RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>72572-309-25</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (72572-309-25)  / 5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>72572-0309-25</NDC11Code>
    <ProductNDC>72572-309</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sodium Phosphates</ProprietaryName>
    <NonProprietaryName>Sodium Phosphate, Monobasic, Monohydrate And Sodium Phosphate, Dibasic Anhydrous</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20250813</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA218314</ApplicationNumber>
    <LabelerName>Civica, Inc.</LabelerName>
    <SubstanceName>SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; SODIUM PHOSPHATE, DIBASIC, ANHYDROUS</SubstanceName>
    <StrengthNumber>276; 142</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2025-08-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250813</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sodium Phosphates Injection, USP, 3 mM P/mL is indicated as a source of phosphorus, for addition to large volume intravenous fluids, to prevent or correct hypophosphatemia in patients with restricted or no oral intake. It is also useful as an additive for preparing specific parenteral fluid formulas when the needs of the patient cannot be met by standard electrolyte or nutrient solutions. The concomitant amount of sodium (Na+ 4 mEq/mL) must be calculated into total electrolyte dose of such prepared solutions.</IndicationAndUsage>
    <Description>Sodium Phosphates Injection, USP, 3 mM P/mL (millimoles/mL), is a sterile, nonpyrogenic, concentrated solution containing a mixture of monobasic sodium phosphate and dibasic sodium phosphate in water for injection. The solution is administered after dilution by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each mL contains 276 mg of monobasic sodium phosphate, monohydrate and 142 mg of dibasic sodium phosphate, anhydrous (equivalent to 268 mg of dibasic sodium phosphate, heptahydrate). One mM of phosphorus weighs 31 mg, and the product provides 93 mg (approximately 3 mM) of phosphorus/mL plus 92 mg (4 mEq) of sodium/mL. Note: 1 mM P = 1 mM PO4. It contains no bacteriostat, antimicrobial agent or added buffer. The pH is 5.5 (5.0 to 6.0). The osmolar concentration is 7 mOsmol/mL (calc). The solution is intended as an alternative to potassium phosphate to provide phosphorus for addition to large volume infusion fluids for intravenous use. It is provided as a 5 mL, 15 mL and 50 mL partial fill single-dose vial; when lesser amounts are required, the unused portion should be discarded with the entire unit. Monobasic Sodium Phosphate, USP (monohydrate) is chemically designated NaH2PO4 H2O, white, odorless crystals or granules freely soluble in water. Dibasic Sodium Phosphate, USP (anhydrous) is chemically designated Na2HPO4, colorless or white granular salt freely soluble in water. The semi-rigid container is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-309-32</NDCCode>
    <PackageDescription>25 VIAL, GLASS in 1 BOX (31722-309-32)  / 2 mL in 1 VIAL, GLASS (31722-309-31) </PackageDescription>
    <NDC11Code>31722-0309-32</NDC11Code>
    <ProductNDC>31722-309</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Furosemide</ProprietaryName>
    <NonProprietaryName>Furosemide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20241213</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217557</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>FUROSEMIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-01-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241213</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Parenteral therapy should be reserved for patients unable to take oral medication or for patients in emergency clinical situations. Edema:Furosemide is indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired. Furosemide is indicated as adjunctive therapy in acute pulmonary edema. The intravenous administration of furosemide is indicated when a rapid onset of diuresis is desired, e.g., in acute pulmonary edema. If gastrointestinal absorption is impaired or oral medication is not practical for any reason, furosemide is indicated by the intravenous or intramuscular route. Parenteral use should be replaced with oral furosemide as soon as practical.</IndicationAndUsage>
    <Description>Furosemide is a diuretic which is an anthranilic acid derivative. Chemically, it is 5-(aminosulfonyl)-4-chloro-2-[(2-furanylmethyl)amino] Benzoic acid. Furosemide Injection, USP 10 mg/mL is a sterile, non-pyrogenic solution in vials for intravenous and intramuscular injection. Furosemide, USP is a white to slightly yellowish, odorless crystalline powder. It is practically insoluble in water, freely soluble in acetone, in dimethyl formamide and in solutions of alkali hydroxides. Soluble in methanol, sparingly soluble in alcohol, slightly soluble in ether, very slightly soluble in chloroform. The structural formula is as follows:. C 12H 11C1N 2O 5S                                 M.W. 330.74 Each mL contains: Furosemide 10 mg, Sodium Chloride for isotonicity, Sodium Hydroxide, Water for Injection q.s., and, if necessary, Hydrochloric Acid to adjust pH between 8.0 and 9.3.</Description>
  </NDC>
  <NDC>
    <NDCCode>47621-309-04</NDCCode>
    <PackageDescription>25 kg in 1 DRUM (47621-309-04) </PackageDescription>
    <NDC11Code>47621-0309-04</NDC11Code>
    <ProductNDC>47621-309</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Phenoxybenzamine Hydrochloride</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20190917</StartMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
    <LabelerName>Raks Pharma Pvt. Limited</LabelerName>
    <SubstanceName>PHENOXYBENZAMINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>kg/kg</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2014-02-04</LastUpdate>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>17-SEP-19</StartMarketingDatePackage>
  </NDC>
  <NDC>
    <NDCCode>51630-309-01</NDCCode>
    <PackageDescription>1 CONTAINER in 1 PACKAGE (51630-309-01)  / 25 g in 1 CONTAINER</PackageDescription>
    <NDC11Code>51630-0309-01</NDC11Code>
    <ProductNDC>51630-309</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <NonProprietaryName>No7 Already Luminating Day Cream</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <StartMarketingDate>20210901</StartMarketingDate>
    <MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
    <LabelerName>Schmid &amp; Son Packaging</LabelerName>
    <SubstanceName>AVOBENZONE; OCTISALATE; OCTOCRYLENE</SubstanceName>
    <StrengthNumber>.75; 1.25; 1.875</StrengthNumber>
    <StrengthUnit>g/25g; g/25g; g/25g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2014-02-04</LastUpdate>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>01-SEP-21</StartMarketingDatePackage>
  </NDC>
  <NDC>
    <NDCCode>59630-309-25</NDCCode>
    <PackageDescription>48 CASE in 1 CONTAINER (59630-309-25)  &gt; 228 VIAL, SINGLE-USE in 1 CASE &gt; 10 mL in 1 VIAL, SINGLE-USE</PackageDescription>
    <NDC11Code>59630-0309-25</NDC11Code>
    <ProductNDC>59630-309</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Doripenem</NonProprietaryName>
    <DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
    <StartMarketingDate>20101015</StartMarketingDate>
    <MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
    <LabelerName>Shionogi Inc.</LabelerName>
    <SubstanceName>DORIPENEM</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/10mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2014-02-04</LastUpdate>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>61703-309-25</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (61703-309-25)  / 2 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>61703-0309-25</NDC11Code>
    <ProductNDC>61703-309</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Vincristine Sulfate</ProprietaryName>
    <NonProprietaryName>Vincristine Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20131127</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA071484</ApplicationNumber>
    <LabelerName>Hospira, Inc.</LabelerName>
    <SubstanceName>VINCRISTINE SULFATE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Vinca Alkaloid [EPC], Vinca Alkaloids [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20131127</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Vincristine Sulfate Injection is indicated in acute leukemia. Vincristine Sulfate Injection has also been shown to be useful in combination with other oncolytic agents in Hodgkin's disease, non–Hodgkin's malignant lymphomas, rhabdomyosarcoma, neuroblastoma, and Wilms' tumor.</IndicationAndUsage>
