{
"NDC": [
{
"NDCCode": "75907-090-55",
"PackageDescription": "5 BLISTER PACK in 1 CARTON (75907-090-55) / 1 KIT in 1 BLISTER PACK (75907-090-28) ",
"NDC11Code": "75907-0090-55",
"ProductNDC": "75907-090",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levora",
"NonProprietaryName": "Levonorgestrel And Ethinyl Estradiol",
"DosageFormName": "KIT",
"StartMarketingDate": "20240930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA073594",
"LabelerName": "Dr. Reddy's Laboratories Inc.",
"Status": "Deprecated",
"LastUpdate": "2025-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240930",
"SamplePackage": "N",
"IndicationAndUsage": "LEVORA 0.15/30-28 is indicated for use by females of reproductive potential to prevent pregnancy.",
"Description": "LEVORA ®0.15/30-28 (levonorgestrel and ethinyl estradiol tablets) is a combination oral contraceptive (COC) consisting of 21 white active tablets, each containing 0.15 mg of levonorgestrel, a synthetic progestin and 0.03 mg of ethinyl estradiol, an estrogen, and 7 peach inert tablets (without hormones). The structural formulas for the active components are. Levonorgestrel is chemically 18,19-Dinorpregn-4-en-20-yn-3-one, 13-ethyl-17-hydroxy-,(17α) (-)-. Ethinyl Estradiol is 19-nor-17α-pregna-1,3,5(10)-trien-20-yne-3, 17-diol. Each white active tablet contains the following inactive ingredients: croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and povidone. Each peach inert tablet contains the following inactive ingredients: FD&C Yellow No. 6 Lake, Lactose Anhydrous, Lactose Monohydrate, Magnesium Stearate and Microcrystalline Cellulose."
},
{
"NDCCode": "75907-078-55",
"PackageDescription": "5 BLISTER PACK in 1 CARTON (75907-078-55) / 1 KIT in 1 BLISTER PACK (75907-078-28) ",
"NDC11Code": "75907-0078-55",
"ProductNDC": "75907-078",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Low-ogestrel",
"NonProprietaryName": "Norgestrel And Ethinyl Estradiol",
"DosageFormName": "KIT",
"StartMarketingDate": "20240930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075288",
"LabelerName": "Dr. Reddy's Laboratories Inc.",
"Status": "Deprecated",
"LastUpdate": "2025-07-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240930",
"SamplePackage": "N",
"IndicationAndUsage": "Low-Ogestrel is indicated for use by females of reproductive potential to prevent pregnancy. In a study of 1,287 women with a total of 11,085 cycles or 852.7 women-years of usage, the pregnancy rate in women age 15-40 years was approximately 1 pregnancy per 100 women-years of use.",
"Description": "Low-Ogestrel is a combination oral contraceptive containing the progestational compound norgestrel and the estrogenic compound ethinyl estradiol. Norgestrel is designated as (2) (±)-13 Ethyl-17-hydroxy-18,19-dinor-17α-pregn-4-en-20-yn-3-one and ethinyl estradiol is designated as (19-nor-17α-pregna-1,3,5 (10)-trien-20-yne-3,17-diol). Each white active Low-Ogestrel tablet contains 0.3 mg norgestrel and 0.03 mg ethinyl estradiol and the following inert ingredients: croscarmellose sodium, lactose, magnesium stearate, microcrystalline cellulose, and povidone. Each peach placebo tablet contains only the following inert ingredients: anhydrous lactose, FD&C Yellow No. 6 Lake, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. Each pill pack contains 21 white active tablets and 7 peach inert tablets."
},
{
"NDCCode": "75907-079-55",
"PackageDescription": "5 BLISTER PACK in 1 CARTON (75907-079-55) / 1 KIT in 1 BLISTER PACK (75907-079-28) ",
"NDC11Code": "75907-0079-55",
"ProductNDC": "75907-079",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lutera",
"NonProprietaryName": "Levonorgestrel And Ethinyl Estradiol",
"DosageFormName": "KIT",
"StartMarketingDate": "20240930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076625",
"LabelerName": "Dr. Reddy's Laboratories Inc.",
"Status": "Deprecated",
"LastUpdate": "2025-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240930",
"SamplePackage": "N",
"IndicationAndUsage": "Lutera is indicated for the prevention of pregnancy in women who elect to use oral contraceptives as a method of contraception. Oral contraceptives are highly effective. Table II lists the typical accidental pregnancy rates for users of combination oral contraceptives and other methods of contraception. The efficacy of these contraceptive methods, except sterilization, the IUD, and Norplant ®System, depends upon the reliability with which they are used. Correct and consistent use of methods can result in lower failure rates. In a clinical trial with levonorgestrel and ethinyl estradiol tablets, 1,477 subjects had 7,720 cycles of use and a total of 5 pregnancies were reported. This represents an overall pregnancy rate of 0.84 per 100 woman-years. This rate includes patients who did not take the drug correctly. One or more pills were missed during 1,479 (18.8%) of the 7,870 cycles; thus all tablets were taken during 6,391 (81.2%) of the 7,870 cycles. Of the total 7,870 cycles, a total of 150 cycles were excluded from the calculation of the Pearl index due to the use of backup contraception and/or missing 3 or more consecutive pills.",
"Description": "Each active, white tablet (21) contains 0.1 mg of levonorgestrel, d (-)-13β-ethyl-17α-ethinyl-17β- hydroxygon-4-en-3-one, a totally synthetic progestogen, and 0.02 mg of ethinyl estradiol, 17α-ethinyl- 1,3,5(10)-estratriene-3,17β-diol. The inactive ingredients present are croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and povidone. Each inactive, peach tablet (7) contains the following inactive ingredients: FD&C Yellow #6, lactose anhydrous, lactose monohydrate, magnesium stearate, and microcrystalline cellulose."
},
{
"NDCCode": "75907-089-55",
"PackageDescription": "5 BLISTER PACK in 1 CARTON (75907-089-55) / 1 KIT in 1 BLISTER PACK (75907-089-28) ",
"NDC11Code": "75907-0089-55",
"ProductNDC": "75907-089",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sronyx",
"NonProprietaryName": "Levonorgestrel And Ethinyl Estradiol",
"DosageFormName": "KIT",
"StartMarketingDate": "20240930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077681",
"LabelerName": "Dr. Reddy's Labratories Inc.",
"Status": "Deprecated",
"LastUpdate": "2025-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240930",
"SamplePackage": "N",
"IndicationAndUsage": "Oral contraceptives are indicated for the prevention of pregnancy in women who elect to use this product as a method of contraception. Oral contraceptives are highly effective. Table III lists the typical accidental pregnancy rates for users of combination oral contraceptives and other methods of contraception. The efficacy of these contraceptive methods, except sterilization, depends upon the reliability with which they are used. Correct and consistent use of methods can result in lower failure rates.",
"Description": "Each cycle of Sronyx ®(Levonorgestrel and Ethinyl Estradiol Tablets USP) consists of 21 white active tablets each containing 0.1 mg levonorgestrel and 0.02 mg ethinyl estradiol; and seven peach tablets – inert. The inactive ingredients are Croscarmellose Sodium NF, Lactose Monohydrate NF, Magnesium Stearate NF, Microcrystalline Cellulose (PH 102) NF, and Povidone (K29/32) NF. Each inactive, placebo tablet contains the following inactive ingredients: FD & C Yellow #6 Lake 35-42%, Lactose Anhydrous (DT Micro) NF, Lactose Monohydrate (200M) NF, Magnesium Stearate NF and Microcrystalline Cellulose NF. Levonorgestrel has a molecular weight of 312.4 and a molecular formula of C 21H 28O 2. Ethinyl estradiol has a molecular weight of 296.4 and a molecular formula of C 20H 24O 2. The structural formulas are as follows:."
},
{
"NDCCode": "75907-260-55",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (75907-260-55) ",
"NDC11Code": "75907-0260-55",
"ProductNDC": "75907-260",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Acetaminophen Ibuprofen (nsaid)",
"NonProprietaryName": "Acetaminophen And Ibuprofen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250219",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218247",
"LabelerName": "Dr. Reddy's Labortories Inc",
"SubstanceName": "ACETAMINOPHEN; IBUPROFEN",
"StrengthNumber": "250; 125",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-07-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250219",
"SamplePackage": "N",
"IndicationAndUsage": "Uses: 1 temporarily relieves minor aches and pains due to:backachemuscular achesminor pain of arthritisheadachetoothachemenstrual cramps."
