{
"NDC": [
{
"NDCCode": "74146-242-97",
"PackageDescription": "6 CANISTER in 1 BOX (74146-242-97) > 647.3 mL in 1 CANISTER (74146-242-92) ",
"NDC11Code": "74146-0242-97",
"ProductNDC": "74146-242",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Instant Wipe",
"NonProprietaryName": "Benzalkonium Chloride",
"DosageFormName": "CLOTH",
"RouteName": "TOPICAL",
"StartMarketingDate": "20201201",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "GM Industrial, Inc.",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2022-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20201201",
"SamplePackage": "N",
"IndicationAndUsage": "For hand sanitizing to decrease bacteria on the skin. Recommended for repeated use."
},
{
"NDCCode": "74146-242-87",
"PackageDescription": "4 CANISTER in 1 BOX (74146-242-87) > 810.1 mL in 1 CANISTER (74146-242-84) ",
"NDC11Code": "74146-0242-87",
"ProductNDC": "74146-242",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Instant Wipe",
"NonProprietaryName": "Benzalkonium Chloride",
"DosageFormName": "CLOTH",
"RouteName": "TOPICAL",
"StartMarketingDate": "20201201",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "GM Industrial, Inc.",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2022-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20201201",
"SamplePackage": "N",
"IndicationAndUsage": "For hand sanitizing to decrease bacteria on the skin. Recommended for repeated use."
},
{
"NDCCode": "0173-0874-10",
"PackageDescription": "1 INHALER in 1 CARTON (0173-0874-10) / 30 POWDER in 1 INHALER",
"NDC11Code": "00173-0874-10",
"ProductNDC": "0173-0874",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Arnuity Ellipta",
"NonProprietaryName": "Fluticasone Furoate",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20140820",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205625",
"LabelerName": "GlaxoSmithKline LLC",
"SubstanceName": "FLUTICASONE FUROATE",
"StrengthNumber": "100",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140820",
"SamplePackage": "N",
"IndicationAndUsage": "ARNUITY ELLIPTA is indicated for the maintenance treatment of asthma in adult and pediatric patients aged 5 years and older. Limitations of Use. ARNUITY ELLIPTA is NOT indicated for the relief of acute bronchospasm.",
"Description": "ARNUITY ELLIPTA is an inhalation powder drug product for delivery of fluticasone furoate (an ICS) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. ARNUITY ELLIPTA is a light grey and orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.45, 12.40, or 12.30 mg, respectively) for a total powder blend of 12.5 mg per blister. The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ARNUITY ELLIPTA 50 mcg, ARNUITY ELLIPTA 100 mcg, and ARNUITY ELLIPTA 200 mcg delivers 46, 90, and 182 mcg, respectively, of fluticasone furoate per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with asthma and a mean FEV1 of 2.55 L/sec (range: 1.63 to 3.97 L/sec), mean peak inspiratory flow through the ELLIPTA inhaler was 103.2 L/min (range: 71.2 to 133.1 L/min). In pediatric subjects with asthma aged 5 to 11 years and a mean peak expiratory flow rate of 242 L/min (range: 130 to 420 L/min), mean peak inspiratory flow through the ELLIPTA inhaler was 51.8 L/min (range: 26.8 to 89.9 L/min). Therefore, the ELLIPTA inhaler is able to deliver the dose of fluticasone furoate in patients with asthma. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0173-0874-14",
"PackageDescription": "1 INHALER in 1 CARTON (0173-0874-14) / 14 POWDER in 1 INHALER",
"NDC11Code": "00173-0874-14",
"ProductNDC": "0173-0874",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Arnuity Ellipta",
"NonProprietaryName": "Fluticasone Furoate",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20140820",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205625",
"LabelerName": "GlaxoSmithKline LLC",
"SubstanceName": "FLUTICASONE FUROATE",
"StrengthNumber": "100",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140820",
"SamplePackage": "N",
"IndicationAndUsage": "ARNUITY ELLIPTA is indicated for the maintenance treatment of asthma in adult and pediatric patients aged 5 years and older. Limitations of Use. ARNUITY ELLIPTA is NOT indicated for the relief of acute bronchospasm.",
"Description": "ARNUITY ELLIPTA is an inhalation powder drug product for delivery of fluticasone furoate (an ICS) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. ARNUITY ELLIPTA is a light grey and orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.45, 12.40, or 12.30 mg, respectively) for a total powder blend of 12.5 mg per blister. The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ARNUITY ELLIPTA 50 mcg, ARNUITY ELLIPTA 100 mcg, and ARNUITY ELLIPTA 200 mcg delivers 46, 90, and 182 mcg, respectively, of fluticasone furoate per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with asthma and a mean FEV1 of 2.55 L/sec (range: 1.63 to 3.97 L/sec), mean peak inspiratory flow through the ELLIPTA inhaler was 103.2 L/min (range: 71.2 to 133.1 L/min). In pediatric subjects with asthma aged 5 to 11 years and a mean peak expiratory flow rate of 242 L/min (range: 130 to 420 L/min), mean peak inspiratory flow through the ELLIPTA inhaler was 51.8 L/min (range: 26.8 to 89.9 L/min). Therefore, the ELLIPTA inhaler is able to deliver the dose of fluticasone furoate in patients with asthma. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0173-0876-10",
"PackageDescription": "1 INHALER in 1 CARTON (0173-0876-10) / 30 POWDER in 1 INHALER",
"NDC11Code": "00173-0876-10",
"ProductNDC": "0173-0876",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Arnuity Ellipta",
"NonProprietaryName": "Fluticasone Furoate",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20140820",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205625",
"LabelerName": "GlaxoSmithKline LLC",
"SubstanceName": "FLUTICASONE FUROATE",
"StrengthNumber": "200",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140820",
"SamplePackage": "N",
"IndicationAndUsage": "ARNUITY ELLIPTA is indicated for the maintenance treatment of asthma in adult and pediatric patients aged 5 years and older. Limitations of Use. ARNUITY ELLIPTA is NOT indicated for the relief of acute bronchospasm.",
"Description": "ARNUITY ELLIPTA is an inhalation powder drug product for delivery of fluticasone furoate (an ICS) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. ARNUITY ELLIPTA is a light grey and orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.45, 12.40, or 12.30 mg, respectively) for a total powder blend of 12.5 mg per blister. The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ARNUITY ELLIPTA 50 mcg, ARNUITY ELLIPTA 100 mcg, and ARNUITY ELLIPTA 200 mcg delivers 46, 90, and 182 mcg, respectively, of fluticasone furoate per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with asthma and a mean FEV1 of 2.55 L/sec (range: 1.63 to 3.97 L/sec), mean peak inspiratory flow through the ELLIPTA inhaler was 103.2 L/min (range: 71.2 to 133.1 L/min). In pediatric subjects with asthma aged 5 to 11 years and a mean peak expiratory flow rate of 242 L/min (range: 130 to 420 L/min), mean peak inspiratory flow through the ELLIPTA inhaler was 51.8 L/min (range: 26.8 to 89.9 L/min). Therefore, the ELLIPTA inhaler is able to deliver the dose of fluticasone furoate in patients with asthma. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0173-0876-14",
"PackageDescription": "1 INHALER in 1 CARTON (0173-0876-14) / 14 POWDER in 1 INHALER",
"NDC11Code": "00173-0876-14",
"ProductNDC": "0173-0876",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Arnuity Ellipta",
"NonProprietaryName": "Fluticasone Furoate",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20140820",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205625",
"LabelerName": "GlaxoSmithKline LLC",
"SubstanceName": "FLUTICASONE FUROATE",
"StrengthNumber": "200",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140820",
"SamplePackage": "N",
"IndicationAndUsage": "ARNUITY ELLIPTA is indicated for the maintenance treatment of asthma in adult and pediatric patients aged 5 years and older. Limitations of Use. ARNUITY ELLIPTA is NOT indicated for the relief of acute bronchospasm.",
"Description": "ARNUITY ELLIPTA is an inhalation powder drug product for delivery of fluticasone furoate (an ICS) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. ARNUITY ELLIPTA is a light grey and orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.45, 12.40, or 12.30 mg, respectively) for a total powder blend of 12.5 mg per blister. The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ARNUITY ELLIPTA 50 mcg, ARNUITY ELLIPTA 100 mcg, and ARNUITY ELLIPTA 200 mcg delivers 46, 90, and 182 mcg, respectively, of fluticasone furoate per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with asthma and a mean FEV1 of 2.55 L/sec (range: 1.63 to 3.97 L/sec), mean peak inspiratory flow through the ELLIPTA inhaler was 103.2 L/min (range: 71.2 to 133.1 L/min). In pediatric subjects with asthma aged 5 to 11 years and a mean peak expiratory flow rate of 242 L/min (range: 130 to 420 L/min), mean peak inspiratory flow through the ELLIPTA inhaler was 51.8 L/min (range: 26.8 to 89.9 L/min). Therefore, the ELLIPTA inhaler is able to deliver the dose of fluticasone furoate in patients with asthma. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0173-0888-10",
"PackageDescription": "1 INHALER in 1 CARTON (0173-0888-10) / 30 POWDER in 1 INHALER",
"NDC11Code": "00173-0888-10",
"ProductNDC": "0173-0888",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Arnuity Ellipta",
"NonProprietaryName": "Fluticasone Furoate",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20180517",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205625",
"LabelerName": "GlaxoSmithKline LLC",
"SubstanceName": "FLUTICASONE FUROATE",
"StrengthNumber": "50",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180517",
"SamplePackage": "N",
"IndicationAndUsage": "ARNUITY ELLIPTA is indicated for the maintenance treatment of asthma in adult and pediatric patients aged 5 years and older. Limitations of Use. ARNUITY ELLIPTA is NOT indicated for the relief of acute bronchospasm.",
"Description": "ARNUITY ELLIPTA is an inhalation powder drug product for delivery of fluticasone furoate (an ICS) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. ARNUITY ELLIPTA is a light grey and orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.45, 12.40, or 12.30 mg, respectively) for a total powder blend of 12.5 mg per blister. The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ARNUITY ELLIPTA 50 mcg, ARNUITY ELLIPTA 100 mcg, and ARNUITY ELLIPTA 200 mcg delivers 46, 90, and 182 mcg, respectively, of fluticasone furoate per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with asthma and a mean FEV1 of 2.55 L/sec (range: 1.63 to 3.97 L/sec), mean peak inspiratory flow through the ELLIPTA inhaler was 103.2 L/min (range: 71.2 to 133.1 L/min). In pediatric subjects with asthma aged 5 to 11 years and a mean peak expiratory flow rate of 242 L/min (range: 130 to 420 L/min), mean peak inspiratory flow through the ELLIPTA inhaler was 51.8 L/min (range: 26.8 to 89.9 L/min). Therefore, the ELLIPTA inhaler is able to deliver the dose of fluticasone furoate in patients with asthma. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0187-0006-10",
"PackageDescription": "1 BOTTLE, PUMP in 1 CARTON (0187-0006-10) / 20 g in 1 BOTTLE, PUMP",
"NDC11Code": "00187-0006-10",
"ProductNDC": "0187-0006",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cabtreo",
"NonProprietaryName": "Clindamycin Phosphate/benzoyl Peroxide/adapalene",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20231020",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA216632",
"LabelerName": "Bausch Health US LLC",
"SubstanceName": "CLINDAMYCIN PHOSPHATE; BENZOYL PEROXIDE; ADAPALENE",
"StrengthNumber": "12; 31; 1.5",
"StrengthUnit": "mg/g; mg/g; mg/g",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE], Retinoid [EPC], Retinoids [CS]",
"Status": "Active",
"LastUpdate": "2025-04-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231020",
"SamplePackage": "N",
"IndicationAndUsage": "CABTREO is indicated for the topical treatment of acne vulgaris in adult and pediatric patients 12 years of age and older.",
"Description": "CABTREO (clindamycin phosphate, adapalene, and benzoyl peroxide) topical gel is a white to off-white, opaque gel. Each gram of CABTREO contains 12 mg (1.2%) clindamycin phosphate, equivalent to 10 mg (1%) clindamycin and 1.5 mg (0.15%) adapalene, and 31 mg (3.1%) benzoyl peroxide. Clindamycin phosphate is a water-soluble ester of the semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Adapalene, a synthetic retinoid, is a naphthoic acid derivative with retinoid-like properties. Benzoyl peroxide is an oxidizing agent. The chemical name for clindamycin phosphate is Methyl-7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside 2-(dihydrogen phosphate). The structural formula for clindamycin phosphate is represented below. Clindamycin phosphate. Molecular Formula: C 18H 34ClN 2O 8PS Molecular Weight: 504.97. The chemical name for adapalene is 6-[3-(1-Adamantyl)-4-methoxyphenyl]-2-naphthoic acid. The structural formula for adapalene is represented below. Adapalene. Molecular Formula: C 28H 28O 3. Molecular Weight: 412.52. The chemical name for benzoyl peroxide is dibenzoyl peroxide. The structural formula for benzoyl peroxide is represented below. Benzoyl peroxide. Molecular Formula: C 14H 10O 4 Molecular Weight: 242.23. CABTREO contains the following inactive ingredients: carbomer homopolymer type C (carbomer 980), potassium hydroxide, propylene glycol, and purified water."
},
{
"NDCCode": "0187-0006-25",
"PackageDescription": "1 BOTTLE, PUMP in 1 CARTON (0187-0006-25) / 50 g in 1 BOTTLE, PUMP",
"NDC11Code": "00187-0006-25",
"ProductNDC": "0187-0006",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cabtreo",
"NonProprietaryName": "Clindamycin Phosphate/benzoyl Peroxide/adapalene",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20231020",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA216632",
"LabelerName": "Bausch Health US LLC",
"SubstanceName": "CLINDAMYCIN PHOSPHATE; BENZOYL PEROXIDE; ADAPALENE",
"StrengthNumber": "12; 31; 1.5",
"StrengthUnit": "mg/g; mg/g; mg/g",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE], Retinoid [EPC], Retinoids [CS]",
"Status": "Active",
"LastUpdate": "2025-04-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231020",
"SamplePackage": "N",
"IndicationAndUsage": "CABTREO is indicated for the topical treatment of acne vulgaris in adult and pediatric patients 12 years of age and older.",
"Description": "CABTREO (clindamycin phosphate, adapalene, and benzoyl peroxide) topical gel is a white to off-white, opaque gel. Each gram of CABTREO contains 12 mg (1.2%) clindamycin phosphate, equivalent to 10 mg (1%) clindamycin and 1.5 mg (0.15%) adapalene, and 31 mg (3.1%) benzoyl peroxide. Clindamycin phosphate is a water-soluble ester of the semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Adapalene, a synthetic retinoid, is a naphthoic acid derivative with retinoid-like properties. Benzoyl peroxide is an oxidizing agent. The chemical name for clindamycin phosphate is Methyl-7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside 2-(dihydrogen phosphate). The structural formula for clindamycin phosphate is represented below. Clindamycin phosphate. Molecular Formula: C 18H 34ClN 2O 8PS Molecular Weight: 504.97. The chemical name for adapalene is 6-[3-(1-Adamantyl)-4-methoxyphenyl]-2-naphthoic acid. The structural formula for adapalene is represented below. Adapalene. Molecular Formula: C 28H 28O 3. Molecular Weight: 412.52. The chemical name for benzoyl peroxide is dibenzoyl peroxide. The structural formula for benzoyl peroxide is represented below. Benzoyl peroxide. Molecular Formula: C 14H 10O 4 Molecular Weight: 242.23. CABTREO contains the following inactive ingredients: carbomer homopolymer type C (carbomer 980), potassium hydroxide, propylene glycol, and purified water."
