{
"NDC": [
{
"NDCCode": "73594-9301-2",
"PackageDescription": "5 VIAL in 1 BOX (73594-9301-2) / 1 mL in 1 VIAL (73594-9301-3) ",
"NDC11Code": "73594-9301-02",
"ProductNDC": "73594-9301",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Monoferric",
"NonProprietaryName": "Ferric Derisomaltose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200116",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA208171",
"LabelerName": "Pharmacosmos Therapeutics Inc.",
"SubstanceName": "FERRIC DERISOMALTOSE",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200116",
"SamplePackage": "N",
"IndicationAndUsage": "Monoferric is indicated for the treatment of iron deficiency anemia (IDA) in adult patients: 1 who have intolerance to oral iron or have had unsatisfactory response to oral iron, 2 who have non-hemodialysis dependent chronic kidney disease (NDD-CKD).",
"Description": "Monoferric is an iron replacement product containing ferric derisomaltose for intravenous infusion. Ferric derisomaltose is an iron carbohydrate complex with a matrix structure composed of interchanging layers of ferric hydroxide and the carbohydrate derisomaltose. Derisomaltose consists of linear, hydrogenated isomaltooligosaccharides with an average molecular weight of 1000 Da and a narrow molecular weight distribution that is almost devoid of mono- and disaccharides. Ferric derisomaltose has an average molecular weight of 155,000 Da and has the following empirical formula. {FeO (1-3X) (OH) (1+3X) (C 6H 5O 73-) X}, (H 20) T, -. (C 6H 10O 6) R(-C 6H 10O 5-) Z(C 6H 13O 5) R, (NaCl) Y. X = 0.0311; T = 0.25; R = 0.14; Z = 0.49; Y = 0.14. Iron atoms placed in the electronegative cavities of the 3-D structure between and within the derisomaltose molecules. A schematic representation is presented below. Monoferric is a sterile, dark brown, non-transparent aqueous solution with pH 5.0-7.0, containing ferric derisomaltose dissolved in water for injections and filled into Type I glass vials. Each 1 mL of solution contains 100 mg of elemental iron as ferric derisomaltose in water for injection, hydrochloric acid and sodium hydroxide may be used to adjust pH."
},
{
"NDCCode": "22840-9301-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (22840-9301-2) ",
"NDC11Code": "22840-9301-02",
"ProductNDC": "22840-9301",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "3 Weed Mix",
"NonProprietaryName": "Xanthium Strumarium, Chenopodium Album, Amaranthus Retroflexus",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "CHENOPODIUM ALBUM POLLEN; AMARANTHUS RETROFLEXUS POLLEN; XANTHIUM STRUMARIUM POLLEN",
"StrengthNumber": "13333.333; 13333.333; 13333.333",
"StrengthUnit": "[PNU]/mL; [PNU]/mL; [PNU]/mL",
"Pharm_Classes": "Allergens [CS], Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Pollen [CS], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies. .",
"Description": "Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter."
},
{
"NDCCode": "49442-9301-2",
"PackageDescription": "5 VIAL in 1 BOX (49442-9301-2) > 1 mL in 1 VIAL",
"NDC11Code": "49442-9301-02",
"ProductNDC": "49442-9301",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Monoferric",
"NonProprietaryName": "Ferric Derisomaltose",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200116",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA208171",
"LabelerName": "Pharmacosmos A/S",
"SubstanceName": "FERRIC DERISOMALTOSE",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2020-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20200116",
"SamplePackage": "N"
},
{
"NDCCode": "59535-9301-2",
"PackageDescription": "5 POUCH in 1 PACKAGE (59535-9301-2) > 25 g in 1 POUCH (59535-9301-1)",
"NDC11Code": "59535-9301-02",
"ProductNDC": "59535-9301",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Vitamin A Velvet Mask",
"NonProprietaryName": "Glycerin",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140414",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part347",
"LabelerName": "AMI Cosmetic Co.,Ltd.",
"SubstanceName": "GLYCERIN",
"StrengthNumber": ".06",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2019-04-02",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "68788-9301-2",
"PackageDescription": "20 CAPSULE, DELAYED RELEASE PELLETS in 1 BOTTLE (68788-9301-2) ",
"NDC11Code": "68788-9301-02",
"ProductNDC": "68788-9301",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine",
"ProprietaryNameSuffix": "Delayed-release",
"NonProprietaryName": "Duloxetine Hydrochloride",
"DosageFormName": "CAPSULE, DELAYED RELEASE PELLETS",
"RouteName": "ORAL",
"StartMarketingDate": "20150323",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203088",
"LabelerName": "Preferred Pharmaceuticals, Inc.",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150323",
"SamplePackage": "N",
"IndicationAndUsage": "Duloxetine delayed-release capsules is indicated for the treatment of: 1 Major depressive disorder in adults, 2 Generalized anxiety disorder in adults and pediatric patients 7 years of age and older, 3 Diabetic peripheral neuropathic pain in adults, 4 Fibromyalgia in adults and pediatric patients 13 years of age and older, 5 Chronic musculoskeletal pain in adults.",
"Description": "Duloxetine delayed-release capsules, USP are a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOS∙HCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 20, 30, 40 or 60 mg of duloxetine (equivalent to 22.4, 33.7, 44.9 or 67.3 mg of duloxetine hydrochloride, respectively). These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include ammonium hydroxide, black iron oxide, hypromellose, methacrylic acid copolymer dispersion (methacrylic acid-ethyl acrylate copolymer, polysorbate 80, sodium lauryl sulfate), potassium hydroxide, propylene glycol, shellac, sucrose, sugar spheres (maize starch, sucrose), talc, titanium dioxide, triethylcitrate, and hard gelatin capsules (gelatin, titanium dioxide). The 20 mg hard gelatin capsule colorant is yellow iron oxide. The 30 mg hard gelatin capsule colorants are FD&C Blue No. 1, FD&C Yellow No. 6, and FD&C Yellow No. 10. The 40 mg hard gelatin capsule colorants are FD&C Blue No. 2, red iron oxide, and yellow iron oxide. The 60 mg hard gelatin capsule colorants are FD&C Blue No. 1, FD&C Yellow No. 6, FD&C Yellow No.10, and yellow iron oxide."
},
{
"NDCCode": "0409-9301-30",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (0409-9301-30) / 30 mL in 1 VIAL, SINGLE-DOSE (0409-9301-31) ",
"NDC11Code": "00409-9301-30",
"ProductNDC": "0409-9301",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; PERINEURAL",
"StartMarketingDate": "20140923",
"EndMarketingDate": "20240501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090194",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-05-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20140923",
"EndMarketingDatePackage": "20240501",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine Hydrochloride Injection, USP is indicated for the production of local or regional anesthesia for surgery and for acute pain management.",
"Description": "Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection, USP is administered parenterally by infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W. 328.89. At 25°C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n‑octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.12 mg, 5.3 mg, 7.95 mg, or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2 mg, 5 mg, 7.5 mg, or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg, 7.5 mg, or 7.1 mg of sodium chloride, respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "22840-9301-4",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (22840-9301-4) ",
"NDC11Code": "22840-9301-04",
"ProductNDC": "22840-9301",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "3 Weed Mix",
"NonProprietaryName": "Xanthium Strumarium, Chenopodium Album, Amaranthus Retroflexus",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "CHENOPODIUM ALBUM POLLEN; AMARANTHUS RETROFLEXUS POLLEN; XANTHIUM STRUMARIUM POLLEN",
"StrengthNumber": "13333.333; 13333.333; 13333.333",
"StrengthUnit": "[PNU]/mL; [PNU]/mL; [PNU]/mL",
"Pharm_Classes": "Allergens [CS], Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Pollen [CS], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies. .",
"Description": "Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter."
},
{
"NDCCode": "73594-0101-1",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (73594-0101-1) / 20 mL in 1 VIAL, GLASS",
"NDC11Code": "73594-0101-01",
"ProductNDC": "73594-0101",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cosela",
"NonProprietaryName": "Trilaciclib",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250825",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA214200",
"LabelerName": "Pharmacosmos Therapeutics Inc.",
"SubstanceName": "TRILACICLIB DIHYDROCHLORIDE",
"StrengthNumber": "300",
"StrengthUnit": "mg/20mL",
"Pharm_Classes": "Cyclin-dependent Kinase 4 Inhibitors [MoA], Cyclin-dependent Kinase 6 Inhibitors [MoA], Kinase Inhibitor [EPC], Multidrug and Toxin Extrusion Transporter 1 Inhibitors [MoA], Multidrug and Toxin Extrusion Transporter 2 K Inhibitors [MoA], Organic Cation Transporter 2 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250825",
"SamplePackage": "N",
"IndicationAndUsage": "COSELA is indicated to decrease the incidence of chemotherapy-induced myelosuppression in adult patients when administered prior to a platinum/etoposide-containing regimen or topotecan-containing regimen for extensive-stage small cell lung cancer (ES-SCLC).",
"Description": "COSELA for injection contains trilaciclib dihydrochloride, a kinase inhibitor. The chemical name for trilaciclib is 2'-{[5-(4-methylpiperazin-1-yl)pyridin-2-yl]amino}-7',8'-dihydro-6'H-spiro[cyclohexane-1,9'-pyrazino[1',2':1,5]pyrrolo[2,3-d]pyrimidin]-6'-one. Trilaciclib dihydrochloride is a water-soluble yellow solid, with molecular formula of C24H30N8O2HCl, a molecular weight of 519.48 g/mol (Free base: 446.56 g/mol), and the following chemical structure:. COSELA (trilaciclib) for injection is a sterile, preservative-free, yellow lyophilized cake in a single-dose vial for intravenous infusion after reconstitution and dilution. Each single-dose vial contains the equivalent of 300 mg of trilaciclib (provided as 349 mg of trilaciclib dihydrochloride) and the following inactive ingredients: citric acid monohydrate (75.6 mg) and mannitol (300 mg); hydrochloric acid and sodium hydroxide to adjust pH."