},
{
"NDCCode": "43744-090-55",
"PackageDescription": "500 g in 1 DRUM (43744-090-55)",
"NDC11Code": "43744-0090-55",
"ProductNDC": "43744-090",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Bimatoprost",
"DosageFormName": "POWDER",
"StartMarketingDate": "20120707",
"EndMarketingDate": "20130624",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "CBSCHEM LIMITED",
"SubstanceName": "BIMATOPROST",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20130624"
},
{
"NDCCode": "51346-090-01",
"PackageDescription": "55 mL in 1 CARTON (51346-090-01)",
"NDC11Code": "51346-0090-01",
"ProductNDC": "51346-090",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Solie",
"NonProprietaryName": "Dimethicone",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20110601",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part347",
"LabelerName": "NATURE REPUBLIC CO., LTD.",
"SubstanceName": "DIMETHICONE",
"StrengthNumber": ".77",
"StrengthUnit": "g/55mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "52828-090-55",
"PackageDescription": "208 L in 1 CONTAINER (52828-090-55)",
"NDC11Code": "52828-0090-55",
"ProductNDC": "52828-090",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Mineral Oil",
"DosageFormName": "LIQUID",
"StartMarketingDate": "20101119",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Lub-Line Corp",
"SubstanceName": "MINERAL OIL",
"StrengthNumber": "100",
"StrengthUnit": "L/100L",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "59115-090-55",
"PackageDescription": "500 TABLET in 1 BOTTLE (59115-090-55) ",
"NDC11Code": "59115-0090-55",
"ProductNDC": "59115-090",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Risperidone",
"NonProprietaryName": "Risperidone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20090601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078740",
"LabelerName": "Hikma Pharmaceutical",
"SubstanceName": "RISPERIDONE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-12-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20090601",
"SamplePackage": "N"
},
{
"NDCCode": "75907-044-01",
"PackageDescription": "100 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (75907-044-01) ",
"NDC11Code": "75907-0044-01",
"ProductNDC": "75907-044",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diltiazem Hydrochloride Extended-release",
"NonProprietaryName": "Diltiazem Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20240910",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215775",
"LabelerName": "Dr. Reddy's Labratories Inc.",
"SubstanceName": "DILTIAZEM HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-09-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240910",
"SamplePackage": "N",
"IndicationAndUsage": "Diltiazem Hydrochloride Extended-Release Capsules (Twice-a-Day Dosage) are indicated for the treatment of hypertension. They may be used alone or in combination with other antihypertensive medications, such as diuretics.",
"Description": "Diltiazem hydrochloride is a calcium ion cellular influx inhibitor (slow channel blocker or calcium antagonist). Chemically, diltiazem hydrochloride is 1,5-Benzothiazepin-4(5H)-one, 3-(acetyloxy)-5-[2-(dimethylamino) ethyl]-2, 3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride, (+)-cis-. The chemical structure is. Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. It has a molecular weight of 450.98. Each Diltiazem Hydrochloride Extended-Release Capsule, USP contains either 60 mg diltiazem hydrochloride (equivalent to 55.1 mg diltiazem), 90 mg diltiazem hydrochloride (equivalent to 82.7 mg diltiazem), or 120 mg diltiazem hydrochloride (equivalent to 110.3 mg diltiazem). Also contains: sucrose, povidone, hypromellose, methacrylic acid copolymer, diethyl phthalate, FD&C Red No. 40, titanium dioxide, gelatin, black ink. The 90 mg also contains FD&C Red No. 3. For oral administration. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "75907-045-01",
"PackageDescription": "100 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (75907-045-01) ",
"NDC11Code": "75907-0045-01",
"ProductNDC": "75907-045",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diltiazem Hydrochloride Extended-release",
"NonProprietaryName": "Diltiazem Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20240910",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215775",
"LabelerName": "Dr. Reddy's Labratories Inc.",
"SubstanceName": "DILTIAZEM HYDROCHLORIDE",
"StrengthNumber": "90",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-09-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240910",
"SamplePackage": "N",
"IndicationAndUsage": "Diltiazem Hydrochloride Extended-Release Capsules (Twice-a-Day Dosage) are indicated for the treatment of hypertension. They may be used alone or in combination with other antihypertensive medications, such as diuretics.",
"Description": "Diltiazem hydrochloride is a calcium ion cellular influx inhibitor (slow channel blocker or calcium antagonist). Chemically, diltiazem hydrochloride is 1,5-Benzothiazepin-4(5H)-one, 3-(acetyloxy)-5-[2-(dimethylamino) ethyl]-2, 3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride, (+)-cis-. The chemical structure is. Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. It has a molecular weight of 450.98. Each Diltiazem Hydrochloride Extended-Release Capsule, USP contains either 60 mg diltiazem hydrochloride (equivalent to 55.1 mg diltiazem), 90 mg diltiazem hydrochloride (equivalent to 82.7 mg diltiazem), or 120 mg diltiazem hydrochloride (equivalent to 110.3 mg diltiazem). Also contains: sucrose, povidone, hypromellose, methacrylic acid copolymer, diethyl phthalate, FD&C Red No. 40, titanium dioxide, gelatin, black ink. The 90 mg also contains FD&C Red No. 3. For oral administration. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "75907-046-01",
"PackageDescription": "100 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (75907-046-01) ",
"NDC11Code": "75907-0046-01",
"ProductNDC": "75907-046",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diltiazem Hydrochloride Extended-release",
"NonProprietaryName": "Diltiazem Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20240910",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215775",
"LabelerName": "Dr. Reddy's Labratories Inc.",
"SubstanceName": "DILTIAZEM HYDROCHLORIDE",
"StrengthNumber": "120",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-09-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240910",
"SamplePackage": "N",
"IndicationAndUsage": "Diltiazem Hydrochloride Extended-Release Capsules (Twice-a-Day Dosage) are indicated for the treatment of hypertension. They may be used alone or in combination with other antihypertensive medications, such as diuretics.",
"Description": "Diltiazem hydrochloride is a calcium ion cellular influx inhibitor (slow channel blocker or calcium antagonist). Chemically, diltiazem hydrochloride is 1,5-Benzothiazepin-4(5H)-one, 3-(acetyloxy)-5-[2-(dimethylamino) ethyl]-2, 3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride, (+)-cis-. The chemical structure is. Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. It has a molecular weight of 450.98. Each Diltiazem Hydrochloride Extended-Release Capsule, USP contains either 60 mg diltiazem hydrochloride (equivalent to 55.1 mg diltiazem), 90 mg diltiazem hydrochloride (equivalent to 82.7 mg diltiazem), or 120 mg diltiazem hydrochloride (equivalent to 110.3 mg diltiazem). Also contains: sucrose, povidone, hypromellose, methacrylic acid copolymer, diethyl phthalate, FD&C Red No. 40, titanium dioxide, gelatin, black ink. The 90 mg also contains FD&C Red No. 3. For oral administration. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "75907-189-35",
"PackageDescription": "1 VIAL in 1 CARTON (75907-189-35) / 10 mL in 1 VIAL",
"NDC11Code": "75907-0189-35",
"ProductNDC": "75907-189",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclophosphamide",
"NonProprietaryName": "Cyclophosphamide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240620",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA212501",
"LabelerName": "Dr. Reddy's Labratories Inc.",
"SubstanceName": "CYCLOPHOSPHAMIDE ANHYDROUS",
"StrengthNumber": "200",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2025-07-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240620",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclophosphamide is an alkylating drug indicated for treatment of adults and pediatric patients with: 1 Malignant Diseases:malignant lymphomas: Hodgkin's disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt's lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma. (1.1).",
"Description": "Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula:. Cyclophosphamide has a molecular formula of C7H15Cl2N2O2PH2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide Injection is a 200 mg/mL sterile clear colorless solution available as 500 mg,1 g and 2 g strength vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide, 1.55 g Ethanol, 0.085 g Propylene Glycol, 0.085 g Polyethylene glycol 400 and 0.345 mg Monothioglycerol., 2 1 g vial contains 1069.0 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide, 3.1 g Ethanol, 0.17 g Propylene Glycol, 0.17 g Polyethylene glycol 400 and 0.69 mg Monothioglycerol., 3 2 g vial contains 2138.0 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide, 6.2 g Ethanol, 0.34 g Propylene glycol, 0.34 g Polyethylene glycol 400 and 1.38 mg Monothioglycerol."
},
{
"NDCCode": "75907-190-07",
"PackageDescription": "1 VIAL in 1 CARTON (75907-190-07) / 5 mL in 1 VIAL",
"NDC11Code": "75907-0190-07",
"ProductNDC": "75907-190",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclophosphamide",
"NonProprietaryName": "Cyclophosphamide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240620",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA212501",
"LabelerName": "Dr. Reddy's Labratories Inc.",
"SubstanceName": "CYCLOPHOSPHAMIDE ANHYDROUS",
"StrengthNumber": "200",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2025-07-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240620",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclophosphamide is an alkylating drug indicated for treatment of adults and pediatric patients with: 1 Malignant Diseases:malignant lymphomas: Hodgkin's disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt's lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma. (1.1).",
"Description": "Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula:. Cyclophosphamide has a molecular formula of C7H15Cl2N2O2PH2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide Injection is a 200 mg/mL sterile clear colorless solution available as 500 mg,1 g and 2 g strength vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide, 1.55 g Ethanol, 0.085 g Propylene Glycol, 0.085 g Polyethylene glycol 400 and 0.345 mg Monothioglycerol., 2 1 g vial contains 1069.0 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide, 3.1 g Ethanol, 0.17 g Propylene Glycol, 0.17 g Polyethylene glycol 400 and 0.69 mg Monothioglycerol., 3 2 g vial contains 2138.0 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide, 6.2 g Ethanol, 0.34 g Propylene glycol, 0.34 g Polyethylene glycol 400 and 1.38 mg Monothioglycerol."
},
{
"NDCCode": "75907-191-02",
"PackageDescription": "1 VIAL in 1 CARTON (75907-191-02) / 2.5 mL in 1 VIAL",
"NDC11Code": "75907-0191-02",
"ProductNDC": "75907-191",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclophosphamide",
"NonProprietaryName": "Cyclophosphamide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240620",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA212501",
"LabelerName": "Dr. Reddy's Labratories Inc.",
"SubstanceName": "CYCLOPHOSPHAMIDE ANHYDROUS",
"StrengthNumber": "200",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2025-07-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240620",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclophosphamide is an alkylating drug indicated for treatment of adults and pediatric patients with: 1 Malignant Diseases:malignant lymphomas: Hodgkin's disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt's lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma. (1.1).",
"Description": "Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula:. Cyclophosphamide has a molecular formula of C7H15Cl2N2O2PH2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide Injection is a 200 mg/mL sterile clear colorless solution available as 500 mg,1 g and 2 g strength vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide, 1.55 g Ethanol, 0.085 g Propylene Glycol, 0.085 g Polyethylene glycol 400 and 0.345 mg Monothioglycerol., 2 1 g vial contains 1069.0 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide, 3.1 g Ethanol, 0.17 g Propylene Glycol, 0.17 g Polyethylene glycol 400 and 0.69 mg Monothioglycerol., 3 2 g vial contains 2138.0 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide, 6.2 g Ethanol, 0.34 g Propylene glycol, 0.34 g Polyethylene glycol 400 and 1.38 mg Monothioglycerol."
},
{
"NDCCode": "75907-224-04",
"PackageDescription": "120 TABLET in 1 BOTTLE (75907-224-04) ",
"NDC11Code": "75907-0224-04",
"ProductNDC": "75907-224",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Abiraterone Acetate",
"NonProprietaryName": "Abiraterone Acetate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250317",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208416",
"LabelerName": "Dr. Reddys Laboratories Inc",
"SubstanceName": "ABIRATERONE ACETATE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 17A1 Inhibitor [EPC], Cytochrome P450 17A1 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250317",
"SamplePackage": "N",
"IndicationAndUsage": "Abiraterone acetate tablets are indicated in combination with prednisone for the treatment of patients with: 1 Metastatic castration-resistant prostate cancer (CRPC) , 2 Metastatic high-risk castration-sensitive prostate cancer (CSPC) .",
"Description": "Abiraterone acetate USP, the active ingredient of abiraterone acetate tablets, USP is the acetyl ester of abiraterone. Abiraterone is an inhibitor of CYP17 (17α-hydroxylase/C17,20-lyase). Each abiraterone acetate tablet, USP contains 250 mg or 500 mg of abiraterone acetate USP. Abiraterone acetate USP is designated chemically as (3β)17-(3-pyridinyl) androsta-5,16-dien-3-yl acetate and its structure is:. Abiraterone acetate USP is a white to off-white, non-hygroscopic, crystalline powder. Its molecular formula is C26H33NO2 and it has a molecular weight of 391.55. Abiraterone acetate USP is a lipophilic compound with an octanol-water partition coefficient of 5.12 (Log P) and is practically insoluble in water. The pKa of the aromatic nitrogen is 5.19. Abiraterone acetate tablets are available in 250 mg and 500 mg film-coated tablets with the following inactive ingredients: : 1 250 mg film-coated tablets: colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, sodium lauryl sulfate and titanium dioxide., 2 500 mg film-coated tablets: colloidal silicon dioxide, croscarmellose sodium, hypromellose, iron oxide black, iron oxide red, lactose monohydrate, magnesium stearate, polyethylene glycol, polyvinyl alcohol, silicified microcrystalline cellulose, sodium lauryl sulfate, talc and titanium dioxide."
