{
"NDC": [
{
"NDCCode": "72572-550-10",
"PackageDescription": "10 VIAL in 1 CARTON (72572-550-10) / 10 mL in 1 VIAL (72572-550-01) ",
"NDC11Code": "72572-0550-10",
"ProductNDC": "72572-550",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pantoprazole Sodium",
"NonProprietaryName": "Pantoprazole Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20201115",
"EndMarketingDate": "20251031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090296",
"LabelerName": "Civica, Inc.",
"SubstanceName": "PANTOPRAZOLE SODIUM",
"StrengthNumber": "40",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20201115",
"EndMarketingDatePackage": "20251031",
"SamplePackage": "N",
"IndicationAndUsage": "Pantoprazole Sodium is indicated for treatment of: 1 gastroesophageal reflux disease (GERD) and a history of erosive esophagitis (EE) for up to 10 days in adults and up to 7 days in pediatric patients 3 months and older., 2 pathological hypersecretory conditions including Zollinger-Ellison (ZE) Syndrome in adults.",
"Description": "The active ingredient in pantoprazole sodium for injection (pantoprazole sodium), a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its molecular formula is C16H14F2N3NaO4S, with a molecular weight of 405.4. The structural formula is. Pantoprazole sodium is a white to off-white crystalline powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. The reconstituted solution of pantoprazole sodium for injection is in the pH range 9.0 to 10.5. Pantoprazole sodium for injection is supplied for intravenous administration as a sterile, freeze-dried powder in a single-dose clear glass vial fitted with a rubber stopper and crimp seal. Each vial contains 40 mg pantoprazole (equivalent to 45.1 mg of pantoprazole sodium), edetate disodium (1 mg), and sodium hydroxide to adjust pH. USP test 2 is used for organic impurities test."
},
{
"NDCCode": "11673-550-50",
"PackageDescription": "5 BLISTER PACK in 1 CARTON (11673-550-50) / 10 CAPSULE, LIQUID FILLED in 1 BLISTER PACK",
"NDC11Code": "11673-0550-50",
"ProductNDC": "11673-550",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Gas Relief",
"ProprietaryNameSuffix": "Extra Strength",
"NonProprietaryName": "Simethicone",
"DosageFormName": "CAPSULE, LIQUID FILLED",
"RouteName": "ORAL",
"StartMarketingDate": "20130830",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M002",
"LabelerName": "Target Corporation",
"SubstanceName": "DIMETHICONE, UNSPECIFIED",
"StrengthNumber": "125",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Skin Barrier Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2026-09-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20130830",
"SamplePackage": "N",
"IndicationAndUsage": "pressure, bloating, and fullness commonly referred to as gas."
},
{
"NDCCode": "16729-550-10",
"PackageDescription": "30 TABLET in 1 BOTTLE, PLASTIC (16729-550-10) ",
"NDC11Code": "16729-0550-10",
"ProductNDC": "16729-550",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buprenorphine Hydrochloride And Naloxone Hydrochloride Dihydrate",
"NonProprietaryName": "Buprenorphine Hydrochloride And Naloxone Hydrochloride Dihydrate",
"DosageFormName": "TABLET",
"RouteName": "SUBLINGUAL",
"StartMarketingDate": "20200901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209069",
"LabelerName": "Accord Healthcare, Inc",
"SubstanceName": "BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE DIHYDRATE",
"StrengthNumber": "8; 2",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2023-05-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200901",
"SamplePackage": "N",
"IndicationAndUsage": "Buprenorphine and naloxone sublingual tablets are indicated for the maintenance treatment of opioid dependence. Buprenorphine and naloxone sublingual tablets should be used as part of a complete treatment plan that includes counseling and psychosocial support.",
"Description": "Buprenorphine and Naloxone Sublingual Tablets, USP are uncoated white to off-white, round biconvex tablets, debossed with an alpha-numeric imprint identifying the product and strength on one side, and plain on the other. They contain buprenorphine HCl, a partial agonist at the mu-opioid receptor, and naloxone HCl dihydrate, an opioid receptor antagonist, at a ratio of 4:1 (ratio of free bases). They are intended for sublingual administration and are available in two dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone and 8 mg buprenorphine with 2 mg naloxone. Each sublingual tablet also contains citric acid anhydrous, crospovidone, lactose monohydrate, magnesium stearate, mannitol, corn syrup solids, modified food starch, natural lemon flavor, pregelatinized starch (maize), povidone, sodium citrate dihydrate, and sucralose. Chemically, buprenorphine HCl is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy- 6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure. Buprenorphine HCl has the molecular formula C29H41NO4HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemically, naloxone HCl dihydrate is 17-Allyl-4, 5 α -epoxy-3, 14-dihydroxymorphinan-6-one hydrochloride dihydrate. It has the following chemical structure. Naloxone hydrochloride dihydrate has the molecular formula C19H21NO4HCl2H2O and the molecular weight is 399.87. It is a white to slightly off-white powder and is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether."
},
{
"NDCCode": "24385-550-10",
"PackageDescription": "1 BOTTLE in 1 CARTON (24385-550-10) / 30 mL in 1 BOTTLE",
"NDC11Code": "24385-0550-10",
"ProductNDC": "24385-550",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Good Neighbor Pharmacy Ibuprofen",
"NonProprietaryName": "Ibuprofen",
"DosageFormName": "SUSPENSION/ DROPS",
"RouteName": "ORAL",
"StartMarketingDate": "20041012",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075217",
"LabelerName": "Amerisource Bergen",
"SubstanceName": "IBUPROFEN",
"StrengthNumber": "50",
"StrengthUnit": "mg/1.25mL",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20041012",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily: 1 reduces fever, 2 relieves minor aches and pains due to the common cold, flu, sore throat, headaches and toothaches."
},
{
"NDCCode": "36800-550-50",
"PackageDescription": "5 BLISTER PACK in 1 CARTON (36800-550-50) > 10 CAPSULE, LIQUID FILLED in 1 BLISTER PACK",
"NDC11Code": "36800-0550-50",
"ProductNDC": "36800-550",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Gas Relief",
"ProprietaryNameSuffix": "Extra Strength",
"NonProprietaryName": "Simethicone",
"DosageFormName": "CAPSULE, LIQUID FILLED",
"RouteName": "ORAL",
"StartMarketingDate": "20130531",
"EndMarketingDate": "20191231",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part347",
"LabelerName": "TOP CARE (Topco Associates LLC)",
"SubstanceName": "DIMETHICONE",
"StrengthNumber": "125",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20130531",
"EndMarketingDatePackage": "20191231",
"SamplePackage": "N"
},
{
"NDCCode": "41163-550-50",
"PackageDescription": "5 BLISTER PACK in 1 CARTON (41163-550-50) > 10 CAPSULE, LIQUID FILLED in 1 BLISTER PACK",
"NDC11Code": "41163-0550-50",
"ProductNDC": "41163-550",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Gas Relief",
"ProprietaryNameSuffix": "Extra Strength",
"NonProprietaryName": "Simethicone",
"DosageFormName": "CAPSULE, LIQUID FILLED",
"RouteName": "ORAL",
"StartMarketingDate": "20100708",
"EndMarketingDate": "20191231",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part332",
"LabelerName": "EQUALINE (SuperValu)",
"SubstanceName": "DIMETHICONE",
"StrengthNumber": "125",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20100708",
"EndMarketingDatePackage": "20191231",
"SamplePackage": "N"
},
{
"NDCCode": "43063-550-10",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (43063-550-10) ",
"NDC11Code": "43063-0550-10",
"ProductNDC": "43063-550",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sildenafil",
"NonProprietaryName": "Sildenafil Citrate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120927",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA021845",
"LabelerName": "PD-Rx Pharmaceuticals, Inc.",
"SubstanceName": "SILDENAFIL CITRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2022-08-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20141029",
"SamplePackage": "N"
},
{
"NDCCode": "43547-550-10",
"PackageDescription": "100 TABLET in 1 BOTTLE (43547-550-10) ",
"NDC11Code": "43547-0550-10",
"ProductNDC": "43547-550",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride",
"NonProprietaryName": "Potassium Chloride Extended-release",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190430",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209922",
"LabelerName": "Solco Healthcare LLC",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "1500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2020-02-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190430",
"SamplePackage": "N",
"Description": "The potassium chloride extended-release tablets, USP 20 mEq product is an immediately dispersing extended release oral dosage form of potassium chloride containing 1500 mg of microencapsulated potassium chloride, USP equivalent to 20 mEq of potassium in a tablet. The potassium chloride extended-release tablets, USP 15 mEq product is an immediately dispersing extended release oral dosage form of potassium chloride containing 1125 mg of microencapsulated potassium chloride, USP equivalent to 15 mEq of potassium in a tablet. The potassium chloride extended-release tablets, USP 10 mEq product is an immediately dispersing extended release oral dosage form of potassium chloride containing 750 mg of microencapsulated potassium chloride, USP equivalent to 10 mEq of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Potassium chloride is an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Potassium chloride, USP occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Potassium chloride is a tablet formulation (not enteric coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of out-side agitation, potassium chloride tablets begin disintegrating into microencapsulated crystals within seconds and completely disintegrates within 1 minute. The microencapsulated crystals are formulated to provide an extended release of potassium chloride. Inactive Ingredients: croscarmellose sodium, ethylcellulose, microcrystalline cellulose, copovidone and sodium stearyl fumarate. USP sample preparation 2 is used in the assay. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "46122-550-60",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (46122-550-60) > 10 TABLET, CHEWABLE in 1 BLISTER PACK",
"NDC11Code": "46122-0550-60",
"ProductNDC": "46122-550",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Childrens Loratadine",
"NonProprietaryName": "Loratadine",
"DosageFormName": "TABLET, CHEWABLE",
"RouteName": "ORAL",
"StartMarketingDate": "20180701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210088",
"LabelerName": "Amerisource Bergen",
"SubstanceName": "LORATADINE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2026-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180701",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose, 2 sneezing, 3 itchy, watery eyes, 4 itching of the nose or throat."