},
{
"NDCCode": "0187-0006-35",
"PackageDescription": "3.5 g in 1 TUBE (0187-0006-35) ",
"NDC11Code": "00187-0006-35",
"ProductNDC": "0187-0006",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cabtreo",
"NonProprietaryName": "Clindamycin Phosphate/benzoyl Peroxide/adapalene",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20231020",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA216632",
"LabelerName": "Bausch Health US LLC",
"SubstanceName": "CLINDAMYCIN PHOSPHATE; BENZOYL PEROXIDE; ADAPALENE",
"StrengthNumber": "12; 31; 1.5",
"StrengthUnit": "mg/g; mg/g; mg/g",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE], Retinoid [EPC], Retinoids [CS]",
"Status": "Active",
"LastUpdate": "2025-04-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231020",
"SamplePackage": "Y",
"IndicationAndUsage": "CABTREO is indicated for the topical treatment of acne vulgaris in adult and pediatric patients 12 years of age and older.",
"Description": "CABTREO (clindamycin phosphate, adapalene, and benzoyl peroxide) topical gel is a white to off-white, opaque gel. Each gram of CABTREO contains 12 mg (1.2%) clindamycin phosphate, equivalent to 10 mg (1%) clindamycin and 1.5 mg (0.15%) adapalene, and 31 mg (3.1%) benzoyl peroxide. Clindamycin phosphate is a water-soluble ester of the semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Adapalene, a synthetic retinoid, is a naphthoic acid derivative with retinoid-like properties. Benzoyl peroxide is an oxidizing agent. The chemical name for clindamycin phosphate is Methyl-7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside 2-(dihydrogen phosphate). The structural formula for clindamycin phosphate is represented below. Clindamycin phosphate. Molecular Formula: C 18H 34ClN 2O 8PS Molecular Weight: 504.97. The chemical name for adapalene is 6-[3-(1-Adamantyl)-4-methoxyphenyl]-2-naphthoic acid. The structural formula for adapalene is represented below. Adapalene. Molecular Formula: C 28H 28O 3. Molecular Weight: 412.52. The chemical name for benzoyl peroxide is dibenzoyl peroxide. The structural formula for benzoyl peroxide is represented below. Benzoyl peroxide. Molecular Formula: C 14H 10O 4 Molecular Weight: 242.23. CABTREO contains the following inactive ingredients: carbomer homopolymer type C (carbomer 980), potassium hydroxide, propylene glycol, and purified water."
},
{
"NDCCode": "0187-3050-35",
"PackageDescription": "3.5 g in 1 TUBE (0187-3050-35) ",
"NDC11Code": "00187-3050-35",
"ProductNDC": "0187-3050",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Onexton",
"NonProprietaryName": "Clindamycin Phosphate And Benzoyl Peroxide",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20141124",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050819",
"LabelerName": "Bausch Health US, LLC",
"SubstanceName": "CLINDAMYCIN PHOSPHATE; BENZOYL PEROXIDE",
"StrengthNumber": "10; 37.5",
"StrengthUnit": "mg/g; mg/g",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]",
"Status": "Active",
"LastUpdate": "2025-08-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20141124",
"SamplePackage": "N",
"IndicationAndUsage": "ONEXTON® (clindamycin phosphate and benzoyl peroxide) Gel, 1.2%/3.75% is indicated for the topical treatment of acne vulgaris in patients 12 years of age and older.",
"Description": "ONEXTON Gel is a combination product with two active ingredients in a white to off-white, opaque, smooth, aqueous gel formulation intended for topical use. Clindamycin phosphate is a water-soluble ester of the semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)‑hydroxyl group of the parent antibiotic lincomycin. The chemical name for clindamycin phosphate is Methyl 7-chloro-6,7,8-trideoxy-6- (1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside 2-(dihydrogen phosphate). The structural formula for clindamycin phosphate is represented below. Clindamycin phosphate. Molecular Formula: C18H34ClN2O8PS Molecular Weight: 504.97. Benzoyl peroxide is an antibacterial and keratolytic agent. The structural formula for benzoyl peroxide is represented below. Benzoyl peroxide. Molecular Formula: C14H10O4 Molecular Weight: 242.23. ONEXTON Gel contains the following inactive ingredients: carbomer 980, potassium hydroxide, propylene glycol, and purified water. Each gram of ONEXTON Gel contains 12 mg (1.2%) clindamycin phosphate, equivalent to 10 mg (1%) clindamycin, and 37.5 mg (3.75%) benzoyl peroxide."
},
{
"NDCCode": "0187-3050-50",
"PackageDescription": "1 BOTTLE, PUMP in 1 CARTON (0187-3050-50) / 50 g in 1 BOTTLE, PUMP",
"NDC11Code": "00187-3050-50",
"ProductNDC": "0187-3050",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Onexton",
"NonProprietaryName": "Clindamycin Phosphate And Benzoyl Peroxide",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20141124",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050819",
"LabelerName": "Bausch Health US, LLC",
"SubstanceName": "CLINDAMYCIN PHOSPHATE; BENZOYL PEROXIDE",
"StrengthNumber": "10; 37.5",
"StrengthUnit": "mg/g; mg/g",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]",
"Status": "Active",
"LastUpdate": "2025-08-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20141124",
"SamplePackage": "N",
"IndicationAndUsage": "ONEXTON® (clindamycin phosphate and benzoyl peroxide) Gel, 1.2%/3.75% is indicated for the topical treatment of acne vulgaris in patients 12 years of age and older.",
"Description": "ONEXTON Gel is a combination product with two active ingredients in a white to off-white, opaque, smooth, aqueous gel formulation intended for topical use. Clindamycin phosphate is a water-soluble ester of the semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)‑hydroxyl group of the parent antibiotic lincomycin. The chemical name for clindamycin phosphate is Methyl 7-chloro-6,7,8-trideoxy-6- (1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside 2-(dihydrogen phosphate). The structural formula for clindamycin phosphate is represented below. Clindamycin phosphate. Molecular Formula: C18H34ClN2O8PS Molecular Weight: 504.97. Benzoyl peroxide is an antibacterial and keratolytic agent. The structural formula for benzoyl peroxide is represented below. Benzoyl peroxide. Molecular Formula: C14H10O4 Molecular Weight: 242.23. ONEXTON Gel contains the following inactive ingredients: carbomer 980, potassium hydroxide, propylene glycol, and purified water. Each gram of ONEXTON Gel contains 12 mg (1.2%) clindamycin phosphate, equivalent to 10 mg (1%) clindamycin, and 37.5 mg (3.75%) benzoyl peroxide."
},
{
"NDCCode": "0378-8688-35",
"PackageDescription": "1 KIT in 1 CARTON (0378-8688-35) * 5 g in 1 BOTTLE, PLASTIC * 20 g in 1 JAR",
"NDC11Code": "00378-8688-35",
"ProductNDC": "0378-8688",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clindamycin Phosphate And Benzoyl Peroxide",
"NonProprietaryName": "Clindamycin Phosphate And Benzoyl Peroxide",
"DosageFormName": "KIT",
"StartMarketingDate": "20140919",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065443",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"Status": "Active",
"LastUpdate": "2024-12-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140919",
"SamplePackage": "N",
"IndicationAndUsage": "Clindamycin Phosphate and Benzoyl Peroxide Gel, 1%/5% is indicated for the topical treatment of acne vulgaris.",
"Description": "Clindamycin Phosphate and Benzoyl Peroxide Gel, 1%/5% contains clindamycin phosphate, (7(S)-chloro-7-deoxylincomycin-2-phosphate). Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Chemically, clindamycin phosphate is (C18H34ClN2O8PS). The structural formula for clindamycin is represented below. Clindamycin phosphate has a molecular weight of 504.97 and its chemical name is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans- 4-propyl-L-2-pyrrolidinecarboxamido) - 1-thio-L- threo-alpha-D- galacto-octopyranoside 2-(dihydrogen phosphate). Clindamycin Phosphate and Benzoyl Peroxide Gel, 1%/5% also contains benzoyl peroxide, for topical use. Chemically, benzoyl peroxide is (C14H10O4). It has the following structural formula. Benzoyl peroxide has a molecular weight of 242.23. Each gram of Clindamycin Phosphate and Benzoyl Peroxide Gel, 1%/5% contains, as dispensed, 10 mg (1%) clindamycin as phosphate and 50 mg (5%) benzoyl peroxide in a base of carbomer, propylene glycol, potassium hydroxide, and purified water."
},
{
"NDCCode": "0378-8688-54",
"PackageDescription": "1 KIT in 1 CARTON (0378-8688-54) * 10 g in 1 BOTTLE, PLASTIC * 40 g in 1 JAR",
"NDC11Code": "00378-8688-54",
"ProductNDC": "0378-8688",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clindamycin Phosphate And Benzoyl Peroxide",
"NonProprietaryName": "Clindamycin Phosphate And Benzoyl Peroxide",
"DosageFormName": "KIT",
"StartMarketingDate": "20090825",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065443",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"Status": "Active",
"LastUpdate": "2024-12-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090825",
"SamplePackage": "N",
"IndicationAndUsage": "Clindamycin Phosphate and Benzoyl Peroxide Gel, 1%/5% is indicated for the topical treatment of acne vulgaris.",
"Description": "Clindamycin Phosphate and Benzoyl Peroxide Gel, 1%/5% contains clindamycin phosphate, (7(S)-chloro-7-deoxylincomycin-2-phosphate). Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Chemically, clindamycin phosphate is (C18H34ClN2O8PS). The structural formula for clindamycin is represented below. Clindamycin phosphate has a molecular weight of 504.97 and its chemical name is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans- 4-propyl-L-2-pyrrolidinecarboxamido) - 1-thio-L- threo-alpha-D- galacto-octopyranoside 2-(dihydrogen phosphate). Clindamycin Phosphate and Benzoyl Peroxide Gel, 1%/5% also contains benzoyl peroxide, for topical use. Chemically, benzoyl peroxide is (C14H10O4). It has the following structural formula. Benzoyl peroxide has a molecular weight of 242.23. Each gram of Clindamycin Phosphate and Benzoyl Peroxide Gel, 1%/5% contains, as dispensed, 10 mg (1%) clindamycin as phosphate and 50 mg (5%) benzoyl peroxide in a base of carbomer, propylene glycol, potassium hydroxide, and purified water."
},
{
"NDCCode": "0591-3916-68",
"PackageDescription": "1 BOTTLE, PUMP in 1 CARTON (0591-3916-68) / 50 g in 1 BOTTLE, PUMP",
"NDC11Code": "00591-3916-68",
"ProductNDC": "0591-3916",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clindamycin Phosphate And Benzoyl Peroxide",
"NonProprietaryName": "Clindamycin Phosphate And Benzoyl Peroxide",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20190219",
"EndMarketingDate": "20260630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205128",
"LabelerName": "Actavis Pharma, Inc.",
"SubstanceName": "BENZOYL PEROXIDE; CLINDAMYCIN PHOSPHATE",
"StrengthNumber": "25; 10",
"StrengthUnit": "mg/g; mg/g",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]",
"Status": "Deprecated",
"LastUpdate": "2026-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20190219",
"EndMarketingDatePackage": "20260630",
"SamplePackage": "N",
"IndicationAndUsage": "Clindamycin phosphate and benzoyl peroxide gel is indicated for the topical treatment of acne vulgaris in patients 12 years or older.",
"Description": "Clindamycin phosphate and benzoyl peroxide gel, 1.2%/2.5% is a combination product with two active ingredients in a white to off-white, opaque, smooth, aqueous gel formulation intended for topical use. Clindamycin phosphate, USP is a water-soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. The chemical name for clindamycin phosphate, USP is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galactooctopyranoside 2-(dihydrogen phosphate). The structural formula for clindamycin phosphate, USP is represented below:. Clindamycin phosphate, USP. C18H34ClN2O8PS M.W. 504.97. Benzoyl peroxide, USP is an antibacterial and keratolytic agent. The structural formula for benzoyl peroxide, USP is represented below:. Benzoyl peroxide, USP. C14H10O4 M.W. 242.23. Clindamycin phosphate and benzoyl peroxide gel contains the following inactive ingredients: purified water, carbomer 980, propylene glycol, and potassium hydroxide. Each gram of clindamycin phosphate and benzoyl peroxide gel contains 1.2% of clindamycin phosphate, USP which is equivalent to 1% clindamycin."
},
{
"NDCCode": "0781-7161-19",
"PackageDescription": "1 TUBE in 1 CARTON (0781-7161-19) > 45 g in 1 TUBE",
"NDC11Code": "00781-7161-19",
"ProductNDC": "0781-7161",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clindamycin Phosphate And Benzoyl Peroxide",
"NonProprietaryName": "Clindamycin Phosphate And Benzoyl Peroxide",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20160825",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203688",
"LabelerName": "Sandoz Inc.",
"SubstanceName": "BENZOYL PEROXIDE; CLINDAMYCIN PHOSPHATE",
"StrengthNumber": "50; 12",
"StrengthUnit": "mg/g; mg/g",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-01-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20160825",
"SamplePackage": "N",
"IndicationAndUsage": "Clindamycin Phosphate and Benzoyl Peroxide Gel, 1.2% / 5% is a combination of clindamycin phosphate (a lincosamide antibacterial) and benzoyl peroxide indicated for the topical treatment of inflammatory acne vulgaris. (1.1). Limitation of Use:Clindamycin phosphate and benzoyl peroxide gel, 1.2% / 5% has not been demonstrated to have any additional benefit when compared with benzoyl peroxide alone in the same vehicle when used for the treatment of non-inflammatory acne. (1.2).",
"Description": "Clindamycin Phosphate and Benzoyl Peroxide Gel, 1.2% / 5% is a fixed combination product with two active ingredients in a white to slightly yellow, opaque, aqueous gel formulation. Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Clindamycin phosphate is C18H34ClN2O8PS. The structural formula for clindamycin phosphate is represented below. Clindamycin phosphate has a molecular weight of 504.97 and its chemical name is methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside 2-(dihydrogen phosphate). Benzoyl peroxide is C14H10O4. It has the following structural formula. benzoyl peroxide. Benzoyl peroxide has a molecular weight of 242.23. Each gram of clindamycin phosphate and benzoyl peroxide gel, 1.2% / 5% contains 10 mg (1%) clindamycin, as clindamycin phosphate, and 50 mg (5%) benzoyl peroxide in a base consisting of carbopol 980, dimethicone, disodium lauryl sulfosuccinate, edetate disodium, glycerin, methylparaben, poloxamer 182, purified water, and sodium hydroxide."
