{
"NDC": [
{
"NDCCode": "73635-5808-3",
"PackageDescription": "85.5 mL in 1 JAR (73635-5808-3) ",
"NDC11Code": "73635-5808-03",
"ProductNDC": "73635-5808",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Germa Snake Oil Bee Venom",
"NonProprietaryName": "Methyl Salicylate 10%",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20190329",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M017",
"LabelerName": "Germa Products, LLC",
"SubstanceName": "METHYL SALICYLATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2025-10-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190329",
"SamplePackage": "N",
"IndicationAndUsage": "For the temporary relief of minor aches and pains of muscles and joints associated with simple backache, arthritis, strains and sprains."
},
{
"NDCCode": "10267-5808-3",
"PackageDescription": "38 TABLET, FILM COATED in 1 BOTTLE (10267-5808-3) ",
"NDC11Code": "10267-5808-03",
"ProductNDC": "10267-5808",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Acetaminophen, Caffeine",
"DosageFormName": "TABLET, FILM COATED",
"StartMarketingDate": "20241010",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Contract Pharmacal Corp.",
"SubstanceName": "ACETAMINOPHEN; CAFFEINE",
"StrengthNumber": "500; 75",
"StrengthUnit": "mg/1; mg/1",
"Status": "Unfinished",
"LastUpdate": "2025-03-11",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "10-OCT-24"
},
{
"NDCCode": "50090-5808-3",
"PackageDescription": "30 TABLET in 1 BOTTLE (50090-5808-3) ",
"NDC11Code": "50090-5808-03",
"ProductNDC": "50090-5808",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gemfibrozil",
"NonProprietaryName": "Gemfibrozil",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20210120",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214603",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "GEMFIBROZIL",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "PPAR alpha [CS], Peroxisome Proliferator Receptor alpha Agonist [EPC], Peroxisome Proliferator-activated Receptor alpha Agonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-12-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20211015",
"SamplePackage": "N",
"IndicationAndUsage": "Gemfibrozil Tablets are indicated as adjunctive therapy to diet for: 1 Treatment of adult patients with very high elevations of serum triglyceride levels (Types IV and V hyperlipidemia) who present a risk of pancreatitis and who do not respond adequately to a determined dietary effort to control them. Patients who present such risk typically have serum triglycerides over 2000 mg/dL and have elevations of VLDL-cholesterol as well as fasting chylomicrons (Type V hyperlipidemia). Subjects who consistently have total serum or plasma triglycerides below 1000 mg/dL are unlikely to present a risk of pancreatitis. Gemfibrozil therapy may be considered for those subjects with triglyceride elevations between 1000 and 2000 mg/dL who have a history of pancreatitis or of recurrent abdominal pain typical of pancreatitis. It is recognized that some Type IV patients with triglycerides under 1000 mg/dL may, through dietary or alcoholic indiscretion, convert to a Type V pattern with massive triglyceride elevations accompanying fasting chylomicronemia, but the influence of gemfibrozil therapy on the risk of pancreatitis in such situations has not been adequately studied. Drug therapy is not indicated for patients with Type I hyperlipoproteinemia, who have elevations of chylomicrons and plasma triglycerides, but who have normal levels of very low density lipoprotein (VLDL). Inspection of plasma refrigerated for 14 hours is helpful in distinguishing Types I, IV, and V hyperlipoproteinemia., 2 Reducing the risk of developing coronary heart disease only in Type IIb patients without history of or symptoms of existing coronary heart disease who have had an inadequate response to weight loss, dietary therapy, exercise, and other pharmacologic agents (such as bile acid sequestrants and nicotinic acid, known to reduce LDL- and raise HDL-cholesterol) and who have the following triad of lipid abnormalities: low HDL-cholesterol levels in addition to elevated LDL-cholesterol and elevated triglycerides (see WARNINGS, PRECAUTIONS, and CLINICAL PHARMACOLOGY). The National Cholesterol Education Program has defined a serum HDL-cholesterol value that is consistently below 35 mg/dL as constituting an independent risk factor for coronary heart disease. Patients with significantly elevated triglycerides should be closely observed when treated with gemfibrozil. In some patients with high triglyceride levels, treatment with gemfibrozil is associated with a significant increase in LDL-cholesterol. BECAUSE OF POTENTIAL TOXICITY SUCH AS MALIGNANCY, GALLBLADDER DISEASE, ABDOMINAL PAIN LEADING TO APPENDECTOMY AND OTHER ABDOMINAL SURGERIES, AN INCREASED INCIDENCE IN NON-CORONARY MORTALITY, AND THE 44% RELATIVE INCREASE DURING THE TRIAL PERIOD IN AGE-ADJUSTED ALL-CAUSE MORTALITY SEEN WITH THE CHEMICALLY AND PHARMACOLOGICALLY RELATED DRUG, CLOFIBRATE, THE POTENTIAL BENEFIT OF GEMFIBROZIL IN TREATING TYPE IIA PATIENTS WITH ELEVATIONS OF LDL-CHOLESTEROL ONLY IS NOT LIKELY TO OUTWEIGH THE RISKS. GEMFIBROZIL IS ALSO NOT INDICATED FOR THE TREATMENT OF PATIENTS WITH LOW HDL-CHOLESTEROL AS THEIR ONLY LIPID ABNORMALITY.",
"Description": "Gemfibrozil, USP is a lipid regulating agent. It is available as tablets for oral administration. Each tablet contains 600 mg gemfibrozil. Each tablet also contains the following inactive ingredients: pregelatinized starch, microcrystalline cellulose, povidone, colloidal silicon dioxide, polysorbate, croscarmellose sodium, calcium stearate, hydroxypropyl cellulose, and talc. The chemical name is 5-(2,5-dimethylphenoxy)-2,2-dimethylpentanoic acid, with the following structural formula. The empirical formula is C15H22O3 and the molecular weight is 250.35; the solubility in water and acid is 0.0019% and in dilute base it is greater than 1%. The melting point is 58° – 61°C. Gemfibrozil is a white solid which is stable under ordinary conditions."
},
{
"NDCCode": "73635-5803-3",
"PackageDescription": "85.5 mL in 1 JAR (73635-5803-3) ",
"NDC11Code": "73635-5803-03",
"ProductNDC": "73635-5803",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Germa Manteca Ubre Plus (yellow)",
"NonProprietaryName": "Methyl Salicylate 10%",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20190329",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M017",
"LabelerName": "Germa Products, LLC",
"SubstanceName": "METHYL SALICYLATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2025-10-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190329",
"SamplePackage": "N",
"IndicationAndUsage": "When using this product do not heat, microwave, add to hot water or any container where heating water may cause splattering and result in burns use on eyes or directly on mucous membranes take by mouth or place in nostrils apply to wounds or damaged skin use on bandage skin use, store, pour or spill near heat or open flame."
},
{
"NDCCode": "73635-5804-3",
"PackageDescription": "85.5 mL in 1 JAR (73635-5804-3) ",
"NDC11Code": "73635-5804-03",
"ProductNDC": "73635-5804",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Germa Manteca Ubre Plus (red)",
"NonProprietaryName": "Methyl Salicylate 10%",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20190329",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M017",
"LabelerName": "Germa Products, LLC",
"SubstanceName": "METHYL SALICYLATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2025-10-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190329",
"SamplePackage": "N",
"IndicationAndUsage": "When using this product do not heat, microwave, add to hot water or any container where heating water may cause splattering and result in burns use on eyes or directly on mucous membranes take by mouth or place in nostrils apply to wounds or damaged skin use on bandage skin use, store, pour or spill near heat or open flame."
},
{
"NDCCode": "73635-5805-3",
"PackageDescription": "85.5 mL in 1 CAN (73635-5805-3) ",
"NDC11Code": "73635-5805-03",
"ProductNDC": "73635-5805",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Germa Manteca Ubre Plus (tin)",
"NonProprietaryName": "Methyl Salicylate 10%",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20190329",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M014",
"LabelerName": "Germa Products, LLC",
"SubstanceName": "METHYL SALICYLATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2025-10-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190329",
"SamplePackage": "N",
"IndicationAndUsage": "Clean skin of lotions, creams, ointments, liniment or sprays ■ Apply liberally to affected area and massage until absorbed into skin ■ Do not apply more than 3 or 4 times daily. ■ Children under 12 years of age, ask a doctor."
},
{
"NDCCode": "73635-5806-3",
"PackageDescription": "88.5 mL in 1 APPLICATOR (73635-5806-3) ",
"NDC11Code": "73635-5806-03",
"ProductNDC": "73635-5806",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Germa Linimento Ubre Plus (roll-on)",
"NonProprietaryName": "Methyl Salicylate 10%",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20190329",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M017",
"LabelerName": "Germa Products, LLC",
"SubstanceName": "METHYL SALICYLATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2025-10-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190329",
"SamplePackage": "N",
"IndicationAndUsage": "When using this product do not ■ heat, microwave, add to hot water or any container where heating water may cause splattering and result in burns ■ use on eyes or directly on mucous membranes ■ take by mouth or place in nostrils ■ apply to wounds or damaged skin ■ use on bandage skin ■ use, store, pour or spill near heat or open flame."
},
{
"NDCCode": "0002-7726-05",
"PackageDescription": "5 CARTRIDGE in 1 CARTON (0002-7726-05) / 3 mL in 1 CARTRIDGE (0002-7726-01) ",
"NDC11Code": "00002-7726-05",
"ProductNDC": "0002-7726",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lyumjev",
"NonProprietaryName": "Insulin Lispro-aabc",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20200615",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761109",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200615",
"SamplePackage": "N",
"IndicationAndUsage": "LYUMJEV® is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro-aabc is a rapid-acting human insulin analog used to lower blood glucose. Insulin lispro-aabc is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro-aabc differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 daltons, both identical to that of human insulin. Insulin lispro-aabc has the following primary structure:. LYUMJEV (insulin lispro-aabc) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous administration. Each mL of LYUMJEV U-100 contains 100 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 39 mcg zinc ion), and Water for Injection, USP. Each mL of LYUMJEV U-200 contains 200 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 52 mcg zinc ion), and Water for Injection, USP. Hydrochloric acid and/or sodium hydroxide may be added to adjust the pH. LYUMJEV has a pH of 7.0 to 7.8."
