{
"NDC": [
{
"NDCCode": "72611-760-10",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (72611-760-10) / 10 mL in 1 VIAL, SINGLE-DOSE (72611-760-01) ",
"NDC11Code": "72611-0760-10",
"ProductNDC": "72611-760",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tranexamic Acid",
"NonProprietaryName": "Tranexamic Acid",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207239",
"LabelerName": "Almaject, Inc.",
"SubstanceName": "TRANEXAMIC ACID",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antifibrinolytic Agent [EPC], Decreased Fibrinolysis [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-10-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20210301",
"SamplePackage": "N",
"IndicationAndUsage": "Tranexamic acid injection is indicated in patients with hemophilia for short-term use (2 to 8 days) to reduce or prevent hemorrhage and reduce the need for replacement therapy during and following tooth extraction.",
"Description": "Tranexamic acid, USP is trans-4-(aminomethyl)cyclohexanecarboxylic acid, an antifibrinolytic agent. Tranexamic acid, USP is a white crystalline powder. The structural formula is. Empirical Formula: C8H15NO2 Molecular Weight: 157.2. Each mL of the sterile solution for intravenous injection contains 100 mg tranexamic acid, USP and Water for Injection to 1 mL. The aqueous solution for injection has a pH of 6.5 to 8.0."
},
{
"NDCCode": "72611-700-01",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (72611-700-01) / 10.8 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "72611-0700-01",
"ProductNDC": "72611-700",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Caspofungin Acetate",
"NonProprietaryName": "Caspofungin Acetate",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200331",
"EndMarketingDate": "20251101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207092",
"LabelerName": "Almaject, Inc.",
"SubstanceName": "CASPOFUNGIN ACETATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Echinocandin Antifungal [EPC], Lipopeptides [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200331",
"EndMarketingDatePackage": "20251101",
"SamplePackage": "N",
"IndicationAndUsage": "Caspofungin acetate for injection is an echinocandin antifungal indicated in adults and pediatric patients (3 months of age and older) for: : 1 Empirical therapy for presumed fungal infections in febrile, neutropenic patients. (1) , 2 Treatment of candidemia and the following Candida infections: intra-abdominal abscesses, peritonitis and pleural space infections. (1) , 3 Treatment of esophageal candidiasis. (1) , 4 Treatment of invasive aspergillosis in patients who are refractory to or intolerant of other therapies. (1) .",
"Description": "Caspofungin acetate for injection is a sterile, lyophilized product for intravenous (IV) infusion that contains a semisynthetic lipopeptide (echinocandin) compound synthesized from a fermentation product of Glarea lozoyensis. Caspofungin acetate is an echinocandin antifungal that inhibits the synthesis of β (1,3)-D-glucan, an integral component of the fungal cell wall. Caspofungin acetate is 1-[(4R,5S)-5-[(2-aminoethyl)amino]-N2-(10,12-dimethyl-1-oxotetradecyl)-4-hydroxy-L-ornithine]-5-[(3R)-3-hydroxy-L-ornithine] pneumocandin B0 diacetate (salt). Caspofungin acetate for injection 50 mg vial contains 50 mg of caspofungin equivalent to 55.5 mg of caspofungin acetate. Caspofungin acetate for injection 50 mg vial also contains 39 mg sucrose, 26 mg mannitol, 2 mg glacial acetic acid added as a buffering agent, and sodium hydroxide added as a pH adjuster ingredient. Caspofungin acetate for injection 70 mg vial contains 70 mg of caspofungin equivalent to 77.7 mg of caspofungin acetate. Caspofungin acetate for injection 70 mg vial also contains 54 mg sucrose, 36 mg mannitol, 2.7 mg glacial acetic acid added as a buffering agent, and sodium hydroxide added as a pH adjuster ingredient. Caspofungin acetate is a hygroscopic, white to off-white powder. It is freely soluble in water and methanol, and slightly soluble in ethanol. The pH of a saturated aqueous solution of caspofungin acetate is approximately 6.6. The empirical formula is C52H88N10O152C2H4O2 and the formula weight is 1213.42. The structural formula is:."
},
{
"NDCCode": "72611-702-01",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (72611-702-01) / 10.8 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "72611-0702-01",
"ProductNDC": "72611-702",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Caspofungin Acetate",
"NonProprietaryName": "Caspofungin Acetate",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200331",
"EndMarketingDate": "20241101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207092",
"LabelerName": "Almaject, Inc.",
"SubstanceName": "CASPOFUNGIN ACETATE",
"StrengthNumber": "7",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Echinocandin Antifungal [EPC], Lipopeptides [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-11-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200331",
"EndMarketingDatePackage": "20241101",
"SamplePackage": "N",
"IndicationAndUsage": "Caspofungin acetate for injection is an echinocandin antifungal indicated in adults and pediatric patients (3 months of age and older) for: : 1 Empirical therapy for presumed fungal infections in febrile, neutropenic patients. (1) , 2 Treatment of candidemia and the following Candida infections: intra-abdominal abscesses, peritonitis and pleural space infections. (1) , 3 Treatment of esophageal candidiasis. (1) , 4 Treatment of invasive aspergillosis in patients who are refractory to or intolerant of other therapies. (1) .",
"Description": "Caspofungin acetate for injection is a sterile, lyophilized product for intravenous (IV) infusion that contains a semisynthetic lipopeptide (echinocandin) compound synthesized from a fermentation product of Glarea lozoyensis. Caspofungin acetate is an echinocandin antifungal that inhibits the synthesis of β (1,3)-D-glucan, an integral component of the fungal cell wall. Caspofungin acetate is 1-[(4R,5S)-5-[(2-aminoethyl)amino]-N2-(10,12-dimethyl-1-oxotetradecyl)-4-hydroxy-L-ornithine]-5-[(3R)-3-hydroxy-L-ornithine] pneumocandin B0 diacetate (salt). Caspofungin acetate for injection 50 mg vial contains 50 mg of caspofungin equivalent to 55.5 mg of caspofungin acetate. Caspofungin acetate for injection 50 mg vial also contains 39 mg sucrose, 26 mg mannitol, 2 mg glacial acetic acid added as a buffering agent, and sodium hydroxide added as a pH adjuster ingredient. Caspofungin acetate for injection 70 mg vial contains 70 mg of caspofungin equivalent to 77.7 mg of caspofungin acetate. Caspofungin acetate for injection 70 mg vial also contains 54 mg sucrose, 36 mg mannitol, 2.7 mg glacial acetic acid added as a buffering agent, and sodium hydroxide added as a pH adjuster ingredient. Caspofungin acetate is a hygroscopic, white to off-white powder. It is freely soluble in water and methanol, and slightly soluble in ethanol. The pH of a saturated aqueous solution of caspofungin acetate is approximately 6.6. The empirical formula is C52H88N10O152C2H4O2 and the formula weight is 1213.42. The structural formula is:."
},
{
"NDCCode": "72611-740-10",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (72611-740-10) / 5 mL in 1 VIAL, SINGLE-DOSE (72611-740-01) ",
"NDC11Code": "72611-0740-10",
"ProductNDC": "72611-740",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoprolol Tartrate",
"NonProprietaryName": "Metoprolol Tartrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200331",
"EndMarketingDate": "20261101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204205",
"LabelerName": "Almaject, Inc.",
"SubstanceName": "METOPROLOL TARTRATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2024-10-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200331",
"EndMarketingDatePackage": "20261101",
"SamplePackage": "N",
"IndicationAndUsage": "Metoprolol tartrate injection is indicated in the treatment of definite or suspected acute myocardial infarction in hemodynamically stable patients to reduce cardiovascular mortality when used in conjunction with oral metoprolol maintenance therapy.",
"Description": "Metoprolol tartrate USP, is a selective beta1-adrenoreceptor blocking agent, available in 5 mL vials for intravenous administration. Each vial contains a sterile solution of metoprolol tartrate USP, 5 mg, and sodium chloride USP, 45 mg, and water for injection USP. Metoprolol tartrate USP is (±)-1-(Isopropylamino)-3-[p-(2-methoxyethyl)phenoxy]-2-propanol L- (+)-tartrate (2:1) salt, and its structural formula is. Metoprolol tartrate USP is a white, practically odorless, crystalline powder with a molecular weight of 684.82. It is very soluble in water; freely soluble in methylene chloride, in chloroform, and in alcohol; slightly soluble in acetone; and insoluble in ether."
},
{
"NDCCode": "72611-749-10",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 CARTON (72611-749-10) / 10 mL in 1 VIAL, MULTI-DOSE (72611-749-01) ",
"NDC11Code": "72611-0749-10",
"ProductNDC": "72611-749",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Midazolam",
"NonProprietaryName": "Midazolam",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20200414",
"EndMarketingDate": "20260401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090850",
"LabelerName": "Almaject, Inc.",
"SubstanceName": "MIDAZOLAM HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2026-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200414",
"EndMarketingDatePackage": "20260401",
"SamplePackage": "N",
"IndicationAndUsage": "Midazolam Injection is indicated: : 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia;, 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants;, 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia);, 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting. .",
"Description": "Midazolam hydrochloride is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 5 mg midazolam compounded with 0.8% sodium chloride and 0.01% edetate disodium, with 1% benzyl alcohol as preservative; the pH is adjusted to 2.9 to 3.5 with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white or yellowish crystalline powder, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the empirical formula C18H13ClFN3HCl, a calculated molecular weight of 362.25 and the following structural formula:. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form."
