patients as established by allergy history and skin test reactivity. Standardized Grass Pollen extracts labeled in BAU/mL are not interchangeable with Grass Pollen extracts labeled in AU/mL or with non-standardized Grass Pollen extracts. The 10,000 BAU/mL dose form is indicated for percutaneous testing. If negative, 100,000 BAU/mL dose form can be used for percutaneous testing. For immunotherapy, availability of 10,000 and 100,000 BAU/mL dosages facilitates safe switching. (See Dosage & Administration). The use of standardized grass pollen extracts is indicated for hyposensitization treatment and may be used as part of the over-all management of the allergic patient. Treatment of grass sensitive patients consists of using specific standardized grass products of up to and including doses of 100,000 BAU/mL (up to 10,000 BAU/mL for Bermuda grass) or stock mixtures of standardized grass products. Stock mixtures of standardized grass extracts are particularly useful in hyposensitization treatment when multiple allergies to grasses are diagnosed. For previously untreated patients, the 10,000 BAU/mL concentrates can be used to formulate dosages. If tolerated, the concentrates can be inceased to 100,000 BAU/mL dose formulation.",
"Description": "Standardized Grass Pollen Extracts include: Orchard (Dactylis glomerata), Perennial Rye (Lolium perenne), Timothy (Phleum pratense), Redtop (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda (Cynodon dactylon), Meadow Fescue (Festuca elatior), Sweet Vernal (Anthoxanthum odoratum). The standardized grass pollen extract is prepared by extracting raw pollen material at a ratio of either 1:5 w/v, 1:6.66 w/v or 1:10 w/v in Cocas fluid containing 0.5% NaCl, 0.275% NaHCO3, WFI and 0.4% phenol as preservative. Following extraction, a calculated amount of glycerin is added to make a 50%(v/v) glycerinated solution. Standardized Grass Pollen extracts have potency designations of 10,000 BAU/mL and 100,000 BAU/mL except Bermuda Grass (10,000 BAU/mL only). Extracts with a potency of 10,000 BAU/mL are diluted from the 100,000 BAU/mL lots with Glycerol Saline 50%(v/v). The Glycerol Saline 50%(v/v) solution consists of Glycerin and Salts and Buffered Diluent whose ingredients are 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI and 0.4% phenol as a preservative. All extracts are aseptically filled in sterile containers. Standardized pollen extracts are intended for administration by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injection. Standardized grass pollen extracts labeled in BAU/mL are not interchangeable with grass pollen extracts labeled in AU/mL or with non-standardized grass pollen extracts. The Bioequivalent Allergy Unit (BAU), the potency unit used for all Standardized Pollen Extracts, replaces the previous unitage for these products. Bioequivalent Allergy Units were assigned to the FDA, Center for Biologics Evaluation and Research (CBER) reference extracts, based on quantitative intradermal skin test results. BAU's are intended to assure that the labeled unitage of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted one half million fold to produce an intradermal sum of erythema diameter response of 50mm in highly puncture reactive subjects. 100,000 BAU/mL can be diluted 1:5 million fold to yield the same intradermal response.(2) The assignment of BAU/mL to standardized grass pollen extracts, is accomplished by an ELISA assay comparing the extract to the CBER reference. Previously, the potency / concentration of grass mixtures was designated based on the manufacturing strength, e.g. 1:10 w/v or 1:20 w/v, or in PNU's/mL. For grass mixtures containing standardized extracts, the potency will reflect the contribution of each individual component in the mixture, i.e., the actual potency of each component will be listed on a per mL basis. In addition, because the individual components may be cross-reactive, an additional caution statement, \"due to cross reactivity, total potency may be 100,000 BAU/mL,\" will be added to the label."
},
{
"NDCCode": "36987-2270-4",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (36987-2270-4)",
"NDC11Code": "36987-2270-04",
"ProductNDC": "36987-2270",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Bermuda Grass Pollen",
"NonProprietaryName": "Standardized Bermuda Grass Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19980210",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102195",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "CYNODON DACTYLON POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Standardized Pollen Extract is intended for use in the diagnosis and therapy of pollen allergic patients as established by allergy history and skin test reactivity. Standardized Grass Pollen extracts labeled in BAU/mL are not interchangeable with Grass Pollen extracts labeled in AU/mL or with non-standardized Grass Pollen extracts. The 10,000 BAU/mL dose form is indicated for percutaneous testing. If negative, 100,000 BAU/mL dose form can be used for percutaneous testing. For immunotherapy, availability of 10,000 and 100,000 BAU/mL dosages facilitates safe switching. (See Dosage & Administration). The use of standardized grass pollen extracts is indicated for hyposensitization treatment and may be used as part of the over-all management of the allergic patient. Treatment of grass sensitive patients consists of using specific standardized grass products of up to and including doses of 100,000 BAU/mL (up to 10,000 BAU/mL for Bermuda grass) or stock mixtures of standardized grass products. Stock mixtures of standardized grass extracts are particularly useful in hyposensitization treatment when multiple allergies to grasses are diagnosed. For previously untreated patients, the 10,000 BAU/mL concentrates can be used to formulate dosages. If tolerated, the concentrates can be inceased to 100,000 BAU/mL dose formulation.",
"Description": "Standardized Grass Pollen Extracts include: Orchard (Dactylis glomerata), Perennial Rye (Lolium perenne), Timothy (Phleum pratense), Redtop (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda (Cynodon dactylon), Meadow Fescue (Festuca elatior), Sweet Vernal (Anthoxanthum odoratum). The standardized grass pollen extract is prepared by extracting raw pollen material at a ratio of either 1:5 w/v, 1:6.66 w/v or 1:10 w/v in Cocas fluid containing 0.5% NaCl, 0.275% NaHCO3, WFI and 0.4% phenol as preservative. Following extraction, a calculated amount of glycerin is added to make a 50%(v/v) glycerinated solution. Standardized Grass Pollen extracts have potency designations of 10,000 BAU/mL and 100,000 BAU/mL except Bermuda Grass (10,000 BAU/mL only). Extracts with a potency of 10,000 BAU/mL are diluted from the 100,000 BAU/mL lots with Glycerol Saline 50%(v/v). The Glycerol Saline 50%(v/v) solution consists of Glycerin and Salts and Buffered Diluent whose ingredients are 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI and 0.4% phenol as a preservative. All extracts are aseptically filled in sterile containers. Standardized pollen extracts are intended for administration by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injection. Standardized grass pollen extracts labeled in BAU/mL are not interchangeable with grass pollen extracts labeled in AU/mL or with non-standardized grass pollen extracts. The Bioequivalent Allergy Unit (BAU), the potency unit used for all Standardized Pollen Extracts, replaces the previous unitage for these products. Bioequivalent Allergy Units were assigned to the FDA, Center for Biologics Evaluation and Research (CBER) reference extracts, based on quantitative intradermal skin test results. BAU's are intended to assure that the labeled unitage of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted one half million fold to produce an intradermal sum of erythema diameter response of 50mm in highly puncture reactive subjects. 100,000 BAU/mL can be diluted 1:5 million fold to yield the same intradermal response.(2) The assignment of BAU/mL to standardized grass pollen extracts, is accomplished by an ELISA assay comparing the extract to the CBER reference. Previously, the potency / concentration of grass mixtures was designated based on the manufacturing strength, e.g. 1:10 w/v or 1:20 w/v, or in PNU's/mL. For grass mixtures containing standardized extracts, the potency will reflect the contribution of each individual component in the mixture, i.e., the actual potency of each component will be listed on a per mL basis. In addition, because the individual components may be cross-reactive, an additional caution statement, \"due to cross reactivity, total potency may be 100,000 BAU/mL,\" will be added to the label."
},
{
"NDCCode": "72162-1000-2",
"PackageDescription": "120 CAPSULE in 1 BOTTLE (72162-1000-2) ",
"NDC11Code": "72162-1000-02",
"ProductNDC": "72162-1000",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Icosapent Ethyl",
"NonProprietaryName": "Icosapent Ethyl",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20201104",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209457",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ICOSAPENT ETHYL",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Status": "Active",
"LastUpdate": "2026-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241224",
"SamplePackage": "N",
"IndicationAndUsage": "Icosapent ethyl is indicated: 1 as an adjunct to diet to reduce triglyceride (TG) levels in adult patients with severe (≥500 mg/dL) hypertriglyceridemia. .",
"Description": "Icosapent ethyl, a lipid-regulating agent, is supplied as a 0.5 gram and 1 gram, liquid-filled soft gelatin capsule for oral administration. Each icosapent ethyl capsule contains either 0.5 grams of icosapent ethyl or 1 gram of icosapent ethyl. Icosapent ethyl is an ethyl ester of the omega-3 fatty acid eicosapentaenoic acid (EPA). The empirical formula of icosapent ethyl is C22H34O2 and the molecular weight is 330.5. The chemical name for icosapent ethyl is ethyl all-cis-5,8,11,14,17-icosapentaenoate with the following chemical structure. Each capsule contains the following inactive ingredients: gelatin, glycerin, purified water, sorbitol, sorbitan and tocopherol. The monogramming ink ingredients contain: ammonium hydroxide, iron oxide black, isopropyl alcohol, macrogol, polyvinyl acetate phthalate, propylene glycol, purified water and SDA alcohol (ethanol and ethyl acetate)."
},
{
"NDCCode": "72162-1048-2",
"PackageDescription": "1 TUBE in 1 CARTON (72162-1048-2) / 45 g in 1 TUBE",
"NDC11Code": "72162-1048-02",
"ProductNDC": "72162-1048",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Adapalene",
"NonProprietaryName": "Adapalene",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20100630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090824",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ADAPALENE",
"StrengthNumber": "1",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Active",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240223",
"SamplePackage": "N",
"IndicationAndUsage": "Adapalene cream is indicated for the topical treatment of acne vulgaris.",
"Description": "Adapalene cream, 0.1%, contains adapalene 0.1% in an aqueous cream emulsion consisting of carbomer 934P, cyclomethicone, edetate disodium, glycerin, methyl glucose sesquistearate, methylparaben, PEG-20 methyl glucose sesquistearate, phenoxyethanol, propylparaben, purified water, squalane, and trolamine. The chemical name of adapalene is 6-[3-(1-adamantyl)-4-methoxyphenyl]-2-naphthoic acid. It is a white to off-white powder which is soluble in tetrahydrofuran, sparingly soluble in ethanol, and practically insoluble in water. The molecular formula is C28H28O3 and molecular weight is 412.52. Adapalene is represented by the following structural formula:."
},
{
"NDCCode": "72162-1059-2",
"PackageDescription": "45 TABLET, EXTENDED RELEASE in 1 BOTTLE (72162-1059-2) ",
"NDC11Code": "72162-1059-02",
"ProductNDC": "72162-1059",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alprazolam",
"ProprietaryNameSuffix": "Extended Release",
"NonProprietaryName": "Alprazolam",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20070312",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078056",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ALPRAZOLAM",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2023-05-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230508",
"SamplePackage": "N",
"Description": "Alprazolam extended-release tablets, USP contain alprazolam, USP which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-α] [1,4] benzodiazepine. The molecular formula is C17H13ClN4 which corresponds to a molecular weight of 308.76. The structural formula is represented below. Alprazolam, USP is a white crystalline powder, which is soluble in methanol or ethanol but which has no appreciable solubility in water at physiological pH. Each alprazolam extended-release tablet USP, for oral administration, contains 0.5 mg, 1 mg, 2 mg, or 3 mg of alprazolam, USP. The inactive ingredients are lactose monohydrate, hypromellose, and magnesium stearate. In addition, the 1 mg tablets also contain D&C yellow #10 aluminum lake. The 2 mg tablets also contain FD&C Yellow #6 aluminum lake, and the 3 mg tablets also contain D&C Yellow #10 aluminum lake, and FD&C Blue #2 aluminum lake. Product meets USP Dissolution Test 2."
},
{
"NDCCode": "72162-1071-2",
"PackageDescription": "1 TUBE in 1 CARTON (72162-1071-2) / 45 g in 1 TUBE",
"NDC11Code": "72162-1071-02",
"ProductNDC": "72162-1071",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tretinoin",
"NonProprietaryName": "Tretinoin",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20190812",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA017955",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "TRETINOIN",
"StrengthNumber": ".1",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241224",
"SamplePackage": "N",
"IndicationAndUsage": "Tretinoin is indicated for topical application in the treatment of acne vulgaris. The safety and efficacy of the long-term use of this product in the treatment of other disorders have not been established.",
"Description": "Tretinoin Cream and Tretinoin Gel are used for the topical treatment of acne vulgaris. Tretinoin Gel contains tretinoin (retinoic acid, vitamin A acid) in either of two strengths, 0.025% or 0.01% by weight, in a gel vehicle of butylated hydroxytoluene, hydroxypropyl cellulose and alcohol (denatured with tert-butyl alcohol and brucine sulfate) 90% w/w. Tretinoin Cream contains tretinoin in one of three strengths, 0.1%, 0.05%, or 0.025% by weight, in a hydrophilic cream vehicle of stearic acid, isopropyl myristate, polyoxyl 40 stearate, stearyl alcohol, xanthan gum, sorbic acid, butylated hydroxytoluene, and purified water. Chemically, tretinoin is all-trans-retinoic acid and has the following structure:."