},
{
"NDCCode": "0002-7728-01",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0002-7728-01) / 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00002-7728-01",
"ProductNDC": "0002-7728",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lyumjev",
"NonProprietaryName": "Insulin Lispro-aabc",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20200615",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761109",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200615",
"SamplePackage": "N",
"IndicationAndUsage": "LYUMJEV® is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro-aabc is a rapid-acting human insulin analog used to lower blood glucose. Insulin lispro-aabc is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro-aabc differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 daltons, both identical to that of human insulin. Insulin lispro-aabc has the following primary structure:. LYUMJEV (insulin lispro-aabc) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous administration. Each mL of LYUMJEV U-100 contains 100 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 39 mcg zinc ion), and Water for Injection, USP. Each mL of LYUMJEV U-200 contains 200 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 52 mcg zinc ion), and Water for Injection, USP. Hydrochloric acid and/or sodium hydroxide may be added to adjust the pH. LYUMJEV has a pH of 7.0 to 7.8."
},
{
"NDCCode": "0002-7728-99",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0002-7728-99) / 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00002-7728-99",
"ProductNDC": "0002-7728",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lyumjev",
"NonProprietaryName": "Insulin Lispro-aabc",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20200615",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761109",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200615",
"SamplePackage": "Y",
"IndicationAndUsage": "LYUMJEV® is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro-aabc is a rapid-acting human insulin analog used to lower blood glucose. Insulin lispro-aabc is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro-aabc differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 daltons, both identical to that of human insulin. Insulin lispro-aabc has the following primary structure:. LYUMJEV (insulin lispro-aabc) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous administration. Each mL of LYUMJEV U-100 contains 100 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 39 mcg zinc ion), and Water for Injection, USP. Each mL of LYUMJEV U-200 contains 200 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 52 mcg zinc ion), and Water for Injection, USP. Hydrochloric acid and/or sodium hydroxide may be added to adjust the pH. LYUMJEV has a pH of 7.0 to 7.8."
},
{
"NDCCode": "0002-8207-05",
"PackageDescription": "5 SYRINGE in 1 CARTON (0002-8207-05) / 3 mL in 1 SYRINGE (0002-8207-01) ",
"NDC11Code": "00002-8207-05",
"ProductNDC": "0002-8207",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lyumjev",
"ProprietaryNameSuffix": "Kwikpen",
"NonProprietaryName": "Insulin Lispro-aabc",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20200615",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761109",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200615",
"SamplePackage": "N",
"IndicationAndUsage": "LYUMJEV® is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro-aabc is a rapid-acting human insulin analog used to lower blood glucose. Insulin lispro-aabc is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro-aabc differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 daltons, both identical to that of human insulin. Insulin lispro-aabc has the following primary structure:. LYUMJEV (insulin lispro-aabc) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous administration. Each mL of LYUMJEV U-100 contains 100 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 39 mcg zinc ion), and Water for Injection, USP. Each mL of LYUMJEV U-200 contains 200 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 52 mcg zinc ion), and Water for Injection, USP. Hydrochloric acid and/or sodium hydroxide may be added to adjust the pH. LYUMJEV has a pH of 7.0 to 7.8."
},
{
"NDCCode": "0002-8207-61",
"PackageDescription": "1 SYRINGE in 1 CARTON (0002-8207-61) / 3 mL in 1 SYRINGE",
"NDC11Code": "00002-8207-61",
"ProductNDC": "0002-8207",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lyumjev",
"ProprietaryNameSuffix": "Kwikpen",
"NonProprietaryName": "Insulin Lispro-aabc",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20200615",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761109",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200615",
"SamplePackage": "Y",
"IndicationAndUsage": "LYUMJEV® is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro-aabc is a rapid-acting human insulin analog used to lower blood glucose. Insulin lispro-aabc is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro-aabc differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 daltons, both identical to that of human insulin. Insulin lispro-aabc has the following primary structure:. LYUMJEV (insulin lispro-aabc) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous administration. Each mL of LYUMJEV U-100 contains 100 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 39 mcg zinc ion), and Water for Injection, USP. Each mL of LYUMJEV U-200 contains 200 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 52 mcg zinc ion), and Water for Injection, USP. Hydrochloric acid and/or sodium hydroxide may be added to adjust the pH. LYUMJEV has a pH of 7.0 to 7.8."
},
{
"NDCCode": "0002-8228-27",
"PackageDescription": "2 SYRINGE in 1 CARTON (0002-8228-27) / 3 mL in 1 SYRINGE (0002-8228-01) ",
"NDC11Code": "00002-8228-27",
"ProductNDC": "0002-8228",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lyumjev",
"ProprietaryNameSuffix": "Kwikpen",
"NonProprietaryName": "Insulin Lispro-aabc",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20200615",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761109",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "200",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200615",
"SamplePackage": "N",
"IndicationAndUsage": "LYUMJEV® is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro-aabc is a rapid-acting human insulin analog used to lower blood glucose. Insulin lispro-aabc is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro-aabc differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 daltons, both identical to that of human insulin. Insulin lispro-aabc has the following primary structure:. LYUMJEV (insulin lispro-aabc) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous administration. Each mL of LYUMJEV U-100 contains 100 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 39 mcg zinc ion), and Water for Injection, USP. Each mL of LYUMJEV U-200 contains 200 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 52 mcg zinc ion), and Water for Injection, USP. Hydrochloric acid and/or sodium hydroxide may be added to adjust the pH. LYUMJEV has a pH of 7.0 to 7.8."
},
{
"NDCCode": "0002-8235-05",
"PackageDescription": "5 SYRINGE in 1 CARTON (0002-8235-05) / 3 mL in 1 SYRINGE (0002-8235-01) ",
"NDC11Code": "00002-8235-05",
"ProductNDC": "0002-8235",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lyumjev",
"ProprietaryNameSuffix": "Tempo Pen",
"NonProprietaryName": "Insulin Lispro-aabc",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20200615",
"EndMarketingDate": "20271106",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761109",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20220929",
"EndMarketingDatePackage": "20271106",
"SamplePackage": "N",
"IndicationAndUsage": "LYUMJEV® is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro-aabc is a rapid-acting human insulin analog used to lower blood glucose. Insulin lispro-aabc is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro-aabc differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 daltons, both identical to that of human insulin. Insulin lispro-aabc has the following primary structure:. LYUMJEV (insulin lispro-aabc) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous administration. Each mL of LYUMJEV U-100 contains 100 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 39 mcg zinc ion), and Water for Injection, USP. Each mL of LYUMJEV U-200 contains 200 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 52 mcg zinc ion), and Water for Injection, USP. Hydrochloric acid and/or sodium hydroxide may be added to adjust the pH. LYUMJEV has a pH of 7.0 to 7.8."
},
{
"NDCCode": "0002-8235-99",
"PackageDescription": "1 SYRINGE in 1 CARTON (0002-8235-99) / 3 mL in 1 SYRINGE",
"NDC11Code": "00002-8235-99",
"ProductNDC": "0002-8235",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lyumjev",
"ProprietaryNameSuffix": "Tempo Pen",
"NonProprietaryName": "Insulin Lispro-aabc",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20200615",
"EndMarketingDate": "20271106",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761109",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20240110",
"EndMarketingDatePackage": "20271106",
"SamplePackage": "Y",
"IndicationAndUsage": "LYUMJEV® is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro-aabc is a rapid-acting human insulin analog used to lower blood glucose. Insulin lispro-aabc is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro-aabc differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 daltons, both identical to that of human insulin. Insulin lispro-aabc has the following primary structure:. LYUMJEV (insulin lispro-aabc) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous administration. Each mL of LYUMJEV U-100 contains 100 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 39 mcg zinc ion), and Water for Injection, USP. Each mL of LYUMJEV U-200 contains 200 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 52 mcg zinc ion), and Water for Injection, USP. Hydrochloric acid and/or sodium hydroxide may be added to adjust the pH. LYUMJEV has a pH of 7.0 to 7.8."
},
{
"NDCCode": "0002-8351-05",
"PackageDescription": "5 SYRINGE in 1 CARTON (0002-8351-05) / 3 mL in 1 SYRINGE (0002-8351-01) ",
"NDC11Code": "00002-8351-05",
"ProductNDC": "0002-8351",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lyumjev",
"ProprietaryNameSuffix": "Junior Kwikpen",
"NonProprietaryName": "Insulin Lispro-aabc",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20200615",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761109",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200615",
"SamplePackage": "N",
"IndicationAndUsage": "LYUMJEV® is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro-aabc is a rapid-acting human insulin analog used to lower blood glucose. Insulin lispro-aabc is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro-aabc differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 daltons, both identical to that of human insulin. Insulin lispro-aabc has the following primary structure:. LYUMJEV (insulin lispro-aabc) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous administration. Each mL of LYUMJEV U-100 contains 100 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 39 mcg zinc ion), and Water for Injection, USP. Each mL of LYUMJEV U-200 contains 200 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 52 mcg zinc ion), and Water for Injection, USP. Hydrochloric acid and/or sodium hydroxide may be added to adjust the pH. LYUMJEV has a pH of 7.0 to 7.8."