    <Description>Vincristine Sulfate Injection, USP is the salt of an alkaloid obtained from a common flowering herb, the periwinkle plant (Vinca rosea Linn). Originally known as leurocristine, it has also been referred to as LCR and VCR. The molecular formula for Vincristine Sulfate, USP is C46H56N4O10∙H2SO4. It has a molecular weight of 923.04. The structural formula is as follows. Vincristine Sulfate, USP is a white to off–white powder. It is soluble in methanol, freely soluble in water, but only slightly soluble in 95% ethanol. In 98% ethanol, Vincristine Sulfate, USP has an ultraviolet spectrum with maxima at 221 nm (ϵ+47,100). Vincristine Sulfate Injection, USP is a sterile, preservative–free, single-dose only solution available for intravenous use in 1 mg/mL and 2 mg/2 mL (1 mg/mL) vials. Each mL contains 1 mg Vincristine Sulfate, USP, 100 mg mannitol and Water for Injection, USP. Q.S. Sulfuric acid or sodium hydroxide have been added for pH control. The pH of Vincristine Sulfate Injection, USP ranges from 4.0 to 5.0. At the time of manufacture, the air in the containers is replaced by nitrogen.</Description>
  </NDC>
  <NDC>
    <NDCCode>66403-309-25</NDCCode>
    <PackageDescription>1 JAR in 1 BOX (66403-309-25)  &gt; 18 g in 1 JAR</PackageDescription>
    <NDC11Code>66403-0309-25</NDC11Code>
    <ProductNDC>66403-309</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Tiger Balm White</ProprietaryName>
    <ProprietaryNameSuffix>Regular Strength</ProprietaryNameSuffix>
    <NonProprietaryName>Camphor (synthetic) And Menthol</NonProprietaryName>
    <DosageFormName>OINTMENT</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20020125</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part348</ApplicationNumber>
    <LabelerName>Tiger Balm (Malaysia) Sdn. Bhd.</LabelerName>
    <SubstanceName>CAMPHOR (SYNTHETIC); MENTHOL, UNSPECIFIED FORM</SubstanceName>
    <StrengthNumber>110; 80</StrengthNumber>
    <StrengthUnit>mg/g; mg/g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2024-10-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20020125</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>For temporary relief of minor aches and pains of muscles and joints associated with simple backache, arthritis, bruises, strains and sprains.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>66761-309-25</NDCCode>
    <PackageDescription>1 JAR in 1 BOX (66761-309-25)  / 18 g in 1 JAR</PackageDescription>
    <NDC11Code>66761-0309-25</NDC11Code>
    <ProductNDC>66761-309</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Tiger Balm White</ProprietaryName>
    <ProprietaryNameSuffix>Regular Strength</ProprietaryNameSuffix>
    <NonProprietaryName>Camphor (synthetic) And Menthol</NonProprietaryName>
    <DosageFormName>OINTMENT</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20070201</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M017</ApplicationNumber>
    <LabelerName>Haw Par Healthcare Ltd.</LabelerName>
    <SubstanceName>CAMPHOR (SYNTHETIC); MENTHOL, UNSPECIFIED FORM</SubstanceName>
    <StrengthNumber>110; 80</StrengthNumber>
    <StrengthUnit>mg/g; mg/g</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2025-12-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20070201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>For temporary relief of minor aches and pains of muscles and joints associated with simple backache, bruises, strains, sprains and arthritis.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>68196-309-25</NDCCode>
    <PackageDescription>110 BLISTER PACK in 1 CARTON (68196-309-25)  &gt; 1 GUM, CHEWING in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>68196-0309-25</NDC11Code>
    <ProductNDC>68196-309</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Members Mark Nicotine</ProprietaryName>
    <NonProprietaryName>Nicotine Polacrilex</NonProprietaryName>
    <DosageFormName>GUM, CHEWING</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170405</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206393</ApplicationNumber>
    <LabelerName>Sam's West Inc</LabelerName>
    <SubstanceName>NICOTINE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2020-09-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170405</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>68391-309-25</NDCCode>
    <PackageDescription>110 BLISTER PACK in 1 CARTON (68391-309-25)  &gt; 1 GUM, CHEWING in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>68391-0309-25</NDC11Code>
    <ProductNDC>68391-309</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Berkley And Jensen Nicotine</ProprietaryName>
    <NonProprietaryName>Nicotine Polacrilex</NonProprietaryName>
    <DosageFormName>GUM, CHEWING</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170228</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206393</ApplicationNumber>
    <LabelerName>BJWC</LabelerName>
    <SubstanceName>NICOTINE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2023-12-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170228</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>69842-309-25</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (69842-309-25)  / 74 g in 1 TUBE</PackageDescription>
    <NDC11Code>69842-0309-25</NDC11Code>
    <ProductNDC>69842-309</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Cvs Maximum Strength Burn</ProprietaryName>
    <NonProprietaryName>Lidocaine Hydrochloride 4%</NonProprietaryName>
    <DosageFormName>GEL</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20220101</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M017</ApplicationNumber>
    <LabelerName>CVS Pharmacy</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>g/100g</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Temporarily relieves pain and itching due to: minor burns, sunburn, minor cuts, scrapes, insect bites, minor skin irritations.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>73377-309-01</NDCCode>
    <PackageDescription>25 g in 1 JAR (73377-309-01) </PackageDescription>
    <NDC11Code>73377-0309-01</NDC11Code>
    <ProductNDC>73377-309</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Trametinib</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20250206</StartMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
    <LabelerName>AX Pharmaceutical Corp</LabelerName>
    <SubstanceName>TRAMETINIB</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/g</StrengthUnit>
    <Status>Unfinished</Status>
    <LastUpdate>2025-02-07</LastUpdate>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>06-FEB-25</StartMarketingDatePackage>
  </NDC>
  <NDC>
    <NDCCode>76237-309-39</NDCCode>
    <PackageDescription>25 BLISTER PACK in 1 BOX (76237-309-39)  &gt; 30 TABLET in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>76237-0309-39</NDC11Code>
    <ProductNDC>76237-309</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lisinopril 10mg</ProprietaryName>
    <NonProprietaryName>Lisinopril</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20130801</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075994</ApplicationNumber>
    <LabelerName>Mckesson Contract Packaging</LabelerName>
    <SubstanceName>LISINOPRIL</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-03-14</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>72572-015-25</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (72572-015-25)  &gt; 20 mL in 1 VIAL, MULTI-DOSE (72572-015-01) </PackageDescription>
    <NDC11Code>72572-0015-25</NDC11Code>
    <ProductNDC>72572-015</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Aminocaproic Acid</ProprietaryName>
    <NonProprietaryName>Aminocaproic Acid</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20201029</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA071192</ApplicationNumber>
    <LabelerName>Civica, Inc.</LabelerName>
    <SubstanceName>AMINOCAPROIC ACID</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Antifibrinolytic Agent [EPC], Decreased Fibrinolysis [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2020-10-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201029</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Aminocaproic Acid Injection is useful in enhancing hemostasis when fibrinolysis contributes to bleeding. In life-threatening situations, fresh whole blood transfusions, fibrinogen infusions, and other emergency measures may be required. Fibrinolytic bleeding may frequently be associated with surgical complications following heart surgery (with or without cardiac bypass procedures), and portacaval shunt; hematological disorders such as aplastic anemia; acute and life-threatening abruptio placentae; hepatic cirrhosis; and neoplastic disease such as carcinoma of the prostate, lung, stomach, and cervix. Urinary fibrinolysis, usually a normal physiological phenomenon, may frequently be associated with life-threatening complications following severe trauma, anoxia, and shock.  Symptomatic of such complications is surgical hematuria (following prostatectomy and nephrectomy) or nonsurgical hematuria (accompanying polycystic or neoplastic diseases of the genitourinary system).  (See WARNINGS.).</IndicationAndUsage>