},
{
"NDCCode": "72611-756-10",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 CARTON (72611-756-10) / 5 mL in 1 VIAL, MULTI-DOSE (72611-756-01) ",
"NDC11Code": "72611-0756-10",
"ProductNDC": "72611-756",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rocuronium Bromide",
"NonProprietaryName": "Rocuronium Bromide",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200327",
"EndMarketingDate": "20250301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205656",
"LabelerName": "Almaject, Inc.",
"SubstanceName": "ROCURONIUM BROMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200327",
"EndMarketingDatePackage": "20250301",
"SamplePackage": "N",
"IndicationAndUsage": "Rocuronium bromide injection is indicated for inpatients and outpatients as an adjunct to general anesthesia to facilitate both rapid sequence and routine tracheal intubation, and to provide skeletal muscle relaxation during surgery or mechanical ventilation.",
"Description": "Rocuronium bromide injection is a nondepolarizing neuromuscular blocking agent with a rapid to intermediate onset depending on dose and intermediate duration. Rocuronium bromide is chemically designated as 1-[17β-(acetyloxy)-3α-hydroxy-2β-(4-morpholinyl)-5α-androstan-16β-yl]-1-(2- propenyl)pyrrolidinium bromide. The structural formula is. The chemical formula is C32H53BrN2O4 with a molecular weight of 609.70. The partition coefficient of rocuronium bromide in n-octanol/water is 0.5 at 20°C. Rocuronium bromide is supplied as a sterile, nonpyrogenic, isotonic solution that is clear, colorless to yellow/orange, for intravenous injection only. Each mL contains 10 mg rocuronium bromide and 2 mg sodium acetate. The aqueous solution is adjusted to isotonicity with sodium chloride and to a pH of 4 with acetic acid and/or sodium hydroxide."
},
{
"NDCCode": "72611-757-10",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 CARTON (72611-757-10) / 10 mL in 1 VIAL, MULTI-DOSE (72611-757-01) ",
"NDC11Code": "72611-0757-10",
"ProductNDC": "72611-757",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rocuronium Bromide",
"NonProprietaryName": "Rocuronium Bromide",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200327",
"EndMarketingDate": "20250301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205656",
"LabelerName": "Almaject, Inc.",
"SubstanceName": "ROCURONIUM BROMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200327",
"EndMarketingDatePackage": "20250301",
"SamplePackage": "N",
"IndicationAndUsage": "Rocuronium bromide injection is indicated for inpatients and outpatients as an adjunct to general anesthesia to facilitate both rapid sequence and routine tracheal intubation, and to provide skeletal muscle relaxation during surgery or mechanical ventilation.",
"Description": "Rocuronium bromide injection is a nondepolarizing neuromuscular blocking agent with a rapid to intermediate onset depending on dose and intermediate duration. Rocuronium bromide is chemically designated as 1-[17β-(acetyloxy)-3α-hydroxy-2β-(4-morpholinyl)-5α-androstan-16β-yl]-1-(2- propenyl)pyrrolidinium bromide. The structural formula is. The chemical formula is C32H53BrN2O4 with a molecular weight of 609.70. The partition coefficient of rocuronium bromide in n-octanol/water is 0.5 at 20°C. Rocuronium bromide is supplied as a sterile, nonpyrogenic, isotonic solution that is clear, colorless to yellow/orange, for intravenous injection only. Each mL contains 10 mg rocuronium bromide and 2 mg sodium acetate. The aqueous solution is adjusted to isotonicity with sodium chloride and to a pH of 4 with acetic acid and/or sodium hydroxide."
},
{
"NDCCode": "72611-761-10",
"PackageDescription": "10 VIAL in 1 CARTON (72611-761-10) / 10 mL in 1 VIAL (72611-761-01) ",
"NDC11Code": "72611-0761-10",
"ProductNDC": "72611-761",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200508",
"EndMarketingDate": "20250201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205694",
"LabelerName": "Almaject, Inc.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-02-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200508",
"EndMarketingDatePackage": "20250201",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin hydrochloride for injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin hydrochloride for injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin hydrochloride for injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin hydrochloride for injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin hydrochloride for injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin hydrochloride for injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of vancomycin hydrochloride for injection, USP and other antibacterial drugs, vancomycin hydrochloride for injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
"Description": "Vancomycin hydrochloride for injection, USP is a lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 gram vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin hydrochloride for injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9] oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:."
},
{
"NDCCode": "72611-765-10",
"PackageDescription": "10 VIAL in 1 CARTON (72611-765-10) / 20 mL in 1 VIAL (72611-765-01) ",
"NDC11Code": "72611-0765-10",
"ProductNDC": "72611-765",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200508",
"EndMarketingDate": "20241201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205694",
"LabelerName": "Almaject, Inc.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/20mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-12-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200508",
"EndMarketingDatePackage": "20241201",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin hydrochloride for injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin hydrochloride for injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin hydrochloride for injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin hydrochloride for injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin hydrochloride for injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin hydrochloride for injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of vancomycin hydrochloride for injection, USP and other antibacterial drugs, vancomycin hydrochloride for injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
"Description": "Vancomycin hydrochloride for injection, USP is a lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 gram vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin hydrochloride for injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9] oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:."
},
{
"NDCCode": "72611-779-02",
"PackageDescription": "1 KIT in 1 CARTON (72611-779-02) * 10 mL in 1 VIAL, SINGLE-DOSE (72611-772-01) * 10 mL in 1 VIAL, SINGLE-DOSE (72611-776-01) ",
"NDC11Code": "72611-0779-02",
"ProductNDC": "72611-779",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Melphalan Hydrochloride",
"NonProprietaryName": "Melphalan Hydrochloride",
"DosageFormName": "KIT",
"StartMarketingDate": "20190518",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204817",
"LabelerName": "Almaject, Inc.",
"Status": "Deprecated",
"LastUpdate": "2025-08-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20201101",
"SamplePackage": "N",
"IndicationAndUsage": "Melphalan hydrochloride for injection is indicated for the palliative treatment of patients with multiple myeloma for whom oral therapy is not appropriate.",
"Description": "Melphalan, also known as L-phenylalanine mustard, phenylalanine mustard, L-PAM, or L-sarcolysin, is a phenylalanine derivative of nitrogen mustard. Melphalan is a bifunctional alkylating agent that is active against selected human neoplastic diseases. It is known chemically as 4-[bis(2-chloroethyl)amino]-L-phenylalanine. The molecular formula is C13H18Cl2N2O2 and the molecular weight is 305.20. The structural formula is. Melphalan is the active L-isomer of the compound and was first synthesized in 1953 by Bergel and Stock; the D-isomer, known as medphalan, is less active against certain animal tumors, and the dose needed to produce effects on chromosomes is larger than that required with the L-isomer. The racemic (DL-) form is known as merphalan or sarcolysin. Melphalan is practically insoluble in water and has a pKa1 of ~ 2.5. Melphalan hydrochloride for injection is supplied as a sterile, nonpyrogenic, freeze-dried powder. Each single-dose vial contains melphalan hydrochloride equivalent to 50 mg melphalan and 20 mg povidone. Melphalan hydrochloride for injection is reconstituted using the sterile diluent provided. Each vial of sterile diluent contains sodium citrate 0.2 g, propylene glycol 6.0 mL, ethanol (96%) 0.52 mL, and Water for Injection to a total of 10 mL. Melphalan hydrochloride for injection is administered intravenously."
},
{
"NDCCode": "72611-874-10",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (72611-874-10) / 5 mL in 1 VIAL, SINGLE-DOSE (72611-874-01) ",
"NDC11Code": "72611-0874-10",
"ProductNDC": "72611-874",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Regadenoson",
"NonProprietaryName": "Regadenoson",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230703",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207320",
"LabelerName": "Almaject, Inc.",
"SubstanceName": "REGADENOSON",
"StrengthNumber": ".08",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adenosine Receptor Agonists [MoA], Pharmacologic Cardiac Stress Test Agent [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230703",
"SamplePackage": "N",
"IndicationAndUsage": "Regadenoson injection is a pharmacologic stress agent indicated for radionuclide myocardial perfusion imaging (MPI) in patients unable to undergo adequate exercise stress.",
"Description": "Regadenoson is an A2A adenosine receptor agonist that is a coronary vasodilator [see Clinical Pharmacology (12.1)]. Regadenoson is chemically described as adenosine, 2- [4-[(methylamino) carbonyl]-1H-pyrazol-1-yl]-, monohydrate. Its structural formula is. The molecular formula for regadenoson is C15H18N8O5.H2O and its molecular weight is 408.37.Regadenoson injection is a sterile, nonpyrogenic solution for intravenous injection. The solution is clear and colorless. Each 1 mL in the 5 mL vial contains 0.08 mg of regadenoson, 10.9 mg dibasic sodium phosphate dihydrate, 5.4 mg monobasic sodium phosphate monohydrate, 150 mg propylene glycol, 1 mg edetate disodium dihydrate, and Water for Injection, with pH between 6.3 and 7.7."
