{
"NDC": [
{
"NDCCode": "76282-283-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (76282-283-90) ",
"NDC11Code": "76282-0283-90",
"ProductNDC": "76282-283",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250410",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090478",
"LabelerName": "EXELAN PHARMACEUTICALS, INC.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250410",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets,USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt with the empirical formula C20 H21 NHCl and a molecular weight of 311.9. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride, USP is designated chemically as 3-(5H –dibenzo[a,d]cyclohepten-5 ylidene)-N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets USP, 10 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry yellow (hypromellose 3cp, hypromellose 6cp, titanium dioxide, PEG 400, iron oxide yellow and polysorbate 80)."
},
{
"NDCCode": "76282-283-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (76282-283-10) ",
"NDC11Code": "76282-0283-10",
"ProductNDC": "76282-283",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250410",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090478",
"LabelerName": "EXELAN PHARMACEUTICALS, INC.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250410",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets,USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt with the empirical formula C20 H21 NHCl and a molecular weight of 311.9. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride, USP is designated chemically as 3-(5H –dibenzo[a,d]cyclohepten-5 ylidene)-N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets USP, 10 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry yellow (hypromellose 3cp, hypromellose 6cp, titanium dioxide, PEG 400, iron oxide yellow and polysorbate 80)."
},
{
"NDCCode": "76282-283-18",
"PackageDescription": "180 TABLET in 1 BOTTLE (76282-283-18) ",
"NDC11Code": "76282-0283-18",
"ProductNDC": "76282-283",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250410",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090478",
"LabelerName": "EXELAN PHARMACEUTICALS, INC.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250410",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets,USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt with the empirical formula C20 H21 NHCl and a molecular weight of 311.9. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride, USP is designated chemically as 3-(5H –dibenzo[a,d]cyclohepten-5 ylidene)-N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets USP, 10 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry yellow (hypromellose 3cp, hypromellose 6cp, titanium dioxide, PEG 400, iron oxide yellow and polysorbate 80)."
},
{
"NDCCode": "76282-283-27",
"PackageDescription": "270 TABLET in 1 BOTTLE (76282-283-27) ",
"NDC11Code": "76282-0283-27",
"ProductNDC": "76282-283",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250410",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090478",
"LabelerName": "EXELAN PHARMACEUTICALS, INC.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250410",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets,USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt with the empirical formula C20 H21 NHCl and a molecular weight of 311.9. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride, USP is designated chemically as 3-(5H –dibenzo[a,d]cyclohepten-5 ylidene)-N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets USP, 10 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry yellow (hypromellose 3cp, hypromellose 6cp, titanium dioxide, PEG 400, iron oxide yellow and polysorbate 80)."
},
{
"NDCCode": "76282-283-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (76282-283-30) ",
"NDC11Code": "76282-0283-30",
"ProductNDC": "76282-283",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250410",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090478",
"LabelerName": "EXELAN PHARMACEUTICALS, INC.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250410",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets,USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt with the empirical formula C20 H21 NHCl and a molecular weight of 311.9. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride, USP is designated chemically as 3-(5H –dibenzo[a,d]cyclohepten-5 ylidene)-N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets USP, 10 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry yellow (hypromellose 3cp, hypromellose 6cp, titanium dioxide, PEG 400, iron oxide yellow and polysorbate 80)."
},
{
"NDCCode": "76282-283-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (76282-283-60) ",
"NDC11Code": "76282-0283-60",
"ProductNDC": "76282-283",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250410",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090478",
"LabelerName": "EXELAN PHARMACEUTICALS, INC.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250410",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets,USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt with the empirical formula C20 H21 NHCl and a molecular weight of 311.9. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride, USP is designated chemically as 3-(5H –dibenzo[a,d]cyclohepten-5 ylidene)-N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets USP, 10 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry yellow (hypromellose 3cp, hypromellose 6cp, titanium dioxide, PEG 400, iron oxide yellow and polysorbate 80)."