    <Description>Aminocaproic Acid is 6-aminohexanoic acid, which acts as an inhibitor of fibrinolysis.  The structural formula is. NH2CH2(CH2)3CH2COOH. The molecular formula is:  C6H13NO2 Molecular Weight: 131.17. Aminocaproic Acid is soluble in water, acid and alkaline solutions; it is sparingly soluble in methanol and practically insoluble in chloroform. Aminocaproic Acid Injection, USP, for intravenous administration, is a sterile pyrogen-free solution containing 250 mg/mL of Aminocaproic Acid with Benzyl Alcohol 0.9%, as a preservative, and Water for Injection q.s.  The pH is adjusted to approximately 6.8 with Hydrochloric Acid and/or Sodium Hydroxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>72572-054-25</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (72572-054-25)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (72572-054-01) </PackageDescription>
    <NDC11Code>72572-0054-25</NDC11Code>
    <ProductNDC>72572-054</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cefazolin</ProprietaryName>
    <NonProprietaryName>Cefazolin</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20260818</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA216109</ApplicationNumber>
    <LabelerName>Civica, Inc.</LabelerName>
    <SubstanceName>CEFAZOLIN SODIUM</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>g/1</StrengthUnit>
    <Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260818</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cefazolin for Injection is a cephalosporin antibacterial indicated for: 1 Treatment of the following infections caused by susceptible isolates of the designated microorganisms in adult and pediatric patients 1 month of age and older for whom appropriate dosing with this formulation can be achieved:Respiratory tract infections (1.1)Urinary tract infections (1.2)Skin and skin structure infections (1.3)Biliary tract infections (1.4) Bone and joint infections (1.5)Genital infections (1.6)Septicemia (1.7)Endocarditis (1.8), 2 Perioperative prophylaxis in adult patients (1.9).</IndicationAndUsage>
    <Description>Cefazolin for Injection contains cefazolin sodium, a semi-synthetic cephalosporin. It is the sodium salt of 3-{[(5-methyl-1,3,4-thiadiazol-2-yl)thio]-methyl}-8-oxo-7-[2-(1H-tetrazol-1-yl) acetamido]-5-thia-1-azabicyclo [4.2.0]oct-2-ene-2-carboxylic acid. The molecular formula is C14H13N8NaO4S3 and molecular weight is 476.49. Structural Formula. Cefazolin for Injection is supplied as a sterile powder in single-dose vials. The 2 g/vial Cefazolin for Injection contains 2 grams of cefazolin (equivalent to 2.097 g of cefazolin sodium). The 2 g/vial Cefazolin for Injection contains 96 mg of sodium. After reconstitution with sterile water for injection, the drug product solution has a pH of 4.0 to 6.0. Cefazolin for Injection, 2 grams/vial, is intended for intravenous infusion or intravenous bolus injection. Cefazolin for Injection, 2 grams/vial is not for intramuscular administration [see Dosage and Administration (2.1, 2.2, 2.3)].</Description>
  </NDC>
  <NDC>
    <NDCCode>72572-055-25</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (72572-055-25)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (72572-055-01) </PackageDescription>
    <NDC11Code>72572-0055-25</NDC11Code>
    <ProductNDC>72572-055</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cefazolin</ProprietaryName>
    <NonProprietaryName>Cefazolin</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20220301</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065047</ApplicationNumber>
    <LabelerName>Civica, Inc.</LabelerName>
    <SubstanceName>CEFAZOLIN SODIUM</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/1</StrengthUnit>
    <Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-05-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220301</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cefazolin for Injection, USP is indicated in the treatment of the following serious infections due to susceptible organisms:. Respiratory Tract Infections: Due to S. pneumoniae, Klebsiella species, H. influenzae, S. aureus (penicillin-sensitive and penicillin-resistant), and group A beta-hemolytic streptococci. Injectable benzathine penicillin is considered to be the drug of choice in treatment and prevention of streptococcal infections, including the prophylaxis of rheumatic fever. Cefazolin for Injection is effective in the eradication of streptococci from the nasopharynx; however, data establishing the efficacy of Cefazolin for Injection in the subsequent prevention of rheumatic fever are not available at present. Urinary Tract Infections: Due to E. coli, P. mirabilis, Klebsiella species, and some strains of enterobacter and enterococci. Skin and Skin Structure Infections: Due to S. aureus (penicillin-sensitive and penicillin-resistant), group A beta-hemolytic streptococci, and other strains of streptococci. Biliary Tract Infections: Due to E. coli, various strains of streptococci, P. mirabilis, Klebsiella species, and S. aureus. Bone and Joint Infections: Due to S. aureus. Genital Infections: (i.e., prostatitis, epididymitis) due to E. coli, P. mirabilis, Klebsiella species, and some strains of enterococci. Septicemia: Due to S. pneumoniae, S. aureus (penicillin-sensitive and penicillin-resistant), P. mirabilis, E. coli and Klebsiella species. Endocarditis: Due to S. aureus (penicillin-sensitive and penicillin-resistant) and group A beta-hemolytic streptococci. Perioperative Prophylaxis: The prophylactic administration of Cefazolin for Injection preoperatively, intraoperatively and postoperatively may reduce the incidence of certain postoperative infections in patients undergoing surgical procedures which are classified as contaminated or potentially contaminated (e.g., vaginal hysterectomy, and cholecystectomy in high-risk patients such as those older than 70 years, with acute cholecystitis, obstructive jaundice, or common duct bile stones). The perioperative use of Cefazolin for Injection may also be effective in surgical patients in whom infection at the operative site would present a serious risk (e.g., during open-heart surgery and prosthetic arthroplasty). The prophylactic administration of Cefazolin for Injection should usually be discontinued within a 24 hour period after the surgical procedure. In surgery where the occurrence of infection may be particularly devastating (e.g., open-heart surgery and prosthetic arthroplasty), the prophylactic administration of Cefazolin for Injection may be continued for 3 to 5 days following the completion of surgery. If there are signs of infection, specimens for cultures should be obtained for the identification of the causative organism so that appropriate therapy may be instituted (see DOSAGE AND ADMINISTRATION). To reduce the development of drug-resistant bacteria and maintain the effectiveness of Cefazolin for Injection, USP and other antibacterial drugs, Cefazolin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Cefazolin for Injection, USP is a semi-synthetic cephalosporin for parenteral administration. It is the sodium salt of 3-{[(5-methyl-1,3,4-­thiadiazol-2-yl)thio]-methyl}-8-oxo-7-[2-(1H-tetrazol-1-yl) acetamido]-5-thia-1-azabicyclo [4.2.0]oct-2-ene-2-carboxylic acid. The molecular formula is C14H13N8NaO4S3 and molecular weight is 476.49. Structural Formula. Each vial contains 48 mg of sodium/1 gram of cefazolin sodium. Cefazolin for Injection, USP is white to off-white crystalline powder, supplied in vials equivalent to 1 gram of cefazolin.</Description>
  </NDC>
  <NDC>
    <NDCCode>72572-061-25</NDCCode>
    <PackageDescription>25 VIAL in 1 BOX (72572-061-25)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (72572-061-01) </PackageDescription>
    <NDC11Code>72572-0061-25</NDC11Code>
    <ProductNDC>72572-061</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ceftriaxone</ProprietaryName>
    <NonProprietaryName>Ceftriaxone</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20200301</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065342</ApplicationNumber>
    <LabelerName>Civica, Inc.</LabelerName>
    <SubstanceName>CEFTRIAXONE SODIUM</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/1</StrengthUnit>