},
{
"NDCCode": "75907-363-01",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (75907-363-01) / 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "75907-0363-01",
"ProductNDC": "75907-363",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxorubicin Hydrochloride",
"NonProprietaryName": "Doxorubicin Hydrochloride",
"DosageFormName": "INJECTION, SUSPENSION, LIPOSOMAL",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250627",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219199",
"LabelerName": "Dr. Reddy's Laboratories Inc.",
"SubstanceName": "DOXORUBICIN HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250627",
"SamplePackage": "N",
"IndicationAndUsage": "Doxorubicin hydrochloride liposome injection is an anthracycline topoisomerase inhibitor indicated for: 1 Ovarian cancer: After failure of platinum-based chemotherapy (1.1), 2 AIDS-related Kaposi’s Sarcoma: After failure of prior systemic chemotherapy or intolerance to such therapy (1.2), 3 Multiple Myeloma: In combination with bortezomib in patients who have not previously received bortezomib and have received at least one prior therapy (1.3).",
"Description": "The active ingredient in Doxorubicin hydrochloride liposome injection is doxorubicin hydrochloride, an anthracycline topoisomerase inhibitor, that is encapsulated in pegylated liposomes for intravenous use. The chemical name of doxorubicin hydrochloride is (8S,10S)-10-[(3-amino-2,3,6-trideoxy-α-L-lyxo-hexopyranosyl)oxy]-8-glycolyl-7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxy-5,12-naphthacenedione hydrochloride. The molecular formula is C27H29NO11HCl and the molecular weight is 579.99. The structural formula is. Doxorubicin hydrochloride liposome injection is a sterile, translucent, red liposomal dispersion. Each single-dose vial contains 20 mg or 50 mg doxorubicin hydrochloride at a concentration of 2 mg/mL (equivalent to 1.87 mg/mL of doxorubicin). The pegylated liposome carriers are composed of cholesterol, 3.19 mg/mL; fully hydrogenated soy phosphatidylcholine (HSPC), 9.58 mg/mL; and N-(carbonyl-methoxypolyethylene glycol 2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine sodium salt (MPEG-DSPE), 3.19 mg/mL. Each mL also contains ammonium sulfate, approximately 0.6 mg; histidine, 1.55 mg as a buffer; hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (6.0 to 7.0); and sucrose, 94 mg to maintain isotonicity. Greater than 90% of the drug is encapsulated in the pegylated liposomes. MPEG-DSPE has the following structural formula. HSPC has the following structural formula. Representation of a pegylated liposome."
},
{
"NDCCode": "75907-364-01",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (75907-364-01) / 25 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "75907-0364-01",
"ProductNDC": "75907-364",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxorubicin Hydrochloride",
"NonProprietaryName": "Doxorubicin Hydrochloride",
"DosageFormName": "INJECTION, SUSPENSION, LIPOSOMAL",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250627",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219199",
"LabelerName": "Dr. Reddy's Laboratories Inc.",
"SubstanceName": "DOXORUBICIN HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250627",
"SamplePackage": "N",
"IndicationAndUsage": "Doxorubicin hydrochloride liposome injection is an anthracycline topoisomerase inhibitor indicated for: 1 Ovarian cancer: After failure of platinum-based chemotherapy (1.1), 2 AIDS-related Kaposi’s Sarcoma: After failure of prior systemic chemotherapy or intolerance to such therapy (1.2), 3 Multiple Myeloma: In combination with bortezomib in patients who have not previously received bortezomib and have received at least one prior therapy (1.3).",
"Description": "The active ingredient in Doxorubicin hydrochloride liposome injection is doxorubicin hydrochloride, an anthracycline topoisomerase inhibitor, that is encapsulated in pegylated liposomes for intravenous use. The chemical name of doxorubicin hydrochloride is (8S,10S)-10-[(3-amino-2,3,6-trideoxy-α-L-lyxo-hexopyranosyl)oxy]-8-glycolyl-7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxy-5,12-naphthacenedione hydrochloride. The molecular formula is C27H29NO11HCl and the molecular weight is 579.99. The structural formula is. Doxorubicin hydrochloride liposome injection is a sterile, translucent, red liposomal dispersion. Each single-dose vial contains 20 mg or 50 mg doxorubicin hydrochloride at a concentration of 2 mg/mL (equivalent to 1.87 mg/mL of doxorubicin). The pegylated liposome carriers are composed of cholesterol, 3.19 mg/mL; fully hydrogenated soy phosphatidylcholine (HSPC), 9.58 mg/mL; and N-(carbonyl-methoxypolyethylene glycol 2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine sodium salt (MPEG-DSPE), 3.19 mg/mL. Each mL also contains ammonium sulfate, approximately 0.6 mg; histidine, 1.55 mg as a buffer; hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (6.0 to 7.0); and sucrose, 94 mg to maintain isotonicity. Greater than 90% of the drug is encapsulated in the pegylated liposomes. MPEG-DSPE has the following structural formula. HSPC has the following structural formula. Representation of a pegylated liposome."
},
{
"NDCCode": "16729-090-01",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (16729-090-01) ",
"NDC11Code": "16729-0090-01",
"ProductNDC": "16729-090",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Finasteride",
"NonProprietaryName": "Finasteride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20100528",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090121",
"LabelerName": "Accord Healthcare, Inc.",
"SubstanceName": "FINASTERIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "5-alpha Reductase Inhibitor [EPC], 5-alpha Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20100824",
"SamplePackage": "N",
"IndicationAndUsage": "Finasteride, is a 5α-reductase inhibitor, indicated for the treatment of symptomatic benign prostatic hyperplasia (BPH) in men with an enlarged prostate to ( 1.1): : 1 Improve symptoms, 2 Reduce the risk of acute urinary retention, 3 Reduce the risk of the need for surgery including transurethral resection of the prostate (TURP) and prostatectomy.",
"Description": "Finasteride, a synthetic 4-azasteroid compound, is a specific inhibitor of steroid Type II 5α-reductase, an intracellular enzyme that converts the androgen testosterone into 5α-dihydrotestosterone (DHT). Finasteride is 4-azaandrost-1-ene-17-carboxamide, N-(1,1-dimethylethyl)-3-oxo-,(5α,17ß)-. The empirical formula of finasteride is C 23H 36N 2O 2and its molecular weight is 372.55. Its structural formula is:. Finasteride is a white crystalline powder with a melting point near 250°C. It is freely soluble in chloroform and in lower alcohol solvents, but is practically insoluble in water. Finasteride tablets, USP for oral administration are film-coated tablets that contain 5 mg of finasteride and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize), sodium starch glycolate, hypromellose, titanium dioxide, magnesium stearate, lauryl macrogolglycerides, FD&C Blue # 2 aluminum lake and polyethylene glycol."
},
{
"NDCCode": "16729-090-10",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (16729-090-10) ",
"NDC11Code": "16729-0090-10",
"ProductNDC": "16729-090",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Finasteride",
"NonProprietaryName": "Finasteride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20100528",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090121",
"LabelerName": "Accord Healthcare, Inc.",
"SubstanceName": "FINASTERIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "5-alpha Reductase Inhibitor [EPC], 5-alpha Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20100528",
"SamplePackage": "N",
"IndicationAndUsage": "Finasteride, is a 5α-reductase inhibitor, indicated for the treatment of symptomatic benign prostatic hyperplasia (BPH) in men with an enlarged prostate to ( 1.1): : 1 Improve symptoms, 2 Reduce the risk of acute urinary retention, 3 Reduce the risk of the need for surgery including transurethral resection of the prostate (TURP) and prostatectomy.",
"Description": "Finasteride, a synthetic 4-azasteroid compound, is a specific inhibitor of steroid Type II 5α-reductase, an intracellular enzyme that converts the androgen testosterone into 5α-dihydrotestosterone (DHT). Finasteride is 4-azaandrost-1-ene-17-carboxamide, N-(1,1-dimethylethyl)-3-oxo-,(5α,17ß)-. The empirical formula of finasteride is C 23H 36N 2O 2and its molecular weight is 372.55. Its structural formula is:. Finasteride is a white crystalline powder with a melting point near 250°C. It is freely soluble in chloroform and in lower alcohol solvents, but is practically insoluble in water. Finasteride tablets, USP for oral administration are film-coated tablets that contain 5 mg of finasteride and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize), sodium starch glycolate, hypromellose, titanium dioxide, magnesium stearate, lauryl macrogolglycerides, FD&C Blue # 2 aluminum lake and polyethylene glycol."
},
{
"NDCCode": "16729-090-15",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (16729-090-15) ",
"NDC11Code": "16729-0090-15",
"ProductNDC": "16729-090",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Finasteride",
"NonProprietaryName": "Finasteride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20100528",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090121",
"LabelerName": "Accord Healthcare, Inc.",
"SubstanceName": "FINASTERIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "5-alpha Reductase Inhibitor [EPC], 5-alpha Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20100608",
"SamplePackage": "N",
"IndicationAndUsage": "Finasteride, is a 5α-reductase inhibitor, indicated for the treatment of symptomatic benign prostatic hyperplasia (BPH) in men with an enlarged prostate to ( 1.1): : 1 Improve symptoms, 2 Reduce the risk of acute urinary retention, 3 Reduce the risk of the need for surgery including transurethral resection of the prostate (TURP) and prostatectomy.",
"Description": "Finasteride, a synthetic 4-azasteroid compound, is a specific inhibitor of steroid Type II 5α-reductase, an intracellular enzyme that converts the androgen testosterone into 5α-dihydrotestosterone (DHT). Finasteride is 4-azaandrost-1-ene-17-carboxamide, N-(1,1-dimethylethyl)-3-oxo-,(5α,17ß)-. The empirical formula of finasteride is C 23H 36N 2O 2and its molecular weight is 372.55. Its structural formula is:. Finasteride is a white crystalline powder with a melting point near 250°C. It is freely soluble in chloroform and in lower alcohol solvents, but is practically insoluble in water. Finasteride tablets, USP for oral administration are film-coated tablets that contain 5 mg of finasteride and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize), sodium starch glycolate, hypromellose, titanium dioxide, magnesium stearate, lauryl macrogolglycerides, FD&C Blue # 2 aluminum lake and polyethylene glycol."
},
{
"NDCCode": "16729-090-16",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (16729-090-16) ",
"NDC11Code": "16729-0090-16",
"ProductNDC": "16729-090",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Finasteride",
"NonProprietaryName": "Finasteride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20100528",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090121",
"LabelerName": "Accord Healthcare, Inc.",
"SubstanceName": "FINASTERIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "5-alpha Reductase Inhibitor [EPC], 5-alpha Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20111115",
"SamplePackage": "N",
"IndicationAndUsage": "Finasteride, is a 5α-reductase inhibitor, indicated for the treatment of symptomatic benign prostatic hyperplasia (BPH) in men with an enlarged prostate to ( 1.1): : 1 Improve symptoms, 2 Reduce the risk of acute urinary retention, 3 Reduce the risk of the need for surgery including transurethral resection of the prostate (TURP) and prostatectomy.",
"Description": "Finasteride, a synthetic 4-azasteroid compound, is a specific inhibitor of steroid Type II 5α-reductase, an intracellular enzyme that converts the androgen testosterone into 5α-dihydrotestosterone (DHT). Finasteride is 4-azaandrost-1-ene-17-carboxamide, N-(1,1-dimethylethyl)-3-oxo-,(5α,17ß)-. The empirical formula of finasteride is C 23H 36N 2O 2and its molecular weight is 372.55. Its structural formula is:. Finasteride is a white crystalline powder with a melting point near 250°C. It is freely soluble in chloroform and in lower alcohol solvents, but is practically insoluble in water. Finasteride tablets, USP for oral administration are film-coated tablets that contain 5 mg of finasteride and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize), sodium starch glycolate, hypromellose, titanium dioxide, magnesium stearate, lauryl macrogolglycerides, FD&C Blue # 2 aluminum lake and polyethylene glycol."
