RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>76125-792-20</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (76125-792-20)  &gt; 20 mL in 1 VIAL (76125-792-21) </PackageDescription>
    <NDC11Code>76125-0792-20</NDC11Code>
    <ProductNDC>76125-792</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Albuked</ProprietaryName>
    <NonProprietaryName>Albumin (human)</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19421021</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101138</ApplicationNumber>
    <LabelerName>KEDRION BIOPHARMA, INC.</LabelerName>
    <SubstanceName>ALBUMIN HUMAN</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>g/20mL</StrengthUnit>
    <Pharm_Classes>Human Serum Albumin [EPC], Increased Intravascular Volume [PE], Increased Oncotic Pressure [PE], Osmotic Activity [MoA], Serum Albumin [Chemical/Ingredient]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2020-08-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19421021</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Emergency Treatment of Hypovolemic Shock. Albuked 25 is hyperoncotic and on intravenous infusion will expand the plasma volume by an additional amount, three to four times the volume actually administered, by withdrawing fluid from the interstitial spaces, provided the patient is normally hydrated interstitially or there is interstitial edema.(1) If the patient is dehydrated, additional crystalloids must be given,(4) or alternatively, Albumin (Human) 5%, USP (Albuked 5) should be used. The patient’s hemodynamic response should be monitored and the usual precautions against circulatory overload observed. The total dose should not exceed the level of albumin found in the normal individual, i.e., about 2 g per kg body weight in the absence of active bleeding. Although Albuked 5 is to be preferred for the usual volume deficits, Albuked 25 with appropriate crystalloids may offer therapeutic advantages in oncotic deficits or in long-standing shock where treatment has been delayed.(2). Removal of ascitic fluid from a patient with cirrhosis may cause changes in cardiovascular function and even result in hypovolemic shock. In such circumstances, the use of an albumin infusion may be required to support the blood volume.(2). Burn Therapy. An optimal therapeutic regimen with respect to the administration of colloids, crystalloids, and water following extensive burns has not been established. During the first 24 hours after sustaining thermal injury, large volumes of crystalloids are infused to restore the depleted extracellular fluid volume. Beyond 24 hours Albuked 25 can be used to maintain plasma colloid osmotic pressure. Hypoproteinemia With or Without Edema. During major surgery, patients can lose over half of their circulating albumin with the attendant complications of oncotic deficit.(2,4,5) A similar situation can occur in sepsis or intensive care patients. Treatment with Albuked 25 may be of value in such cases.(2). Adult Respiratory Distress Syndrome (ARDS)(2,5). This is characterized by deficient oxygenation caused by pulmonary interstitial edema complicating shock and postsurgical conditions. When clinical signs are those of hypoproteinemia with a fluid volume overload, Albuked 25 together with a diuretic may play a role in therapy. Cardiopulmonary Bypass(2,6). With the relatively small priming volume required with modern pumps, preoperative dilution of the blood using albumin and crystalloid has been shown to be safe and well-tolerated. Although the limit to which the hematocrit and plasma protein concentration can be safely lowered has not been defined, it is common practice to adjust the albumin and crystalloid pump prime to achieve a hematocrit of 20% and a plasma albumin concentration of 2.5 g per 100 mL in the patient. Acute Liver Failure (2). In the uncommon situation of rapid loss of liver function with or without coma, administration of albumin may serve the double purpose of supporting the colloid osmotic pressure of the plasma as well as binding excess plasma bilirubin. Neonatal Hemolytic Disease(2,3). The administration of Albuked 25 may be indicated prior to exchange transfusion, in order to bind free bilirubin, thus lessening the risk of kernicterus. A dosage of 1 g /kg body weight is given about 1 hour prior to exchange transfusion. Caution must be observed in hypervolemic infants. Sequestration of Protein Rich Fluids(7). This occurs in such conditions as acute peritonitis, pancreatitis, mediastinitis, and extensive cellulitis. The magnitude of loss into the third space may require treatment of reduced volume or oncotic activity with an infusion of albumin. Erythrocyte Resuspension(2). Albumin may be required to avoid excessive hypoproteinemia, during certain types of exchange transfusion, or with the use of very large volumes of previously frozen or washed red cells. About 25 g of albumin per liter of erythrocytes is commonly used, although the requirements in preexistent hypoproteinemia or hepatic impairment can be greater. Albuked 25 is added to the isotonic suspension of washed red cells immediately prior to transfusion. Acute Nephrosis(2). Certain patients may not respond to cyclophosphamide or steroid therapy. The steroids may even aggravate the underlying edema. In this situation a loop diuretic and 100 mL Albuked 25 repeated daily for 7 to 10 days may be helpful in controlling the edema and the patient may then respond to steroid treatment. Renal Dialysis(2). Although not part of the regular regimen of renal dialysis, Albuked 25 may be of value in the treatment of shock or hypotension in these patients. The usual volume administered is about 100 mL, taking particular care to avoid fluid overload as these patients are often fluid overloaded and cannot tolerate substantial volumes of salt solution. Situations in Which Albumin Administration is Not Warranted(2). In chronic nephrosis, infused albumin is promptly excreted by the kidneys with no relief of the chronic edema or effect on the underlying renal lesion. It is of occasional use in the rapid “priming” diuresis of nephrosis. Similarly, in hypoproteinemic states associated with chronic cirrhosis, malabsorption, protein losing enteropathies, pancreatic insufficiency, and undernutrition, the infusion of albumin as a source of protein nutrition is not justified.</IndicationAndUsage>
    <Description>Albumin (Human) 25%, USP (Albuked 25) is made from large pools of human venous plasma by the Cohn cold ethanol fractionation process. Part of the fractionation may be performed by another licensed manufacturer. It is prepared in accordance with the applicable requirements established by the U.S. Food and Drug Administration. Albuked 25 is a 25% sterile solution of albumin in an aqueous diluent. The preparation is stabilized with 0.02 M sodium caprylate and 0.02 M acetyltryptophan. The aluminum content of the product is not more than 200 µg/L. The approximate sodium content of the product is 145 mEq/L. Albuked 25 is clear, slightly viscous, almost colorless to yellow, amber or green. It contains no preservative. Albuked 25 must be administered intravenously. Each vial of Albuked 25 is heat-treated at 60°C for 10 hours against the possibility of transmitting the hepatitis viruses. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents.(11-14) The production steps from Pooled Plasma to Effluent IV-1 in the Albuked 25 manufacturing process have been shown to decrease TSE infectivity of that experimental model agent (a total of ≥7.0 logs). These studies provide reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed.</Description>
  </NDC>
  <NDC>
    <NDCCode>76125-792-10</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (76125-792-10)  &gt; 100 mL in 1 VIAL (76125-792-11) </PackageDescription>
    <NDC11Code>76125-0792-10</NDC11Code>
    <ProductNDC>76125-792</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Albuked</ProprietaryName>
    <NonProprietaryName>Albumin (human)</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19421021</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101138</ApplicationNumber>
    <LabelerName>KEDRION BIOPHARMA, INC.</LabelerName>
    <SubstanceName>ALBUMIN HUMAN</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>g/20mL</StrengthUnit>
    <Pharm_Classes>Human Serum Albumin [EPC], Increased Intravascular Volume [PE], Increased Oncotic Pressure [PE], Osmotic Activity [MoA], Serum Albumin [Chemical/Ingredient]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2020-08-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19421021</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Emergency Treatment of Hypovolemic Shock. Albuked 25 is hyperoncotic and on intravenous infusion will expand the plasma volume by an additional amount, three to four times the volume actually administered, by withdrawing fluid from the interstitial spaces, provided the patient is normally hydrated interstitially or there is interstitial edema.(1) If the patient is dehydrated, additional crystalloids must be given,(4) or alternatively, Albumin (Human) 5%, USP (Albuked 5) should be used. The patient’s hemodynamic response should be monitored and the usual precautions against circulatory overload observed. The total dose should not exceed the level of albumin found in the normal individual, i.e., about 2 g per kg body weight in the absence of active bleeding. Although Albuked 5 is to be preferred for the usual volume deficits, Albuked 25 with appropriate crystalloids may offer therapeutic advantages in oncotic deficits or in long-standing shock where treatment has been delayed.(2). Removal of ascitic fluid from a patient with cirrhosis may cause changes in cardiovascular function and even result in hypovolemic shock. In such circumstances, the use of an albumin infusion may be required to support the blood volume.(2). Burn Therapy. An optimal therapeutic regimen with respect to the administration of colloids, crystalloids, and water following extensive burns has not been established. During the first 24 hours after sustaining thermal injury, large volumes of crystalloids are infused to restore the depleted extracellular fluid volume. Beyond 24 hours Albuked 25 can be used to maintain plasma colloid osmotic pressure. Hypoproteinemia With or Without Edema. During major surgery, patients can lose over half of their circulating albumin with the attendant complications of oncotic deficit.(2,4,5) A similar situation can occur in sepsis or intensive care patients. Treatment with Albuked 25 may be of value in such cases.(2). Adult Respiratory Distress Syndrome (ARDS)(2,5). This is characterized by deficient oxygenation caused by pulmonary interstitial edema complicating shock and postsurgical conditions. When clinical signs are those of hypoproteinemia with a fluid volume overload, Albuked 25 together with a diuretic may play a role in therapy. Cardiopulmonary Bypass(2,6). With the relatively small priming volume required with modern pumps, preoperative dilution of the blood using albumin and crystalloid has been shown to be safe and well-tolerated. Although the limit to which the hematocrit and plasma protein concentration can be safely lowered has not been defined, it is common practice to adjust the albumin and crystalloid pump prime to achieve a hematocrit of 20% and a plasma albumin concentration of 2.5 g per 100 mL in the patient. Acute Liver Failure (2). In the uncommon situation of rapid loss of liver function with or without coma, administration of albumin may serve the double purpose of supporting the colloid osmotic pressure of the plasma as well as binding excess plasma bilirubin. Neonatal Hemolytic Disease(2,3). The administration of Albuked 25 may be indicated prior to exchange transfusion, in order to bind free bilirubin, thus lessening the risk of kernicterus. A dosage of 1 g /kg body weight is given about 1 hour prior to exchange transfusion. Caution must be observed in hypervolemic infants. Sequestration of Protein Rich Fluids(7). This occurs in such conditions as acute peritonitis, pancreatitis, mediastinitis, and extensive cellulitis. The magnitude of loss into the third space may require treatment of reduced volume or oncotic activity with an infusion of albumin. Erythrocyte Resuspension(2). Albumin may be required to avoid excessive hypoproteinemia, during certain types of exchange transfusion, or with the use of very large volumes of previously frozen or washed red cells. About 25 g of albumin per liter of erythrocytes is commonly used, although the requirements in preexistent hypoproteinemia or hepatic impairment can be greater. Albuked 25 is added to the isotonic suspension of washed red cells immediately prior to transfusion. Acute Nephrosis(2). Certain patients may not respond to cyclophosphamide or steroid therapy. The steroids may even aggravate the underlying edema. In this situation a loop diuretic and 100 mL Albuked 25 repeated daily for 7 to 10 days may be helpful in controlling the edema and the patient may then respond to steroid treatment. Renal Dialysis(2). Although not part of the regular regimen of renal dialysis, Albuked 25 may be of value in the treatment of shock or hypotension in these patients. The usual volume administered is about 100 mL, taking particular care to avoid fluid overload as these patients are often fluid overloaded and cannot tolerate substantial volumes of salt solution. Situations in Which Albumin Administration is Not Warranted(2). In chronic nephrosis, infused albumin is promptly excreted by the kidneys with no relief of the chronic edema or effect on the underlying renal lesion. It is of occasional use in the rapid “priming” diuresis of nephrosis. Similarly, in hypoproteinemic states associated with chronic cirrhosis, malabsorption, protein losing enteropathies, pancreatic insufficiency, and undernutrition, the infusion of albumin as a source of protein nutrition is not justified.</IndicationAndUsage>