},
{
"NDCCode": "73594-9305-1",
"PackageDescription": "1 VIAL in 1 BOX (73594-9305-1) / 5 mL in 1 VIAL",
"NDC11Code": "73594-9305-01",
"ProductNDC": "73594-9305",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Monoferric",
"NonProprietaryName": "Ferric Derisomaltose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200116",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA208171",
"LabelerName": "Pharmacosmos Therapeutics Inc.",
"SubstanceName": "FERRIC DERISOMALTOSE",
"StrengthNumber": "500",
"StrengthUnit": "mg/5mL",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200116",
"SamplePackage": "N",
"IndicationAndUsage": "Monoferric is indicated for the treatment of iron deficiency anemia (IDA) in adult patients: 1 who have intolerance to oral iron or have had unsatisfactory response to oral iron, 2 who have non-hemodialysis dependent chronic kidney disease (NDD-CKD).",
"Description": "Monoferric is an iron replacement product containing ferric derisomaltose for intravenous infusion. Ferric derisomaltose is an iron carbohydrate complex with a matrix structure composed of interchanging layers of ferric hydroxide and the carbohydrate derisomaltose. Derisomaltose consists of linear, hydrogenated isomaltooligosaccharides with an average molecular weight of 1000 Da and a narrow molecular weight distribution that is almost devoid of mono- and disaccharides. Ferric derisomaltose has an average molecular weight of 155,000 Da and has the following empirical formula. {FeO (1-3X) (OH) (1+3X) (C 6H 5O 73-) X}, (H 20) T, -. (C 6H 10O 6) R(-C 6H 10O 5-) Z(C 6H 13O 5) R, (NaCl) Y. X = 0.0311; T = 0.25; R = 0.14; Z = 0.49; Y = 0.14. Iron atoms placed in the electronegative cavities of the 3-D structure between and within the derisomaltose molecules. A schematic representation is presented below. Monoferric is a sterile, dark brown, non-transparent aqueous solution with pH 5.0-7.0, containing ferric derisomaltose dissolved in water for injections and filled into Type I glass vials. Each 1 mL of solution contains 100 mg of elemental iron as ferric derisomaltose in water for injection, hydrochloric acid and sodium hydroxide may be used to adjust pH."
},
{
"NDCCode": "73594-9310-1",
"PackageDescription": "1 VIAL in 1 BOX (73594-9310-1) / 10 mL in 1 VIAL",
"NDC11Code": "73594-9310-01",
"ProductNDC": "73594-9310",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Monoferric",
"NonProprietaryName": "Ferric Derisomaltose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200116",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA208171",
"LabelerName": "Pharmacosmos Therapeutics Inc.",
"SubstanceName": "FERRIC DERISOMALTOSE",
"StrengthNumber": "1000",
"StrengthUnit": "mg/10mL",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200116",
"SamplePackage": "N",
"IndicationAndUsage": "Monoferric is indicated for the treatment of iron deficiency anemia (IDA) in adult patients: 1 who have intolerance to oral iron or have had unsatisfactory response to oral iron, 2 who have non-hemodialysis dependent chronic kidney disease (NDD-CKD).",
"Description": "Monoferric is an iron replacement product containing ferric derisomaltose for intravenous infusion. Ferric derisomaltose is an iron carbohydrate complex with a matrix structure composed of interchanging layers of ferric hydroxide and the carbohydrate derisomaltose. Derisomaltose consists of linear, hydrogenated isomaltooligosaccharides with an average molecular weight of 1000 Da and a narrow molecular weight distribution that is almost devoid of mono- and disaccharides. Ferric derisomaltose has an average molecular weight of 155,000 Da and has the following empirical formula. {FeO (1-3X) (OH) (1+3X) (C 6H 5O 73-) X}, (H 20) T, -. (C 6H 10O 6) R(-C 6H 10O 5-) Z(C 6H 13O 5) R, (NaCl) Y. X = 0.0311; T = 0.25; R = 0.14; Z = 0.49; Y = 0.14. Iron atoms placed in the electronegative cavities of the 3-D structure between and within the derisomaltose molecules. A schematic representation is presented below. Monoferric is a sterile, dark brown, non-transparent aqueous solution with pH 5.0-7.0, containing ferric derisomaltose dissolved in water for injections and filled into Type I glass vials. Each 1 mL of solution contains 100 mg of elemental iron as ferric derisomaltose in water for injection, hydrochloric acid and sodium hydroxide may be used to adjust pH."
},
{
"NDCCode": "0031-9301-01",
"PackageDescription": "18 TABLET, COATED in 1 BOTTLE (0031-9301-01) ",
"NDC11Code": "00031-9301-01",
"ProductNDC": "0031-9301",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Robitussin Direct Sore Throat Pain",
"NonProprietaryName": "Acetaminophen",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220715",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M012",
"LabelerName": "Haleon US Holdings LLC",
"SubstanceName": "ACETAMINOPHEN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2024-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220715",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves minor aches and pains due to:. sore throat. headache. backache. toothache. premenstrual and menstrual cramps. the common cold. minor pain of arthritis. muscular aches. temporarily reduces fever."
},
{
"NDCCode": "0420-9301-01",
"PackageDescription": "1440 TRAY in 1 BOX (0420-9301-01) / 160 SYRINGE in 1 TRAY / .5 mL in 1 SYRINGE",
"NDC11Code": "00420-9301-01",
"ProductNDC": "0420-9301",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Semaglutide",
"DosageFormName": "INJECTION, SOLUTION",
"StartMarketingDate": "20260507",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Novo Nordisk A/S",
"SubstanceName": "SEMAGLUTIDE",
"StrengthNumber": ".25",
"StrengthUnit": "mg/.5mL",
"Status": "Unfinished",
"LastUpdate": "2026-05-11",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "07-MAY-26"
},
{
"NDCCode": "0487-9301-03",
"PackageDescription": "100 VIAL, SINGLE-USE in 1 CARTON (0487-9301-03) > 3 mL in 1 VIAL, SINGLE-USE",
"NDC11Code": "00487-9301-03",
"ProductNDC": "0487-9301",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Isodium Chloride",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20020718",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Nephron Pharmaceuticals Corporation",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": ".027",
"StrengthUnit": "mg/3mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "0487-9301-33",
"PackageDescription": "30 POUCH in 1 CARTON (0487-9301-33) > 1 VIAL, SINGLE-USE in 1 POUCH > 3 mL in 1 VIAL, SINGLE-USE",
"NDC11Code": "00487-9301-33",
"ProductNDC": "0487-9301",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Isodium Chloride",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20020718",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Nephron Pharmaceuticals Corporation",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": ".027",
"StrengthUnit": "mg/3mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "29500-9301-5",
"PackageDescription": "221.8 mL in 1 BOTTLE, PUMP (29500-9301-5)",
"NDC11Code": "29500-9301-05",
"ProductNDC": "29500-9301",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Personal Care Antibacterial Hand",
"ProprietaryNameSuffix": "Coconut Ginger",
"NonProprietaryName": "Chloroxylenol",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20150801",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "Personal Care Products, LLC",
"SubstanceName": "CHLOROXYLENOL",
"StrengthNumber": ".6657",
"StrengthUnit": "mg/221.8mL",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "for hand washing to decrease bacteria on the skin."
},
{
"NDCCode": "48951-9301-1",
"PackageDescription": "8 AMPULE in 1 BOX (48951-9301-1) / 1 mL in 1 AMPULE",
"NDC11Code": "48951-9301-01",
"ProductNDC": "48951-9301",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Viscum Abietis 1",
"NonProprietaryName": "Viscum Abietis 1",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20140801",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Uriel Pharmacy Inc.",
"SubstanceName": "VISCUM ALBUM FRUITING TOP",
"StrengthNumber": "3",
"StrengthUnit": "[hp_X]/mL",
"Status": "Active",
"LastUpdate": "2026-01-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140801",
"SamplePackage": "N",
"IndicationAndUsage": "FOR ORAL USE ONLY."