},
{
"NDCCode": "16729-090-17",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (16729-090-17) ",
"NDC11Code": "16729-0090-17",
"ProductNDC": "16729-090",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Finasteride",
"NonProprietaryName": "Finasteride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20100528",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090121",
"LabelerName": "Accord Healthcare, Inc.",
"SubstanceName": "FINASTERIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "5-alpha Reductase Inhibitor [EPC], 5-alpha Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-09-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20160823",
"SamplePackage": "N",
"IndicationAndUsage": "Finasteride, is a 5α-reductase inhibitor, indicated for the treatment of symptomatic benign prostatic hyperplasia (BPH) in men with an enlarged prostate to ( 1.1): : 1 Improve symptoms, 2 Reduce the risk of acute urinary retention, 3 Reduce the risk of the need for surgery including transurethral resection of the prostate (TURP) and prostatectomy.",
"Description": "Finasteride, a synthetic 4-azasteroid compound, is a specific inhibitor of steroid Type II 5α-reductase, an intracellular enzyme that converts the androgen testosterone into 5α-dihydrotestosterone (DHT). Finasteride is 4-azaandrost-1-ene-17-carboxamide, N-(1,1-dimethylethyl)-3-oxo-,(5α,17ß)-. The empirical formula of finasteride is C 23H 36N 2O 2and its molecular weight is 372.55. Its structural formula is:. Finasteride is a white crystalline powder with a melting point near 250°C. It is freely soluble in chloroform and in lower alcohol solvents, but is practically insoluble in water. Finasteride tablets, USP for oral administration are film-coated tablets that contain 5 mg of finasteride and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize), sodium starch glycolate, hypromellose, titanium dioxide, magnesium stearate, lauryl macrogolglycerides, FD&C Blue # 2 aluminum lake and polyethylene glycol."
},
{
"NDCCode": "40032-090-19",
"PackageDescription": "274.31 g in 1 BOTTLE (40032-090-19) ",
"NDC11Code": "40032-0090-19",
"ProductNDC": "40032-090",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Polyethylene Glycol-3350 And Electrolytes",
"NonProprietaryName": "Polyethylene Glycol-3350 And Electrolytes",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20090601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090231",
"LabelerName": "Novel Laboratories, Inc.",
"SubstanceName": "POLYETHYLENE GLYCOL 3350; SODIUM SULFATE ANHYDROUS; SODIUM BICARBONATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE",
"StrengthNumber": "236; 22.74; 6.74; 5.86; 2.97",
"StrengthUnit": "g/274.31g; g/274.31g; g/274.31g; g/274.31g; g/274.31g",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2023-02-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090601",
"SamplePackage": "N",
"IndicationAndUsage": "PEG-3350 and electrolytes for oral solution, USP is a combination of PEG 3350, an osmotic laxative, and electrolytes indicated for cleansing of the colon in preparation for colonoscopy and barium enema X-ray examination in adults (1).",
"Description": "PEG-3350 and electrolytes for oral solution is a combination of polyethylene glycol 3350, an osmotic laxative, and electrolytes (sodium sulfate, sodium chloride, sodium bicarbonate and potassium chloride) for oral solution supplied in a 4 liter disposable jug containing 236 g polyethylene glycol 3350, 22.74 g sodium sulfate (anhydrous), 6.74 g sodium bicarbonate, 5.86 g sodium chloride, and 2.97 g potassium chloride as a white to off-white powder. Sodium Sulfate, USP. The chemical name is Na2SO4. The average Molecular Weight is 142.04. The structural formula is. Sodium Bicarbonate, USP. The chemical name is NaHCO3. The average Molecular Weight is 84.01. The structural formula is. Sodium Chloride, USP. The chemical name is NaCl. The average Molecular Weight: 58.44. The structural formula is. Na+ Cl-. Potassium Chloride, USP. The chemical name is KCl. The average Molecular Weight: 74.55. The structural formula is. K-Cl."
},
{
"NDCCode": "43386-090-19",
"PackageDescription": "274.31 g in 1 BOTTLE (43386-090-19) ",
"NDC11Code": "43386-0090-19",
"ProductNDC": "43386-090",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gavilyte G",
"ProprietaryNameSuffix": "Tm",
"NonProprietaryName": "Polyethylene Glycol-3350 And Electrolytes",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20090601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090231",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "POLYETHYLENE GLYCOL 3350; SODIUM SULFATE ANHYDROUS; SODIUM BICARBONATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE",
"StrengthNumber": "236; 22.74; 6.74; 5.86; 2.97",
"StrengthUnit": "g/274.31g; g/274.31g; g/274.31g; g/274.31g; g/274.31g",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2025-09-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20090601",
"SamplePackage": "N",
"IndicationAndUsage": "GaviLyte-G is a combination of PEG 3350, an osmotic laxative, and electrolytes indicated for cleansing of the colon in preparation for colonoscopy and barium enema X-ray examination in adults. (1).",
"Description": "Gavilyte-G is a combination of polyethylene glycol 3350, an osmotic laxative, and electrolytes (sodium sulfate, sodium chloride, sodium bicarbonate and potassium chloride) for oral solution supplied in a 4 liter disposable jug containing 236 g polyethylene glycol 3350, 22.74 g sodium sulfate (anhydrous), 6.74 g sodium bicarbonate, 5.86 g sodium chloride, and 2.97 g potassium chloride as a white to off-white powder. Polyethylene Glycol 3350, NF. Sodium Sulfate, USP. The chemical name is Na2SO4. The average Molecular Weight is 142.04. The structural formula is. Sodium Bicarbonate, USP. The chemical name is NaHCO3. The average Molecular Weight is 84.01. The structural formula is. Sodium Chloride, USP. The chemical name is NaCl. The average Molecular Weight: 58.44. The structural formula is. Na+ Cl-. Potassium Chloride, USP. The chemical name is KCl. The average Molecular Weight: 74.55. The structural formula is. K-Cl."
},
{
"NDCCode": "43386-090-91",
"PackageDescription": "274.31 g in 1 BOTTLE (43386-090-91)",
"NDC11Code": "43386-0090-91",
"ProductNDC": "43386-090",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gavilyte G",
"ProprietaryNameSuffix": "Tm",
"NonProprietaryName": "Polyethylene Glycol-3350 And Electrolytes",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20090601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090231",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "POLYETHYLENE GLYCOL 3350; SODIUM SULFATE ANHYDROUS; SODIUM BICARBONATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE",
"StrengthNumber": "236; 22.74; 6.74; 5.86; 2.97",
"StrengthUnit": "g/274.31g; g/274.31g; g/274.31g; g/274.31g; g/274.31g",
"Pharm_Classes": "Osmotic Activity [MoA],Osmotic Laxative [EPC],Stimulation Large Intestine Fluid/Electrolyte Secretion [PE],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Potassium Compounds [CS],Potassium Salt [EPC],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "GaviLyte-G is a combination of PEG 3350, an osmotic laxative, and electrolytes indicated for cleansing of the colon in preparation for colonoscopy and barium enema X-ray examination in adults (1).",
"Description": "For oral solution: Each 4 liter (4L) GaviLyte-G jug contains a white powder for reconstitution. GaviLyte-G is a combination of polyethylene glycol 3350, an osmotic laxative, and electrolytes (sodium sulfate, sodium chloride, sodium bicarbonate and potassium chloride) for oral solution. Each 4 liter jug contains: polyethylene glycol 3350 236 g, sodium sulfate (anhydrous) 22.74 g, sodium bicarbonate 6.74 g, sodium chloride 5.86 g, potassium chloride 2.97 g. The solution is clear and colorless when reconstituted to a final volume of 4 liters with water. Polyethylene Glycol 3350, NF. Sodium Sulfate, USP. The chemical name is Na2SO4. The average Molecular Weight is 142.04. The structural formula is. Sodium Bicarbonate, USP. The chemical name is NaHCO3. The average Molecular Weight is 84.01. The structural formula is. Sodium Chloride, USP. The chemical name is NaCl. The average Molecular Weight: 58.44. The structural formula is. Na+ Cl-. Potassium Chloride, USP. The chemical name is KCl. The average Molecular Weight: 74.55. The structural formula is. K-Cl."
},
{
"NDCCode": "63187-090-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (63187-090-30) ",
"NDC11Code": "63187-0090-30",
"ProductNDC": "63187-090",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lovastatin",
"NonProprietaryName": "Lovastatin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20021125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075991",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "LOVASTATIN",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-09-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181101",
"SamplePackage": "N",
"IndicationAndUsage": "Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.",
"Description": "Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S -[1α(R *), 3α, 7β, 8β(2 S *,4 S *),8aβ]]-1,2,3, 7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H -pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24 H 36 O 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, pregelatinized cornstarch, sodium starch glycolate, butylated hydroxyaniso and talc. Butylated hydroxyanisole (BHA) is added as a preservative."
},
{
"NDCCode": "63187-090-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (63187-090-60) ",
"NDC11Code": "63187-0090-60",
"ProductNDC": "63187-090",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lovastatin",
"NonProprietaryName": "Lovastatin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20021125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075991",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "LOVASTATIN",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-09-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181101",
"SamplePackage": "N",
"IndicationAndUsage": "Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.",
"Description": "Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S -[1α(R *), 3α, 7β, 8β(2 S *,4 S *),8aβ]]-1,2,3, 7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H -pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24 H 36 O 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, pregelatinized cornstarch, sodium starch glycolate, butylated hydroxyaniso and talc. Butylated hydroxyanisole (BHA) is added as a preservative."
},
{
"NDCCode": "63187-090-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (63187-090-90) ",
"NDC11Code": "63187-0090-90",
"ProductNDC": "63187-090",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lovastatin",
"NonProprietaryName": "Lovastatin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20021125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075991",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "LOVASTATIN",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-09-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181101",
"SamplePackage": "N",
"IndicationAndUsage": "Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.",
"Description": "Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S -[1α(R *), 3α, 7β, 8β(2 S *,4 S *),8aβ]]-1,2,3, 7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H -pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24 H 36 O 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, pregelatinized cornstarch, sodium starch glycolate, butylated hydroxyaniso and talc. Butylated hydroxyanisole (BHA) is added as a preservative."