},
{
"NDCCode": "21695-283-90",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (21695-283-90)",
"NDC11Code": "21695-0283-90",
"ProductNDC": "21695-283",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Temazepam",
"NonProprietaryName": "Temazepam",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19870421",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071457",
"LabelerName": "Rebel Distributors Corp",
"SubstanceName": "TEMAZEPAM",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Temazepam Capsules, USP are indicated for the short-term treatment of insomnia (generally 7 to 10 days). For patients with short-term insomnia, instructions in the prescription should indicate that Temazepam Capsules should be used for short periods of time (7 to 10 days). The clinical trials performed in support of efficacy were 2 weeks in duration with the final formal assessment of sleep latency performed at the end of treatment.",
"Description": "Temazepam is a benzodiazepine hypnotic agent. The chemical name is 7-chloro 1,3-dihydro-3-hydroxyl-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one, and the structural formula is. C. 16. H. 13. ClN. 2. O. 2. MW = 300.74. Temazepam is a white, crystalline substance, very slightly soluble in water and sparingly soluble in alcohol USP. Temazepam capsules, 15 mg and 30 mg, are for oral administration. 15 mg and 30 mg Capsules. Active Ingredient: temazepam USP. 15 mg Capsules. Inactive Ingredients:. Corn starch, lactose anhydrous, magnesium stearate, sodium lauryl sulfate, FD&C Blue #1, FD&C yellow # 5, FD&C yellow # 6, gelatin and titanium dioxide. May also include:. benzyl alcohol, butylparaben, sodium lauryl sulfate, edetate calcium disodium, methylparaben, propyl paraben and sodium propionate. Imprinting ink may contain ammonium hydroxide, ethanol, 2-propanol, butanol, pharmaceutical shellac, potassium hydroxide, propylene glycol, black iron oxide, and other ingredents. 30 mg Capsules. Inactive Ingredients. Corn starch, lactose anhydrous, magnesium stearate, sodium lauryl sulfate, gelatin and titanium dioxide. May also include:. benzyl alcohol, butylparaben, sodium lauryl sulfate, edetate calcium disodium, methylparaben, propyl paraben and sodium propionate. Imprinting ink may contain ammonium hydroxide, ethanol, 2-propanol, butanol, pharmaceutical shellac, potassium hydroxide, propylene glycol, black iron oxide, and other ingredents."
},
{
"NDCCode": "33342-283-10",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (33342-283-10) ",
"NDC11Code": "33342-0283-10",
"ProductNDC": "33342-283",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine,valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Amlodipine,valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250106",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207299",
"LabelerName": "Macleods Pharmaceuticals Limited",
"SubstanceName": "AMLODIPINE BESYLATE; VALSARTAN; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "5; 160; 12.5",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Active",
"LastUpdate": "2025-01-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250106",
"SamplePackage": "N",
"IndicationAndUsage": "Amlodipine, valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including amlodipine, hydrochlorothiazide, and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with amlodipine, valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Limitation of Use Amlodipine, valsartan and hydrochlorothiazide tablet is not indicated for the initial therapy of hypertension [see Dosage and Administration (2)].",
"Description": "Amlodipine, valsartan and hydrochlorothiazide tablets, USP are a fixed combination of amlodipine, valsartan, and hydrochlorothiazide. Amlodipine, valsartan and hydrochlorothiazide tablets, USP contains the besylate salt of amlodipine, a dihydropyridine calcium channel blocker (CCB). Amlodipine besylate, USP is a white to pale yellow crystalline powder, slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate’s chemical name is 3-Ethyl 5-methyl (±)-2-[(2-aminoethoxy)methyl]-4(o-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulfonate ; its structural formula is. Its molecular formula is C20H25ClN2O5.C6H6O3S and its molecular weight is 567.1. Valsartan, USP is a nonpeptide, orally active, and specific angiotensin II antagonist acting