},
{
"NDCCode": "49035-550-20",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (49035-550-20) > 10 CAPSULE, LIQUID FILLED in 1 BLISTER PACK",
"NDC11Code": "49035-0550-20",
"ProductNDC": "49035-550",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Gas Relief",
"ProprietaryNameSuffix": "Extra Strength",
"NonProprietaryName": "Simethicone",
"DosageFormName": "CAPSULE, LIQUID FILLED",
"RouteName": "ORAL",
"StartMarketingDate": "20100706",
"EndMarketingDate": "20201231",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part332",
"LabelerName": "EQUATE (Wal-Mart Stores, Inc.)",
"SubstanceName": "DIMETHICONE",
"StrengthNumber": "125",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20100706",
"EndMarketingDatePackage": "20201231",
"SamplePackage": "N"
},
{
"NDCCode": "49349-550-08",
"PackageDescription": "10 TABLET in 1 BLISTER PACK (49349-550-08)",
"NDC11Code": "49349-0550-08",
"ProductNDC": "49349-550",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisone",
"NonProprietaryName": "Prednisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20130726",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA083677",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "PREDNISONE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "50458-550-10",
"PackageDescription": "10 BLISTER PACK in 1 BOX, UNIT-DOSE (50458-550-10) > 10 TABLET, EXTENDED RELEASE in 1 BLISTER PACK",
"NDC11Code": "50458-0550-10",
"ProductNDC": "50458-550",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Invega",
"NonProprietaryName": "Paliperidone",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20061219",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021999",
"LabelerName": "Janssen Pharmaceuticals, Inc.",
"SubstanceName": "PALIPERIDONE",
"StrengthNumber": "3",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-08-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20061219",
"EndMarketingDatePackage": "20200731",
"SamplePackage": "N"
},
{
"NDCCode": "55118-550-10",
"PackageDescription": "1 L in 1 BOTTLE, PLASTIC (55118-550-10)",
"NDC11Code": "55118-0550-10",
"ProductNDC": "55118-550",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Kleenex Antibacterial Skin Cleanser Fragrance Free",
"NonProprietaryName": "Benzalkonium Chloride",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20120301",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333E",
"LabelerName": "Kimberly-Clark Corporation",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": "1.3",
"StrengthUnit": "g/L",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "For handwashing to decrease bacteria on the skin."
},
{
"NDCCode": "55312-550-50",
"PackageDescription": "5 BLISTER PACK in 1 CARTON (55312-550-50) > 10 CAPSULE, LIQUID FILLED in 1 BLISTER PACK",
"NDC11Code": "55312-0550-50",
"ProductNDC": "55312-550",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Antigas",
"ProprietaryNameSuffix": "Extra Strength",
"NonProprietaryName": "Simethicone",
"DosageFormName": "CAPSULE, LIQUID FILLED",
"RouteName": "ORAL",
"StartMarketingDate": "20100313",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part332",
"LabelerName": "Western Family Foods, Inc.",
"SubstanceName": "DIMETHICONE",
"StrengthNumber": "125",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "55319-550-20",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (55319-550-20) > 10 CAPSULE, LIQUID FILLED in 1 BLISTER PACK",
"NDC11Code": "55319-0550-20",
"ProductNDC": "55319-550",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Gas Relief",
"ProprietaryNameSuffix": "Extra Strength",
"NonProprietaryName": "Simethicone",
"DosageFormName": "CAPSULE, LIQUID FILLED",
"RouteName": "ORAL",
"StartMarketingDate": "20130630",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part347",
"LabelerName": "Family Dollar (FAMILY WELLNESS)",
"SubstanceName": "DIMETHICONE",
"StrengthNumber": "125",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2017-12-07"
},
{
"NDCCode": "58411-550-10",
"PackageDescription": "1 BOTTLE in 1 CARTON (58411-550-10) / 35 mL in 1 BOTTLE",
"NDC11Code": "58411-0550-10",
"ProductNDC": "58411-550",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cle De Peau Beaute Radiant Fluid Foundation",
"ProprietaryNameSuffix": "B20",
"NonProprietaryName": "Titanium Dioxide",
"DosageFormName": "EMULSION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200701",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "SHISEIDO AMERICAS CORPORATION",
"SubstanceName": "TITANIUM DIOXIDE",
"StrengthNumber": "2.72118",
"StrengthUnit": "g/35mL",
"Status": "Active",
"LastUpdate": "2026-01-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200701",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun ."
},
{
"NDCCode": "60923-550-59",
"PackageDescription": "1 KIT in 1 CARTON (60923-550-59) * 10 mL in 1 VIAL, SINGLE-USE (60923-562-01) * 59 POUCH in 1 BOX / 1 SWAB in 1 POUCH",
"NDC11Code": "60923-0550-59",
"ProductNDC": "60923-550",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Elevidys",
"NonProprietaryName": "Delandistrogene Moxeparvovec-rokl",
"DosageFormName": "KIT",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230622",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125781",
"LabelerName": "Sarepta Therapeutics, Inc.",
"Status": "Active",
"LastUpdate": "2026-08-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230622",
"SamplePackage": "N",
"IndicationAndUsage": "ELEVIDYS is indicated for the treatment of patients 4 years of age and older with Duchenne muscular dystrophy (DMD), who are ambulatory and have a confirmed mutation in the DMD gene [see Clinical Pharmacology (12.2), Clinical Studies (14)].",
"Description": "ELEVIDYS (delandistrogene moxeparvovec-rokl) is a recombinant gene therapy designed to deliver the gene encoding the ELEVIDYS micro-dystrophin protein. ELEVIDYS is a non-replicating, recombinant, adeno-associated virus serotype rh74 (AAVrh74) based vector containing the ELEVIDYS micro-dystrophin transgene under the control of the MHCK7 promoter. The genome within the ELEVIDYS AAVrh74 vector contains no viral genes and consequently is incapable of replication or reversion to a replicating form. The micro-dystrophin protein expressed by ELEVIDYS is a shortened version (138 kDa, compared to 427 kDa size of dystrophin expressed in normal muscle cells) that contains selected domains of dystrophin expressed in normal muscle cells. ELEVIDYS is a preservative-free, sterile, clear, colorless liquid that may have some opalescence and may contain white to off-white particles. ELEVIDYS is a suspension for intravenous infusion with a nominal concentration of 1.33 ×1013 vg/mL and supplied in a single-dose 10 mL vial. Each vial contains an extractable volume of 10 mL and the following excipients: 200mM sodium chloride, 13 mM tromethamine HCl, 7 mM tromethamine, 1mM magnesium chloride, 0.001% poloxamer 188, with a pH of 8.0 ± 0.3."