},
{
"NDCCode": "80425-0245-1",
"PackageDescription": "1 KIT in 1 CARTON (80425-0245-1) * 10 mL in 1 VIAL, SINGLE-DOSE (0409-1159-18) * .9 mL in 1 PACKET (67777-419-02) * 5 mL in 1 POUCH * 10 AMPULE in 1 CARTON (55150-158-72) / 2 mL in 1 AMPULE * 1 mL in 1 VIAL, SINGLE-DOSE (72611-722-01) ",
"NDC11Code": "80425-0245-01",
"ProductNDC": "80425-0245",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketorocaine Lm Kit",
"NonProprietaryName": "Ketorolac Tromethamine, Lidocaine Hydrochloride, Bupivacaine Hydrochloride, Povidine Iodine",
"DosageFormName": "KIT",
"RouteName": "EPIDURAL; INFILTRATION; INTRAMUSCULAR; INTRAVENOUS; TOPICAL",
"StartMarketingDate": "20230512",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Advanced Rx Pharmacy of Tennessee, LLC",
"Status": "Active",
"LastUpdate": "2025-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230512",
"SamplePackage": "N"
},
{
"NDCCode": "10135-760-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (10135-760-10) ",
"NDC11Code": "10135-0760-10",
"ProductNDC": "10135-760",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine Besylate",
"NonProprietaryName": "Amlodipine Besylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20221001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207821",
"LabelerName": "Marlex Pharmaceuticals, Inc.",
"SubstanceName": "AMLODIPINE BESYLATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20221001",
"SamplePackage": "N",
"IndicationAndUsage": ". Amlodipine besylate tablets, are a calcium channel blocker and may be used alone or in combination with other antihypertensive and antianginal agents for the treatment of. : 1 Hypertension ( 1.1) Amlodipine besylate tablets, are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions., 2 Coronary Artery Disease ( 1.2) Chronic Stable AnginaVasospastic Angina (Prinzmetal’s or Variant Angina)Angiographically Documented Coronary Artery Disease in patients without heart failure or an ejection fraction < 40%.",
"Description": "Amlodipine besylate tablets, USP is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate, USP is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its empirical formula is C 20H 25ClN 2O 5C 6H 6O 3S, and its structural formula is:. Amlodipine besylate, USP is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate tablets, USP are formulated as white tablets equivalent to 2.5, 5, and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, USP, each tablet contains the following inactive ingredients: microcrystalline cellulose, dibasic calcium phosphate dihydrate, sodium starch glycolate, and magnesium stearate."
},
{
"NDCCode": "11797-760-06",
"PackageDescription": "10 SYRINGE in 1 CARTON (11797-760-06) > .8 mL in 1 SYRINGE (11797-760-02) ",
"NDC11Code": "11797-0760-06",
"ProductNDC": "11797-760",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Enoxaparin Sodium",
"NonProprietaryName": "Enoxaparin Sodium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20210401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076726",
"LabelerName": "Italfarmaco SpA",
"SubstanceName": "ENOXAPARIN SODIUM",
"StrengthNumber": "80",
"StrengthUnit": "mg/.8mL",
"Pharm_Classes": "Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2022-11-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210401",
"SamplePackage": "N"
},
{
"NDCCode": "24909-760-10",
"PackageDescription": "100 mL in 1 BOTTLE (24909-760-10) ",
"NDC11Code": "24909-0760-10",
"ProductNDC": "24909-760",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cbd Clinic Ultimate Massage",
"NonProprietaryName": "Menthol, Camphor",
"DosageFormName": "OIL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20191115",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part348",
"LabelerName": "Aidance Skincare & Topical Solutions, LLC",
"SubstanceName": "CAMPHOR (NATURAL); MENTHOL",
"StrengthNumber": "5; 10",
"StrengthUnit": "g/100mL; g/100mL",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20191115",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves minor aches and pain of muscles and joints associated with: simple backache arthritis strains bruises sprains."
},
{
"NDCCode": "35356-760-10",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE (35356-760-10)",
"NDC11Code": "35356-0760-10",
"ProductNDC": "35356-760",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levofloxacin",
"NonProprietaryName": "Levofloxacin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20110621",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078424",
"LabelerName": "Lake Erie Medical DBA Quality Care Products LLC",
"SubstanceName": "LEVOFLOXACIN",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2018-03-16",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "37205-760-10",
"PackageDescription": "1 TUBE in 1 CARTON (37205-760-10) > 28 g in 1 TUBE",
"NDC11Code": "37205-0760-10",
"ProductNDC": "37205-760",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Leader Clotrimazole Anti-fungal",
"NonProprietaryName": "Clotrimazole",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20130531",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part333C",
"LabelerName": "Cardinal Health",
"SubstanceName": "CLOTRIMAZOLE",
"StrengthNumber": "1",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"IndicationAndUsage": "Directions: 1 wash affected area and dry thoroughly, 2 apply a thin layer over affected area twice daily (morning and night) or as directed by a doctor, 3 supervise children in the use of this product, 4 for athlete's foot, pay special attention to spaces between the toes, wear well-fitting, ventilated shoes and change shoes and socks at least once a day, 5 for athlete's foot and ringworm use daily, 6 this product is not effective on the scalp or nails."
},
{
"NDCCode": "43744-760-10",
"PackageDescription": "1 g in 1 DRUM (43744-760-10)",
"NDC11Code": "43744-0760-10",
"ProductNDC": "43744-760",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Ponazuril",
"DosageFormName": "POWDER",
"StartMarketingDate": "20130624",
"EndMarketingDate": "20130624",
"MarketingCategoryName": "BULK INGREDIENT FOR ANIMAL DRUG COMPOUNDING",
"LabelerName": "CBSCHEM LIMITED",
"SubstanceName": "PONAZURIL",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20130624"
},
{
"NDCCode": "43744-760-15",
"PackageDescription": "10 g in 1 DRUM (43744-760-15)",
"NDC11Code": "43744-0760-15",
"ProductNDC": "43744-760",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Ponazuril",
"DosageFormName": "POWDER",
"StartMarketingDate": "20130624",
"EndMarketingDate": "20130624",
"MarketingCategoryName": "BULK INGREDIENT FOR ANIMAL DRUG COMPOUNDING",
"LabelerName": "CBSCHEM LIMITED",
"SubstanceName": "PONAZURIL",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20130624"
},
{
"NDCCode": "47335-760-61",
"PackageDescription": "10 BLISTER PACK in 1 BOX, UNIT-DOSE (47335-760-61) / 10 TABLET, EXTENDED RELEASE in 1 BLISTER PACK",
"NDC11Code": "47335-0760-61",
"ProductNDC": "47335-760",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Venlafaxine Hydrochloride",
"NonProprietaryName": "Venlafaxine Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20141215",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091272",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "VENLAFAXINE HYDROCHLORIDE",
"StrengthNumber": "37.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2023-09-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190329",
"SamplePackage": "N",
"IndicationAndUsage": "Venlafaxine hydrochloride extended-release tablets are a selective serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for.",
"Description": "Venlafaxine hydrochloride extended-release tablets are extended-release tablets for oral administration that contain venlafaxine hydrochloride, a structurally novel antidepressant. Venlafaxine hydrochloride is a selective serotonin and norepinephrine reuptake inhibitor (SNRI). It is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α-[(dimethylamino)methyl]-p-methoxybenzyl] cyclohexanol hydrochloride and has the molecular formula of C17H27NO2HCl. Its molecular weight is 313.87. The structural formula is shown below. Venlafaxine hydrochloride is a white to off-white crystalline solid with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Venlafaxine hydrochloride extended-release tablets are formulated as an extended-release tablet for once-a-day oral administration. Venlafaxine hydrochloride extended-release tablets use a hydrogel-based technology to deliver venlafaxine hydrochloride at a controlled rate over approximately 24 hours. The system comprises of a bilayer tablet surrounded by a partially permeable coat. The bilayer tablet core consists of one colored swellable layer and a second drug containing layer. On contact of tablet with aqueous medium, the soluble components of the partially permeable membrane dissolve. Imbibition of the aqueous medium by the swellable layer causes it to swell rapidly. This exerts mechanical pressure on the coating causing it to rupture. The coating is removed from the swellable layer side only to expose a pre-defined surface area from which release of the drug occurs. The controlled rate of drug delivery is a function of controlled surface area and the excipients of the drug layer.The biologically inert fragments of the coating may remain intact and may be eliminated in the feces. Each extended-release coated bilayer tablet contains venlafaxine hydrochloride, USP equivalent to 37.5 mg, 75 mg, 150 mg, or 225 mg venlafaxine. Inactive ingredients consist of hypromellose, povidone, lactose monohydrate, methacrylic acid copolymer, talc, magnesium stearate, microcrystalline cellulose, crospovidone, colloidal silicon dioxide, sodium lauryl sulfate, FD & C Red No. 40 Aluminum Lake, ethyl cellulose aqueous dispersion, mannitol, dibutyl sebacate, triethyl citrate, polysorbate 20, polyethylene glycol, polysorbate 80, and polyvinyl alcohol. Imprinting ink contains shellac glaze, isopropyl alcohol, iron oxide black, N-butyl alcohol, propylene glycol and ammonium hydroxide."
},
{
"NDCCode": "59630-760-10",
"PackageDescription": "100 TABLET, CHEWABLE in 1 BOTTLE (59630-760-10)",
"NDC11Code": "59630-0760-10",
"ProductNDC": "59630-760",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methylin",
"NonProprietaryName": "Methylphenidate Hydrochloride",
"DosageFormName": "TABLET, CHEWABLE",
"RouteName": "ORAL",
"StartMarketingDate": "20101101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021475",
"LabelerName": "SHIONOGI INC.",
"SubstanceName": "METHYLPHENIDATE HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC],Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2017-01-18"
},
{
"NDCCode": "60687-760-86",
"PackageDescription": "3 TRAY in 1 CASE (60687-760-86) / 10 CUP, UNIT-DOSE in 1 TRAY (60687-760-46) / 5 mL in 1 CUP, UNIT-DOSE (60687-760-40) ",
"NDC11Code": "60687-0760-86",
"ProductNDC": "60687-760",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20230801",
"EndMarketingDate": "20270228",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022195",
"LabelerName": "American Health Packaging",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2025-11-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20230801",
"EndMarketingDatePackage": "20270228",
"SamplePackage": "N",
"IndicationAndUsage": "Morphine Sulfate Oral Solution 2 mg/mL is indicated for the management of: 1 adults with acute and chronic pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate., 2 pediatric patients 2 years of age and older with acute pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.",
"Description": "Morphine Sulfate Oral Solution is an opioid agonist, available in the following concentration for oral administration: 1 10 mg per 5 mL (2 mg/mL): Each 1 mL of oral solution contains 2 mg of morphine sulfate, USP (equivalent to 1.5 mg morphine). ."