    <Description>Albumin (Human) 25%, USP (Albuked 25) is made from large pools of human venous plasma by the Cohn cold ethanol fractionation process. Part of the fractionation may be performed by another licensed manufacturer. It is prepared in accordance with the applicable requirements established by the U.S. Food and Drug Administration. Albuked 25 is a 25% sterile solution of albumin in an aqueous diluent. The preparation is stabilized with 0.02 M sodium caprylate and 0.02 M acetyltryptophan. The aluminum content of the product is not more than 200 µg/L. The approximate sodium content of the product is 145 mEq/L. Albuked 25 is clear, slightly viscous, almost colorless to yellow, amber or green. It contains no preservative. Albuked 25 must be administered intravenously. Each vial of Albuked 25 is heat-treated at 60°C for 10 hours against the possibility of transmitting the hepatitis viruses. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents.(11-14) The production steps from Pooled Plasma to Effluent IV-1 in the Albuked 25 manufacturing process have been shown to decrease TSE infectivity of that experimental model agent (a total of ≥7.0 logs). These studies provide reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed.</Description>
  </NDC>
  <NDC>
    <NDCCode>76125-792-25</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (76125-792-25)  &gt; 50 mL in 1 VIAL (76125-792-26) </PackageDescription>
    <NDC11Code>76125-0792-25</NDC11Code>
    <ProductNDC>76125-792</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Albuked</ProprietaryName>
    <NonProprietaryName>Albumin (human)</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19421021</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101138</ApplicationNumber>
    <LabelerName>KEDRION BIOPHARMA, INC.</LabelerName>
    <SubstanceName>ALBUMIN HUMAN</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>g/20mL</StrengthUnit>
    <Pharm_Classes>Human Serum Albumin [EPC], Increased Intravascular Volume [PE], Increased Oncotic Pressure [PE], Osmotic Activity [MoA], Serum Albumin [Chemical/Ingredient]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2020-08-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19421021</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Emergency Treatment of Hypovolemic Shock. Albuked 25 is hyperoncotic and on intravenous infusion will expand the plasma volume by an additional amount, three to four times the volume actually administered, by withdrawing fluid from the interstitial spaces, provided the patient is normally hydrated interstitially or there is interstitial edema.(1) If the patient is dehydrated, additional crystalloids must be given,(4) or alternatively, Albumin (Human) 5%, USP (Albuked 5) should be used. The patient’s hemodynamic response should be monitored and the usual precautions against circulatory overload observed. The total dose should not exceed the level of albumin found in the normal individual, i.e., about 2 g per kg body weight in the absence of active bleeding. Although Albuked 5 is to be preferred for the usual volume deficits, Albuked 25 with appropriate crystalloids may offer therapeutic advantages in oncotic deficits or in long-standing shock where treatment has been delayed.(2). Removal of ascitic fluid from a patient with cirrhosis may cause changes in cardiovascular function and even result in hypovolemic shock. In such circumstances, the use of an albumin infusion may be required to support the blood volume.(2). Burn Therapy. An optimal therapeutic regimen with respect to the administration of colloids, crystalloids, and water following extensive burns has not been established. During the first 24 hours after sustaining thermal injury, large volumes of crystalloids are infused to restore the depleted extracellular fluid volume. Beyond 24 hours Albuked 25 can be used to maintain plasma colloid osmotic pressure. Hypoproteinemia With or Without Edema. During major surgery, patients can lose over half of their circulating albumin with the attendant complications of oncotic deficit.(2,4,5) A similar situation can occur in sepsis or intensive care patients. Treatment with Albuked 25 may be of value in such cases.(2). Adult Respiratory Distress Syndrome (ARDS)(2,5). This is characterized by deficient oxygenation caused by pulmonary interstitial edema complicating shock and postsurgical conditions. When clinical signs are those of hypoproteinemia with a fluid volume overload, Albuked 25 together with a diuretic may play a role in therapy. Cardiopulmonary Bypass(2,6). With the relatively small priming volume required with modern pumps, preoperative dilution of the blood using albumin and crystalloid has been shown to be safe and well-tolerated. Although the limit to which the hematocrit and plasma protein concentration can be safely lowered has not been defined, it is common practice to adjust the albumin and crystalloid pump prime to achieve a hematocrit of 20% and a plasma albumin concentration of 2.5 g per 100 mL in the patient. Acute Liver Failure (2). In the uncommon situation of rapid loss of liver function with or without coma, administration of albumin may serve the double purpose of supporting the colloid osmotic pressure of the plasma as well as binding excess plasma bilirubin. Neonatal Hemolytic Disease(2,3). The administration of Albuked 25 may be indicated prior to exchange transfusion, in order to bind free bilirubin, thus lessening the risk of kernicterus. A dosage of 1 g /kg body weight is given about 1 hour prior to exchange transfusion. Caution must be observed in hypervolemic infants. Sequestration of Protein Rich Fluids(7). This occurs in such conditions as acute peritonitis, pancreatitis, mediastinitis, and extensive cellulitis. The magnitude of loss into the third space may require treatment of reduced volume or oncotic activity with an infusion of albumin. Erythrocyte Resuspension(2). Albumin may be required to avoid excessive hypoproteinemia, during certain types of exchange transfusion, or with the use of very large volumes of previously frozen or washed red cells. About 25 g of albumin per liter of erythrocytes is commonly used, although the requirements in preexistent hypoproteinemia or hepatic impairment can be greater. Albuked 25 is added to the isotonic suspension of washed red cells immediately prior to transfusion. Acute Nephrosis(2). Certain patients may not respond to cyclophosphamide or steroid therapy. The steroids may even aggravate the underlying edema. In this situation a loop diuretic and 100 mL Albuked 25 repeated daily for 7 to 10 days may be helpful in controlling the edema and the patient may then respond to steroid treatment. Renal Dialysis(2). Although not part of the regular regimen of renal dialysis, Albuked 25 may be of value in the treatment of shock or hypotension in these patients. The usual volume administered is about 100 mL, taking particular care to avoid fluid overload as these patients are often fluid overloaded and cannot tolerate substantial volumes of salt solution. Situations in Which Albumin Administration is Not Warranted(2). In chronic nephrosis, infused albumin is promptly excreted by the kidneys with no relief of the chronic edema or effect on the underlying renal lesion. It is of occasional use in the rapid “priming” diuresis of nephrosis. Similarly, in hypoproteinemic states associated with chronic cirrhosis, malabsorption, protein losing enteropathies, pancreatic insufficiency, and undernutrition, the infusion of albumin as a source of protein nutrition is not justified.</IndicationAndUsage>
    <Description>Albumin (Human) 25%, USP (Albuked 25) is made from large pools of human venous plasma by the Cohn cold ethanol fractionation process. Part of the fractionation may be performed by another licensed manufacturer. It is prepared in accordance with the applicable requirements established by the U.S. Food and Drug Administration. Albuked 25 is a 25% sterile solution of albumin in an aqueous diluent. The preparation is stabilized with 0.02 M sodium caprylate and 0.02 M acetyltryptophan. The aluminum content of the product is not more than 200 µg/L. The approximate sodium content of the product is 145 mEq/L. Albuked 25 is clear, slightly viscous, almost colorless to yellow, amber or green. It contains no preservative. Albuked 25 must be administered intravenously. Each vial of Albuked 25 is heat-treated at 60°C for 10 hours against the possibility of transmitting the hepatitis viruses. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents.(11-14) The production steps from Pooled Plasma to Effluent IV-1 in the Albuked 25 manufacturing process have been shown to decrease TSE infectivity of that experimental model agent (a total of ≥7.0 logs). These studies provide reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed.</Description>
  </NDC>
  <NDC>
    <NDCCode>49035-792-01</NDCCode>
    <PackageDescription>20 BLISTER PACK in 1 CARTON (49035-792-01)  / 1 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>49035-0792-01</NDC11Code>
    <ProductNDC>49035-792</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Equate Sinus And Cold D</ProprietaryName>
    <NonProprietaryName>Naproxen Sodium, Pseudoephedrine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200724</StartMarketingDate>
    <EndMarketingDate>20250531</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076518</ApplicationNumber>
    <LabelerName>Wal-Mart Stores Inc</LabelerName>
    <SubstanceName>NAPROXEN SODIUM; PSEUDOEPHEDRINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>220; 120</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha-Agonists [MoA], Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-06-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20200724</StartMarketingDatePackage>
    <EndMarketingDatePackage>20250531</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>temporarily relieves these cold, sinus, and flu symptoms: 1 sinus pressure, 2 minor body aches and pains, 3 headache, 4 nasal and sinus congestion (promotes sinus drainage and restores freer breathing through the nose), 5 fever.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>51655-792-20</NDCCode>
    <PackageDescription>20 TABLET in 1 BOTTLE, PLASTIC (51655-792-20) </PackageDescription>
    <NDC11Code>51655-0792-20</NDC11Code>
    <ProductNDC>51655-792</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Metaxalone</ProprietaryName>
    <NonProprietaryName>Metaxalone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220120</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204770</ApplicationNumber>
    <LabelerName>Northwind Health Company, LLC</LabelerName>
    <SubstanceName>METAXALONE</SubstanceName>
    <StrengthNumber>800</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220120</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Metaxalone is indicated as an adjunct to rest, physical therapy, and other measures for the relief of discomfort associated with acute, painful musculoskeletal conditions in adults and pediatric patients 13 years of age and older.</IndicationAndUsage>
    <Description>Metaxalone Tablets, USP contain 800 mg of metaxalone and the following inactive ingredients: carboxymethylcellulose sodium, alginic acid, stearic acid, hydrogenated castor oil, magnesium stearate, colloidal silicon dioxide, sodium lauryl sulfate, and FD&amp;C Red #40 Aluminum Lake. Metaxalone is a muscle relaxant for oral administration. Chemically, metaxalone is 5-[(3,5- dimethylphenoxy) methyl]-2-oxazolidinone. The empirical formula is C 12H 15NO 3, which corresponds to a molecular weight of 221.25. The structural formula is:. Metaxalone is a white to almost white, odorless crystalline powder freely soluble in chloroform, soluble in methanol and in 96% ethanol, but practically insoluble in ether or water.</Description>