},
{
"NDCCode": "0781-7263-68",
"PackageDescription": "1 KIT in 1 CARTON (0781-7263-68) * 5 g in 1 BOTTLE (0781-6514-39) * 20 g in 1 JAR (0781-7262-22) ",
"NDC11Code": "00781-7263-68",
"ProductNDC": "0781-7263",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clindamycin And Benzoyl Peroxide",
"NonProprietaryName": "Clindamycin And Benzoyl Peroxide",
"DosageFormName": "KIT",
"StartMarketingDate": "20170815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204087",
"LabelerName": "Sandoz Inc.",
"Status": "Deprecated",
"LastUpdate": "2024-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20170815",
"SamplePackage": "N",
"IndicationAndUsage": "Clindamycin and Benzoyl Peroxide Gel, 1%/5% is indicated for the topical treatment of acne vulgaris.",
"Description": "For Dermatological Use Only - Not for Ophthalmic Use. *Reconstitute Before Dispensing*. Clindamycin and Benzoyl Peroxide Gel, 1%/5% contains clindamycin phosphate, (7(S)-chloro-7-deoxylincomycin-2-phosphate). Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Chemically, clindamycin phosphate is (C18H34ClN2O8PS). The structural formula for clindamycin is represented below. clindamycin phosphate. Clindamycin phosphate has molecular weight of 504.97 and its chemical name is Methyl 7-chloro-6,7, 8-trideoxy-6-(1-methyl-trans- 4-propyl-L-2-pyrrolidinecarboxamido) -1-thio-L- threo-alpha-D- galacto-octopyranoside 2-(dihydrogen phosphate). Clindamycin and benzoyl peroxide gel, 1%/5%also contains benzoyl peroxide, for topical use. Chemically, benzoyl peroxide is (C14H10O4). It has the following structural formula. Benzoyl Peroxide. Benzoyl peroxide has a molecular weight of 242.23. Each gram of clindamycin and benzoyl peroxide gel, 1%/5% contains, as dispensed, 10 mg (1%) clindamycin as phosphate and 50 mg (5%) benzoyl peroxide in a base of carbopol 980, d-limonene, docusate sodium solution, phosphoric acid, propylene glycol, purified water and sodium hydroxide."
},
{
"NDCCode": "0781-7275-43",
"PackageDescription": "1 KIT in 1 CARTON (0781-7275-43) * 7 g in 1 BOTTLE (0781-6525-17) * 20 g in 1 BOTTLE, PUMP (0781-7274-28) ",
"NDC11Code": "00781-7275-43",
"ProductNDC": "0781-7275",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clindamycin And Benzoyl Peroxide",
"NonProprietaryName": "Clindamycin And Benzoyl Peroxide",
"DosageFormName": "KIT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204087",
"LabelerName": "Sandoz Inc.",
"Status": "Deprecated",
"LastUpdate": "2024-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20170815",
"SamplePackage": "N",
"IndicationAndUsage": "Clindamycin and Benzoyl Peroxide Gel, 1%/5% is indicated for the topical treatment of acne vulgaris.",
"Description": "For Dermatological Use Only - Not for Ophthalmic Use. *Reconstitute Before Dispensing*. Clindamycin and Benzoyl Peroxide Gel, 1%/5% contains clindamycin phosphate, (7(S)-chloro-7-deoxylincomycin-2-phosphate). Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Chemically, clindamycin phosphate is (C18H34ClN2O8PS). The structural formula for clindamycin is represented below. clindamycin phosphate. Clindamycin phosphate has molecular weight of 504.97 and its chemical name is Methyl 7-chloro-6,7, 8-trideoxy-6-(1-methyl-trans- 4-propyl-L-2-pyrrolidinecarboxamido) -1-thio-L- threo-alpha-D- galacto-octopyranoside 2-(dihydrogen phosphate). Clindamycin and benzoyl peroxide gel, 1%/5%also contains benzoyl peroxide, for topical use. Chemically, benzoyl peroxide is (C14H10O4). It has the following structural formula. Benzoyl Peroxide. Benzoyl peroxide has a molecular weight of 242.23. Each gram of clindamycin and benzoyl peroxide gel, 1%/5% contains, as dispensed, 10 mg (1%) clindamycin as phosphate and 50 mg (5%) benzoyl peroxide in a base of carbopol 980, d-limonene, docusate sodium solution, phosphoric acid, propylene glycol, purified water and sodium hydroxide."
},
{
"NDCCode": "0781-7287-50",
"PackageDescription": "1 KIT in 1 CARTON (0781-7287-50) * 10 g in 1 BOTTLE (0781-6536-21) * 40 g in 1 BOTTLE, PUMP (0781-7286-44) ",
"NDC11Code": "00781-7287-50",
"ProductNDC": "0781-7287",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clindamycin And Benzoyl Peroxide",
"NonProprietaryName": "Clindamycin And Benzoyl Peroxide",
"DosageFormName": "KIT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204087",
"LabelerName": "Sandoz Inc.",
"Status": "Deprecated",
"LastUpdate": "2024-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20170815",
"SamplePackage": "N",
"IndicationAndUsage": "Clindamycin and Benzoyl Peroxide Gel, 1%/5% is indicated for the topical treatment of acne vulgaris.",
"Description": "For Dermatological Use Only - Not for Ophthalmic Use. *Reconstitute Before Dispensing*. Clindamycin and Benzoyl Peroxide Gel, 1%/5% contains clindamycin phosphate, (7(S)-chloro-7-deoxylincomycin-2-phosphate). Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Chemically, clindamycin phosphate is (C18H34ClN2O8PS). The structural formula for clindamycin is represented below. clindamycin phosphate. Clindamycin phosphate has molecular weight of 504.97 and its chemical name is Methyl 7-chloro-6,7, 8-trideoxy-6-(1-methyl-trans- 4-propyl-L-2-pyrrolidinecarboxamido) -1-thio-L- threo-alpha-D- galacto-octopyranoside 2-(dihydrogen phosphate). Clindamycin and benzoyl peroxide gel, 1%/5%also contains benzoyl peroxide, for topical use. Chemically, benzoyl peroxide is (C14H10O4). It has the following structural formula. Benzoyl Peroxide. Benzoyl peroxide has a molecular weight of 242.23. Each gram of clindamycin and benzoyl peroxide gel, 1%/5% contains, as dispensed, 10 mg (1%) clindamycin as phosphate and 50 mg (5%) benzoyl peroxide in a base of carbopol 980, d-limonene, docusate sodium solution, phosphoric acid, propylene glycol, purified water and sodium hydroxide."
},
{
"NDCCode": "0781-7291-46",
"PackageDescription": "1 KIT in 1 CARTON (0781-7291-46) * 10 g in 1 BOTTLE (0781-6536-21) * 40 g in 1 JAR (0781-7290-48) ",
"NDC11Code": "00781-7291-46",
"ProductNDC": "0781-7291",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clindamycin And Benzoyl Peroxide",
"NonProprietaryName": "Clindamycin And Benzoyl Peroxide",
"DosageFormName": "KIT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204087",
"LabelerName": "Sandoz Inc.",
"Status": "Deprecated",
"LastUpdate": "2024-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20170815",
"SamplePackage": "N",
"IndicationAndUsage": "Clindamycin and Benzoyl Peroxide Gel, 1%/5% is indicated for the topical treatment of acne vulgaris.",
"Description": "For Dermatological Use Only - Not for Ophthalmic Use. *Reconstitute Before Dispensing*. Clindamycin and Benzoyl Peroxide Gel, 1%/5% contains clindamycin phosphate, (7(S)-chloro-7-deoxylincomycin-2-phosphate). Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Chemically, clindamycin phosphate is (C18H34ClN2O8PS). The structural formula for clindamycin is represented below. clindamycin phosphate. Clindamycin phosphate has molecular weight of 504.97 and its chemical name is Methyl 7-chloro-6,7, 8-trideoxy-6-(1-methyl-trans- 4-propyl-L-2-pyrrolidinecarboxamido) -1-thio-L- threo-alpha-D- galacto-octopyranoside 2-(dihydrogen phosphate). Clindamycin and benzoyl peroxide gel, 1%/5%also contains benzoyl peroxide, for topical use. Chemically, benzoyl peroxide is (C14H10O4). It has the following structural formula. Benzoyl Peroxide. Benzoyl peroxide has a molecular weight of 242.23. Each gram of clindamycin and benzoyl peroxide gel, 1%/5% contains, as dispensed, 10 mg (1%) clindamycin as phosphate and 50 mg (5%) benzoyl peroxide in a base of carbopol 980, d-limonene, docusate sodium solution, phosphoric acid, propylene glycol, purified water and sodium hydroxide."
},
{
"NDCCode": "21922-022-06",
"PackageDescription": "1 TUBE in 1 CARTON (21922-022-06) / 45 g in 1 TUBE",
"NDC11Code": "21922-0022-06",
"ProductNDC": "21922-022",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clindamycin Phosphate And Benzoyl Peroxide",
"ProprietaryNameSuffix": "Clindamycin Phosphate And Benzoyl Peroxide",
"NonProprietaryName": "Clindamycin Phosphate And Benzoyl Peroxide",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20210520",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212433",
"LabelerName": "Encube Ethicals, Inc.",
"SubstanceName": "CLINDAMYCIN PHOSPHATE; BENZOYL PEROXIDE",
"StrengthNumber": "10; 50",
"StrengthUnit": "mg/g; mg/g",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]",
"Status": "Active",
"LastUpdate": "2025-09-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210520",
"SamplePackage": "N",
"IndicationAndUsage": "Clindamycin Phosphate and Benzoyl Peroxide Gel, 1.2%/5% is a combination of clindamycin phosphate (a lincosamide antibacterial) and benzoyl peroxide indicated for the topical treatment of inflammatory acne vulgaris. (1.1). Limitation of Use. Clindamycin Phosphate and Benzoyl Peroxide Gel, 1.2%/5% has not been demonstrated to have any additional benefit when compared with benzoyl peroxide alone in the same vehicle when used for the treatment of non-inflammatory acne. (1.2).",
"Description": "Clindamycin Phosphate and Benzoyl Peroxide Gel, 1.2%/5% is a fixed combination product with two active ingredients in a white to slightly yellow, opaque, aqueous gel formulation. Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Clindamycin phosphate is C18H34ClN2O8PS. The structural formula for clindamycin phosphate is represented below. Clindamycin phosphate has a molecular weight of 504.97 and its chemical name is methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L- threo-α-D-galacto-octopyranoside 2-(dihydrogen phosphate). Benzoyl peroxide is C14H14O4. It has the following structural formula. Benzoyl Peroxide has a molecular weight of 242.23. Each gram of Clindamycin Phosphate and Benzoyl Peroxide Gel, 1.2%/5% contains 10 mg (1%) clindamycin, as clindamycin phosphate, and 50 mg (5%) benzoyl peroxide in a base consisting of carbomer homopolymer (type C), dimethicone, edetate disodium, glycerin, poloxamer 182, purified water, silicon dioxide, and sodium hydroxide."
},
{
"NDCCode": "21922-068-43",
"PackageDescription": "1 KIT in 1 CARTON (21922-068-43) * 20 g in 1 JAR (21922-067-62) * 40 g in 1 JAR (21922-067-41) * 28 g in 1 BOTTLE, PUMP (21922-067-39) * 40 g in 1 BOTTLE, PUMP (21922-067-42) * 10 g in 1 BOTTLE (21922-066-12) * 7 g in 1 BOTTLE (21922-066-37) * 5 g in 1 BOTTLE (21922-066-36) ",
"NDC11Code": "21922-0068-43",
"ProductNDC": "21922-068",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clindamycin And Benzoyl Peroxide",
"NonProprietaryName": "Clindamycin And Benzoyl Peroxide",
"DosageFormName": "KIT",
"StartMarketingDate": "20251007",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204087",
"LabelerName": "Encube Ethicals, Inc.",
"Status": "Active",
"LastUpdate": "2025-10-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251007",
"SamplePackage": "N",
"IndicationAndUsage": "Clindamycin and Benzoyl Peroxide Gel, 1%/5% is indicated for the topical treatment of acne vulgaris.",
"Description": "Clindamycin and Benzoyl Peroxide Gel, 1%/5% contains clindamycin phosphate, (7(S)-chloro-7-deoxylincomycin-2-phosphate). Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Chemically, clindamycin phosphate is (C18H34ClN2O8PS). The structural formula for clindamycin is represented below. Clindamycin phosphate has molecular weight of 504.97 and its chemical name is Methyl 7-chloro-6,7, 8-trideoxy-6-(1-methyl-trans- 4-propyl-L-2-pyrrolidinecarboxamido) -1-thio-L- threo-alpha-D- galacto-octopyranoside 2-(dihydrogen phosphate). Clindamycin and benzoyl peroxide gel, 1%/5%also contains benzoyl peroxide, for topical use.Chemically, benzoyl peroxide is (C14H10O4). It has the following structural formula. Benzoyl peroxide has a molecular weight of 242.23. Each gram of clindamycin and benzoyl peroxide gel, 1%/5% contains, as dispensed, 10 mg (1%) clindamycin as phosphate and 50 mg (5%) benzoyl peroxide in a base of carbopol 980, d-limonene, docusate sodium solution, phosphoric acid, propylene glycol, purified water and sodium hydroxide."