    <Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-02-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200301</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Before instituting treatment with Ceftriaxone for Injection, USP, appropriate specimens should be obtained for isolation of the causative organism and for determination of its susceptibility to the drug. Therapy may be instituted prior to obtaining results of susceptibility testing. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ceftriaxone for Injection, USP and other antibacterial drugs, Ceftriaxone for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Ceftriaxone for Injection, USP is indicated for the treatment of the following infections when caused by susceptible organisms. LOWER RESPIRATORY TRACT INFECTIONS caused by Streptococcus pneumoniae, Staphylococcus aureus, Haemophilus influenzae, Haemophilus parainfluenzae, Klebsiella pneumoniae, Escherichia coli, Enterobacter aerogenes, Proteus mirabilis or Serratia marcescens. ACUTE BACTERIAL OTITIS MEDIA caused by Streptococcus pneumoniae, Haemophilus influenzae (including beta‑lactamase producing strains) or Moraxella catarrhalis (including beta-lactamase producing strains). NOTE: In one study lower clinical cure rates were observed with a single dose of Ceftriaxone for Injection, USP compared to 10 days of oral therapy. In a second study comparable cure rates were observed between single dose of Ceftriaxone for Injection, USP and the comparator. The potentially lower clinical cure rate of Ceftriaxone for Injection, USP should be balanced against the potential advantages of parenteral therapy (see CLINICAL STUDIES). SKIN AND SKIN STRUCTURE INFECTIONS caused by Staphylococcus aureus, Staphylococcus epidermidis, Streptococcus pyogenes, Viridans group streptococci, Escherichia coli, Enterobacter cloacae, Klebsiella oxytoca, Klebsiella pneumoniae, Proteus mirabilis, Morganella morganii1, Pseudomonas aeruginosa, Serratia marcescens, Acinetobacter calcoaceticus, Bacteroides fragilis1 or Peptostreptococcus species. URINARY TRACT INFECTIONS (complicated and uncomplicated) caused by Escherichia coli, Proteus mirabilis, Proteus vulgaris, Morganella morganii or Klebsiella pneumoniae. UNCOMPLICATED GONORRHEA (cervical/urethral and rectal) caused by Neisseria gonorrhoeae, including both penicillinase- and nonpenicillinase-producing strains, and pharyngeal gonorrhea caused by nonpenicillinase‑producing strains of Neisseria gonorrhoeae. PELVIC INFLAMMATORY DISEASE caused by Neisseria gonorrhoeae. Ceftriaxone for Injection, USP, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and Chlamydia trachomatis is one of the suspected pathogens, appropriate antichlamydial coverage should be added. BACTERIAL SEPTICEMIA caused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae or Klebsiella pneumoniae. BONE AND JOINT INFECTIONS caused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Proteus mirabilis, Klebsiella pneumoniae or Enterobacter species. INTRA-ABDOMINAL INFECTIONS caused by Escherichia coli, Klebsiella pneumoniae, Bacteroides fragilis, Clostridium species (Note: most strains of Clostridium difficile are resistant) or Peptostreptococcus species. MENINGITIS caused by Haemophilus influenzae, Neisseria meningitidis or Streptococcus pneumoniae. Ceftriaxone for Injection, USP has also been used successfully in a limited number of cases of meningitis and shunt infection caused by Staphylococcus epidermidis1 and Escherichia coli.1. 1Efficacy for this organism in this organ system was studied in fewer than ten infections.</IndicationAndUsage>
    <Description>Ceftriaxone for Injection, USP is a sterile, semisynthetic, broad-spectrum cephalosporin antibiotic for intravenous or intramuscular administration. Ceftriaxone sodium is (6R,7R)-7-[2-(2-Amino-4-thiazolyl)glyoxylamido]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo-as-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 72-(Z)-(O-methyloxime), disodium salt, sesquaterhydrate. The chemical formula of ceftriaxone sodium is C18H16N8Na2O7S33.5H2O. It has a calculated molecular weight of 661.59 and the following structural formula. Ceftriaxone for Injection, USP is a white to yellowish-orange crystalline powder which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The pH of a 1% aqueous solution is approximately 6.7. The color of Ceftriaxone for Injection, USP solutions ranges from light yellow to amber, depending on the length of storage, concentration and diluent used. Ceftriaxone for Injection, USP contains approximately 83 mg (3.6 mEq) of sodium per gram of ceftriaxone activity.</Description>
  </NDC>
  <NDC>
    <NDCCode>72572-062-25</NDCCode>
    <PackageDescription>25 VIAL in 1 BOX (72572-062-25)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (72572-062-01) </PackageDescription>
    <NDC11Code>72572-0062-25</NDC11Code>
    <ProductNDC>72572-062</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ceftriaxone</ProprietaryName>
    <NonProprietaryName>Ceftriaxone</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20200301</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065342</ApplicationNumber>
    <LabelerName>Civica, Inc.</LabelerName>
    <SubstanceName>CEFTRIAXONE SODIUM</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>g/1</StrengthUnit>
    <Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-02-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200301</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Before instituting treatment with Ceftriaxone for Injection, USP, appropriate specimens should be obtained for isolation of the causative organism and for determination of its susceptibility to the drug. Therapy may be instituted prior to obtaining results of susceptibility testing. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ceftriaxone for Injection, USP and other antibacterial drugs, Ceftriaxone for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Ceftriaxone for Injection, USP is indicated for the treatment of the following infections when caused by susceptible organisms. LOWER RESPIRATORY TRACT INFECTIONS caused by Streptococcus pneumoniae, Staphylococcus aureus, Haemophilus influenzae, Haemophilus parainfluenzae, Klebsiella pneumoniae, Escherichia coli, Enterobacter aerogenes, Proteus mirabilis or Serratia marcescens. ACUTE BACTERIAL OTITIS MEDIA caused by Streptococcus pneumoniae, Haemophilus influenzae (including beta‑lactamase producing strains) or Moraxella catarrhalis (including beta-lactamase producing strains). NOTE: In one study lower clinical cure rates were observed with a single dose of Ceftriaxone for Injection, USP compared to 10 days of oral therapy. In a second study comparable cure rates were observed between single dose of Ceftriaxone for Injection, USP and the comparator. The potentially lower clinical cure rate of Ceftriaxone for Injection, USP should be balanced against the potential advantages of parenteral therapy (see CLINICAL STUDIES). SKIN AND SKIN STRUCTURE INFECTIONS caused by Staphylococcus aureus, Staphylococcus epidermidis, Streptococcus pyogenes, Viridans group streptococci, Escherichia coli, Enterobacter cloacae, Klebsiella oxytoca, Klebsiella pneumoniae, Proteus mirabilis, Morganella morganii1, Pseudomonas aeruginosa, Serratia marcescens, Acinetobacter calcoaceticus, Bacteroides fragilis1 or Peptostreptococcus species. URINARY TRACT INFECTIONS (complicated and uncomplicated) caused by Escherichia coli, Proteus mirabilis, Proteus vulgaris, Morganella morganii or Klebsiella pneumoniae. UNCOMPLICATED GONORRHEA (cervical/urethral and rectal) caused by Neisseria gonorrhoeae, including both penicillinase- and nonpenicillinase-producing strains, and pharyngeal gonorrhea caused by nonpenicillinase‑producing strains of Neisseria gonorrhoeae. PELVIC INFLAMMATORY DISEASE caused by Neisseria gonorrhoeae. Ceftriaxone for Injection, USP, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and Chlamydia trachomatis is one of the suspected pathogens, appropriate antichlamydial coverage should be added. BACTERIAL SEPTICEMIA caused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae or Klebsiella pneumoniae. BONE AND JOINT INFECTIONS caused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Proteus mirabilis, Klebsiella pneumoniae or Enterobacter species. INTRA-ABDOMINAL INFECTIONS caused by Escherichia coli, Klebsiella pneumoniae, Bacteroides fragilis, Clostridium species (Note: most strains of Clostridium difficile are resistant) or Peptostreptococcus species. MENINGITIS caused by Haemophilus influenzae, Neisseria meningitidis or Streptococcus pneumoniae. Ceftriaxone for Injection, USP has also been used successfully in a limited number of cases of meningitis and shunt infection caused by Staphylococcus epidermidis1 and Escherichia coli.1. 1Efficacy for this organism in this organ system was studied in fewer than ten infections.</IndicationAndUsage>
    <Description>Ceftriaxone for Injection, USP is a sterile, semisynthetic, broad-spectrum cephalosporin antibiotic for intravenous or intramuscular administration. Ceftriaxone sodium is (6R,7R)-7-[2-(2-Amino-4-thiazolyl)glyoxylamido]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo-as-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 72-(Z)-(O-methyloxime), disodium salt, sesquaterhydrate. The chemical formula of ceftriaxone sodium is C18H16N8Na2O7S33.5H2O. It has a calculated molecular weight of 661.59 and the following structural formula. Ceftriaxone for Injection, USP is a white to yellowish-orange crystalline powder which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The pH of a 1% aqueous solution is approximately 6.7. The color of Ceftriaxone for Injection, USP solutions ranges from light yellow to amber, depending on the length of storage, concentration and diluent used. Ceftriaxone for Injection, USP contains approximately 83 mg (3.6 mEq) of sodium per gram of ceftriaxone activity.</Description>
  </NDC>
  <NDC>
    <NDCCode>72572-087-01</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (72572-087-01)  / 25 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>72572-0087-01</NDC11Code>
    <ProductNDC>72572-087</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cyclophosphamide</ProprietaryName>