  </NDC>
  <NDC>
    <NDCCode>63868-792-20</NDCCode>
    <PackageDescription>2 BLISTER PACK in 1 CARTON (63868-792-20)  &gt; 10 TABLET, COATED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>63868-0792-20</NDC11Code>
    <ProductNDC>63868-792</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Severe Allergy Relief Plus Sinus Headache</ProprietaryName>
    <NonProprietaryName>Acetaminophen, Diphenhydramine Hydrochloride, And Phenylephrine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20120222</StartMarketingDate>
    <EndMarketingDate>20230831</EndMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
    <ApplicationNumber>part341</ApplicationNumber>
    <LabelerName>Chain Drug Marketing Association</LabelerName>
    <SubstanceName>ACETAMINOPHEN; DIPHENHYDRAMINE HYDROCHLORIDE; PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>325; 25; 5</StrengthNumber>
    <StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha1-Agonists [MoA], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], alpha-1 Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2023-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20120222</StartMarketingDatePackage>
    <EndMarketingDatePackage>20230831</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>76125-250-20</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (76125-250-20)  *  5 mL in 1 VIAL, GLASS (76125-252-21)  *  5 mL in 1 VIAL, GLASS (13533-000-04) </PackageDescription>
    <NDC11Code>76125-0250-20</NDC11Code>
    <ProductNDC>76125-250</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Koate</ProprietaryName>
    <NonProprietaryName>Antihemophilic Factor (human)</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>19990520</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101130</ApplicationNumber>
    <LabelerName>KEDRION BIOPHARMA, INC.</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2023-12-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19990520</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>KOĀTE® is a human plasma-derived antihemophilic factor indicated for the control and prevention of bleeding episodes or in order to perform emergency and elective surgery in patients with hemophilia A (hereditary Factor VIII deficiency). Limitation of Use. KOĀTE is not indicated for the treatment of von Willebrand disease.</IndicationAndUsage>
    <Description>KOĀTE, Antihemophilic Factor (Human), is a sterile, stable, dried concentrate of human antihemophilic factor  in lyophilized powder form for reconstitution for intravenous injection.  The product is supplied in single-use vials containing nominally 250, 500, or 1,000 international units (IU or units). Each vial of KOĀTE is labeled with the actual amount of Factor VIII expressed in IU. One IU is defined by the current World Health Organization International Standard for Factor VIII concentrate, which can be traced to the level of Factor VIII found in 1 mL of fresh pooled human plasma. The final product when reconstituted as directed contains not more than (NMT) 1500 μg/mL polyethylene glycol (PEG), NMT 0.05 M glycine, NMT 25 μg/mL polysorbate 80, NMT 5 μg/g tri-n-butyl phosphate (TNBP), NMT 3 mM calcium, NMT 1 μg/mL aluminum, NMT 0.06 M histidine, and NMT 10 mg/mL human albumin. KOĀTE is purified from the cold insoluble fraction of pooled human plasma; the manufacturing process includes solvent/detergent (TNBP and polysorbate 80) treatment and heat treatment of the lyophilized final container. A gel permeation chromatography step serves the dual purpose of reducing the amount of TNBP and polysorbate 80 as well as increasing the purity of the Factor VIII in KOĀTE to 300 to 1,000 times over whole plasma. When reconstituted as directed, KOĀTE contains approximately 50 to 150 times as much Factor VIII as an equal volume of fresh plasma. The specific activity after addition of human albumin is in the range of 9 to 22 units/mg protein. KOĀTE also contains naturally occurring von Willebrand factor, which is co-purified as part of the manufacturing process. The KOĀTE manufacturing process includes two dedicated steps with virus inactivation capacity. The solvent/detergent treatment step has the capacity to inactivate enveloped viruses (such as HIV, HCV, HBV, and WNV). Heat treatment at 80ºC for 72 hours has the capacity to inactivate enveloped viruses (such as HIV and HCV) as well as non‑enveloped viruses (such as HAV and B19V). The polyethylene glycol (PEG) precipitation/depth filtration step has the capacity to remove both enveloped and non‑enveloped viruses. The accumulated virus reduction factors for KOĀTE manufacturing process are presented in Table 2. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents. The manufacturing process has been shown to decrease TSE infectivity of that experimental model agent (a total of 5.1 log10 reduction), providing reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed.</Description>
  </NDC>
  <NDC>
    <NDCCode>76125-256-20</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (76125-256-20)  *  5 mL in 1 VIAL, GLASS (76125-252-21)  *  5 mL in 1 VIAL, GLASS (13533-000-04) </PackageDescription>
    <NDC11Code>76125-0256-20</NDC11Code>
    <ProductNDC>76125-256</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Koate</ProprietaryName>
    <NonProprietaryName>Antihemophilic Factor (human)</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19990520</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101130</ApplicationNumber>
    <LabelerName>KEDRION BIOPHARMA, INC.</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2023-12-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19990520</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>KOĀTE® is a human plasma-derived antihemophilic factor indicated for the control and prevention of bleeding episodes or in order to perform emergency and elective surgery in patients with hemophilia A (hereditary Factor VIII deficiency). Limitation of Use. KOĀTE is not indicated for the treatment of von Willebrand disease.</IndicationAndUsage>
    <Description>KOĀTE, Antihemophilic Factor (Human), is a sterile, stable, dried concentrate of human antihemophilic factor  in lyophilized powder form for reconstitution for intravenous injection.  The product is supplied in single-use vials containing nominally 250, 500, or 1,000 international units (IU or units). Each vial of KOĀTE is labeled with the actual amount of Factor VIII expressed in IU. One IU is defined by the current World Health Organization International Standard for Factor VIII concentrate, which can be traced to the level of Factor VIII found in 1 mL of fresh pooled human plasma. The final product when reconstituted as directed contains not more than (NMT) 1500 μg/mL polyethylene glycol (PEG), NMT 0.05 M glycine, NMT 25 μg/mL polysorbate 80, NMT 5 μg/g tri-n-butyl phosphate (TNBP), NMT 3 mM calcium, NMT 1 μg/mL aluminum, NMT 0.06 M histidine, and NMT 10 mg/mL human albumin. KOĀTE is purified from the cold insoluble fraction of pooled human plasma; the manufacturing process includes solvent/detergent (TNBP and polysorbate 80) treatment and heat treatment of the lyophilized final container. A gel permeation chromatography step serves the dual purpose of reducing the amount of TNBP and polysorbate 80 as well as increasing the purity of the Factor VIII in KOĀTE to 300 to 1,000 times over whole plasma. When reconstituted as directed, KOĀTE contains approximately 50 to 150 times as much Factor VIII as an equal volume of fresh plasma. The specific activity after addition of human albumin is in the range of 9 to 22 units/mg protein. KOĀTE also contains naturally occurring von Willebrand factor, which is co-purified as part of the manufacturing process. The KOĀTE manufacturing process includes two dedicated steps with virus inactivation capacity. The solvent/detergent treatment step has the capacity to inactivate enveloped viruses (such as HIV, HCV, HBV, and WNV). Heat treatment at 80ºC for 72 hours has the capacity to inactivate enveloped viruses (such as HIV and HCV) as well as non‑enveloped viruses (such as HAV and B19V). The polyethylene glycol (PEG) precipitation/depth filtration step has the capacity to remove both enveloped and non‑enveloped viruses. The accumulated virus reduction factors for KOĀTE manufacturing process are presented in Table 2. Additionally, the KOĀTE manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents. The manufacturing process has been shown to decrease TSE infectivity of that experimental model agent (a total of 5.1 log10 reduction), providing reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed.</Description>
  </NDC>
  <NDC>
    <NDCCode>76125-784-20</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (76125-784-20)  &gt; 20 mL in 1 VIAL (76125-784-21) </PackageDescription>
    <NDC11Code>76125-0784-20</NDC11Code>
    <ProductNDC>76125-784</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Albuked</ProprietaryName>
    <NonProprietaryName>Albumin (human)</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19421021</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101138</ApplicationNumber>
    <LabelerName>KEDRION BIOPHARMA, INC.</LabelerName>
    <SubstanceName>ALBUMIN HUMAN</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>g/20mL</StrengthUnit>
    <Pharm_Classes>Human Serum Albumin [EPC],Increased Intravascular Volume [PE],Increased Oncotic Pressure [PE],Osmotic Activity [MoA],Serum Albumin [Chemical/Ingredient]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-12-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19421021</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>76125-900-20</NDCCode>
    <PackageDescription>1 VIAL, GLASS in 1 CARTON (76125-900-20)  &gt; 200 mL in 1 VIAL, GLASS (76125-900-21) </PackageDescription>
    <NDC11Code>76125-0900-20</NDC11Code>
    <ProductNDC>76125-900</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Gammaked</ProprietaryName>
    <NonProprietaryName>Immune Globulin (human)</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20101013</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125046</ApplicationNumber>
    <LabelerName>KEDRION BIOPHARMA, INC.</LabelerName>
    <SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>g/100mL</StrengthUnit>
    <Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-07-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101013</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>GAMMAKED is an immune globulin injection (human) 10% liquid that is indicated for the treatment of:.</IndicationAndUsage>
    <Description>GAMMAKED is a ready-to-use sterile, non-pyrogenic solution of human immune globulin protein for intravenous and subcutaneous (PI indication only) administration. GAMMAKED is clear to opalescent, and colorless to pale yellow. GAMMAKED consists of 9%–11% protein in 0.16–0.24 M glycine. Not less than 98% of the protein has the electrophoretic mobility of gamma globulin. The main component of GAMMAKED is IgG (≥ 98%) with a sub-class distribution of IgG1, IgG2, IgG3 and IgG4 of approximately 62.8%, 29.7%, 4.8% and 2.7% respectively. The distribution of IgG subclasses is similar to that found in normal serum. GAMMAKED contains trace levels of fragments, IgA (average 0.046 mg/mL), and IgM. GAMMAKED doses of 1 g/kg correspond to a glycine dose of 0.15 g/kg. While toxic effects of glycine administration have been reported, the doses and rates of administration were 3–4 fold greater than those for GAMMAKED. In another study it was demonstrated that intravenous bolus doses of 0.44 g/kg glycine were not associated with serious adverse effects.(21) Caprylate is a saturated medium-chain (C8) fatty acid of plant origin. Medium chain fatty acids are considered to be essentially non-toxic. Human subjects receiving medium chain fatty acids parenterally have tolerated doses of 3.0 to 9.0 g/kg/day for periods of several months without adverse effects.(22) Residual caprylate concentrations in the final container are no more than 0.216 g/L (1.3 mmol/L). The measured buffer capacity is 35 mEq/L (0.35 mEq/g protein) and the osmolality is 258 mOsmol/kg solvent, which is close to physiological osmolality (285-295 mOsmol/kg). A dose of 1 g/kg body weight therefore represents an acid load of 0.35 mEq/kg body weight. The total buffering capacity of whole blood in a normal individual is 45–50 mEq/L of blood, or 3.6 mEq/kg body weight. Thus, the acid load delivered with a dose of 1 g/kg of GAMMAKED would be neutralized by the buffering capacity of whole blood alone, even if the dose was infused instantaneously. The pH of GAMMAKED is 4.0–4.5. GAMMAKED contains no preservative. GAMMAKED is not made with natural rubber latex. GAMMAKED is made from large pools of human plasma by a combination of cold ethanol fractionation, caprylate precipitation and filtration, and anion-exchange chromatography. Isotonicity is achieved by the addition of glycine. GAMMAKED is incubated in the final container (at the low pH of 4.0–4.3). The product is intended for intravenous administration and may be administered subcutaneously in treatment of PI. The capacity of the manufacturing process to remove and/or inactivate enveloped and non-enveloped viruses has been validated by laboratory spiking studies on a scaled down process model, using the following enveloped and non-enveloped viruses: human immunodeficiency virus, type I (HIV-1) as the relevant virus for HIV-1 and HIV–2; bovine viral diarrhea virus (BVDV) as a model for hepatitis C virus; pseudorabies virus (PRV) as a model for large enveloped DNA viruses (e.g., herpes viruses); Reovirus type 3 (Reo) as a model for non-enveloped viruses and for its resistance to physical and chemical inactivation; hepatitis A virus (HAV) as relevant non-enveloped virus, and porcine parvovirus (PPV) as a model for human parvovirus B19.(23). Overall virus reduction was calculated only from steps that were mechanistically independent from each other and truly additive. In addition, each step was verified to provide robust virus reduction across the production range for key operating parameters. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents.(23). Several of the individual production steps in the GAMMAKED manufacturing process have been shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include two depth filtrations (in sequence, a total of ≥ 6.6 log10).  These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed.</Description>