},
{
"NDCCode": "0024-5924-10",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0024-5924-10) / 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00024-5924-10",
"ProductNDC": "0024-5924",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Admelog",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20171211",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA209196",
"LabelerName": "Sanofi-Aventis U.S. LLC",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "U/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2025-06-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20171211",
"SamplePackage": "N",
"IndicationAndUsage": "ADMELOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Insulin lispro has a molecular weight of 5808 Da, identical to that of human insulin. ADMELOG (insulin lispro) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous use. Each mL of ADMELOG contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.88 mg), glycerin (16 mg), metacresol (3.15 mg), zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Insulin lispro has a pH of 7.0 to 7.8. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide. ADMELOG is latex free."
},
{
"NDCCode": "0024-5925-00",
"PackageDescription": "1 SYRINGE in 1 CARTON (0024-5925-00) / 3 mL in 1 SYRINGE",
"NDC11Code": "00024-5925-00",
"ProductNDC": "0024-5925",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Admelog",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20171211",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA209196",
"LabelerName": "Sanofi-Aventis U.S. LLC",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "U/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2025-06-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20171211",
"SamplePackage": "Y",
"IndicationAndUsage": "ADMELOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Insulin lispro has a molecular weight of 5808 Da, identical to that of human insulin. ADMELOG (insulin lispro) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous use. Each mL of ADMELOG contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.88 mg), glycerin (16 mg), metacresol (3.15 mg), zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Insulin lispro has a pH of 7.0 to 7.8. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide. ADMELOG is latex free."
},
{
"NDCCode": "0024-5925-05",
"PackageDescription": "5 SYRINGE in 1 CARTON (0024-5925-05) / 3 mL in 1 SYRINGE (0024-5925-01) ",
"NDC11Code": "00024-5925-05",
"ProductNDC": "0024-5925",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Admelog",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20171211",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA209196",
"LabelerName": "Sanofi-Aventis U.S. LLC",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "U/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2025-06-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20171211",
"SamplePackage": "N",
"IndicationAndUsage": "ADMELOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Insulin lispro has a molecular weight of 5808 Da, identical to that of human insulin. ADMELOG (insulin lispro) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous use. Each mL of ADMELOG contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.88 mg), glycerin (16 mg), metacresol (3.15 mg), zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Insulin lispro has a pH of 7.0 to 7.8. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide. ADMELOG is latex free."
},
{
"NDCCode": "0024-5926-05",
"PackageDescription": "1 VIAL in 1 CARTON (0024-5926-05) / 3 mL in 1 VIAL",
"NDC11Code": "00024-5926-05",
"ProductNDC": "0024-5926",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Admelog",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20181019",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA209196",
"LabelerName": "Sanofi-Aventis U.S. LLC",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "U/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2025-06-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181019",
"SamplePackage": "N",
"IndicationAndUsage": "ADMELOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Insulin lispro has a molecular weight of 5808 Da, identical to that of human insulin. ADMELOG (insulin lispro) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous use. Each mL of ADMELOG contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.88 mg), glycerin (16 mg), metacresol (3.15 mg), zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Insulin lispro has a pH of 7.0 to 7.8. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide. ADMELOG is latex free."
},
{
"NDCCode": "0169-1833-02",
"PackageDescription": "1 VIAL in 1 CARTON (0169-1833-02) > 10 mL in 1 VIAL",
"NDC11Code": "00169-1833-02",
"ProductNDC": "0169-1833",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Novolin",
"ProprietaryNameSuffix": "R",
"NonProprietaryName": "Human Insulin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19910625",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA019938",
"LabelerName": "Novo Nordisk",
"SubstanceName": "INSULIN HUMAN",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin [CS], Insulin [EPC]",
"Status": "Active",
"LastUpdate": "2022-12-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19910625",
"SamplePackage": "N",
"IndicationAndUsage": "NOVOLIN R is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.",
"Description": "Insulin human is a short-acting human insulin produced by recombinant DNA technology, utilizing Saccharomyces cerevisiae (baker’s yeast) as the production organism and has the empirical formula C257H383N65O77S6 with a molecular weight of 5808 Da. Figure 1: Structural formula of NOVOLIN R. NOVOLIN R (insulin human) injection is a sterile, clear and colorless solution for subcutaneous or intravenous use. Each mililiter of NOVOLIN R contains 100 units of insulin human, and glycerin (16 mg), metacresol (3 mg), zinc (approximately 21 mcg/mL) and Water for Injection. Hydrochloric acid 2N and sodium hydroxide 2N may be added during manufacture to adjust pH. The pH is 7.0 to 7.8."
},
{
"NDCCode": "0169-1833-11",
"PackageDescription": "1 VIAL in 1 CARTON (0169-1833-11) > 10 mL in 1 VIAL",
"NDC11Code": "00169-1833-11",
"ProductNDC": "0169-1833",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Novolin",
"ProprietaryNameSuffix": "R",
"NonProprietaryName": "Human Insulin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19910625",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA019938",
"LabelerName": "Novo Nordisk",
"SubstanceName": "INSULIN HUMAN",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin [CS], Insulin [EPC]",
"Status": "Active",
"LastUpdate": "2022-12-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19910625",
"SamplePackage": "N",
"IndicationAndUsage": "NOVOLIN R is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.",
"Description": "Insulin human is a short-acting human insulin produced by recombinant DNA technology, utilizing Saccharomyces cerevisiae (baker’s yeast) as the production organism and has the empirical formula C257H383N65O77S6 with a molecular weight of 5808 Da. Figure 1: Structural formula of NOVOLIN R. NOVOLIN R (insulin human) injection is a sterile, clear and colorless solution for subcutaneous or intravenous use. Each mililiter of NOVOLIN R contains 100 units of insulin human, and glycerin (16 mg), metacresol (3 mg), zinc (approximately 21 mcg/mL) and Water for Injection. Hydrochloric acid 2N and sodium hydroxide 2N may be added during manufacture to adjust pH. The pH is 7.0 to 7.8."
},
{
"NDCCode": "0169-3003-15",
"PackageDescription": "5 SYRINGE, PLASTIC in 1 CARTON (0169-3003-15) > 3 mL in 1 SYRINGE, PLASTIC (0169-3003-01) ",
"NDC11Code": "00169-3003-15",
"ProductNDC": "0169-3003",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Novolin",
"ProprietaryNameSuffix": "R",
"NonProprietaryName": "Human Insulin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20190906",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA019938",
"LabelerName": "Novo Nordisk",
"SubstanceName": "INSULIN HUMAN",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin [CS], Insulin [EPC]",
"Status": "Active",
"LastUpdate": "2022-12-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190906",
"SamplePackage": "N",
"IndicationAndUsage": "NOVOLIN R is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.",
"Description": "Insulin human is a short-acting human insulin produced by recombinant DNA technology, utilizing Saccharomyces cerevisiae (baker’s yeast) as the production organism and has the empirical formula C257H383N65O77S6 with a molecular weight of 5808 Da. Figure 1: Structural formula of NOVOLIN R. NOVOLIN R (insulin human) injection is a sterile, clear and colorless solution for subcutaneous or intravenous use. Each mililiter of NOVOLIN R contains 100 units of insulin human, and glycerin (16 mg), metacresol (3 mg), zinc (approximately 21 mcg/mL) and Water for Injection. Hydrochloric acid 2N and sodium hydroxide 2N may be added during manufacture to adjust pH. The pH is 7.0 to 7.8."
},
{
"NDCCode": "0169-3003-25",
"PackageDescription": "5 SYRINGE, PLASTIC in 1 CARTON (0169-3003-25) > 3 mL in 1 SYRINGE, PLASTIC (0169-3003-12) ",
"NDC11Code": "00169-3003-25",
"ProductNDC": "0169-3003",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Novolin",
"ProprietaryNameSuffix": "R",
"NonProprietaryName": "Human Insulin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20190906",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA019938",
"LabelerName": "Novo Nordisk",
"SubstanceName": "INSULIN HUMAN",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin [CS], Insulin [EPC]",
"Status": "Active",
"LastUpdate": "2022-12-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190906",
"SamplePackage": "N",
"IndicationAndUsage": "NOVOLIN R is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.",
"Description": "Insulin human is a short-acting human insulin produced by recombinant DNA technology, utilizing Saccharomyces cerevisiae (baker’s yeast) as the production organism and has the empirical formula C257H383N65O77S6 with a molecular weight of 5808 Da. Figure 1: Structural formula of NOVOLIN R. NOVOLIN R (insulin human) injection is a sterile, clear and colorless solution for subcutaneous or intravenous use. Each mililiter of NOVOLIN R contains 100 units of insulin human, and glycerin (16 mg), metacresol (3 mg), zinc (approximately 21 mcg/mL) and Water for Injection. Hydrochloric acid 2N and sodium hydroxide 2N may be added during manufacture to adjust pH. The pH is 7.0 to 7.8."