    <NonProprietaryName>Cyclophosphamide</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS; ORAL</RouteName>
    <StartMarketingDate>20080521</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040745</ApplicationNumber>
    <LabelerName>Civica, Inc.</LabelerName>
    <SubstanceName>CYCLOPHOSPHAMIDE</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/25mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2026-07-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221214</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cyclophosphamide for Injection is an alkylating drug indicated for treatment of adults and pediatric patients with: 1 Malignant Diseases: malignant lymphomas: Hodgkin’s disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt’s lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma (1.1), 2 Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy (1.2)Limitations of Use:The safety and effectiveness for the treatment of nephrotic syndrome in adults or other renal disease has not been established. (1.2).</IndicationAndUsage>
    <Description>Cyclophosphamide is a synthetic antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide is a white crystalline powder with the molecular formula C7H15Cl2N2O2PH2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white powder available as 500 mg, 1 g, and 2 g strength single-dose vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide, 2 1 g vial contains 1069 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide, 3 2 g vial contains 2138 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide.</Description>
  </NDC>
  <NDC>
    <NDCCode>72572-097-25</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (72572-097-25)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (72572-097-01) </PackageDescription>
    <NDC11Code>72572-0097-25</NDC11Code>
    <ProductNDC>72572-097</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Methylprednisolone Sodium Succinate</ProprietaryName>
    <NonProprietaryName>Methylprednisolone Sodium Succinate</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20251201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203125</ApplicationNumber>
    <LabelerName>Civica, Inc.</LabelerName>
    <SubstanceName>METHYLPREDNISOLONE SODIUM SUCCINATE</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>When oral therapy is not feasible, and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, the intravenous or intramuscular use of Methylprednisolone Sodium Succinate for Injection is indicated as follows. Allergic states. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, serum sickness, transfusion reactions. Dermatologic diseases. Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases. To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic disorders. Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond-Blackfan anemia), idiopathic thrombocytopenic purpura in adults (intravenous administration only; intramuscular administration is contraindicated), pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous. Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic diseases. For the palliative management of leukemias and lymphomas. Nervous System. Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor, or craniotomy. Ophthalmic diseases. Sympathetic ophthalmia, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases. To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases. Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, temporal arteritis, polymyositis, and systemic lupus erythematosus.</IndicationAndUsage>
    <Description>Methylprednisolone Sodium Succinate for Injection, USP, Sterile Powder is an anti-inflammatory glucocorticoid, which contains Methylprednisolone Sodium Succinate, USP as the active ingredient. Methylprednisolone Sodium Succinate, USP, is the sodium succinate ester of methylprednisolone, and it occurs as a white, or nearly white, odorless hygroscopic, amorphous solid. It is very soluble in water and in alcohol; it is insoluble in chloroform and is very slightly soluble in acetone. The chemical name for Methylprednisolone Sodium Succinate, USP, is pregna-1,4-diene-3,20-dione,21-(3-carboxy-1-oxopropoxy)-11,17-dihydroxy-6-methyl-monosodium salt, (6α, 11β), and the molecular weight is 496.53. The structural formula is represented below. Methylprednisolone Sodium Succinate, USP is soluble in water; it may be administered in a small volume of diluent and is well suited for intravenous use in situations where high blood levels of methylprednisolone are required rapidly. Methylprednisolone Sodium Succinate, USP, is available in two strengths and packages for intravenous or intramuscular administration. 40 mg (Single-Dose Vial)—Each mL (when mixed) contains Methylprednisolone Sodium Succinate, USP equivalent to 40 mg methylprednisolone; also 1.6 mg monobasic sodium phosphate anhydrous; 17.46 mg dibasic sodium phosphate dried; and 25 mg lactose hydrous. 125 mg (Single-Dose Vial)—Each 2 mL (when mixed) contains Methylprednisolone Sodium Succinate, USP equivalent to 125 mg methylprednisolone; also 1.6 mg monobasic sodium phosphate anhydrous; and 17.4 mg dibasic sodium phosphate dried. IMPORTANT — Use only Water for Injection USP or Bacteriostatic Water for Injection USP with Benzyl Alcohol when reconstituting Methylprednisolone Sodium Succinate for Injection, USP.Use within 48 hours after mixing. When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8.</Description>
  </NDC>
  <NDC>
    <NDCCode>72572-098-25</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (72572-098-25)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (72572-098-01) </PackageDescription>
    <NDC11Code>72572-0098-25</NDC11Code>
    <ProductNDC>72572-098</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Methylprednisolone Sodium Succinate</ProprietaryName>
    <NonProprietaryName>Methylprednisolone Sodium Succinate</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20251201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203125</ApplicationNumber>
    <LabelerName>Civica, Inc.</LabelerName>
    <SubstanceName>METHYLPREDNISOLONE SODIUM SUCCINATE</SubstanceName>
    <StrengthNumber>125</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>When oral therapy is not feasible, and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, the intravenous or intramuscular use of Methylprednisolone Sodium Succinate for Injection is indicated as follows. Allergic states. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, serum sickness, transfusion reactions. Dermatologic diseases. Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases. To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic disorders. Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond-Blackfan anemia), idiopathic thrombocytopenic purpura in adults (intravenous administration only; intramuscular administration is contraindicated), pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous. Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic diseases. For the palliative management of leukemias and lymphomas. Nervous System. Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor, or craniotomy. Ophthalmic diseases. Sympathetic ophthalmia, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases. To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases. Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, temporal arteritis, polymyositis, and systemic lupus erythematosus.</IndicationAndUsage>
    <Description>Methylprednisolone Sodium Succinate for Injection, USP, Sterile Powder is an anti-inflammatory glucocorticoid, which contains Methylprednisolone Sodium Succinate, USP as the active ingredient. Methylprednisolone Sodium Succinate, USP, is the sodium succinate ester of methylprednisolone, and it occurs as a white, or nearly white, odorless hygroscopic, amorphous solid. It is very soluble in water and in alcohol; it is insoluble in chloroform and is very slightly soluble in acetone. The chemical name for Methylprednisolone Sodium Succinate, USP, is pregna-1,4-diene-3,20-dione,21-(3-carboxy-1-oxopropoxy)-11,17-dihydroxy-6-methyl-monosodium salt, (6α, 11β), and the molecular weight is 496.53. The structural formula is represented below. Methylprednisolone Sodium Succinate, USP is soluble in water; it may be administered in a small volume of diluent and is well suited for intravenous use in situations where high blood levels of methylprednisolone are required rapidly. Methylprednisolone Sodium Succinate, USP, is available in two strengths and packages for intravenous or intramuscular administration. 40 mg (Single-Dose Vial)—Each mL (when mixed) contains Methylprednisolone Sodium Succinate, USP equivalent to 40 mg methylprednisolone; also 1.6 mg monobasic sodium phosphate anhydrous; 17.46 mg dibasic sodium phosphate dried; and 25 mg lactose hydrous. 125 mg (Single-Dose Vial)—Each 2 mL (when mixed) contains Methylprednisolone Sodium Succinate, USP equivalent to 125 mg methylprednisolone; also 1.6 mg monobasic sodium phosphate anhydrous; and 17.4 mg dibasic sodium phosphate dried. IMPORTANT — Use only Water for Injection USP or Bacteriostatic Water for Injection USP with Benzyl Alcohol when reconstituting Methylprednisolone Sodium Succinate for Injection, USP.Use within 48 hours after mixing. When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8.</Description>