},
{
"NDCCode": "59267-9301-1",
"PackageDescription": "50000 mL in 1 DRUM (59267-9301-1)",
"NDC11Code": "59267-9301-01",
"ProductNDC": "59267-9301",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Pegvisomant",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"StartMarketingDate": "20130311",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Pfizer Manufacturing Belgium NV",
"SubstanceName": "PEGVISOMANT",
"StrengthNumber": "15",
"StrengthUnit": "mg/mL",
"Status": "Unfinished",
"LastUpdate": "2019-01-12",
"ListingRecordCertifiedThrough": "20201231"
},
{
"NDCCode": "61589-9301-7",
"PackageDescription": "1 TUBE in 1 CARTON (61589-9301-7) / 50 g in 1 TUBE",
"NDC11Code": "61589-9301-07",
"ProductNDC": "61589-9301",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "No7 Future Renew Defense Shield Spf 50",
"NonProprietaryName": "Avobenzone, Octinoxate, Octisalate",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20250722",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "BCMC",
"SubstanceName": "AVOBENZONE; OCTINOXATE; OCTISALATE",
"StrengthNumber": "3; 6.993; 4.5",
"StrengthUnit": "g/50g; g/50g; g/50g",
"Status": "Deprecated",
"LastUpdate": "2026-09-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251104",
"SamplePackage": "N",
"IndicationAndUsage": "Uses - helps prevent sunburn."
},
{
"NDCCode": "63629-9301-1",
"PackageDescription": "100 TABLET, EXTENDED RELEASE in 1 BOTTLE (63629-9301-1) ",
"NDC11Code": "63629-9301-01",
"ProductNDC": "63629-9301",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Felodipine",
"NonProprietaryName": "Felodipine",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20200812",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210847",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "FELODIPINE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20220606",
"SamplePackage": "N",
"IndicationAndUsage": "Felodipine Extended-release Tablets, USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including felodipine. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (eg, on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Felodipine Extended-release Tablets, USP may be administered with other antihypertensive agents.",
"Description": "Felodipine is a calcium antagonist (calcium channel blocker). Felodipine is a dihydropyridine derivative that is chemically described as ± ethyl methyl 4-(2,3-dichlorophenyl) -1,4-dihydro-2, 6-dimethyl-3, 5- pyridinedicarboxylate. Its empirical formula is C 18H 19Cl 2NO 4 and its structural formula is:. Felodipine is a slightly yellowish, crystalline powder with a molecular weight of 384.26. It is insoluble in water and is freely soluble in dichloromethane and ethanol. Felodipine is a racemic mixture. Felodipine Extended-release Tablets, USP provide extended release of felodipine. They are available as tablets containing 2.5 mg, 5 mg, or 10 mg of felodipine for oral administration. Inactive ingredients for core tablets are: anhydrous lactose, butylated hydroxyanisole, butylated hydroxytoluene, colloidal silicon dioxide, hypromellose, polyoxyl 40 hydrogenated castor oil, microcrystalline cellulose, povidone K30 and sodium stearyl fumarate. Film coating materials of 2.5mg: ferrosoferric oxide, hypromellose, iron oxide red, iron oxide yellow, maltodextrin, medium chain triglycerides, polydextrose, talc and titanium dioxide. Film coating materials of 5mg: ferrosoferric oxide, hypromellose, iron oxide red, iron oxide yellow, maltodextrin, medium chain triglycerides, polydextrose, talc and titanium dioxide. Film coating materials of 10mg: ferrosoferric oxide, hypromellose, iron oxide red, iron oxide yellow, maltodextrin, medium chain triglycerides, polydextrose, talc and titanium dioxide."
},
{
"NDCCode": "68788-9301-0",
"PackageDescription": "6 CAPSULE, DELAYED RELEASE PELLETS in 1 BOTTLE (68788-9301-0) ",
"NDC11Code": "68788-9301-00",
"ProductNDC": "68788-9301",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine",
"ProprietaryNameSuffix": "Delayed-release",
"NonProprietaryName": "Duloxetine Hydrochloride",
"DosageFormName": "CAPSULE, DELAYED RELEASE PELLETS",
"RouteName": "ORAL",
"StartMarketingDate": "20150323",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203088",
"LabelerName": "Preferred Pharmaceuticals, Inc.",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150323",
"SamplePackage": "N",
"IndicationAndUsage": "Duloxetine delayed-release capsules is indicated for the treatment of: 1 Major depressive disorder in adults, 2 Generalized anxiety disorder in adults and pediatric patients 7 years of age and older, 3 Diabetic peripheral neuropathic pain in adults, 4 Fibromyalgia in adults and pediatric patients 13 years of age and older, 5 Chronic musculoskeletal pain in adults.",
"Description": "Duloxetine delayed-release capsules, USP are a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOS∙HCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 20, 30, 40 or 60 mg of duloxetine (equivalent to 22.4, 33.7, 44.9 or 67.3 mg of duloxetine hydrochloride, respectively). These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include ammonium hydroxide, black iron oxide, hypromellose, methacrylic acid copolymer dispersion (methacrylic acid-ethyl acrylate copolymer, polysorbate 80, sodium lauryl sulfate), potassium hydroxide, propylene glycol, shellac, sucrose, sugar spheres (maize starch, sucrose), talc, titanium dioxide, triethylcitrate, and hard gelatin capsules (gelatin, titanium dioxide). The 20 mg hard gelatin capsule colorant is yellow iron oxide. The 30 mg hard gelatin capsule colorants are FD&C Blue No. 1, FD&C Yellow No. 6, and FD&C Yellow No. 10. The 40 mg hard gelatin capsule colorants are FD&C Blue No. 2, red iron oxide, and yellow iron oxide. The 60 mg hard gelatin capsule colorants are FD&C Blue No. 1, FD&C Yellow No. 6, FD&C Yellow No.10, and yellow iron oxide."
},
{
"NDCCode": "68788-9301-1",
"PackageDescription": "10 CAPSULE, DELAYED RELEASE PELLETS in 1 BOTTLE (68788-9301-1) ",
"NDC11Code": "68788-9301-01",
"ProductNDC": "68788-9301",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine",
"ProprietaryNameSuffix": "Delayed-release",
"NonProprietaryName": "Duloxetine Hydrochloride",
"DosageFormName": "CAPSULE, DELAYED RELEASE PELLETS",
"RouteName": "ORAL",
"StartMarketingDate": "20150323",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203088",
"LabelerName": "Preferred Pharmaceuticals, Inc.",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150323",
"SamplePackage": "N",
"IndicationAndUsage": "Duloxetine delayed-release capsules is indicated for the treatment of: 1 Major depressive disorder in adults, 2 Generalized anxiety disorder in adults and pediatric patients 7 years of age and older, 3 Diabetic peripheral neuropathic pain in adults, 4 Fibromyalgia in adults and pediatric patients 13 years of age and older, 5 Chronic musculoskeletal pain in adults.",
"Description": "Duloxetine delayed-release capsules, USP are a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOS∙HCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 20, 30, 40 or 60 mg of duloxetine (equivalent to 22.4, 33.7, 44.9 or 67.3 mg of duloxetine hydrochloride, respectively). These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include ammonium hydroxide, black iron oxide, hypromellose, methacrylic acid copolymer dispersion (methacrylic acid-ethyl acrylate copolymer, polysorbate 80, sodium lauryl sulfate), potassium hydroxide, propylene glycol, shellac, sucrose, sugar spheres (maize starch, sucrose), talc, titanium dioxide, triethylcitrate, and hard gelatin capsules (gelatin, titanium dioxide). The 20 mg hard gelatin capsule colorant is yellow iron oxide. The 30 mg hard gelatin capsule colorants are FD&C Blue No. 1, FD&C Yellow No. 6, and FD&C Yellow No. 10. The 40 mg hard gelatin capsule colorants are FD&C Blue No. 2, red iron oxide, and yellow iron oxide. The 60 mg hard gelatin capsule colorants are FD&C Blue No. 1, FD&C Yellow No. 6, FD&C Yellow No.10, and yellow iron oxide."