},
{
"NDCCode": "63304-090-01",
"PackageDescription": "100 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (63304-090-01) ",
"NDC11Code": "63304-0090-01",
"ProductNDC": "63304-090",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride",
"NonProprietaryName": "Potassium Chloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20200102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208864",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200102",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium chloride extended-release capsules are indicated for the treatment and prophylaxis of hypokalemia in adults and children with or without metabolic alkalosis, in patients for whom dietary management with potassium-rich foods or diuretic dose reduction is insufficient.",
"Description": "Potassium chloride extended-release capsules, USP, are an oral dosage form of microencapsulated potassium chloride containing 600 mg and 750 mg of potassium chloride, USP, equivalent to 8 mEq and 10 mEq of potassium, respectively. The chemical name of the active ingredient is potassium chloride and the structural formula is KCl. It has a molecular mass of 74.55. Potassium chloride, USP, occurs as a white granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Inactive ingredients: ethylcellulose, gelatin, magnesium stearate, sodium lauryl sulfate, titanium dioxide and edible black ink. The 10 mEq capsules also contain black iron oxide, FD&C blue No.1 and FD&C red No.3."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>75907-090-55</NDCCode>
<PackageDescription>5 BLISTER PACK in 1 CARTON (75907-090-55) / 1 KIT in 1 BLISTER PACK (75907-090-28) </PackageDescription>
<NDC11Code>75907-0090-55</NDC11Code>
<ProductNDC>75907-090</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levora</ProprietaryName>
<NonProprietaryName>Levonorgestrel And Ethinyl Estradiol</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20240930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA073594</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2025-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240930</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LEVORA 0.15/30-28 is indicated for use by females of reproductive potential to prevent pregnancy.</IndicationAndUsage>
<Description>LEVORA ®0.15/30-28 (levonorgestrel and ethinyl estradiol tablets) is a combination oral contraceptive (COC) consisting of 21 white active tablets, each containing 0.15 mg of levonorgestrel, a synthetic progestin and 0.03 mg of ethinyl estradiol, an estrogen, and 7 peach inert tablets (without hormones). The structural formulas for the active components are. Levonorgestrel is chemically 18,19-Dinorpregn-4-en-20-yn-3-one, 13-ethyl-17-hydroxy-,(17α) (-)-. Ethinyl Estradiol is 19-nor-17α-pregna-1,3,5(10)-trien-20-yne-3, 17-diol. Each white active tablet contains the following inactive ingredients: croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and povidone. Each peach inert tablet contains the following inactive ingredients: FD&C Yellow No. 6 Lake, Lactose Anhydrous, Lactose Monohydrate, Magnesium Stearate and Microcrystalline Cellulose.</Description>
</NDC>
<NDC>
<NDCCode>75907-078-55</NDCCode>
<PackageDescription>5 BLISTER PACK in 1 CARTON (75907-078-55) / 1 KIT in 1 BLISTER PACK (75907-078-28) </PackageDescription>
<NDC11Code>75907-0078-55</NDC11Code>
<ProductNDC>75907-078</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Low-ogestrel</ProprietaryName>
<NonProprietaryName>Norgestrel And Ethinyl Estradiol</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20240930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075288</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2025-07-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240930</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Low-Ogestrel is indicated for use by females of reproductive potential to prevent pregnancy. In a study of 1,287 women with a total of 11,085 cycles or 852.7 women-years of usage, the pregnancy rate in women age 15-40 years was approximately 1 pregnancy per 100 women-years of use.</IndicationAndUsage>
<Description>Low-Ogestrel is a combination oral contraceptive containing the progestational compound norgestrel and the estrogenic compound ethinyl estradiol. Norgestrel is designated as (2) (±)-13 Ethyl-17-hydroxy-18,19-dinor-17α-pregn-4-en-20-yn-3-one and ethinyl estradiol is designated as (19-nor-17α-pregna-1,3,5 (10)-trien-20-yne-3,17-diol). Each white active Low-Ogestrel tablet contains 0.3 mg norgestrel and 0.03 mg ethinyl estradiol and the following inert ingredients: croscarmellose sodium, lactose, magnesium stearate, microcrystalline cellulose, and povidone. Each peach placebo tablet contains only the following inert ingredients: anhydrous lactose, FD&C Yellow No. 6 Lake, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. Each pill pack contains 21 white active tablets and 7 peach inert tablets.</Description>
</NDC>
<NDC>
<NDCCode>75907-079-55</NDCCode>
<PackageDescription>5 BLISTER PACK in 1 CARTON (75907-079-55) / 1 KIT in 1 BLISTER PACK (75907-079-28) </PackageDescription>
<NDC11Code>75907-0079-55</NDC11Code>
<ProductNDC>75907-079</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lutera</ProprietaryName>
<NonProprietaryName>Levonorgestrel And Ethinyl Estradiol</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20240930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076625</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2025-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240930</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lutera is indicated for the prevention of pregnancy in women who elect to use oral contraceptives as a method of contraception. Oral contraceptives are highly effective. Table II lists the typical accidental pregnancy rates for users of combination oral contraceptives and other methods of contraception. The efficacy of these contraceptive methods, except sterilization, the IUD, and Norplant ®System, depends upon the reliability with which they are used. Correct and consistent use of methods can result in lower failure rates. In a clinical trial with levonorgestrel and ethinyl estradiol tablets, 1,477 subjects had 7,720 cycles of use and a total of 5 pregnancies were reported. This represents an overall pregnancy rate of 0.84 per 100 woman-years. This rate includes patients who did not take the drug correctly. One or more pills were missed during 1,479 (18.8%) of the 7,870 cycles; thus all tablets were taken during 6,391 (81.2%) of the 7,870 cycles. Of the total 7,870 cycles, a total of 150 cycles were excluded from the calculation of the Pearl index due to the use of backup contraception and/or missing 3 or more consecutive pills.</IndicationAndUsage>
<Description>Each active, white tablet (21) contains 0.1 mg of levonorgestrel, d (-)-13β-ethyl-17α-ethinyl-17β- hydroxygon-4-en-3-one, a totally synthetic progestogen, and 0.02 mg of ethinyl estradiol, 17α-ethinyl- 1,3,5(10)-estratriene-3,17β-diol. The inactive ingredients present are croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and povidone. Each inactive, peach tablet (7) contains the following inactive ingredients: FD&C Yellow #6, lactose anhydrous, lactose monohydrate, magnesium stearate, and microcrystalline cellulose.</Description>
</NDC>
<NDC>
<NDCCode>75907-089-55</NDCCode>
<PackageDescription>5 BLISTER PACK in 1 CARTON (75907-089-55) / 1 KIT in 1 BLISTER PACK (75907-089-28) </PackageDescription>
<NDC11Code>75907-0089-55</NDC11Code>
<ProductNDC>75907-089</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sronyx</ProprietaryName>
<NonProprietaryName>Levonorgestrel And Ethinyl Estradiol</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20240930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077681</ApplicationNumber>
<LabelerName>Dr. Reddy's Labratories Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2025-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240930</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oral contraceptives are indicated for the prevention of pregnancy in women who elect to use this product as a method of contraception. Oral contraceptives are highly effective. Table III lists the typical accidental pregnancy rates for users of combination oral contraceptives and other methods of contraception. The efficacy of these contraceptive methods, except sterilization, depends upon the reliability with which they are used. Correct and consistent use of methods can result in lower failure rates.</IndicationAndUsage>
<Description>Each cycle of Sronyx ®(Levonorgestrel and Ethinyl Estradiol Tablets USP) consists of 21 white active tablets each containing 0.1 mg levonorgestrel and 0.02 mg ethinyl estradiol; and seven peach tablets – inert. The inactive ingredients are Croscarmellose Sodium NF, Lactose Monohydrate NF, Magnesium Stearate NF, Microcrystalline Cellulose (PH 102) NF, and Povidone (K29/32) NF. Each inactive, placebo tablet contains the following inactive ingredients: FD & C Yellow #6 Lake 35-42%, Lactose Anhydrous (DT Micro) NF, Lactose Monohydrate (200M) NF, Magnesium Stearate NF and Microcrystalline Cellulose NF. Levonorgestrel has a molecular weight of 312.4 and a molecular formula of C 21H 28O 2. Ethinyl estradiol has a molecular weight of 296.4 and a molecular formula of C 20H 24O 2. The structural formulas are as follows:.</Description>
</NDC>
<NDC>
<NDCCode>75907-260-55</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (75907-260-55) </PackageDescription>
<NDC11Code>75907-0260-55</NDC11Code>
<ProductNDC>75907-260</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Acetaminophen Ibuprofen (nsaid)</ProprietaryName>
<NonProprietaryName>Acetaminophen And Ibuprofen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250219</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218247</ApplicationNumber>
<LabelerName>Dr. Reddy's Labortories Inc</LabelerName>
<SubstanceName>ACETAMINOPHEN; IBUPROFEN</SubstanceName>
<StrengthNumber>250; 125</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-07-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250219</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses: 1 temporarily relieves minor aches and pains due to:backachemuscular achesminor pain of arthritisheadachetoothachemenstrual cramps.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>43744-090-55</NDCCode>
<PackageDescription>500 g in 1 DRUM (43744-090-55)</PackageDescription>
<NDC11Code>43744-0090-55</NDC11Code>
<ProductNDC>43744-090</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Bimatoprost</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20120707</StartMarketingDate>
<EndMarketingDate>20130624</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>CBSCHEM LIMITED</LabelerName>
<SubstanceName>BIMATOPROST</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20130624</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>51346-090-01</NDCCode>
<PackageDescription>55 mL in 1 CARTON (51346-090-01)</PackageDescription>
<NDC11Code>51346-0090-01</NDC11Code>
<ProductNDC>51346-090</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Solie</ProprietaryName>
<NonProprietaryName>Dimethicone</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20110601</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part347</ApplicationNumber>
<LabelerName>NATURE REPUBLIC CO., LTD.</LabelerName>
<SubstanceName>DIMETHICONE</SubstanceName>
<StrengthNumber>.77</StrengthNumber>
<StrengthUnit>g/55mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>52828-090-55</NDCCode>
<PackageDescription>208 L in 1 CONTAINER (52828-090-55)</PackageDescription>
<NDC11Code>52828-0090-55</NDC11Code>
<ProductNDC>52828-090</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Mineral Oil</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<StartMarketingDate>20101119</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Lub-Line Corp</LabelerName>
<SubstanceName>MINERAL OIL</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>L/100L</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>59115-090-55</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (59115-090-55) </PackageDescription>
<NDC11Code>59115-0090-55</NDC11Code>
<ProductNDC>59115-090</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Risperidone</ProprietaryName>
<NonProprietaryName>Risperidone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078740</ApplicationNumber>
<LabelerName>Hikma Pharmaceutical</LabelerName>
<SubstanceName>RISPERIDONE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-12-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>75907-044-01</NDCCode>
<PackageDescription>100 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (75907-044-01) </PackageDescription>
<NDC11Code>75907-0044-01</NDC11Code>
<ProductNDC>75907-044</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diltiazem Hydrochloride Extended-release</ProprietaryName>
<NonProprietaryName>Diltiazem Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240910</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215775</ApplicationNumber>
<LabelerName>Dr. Reddy's Labratories Inc.</LabelerName>