},
{
"NDCCode": "62157-550-01",
"PackageDescription": "10 g in 1 JAR (62157-550-01)",
"NDC11Code": "62157-0550-01",
"ProductNDC": "62157-550",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Anastrozole",
"DosageFormName": "POWDER",
"StartMarketingDate": "20180406",
"MarketingCategoryName": "BULK INGREDIENT FOR ANIMAL DRUG COMPOUNDING",
"LabelerName": "AX Pharmaceutical Corp",
"SubstanceName": "ANASTROZOLE",
"StrengthNumber": "9.9",
"StrengthUnit": "g/10g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "63304-550-10",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (63304-550-10)",
"NDC11Code": "63304-0550-10",
"ProductNDC": "63304-550",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Quinapril",
"NonProprietaryName": "Quinapril",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070924",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076607",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "QUINAPRIL HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Quinapril tablets, USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with quinapril tablets, USP. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Quinapril tablets, USP may be used alone or in combination with thiazide diuretics. Heart Failure. Quinapril tablets, USP are indicated in the management of heart failure as adjunctive therapy when added to conventional therapy including diuretics and/or digitalis. In using quinapril tablets, USP, consideration should be given to the fact that another angiotensin-converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease. Available data are insufficient to show that quinapril does not have a similar risk (see WARNINGS).",
"Description": "Quinapril hydrochloride is the hydrochloride salt of quinapril, the ethyl ester of a non-sulfhydryl, angiotensin-converting enzyme (ACE) inhibitor, quinaprilat. Quinapril hydrochloride is chemically described as [3S-[2[R*(R*)],3R*]]-2-[2-[[1-(ethoxycarbonyl)-3-phenylpropyl]amino]-1-oxopropyl]-1,2,3,4-tetrahydro-3-isoquinolinecarboxylic acid, monohydrochloride. Its molecular formula is C25H30N2O5HCl and its structural formula is. Quinapril hydrochloride, USP is a white to off-white powder with a pink cast at times that is freely soluble in aqueous solvents (water). Quinapril tablets, USP contain 5 mg, 10 mg, 20 mg, or 40 mg of quinapril hydrochloride, USP for oral administration. Each tablet also contains crospovidone, lecithin, magnesium carbonate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, povidone, talc, titanium dioxide and xanthan gum."
},
{
"NDCCode": "63824-550-20",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (63824-550-20) > 10 TABLET, COATED in 1 BLISTER PACK",
"NDC11Code": "63824-0550-20",
"ProductNDC": "63824-550",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Mucinex Fast-max",
"ProprietaryNameSuffix": "Night Time Cold And Flu",
"NonProprietaryName": "Acetaminophen, Diphenhydramine Hydrochloride, And Phenylephrine Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20130430",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "Reckitt Benckiser LLC",
"SubstanceName": "ACETAMINOPHEN; DIPHENHYDRAMINE HYDROCHLORIDE; PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "325; 25; 5",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "68083-550-10",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (68083-550-10) > 1 mL in 1 VIAL, SINGLE-DOSE (68083-550-01) ",
"NDC11Code": "68083-0550-10",
"ProductNDC": "68083-550",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Desmopressin Acetate",
"NonProprietaryName": "Desmopressin Acetate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20221116",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216922",
"LabelerName": "Gland Pharma Limited",
"SubstanceName": "DESMOPRESSIN ACETATE",
"StrengthNumber": "4",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Factor VIII Activator [EPC], Increased Coagulation Factor VIII Activity [PE], Increased Coagulation Factor VIII Concentration [PE], Vasopressin Analog [EPC], Vasopressins [CS]",
"Status": "Active",
"LastUpdate": "2022-11-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20221116",
"SamplePackage": "N",
"IndicationAndUsage": "Desmopressin acetate injection is a vasopressin analog used for: 1 Central Diabetes Insipidus - as antidiuretic replacement therapy in the management of central (cranial) diabetes insipidus and for the management of the temporary polyuria and polydipsia following head trauma or surgery in the pituitary region. (1.1), 2 Hemophilia A- for patients with factor VIII coagulant activity levels greater than 5% to maintain hemostasis during surgical procedures and postoperatively or reduce bleeding with episodes of spontaneous or traumatic injuries such as hemarthroses, intramuscular hematomas, or mucosal bleeding. (1.2), 3 von Willebrand’s disease (Type I) - for patients with mild to moderate disease with factor VIII levels greater than 5% to maintain hemostasis during surgical procedures or traumatic injuries such as hemarthroses, intramuscular hematomas, or mucosal bleeding. (1.3).",
"Description": "Desmopressin acetate injection, USP is a synthetic vasopressin analog for intravenous or subcutaneous use. It is chemically defined as follows:Mol. Wt. 1183.34Empirical Formula: C46H64N14O12S2C2H4O23H2O. 1-(3-mercaptopropionic acid)-8-D-arginine vasopressin monoacetate (salt) trihydrate.Desmopressin acetate injection, USP is a sterile solution in a 1 mL single-dose vial: Each mL contains 4 mcg of desmopressin acetate, USP which is equivalent to 3.6 mcg of desmopressin free base. The inactive ingredients are sodium chloride USP, hydrochloric acid, NF and water for injection, USP. Sodium chloride is used to adjust tonicity. Hydrochloric acid is used to adjust pH."
},
{
"NDCCode": "68382-550-10",
"PackageDescription": "1000 TABLET, EXTENDED RELEASE in 1 BOTTLE (68382-550-10) ",
"NDC11Code": "68382-0550-10",
"ProductNDC": "68382-550",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Minocycline Hydrochloride",
"NonProprietaryName": "Minocycline Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20250612",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203553",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "MINOCYCLINE HYDROCHLORIDE",
"StrengthNumber": "55",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Prothrombin Activity [PE], Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2025-06-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250612",
"SamplePackage": "N",
"IndicationAndUsage": "Minocycline hydrochloride extended-release tablets are indicated to treat inflammatory lesions of non-nodular moderate to severe acne vulgaris in patients 12 years of age and older. Limitations of Use: 1 Minocycline hydrochloride extended-release tablets did not demonstrate any effect on non-inflammatory acne lesions., 2 This formulation of minocycline has not been evaluated in the treatment of infections [see Clinical Studies (14)]., 3 To reduce the development of drug-resistant bacteria as well as to maintain the effectiveness of other antibacterial drugs, use minocycline hydrochloride extended-release tablets only as indicated [see Warnings and Precautions (5.12)].",
"Description": "Minocycline hydrochloride, a semi synthetic derivative of tetracycline, is [4S-(4α,4aα,5aα,12aα)]-4,7-Bis(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,10, 12,12a-tetrahydroxy-1,11-dioxo-2-naphthacenecarboxamide mono hydrochloride. The structural formula is represented below. C23H27N3O7HCl M. W. 493.95. Each minocycline hydrochloride extended-release tablet, USP intended for oral administration contains minocycline hydrochloride equivalent to 45 mg, 55 mg, 65 mg, 80 mg, 90 mg, 105 mg, 115 mg or 135 mg of minocycline. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol (55 mg, 65 mg, 80 mg, 90 mg, 105 mg, 115 mg and 135 mg only), titanium dioxide and triacetin. Additionally, the 45 mg tablets contain ferric oxide black and ferric oxide yellow; the 55 mg tablets contain ferric oxide red and ferric oxide yellow; the 65 mg tablets contain FD & C blue #2 aluminum lake; the 80 mg tablets contain FD & C blue #2 aluminum lake and FD & C red #40 aluminum lake; the 90 mg tablets contain D & C yellow #10 aluminum lake, ferric oxide red and ferric oxide yellow; the 105 mg tablets contain FD & C blue #2 aluminum lake and FD & C red #40 aluminum lake; the 115 mg tablets contain FD & C blue #2 aluminum lake and ferric oxide yellow; the 135 mg tablets contain D & C red #27 aluminum lake, D & C yellow #10 aluminum lake and FD & C blue #2 aluminum lake. USP dissolution test-8 used. USP organic impurities procedure pending."
},
{
"NDCCode": "68382-550-30",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (68382-550-30) / 10 TABLET, EXTENDED RELEASE in 1 BLISTER PACK",
"NDC11Code": "68382-0550-30",
"ProductNDC": "68382-550",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Minocycline Hydrochloride",
"NonProprietaryName": "Minocycline Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20250612",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203553",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "MINOCYCLINE HYDROCHLORIDE",
"StrengthNumber": "55",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Prothrombin Activity [PE], Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2025-06-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250612",
"SamplePackage": "N",
"IndicationAndUsage": "Minocycline hydrochloride extended-release tablets are indicated to treat inflammatory lesions of non-nodular moderate to severe acne vulgaris in patients 12 years of age and older. Limitations of Use: 1 Minocycline hydrochloride extended-release tablets did not demonstrate any effect on non-inflammatory acne lesions., 2 This formulation of minocycline has not been evaluated in the treatment of infections [see Clinical Studies (14)]., 3 To reduce the development of drug-resistant bacteria as well as to maintain the effectiveness of other antibacterial drugs, use minocycline hydrochloride extended-release tablets only as indicated [see Warnings and Precautions (5.12)].",
"Description": "Minocycline hydrochloride, a semi synthetic derivative of tetracycline, is [4S-(4α,4aα,5aα,12aα)]-4,7-Bis(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,10, 12,12a-tetrahydroxy-1,11-dioxo-2-naphthacenecarboxamide mono hydrochloride. The structural formula is represented below. C23H27N3O7HCl M. W. 493.95. Each minocycline hydrochloride extended-release tablet, USP intended for oral administration contains minocycline hydrochloride equivalent to 45 mg, 55 mg, 65 mg, 80 mg, 90 mg, 105 mg, 115 mg or 135 mg of minocycline. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol (55 mg, 65 mg, 80 mg, 90 mg, 105 mg, 115 mg and 135 mg only), titanium dioxide and triacetin. Additionally, the 45 mg tablets contain ferric oxide black and ferric oxide yellow; the 55 mg tablets contain ferric oxide red and ferric oxide yellow; the 65 mg tablets contain FD & C blue #2 aluminum lake; the 80 mg tablets contain FD & C blue #2 aluminum lake and FD & C red #40 aluminum lake; the 90 mg tablets contain D & C yellow #10 aluminum lake, ferric oxide red and ferric oxide yellow; the 105 mg tablets contain FD & C blue #2 aluminum lake and FD & C red #40 aluminum lake; the 115 mg tablets contain FD & C blue #2 aluminum lake and ferric oxide yellow; the 135 mg tablets contain D & C red #27 aluminum lake, D & C yellow #10 aluminum lake and FD & C blue #2 aluminum lake. USP dissolution test-8 used. USP organic impurities procedure pending."