},
{
"NDCCode": "63323-760-20",
"PackageDescription": "1 KIT in 1 CARTON (63323-760-20) * 10 mL in 1 VIAL, SINGLE-DOSE (63323-761-20) * 10 mL in 1 VIAL, SINGLE-USE (63323-732-10) ",
"NDC11Code": "63323-0760-20",
"ProductNDC": "63323-760",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Melphalan",
"NonProprietaryName": "Melphalan Hydrochloride",
"DosageFormName": "KIT",
"StartMarketingDate": "20171222",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203393",
"LabelerName": "Fresenius Kabi USA, LLC",
"Status": "Active",
"LastUpdate": "2026-02-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20171222",
"SamplePackage": "N",
"IndicationAndUsage": "Melphalan hydrochloride for injection is indicated for the palliative treatment of patients with multiple myeloma for whom oral therapy is not appropriate.",
"Description": "Melphalan, also known as L-phenylalanine mustard, phenylalanine mustard, L-PAM, or L-sarcolysin, is a phenylalanine derivative of nitrogen mustard. Melphalan is a bifunctional alkylating agent that is active against selected human neoplastic diseases. It is known chemically as 4-[bis(2-chloroethyl) amino]-L-phenylalanine. The structural formula is. C13 H18 Cl2 N2 O2 M.W. 305.20. Melphalan is the active L-isomer of the compound and was first synthesized in 1953 by Bergel and Stock; the D-isomer, known as medphalan, is less active against certain animal tumors, and the dose needed to produce effects on chromosomes is larger than that required with the L-isomer. The racemic (DL-) form is known as merphalan or sarcolysin. Melphalan is practically insoluble in water and has a pKa1 of approximately 2.5. Melphalan hydrochloride for injection is supplied as a sterile, nonpyrogenic, freeze-dried powder. Each single use vial contains melphalan hydrochloride equivalent to 50 mg melphalan and 20 mg povidone. Melphalan hydrochloride for injection is reconstituted using the sterile diluent provided. Each vial of sterile diluent contains sodium citrate 0.2 g, propylene glycol 6 mL, ethanol (100%) 0.5 mL, and water for injection to a total of 10 mL. Melphalan hydrochloride is administered intravenously."
},
{
"NDCCode": "63824-760-20",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (63824-760-20) > 10 LOZENGE in 1 BLISTER PACK",
"NDC11Code": "63824-0760-20",
"ProductNDC": "63824-760",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cepacol Sensations",
"ProprietaryNameSuffix": "Warming",
"NonProprietaryName": "Benzocaine",
"DosageFormName": "LOZENGE",
"RouteName": "ORAL",
"StartMarketingDate": "20120610",
"EndMarketingDate": "20160229",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part356",
"LabelerName": "Reckitt Benckiser LLC",
"SubstanceName": "BENZOCAINE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2016-03-04"
},
{
"NDCCode": "64679-760-04",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (64679-760-04) > 1 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "64679-0760-04",
"ProductNDC": "64679-760",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Promethazine Hcl",
"NonProprietaryName": "Promethazine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20091223",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040785",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "PROMETHAZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Phenothiazine [EPC],Phenothiazines [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20091223",
"SamplePackage": "N",
"IndicationAndUsage": "Promethazine HCl Injection is indicated for the following conditions: : 1 Amelioration of allergic reactions to blood or plasma., 2 In anaphylaxis as an adjunct to epinephrine and other standard measures after the acute symptoms have been controlled., 3 For other uncomplicated allergic conditions of the immediate type when oral therapy is impossible or contraindicated., 4 For sedation and relief of apprehension and to produce light sleep from which the patient can be easily aroused., 5 Active treatment of motion sickness., 6 Prevention and control of nausea and vomiting associated with certain types of anesthesia and surgery., 7 As an adjunct to analgesics for the control of postoperative pain., 8 Preoperative, postoperative, and obstetric (during labor) sedation., 9 Intravenously in special surgical situations, such as repeated bronchoscopy, ophthalmic surgery, and poor-risk patients, with reduced amounts of meperidine or other narcotic analgesic as an adjunct to anesthesia and analgesia.",
"Description": "Promethazine HCl Injection USP, is a sterile, pyrogen-free solution for deep intramuscular or intravenous administration. Promethazine HCl (10H-Phenothiazine-10 ethanamine,N,N,α-trimethyl-, monohydrochloride, (±)-) is a racemic compound and has the following structural formula:. C17H21ClN2S MW 320.88. Each mL contains Promethazine HCl, either 25 mg or 50 mg with 0.1 mg edetate disodium, 0.04 mg calcium chloride, 0.5 mg sodium metabisulfite in water for injection. The pH range is 4.0 to 5.5; buffered with acetic acid-sodium acetate, and it is sealed under nitrogen. Promethazine HCl Injection is a clear, colorless solution. The product is light sensitive. It should be inspected before use and discarded if either color or particulate is observed."
},
{
"NDCCode": "65841-760-10",
"PackageDescription": "1000 CAPSULE, DELAYED RELEASE in 1 BOTTLE (65841-760-10) ",
"NDC11Code": "65841-0760-10",
"ProductNDC": "65841-760",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omeprazole",
"NonProprietaryName": "Omeprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20121123",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091352",
"LabelerName": "Zydus Lifesciences Limited",
"SubstanceName": "OMEPRAZOLE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-12-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20121123",
"SamplePackage": "N"
},
{
"NDCCode": "65862-760-78",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (65862-760-78) / 10 CAPSULE in 1 BLISTER PACK (65862-760-10) ",
"NDC11Code": "65862-0760-78",
"ProductNDC": "65862-760",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20230329",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205321",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2026-05-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230329",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsules are indicated for.",
"Description": "Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin USP is a white to off-white powder with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is – 1.35. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin USP, along with corn starch and talc as inactive ingredients. The capsule shells contain gelatin, titanium dioxide, and sodium lauryl sulphate. In addition, 75 mg, 100 mg, 200 mg, 225 mg and 300 mg capsules contain red iron oxide. The imprinting ink contains black iron oxide, potassium hydroxide, propylene glycol, and shellac."
},
{
"NDCCode": "68094-760-62",
"PackageDescription": "3 TRAY in 1 CASE (68094-760-62) > 10 CUP, UNIT-DOSE in 1 TRAY > 2.5 mL in 1 CUP, UNIT-DOSE (68094-760-59)",
"NDC11Code": "68094-0760-62",
"ProductNDC": "68094-760",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Codeine Sulfate",
"NonProprietaryName": "Codeine Sulfate",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20130225",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA202245",
"LabelerName": "Precision Dose Inc.",
"SubstanceName": "CODEINE SULFATE",
"StrengthNumber": "15",
"StrengthUnit": "mg/2.5mL",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2016-01-22"
},
{
"NDCCode": "68382-760-10",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (68382-760-10) ",
"NDC11Code": "68382-0760-10",
"ProductNDC": "68382-760",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20141209",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203686",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "1000",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2026-08-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141209",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin hydrochloride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus.",
"Description": "Metformin hydrochloride tablets contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below. Metformin hydrochloride, USP is a white crystalline powder with a molecular formula of C4H11N5 HCl and a molecular weight of 165.63. Metformin hydrochloride is freely soluble in water, slightly soluble in alcohol and is practically insoluble in acetone and methylene chloride. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride tablets, USP contain 500 mg or 850 mg or 1,000 mg of metformin hydrochloride, USP. Each tablet contains the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone and sodium starch glycolate. The methodology used for dissolution testing is USP Test 1 for metformin hydrochloride tablets, USP."