},
{
"NDCCode": "21922-068-44",
"PackageDescription": "1 KIT in 1 CARTON (21922-068-44) * 20 g in 1 JAR (21922-067-62) * 40 g in 1 JAR (21922-067-41) * 28 g in 1 BOTTLE, PUMP (21922-067-39) * 40 g in 1 BOTTLE, PUMP (21922-067-42) * 10 g in 1 BOTTLE (21922-066-12) * 7 g in 1 BOTTLE (21922-066-37) * 5 g in 1 BOTTLE (21922-066-36) ",
"NDC11Code": "21922-0068-44",
"ProductNDC": "21922-068",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clindamycin And Benzoyl Peroxide",
"NonProprietaryName": "Clindamycin And Benzoyl Peroxide",
"DosageFormName": "KIT",
"StartMarketingDate": "20251007",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204087",
"LabelerName": "Encube Ethicals, Inc.",
"Status": "Active",
"LastUpdate": "2025-10-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251007",
"SamplePackage": "N",
"IndicationAndUsage": "Clindamycin and Benzoyl Peroxide Gel, 1%/5% is indicated for the topical treatment of acne vulgaris.",
"Description": "Clindamycin and Benzoyl Peroxide Gel, 1%/5% contains clindamycin phosphate, (7(S)-chloro-7-deoxylincomycin-2-phosphate). Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Chemically, clindamycin phosphate is (C18H34ClN2O8PS). The structural formula for clindamycin is represented below. Clindamycin phosphate has molecular weight of 504.97 and its chemical name is Methyl 7-chloro-6,7, 8-trideoxy-6-(1-methyl-trans- 4-propyl-L-2-pyrrolidinecarboxamido) -1-thio-L- threo-alpha-D- galacto-octopyranoside 2-(dihydrogen phosphate). Clindamycin and benzoyl peroxide gel, 1%/5%also contains benzoyl peroxide, for topical use.Chemically, benzoyl peroxide is (C14H10O4). It has the following structural formula. Benzoyl peroxide has a molecular weight of 242.23. Each gram of clindamycin and benzoyl peroxide gel, 1%/5% contains, as dispensed, 10 mg (1%) clindamycin as phosphate and 50 mg (5%) benzoyl peroxide in a base of carbopol 980, d-limonene, docusate sodium solution, phosphoric acid, propylene glycol, purified water and sodium hydroxide."
},
{
"NDCCode": "21922-068-45",
"PackageDescription": "1 KIT in 1 CARTON (21922-068-45) * 20 g in 1 JAR (21922-067-62) * 40 g in 1 JAR (21922-067-41) * 28 g in 1 BOTTLE, PUMP (21922-067-39) * 40 g in 1 BOTTLE, PUMP (21922-067-42) * 10 g in 1 BOTTLE (21922-066-12) * 7 g in 1 BOTTLE (21922-066-37) * 5 g in 1 BOTTLE (21922-066-36) ",
"NDC11Code": "21922-0068-45",
"ProductNDC": "21922-068",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clindamycin And Benzoyl Peroxide",
"NonProprietaryName": "Clindamycin And Benzoyl Peroxide",
"DosageFormName": "KIT",
"StartMarketingDate": "20251007",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204087",
"LabelerName": "Encube Ethicals, Inc.",
"Status": "Active",
"LastUpdate": "2025-10-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251007",
"SamplePackage": "N",
"IndicationAndUsage": "Clindamycin and Benzoyl Peroxide Gel, 1%/5% is indicated for the topical treatment of acne vulgaris.",
"Description": "Clindamycin and Benzoyl Peroxide Gel, 1%/5% contains clindamycin phosphate, (7(S)-chloro-7-deoxylincomycin-2-phosphate). Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Chemically, clindamycin phosphate is (C18H34ClN2O8PS). The structural formula for clindamycin is represented below. Clindamycin phosphate has molecular weight of 504.97 and its chemical name is Methyl 7-chloro-6,7, 8-trideoxy-6-(1-methyl-trans- 4-propyl-L-2-pyrrolidinecarboxamido) -1-thio-L- threo-alpha-D- galacto-octopyranoside 2-(dihydrogen phosphate). Clindamycin and benzoyl peroxide gel, 1%/5%also contains benzoyl peroxide, for topical use.Chemically, benzoyl peroxide is (C14H10O4). It has the following structural formula. Benzoyl peroxide has a molecular weight of 242.23. Each gram of clindamycin and benzoyl peroxide gel, 1%/5% contains, as dispensed, 10 mg (1%) clindamycin as phosphate and 50 mg (5%) benzoyl peroxide in a base of carbopol 980, d-limonene, docusate sodium solution, phosphoric acid, propylene glycol, purified water and sodium hydroxide."
},
{
"NDCCode": "21922-068-46",
"PackageDescription": "1 KIT in 1 CARTON (21922-068-46) * 20 g in 1 JAR (21922-067-62) * 40 g in 1 JAR (21922-067-41) * 28 g in 1 BOTTLE, PUMP (21922-067-39) * 40 g in 1 BOTTLE, PUMP (21922-067-42) * 10 g in 1 BOTTLE (21922-066-12) * 7 g in 1 BOTTLE (21922-066-37) * 5 g in 1 BOTTLE (21922-066-36) ",
"NDC11Code": "21922-0068-46",
"ProductNDC": "21922-068",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clindamycin And Benzoyl Peroxide",
"NonProprietaryName": "Clindamycin And Benzoyl Peroxide",
"DosageFormName": "KIT",
"StartMarketingDate": "20251007",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204087",
"LabelerName": "Encube Ethicals, Inc.",
"Status": "Active",
"LastUpdate": "2025-10-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251007",
"SamplePackage": "N",
"IndicationAndUsage": "Clindamycin and Benzoyl Peroxide Gel, 1%/5% is indicated for the topical treatment of acne vulgaris.",
"Description": "Clindamycin and Benzoyl Peroxide Gel, 1%/5% contains clindamycin phosphate, (7(S)-chloro-7-deoxylincomycin-2-phosphate). Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Chemically, clindamycin phosphate is (C18H34ClN2O8PS). The structural formula for clindamycin is represented below. Clindamycin phosphate has molecular weight of 504.97 and its chemical name is Methyl 7-chloro-6,7, 8-trideoxy-6-(1-methyl-trans- 4-propyl-L-2-pyrrolidinecarboxamido) -1-thio-L- threo-alpha-D- galacto-octopyranoside 2-(dihydrogen phosphate). Clindamycin and benzoyl peroxide gel, 1%/5%also contains benzoyl peroxide, for topical use.Chemically, benzoyl peroxide is (C14H10O4). It has the following structural formula. Benzoyl peroxide has a molecular weight of 242.23. Each gram of clindamycin and benzoyl peroxide gel, 1%/5% contains, as dispensed, 10 mg (1%) clindamycin as phosphate and 50 mg (5%) benzoyl peroxide in a base of carbopol 980, d-limonene, docusate sodium solution, phosphoric acid, propylene glycol, purified water and sodium hydroxide."
},
{
"NDCCode": "21922-074-40",
"PackageDescription": "1 BOTTLE, PUMP in 1 CARTON (21922-074-40) / 50 g in 1 BOTTLE, PUMP",
"NDC11Code": "21922-0074-40",
"ProductNDC": "21922-074",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clindamycin Phosphate And Benzoyl Peroxide",
"NonProprietaryName": "Clindamycin Phosphate And Benzoyl Peroxide",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20241201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207194",
"LabelerName": "Encube Ethicals, Inc.",
"SubstanceName": "CLINDAMYCIN PHOSPHATE; BENZOYL PEROXIDE",
"StrengthNumber": "10; 25",
"StrengthUnit": "mg/g; mg/g",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]",
"Status": "Active",
"LastUpdate": "2026-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241201",
"SamplePackage": "N",
"IndicationAndUsage": "Clindamycin phosphate and benzoyl peroxide gel is indicated for the topical treatment of acne vulgaris in patients 12 years or older.",
"Description": "Clindamycin phosphate and benzoyl peroxide gel, 1.2% / 2.5% is a combination product with two active ingredients in a white to off-white, opaque, smooth, aqueous gel formulation intended for topical use. Clindamycin phosphate is a water-soluble ester of the semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin.The chemical name for clindamycin phosphate is Methyl 7 chloro-6,7,8-trideoxy- 6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo α-D-galacto octopyranoside 2-(dihydrogen phosphate). The structural formula for clindamycin phosphate is represented below:Clindamycin phosphate. Molecular Formula: C18H34CIN2O8PS Molecular Weight: 504.97. Benzoyl peroxide is an antibacterial and keratolytic agent. The structural formula for benzoyl peroxide is represented below:Benzoyl peroxide. Molecular Formula: C14H10O4 Molecular Weight: 242.23. Clindamycin phosphate and benzoyl peroxide gel contains the following inactive ingredients: carbopol 980, poloxamer 182, polysorbate 80, propylene glycol, purified water and sodium hydroxide. Each gram of clindamycin phosphate and benzoyl peroxide gel contains 1.2% of clindamycin phosphate which is equivalent to 1% clindamycin."
},
{
"NDCCode": "43538-176-45",
"PackageDescription": "1 TUBE in 1 CARTON (43538-176-45) / 45 g in 1 TUBE",
"NDC11Code": "43538-0176-45",
"ProductNDC": "43538-176",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Neuac",
"NonProprietaryName": "Clindamycin Phosphate And Benzoyl Peroxide",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140615",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090979",
"LabelerName": "Medimetriks Pharmaceuticals",
"SubstanceName": "CLINDAMYCIN PHOSPHATE; BENZOYL PEROXIDE",
"StrengthNumber": "10; 50",
"StrengthUnit": "mg/g; mg/g",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]",
"Status": "Active",
"LastUpdate": "2023-12-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140615",
"SamplePackage": "N",
"IndicationAndUsage": "Neuac® (clindamycin phosphate and benzoyl peroxide) Gel, 1.2%/5% is a combination of clindamycin phosphate (a lincosamide antibacterial) and benzoyl peroxide indicated for the topical treatment of inflammatory acne vulgaris. (1.1). Limitation of Use. Neuac® (clindamycin phosphate and benzoyl peroxide) Gel, 1.2%/5% has not been demonstrated to have any additional benefit when compared with benzoyl peroxide alone in the same vehicle when used for the treatment of non-inflammatory acne. (1.2).",
"Description": "Neuac® (clindamycin phosphate and benzoyl peroxide) Gel, 1.2%/5% is a fixed combination product with two active ingredients in a white, opaque, aqueous gel formulation. Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Clindamycin phosphate is C18H34ClN2O8PS. The structural formula for clindamycin phosphate is represented below. Clindamycin phosphate has a molecular weight of 504.97 and its chemical name is methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside 2-(dihydrogen phosphate). Benzoyl peroxide is C14H10O4. It has the following structural formula. Benzoyl peroxide has a molecular weight of 242.23. Each gram of Neuac® (clindamycin phosphate and benzoyl peroxide) Gel, 1.2%/5% contains 10 mg (1%) clindamycin, as clindamycin phosphate, and 50 mg (5%) benzoyl peroxide in a base consisting of carbomer homopolymer (type B), hydrochloric acid, methylparaben, dimethicone, propylparaben, purified water and sodium hydroxide."
},
{
"NDCCode": "45802-383-01",
"PackageDescription": "50 g in 1 BOTTLE, PUMP (45802-383-01) ",
"NDC11Code": "45802-0383-01",
"ProductNDC": "45802-383",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clindamycin Phosphate And Benzoyl Peroxide",
"NonProprietaryName": "Clindamycin Phosphate And Benzoyl Peroxide",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20240920",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209610",
"LabelerName": "Padagis Israel Pharmaceuticals Ltd",
"SubstanceName": "CLINDAMYCIN PHOSPHATE; BENZOYL PEROXIDE",
"StrengthNumber": "10; 37.5",
"StrengthUnit": "mg/g; mg/g",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]",
"Status": "Active",
"LastUpdate": "2026-09-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240920",
"SamplePackage": "N",
"IndicationAndUsage": "Clindamycin phosphate and benzoyl peroxide gel is indicated for the topical treatment of acne vulgaris in patients 12 years of age and older.",
"Description": "Clindamycin Phosphate and Benzoyl Peroxide Gel, 1.2%/3.75% is a combination product with two active ingredients in a white to off-white, opaque, smooth, aqueous gel formulation intended for topical use. Clindamycin phosphate is a water-soluble ester of the semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. The chemical name for clindamycin phosphate is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside 2-(dihydrogen phosphate). The structural formula for clindamycin phosphate is represented below. Clindamycin phosphate. Molecular Formula: C18H34ClN2O8PS. Molecular Weight: 504.97. Benzoyl peroxide is an antibacterial and keratolytic agent. The structural formula for benzoyl peroxide is represented below. Benzoyl peroxide. Molecular Formula: C14H10O4. Molecular Weight: 242.23. Clindamycin phosphate and benzoyl peroxide gel contains the following inactive ingredients: carbomer 980, potassium hydroxide, propylene glycol, and purified water. Each gram of clindamycin phosphate and benzoyl peroxide gel contains 12 mg (1.2%) clindamycin phosphate, equivalent to 10 mg (1%) clindamycin, and 37.5 mg (3.75%) benzoyl peroxide."
},
{
"NDCCode": "45802-507-02",
"PackageDescription": "1 KIT in 1 CARTON (45802-507-02) * .6 g in 1 VIAL * 39.4 g in 1 JAR",
"NDC11Code": "45802-0507-02",
"ProductNDC": "45802-507",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clindamycin And Benzoyl Peroxide",
"NonProprietaryName": "Clindamycin And Benzoyl Peroxide",
"DosageFormName": "KIT",
"StartMarketingDate": "20150922",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202440",
"LabelerName": "Padagis Israel Pharmaceuticals Ltd",
"Status": "Active",
"LastUpdate": "2023-10-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150922",
"SamplePackage": "N",
"IndicationAndUsage": "Clindamycin and benzoyl peroxide topical gel, 1%/5% is indicated for the topical treatment of acne vulgaris.",
"Description": "Clindamycin and benzoyl peroxide topical gel, 1%/5% contains clindamycin phosphate, (7(S)-chloro-7-deoxylincomycin-2-phosphate). Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Chemically, clindamycin phosphate is (C18H34ClN2O8PS). The structural formula for clindamycin is represented below. Clindamycin phosphate has a molecular weight of 504.97 and its chemical name is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido) - 1-thio-L- threo-alpha-D-galacto-octopyranoside 2-(dihydrogen phosphate). Clindamycin and benzoyl peroxide topical gel, 1%/5% also contains benzoyl peroxide, for topical use. Chemically, benzoyl peroxide is (C14H10O4). It has the following structural formula. Benzoyl peroxide has a molecular weight of 242.23. Each gram of clindamycin and benzoyl peroxide topical gel, 1%/5% contains, as dispensed, 10 mg (1%) clindamycin as phosphate and 50 mg (5%) benzoyl peroxide in a base of carbomer homopolymer type C, sodium hydroxide, dioctyl sodium sulfosuccinate, and purified water."