},
{
"NDCCode": "71052-550-10",
"PackageDescription": "100 g in 1 CONTAINER (71052-550-10) ",
"NDC11Code": "71052-0550-10",
"ProductNDC": "71052-550",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Indomethacin",
"DosageFormName": "POWDER",
"StartMarketingDate": "20190725",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "DARMERICA, LLC",
"SubstanceName": "INDOMETHACIN",
"StrengthNumber": "1000",
"StrengthUnit": "g/1000g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "05-MAR-20"
},
{
"NDCCode": "71919-550-10",
"PackageDescription": "100 mL in 1 BOTTLE, GLASS (71919-550-10) ",
"NDC11Code": "71919-0550-10",
"ProductNDC": "71919-550",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Podophyllinum",
"NonProprietaryName": "Podophyllum Resin",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20100324",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "PODOPHYLLUM RESIN",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/mL",
"Status": "Deprecated",
"LastUpdate": "2022-03-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20100324",
"SamplePackage": "N"
},
{
"NDCCode": "72789-550-10",
"PackageDescription": "10 CAPSULE in 1 BOTTLE, PLASTIC (72789-550-10) ",
"NDC11Code": "72789-0550-10",
"ProductNDC": "72789-550",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefdinir",
"NonProprietaryName": "Cefdinir",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20080107",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065434",
"LabelerName": "PD-Rx Pharmaceuticals, Inc.",
"SubstanceName": "CEFDINIR",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2026-02-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260224",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of cefdinir and other antibacterial drugs, cefdinir should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Cefdinir capsules, USP are indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the conditions listed below.",
"Description": "Cefdinir capsules, USP contain the active ingredient cefdinir, an extended-spectrum, semisynthetic cephalosporin, for oral administration. Chemically, cefdinir is [6R-[6α, 7β (Z)]]-7-[[(2-amino-4-thiazolyl)(hydroxyimino)acetyl]amino]-3-ethenyl-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid. Cefdinir USP is a white to slightly brownish-yellow solid. It is slightly soluble in dilute hydrochloric acid and sparingly soluble in 0.1 M pH 7.0 phosphate buffer. The molecular formula is C 14H 13N 5O 5S 2and the molecular weight is 395.42. Cefdinir has the structural formula shown below:. Cefdinir capsules, USP contain 300 mg cefdinir USP and the following inactive ingredients: carboxymethylcellulose calcium, colloidal silicon dioxide and magnesium stearate. The empty hard gelatin capsule shells contain FD&C Blue #1, D&C Red #28, titanium dioxide, gelatin and sodium lauryl sulphate. The capsules are printed with edible ink containing black iron oxide and shellac."
},
{
"NDCCode": "72572-016-10",
"PackageDescription": "10 VIAL, GLASS in 1 CARTON (72572-016-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, GLASS (72572-016-01) ",
"NDC11Code": "72572-0016-10",
"ProductNDC": "72572-016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin",
"NonProprietaryName": "Ampicillin",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20201201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062719",
"LabelerName": "Civica, Inc.",
"SubstanceName": "AMPICILLIN SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201201",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infections caused by Streptococcus pneumoniae, Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli, Group B streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.",
"Description": "Ampicillin for Injection, USP the monosodium salt of [2S-[2α,5α,6ß(S*)]]-6[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10."
},
{
"NDCCode": "72572-017-10",
"PackageDescription": "10 VIAL, GLASS in 1 CARTON (72572-017-10) / 2 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, GLASS (72572-017-01) ",
"NDC11Code": "72572-0017-10",
"ProductNDC": "72572-017",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin",
"NonProprietaryName": "Ampicillin",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20201201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062797",
"LabelerName": "Civica, Inc.",
"SubstanceName": "AMPICILLIN SODIUM",
"StrengthNumber": "2",
"StrengthUnit": "g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201201",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infections caused by Streptococcus pneumoniae, Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli, Group B streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.",
"Description": "Ampicillin for Injection, USP the monosodium salt of [2S-[2α,5α,6ß(S*)]]-6[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10."
},
{
"NDCCode": "72572-021-10",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (72572-021-10) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (72572-021-01) ",
"NDC11Code": "72572-0021-10",
"ProductNDC": "72572-021",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin And Sulbactam",
"NonProprietaryName": "Ampicillin And Sulbactam",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20220110",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090579",
"LabelerName": "Civica, Inc.",
"SubstanceName": "AMPICILLIN SODIUM; SULBACTAM SODIUM",
"StrengthNumber": "1; .5",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-03-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20220110",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin and sulbactam for injection, USP is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli*, Klebsiella spp.* (including K. pneumoniae*), Proteus mirabilis*, Bacteroides fragilis*, Enterobacter spp.*, and Acinetobacter calcoaceticus*. NOTE: For information on use in pediatric patients (see PRECAUTIONS-Pediatric Use and CLINICAL STUDIES sections). Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae*), Bacteroides spp. (including B. fragilis), and Enterobacter spp.*. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli*, and Bacteroides spp.* (including B. fragilis*). * Efficacy for this organism in this organ system was studied in fewer than 10 infections. While ampicillin and sulbactam for injection, USP is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with ampicillin and sulbactam for injection, USP due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to ampicillin and sulbactam for injection, USP should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to ampicillin and sulbactam for injection, USP. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of ampicillin and sulbactam for injection, USP and other antibacterial drugs, ampicillin and sulbactam for injection, USP should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Ampicillin and Sulbactam for Injection is an injectable antibacterial combination consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S,5R,6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1- azabicyclo[3.2.0] heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection, ampicillin sodium/sulbactam sodium parenteral combination, is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8.0 and 10.0. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 1.5 gram vial of Ampicillin and Sulbactam for Injection contains 1 gram ampicillin as the sodium salt plus 0.5 gram sulbactam as the sodium salt. The sodium content is approximately 115 mg (5 mEq) of sodium per vial. Each 3 gram vial of Ampicillin and Sulbactam for Injection contains 2 grams ampicillin as the sodium salt plus 1 gram sulbactam as the sodium salt. The sodium content is approximately 230 mg (10 mEq) of sodium per vial."