},
{
"NDCCode": "68462-760-10",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (68462-760-10) / 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "68462-0760-10",
"ProductNDC": "68462-760",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Epinephrine",
"NonProprietaryName": "Epinephrine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20250206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219239",
"LabelerName": "GLENMARK PHARMACEUTICALS INC., USA",
"SubstanceName": "EPINEPHRINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250206",
"SamplePackage": "N",
"IndicationAndUsage": "Epinephrine is a non-selective alpha and beta adrenergic agonist indicated: 1 To increase mean arterial blood pressure in adult patients with hypotension associated with septic shock (1.1) , 2 For emergency treatment of allergic reactions (Type 1), including anaphylaxis (1.2) .",
"Description": "Epinephrine Injection, USP is a clear, colorless, sterile solution containing 1 mg/mL epinephrine. 10 mL Multiple-Dose Vial:10 mL multiple-dose amber glass vial containing 10 mg/10 mL (1 mg/mL) epinephrine as a sterile, nonpyrogenic, clear and colorless solution. In the 10 mL vial, each 1 mL of Epinephrine Injection, USP solution contains 1 mg epinephrine, 5.25 mg chlorobutanol hemihydrate as preservative, 7.5 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid for pH adjustment and water for injection. The pH range is 2.2 to 5.0. 30 mL Multiple Dose Vial:. 30 mL multiple dose amber glass vial containing 30 mg/30 mL epinephrine as a sterile, nonpyrogenic, clear and colorless solution. In the 30 mL vial, each 1 mL of Epinephrine Injection USP solution contains 1 mg epinephrine, 5.25 mg chlorobutanol hemihydrate as preservative, 7.5 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid for pH adjustment and water for injection. The pH range is 2.2 to 5.0. Epinephrine is a sympathomimetic catecholamine. The chemical name of epinephrine is: 1,2-Benzenediol, 4-[(1R)-1-hydroxy-2-(methylamino)ethyl]-, or (-)-3,4-Dihydroxy-α-[2- (methylamino)ethyl]benzyl alcohol. The chemical structure of epinephrine is. The molecular weight of epinephrine is 183.2. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>72611-760-10</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (72611-760-10) / 10 mL in 1 VIAL, SINGLE-DOSE (72611-760-01) </PackageDescription>
<NDC11Code>72611-0760-10</NDC11Code>
<ProductNDC>72611-760</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tranexamic Acid</ProprietaryName>
<NonProprietaryName>Tranexamic Acid</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207239</ApplicationNumber>
<LabelerName>Almaject, Inc.</LabelerName>
<SubstanceName>TRANEXAMIC ACID</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antifibrinolytic Agent [EPC], Decreased Fibrinolysis [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-10-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tranexamic acid injection is indicated in patients with hemophilia for short-term use (2 to 8 days) to reduce or prevent hemorrhage and reduce the need for replacement therapy during and following tooth extraction.</IndicationAndUsage>
<Description>Tranexamic acid, USP is trans-4-(aminomethyl)cyclohexanecarboxylic acid, an antifibrinolytic agent. Tranexamic acid, USP is a white crystalline powder. The structural formula is. Empirical Formula: C8H15NO2 Molecular Weight: 157.2. Each mL of the sterile solution for intravenous injection contains 100 mg tranexamic acid, USP and Water for Injection to 1 mL. The aqueous solution for injection has a pH of 6.5 to 8.0.</Description>
</NDC>
<NDC>
<NDCCode>72611-700-01</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (72611-700-01) / 10.8 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>72611-0700-01</NDC11Code>
<ProductNDC>72611-700</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Caspofungin Acetate</ProprietaryName>
<NonProprietaryName>Caspofungin Acetate</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200331</StartMarketingDate>
<EndMarketingDate>20251101</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207092</ApplicationNumber>
<LabelerName>Almaject, Inc.</LabelerName>
<SubstanceName>CASPOFUNGIN ACETATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Echinocandin Antifungal [EPC], Lipopeptides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200331</StartMarketingDatePackage>
<EndMarketingDatePackage>20251101</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Caspofungin acetate for injection is an echinocandin antifungal indicated in adults and pediatric patients (3 months of age and older) for: : 1 Empirical therapy for presumed fungal infections in febrile, neutropenic patients. (1) , 2 Treatment of candidemia and the following Candida infections: intra-abdominal abscesses, peritonitis and pleural space infections. (1) , 3 Treatment of esophageal candidiasis. (1) , 4 Treatment of invasive aspergillosis in patients who are refractory to or intolerant of other therapies. (1) .</IndicationAndUsage>
<Description>Caspofungin acetate for injection is a sterile, lyophilized product for intravenous (IV) infusion that contains a semisynthetic lipopeptide (echinocandin) compound synthesized from a fermentation product of Glarea lozoyensis. Caspofungin acetate is an echinocandin antifungal that inhibits the synthesis of β (1,3)-D-glucan, an integral component of the fungal cell wall. Caspofungin acetate is 1-[(4R,5S)-5-[(2-aminoethyl)amino]-N2-(10,12-dimethyl-1-oxotetradecyl)-4-hydroxy-L-ornithine]-5-[(3R)-3-hydroxy-L-ornithine] pneumocandin B0 diacetate (salt). Caspofungin acetate for injection 50 mg vial contains 50 mg of caspofungin equivalent to 55.5 mg of caspofungin acetate. Caspofungin acetate for injection 50 mg vial also contains 39 mg sucrose, 26 mg mannitol, 2 mg glacial acetic acid added as a buffering agent, and sodium hydroxide added as a pH adjuster ingredient. Caspofungin acetate for injection 70 mg vial contains 70 mg of caspofungin equivalent to 77.7 mg of caspofungin acetate. Caspofungin acetate for injection 70 mg vial also contains 54 mg sucrose, 36 mg mannitol, 2.7 mg glacial acetic acid added as a buffering agent, and sodium hydroxide added as a pH adjuster ingredient. Caspofungin acetate is a hygroscopic, white to off-white powder. It is freely soluble in water and methanol, and slightly soluble in ethanol. The pH of a saturated aqueous solution of caspofungin acetate is approximately 6.6. The empirical formula is C52H88N10O152C2H4O2 and the formula weight is 1213.42. The structural formula is:.</Description>
</NDC>
<NDC>
<NDCCode>72611-702-01</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (72611-702-01) / 10.8 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>72611-0702-01</NDC11Code>
<ProductNDC>72611-702</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Caspofungin Acetate</ProprietaryName>
<NonProprietaryName>Caspofungin Acetate</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200331</StartMarketingDate>
<EndMarketingDate>20241101</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207092</ApplicationNumber>
<LabelerName>Almaject, Inc.</LabelerName>
<SubstanceName>CASPOFUNGIN ACETATE</SubstanceName>
<StrengthNumber>7</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Echinocandin Antifungal [EPC], Lipopeptides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-11-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200331</StartMarketingDatePackage>
<EndMarketingDatePackage>20241101</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Caspofungin acetate for injection is an echinocandin antifungal indicated in adults and pediatric patients (3 months of age and older) for: : 1 Empirical therapy for presumed fungal infections in febrile, neutropenic patients. (1) , 2 Treatment of candidemia and the following Candida infections: intra-abdominal abscesses, peritonitis and pleural space infections. (1) , 3 Treatment of esophageal candidiasis. (1) , 4 Treatment of invasive aspergillosis in patients who are refractory to or intolerant of other therapies. (1) .</IndicationAndUsage>
<Description>Caspofungin acetate for injection is a sterile, lyophilized product for intravenous (IV) infusion that contains a semisynthetic lipopeptide (echinocandin) compound synthesized from a fermentation product of Glarea lozoyensis. Caspofungin acetate is an echinocandin antifungal that inhibits the synthesis of β (1,3)-D-glucan, an integral component of the fungal cell wall. Caspofungin acetate is 1-[(4R,5S)-5-[(2-aminoethyl)amino]-N2-(10,12-dimethyl-1-oxotetradecyl)-4-hydroxy-L-ornithine]-5-[(3R)-3-hydroxy-L-ornithine] pneumocandin B0 diacetate (salt). Caspofungin acetate for injection 50 mg vial contains 50 mg of caspofungin equivalent to 55.5 mg of caspofungin acetate. Caspofungin acetate for injection 50 mg vial also contains 39 mg sucrose, 26 mg mannitol, 2 mg glacial acetic acid added as a buffering agent, and sodium hydroxide added as a pH adjuster ingredient. Caspofungin acetate for injection 70 mg vial contains 70 mg of caspofungin equivalent to 77.7 mg of caspofungin acetate. Caspofungin acetate for injection 70 mg vial also contains 54 mg sucrose, 36 mg mannitol, 2.7 mg glacial acetic acid added as a buffering agent, and sodium hydroxide added as a pH adjuster ingredient. Caspofungin acetate is a hygroscopic, white to off-white powder. It is freely soluble in water and methanol, and slightly soluble in ethanol. The pH of a saturated aqueous solution of caspofungin acetate is approximately 6.6. The empirical formula is C52H88N10O152C2H4O2 and the formula weight is 1213.42. The structural formula is:.</Description>
</NDC>
<NDC>
<NDCCode>72611-740-10</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (72611-740-10) / 5 mL in 1 VIAL, SINGLE-DOSE (72611-740-01) </PackageDescription>
<NDC11Code>72611-0740-10</NDC11Code>
<ProductNDC>72611-740</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoprolol Tartrate</ProprietaryName>
<NonProprietaryName>Metoprolol Tartrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200331</StartMarketingDate>
<EndMarketingDate>20261101</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204205</ApplicationNumber>
<LabelerName>Almaject, Inc.</LabelerName>
<SubstanceName>METOPROLOL TARTRATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200331</StartMarketingDatePackage>
<EndMarketingDatePackage>20261101</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metoprolol tartrate injection is indicated in the treatment of definite or suspected acute myocardial infarction in hemodynamically stable patients to reduce cardiovascular mortality when used in conjunction with oral metoprolol maintenance therapy.</IndicationAndUsage>
<Description>Metoprolol tartrate USP, is a selective beta1-adrenoreceptor blocking agent, available in 5 mL vials for intravenous administration. Each vial contains a sterile solution of metoprolol tartrate USP, 5 mg, and sodium chloride USP, 45 mg, and water for injection USP. Metoprolol tartrate USP is (±)-1-(Isopropylamino)-3-[p-(2-methoxyethyl)phenoxy]-2-propanol L- (+)-tartrate (2:1) salt, and its structural formula is. Metoprolol tartrate USP is a white, practically odorless, crystalline powder with a molecular weight of 684.82. It is very soluble in water; freely soluble in methylene chloride, in chloroform, and in alcohol; slightly soluble in acetone; and insoluble in ether.</Description>
</NDC>
<NDC>
<NDCCode>72611-749-10</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (72611-749-10) / 10 mL in 1 VIAL, MULTI-DOSE (72611-749-01) </PackageDescription>
<NDC11Code>72611-0749-10</NDC11Code>
<ProductNDC>72611-749</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Midazolam</ProprietaryName>
<NonProprietaryName>Midazolam</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20200414</StartMarketingDate>
<EndMarketingDate>20260401</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090850</ApplicationNumber>