},
{
"NDCCode": "72162-1072-2",
"PackageDescription": "1 TUBE in 1 CARTON (72162-1072-2) / 45 g in 1 TUBE",
"NDC11Code": "72162-1072-02",
"ProductNDC": "72162-1072",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tretinoin",
"NonProprietaryName": "Tretinoin",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20190712",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA017579",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "TRETINOIN",
"StrengthNumber": ".25",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241224",
"SamplePackage": "N",
"IndicationAndUsage": "Tretinoin is indicated for topical application in the treatment of acne vulgaris. The safety and efficacy of the long-term use of this product in the treatment of other disorders have not been established.",
"Description": "Tretinoin Cream and Tretinoin Gel are used for the topical treatment of acne vulgaris. Tretinoin Gel contains tretinoin (retinoic acid, vitamin A acid) in either of two strengths, 0.025% or 0.01% by weight, in a gel vehicle of butylated hydroxytoluene, hydroxypropyl cellulose and alcohol (denatured with tert-butyl alcohol and brucine sulfate) 90% w/w. Tretinoin Cream contains tretinoin in one of three strengths, 0.1%, 0.05%, or 0.025% by weight, in a hydrophilic cream vehicle of stearic acid, isopropyl myristate, polyoxyl 40 stearate, stearyl alcohol, xanthan gum, sorbic acid, butylated hydroxytoluene, and purified water. Chemically, tretinoin is all-trans-retinoic acid and has the following structure:."
},
{
"NDCCode": "72162-1076-2",
"PackageDescription": "90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (72162-1076-2) ",
"NDC11Code": "72162-1076-02",
"ProductNDC": "72162-1076",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride",
"NonProprietaryName": "Potassium Chloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20200102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208864",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2024-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240405",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium chloride extended-release capsules are indicated for the treatment and prophylaxis of hypokalemia in adults and children with or without metabolic alkalosis, in patients for whom dietary management with potassium-rich foods or diuretic dose reduction is insufficient.",
"Description": "Potassium chloride extended-release capsules, USP, are an oral dosage form of microencapsulated potassium chloride containing 600 mg and 750 mg of potassium chloride, USP, equivalent to 8 mEq and 10 mEq of potassium, respectively. The chemical name of the active ingredient is potassium chloride and the structural formula is KCl. It has a molecular mass of 74.55. Potassium chloride, USP, occurs as a white granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Inactive ingredients: ethylcellulose, gelatin, magnesium stearate, sodium lauryl sulfate, titanium dioxide and edible black ink. The 10 mEq capsules also contain black iron oxide, FD&C blue No.1 and FD&C red No.3."
},
{
"NDCCode": "72162-1085-2",
"PackageDescription": "30 mL in 1 BOTTLE, PLASTIC (72162-1085-2) ",
"NDC11Code": "72162-1085-02",
"ProductNDC": "72162-1085",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methadone Hydrocloride",
"ProprietaryNameSuffix": "Dye-free, Sugar-free, Unflavored",
"NonProprietaryName": "Methadone Hydrochloride",
"DosageFormName": "CONCENTRATE",
"RouteName": "ORAL",
"StartMarketingDate": "20201102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212093",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "METHADONE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231005",
"SamplePackage": "N",
"IndicationAndUsage": "Methadone Hydrochloride contains methadone, an opioid agonist indicated for the: 1 detoxification treatment of opioid addiction (heroin or other morphine-like drugs)., 2 maintenance treatment of opioid addiction (heroin or other morphine-like drugs), in conjunction with appropriate social and medical services.",
"Description": "Methadone Hydrochloride Oral Concentrate, USP dye-free, sugar-free, unflavored contains methadone, an opioid agonist, and is available as a dye-free, sugar-free, unflavored liquid concentrate of methadone hydrochloride for oral administration. Methadone hydrochloride is chemically described as 6-(dimethylamino)-4,4-diphenyl-3-heptone hydrochloride. Methadone hydrochloride, USP is a fine white powder. It is very soluble in water, soluble in isopropanol and in chloroform, and practically insoluble in ether and in glycerine. It is present in Methadone Hydrochloride as the racemic mixture. Methadone hydrochloride has a melting point of 235°C, a pKa of 8.25 in water at 20°C, a solution (1 part per 100) pH between 4.5 and 6.5, a partition coefficient of 117 at pH 7.4 in octanol/water and a molecular weight of 345.91. Its structural formula is C21H27NOHCl. This liquid concentrate contains 10 mg of methadone hydrochloride (equivalent to 8.95 mg of methadone) per mL and the following inactive ingredients: citric acid anhydrous, purified water, sodium benzoate."
},
{
"NDCCode": "72162-1098-2",
"PackageDescription": "1 BOTTLE in 1 CARTON (72162-1098-2) / 50 mL in 1 BOTTLE",
"NDC11Code": "72162-1098-02",
"ProductNDC": "72162-1098",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20070227",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040710",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE ANHYDROUS",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-05-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230926",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine Hydrochloride Topical Solution USP, 4% is indicated for the production of topical anesthesia of accessible mucous membranes of the oral and nasal cavities and proximal portions of the digestive tract.",
"Description": "Lidocaine Hydrochloride Topical Solution USP, 4% contains a local anesthetic agent and is administered topically. See INDICATIONS for specific uses. Lidocaine Hydrochloride Topical Solution USP, 4% contains lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the following structural formula. The 50 mL screw-cap bottle should not be autoclaved, because the closure employed cannot withstand autoclaving temperatures and pressures. Composition of Lidocaine Hydrochloride Topical Solution USP, 4%: Each mL contains lidocaine HCl, 40 mg, methylparaben, and sodium hydroxide and/or hydrochloric acid to adjust pH to 5.0 to 7.0. An aqueous solution. NOT FOR INJECTION."
},
{
"NDCCode": "72162-1108-2",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (72162-1108-2) ",
"NDC11Code": "72162-1108-02",
"ProductNDC": "72162-1108",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Trospium Chloride",
"NonProprietaryName": "Trospium Chloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20101117",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091573",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "TROSPIUM CHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231009",
"SamplePackage": "N",
"IndicationAndUsage": "Trospium Chloride Tablets are a muscarinic antagonist indicated for the treatment of overactive bladder (OAB) with symptoms of urge urinary incontinence, urgency, and urinary frequency.",
"Description": "Trospium chloride is a quaternary ammonium compound with the chemical name of Spiro[8-azoniabicyclo[3.2.1]octane-8,1'-pyrrolidinium], 3-[(hydroxydiphenylacetyl)oxy]-, chloride, (1α, 3β, 5α). The empirical formula of trospium chloride is C25H30ClNO3 and its molecular weight is 427.97. The structural formula of trospium chloride is represented below. Trospium chloride is a fine, colorless to slightly yellow, crystalline solid. The compound's solubility in water is approximately 1 g per 2 mL. Each Trospium Chloride Tablet contains 20 mg of trospium chloride, a muscarinic antagonist, for oral administration. Each tablet also contains the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, calcium carbonate, croscarmellose sodium, povidone, hypromellose, talc, stearic acid, titanium dioxide, colloidal silicon dioxide, magnesium stearate and polyethylene glycol 3350."
},
{
"NDCCode": "72162-1109-2",
"PackageDescription": "1 BOTTLE, GLASS in 1 CARTON (72162-1109-2) / 118 mL in 1 BOTTLE, GLASS",
"NDC11Code": "72162-1109-02",
"ProductNDC": "72162-1109",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Midazolam Hydrochloride",
"NonProprietaryName": "Midazolam Hydrochloride",
"DosageFormName": "SYRUP",
"RouteName": "ORAL",
"StartMarketingDate": "20050502",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076379",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "MIDAZOLAM HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2023-10-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231025",
"SamplePackage": "N",
"IndicationAndUsage": "Midazolam HCl syrup is indicated for use in pediatric patients for sedation, anxiolysis and amnesia prior to diagnostic, therapeutic or endoscopic procedures or before induction of anesthesia. Midazolam HCl syrup is intended for use in monitored settings only and not for chronic or home use [see WARNINGS].",
"Description": "Midazolam is a benzodiazepine available as midazolam HCl syrup for oral administration. Midazolam, a white to light yellow crystalline compound, is insoluble in water, but can be solubilized in aqueous solutions by formation of the hydrochloride salt in situ under acidic conditions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the molecular formula C18H13ClFN3·HCl, a calculated molecular weight of 362.25 and the following structural formula. Each mL of the syrup contains midazolam hydrochloride equivalent to 2 mg midazolam compounded with artificial bitterness modifier, citric acid anhydrous, D&C Red #33, edetate disodium, glycerin, mixed fruit flavor, sodium benzoate, sodium citrate, sorbitol, and water; the pH is adjusted to 2.8 to 3.6 with hydrochloric acid. Under the acidic conditions required to solubilize midazolam in the syrup, midazolam is present as an equilibrium mixture (shown below) of the closed ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the syrup, the solution may contain up to about 40% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart below plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 2.8 to 3.6. Above pH 5, at least 99% of the mixture is present in the closed-ring form."
},
{
"NDCCode": "72162-1117-2",
"PackageDescription": "1 BOTTLE, WITH APPLICATOR in 1 CARTON (72162-1117-2) / 15 mL in 1 BOTTLE, WITH APPLICATOR",
"NDC11Code": "72162-1117-02",
"ProductNDC": "72162-1117",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Podocon 25",
"NonProprietaryName": "Podophyllum Resin",
"DosageFormName": "TINCTURE",
"RouteName": "TOPICAL",
"StartMarketingDate": "19900901",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "PODOPHYLLUM RESIN",
"StrengthNumber": "1",
"StrengthUnit": "mg/4mL",
"Status": "Active",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241224",
"SamplePackage": "N",
"IndicationAndUsage": "Podocon-25® (25% podophyllin in benzoin tincture) is indicated for the removal of soft genital (venereal) warts (condylomata acuminata)(4).",
"Description": "Podocon-25® is composed of Podophyllin (Podophyllum Resin, American) 25% in Benzoin Tincture. Podophyllum Resin is the powdered mixture of resins removed from the May apple or Mandrake (Podophyllum peltatum Linne’), a perennial plant of northern and middle United States(1). The podophyllin resin used in this product is exclusively the American podophyllin (rather than the Indian resin). American podophyllin typically has a reduced level of podophyllotoxin (see below)."
},
{
"NDCCode": "72162-1119-2",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (72162-1119-2) / 1 mL in 1 VIAL, GLASS",
"NDC11Code": "72162-1119-02",
"ProductNDC": "72162-1119",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Testosterone Cypionate",
"NonProprietaryName": "Testosterone Cypionate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20140501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091244",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "TESTOSTERONE CYPIONATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Androgen Receptor Agonists [MoA], Androgen [EPC], Androstanes [CS]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-07-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250402",
"SamplePackage": "N",
"IndicationAndUsage": "Testosterone Cypionate Injection, USP is indicated for replacement therapy in the male in conditions associated with symptoms of deficiency, or absence of endogenous testosterone. : 1 1.Primary hypogonadism (congenital or acquired): testicular failure due to cryptorchidism, bilateral torsion, orchitis, vanishing testis syndrome; or orchidectomy., 2 2.Hypogonadotropic hypogonadism (congenital or acquired): gonadotropin or luteinizing hormone-releasing hormone (LHRH) deficiency, or pituitary-hypothalamic injury from tumors, trauma, or radiation.",
"Description": "Testosterone Cypionate Injection, USP for intramuscular injection, contains Testosterone Cypionate, USP which is the oil-soluble 17 (beta)-cyclopentylpropionate ester of the androgenic hormone testosterone. Testosterone Cypionate, USP is a white or creamy white crystalline powder, odorless or nearly so and stable in air. It is insoluble in water, freely soluble in alcohol, chloroform, dioxane, ether, and soluble in vegetable oils. The chemical name for Testosterone Cypionate, USP is androst-4-en-3-one,17-(3-cyclopentyl-1- oxopropoxy)-, (17ß)-. Its molecular formula is C27H40O3, and the molecular weight 412.61. The structural formula is represented below. Testosterone Cypionate Injection, USP is available in one strength, 200 mg/mL Testosterone Cypionate, USP. Each mL of the 200 mg/mL solution contains: 1 Testosterone Cypionate, USP 200 mg, 2 Benzyl Benzoate, USP 0.2 mL, 3 Cottonseed Oil, USP 560 mg, 4 Benzyl Alcohol, USP (as preservative) 9.45 mg."