},
{
"NDCCode": "0169-3004-15",
"PackageDescription": "5 SYRINGE, PLASTIC in 1 CARTON (0169-3004-15) > 3 mL in 1 SYRINGE, PLASTIC (0169-3004-01) ",
"NDC11Code": "00169-3004-15",
"ProductNDC": "0169-3004",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Novolin",
"ProprietaryNameSuffix": "N",
"NonProprietaryName": "Human Insulin",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20190906",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA019959",
"LabelerName": "Novo Nordisk",
"SubstanceName": "INSULIN HUMAN",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin [CS], Insulin [EPC]",
"Status": "Active",
"LastUpdate": "2022-12-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190906",
"SamplePackage": "N",
"IndicationAndUsage": "NOVOLIN N is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.",
"Description": "Insulin isophane human is produced by recombinant DNA technology, utilizing Saccharomyces cerevisiae (baker’s yeast) as the production organism. Insulin isophane human is a suspension of crystals produced from combining human insulin and protamine sulfate under appropriate conditions for crystal formation. The amino acid sequence of insulin isophane human is identical to human insulin and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 Da. Figure 1: Structural formula of human insulin. NOVOLIN N (insulin isophane human) injectable suspension is an intermediate acting human insulin. It is a sterile, white and cloudy suspension that contains insulin isophane human suspension (NPH) for subcutaneous use. Each milliliter of Novolin N contains 100 units of insulin human, dibasic sodium phosphate (1.9 mg), glycerin (16 mg), metacresol (1.5 mg), phenol (0.65 mg), protamine sulfate (approximately 0.35 mg), zinc (33.5 mcg for the vial or 33.2 mcg for the FlexPen), and Water for Injection. Hydrochloric acid 2N and sodium hydroxide 2N may be added to adjust the pH. The pH is 7.1 to 7.5."
},
{
"NDCCode": "0169-3004-25",
"PackageDescription": "5 SYRINGE, PLASTIC in 1 CARTON (0169-3004-25) > 3 mL in 1 SYRINGE, PLASTIC (0169-3004-12) ",
"NDC11Code": "00169-3004-25",
"ProductNDC": "0169-3004",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Novolin",
"ProprietaryNameSuffix": "N",
"NonProprietaryName": "Human Insulin",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20190906",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA019959",
"LabelerName": "Novo Nordisk",
"SubstanceName": "INSULIN HUMAN",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin [CS], Insulin [EPC]",
"Status": "Active",
"LastUpdate": "2022-12-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190906",
"SamplePackage": "N",
"IndicationAndUsage": "NOVOLIN N is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.",
"Description": "Insulin isophane human is produced by recombinant DNA technology, utilizing Saccharomyces cerevisiae (baker’s yeast) as the production organism. Insulin isophane human is a suspension of crystals produced from combining human insulin and protamine sulfate under appropriate conditions for crystal formation. The amino acid sequence of insulin isophane human is identical to human insulin and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 Da. Figure 1: Structural formula of human insulin. NOVOLIN N (insulin isophane human) injectable suspension is an intermediate acting human insulin. It is a sterile, white and cloudy suspension that contains insulin isophane human suspension (NPH) for subcutaneous use. Each milliliter of Novolin N contains 100 units of insulin human, dibasic sodium phosphate (1.9 mg), glycerin (16 mg), metacresol (1.5 mg), phenol (0.65 mg), protamine sulfate (approximately 0.35 mg), zinc (33.5 mcg for the vial or 33.2 mcg for the FlexPen), and Water for Injection. Hydrochloric acid 2N and sodium hydroxide 2N may be added to adjust the pH. The pH is 7.1 to 7.5."
},
{
"NDCCode": "0169-3007-15",
"PackageDescription": "5 SYRINGE, PLASTIC in 1 CARTON (0169-3007-15) > 3 mL in 1 SYRINGE, PLASTIC (0169-3007-01) ",
"NDC11Code": "00169-3007-15",
"ProductNDC": "0169-3007",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Novolin",
"ProprietaryNameSuffix": "70/30",
"NonProprietaryName": "Human Insulin",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20180601",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA019991",
"LabelerName": "Novo Nordisk",
"SubstanceName": "INSULIN HUMAN",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin [CS], Insulin [EPC]",
"Status": "Active",
"LastUpdate": "2022-12-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180601",
"SamplePackage": "N",
"IndicationAndUsage": "NOVOLIN 70/30 is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus. Limitations of Use. In NOVOLIN 70/30, the proportions of short-acting and intermediate-acting insulins are fixed and do not allow for basal versus prandial dose adjustments.",
"Description": "Insulin human is produced by recombinant DNA technology, utilizing Saccharomyces cerevisiae (baker’s yeast) as the production organism. The amino acid sequence of insulin human is identical to human insulin and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 Da. NOVOLIN 70/30 (insulin isophane human and insulin human) injectable suspension is a mixture of 70% of insulin isophane human, an intermediate-acting insulin, and 30% of insulin human, a short-acting insulin. NOVOLIN 70/30 is a suspension of crystals produced from combining insulin human and protamine sulfate under appropriate conditions for crystal formation and mixing with insulin human injection. Figure 1: Structural formula of human insulin. NOVOLIN 70/30 is a sterile, white and cloudy injectable suspension that contains insulin isophane human suspension (NPH) and insulin human injection (regular) for subcutaneous use. Each milliliter of NOVOLIN 70/30 contains 100 units of insulin human, dibasic sodium phosphate (1.9 mg), glycerin (16 mg), metacresol (1.5 mg), phenol (0.65 mg), protamine sulfate (approximately 0.25 mg), zinc (20.5 mcg/mL for the vial or 30.1 mcg for the FlexPen), and Water for Injection. Hydrochloric acid 2N and sodium hydroxide 2N may be added during manufacture to adjust the pH. The pH is 7.1-7.5."
},
{
"NDCCode": "0169-3007-25",
"PackageDescription": "5 SYRINGE, PLASTIC in 1 CARTON (0169-3007-25) > 3 mL in 1 SYRINGE, PLASTIC (0169-3007-12) ",
"NDC11Code": "00169-3007-25",
"ProductNDC": "0169-3007",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Novolin",
"ProprietaryNameSuffix": "70/30",
"NonProprietaryName": "Human Insulin",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20180601",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA019991",
"LabelerName": "Novo Nordisk",
"SubstanceName": "INSULIN HUMAN",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin [CS], Insulin [EPC]",
"Status": "Active",
"LastUpdate": "2022-12-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180601",
"SamplePackage": "N",
"IndicationAndUsage": "NOVOLIN 70/30 is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus. Limitations of Use. In NOVOLIN 70/30, the proportions of short-acting and intermediate-acting insulins are fixed and do not allow for basal versus prandial dose adjustments.",
"Description": "Insulin human is produced by recombinant DNA technology, utilizing Saccharomyces cerevisiae (baker’s yeast) as the production organism. The amino acid sequence of insulin human is identical to human insulin and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 Da. NOVOLIN 70/30 (insulin isophane human and insulin human) injectable suspension is a mixture of 70% of insulin isophane human, an intermediate-acting insulin, and 30% of insulin human, a short-acting insulin. NOVOLIN 70/30 is a suspension of crystals produced from combining insulin human and protamine sulfate under appropriate conditions for crystal formation and mixing with insulin human injection. Figure 1: Structural formula of human insulin. NOVOLIN 70/30 is a sterile, white and cloudy injectable suspension that contains insulin isophane human suspension (NPH) and insulin human injection (regular) for subcutaneous use. Each milliliter of NOVOLIN 70/30 contains 100 units of insulin human, dibasic sodium phosphate (1.9 mg), glycerin (16 mg), metacresol (1.5 mg), phenol (0.65 mg), protamine sulfate (approximately 0.25 mg), zinc (20.5 mcg/mL for the vial or 30.1 mcg for the FlexPen), and Water for Injection. Hydrochloric acid 2N and sodium hydroxide 2N may be added during manufacture to adjust the pH. The pH is 7.1-7.5."
},
{
"NDCCode": "50090-0352-0",
"PackageDescription": "1 VIAL in 1 CARTON (50090-0352-0) > 10 mL in 1 VIAL (50090-0352-9)",
"NDC11Code": "50090-0352-00",
"ProductNDC": "50090-0352",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Humulin",
"ProprietaryNameSuffix": "N ",
"NonProprietaryName": "Insulin Human",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19830627",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018781",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "INSULIN HUMAN",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "HUMULIN N is an intermediate-acting recombinant human insulin indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.",
"Description": "HUMULIN N (human insulin [rDNA origin] isophane suspension) is a human insulin suspension. Human insulin is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. HUMULIN N is a suspension of crystals produced from combining human insulin and protamine sulfate under appropriate conditions for crystal formation. The amino acid sequence of HUMULIN N is identical to human insulin and has the empirical formula C257H383N65O77S6 with a molecular weight of 5808. HUMULIN N is a sterile white suspension. Each milliliter of HUMULIN N contains 100 units of insulin human, 0.35 mg of protamine sulfate, 16 mg of glycerin, 3.78 mg of dibasic sodium phosphate, 1.6 mg of metacresol, 0.65 mg of phenol, zinc oxide content adjusted to provide 0.025 mg zinc ion, and Water for Injection. The pH is 7.0 to 7.5. Sodium hydroxide and/or hydrochloric acid may be added during manufacture to adjust the pH."