  </NDC>
  <NDC>
    <NDCCode>76125-791-10</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (76125-791-10)  &gt; 100 mL in 1 VIAL (76125-791-11) </PackageDescription>
    <NDC11Code>76125-0791-10</NDC11Code>
    <ProductNDC>76125-791</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Albuked</ProprietaryName>
    <NonProprietaryName>Albumin (human)</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19810728</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101138</ApplicationNumber>
    <LabelerName>KEDRION BIOPHARMA, INC.</LabelerName>
    <SubstanceName>ALBUMIN HUMAN</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>g/50mL</StrengthUnit>
    <Pharm_Classes>Human Serum Albumin [EPC], Increased Intravascular Volume [PE], Increased Oncotic Pressure [PE], Osmotic Activity [MoA], Serum Albumin [Chemical/Ingredient]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2020-08-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19810728</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Emergency Treatment of Hypovolemic Shock. Albuked 20 is hyperoncotic and on intravenous infusion will expand the plasma volume by an additional amount, three to four times the volume actually administered, by withdrawing fluid from the interstitial spaces, provided the patient is normally hydrated interstitially or there is interstitial edema.(1) If the patient is dehydrated, additional crystalloids must be given,(4) or alternatively, Albumin (Human) 5%, USP (Albuked 5) should be used. The patient’s hemodynamic response should be monitored and the usual precautions against circulatory overload observed. The total dose should not exceed the level of albumin found in the normal individual; i.e., about 2 g per kg body weight in the absence of active bleeding. Although Albuked 5 is to be preferred for the usual volume deficits, Albuked 20 with appropriate crystalloids may offer therapeutic advantages in oncotic deficits or in long-standing shock where treatment has been delayed.(2). Removal of ascitic fluid from a patient with cirrhosis may cause changes in cardiovascular function and even result in hypovolemic shock. In such circumstances, the use of an albumin infusion may be required to support the blood volume.(2). Burn Therapy. An optimal therapeutic regimen with respect to the administration of colloids, crystalloids, and water following extensive burns has not been established. During the first 24 hours after sustaining thermal injury, large volumes of crystalloids are infused to restore the depleted extracellular fluid volume. Beyond 24 hours Albuked 20 can be used to maintain plasma colloid osmotic pressure. Hypoproteinemia With or Without Edema. During major surgery, patients can lose over half of their circulating albumin with the attendant complications of oncotic deficit.(2,4,5) A similar situation can occur in sepsis or intensive care patients. Treatment with Albuked 20 may be of value in such cases.(2). Adult Respiratory Distress Syndrome (ARDS)(2,5). This is characterized by deficient oxygenation caused by pulmonary interstitial edema complicating shock and postsurgical conditions. When clinical signs are those of hypoproteinemia with a fluid volume overload, Albuked 20 together with a diuretic may play a role in therapy. Cardiopulmonary Bypass(2,6). With the relatively small priming volume required with modern pumps, preoperative dilution of the blood using albumin and crystalloid has been shown to be safe and well-tolerated. Although the limit to which the hematocrit and plasma protein concentration can be safely lowered has not been defined, it is common practice to adjust the albumin and crystalloid pump prime to achieve a hematocrit of 20% and a plasma albumin concentration of 2.5 g per 100 mL in the patient. Acute Liver Failure(2). In the uncommon situation of rapid loss of liver function with or without coma, administration of albumin may serve the double purpose of supporting the colloid osmotic pressure of the plasma as well as binding excess plasma bilirubin. Neonatal Hemolytic Disease(2,3). The administration of Albuked 20 may be indicated prior to exchange transfusion, in order to bind free bilirubin, thus lessening the risk of kernicterus. A dosage of 1 g/kg body weight is given about 1 hour prior to exchange transfusion. Caution must be observed in hypervolemic infants. Sequestration of Protein Rich Fluids(7). This occurs in such conditions as acute peritonitis, pancreatitis, mediastinitis, and extensive cellulitis. The magnitude of loss into the third space may require treatment of reduced volume or oncotic activity with an infusion of albumin. Erythrocyte Resuspension(2). Albumin may be required to avoid excessive hypoproteinemia during certain types of exchange transfusion, or with the use of very large volumes of previously frozen or washed red cells. About 25 g of albumin per liter of erythrocytes is commonly used, although the requirements in preexistent hypoproteinemia or hepatic impairment can be greater. Albuked 20 is added to the isotonic suspension of washed red cells immediately prior to transfusion. Acute Nephrosis(2). Certain patients may not respond to cyclophosphamide or steroid therapy. The steroids may even aggravate the underlying edema. In this situation a loop diuretic and 100 mL Albuked 20 repeated daily for 7 to 10 days may be helpful in controlling the edema and the patient may then respond to steroid treatment. Renal Dialysis(2). Although not part of the regular regimen of renal dialysis, Albuked 20 may be of value in the treatment of shock or hypotension in these patients. The usual volume administered is about 100 mL, taking particular care to avoid fluid overload as these patients are often fluid overloaded and cannot tolerate substantial volumes of salt solution. Situations in Which Albumin Administration is Not Warranted(2). In chronic nephrosis, infused albumin is promptly excreted by the kidneys with no relief of the chronic edema or effect on the underlying renal lesion. It is of occasional use in the rapid “priming” diuresis of nephrosis. Similarly, in hypoproteinemic states associated with chronic cirrhosis, malabsorption, protein-losing enteropathies, pancreatic insufficiency, and undernutrition, the infusion of albumin as a source of protein nutrition is not justified.</IndicationAndUsage>
    <Description>Albumin (Human) 20%, USP (Albuked 20) is made from large pools of human venous plasma by the Cohn cold ethanol fractionation process. Part of the fractionation may be performed by another licensed manufacturer. It is prepared in accordance with the applicable requirements established by the U.S. Food and Drug Administration. Albuked 20 is a 20% sterile solution of albumin in an aqueous diluent. The preparation is stabilized with 0.016 M sodium caprylate and 0.016 M acetyltryptophan. The aluminum content of the product is not more than 200 µg/L. The approximate sodium content of the product is 145 mEq/L. Albuked 20 is clear, slightly viscous, almost colorless to yellow, amber or green. It contains no preservative. Albuked 20 must be administered intravenously. Each vial of Albuked 20 is heat-treated at 60°C for 10 hours against the possibility of transmitting the hepatitis viruses. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents.(11-14) The production steps from Pooled Plasma to Effluent IV-1 in the Albuked 20 manufacturing process have been shown to decrease TSE infectivity of that experimental model agent (a total of ≥7.0 logs). These studies provide reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed.</Description>
  </NDC>
  <NDC>
    <NDCCode>76125-791-50</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (76125-791-50)  &gt; 50 mL in 1 VIAL (76125-791-51) </PackageDescription>
    <NDC11Code>76125-0791-50</NDC11Code>
    <ProductNDC>76125-791</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Albuked</ProprietaryName>
    <NonProprietaryName>Albumin (human)</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19810728</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101138</ApplicationNumber>
    <LabelerName>KEDRION BIOPHARMA, INC.</LabelerName>
    <SubstanceName>ALBUMIN HUMAN</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>g/50mL</StrengthUnit>
    <Pharm_Classes>Human Serum Albumin [EPC], Increased Intravascular Volume [PE], Increased Oncotic Pressure [PE], Osmotic Activity [MoA], Serum Albumin [Chemical/Ingredient]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2020-08-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19810728</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Emergency Treatment of Hypovolemic Shock. Albuked 20 is hyperoncotic and on intravenous infusion will expand the plasma volume by an additional amount, three to four times the volume actually administered, by withdrawing fluid from the interstitial spaces, provided the patient is normally hydrated interstitially or there is interstitial edema.(1) If the patient is dehydrated, additional crystalloids must be given,(4) or alternatively, Albumin (Human) 5%, USP (Albuked 5) should be used. The patient’s hemodynamic response should be monitored and the usual precautions against circulatory overload observed. The total dose should not exceed the level of albumin found in the normal individual; i.e., about 2 g per kg body weight in the absence of active bleeding. Although Albuked 5 is to be preferred for the usual volume deficits, Albuked 20 with appropriate crystalloids may offer therapeutic advantages in oncotic deficits or in long-standing shock where treatment has been delayed.(2). Removal of ascitic fluid from a patient with cirrhosis may cause changes in cardiovascular function and even result in hypovolemic shock. In such circumstances, the use of an albumin infusion may be required to support the blood volume.(2). Burn Therapy. An optimal therapeutic regimen with respect to the administration of colloids, crystalloids, and water following extensive burns has not been established. During the first 24 hours after sustaining thermal injury, large volumes of crystalloids are infused to restore the depleted extracellular fluid volume. Beyond 24 hours Albuked 20 can be used to maintain plasma colloid osmotic pressure. Hypoproteinemia With or Without Edema. During major surgery, patients can lose over half of their circulating albumin with the attendant complications of oncotic deficit.(2,4,5) A similar situation can occur in sepsis or intensive care patients. Treatment with Albuked 20 may be of value in such cases.