},
{
"NDCCode": "72162-1123-2",
"PackageDescription": "118 mL in 1 BOTTLE, PLASTIC (72162-1123-2) ",
"NDC11Code": "72162-1123-02",
"ProductNDC": "72162-1123",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Brompheniramine Maleate, Pseudoephedrine Hydrochloride And Dextromethorphan Hydrobromide",
"NonProprietaryName": "Brompheniramine Maleate, Pseudoephedrine Hydrochloride And Dextromethorphan Hydrobromide",
"DosageFormName": "SYRUP",
"RouteName": "ORAL",
"StartMarketingDate": "20150206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205292",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "BROMPHENIRAMINE MALEATE; PSEUDOEPHEDRINE HYDROCHLORIDE; DEXTROMETHORPHAN HYDROBROMIDE",
"StrengthNumber": "2; 30; 10",
"StrengthUnit": "mg/5mL; mg/5mL; mg/5mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA], alpha-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230816",
"SamplePackage": "N",
"IndicationAndUsage": "For relief of coughs and upper respiratory symptoms, including nasal congestion, associated with allergy or the common cold.",
"Description": "Brompheniramine Maleate, Pseudoephedrine Hydrochloride and Dextromethorphan Hydrobromide Syrup is a clear, light pink syrup with a butterscotch flavor. Each 5 mL (1 teaspoonful) contains. Brompheniramine Maleate, USP ................. 2 mg. Pseudoephedrine Hydrochloride, USP ........ 30 mg. Dextromethorphan Hydrobromide, USP ...... 10 mg. Alcohol 0.95% v/v. In a palatable, aromatic vehicle. Inactive Ingredients: alcohol, artificial butterscotch flavor, citric acid anhydrous, glycerin, methylparaben, propylene glycol, purified water, sodium benzoate, sodium citrate, sucrose, and FD&C Red No. 40. It may contain 10% citric acid solution or 10% sodium citrate solution for pH adjustment. The pH range is between 3.0 and 6.0. Antihistamine/Nasal Decongestant/Antitussive syrup for oral administration."
},
{
"NDCCode": "72162-1124-2",
"PackageDescription": "15 g in 1 BOTTLE, PLASTIC (72162-1124-2) ",
"NDC11Code": "72162-1124-02",
"ProductNDC": "72162-1124",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nystop",
"NonProprietaryName": "Nystatin",
"DosageFormName": "POWDER",
"RouteName": "TOPICAL",
"StartMarketingDate": "19960816",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA064118",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "NYSTATIN",
"StrengthNumber": "100000",
"StrengthUnit": "[USP'U]/g",
"Pharm_Classes": "Polyene Antifungal [EPC], Polyenes [CS]",
"Status": "Active",
"LastUpdate": "2026-07-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241224",
"SamplePackage": "N",
"IndicationAndUsage": "Nystatin Topical Powder is indicated in the treatment of cutaneous or mucocutaneous mycotic infections caused by Candida albicans and other susceptible Candida species. This preparation is not indicated for systemic, oral, intravaginal or ophthalmic use.",
"Description": "Nystatin is a polyene antifungal antibiotic obtained from Streptomyces nursei. The molecular formula for Nystatin is C47H75NO17. The molecular weight of Nystatin is 926.1. Structural formula. Nystatin Topical Powder USP is for dermatologic use. Nystatin Topical Powder USP contains 100,000 USP nystatin units per gram dispersed in talc."
},
{
"NDCCode": "72162-1126-2",
"PackageDescription": "1 TUBE in 1 CARTON (72162-1126-2) / 45 g in 1 TUBE",
"NDC11Code": "72162-1126-02",
"ProductNDC": "72162-1126",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ciclopirox",
"NonProprietaryName": "Ciclopirox",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20090107",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078266",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "CICLOPIROX",
"StrengthNumber": "7.7",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Decreased DNA Replication [PE], Decreased Protein Synthesis [PE], Decreased RNA Replication [PE], Protein Synthesis Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240311",
"SamplePackage": "N",
"IndicationAndUsage": "Superficial Dermatophyte Infections. Ciclopirox Gel, 0.77% is indicated for the topical treatment of interdigital tinea pedis and tinea corporis due to Trichophyton rubrum, Trichophyton mentagrophytes, or Epidermophyton floccosum. Seborrheic Dermatitis. Ciclopirox Gel, 0.77% is indicated for the topical treatment of seborrheic dermatitis of the scalp.",
"Description": "Ciclopirox Gel, 0.77% contains a synthetic antifungal agent, ciclopirox. It is intended for topical dermatologic use only. Each gram of Ciclopirox Gel, 0.77% contains 7.70 mg of ciclopirox in a gel consisting of Purified Water USP, Isopropyl Alcohol USP, Octyldodecanol NF, Dimethicone Copolyol 190, Carbomer 980, Sodium Hydroxide NF, and Docusate Sodium USP. Ciclopirox Gel, 0.77% is a white, slightly fluid gel. The chemical name for ciclopirox is 6-cyclohexyl-1-hydroxy-4-methyl-2(1H)- pyridinone, with the empirical formula C12H17NO2 and a molecular weight of 207.27. The CAS Registry Number is [29342-05-0]. The chemical structure is."
},
{
"NDCCode": "72162-1128-2",
"PackageDescription": "10 mL in 1 BOTTLE, PLASTIC (72162-1128-2) ",
"NDC11Code": "72162-1128-02",
"ProductNDC": "72162-1128",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tobramycin And Dexamethasone",
"NonProprietaryName": "Tobramycin And Dexamethasone",
"DosageFormName": "SUSPENSION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20220317",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212715",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "TOBRAMYCIN; DEXAMETHASONE",
"StrengthNumber": "3; 1",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241224",
"SamplePackage": "N",
"IndicationAndUsage": "INDICATIONS AND USAGE: Tobramycin and dexamethasone ophthalmic suspension is indicated for steroid-responsive inflammatory ocular conditions for which a corticosteroid is indicated and where superficial bacterial ocular infection or a risk of bacterial ocular infection exists. Ocular steroids are indicated in inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe where the inherent risk of steroid use in certain infective conjunctivitides is accepted to obtain a diminution in edema and inflammation. They are also indicated in chronic anterior uveitis and corneal injury from chemical, radiation or thermal burns, or penetration of foreign bodies. The use of a combination drug with an anti-infective component is indicated where the risk of superficial ocular infection is high or where there is an expectation that potentially dangerous numbers of bacteria will be present in the eye. The particular anti-infective drug in this product is active against the following common bacterial eye pathogens. Staphylococci, including S. aureus and S. epidermidis (coagulase-positive and coagulase-negative), including penicillin-resistant strains. Streptococci, including some of the Group A-beta-hemolytic species, some nonhemolytic species, and some Streptococcus pneumoniae. Pseudomonas aeruginosa, Escherichia coli, Klebsiella pneumoniae, Enterobacter aerogenes, Proteus mirabilis, Morganella morganii, most Proteus vulgaris strains, Haemophilus influenzae and H. aegyptius, Moraxella lacunata, Acinetobacter calcoaceticus and some Neisseria species.",
"Description": "DESCRIPTION: Tobramycin and dexamethasone ophthalmic suspension USP is a sterile, multiple dose antibiotic and steroid combination for topical ophthalmic use with a pH of approximately 5.5 and an osmolality of approximately 300 mOsm/kg. The chemical structures for tobramycin and dexamethasone are presented below. Tobramycin. Empirical Formula: C18H37N5O9. Chemical Name: O-3-Amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine. MW: 467.52. Dexamethasone. Empirical Formula: C22H29FO5. Chemical Name: 9-Fluoro-11β,17,21-trihydroxy-16α-methylpregna-1,4-diene-3,20-dione. MW: 392.47. Each mL of Tobramycin and dexamethasone ophthalmic suspension contains: Actives: tobramycin 0.3% (3 mg) and dexamethasone 0.1% (1 mg). Preservative: benzalkonium chloride 0.01%. Inactives: edetate disodium dihydrate, hydroxyethyl cellulose, sodium chloride, sodium sulfate anhydrous, sulfuric acid and/or sodium hydroxide (to adjust pH), tyloxapol, and water for injection."
},
{
"NDCCode": "72162-1128-7",
"PackageDescription": "2.5 mL in 1 BOTTLE, PLASTIC (72162-1128-7) ",
"NDC11Code": "72162-1128-07",
"ProductNDC": "72162-1128",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tobramycin And Dexamethasone",
"NonProprietaryName": "Tobramycin And Dexamethasone",
"DosageFormName": "SUSPENSION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20220317",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212715",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "TOBRAMYCIN; DEXAMETHASONE",
"StrengthNumber": "3; 1",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241224",
"SamplePackage": "N",
"IndicationAndUsage": "INDICATIONS AND USAGE: Tobramycin and dexamethasone ophthalmic suspension is indicated for steroid-responsive inflammatory ocular conditions for which a corticosteroid is indicated and where superficial bacterial ocular infection or a risk of bacterial ocular infection exists. Ocular steroids are indicated in inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe where the inherent risk of steroid use in certain infective conjunctivitides is accepted to obtain a diminution in edema and inflammation. They are also indicated in chronic anterior uveitis and corneal injury from chemical, radiation or thermal burns, or penetration of foreign bodies. The use of a combination drug with an anti-infective component is indicated where the risk of superficial ocular infection is high or where there is an expectation that potentially dangerous numbers of bacteria will be present in the eye. The particular anti-infective drug in this product is active against the following common bacterial eye pathogens. Staphylococci, including S. aureus and S. epidermidis (coagulase-positive and coagulase-negative), including penicillin-resistant strains. Streptococci, including some of the Group A-beta-hemolytic species, some nonhemolytic species, and some Streptococcus pneumoniae. Pseudomonas aeruginosa, Escherichia coli, Klebsiella pneumoniae, Enterobacter aerogenes, Proteus mirabilis, Morganella morganii, most Proteus vulgaris strains, Haemophilus influenzae and H. aegyptius, Moraxella lacunata, Acinetobacter calcoaceticus and some Neisseria species.",
"Description": "DESCRIPTION: Tobramycin and dexamethasone ophthalmic suspension USP is a sterile, multiple dose antibiotic and steroid combination for topical ophthalmic use with a pH of approximately 5.5 and an osmolality of approximately 300 mOsm/kg. The chemical structures for tobramycin and dexamethasone are presented below. Tobramycin. Empirical Formula: C18H37N5O9. Chemical Name: O-3-Amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine. MW: 467.52. Dexamethasone. Empirical Formula: C22H29FO5. Chemical Name: 9-Fluoro-11β,17,21-trihydroxy-16α-methylpregna-1,4-diene-3,20-dione. MW: 392.47. Each mL of Tobramycin and dexamethasone ophthalmic suspension contains: Actives: tobramycin 0.3% (3 mg) and dexamethasone 0.1% (1 mg). Preservative: benzalkonium chloride 0.01%. Inactives: edetate disodium dihydrate, hydroxyethyl cellulose, sodium chloride, sodium sulfate anhydrous, sulfuric acid and/or sodium hydroxide (to adjust pH), tyloxapol, and water for injection."