},
{
"NDCCode": "45802-507-04",
"PackageDescription": "1 KIT in 1 CARTON (45802-507-04) * .6 g in 1 VIAL * 39.4 g in 1 BOTTLE, PUMP",
"NDC11Code": "45802-0507-04",
"ProductNDC": "45802-507",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clindamycin And Benzoyl Peroxide",
"NonProprietaryName": "Clindamycin And Benzoyl Peroxide",
"DosageFormName": "KIT",
"StartMarketingDate": "20160426",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202440",
"LabelerName": "Padagis Israel Pharmaceuticals Ltd",
"Status": "Active",
"LastUpdate": "2023-10-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20160426",
"SamplePackage": "N",
"IndicationAndUsage": "Clindamycin and benzoyl peroxide topical gel, 1%/5% is indicated for the topical treatment of acne vulgaris.",
"Description": "Clindamycin and benzoyl peroxide topical gel, 1%/5% contains clindamycin phosphate, (7(S)-chloro-7-deoxylincomycin-2-phosphate). Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Chemically, clindamycin phosphate is (C18H34ClN2O8PS). The structural formula for clindamycin is represented below. Clindamycin phosphate has a molecular weight of 504.97 and its chemical name is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido) - 1-thio-L- threo-alpha-D-galacto-octopyranoside 2-(dihydrogen phosphate). Clindamycin and benzoyl peroxide topical gel, 1%/5% also contains benzoyl peroxide, for topical use. Chemically, benzoyl peroxide is (C14H10O4). It has the following structural formula. Benzoyl peroxide has a molecular weight of 242.23. Each gram of clindamycin and benzoyl peroxide topical gel, 1%/5% contains, as dispensed, 10 mg (1%) clindamycin as phosphate and 50 mg (5%) benzoyl peroxide in a base of carbomer homopolymer type C, sodium hydroxide, dioctyl sodium sulfosuccinate, and purified water."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>74146-242-97</NDCCode>
<PackageDescription>6 CANISTER in 1 BOX (74146-242-97) > 647.3 mL in 1 CANISTER (74146-242-92) </PackageDescription>
<NDC11Code>74146-0242-97</NDC11Code>
<ProductNDC>74146-242</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Instant Wipe</ProprietaryName>
<NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>CLOTH</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20201201</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>GM Industrial, Inc.</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For hand sanitizing to decrease bacteria on the skin. Recommended for repeated use.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>74146-242-87</NDCCode>
<PackageDescription>4 CANISTER in 1 BOX (74146-242-87) > 810.1 mL in 1 CANISTER (74146-242-84) </PackageDescription>
<NDC11Code>74146-0242-87</NDC11Code>
<ProductNDC>74146-242</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Instant Wipe</ProprietaryName>
<NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>CLOTH</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20201201</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>GM Industrial, Inc.</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For hand sanitizing to decrease bacteria on the skin. Recommended for repeated use.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0173-0874-10</NDCCode>
<PackageDescription>1 INHALER in 1 CARTON (0173-0874-10) / 30 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00173-0874-10</NDC11Code>
<ProductNDC>0173-0874</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Arnuity Ellipta</ProprietaryName>
<NonProprietaryName>Fluticasone Furoate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20140820</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205625</ApplicationNumber>
<LabelerName>GlaxoSmithKline LLC</LabelerName>
<SubstanceName>FLUTICASONE FUROATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140820</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ARNUITY ELLIPTA is indicated for the maintenance treatment of asthma in adult and pediatric patients aged 5 years and older. Limitations of Use. ARNUITY ELLIPTA is NOT indicated for the relief of acute bronchospasm.</IndicationAndUsage>
<Description>ARNUITY ELLIPTA is an inhalation powder drug product for delivery of fluticasone furoate (an ICS) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. ARNUITY ELLIPTA is a light grey and orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.45, 12.40, or 12.30 mg, respectively) for a total powder blend of 12.5 mg per blister. The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ARNUITY ELLIPTA 50 mcg, ARNUITY ELLIPTA 100 mcg, and ARNUITY ELLIPTA 200 mcg delivers 46, 90, and 182 mcg, respectively, of fluticasone furoate per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with asthma and a mean FEV1 of 2.55 L/sec (range: 1.63 to 3.97 L/sec), mean peak inspiratory flow through the ELLIPTA inhaler was 103.2 L/min (range: 71.2 to 133.1 L/min). In pediatric subjects with asthma aged 5 to 11 years and a mean peak expiratory flow rate of 242 L/min (range: 130 to 420 L/min), mean peak inspiratory flow through the ELLIPTA inhaler was 51.8 L/min (range: 26.8 to 89.9 L/min). Therefore, the ELLIPTA inhaler is able to deliver the dose of fluticasone furoate in patients with asthma. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0173-0874-14</NDCCode>
<PackageDescription>1 INHALER in 1 CARTON (0173-0874-14) / 14 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00173-0874-14</NDC11Code>
<ProductNDC>0173-0874</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Arnuity Ellipta</ProprietaryName>
<NonProprietaryName>Fluticasone Furoate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20140820</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205625</ApplicationNumber>
<LabelerName>GlaxoSmithKline LLC</LabelerName>
<SubstanceName>FLUTICASONE FUROATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140820</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ARNUITY ELLIPTA is indicated for the maintenance treatment of asthma in adult and pediatric patients aged 5 years and older. Limitations of Use. ARNUITY ELLIPTA is NOT indicated for the relief of acute bronchospasm.</IndicationAndUsage>
<Description>ARNUITY ELLIPTA is an inhalation powder drug product for delivery of fluticasone furoate (an ICS) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. ARNUITY ELLIPTA is a light grey and orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.45, 12.40, or 12.30 mg, respectively) for a total powder blend of 12.5 mg per blister. The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ARNUITY ELLIPTA 50 mcg, ARNUITY ELLIPTA 100 mcg, and ARNUITY ELLIPTA 200 mcg delivers 46, 90, and 182 mcg, respectively, of fluticasone furoate per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with asthma and a mean FEV1 of 2.55 L/sec (range: 1.63 to 3.97 L/sec), mean peak inspiratory flow through the ELLIPTA inhaler was 103.2 L/min (range: 71.2 to 133.1 L/min). In pediatric subjects with asthma aged 5 to 11 years and a mean peak expiratory flow rate of 242 L/min (range: 130 to 420 L/min), mean peak inspiratory flow through the ELLIPTA inhaler was 51.8 L/min (range: 26.8 to 89.9 L/min). Therefore, the ELLIPTA inhaler is able to deliver the dose of fluticasone furoate in patients with asthma. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0173-0876-10</NDCCode>
<PackageDescription>1 INHALER in 1 CARTON (0173-0876-10) / 30 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00173-0876-10</NDC11Code>
<ProductNDC>0173-0876</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Arnuity Ellipta</ProprietaryName>
<NonProprietaryName>Fluticasone Furoate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20140820</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205625</ApplicationNumber>
<LabelerName>GlaxoSmithKline LLC</LabelerName>
<SubstanceName>FLUTICASONE FUROATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140820</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ARNUITY ELLIPTA is indicated for the maintenance treatment of asthma in adult and pediatric patients aged 5 years and older. Limitations of Use. ARNUITY ELLIPTA is NOT indicated for the relief of acute bronchospasm.</IndicationAndUsage>
<Description>ARNUITY ELLIPTA is an inhalation powder drug product for delivery of fluticasone furoate (an ICS) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. ARNUITY ELLIPTA is a light grey and orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.45, 12.40, or 12.30 mg, respectively) for a total powder blend of 12.5 mg per blister. The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ARNUITY ELLIPTA 50 mcg, ARNUITY ELLIPTA 100 mcg, and ARNUITY ELLIPTA 200 mcg delivers 46, 90, and 182 mcg, respectively, of fluticasone furoate per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with asthma and a mean FEV1 of 2.55 L/sec (range: 1.63 to 3.97 L/sec), mean peak inspiratory flow through the ELLIPTA inhaler was 103.2 L/min (range: 71.2 to 133.1 L/min). In pediatric subjects with asthma aged 5 to 11 years and a mean peak expiratory flow rate of 242 L/min (range: 130 to 420 L/min), mean peak inspiratory flow through the ELLIPTA inhaler was 51.8 L/min (range: 26.8 to 89.9 L/min). Therefore, the ELLIPTA inhaler is able to deliver the dose of fluticasone furoate in patients with asthma. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0173-0876-14</NDCCode>
<PackageDescription>1 INHALER in 1 CARTON (0173-0876-14) / 14 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00173-0876-14</NDC11Code>
<ProductNDC>0173-0876</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Arnuity Ellipta</ProprietaryName>
<NonProprietaryName>Fluticasone Furoate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20140820</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205625</ApplicationNumber>
<LabelerName>GlaxoSmithKline LLC</LabelerName>
<SubstanceName>FLUTICASONE FUROATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140820</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ARNUITY ELLIPTA is indicated for the maintenance treatment of asthma in adult and pediatric patients aged 5 years and older. Limitations of Use. ARNUITY ELLIPTA is NOT indicated for the relief of acute bronchospasm.</IndicationAndUsage>
<Description>ARNUITY ELLIPTA is an inhalation powder drug product for delivery of fluticasone furoate (an ICS) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. ARNUITY ELLIPTA is a light grey and orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.45, 12.40, or 12.30 mg, respectively) for a total powder blend of 12.5 mg per blister. The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ARNUITY ELLIPTA 50 mcg, ARNUITY ELLIPTA 100 mcg, and ARNUITY ELLIPTA 200 mcg delivers 46, 90, and 182 mcg, respectively, of fluticasone furoate per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with asthma and a mean FEV1 of 2.55 L/sec (range: 1.63 to 3.97 L/sec), mean peak inspiratory flow through the ELLIPTA inhaler was 103.2 L/min (range: 71.2 to 133.1 L/min). In pediatric subjects with asthma aged 5 to 11 years and a mean peak expiratory flow rate of 242 L/min (range: 130 to 420 L/min), mean peak inspiratory flow through the ELLIPTA inhaler was 51.8 L/min (range: 26.8 to 89.9 L/min). Therefore, the ELLIPTA inhaler is able to deliver the dose of fluticasone furoate in patients with asthma. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0173-0888-10</NDCCode>
<PackageDescription>1 INHALER in 1 CARTON (0173-0888-10) / 30 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00173-0888-10</NDC11Code>
<ProductNDC>0173-0888</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Arnuity Ellipta</ProprietaryName>
<NonProprietaryName>Fluticasone Furoate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20180517</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205625</ApplicationNumber>
<LabelerName>GlaxoSmithKline LLC</LabelerName>
<SubstanceName>FLUTICASONE FUROATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180517</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ARNUITY ELLIPTA is indicated for the maintenance treatment of asthma in adult and pediatric patients aged 5 years and older. Limitations of Use. ARNUITY ELLIPTA is NOT indicated for the relief of acute bronchospasm.</IndicationAndUsage>
<Description>ARNUITY ELLIPTA is an inhalation powder drug product for delivery of fluticasone furoate (an ICS) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. ARNUITY ELLIPTA is a light grey and orange plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.45, 12.40, or 12.30 mg, respectively) for a total powder blend of 12.5 mg per blister. The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within the blister is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ARNUITY ELLIPTA 50 mcg, ARNUITY ELLIPTA 100 mcg, and ARNUITY ELLIPTA 200 mcg delivers 46, 90, and 182 mcg, respectively, of fluticasone furoate per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult subjects with asthma and a mean FEV1 of 2.55 L/sec (range: 1.63 to 3.97 L/sec), mean peak inspiratory flow through the ELLIPTA inhaler was 103.2 L/min (range: 71.2 to 133.1 L/min). In pediatric subjects with asthma aged 5 to 11 years and a mean peak expiratory flow rate of 242 L/min (range: 130 to 420 L/min), mean peak inspiratory flow through the ELLIPTA inhaler was 51.8 L/min (range: 26.8 to 89.9 L/min). Therefore, the ELLIPTA inhaler is able to deliver the dose of fluticasone furoate in patients with asthma. The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0187-0006-10</NDCCode>
<PackageDescription>1 BOTTLE, PUMP in 1 CARTON (0187-0006-10) / 20 g in 1 BOTTLE, PUMP</PackageDescription>
<NDC11Code>00187-0006-10</NDC11Code>
<ProductNDC>0187-0006</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cabtreo</ProprietaryName>
<NonProprietaryName>Clindamycin Phosphate/benzoyl Peroxide/adapalene</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20231020</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA216632</ApplicationNumber>
<LabelerName>Bausch Health US LLC</LabelerName>
<SubstanceName>CLINDAMYCIN PHOSPHATE; BENZOYL PEROXIDE; ADAPALENE</SubstanceName>
<StrengthNumber>12; 31; 1.5</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE], Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231020</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CABTREO is indicated for the topical treatment of acne vulgaris in adult and pediatric patients 12 years of age and older.</IndicationAndUsage>
<Description>CABTREO (clindamycin phosphate, adapalene, and benzoyl peroxide) topical gel is a white to off-white, opaque gel. Each gram of CABTREO contains 12 mg (1.2%) clindamycin phosphate, equivalent to 10 mg (1%) clindamycin and 1.5 mg (0.15%) adapalene, and 31 mg (3.1%) benzoyl peroxide. Clindamycin phosphate is a water-soluble ester of the semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Adapalene, a synthetic retinoid, is a naphthoic acid derivative with retinoid-like properties. Benzoyl peroxide is an oxidizing agent. The chemical name for clindamycin phosphate is Methyl-7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside 2-(dihydrogen phosphate). The structural formula for clindamycin phosphate is represented below. Clindamycin phosphate. Molecular Formula: C 18H 34ClN 2O 8PS Molecular Weight: 504.97. The chemical name for adapalene is 6-[3-(1-Adamantyl)-4-methoxyphenyl]-2-naphthoic acid. The structural formula for adapalene is represented below. Adapalene. Molecular Formula: C 28H 28O 3. Molecular Weight: 412.52. The chemical name for benzoyl peroxide is dibenzoyl peroxide. The structural formula for benzoyl peroxide is represented below. Benzoyl peroxide. Molecular Formula: C 14H 10O 4 Molecular Weight: 242.23. CABTREO contains the following inactive ingredients: carbomer homopolymer type C (carbomer 980), potassium hydroxide, propylene glycol, and purified water.</Description>