on the AT1 receptor subtype. Valsartan is a white to practically white fine powder, soluble in ethanol and methanol and slightly soluble in water. Valsartan’s chemical name is N-(1-oxopentyl)-N-[[2´-(1H-tetrazol-5-yl) [1,1´-biphenyl]-4yl]methyl]-L-valine; its structural formula is. Its molecular formula is C24H29N5O3 and its molecular weight is 435.5. Hydrochlorothiazide, USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its molecular formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Amlodipine, valsartan and hydrochlorothiazide film-coated tablets, USP are formulated in 5 strengths for oral administration with a combination of amlodipine besylate, valsartan, and hydrochlorothiazide, providing for the following available combinations. 5/160/12.5 mg, 10/160/12.5 mg, 5/160/25 mg, 10/160/25 mg, and 10/320/25 mg amlodipine besylate/valsartan/hydrochlorothiazide. The inactive ingredients for all strengths of the tablets include colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc. Additionally, the 5/160/12.5 mg strength contains titanium dioxide; the 10/160/12.5 mg strength contains titanium dioxide and yellow and red iron oxides; the 5/160/25 mg strength contains titanium dioxide and yellow iron oxide, and the 10/160/25 mg and 10/320/25 mg strengths both contain yellow iron oxide."
},
{
"NDCCode": "43547-283-09",
"PackageDescription": "90 TABLET in 1 BOTTLE (43547-283-09) ",
"NDC11Code": "43547-0283-09",
"ProductNDC": "43547-283",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Telmisartan",
"NonProprietaryName": "Telmisartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170820",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207882",
"LabelerName": "Solco Healthcare US, LLC",
"SubstanceName": "TELMISARTAN",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170820",
"SamplePackage": "N",
"IndicationAndUsage": "Telmisartan is an angiotensin II receptor blocker (ARB) indicated for: 1 Treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1), 2 Cardiovascular (CV) risk reduction in patients unable to take ACE inhibitors (1.2).",
"Description": "Telmisartan is a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C33H30N4O2, its molecular weight is 514.63, and its structural formula is. Telmisartan is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan tablets USP, are available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan, USP. The tablets contain the following inactive ingredients: magnesium stearate, mannitol, meglumine, povidone, and sodium hydroxide. Telmisartan tablets are hygroscopic and require protection from moisture."
},
{
"NDCCode": "51655-283-26",
"PackageDescription": "90 TABLET in 1 BOTTLE, DISPENSING (51655-283-26)",
"NDC11Code": "51655-0283-26",
"ProductNDC": "51655-283",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Warfarin Sodium",
"NonProprietaryName": "Warfarin Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150310",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040663",
"LabelerName": "Northwind Pharmaceuticals, LLC",
"SubstanceName": "WARFARIN SODIUM",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Vitamin K Antagonist [EPC],Vitamin K Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Warfarin sodium tablets,USP are indicated for. Prophylaxis and treatment of venous thrombosis and its extension, pulmonary embolism (PE).Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation (AF) and/or cardiac valve replacement.Reduction in the risk of death, recurrent myocardial infarction (MI), and thromboembolic events such as stroke or systemic embolization after myocardial infarction. Limitations of Use. Warfarin sodium tablets, USP have no direct effect on an established thrombus, nor does it reverse ischemic tissue damage. Once a thrombus has occurred, however, the goals of anticoagulant treatment are to prevent further extension of the formed clot and to prevent secondary thromboembolic complications that may result in serious and possibly fatal sequelae.",