  </NDC>
  <NDC>
    <NDCCode>72572-120-25</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (72572-120-25)  / 1 mL in 1 VIAL (72572-120-01) </PackageDescription>
    <NDC11Code>72572-0120-25</NDC11Code>
    <ProductNDC>72572-120</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dexamethasone Sodium Phosphate</ProprietaryName>
    <NonProprietaryName>Dexamethasone Sodium Phosphate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRA-ARTICULAR; INTRALESIONAL; INTRAMUSCULAR; INTRAVENOUS; SOFT TISSUE</RouteName>
    <StartMarketingDate>20191113</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA084282</ApplicationNumber>
    <LabelerName>Civica, Inc.</LabelerName>
    <SubstanceName>DEXAMETHASONE SODIUM PHOSPHATE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-12-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191113</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>A. Intravenous or intramuscular administration. When oral therapy is not feasible and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, those products labeled for intravenous or intramuscular use are indicated as follows. 1. Endocrine disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance). Acute adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; mineralocorticoid supplementation may be necessary, particularly when synthetic analogs are used). Preoperatively, and in the event of serious trauma or illness, in patients with known adrenal insufficiency or when adrenocortical reserve is doubtful. Shock unresponsive to conventional therapy if adrenocortical insufficiency exists or is suspected. Congenital adrenal hyperplasia. Nonsuppurative thyroiditis. Hypercalcemia associated with cancer. 2. Rheumatic disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in:. Post-traumatic osteoarthritis. Synovitis of osteoarthritis. Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). Acute and subacute bursitis. Epicondylitis. Acute nonspecific tenosynovitis. Acute gouty arthritis. Psoriatic arthritis. Ankylosing spondylitis. 3. Collagen diseases. During an exacerbation or as maintenance therapy in selected cases of. Systemic lupus erythematosus. Acute rheumatic carditis. 4. Dermatologic diseases. Pemphigus. Severe erythema multiforme (Stevens-Johnson Syndrome). Exfoliative dermatitis. Bullous dermatitis herpetiformis. Severe seborrheic dermatitis. Severe psoriasis. Mycosis fungoides. 5. Allergic states. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in. Bronchial asthma. Contact dermatitis. Atopic dermatitis. Serum sickness. Seasonal or perennial allergic rhinitis. Drug hypersensitivity reactions. Urticarial transfusion reactions. Acute noninfectious laryngeal edema (epinephrine is the drug of first choice). 6. Ophthalmic diseases. Severe acute and chronic allergic and inflammatory processes involving the eye, such as. Herpes zoster ophthalmicus. Iritis, iridocyclitis. Chorioretinitis. Diffuse posterior uveitis and choroiditis. Optic neuritis. Sympathetic ophthalmia. Anterior segment inflammation. Allergic conjunctivitis. Allergic corneal marginal ulcers. Keratitis. 7. Gastrointestinal diseases. To tide the patient over a critical period of the disease in. Ulcerative colitis (systemic therapy). Regional enteritis (systemic therapy). 8. Respiratory diseases. Symptomatic Sarcoidosis. Berylliosis. Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate anti-tuberculosis chemotherapy. Loeffler's syndrome not manageable by other means. Aspiration pneumonitis. 9. Hematologic disorders. Acquired (autoimmune) hemolytic anemia. Idiopathic thrombocytopenic purpura in adults (I.V. only; I.M. administration is contraindicated). Secondary thrombocytopenia in adults. Erythroblastopenia (RBC anemia). Congenital (erythroid) hypoplastic anemia. 10. Neoplastic diseases. For palliative management of. Leukemias and lymphomas in adults. Acute leukemia of childhood. 11. Edematous states. To induce diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 12. Nervous system. Acute exacerbations of multiple sclerosis. 13. Miscellaneous. Tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate anti-tuberculosis chemotherapy. Trichinosis with neurologic or myocardial involvement. Diagnostic testing of adrenocortical hyperfunction. Cerebral edema of diverse etiologies in conjunction with adequate neurological evaluation and management. B. Intra-articular or soft tissue administration.When the strength and dosage form of the drug lend the preparation to the treatment of the condition, those products labeled for intra-articular or soft tissue administration are indicated as adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in. Synovitis of osteoarthritis. Rheumatoid arthritis. Acute and subacute bursitis. Acute gouty arthritis. Epicondylitis. Acute nonspecific tenosynovitis. Post-traumatic osteoarthritis. C. Intralesional administration.When the strength and dosage form of the drug lend the preparation to the treatment of the condition, those products labeled for intralesional administration are indicated for. Keloids. Localized hypertrophic, infiltrated, inflammatory lesions of: lichen planus, psoriatic plaques, granuloma annulare, and lichen simplex chronicus (neurodermatitis). Discoid lupus erythematosus. Necrobiosis lipoidica diabeticorum. Alopecia areata. They also may be useful in cystic tumors of an aponeurosis tendon (ganglia).</IndicationAndUsage>
    <Description>Dexamethasone sodium phosphate injection, USP is a water-soluble inorganic ester of dexamethasone which produces a rapid response even when injected intramuscularly. Dexamethasone sodium phosphate, a synthetic adrenocortical steroid, is a white or slightly yellow crystalline powder. It is freely soluble in water and is exceedingly hygroscopic. The molecular weight is 516.41. It is designated chemically as 9-fluoro-11β,17-dihydroxy-16α-methyl-21-(phosphonooxy)pregna-1,4-diene-3, 20-dione disodium salt. The molecular formula is: C22H28FNa2O8P and the structural formula is. Dexamethasone Sodium Phosphate Injection is a sterile solution of dexamethasone sodium phosphate for intravenous and intramuscular use. The 4 mg/mL strength may also be used for intra-articular, intralesional and soft tissue administration. Each mL of Dexamethasone Sodium Phosphate Injection 4 mg/mL contains dexamethasone sodium phosphate, equivalent to 4 mg dexamethasone phosphate or 3.33 mg dexamethasone. Inactive ingredients per mL: 1 mg sodium sulfite anhydrous, 19.4 mg sodium citrate anhydrous and 10.42 mg (0.01 mL) benzyl alcohol (preservative) in Water for Injection. Each mL of Dexamethasone Sodium Phosphate Injection 10 mg/mL contains dexamethasone sodium phosphate, equivalent to 10 mg dexamethasone phosphate or 8.33 mg dexamethasone. Inactive ingredients per mL: 1.5 mg sodium sulfite anhydrous, 16.5 mg sodium citrate anhydrous and 10.42 mg (0.01 mL) benzyl alcohol (preservative) in Water for Injection. The pH of both concentrations is 7.0-8.5; sodium hydroxide and/or citric acid used, if needed, for pH adjustment. Sealed under nitrogen.</Description>
  </NDC>
  <NDC>
    <NDCCode>72572-122-25</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (72572-122-25)  / 1 mL in 1 VIAL (72572-122-01) </PackageDescription>
    <NDC11Code>72572-0122-25</NDC11Code>
    <ProductNDC>72572-122</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dexamethasone Sodium Phosphate</ProprietaryName>
    <NonProprietaryName>Dexamethasone Sodium Phosphate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20191113</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA087702</ApplicationNumber>
    <LabelerName>Civica, Inc.</LabelerName>