<LabelerName>Almaject, Inc.</LabelerName>
<SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200414</StartMarketingDatePackage>
<EndMarketingDatePackage>20260401</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Midazolam Injection is indicated: : 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia;, 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants;, 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia);, 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting. .</IndicationAndUsage>
<Description>Midazolam hydrochloride is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 5 mg midazolam compounded with 0.8% sodium chloride and 0.01% edetate disodium, with 1% benzyl alcohol as preservative; the pH is adjusted to 2.9 to 3.5 with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white or yellowish crystalline powder, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the empirical formula C18H13ClFN3HCl, a calculated molecular weight of 362.25 and the following structural formula:. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form.</Description>
</NDC>
<NDC>
<NDCCode>72611-756-10</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (72611-756-10) / 5 mL in 1 VIAL, MULTI-DOSE (72611-756-01) </PackageDescription>
<NDC11Code>72611-0756-10</NDC11Code>
<ProductNDC>72611-756</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rocuronium Bromide</ProprietaryName>
<NonProprietaryName>Rocuronium Bromide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200327</StartMarketingDate>
<EndMarketingDate>20250301</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205656</ApplicationNumber>
<LabelerName>Almaject, Inc.</LabelerName>
<SubstanceName>ROCURONIUM BROMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200327</StartMarketingDatePackage>
<EndMarketingDatePackage>20250301</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rocuronium bromide injection is indicated for inpatients and outpatients as an adjunct to general anesthesia to facilitate both rapid sequence and routine tracheal intubation, and to provide skeletal muscle relaxation during surgery or mechanical ventilation.</IndicationAndUsage>
<Description>Rocuronium bromide injection is a nondepolarizing neuromuscular blocking agent with a rapid to intermediate onset depending on dose and intermediate duration. Rocuronium bromide is chemically designated as 1-[17β-(acetyloxy)-3α-hydroxy-2β-(4-morpholinyl)-5α-androstan-16β-yl]-1-(2- propenyl)pyrrolidinium bromide. The structural formula is. The chemical formula is C32H53BrN2O4 with a molecular weight of 609.70. The partition coefficient of rocuronium bromide in n-octanol/water is 0.5 at 20°C. Rocuronium bromide is supplied as a sterile, nonpyrogenic, isotonic solution that is clear, colorless to yellow/orange, for intravenous injection only. Each mL contains 10 mg rocuronium bromide and 2 mg sodium acetate. The aqueous solution is adjusted to isotonicity with sodium chloride and to a pH of 4 with acetic acid and/or sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>72611-757-10</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (72611-757-10) / 10 mL in 1 VIAL, MULTI-DOSE (72611-757-01) </PackageDescription>
<NDC11Code>72611-0757-10</NDC11Code>
<ProductNDC>72611-757</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rocuronium Bromide</ProprietaryName>
<NonProprietaryName>Rocuronium Bromide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200327</StartMarketingDate>
<EndMarketingDate>20250301</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205656</ApplicationNumber>
<LabelerName>Almaject, Inc.</LabelerName>
<SubstanceName>ROCURONIUM BROMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200327</StartMarketingDatePackage>
<EndMarketingDatePackage>20250301</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rocuronium bromide injection is indicated for inpatients and outpatients as an adjunct to general anesthesia to facilitate both rapid sequence and routine tracheal intubation, and to provide skeletal muscle relaxation during surgery or mechanical ventilation.</IndicationAndUsage>
<Description>Rocuronium bromide injection is a nondepolarizing neuromuscular blocking agent with a rapid to intermediate onset depending on dose and intermediate duration. Rocuronium bromide is chemically designated as 1-[17β-(acetyloxy)-3α-hydroxy-2β-(4-morpholinyl)-5α-androstan-16β-yl]-1-(2- propenyl)pyrrolidinium bromide. The structural formula is. The chemical formula is C32H53BrN2O4 with a molecular weight of 609.70. The partition coefficient of rocuronium bromide in n-octanol/water is 0.5 at 20°C. Rocuronium bromide is supplied as a sterile, nonpyrogenic, isotonic solution that is clear, colorless to yellow/orange, for intravenous injection only. Each mL contains 10 mg rocuronium bromide and 2 mg sodium acetate. The aqueous solution is adjusted to isotonicity with sodium chloride and to a pH of 4 with acetic acid and/or sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>72611-761-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (72611-761-10) / 10 mL in 1 VIAL (72611-761-01) </PackageDescription>
<NDC11Code>72611-0761-10</NDC11Code>
<ProductNDC>72611-761</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200508</StartMarketingDate>
<EndMarketingDate>20250201</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205694</ApplicationNumber>
<LabelerName>Almaject, Inc.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200508</StartMarketingDatePackage>
<EndMarketingDatePackage>20250201</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin hydrochloride for injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin hydrochloride for injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin hydrochloride for injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin hydrochloride for injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin hydrochloride for injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin hydrochloride for injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of vancomycin hydrochloride for injection, USP and other antibacterial drugs, vancomycin hydrochloride for injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
<Description>Vancomycin hydrochloride for injection, USP is a lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 gram vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin hydrochloride for injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9] oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>72611-765-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (72611-765-10) / 20 mL in 1 VIAL (72611-765-01) </PackageDescription>
<NDC11Code>72611-0765-10</NDC11Code>
<ProductNDC>72611-765</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200508</StartMarketingDate>
<EndMarketingDate>20241201</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205694</ApplicationNumber>
<LabelerName>Almaject, Inc.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/20mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200508</StartMarketingDatePackage>
<EndMarketingDatePackage>20241201</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin hydrochloride for injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin hydrochloride for injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin hydrochloride for injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin hydrochloride for injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin hydrochloride for injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin hydrochloride for injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of vancomycin hydrochloride for injection, USP and other antibacterial drugs, vancomycin hydrochloride for injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
<Description>Vancomycin hydrochloride for injection, USP is a lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 gram vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin hydrochloride for injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9] oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>72611-779-02</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (72611-779-02) * 10 mL in 1 VIAL, SINGLE-DOSE (72611-772-01) * 10 mL in 1 VIAL, SINGLE-DOSE (72611-776-01) </PackageDescription>
<NDC11Code>72611-0779-02</NDC11Code>
<ProductNDC>72611-779</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Melphalan Hydrochloride</ProprietaryName>
<NonProprietaryName>Melphalan Hydrochloride</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20190518</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204817</ApplicationNumber>
<LabelerName>Almaject, Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2025-08-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Melphalan hydrochloride for injection is indicated for the palliative treatment of patients with multiple myeloma for whom oral therapy is not appropriate.</IndicationAndUsage>
<Description>Melphalan, also known as L-phenylalanine mustard, phenylalanine mustard, L-PAM, or L-sarcolysin, is a phenylalanine derivative of nitrogen mustard. Melphalan is a bifunctional alkylating agent that is active against selected human neoplastic diseases. It is known chemically as 4-[bis(2-chloroethyl)amino]-L-phenylalanine. The molecular formula is C13H18Cl2N2O2 and the molecular weight is 305.20. The structural formula is. Melphalan is the active L-isomer of the compound and was first synthesized in 1953 by Bergel and Stock; the D-isomer, known as medphalan, is less active against certain animal tumors, and the dose needed to produce effects on chromosomes is larger than that required with the L-isomer. The racemic (DL-) form is known as merphalan or sarcolysin. Melphalan is practically insoluble in water and has a pKa1 of ~ 2.5. Melphalan hydrochloride for injection is supplied as a sterile, nonpyrogenic, freeze-dried powder. Each single-dose vial contains melphalan hydrochloride equivalent to 50 mg melphalan and 20 mg povidone. Melphalan hydrochloride for injection is reconstituted using the sterile diluent provided. Each vial of sterile diluent contains sodium citrate 0.2 g, propylene glycol 6.0 mL, ethanol (96%) 0.52 mL, and Water for Injection to a total of 10 mL. Melphalan hydrochloride for injection is administered intravenously.</Description>
</NDC>
<NDC>
<NDCCode>72611-874-10</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (72611-874-10) / 5 mL in 1 VIAL, SINGLE-DOSE (72611-874-01) </PackageDescription>
<NDC11Code>72611-0874-10</NDC11Code>
<ProductNDC>72611-874</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Regadenoson</ProprietaryName>
<NonProprietaryName>Regadenoson</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230703</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207320</ApplicationNumber>
<LabelerName>Almaject, Inc.</LabelerName>
<SubstanceName>REGADENOSON</SubstanceName>
<StrengthNumber>.08</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adenosine Receptor Agonists [MoA], Pharmacologic Cardiac Stress Test Agent [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230703</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Regadenoson injection is a pharmacologic stress agent indicated for radionuclide myocardial perfusion imaging (MPI) in patients unable to undergo adequate exercise stress.</IndicationAndUsage>
<Description>Regadenoson is an A2A adenosine receptor agonist that is a coronary vasodilator [see Clinical Pharmacology (12.1)]. Regadenoson is chemically described as adenosine, 2- [4-[(methylamino) carbonyl]-1H-pyrazol-1-yl]-, monohydrate. Its structural formula is. The molecular formula for regadenoson is C15H18N8O5.H2O and its molecular weight is 408.37.Regadenoson injection is a sterile, nonpyrogenic solution for intravenous injection. The solution is clear and colorless. Each 1 mL in the 5 mL vial contains 0.08 mg of regadenoson, 10.9 mg dibasic sodium phosphate dihydrate, 5.4 mg monobasic sodium phosphate monohydrate, 150 mg propylene glycol, 1 mg edetate disodium dihydrate, and Water for Injection, with pH between 6.3 and 7.7.</Description>