(2). Adult Respiratory Distress Syndrome (ARDS)(2,5). This is characterized by deficient oxygenation caused by pulmonary interstitial edema complicating shock and postsurgical conditions. When clinical signs are those of hypoproteinemia with a fluid volume overload, Albuked 20 together with a diuretic may play a role in therapy. Cardiopulmonary Bypass(2,6). With the relatively small priming volume required with modern pumps, preoperative dilution of the blood using albumin and crystalloid has been shown to be safe and well-tolerated. Although the limit to which the hematocrit and plasma protein concentration can be safely lowered has not been defined, it is common practice to adjust the albumin and crystalloid pump prime to achieve a hematocrit of 20% and a plasma albumin concentration of 2.5 g per 100 mL in the patient. Acute Liver Failure(2). In the uncommon situation of rapid loss of liver function with or without coma, administration of albumin may serve the double purpose of supporting the colloid osmotic pressure of the plasma as well as binding excess plasma bilirubin. Neonatal Hemolytic Disease(2,3). The administration of Albuked 20 may be indicated prior to exchange transfusion, in order to bind free bilirubin, thus lessening the risk of kernicterus. A dosage of 1 g/kg body weight is given about 1 hour prior to exchange transfusion. Caution must be observed in hypervolemic infants. Sequestration of Protein Rich Fluids(7). This occurs in such conditions as acute peritonitis, pancreatitis, mediastinitis, and extensive cellulitis. The magnitude of loss into the third space may require treatment of reduced volume or oncotic activity with an infusion of albumin. Erythrocyte Resuspension(2). Albumin may be required to avoid excessive hypoproteinemia during certain types of exchange transfusion, or with the use of very large volumes of previously frozen or washed red cells. About 25 g of albumin per liter of erythrocytes is commonly used, although the requirements in preexistent hypoproteinemia or hepatic impairment can be greater. Albuked 20 is added to the isotonic suspension of washed red cells immediately prior to transfusion. Acute Nephrosis(2). Certain patients may not respond to cyclophosphamide or steroid therapy. The steroids may even aggravate the underlying edema. In this situation a loop diuretic and 100 mL Albuked 20 repeated daily for 7 to 10 days may be helpful in controlling the edema and the patient may then respond to steroid treatment. Renal Dialysis(2). Although not part of the regular regimen of renal dialysis, Albuked 20 may be of value in the treatment of shock or hypotension in these patients. The usual volume administered is about 100 mL, taking particular care to avoid fluid overload as these patients are often fluid overloaded and cannot tolerate substantial volumes of salt solution. Situations in Which Albumin Administration is Not Warranted(2). In chronic nephrosis, infused albumin is promptly excreted by the kidneys with no relief of the chronic edema or effect on the underlying renal lesion. It is of occasional use in the rapid “priming” diuresis of nephrosis. Similarly, in hypoproteinemic states associated with chronic cirrhosis, malabsorption, protein-losing enteropathies, pancreatic insufficiency, and undernutrition, the infusion of albumin as a source of protein nutrition is not justified.</IndicationAndUsage>
    <Description>Albumin (Human) 20%, USP (Albuked 20) is made from large pools of human venous plasma by the Cohn cold ethanol fractionation process. Part of the fractionation may be performed by another licensed manufacturer. It is prepared in accordance with the applicable requirements established by the U.S. Food and Drug Administration. Albuked 20 is a 20% sterile solution of albumin in an aqueous diluent. The preparation is stabilized with 0.016 M sodium caprylate and 0.016 M acetyltryptophan. The aluminum content of the product is not more than 200 µg/L. The approximate sodium content of the product is 145 mEq/L. Albuked 20 is clear, slightly viscous, almost colorless to yellow, amber or green. It contains no preservative. Albuked 20 must be administered intravenously. Each vial of Albuked 20 is heat-treated at 60°C for 10 hours against the possibility of transmitting the hepatitis viruses. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents.(11-14) The production steps from Pooled Plasma to Effluent IV-1 in the Albuked 20 manufacturing process have been shown to decrease TSE infectivity of that experimental model agent (a total of ≥7.0 logs). These studies provide reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed.</Description>
  </NDC>
  <NDC>
    <NDCCode>76125-918-04</NDCCode>
    <PackageDescription>1 VIAL, GLASS in 1 CARTON (76125-918-04)  &gt; 50 mL in 1 VIAL, GLASS (76125-918-05)</PackageDescription>
    <NDC11Code>76125-0918-04</NDC11Code>
    <ProductNDC>76125-918</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Bivigam</ProprietaryName>
    <NonProprietaryName>Human Immunoglobulin G</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20130204</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125389</ApplicationNumber>
    <LabelerName>KEDRION BIOPHARMA, INC.</LabelerName>
    <SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/10mL</StrengthUnit>
    <Pharm_Classes>Human Immunoglobulin G [EPC],Passively Acquired Immunity [PE],Antigen Neutralization [MoA],Immunoglobulins [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>BIVIGAM is an Immune Globulin Intravenous (Human), 10% Liquid, indicated for the treatment of primary humoral immunodeficiency (PI). [1].</IndicationAndUsage>
    <Description>BIVIGAM is a purified, sterile, ready-to-use preparation of concentrated human immunoglobulin G (IgG) antibodies. The distribution of IgG subclasses is similar to that of normal plasma. 19,20 The active ingredient is human immunoglobulin purified from source human plasma and processed using a modified classical Cohn Method 6 / Oncley Method 9 fractionation procedure. BIVIGAM contains 100 10 mg/mL protein, of which not less than 96% is human immunoglobulin obtained from source human plasma. It is formulated in water for injection containing 0.100-0.140 M sodium chloride, 0.20-0.29 M glycine, 0.15 0.25% polysorbate 80, and pH 4.0 4.6. BIVIGAM contains ≤ 200 µg/mL of IgA. Each plasma donation used for the manufacture of BIVIGAM is collected from FDA licensed facilities and undergoes rigorous testing. Plasma donations must test negative for hepatitis B virus (HBV) surface antigen (HBsAg), antibodies to human immunodeficiency virus (HIV) strains 1 and 2 (anti-HIV-1/2), and antibodies to the hepatitis C virus (anti-HCV) as determined by enzyme immuno assay (EIA). In addition, each plasma unit must test negative and/or non-reactive for HIV RNA, HCV RNA, HBV DNA, Hepatitis A Virus (HAV) RNA, and Parvovirus B19 (B19 virus) DNA as determined by Nucleic Acid Amplification Testing (NAT) of plasma minipools. NAT for B19 virus DNA is also performed on a sample of the manufacturing pool and the limit for B19 virus DNA in a manufacturing pool is set not to exceed 104 IU/mL. The manufacturing process of BIVIGAM employs three steps to remove/inactivate adventitious viruses to minimize the risk of virus transmission. The steps are "Precipitation and removal of fraction III" during cold ethanol fractionation, classical "Solvent/detergent treatment" and "35 nm virus filtration". In compliance with current guidelines, the steps have been separately validated in a series of. in vitro experiments for their capacity to inactivate or remove both enveloped and non-enveloped viruses. Precipitation and removal of fraction III removes both enveloped and non-enveloped viruses, solvent/detergent treatment represents a virus inactivation step for enveloped viruses, and 35 nm virus filtration removes both enveloped and non-enveloped viruses by size exclusion. In addition to the steps above, low pH during several steps of the production process contributes to virus inactivation. The results of virus validation studies for BIVIGAM are shown in Table 3, expressed as log10 reduction factors. HIV, human immunodeficiency virus; BVDV, Bovine viral diarrhea virus, model virus for HCV; SinV, Sindbis virus, model virus for HCV; WNV, West Nile virus; PRV, Pseudorabies virus, model virus for herpes viruses and Hepatitis B virus; MEV, Murine encephalomyelitis virus, model virus for hepatitis A virus; BPV, Bovine parvovirus, model virus for human B19 virus; PPV, Porcine parvo virus, model virus for human B19 virus; SV40, Simian virus 40, model virus for highly resistant non- enveloped viruses.</Description>
  </NDC>
  <NDC>
    <NDCCode>76125-918-09</NDCCode>
    <PackageDescription>1 VIAL, GLASS in 1 CARTON (76125-918-09)  &gt; 100 mL in 1 VIAL, GLASS (76125-918-10)</PackageDescription>
    <NDC11Code>76125-0918-09</NDC11Code>
    <ProductNDC>76125-918</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Bivigam</ProprietaryName>
    <NonProprietaryName>Human Immunoglobulin G</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20130204</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125389</ApplicationNumber>
    <LabelerName>KEDRION BIOPHARMA, INC.</LabelerName>
    <SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/10mL</StrengthUnit>
    <Pharm_Classes>Human Immunoglobulin G [EPC],Passively Acquired Immunity [PE],Antigen Neutralization [MoA],Immunoglobulins [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>BIVIGAM is an Immune Globulin Intravenous (Human), 10% Liquid, indicated for the treatment of primary humoral immunodeficiency (PI). [1].</IndicationAndUsage>
    <Description>BIVIGAM is a purified, sterile, ready-to-use preparation of concentrated human immunoglobulin G (IgG) antibodies. The distribution of IgG subclasses is similar to that of normal plasma. 19,20 The active ingredient is human immunoglobulin purified from source human plasma and processed using a modified classical Cohn Method 6 / Oncley Method 9 fractionation procedure. BIVIGAM contains 100 10 mg/mL protein, of which not less than 96% is human immunoglobulin obtained from source human plasma. It is formulated in water for injection containing 0.100-0.140 M sodium chloride, 0.20-0.29 M glycine, 0.15 0.25% polysorbate 80, and pH 4.0 4.6. BIVIGAM contains ≤ 200 µg/mL of IgA. Each plasma donation used for the manufacture of BIVIGAM is collected from FDA licensed facilities and undergoes rigorous testing. Plasma donations must test negative for hepatitis B virus (HBV) surface antigen (HBsAg), antibodies to human immunodeficiency virus (HIV) strains 1 and 2 (anti-HIV-1/2), and antibodies to the hepatitis C virus (anti-HCV) as determined by enzyme immuno assay (EIA). In addition, each plasma unit must test negative and/or non-reactive for HIV RNA, HCV RNA, HBV DNA, Hepatitis A Virus (HAV) RNA, and Parvovirus B19 (B19 virus) DNA as determined by Nucleic Acid Amplification Testing (NAT) of plasma minipools. NAT for B19 virus DNA is also performed on a sample of the manufacturing pool and the limit for B19 virus DNA in a manufacturing pool is set not to exceed 104 IU/mL. The manufacturing process of BIVIGAM employs three steps to remove/inactivate adventitious viruses to minimize the risk of virus transmission. The steps are "Precipitation and removal of fraction III" during cold ethanol fractionation, classical "Solvent/detergent treatment" and "35 nm virus filtration". In compliance with current guidelines, the steps have been separately validated in a series of. in vitro experiments for their capacity to inactivate or remove both enveloped and non-enveloped viruses. Precipitation and removal of fraction III removes both enveloped and non-enveloped viruses, solvent/detergent treatment represents a virus inactivation step for enveloped viruses, and 35 nm virus filtration removes both enveloped and non-enveloped viruses by size exclusion. In addition to the steps above, low pH during several steps of the production process contributes to virus inactivation. The results of virus validation studies for BIVIGAM are shown in Table 3, expressed as log10 reduction factors. HIV, human immunodeficiency virus; BVDV, Bovine viral diarrhea virus, model virus for HCV; SinV, Sindbis virus, model virus for HCV; WNV, West Nile virus; PRV, Pseudorabies virus, model virus for herpes viruses and Hepatitis B virus; MEV, Murine encephalomyelitis virus, model virus for hepatitis A virus; BPV, Bovine parvovirus, model virus for human B19 virus; PPV, Porcine parvo virus, model virus for human B19 virus; SV40, Simian virus 40, model virus for highly resistant non- enveloped viruses.</Description>
  </NDC>
  <NDC>
    <NDCCode>0054-0370-25</NDCCode>
    <PackageDescription>100 CAPSULE in 1 BOTTLE (0054-0370-25) </PackageDescription>
    <NDC11Code>00054-0370-25</NDC11Code>
    <ProductNDC>0054-0370</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lisdexamfetamine Dimesylate</ProprietaryName>
    <NonProprietaryName>Lisdexamfetamine Dimesylate</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230825</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202827</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>LISDEXAMFETAMINE DIMESYLATE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-06-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230825</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lisdexamfetamine dimesylate capsules are indicated for the treatment of: : 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)]., 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)]., 3  Limitations of Use:, 4 The use of lisdexamfetamine dimesylate capsules is not recommended in pediatric patients younger than 6 years of age because they had higher plasma exposure and a higher incidence of adverse reactions (e.g., weight loss) than patients 6 years and older at the same dosage [see Warnings and Precautions (5.5), Use in Specific Populations (8.4)]., 5 Lisdexamfetamine dimesylate capsules are not indicated or recommended for weight loss. Use of other sympathomimetic drugs for weight loss has been associated with serious cardiovascular adverse events. The safety and effectiveness of lisdexamfetamine dimesylate capsules for the treatment of obesity have not been established [see Warnings and Precautions (5.2)].</IndicationAndUsage>