"Description": "Warfarin sodium is an anticoagulant that acts by inhibiting vitamin K-dependent coagulation factors. Chemically, it is 3-(α-acetonylbenzyl)-4-hydroxycoumarin and is a racemic mixture of the R- and S-enantiomers. Crystalline warfarin sodium is an isopropanol clathrate. Its molecular formula is C19H15NaO4. Warfarin sodium, USP is a white crystalline powder. It is very soluble in water. Each warfarin sodium tablet intended for oral administration contains warfarin sodium clathrates equivalent to 1 mg or 2 mg or 2.5 mg or 3 mg or 4 mg or 5 mg or 6 mg or 7.5 mg or 10 mg of warfarin sodium. In addition each tablet contains the inactive ingredients hydroxypropyl cellulose, lactose monohydrate, magnesium stearate and pregelatinized starch. Additionally each 1 mg tablet contains D&C red no. 6 barium lake, 2 mg tablet contains FD&C blue no. 2 aluminum lake and FD&C red no. 40 aluminum lake, 2.5 mg tablet contains D&C yellow no. 10 aluminum lake and FD&C blue no. 1 aluminum lake, 3 mg tablet contains FD&C yellow no. 6 aluminum lake, FD&C blue no. 2 aluminum lake and FD&C red no. 40 aluminum lake, 4 mg tablet contains FD&C blue no. 1 aluminum lake, 5 mg tablet contains FD&C yellow no. 6 aluminum lake, 6 mg tablet contains FD&C yellow no. 6 aluminum lake and FD&C blue no. 1 aluminum lake, 7.5 mg tablet contains D&C yellow no. 10 aluminum lake and FD&C yellow no.6 aluminum lake and 10 mg tablet is dye free."
},
{
"NDCCode": "53217-283-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (53217-283-90)",
"NDC11Code": "53217-0283-90",
"ProductNDC": "53217-283",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisinopril",
"NonProprietaryName": "Lisinopril",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20060113",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077321",
"LabelerName": "Aidarex Pharmaceuticals LLC",
"SubstanceName": "LISINOPRIL",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Lisinopril tablet USP is an angiotensin converting enzyme (ACE) inhibitor indicated for: 1 Treatment of hypertension in adults and pediatric patients 6 years of age and older (1.1), 2 Adjunct therapy for heart failure (1.2), 3 Treatment of Acute Myocardial Infarction (1.3).",
"Description": "Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O52H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets USP are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets - colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, pre-gelatinized starch and starch (corn). 5 mg, 10 mg, 20 mg and 30 mg tablets – colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, red ferric oxide, pre-gelatinized starch and starch (corn). 40 mg tablets - colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, yellow ferric oxide, pre-gelatinized starch and starch (corn)."
},
{
"NDCCode": "59746-283-90",
"PackageDescription": "90 TABLET, DELAYED RELEASE in 1 BOTTLE (59746-283-90) ",
"NDC11Code": "59746-0283-90",
"ProductNDC": "59746-283",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pantoprazole Sodium",
"NonProprietaryName": "Pantoprazole Sodium",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20110901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090901",
"LabelerName": "Jubilant Cadista Pharmaceuticals Inc.",
"SubstanceName": "PANTOPRAZOLE SODIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Proton Pump Inhibitor [EPC],Proton Pump Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2021-10-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20110901",
"SamplePackage": "N"
},
{
"NDCCode": "61786-283-19",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (61786-283-19)",
"NDC11Code": "61786-0283-19",
"ProductNDC": "61786-283",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fenofibrate",
"NonProprietaryName": "Fenofibrate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150429",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076635",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "FENOFIBRATE",
"StrengthNumber": "160",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Peroxisome Proliferator Receptor alpha Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-11-20",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "63187-283-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (63187-283-90) ",
"NDC11Code": "63187-0283-90",
"ProductNDC": "63187-283",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Topiramate",
"NonProprietaryName": "Topiramate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090327",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077627",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "TOPIRAMATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2020-09-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190101",