    <SubstanceName>DEXAMETHASONE SODIUM PHOSPHATE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-12-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191113</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>A. Intravenous or intramuscular administration. When oral therapy is not feasible and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, those products labeled for intravenous or intramuscular use are indicated as follows. 1. Endocrine disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance). Acute adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; mineralocorticoid supplementation may be necessary, particularly when synthetic analogs are used). Preoperatively, and in the event of serious trauma or illness, in patients with known adrenal insufficiency or when adrenocortical reserve is doubtful. Shock unresponsive to conventional therapy if adrenocortical insufficiency exists or is suspected. Congenital adrenal hyperplasia. Nonsuppurative thyroiditis. Hypercalcemia associated with cancer. 2. Rheumatic disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in:. Post-traumatic osteoarthritis. Synovitis of osteoarthritis. Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). Acute and subacute bursitis. Epicondylitis. Acute nonspecific tenosynovitis. Acute gouty arthritis. Psoriatic arthritis. Ankylosing spondylitis. 3. Collagen diseases. During an exacerbation or as maintenance therapy in selected cases of. Systemic lupus erythematosus. Acute rheumatic carditis. 4. Dermatologic diseases. Pemphigus. Severe erythema multiforme (Stevens-Johnson Syndrome). Exfoliative dermatitis. Bullous dermatitis herpetiformis. Severe seborrheic dermatitis. Severe psoriasis. Mycosis fungoides. 5. Allergic states. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in. Bronchial asthma. Contact dermatitis. Atopic dermatitis. Serum sickness. Seasonal or perennial allergic rhinitis. Drug hypersensitivity reactions. Urticarial transfusion reactions. Acute noninfectious laryngeal edema (epinephrine is the drug of first choice). 6. Ophthalmic diseases. Severe acute and chronic allergic and inflammatory processes involving the eye, such as. Herpes zoster ophthalmicus. Iritis, iridocyclitis. Chorioretinitis. Diffuse posterior uveitis and choroiditis. Optic neuritis. Sympathetic ophthalmia. Anterior segment inflammation. Allergic conjunctivitis. Allergic corneal marginal ulcers. Keratitis. 7. Gastrointestinal diseases. To tide the patient over a critical period of the disease in. Ulcerative colitis (systemic therapy). Regional enteritis (systemic therapy). 8. Respiratory diseases. Symptomatic Sarcoidosis. Berylliosis. Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate anti-tuberculosis chemotherapy. Loeffler's syndrome not manageable by other means. Aspiration pneumonitis. 9. Hematologic disorders. Acquired (autoimmune) hemolytic anemia. Idiopathic thrombocytopenic purpura in adults (I.V. only; I.M. administration is contraindicated). Secondary thrombocytopenia in adults. Erythroblastopenia (RBC anemia). Congenital (erythroid) hypoplastic anemia. 10. Neoplastic diseases. For palliative management of. Leukemias and lymphomas in adults. Acute leukemia of childhood. 11. Edematous states. To induce diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 12. Nervous system. Acute exacerbations of multiple sclerosis. 13. Miscellaneous. Tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate anti-tuberculosis chemotherapy. Trichinosis with neurologic or myocardial involvement. Diagnostic testing of adrenocortical hyperfunction. Cerebral edema of diverse etiologies in conjunction with adequate neurological evaluation and management. B. Intra-articular or soft tissue administration.When the strength and dosage form of the drug lend the preparation to the treatment of the condition, those products labeled for intra-articular or soft tissue administration are indicated as adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in. Synovitis of osteoarthritis. Rheumatoid arthritis. Acute and subacute bursitis. Acute gouty arthritis. Epicondylitis. Acute nonspecific tenosynovitis. Post-traumatic osteoarthritis. C. Intralesional administration.When the strength and dosage form of the drug lend the preparation to the treatment of the condition, those products labeled for intralesional administration are indicated for. Keloids. Localized hypertrophic, infiltrated, inflammatory lesions of: lichen planus, psoriatic plaques, granuloma annulare, and lichen simplex chronicus (neurodermatitis). Discoid lupus erythematosus. Necrobiosis lipoidica diabeticorum. Alopecia areata. They also may be useful in cystic tumors of an aponeurosis tendon (ganglia).</IndicationAndUsage>
    <Description>Dexamethasone sodium phosphate injection, USP is a water-soluble inorganic ester of dexamethasone which produces a rapid response even when injected intramuscularly. Dexamethasone sodium phosphate, a synthetic adrenocortical steroid, is a white or slightly yellow crystalline powder. It is freely soluble in water and is exceedingly hygroscopic. The molecular weight is 516.41. It is designated chemically as 9-fluoro-11β,17-dihydroxy-16α-methyl-21-(phosphonooxy)pregna-1,4-diene-3, 20-dione disodium salt. The molecular formula is: C22H28FNa2O8P and the structural formula is. Dexamethasone Sodium Phosphate Injection is a sterile solution of dexamethasone sodium phosphate for intravenous and intramuscular use. The 4 mg/mL strength may also be used for intra-articular, intralesional and soft tissue administration. Each mL of Dexamethasone Sodium Phosphate Injection 4 mg/mL contains dexamethasone sodium phosphate, equivalent to 4 mg dexamethasone phosphate or 3.33 mg dexamethasone. Inactive ingredients per mL: 1 mg sodium sulfite anhydrous, 19.4 mg sodium citrate anhydrous and 10.42 mg (0.01 mL) benzyl alcohol (preservative) in Water for Injection. Each mL of Dexamethasone Sodium Phosphate Injection 10 mg/mL contains dexamethasone sodium phosphate, equivalent to 10 mg dexamethasone phosphate or 8.33 mg dexamethasone. Inactive ingredients per mL: 1.5 mg sodium sulfite anhydrous, 16.5 mg sodium citrate anhydrous and 10.42 mg (0.01 mL) benzyl alcohol (preservative) in Water for Injection. The pH of both concentrations is 7.0-8.5; sodium hydroxide and/or citric acid used, if needed, for pH adjustment. Sealed under nitrogen.</Description>
  </NDC>
  <NDC>
    <NDCCode>72572-170-25</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (72572-170-25)  / 2 mL in 1 VIAL (72572-170-01) </PackageDescription>
    <NDC11Code>72572-0170-25</NDC11Code>
    <ProductNDC>72572-170</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fentanyl Citrate</ProprietaryName>
    <NonProprietaryName>Fentanyl Citrate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20191210</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA019101</ApplicationNumber>
    <LabelerName>Civica, Inc.</LabelerName>
    <SubstanceName>FENTANYL CITRATE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>ug/mL</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-03-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191210</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fentanyl Citrate Injection is indicated for: 1 analgesic action of short duration during the anesthetic periods, premedication, induction and maintenance, and in the immediate postoperative period (recovery room) as the need arises. , 2 use as a narcotic analgesic supplement in general or regional anesthesia. , 3 administration with a neuroleptic as an anesthetic premedication, for the induction of anesthesia and as an adjunct in the maintenance of general and regional anesthesia. , 4 use as an anesthetic agent with oxygen in selected high-risk patients, such as those undergoing open heart surgery or certain complicated neurological or orthopedic procedures.</IndicationAndUsage>
    <Description>Fentanyl Citrate Injection is an opioid agonist, available as a sterile, non-pyrogenic solution containing fentanyl citrate as the active pharmaceutical ingredient, for intravenous or intramuscular administration. Fentanyl citrate is chemically identified as N‑(1‑Phenethyl‑4‑piperidyl) propionanilide citrate (1:1) with the following structural formula. Each mL contains fentanyl citrate equivalent to 50 mcg fentanyl base in Water for Injection. Sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The pH range is 4.0 – 7.5. Contains no preservative.</Description>
  </NDC>
  <NDC>
    <NDCCode>72572-171-25</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (72572-171-25)  / 5 mL in 1 VIAL (72572-171-01) </PackageDescription>
    <NDC11Code>72572-0171-25</NDC11Code>
    <ProductNDC>72572-171</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fentanyl Citrate</ProprietaryName>
    <NonProprietaryName>Fentanyl Citrate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20191210</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA019101</ApplicationNumber>
    <LabelerName>Civica, Inc.</LabelerName>
    <SubstanceName>FENTANYL CITRATE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>ug/mL</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2025-04-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191210</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fentanyl Citrate Injection is indicated for: 1 analgesic action of short duration during the anesthetic periods, premedication, induction and maintenance, and in the immediate postoperative period (recovery room) as the need arises. , 2 use as a narcotic analgesic supplement in general or regional anesthesia. , 3 administration with a neuroleptic as an anesthetic premedication, for the induction of anesthesia and as an adjunct in the maintenance of general and regional anesthesia. , 4 use as an anesthetic agent with oxygen in selected high risk patients, such as those undergoing open heart surgery or certain complicated neurological or orthopedic procedures.</IndicationAndUsage>
    <Description>Fentanyl Citrate Injection is an opioid agonist, available as a sterile, non-pyrogenic solution containing fentanyl citrate as the active pharmaceutical ingredient, for intravenous or intramuscular administration. Fentanyl citrate is chemically identified as N‑(1‑Phenethyl‑4‑piperidyl)propionanilide citrate (1:1) with the following structural formula. Each mL contains fentanyl citrate equivalent to 50 mcg fentanyl base in Water for Injection. Sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The pH range is 4.0 – 7.5. Contains no preservative.</Description>