},
{
"NDCCode": "50090-0444-0",
"PackageDescription": "1 VIAL in 1 CARTON (50090-0444-0) > 10 mL in 1 VIAL",
"NDC11Code": "50090-0444-00",
"ProductNDC": "50090-0444",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Humulin",
"ProprietaryNameSuffix": "70/30 ",
"NonProprietaryName": "Insulin Human",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19890626",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019717",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "INSULIN HUMAN",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "HUMULIN 70/30 is a fixed ratio premix recombinant human insulin formulation indicated to improve glycemic control in adult patients with diabetes mellitus.",
"Description": "HUMULIN 70/30 (70% human insulin isophane suspension and 30% human insulin injection [rDNA origin]) is a human insulin suspension. Human insulin is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. HUMULIN 70/30 is a suspension of crystals produced from combining human insulin and protamine sulfate under appropriate conditions for crystal formation and mixing with human insulin injection. The amino acid sequence of HUMULIN 70/30 is identical to human insulin and has the empirical formula C257H383N65O77S6 with a molecular weight of 5808. HUMULIN 70/30 is a sterile white suspension. Each milliliter of HUMULIN 70/30 contains 100 units of insulin human, 0.24 mg of protamine sulfate, 16 mg of glycerin, 3.78 mg of dibasic sodium phosphate, 1.6 mg of metacresol, 0.65 mg of phenol, zinc oxide content adjusted to provide 0.025 mg zinc ion, and Water for Injection. The pH is 7.0 to 7.8. Sodium hydroxide and/or hydrochloric acid may be added during manufacture to adjust the pH."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>73635-5808-3</NDCCode>
<PackageDescription>85.5 mL in 1 JAR (73635-5808-3) </PackageDescription>
<NDC11Code>73635-5808-03</NDC11Code>
<ProductNDC>73635-5808</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Germa Snake Oil Bee Venom</ProprietaryName>
<NonProprietaryName>Methyl Salicylate 10%</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20190329</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M017</ApplicationNumber>
<LabelerName>Germa Products, LLC</LabelerName>
<SubstanceName>METHYL SALICYLATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-10-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190329</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the temporary relief of minor aches and pains of muscles and joints associated with simple backache, arthritis, strains and sprains.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>10267-5808-3</NDCCode>
<PackageDescription>38 TABLET, FILM COATED in 1 BOTTLE (10267-5808-3) </PackageDescription>
<NDC11Code>10267-5808-03</NDC11Code>
<ProductNDC>10267-5808</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Acetaminophen, Caffeine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<StartMarketingDate>20241010</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Contract Pharmacal Corp.</LabelerName>
<SubstanceName>ACETAMINOPHEN; CAFFEINE</SubstanceName>
<StrengthNumber>500; 75</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-03-11</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>10-OCT-24</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>50090-5808-3</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (50090-5808-3) </PackageDescription>
<NDC11Code>50090-5808-03</NDC11Code>
<ProductNDC>50090-5808</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gemfibrozil</ProprietaryName>
<NonProprietaryName>Gemfibrozil</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210120</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214603</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>GEMFIBROZIL</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>PPAR alpha [CS], Peroxisome Proliferator Receptor alpha Agonist [EPC], Peroxisome Proliferator-activated Receptor alpha Agonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211015</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gemfibrozil Tablets are indicated as adjunctive therapy to diet for: 1 Treatment of adult patients with very high elevations of serum triglyceride levels (Types IV and V hyperlipidemia) who present a risk of pancreatitis and who do not respond adequately to a determined dietary effort to control them. Patients who present such risk typically have serum triglycerides over 2000 mg/dL and have elevations of VLDL-cholesterol as well as fasting chylomicrons (Type V hyperlipidemia). Subjects who consistently have total serum or plasma triglycerides below 1000 mg/dL are unlikely to present a risk of pancreatitis. Gemfibrozil therapy may be considered for those subjects with triglyceride elevations between 1000 and 2000 mg/dL who have a history of pancreatitis or of recurrent abdominal pain typical of pancreatitis. It is recognized that some Type IV patients with triglycerides under 1000 mg/dL may, through dietary or alcoholic indiscretion, convert to a Type V pattern with massive triglyceride elevations accompanying fasting chylomicronemia, but the influence of gemfibrozil therapy on the risk of pancreatitis in such situations has not been adequately studied. Drug therapy is not indicated for patients with Type I hyperlipoproteinemia, who have elevations of chylomicrons and plasma triglycerides, but who have normal levels of very low density lipoprotein (VLDL). Inspection of plasma refrigerated for 14 hours is helpful in distinguishing Types I, IV, and V hyperlipoproteinemia., 2 Reducing the risk of developing coronary heart disease only in Type IIb patients without history of or symptoms of existing coronary heart disease who have had an inadequate response to weight loss, dietary therapy, exercise, and other pharmacologic agents (such as bile acid sequestrants and nicotinic acid, known to reduce LDL- and raise HDL-cholesterol) and who have the following triad of lipid abnormalities: low HDL-cholesterol levels in addition to elevated LDL-cholesterol and elevated triglycerides (see WARNINGS, PRECAUTIONS, and CLINICAL PHARMACOLOGY). The National Cholesterol Education Program has defined a serum HDL-cholesterol value that is consistently below 35 mg/dL as constituting an independent risk factor for coronary heart disease. Patients with significantly elevated triglycerides should be closely observed when treated with gemfibrozil. In some patients with high triglyceride levels, treatment with gemfibrozil is associated with a significant increase in LDL-cholesterol. BECAUSE OF POTENTIAL TOXICITY SUCH AS MALIGNANCY, GALLBLADDER DISEASE, ABDOMINAL PAIN LEADING TO APPENDECTOMY AND OTHER ABDOMINAL SURGERIES, AN INCREASED INCIDENCE IN NON-CORONARY MORTALITY, AND THE 44% RELATIVE INCREASE DURING THE TRIAL PERIOD IN AGE-ADJUSTED ALL-CAUSE MORTALITY SEEN WITH THE CHEMICALLY AND PHARMACOLOGICALLY RELATED DRUG, CLOFIBRATE, THE POTENTIAL BENEFIT OF GEMFIBROZIL IN TREATING TYPE IIA PATIENTS WITH ELEVATIONS OF LDL-CHOLESTEROL ONLY IS NOT LIKELY TO OUTWEIGH THE RISKS. GEMFIBROZIL IS ALSO NOT INDICATED FOR THE TREATMENT OF PATIENTS WITH LOW HDL-CHOLESTEROL AS THEIR ONLY LIPID ABNORMALITY.</IndicationAndUsage>
<Description>Gemfibrozil, USP is a lipid regulating agent. It is available as tablets for oral administration. Each tablet contains 600 mg gemfibrozil. Each tablet also contains the following inactive ingredients: pregelatinized starch, microcrystalline cellulose, povidone, colloidal silicon dioxide, polysorbate, croscarmellose sodium, calcium stearate, hydroxypropyl cellulose, and talc. The chemical name is 5-(2,5-dimethylphenoxy)-2,2-dimethylpentanoic acid, with the following structural formula. The empirical formula is C15H22O3 and the molecular weight is 250.35; the solubility in water and acid is 0.0019% and in dilute base it is greater than 1%. The melting point is 58° – 61°C. Gemfibrozil is a white solid which is stable under ordinary conditions.</Description>
</NDC>
<NDC>
<NDCCode>73635-5803-3</NDCCode>
<PackageDescription>85.5 mL in 1 JAR (73635-5803-3) </PackageDescription>
<NDC11Code>73635-5803-03</NDC11Code>
<ProductNDC>73635-5803</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Germa Manteca Ubre Plus (yellow)</ProprietaryName>
<NonProprietaryName>Methyl Salicylate 10%</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20190329</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M017</ApplicationNumber>
<LabelerName>Germa Products, LLC</LabelerName>
<SubstanceName>METHYL SALICYLATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-10-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190329</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>When using this product do not heat, microwave, add to hot water or any container where heating water may cause splattering and result in burns use on eyes or directly on mucous membranes take by mouth or place in nostrils apply to wounds or damaged skin use on bandage skin use, store, pour or spill near heat or open flame.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>73635-5804-3</NDCCode>
<PackageDescription>85.5 mL in 1 JAR (73635-5804-3) </PackageDescription>
<NDC11Code>73635-5804-03</NDC11Code>
<ProductNDC>73635-5804</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Germa Manteca Ubre Plus (red)</ProprietaryName>
<NonProprietaryName>Methyl Salicylate 10%</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20190329</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M017</ApplicationNumber>
<LabelerName>Germa Products, LLC</LabelerName>
<SubstanceName>METHYL SALICYLATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-10-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190329</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>When using this product do not heat, microwave, add to hot water or any container where heating water may cause splattering and result in burns use on eyes or directly on mucous membranes take by mouth or place in nostrils apply to wounds or damaged skin use on bandage skin use, store, pour or spill near heat or open flame.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>73635-5805-3</NDCCode>
<PackageDescription>85.5 mL in 1 CAN (73635-5805-3) </PackageDescription>
<NDC11Code>73635-5805-03</NDC11Code>
<ProductNDC>73635-5805</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Germa Manteca Ubre Plus (tin)</ProprietaryName>
<NonProprietaryName>Methyl Salicylate 10%</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20190329</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M014</ApplicationNumber>
<LabelerName>Germa Products, LLC</LabelerName>
<SubstanceName>METHYL SALICYLATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-10-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190329</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clean skin of lotions, creams, ointments, liniment or sprays ■ Apply liberally to affected area and massage until absorbed into skin ■ Do not apply more than 3 or 4 times daily. ■ Children under 12 years of age, ask a doctor.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>73635-5806-3</NDCCode>
<PackageDescription>88.5 mL in 1 APPLICATOR (73635-5806-3) </PackageDescription>
<NDC11Code>73635-5806-03</NDC11Code>
<ProductNDC>73635-5806</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Germa Linimento Ubre Plus (roll-on)</ProprietaryName>
<NonProprietaryName>Methyl Salicylate 10%</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20190329</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M017</ApplicationNumber>
<LabelerName>Germa Products, LLC</LabelerName>
<SubstanceName>METHYL SALICYLATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-10-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190329</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>When using this product do not ■ heat, microwave, add to hot water or any container where heating water may cause splattering and result in burns ■ use on eyes or directly on mucous membranes ■ take by mouth or place in nostrils ■ apply to wounds or damaged skin ■ use on bandage skin ■ use, store, pour or spill near heat or open flame.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0002-7726-05</NDCCode>