"SamplePackage": "N",
"IndicationAndUsage": "Topiramate tablets USP are an antiepileptic (AED) agent indicated for: 1 Monotherapy epilepsy: Initial monotherapy in patients ≥10 years of age with partial onset or primary generalized tonic-clonic seizures (1.1), 2 Adjunctive therapy epilepsy: Adjunctive therapy for adults and pediatric patients (2 to 16 years of age) with partial onset seizures or primary generalized tonic-clonic seizures, and in patients ≥2 years of age with seizures associated with Lennox-Gastaut syndrome (LGS) (1.2).",
"Description": "Topiramate USP is a sulfamate-substituted monosaccharide. Topiramate Tablets USP are available as 25 mg, 50 mg, 100 mg, and 200 mg round tablets for oral administration. Topiramate USP is a white to off white powder. It is freely soluble in dichloromethane. Topiramate USP has the molecular formula C12H21NO8S and a molecular weight of 339.37. Topiramate USP is designated chemically as 2,3:4,5-Di-O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula. Topiramate tablets USP contain the following inactive ingredients: lactose monohydrate, pregelatinized starch, microcrystalline cellulose, sodium starch glycolate, magnesium stearate, purified water, hypromellose, titanium dioxide, polyethylene glycol, and polysorbate 80. The 50 mg tablets also contain iron oxide yellow and FD&C yellow# 6 for color. The 100 mg and 200 mg tablets also contain iron oxide red and iron oxide yellow for color."
},
{
"NDCCode": "65162-283-09",
"PackageDescription": "90 TABLET, EXTENDED RELEASE in 1 BOTTLE (65162-283-09) ",
"NDC11Code": "65162-0283-09",
"ProductNDC": "65162-283",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Paliperidone",
"NonProprietaryName": "Paliperidone",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20190924",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204707",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "PALIPERIDONE",
"StrengthNumber": "9",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-09-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190924",
"SamplePackage": "N",
"Description": "Paliperidone extended-release tablets contains paliperidone USP, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. Paliperidone, USP contains a racemic mixture of (+)- and (-)- paliperidone. The chemical name is (±)-3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-9-hydroxy-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O3 and its molecular weight is 426.49. The structural formula is. Paliperidone, USP is sparingly soluble in 0.1N HCl and methylene chloride; practically insoluble in water, 0.1N NaOH, and hexane; and slightly soluble in N,N-dimethylformamide. Paliperidone extended-release tablets are intended for oral administration and are available in 1.5 mg (brown), 3 mg (white), 6 mg (light beige), and 9 mg (pink) strengths. Inactive ingredients are colloidal silicon dioxide, fumaric acid, hypromellose, lactose monohydrate, macrogol, magnesium stearate, methacrylic acid copolymer, microcrystalline cellulose, polyethylene oxides, povidone, talc and triethyl citrate. The 1.5 mg tablets also contain iron oxide black, iron oxide red and iron oxide yellow. The 6 mg tablets also contain iron oxide red and iron oxide yellow. The 9 mg tablets also contain iron oxide black, iron oxide red and iron oxide yellow. Delivery System Components and Performance. Paliperidone extended-release tablets use a hydrophilic matrix core and pH dependent enteric coating to deliver paliperidone, USP at a controlled rate. The delivery system consists of an inner core composed of the drug, rate controlling polymers and other excipients. The core is coated with multiple layers comprising of delayed release polymer and a drug layering polymer system. Each tablet strength has a different colored coating. In an aqueous environment, such as the gastrointestinal tract, the water-dispersible overcoat erodes quickly. The combination of the coating layers ensures an initial drug release, while delaying exposure of the matrix core. Upon attaining the intended pH, the delayed release coating dissolves, the hydrophilic polymers of the core hydrate and swell forming a gel like barrier that regulates the rate at which the drug is released from the tablet, ensuring a steady and prolonged delivery."