},
{
"NDCCode": "72162-1161-2",
"PackageDescription": "1 DOSE PACK in 1 CARTON (72162-1161-2) / 21 TABLET in 1 DOSE PACK",
"NDC11Code": "72162-1161-02",
"ProductNDC": "72162-1161",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methylprednisolone",
"NonProprietaryName": "Methylprednisolone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19981222",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040183",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "METHYLPREDNISOLONE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2023-09-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230926",
"SamplePackage": "N",
"IndicationAndUsage": "Methylprednisolone tablets are indicated in the following conditions. 1. Endocrine Disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance). Congenital adrenal hyperplasia. Nonsuppurative thyroiditis. Hypercalcemia associated with cancer. 2. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in. Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). Ankylosing spondylitis. Acute and subacute bursitis. Synovitis of osteoarthritis. Acute nonspecific tenosynovitis. Post-traumatic osteoarthritis. Psoriatic arthritis. Epicondylitis. Acute gouty arthritis. 3. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of. Systemic lupus erythematosus. Systemic dermatomyositis (polymyositis). Acute rheumatic carditis. 4. Dermatologic Diseases. Bullous dermatitis herpetiformis. Severe erythema multiforme. (Stevens-Johnson syndrome). Severe seborrheic dermatitis. Exfoliative dermatitis. Mycosis fungoides. Pemphigus. Severe psoriasis. 5. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment. Seasonal or perennial allergic rhinitis. Drug hypersensitivity reactions. Serum sickness. Contact dermatitis. Bronchial asthma. Atopic dermatitis. 6. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as. Allergic corneal marginal ulcers. Herpes zoster ophthalmicus. Anterior segment inflammation. Diffuse posterior uveitis and choroiditis. Sympathetic ophthalmia. Keratitis. Optic neuritis. Allergic conjunctivitis. Chorioretinitis. Iritis and iridocyclitis. 7. Respiratory Diseases. Symptomatic sarcoidosis. Berylliosis. Loeffler’s syndrome not manageable by other means. Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy. Aspiration pneumonitis. 8. Hematologic Disorders. Idiopathic thrombocytopenic purpura in adults. Secondary thrombocytopenia in adults. Acquired (autoimmune) hemolytic anemia. Erythroblastopenia (RBC anemia). Congenital (erythroid) hypoplastic anemia. 9. Neoplastic Diseases. For palliative management of. Leukemias and lymphomas in adults. Acute leukemia of childhood. 10. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 11. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in. Ulcerative colitis. Regional enteritis. 12. Nervous System. Acute exacerbations of multiple sclerosis. 13. Miscellaneous. Tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Trichinosis with neurologic or myocardial involvement.",
"Description": "Methylprednisolone tablets, USP contain methylprednisolone, USP which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Methylprednisolone, USP occurs as a white to practically white, crystalline powder. It is sparingly soluble in alcohol, in dioxane, and in methanol, slightly soluble in acetone, and in chloroform, and very slightly soluble in ether. It is practically insoluble in water. The chemical name for methylprednisolone, USP is pregna-1,4-diene-3,20-dione, 11,17,21-trihydroxy-6-methyl-, (6α,11β)- and the molecular weight is 374.48. The structural formula is represented below. Each methylprednisolone tablet, USP for oral administration contains 4 mg of methylprednisolone, USP. Inactive ingredients: magnesium stearate, microcrystalline cellulose and sodium starch glycolate."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>72162-2270-2</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (72162-2270-2) / 22 g in 1 TUBE</PackageDescription>
<NDC11Code>72162-2270-02</NDC11Code>
<ProductNDC>72162-2270</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mupirocin</ProprietaryName>
<NonProprietaryName>Mupirocin</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20091030</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065123</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>MUPIROCIN</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>RNA Synthetase Inhibitor Antibacterial [EPC], RNA Synthetase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240312</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mupirocin Ointment USP, 2% is indicated for the topical treatment of impetigo due to susceptible isolates of Staphylococcus aureus (S. aureus) and Streptococcus pyogenes (S. pyogenes).</IndicationAndUsage>
<Description>Mupirocin Ointment USP, 2% contains the RNA synthetase inhibitor antibacterial, mupirocin. The chemical name is (E)-(2S,3R,4R,5S)-5-[(2S,3S,4S,5S)-2,3-epoxy-5-hydroxy-4-methylhexyl] tetrahydro-3,4-dihydroxy-β-methyl-2H-pyran-2-crotonic acid, ester with 9-hydroxynonanoic acid. The molecular formula of mupirocin is C26H44O9, and the molecular weight is 500.6. The structural formula of mupirocin is. Figure 1. Structure of Murpirocin. Each gram of Mupirocin Ointment USP, 2% contains 20 mg mupirocin in a water-miscible ointment base (polyethylene glycol ointment, NF) consisting of polyethylene glycol 400 and polyethylene glycol 3350.</Description>
</NDC>
<NDC>
<NDCCode>36987-2270-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (36987-2270-2)</PackageDescription>
<NDC11Code>36987-2270-02</NDC11Code>
<ProductNDC>36987-2270</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Bermuda Grass Pollen</ProprietaryName>
<NonProprietaryName>Standardized Bermuda Grass Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980210</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102195</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>CYNODON DACTYLON POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Standardized Pollen Extract is intended for use in the diagnosis and therapy of pollen allergic patients as established by allergy history and skin test reactivity. Standardized Grass Pollen extracts labeled in BAU/mL are not interchangeable with Grass Pollen extracts labeled in AU/mL or with non-standardized Grass Pollen extracts. The 10,000 BAU/mL dose form is indicated for percutaneous testing. If negative, 100,000 BAU/mL dose form can be used for percutaneous testing. For immunotherapy, availability of 10,000 and 100,000 BAU/mL dosages facilitates safe switching. (See Dosage & Administration). The use of standardized grass pollen extracts is indicated for hyposensitization treatment and may be used as part of the over-all management of the allergic patient. Treatment of grass sensitive patients consists of using specific standardized grass products of up to and including doses of 100,000 BAU/mL (up to 10,000 BAU/mL for Bermuda grass) or stock mixtures of standardized grass products. Stock mixtures of standardized grass extracts are particularly useful in hyposensitization treatment when multiple allergies to grasses are diagnosed. For previously untreated patients, the 10,000 BAU/mL concentrates can be used to formulate dosages. If tolerated, the concentrates can be inceased to 100,000 BAU/mL dose formulation.</IndicationAndUsage>
<Description>Standardized Grass Pollen Extracts include: Orchard (Dactylis glomerata), Perennial Rye (Lolium perenne), Timothy (Phleum pratense), Redtop (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda (Cynodon dactylon), Meadow Fescue (Festuca elatior), Sweet Vernal (Anthoxanthum odoratum). The standardized grass pollen extract is prepared by extracting raw pollen material at a ratio of either 1:5 w/v, 1:6.66 w/v or 1:10 w/v in Cocas fluid containing 0.5% NaCl, 0.275% NaHCO3, WFI and 0.4% phenol as preservative. Following extraction, a calculated amount of glycerin is added to make a 50%(v/v) glycerinated solution. Standardized Grass Pollen extracts have potency designations of 10,000 BAU/mL and 100,000 BAU/mL except Bermuda Grass (10,000 BAU/mL only). Extracts with a potency of 10,000 BAU/mL are diluted from the 100,000 BAU/mL lots with Glycerol Saline 50%(v/v). The Glycerol Saline 50%(v/v) solution consists of Glycerin and Salts and Buffered Diluent whose ingredients are 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI and 0.4% phenol as a preservative. All extracts are aseptically filled in sterile containers. Standardized pollen extracts are intended for administration by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injection. Standardized grass pollen extracts labeled in BAU/mL are not interchangeable with grass pollen extracts labeled in AU/mL or with non-standardized grass pollen extracts. The Bioequivalent Allergy Unit (BAU), the potency unit used for all Standardized Pollen Extracts, replaces the previous unitage for these products. Bioequivalent Allergy Units were assigned to the FDA, Center for Biologics Evaluation and Research (CBER) reference extracts, based on quantitative intradermal skin test results. BAU's are intended to assure that the labeled unitage of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted one half million fold to produce an intradermal sum of erythema diameter response of 50mm in highly puncture reactive subjects. 100,000 BAU/mL can be diluted 1:5 million fold to yield the same intradermal response.(2) The assignment of BAU/mL to standardized grass pollen extracts, is accomplished by an ELISA assay comparing the extract to the CBER reference. Previously, the potency / concentration of grass mixtures was designated based on the manufacturing strength, e.g. 1:10 w/v or 1:20 w/v, or in PNU's/mL. For grass mixtures containing standardized extracts, the potency will reflect the contribution of each individual component in the mixture, i.e., the actual potency of each component will be listed on a per mL basis. In addition, because the individual components may be cross-reactive, an additional caution statement, "due to cross reactivity, total potency may be 100,000 BAU/mL," will be added to the label.</Description>
</NDC>
<NDC>
<NDCCode>37662-2270-2</NDCCode>
<PackageDescription>1200 PELLET in 1 BOTTLE, GLASS (37662-2270-2) </PackageDescription>
<NDC11Code>37662-2270-02</NDC11Code>
<ProductNDC>37662-2270</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Scutellaria Lateriflora</ProprietaryName>
<NonProprietaryName>Scutellaria Lateriflora</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230109</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>SCUTELLARIA LATERIFLORA WHOLE</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-01-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230109</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>55714-2270-2</NDCCode>
<PackageDescription>59.14 mL in 1 BOTTLE, GLASS (55714-2270-2)</PackageDescription>
<NDC11Code>55714-2270-02</NDC11Code>
<ProductNDC>55714-2270</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Warts - Moles - Skin Tags</ProprietaryName>
<NonProprietaryName>Antimon. Crud., Bryonia, Calc.carb., Causticum, Dulcamara, Graphites, Lycopodium, Merc. Sulph. Rub., Nat. Carb., Nitricum Ac., Nux Vom., Rhus Toxicodendron, Sabina, Sepia, Silicea, Staphysag., Sulphur, Thuja Occ., Taraxacum</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110301</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Newton Laboratories, Inc.</LabelerName>
<SubstanceName>ANTIMONY TRISULFIDE; BRYONIA ALBA ROOT; OYSTER SHELL CALCIUM CARBONATE, CRUDE; CAUSTICUM; SOLANUM DULCAMARA TOP; GRAPHITE; LYCOPODIUM CLAVATUM SPORE; MERCURIC SULFIDE; SODIUM CARBONATE; NITRIC ACID; STRYCHNOS NUX-VOMICA SEED; TOXICODENDRON PUBESCENS LEAF; JUNIPERUS SABINA LEAFY TWIG; SEPIA OFFICINALIS JUICE; SILICON DIOXIDE; DELPHINIUM STAPHISAGRIA SEED; SULFUR; THUJA OCCIDENTALIS LEAFY TWIG; TARAXACUM OFFICINALE</SubstanceName>
<StrengthNumber>15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 3</StrengthNumber>
<StrengthUnit>[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Warts - Moles - Skin Tags Formulated for various types of skin conditions such as warts (including genital), moles, keloids, molluscum and skin tags.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>64942-2270-2</NDCCode>
<PackageDescription>1 CONTAINER in 1 CARTON (64942-2270-2) / 48 g in 1 CONTAINER (64942-2270-1) </PackageDescription>
<NDC11Code>64942-2270-02</NDC11Code>
<ProductNDC>64942-2270</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Dove</ProprietaryName>
<NonProprietaryName>Clinical Protection Skin Renew Antiperspirant And Deodorant</NonProprietaryName>
<DosageFormName>STICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20230414</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M019</ApplicationNumber>
<LabelerName>Conopco Inc. d/b/a/ Unilever</LabelerName>
<SubstanceName>ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-04-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230414</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage> reduces underarm wetness extra effective.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>71335-2270-2</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (71335-2270-2) </PackageDescription>
<NDC11Code>71335-2270-02</NDC11Code>
<ProductNDC>71335-2270</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Butalbital, Acetaminophen And Caffeine</ProprietaryName>
<NonProprietaryName>Butalbital, Acetaminophen And Caffeine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220629</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040864</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>BUTALBITAL; ACETAMINOPHEN; CAFFEINE</SubstanceName>
<StrengthNumber>50; 325; 40</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Barbiturate [EPC], Barbiturates [CS], Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Methylxanthine [EPC], Xanthines [CS]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2023-12-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Butalbital, acetaminophen and caffeine tablets are indicated for the relief of the symptom complex of tension (or muscle contraction) headache. Evidence supporting the efficacy and safety of butalbital, acetaminophen, and caffeine tablets in the treatment of multiple recurrent headaches is unavailable. Caution in this regard is required because butalbital is habit-forming and potentially abusable.</IndicationAndUsage>