<PackageDescription>5 CARTRIDGE in 1 CARTON (0002-7726-05) / 3 mL in 1 CARTRIDGE (0002-7726-01) </PackageDescription>
<NDC11Code>00002-7726-05</NDC11Code>
<ProductNDC>0002-7726</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lyumjev</ProprietaryName>
<NonProprietaryName>Insulin Lispro-aabc</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20200615</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761109</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LYUMJEV® is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro-aabc is a rapid-acting human insulin analog used to lower blood glucose. Insulin lispro-aabc is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro-aabc differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 daltons, both identical to that of human insulin. Insulin lispro-aabc has the following primary structure:. LYUMJEV (insulin lispro-aabc) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous administration. Each mL of LYUMJEV U-100 contains 100 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 39 mcg zinc ion), and Water for Injection, USP. Each mL of LYUMJEV U-200 contains 200 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 52 mcg zinc ion), and Water for Injection, USP. Hydrochloric acid and/or sodium hydroxide may be added to adjust the pH. LYUMJEV has a pH of 7.0 to 7.8.</Description>
</NDC>
<NDC>
<NDCCode>0002-7728-01</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0002-7728-01) / 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00002-7728-01</NDC11Code>
<ProductNDC>0002-7728</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lyumjev</ProprietaryName>
<NonProprietaryName>Insulin Lispro-aabc</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20200615</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761109</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LYUMJEV® is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro-aabc is a rapid-acting human insulin analog used to lower blood glucose. Insulin lispro-aabc is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro-aabc differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 daltons, both identical to that of human insulin. Insulin lispro-aabc has the following primary structure:. LYUMJEV (insulin lispro-aabc) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous administration. Each mL of LYUMJEV U-100 contains 100 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 39 mcg zinc ion), and Water for Injection, USP. Each mL of LYUMJEV U-200 contains 200 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 52 mcg zinc ion), and Water for Injection, USP. Hydrochloric acid and/or sodium hydroxide may be added to adjust the pH. LYUMJEV has a pH of 7.0 to 7.8.</Description>
</NDC>
<NDC>
<NDCCode>0002-7728-99</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0002-7728-99) / 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00002-7728-99</NDC11Code>
<ProductNDC>0002-7728</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lyumjev</ProprietaryName>
<NonProprietaryName>Insulin Lispro-aabc</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20200615</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761109</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200615</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>LYUMJEV® is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro-aabc is a rapid-acting human insulin analog used to lower blood glucose. Insulin lispro-aabc is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro-aabc differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 daltons, both identical to that of human insulin. Insulin lispro-aabc has the following primary structure:. LYUMJEV (insulin lispro-aabc) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous administration. Each mL of LYUMJEV U-100 contains 100 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 39 mcg zinc ion), and Water for Injection, USP. Each mL of LYUMJEV U-200 contains 200 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 52 mcg zinc ion), and Water for Injection, USP. Hydrochloric acid and/or sodium hydroxide may be added to adjust the pH. LYUMJEV has a pH of 7.0 to 7.8.</Description>
</NDC>
<NDC>
<NDCCode>0002-8207-05</NDCCode>
<PackageDescription>5 SYRINGE in 1 CARTON (0002-8207-05) / 3 mL in 1 SYRINGE (0002-8207-01) </PackageDescription>
<NDC11Code>00002-8207-05</NDC11Code>
<ProductNDC>0002-8207</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lyumjev</ProprietaryName>
<ProprietaryNameSuffix>Kwikpen</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Lispro-aabc</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20200615</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761109</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LYUMJEV® is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro-aabc is a rapid-acting human insulin analog used to lower blood glucose. Insulin lispro-aabc is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro-aabc differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 daltons, both identical to that of human insulin. Insulin lispro-aabc has the following primary structure:. LYUMJEV (insulin lispro-aabc) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous administration. Each mL of LYUMJEV U-100 contains 100 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 39 mcg zinc ion), and Water for Injection, USP. Each mL of LYUMJEV U-200 contains 200 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 52 mcg zinc ion), and Water for Injection, USP. Hydrochloric acid and/or sodium hydroxide may be added to adjust the pH. LYUMJEV has a pH of 7.0 to 7.8.</Description>
</NDC>
<NDC>
<NDCCode>0002-8207-61</NDCCode>
<PackageDescription>1 SYRINGE in 1 CARTON (0002-8207-61) / 3 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00002-8207-61</NDC11Code>
<ProductNDC>0002-8207</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lyumjev</ProprietaryName>
<ProprietaryNameSuffix>Kwikpen</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Lispro-aabc</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20200615</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761109</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200615</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>LYUMJEV® is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro-aabc is a rapid-acting human insulin analog used to lower blood glucose. Insulin lispro-aabc is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro-aabc differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 daltons, both identical to that of human insulin. Insulin lispro-aabc has the following primary structure:. LYUMJEV (insulin lispro-aabc) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous administration. Each mL of LYUMJEV U-100 contains 100 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 39 mcg zinc ion), and Water for Injection, USP. Each mL of LYUMJEV U-200 contains 200 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 52 mcg zinc ion), and Water for Injection, USP. Hydrochloric acid and/or sodium hydroxide may be added to adjust the pH. LYUMJEV has a pH of 7.0 to 7.8.</Description>
</NDC>
<NDC>
<NDCCode>0002-8228-27</NDCCode>
<PackageDescription>2 SYRINGE in 1 CARTON (0002-8228-27) / 3 mL in 1 SYRINGE (0002-8228-01) </PackageDescription>
<NDC11Code>00002-8228-27</NDC11Code>
<ProductNDC>0002-8228</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lyumjev</ProprietaryName>
<ProprietaryNameSuffix>Kwikpen</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Lispro-aabc</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20200615</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761109</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LYUMJEV® is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro-aabc is a rapid-acting human insulin analog used to lower blood glucose. Insulin lispro-aabc is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro-aabc differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 daltons, both identical to that of human insulin. Insulin lispro-aabc has the following primary structure:. LYUMJEV (insulin lispro-aabc) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous administration. Each mL of LYUMJEV U-100 contains 100 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 39 mcg zinc ion), and Water for Injection, USP. Each mL of LYUMJEV U-200 contains 200 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 52 mcg zinc ion), and Water for Injection, USP. Hydrochloric acid and/or sodium hydroxide may be added to adjust the pH. LYUMJEV has a pH of 7.0 to 7.8.</Description>
</NDC>
<NDC>
<NDCCode>0002-8235-05</NDCCode>
<PackageDescription>5 SYRINGE in 1 CARTON (0002-8235-05) / 3 mL in 1 SYRINGE (0002-8235-01) </PackageDescription>
<NDC11Code>00002-8235-05</NDC11Code>
<ProductNDC>0002-8235</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lyumjev</ProprietaryName>
<ProprietaryNameSuffix>Tempo Pen</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Lispro-aabc</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20200615</StartMarketingDate>
<EndMarketingDate>20271106</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761109</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20220929</StartMarketingDatePackage>
<EndMarketingDatePackage>20271106</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LYUMJEV® is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro-aabc is a rapid-acting human insulin analog used to lower blood glucose. Insulin lispro-aabc is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro-aabc differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 daltons, both identical to that of human insulin. Insulin lispro-aabc has the following primary structure:. LYUMJEV (insulin lispro-aabc) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous administration. Each mL of LYUMJEV U-100 contains 100 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 39 mcg zinc ion), and Water for Injection, USP. Each mL of LYUMJEV U-200 contains 200 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 52 mcg zinc ion), and Water for Injection, USP. Hydrochloric acid and/or sodium hydroxide may be added to adjust the pH. LYUMJEV has a pH of 7.0 to 7.8.</Description>
</NDC>
<NDC>
<NDCCode>0002-8235-99</NDCCode>
<PackageDescription>1 SYRINGE in 1 CARTON (0002-8235-99) / 3 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00002-8235-99</NDC11Code>
<ProductNDC>0002-8235</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lyumjev</ProprietaryName>
<ProprietaryNameSuffix>Tempo Pen</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Lispro-aabc</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20200615</StartMarketingDate>
<EndMarketingDate>20271106</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761109</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20240110</StartMarketingDatePackage>
<EndMarketingDatePackage>20271106</EndMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>LYUMJEV® is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro-aabc is a rapid-acting human insulin analog used to lower blood glucose. Insulin lispro-aabc is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro-aabc differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 daltons, both identical to that of human insulin. Insulin lispro-aabc has the following primary structure:. LYUMJEV (insulin lispro-aabc) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous administration. Each mL of LYUMJEV U-100 contains 100 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 39 mcg zinc ion), and Water for Injection, USP. Each mL of LYUMJEV U-200 contains 200 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 52 mcg zinc ion), and Water for Injection, USP. Hydrochloric acid and/or sodium hydroxide may be added to adjust the pH. LYUMJEV has a pH of 7.0 to 7.8.</Description>
</NDC>
<NDC>
<NDCCode>0002-8351-05</NDCCode>
<PackageDescription>5 SYRINGE in 1 CARTON (0002-8351-05) / 3 mL in 1 SYRINGE (0002-8351-01) </PackageDescription>