},
{
"NDCCode": "72572-022-10",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (72572-022-10) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (72572-022-01) ",
"NDC11Code": "72572-0022-10",
"ProductNDC": "72572-022",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin And Sulbactam",
"NonProprietaryName": "Ampicillin And Sulbactam",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20220110",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090579",
"LabelerName": "Civica, Inc.",
"SubstanceName": "AMPICILLIN SODIUM; SULBACTAM SODIUM",
"StrengthNumber": "2; 1",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-03-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20220110",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin and sulbactam for injection, USP is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli*, Klebsiella spp.* (including K. pneumoniae*), Proteus mirabilis*, Bacteroides fragilis*, Enterobacter spp.*, and Acinetobacter calcoaceticus*. NOTE: For information on use in pediatric patients (see PRECAUTIONS-Pediatric Use and CLINICAL STUDIES sections). Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae*), Bacteroides spp. (including B. fragilis), and Enterobacter spp.*. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli*, and Bacteroides spp.* (including B. fragilis*). * Efficacy for this organism in this organ system was studied in fewer than 10 infections. While ampicillin and sulbactam for injection, USP is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with ampicillin and sulbactam for injection, USP due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to ampicillin and sulbactam for injection, USP should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to ampicillin and sulbactam for injection, USP. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of ampicillin and sulbactam for injection, USP and other antibacterial drugs, ampicillin and sulbactam for injection, USP should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Ampicillin and Sulbactam for Injection is an injectable antibacterial combination consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S,5R,6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1- azabicyclo[3.2.0] heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection, ampicillin sodium/sulbactam sodium parenteral combination, is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8.0 and 10.0. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 1.5 gram vial of Ampicillin and Sulbactam for Injection contains 1 gram ampicillin as the sodium salt plus 0.5 gram sulbactam as the sodium salt. The sodium content is approximately 115 mg (5 mEq) of sodium per vial. Each 3 gram vial of Ampicillin and Sulbactam for Injection contains 2 grams ampicillin as the sodium salt plus 1 gram sulbactam as the sodium salt. The sodium content is approximately 230 mg (10 mEq) of sodium per vial."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>72572-550-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (72572-550-10) / 10 mL in 1 VIAL (72572-550-01) </PackageDescription>
<NDC11Code>72572-0550-10</NDC11Code>
<ProductNDC>72572-550</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pantoprazole Sodium</ProprietaryName>
<NonProprietaryName>Pantoprazole Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20201115</StartMarketingDate>
<EndMarketingDate>20251031</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090296</ApplicationNumber>
<LabelerName>Civica, Inc.</LabelerName>
<SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20201115</StartMarketingDatePackage>
<EndMarketingDatePackage>20251031</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pantoprazole Sodium is indicated for treatment of: 1 gastroesophageal reflux disease (GERD) and a history of erosive esophagitis (EE) for up to 10 days in adults and up to 7 days in pediatric patients 3 months and older., 2 pathological hypersecretory conditions including Zollinger-Ellison (ZE) Syndrome in adults.</IndicationAndUsage>
<Description>The active ingredient in pantoprazole sodium for injection (pantoprazole sodium), a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its molecular formula is C16H14F2N3NaO4S, with a molecular weight of 405.4. The structural formula is. Pantoprazole sodium is a white to off-white crystalline powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. The reconstituted solution of pantoprazole sodium for injection is in the pH range 9.0 to 10.5. Pantoprazole sodium for injection is supplied for intravenous administration as a sterile, freeze-dried powder in a single-dose clear glass vial fitted with a rubber stopper and crimp seal. Each vial contains 40 mg pantoprazole (equivalent to 45.1 mg of pantoprazole sodium), edetate disodium (1 mg), and sodium hydroxide to adjust pH. USP test 2 is used for organic impurities test.</Description>
</NDC>
<NDC>
<NDCCode>11673-550-50</NDCCode>
<PackageDescription>5 BLISTER PACK in 1 CARTON (11673-550-50) / 10 CAPSULE, LIQUID FILLED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>11673-0550-50</NDC11Code>
<ProductNDC>11673-550</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Gas Relief</ProprietaryName>
<ProprietaryNameSuffix>Extra Strength</ProprietaryNameSuffix>
<NonProprietaryName>Simethicone</NonProprietaryName>
<DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130830</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M002</ApplicationNumber>
<LabelerName>Target Corporation</LabelerName>
<SubstanceName>DIMETHICONE, UNSPECIFIED</SubstanceName>
<StrengthNumber>125</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Skin Barrier Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-09-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130830</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>pressure, bloating, and fullness commonly referred to as gas.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>16729-550-10</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (16729-550-10) </PackageDescription>
<NDC11Code>16729-0550-10</NDC11Code>
<ProductNDC>16729-550</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buprenorphine Hydrochloride And Naloxone Hydrochloride Dihydrate</ProprietaryName>
<NonProprietaryName>Buprenorphine Hydrochloride And Naloxone Hydrochloride Dihydrate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>SUBLINGUAL</RouteName>
<StartMarketingDate>20200901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209069</ApplicationNumber>
<LabelerName>Accord Healthcare, Inc</LabelerName>
<SubstanceName>BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE DIHYDRATE</SubstanceName>
<StrengthNumber>8; 2</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2023-05-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buprenorphine and naloxone sublingual tablets are indicated for the maintenance treatment of opioid dependence. Buprenorphine and naloxone sublingual tablets should be used as part of a complete treatment plan that includes counseling and psychosocial support.</IndicationAndUsage>
<Description>Buprenorphine and Naloxone Sublingual Tablets, USP are uncoated white to off-white, round biconvex tablets, debossed with an alpha-numeric imprint identifying the product and strength on one side, and plain on the other. They contain buprenorphine HCl, a partial agonist at the mu-opioid receptor, and naloxone HCl dihydrate, an opioid receptor antagonist, at a ratio of 4:1 (ratio of free bases). They are intended for sublingual administration and are available in two dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone and 8 mg buprenorphine with 2 mg naloxone. Each sublingual tablet also contains citric acid anhydrous, crospovidone, lactose monohydrate, magnesium stearate, mannitol, corn syrup solids, modified food starch, natural lemon flavor, pregelatinized starch (maize), povidone, sodium citrate dihydrate, and sucralose. Chemically, buprenorphine HCl is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy- 6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure. Buprenorphine HCl has the molecular formula C29H41NO4HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemically, naloxone HCl dihydrate is 17-Allyl-4, 5 α -epoxy-3, 14-dihydroxymorphinan-6-one hydrochloride dihydrate. It has the following chemical structure. Naloxone hydrochloride dihydrate has the molecular formula C19H21NO4HCl2H2O and the molecular weight is 399.87. It is a white to slightly off-white powder and is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether.</Description>
</NDC>
<NDC>
<NDCCode>24385-550-10</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (24385-550-10) / 30 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>24385-0550-10</NDC11Code>
<ProductNDC>24385-550</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Good Neighbor Pharmacy Ibuprofen</ProprietaryName>
<NonProprietaryName>Ibuprofen</NonProprietaryName>
<DosageFormName>SUSPENSION/ DROPS</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20041012</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075217</ApplicationNumber>
<LabelerName>Amerisource Bergen</LabelerName>
<SubstanceName>IBUPROFEN</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1.25mL</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20041012</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily: 1 reduces fever, 2 relieves minor aches and pains due to the common cold, flu, sore throat, headaches and toothaches.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>36800-550-50</NDCCode>
<PackageDescription>5 BLISTER PACK in 1 CARTON (36800-550-50) > 10 CAPSULE, LIQUID FILLED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>36800-0550-50</NDC11Code>
<ProductNDC>36800-550</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Gas Relief</ProprietaryName>
<ProprietaryNameSuffix>Extra Strength</ProprietaryNameSuffix>
<NonProprietaryName>Simethicone</NonProprietaryName>
<DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130531</StartMarketingDate>
<EndMarketingDate>20191231</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part347</ApplicationNumber>
<LabelerName>TOP CARE (Topco Associates LLC)</LabelerName>
<SubstanceName>DIMETHICONE</SubstanceName>
<StrengthNumber>125</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20130531</StartMarketingDatePackage>
<EndMarketingDatePackage>20191231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>41163-550-50</NDCCode>
<PackageDescription>5 BLISTER PACK in 1 CARTON (41163-550-50) > 10 CAPSULE, LIQUID FILLED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>41163-0550-50</NDC11Code>
<ProductNDC>41163-550</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Gas Relief</ProprietaryName>
<ProprietaryNameSuffix>Extra Strength</ProprietaryNameSuffix>
<NonProprietaryName>Simethicone</NonProprietaryName>
<DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100708</StartMarketingDate>
<EndMarketingDate>20191231</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part332</ApplicationNumber>
<LabelerName>EQUALINE (SuperValu)</LabelerName>
<SubstanceName>DIMETHICONE</SubstanceName>
<StrengthNumber>125</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20100708</StartMarketingDatePackage>
<EndMarketingDatePackage>20191231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>43063-550-10</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (43063-550-10) </PackageDescription>