<Description>Butalbital, Acetaminophen and Caffeine Tablets, USP are supplied in tablet form for oral administration. Each tablet contains the following active ingredients. Butalbital, USP..............................................................50 mg. Acetaminophen, USP....................................................325 mg. Caffeine, USP................................................................40 mg. Inactive Ingredients: microcrystalline cellulose, sodium starch glycolate and magnesium stearate. Butalbital (5-allyl-5-isobutylbarbituric acid), is a short to intermediate-acting barbiturate. It has the following structural formula:. C 11H 16N 2O 3 M.W. = 224.26. Acetaminophen (4'-hydroxyacetanilide), is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. C 8H 9NO 2 M.W. = 151.16. Caffeine (1,3,7-trimethylxanthine), is a central nervous system stimulant. It has the following structural formula. C 8H 10N 4O 2 M.W. = 194.19.</Description>
</NDC>
<NDC>
<NDCCode>0069-2270-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (0069-2270-30) </PackageDescription>
<NDC11Code>00069-2270-30</NDC11Code>
<ProductNDC>0069-2270</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Caduet</ProprietaryName>
<NonProprietaryName>Amlodipine Besylate And Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20040130</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021540</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE; ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>10; 80</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-04-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20040130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CADUET (amlodipine and atorvastatin) is indicated in patients for whom treatment with both amlodipine and atorvastatin is appropriate.</IndicationAndUsage>
<Description>CADUET (amlodipine and atorvastatin) tablets combine the calcium channel blocker amlodipine besylate with the HMG CoA-reductase inhibitor atorvastatin calcium. Amlodipine besylate is chemically described as 3-ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(o-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its empirical formula is C20H25ClN2O5∙C6H6O3S. Atorvastatin calcium is chemically described as [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. Its empirical formula is (C33H34 FN2O5)2Ca∙3H2O. The structural formulae for amlodipine besylate and atorvastatin calcium are shown below. CADUET contains amlodipine besylate, a white to off-white crystalline powder, and atorvastatin calcium, also a white to off-white crystalline powder. Amlodipine besylate has a molecular weight of 567.1 and atorvastatin calcium has a molecular weight of 1209.42. Amlodipine besylate is slightly soluble in water and sparingly soluble in ethanol. Atorvastatin calcium is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in ethanol; and freely soluble in methanol. CADUET is available as film-coated tablets containing: 1 5 mg amlodipine equivalent to 6.9 mg amlodipine besylate and 10 mg atorvastatin equivalent to 10.4 mg atorvastatin calcium., 2 5 mg amlodipine equivalent to 6.9 mg amlodipine besylate and 20 mg atorvastatin equivalent to 20.7 mg atorvastatin calcium., 3 5 mg amlodipine equivalent to 6.9 mg amlodipine besylate and 40 mg atorvastatin equivalent to 41.4 mg atorvastatin calcium., 4 5 mg amlodipine equivalent to 6.9 mg amlodipine besylate and 80 mg atorvastatin equivalent to 82.9 mg atorvastatin calcium., 5 10 mg amlodipine equivalent to 13.9 mg amlodipine besylate and 10 mg atorvastatin equivalent to 10.4 mg atorvastatin calcium., 6 10 mg amlodipine equivalent to 13.9 mg amlodipine besylate and 20 mg atorvastatin equivalent to 20.7 mg atorvastatin calcium., 7 10 mg amlodipine equivalent to 13.9 mg amlodipine besylate and 40 mg atorvastatin equivalent to 41.4 mg atorvastatin calcium., 8 10 mg amlodipine equivalent to 13.9 mg amlodipine besylate and 80 mg atorvastatin equivalent to 82.9 mg atorvastatin calcium.</Description>
</NDC>
<NDC>
<NDCCode>0093-2270-34</NDCCode>
<PackageDescription>20 TABLET, CHEWABLE in 1 BOTTLE (0093-2270-34) </PackageDescription>
<NDC11Code>00093-2270-34</NDC11Code>
<ProductNDC>0093-2270</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin And Clavulanate Potassium</ProprietaryName>
<NonProprietaryName>Amoxicillin And Clavulanate Potassium</NonProprietaryName>
<DosageFormName>TABLET, CHEWABLE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050322</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065205</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>AMOXICILLIN; CLAVULANATE POTASSIUM</SubstanceName>
<StrengthNumber>200; 28.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-09-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050322</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amoxicillin and clavulanate potassium tablets, amoxicillin and clavulanate potassium for oral suspension, and amoxicillin and clavulanate potassium tablets (chewable) are indicated for the treatment of infections in adults and pediatric patients, due to susceptible isolates of the designated bacteria in the conditions listed below: 1 Lower Respiratory Tract Infections – caused by beta–lactamase–producing isolates of Haemophilus influenzae and Moraxella catarrhalis. , 2 Acute Bacterial Otitis Media – caused by beta–lactamase–producing isolates of H. influenzae and M. catarrhalis. , 3 Sinusitis – caused by beta–lactamase–producing isolates of H. influenzae and M. catarrhalis. , 4 Skin and Skin Structure Infections – caused by beta–lactamase–producing isolates of Staphylococcus aureus, Escherichia coli, and Klebsiella species. , 5 Urinary Tract Infections – caused by beta–lactamase–producing isolates of E. coli, Klebsiella species, and Enterobacter species. .</IndicationAndUsage>
<Description>Amoxicillin and clavulanate potassium tablets, amoxicillin and clavulanate potassium for oral suspension, and amoxicillin and clavulanate potassium tablets (chewable) are oral antibacterial combinations consisting of the semisynthetic antibiotic amoxicillin, USP and the beta–lactamase inhibitor, clavulanate potassium, USP (the potassium salt of clavulanic acid). Amoxicillin, USP is an analog of ampicillin, derived from the basic penicillin nucleus, 6–aminopenicillanic acid. Chemically, amoxicillin, USP is (2S,5R,6R)–6–[(R)–(–)–2–Amino–2–(p–hydroxyphenyl)acetamido]–3,3–dimethyl–7–oxo–4–thia–1–azabicyclo[3.2.0]heptane–2–carboxylic acid trihydrate and has the following structural formula. C16H19N3O5S3H2O M.W. 419.45. Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a beta-lactam structurally related to the penicillins and possesses the ability to inactivate some beta-lactamases by blocking the active sites of these enzymes. Chemically, clavulanate potassium, USP is potassium (Z)-(2R,5R)-3-(2-hydroxyethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate, and has the following structural formula. C8H8KNO5 M.W. 237.25. Amoxicillin and Clavulanate Potassium Tablets, USP: 1 500 mg/125 mg: Each tablet contains 500 mg of amoxicillin, USP as the trihydrate, and 125 mg of clavulanic acid (equivalent to 149 mg of clavulanate potassium)., 2 875 mg/125 mg: Each tablet contains 875 mg of amoxicillin, USP as the trihydrate, and 125 mg of clavulanic acid (equivalent to 149 mg of clavulanate potassium).</Description>
</NDC>
<NDC>
<NDCCode>0781-2270-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (0781-2270-01) </PackageDescription>
<NDC11Code>00781-2270-01</NDC11Code>
<ProductNDC>0781-2270</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Butalbital, Aspirin, And Caffeine</ProprietaryName>
<NonProprietaryName>Butalbital, Aspirin, And Caffeine</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240903</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA086996</ApplicationNumber>
<LabelerName>Sandoz Inc</LabelerName>
<SubstanceName>BUTALBITAL; ASPIRIN; CAFFEINE</SubstanceName>
<StrengthNumber>50; 325; 40</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Barbiturate [EPC], Barbiturates [CS], Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Cyclooxygenase Inhibitors [MoA], Decreased Platelet Aggregation [PE], Decreased Prostaglandin Production [PE], Methylxanthine [EPC], Nonsteroidal Anti-inflammatory Drug [EPC], Platelet Aggregation Inhibitor [EPC], Xanthines [CS]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-11-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240903</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Butalbital, aspirin, and caffeine capsules are indicated for the relief of the symptom complex of tension (or muscle contraction) headache. Evidence supporting the efficacy and safety of butalbital, aspirin, and caffeine capsules in the treatment of multiple recurrent headaches is unavailable. Caution in this regard is required because butalbital is habit-forming and potentially abusable.</IndicationAndUsage>
<Description>Butalbital, aspirin, and caffeine capsules, USP are supplied in capsule form for oral administration. Each capsule contains the following active ingredients:butalbital, USP 50 mg. aspirin, USP 325 mg. caffeine, USP 40 mg. Butalbital (5-allyl-5-isobutylbarbituric acid) is a short- to intermediate-acting barbiturate. It has the following. Molecular Formula: C11H16N2O3. Molecular Weight: 224.26. Structural Formula. Aspirin (benzoic acid, 2-(acetyloxy)-) is an analgesic, antipyretic, and anti-inflammatory. It has the following. Molecular Formula: C9H8O4. Molecular Weight: 180.16. Structural Formula. Caffeine (1, 3, 7-trimethylxanthine) is a central nervous system stimulant. It has the following. Molecular Formula: C8H10N4O2. Molecular Weight: 194.19. Structural Formula. Inactive Ingredients: pregelatinized starch, microcrystalline cellulose, sodium starch glycolate, trimyristin, talc, colloidal silicon dioxide, D&C Yellow No. 10, FD&C Green No. 3, and gelatin. The capsule imprinting ink contains: shellac glaze in ethanol, iron oxide black, n-butyl alcohol, propylene glycol, ethanol, methanol, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, and D&C Yellow No.10 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>36987-2270-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (36987-2270-1)</PackageDescription>
<NDC11Code>36987-2270-01</NDC11Code>
<ProductNDC>36987-2270</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Bermuda Grass Pollen</ProprietaryName>
<NonProprietaryName>Standardized Bermuda Grass Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980210</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102195</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>CYNODON DACTYLON POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Standardized Pollen Extract is intended for use in the diagnosis and therapy of pollen allergic patients as established by allergy history and skin test reactivity. Standardized Grass Pollen extracts labeled in BAU/mL are not interchangeable with Grass Pollen extracts labeled in AU/mL or with non-standardized Grass Pollen extracts. The 10,000 BAU/mL dose form is indicated for percutaneous testing. If negative, 100,000 BAU/mL dose form can be used for percutaneous testing. For immunotherapy, availability of 10,000 and 100,000 BAU/mL dosages facilitates safe switching. (See Dosage & Administration). The use of standardized grass pollen extracts is indicated for hyposensitization treatment and may be used as part of the over-all management of the allergic patient. Treatment of grass sensitive patients consists of using specific standardized grass products of up to and including doses of 100,000 BAU/mL (up to 10,000 BAU/mL for Bermuda grass) or stock mixtures of standardized grass products. Stock mixtures of standardized grass extracts are particularly useful in hyposensitization treatment when multiple allergies to grasses are diagnosed. For previously untreated patients, the 10,000 BAU/mL concentrates can be used to formulate dosages. If tolerated, the concentrates can be inceased to 100,000 BAU/mL dose formulation.</IndicationAndUsage>
<Description>Standardized Grass Pollen Extracts include: Orchard (Dactylis glomerata), Perennial Rye (Lolium perenne), Timothy (Phleum pratense), Redtop (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda (Cynodon dactylon), Meadow Fescue (Festuca elatior), Sweet Vernal (Anthoxanthum odoratum). The standardized grass pollen extract is prepared by extracting raw pollen material at a ratio of either 1:5 w/v, 1:6.66 w/v or 1:10 w/v in Cocas fluid containing 0.5% NaCl, 0.275% NaHCO3, WFI and 0.4% phenol as preservative. Following extraction, a calculated amount of glycerin is added to make a 50%(v/v) glycerinated solution. Standardized Grass Pollen extracts have potency designations of 10,000 BAU/mL and 100,000 BAU/mL except Bermuda Grass (10,000 BAU/mL only). Extracts with a potency of 10,000 BAU/mL are diluted from the 100,000 BAU/mL lots with Glycerol Saline 50%(v/v). The Glycerol Saline 50%(v/v) solution consists of Glycerin and Salts and Buffered Diluent whose ingredients are 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI and 0.4% phenol as a preservative. All extracts are aseptically filled in sterile containers. Standardized pollen extracts are intended for administration by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injection. Standardized grass pollen extracts labeled in BAU/mL are not interchangeable with grass pollen extracts labeled in AU/mL or with non-standardized grass pollen extracts. The Bioequivalent Allergy Unit (BAU), the potency unit used for all Standardized Pollen Extracts, replaces the previous unitage for these products. Bioequivalent Allergy Units were assigned to the FDA, Center for Biologics Evaluation and Research (CBER) reference extracts, based on quantitative intradermal skin test results. BAU's are intended to assure that the labeled unitage of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted one half million fold to produce an intradermal sum of erythema diameter response of 50mm in highly puncture reactive subjects. 100,000 BAU/mL can be diluted 1:5 million fold to yield the same intradermal response.(2) The assignment of BAU/mL to standardized grass pollen extracts, is accomplished by an ELISA assay comparing the extract to the CBER reference. Previously, the potency / concentration of grass mixtures was designated based on the manufacturing strength, e.g. 1:10 w/v or 1:20 w/v, or in PNU's/mL. For grass mixtures containing standardized extracts, the potency will reflect the contribution of each individual component in the mixture, i.e., the actual potency of each component will be listed on a per mL basis. In addition, because the individual components may be cross-reactive, an additional caution statement, "due to cross reactivity, total potency may be 100,000 BAU/mL," will be added to the label.</Description>
</NDC>
<NDC>
<NDCCode>36987-2270-3</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (36987-2270-3)</PackageDescription>
<NDC11Code>36987-2270-03</NDC11Code>
<ProductNDC>36987-2270</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Bermuda Grass Pollen</ProprietaryName>