},
{
"NDCCode": "68788-9301-3",
"PackageDescription": "30 CAPSULE, DELAYED RELEASE PELLETS in 1 BOTTLE (68788-9301-3) ",
"NDC11Code": "68788-9301-03",
"ProductNDC": "68788-9301",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine",
"ProprietaryNameSuffix": "Delayed-release",
"NonProprietaryName": "Duloxetine Hydrochloride",
"DosageFormName": "CAPSULE, DELAYED RELEASE PELLETS",
"RouteName": "ORAL",
"StartMarketingDate": "20150323",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203088",
"LabelerName": "Preferred Pharmaceuticals, Inc.",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150323",
"SamplePackage": "N",
"IndicationAndUsage": "Duloxetine delayed-release capsules is indicated for the treatment of: 1 Major depressive disorder in adults, 2 Generalized anxiety disorder in adults and pediatric patients 7 years of age and older, 3 Diabetic peripheral neuropathic pain in adults, 4 Fibromyalgia in adults and pediatric patients 13 years of age and older, 5 Chronic musculoskeletal pain in adults.",
"Description": "Duloxetine delayed-release capsules, USP are a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOS∙HCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 20, 30, 40 or 60 mg of duloxetine (equivalent to 22.4, 33.7, 44.9 or 67.3 mg of duloxetine hydrochloride, respectively). These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include ammonium hydroxide, black iron oxide, hypromellose, methacrylic acid copolymer dispersion (methacrylic acid-ethyl acrylate copolymer, polysorbate 80, sodium lauryl sulfate), potassium hydroxide, propylene glycol, shellac, sucrose, sugar spheres (maize starch, sucrose), talc, titanium dioxide, triethylcitrate, and hard gelatin capsules (gelatin, titanium dioxide). The 20 mg hard gelatin capsule colorant is yellow iron oxide. The 30 mg hard gelatin capsule colorants are FD&C Blue No. 1, FD&C Yellow No. 6, and FD&C Yellow No. 10. The 40 mg hard gelatin capsule colorants are FD&C Blue No. 2, red iron oxide, and yellow iron oxide. The 60 mg hard gelatin capsule colorants are FD&C Blue No. 1, FD&C Yellow No. 6, FD&C Yellow No.10, and yellow iron oxide."
},
{
"NDCCode": "68788-9301-6",
"PackageDescription": "60 CAPSULE, DELAYED RELEASE PELLETS in 1 BOTTLE (68788-9301-6) ",
"NDC11Code": "68788-9301-06",
"ProductNDC": "68788-9301",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine",
"ProprietaryNameSuffix": "Delayed-release",
"NonProprietaryName": "Duloxetine Hydrochloride",
"DosageFormName": "CAPSULE, DELAYED RELEASE PELLETS",
"RouteName": "ORAL",
"StartMarketingDate": "20150323",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203088",
"LabelerName": "Preferred Pharmaceuticals, Inc.",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150323",
"SamplePackage": "N",
"IndicationAndUsage": "Duloxetine delayed-release capsules is indicated for the treatment of: 1 Major depressive disorder in adults, 2 Generalized anxiety disorder in adults and pediatric patients 7 years of age and older, 3 Diabetic peripheral neuropathic pain in adults, 4 Fibromyalgia in adults and pediatric patients 13 years of age and older, 5 Chronic musculoskeletal pain in adults.",
"Description": "Duloxetine delayed-release capsules, USP are a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOS∙HCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 20, 30, 40 or 60 mg of duloxetine (equivalent to 22.4, 33.7, 44.9 or 67.3 mg of duloxetine hydrochloride, respectively). These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include ammonium hydroxide, black iron oxide, hypromellose, methacrylic acid copolymer dispersion (methacrylic acid-ethyl acrylate copolymer, polysorbate 80, sodium lauryl sulfate), potassium hydroxide, propylene glycol, shellac, sucrose, sugar spheres (maize starch, sucrose), talc, titanium dioxide, triethylcitrate, and hard gelatin capsules (gelatin, titanium dioxide). The 20 mg hard gelatin capsule colorant is yellow iron oxide. The 30 mg hard gelatin capsule colorants are FD&C Blue No. 1, FD&C Yellow No. 6, and FD&C Yellow No. 10. The 40 mg hard gelatin capsule colorants are FD&C Blue No. 2, red iron oxide, and yellow iron oxide. The 60 mg hard gelatin capsule colorants are FD&C Blue No. 1, FD&C Yellow No. 6, FD&C Yellow No.10, and yellow iron oxide."
},
{
"NDCCode": "68788-9301-9",
"PackageDescription": "90 CAPSULE, DELAYED RELEASE PELLETS in 1 BOTTLE (68788-9301-9) ",
"NDC11Code": "68788-9301-09",
"ProductNDC": "68788-9301",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine",
"ProprietaryNameSuffix": "Delayed-release",
"NonProprietaryName": "Duloxetine Hydrochloride",
"DosageFormName": "CAPSULE, DELAYED RELEASE PELLETS",
"RouteName": "ORAL",
"StartMarketingDate": "20150323",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203088",
"LabelerName": "Preferred Pharmaceuticals, Inc.",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150323",
"SamplePackage": "N",
"IndicationAndUsage": "Duloxetine delayed-release capsules is indicated for the treatment of: 1 Major depressive disorder in adults, 2 Generalized anxiety disorder in adults and pediatric patients 7 years of age and older, 3 Diabetic peripheral neuropathic pain in adults, 4 Fibromyalgia in adults and pediatric patients 13 years of age and older, 5 Chronic musculoskeletal pain in adults.",
"Description": "Duloxetine delayed-release capsules, USP are a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOS∙HCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 20, 30, 40 or 60 mg of duloxetine (equivalent to 22.4, 33.7, 44.9 or 67.3 mg of duloxetine hydrochloride, respectively). These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include ammonium hydroxide, black iron oxide, hypromellose, methacrylic acid copolymer dispersion (methacrylic acid-ethyl acrylate copolymer, polysorbate 80, sodium lauryl sulfate), potassium hydroxide, propylene glycol, shellac, sucrose, sugar spheres (maize starch, sucrose), talc, titanium dioxide, triethylcitrate, and hard gelatin capsules (gelatin, titanium dioxide). The 20 mg hard gelatin capsule colorant is yellow iron oxide. The 30 mg hard gelatin capsule colorants are FD&C Blue No. 1, FD&C Yellow No. 6, and FD&C Yellow No. 10. The 40 mg hard gelatin capsule colorants are FD&C Blue No. 2, red iron oxide, and yellow iron oxide. The 60 mg hard gelatin capsule colorants are FD&C Blue No. 1, FD&C Yellow No. 6, FD&C Yellow No.10, and yellow iron oxide."
},
{
"NDCCode": "75857-9301-6",
"PackageDescription": "473 mL in 1 BOTTLE (75857-9301-6)",
"NDC11Code": "75857-9301-06",
"ProductNDC": "75857-9301",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Spf 30 Sunscreen",
"NonProprietaryName": "Octinoxate, Octisalate, Oxybenzone, Titanium Dioxide",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140108",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Ningbo Dowland Daily Health Co., Ltd",
"SubstanceName": "OCTINOXATE; OCTISALATE; OXYBENZONE; TITANIUM DIOXIDE",
"StrengthNumber": "75; 20; 40; 25",
"StrengthUnit": "mg/mL; mg/mL; mg/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2017-02-07"
},
{
"NDCCode": "87849-9301-7",
"PackageDescription": "1 CARTON in 1 BOX (87849-9301-7) / 1 TUBE in 1 CARTON / 50 g in 1 TUBE",
"NDC11Code": "87849-9301-07",
"ProductNDC": "87849-9301",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "No7 Future Renew Defense Shield Spf 50",
"NonProprietaryName": "Avobenzone, Octinoxate, Octisalate",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20250701",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "Xact Packing Limited",
"SubstanceName": "AVOBENZONE; OCTINOXATE; OCTISALATE",
"StrengthNumber": "3; 6.993; 4.5",
"StrengthUnit": "g/50g; g/50g; g/50g",
"Status": "Active",
"LastUpdate": "2026-08-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260701",
"SamplePackage": "N",
"IndicationAndUsage": "Uses - helps prevent sunburn."
},
{
"NDCCode": "0002-0152-01",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (0002-0152-01) / .5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00002-0152-01",
"ProductNDC": "0002-0152",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zepbound",
"NonProprietaryName": "Tirzepatide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20240328",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA217806",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "TIRZEPATIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/.5mL",
"Pharm_Classes": "G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240328",
"SamplePackage": "N",
"IndicationAndUsage": "ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .",
"Description": "ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming."
},
{
"NDCCode": "0002-0152-04",
"PackageDescription": "4 VIAL, SINGLE-DOSE in 1 CARTON (0002-0152-04) / .5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00002-0152-04",
"ProductNDC": "0002-0152",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zepbound",
"NonProprietaryName": "Tirzepatide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20240328",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA217806",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "TIRZEPATIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/.5mL",
"Pharm_Classes": "G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240808",
"SamplePackage": "N",
"IndicationAndUsage": "ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .",
"Description": "ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming."
},
{
"NDCCode": "0002-0152-61",
"PackageDescription": "4 VIAL, SINGLE-DOSE in 1 CARTON (0002-0152-61) / .5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00002-0152-61",
"ProductNDC": "0002-0152",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zepbound",
"NonProprietaryName": "Tirzepatide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20240328",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA217806",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "TIRZEPATIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/.5mL",
"Pharm_Classes": "G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250501",
"SamplePackage": "Y",
"IndicationAndUsage": "ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .",
"Description": "ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming."