<NDC11Code>43063-0550-10</NDC11Code>
<ProductNDC>43063-550</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sildenafil</ProprietaryName>
<NonProprietaryName>Sildenafil Citrate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120927</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA021845</ApplicationNumber>
<LabelerName>PD-Rx Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>SILDENAFIL CITRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-08-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141029</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>43547-550-10</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (43547-550-10) </PackageDescription>
<NDC11Code>43547-0550-10</NDC11Code>
<ProductNDC>43547-550</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride</ProprietaryName>
<NonProprietaryName>Potassium Chloride Extended-release</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190430</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209922</ApplicationNumber>
<LabelerName>Solco Healthcare LLC</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>1500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-02-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190430</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>The potassium chloride extended-release tablets, USP 20 mEq product is an immediately dispersing extended release oral dosage form of potassium chloride containing 1500 mg of microencapsulated potassium chloride, USP equivalent to 20 mEq of potassium in a tablet. The potassium chloride extended-release tablets, USP 15 mEq product is an immediately dispersing extended release oral dosage form of potassium chloride containing 1125 mg of microencapsulated potassium chloride, USP equivalent to 15 mEq of potassium in a tablet. The potassium chloride extended-release tablets, USP 10 mEq product is an immediately dispersing extended release oral dosage form of potassium chloride containing 750 mg of microencapsulated potassium chloride, USP equivalent to 10 mEq of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Potassium chloride is an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Potassium chloride, USP occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Potassium chloride is a tablet formulation (not enteric coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of out-side agitation, potassium chloride tablets begin disintegrating into microencapsulated crystals within seconds and completely disintegrates within 1 minute. The microencapsulated crystals are formulated to provide an extended release of potassium chloride. Inactive Ingredients: croscarmellose sodium, ethylcellulose, microcrystalline cellulose, copovidone and sodium stearyl fumarate. USP sample preparation 2 is used in the assay. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>46122-550-60</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (46122-550-60) > 10 TABLET, CHEWABLE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>46122-0550-60</NDC11Code>
<ProductNDC>46122-550</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Childrens Loratadine</ProprietaryName>
<NonProprietaryName>Loratadine</NonProprietaryName>
<DosageFormName>TABLET, CHEWABLE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210088</ApplicationNumber>
<LabelerName>Amerisource Bergen</LabelerName>
<SubstanceName>LORATADINE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2026-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose, 2 sneezing, 3 itchy, watery eyes, 4 itching of the nose or throat.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>49035-550-20</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (49035-550-20) > 10 CAPSULE, LIQUID FILLED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>49035-0550-20</NDC11Code>
<ProductNDC>49035-550</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Gas Relief</ProprietaryName>
<ProprietaryNameSuffix>Extra Strength</ProprietaryNameSuffix>
<NonProprietaryName>Simethicone</NonProprietaryName>
<DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100706</StartMarketingDate>
<EndMarketingDate>20201231</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part332</ApplicationNumber>
<LabelerName>EQUATE (Wal-Mart Stores, Inc.)</LabelerName>
<SubstanceName>DIMETHICONE</SubstanceName>
<StrengthNumber>125</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20100706</StartMarketingDatePackage>
<EndMarketingDatePackage>20201231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>49349-550-08</NDCCode>
<PackageDescription>10 TABLET in 1 BLISTER PACK (49349-550-08)</PackageDescription>
<NDC11Code>49349-0550-08</NDC11Code>
<ProductNDC>49349-550</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisone</ProprietaryName>
<NonProprietaryName>Prednisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130726</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA083677</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>PREDNISONE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>50458-550-10</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BOX, UNIT-DOSE (50458-550-10) > 10 TABLET, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>50458-0550-10</NDC11Code>
<ProductNDC>50458-550</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Invega</ProprietaryName>
<NonProprietaryName>Paliperidone</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20061219</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021999</ApplicationNumber>
<LabelerName>Janssen Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>PALIPERIDONE</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-08-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20061219</StartMarketingDatePackage>
<EndMarketingDatePackage>20200731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>55118-550-10</NDCCode>
<PackageDescription>1 L in 1 BOTTLE, PLASTIC (55118-550-10)</PackageDescription>
<NDC11Code>55118-0550-10</NDC11Code>
<ProductNDC>55118-550</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Kleenex Antibacterial Skin Cleanser Fragrance Free</ProprietaryName>
<NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20120301</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333E</ApplicationNumber>
<LabelerName>Kimberly-Clark Corporation</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>1.3</StrengthNumber>
<StrengthUnit>g/L</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>For handwashing to decrease bacteria on the skin.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>55312-550-50</NDCCode>
<PackageDescription>5 BLISTER PACK in 1 CARTON (55312-550-50) > 10 CAPSULE, LIQUID FILLED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55312-0550-50</NDC11Code>
<ProductNDC>55312-550</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Antigas</ProprietaryName>
<ProprietaryNameSuffix>Extra Strength</ProprietaryNameSuffix>
<NonProprietaryName>Simethicone</NonProprietaryName>
<DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100313</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part332</ApplicationNumber>
<LabelerName>Western Family Foods, Inc.</LabelerName>
<SubstanceName>DIMETHICONE</SubstanceName>
<StrengthNumber>125</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>55319-550-20</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (55319-550-20) > 10 CAPSULE, LIQUID FILLED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55319-0550-20</NDC11Code>
<ProductNDC>55319-550</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Gas Relief</ProprietaryName>
<ProprietaryNameSuffix>Extra Strength</ProprietaryNameSuffix>
<NonProprietaryName>Simethicone</NonProprietaryName>
<DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130630</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part347</ApplicationNumber>
<LabelerName>Family Dollar (FAMILY WELLNESS)</LabelerName>
<SubstanceName>DIMETHICONE</SubstanceName>
<StrengthNumber>125</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-12-07</LastUpdate>
</NDC>
<NDC>
<NDCCode>58411-550-10</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (58411-550-10) / 35 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>58411-0550-10</NDC11Code>
<ProductNDC>58411-550</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cle De Peau Beaute Radiant Fluid Foundation</ProprietaryName>
<ProprietaryNameSuffix>B20</ProprietaryNameSuffix>
<NonProprietaryName>Titanium Dioxide</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200701</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>SHISEIDO AMERICAS CORPORATION</LabelerName>
<SubstanceName>TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>2.72118</StrengthNumber>
<StrengthUnit>g/35mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-01-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>60923-550-59</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (60923-550-59) * 10 mL in 1 VIAL, SINGLE-USE (60923-562-01) * 59 POUCH in 1 BOX / 1 SWAB in 1 POUCH</PackageDescription>
<NDC11Code>60923-0550-59</NDC11Code>
<ProductNDC>60923-550</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Elevidys</ProprietaryName>
<NonProprietaryName>Delandistrogene Moxeparvovec-rokl</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230622</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125781</ApplicationNumber>
<LabelerName>Sarepta Therapeutics, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-08-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230622</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ELEVIDYS is indicated for the treatment of patients 4 years of age and older with Duchenne muscular dystrophy (DMD), who are ambulatory and have a confirmed mutation in the DMD gene [see Clinical Pharmacology (12.2), Clinical Studies (14)].</IndicationAndUsage>
<Description>ELEVIDYS (delandistrogene moxeparvovec-rokl) is a recombinant gene therapy designed to deliver the gene encoding the ELEVIDYS micro-dystrophin protein. ELEVIDYS is a non-replicating, recombinant, adeno-associated virus serotype rh74 (AAVrh74) based vector containing the ELEVIDYS micro-dystrophin transgene under the control of the MHCK7 promoter. The genome within the ELEVIDYS AAVrh74 vector contains no viral genes and consequently is incapable of replication or reversion to a replicating form. The micro-dystrophin protein expressed by ELEVIDYS is a shortened version (138 kDa, compared to 427 kDa size of dystrophin expressed in normal muscle cells) that contains selected domains of dystrophin expressed in normal muscle cells. ELEVIDYS is a preservative-free, sterile, clear, colorless liquid that may have some opalescence and may contain white to off-white particles. ELEVIDYS is a suspension for intravenous infusion with a nominal concentration of 1.33 ×1013 vg/mL and supplied in a single-dose 10 mL vial. Each vial contains an extractable volume of 10 mL and the following excipients: 200mM sodium chloride, 13 mM tromethamine HCl, 7 mM tromethamine, 1mM magnesium chloride, 0.001% poloxamer 188, with a pH of 8.0 ± 0.3.</Description>
</NDC>
<NDC>
<NDCCode>62157-550-01</NDCCode>
<PackageDescription>10 g in 1 JAR (62157-550-01)</PackageDescription>
<NDC11Code>62157-0550-01</NDC11Code>