    <Description>Lisdexamfetamine dimesylate capsules, a CNS stimulant, are capsules for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C15H25N3O(CH4O3S)2, which corresponds to a molecular weight of 455.60. The chemical structure is:. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Lisdexamfetamine dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, and 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, and 40.5 mg of lisdexamfetamine) and the following inactive ingredients: ammonium hydroxide, calcium phosphate, gelatin, iron oxide black, isopropyl alcohol, magnesium stearate, microcrystalline cellulose, n-butyl alcohol, propylene glycol, shellac glaze, sodium starch glycolate, and titanium dioxide. In addition, the 10 mg capsule also contains FD&amp;C red #40. The 20 mg capsule also contains yellow iron oxide. The 30 mg capsule also contains FD&amp;C yellow #6. The 40 mg capsule also contains FD&amp;C blue #1 and FD&amp;C green #3. The 50 mg and 60 mg capsules also contain D&amp;C red #28 and FD&amp;C blue #1. The 70 mg capsule also contains D&amp;C red #28, FD&amp;C blue #1, and FD&amp;C yellow #6.</Description>
  </NDC>
  <NDC>
    <NDCCode>0054-0371-25</NDCCode>
    <PackageDescription>100 CAPSULE in 1 BOTTLE (0054-0371-25) </PackageDescription>
    <NDC11Code>00054-0371-25</NDC11Code>
    <ProductNDC>0054-0371</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lisdexamfetamine Dimesylate</ProprietaryName>
    <NonProprietaryName>Lisdexamfetamine Dimesylate</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230825</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202827</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>LISDEXAMFETAMINE DIMESYLATE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-06-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230825</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lisdexamfetamine dimesylate capsules are indicated for the treatment of: : 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)]., 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)]., 3  Limitations of Use:, 4 The use of lisdexamfetamine dimesylate capsules is not recommended in pediatric patients younger than 6 years of age because they had higher plasma exposure and a higher incidence of adverse reactions (e.g., weight loss) than patients 6 years and older at the same dosage [see Warnings and Precautions (5.5), Use in Specific Populations (8.4)]., 5 Lisdexamfetamine dimesylate capsules are not indicated or recommended for weight loss. Use of other sympathomimetic drugs for weight loss has been associated with serious cardiovascular adverse events. The safety and effectiveness of lisdexamfetamine dimesylate capsules for the treatment of obesity have not been established [see Warnings and Precautions (5.2)].</IndicationAndUsage>
    <Description>Lisdexamfetamine dimesylate capsules, a CNS stimulant, are capsules for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C15H25N3O(CH4O3S)2, which corresponds to a molecular weight of 455.60. The chemical structure is:. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Lisdexamfetamine dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, and 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, and 40.5 mg of lisdexamfetamine) and the following inactive ingredients: ammonium hydroxide, calcium phosphate, gelatin, iron oxide black, isopropyl alcohol, magnesium stearate, microcrystalline cellulose, n-butyl alcohol, propylene glycol, shellac glaze, sodium starch glycolate, and titanium dioxide. In addition, the 10 mg capsule also contains FD&amp;C red #40. The 20 mg capsule also contains yellow iron oxide. The 30 mg capsule also contains FD&amp;C yellow #6. The 40 mg capsule also contains FD&amp;C blue #1 and FD&amp;C green #3. The 50 mg and 60 mg capsules also contain D&amp;C red #28 and FD&amp;C blue #1. The 70 mg capsule also contains D&amp;C red #28, FD&amp;C blue #1, and FD&amp;C yellow #6.</Description>
  </NDC>
  <NDC>
    <NDCCode>0054-0372-25</NDCCode>
    <PackageDescription>100 CAPSULE in 1 BOTTLE (0054-0372-25) </PackageDescription>
    <NDC11Code>00054-0372-25</NDC11Code>
    <ProductNDC>0054-0372</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lisdexamfetamine Dimesylate</ProprietaryName>
    <NonProprietaryName>Lisdexamfetamine Dimesylate</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230825</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202827</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>LISDEXAMFETAMINE DIMESYLATE</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-06-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230825</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lisdexamfetamine dimesylate capsules are indicated for the treatment of: : 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)]., 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)]., 3  Limitations of Use:, 4 The use of lisdexamfetamine dimesylate capsules is not recommended in pediatric patients younger than 6 years of age because they had higher plasma exposure and a higher incidence of adverse reactions (e.g., weight loss) than patients 6 years and older at the same dosage [see Warnings and Precautions (5.5), Use in Specific Populations (8.4)]., 5 Lisdexamfetamine dimesylate capsules are not indicated or recommended for weight loss. Use of other sympathomimetic drugs for weight loss has been associated with serious cardiovascular adverse events. The safety and effectiveness of lisdexamfetamine dimesylate capsules for the treatment of obesity have not been established [see Warnings and Precautions (5.2)].</IndicationAndUsage>
    <Description>Lisdexamfetamine dimesylate capsules, a CNS stimulant, are capsules for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C15H25N3O(CH4O3S)2, which corresponds to a molecular weight of 455.60. The chemical structure is:. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Lisdexamfetamine dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, and 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, and 40.5 mg of lisdexamfetamine) and the following inactive ingredients: ammonium hydroxide, calcium phosphate, gelatin, iron oxide black, isopropyl alcohol, magnesium stearate, microcrystalline cellulose, n-butyl alcohol, propylene glycol, shellac glaze, sodium starch glycolate, and titanium dioxide. In addition, the 10 mg capsule also contains FD&amp;C red #40. The 20 mg capsule also contains yellow iron oxide. The 30 mg capsule also contains FD&amp;C yellow #6. The 40 mg capsule also contains FD&amp;C blue #1 and FD&amp;C green #3. The 50 mg and 60 mg capsules also contain D&amp;C red #28 and FD&amp;C blue #1. The 70 mg capsule also contains D&amp;C red #28, FD&amp;C blue #1, and FD&amp;C yellow #6.</Description>
  </NDC>
  <NDC>
    <NDCCode>0054-0373-25</NDCCode>
    <PackageDescription>100 CAPSULE in 1 BOTTLE (0054-0373-25) </PackageDescription>
    <NDC11Code>00054-0373-25</NDC11Code>
    <ProductNDC>0054-0373</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lisdexamfetamine Dimesylate</ProprietaryName>
    <NonProprietaryName>Lisdexamfetamine Dimesylate</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230825</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202827</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>LISDEXAMFETAMINE DIMESYLATE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-06-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230825</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lisdexamfetamine dimesylate capsules are indicated for the treatment of: : 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)]., 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)]., 3  Limitations of Use:, 4 The use of lisdexamfetamine dimesylate capsules is not recommended in pediatric patients younger than 6 years of age because they had higher plasma exposure and a higher incidence of adverse reactions (e.g., weight loss) than patients 6 years and older at the same dosage [see Warnings and Precautions (5.5), Use in Specific Populations (8.4)]., 5 Lisdexamfetamine dimesylate capsules are not indicated or recommended for weight loss. Use of other sympathomimetic drugs for weight loss has been associated with serious cardiovascular adverse events. The safety and effectiveness of lisdexamfetamine dimesylate capsules for the treatment of obesity have not been established [see Warnings and Precautions (5.2)].</IndicationAndUsage>
    <Description>Lisdexamfetamine dimesylate capsules, a CNS stimulant, are capsules for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C15H25N3O(CH4O3S)2, which corresponds to a molecular weight of 455.60. The chemical structure is:. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Lisdexamfetamine dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, and 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, and 40.5 mg of lisdexamfetamine) and the following inactive ingredients: ammonium hydroxide, calcium phosphate, gelatin, iron oxide black, isopropyl alcohol, magnesium stearate, microcrystalline cellulose, n-butyl alcohol, propylene glycol, shellac glaze, sodium starch glycolate, and titanium dioxide. In addition, the 10 mg capsule also contains FD&amp;C red #40. The 20 mg capsule also contains yellow iron oxide. The 30 mg capsule also contains FD&amp;C yellow #6. The 40 mg capsule also contains FD&amp;C blue #1 and FD&amp;C green #3. The 50 mg and 60 mg capsules also contain D&amp;C red #28 and FD&amp;C blue #1. The 70 mg capsule also contains D&amp;C red #28, FD&amp;C blue #1, and FD&amp;C yellow #6.</Description>
  </NDC>
  <NDC>
    <NDCCode>0054-0374-25</NDCCode>
    <PackageDescription>100 CAPSULE in 1 BOTTLE (0054-0374-25) </PackageDescription>
    <NDC11Code>00054-0374-25</NDC11Code>
    <ProductNDC>0054-0374</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lisdexamfetamine Dimesylate</ProprietaryName>
    <NonProprietaryName>Lisdexamfetamine Dimesylate</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230825</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202827</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>LISDEXAMFETAMINE DIMESYLATE</SubstanceName>
    <StrengthNumber>60</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-06-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230825</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lisdexamfetamine dimesylate capsules are indicated for the treatment of: : 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)]., 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)]., 3  Limitations of Use:, 4 The use of lisdexamfetamine dimesylate capsules is not recommended in pediatric patients younger than 6 years of age because they had higher plasma exposure and a higher incidence of adverse reactions (e.g., weight loss) than patients 6 years and older at the same dosage [see Warnings and Precautions (5.5), Use in Specific Populations (8.4)]., 5 Lisdexamfetamine dimesylate capsules are not indicated or recommended for weight loss. Use of other sympathomimetic drugs for weight loss has been associated with serious cardiovascular adverse events. The safety and effectiveness of lisdexamfetamine dimesylate capsules for the treatment of obesity have not been established [see Warnings and Precautions (5.2)].</IndicationAndUsage>
    <Description>Lisdexamfetamine dimesylate capsules, a CNS stimulant, are capsules for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C15H25N3O(CH4O3S)2, which corresponds to a molecular weight of 455.60. The chemical structure is:. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Lisdexamfetamine dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, and 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, and 40.5 mg of lisdexamfetamine) and the following inactive ingredients: ammonium hydroxide, calcium phosphate, gelatin, iron oxide black, isopropyl alcohol, magnesium stearate, microcrystalline cellulose, n-butyl alcohol, propylene glycol, shellac glaze, sodium starch glycolate, and titanium dioxide. In addition, the 10 mg capsule also contains FD&amp;C red #40. The 20 mg capsule also contains yellow iron oxide. The 30 mg capsule also contains FD&amp;C yellow #6. The 40 mg capsule also contains FD&amp;C blue #1 and FD&amp;C green #3. The 50 mg and 60 mg capsules also contain D&amp;C red #28 and FD&amp;C blue #1. The 70 mg capsule also contains D&amp;C red #28, FD&amp;C blue #1, and FD&amp;C yellow #6.</Description>