},
{
"NDCCode": "0002-0213-01",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0002-0213-01) / 3 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00002-0213-01",
"ProductNDC": "0002-0213",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Humulin",
"ProprietaryNameSuffix": "R",
"NonProprietaryName": "Insulin Human",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PARENTERAL",
"StartMarketingDate": "19830627",
"EndMarketingDate": "20261215",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA018780",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN HUMAN",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin [CS], Insulin [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20230620",
"EndMarketingDatePackage": "20261215",
"SamplePackage": "N",
"IndicationAndUsage": "HUMULIN R is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin human is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli and has the empirical formula C257H383N65O77S6 with a molecular weight of 5.808 kDa. HUMULIN R (insulin human) injection is a short-acting human insulin for subcutaneous or intravenous use. HUMULIN R is a sterile, aqueous, clear, and colorless solution. HUMULIN R contains 100 units of insulin human in each milliliter. Each milliliter of HUMULIN R also contains glycerin (16 mg), metacresol (2.5 mg), endogenous zinc (approximately 0.015 mg/100 units,) and Water for Injection. Sodium hydroxide and hydrochloric acid may be added during manufacture to adjust the pH. The pH is 7.0 to 7.8."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>73594-9301-2</NDCCode>
<PackageDescription>5 VIAL in 1 BOX (73594-9301-2) / 1 mL in 1 VIAL (73594-9301-3) </PackageDescription>
<NDC11Code>73594-9301-02</NDC11Code>
<ProductNDC>73594-9301</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Monoferric</ProprietaryName>
<NonProprietaryName>Ferric Derisomaltose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200116</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA208171</ApplicationNumber>
<LabelerName>Pharmacosmos Therapeutics Inc.</LabelerName>
<SubstanceName>FERRIC DERISOMALTOSE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200116</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Monoferric is indicated for the treatment of iron deficiency anemia (IDA) in adult patients: 1 who have intolerance to oral iron or have had unsatisfactory response to oral iron, 2 who have non-hemodialysis dependent chronic kidney disease (NDD-CKD).</IndicationAndUsage>
<Description>Monoferric is an iron replacement product containing ferric derisomaltose for intravenous infusion. Ferric derisomaltose is an iron carbohydrate complex with a matrix structure composed of interchanging layers of ferric hydroxide and the carbohydrate derisomaltose. Derisomaltose consists of linear, hydrogenated isomaltooligosaccharides with an average molecular weight of 1000 Da and a narrow molecular weight distribution that is almost devoid of mono- and disaccharides. Ferric derisomaltose has an average molecular weight of 155,000 Da and has the following empirical formula. {FeO (1-3X) (OH) (1+3X) (C 6H 5O 73-) X}, (H 20) T, -. (C 6H 10O 6) R(-C 6H 10O 5-) Z(C 6H 13O 5) R, (NaCl) Y. X = 0.0311; T = 0.25; R = 0.14; Z = 0.49; Y = 0.14. Iron atoms placed in the electronegative cavities of the 3-D structure between and within the derisomaltose molecules. A schematic representation is presented below. Monoferric is a sterile, dark brown, non-transparent aqueous solution with pH 5.0-7.0, containing ferric derisomaltose dissolved in water for injections and filled into Type I glass vials. Each 1 mL of solution contains 100 mg of elemental iron as ferric derisomaltose in water for injection, hydrochloric acid and sodium hydroxide may be used to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>22840-9301-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (22840-9301-2) </PackageDescription>
<NDC11Code>22840-9301-02</NDC11Code>
<ProductNDC>22840-9301</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>3 Weed Mix</ProprietaryName>
<NonProprietaryName>Xanthium Strumarium, Chenopodium Album, Amaranthus Retroflexus</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>CHENOPODIUM ALBUM POLLEN; AMARANTHUS RETROFLEXUS POLLEN; XANTHIUM STRUMARIUM POLLEN</SubstanceName>
<StrengthNumber>13333.333; 13333.333; 13333.333</StrengthNumber>
<StrengthUnit>[PNU]/mL; [PNU]/mL; [PNU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Pollen [CS], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies. .</IndicationAndUsage>
<Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
</NDC>
<NDC>
<NDCCode>49442-9301-2</NDCCode>
<PackageDescription>5 VIAL in 1 BOX (49442-9301-2) > 1 mL in 1 VIAL</PackageDescription>
<NDC11Code>49442-9301-02</NDC11Code>
<ProductNDC>49442-9301</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Monoferric</ProprietaryName>
<NonProprietaryName>Ferric Derisomaltose</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200116</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA208171</ApplicationNumber>
<LabelerName>Pharmacosmos A/S</LabelerName>
<SubstanceName>FERRIC DERISOMALTOSE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200116</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>59535-9301-2</NDCCode>
<PackageDescription>5 POUCH in 1 PACKAGE (59535-9301-2) > 25 g in 1 POUCH (59535-9301-1)</PackageDescription>
<NDC11Code>59535-9301-02</NDC11Code>
<ProductNDC>59535-9301</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Vitamin A Velvet Mask</ProprietaryName>
<NonProprietaryName>Glycerin</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140414</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part347</ApplicationNumber>
<LabelerName>AMI Cosmetic Co.,Ltd.</LabelerName>
<SubstanceName>GLYCERIN</SubstanceName>
<StrengthNumber>.06</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-04-02</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>68788-9301-2</NDCCode>
<PackageDescription>20 CAPSULE, DELAYED RELEASE PELLETS in 1 BOTTLE (68788-9301-2) </PackageDescription>
<NDC11Code>68788-9301-02</NDC11Code>
<ProductNDC>68788-9301</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine</ProprietaryName>
<ProprietaryNameSuffix>Delayed-release</ProprietaryNameSuffix>
<NonProprietaryName>Duloxetine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE PELLETS</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150323</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203088</ApplicationNumber>
<LabelerName>Preferred Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150323</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Duloxetine delayed-release capsules is indicated for the treatment of: 1 Major depressive disorder in adults, 2 Generalized anxiety disorder in adults and pediatric patients 7 years of age and older, 3 Diabetic peripheral neuropathic pain in adults, 4 Fibromyalgia in adults and pediatric patients 13 years of age and older, 5 Chronic musculoskeletal pain in adults.</IndicationAndUsage>
<Description>Duloxetine delayed-release capsules, USP are a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOS∙HCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 20, 30, 40 or 60 mg of duloxetine (equivalent to 22.4, 33.7, 44.9 or 67.3 mg of duloxetine hydrochloride, respectively). These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include ammonium hydroxide, black iron oxide, hypromellose, methacrylic acid copolymer dispersion (methacrylic acid-ethyl acrylate copolymer, polysorbate 80, sodium lauryl sulfate), potassium hydroxide, propylene glycol, shellac, sucrose, sugar spheres (maize starch, sucrose), talc, titanium dioxide, triethylcitrate, and hard gelatin capsules (gelatin, titanium dioxide). The 20 mg hard gelatin capsule colorant is yellow iron oxide. The 30 mg hard gelatin capsule colorants are FD&C Blue No. 1, FD&C Yellow No. 6, and FD&C Yellow No. 10. The 40 mg hard gelatin capsule colorants are FD&C Blue No. 2, red iron oxide, and yellow iron oxide. The 60 mg hard gelatin capsule colorants are FD&C Blue No. 1, FD&C Yellow No. 6, FD&C Yellow No.10, and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>0409-9301-30</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (0409-9301-30) / 30 mL in 1 VIAL, SINGLE-DOSE (0409-9301-31) </PackageDescription>
<NDC11Code>00409-9301-30</NDC11Code>
<ProductNDC>0409-9301</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20140923</StartMarketingDate>
<EndMarketingDate>20240501</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090194</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-05-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20140923</StartMarketingDatePackage>
<EndMarketingDatePackage>20240501</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine Hydrochloride Injection, USP is indicated for the production of local or regional anesthesia for surgery and for acute pain management.</IndicationAndUsage>
<Description>Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection, USP is administered parenterally by infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W. 328.89. At 25°C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n‑octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.12 mg, 5.3 mg, 7.95 mg, or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2 mg, 5 mg, 7.5 mg, or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg, 7.5 mg, or 7.1 mg of sodium chloride, respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>22840-9301-4</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-9301-4) </PackageDescription>
<NDC11Code>22840-9301-04</NDC11Code>
<ProductNDC>22840-9301</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>3 Weed Mix</ProprietaryName>
<NonProprietaryName>Xanthium Strumarium, Chenopodium Album, Amaranthus Retroflexus</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>CHENOPODIUM ALBUM POLLEN; AMARANTHUS RETROFLEXUS POLLEN; XANTHIUM STRUMARIUM POLLEN</SubstanceName>
<StrengthNumber>13333.333; 13333.333; 13333.333</StrengthNumber>
<StrengthUnit>[PNU]/mL; [PNU]/mL; [PNU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS], Pollen [CS], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies. .</IndicationAndUsage>
<Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
</NDC>
<NDC>
<NDCCode>73594-0101-1</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (73594-0101-1) / 20 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>73594-0101-01</NDC11Code>