<ProductNDC>62157-550</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Anastrozole</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20180406</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR ANIMAL DRUG COMPOUNDING</MarketingCategoryName>
<LabelerName>AX Pharmaceutical Corp</LabelerName>
<SubstanceName>ANASTROZOLE</SubstanceName>
<StrengthNumber>9.9</StrengthNumber>
<StrengthUnit>g/10g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>63304-550-10</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (63304-550-10)</PackageDescription>
<NDC11Code>63304-0550-10</NDC11Code>
<ProductNDC>63304-550</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Quinapril</ProprietaryName>
<NonProprietaryName>Quinapril</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070924</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076607</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>QUINAPRIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Quinapril tablets, USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with quinapril tablets, USP. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Quinapril tablets, USP may be used alone or in combination with thiazide diuretics. Heart Failure. Quinapril tablets, USP are indicated in the management of heart failure as adjunctive therapy when added to conventional therapy including diuretics and/or digitalis. In using quinapril tablets, USP, consideration should be given to the fact that another angiotensin-converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease. Available data are insufficient to show that quinapril does not have a similar risk (see WARNINGS).</IndicationAndUsage>
<Description>Quinapril hydrochloride is the hydrochloride salt of quinapril, the ethyl ester of a non-sulfhydryl, angiotensin-converting enzyme (ACE) inhibitor, quinaprilat. Quinapril hydrochloride is chemically described as [3S-[2[R*(R*)],3R*]]-2-[2-[[1-(ethoxycarbonyl)-3-phenylpropyl]amino]-1-oxopropyl]-1,2,3,4-tetrahydro-3-isoquinolinecarboxylic acid, monohydrochloride. Its molecular formula is C25H30N2O5HCl and its structural formula is. Quinapril hydrochloride, USP is a white to off-white powder with a pink cast at times that is freely soluble in aqueous solvents (water). Quinapril tablets, USP contain 5 mg, 10 mg, 20 mg, or 40 mg of quinapril hydrochloride, USP for oral administration. Each tablet also contains crospovidone, lecithin, magnesium carbonate, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, povidone, talc, titanium dioxide and xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>63824-550-20</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (63824-550-20) > 10 TABLET, COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>63824-0550-20</NDC11Code>
<ProductNDC>63824-550</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Mucinex Fast-max</ProprietaryName>
<ProprietaryNameSuffix>Night Time Cold And Flu</ProprietaryNameSuffix>
<NonProprietaryName>Acetaminophen, Diphenhydramine Hydrochloride, And Phenylephrine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130430</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>Reckitt Benckiser LLC</LabelerName>
<SubstanceName>ACETAMINOPHEN; DIPHENHYDRAMINE HYDROCHLORIDE; PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>325; 25; 5</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>68083-550-10</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (68083-550-10) > 1 mL in 1 VIAL, SINGLE-DOSE (68083-550-01) </PackageDescription>
<NDC11Code>68083-0550-10</NDC11Code>
<ProductNDC>68083-550</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Desmopressin Acetate</ProprietaryName>
<NonProprietaryName>Desmopressin Acetate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20221116</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216922</ApplicationNumber>
<LabelerName>Gland Pharma Limited</LabelerName>
<SubstanceName>DESMOPRESSIN ACETATE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Factor VIII Activator [EPC], Increased Coagulation Factor VIII Activity [PE], Increased Coagulation Factor VIII Concentration [PE], Vasopressin Analog [EPC], Vasopressins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-11-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221116</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Desmopressin acetate injection is a vasopressin analog used for: 1 Central Diabetes Insipidus - as antidiuretic replacement therapy in the management of central (cranial) diabetes insipidus and for the management of the temporary polyuria and polydipsia following head trauma or surgery in the pituitary region. (1.1), 2 Hemophilia A- for patients with factor VIII coagulant activity levels greater than 5% to maintain hemostasis during surgical procedures and postoperatively or reduce bleeding with episodes of spontaneous or traumatic injuries such as hemarthroses, intramuscular hematomas, or mucosal bleeding. (1.2), 3 von Willebrand’s disease (Type I) - for patients with mild to moderate disease with factor VIII levels greater than 5% to maintain hemostasis during surgical procedures or traumatic injuries such as hemarthroses, intramuscular hematomas, or mucosal bleeding. (1.3).</IndicationAndUsage>
<Description>Desmopressin acetate injection, USP is a synthetic vasopressin analog for intravenous or subcutaneous use. It is chemically defined as follows:Mol. Wt. 1183.34Empirical Formula: C46H64N14O12S2C2H4O23H2O. 1-(3-mercaptopropionic acid)-8-D-arginine vasopressin monoacetate (salt) trihydrate.Desmopressin acetate injection, USP is a sterile solution in a 1 mL single-dose vial: Each mL contains 4 mcg of desmopressin acetate, USP which is equivalent to 3.6 mcg of desmopressin free base. The inactive ingredients are sodium chloride USP, hydrochloric acid, NF and water for injection, USP. Sodium chloride is used to adjust tonicity. Hydrochloric acid is used to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>68382-550-10</NDCCode>
<PackageDescription>1000 TABLET, EXTENDED RELEASE in 1 BOTTLE (68382-550-10) </PackageDescription>
<NDC11Code>68382-0550-10</NDC11Code>
<ProductNDC>68382-550</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Minocycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Minocycline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250612</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203553</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>MINOCYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>55</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Prothrombin Activity [PE], Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250612</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Minocycline hydrochloride extended-release tablets are indicated to treat inflammatory lesions of non-nodular moderate to severe acne vulgaris in patients 12 years of age and older. Limitations of Use: 1 Minocycline hydrochloride extended-release tablets did not demonstrate any effect on non-inflammatory acne lesions., 2 This formulation of minocycline has not been evaluated in the treatment of infections [see Clinical Studies (14)]., 3 To reduce the development of drug-resistant bacteria as well as to maintain the effectiveness of other antibacterial drugs, use minocycline hydrochloride extended-release tablets only as indicated [see Warnings and Precautions (5.12)].</IndicationAndUsage>
<Description>Minocycline hydrochloride, a semi synthetic derivative of tetracycline, is [4S-(4α,4aα,5aα,12aα)]-4,7-Bis(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,10, 12,12a-tetrahydroxy-1,11-dioxo-2-naphthacenecarboxamide mono hydrochloride. The structural formula is represented below. C23H27N3O7HCl M. W. 493.95. Each minocycline hydrochloride extended-release tablet, USP intended for oral administration contains minocycline hydrochloride equivalent to 45 mg, 55 mg, 65 mg, 80 mg, 90 mg, 105 mg, 115 mg or 135 mg of minocycline. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol (55 mg, 65 mg, 80 mg, 90 mg, 105 mg, 115 mg and 135 mg only), titanium dioxide and triacetin. Additionally, the 45 mg tablets contain ferric oxide black and ferric oxide yellow; the 55 mg tablets contain ferric oxide red and ferric oxide yellow; the 65 mg tablets contain FD & C blue #2 aluminum lake; the 80 mg tablets contain FD & C blue #2 aluminum lake and FD & C red #40 aluminum lake; the 90 mg tablets contain D & C yellow #10 aluminum lake, ferric oxide red and ferric oxide yellow; the 105 mg tablets contain FD & C blue #2 aluminum lake and FD & C red #40 aluminum lake; the 115 mg tablets contain FD & C blue #2 aluminum lake and ferric oxide yellow; the 135 mg tablets contain D & C red #27 aluminum lake, D & C yellow #10 aluminum lake and FD & C blue #2 aluminum lake. USP dissolution test-8 used. USP organic impurities procedure pending.</Description>
</NDC>
<NDC>
<NDCCode>68382-550-30</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (68382-550-30) / 10 TABLET, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>68382-0550-30</NDC11Code>
<ProductNDC>68382-550</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Minocycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Minocycline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250612</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203553</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>MINOCYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>55</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Prothrombin Activity [PE], Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250612</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Minocycline hydrochloride extended-release tablets are indicated to treat inflammatory lesions of non-nodular moderate to severe acne vulgaris in patients 12 years of age and older. Limitations of Use: 1 Minocycline hydrochloride extended-release tablets did not demonstrate any effect on non-inflammatory acne lesions., 2 This formulation of minocycline has not been evaluated in the treatment of infections [see Clinical Studies (14)]., 3 To reduce the development of drug-resistant bacteria as well as to maintain the effectiveness of other antibacterial drugs, use minocycline hydrochloride extended-release tablets only as indicated [see Warnings and Precautions (5.12)].</IndicationAndUsage>
<Description>Minocycline hydrochloride, a semi synthetic derivative of tetracycline, is [4S-(4α,4aα,5aα,12aα)]-4,7-Bis(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,10, 12,12a-tetrahydroxy-1,11-dioxo-2-naphthacenecarboxamide mono hydrochloride. The structural formula is represented below. C23H27N3O7HCl M. W. 493.95. Each minocycline hydrochloride extended-release tablet, USP intended for oral administration contains minocycline hydrochloride equivalent to 45 mg, 55 mg, 65 mg, 80 mg, 90 mg, 105 mg, 115 mg or 135 mg of minocycline. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol (55 mg, 65 mg, 80 mg, 90 mg, 105 mg, 115 mg and 135 mg only), titanium dioxide and triacetin. Additionally, the 45 mg tablets contain ferric oxide black and ferric oxide yellow; the 55 mg tablets contain ferric oxide red and ferric oxide yellow; the 65 mg tablets contain FD & C blue #2 aluminum lake; the 80 mg tablets contain FD & C blue #2 aluminum lake and FD & C red #40 aluminum lake; the 90 mg tablets contain D & C yellow #10 aluminum lake, ferric oxide red and ferric oxide yellow; the 105 mg tablets contain FD & C blue #2 aluminum lake and FD & C red #40 aluminum lake; the 115 mg tablets contain FD & C blue #2 aluminum lake and ferric oxide yellow; the 135 mg tablets contain D & C red #27 aluminum lake, D & C yellow #10 aluminum lake and FD & C blue #2 aluminum lake. USP dissolution test-8 used. USP organic impurities procedure pending.</Description>