<NonProprietaryName>Standardized Bermuda Grass Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980210</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102195</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>CYNODON DACTYLON POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Standardized Pollen Extract is intended for use in the diagnosis and therapy of pollen allergic patients as established by allergy history and skin test reactivity. Standardized Grass Pollen extracts labeled in BAU/mL are not interchangeable with Grass Pollen extracts labeled in AU/mL or with non-standardized Grass Pollen extracts. The 10,000 BAU/mL dose form is indicated for percutaneous testing. If negative, 100,000 BAU/mL dose form can be used for percutaneous testing. For immunotherapy, availability of 10,000 and 100,000 BAU/mL dosages facilitates safe switching. (See Dosage & Administration). The use of standardized grass pollen extracts is indicated for hyposensitization treatment and may be used as part of the over-all management of the allergic patient. Treatment of grass sensitive patients consists of using specific standardized grass products of up to and including doses of 100,000 BAU/mL (up to 10,000 BAU/mL for Bermuda grass) or stock mixtures of standardized grass products. Stock mixtures of standardized grass extracts are particularly useful in hyposensitization treatment when multiple allergies to grasses are diagnosed. For previously untreated patients, the 10,000 BAU/mL concentrates can be used to formulate dosages. If tolerated, the concentrates can be inceased to 100,000 BAU/mL dose formulation.</IndicationAndUsage>
<Description>Standardized Grass Pollen Extracts include: Orchard (Dactylis glomerata), Perennial Rye (Lolium perenne), Timothy (Phleum pratense), Redtop (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda (Cynodon dactylon), Meadow Fescue (Festuca elatior), Sweet Vernal (Anthoxanthum odoratum). The standardized grass pollen extract is prepared by extracting raw pollen material at a ratio of either 1:5 w/v, 1:6.66 w/v or 1:10 w/v in Cocas fluid containing 0.5% NaCl, 0.275% NaHCO3, WFI and 0.4% phenol as preservative. Following extraction, a calculated amount of glycerin is added to make a 50%(v/v) glycerinated solution. Standardized Grass Pollen extracts have potency designations of 10,000 BAU/mL and 100,000 BAU/mL except Bermuda Grass (10,000 BAU/mL only). Extracts with a potency of 10,000 BAU/mL are diluted from the 100,000 BAU/mL lots with Glycerol Saline 50%(v/v). The Glycerol Saline 50%(v/v) solution consists of Glycerin and Salts and Buffered Diluent whose ingredients are 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI and 0.4% phenol as a preservative. All extracts are aseptically filled in sterile containers. Standardized pollen extracts are intended for administration by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injection. Standardized grass pollen extracts labeled in BAU/mL are not interchangeable with grass pollen extracts labeled in AU/mL or with non-standardized grass pollen extracts. The Bioequivalent Allergy Unit (BAU), the potency unit used for all Standardized Pollen Extracts, replaces the previous unitage for these products. Bioequivalent Allergy Units were assigned to the FDA, Center for Biologics Evaluation and Research (CBER) reference extracts, based on quantitative intradermal skin test results. BAU's are intended to assure that the labeled unitage of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted one half million fold to produce an intradermal sum of erythema diameter response of 50mm in highly puncture reactive subjects. 100,000 BAU/mL can be diluted 1:5 million fold to yield the same intradermal response.(2) The assignment of BAU/mL to standardized grass pollen extracts, is accomplished by an ELISA assay comparing the extract to the CBER reference. Previously, the potency / concentration of grass mixtures was designated based on the manufacturing strength, e.g. 1:10 w/v or 1:20 w/v, or in PNU's/mL. For grass mixtures containing standardized extracts, the potency will reflect the contribution of each individual component in the mixture, i.e., the actual potency of each component will be listed on a per mL basis. In addition, because the individual components may be cross-reactive, an additional caution statement, "due to cross reactivity, total potency may be 100,000 BAU/mL," will be added to the label.</Description>
</NDC>
<NDC>
<NDCCode>36987-2270-4</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (36987-2270-4)</PackageDescription>
<NDC11Code>36987-2270-04</NDC11Code>
<ProductNDC>36987-2270</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Bermuda Grass Pollen</ProprietaryName>
<NonProprietaryName>Standardized Bermuda Grass Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980210</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102195</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>CYNODON DACTYLON POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Standardized Pollen Extract is intended for use in the diagnosis and therapy of pollen allergic patients as established by allergy history and skin test reactivity. Standardized Grass Pollen extracts labeled in BAU/mL are not interchangeable with Grass Pollen extracts labeled in AU/mL or with non-standardized Grass Pollen extracts. The 10,000 BAU/mL dose form is indicated for percutaneous testing. If negative, 100,000 BAU/mL dose form can be used for percutaneous testing. For immunotherapy, availability of 10,000 and 100,000 BAU/mL dosages facilitates safe switching. (See Dosage & Administration). The use of standardized grass pollen extracts is indicated for hyposensitization treatment and may be used as part of the over-all management of the allergic patient. Treatment of grass sensitive patients consists of using specific standardized grass products of up to and including doses of 100,000 BAU/mL (up to 10,000 BAU/mL for Bermuda grass) or stock mixtures of standardized grass products. Stock mixtures of standardized grass extracts are particularly useful in hyposensitization treatment when multiple allergies to grasses are diagnosed. For previously untreated patients, the 10,000 BAU/mL concentrates can be used to formulate dosages. If tolerated, the concentrates can be inceased to 100,000 BAU/mL dose formulation.</IndicationAndUsage>
<Description>Standardized Grass Pollen Extracts include: Orchard (Dactylis glomerata), Perennial Rye (Lolium perenne), Timothy (Phleum pratense), Redtop (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda (Cynodon dactylon), Meadow Fescue (Festuca elatior), Sweet Vernal (Anthoxanthum odoratum). The standardized grass pollen extract is prepared by extracting raw pollen material at a ratio of either 1:5 w/v, 1:6.66 w/v or 1:10 w/v in Cocas fluid containing 0.5% NaCl, 0.275% NaHCO3, WFI and 0.4% phenol as preservative. Following extraction, a calculated amount of glycerin is added to make a 50%(v/v) glycerinated solution. Standardized Grass Pollen extracts have potency designations of 10,000 BAU/mL and 100,000 BAU/mL except Bermuda Grass (10,000 BAU/mL only). Extracts with a potency of 10,000 BAU/mL are diluted from the 100,000 BAU/mL lots with Glycerol Saline 50%(v/v). The Glycerol Saline 50%(v/v) solution consists of Glycerin and Salts and Buffered Diluent whose ingredients are 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI and 0.4% phenol as a preservative. All extracts are aseptically filled in sterile containers. Standardized pollen extracts are intended for administration by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injection. Standardized grass pollen extracts labeled in BAU/mL are not interchangeable with grass pollen extracts labeled in AU/mL or with non-standardized grass pollen extracts. The Bioequivalent Allergy Unit (BAU), the potency unit used for all Standardized Pollen Extracts, replaces the previous unitage for these products. Bioequivalent Allergy Units were assigned to the FDA, Center for Biologics Evaluation and Research (CBER) reference extracts, based on quantitative intradermal skin test results. BAU's are intended to assure that the labeled unitage of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted one half million fold to produce an intradermal sum of erythema diameter response of 50mm in highly puncture reactive subjects. 100,000 BAU/mL can be diluted 1:5 million fold to yield the same intradermal response.(2) The assignment of BAU/mL to standardized grass pollen extracts, is accomplished by an ELISA assay comparing the extract to the CBER reference. Previously, the potency / concentration of grass mixtures was designated based on the manufacturing strength, e.g. 1:10 w/v or 1:20 w/v, or in PNU's/mL. For grass mixtures containing standardized extracts, the potency will reflect the contribution of each individual component in the mixture, i.e., the actual potency of each component will be listed on a per mL basis. In addition, because the individual components may be cross-reactive, an additional caution statement, "due to cross reactivity, total potency may be 100,000 BAU/mL," will be added to the label.</Description>
</NDC>
<NDC>
<NDCCode>72162-1000-2</NDCCode>
<PackageDescription>120 CAPSULE in 1 BOTTLE (72162-1000-2) </PackageDescription>
<NDC11Code>72162-1000-02</NDC11Code>
<ProductNDC>72162-1000</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Icosapent Ethyl</ProprietaryName>
<NonProprietaryName>Icosapent Ethyl</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201104</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209457</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ICOSAPENT ETHYL</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Icosapent ethyl is indicated: 1 as an adjunct to diet to reduce triglyceride (TG) levels in adult patients with severe (≥500 mg/dL) hypertriglyceridemia. .</IndicationAndUsage>
<Description>Icosapent ethyl, a lipid-regulating agent, is supplied as a 0.5 gram and 1 gram, liquid-filled soft gelatin capsule for oral administration. Each icosapent ethyl capsule contains either 0.5 grams of icosapent ethyl or 1 gram of icosapent ethyl. Icosapent ethyl is an ethyl ester of the omega-3 fatty acid eicosapentaenoic acid (EPA). The empirical formula of icosapent ethyl is C22H34O2 and the molecular weight is 330.5. The chemical name for icosapent ethyl is ethyl all-cis-5,8,11,14,17-icosapentaenoate with the following chemical structure. Each capsule contains the following inactive ingredients: gelatin, glycerin, purified water, sorbitol, sorbitan and tocopherol. The monogramming ink ingredients contain: ammonium hydroxide, iron oxide black, isopropyl alcohol, macrogol, polyvinyl acetate phthalate, propylene glycol, purified water and SDA alcohol (ethanol and ethyl acetate).</Description>
</NDC>
<NDC>
<NDCCode>72162-1048-2</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (72162-1048-2) / 45 g in 1 TUBE</PackageDescription>
<NDC11Code>72162-1048-02</NDC11Code>
<ProductNDC>72162-1048</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Adapalene</ProprietaryName>
<NonProprietaryName>Adapalene</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20100630</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090824</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ADAPALENE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240223</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Adapalene cream is indicated for the topical treatment of acne vulgaris.</IndicationAndUsage>
<Description>Adapalene cream, 0.1%, contains adapalene 0.1% in an aqueous cream emulsion consisting of carbomer 934P, cyclomethicone, edetate disodium, glycerin, methyl glucose sesquistearate, methylparaben, PEG-20 methyl glucose sesquistearate, phenoxyethanol, propylparaben, purified water, squalane, and trolamine. The chemical name of adapalene is 6-[3-(1-adamantyl)-4-methoxyphenyl]-2-naphthoic acid. It is a white to off-white powder which is soluble in tetrahydrofuran, sparingly soluble in ethanol, and practically insoluble in water. The molecular formula is C28H28O3 and molecular weight is 412.52. Adapalene is represented by the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>72162-1059-2</NDCCode>
<PackageDescription>45 TABLET, EXTENDED RELEASE in 1 BOTTLE (72162-1059-2) </PackageDescription>
<NDC11Code>72162-1059-02</NDC11Code>
<ProductNDC>72162-1059</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alprazolam</ProprietaryName>
<ProprietaryNameSuffix>Extended Release</ProprietaryNameSuffix>
<NonProprietaryName>Alprazolam</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070312</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078056</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ALPRAZOLAM</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2023-05-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230508</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Alprazolam extended-release tablets, USP contain alprazolam, USP which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-α] [1,4] benzodiazepine. The molecular formula is C17H13ClN4 which corresponds to a molecular weight of 308.76. The structural formula is represented below. Alprazolam, USP is a white crystalline powder, which is soluble in methanol or ethanol but which has no appreciable solubility in water at physiological pH. Each alprazolam extended-release tablet USP, for oral administration, contains 0.5 mg, 1 mg, 2 mg, or 3 mg of alprazolam, USP. The inactive ingredients are lactose monohydrate, hypromellose, and magnesium stearate. In addition, the 1 mg tablets also contain D&C yellow #10 aluminum lake. The 2 mg tablets also contain FD&C Yellow #6 aluminum lake, and the 3 mg tablets also contain D&C Yellow #10 aluminum lake, and FD&C Blue #2 aluminum lake. Product meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>72162-1071-2</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (72162-1071-2) / 45 g in 1 TUBE</PackageDescription>
<NDC11Code>72162-1071-02</NDC11Code>
<ProductNDC>72162-1071</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tretinoin</ProprietaryName>
<NonProprietaryName>Tretinoin</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20190812</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA017955</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>TRETINOIN</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tretinoin is indicated for topical application in the treatment of acne vulgaris. The safety and efficacy of the long-term use of this product in the treatment of other disorders have not been established.</IndicationAndUsage>
<Description>Tretinoin Cream and Tretinoin Gel are used for the topical treatment of acne vulgaris. Tretinoin Gel contains tretinoin (retinoic acid, vitamin A acid) in either of two strengths, 0.025% or 0.01% by weight, in a gel vehicle of butylated hydroxytoluene, hydroxypropyl cellulose and alcohol (denatured with tert-butyl alcohol and brucine sulfate) 90% w/w. Tretinoin Cream contains tretinoin in one of three strengths, 0.1%, 0.05%, or 0.025% by weight, in a hydrophilic cream vehicle of stearic acid, isopropyl myristate, polyoxyl 40 stearate, stearyl alcohol, xanthan gum, sorbic acid, butylated hydroxytoluene, and purified water. Chemically, tretinoin is all-trans-retinoic acid and has the following structure:.</Description>