  </NDC>
  <NDC>
    <NDCCode>72572-190-25</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 BOX (72572-190-25)  / 4 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>72572-0190-25</NDC11Code>
    <ProductNDC>72572-190</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Furosemide</ProprietaryName>
    <NonProprietaryName>Furosemide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20220923</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202747</ApplicationNumber>
    <LabelerName>Civica, Inc.</LabelerName>
    <SubstanceName>FUROSEMIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220923</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Parenteral therapy should be reserved for patients unable to take oral medication or for patients in emergency clinical situations.</IndicationAndUsage>
    <Description>Furosemide is a diuretic which is an anthranilic acid derivative. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide Injection 10 mg/mL is a sterile, non-pyrogenic solution in vials for intravenous and intramuscular injection. Furosemide is a white to off-white odorless crystalline powder. It is practically insoluble in water, sparingly soluble in alcohol, freely soluble in dilute alkali solutions and insoluble in dilute acids. The structural formula is as follows. Each mL contains: Furosemide 10 mg, Sodium Hydroxide 1.34 mg, Water for Injection q.s., Sodium Chloride for isotonicity, additional Sodium Hydroxide (q.s.) and, if necessary, Hydrochloric Acid (q.s.) to adjust pH between 8.0 and 9.3.</Description>
  </NDC>
  <NDC>
    <NDCCode>72572-225-25</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (72572-225-25)  &gt; 1 mL in 1 VIAL, SINGLE-DOSE (72572-225-01) </PackageDescription>
    <NDC11Code>72572-0225-25</NDC11Code>
    <ProductNDC>72572-225</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glycopyrrolate</ProprietaryName>
    <NonProprietaryName>Glycopyrrolate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20191210</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090963</ApplicationNumber>
    <LabelerName>Civica, Inc.</LabelerName>
    <SubstanceName>GLYCOPYRROLATE</SubstanceName>
    <StrengthNumber>.2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2020-10-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191210</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Glycopyrrolate Injection, USP is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, Glycopyrrolate Injection, USP may be used intraoperatively to counteract surgically or drug‑induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants.</IndicationAndUsage>
    <Description>Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains:    Glycopyrrolate, USP 0.2 mg    Water for Injection, USP q.s.    Benzyl Alcohol, NF 0.9% (preservative)pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3 [(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.33. Its structural formula is as follows. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection, USP is a clear, colorless, sterile liquid; pH 2.0 – 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P = -1.52) at ambient room temperature (24°C).</Description>
  </NDC>
  <NDC>
    <NDCCode>72572-226-25</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (72572-226-25)  / 1 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>72572-0226-25</NDC11Code>
    <ProductNDC>72572-226</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glycopyrrolate</ProprietaryName>
    <NonProprietaryName>Glycopyrrolate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20210131</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA089335</ApplicationNumber>
    <LabelerName>Civica, Inc.</LabelerName>
    <SubstanceName>GLYCOPYRROLATE</SubstanceName>
    <StrengthNumber>.2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-03-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210131</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>In Anesthesia: Glycopyrrolate injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, glycopyrrolate injection may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants. In Peptic Ulcer: For use in adults as adjunctive therapy for the treatment of peptic ulcer when rapid anticholinergic effect is desired or when oral medication is not tolerated.</IndicationAndUsage>
    <Description>Glycopyrrolate Injection, USP is a clear, colorless, sterile solution of Glycopyrrolate, USP with Benzyl Alcohol, NF in Water for Injection, USP. The formulation is used for intramuscular or intravenous administration. Each mL contains:Glycopyrrolate, USP…………………………..0.2 mgBenzyl Alcohol, NF (preservative)………….….0.9%Water for Injection, USP.................................... q.s. When necessary, pH (2.0 to 3.0) adjusted with hydrochloric acid and/or sodium hydroxide. Glycopyrrolate is a quaternary ammonium salt with the following chemical name. 3[(cyclopentylhydroxyphenylacetyl)oxy]-1, 1-dimethyl pyrrolidinium bromide.  Glycopyrrolate is a synthetic anticholinergic agent that has the following molecular structure and molecular weight. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P= -1.52) at ambient room temperature (24°C).</Description>
  </NDC>
  <NDC>
    <NDCCode>72572-232-25</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (72572-232-25)  / 15 mL in 1 VIAL, SINGLE-DOSE (72572-232-01) </PackageDescription>
    <NDC11Code>72572-0232-25</NDC11Code>
    <ProductNDC>72572-232</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Potassium Phosphates</ProprietaryName>
    <NonProprietaryName>Potassium Phosphate, Monobasic Potassium Phosphate, Dibasic</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20200210</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA212832</ApplicationNumber>
    <LabelerName>CIVICA, INC.</LabelerName>
    <SubstanceName>MONOBASIC POTASSIUM PHOSPHATE; DIBASIC POTASSIUM PHOSPHATE</SubstanceName>
    <StrengthNumber>224; 236</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260701</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Potassium Phosphates Injection is indicated as a source of phosphorus: : 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated. , 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated. .</IndicationAndUsage>
    <Description>Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as a 15 mL single-dose vial. Monobasic Potassium Phosphate is chemically designated KH2PO4, molecular weight 136.09, white, odorless crystals or granules freely soluble in water. Dibasic Potassium Phosphate is chemically designated K2HPO4, molecular weight 174.18, colorless or white granular salt freely soluble in water. Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route.</Description>
  </NDC>
  <NDC>
    <NDCCode>72572-235-25</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (72572-235-25)  / 1 mL in 1 VIAL, SINGLE-DOSE (72572-235-01) </PackageDescription>
    <NDC11Code>72572-0235-25</NDC11Code>
    <ProductNDC>72572-235</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Epinephrine</ProprietaryName>
    <NonProprietaryName>Epinephrine</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAOCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20241121</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213708</ApplicationNumber>
    <LabelerName>CIVICA, INC.</LabelerName>
    <SubstanceName>EPINEPHRINE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-07-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241121</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Epinephrine is a non-selective alpha and beta adrenergic agonist indicated: : 1 To increase mean arterial blood pressure in adult patients with hypotension associated with septic shock. (1.1) , 2 For emergency treatment of allergic reactions (Type 1), including anaphylaxis. (1.2) , 3 For induction and maintenance of mydriasis during intraocular surgery. (1.3) .</IndicationAndUsage>
    <Description>Epinephrine Injection, USP is a clear, colorless, sterile solution containing 1 mg/mL epinephrine, packaged as a 1 mL solution in a single-dose vial. Each mL of Epinephrine Injection, USP solution contains 1 mg epinephrine, sodium chloride 8.6 mg (for isotonicity), sodium metabisulfite 0.25 mg (as preservative), citric acid 0.5 mg and hydrochloric acid for pH adjustment and water for injection, USP, qs. The pH range is 3.0-3.6. Solution must be diluted prior to intravenous or ocular use. Epinephrine is a sympathomimetic catecholamine. The chemical name of epinephrine is: 1,2- Benzenediol, 4-[(1R)-1-hydroxy-2-(methylamino)ethyl]-, or (-)-3,4-Dihydroxy-α-[2-(methylamino)ethyl]benzyl alcohol. The chemical structure of epinephrine is:. The molecular weight of epinephrine is 183.2. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin.</Description>
  </NDC>
</NDCList>