</NDC>
<NDC>
<NDCCode>0187-0006-25</NDCCode>
<PackageDescription>1 BOTTLE, PUMP in 1 CARTON (0187-0006-25) / 50 g in 1 BOTTLE, PUMP</PackageDescription>
<NDC11Code>00187-0006-25</NDC11Code>
<ProductNDC>0187-0006</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cabtreo</ProprietaryName>
<NonProprietaryName>Clindamycin Phosphate/benzoyl Peroxide/adapalene</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20231020</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA216632</ApplicationNumber>
<LabelerName>Bausch Health US LLC</LabelerName>
<SubstanceName>CLINDAMYCIN PHOSPHATE; BENZOYL PEROXIDE; ADAPALENE</SubstanceName>
<StrengthNumber>12; 31; 1.5</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE], Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231020</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CABTREO is indicated for the topical treatment of acne vulgaris in adult and pediatric patients 12 years of age and older.</IndicationAndUsage>
<Description>CABTREO (clindamycin phosphate, adapalene, and benzoyl peroxide) topical gel is a white to off-white, opaque gel. Each gram of CABTREO contains 12 mg (1.2%) clindamycin phosphate, equivalent to 10 mg (1%) clindamycin and 1.5 mg (0.15%) adapalene, and 31 mg (3.1%) benzoyl peroxide. Clindamycin phosphate is a water-soluble ester of the semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Adapalene, a synthetic retinoid, is a naphthoic acid derivative with retinoid-like properties. Benzoyl peroxide is an oxidizing agent. The chemical name for clindamycin phosphate is Methyl-7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside 2-(dihydrogen phosphate). The structural formula for clindamycin phosphate is represented below. Clindamycin phosphate. Molecular Formula: C 18H 34ClN 2O 8PS Molecular Weight: 504.97. The chemical name for adapalene is 6-[3-(1-Adamantyl)-4-methoxyphenyl]-2-naphthoic acid. The structural formula for adapalene is represented below. Adapalene. Molecular Formula: C 28H 28O 3. Molecular Weight: 412.52. The chemical name for benzoyl peroxide is dibenzoyl peroxide. The structural formula for benzoyl peroxide is represented below. Benzoyl peroxide. Molecular Formula: C 14H 10O 4 Molecular Weight: 242.23. CABTREO contains the following inactive ingredients: carbomer homopolymer type C (carbomer 980), potassium hydroxide, propylene glycol, and purified water.</Description>
</NDC>
<NDC>
<NDCCode>0187-0006-35</NDCCode>
<PackageDescription>3.5 g in 1 TUBE (0187-0006-35) </PackageDescription>
<NDC11Code>00187-0006-35</NDC11Code>
<ProductNDC>0187-0006</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cabtreo</ProprietaryName>
<NonProprietaryName>Clindamycin Phosphate/benzoyl Peroxide/adapalene</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20231020</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA216632</ApplicationNumber>
<LabelerName>Bausch Health US LLC</LabelerName>
<SubstanceName>CLINDAMYCIN PHOSPHATE; BENZOYL PEROXIDE; ADAPALENE</SubstanceName>
<StrengthNumber>12; 31; 1.5</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE], Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231020</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>CABTREO is indicated for the topical treatment of acne vulgaris in adult and pediatric patients 12 years of age and older.</IndicationAndUsage>
<Description>CABTREO (clindamycin phosphate, adapalene, and benzoyl peroxide) topical gel is a white to off-white, opaque gel. Each gram of CABTREO contains 12 mg (1.2%) clindamycin phosphate, equivalent to 10 mg (1%) clindamycin and 1.5 mg (0.15%) adapalene, and 31 mg (3.1%) benzoyl peroxide. Clindamycin phosphate is a water-soluble ester of the semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Adapalene, a synthetic retinoid, is a naphthoic acid derivative with retinoid-like properties. Benzoyl peroxide is an oxidizing agent. The chemical name for clindamycin phosphate is Methyl-7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside 2-(dihydrogen phosphate). The structural formula for clindamycin phosphate is represented below. Clindamycin phosphate. Molecular Formula: C 18H 34ClN 2O 8PS Molecular Weight: 504.97. The chemical name for adapalene is 6-[3-(1-Adamantyl)-4-methoxyphenyl]-2-naphthoic acid. The structural formula for adapalene is represented below. Adapalene. Molecular Formula: C 28H 28O 3. Molecular Weight: 412.52. The chemical name for benzoyl peroxide is dibenzoyl peroxide. The structural formula for benzoyl peroxide is represented below. Benzoyl peroxide. Molecular Formula: C 14H 10O 4 Molecular Weight: 242.23. CABTREO contains the following inactive ingredients: carbomer homopolymer type C (carbomer 980), potassium hydroxide, propylene glycol, and purified water.</Description>
</NDC>
<NDC>
<NDCCode>0187-3050-35</NDCCode>
<PackageDescription>3.5 g in 1 TUBE (0187-3050-35) </PackageDescription>
<NDC11Code>00187-3050-35</NDC11Code>
<ProductNDC>0187-3050</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Onexton</ProprietaryName>
<NonProprietaryName>Clindamycin Phosphate And Benzoyl Peroxide</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20141124</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050819</ApplicationNumber>
<LabelerName>Bausch Health US, LLC</LabelerName>
<SubstanceName>CLINDAMYCIN PHOSPHATE; BENZOYL PEROXIDE</SubstanceName>
<StrengthNumber>10; 37.5</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ONEXTON® (clindamycin phosphate and benzoyl peroxide) Gel, 1.2%/3.75% is indicated for the topical treatment of acne vulgaris in patients 12 years of age and older.</IndicationAndUsage>
<Description>ONEXTON Gel is a combination product with two active ingredients in a white to off-white, opaque, smooth, aqueous gel formulation intended for topical use. Clindamycin phosphate is a water-soluble ester of the semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)‑hydroxyl group of the parent antibiotic lincomycin. The chemical name for clindamycin phosphate is Methyl 7-chloro-6,7,8-trideoxy-6- (1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside 2-(dihydrogen phosphate). The structural formula for clindamycin phosphate is represented below. Clindamycin phosphate. Molecular Formula: C18H34ClN2O8PS Molecular Weight: 504.97. Benzoyl peroxide is an antibacterial and keratolytic agent. The structural formula for benzoyl peroxide is represented below. Benzoyl peroxide. Molecular Formula: C14H10O4 Molecular Weight: 242.23. ONEXTON Gel contains the following inactive ingredients: carbomer 980, potassium hydroxide, propylene glycol, and purified water. Each gram of ONEXTON Gel contains 12 mg (1.2%) clindamycin phosphate, equivalent to 10 mg (1%) clindamycin, and 37.5 mg (3.75%) benzoyl peroxide.</Description>
</NDC>
<NDC>
<NDCCode>0187-3050-50</NDCCode>
<PackageDescription>1 BOTTLE, PUMP in 1 CARTON (0187-3050-50) / 50 g in 1 BOTTLE, PUMP</PackageDescription>
<NDC11Code>00187-3050-50</NDC11Code>
<ProductNDC>0187-3050</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Onexton</ProprietaryName>
<NonProprietaryName>Clindamycin Phosphate And Benzoyl Peroxide</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20141124</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050819</ApplicationNumber>
<LabelerName>Bausch Health US, LLC</LabelerName>
<SubstanceName>CLINDAMYCIN PHOSPHATE; BENZOYL PEROXIDE</SubstanceName>
<StrengthNumber>10; 37.5</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ONEXTON® (clindamycin phosphate and benzoyl peroxide) Gel, 1.2%/3.75% is indicated for the topical treatment of acne vulgaris in patients 12 years of age and older.</IndicationAndUsage>
<Description>ONEXTON Gel is a combination product with two active ingredients in a white to off-white, opaque, smooth, aqueous gel formulation intended for topical use. Clindamycin phosphate is a water-soluble ester of the semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)‑hydroxyl group of the parent antibiotic lincomycin. The chemical name for clindamycin phosphate is Methyl 7-chloro-6,7,8-trideoxy-6- (1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside 2-(dihydrogen phosphate). The structural formula for clindamycin phosphate is represented below. Clindamycin phosphate. Molecular Formula: C18H34ClN2O8PS Molecular Weight: 504.97. Benzoyl peroxide is an antibacterial and keratolytic agent. The structural formula for benzoyl peroxide is represented below. Benzoyl peroxide. Molecular Formula: C14H10O4 Molecular Weight: 242.23. ONEXTON Gel contains the following inactive ingredients: carbomer 980, potassium hydroxide, propylene glycol, and purified water. Each gram of ONEXTON Gel contains 12 mg (1.2%) clindamycin phosphate, equivalent to 10 mg (1%) clindamycin, and 37.5 mg (3.75%) benzoyl peroxide.</Description>
</NDC>
<NDC>
<NDCCode>0378-8688-35</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0378-8688-35) * 5 g in 1 BOTTLE, PLASTIC * 20 g in 1 JAR</PackageDescription>
<NDC11Code>00378-8688-35</NDC11Code>
<ProductNDC>0378-8688</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clindamycin Phosphate And Benzoyl Peroxide</ProprietaryName>
<NonProprietaryName>Clindamycin Phosphate And Benzoyl Peroxide</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20140919</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065443</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2024-12-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140919</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clindamycin Phosphate and Benzoyl Peroxide Gel, 1%/5% is indicated for the topical treatment of acne vulgaris.</IndicationAndUsage>
<Description>Clindamycin Phosphate and Benzoyl Peroxide Gel, 1%/5% contains clindamycin phosphate, (7(S)-chloro-7-deoxylincomycin-2-phosphate). Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Chemically, clindamycin phosphate is (C18H34ClN2O8PS). The structural formula for clindamycin is represented below. Clindamycin phosphate has a molecular weight of 504.97 and its chemical name is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans- 4-propyl-L-2-pyrrolidinecarboxamido) - 1-thio-L- threo-alpha-D- galacto-octopyranoside 2-(dihydrogen phosphate). Clindamycin Phosphate and Benzoyl Peroxide Gel, 1%/5% also contains benzoyl peroxide, for topical use. Chemically, benzoyl peroxide is (C14H10O4). It has the following structural formula. Benzoyl peroxide has a molecular weight of 242.23. Each gram of Clindamycin Phosphate and Benzoyl Peroxide Gel, 1%/5% contains, as dispensed, 10 mg (1%) clindamycin as phosphate and 50 mg (5%) benzoyl peroxide in a base of carbomer, propylene glycol, potassium hydroxide, and purified water.</Description>
</NDC>
<NDC>
<NDCCode>0378-8688-54</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0378-8688-54) * 10 g in 1 BOTTLE, PLASTIC * 40 g in 1 JAR</PackageDescription>
<NDC11Code>00378-8688-54</NDC11Code>
<ProductNDC>0378-8688</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clindamycin Phosphate And Benzoyl Peroxide</ProprietaryName>
<NonProprietaryName>Clindamycin Phosphate And Benzoyl Peroxide</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20090825</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065443</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2024-12-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090825</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clindamycin Phosphate and Benzoyl Peroxide Gel, 1%/5% is indicated for the topical treatment of acne vulgaris.</IndicationAndUsage>
<Description>Clindamycin Phosphate and Benzoyl Peroxide Gel, 1%/5% contains clindamycin phosphate, (7(S)-chloro-7-deoxylincomycin-2-phosphate). Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Chemically, clindamycin phosphate is (C18H34ClN2O8PS). The structural formula for clindamycin is represented below. Clindamycin phosphate has a molecular weight of 504.97 and its chemical name is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans- 4-propyl-L-2-pyrrolidinecarboxamido) - 1-thio-L- threo-alpha-D- galacto-octopyranoside 2-(dihydrogen phosphate). Clindamycin Phosphate and Benzoyl Peroxide Gel, 1%/5% also contains benzoyl peroxide, for topical use. Chemically, benzoyl peroxide is (C14H10O4). It has the following structural formula. Benzoyl peroxide has a molecular weight of 242.23. Each gram of Clindamycin Phosphate and Benzoyl Peroxide Gel, 1%/5% contains, as dispensed, 10 mg (1%) clindamycin as phosphate and 50 mg (5%) benzoyl peroxide in a base of carbomer, propylene glycol, potassium hydroxide, and purified water.</Description>
</NDC>
<NDC>
<NDCCode>0591-3916-68</NDCCode>
<PackageDescription>1 BOTTLE, PUMP in 1 CARTON (0591-3916-68) / 50 g in 1 BOTTLE, PUMP</PackageDescription>
<NDC11Code>00591-3916-68</NDC11Code>
<ProductNDC>0591-3916</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clindamycin Phosphate And Benzoyl Peroxide</ProprietaryName>
<NonProprietaryName>Clindamycin Phosphate And Benzoyl Peroxide</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20190219</StartMarketingDate>
<EndMarketingDate>20260630</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205128</ApplicationNumber>
<LabelerName>Actavis Pharma, Inc.</LabelerName>
<SubstanceName>BENZOYL PEROXIDE; CLINDAMYCIN PHOSPHATE</SubstanceName>
<StrengthNumber>25; 10</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20190219</StartMarketingDatePackage>
<EndMarketingDatePackage>20260630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clindamycin phosphate and benzoyl peroxide gel is indicated for the topical treatment of acne vulgaris in patients 12 years or older.</IndicationAndUsage>
<Description>Clindamycin phosphate and benzoyl peroxide gel, 1.2%/2.5% is a combination product with two active ingredients in a white to off-white, opaque, smooth, aqueous gel formulation intended for topical use. Clindamycin phosphate, USP is a water-soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. The chemical name for clindamycin phosphate, USP is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galactooctopyranoside 2-(dihydrogen phosphate). The structural formula for clindamycin phosphate, USP is represented below:. Clindamycin phosphate, USP. C18H34ClN2O8PS M.W. 504.97. Benzoyl peroxide, USP is an antibacterial and keratolytic agent. The structural formula for benzoyl peroxide, USP is represented below:. Benzoyl peroxide, USP. C14H10O4 M.W. 242.23. Clindamycin phosphate and benzoyl peroxide gel contains the following inactive ingredients: purified water, carbomer 980, propylene glycol, and potassium hydroxide. Each gram of clindamycin phosphate and benzoyl peroxide gel contains 1.2% of clindamycin phosphate, USP which is equivalent to 1% clindamycin.</Description>
</NDC>
<NDC>
<NDCCode>0781-7161-19</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (0781-7161-19) > 45 g in 1 TUBE</PackageDescription>
<NDC11Code>00781-7161-19</NDC11Code>
<ProductNDC>0781-7161</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clindamycin Phosphate And Benzoyl Peroxide</ProprietaryName>