</NDC>
<NDC>
<NDCCode>72162-1072-2</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (72162-1072-2) / 45 g in 1 TUBE</PackageDescription>
<NDC11Code>72162-1072-02</NDC11Code>
<ProductNDC>72162-1072</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tretinoin</ProprietaryName>
<NonProprietaryName>Tretinoin</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20190712</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA017579</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>TRETINOIN</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tretinoin is indicated for topical application in the treatment of acne vulgaris. The safety and efficacy of the long-term use of this product in the treatment of other disorders have not been established.</IndicationAndUsage>
<Description>Tretinoin Cream and Tretinoin Gel are used for the topical treatment of acne vulgaris. Tretinoin Gel contains tretinoin (retinoic acid, vitamin A acid) in either of two strengths, 0.025% or 0.01% by weight, in a gel vehicle of butylated hydroxytoluene, hydroxypropyl cellulose and alcohol (denatured with tert-butyl alcohol and brucine sulfate) 90% w/w. Tretinoin Cream contains tretinoin in one of three strengths, 0.1%, 0.05%, or 0.025% by weight, in a hydrophilic cream vehicle of stearic acid, isopropyl myristate, polyoxyl 40 stearate, stearyl alcohol, xanthan gum, sorbic acid, butylated hydroxytoluene, and purified water. Chemically, tretinoin is all-trans-retinoic acid and has the following structure:.</Description>
</NDC>
<NDC>
<NDCCode>72162-1076-2</NDCCode>
<PackageDescription>90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (72162-1076-2) </PackageDescription>
<NDC11Code>72162-1076-02</NDC11Code>
<ProductNDC>72162-1076</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride</ProprietaryName>
<NonProprietaryName>Potassium Chloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208864</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240405</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium chloride extended-release capsules are indicated for the treatment and prophylaxis of hypokalemia in adults and children with or without metabolic alkalosis, in patients for whom dietary management with potassium-rich foods or diuretic dose reduction is insufficient.</IndicationAndUsage>
<Description>Potassium chloride extended-release capsules, USP, are an oral dosage form of microencapsulated potassium chloride containing 600 mg and 750 mg of potassium chloride, USP, equivalent to 8 mEq and 10 mEq of potassium, respectively. The chemical name of the active ingredient is potassium chloride and the structural formula is KCl. It has a molecular mass of 74.55. Potassium chloride, USP, occurs as a white granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Inactive ingredients: ethylcellulose, gelatin, magnesium stearate, sodium lauryl sulfate, titanium dioxide and edible black ink. The 10 mEq capsules also contain black iron oxide, FD&C blue No.1 and FD&C red No.3.</Description>
</NDC>
<NDC>
<NDCCode>72162-1085-2</NDCCode>
<PackageDescription>30 mL in 1 BOTTLE, PLASTIC (72162-1085-2) </PackageDescription>
<NDC11Code>72162-1085-02</NDC11Code>
<ProductNDC>72162-1085</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methadone Hydrocloride</ProprietaryName>
<ProprietaryNameSuffix>Dye-free, Sugar-free, Unflavored</ProprietaryNameSuffix>
<NonProprietaryName>Methadone Hydrochloride</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212093</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>METHADONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231005</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methadone Hydrochloride contains methadone, an opioid agonist indicated for the: 1 detoxification treatment of opioid addiction (heroin or other morphine-like drugs)., 2 maintenance treatment of opioid addiction (heroin or other morphine-like drugs), in conjunction with appropriate social and medical services.</IndicationAndUsage>
<Description>Methadone Hydrochloride Oral Concentrate, USP dye-free, sugar-free, unflavored contains methadone, an opioid agonist, and is available as a dye-free, sugar-free, unflavored liquid concentrate of methadone hydrochloride for oral administration. Methadone hydrochloride is chemically described as 6-(dimethylamino)-4,4-diphenyl-3-heptone hydrochloride. Methadone hydrochloride, USP is a fine white powder. It is very soluble in water, soluble in isopropanol and in chloroform, and practically insoluble in ether and in glycerine. It is present in Methadone Hydrochloride as the racemic mixture. Methadone hydrochloride has a melting point of 235°C, a pKa of 8.25 in water at 20°C, a solution (1 part per 100) pH between 4.5 and 6.5, a partition coefficient of 117 at pH 7.4 in octanol/water and a molecular weight of 345.91. Its structural formula is C21H27NOHCl. This liquid concentrate contains 10 mg of methadone hydrochloride (equivalent to 8.95 mg of methadone) per mL and the following inactive ingredients: citric acid anhydrous, purified water, sodium benzoate.</Description>
</NDC>
<NDC>
<NDCCode>72162-1098-2</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (72162-1098-2) / 50 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>72162-1098-02</NDC11Code>
<ProductNDC>72162-1098</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070227</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040710</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230926</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine Hydrochloride Topical Solution USP, 4% is indicated for the production of topical anesthesia of accessible mucous membranes of the oral and nasal cavities and proximal portions of the digestive tract.</IndicationAndUsage>
<Description>Lidocaine Hydrochloride Topical Solution USP, 4% contains a local anesthetic agent and is administered topically. See INDICATIONS for specific uses. Lidocaine Hydrochloride Topical Solution USP, 4% contains lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the following structural formula. The 50 mL screw-cap bottle should not be autoclaved, because the closure employed cannot withstand autoclaving temperatures and pressures. Composition of Lidocaine Hydrochloride Topical Solution USP, 4%: Each mL contains lidocaine HCl, 40 mg, methylparaben, and sodium hydroxide and/or hydrochloric acid to adjust pH to 5.0 to 7.0. An aqueous solution. NOT FOR INJECTION.</Description>
</NDC>
<NDC>
<NDCCode>72162-1108-2</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (72162-1108-2) </PackageDescription>
<NDC11Code>72162-1108-02</NDC11Code>
<ProductNDC>72162-1108</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Trospium Chloride</ProprietaryName>
<NonProprietaryName>Trospium Chloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101117</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091573</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>TROSPIUM CHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231009</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Trospium Chloride Tablets are a muscarinic antagonist indicated for the treatment of overactive bladder (OAB) with symptoms of urge urinary incontinence, urgency, and urinary frequency.</IndicationAndUsage>
<Description>Trospium chloride is a quaternary ammonium compound with the chemical name of Spiro[8-azoniabicyclo[3.2.1]octane-8,1'-pyrrolidinium], 3-[(hydroxydiphenylacetyl)oxy]-, chloride, (1α, 3β, 5α). The empirical formula of trospium chloride is C25H30ClNO3 and its molecular weight is 427.97. The structural formula of trospium chloride is represented below. Trospium chloride is a fine, colorless to slightly yellow, crystalline solid. The compound's solubility in water is approximately 1 g per 2 mL. Each Trospium Chloride Tablet contains 20 mg of trospium chloride, a muscarinic antagonist, for oral administration. Each tablet also contains the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, calcium carbonate, croscarmellose sodium, povidone, hypromellose, talc, stearic acid, titanium dioxide, colloidal silicon dioxide, magnesium stearate and polyethylene glycol 3350.</Description>
</NDC>
<NDC>
<NDCCode>72162-1109-2</NDCCode>
<PackageDescription>1 BOTTLE, GLASS in 1 CARTON (72162-1109-2) / 118 mL in 1 BOTTLE, GLASS</PackageDescription>
<NDC11Code>72162-1109-02</NDC11Code>
<ProductNDC>72162-1109</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Midazolam Hydrochloride</ProprietaryName>
<NonProprietaryName>Midazolam Hydrochloride</NonProprietaryName>
<DosageFormName>SYRUP</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050502</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076379</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2023-10-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231025</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Midazolam HCl syrup is indicated for use in pediatric patients for sedation, anxiolysis and amnesia prior to diagnostic, therapeutic or endoscopic procedures or before induction of anesthesia. Midazolam HCl syrup is intended for use in monitored settings only and not for chronic or home use [see WARNINGS].</IndicationAndUsage>
<Description>Midazolam is a benzodiazepine available as midazolam HCl syrup for oral administration. Midazolam, a white to light yellow crystalline compound, is insoluble in water, but can be solubilized in aqueous solutions by formation of the hydrochloride salt in situ under acidic conditions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the molecular formula C18H13ClFN3·HCl, a calculated molecular weight of 362.25 and the following structural formula. Each mL of the syrup contains midazolam hydrochloride equivalent to 2 mg midazolam compounded with artificial bitterness modifier, citric acid anhydrous, D&C Red #33, edetate disodium, glycerin, mixed fruit flavor, sodium benzoate, sodium citrate, sorbitol, and water; the pH is adjusted to 2.8 to 3.6 with hydrochloric acid. Under the acidic conditions required to solubilize midazolam in the syrup, midazolam is present as an equilibrium mixture (shown below) of the closed ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the syrup, the solution may contain up to about 40% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart below plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 2.8 to 3.6. Above pH 5, at least 99% of the mixture is present in the closed-ring form.</Description>
</NDC>
<NDC>
<NDCCode>72162-1117-2</NDCCode>
<PackageDescription>1 BOTTLE, WITH APPLICATOR in 1 CARTON (72162-1117-2) / 15 mL in 1 BOTTLE, WITH APPLICATOR</PackageDescription>
<NDC11Code>72162-1117-02</NDC11Code>
<ProductNDC>72162-1117</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Podocon 25</ProprietaryName>
<NonProprietaryName>Podophyllum Resin</NonProprietaryName>
<DosageFormName>TINCTURE</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19900901</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>PODOPHYLLUM RESIN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/4mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Podocon-25® (25% podophyllin in benzoin tincture) is indicated for the removal of soft genital (venereal) warts (condylomata acuminata)(4).</IndicationAndUsage>
<Description>Podocon-25® is composed of Podophyllin (Podophyllum Resin, American) 25% in Benzoin Tincture. Podophyllum Resin is the powdered mixture of resins removed from the May apple or Mandrake (Podophyllum peltatum Linne’), a perennial plant of northern and middle United States(1). The podophyllin resin used in this product is exclusively the American podophyllin (rather than the Indian resin). American podophyllin typically has a reduced level of podophyllotoxin (see below).</Description>
</NDC>
<NDC>
<NDCCode>72162-1119-2</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (72162-1119-2) / 1 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>72162-1119-02</NDC11Code>
<ProductNDC>72162-1119</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Testosterone Cypionate</ProprietaryName>
<NonProprietaryName>Testosterone Cypionate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20140501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091244</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>TESTOSTERONE CYPIONATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Androgen Receptor Agonists [MoA], Androgen [EPC], Androstanes [CS]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-07-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Testosterone Cypionate Injection, USP is indicated for replacement therapy in the male in conditions associated with symptoms of deficiency, or absence of endogenous testosterone. : 1 1.Primary hypogonadism (congenital or acquired): testicular failure due to cryptorchidism, bilateral torsion, orchitis, vanishing testis syndrome; or orchidectomy., 2 2.Hypogonadotropic hypogonadism (congenital or acquired): gonadotropin or luteinizing hormone-releasing hormone (LHRH) deficiency, or pituitary-hypothalamic injury from tumors, trauma, or radiation.</IndicationAndUsage>
<Description>Testosterone Cypionate Injection, USP for intramuscular injection, contains Testosterone Cypionate, USP which is the oil-soluble 17 (beta)-cyclopentylpropionate ester of the androgenic hormone testosterone. Testosterone Cypionate, USP is a white or creamy white crystalline powder, odorless or nearly so and stable in air. It is insoluble in water, freely soluble in alcohol, chloroform, dioxane, ether, and soluble in vegetable oils. The chemical name for Testosterone Cypionate, USP is androst-4-en-3-one,17-(3-cyclopentyl-1- oxopropoxy)-, (17ß)-. Its molecular formula is C27H40O3, and the molecular weight 412.61. The structural formula is represented below. Testosterone Cypionate Injection, USP is available in one strength, 200 mg/mL Testosterone Cypionate, USP. Each mL of the 200 mg/mL solution contains: 1 Testosterone Cypionate, USP 200 mg, 2 Benzyl Benzoate, USP 0.2 mL, 3 Cottonseed Oil, USP 560 mg, 4 Benzyl Alcohol, USP (as preservative) 9.45 mg.</Description>
</NDC>
<NDC>
<NDCCode>72162-1123-2</NDCCode>
<PackageDescription>118 mL in 1 BOTTLE, PLASTIC (72162-1123-2) </PackageDescription>
<NDC11Code>72162-1123-02</NDC11Code>
<ProductNDC>72162-1123</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Brompheniramine Maleate, Pseudoephedrine Hydrochloride And Dextromethorphan Hydrobromide</ProprietaryName>
<NonProprietaryName>Brompheniramine Maleate, Pseudoephedrine Hydrochloride And Dextromethorphan Hydrobromide</NonProprietaryName>