<NDC11Code>00002-8351-05</NDC11Code>
<ProductNDC>0002-8351</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lyumjev</ProprietaryName>
<ProprietaryNameSuffix>Junior Kwikpen</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Lispro-aabc</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20200615</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761109</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LYUMJEV® is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro-aabc is a rapid-acting human insulin analog used to lower blood glucose. Insulin lispro-aabc is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro-aabc differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 daltons, both identical to that of human insulin. Insulin lispro-aabc has the following primary structure:. LYUMJEV (insulin lispro-aabc) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous administration. Each mL of LYUMJEV U-100 contains 100 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 39 mcg zinc ion), and Water for Injection, USP. Each mL of LYUMJEV U-200 contains 200 units of insulin lispro-aabc and the inactive ingredients: glycerol (12.1 mg), magnesium chloride hexahydrate (1.02 mg), metacresol (3.15 mg), sodium citrate dihydrate (4.41 mg), treprostinil sodium (1.06 mcg), zinc oxide (content adjusted to provide 52 mcg zinc ion), and Water for Injection, USP. Hydrochloric acid and/or sodium hydroxide may be added to adjust the pH. LYUMJEV has a pH of 7.0 to 7.8.</Description>
</NDC>
<NDC>
<NDCCode>0024-5924-10</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0024-5924-10) / 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00024-5924-10</NDC11Code>
<ProductNDC>0024-5924</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Admelog</ProprietaryName>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20171211</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA209196</ApplicationNumber>
<LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>U/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171211</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ADMELOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Insulin lispro has a molecular weight of 5808 Da, identical to that of human insulin. ADMELOG (insulin lispro) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous use. Each mL of ADMELOG contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.88 mg), glycerin (16 mg), metacresol (3.15 mg), zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Insulin lispro has a pH of 7.0 to 7.8. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide. ADMELOG is latex free.</Description>
</NDC>
<NDC>
<NDCCode>0024-5925-00</NDCCode>
<PackageDescription>1 SYRINGE in 1 CARTON (0024-5925-00) / 3 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00024-5925-00</NDC11Code>
<ProductNDC>0024-5925</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Admelog</ProprietaryName>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20171211</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA209196</ApplicationNumber>
<LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>U/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171211</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>ADMELOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Insulin lispro has a molecular weight of 5808 Da, identical to that of human insulin. ADMELOG (insulin lispro) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous use. Each mL of ADMELOG contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.88 mg), glycerin (16 mg), metacresol (3.15 mg), zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Insulin lispro has a pH of 7.0 to 7.8. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide. ADMELOG is latex free.</Description>
</NDC>
<NDC>
<NDCCode>0024-5925-05</NDCCode>
<PackageDescription>5 SYRINGE in 1 CARTON (0024-5925-05) / 3 mL in 1 SYRINGE (0024-5925-01) </PackageDescription>
<NDC11Code>00024-5925-05</NDC11Code>
<ProductNDC>0024-5925</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Admelog</ProprietaryName>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20171211</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA209196</ApplicationNumber>
<LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>U/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171211</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ADMELOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Insulin lispro has a molecular weight of 5808 Da, identical to that of human insulin. ADMELOG (insulin lispro) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous use. Each mL of ADMELOG contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.88 mg), glycerin (16 mg), metacresol (3.15 mg), zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Insulin lispro has a pH of 7.0 to 7.8. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide. ADMELOG is latex free.</Description>
</NDC>
<NDC>
<NDCCode>0024-5926-05</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (0024-5926-05) / 3 mL in 1 VIAL</PackageDescription>
<NDC11Code>00024-5926-05</NDC11Code>
<ProductNDC>0024-5926</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Admelog</ProprietaryName>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20181019</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA209196</ApplicationNumber>
<LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>U/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181019</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ADMELOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Insulin lispro has a molecular weight of 5808 Da, identical to that of human insulin. ADMELOG (insulin lispro) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous use. Each mL of ADMELOG contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.88 mg), glycerin (16 mg), metacresol (3.15 mg), zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Insulin lispro has a pH of 7.0 to 7.8. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide. ADMELOG is latex free.</Description>
</NDC>
<NDC>
<NDCCode>0169-1833-02</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (0169-1833-02) > 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>00169-1833-02</NDC11Code>
<ProductNDC>0169-1833</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Novolin</ProprietaryName>
<ProprietaryNameSuffix>R</ProprietaryNameSuffix>
<NonProprietaryName>Human Insulin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19910625</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA019938</ApplicationNumber>
<LabelerName>Novo Nordisk</LabelerName>
<SubstanceName>INSULIN HUMAN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin [CS], Insulin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19910625</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NOVOLIN R is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin human is a short-acting human insulin produced by recombinant DNA technology, utilizing Saccharomyces cerevisiae (baker’s yeast) as the production organism and has the empirical formula C257H383N65O77S6 with a molecular weight of 5808 Da. Figure 1: Structural formula of NOVOLIN R. NOVOLIN R (insulin human) injection is a sterile, clear and colorless solution for subcutaneous or intravenous use. Each mililiter of NOVOLIN R contains 100 units of insulin human, and glycerin (16 mg), metacresol (3 mg), zinc (approximately 21 mcg/mL) and Water for Injection. Hydrochloric acid 2N and sodium hydroxide 2N may be added during manufacture to adjust pH. The pH is 7.0 to 7.8.</Description>
</NDC>
<NDC>
<NDCCode>0169-1833-11</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (0169-1833-11) > 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>00169-1833-11</NDC11Code>
<ProductNDC>0169-1833</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Novolin</ProprietaryName>
<ProprietaryNameSuffix>R</ProprietaryNameSuffix>
<NonProprietaryName>Human Insulin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19910625</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA019938</ApplicationNumber>
<LabelerName>Novo Nordisk</LabelerName>
<SubstanceName>INSULIN HUMAN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin [CS], Insulin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19910625</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NOVOLIN R is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin human is a short-acting human insulin produced by recombinant DNA technology, utilizing Saccharomyces cerevisiae (baker’s yeast) as the production organism and has the empirical formula C257H383N65O77S6 with a molecular weight of 5808 Da. Figure 1: Structural formula of NOVOLIN R. NOVOLIN R (insulin human) injection is a sterile, clear and colorless solution for subcutaneous or intravenous use. Each mililiter of NOVOLIN R contains 100 units of insulin human, and glycerin (16 mg), metacresol (3 mg), zinc (approximately 21 mcg/mL) and Water for Injection. Hydrochloric acid 2N and sodium hydroxide 2N may be added during manufacture to adjust pH. The pH is 7.0 to 7.8.</Description>
</NDC>
<NDC>
<NDCCode>0169-3003-15</NDCCode>
<PackageDescription>5 SYRINGE, PLASTIC in 1 CARTON (0169-3003-15) > 3 mL in 1 SYRINGE, PLASTIC (0169-3003-01) </PackageDescription>
<NDC11Code>00169-3003-15</NDC11Code>
<ProductNDC>0169-3003</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Novolin</ProprietaryName>
<ProprietaryNameSuffix>R</ProprietaryNameSuffix>
<NonProprietaryName>Human Insulin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190906</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA019938</ApplicationNumber>
<LabelerName>Novo Nordisk</LabelerName>
<SubstanceName>INSULIN HUMAN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin [CS], Insulin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190906</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NOVOLIN R is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin human is a short-acting human insulin produced by recombinant DNA technology, utilizing Saccharomyces cerevisiae (baker’s yeast) as the production organism and has the empirical formula C257H383N65O77S6 with a molecular weight of 5808 Da. Figure 1: Structural formula of NOVOLIN R. NOVOLIN R (insulin human) injection is a sterile, clear and colorless solution for subcutaneous or intravenous use. Each mililiter of NOVOLIN R contains 100 units of insulin human, and glycerin (16 mg), metacresol (3 mg), zinc (approximately 21 mcg/mL) and Water for Injection. Hydrochloric acid 2N and sodium hydroxide 2N may be added during manufacture to adjust pH. The pH is 7.0 to 7.8.</Description>
</NDC>
<NDC>
<NDCCode>0169-3003-25</NDCCode>
<PackageDescription>5 SYRINGE, PLASTIC in 1 CARTON (0169-3003-25) > 3 mL in 1 SYRINGE, PLASTIC (0169-3003-12) </PackageDescription>
<NDC11Code>00169-3003-25</NDC11Code>
<ProductNDC>0169-3003</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Novolin</ProprietaryName>
<ProprietaryNameSuffix>R</ProprietaryNameSuffix>
<NonProprietaryName>Human Insulin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190906</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA019938</ApplicationNumber>
<LabelerName>Novo Nordisk</LabelerName>
<SubstanceName>INSULIN HUMAN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin [CS], Insulin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190906</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NOVOLIN R is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin human is a short-acting human insulin produced by recombinant DNA technology, utilizing Saccharomyces cerevisiae (baker’s yeast) as the production organism and has the empirical formula C257H383N65O77S6 with a molecular weight of 5808 Da. Figure 1: Structural formula of NOVOLIN R. NOVOLIN R (insulin human) injection is a sterile, clear and colorless solution for subcutaneous or intravenous use. Each mililiter of NOVOLIN R contains 100 units of insulin human, and glycerin (16 mg), metacresol (3 mg), zinc (approximately 21 mcg/mL) and Water for Injection. Hydrochloric acid 2N and sodium hydroxide 2N may be added during manufacture to adjust pH. The pH is 7.0 to 7.8.</Description>