<ProductNDC>73594-0101</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cosela</ProprietaryName>
<NonProprietaryName>Trilaciclib</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250825</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA214200</ApplicationNumber>
<LabelerName>Pharmacosmos Therapeutics Inc.</LabelerName>
<SubstanceName>TRILACICLIB DIHYDROCHLORIDE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/20mL</StrengthUnit>
<Pharm_Classes>Cyclin-dependent Kinase 4 Inhibitors [MoA], Cyclin-dependent Kinase 6 Inhibitors [MoA], Kinase Inhibitor [EPC], Multidrug and Toxin Extrusion Transporter 1 Inhibitors [MoA], Multidrug and Toxin Extrusion Transporter 2 K Inhibitors [MoA], Organic Cation Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250825</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>COSELA is indicated to decrease the incidence of chemotherapy-induced myelosuppression in adult patients when administered prior to a platinum/etoposide-containing regimen or topotecan-containing regimen for extensive-stage small cell lung cancer (ES-SCLC).</IndicationAndUsage>
<Description>COSELA for injection contains trilaciclib dihydrochloride, a kinase inhibitor. The chemical name for trilaciclib is 2'-{[5-(4-methylpiperazin-1-yl)pyridin-2-yl]amino}-7',8'-dihydro-6'H-spiro[cyclohexane-1,9'-pyrazino[1',2':1,5]pyrrolo[2,3-d]pyrimidin]-6'-one. Trilaciclib dihydrochloride is a water-soluble yellow solid, with molecular formula of C24H30N8O2HCl, a molecular weight of 519.48 g/mol (Free base: 446.56 g/mol), and the following chemical structure:. COSELA (trilaciclib) for injection is a sterile, preservative-free, yellow lyophilized cake in a single-dose vial for intravenous infusion after reconstitution and dilution. Each single-dose vial contains the equivalent of 300 mg of trilaciclib (provided as 349 mg of trilaciclib dihydrochloride) and the following inactive ingredients: citric acid monohydrate (75.6 mg) and mannitol (300 mg); hydrochloric acid and sodium hydroxide to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>73594-9305-1</NDCCode>
<PackageDescription>1 VIAL in 1 BOX (73594-9305-1) / 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>73594-9305-01</NDC11Code>
<ProductNDC>73594-9305</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Monoferric</ProprietaryName>
<NonProprietaryName>Ferric Derisomaltose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200116</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA208171</ApplicationNumber>
<LabelerName>Pharmacosmos Therapeutics Inc.</LabelerName>
<SubstanceName>FERRIC DERISOMALTOSE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200116</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Monoferric is indicated for the treatment of iron deficiency anemia (IDA) in adult patients: 1 who have intolerance to oral iron or have had unsatisfactory response to oral iron, 2 who have non-hemodialysis dependent chronic kidney disease (NDD-CKD).</IndicationAndUsage>
<Description>Monoferric is an iron replacement product containing ferric derisomaltose for intravenous infusion. Ferric derisomaltose is an iron carbohydrate complex with a matrix structure composed of interchanging layers of ferric hydroxide and the carbohydrate derisomaltose. Derisomaltose consists of linear, hydrogenated isomaltooligosaccharides with an average molecular weight of 1000 Da and a narrow molecular weight distribution that is almost devoid of mono- and disaccharides. Ferric derisomaltose has an average molecular weight of 155,000 Da and has the following empirical formula. {FeO (1-3X) (OH) (1+3X) (C 6H 5O 73-) X}, (H 20) T, -. (C 6H 10O 6) R(-C 6H 10O 5-) Z(C 6H 13O 5) R, (NaCl) Y. X = 0.0311; T = 0.25; R = 0.14; Z = 0.49; Y = 0.14. Iron atoms placed in the electronegative cavities of the 3-D structure between and within the derisomaltose molecules. A schematic representation is presented below. Monoferric is a sterile, dark brown, non-transparent aqueous solution with pH 5.0-7.0, containing ferric derisomaltose dissolved in water for injections and filled into Type I glass vials. Each 1 mL of solution contains 100 mg of elemental iron as ferric derisomaltose in water for injection, hydrochloric acid and sodium hydroxide may be used to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>73594-9310-1</NDCCode>
<PackageDescription>1 VIAL in 1 BOX (73594-9310-1) / 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>73594-9310-01</NDC11Code>
<ProductNDC>73594-9310</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Monoferric</ProprietaryName>
<NonProprietaryName>Ferric Derisomaltose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200116</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA208171</ApplicationNumber>
<LabelerName>Pharmacosmos Therapeutics Inc.</LabelerName>
<SubstanceName>FERRIC DERISOMALTOSE</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200116</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Monoferric is indicated for the treatment of iron deficiency anemia (IDA) in adult patients: 1 who have intolerance to oral iron or have had unsatisfactory response to oral iron, 2 who have non-hemodialysis dependent chronic kidney disease (NDD-CKD).</IndicationAndUsage>
<Description>Monoferric is an iron replacement product containing ferric derisomaltose for intravenous infusion. Ferric derisomaltose is an iron carbohydrate complex with a matrix structure composed of interchanging layers of ferric hydroxide and the carbohydrate derisomaltose. Derisomaltose consists of linear, hydrogenated isomaltooligosaccharides with an average molecular weight of 1000 Da and a narrow molecular weight distribution that is almost devoid of mono- and disaccharides. Ferric derisomaltose has an average molecular weight of 155,000 Da and has the following empirical formula. {FeO (1-3X) (OH) (1+3X) (C 6H 5O 73-) X}, (H 20) T, -. (C 6H 10O 6) R(-C 6H 10O 5-) Z(C 6H 13O 5) R, (NaCl) Y. X = 0.0311; T = 0.25; R = 0.14; Z = 0.49; Y = 0.14. Iron atoms placed in the electronegative cavities of the 3-D structure between and within the derisomaltose molecules. A schematic representation is presented below. Monoferric is a sterile, dark brown, non-transparent aqueous solution with pH 5.0-7.0, containing ferric derisomaltose dissolved in water for injections and filled into Type I glass vials. Each 1 mL of solution contains 100 mg of elemental iron as ferric derisomaltose in water for injection, hydrochloric acid and sodium hydroxide may be used to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>0031-9301-01</NDCCode>
<PackageDescription>18 TABLET, COATED in 1 BOTTLE (0031-9301-01) </PackageDescription>
<NDC11Code>00031-9301-01</NDC11Code>
<ProductNDC>0031-9301</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Robitussin Direct Sore Throat Pain</ProprietaryName>
<NonProprietaryName>Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220715</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M012</ApplicationNumber>
<LabelerName>Haleon US Holdings LLC</LabelerName>
<SubstanceName>ACETAMINOPHEN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220715</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves minor aches and pains due to:. sore throat. headache. backache. toothache. premenstrual and menstrual cramps. the common cold. minor pain of arthritis. muscular aches. temporarily reduces fever.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0420-9301-01</NDCCode>
<PackageDescription>1440 TRAY in 1 BOX (0420-9301-01) / 160 SYRINGE in 1 TRAY / .5 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00420-9301-01</NDC11Code>
<ProductNDC>0420-9301</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Semaglutide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<StartMarketingDate>20260507</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Novo Nordisk A/S</LabelerName>
<SubstanceName>SEMAGLUTIDE</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/.5mL</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2026-05-11</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>07-MAY-26</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>0487-9301-03</NDCCode>
<PackageDescription>100 VIAL, SINGLE-USE in 1 CARTON (0487-9301-03) > 3 mL in 1 VIAL, SINGLE-USE</PackageDescription>
<NDC11Code>00487-9301-03</NDC11Code>
<ProductNDC>0487-9301</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Isodium Chloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20020718</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Nephron Pharmaceuticals Corporation</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>.027</StrengthNumber>
<StrengthUnit>mg/3mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0487-9301-33</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (0487-9301-33) > 1 VIAL, SINGLE-USE in 1 POUCH > 3 mL in 1 VIAL, SINGLE-USE</PackageDescription>
<NDC11Code>00487-9301-33</NDC11Code>
<ProductNDC>0487-9301</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Isodium Chloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20020718</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Nephron Pharmaceuticals Corporation</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>.027</StrengthNumber>
<StrengthUnit>mg/3mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>29500-9301-5</NDCCode>
<PackageDescription>221.8 mL in 1 BOTTLE, PUMP (29500-9301-5)</PackageDescription>
<NDC11Code>29500-9301-05</NDC11Code>
<ProductNDC>29500-9301</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Personal Care Antibacterial Hand</ProprietaryName>
<ProprietaryNameSuffix>Coconut Ginger</ProprietaryNameSuffix>
<NonProprietaryName>Chloroxylenol</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20150801</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>Personal Care Products, LLC</LabelerName>
<SubstanceName>CHLOROXYLENOL</SubstanceName>
<StrengthNumber>.6657</StrengthNumber>
<StrengthUnit>mg/221.8mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>for hand washing to decrease bacteria on the skin.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>48951-9301-1</NDCCode>
<PackageDescription>8 AMPULE in 1 BOX (48951-9301-1) / 1 mL in 1 AMPULE</PackageDescription>
<NDC11Code>48951-9301-01</NDC11Code>
<ProductNDC>48951-9301</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Viscum Abietis 1</ProprietaryName>
<NonProprietaryName>Viscum Abietis 1</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140801</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Uriel Pharmacy Inc.</LabelerName>