</NDC>
<NDC>
<NDCCode>71052-550-10</NDCCode>
<PackageDescription>100 g in 1 CONTAINER (71052-550-10) </PackageDescription>
<NDC11Code>71052-0550-10</NDC11Code>
<ProductNDC>71052-550</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Indomethacin</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20190725</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>DARMERICA, LLC</LabelerName>
<SubstanceName>INDOMETHACIN</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>g/1000g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>05-MAR-20</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>71919-550-10</NDCCode>
<PackageDescription>100 mL in 1 BOTTLE, GLASS (71919-550-10) </PackageDescription>
<NDC11Code>71919-0550-10</NDC11Code>
<ProductNDC>71919-550</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Podophyllinum</ProprietaryName>
<NonProprietaryName>Podophyllum Resin</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100324</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>PODOPHYLLUM RESIN</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-03-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100324</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>72789-550-10</NDCCode>
<PackageDescription>10 CAPSULE in 1 BOTTLE, PLASTIC (72789-550-10) </PackageDescription>
<NDC11Code>72789-0550-10</NDC11Code>
<ProductNDC>72789-550</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefdinir</ProprietaryName>
<NonProprietaryName>Cefdinir</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080107</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065434</ApplicationNumber>
<LabelerName>PD-Rx Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>CEFDINIR</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of cefdinir and other antibacterial drugs, cefdinir should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Cefdinir capsules, USP are indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the conditions listed below.</IndicationAndUsage>
<Description>Cefdinir capsules, USP contain the active ingredient cefdinir, an extended-spectrum, semisynthetic cephalosporin, for oral administration. Chemically, cefdinir is [6R-[6α, 7β (Z)]]-7-[[(2-amino-4-thiazolyl)(hydroxyimino)acetyl]amino]-3-ethenyl-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid. Cefdinir USP is a white to slightly brownish-yellow solid. It is slightly soluble in dilute hydrochloric acid and sparingly soluble in 0.1 M pH 7.0 phosphate buffer. The molecular formula is C 14H 13N 5O 5S 2and the molecular weight is 395.42. Cefdinir has the structural formula shown below:. Cefdinir capsules, USP contain 300 mg cefdinir USP and the following inactive ingredients: carboxymethylcellulose calcium, colloidal silicon dioxide and magnesium stearate. The empty hard gelatin capsule shells contain FD&C Blue #1, D&C Red #28, titanium dioxide, gelatin and sodium lauryl sulphate. The capsules are printed with edible ink containing black iron oxide and shellac.</Description>
</NDC>
<NDC>
<NDCCode>72572-016-10</NDCCode>
<PackageDescription>10 VIAL, GLASS in 1 CARTON (72572-016-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, GLASS (72572-016-01) </PackageDescription>
<NDC11Code>72572-0016-10</NDC11Code>
<ProductNDC>72572-016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin</ProprietaryName>
<NonProprietaryName>Ampicillin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20201201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062719</ApplicationNumber>
<LabelerName>Civica, Inc.</LabelerName>
<SubstanceName>AMPICILLIN SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infections caused by Streptococcus pneumoniae, Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli, Group B streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.</IndicationAndUsage>
<Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2α,5α,6ß(S*)]]-6[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.</Description>
</NDC>
<NDC>
<NDCCode>72572-017-10</NDCCode>
<PackageDescription>10 VIAL, GLASS in 1 CARTON (72572-017-10) / 2 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, GLASS (72572-017-01) </PackageDescription>
<NDC11Code>72572-0017-10</NDC11Code>
<ProductNDC>72572-017</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin</ProprietaryName>
<NonProprietaryName>Ampicillin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20201201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062797</ApplicationNumber>
<LabelerName>Civica, Inc.</LabelerName>
<SubstanceName>AMPICILLIN SODIUM</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infections caused by Streptococcus pneumoniae, Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli, Group B streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.</IndicationAndUsage>
<Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2α,5α,6ß(S*)]]-6[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.</Description>
</NDC>
<NDC>
<NDCCode>72572-021-10</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (72572-021-10) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (72572-021-01) </PackageDescription>
<NDC11Code>72572-0021-10</NDC11Code>
<ProductNDC>72572-021</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin And Sulbactam</ProprietaryName>
<NonProprietaryName>Ampicillin And Sulbactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20220110</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090579</ApplicationNumber>
<LabelerName>Civica, Inc.</LabelerName>
<SubstanceName>AMPICILLIN SODIUM; SULBACTAM SODIUM</SubstanceName>
<StrengthNumber>1; .5</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-03-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220110</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin and sulbactam for injection, USP is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli*, Klebsiella spp.* (including K. pneumoniae*), Proteus mirabilis*, Bacteroides fragilis*, Enterobacter spp.*, and Acinetobacter calcoaceticus*. NOTE: For information on use in pediatric patients (see PRECAUTIONS-Pediatric Use and CLINICAL STUDIES sections). Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae*), Bacteroides spp. (including B. fragilis), and Enterobacter spp.*. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli*, and Bacteroides spp.* (including B. fragilis*). * Efficacy for this organism in this organ system was studied in fewer than 10 infections. While ampicillin and sulbactam for injection, USP is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with ampicillin and sulbactam for injection, USP due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to ampicillin and sulbactam for injection, USP should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to ampicillin and sulbactam for injection, USP. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of ampicillin and sulbactam for injection, USP and other antibacterial drugs, ampicillin and sulbactam for injection, USP should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Ampicillin and Sulbactam for Injection is an injectable antibacterial combination consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S,5R,6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1- azabicyclo[3.2.0] heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection, ampicillin sodium/sulbactam sodium parenteral combination, is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8.0 and 10.0. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 1.5 gram vial of Ampicillin and Sulbactam for Injection contains 1 gram ampicillin as the sodium salt plus 0.5 gram sulbactam as the sodium salt. The sodium content is approximately 115 mg (5 mEq) of sodium per vial. Each 3 gram vial of Ampicillin and Sulbactam for Injection contains 2 grams ampicillin as the sodium salt plus 1 gram sulbactam as the sodium salt. The sodium content is approximately 230 mg (10 mEq) of sodium per vial.</Description>
</NDC>
<NDC>
<NDCCode>72572-022-10</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (72572-022-10) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (72572-022-01) </PackageDescription>
<NDC11Code>72572-0022-10</NDC11Code>
<ProductNDC>72572-022</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin And Sulbactam</ProprietaryName>
<NonProprietaryName>Ampicillin And Sulbactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20220110</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090579</ApplicationNumber>
<LabelerName>Civica, Inc.</LabelerName>
<SubstanceName>AMPICILLIN SODIUM; SULBACTAM SODIUM</SubstanceName>
<StrengthNumber>2; 1</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-03-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220110</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin and sulbactam for injection, USP is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli*, Klebsiella spp.* (including K. pneumoniae*), Proteus mirabilis*, Bacteroides fragilis*, Enterobacter spp.*, and Acinetobacter calcoaceticus*. NOTE: For information on use in pediatric patients (see PRECAUTIONS-Pediatric Use and CLINICAL STUDIES sections). Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae*), Bacteroides spp. (including B. fragilis), and Enterobacter spp.*. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli*, and Bacteroides spp.* (including B. fragilis*). * Efficacy for this organism in this organ system was studied in fewer than 10 infections. While ampicillin and sulbactam for injection, USP is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with ampicillin and sulbactam for injection, USP due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to ampicillin and sulbactam for injection, USP should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to ampicillin and sulbactam for injection, USP. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of ampicillin and sulbactam for injection, USP and other antibacterial drugs, ampicillin and sulbactam for injection, USP should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Ampicillin and Sulbactam for Injection is an injectable antibacterial combination consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S,5R,6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1- azabicyclo[3.2.0] heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and Sulbactam for Injection, ampicillin sodium/sulbactam sodium parenteral combination, is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8.0 and 10.0. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 1.5 gram vial of Ampicillin and Sulbactam for Injection contains 1 gram ampicillin as the sodium salt plus 0.5 gram sulbactam as the sodium salt. The sodium content is approximately 115 mg (5 mEq) of sodium per vial. Each 3 gram vial of Ampicillin and Sulbactam for Injection contains 2 grams ampicillin as the sodium salt plus 1 gram sulbactam as the sodium salt. The sodium content is approximately 230 mg (10 mEq) of sodium per vial.</Description>
</NDC>
</NDCList>