<SubstanceName>DILTIAZEM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-09-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240910</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diltiazem Hydrochloride Extended-Release Capsules (Twice-a-Day Dosage) are indicated for the treatment of hypertension. They may be used alone or in combination with other antihypertensive medications, such as diuretics.</IndicationAndUsage>
<Description>Diltiazem hydrochloride is a calcium ion cellular influx inhibitor (slow channel blocker or calcium antagonist). Chemically, diltiazem hydrochloride is 1,5-Benzothiazepin-4(5H)-one, 3-(acetyloxy)-5-[2-(dimethylamino) ethyl]-2, 3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride, (+)-cis-. The chemical structure is. Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. It has a molecular weight of 450.98. Each Diltiazem Hydrochloride Extended-Release Capsule, USP contains either 60 mg diltiazem hydrochloride (equivalent to 55.1 mg diltiazem), 90 mg diltiazem hydrochloride (equivalent to 82.7 mg diltiazem), or 120 mg diltiazem hydrochloride (equivalent to 110.3 mg diltiazem). Also contains: sucrose, povidone, hypromellose, methacrylic acid copolymer, diethyl phthalate, FD&C Red No. 40, titanium dioxide, gelatin, black ink. The 90 mg also contains FD&C Red No. 3. For oral administration. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>75907-045-01</NDCCode>
<PackageDescription>100 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (75907-045-01) </PackageDescription>
<NDC11Code>75907-0045-01</NDC11Code>
<ProductNDC>75907-045</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diltiazem Hydrochloride Extended-release</ProprietaryName>
<NonProprietaryName>Diltiazem Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240910</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215775</ApplicationNumber>
<LabelerName>Dr. Reddy's Labratories Inc.</LabelerName>
<SubstanceName>DILTIAZEM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>90</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-09-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240910</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diltiazem Hydrochloride Extended-Release Capsules (Twice-a-Day Dosage) are indicated for the treatment of hypertension. They may be used alone or in combination with other antihypertensive medications, such as diuretics.</IndicationAndUsage>
<Description>Diltiazem hydrochloride is a calcium ion cellular influx inhibitor (slow channel blocker or calcium antagonist). Chemically, diltiazem hydrochloride is 1,5-Benzothiazepin-4(5H)-one, 3-(acetyloxy)-5-[2-(dimethylamino) ethyl]-2, 3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride, (+)-cis-. The chemical structure is. Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. It has a molecular weight of 450.98. Each Diltiazem Hydrochloride Extended-Release Capsule, USP contains either 60 mg diltiazem hydrochloride (equivalent to 55.1 mg diltiazem), 90 mg diltiazem hydrochloride (equivalent to 82.7 mg diltiazem), or 120 mg diltiazem hydrochloride (equivalent to 110.3 mg diltiazem). Also contains: sucrose, povidone, hypromellose, methacrylic acid copolymer, diethyl phthalate, FD&C Red No. 40, titanium dioxide, gelatin, black ink. The 90 mg also contains FD&C Red No. 3. For oral administration. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>75907-046-01</NDCCode>
<PackageDescription>100 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (75907-046-01) </PackageDescription>
<NDC11Code>75907-0046-01</NDC11Code>
<ProductNDC>75907-046</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diltiazem Hydrochloride Extended-release</ProprietaryName>
<NonProprietaryName>Diltiazem Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240910</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215775</ApplicationNumber>
<LabelerName>Dr. Reddy's Labratories Inc.</LabelerName>
<SubstanceName>DILTIAZEM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>120</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-09-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240910</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diltiazem Hydrochloride Extended-Release Capsules (Twice-a-Day Dosage) are indicated for the treatment of hypertension. They may be used alone or in combination with other antihypertensive medications, such as diuretics.</IndicationAndUsage>
<Description>Diltiazem hydrochloride is a calcium ion cellular influx inhibitor (slow channel blocker or calcium antagonist). Chemically, diltiazem hydrochloride is 1,5-Benzothiazepin-4(5H)-one, 3-(acetyloxy)-5-[2-(dimethylamino) ethyl]-2, 3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride, (+)-cis-. The chemical structure is. Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. It has a molecular weight of 450.98. Each Diltiazem Hydrochloride Extended-Release Capsule, USP contains either 60 mg diltiazem hydrochloride (equivalent to 55.1 mg diltiazem), 90 mg diltiazem hydrochloride (equivalent to 82.7 mg diltiazem), or 120 mg diltiazem hydrochloride (equivalent to 110.3 mg diltiazem). Also contains: sucrose, povidone, hypromellose, methacrylic acid copolymer, diethyl phthalate, FD&C Red No. 40, titanium dioxide, gelatin, black ink. The 90 mg also contains FD&C Red No. 3. For oral administration. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>75907-189-35</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (75907-189-35) / 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>75907-0189-35</NDC11Code>
<ProductNDC>75907-189</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclophosphamide</ProprietaryName>
<NonProprietaryName>Cyclophosphamide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240620</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA212501</ApplicationNumber>
<LabelerName>Dr. Reddy's Labratories Inc.</LabelerName>
<SubstanceName>CYCLOPHOSPHAMIDE ANHYDROUS</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-07-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240620</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclophosphamide is an alkylating drug indicated for treatment of adults and pediatric patients with: 1 Malignant Diseases:malignant lymphomas: Hodgkin's disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt's lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma. (1.1).</IndicationAndUsage>
<Description>Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula:. Cyclophosphamide has a molecular formula of C7H15Cl2N2O2PH2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide Injection is a 200 mg/mL sterile clear colorless solution available as 500 mg,1 g and 2 g strength vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide, 1.55 g Ethanol, 0.085 g Propylene Glycol, 0.085 g Polyethylene glycol 400 and 0.345 mg Monothioglycerol., 2 1 g vial contains 1069.0 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide, 3.1 g Ethanol, 0.17 g Propylene Glycol, 0.17 g Polyethylene glycol 400 and 0.69 mg Monothioglycerol., 3 2 g vial contains 2138.0 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide, 6.2 g Ethanol, 0.34 g Propylene glycol, 0.34 g Polyethylene glycol 400 and 1.38 mg Monothioglycerol.</Description>
</NDC>
<NDC>
<NDCCode>75907-190-07</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (75907-190-07) / 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>75907-0190-07</NDC11Code>
<ProductNDC>75907-190</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclophosphamide</ProprietaryName>
<NonProprietaryName>Cyclophosphamide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240620</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA212501</ApplicationNumber>
<LabelerName>Dr. Reddy's Labratories Inc.</LabelerName>
<SubstanceName>CYCLOPHOSPHAMIDE ANHYDROUS</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-07-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240620</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclophosphamide is an alkylating drug indicated for treatment of adults and pediatric patients with: 1 Malignant Diseases:malignant lymphomas: Hodgkin's disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt's lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma. (1.1).</IndicationAndUsage>
<Description>Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula:. Cyclophosphamide has a molecular formula of C7H15Cl2N2O2PH2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide Injection is a 200 mg/mL sterile clear colorless solution available as 500 mg,1 g and 2 g strength vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide, 1.55 g Ethanol, 0.085 g Propylene Glycol, 0.085 g Polyethylene glycol 400 and 0.345 mg Monothioglycerol., 2 1 g vial contains 1069.0 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide, 3.1 g Ethanol, 0.17 g Propylene Glycol, 0.17 g Polyethylene glycol 400 and 0.69 mg Monothioglycerol., 3 2 g vial contains 2138.0 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide, 6.2 g Ethanol, 0.34 g Propylene glycol, 0.34 g Polyethylene glycol 400 and 1.38 mg Monothioglycerol.</Description>
</NDC>
<NDC>
<NDCCode>75907-191-02</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (75907-191-02) / 2.5 mL in 1 VIAL</PackageDescription>
<NDC11Code>75907-0191-02</NDC11Code>
<ProductNDC>75907-191</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclophosphamide</ProprietaryName>
<NonProprietaryName>Cyclophosphamide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240620</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA212501</ApplicationNumber>
<LabelerName>Dr. Reddy's Labratories Inc.</LabelerName>
<SubstanceName>CYCLOPHOSPHAMIDE ANHYDROUS</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-07-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240620</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclophosphamide is an alkylating drug indicated for treatment of adults and pediatric patients with: 1 Malignant Diseases:malignant lymphomas: Hodgkin's disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt's lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma. (1.1).</IndicationAndUsage>
<Description>Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula:. Cyclophosphamide has a molecular formula of C7H15Cl2N2O2PH2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide Injection is a 200 mg/mL sterile clear colorless solution available as 500 mg,1 g and 2 g strength vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide, 1.55 g Ethanol, 0.085 g Propylene Glycol, 0.085 g Polyethylene glycol 400 and 0.345 mg Monothioglycerol., 2 1 g vial contains 1069.0 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide, 3.1 g Ethanol, 0.17 g Propylene Glycol, 0.17 g Polyethylene glycol 400 and 0.69 mg Monothioglycerol., 3 2 g vial contains 2138.0 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide, 6.2 g Ethanol, 0.34 g Propylene glycol, 0.34 g Polyethylene glycol 400 and 1.38 mg Monothioglycerol.</Description>
</NDC>
<NDC>
<NDCCode>75907-224-04</NDCCode>
<PackageDescription>120 TABLET in 1 BOTTLE (75907-224-04) </PackageDescription>
<NDC11Code>75907-0224-04</NDC11Code>
<ProductNDC>75907-224</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Abiraterone Acetate</ProprietaryName>
<NonProprietaryName>Abiraterone Acetate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250317</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208416</ApplicationNumber>
<LabelerName>Dr. Reddys Laboratories Inc</LabelerName>
<SubstanceName>ABIRATERONE ACETATE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 17A1 Inhibitor [EPC], Cytochrome P450 17A1 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250317</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Abiraterone acetate tablets are indicated in combination with prednisone for the treatment of patients with: 1 Metastatic castration-resistant prostate cancer (CRPC) , 2 Metastatic high-risk castration-sensitive prostate cancer (CSPC) .</IndicationAndUsage>
<Description>Abiraterone acetate USP, the active ingredient of abiraterone acetate tablets, USP is the acetyl ester of abiraterone. Abiraterone is an inhibitor of CYP17 (17α-hydroxylase/C17,20-lyase). Each abiraterone acetate tablet, USP contains 250 mg or 500 mg of abiraterone acetate USP. Abiraterone acetate USP is designated chemically as (3β)17-(3-pyridinyl) androsta-5,16-dien-3-yl acetate and its structure is:. Abiraterone acetate USP is a white to off-white, non-hygroscopic, crystalline powder. Its molecular formula is C26H33NO2 and it has a molecular weight of 391.55. Abiraterone acetate USP is a lipophilic compound with an octanol-water partition coefficient of 5.12 (Log P) and is practically insoluble in water. The pKa of the aromatic nitrogen is 5.19. Abiraterone acetate tablets are available in 250 mg and 500 mg film-coated tablets with the following inactive ingredients: : 1 250 mg film-coated tablets: colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, sodium lauryl sulfate and titanium dioxide., 2 500 mg film-coated tablets: colloidal silicon dioxide, croscarmellose sodium, hypromellose, iron oxide black, iron oxide red, lactose monohydrate, magnesium stearate, polyethylene glycol, polyvinyl alcohol, silicified microcrystalline cellulose, sodium lauryl sulfate, talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>75907-363-01</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (75907-363-01) / 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>75907-0363-01</NDC11Code>