</NDC>
<NDC>
<NDCCode>80425-0245-1</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (80425-0245-1) * 10 mL in 1 VIAL, SINGLE-DOSE (0409-1159-18) * .9 mL in 1 PACKET (67777-419-02) * 5 mL in 1 POUCH * 10 AMPULE in 1 CARTON (55150-158-72) / 2 mL in 1 AMPULE * 1 mL in 1 VIAL, SINGLE-DOSE (72611-722-01) </PackageDescription>
<NDC11Code>80425-0245-01</NDC11Code>
<ProductNDC>80425-0245</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketorocaine Lm Kit</ProprietaryName>
<NonProprietaryName>Ketorolac Tromethamine, Lidocaine Hydrochloride, Bupivacaine Hydrochloride, Povidine Iodine</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRAMUSCULAR; INTRAVENOUS; TOPICAL</RouteName>
<StartMarketingDate>20230512</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Advanced Rx Pharmacy of Tennessee, LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230512</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>10135-760-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (10135-760-10) </PackageDescription>
<NDC11Code>10135-0760-10</NDC11Code>
<ProductNDC>10135-760</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine Besylate</ProprietaryName>
<NonProprietaryName>Amlodipine Besylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207821</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>. Amlodipine besylate tablets, are a calcium channel blocker and may be used alone or in combination with other antihypertensive and antianginal agents for the treatment of. : 1 Hypertension ( 1.1) Amlodipine besylate tablets, are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions., 2 Coronary Artery Disease ( 1.2) Chronic Stable AnginaVasospastic Angina (Prinzmetal’s or Variant Angina)Angiographically Documented Coronary Artery Disease in patients without heart failure or an ejection fraction < 40%.</IndicationAndUsage>
<Description>Amlodipine besylate tablets, USP is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate, USP is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its empirical formula is C 20H 25ClN 2O 5C 6H 6O 3S, and its structural formula is:. Amlodipine besylate, USP is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate tablets, USP are formulated as white tablets equivalent to 2.5, 5, and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, USP, each tablet contains the following inactive ingredients: microcrystalline cellulose, dibasic calcium phosphate dihydrate, sodium starch glycolate, and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>11797-760-06</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (11797-760-06) > .8 mL in 1 SYRINGE (11797-760-02) </PackageDescription>
<NDC11Code>11797-0760-06</NDC11Code>
<ProductNDC>11797-760</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Enoxaparin Sodium</ProprietaryName>
<NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20210401</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076726</ApplicationNumber>
<LabelerName>Italfarmaco SpA</LabelerName>
<SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/.8mL</StrengthUnit>
<Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-11-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>24909-760-10</NDCCode>
<PackageDescription>100 mL in 1 BOTTLE (24909-760-10) </PackageDescription>
<NDC11Code>24909-0760-10</NDC11Code>
<ProductNDC>24909-760</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cbd Clinic Ultimate Massage</ProprietaryName>
<NonProprietaryName>Menthol, Camphor</NonProprietaryName>
<DosageFormName>OIL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20191115</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part348</ApplicationNumber>
<LabelerName>Aidance Skincare & Topical Solutions, LLC</LabelerName>
<SubstanceName>CAMPHOR (NATURAL); MENTHOL</SubstanceName>
<StrengthNumber>5; 10</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves minor aches and pain of muscles and joints associated with: simple backache arthritis strains bruises sprains.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>35356-760-10</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE (35356-760-10)</PackageDescription>
<NDC11Code>35356-0760-10</NDC11Code>
<ProductNDC>35356-760</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levofloxacin</ProprietaryName>
<NonProprietaryName>Levofloxacin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110621</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078424</ApplicationNumber>
<LabelerName>Lake Erie Medical DBA Quality Care Products LLC</LabelerName>
<SubstanceName>LEVOFLOXACIN</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-03-16</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>37205-760-10</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (37205-760-10) > 28 g in 1 TUBE</PackageDescription>
<NDC11Code>37205-0760-10</NDC11Code>
<ProductNDC>37205-760</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Leader Clotrimazole Anti-fungal</ProprietaryName>
<NonProprietaryName>Clotrimazole</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20130531</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part333C</ApplicationNumber>
<LabelerName>Cardinal Health</LabelerName>
<SubstanceName>CLOTRIMAZOLE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Directions: 1 wash affected area and dry thoroughly, 2 apply a thin layer over affected area twice daily (morning and night) or as directed by a doctor, 3 supervise children in the use of this product, 4 for athlete's foot, pay special attention to spaces between the toes, wear well-fitting, ventilated shoes and change shoes and socks at least once a day, 5 for athlete's foot and ringworm use daily, 6 this product is not effective on the scalp or nails.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>43744-760-10</NDCCode>
<PackageDescription>1 g in 1 DRUM (43744-760-10)</PackageDescription>
<NDC11Code>43744-0760-10</NDC11Code>
<ProductNDC>43744-760</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Ponazuril</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20130624</StartMarketingDate>
<EndMarketingDate>20130624</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR ANIMAL DRUG COMPOUNDING</MarketingCategoryName>
<LabelerName>CBSCHEM LIMITED</LabelerName>
<SubstanceName>PONAZURIL</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20130624</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>43744-760-15</NDCCode>
<PackageDescription>10 g in 1 DRUM (43744-760-15)</PackageDescription>
<NDC11Code>43744-0760-15</NDC11Code>
<ProductNDC>43744-760</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Ponazuril</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20130624</StartMarketingDate>
<EndMarketingDate>20130624</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR ANIMAL DRUG COMPOUNDING</MarketingCategoryName>
<LabelerName>CBSCHEM LIMITED</LabelerName>
<SubstanceName>PONAZURIL</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20130624</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>47335-760-61</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BOX, UNIT-DOSE (47335-760-61) / 10 TABLET, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>47335-0760-61</NDC11Code>
<ProductNDC>47335-760</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Venlafaxine Hydrochloride</ProprietaryName>
<NonProprietaryName>Venlafaxine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141215</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091272</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>VENLAFAXINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>37.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-09-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190329</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Venlafaxine hydrochloride extended-release tablets are a selective serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for.</IndicationAndUsage>
<Description>Venlafaxine hydrochloride extended-release tablets are extended-release tablets for oral administration that contain venlafaxine hydrochloride, a structurally novel antidepressant. Venlafaxine hydrochloride is a selective serotonin and norepinephrine reuptake inhibitor (SNRI). It is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α-[(dimethylamino)methyl]-p-methoxybenzyl] cyclohexanol hydrochloride and has the molecular formula of C17H27NO2HCl. Its molecular weight is 313.87. The structural formula is shown below. Venlafaxine hydrochloride is a white to off-white crystalline solid with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Venlafaxine hydrochloride extended-release tablets are formulated as an extended-release tablet for once-a-day oral administration. Venlafaxine hydrochloride extended-release tablets use a hydrogel-based technology to deliver venlafaxine hydrochloride at a controlled rate over approximately 24 hours. The system comprises of a bilayer tablet surrounded by a partially permeable coat. The bilayer tablet core consists of one colored swellable layer and a second drug containing layer. On contact of tablet with aqueous medium, the soluble components of the partially permeable membrane dissolve. Imbibition of the aqueous medium by the swellable layer causes it to swell rapidly. This exerts mechanical pressure on the coating causing it to rupture. The coating is removed from the swellable layer side only to expose a pre-defined surface area from which release of the drug occurs. The controlled rate of drug delivery is a function of controlled surface area and the excipients of the drug layer.The biologically inert fragments of the coating may remain intact and may be eliminated in the feces. Each extended-release coated bilayer tablet contains venlafaxine hydrochloride, USP equivalent to 37.5 mg, 75 mg, 150 mg, or 225 mg venlafaxine. Inactive ingredients consist of hypromellose, povidone, lactose monohydrate, methacrylic acid copolymer, talc, magnesium stearate, microcrystalline cellulose, crospovidone, colloidal silicon dioxide, sodium lauryl sulfate, FD & C Red No. 40 Aluminum Lake, ethyl cellulose aqueous dispersion, mannitol, dibutyl sebacate, triethyl citrate, polysorbate 20, polyethylene glycol, polysorbate 80, and polyvinyl alcohol. Imprinting ink contains shellac glaze, isopropyl alcohol, iron oxide black, N-butyl alcohol, propylene glycol and ammonium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>59630-760-10</NDCCode>
<PackageDescription>100 TABLET, CHEWABLE in 1 BOTTLE (59630-760-10)</PackageDescription>
<NDC11Code>59630-0760-10</NDC11Code>
<ProductNDC>59630-760</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methylin</ProprietaryName>
<NonProprietaryName>Methylphenidate Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, CHEWABLE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021475</ApplicationNumber>
<LabelerName>SHIONOGI INC.</LabelerName>
<SubstanceName>METHYLPHENIDATE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC],Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2017-01-18</LastUpdate>
</NDC>
<NDC>
<NDCCode>60687-760-86</NDCCode>
<PackageDescription>3 TRAY in 1 CASE (60687-760-86) / 10 CUP, UNIT-DOSE in 1 TRAY (60687-760-46) / 5 mL in 1 CUP, UNIT-DOSE (60687-760-40) </PackageDescription>
<NDC11Code>60687-0760-86</NDC11Code>
<ProductNDC>60687-760</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230801</StartMarketingDate>
<EndMarketingDate>20270228</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022195</ApplicationNumber>
<LabelerName>American Health Packaging</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-11-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20230801</StartMarketingDatePackage>