</NDC>
<NDC>
<NDCCode>0169-3004-15</NDCCode>
<PackageDescription>5 SYRINGE, PLASTIC in 1 CARTON (0169-3004-15) > 3 mL in 1 SYRINGE, PLASTIC (0169-3004-01) </PackageDescription>
<NDC11Code>00169-3004-15</NDC11Code>
<ProductNDC>0169-3004</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Novolin</ProprietaryName>
<ProprietaryNameSuffix>N</ProprietaryNameSuffix>
<NonProprietaryName>Human Insulin</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190906</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA019959</ApplicationNumber>
<LabelerName>Novo Nordisk</LabelerName>
<SubstanceName>INSULIN HUMAN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin [CS], Insulin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190906</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NOVOLIN N is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin isophane human is produced by recombinant DNA technology, utilizing Saccharomyces cerevisiae (baker’s yeast) as the production organism. Insulin isophane human is a suspension of crystals produced from combining human insulin and protamine sulfate under appropriate conditions for crystal formation. The amino acid sequence of insulin isophane human is identical to human insulin and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 Da. Figure 1: Structural formula of human insulin. NOVOLIN N (insulin isophane human) injectable suspension is an intermediate acting human insulin. It is a sterile, white and cloudy suspension that contains insulin isophane human suspension (NPH) for subcutaneous use. Each milliliter of Novolin N contains 100 units of insulin human, dibasic sodium phosphate (1.9 mg), glycerin (16 mg), metacresol (1.5 mg), phenol (0.65 mg), protamine sulfate (approximately 0.35 mg), zinc (33.5 mcg for the vial or 33.2 mcg for the FlexPen), and Water for Injection. Hydrochloric acid 2N and sodium hydroxide 2N may be added to adjust the pH. The pH is 7.1 to 7.5.</Description>
</NDC>
<NDC>
<NDCCode>0169-3004-25</NDCCode>
<PackageDescription>5 SYRINGE, PLASTIC in 1 CARTON (0169-3004-25) > 3 mL in 1 SYRINGE, PLASTIC (0169-3004-12) </PackageDescription>
<NDC11Code>00169-3004-25</NDC11Code>
<ProductNDC>0169-3004</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Novolin</ProprietaryName>
<ProprietaryNameSuffix>N</ProprietaryNameSuffix>
<NonProprietaryName>Human Insulin</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190906</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA019959</ApplicationNumber>
<LabelerName>Novo Nordisk</LabelerName>
<SubstanceName>INSULIN HUMAN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin [CS], Insulin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190906</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NOVOLIN N is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin isophane human is produced by recombinant DNA technology, utilizing Saccharomyces cerevisiae (baker’s yeast) as the production organism. Insulin isophane human is a suspension of crystals produced from combining human insulin and protamine sulfate under appropriate conditions for crystal formation. The amino acid sequence of insulin isophane human is identical to human insulin and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 Da. Figure 1: Structural formula of human insulin. NOVOLIN N (insulin isophane human) injectable suspension is an intermediate acting human insulin. It is a sterile, white and cloudy suspension that contains insulin isophane human suspension (NPH) for subcutaneous use. Each milliliter of Novolin N contains 100 units of insulin human, dibasic sodium phosphate (1.9 mg), glycerin (16 mg), metacresol (1.5 mg), phenol (0.65 mg), protamine sulfate (approximately 0.35 mg), zinc (33.5 mcg for the vial or 33.2 mcg for the FlexPen), and Water for Injection. Hydrochloric acid 2N and sodium hydroxide 2N may be added to adjust the pH. The pH is 7.1 to 7.5.</Description>
</NDC>
<NDC>
<NDCCode>0169-3007-15</NDCCode>
<PackageDescription>5 SYRINGE, PLASTIC in 1 CARTON (0169-3007-15) > 3 mL in 1 SYRINGE, PLASTIC (0169-3007-01) </PackageDescription>
<NDC11Code>00169-3007-15</NDC11Code>
<ProductNDC>0169-3007</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Novolin</ProprietaryName>
<ProprietaryNameSuffix>70/30</ProprietaryNameSuffix>
<NonProprietaryName>Human Insulin</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20180601</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA019991</ApplicationNumber>
<LabelerName>Novo Nordisk</LabelerName>
<SubstanceName>INSULIN HUMAN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin [CS], Insulin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NOVOLIN 70/30 is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus. Limitations of Use. In NOVOLIN 70/30, the proportions of short-acting and intermediate-acting insulins are fixed and do not allow for basal versus prandial dose adjustments.</IndicationAndUsage>
<Description>Insulin human is produced by recombinant DNA technology, utilizing Saccharomyces cerevisiae (baker’s yeast) as the production organism. The amino acid sequence of insulin human is identical to human insulin and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 Da. NOVOLIN 70/30 (insulin isophane human and insulin human) injectable suspension is a mixture of 70% of insulin isophane human, an intermediate-acting insulin, and 30% of insulin human, a short-acting insulin. NOVOLIN 70/30 is a suspension of crystals produced from combining insulin human and protamine sulfate under appropriate conditions for crystal formation and mixing with insulin human injection. Figure 1: Structural formula of human insulin. NOVOLIN 70/30 is a sterile, white and cloudy injectable suspension that contains insulin isophane human suspension (NPH) and insulin human injection (regular) for subcutaneous use. Each milliliter of NOVOLIN 70/30 contains 100 units of insulin human, dibasic sodium phosphate (1.9 mg), glycerin (16 mg), metacresol (1.5 mg), phenol (0.65 mg), protamine sulfate (approximately 0.25 mg), zinc (20.5 mcg/mL for the vial or 30.1 mcg for the FlexPen), and Water for Injection. Hydrochloric acid 2N and sodium hydroxide 2N may be added during manufacture to adjust the pH. The pH is 7.1-7.5.</Description>
</NDC>
<NDC>
<NDCCode>0169-3007-25</NDCCode>
<PackageDescription>5 SYRINGE, PLASTIC in 1 CARTON (0169-3007-25) > 3 mL in 1 SYRINGE, PLASTIC (0169-3007-12) </PackageDescription>
<NDC11Code>00169-3007-25</NDC11Code>
<ProductNDC>0169-3007</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Novolin</ProprietaryName>
<ProprietaryNameSuffix>70/30</ProprietaryNameSuffix>
<NonProprietaryName>Human Insulin</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20180601</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA019991</ApplicationNumber>
<LabelerName>Novo Nordisk</LabelerName>
<SubstanceName>INSULIN HUMAN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin [CS], Insulin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NOVOLIN 70/30 is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus. Limitations of Use. In NOVOLIN 70/30, the proportions of short-acting and intermediate-acting insulins are fixed and do not allow for basal versus prandial dose adjustments.</IndicationAndUsage>
<Description>Insulin human is produced by recombinant DNA technology, utilizing Saccharomyces cerevisiae (baker’s yeast) as the production organism. The amino acid sequence of insulin human is identical to human insulin and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 Da. NOVOLIN 70/30 (insulin isophane human and insulin human) injectable suspension is a mixture of 70% of insulin isophane human, an intermediate-acting insulin, and 30% of insulin human, a short-acting insulin. NOVOLIN 70/30 is a suspension of crystals produced from combining insulin human and protamine sulfate under appropriate conditions for crystal formation and mixing with insulin human injection. Figure 1: Structural formula of human insulin. NOVOLIN 70/30 is a sterile, white and cloudy injectable suspension that contains insulin isophane human suspension (NPH) and insulin human injection (regular) for subcutaneous use. Each milliliter of NOVOLIN 70/30 contains 100 units of insulin human, dibasic sodium phosphate (1.9 mg), glycerin (16 mg), metacresol (1.5 mg), phenol (0.65 mg), protamine sulfate (approximately 0.25 mg), zinc (20.5 mcg/mL for the vial or 30.1 mcg for the FlexPen), and Water for Injection. Hydrochloric acid 2N and sodium hydroxide 2N may be added during manufacture to adjust the pH. The pH is 7.1-7.5.</Description>
</NDC>
<NDC>
<NDCCode>50090-0352-0</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (50090-0352-0) > 10 mL in 1 VIAL (50090-0352-9)</PackageDescription>
<NDC11Code>50090-0352-00</NDC11Code>
<ProductNDC>50090-0352</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Humulin</ProprietaryName>
<ProprietaryNameSuffix>N </ProprietaryNameSuffix>
<NonProprietaryName>Insulin Human</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19830627</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018781</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>INSULIN HUMAN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>HUMULIN N is an intermediate-acting recombinant human insulin indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>HUMULIN N (human insulin [rDNA origin] isophane suspension) is a human insulin suspension. Human insulin is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. HUMULIN N is a suspension of crystals produced from combining human insulin and protamine sulfate under appropriate conditions for crystal formation. The amino acid sequence of HUMULIN N is identical to human insulin and has the empirical formula C257H383N65O77S6 with a molecular weight of 5808. HUMULIN N is a sterile white suspension. Each milliliter of HUMULIN N contains 100 units of insulin human, 0.35 mg of protamine sulfate, 16 mg of glycerin, 3.78 mg of dibasic sodium phosphate, 1.6 mg of metacresol, 0.65 mg of phenol, zinc oxide content adjusted to provide 0.025 mg zinc ion, and Water for Injection. The pH is 7.0 to 7.5. Sodium hydroxide and/or hydrochloric acid may be added during manufacture to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>50090-0444-0</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (50090-0444-0) > 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>50090-0444-00</NDC11Code>
<ProductNDC>50090-0444</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Humulin</ProprietaryName>
<ProprietaryNameSuffix>70/30 </ProprietaryNameSuffix>
<NonProprietaryName>Insulin Human</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19890626</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019717</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>INSULIN HUMAN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>HUMULIN 70/30 is a fixed ratio premix recombinant human insulin formulation indicated to improve glycemic control in adult patients with diabetes mellitus.</IndicationAndUsage>
<Description>HUMULIN 70/30 (70% human insulin isophane suspension and 30% human insulin injection [rDNA origin]) is a human insulin suspension. Human insulin is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. HUMULIN 70/30 is a suspension of crystals produced from combining human insulin and protamine sulfate under appropriate conditions for crystal formation and mixing with human insulin injection. The amino acid sequence of HUMULIN 70/30 is identical to human insulin and has the empirical formula C257H383N65O77S6 with a molecular weight of 5808. HUMULIN 70/30 is a sterile white suspension. Each milliliter of HUMULIN 70/30 contains 100 units of insulin human, 0.24 mg of protamine sulfate, 16 mg of glycerin, 3.78 mg of dibasic sodium phosphate, 1.6 mg of metacresol, 0.65 mg of phenol, zinc oxide content adjusted to provide 0.025 mg zinc ion, and Water for Injection. The pH is 7.0 to 7.8. Sodium hydroxide and/or hydrochloric acid may be added during manufacture to adjust the pH.</Description>
</NDC>
</NDCList>