<ProductNDC>75907-363</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxorubicin Hydrochloride</ProprietaryName>
<NonProprietaryName>Doxorubicin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION, LIPOSOMAL</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250627</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219199</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
<SubstanceName>DOXORUBICIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250627</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Doxorubicin hydrochloride liposome injection is an anthracycline topoisomerase inhibitor indicated for: 1 Ovarian cancer: After failure of platinum-based chemotherapy (1.1), 2 AIDS-related Kaposi’s Sarcoma: After failure of prior systemic chemotherapy or intolerance to such therapy (1.2), 3 Multiple Myeloma: In combination with bortezomib in patients who have not previously received bortezomib and have received at least one prior therapy (1.3).</IndicationAndUsage>
<Description>The active ingredient in Doxorubicin hydrochloride liposome injection is doxorubicin hydrochloride, an anthracycline topoisomerase inhibitor, that is encapsulated in pegylated liposomes for intravenous use. The chemical name of doxorubicin hydrochloride is (8S,10S)-10-[(3-amino-2,3,6-trideoxy-α-L-lyxo-hexopyranosyl)oxy]-8-glycolyl-7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxy-5,12-naphthacenedione hydrochloride. The molecular formula is C27H29NO11HCl and the molecular weight is 579.99. The structural formula is. Doxorubicin hydrochloride liposome injection is a sterile, translucent, red liposomal dispersion. Each single-dose vial contains 20 mg or 50 mg doxorubicin hydrochloride at a concentration of 2 mg/mL (equivalent to 1.87 mg/mL of doxorubicin). The pegylated liposome carriers are composed of cholesterol, 3.19 mg/mL; fully hydrogenated soy phosphatidylcholine (HSPC), 9.58 mg/mL; and N-(carbonyl-methoxypolyethylene glycol 2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine sodium salt (MPEG-DSPE), 3.19 mg/mL. Each mL also contains ammonium sulfate, approximately 0.6 mg; histidine, 1.55 mg as a buffer; hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (6.0 to 7.0); and sucrose, 94 mg to maintain isotonicity. Greater than 90% of the drug is encapsulated in the pegylated liposomes. MPEG-DSPE has the following structural formula. HSPC has the following structural formula. Representation of a pegylated liposome.</Description>
</NDC>
<NDC>
<NDCCode>75907-364-01</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (75907-364-01) / 25 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>75907-0364-01</NDC11Code>
<ProductNDC>75907-364</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxorubicin Hydrochloride</ProprietaryName>
<NonProprietaryName>Doxorubicin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION, LIPOSOMAL</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250627</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219199</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
<SubstanceName>DOXORUBICIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250627</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Doxorubicin hydrochloride liposome injection is an anthracycline topoisomerase inhibitor indicated for: 1 Ovarian cancer: After failure of platinum-based chemotherapy (1.1), 2 AIDS-related Kaposi’s Sarcoma: After failure of prior systemic chemotherapy or intolerance to such therapy (1.2), 3 Multiple Myeloma: In combination with bortezomib in patients who have not previously received bortezomib and have received at least one prior therapy (1.3).</IndicationAndUsage>
<Description>The active ingredient in Doxorubicin hydrochloride liposome injection is doxorubicin hydrochloride, an anthracycline topoisomerase inhibitor, that is encapsulated in pegylated liposomes for intravenous use. The chemical name of doxorubicin hydrochloride is (8S,10S)-10-[(3-amino-2,3,6-trideoxy-α-L-lyxo-hexopyranosyl)oxy]-8-glycolyl-7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxy-5,12-naphthacenedione hydrochloride. The molecular formula is C27H29NO11HCl and the molecular weight is 579.99. The structural formula is. Doxorubicin hydrochloride liposome injection is a sterile, translucent, red liposomal dispersion. Each single-dose vial contains 20 mg or 50 mg doxorubicin hydrochloride at a concentration of 2 mg/mL (equivalent to 1.87 mg/mL of doxorubicin). The pegylated liposome carriers are composed of cholesterol, 3.19 mg/mL; fully hydrogenated soy phosphatidylcholine (HSPC), 9.58 mg/mL; and N-(carbonyl-methoxypolyethylene glycol 2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine sodium salt (MPEG-DSPE), 3.19 mg/mL. Each mL also contains ammonium sulfate, approximately 0.6 mg; histidine, 1.55 mg as a buffer; hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (6.0 to 7.0); and sucrose, 94 mg to maintain isotonicity. Greater than 90% of the drug is encapsulated in the pegylated liposomes. MPEG-DSPE has the following structural formula. HSPC has the following structural formula. Representation of a pegylated liposome.</Description>
</NDC>
<NDC>
<NDCCode>16729-090-01</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (16729-090-01) </PackageDescription>
<NDC11Code>16729-0090-01</NDC11Code>
<ProductNDC>16729-090</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Finasteride</ProprietaryName>
<NonProprietaryName>Finasteride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100528</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090121</ApplicationNumber>
<LabelerName>Accord Healthcare, Inc.</LabelerName>
<SubstanceName>FINASTERIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>5-alpha Reductase Inhibitor [EPC], 5-alpha Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100824</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Finasteride, is a 5α-reductase inhibitor, indicated for the treatment of symptomatic benign prostatic hyperplasia (BPH) in men with an enlarged prostate to ( 1.1): : 1 Improve symptoms, 2 Reduce the risk of acute urinary retention, 3 Reduce the risk of the need for surgery including transurethral resection of the prostate (TURP) and prostatectomy.</IndicationAndUsage>
<Description>Finasteride, a synthetic 4-azasteroid compound, is a specific inhibitor of steroid Type II 5α-reductase, an intracellular enzyme that converts the androgen testosterone into 5α-dihydrotestosterone (DHT). Finasteride is 4-azaandrost-1-ene-17-carboxamide, N-(1,1-dimethylethyl)-3-oxo-,(5α,17ß)-. The empirical formula of finasteride is C 23H 36N 2O 2and its molecular weight is 372.55. Its structural formula is:. Finasteride is a white crystalline powder with a melting point near 250°C. It is freely soluble in chloroform and in lower alcohol solvents, but is practically insoluble in water. Finasteride tablets, USP for oral administration are film-coated tablets that contain 5 mg of finasteride and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize), sodium starch glycolate, hypromellose, titanium dioxide, magnesium stearate, lauryl macrogolglycerides, FD&C Blue # 2 aluminum lake and polyethylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>16729-090-10</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (16729-090-10) </PackageDescription>
<NDC11Code>16729-0090-10</NDC11Code>
<ProductNDC>16729-090</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Finasteride</ProprietaryName>
<NonProprietaryName>Finasteride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100528</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090121</ApplicationNumber>
<LabelerName>Accord Healthcare, Inc.</LabelerName>
<SubstanceName>FINASTERIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>5-alpha Reductase Inhibitor [EPC], 5-alpha Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100528</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Finasteride, is a 5α-reductase inhibitor, indicated for the treatment of symptomatic benign prostatic hyperplasia (BPH) in men with an enlarged prostate to ( 1.1): : 1 Improve symptoms, 2 Reduce the risk of acute urinary retention, 3 Reduce the risk of the need for surgery including transurethral resection of the prostate (TURP) and prostatectomy.</IndicationAndUsage>
<Description>Finasteride, a synthetic 4-azasteroid compound, is a specific inhibitor of steroid Type II 5α-reductase, an intracellular enzyme that converts the androgen testosterone into 5α-dihydrotestosterone (DHT). Finasteride is 4-azaandrost-1-ene-17-carboxamide, N-(1,1-dimethylethyl)-3-oxo-,(5α,17ß)-. The empirical formula of finasteride is C 23H 36N 2O 2and its molecular weight is 372.55. Its structural formula is:. Finasteride is a white crystalline powder with a melting point near 250°C. It is freely soluble in chloroform and in lower alcohol solvents, but is practically insoluble in water. Finasteride tablets, USP for oral administration are film-coated tablets that contain 5 mg of finasteride and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize), sodium starch glycolate, hypromellose, titanium dioxide, magnesium stearate, lauryl macrogolglycerides, FD&C Blue # 2 aluminum lake and polyethylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>16729-090-15</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (16729-090-15) </PackageDescription>
<NDC11Code>16729-0090-15</NDC11Code>
<ProductNDC>16729-090</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Finasteride</ProprietaryName>
<NonProprietaryName>Finasteride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100528</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090121</ApplicationNumber>
<LabelerName>Accord Healthcare, Inc.</LabelerName>
<SubstanceName>FINASTERIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>5-alpha Reductase Inhibitor [EPC], 5-alpha Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100608</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Finasteride, is a 5α-reductase inhibitor, indicated for the treatment of symptomatic benign prostatic hyperplasia (BPH) in men with an enlarged prostate to ( 1.1): : 1 Improve symptoms, 2 Reduce the risk of acute urinary retention, 3 Reduce the risk of the need for surgery including transurethral resection of the prostate (TURP) and prostatectomy.</IndicationAndUsage>
<Description>Finasteride, a synthetic 4-azasteroid compound, is a specific inhibitor of steroid Type II 5α-reductase, an intracellular enzyme that converts the androgen testosterone into 5α-dihydrotestosterone (DHT). Finasteride is 4-azaandrost-1-ene-17-carboxamide, N-(1,1-dimethylethyl)-3-oxo-,(5α,17ß)-. The empirical formula of finasteride is C 23H 36N 2O 2and its molecular weight is 372.55. Its structural formula is:. Finasteride is a white crystalline powder with a melting point near 250°C. It is freely soluble in chloroform and in lower alcohol solvents, but is practically insoluble in water. Finasteride tablets, USP for oral administration are film-coated tablets that contain 5 mg of finasteride and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize), sodium starch glycolate, hypromellose, titanium dioxide, magnesium stearate, lauryl macrogolglycerides, FD&C Blue # 2 aluminum lake and polyethylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>16729-090-16</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (16729-090-16) </PackageDescription>
<NDC11Code>16729-0090-16</NDC11Code>
<ProductNDC>16729-090</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Finasteride</ProprietaryName>
<NonProprietaryName>Finasteride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100528</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090121</ApplicationNumber>
<LabelerName>Accord Healthcare, Inc.</LabelerName>
<SubstanceName>FINASTERIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>5-alpha Reductase Inhibitor [EPC], 5-alpha Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20111115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Finasteride, is a 5α-reductase inhibitor, indicated for the treatment of symptomatic benign prostatic hyperplasia (BPH) in men with an enlarged prostate to ( 1.1): : 1 Improve symptoms, 2 Reduce the risk of acute urinary retention, 3 Reduce the risk of the need for surgery including transurethral resection of the prostate (TURP) and prostatectomy.</IndicationAndUsage>
<Description>Finasteride, a synthetic 4-azasteroid compound, is a specific inhibitor of steroid Type II 5α-reductase, an intracellular enzyme that converts the androgen testosterone into 5α-dihydrotestosterone (DHT). Finasteride is 4-azaandrost-1-ene-17-carboxamide, N-(1,1-dimethylethyl)-3-oxo-,(5α,17ß)-. The empirical formula of finasteride is C 23H 36N 2O 2and its molecular weight is 372.55. Its structural formula is:. Finasteride is a white crystalline powder with a melting point near 250°C. It is freely soluble in chloroform and in lower alcohol solvents, but is practically insoluble in water. Finasteride tablets, USP for oral administration are film-coated tablets that contain 5 mg of finasteride and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize), sodium starch glycolate, hypromellose, titanium dioxide, magnesium stearate, lauryl macrogolglycerides, FD&C Blue # 2 aluminum lake and polyethylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>16729-090-17</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (16729-090-17) </PackageDescription>