  </NDC>
  <NDC>
    <NDCCode>0054-0375-25</NDCCode>
    <PackageDescription>100 CAPSULE in 1 BOTTLE (0054-0375-25) </PackageDescription>
    <NDC11Code>00054-0375-25</NDC11Code>
    <ProductNDC>0054-0375</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lisdexamfetamine Dimesylate</ProprietaryName>
    <NonProprietaryName>Lisdexamfetamine Dimesylate</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230825</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202827</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>LISDEXAMFETAMINE DIMESYLATE</SubstanceName>
    <StrengthNumber>70</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-06-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230825</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lisdexamfetamine dimesylate capsules are indicated for the treatment of: : 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)]., 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)]., 3  Limitations of Use:, 4 The use of lisdexamfetamine dimesylate capsules is not recommended in pediatric patients younger than 6 years of age because they had higher plasma exposure and a higher incidence of adverse reactions (e.g., weight loss) than patients 6 years and older at the same dosage [see Warnings and Precautions (5.5), Use in Specific Populations (8.4)]., 5 Lisdexamfetamine dimesylate capsules are not indicated or recommended for weight loss. Use of other sympathomimetic drugs for weight loss has been associated with serious cardiovascular adverse events. The safety and effectiveness of lisdexamfetamine dimesylate capsules for the treatment of obesity have not been established [see Warnings and Precautions (5.2)].</IndicationAndUsage>
    <Description>Lisdexamfetamine dimesylate capsules, a CNS stimulant, are capsules for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C15H25N3O(CH4O3S)2, which corresponds to a molecular weight of 455.60. The chemical structure is:. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Lisdexamfetamine dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, and 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, and 40.5 mg of lisdexamfetamine) and the following inactive ingredients: ammonium hydroxide, calcium phosphate, gelatin, iron oxide black, isopropyl alcohol, magnesium stearate, microcrystalline cellulose, n-butyl alcohol, propylene glycol, shellac glaze, sodium starch glycolate, and titanium dioxide. In addition, the 10 mg capsule also contains FD&amp;C red #40. The 20 mg capsule also contains yellow iron oxide. The 30 mg capsule also contains FD&amp;C yellow #6. The 40 mg capsule also contains FD&amp;C blue #1 and FD&amp;C green #3. The 50 mg and 60 mg capsules also contain D&amp;C red #28 and FD&amp;C blue #1. The 70 mg capsule also contains D&amp;C red #28, FD&amp;C blue #1, and FD&amp;C yellow #6.</Description>
  </NDC>
  <NDC>
    <NDCCode>0054-0660-25</NDCCode>
    <PackageDescription>100 CAPSULE in 1 BOTTLE (0054-0660-25) </PackageDescription>
    <NDC11Code>00054-0660-25</NDC11Code>
    <ProductNDC>0054-0660</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lisdexamfetamine Dimesylate</ProprietaryName>
    <NonProprietaryName>Lisdexamfetamine Dimesylate</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240117</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202827</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>LISDEXAMFETAMINE DIMESYLATE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-06-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240117</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lisdexamfetamine dimesylate capsules are indicated for the treatment of: : 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)]., 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)]., 3  Limitations of Use:, 4 The use of lisdexamfetamine dimesylate capsules is not recommended in pediatric patients younger than 6 years of age because they had higher plasma exposure and a higher incidence of adverse reactions (e.g., weight loss) than patients 6 years and older at the same dosage [see Warnings and Precautions (5.5), Use in Specific Populations (8.4)]., 5 Lisdexamfetamine dimesylate capsules are not indicated or recommended for weight loss. Use of other sympathomimetic drugs for weight loss has been associated with serious cardiovascular adverse events. The safety and effectiveness of lisdexamfetamine dimesylate capsules for the treatment of obesity have not been established [see Warnings and Precautions (5.2)].</IndicationAndUsage>
    <Description>Lisdexamfetamine dimesylate capsules, a CNS stimulant, are capsules for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C15H25N3O(CH4O3S)2, which corresponds to a molecular weight of 455.60. The chemical structure is:. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Lisdexamfetamine dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, and 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, and 40.5 mg of lisdexamfetamine) and the following inactive ingredients: ammonium hydroxide, calcium phosphate, gelatin, iron oxide black, isopropyl alcohol, magnesium stearate, microcrystalline cellulose, n-butyl alcohol, propylene glycol, shellac glaze, sodium starch glycolate, and titanium dioxide. In addition, the 10 mg capsule also contains FD&amp;C red #40. The 20 mg capsule also contains yellow iron oxide. The 30 mg capsule also contains FD&amp;C yellow #6. The 40 mg capsule also contains FD&amp;C blue #1 and FD&amp;C green #3. The 50 mg and 60 mg capsules also contain D&amp;C red #28 and FD&amp;C blue #1. The 70 mg capsule also contains D&amp;C red #28, FD&amp;C blue #1, and FD&amp;C yellow #6.</Description>
  </NDC>
  <NDC>
    <NDCCode>0378-6854-77</NDCCode>
    <PackageDescription>90 CAPSULE in 1 BOTTLE, PLASTIC (0378-6854-77) </PackageDescription>
    <NDC11Code>00378-6854-77</NDC11Code>
    <ProductNDC>0378-6854</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lisdexamfetamine Dimesylate</ProprietaryName>
    <NonProprietaryName>Lisdexamfetamine</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230825</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202835</ApplicationNumber>
    <LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>LISDEXAMFETAMINE DIMESYLATE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-07-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230825</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lisdexamfetamine dimesylate capsules are indicated for the treatment of: : 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)]., 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)].</IndicationAndUsage>
    <Description>Lisdexamfetamine dimesylate, a CNS stimulant, is for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C17H33N3O7S2, which corresponds to a molecular weight of 455.60. The chemical structure is. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Information for lisdexamfetamine dimesylate capsules:. Lisdexamfetamine dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, or 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, or 40.5 mg of lisdexamfetamine). Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, gelatin, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate and titanium dioxide. The 10 mg capsules also contain D&amp;C Red No. 33, FD&amp;C Blue No. 1 and FD&amp;C Red No. 40. The 20 mg, 30 mg, 40 mg and 70 mg capsules also contain yellow iron oxide. The 30 mg and 70 mg capsules also contain red iron oxide. The 40 mg, 50 mg, 60 mg and 70 mg capsules also contain FD&amp;C Blue No. 2. In addition, the black imprinting ink for the 10 mg capsules contains black iron oxide, D&amp;C Yellow No. 10, FD&amp;C Blue No. 1, FD&amp;C Blue No. 2, FD&amp;C Red No. 40, propylene glycol and shellac glaze. The black imprinting ink for the 20 mg, 30 mg, 40 mg, 50 mg, 60 mg and 70 mg capsules contains ammonium hydroxide, black iron oxide, propylene glycol and shellac glaze.</Description>
  </NDC>
  <NDC>
    <NDCCode>0378-6855-77</NDCCode>
    <PackageDescription>90 CAPSULE in 1 BOTTLE, PLASTIC (0378-6855-77) </PackageDescription>
    <NDC11Code>00378-6855-77</NDC11Code>
    <ProductNDC>0378-6855</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lisdexamfetamine Dimesylate</ProprietaryName>
    <NonProprietaryName>Lisdexamfetamine</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230825</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202835</ApplicationNumber>
    <LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>LISDEXAMFETAMINE DIMESYLATE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-07-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230825</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lisdexamfetamine dimesylate capsules are indicated for the treatment of: : 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)]., 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)].</IndicationAndUsage>
    <Description>Lisdexamfetamine dimesylate, a CNS stimulant, is for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C17H33N3O7S2, which corresponds to a molecular weight of 455.60. The chemical structure is. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Information for lisdexamfetamine dimesylate capsules:. Lisdexamfetamine dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, or 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, or 40.5 mg of lisdexamfetamine). Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, gelatin, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate and titanium dioxide. The 10 mg capsules also contain D&amp;C Red No. 33, FD&amp;C Blue No. 1 and FD&amp;C Red No. 40. The 20 mg, 30 mg, 40 mg and 70 mg capsules also contain yellow iron oxide. The 30 mg and 70 mg capsules also contain red iron oxide. The 40 mg, 50 mg, 60 mg and 70 mg capsules also contain FD&amp;C Blue No. 2. In addition, the black imprinting ink for the 10 mg capsules contains black iron oxide, D&amp;C Yellow No. 10, FD&amp;C Blue No. 1, FD&amp;C Blue No. 2, FD&amp;C Red No. 40, propylene glycol and shellac glaze. The black imprinting ink for the 20 mg, 30 mg, 40 mg, 50 mg, 60 mg and 70 mg capsules contains ammonium hydroxide, black iron oxide, propylene glycol and shellac glaze.</Description>
  </NDC>
  <NDC>
    <NDCCode>0378-6856-77</NDCCode>
    <PackageDescription>90 CAPSULE in 1 BOTTLE, PLASTIC (0378-6856-77) </PackageDescription>
    <NDC11Code>00378-6856-77</NDC11Code>
    <ProductNDC>0378-6856</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lisdexamfetamine Dimesylate</ProprietaryName>
    <NonProprietaryName>Lisdexamfetamine</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230825</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202835</ApplicationNumber>
    <LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>LISDEXAMFETAMINE DIMESYLATE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-07-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230825</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lisdexamfetamine dimesylate capsules are indicated for the treatment of: : 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)]., 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)].</IndicationAndUsage>
    <Description>Lisdexamfetamine dimesylate, a CNS stimulant, is for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C17H33N3O7S2, which corresponds to a molecular weight of 455.60. The chemical structure is. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Information for lisdexamfetamine dimesylate capsules:. Lisdexamfetamine dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, or 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, or 40.5 mg of lisdexamfetamine). Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, gelatin, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate and titanium dioxide. The 10 mg capsules also contain D&amp;C Red No. 33, FD&amp;C Blue No. 1 and FD&amp;C Red No. 40. The 20 mg, 30 mg, 40 mg and 70 mg capsules also contain yellow iron oxide. The 30 mg and 70 mg capsules also contain red iron oxide. The 40 mg, 50 mg, 60 mg and 70 mg capsules also contain FD&amp;C Blue No. 2. In addition, the black imprinting ink for the 10 mg capsules contains black iron oxide, D&amp;C Yellow No. 10, FD&amp;C Blue No. 1, FD&amp;C Blue No. 2, FD&amp;C Red No. 40, propylene glycol and shellac glaze. The black imprinting ink for the 20 mg, 30 mg, 40 mg, 50 mg, 60 mg and 70 mg capsules contains ammonium hydroxide, black iron oxide, propylene glycol and shellac glaze.</Description>
  </NDC>
  <NDC>
    <NDCCode>0378-6857-77</NDCCode>
    <PackageDescription>90 CAPSULE in 1 BOTTLE, PLASTIC (0378-6857-77) </PackageDescription>
    <NDC11Code>00378-6857-77</NDC11Code>