<DosageFormName>SYRUP</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205292</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>BROMPHENIRAMINE MALEATE; PSEUDOEPHEDRINE HYDROCHLORIDE; DEXTROMETHORPHAN HYDROBROMIDE</SubstanceName>
<StrengthNumber>2; 30; 10</StrengthNumber>
<StrengthUnit>mg/5mL; mg/5mL; mg/5mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230816</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For relief of coughs and upper respiratory symptoms, including nasal congestion, associated with allergy or the common cold.</IndicationAndUsage>
<Description>Brompheniramine Maleate, Pseudoephedrine Hydrochloride and Dextromethorphan Hydrobromide Syrup is a clear, light pink syrup with a butterscotch flavor. Each 5 mL (1 teaspoonful) contains. Brompheniramine Maleate, USP ................. 2 mg. Pseudoephedrine Hydrochloride, USP ........ 30 mg. Dextromethorphan Hydrobromide, USP ...... 10 mg. Alcohol 0.95% v/v. In a palatable, aromatic vehicle. Inactive Ingredients: alcohol, artificial butterscotch flavor, citric acid anhydrous, glycerin, methylparaben, propylene glycol, purified water, sodium benzoate, sodium citrate, sucrose, and FD&C Red No. 40. It may contain 10% citric acid solution or 10% sodium citrate solution for pH adjustment. The pH range is between 3.0 and 6.0. Antihistamine/Nasal Decongestant/Antitussive syrup for oral administration.</Description>
</NDC>
<NDC>
<NDCCode>72162-1124-2</NDCCode>
<PackageDescription>15 g in 1 BOTTLE, PLASTIC (72162-1124-2) </PackageDescription>
<NDC11Code>72162-1124-02</NDC11Code>
<ProductNDC>72162-1124</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nystop</ProprietaryName>
<NonProprietaryName>Nystatin</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19960816</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA064118</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>NYSTATIN</SubstanceName>
<StrengthNumber>100000</StrengthNumber>
<StrengthUnit>[USP'U]/g</StrengthUnit>
<Pharm_Classes>Polyene Antifungal [EPC], Polyenes [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nystatin Topical Powder is indicated in the treatment of cutaneous or mucocutaneous mycotic infections caused by Candida albicans and other susceptible Candida species. This preparation is not indicated for systemic, oral, intravaginal or ophthalmic use.</IndicationAndUsage>
<Description>Nystatin is a polyene antifungal antibiotic obtained from Streptomyces nursei. The molecular formula for Nystatin is C47H75NO17. The molecular weight of Nystatin is 926.1. Structural formula. Nystatin Topical Powder USP is for dermatologic use. Nystatin Topical Powder USP contains 100,000 USP nystatin units per gram dispersed in talc.</Description>
</NDC>
<NDC>
<NDCCode>72162-1126-2</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (72162-1126-2) / 45 g in 1 TUBE</PackageDescription>
<NDC11Code>72162-1126-02</NDC11Code>
<ProductNDC>72162-1126</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ciclopirox</ProprietaryName>
<NonProprietaryName>Ciclopirox</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20090107</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078266</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>CICLOPIROX</SubstanceName>
<StrengthNumber>7.7</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Decreased DNA Replication [PE], Decreased Protein Synthesis [PE], Decreased RNA Replication [PE], Protein Synthesis Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240311</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Superficial Dermatophyte Infections. Ciclopirox Gel, 0.77% is indicated for the topical treatment of interdigital tinea pedis and tinea corporis due to Trichophyton rubrum, Trichophyton mentagrophytes, or Epidermophyton floccosum. Seborrheic Dermatitis. Ciclopirox Gel, 0.77% is indicated for the topical treatment of seborrheic dermatitis of the scalp.</IndicationAndUsage>
<Description>Ciclopirox Gel, 0.77% contains a synthetic antifungal agent, ciclopirox. It is intended for topical dermatologic use only. Each gram of Ciclopirox Gel, 0.77% contains 7.70 mg of ciclopirox in a gel consisting of Purified Water USP, Isopropyl Alcohol USP, Octyldodecanol NF, Dimethicone Copolyol 190, Carbomer 980, Sodium Hydroxide NF, and Docusate Sodium USP. Ciclopirox Gel, 0.77% is a white, slightly fluid gel. The chemical name for ciclopirox is 6-cyclohexyl-1-hydroxy-4-methyl-2(1H)- pyridinone, with the empirical formula C12H17NO2 and a molecular weight of 207.27. The CAS Registry Number is [29342-05-0]. The chemical structure is.</Description>
</NDC>
<NDC>
<NDCCode>72162-1128-2</NDCCode>
<PackageDescription>10 mL in 1 BOTTLE, PLASTIC (72162-1128-2) </PackageDescription>
<NDC11Code>72162-1128-02</NDC11Code>
<ProductNDC>72162-1128</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tobramycin And Dexamethasone</ProprietaryName>
<NonProprietaryName>Tobramycin And Dexamethasone</NonProprietaryName>
<DosageFormName>SUSPENSION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20220317</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212715</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>TOBRAMYCIN; DEXAMETHASONE</SubstanceName>
<StrengthNumber>3; 1</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>INDICATIONS AND USAGE: Tobramycin and dexamethasone ophthalmic suspension is indicated for steroid-responsive inflammatory ocular conditions for which a corticosteroid is indicated and where superficial bacterial ocular infection or a risk of bacterial ocular infection exists. Ocular steroids are indicated in inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe where the inherent risk of steroid use in certain infective conjunctivitides is accepted to obtain a diminution in edema and inflammation. They are also indicated in chronic anterior uveitis and corneal injury from chemical, radiation or thermal burns, or penetration of foreign bodies. The use of a combination drug with an anti-infective component is indicated where the risk of superficial ocular infection is high or where there is an expectation that potentially dangerous numbers of bacteria will be present in the eye. The particular anti-infective drug in this product is active against the following common bacterial eye pathogens. Staphylococci, including S. aureus and S. epidermidis (coagulase-positive and coagulase-negative), including penicillin-resistant strains. Streptococci, including some of the Group A-beta-hemolytic species, some nonhemolytic species, and some Streptococcus pneumoniae. Pseudomonas aeruginosa, Escherichia coli, Klebsiella pneumoniae, Enterobacter aerogenes, Proteus mirabilis, Morganella morganii, most Proteus vulgaris strains, Haemophilus influenzae and H. aegyptius, Moraxella lacunata, Acinetobacter calcoaceticus and some Neisseria species.</IndicationAndUsage>
<Description>DESCRIPTION: Tobramycin and dexamethasone ophthalmic suspension USP is a sterile, multiple dose antibiotic and steroid combination for topical ophthalmic use with a pH of approximately 5.5 and an osmolality of approximately 300 mOsm/kg. The chemical structures for tobramycin and dexamethasone are presented below. Tobramycin. Empirical Formula: C18H37N5O9. Chemical Name: O-3-Amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine. MW: 467.52. Dexamethasone. Empirical Formula: C22H29FO5. Chemical Name: 9-Fluoro-11β,17,21-trihydroxy-16α-methylpregna-1,4-diene-3,20-dione. MW: 392.47. Each mL of Tobramycin and dexamethasone ophthalmic suspension contains: Actives: tobramycin 0.3% (3 mg) and dexamethasone 0.1% (1 mg). Preservative: benzalkonium chloride 0.01%. Inactives: edetate disodium dihydrate, hydroxyethyl cellulose, sodium chloride, sodium sulfate anhydrous, sulfuric acid and/or sodium hydroxide (to adjust pH), tyloxapol, and water for injection.</Description>
</NDC>
<NDC>
<NDCCode>72162-1128-7</NDCCode>
<PackageDescription>2.5 mL in 1 BOTTLE, PLASTIC (72162-1128-7) </PackageDescription>
<NDC11Code>72162-1128-07</NDC11Code>
<ProductNDC>72162-1128</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tobramycin And Dexamethasone</ProprietaryName>
<NonProprietaryName>Tobramycin And Dexamethasone</NonProprietaryName>
<DosageFormName>SUSPENSION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20220317</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212715</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>TOBRAMYCIN; DEXAMETHASONE</SubstanceName>
<StrengthNumber>3; 1</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>INDICATIONS AND USAGE: Tobramycin and dexamethasone ophthalmic suspension is indicated for steroid-responsive inflammatory ocular conditions for which a corticosteroid is indicated and where superficial bacterial ocular infection or a risk of bacterial ocular infection exists. Ocular steroids are indicated in inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe where the inherent risk of steroid use in certain infective conjunctivitides is accepted to obtain a diminution in edema and inflammation. They are also indicated in chronic anterior uveitis and corneal injury from chemical, radiation or thermal burns, or penetration of foreign bodies. The use of a combination drug with an anti-infective component is indicated where the risk of superficial ocular infection is high or where there is an expectation that potentially dangerous numbers of bacteria will be present in the eye. The particular anti-infective drug in this product is active against the following common bacterial eye pathogens. Staphylococci, including S. aureus and S. epidermidis (coagulase-positive and coagulase-negative), including penicillin-resistant strains. Streptococci, including some of the Group A-beta-hemolytic species, some nonhemolytic species, and some Streptococcus pneumoniae. Pseudomonas aeruginosa, Escherichia coli, Klebsiella pneumoniae, Enterobacter aerogenes, Proteus mirabilis, Morganella morganii, most Proteus vulgaris strains, Haemophilus influenzae and H. aegyptius, Moraxella lacunata, Acinetobacter calcoaceticus and some Neisseria species.</IndicationAndUsage>
<Description>DESCRIPTION: Tobramycin and dexamethasone ophthalmic suspension USP is a sterile, multiple dose antibiotic and steroid combination for topical ophthalmic use with a pH of approximately 5.5 and an osmolality of approximately 300 mOsm/kg. The chemical structures for tobramycin and dexamethasone are presented below. Tobramycin. Empirical Formula: C18H37N5O9. Chemical Name: O-3-Amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine. MW: 467.52. Dexamethasone. Empirical Formula: C22H29FO5. Chemical Name: 9-Fluoro-11β,17,21-trihydroxy-16α-methylpregna-1,4-diene-3,20-dione. MW: 392.47. Each mL of Tobramycin and dexamethasone ophthalmic suspension contains: Actives: tobramycin 0.3% (3 mg) and dexamethasone 0.1% (1 mg). Preservative: benzalkonium chloride 0.01%. Inactives: edetate disodium dihydrate, hydroxyethyl cellulose, sodium chloride, sodium sulfate anhydrous, sulfuric acid and/or sodium hydroxide (to adjust pH), tyloxapol, and water for injection.</Description>
</NDC>
<NDC>
<NDCCode>72162-1161-2</NDCCode>
<PackageDescription>1 DOSE PACK in 1 CARTON (72162-1161-2) / 21 TABLET in 1 DOSE PACK</PackageDescription>
<NDC11Code>72162-1161-02</NDC11Code>
<ProductNDC>72162-1161</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methylprednisolone</ProprietaryName>
<NonProprietaryName>Methylprednisolone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19981222</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040183</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>METHYLPREDNISOLONE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-09-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230926</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methylprednisolone tablets are indicated in the following conditions. 1. Endocrine Disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance). Congenital adrenal hyperplasia. Nonsuppurative thyroiditis. Hypercalcemia associated with cancer. 2. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in. Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). Ankylosing spondylitis. Acute and subacute bursitis. Synovitis of osteoarthritis. Acute nonspecific tenosynovitis. Post-traumatic osteoarthritis. Psoriatic arthritis. Epicondylitis. Acute gouty arthritis. 3. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of. Systemic lupus erythematosus. Systemic dermatomyositis (polymyositis). Acute rheumatic carditis. 4. Dermatologic Diseases. Bullous dermatitis herpetiformis. Severe erythema multiforme. (Stevens-Johnson syndrome). Severe seborrheic dermatitis. Exfoliative dermatitis. Mycosis fungoides. Pemphigus. Severe psoriasis. 5. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment. Seasonal or perennial allergic rhinitis. Drug hypersensitivity reactions. Serum sickness. Contact dermatitis. Bronchial asthma. Atopic dermatitis. 6. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as. Allergic corneal marginal ulcers. Herpes zoster ophthalmicus. Anterior segment inflammation. Diffuse posterior uveitis and choroiditis. Sympathetic ophthalmia. Keratitis. Optic neuritis. Allergic conjunctivitis. Chorioretinitis. Iritis and iridocyclitis. 7. Respiratory Diseases. Symptomatic sarcoidosis. Berylliosis. Loeffler’s syndrome not manageable by other means. Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy. Aspiration pneumonitis. 8. Hematologic Disorders. Idiopathic thrombocytopenic purpura in adults. Secondary thrombocytopenia in adults. Acquired (autoimmune) hemolytic anemia. Erythroblastopenia (RBC anemia). Congenital (erythroid) hypoplastic anemia. 9. Neoplastic Diseases. For palliative management of. Leukemias and lymphomas in adults. Acute leukemia of childhood. 10. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 11. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in. Ulcerative colitis. Regional enteritis. 12. Nervous System. Acute exacerbations of multiple sclerosis. 13. Miscellaneous. Tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Trichinosis with neurologic or myocardial involvement.</IndicationAndUsage>
<Description>Methylprednisolone tablets, USP contain methylprednisolone, USP which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Methylprednisolone, USP occurs as a white to practically white, crystalline powder. It is sparingly soluble in alcohol, in dioxane, and in methanol, slightly soluble in acetone, and in chloroform, and very slightly soluble in ether. It is practically insoluble in water. The chemical name for methylprednisolone, USP is pregna-1,4-diene-3,20-dione, 11,17,21-trihydroxy-6-methyl-, (6α,11β)- and the molecular weight is 374.48. The structural formula is represented below. Each methylprednisolone tablet, USP for oral administration contains 4 mg of methylprednisolone, USP. Inactive ingredients: magnesium stearate, microcrystalline cellulose and sodium starch glycolate.</Description>
</NDC>
</NDCList>