<NonProprietaryName>Clindamycin Phosphate And Benzoyl Peroxide</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20160825</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203688</ApplicationNumber>
<LabelerName>Sandoz Inc.</LabelerName>
<SubstanceName>BENZOYL PEROXIDE; CLINDAMYCIN PHOSPHATE</SubstanceName>
<StrengthNumber>50; 12</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160825</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clindamycin Phosphate and Benzoyl Peroxide Gel, 1.2% / 5% is a combination of clindamycin phosphate (a lincosamide antibacterial) and benzoyl peroxide indicated for the topical treatment of inflammatory acne vulgaris. (1.1). Limitation of Use:Clindamycin phosphate and benzoyl peroxide gel, 1.2% / 5% has not been demonstrated to have any additional benefit when compared with benzoyl peroxide alone in the same vehicle when used for the treatment of non-inflammatory acne. (1.2).</IndicationAndUsage>
<Description>Clindamycin Phosphate and Benzoyl Peroxide Gel, 1.2% / 5% is a fixed combination product with two active ingredients in a white to slightly yellow, opaque, aqueous gel formulation. Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Clindamycin phosphate is C18H34ClN2O8PS. The structural formula for clindamycin phosphate is represented below. Clindamycin phosphate has a molecular weight of 504.97 and its chemical name is methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside 2-(dihydrogen phosphate). Benzoyl peroxide is C14H10O4. It has the following structural formula. benzoyl peroxide. Benzoyl peroxide has a molecular weight of 242.23. Each gram of clindamycin phosphate and benzoyl peroxide gel, 1.2% / 5% contains 10 mg (1%) clindamycin, as clindamycin phosphate, and 50 mg (5%) benzoyl peroxide in a base consisting of carbopol 980, dimethicone, disodium lauryl sulfosuccinate, edetate disodium, glycerin, methylparaben, poloxamer 182, purified water, and sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>0781-7263-68</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0781-7263-68) * 5 g in 1 BOTTLE (0781-6514-39) * 20 g in 1 JAR (0781-7262-22) </PackageDescription>
<NDC11Code>00781-7263-68</NDC11Code>
<ProductNDC>0781-7263</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clindamycin And Benzoyl Peroxide</ProprietaryName>
<NonProprietaryName>Clindamycin And Benzoyl Peroxide</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20170815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204087</ApplicationNumber>
<LabelerName>Sandoz Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2024-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clindamycin and Benzoyl Peroxide Gel, 1%/5% is indicated for the topical treatment of acne vulgaris.</IndicationAndUsage>
<Description>For Dermatological Use Only - Not for Ophthalmic Use. *Reconstitute Before Dispensing*. Clindamycin and Benzoyl Peroxide Gel, 1%/5% contains clindamycin phosphate, (7(S)-chloro-7-deoxylincomycin-2-phosphate). Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Chemically, clindamycin phosphate is (C18H34ClN2O8PS). The structural formula for clindamycin is represented below. clindamycin phosphate. Clindamycin phosphate has molecular weight of 504.97 and its chemical name is Methyl 7-chloro-6,7, 8-trideoxy-6-(1-methyl-trans- 4-propyl-L-2-pyrrolidinecarboxamido) -1-thio-L- threo-alpha-D- galacto-octopyranoside 2-(dihydrogen phosphate). Clindamycin and benzoyl peroxide gel, 1%/5%also contains benzoyl peroxide, for topical use. Chemically, benzoyl peroxide is (C14H10O4). It has the following structural formula. Benzoyl Peroxide. Benzoyl peroxide has a molecular weight of 242.23. Each gram of clindamycin and benzoyl peroxide gel, 1%/5% contains, as dispensed, 10 mg (1%) clindamycin as phosphate and 50 mg (5%) benzoyl peroxide in a base of carbopol 980, d-limonene, docusate sodium solution, phosphoric acid, propylene glycol, purified water and sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>0781-7275-43</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0781-7275-43) * 7 g in 1 BOTTLE (0781-6525-17) * 20 g in 1 BOTTLE, PUMP (0781-7274-28) </PackageDescription>
<NDC11Code>00781-7275-43</NDC11Code>
<ProductNDC>0781-7275</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clindamycin And Benzoyl Peroxide</ProprietaryName>
<NonProprietaryName>Clindamycin And Benzoyl Peroxide</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204087</ApplicationNumber>
<LabelerName>Sandoz Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2024-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clindamycin and Benzoyl Peroxide Gel, 1%/5% is indicated for the topical treatment of acne vulgaris.</IndicationAndUsage>
<Description>For Dermatological Use Only - Not for Ophthalmic Use. *Reconstitute Before Dispensing*. Clindamycin and Benzoyl Peroxide Gel, 1%/5% contains clindamycin phosphate, (7(S)-chloro-7-deoxylincomycin-2-phosphate). Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Chemically, clindamycin phosphate is (C18H34ClN2O8PS). The structural formula for clindamycin is represented below. clindamycin phosphate. Clindamycin phosphate has molecular weight of 504.97 and its chemical name is Methyl 7-chloro-6,7, 8-trideoxy-6-(1-methyl-trans- 4-propyl-L-2-pyrrolidinecarboxamido) -1-thio-L- threo-alpha-D- galacto-octopyranoside 2-(dihydrogen phosphate). Clindamycin and benzoyl peroxide gel, 1%/5%also contains benzoyl peroxide, for topical use. Chemically, benzoyl peroxide is (C14H10O4). It has the following structural formula. Benzoyl Peroxide. Benzoyl peroxide has a molecular weight of 242.23. Each gram of clindamycin and benzoyl peroxide gel, 1%/5% contains, as dispensed, 10 mg (1%) clindamycin as phosphate and 50 mg (5%) benzoyl peroxide in a base of carbopol 980, d-limonene, docusate sodium solution, phosphoric acid, propylene glycol, purified water and sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>0781-7287-50</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0781-7287-50) * 10 g in 1 BOTTLE (0781-6536-21) * 40 g in 1 BOTTLE, PUMP (0781-7286-44) </PackageDescription>
<NDC11Code>00781-7287-50</NDC11Code>
<ProductNDC>0781-7287</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clindamycin And Benzoyl Peroxide</ProprietaryName>
<NonProprietaryName>Clindamycin And Benzoyl Peroxide</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204087</ApplicationNumber>
<LabelerName>Sandoz Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2024-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clindamycin and Benzoyl Peroxide Gel, 1%/5% is indicated for the topical treatment of acne vulgaris.</IndicationAndUsage>
<Description>For Dermatological Use Only - Not for Ophthalmic Use. *Reconstitute Before Dispensing*. Clindamycin and Benzoyl Peroxide Gel, 1%/5% contains clindamycin phosphate, (7(S)-chloro-7-deoxylincomycin-2-phosphate). Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Chemically, clindamycin phosphate is (C18H34ClN2O8PS). The structural formula for clindamycin is represented below. clindamycin phosphate. Clindamycin phosphate has molecular weight of 504.97 and its chemical name is Methyl 7-chloro-6,7, 8-trideoxy-6-(1-methyl-trans- 4-propyl-L-2-pyrrolidinecarboxamido) -1-thio-L- threo-alpha-D- galacto-octopyranoside 2-(dihydrogen phosphate). Clindamycin and benzoyl peroxide gel, 1%/5%also contains benzoyl peroxide, for topical use. Chemically, benzoyl peroxide is (C14H10O4). It has the following structural formula. Benzoyl Peroxide. Benzoyl peroxide has a molecular weight of 242.23. Each gram of clindamycin and benzoyl peroxide gel, 1%/5% contains, as dispensed, 10 mg (1%) clindamycin as phosphate and 50 mg (5%) benzoyl peroxide in a base of carbopol 980, d-limonene, docusate sodium solution, phosphoric acid, propylene glycol, purified water and sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>0781-7291-46</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0781-7291-46) * 10 g in 1 BOTTLE (0781-6536-21) * 40 g in 1 JAR (0781-7290-48) </PackageDescription>
<NDC11Code>00781-7291-46</NDC11Code>
<ProductNDC>0781-7291</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clindamycin And Benzoyl Peroxide</ProprietaryName>
<NonProprietaryName>Clindamycin And Benzoyl Peroxide</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204087</ApplicationNumber>
<LabelerName>Sandoz Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2024-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clindamycin and Benzoyl Peroxide Gel, 1%/5% is indicated for the topical treatment of acne vulgaris.</IndicationAndUsage>
<Description>For Dermatological Use Only - Not for Ophthalmic Use. *Reconstitute Before Dispensing*. Clindamycin and Benzoyl Peroxide Gel, 1%/5% contains clindamycin phosphate, (7(S)-chloro-7-deoxylincomycin-2-phosphate). Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Chemically, clindamycin phosphate is (C18H34ClN2O8PS). The structural formula for clindamycin is represented below. clindamycin phosphate. Clindamycin phosphate has molecular weight of 504.97 and its chemical name is Methyl 7-chloro-6,7, 8-trideoxy-6-(1-methyl-trans- 4-propyl-L-2-pyrrolidinecarboxamido) -1-thio-L- threo-alpha-D- galacto-octopyranoside 2-(dihydrogen phosphate). Clindamycin and benzoyl peroxide gel, 1%/5%also contains benzoyl peroxide, for topical use. Chemically, benzoyl peroxide is (C14H10O4). It has the following structural formula. Benzoyl Peroxide. Benzoyl peroxide has a molecular weight of 242.23. Each gram of clindamycin and benzoyl peroxide gel, 1%/5% contains, as dispensed, 10 mg (1%) clindamycin as phosphate and 50 mg (5%) benzoyl peroxide in a base of carbopol 980, d-limonene, docusate sodium solution, phosphoric acid, propylene glycol, purified water and sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>21922-022-06</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (21922-022-06) / 45 g in 1 TUBE</PackageDescription>
<NDC11Code>21922-0022-06</NDC11Code>
<ProductNDC>21922-022</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clindamycin Phosphate And Benzoyl Peroxide</ProprietaryName>
<ProprietaryNameSuffix>Clindamycin Phosphate And Benzoyl Peroxide</ProprietaryNameSuffix>
<NonProprietaryName>Clindamycin Phosphate And Benzoyl Peroxide</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20210520</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212433</ApplicationNumber>
<LabelerName>Encube Ethicals, Inc.</LabelerName>
<SubstanceName>CLINDAMYCIN PHOSPHATE; BENZOYL PEROXIDE</SubstanceName>
<StrengthNumber>10; 50</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clindamycin Phosphate and Benzoyl Peroxide Gel, 1.2%/5% is a combination of clindamycin phosphate (a lincosamide antibacterial) and benzoyl peroxide indicated for the topical treatment of inflammatory acne vulgaris. (1.1). Limitation of Use. Clindamycin Phosphate and Benzoyl Peroxide Gel, 1.2%/5% has not been demonstrated to have any additional benefit when compared with benzoyl peroxide alone in the same vehicle when used for the treatment of non-inflammatory acne. (1.2).</IndicationAndUsage>
<Description>Clindamycin Phosphate and Benzoyl Peroxide Gel, 1.2%/5% is a fixed combination product with two active ingredients in a white to slightly yellow, opaque, aqueous gel formulation. Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Clindamycin phosphate is C18H34ClN2O8PS. The structural formula for clindamycin phosphate is represented below. Clindamycin phosphate has a molecular weight of 504.97 and its chemical name is methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L- threo-α-D-galacto-octopyranoside 2-(dihydrogen phosphate). Benzoyl peroxide is C14H14O4. It has the following structural formula. Benzoyl Peroxide has a molecular weight of 242.23. Each gram of Clindamycin Phosphate and Benzoyl Peroxide Gel, 1.2%/5% contains 10 mg (1%) clindamycin, as clindamycin phosphate, and 50 mg (5%) benzoyl peroxide in a base consisting of carbomer homopolymer (type C), dimethicone, edetate disodium, glycerin, poloxamer 182, purified water, silicon dioxide, and sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>21922-068-43</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (21922-068-43) * 20 g in 1 JAR (21922-067-62) * 40 g in 1 JAR (21922-067-41) * 28 g in 1 BOTTLE, PUMP (21922-067-39) * 40 g in 1 BOTTLE, PUMP (21922-067-42) * 10 g in 1 BOTTLE (21922-066-12) * 7 g in 1 BOTTLE (21922-066-37) * 5 g in 1 BOTTLE (21922-066-36) </PackageDescription>
<NDC11Code>21922-0068-43</NDC11Code>
<ProductNDC>21922-068</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clindamycin And Benzoyl Peroxide</ProprietaryName>
<NonProprietaryName>Clindamycin And Benzoyl Peroxide</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20251007</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204087</ApplicationNumber>
<LabelerName>Encube Ethicals, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-10-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251007</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clindamycin and Benzoyl Peroxide Gel, 1%/5% is indicated for the topical treatment of acne vulgaris.</IndicationAndUsage>
<Description>Clindamycin and Benzoyl Peroxide Gel, 1%/5% contains clindamycin phosphate, (7(S)-chloro-7-deoxylincomycin-2-phosphate). Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Chemically, clindamycin phosphate is (C18H34ClN2O8PS). The structural formula for clindamycin is represented below. Clindamycin phosphate has molecular weight of 504.97 and its chemical name is Methyl 7-chloro-6,7, 8-trideoxy-6-(1-methyl-trans- 4-propyl-L-2-pyrrolidinecarboxamido) -1-thio-L- threo-alpha-D- galacto-octopyranoside 2-(dihydrogen phosphate). Clindamycin and benzoyl peroxide gel, 1%/5%also contains benzoyl peroxide, for topical use.Chemically, benzoyl peroxide is (C14H10O4). It has the following structural formula. Benzoyl peroxide has a molecular weight of 242.23. Each gram of clindamycin and benzoyl peroxide gel, 1%/5% contains, as dispensed, 10 mg (1%) clindamycin as phosphate and 50 mg (5%) benzoyl peroxide in a base of carbopol 980, d-limonene, docusate sodium solution, phosphoric acid, propylene glycol, purified water and sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>21922-068-44</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (21922-068-44) * 20 g in 1 JAR (21922-067-62) * 40 g in 1 JAR (21922-067-41) * 28 g in 1 BOTTLE, PUMP (21922-067-39) * 40 g in 1 BOTTLE, PUMP (21922-067-42) * 10 g in 1 BOTTLE (21922-066-12) * 7 g in 1 BOTTLE (21922-066-37) * 5 g in 1 BOTTLE (21922-066-36) </PackageDescription>
<NDC11Code>21922-0068-44</NDC11Code>
<ProductNDC>21922-068</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clindamycin And Benzoyl Peroxide</ProprietaryName>
<NonProprietaryName>Clindamycin And Benzoyl Peroxide</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20251007</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204087</ApplicationNumber>
<LabelerName>Encube Ethicals, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-10-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251007</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clindamycin and Benzoyl Peroxide Gel, 1%/5% is indicated for the topical treatment of acne vulgaris.</IndicationAndUsage>