<SubstanceName>VISCUM ALBUM FRUITING TOP</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>[hp_X]/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-01-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>FOR ORAL USE ONLY.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>59267-9301-1</NDCCode>
<PackageDescription>50000 mL in 1 DRUM (59267-9301-1)</PackageDescription>
<NDC11Code>59267-9301-01</NDC11Code>
<ProductNDC>59267-9301</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Pegvisomant</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<StartMarketingDate>20130311</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Pfizer Manufacturing Belgium NV</LabelerName>
<SubstanceName>PEGVISOMANT</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2019-01-12</LastUpdate>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>61589-9301-7</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (61589-9301-7) / 50 g in 1 TUBE</PackageDescription>
<NDC11Code>61589-9301-07</NDC11Code>
<ProductNDC>61589-9301</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>No7 Future Renew Defense Shield Spf 50</ProprietaryName>
<NonProprietaryName>Avobenzone, Octinoxate, Octisalate</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20250722</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>BCMC</LabelerName>
<SubstanceName>AVOBENZONE; OCTINOXATE; OCTISALATE</SubstanceName>
<StrengthNumber>3; 6.993; 4.5</StrengthNumber>
<StrengthUnit>g/50g; g/50g; g/50g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2026-09-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251104</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses - helps prevent sunburn.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>63629-9301-1</NDCCode>
<PackageDescription>100 TABLET, EXTENDED RELEASE in 1 BOTTLE (63629-9301-1) </PackageDescription>
<NDC11Code>63629-9301-01</NDC11Code>
<ProductNDC>63629-9301</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Felodipine</ProprietaryName>
<NonProprietaryName>Felodipine</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200812</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210847</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>FELODIPINE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220606</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Felodipine Extended-release Tablets, USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including felodipine. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (eg, on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Felodipine Extended-release Tablets, USP may be administered with other antihypertensive agents.</IndicationAndUsage>
<Description>Felodipine is a calcium antagonist (calcium channel blocker). Felodipine is a dihydropyridine derivative that is chemically described as ± ethyl methyl 4-(2,3-dichlorophenyl) -1,4-dihydro-2, 6-dimethyl-3, 5- pyridinedicarboxylate. Its empirical formula is C 18H 19Cl 2NO 4 and its structural formula is:. Felodipine is a slightly yellowish, crystalline powder with a molecular weight of 384.26. It is insoluble in water and is freely soluble in dichloromethane and ethanol. Felodipine is a racemic mixture. Felodipine Extended-release Tablets, USP provide extended release of felodipine. They are available as tablets containing 2.5 mg, 5 mg, or 10 mg of felodipine for oral administration. Inactive ingredients for core tablets are: anhydrous lactose, butylated hydroxyanisole, butylated hydroxytoluene, colloidal silicon dioxide, hypromellose, polyoxyl 40 hydrogenated castor oil, microcrystalline cellulose, povidone K30 and sodium stearyl fumarate. Film coating materials of 2.5mg: ferrosoferric oxide, hypromellose, iron oxide red, iron oxide yellow, maltodextrin, medium chain triglycerides, polydextrose, talc and titanium dioxide. Film coating materials of 5mg: ferrosoferric oxide, hypromellose, iron oxide red, iron oxide yellow, maltodextrin, medium chain triglycerides, polydextrose, talc and titanium dioxide. Film coating materials of 10mg: ferrosoferric oxide, hypromellose, iron oxide red, iron oxide yellow, maltodextrin, medium chain triglycerides, polydextrose, talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>68788-9301-0</NDCCode>
<PackageDescription>6 CAPSULE, DELAYED RELEASE PELLETS in 1 BOTTLE (68788-9301-0) </PackageDescription>
<NDC11Code>68788-9301-00</NDC11Code>
<ProductNDC>68788-9301</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine</ProprietaryName>
<ProprietaryNameSuffix>Delayed-release</ProprietaryNameSuffix>
<NonProprietaryName>Duloxetine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE PELLETS</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150323</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203088</ApplicationNumber>
<LabelerName>Preferred Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150323</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Duloxetine delayed-release capsules is indicated for the treatment of: 1 Major depressive disorder in adults, 2 Generalized anxiety disorder in adults and pediatric patients 7 years of age and older, 3 Diabetic peripheral neuropathic pain in adults, 4 Fibromyalgia in adults and pediatric patients 13 years of age and older, 5 Chronic musculoskeletal pain in adults.</IndicationAndUsage>
<Description>Duloxetine delayed-release capsules, USP are a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOS∙HCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 20, 30, 40 or 60 mg of duloxetine (equivalent to 22.4, 33.7, 44.9 or 67.3 mg of duloxetine hydrochloride, respectively). These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include ammonium hydroxide, black iron oxide, hypromellose, methacrylic acid copolymer dispersion (methacrylic acid-ethyl acrylate copolymer, polysorbate 80, sodium lauryl sulfate), potassium hydroxide, propylene glycol, shellac, sucrose, sugar spheres (maize starch, sucrose), talc, titanium dioxide, triethylcitrate, and hard gelatin capsules (gelatin, titanium dioxide). The 20 mg hard gelatin capsule colorant is yellow iron oxide. The 30 mg hard gelatin capsule colorants are FD&C Blue No. 1, FD&C Yellow No. 6, and FD&C Yellow No. 10. The 40 mg hard gelatin capsule colorants are FD&C Blue No. 2, red iron oxide, and yellow iron oxide. The 60 mg hard gelatin capsule colorants are FD&C Blue No. 1, FD&C Yellow No. 6, FD&C Yellow No.10, and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>68788-9301-1</NDCCode>
<PackageDescription>10 CAPSULE, DELAYED RELEASE PELLETS in 1 BOTTLE (68788-9301-1) </PackageDescription>
<NDC11Code>68788-9301-01</NDC11Code>
<ProductNDC>68788-9301</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine</ProprietaryName>
<ProprietaryNameSuffix>Delayed-release</ProprietaryNameSuffix>
<NonProprietaryName>Duloxetine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE PELLETS</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150323</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203088</ApplicationNumber>
<LabelerName>Preferred Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150323</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Duloxetine delayed-release capsules is indicated for the treatment of: 1 Major depressive disorder in adults, 2 Generalized anxiety disorder in adults and pediatric patients 7 years of age and older, 3 Diabetic peripheral neuropathic pain in adults, 4 Fibromyalgia in adults and pediatric patients 13 years of age and older, 5 Chronic musculoskeletal pain in adults.</IndicationAndUsage>
<Description>Duloxetine delayed-release capsules, USP are a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOS∙HCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 20, 30, 40 or 60 mg of duloxetine (equivalent to 22.4, 33.7, 44.9 or 67.3 mg of duloxetine hydrochloride, respectively). These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include ammonium hydroxide, black iron oxide, hypromellose, methacrylic acid copolymer dispersion (methacrylic acid-ethyl acrylate copolymer, polysorbate 80, sodium lauryl sulfate), potassium hydroxide, propylene glycol, shellac, sucrose, sugar spheres (maize starch, sucrose), talc, titanium dioxide, triethylcitrate, and hard gelatin capsules (gelatin, titanium dioxide). The 20 mg hard gelatin capsule colorant is yellow iron oxide. The 30 mg hard gelatin capsule colorants are FD&C Blue No. 1, FD&C Yellow No. 6, and FD&C Yellow No. 10. The 40 mg hard gelatin capsule colorants are FD&C Blue No. 2, red iron oxide, and yellow iron oxide. The 60 mg hard gelatin capsule colorants are FD&C Blue No. 1, FD&C Yellow No. 6, FD&C Yellow No.10, and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>68788-9301-3</NDCCode>
<PackageDescription>30 CAPSULE, DELAYED RELEASE PELLETS in 1 BOTTLE (68788-9301-3) </PackageDescription>
<NDC11Code>68788-9301-03</NDC11Code>
<ProductNDC>68788-9301</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine</ProprietaryName>
<ProprietaryNameSuffix>Delayed-release</ProprietaryNameSuffix>
<NonProprietaryName>Duloxetine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE PELLETS</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150323</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203088</ApplicationNumber>
<LabelerName>Preferred Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150323</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Duloxetine delayed-release capsules is indicated for the treatment of: 1 Major depressive disorder in adults, 2 Generalized anxiety disorder in adults and pediatric patients 7 years of age and older, 3 Diabetic peripheral neuropathic pain in adults, 4 Fibromyalgia in adults and pediatric patients 13 years of age and older, 5 Chronic musculoskeletal pain in adults.</IndicationAndUsage>
<Description>Duloxetine delayed-release capsules, USP are a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOS∙HCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 20, 30, 40 or 60 mg of duloxetine (equivalent to 22.4, 33.7, 44.9 or 67.3 mg of duloxetine hydrochloride, respectively). These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include ammonium hydroxide, black iron oxide, hypromellose, methacrylic acid copolymer dispersion (methacrylic acid-ethyl acrylate copolymer, polysorbate 80, sodium lauryl sulfate), potassium hydroxide, propylene glycol, shellac, sucrose, sugar spheres (maize starch, sucrose), talc, titanium dioxide, triethylcitrate, and hard gelatin capsules (gelatin, titanium dioxide). The 20 mg hard gelatin capsule colorant is yellow iron oxide. The 30 mg hard gelatin capsule colorants are FD&C Blue No. 1, FD&C Yellow No. 6, and FD&C Yellow No. 10. The 40 mg hard gelatin capsule colorants are FD&C Blue No. 2, red iron oxide, and yellow iron oxide. The 60 mg hard gelatin capsule colorants are FD&C Blue No. 1, FD&C Yellow No. 6, FD&C Yellow No.10, and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>68788-9301-6</NDCCode>