    <ProductNDC>0378-6857</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lisdexamfetamine Dimesylate</ProprietaryName>
    <NonProprietaryName>Lisdexamfetamine</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230825</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202835</ApplicationNumber>
    <LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>LISDEXAMFETAMINE DIMESYLATE</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-07-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230825</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lisdexamfetamine dimesylate capsules are indicated for the treatment of: : 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)]., 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)].</IndicationAndUsage>
    <Description>Lisdexamfetamine dimesylate, a CNS stimulant, is for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C17H33N3O7S2, which corresponds to a molecular weight of 455.60. The chemical structure is. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Information for lisdexamfetamine dimesylate capsules:. Lisdexamfetamine dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, or 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, or 40.5 mg of lisdexamfetamine). Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, gelatin, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate and titanium dioxide. The 10 mg capsules also contain D&amp;C Red No. 33, FD&amp;C Blue No. 1 and FD&amp;C Red No. 40. The 20 mg, 30 mg, 40 mg and 70 mg capsules also contain yellow iron oxide. The 30 mg and 70 mg capsules also contain red iron oxide. The 40 mg, 50 mg, 60 mg and 70 mg capsules also contain FD&amp;C Blue No. 2. In addition, the black imprinting ink for the 10 mg capsules contains black iron oxide, D&amp;C Yellow No. 10, FD&amp;C Blue No. 1, FD&amp;C Blue No. 2, FD&amp;C Red No. 40, propylene glycol and shellac glaze. The black imprinting ink for the 20 mg, 30 mg, 40 mg, 50 mg, 60 mg and 70 mg capsules contains ammonium hydroxide, black iron oxide, propylene glycol and shellac glaze.</Description>
  </NDC>
  <NDC>
    <NDCCode>0378-6858-77</NDCCode>
    <PackageDescription>90 CAPSULE in 1 BOTTLE, PLASTIC (0378-6858-77) </PackageDescription>
    <NDC11Code>00378-6858-77</NDC11Code>
    <ProductNDC>0378-6858</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lisdexamfetamine Dimesylate</ProprietaryName>
    <NonProprietaryName>Lisdexamfetamine</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230825</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202835</ApplicationNumber>
    <LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>LISDEXAMFETAMINE DIMESYLATE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-07-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230825</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lisdexamfetamine dimesylate capsules are indicated for the treatment of: : 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)]., 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)].</IndicationAndUsage>
    <Description>Lisdexamfetamine dimesylate, a CNS stimulant, is for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C17H33N3O7S2, which corresponds to a molecular weight of 455.60. The chemical structure is. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Information for lisdexamfetamine dimesylate capsules:. Lisdexamfetamine dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, or 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, or 40.5 mg of lisdexamfetamine). Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, gelatin, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate and titanium dioxide. The 10 mg capsules also contain D&amp;C Red No. 33, FD&amp;C Blue No. 1 and FD&amp;C Red No. 40. The 20 mg, 30 mg, 40 mg and 70 mg capsules also contain yellow iron oxide. The 30 mg and 70 mg capsules also contain red iron oxide. The 40 mg, 50 mg, 60 mg and 70 mg capsules also contain FD&amp;C Blue No. 2. In addition, the black imprinting ink for the 10 mg capsules contains black iron oxide, D&amp;C Yellow No. 10, FD&amp;C Blue No. 1, FD&amp;C Blue No. 2, FD&amp;C Red No. 40, propylene glycol and shellac glaze. The black imprinting ink for the 20 mg, 30 mg, 40 mg, 50 mg, 60 mg and 70 mg capsules contains ammonium hydroxide, black iron oxide, propylene glycol and shellac glaze.</Description>
  </NDC>
  <NDC>
    <NDCCode>0378-6859-77</NDCCode>
    <PackageDescription>90 CAPSULE in 1 BOTTLE, PLASTIC (0378-6859-77) </PackageDescription>
    <NDC11Code>00378-6859-77</NDC11Code>
    <ProductNDC>0378-6859</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lisdexamfetamine Dimesylate</ProprietaryName>
    <NonProprietaryName>Lisdexamfetamine</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230825</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202835</ApplicationNumber>
    <LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>LISDEXAMFETAMINE DIMESYLATE</SubstanceName>
    <StrengthNumber>60</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-07-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230825</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lisdexamfetamine dimesylate capsules are indicated for the treatment of: : 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)]., 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)].</IndicationAndUsage>
    <Description>Lisdexamfetamine dimesylate, a CNS stimulant, is for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C17H33N3O7S2, which corresponds to a molecular weight of 455.60. The chemical structure is. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Information for lisdexamfetamine dimesylate capsules:. Lisdexamfetamine dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, or 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, or 40.5 mg of lisdexamfetamine). Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, gelatin, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate and titanium dioxide. The 10 mg capsules also contain D&amp;C Red No. 33, FD&amp;C Blue No. 1 and FD&amp;C Red No. 40. The 20 mg, 30 mg, 40 mg and 70 mg capsules also contain yellow iron oxide. The 30 mg and 70 mg capsules also contain red iron oxide. The 40 mg, 50 mg, 60 mg and 70 mg capsules also contain FD&amp;C Blue No. 2. In addition, the black imprinting ink for the 10 mg capsules contains black iron oxide, D&amp;C Yellow No. 10, FD&amp;C Blue No. 1, FD&amp;C Blue No. 2, FD&amp;C Red No. 40, propylene glycol and shellac glaze. The black imprinting ink for the 20 mg, 30 mg, 40 mg, 50 mg, 60 mg and 70 mg capsules contains ammonium hydroxide, black iron oxide, propylene glycol and shellac glaze.</Description>
  </NDC>
  <NDC>
    <NDCCode>0378-6860-77</NDCCode>
    <PackageDescription>90 CAPSULE in 1 BOTTLE, PLASTIC (0378-6860-77) </PackageDescription>
    <NDC11Code>00378-6860-77</NDC11Code>
    <ProductNDC>0378-6860</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lisdexamfetamine Dimesylate</ProprietaryName>
    <NonProprietaryName>Lisdexamfetamine</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230825</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202835</ApplicationNumber>
    <LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>LISDEXAMFETAMINE DIMESYLATE</SubstanceName>
    <StrengthNumber>70</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-07-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230825</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lisdexamfetamine dimesylate capsules are indicated for the treatment of: : 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)]., 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)].</IndicationAndUsage>
    <Description>Lisdexamfetamine dimesylate, a CNS stimulant, is for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C17H33N3O7S2, which corresponds to a molecular weight of 455.60. The chemical structure is. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Information for lisdexamfetamine dimesylate capsules:. Lisdexamfetamine dimesylate capsules contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, 60 mg, or 70 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, 34.7 mg, or 40.5 mg of lisdexamfetamine). Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, gelatin, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate and titanium dioxide. The 10 mg capsules also contain D&amp;C Red No. 33, FD&amp;C Blue No. 1 and FD&amp;C Red No. 40. The 20 mg, 30 mg, 40 mg and 70 mg capsules also contain yellow iron oxide. The 30 mg and 70 mg capsules also contain red iron oxide. The 40 mg, 50 mg, 60 mg and 70 mg capsules also contain FD&amp;C Blue No. 2. In addition, the black imprinting ink for the 10 mg capsules contains black iron oxide, D&amp;C Yellow No. 10, FD&amp;C Blue No. 1, FD&amp;C Blue No. 2, FD&amp;C Red No. 40, propylene glycol and shellac glaze. The black imprinting ink for the 20 mg, 30 mg, 40 mg, 50 mg, 60 mg and 70 mg capsules contains ammonium hydroxide, black iron oxide, propylene glycol and shellac glaze.</Description>
  </NDC>
  <NDC>
    <NDCCode>0406-5124-01</NDCCode>
    <PackageDescription>100 TABLET, CHEWABLE in 1 BOTTLE (0406-5124-01) </PackageDescription>
    <NDC11Code>00406-5124-01</NDC11Code>
    <ProductNDC>0406-5124</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lisdexamfetamine Dimesylate</ProprietaryName>
    <NonProprietaryName>Lisdexamfetamine Dimesylate</NonProprietaryName>
    <DosageFormName>TABLET, CHEWABLE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20241217</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA218850</ApplicationNumber>
    <LabelerName>SpecGx LLC</LabelerName>
    <SubstanceName>LISDEXAMFETAMINE DIMESYLATE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2025-12-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241217</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lisdexamfetamine dimesylate chewable tablets are indicated for the treatment of: 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)] , 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)]. .</IndicationAndUsage>
    <Description>Lisdexamfetamine dimesylate chewable tablets, a CNS stimulant, are for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C15H25N3O(CH4O3S)2, which corresponds to a molecular weight of 455.60. The chemical structure is. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Information for lisdexamfetamine dimesylate chewable tablets. Lisdexamfetamine dimesylate chewable tablets contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, and 60 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, and 34.7 mg of lisdexamfetamine). Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, guar gum, magnesium stearate, mannitol, microcrystalline cellulose, sucralose, artificial strawberry flavor.</Description>
  </NDC>
  <NDC>
    <NDCCode>0406-5125-01</NDCCode>
    <PackageDescription>100 TABLET, CHEWABLE in 1 BOTTLE (0406-5125-01) </PackageDescription>
    <NDC11Code>00406-5125-01</NDC11Code>
    <ProductNDC>0406-5125</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lisdexamfetamine Dimesylate</ProprietaryName>
    <NonProprietaryName>Lisdexamfetamine Dimesylate</NonProprietaryName>
    <DosageFormName>TABLET, CHEWABLE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20241217</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA218850</ApplicationNumber>
    <LabelerName>SpecGx LLC</LabelerName>
    <SubstanceName>LISDEXAMFETAMINE DIMESYLATE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2025-12-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241217</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lisdexamfetamine dimesylate chewable tablets are indicated for the treatment of: 1 Attention Deficit Hyperactivity Disorder (ADHD) in adults and pediatric patients 6 years and older [see Clinical Studies (14.1)] , 2 Moderate to severe binge eating disorder (BED) in adults [see Clinical Studies (14.2)]. .</IndicationAndUsage>
    <Description>Lisdexamfetamine dimesylate chewable tablets, a CNS stimulant, are for once-a-day oral administration. The chemical designation for lisdexamfetamine dimesylate is (2S)-2,6-diamino-N-[(1S)-1-methyl-2-phenylethyl] hexanamide dimethanesulfonate. The molecular formula is C15H25N3O(CH4O3S)2, which corresponds to a molecular weight of 455.60. The chemical structure is. Lisdexamfetamine dimesylate is a white to off-white powder that is soluble in water (792 mg/mL). Information for lisdexamfetamine dimesylate chewable tablets. Lisdexamfetamine dimesylate chewable tablets contain 10 mg, 20 mg, 30 mg, 40 mg, 50 mg, and 60 mg of lisdexamfetamine dimesylate (equivalent to 5.8 mg, 11.6 mg, 17.3 mg, 23.1 mg, 28.9 mg, and 34.7 mg of lisdexamfetamine). Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, guar gum, magnesium stearate, mannitol, microcrystalline cellulose, sucralose, artificial strawberry flavor.</Description>
  </NDC>
</NDCList>