<NDC11Code>16729-0090-17</NDC11Code>
<ProductNDC>16729-090</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Finasteride</ProprietaryName>
<NonProprietaryName>Finasteride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100528</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090121</ApplicationNumber>
<LabelerName>Accord Healthcare, Inc.</LabelerName>
<SubstanceName>FINASTERIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>5-alpha Reductase Inhibitor [EPC], 5-alpha Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-09-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160823</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Finasteride, is a 5α-reductase inhibitor, indicated for the treatment of symptomatic benign prostatic hyperplasia (BPH) in men with an enlarged prostate to ( 1.1): : 1 Improve symptoms, 2 Reduce the risk of acute urinary retention, 3 Reduce the risk of the need for surgery including transurethral resection of the prostate (TURP) and prostatectomy.</IndicationAndUsage>
<Description>Finasteride, a synthetic 4-azasteroid compound, is a specific inhibitor of steroid Type II 5α-reductase, an intracellular enzyme that converts the androgen testosterone into 5α-dihydrotestosterone (DHT). Finasteride is 4-azaandrost-1-ene-17-carboxamide, N-(1,1-dimethylethyl)-3-oxo-,(5α,17ß)-. The empirical formula of finasteride is C 23H 36N 2O 2and its molecular weight is 372.55. Its structural formula is:. Finasteride is a white crystalline powder with a melting point near 250°C. It is freely soluble in chloroform and in lower alcohol solvents, but is practically insoluble in water. Finasteride tablets, USP for oral administration are film-coated tablets that contain 5 mg of finasteride and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize), sodium starch glycolate, hypromellose, titanium dioxide, magnesium stearate, lauryl macrogolglycerides, FD&C Blue # 2 aluminum lake and polyethylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>40032-090-19</NDCCode>
<PackageDescription>274.31 g in 1 BOTTLE (40032-090-19) </PackageDescription>
<NDC11Code>40032-0090-19</NDC11Code>
<ProductNDC>40032-090</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Polyethylene Glycol-3350 And Electrolytes</ProprietaryName>
<NonProprietaryName>Polyethylene Glycol-3350 And Electrolytes</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090231</ApplicationNumber>
<LabelerName>Novel Laboratories, Inc.</LabelerName>
<SubstanceName>POLYETHYLENE GLYCOL 3350; SODIUM SULFATE ANHYDROUS; SODIUM BICARBONATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>236; 22.74; 6.74; 5.86; 2.97</StrengthNumber>
<StrengthUnit>g/274.31g; g/274.31g; g/274.31g; g/274.31g; g/274.31g</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-02-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PEG-3350 and electrolytes for oral solution, USP is a combination of PEG 3350, an osmotic laxative, and electrolytes indicated for cleansing of the colon in preparation for colonoscopy and barium enema X-ray examination in adults (1).</IndicationAndUsage>
<Description>PEG-3350 and electrolytes for oral solution is a combination of polyethylene glycol 3350, an osmotic laxative, and electrolytes (sodium sulfate, sodium chloride, sodium bicarbonate and potassium chloride) for oral solution supplied in a 4 liter disposable jug containing 236 g polyethylene glycol 3350, 22.74 g sodium sulfate (anhydrous), 6.74 g sodium bicarbonate, 5.86 g sodium chloride, and 2.97 g potassium chloride as a white to off-white powder. Sodium Sulfate, USP. The chemical name is Na2SO4. The average Molecular Weight is 142.04. The structural formula is. Sodium Bicarbonate, USP. The chemical name is NaHCO3. The average Molecular Weight is 84.01. The structural formula is. Sodium Chloride, USP. The chemical name is NaCl. The average Molecular Weight: 58.44. The structural formula is. Na+ Cl-. Potassium Chloride, USP. The chemical name is KCl. The average Molecular Weight: 74.55. The structural formula is. K-Cl.</Description>
</NDC>
<NDC>
<NDCCode>43386-090-19</NDCCode>
<PackageDescription>274.31 g in 1 BOTTLE (43386-090-19) </PackageDescription>
<NDC11Code>43386-0090-19</NDC11Code>
<ProductNDC>43386-090</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gavilyte G</ProprietaryName>
<ProprietaryNameSuffix>Tm</ProprietaryNameSuffix>
<NonProprietaryName>Polyethylene Glycol-3350 And Electrolytes</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090231</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>POLYETHYLENE GLYCOL 3350; SODIUM SULFATE ANHYDROUS; SODIUM BICARBONATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>236; 22.74; 6.74; 5.86; 2.97</StrengthNumber>
<StrengthUnit>g/274.31g; g/274.31g; g/274.31g; g/274.31g; g/274.31g</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>GaviLyte-G is a combination of PEG 3350, an osmotic laxative, and electrolytes indicated for cleansing of the colon in preparation for colonoscopy and barium enema X-ray examination in adults. (1).</IndicationAndUsage>
<Description>Gavilyte-G is a combination of polyethylene glycol 3350, an osmotic laxative, and electrolytes (sodium sulfate, sodium chloride, sodium bicarbonate and potassium chloride) for oral solution supplied in a 4 liter disposable jug containing 236 g polyethylene glycol 3350, 22.74 g sodium sulfate (anhydrous), 6.74 g sodium bicarbonate, 5.86 g sodium chloride, and 2.97 g potassium chloride as a white to off-white powder. Polyethylene Glycol 3350, NF. Sodium Sulfate, USP. The chemical name is Na2SO4. The average Molecular Weight is 142.04. The structural formula is. Sodium Bicarbonate, USP. The chemical name is NaHCO3. The average Molecular Weight is 84.01. The structural formula is. Sodium Chloride, USP. The chemical name is NaCl. The average Molecular Weight: 58.44. The structural formula is. Na+ Cl-. Potassium Chloride, USP. The chemical name is KCl. The average Molecular Weight: 74.55. The structural formula is. K-Cl.</Description>
</NDC>
<NDC>
<NDCCode>43386-090-91</NDCCode>
<PackageDescription>274.31 g in 1 BOTTLE (43386-090-91)</PackageDescription>
<NDC11Code>43386-0090-91</NDC11Code>
<ProductNDC>43386-090</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gavilyte G</ProprietaryName>
<ProprietaryNameSuffix>Tm</ProprietaryNameSuffix>
<NonProprietaryName>Polyethylene Glycol-3350 And Electrolytes</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090231</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>POLYETHYLENE GLYCOL 3350; SODIUM SULFATE ANHYDROUS; SODIUM BICARBONATE; SODIUM CHLORIDE; POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>236; 22.74; 6.74; 5.86; 2.97</StrengthNumber>
<StrengthUnit>g/274.31g; g/274.31g; g/274.31g; g/274.31g; g/274.31g</StrengthUnit>
<Pharm_Classes>Osmotic Activity [MoA],Osmotic Laxative [EPC],Stimulation Large Intestine Fluid/Electrolyte Secretion [PE],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Potassium Compounds [CS],Potassium Salt [EPC],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>GaviLyte-G is a combination of PEG 3350, an osmotic laxative, and electrolytes indicated for cleansing of the colon in preparation for colonoscopy and barium enema X-ray examination in adults (1).</IndicationAndUsage>
<Description>For oral solution: Each 4 liter (4L) GaviLyte-G jug contains a white powder for reconstitution. GaviLyte-G is a combination of polyethylene glycol 3350, an osmotic laxative, and electrolytes (sodium sulfate, sodium chloride, sodium bicarbonate and potassium chloride) for oral solution. Each 4 liter jug contains: polyethylene glycol 3350 236 g, sodium sulfate (anhydrous) 22.74 g, sodium bicarbonate 6.74 g, sodium chloride 5.86 g, potassium chloride 2.97 g. The solution is clear and colorless when reconstituted to a final volume of 4 liters with water. Polyethylene Glycol 3350, NF. Sodium Sulfate, USP. The chemical name is Na2SO4. The average Molecular Weight is 142.04. The structural formula is. Sodium Bicarbonate, USP. The chemical name is NaHCO3. The average Molecular Weight is 84.01. The structural formula is. Sodium Chloride, USP. The chemical name is NaCl. The average Molecular Weight: 58.44. The structural formula is. Na+ Cl-. Potassium Chloride, USP. The chemical name is KCl. The average Molecular Weight: 74.55. The structural formula is. K-Cl.</Description>
</NDC>
<NDC>
<NDCCode>63187-090-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (63187-090-30) </PackageDescription>
<NDC11Code>63187-0090-30</NDC11Code>
<ProductNDC>63187-090</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lovastatin</ProprietaryName>
<NonProprietaryName>Lovastatin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20021125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075991</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>LOVASTATIN</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-09-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.</IndicationAndUsage>
<Description>Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S -[1α(R *), 3α, 7β, 8β(2 S *,4 S *),8aβ]]-1,2,3, 7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H -pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24 H 36 O 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, pregelatinized cornstarch, sodium starch glycolate, butylated hydroxyaniso and talc. Butylated hydroxyanisole (BHA) is added as a preservative.</Description>
</NDC>
<NDC>
<NDCCode>63187-090-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (63187-090-60) </PackageDescription>
<NDC11Code>63187-0090-60</NDC11Code>
<ProductNDC>63187-090</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lovastatin</ProprietaryName>
<NonProprietaryName>Lovastatin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20021125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075991</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>LOVASTATIN</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-09-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.</IndicationAndUsage>
<Description>Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S -[1α(R *), 3α, 7β, 8β(2 S *,4 S *),8aβ]]-1,2,3, 7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H -pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24 H 36 O 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, pregelatinized cornstarch, sodium starch glycolate, butylated hydroxyaniso and talc. Butylated hydroxyanisole (BHA) is added as a preservative.</Description>
</NDC>
<NDC>
<NDCCode>63187-090-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (63187-090-90) </PackageDescription>
<NDC11Code>63187-0090-90</NDC11Code>
<ProductNDC>63187-090</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lovastatin</ProprietaryName>
<NonProprietaryName>Lovastatin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20021125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075991</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>LOVASTATIN</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-09-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.</IndicationAndUsage>
<Description>Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S -[1α(R *), 3α, 7β, 8β(2 S *,4 S *),8aβ]]-1,2,3, 7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H -pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24 H 36 O 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, pregelatinized cornstarch, sodium starch glycolate, butylated hydroxyaniso and talc. Butylated hydroxyanisole (BHA) is added as a preservative.</Description>
</NDC>
<NDC>
<NDCCode>63304-090-01</NDCCode>
<PackageDescription>100 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (63304-090-01) </PackageDescription>
<NDC11Code>63304-0090-01</NDC11Code>
<ProductNDC>63304-090</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride</ProprietaryName>
<NonProprietaryName>Potassium Chloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208864</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium chloride extended-release capsules are indicated for the treatment and prophylaxis of hypokalemia in adults and children with or without metabolic alkalosis, in patients for whom dietary management with potassium-rich foods or diuretic dose reduction is insufficient.</IndicationAndUsage>
<Description>Potassium chloride extended-release capsules, USP, are an oral dosage form of microencapsulated potassium chloride containing 600 mg and 750 mg of potassium chloride, USP, equivalent to 8 mEq and 10 mEq of potassium, respectively. The chemical name of the active ingredient is potassium chloride and the structural formula is KCl. It has a molecular mass of 74.55. Potassium chloride, USP, occurs as a white granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Inactive ingredients: ethylcellulose, gelatin, magnesium stearate, sodium lauryl sulfate, titanium dioxide and edible black ink. The 10 mEq capsules also contain black iron oxide, FD&C blue No.1 and FD&C red No.3.</Description>
</NDC>
</NDCList>