<PackageDescription>60 CAPSULE, DELAYED RELEASE PELLETS in 1 BOTTLE (68788-9301-6) </PackageDescription>
<NDC11Code>68788-9301-06</NDC11Code>
<ProductNDC>68788-9301</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine</ProprietaryName>
<ProprietaryNameSuffix>Delayed-release</ProprietaryNameSuffix>
<NonProprietaryName>Duloxetine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE PELLETS</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150323</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203088</ApplicationNumber>
<LabelerName>Preferred Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150323</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Duloxetine delayed-release capsules is indicated for the treatment of: 1 Major depressive disorder in adults, 2 Generalized anxiety disorder in adults and pediatric patients 7 years of age and older, 3 Diabetic peripheral neuropathic pain in adults, 4 Fibromyalgia in adults and pediatric patients 13 years of age and older, 5 Chronic musculoskeletal pain in adults.</IndicationAndUsage>
<Description>Duloxetine delayed-release capsules, USP are a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOS∙HCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 20, 30, 40 or 60 mg of duloxetine (equivalent to 22.4, 33.7, 44.9 or 67.3 mg of duloxetine hydrochloride, respectively). These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include ammonium hydroxide, black iron oxide, hypromellose, methacrylic acid copolymer dispersion (methacrylic acid-ethyl acrylate copolymer, polysorbate 80, sodium lauryl sulfate), potassium hydroxide, propylene glycol, shellac, sucrose, sugar spheres (maize starch, sucrose), talc, titanium dioxide, triethylcitrate, and hard gelatin capsules (gelatin, titanium dioxide). The 20 mg hard gelatin capsule colorant is yellow iron oxide. The 30 mg hard gelatin capsule colorants are FD&C Blue No. 1, FD&C Yellow No. 6, and FD&C Yellow No. 10. The 40 mg hard gelatin capsule colorants are FD&C Blue No. 2, red iron oxide, and yellow iron oxide. The 60 mg hard gelatin capsule colorants are FD&C Blue No. 1, FD&C Yellow No. 6, FD&C Yellow No.10, and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>68788-9301-9</NDCCode>
<PackageDescription>90 CAPSULE, DELAYED RELEASE PELLETS in 1 BOTTLE (68788-9301-9) </PackageDescription>
<NDC11Code>68788-9301-09</NDC11Code>
<ProductNDC>68788-9301</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine</ProprietaryName>
<ProprietaryNameSuffix>Delayed-release</ProprietaryNameSuffix>
<NonProprietaryName>Duloxetine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE PELLETS</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150323</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203088</ApplicationNumber>
<LabelerName>Preferred Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150323</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Duloxetine delayed-release capsules is indicated for the treatment of: 1 Major depressive disorder in adults, 2 Generalized anxiety disorder in adults and pediatric patients 7 years of age and older, 3 Diabetic peripheral neuropathic pain in adults, 4 Fibromyalgia in adults and pediatric patients 13 years of age and older, 5 Chronic musculoskeletal pain in adults.</IndicationAndUsage>
<Description>Duloxetine delayed-release capsules, USP are a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOS∙HCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride is a white to slightly brownish white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 20, 30, 40 or 60 mg of duloxetine (equivalent to 22.4, 33.7, 44.9 or 67.3 mg of duloxetine hydrochloride, respectively). These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include ammonium hydroxide, black iron oxide, hypromellose, methacrylic acid copolymer dispersion (methacrylic acid-ethyl acrylate copolymer, polysorbate 80, sodium lauryl sulfate), potassium hydroxide, propylene glycol, shellac, sucrose, sugar spheres (maize starch, sucrose), talc, titanium dioxide, triethylcitrate, and hard gelatin capsules (gelatin, titanium dioxide). The 20 mg hard gelatin capsule colorant is yellow iron oxide. The 30 mg hard gelatin capsule colorants are FD&C Blue No. 1, FD&C Yellow No. 6, and FD&C Yellow No. 10. The 40 mg hard gelatin capsule colorants are FD&C Blue No. 2, red iron oxide, and yellow iron oxide. The 60 mg hard gelatin capsule colorants are FD&C Blue No. 1, FD&C Yellow No. 6, FD&C Yellow No.10, and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>75857-9301-6</NDCCode>
<PackageDescription>473 mL in 1 BOTTLE (75857-9301-6)</PackageDescription>
<NDC11Code>75857-9301-06</NDC11Code>
<ProductNDC>75857-9301</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Spf 30 Sunscreen</ProprietaryName>
<NonProprietaryName>Octinoxate, Octisalate, Oxybenzone, Titanium Dioxide</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140108</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Ningbo Dowland Daily Health Co., Ltd</LabelerName>
<SubstanceName>OCTINOXATE; OCTISALATE; OXYBENZONE; TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>75; 20; 40; 25</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-02-07</LastUpdate>
</NDC>
<NDC>
<NDCCode>87849-9301-7</NDCCode>
<PackageDescription>1 CARTON in 1 BOX (87849-9301-7) / 1 TUBE in 1 CARTON / 50 g in 1 TUBE</PackageDescription>
<NDC11Code>87849-9301-07</NDC11Code>
<ProductNDC>87849-9301</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>No7 Future Renew Defense Shield Spf 50</ProprietaryName>
<NonProprietaryName>Avobenzone, Octinoxate, Octisalate</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20250701</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>Xact Packing Limited</LabelerName>
<SubstanceName>AVOBENZONE; OCTINOXATE; OCTISALATE</SubstanceName>
<StrengthNumber>3; 6.993; 4.5</StrengthNumber>
<StrengthUnit>g/50g; g/50g; g/50g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-08-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses - helps prevent sunburn.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0002-0152-01</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0002-0152-01) / .5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00002-0152-01</NDC11Code>
<ProductNDC>0002-0152</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zepbound</ProprietaryName>
<NonProprietaryName>Tirzepatide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20240328</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA217806</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>TIRZEPATIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/.5mL</StrengthUnit>
<Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240328</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .</IndicationAndUsage>
<Description>ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
</NDC>
<NDC>
<NDCCode>0002-0152-04</NDCCode>
<PackageDescription>4 VIAL, SINGLE-DOSE in 1 CARTON (0002-0152-04) / .5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00002-0152-04</NDC11Code>
<ProductNDC>0002-0152</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zepbound</ProprietaryName>
<NonProprietaryName>Tirzepatide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20240328</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA217806</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>TIRZEPATIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/.5mL</StrengthUnit>
<Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240808</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .</IndicationAndUsage>
<Description>ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
</NDC>
<NDC>
<NDCCode>0002-0152-61</NDCCode>
<PackageDescription>4 VIAL, SINGLE-DOSE in 1 CARTON (0002-0152-61) / .5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00002-0152-61</NDC11Code>
<ProductNDC>0002-0152</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zepbound</ProprietaryName>
<NonProprietaryName>Tirzepatide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20240328</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA217806</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>TIRZEPATIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/.5mL</StrengthUnit>
<Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250501</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .</IndicationAndUsage>
<Description>ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
</NDC>
<NDC>
<NDCCode>0002-0213-01</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0002-0213-01) / 3 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00002-0213-01</NDC11Code>
<ProductNDC>0002-0213</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Humulin</ProprietaryName>
<ProprietaryNameSuffix>R</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Human</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PARENTERAL</RouteName>
<StartMarketingDate>19830627</StartMarketingDate>
<EndMarketingDate>20261215</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA018780</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN HUMAN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin [CS], Insulin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20230620</StartMarketingDatePackage>
<EndMarketingDatePackage>20261215</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMULIN R is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin human is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli and has the empirical formula C257H383N65O77S6 with a molecular weight of 5.808 kDa. HUMULIN R (insulin human) injection is a short-acting human insulin for subcutaneous or intravenous use. HUMULIN R is a sterile, aqueous, clear, and colorless solution. HUMULIN R contains 100 units of insulin human in each milliliter. Each milliliter of HUMULIN R also contains glycerin (16 mg), metacresol (2.5 mg), endogenous zinc (approximately 0.015 mg/100 units,) and Water for Injection. Sodium hydroxide and hydrochloric acid may be added during manufacture to adjust the pH. The pH is 7.0 to 7.8.</Description>
</NDC>
</NDCList>