<EndMarketingDatePackage>20270228</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Morphine Sulfate Oral Solution 2 mg/mL is indicated for the management of: 1 adults with acute and chronic pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate., 2 pediatric patients 2 years of age and older with acute pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.</IndicationAndUsage>
<Description>Morphine Sulfate Oral Solution is an opioid agonist, available in the following concentration for oral administration: 1 10 mg per 5 mL (2 mg/mL): Each 1 mL of oral solution contains 2 mg of morphine sulfate, USP (equivalent to 1.5 mg morphine). .</Description>
</NDC>
<NDC>
<NDCCode>63323-760-20</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (63323-760-20) * 10 mL in 1 VIAL, SINGLE-DOSE (63323-761-20) * 10 mL in 1 VIAL, SINGLE-USE (63323-732-10) </PackageDescription>
<NDC11Code>63323-0760-20</NDC11Code>
<ProductNDC>63323-760</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Melphalan</ProprietaryName>
<NonProprietaryName>Melphalan Hydrochloride</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20171222</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203393</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-02-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Melphalan hydrochloride for injection is indicated for the palliative treatment of patients with multiple myeloma for whom oral therapy is not appropriate.</IndicationAndUsage>
<Description>Melphalan, also known as L-phenylalanine mustard, phenylalanine mustard, L-PAM, or L-sarcolysin, is a phenylalanine derivative of nitrogen mustard. Melphalan is a bifunctional alkylating agent that is active against selected human neoplastic diseases. It is known chemically as 4-[bis(2-chloroethyl) amino]-L-phenylalanine. The structural formula is. C13 H18 Cl2 N2 O2 M.W. 305.20. Melphalan is the active L-isomer of the compound and was first synthesized in 1953 by Bergel and Stock; the D-isomer, known as medphalan, is less active against certain animal tumors, and the dose needed to produce effects on chromosomes is larger than that required with the L-isomer. The racemic (DL-) form is known as merphalan or sarcolysin. Melphalan is practically insoluble in water and has a pKa1 of approximately 2.5. Melphalan hydrochloride for injection is supplied as a sterile, nonpyrogenic, freeze-dried powder. Each single use vial contains melphalan hydrochloride equivalent to 50 mg melphalan and 20 mg povidone. Melphalan hydrochloride for injection is reconstituted using the sterile diluent provided. Each vial of sterile diluent contains sodium citrate 0.2 g, propylene glycol 6 mL, ethanol (100%) 0.5 mL, and water for injection to a total of 10 mL. Melphalan hydrochloride is administered intravenously.</Description>
</NDC>
<NDC>
<NDCCode>63824-760-20</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (63824-760-20) > 10 LOZENGE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>63824-0760-20</NDC11Code>
<ProductNDC>63824-760</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cepacol Sensations</ProprietaryName>
<ProprietaryNameSuffix>Warming</ProprietaryNameSuffix>
<NonProprietaryName>Benzocaine</NonProprietaryName>
<DosageFormName>LOZENGE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120610</StartMarketingDate>
<EndMarketingDate>20160229</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part356</ApplicationNumber>
<LabelerName>Reckitt Benckiser LLC</LabelerName>
<SubstanceName>BENZOCAINE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2016-03-04</LastUpdate>
</NDC>
<NDC>
<NDCCode>64679-760-04</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (64679-760-04) > 1 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>64679-0760-04</NDC11Code>
<ProductNDC>64679-760</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Promethazine Hcl</ProprietaryName>
<NonProprietaryName>Promethazine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20091223</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040785</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>PROMETHAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC],Phenothiazines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20091223</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Promethazine HCl Injection is indicated for the following conditions: : 1 Amelioration of allergic reactions to blood or plasma., 2 In anaphylaxis as an adjunct to epinephrine and other standard measures after the acute symptoms have been controlled., 3 For other uncomplicated allergic conditions of the immediate type when oral therapy is impossible or contraindicated., 4 For sedation and relief of apprehension and to produce light sleep from which the patient can be easily aroused., 5 Active treatment of motion sickness., 6 Prevention and control of nausea and vomiting associated with certain types of anesthesia and surgery., 7 As an adjunct to analgesics for the control of postoperative pain., 8 Preoperative, postoperative, and obstetric (during labor) sedation., 9 Intravenously in special surgical situations, such as repeated bronchoscopy, ophthalmic surgery, and poor-risk patients, with reduced amounts of meperidine or other narcotic analgesic as an adjunct to anesthesia and analgesia.</IndicationAndUsage>
<Description>Promethazine HCl Injection USP, is a sterile, pyrogen-free solution for deep intramuscular or intravenous administration. Promethazine HCl (10H-Phenothiazine-10 ethanamine,N,N,α-trimethyl-, monohydrochloride, (±)-) is a racemic compound and has the following structural formula:. C17H21ClN2S MW 320.88. Each mL contains Promethazine HCl, either 25 mg or 50 mg with 0.1 mg edetate disodium, 0.04 mg calcium chloride, 0.5 mg sodium metabisulfite in water for injection. The pH range is 4.0 to 5.5; buffered with acetic acid-sodium acetate, and it is sealed under nitrogen. Promethazine HCl Injection is a clear, colorless solution. The product is light sensitive. It should be inspected before use and discarded if either color or particulate is observed.</Description>
</NDC>
<NDC>
<NDCCode>65841-760-10</NDCCode>
<PackageDescription>1000 CAPSULE, DELAYED RELEASE in 1 BOTTLE (65841-760-10) </PackageDescription>
<NDC11Code>65841-0760-10</NDC11Code>
<ProductNDC>65841-760</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omeprazole</ProprietaryName>
<NonProprietaryName>Omeprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121123</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091352</ApplicationNumber>
<LabelerName>Zydus Lifesciences Limited</LabelerName>
<SubstanceName>OMEPRAZOLE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121123</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>65862-760-78</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (65862-760-78) / 10 CAPSULE in 1 BLISTER PACK (65862-760-10) </PackageDescription>
<NDC11Code>65862-0760-78</NDC11Code>
<ProductNDC>65862-760</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230329</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205321</ApplicationNumber>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230329</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsules are indicated for.</IndicationAndUsage>
<Description>Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin USP is a white to off-white powder with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is – 1.35. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin USP, along with corn starch and talc as inactive ingredients. The capsule shells contain gelatin, titanium dioxide, and sodium lauryl sulphate. In addition, 75 mg, 100 mg, 200 mg, 225 mg and 300 mg capsules contain red iron oxide. The imprinting ink contains black iron oxide, potassium hydroxide, propylene glycol, and shellac.</Description>
</NDC>
<NDC>
<NDCCode>68094-760-62</NDCCode>
<PackageDescription>3 TRAY in 1 CASE (68094-760-62) > 10 CUP, UNIT-DOSE in 1 TRAY > 2.5 mL in 1 CUP, UNIT-DOSE (68094-760-59)</PackageDescription>
<NDC11Code>68094-0760-62</NDC11Code>
<ProductNDC>68094-760</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Codeine Sulfate</ProprietaryName>
<NonProprietaryName>Codeine Sulfate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130225</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA202245</ApplicationNumber>
<LabelerName>Precision Dose Inc.</LabelerName>
<SubstanceName>CODEINE SULFATE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/2.5mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2016-01-22</LastUpdate>
</NDC>
<NDC>
<NDCCode>68382-760-10</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (68382-760-10) </PackageDescription>
<NDC11Code>68382-0760-10</NDC11Code>
<ProductNDC>68382-760</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141209</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203686</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141209</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin hydrochloride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin hydrochloride tablets contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below. Metformin hydrochloride, USP is a white crystalline powder with a molecular formula of C4H11N5 HCl and a molecular weight of 165.63. Metformin hydrochloride is freely soluble in water, slightly soluble in alcohol and is practically insoluble in acetone and methylene chloride. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride tablets, USP contain 500 mg or 850 mg or 1,000 mg of metformin hydrochloride, USP. Each tablet contains the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone and sodium starch glycolate. The methodology used for dissolution testing is USP Test 1 for metformin hydrochloride tablets, USP.</Description>
</NDC>
<NDC>
<NDCCode>68462-760-10</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (68462-760-10) / 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>68462-0760-10</NDC11Code>
<ProductNDC>68462-760</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Epinephrine</ProprietaryName>
<NonProprietaryName>Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20250206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219239</ApplicationNumber>
<LabelerName>GLENMARK PHARMACEUTICALS INC., USA</LabelerName>
<SubstanceName>EPINEPHRINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Epinephrine is a non-selective alpha and beta adrenergic agonist indicated: 1 To increase mean arterial blood pressure in adult patients with hypotension associated with septic shock (1.1) , 2 For emergency treatment of allergic reactions (Type 1), including anaphylaxis (1.2) .</IndicationAndUsage>
<Description>Epinephrine Injection, USP is a clear, colorless, sterile solution containing 1 mg/mL epinephrine. 10 mL Multiple-Dose Vial:10 mL multiple-dose amber glass vial containing 10 mg/10 mL (1 mg/mL) epinephrine as a sterile, nonpyrogenic, clear and colorless solution. In the 10 mL vial, each 1 mL of Epinephrine Injection, USP solution contains 1 mg epinephrine, 5.25 mg chlorobutanol hemihydrate as preservative, 7.5 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid for pH adjustment and water for injection. The pH range is 2.2 to 5.0. 30 mL Multiple Dose Vial:. 30 mL multiple dose amber glass vial containing 30 mg/30 mL epinephrine as a sterile, nonpyrogenic, clear and colorless solution. In the 30 mL vial, each 1 mL of Epinephrine Injection USP solution contains 1 mg epinephrine, 5.25 mg chlorobutanol hemihydrate as preservative, 7.5 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid for pH adjustment and water for injection. The pH range is 2.2 to 5.0. Epinephrine is a sympathomimetic catecholamine. The chemical name of epinephrine is: 1,2-Benzenediol, 4-[(1R)-1-hydroxy-2-(methylamino)ethyl]-, or (-)-3,4-Dihydroxy-α-[2- (methylamino)ethyl]benzyl alcohol. The chemical structure of epinephrine is. The molecular weight of epinephrine is 183.2. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin.</Description>
</NDC>
</NDCList>