<Description>Clindamycin and Benzoyl Peroxide Gel, 1%/5% contains clindamycin phosphate, (7(S)-chloro-7-deoxylincomycin-2-phosphate). Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Chemically, clindamycin phosphate is (C18H34ClN2O8PS). The structural formula for clindamycin is represented below. Clindamycin phosphate has molecular weight of 504.97 and its chemical name is Methyl 7-chloro-6,7, 8-trideoxy-6-(1-methyl-trans- 4-propyl-L-2-pyrrolidinecarboxamido) -1-thio-L- threo-alpha-D- galacto-octopyranoside 2-(dihydrogen phosphate). Clindamycin and benzoyl peroxide gel, 1%/5%also contains benzoyl peroxide, for topical use.Chemically, benzoyl peroxide is (C14H10O4). It has the following structural formula. Benzoyl peroxide has a molecular weight of 242.23. Each gram of clindamycin and benzoyl peroxide gel, 1%/5% contains, as dispensed, 10 mg (1%) clindamycin as phosphate and 50 mg (5%) benzoyl peroxide in a base of carbopol 980, d-limonene, docusate sodium solution, phosphoric acid, propylene glycol, purified water and sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>21922-068-45</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (21922-068-45) * 20 g in 1 JAR (21922-067-62) * 40 g in 1 JAR (21922-067-41) * 28 g in 1 BOTTLE, PUMP (21922-067-39) * 40 g in 1 BOTTLE, PUMP (21922-067-42) * 10 g in 1 BOTTLE (21922-066-12) * 7 g in 1 BOTTLE (21922-066-37) * 5 g in 1 BOTTLE (21922-066-36) </PackageDescription>
<NDC11Code>21922-0068-45</NDC11Code>
<ProductNDC>21922-068</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clindamycin And Benzoyl Peroxide</ProprietaryName>
<NonProprietaryName>Clindamycin And Benzoyl Peroxide</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20251007</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204087</ApplicationNumber>
<LabelerName>Encube Ethicals, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-10-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251007</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clindamycin and Benzoyl Peroxide Gel, 1%/5% is indicated for the topical treatment of acne vulgaris.</IndicationAndUsage>
<Description>Clindamycin and Benzoyl Peroxide Gel, 1%/5% contains clindamycin phosphate, (7(S)-chloro-7-deoxylincomycin-2-phosphate). Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Chemically, clindamycin phosphate is (C18H34ClN2O8PS). The structural formula for clindamycin is represented below. Clindamycin phosphate has molecular weight of 504.97 and its chemical name is Methyl 7-chloro-6,7, 8-trideoxy-6-(1-methyl-trans- 4-propyl-L-2-pyrrolidinecarboxamido) -1-thio-L- threo-alpha-D- galacto-octopyranoside 2-(dihydrogen phosphate). Clindamycin and benzoyl peroxide gel, 1%/5%also contains benzoyl peroxide, for topical use.Chemically, benzoyl peroxide is (C14H10O4). It has the following structural formula. Benzoyl peroxide has a molecular weight of 242.23. Each gram of clindamycin and benzoyl peroxide gel, 1%/5% contains, as dispensed, 10 mg (1%) clindamycin as phosphate and 50 mg (5%) benzoyl peroxide in a base of carbopol 980, d-limonene, docusate sodium solution, phosphoric acid, propylene glycol, purified water and sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>21922-068-46</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (21922-068-46) * 20 g in 1 JAR (21922-067-62) * 40 g in 1 JAR (21922-067-41) * 28 g in 1 BOTTLE, PUMP (21922-067-39) * 40 g in 1 BOTTLE, PUMP (21922-067-42) * 10 g in 1 BOTTLE (21922-066-12) * 7 g in 1 BOTTLE (21922-066-37) * 5 g in 1 BOTTLE (21922-066-36) </PackageDescription>
<NDC11Code>21922-0068-46</NDC11Code>
<ProductNDC>21922-068</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clindamycin And Benzoyl Peroxide</ProprietaryName>
<NonProprietaryName>Clindamycin And Benzoyl Peroxide</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20251007</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204087</ApplicationNumber>
<LabelerName>Encube Ethicals, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-10-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251007</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clindamycin and Benzoyl Peroxide Gel, 1%/5% is indicated for the topical treatment of acne vulgaris.</IndicationAndUsage>
<Description>Clindamycin and Benzoyl Peroxide Gel, 1%/5% contains clindamycin phosphate, (7(S)-chloro-7-deoxylincomycin-2-phosphate). Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Chemically, clindamycin phosphate is (C18H34ClN2O8PS). The structural formula for clindamycin is represented below. Clindamycin phosphate has molecular weight of 504.97 and its chemical name is Methyl 7-chloro-6,7, 8-trideoxy-6-(1-methyl-trans- 4-propyl-L-2-pyrrolidinecarboxamido) -1-thio-L- threo-alpha-D- galacto-octopyranoside 2-(dihydrogen phosphate). Clindamycin and benzoyl peroxide gel, 1%/5%also contains benzoyl peroxide, for topical use.Chemically, benzoyl peroxide is (C14H10O4). It has the following structural formula. Benzoyl peroxide has a molecular weight of 242.23. Each gram of clindamycin and benzoyl peroxide gel, 1%/5% contains, as dispensed, 10 mg (1%) clindamycin as phosphate and 50 mg (5%) benzoyl peroxide in a base of carbopol 980, d-limonene, docusate sodium solution, phosphoric acid, propylene glycol, purified water and sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>21922-074-40</NDCCode>
<PackageDescription>1 BOTTLE, PUMP in 1 CARTON (21922-074-40) / 50 g in 1 BOTTLE, PUMP</PackageDescription>
<NDC11Code>21922-0074-40</NDC11Code>
<ProductNDC>21922-074</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clindamycin Phosphate And Benzoyl Peroxide</ProprietaryName>
<NonProprietaryName>Clindamycin Phosphate And Benzoyl Peroxide</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20241201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207194</ApplicationNumber>
<LabelerName>Encube Ethicals, Inc.</LabelerName>
<SubstanceName>CLINDAMYCIN PHOSPHATE; BENZOYL PEROXIDE</SubstanceName>
<StrengthNumber>10; 25</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clindamycin phosphate and benzoyl peroxide gel is indicated for the topical treatment of acne vulgaris in patients 12 years or older.</IndicationAndUsage>
<Description>Clindamycin phosphate and benzoyl peroxide gel, 1.2% / 2.5% is a combination product with two active ingredients in a white to off-white, opaque, smooth, aqueous gel formulation intended for topical use. Clindamycin phosphate is a water-soluble ester of the semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin.The chemical name for clindamycin phosphate is Methyl 7 chloro-6,7,8-trideoxy- 6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo α-D-galacto octopyranoside 2-(dihydrogen phosphate). The structural formula for clindamycin phosphate is represented below:Clindamycin phosphate. Molecular Formula: C18H34CIN2O8PS Molecular Weight: 504.97. Benzoyl peroxide is an antibacterial and keratolytic agent. The structural formula for benzoyl peroxide is represented below:Benzoyl peroxide. Molecular Formula: C14H10O4 Molecular Weight: 242.23. Clindamycin phosphate and benzoyl peroxide gel contains the following inactive ingredients: carbopol 980, poloxamer 182, polysorbate 80, propylene glycol, purified water and sodium hydroxide. Each gram of clindamycin phosphate and benzoyl peroxide gel contains 1.2% of clindamycin phosphate which is equivalent to 1% clindamycin.</Description>
</NDC>
<NDC>
<NDCCode>43538-176-45</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (43538-176-45) / 45 g in 1 TUBE</PackageDescription>
<NDC11Code>43538-0176-45</NDC11Code>
<ProductNDC>43538-176</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Neuac</ProprietaryName>
<NonProprietaryName>Clindamycin Phosphate And Benzoyl Peroxide</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140615</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090979</ApplicationNumber>
<LabelerName>Medimetriks Pharmaceuticals</LabelerName>
<SubstanceName>CLINDAMYCIN PHOSPHATE; BENZOYL PEROXIDE</SubstanceName>
<StrengthNumber>10; 50</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-12-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Neuac® (clindamycin phosphate and benzoyl peroxide) Gel, 1.2%/5% is a combination of clindamycin phosphate (a lincosamide antibacterial) and benzoyl peroxide indicated for the topical treatment of inflammatory acne vulgaris. (1.1). Limitation of Use. Neuac® (clindamycin phosphate and benzoyl peroxide) Gel, 1.2%/5% has not been demonstrated to have any additional benefit when compared with benzoyl peroxide alone in the same vehicle when used for the treatment of non-inflammatory acne. (1.2).</IndicationAndUsage>
<Description>Neuac® (clindamycin phosphate and benzoyl peroxide) Gel, 1.2%/5% is a fixed combination product with two active ingredients in a white, opaque, aqueous gel formulation. Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Clindamycin phosphate is C18H34ClN2O8PS. The structural formula for clindamycin phosphate is represented below. Clindamycin phosphate has a molecular weight of 504.97 and its chemical name is methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside 2-(dihydrogen phosphate). Benzoyl peroxide is C14H10O4. It has the following structural formula. Benzoyl peroxide has a molecular weight of 242.23. Each gram of Neuac® (clindamycin phosphate and benzoyl peroxide) Gel, 1.2%/5% contains 10 mg (1%) clindamycin, as clindamycin phosphate, and 50 mg (5%) benzoyl peroxide in a base consisting of carbomer homopolymer (type B), hydrochloric acid, methylparaben, dimethicone, propylparaben, purified water and sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>45802-383-01</NDCCode>
<PackageDescription>50 g in 1 BOTTLE, PUMP (45802-383-01) </PackageDescription>
<NDC11Code>45802-0383-01</NDC11Code>
<ProductNDC>45802-383</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clindamycin Phosphate And Benzoyl Peroxide</ProprietaryName>
<NonProprietaryName>Clindamycin Phosphate And Benzoyl Peroxide</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20240920</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209610</ApplicationNumber>
<LabelerName>Padagis Israel Pharmaceuticals Ltd</LabelerName>
<SubstanceName>CLINDAMYCIN PHOSPHATE; BENZOYL PEROXIDE</SubstanceName>
<StrengthNumber>10; 37.5</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240920</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clindamycin phosphate and benzoyl peroxide gel is indicated for the topical treatment of acne vulgaris in patients 12 years of age and older.</IndicationAndUsage>
<Description>Clindamycin Phosphate and Benzoyl Peroxide Gel, 1.2%/3.75% is a combination product with two active ingredients in a white to off-white, opaque, smooth, aqueous gel formulation intended for topical use. Clindamycin phosphate is a water-soluble ester of the semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. The chemical name for clindamycin phosphate is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L-threo-α-D-galacto-octopyranoside 2-(dihydrogen phosphate). The structural formula for clindamycin phosphate is represented below. Clindamycin phosphate. Molecular Formula: C18H34ClN2O8PS. Molecular Weight: 504.97. Benzoyl peroxide is an antibacterial and keratolytic agent. The structural formula for benzoyl peroxide is represented below. Benzoyl peroxide. Molecular Formula: C14H10O4. Molecular Weight: 242.23. Clindamycin phosphate and benzoyl peroxide gel contains the following inactive ingredients: carbomer 980, potassium hydroxide, propylene glycol, and purified water. Each gram of clindamycin phosphate and benzoyl peroxide gel contains 12 mg (1.2%) clindamycin phosphate, equivalent to 10 mg (1%) clindamycin, and 37.5 mg (3.75%) benzoyl peroxide.</Description>
</NDC>
<NDC>
<NDCCode>45802-507-02</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (45802-507-02) * .6 g in 1 VIAL * 39.4 g in 1 JAR</PackageDescription>
<NDC11Code>45802-0507-02</NDC11Code>
<ProductNDC>45802-507</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clindamycin And Benzoyl Peroxide</ProprietaryName>
<NonProprietaryName>Clindamycin And Benzoyl Peroxide</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20150922</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202440</ApplicationNumber>
<LabelerName>Padagis Israel Pharmaceuticals Ltd</LabelerName>
<Status>Active</Status>
<LastUpdate>2023-10-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150922</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clindamycin and benzoyl peroxide topical gel, 1%/5% is indicated for the topical treatment of acne vulgaris.</IndicationAndUsage>
<Description>Clindamycin and benzoyl peroxide topical gel, 1%/5% contains clindamycin phosphate, (7(S)-chloro-7-deoxylincomycin-2-phosphate). Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Chemically, clindamycin phosphate is (C18H34ClN2O8PS). The structural formula for clindamycin is represented below. Clindamycin phosphate has a molecular weight of 504.97 and its chemical name is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido) - 1-thio-L- threo-alpha-D-galacto-octopyranoside 2-(dihydrogen phosphate). Clindamycin and benzoyl peroxide topical gel, 1%/5% also contains benzoyl peroxide, for topical use. Chemically, benzoyl peroxide is (C14H10O4). It has the following structural formula. Benzoyl peroxide has a molecular weight of 242.23. Each gram of clindamycin and benzoyl peroxide topical gel, 1%/5% contains, as dispensed, 10 mg (1%) clindamycin as phosphate and 50 mg (5%) benzoyl peroxide in a base of carbomer homopolymer type C, sodium hydroxide, dioctyl sodium sulfosuccinate, and purified water.</Description>
</NDC>
<NDC>
<NDCCode>45802-507-04</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (45802-507-04) * .6 g in 1 VIAL * 39.4 g in 1 BOTTLE, PUMP</PackageDescription>
<NDC11Code>45802-0507-04</NDC11Code>
<ProductNDC>45802-507</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clindamycin And Benzoyl Peroxide</ProprietaryName>
<NonProprietaryName>Clindamycin And Benzoyl Peroxide</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20160426</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202440</ApplicationNumber>
<LabelerName>Padagis Israel Pharmaceuticals Ltd</LabelerName>
<Status>Active</Status>
<LastUpdate>2023-10-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160426</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clindamycin and benzoyl peroxide topical gel, 1%/5% is indicated for the topical treatment of acne vulgaris.</IndicationAndUsage>
<Description>Clindamycin and benzoyl peroxide topical gel, 1%/5% contains clindamycin phosphate, (7(S)-chloro-7-deoxylincomycin-2-phosphate). Clindamycin phosphate is a water soluble ester of the semi-synthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent antibiotic lincomycin. Chemically, clindamycin phosphate is (C18H34ClN2O8PS). The structural formula for clindamycin is represented below. Clindamycin phosphate has a molecular weight of 504.97 and its chemical name is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl-trans-4-propyl-L-2-pyrrolidinecarboxamido) - 1-thio-L- threo-alpha-D-galacto-octopyranoside 2-(dihydrogen phosphate). Clindamycin and benzoyl peroxide topical gel, 1%/5% also contains benzoyl peroxide, for topical use. Chemically, benzoyl peroxide is (C14H10O4). It has the following structural formula. Benzoyl peroxide has a molecular weight of 242.23. Each gram of clindamycin and benzoyl peroxide topical gel, 1%/5% contains, as dispensed, 10 mg (1%) clindamycin as phosphate and 50 mg (5%) benzoyl peroxide in a base of carbomer homopolymer type C, sodium hydroxide, dioctyl sodium sulfosuccinate, and purified water.</Description>
</NDC>
</NDCList>