},
{
"NDCCode": "68382-283-16",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (68382-283-16) ",
"NDC11Code": "68382-0283-16",
"ProductNDC": "68382-283",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200212",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203000",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "VALSARTAN; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "320; 25",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC],Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [CS]",
"Status": "Deprecated",
"LastUpdate": "2021-10-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20200212",
"SamplePackage": "N"
},
{
"NDCCode": "69452-283-19",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (69452-283-19) > 90 CAPSULE, LIQUID FILLED in 1 BLISTER PACK",
"NDC11Code": "69452-0283-19",
"ProductNDC": "69452-283",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Loratadine",
"NonProprietaryName": "Loratadine",
"DosageFormName": "CAPSULE, LIQUID FILLED",
"RouteName": "ORAL",
"StartMarketingDate": "20200320",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202538",
"LabelerName": "Bionpharma Inc.",
"SubstanceName": "LORATADINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20200320",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose, 2 itchy, watery eyes, 3 sneezing, 4 itching of the nose or throat."
},
{
"NDCCode": "71205-283-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (71205-283-90) ",
"NDC11Code": "71205-0283-90",
"ProductNDC": "71205-283",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluconazole",
"NonProprietaryName": "Fluconazole",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170406",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208963",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "FLUCONAZOLE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2020-03-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190601",
"SamplePackage": "N",
"IndicationAndUsage": "Fluconazole tablets are indicated for the treatment of: : 1 1.Vaginal candidiasis (vaginal yeast infections due to Candida)., 2 2.Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole tablets were also effective for the treatment of Candida urinary tract infections, peritonitis, and systemic Candida infections including candidemia, disseminated candidiasis, and pneumonia., 3 3.Cryptococcal meningitis. Before prescribing fluconazole tablets for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIES section. Studies comparing fluconazole tablets to amphotericin B in non-HIV infected patients have not been conducted.",
"Description": "Fluconazole, the first of a new subclass of synthetic triazole antifungal agents, is available as tablets for oral administration. Fluconazole is designated chemically as 2,4-difluoro-α,α1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with an molecular formula of C13H12F2N6O and molecular weight of 306.3. The structural formula is. Fluconazole USP is a white or almost white crystalline powder which is freely soluble in methanol, soluble in alcohol and in acetone, sparingly soluble in isopropanol and in chloroform, slightly soluble in water, very slightly soluble in toluene. Each fluconazole tablet, USP intended for oral administration contains 50 mg, 100 mg, 150 mg, or 200 mg of fluconazole USP. In addition, each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, fd&c red no. 40 aluminum lake, magnesium stearate, microcrystalline cellulose and povidone. Fluconazole tablet meets USP Dissolution Test 2."
},
{
"NDCCode": "71610-283-60",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (71610-283-60) ",
"NDC11Code": "71610-0283-60",
"ProductNDC": "71610-283",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Celecoxib",
"NonProprietaryName": "Celecoxib",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20141210",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020998",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "CELECOXIB",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190524",
"SamplePackage": "N",
"IndicationAndUsage": "Celecoxib is indicated.",
"Description": "Celecoxib capsule is a nonsteroidal anti-inflammatory drug, available as capsules containing 50 mg, 100 mg, 200 mg and 400 mg celecoxib for oral administration. The chemical name is 4-[5-(4-methylphenyl)- 3-(trifluoromethyl)-1H-pyrazol-1-yl] benzenesulfonamide and is a diaryl-substituted pyrazole. The molecular weight is 381.38. Its molecular formula is C17H14F3N3O2S, and it has the following chemical structure. Celecoxib is a white to off-white powder with a pKa of 11.1 (sulfonamide moiety). Celecoxib is hydrophobic (log P is 3.5) and is practically insoluble in aqueous media at physiological pH range. The inactive ingredients in Celecoxib include: croscarmellose sodium, edible inks, gelatin, lactose monohydrate, magnesium stearate, povidone and sodium lauryl sulfate."
},
{
"NDCCode": "72189-283-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (72189-283-90) ",
"NDC11Code": "72189-0283-90",
"ProductNDC": "72189-283",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20211019",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208170",
"LabelerName": "DirectRx",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20211019",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets should be used only for short periods (up to 2 or 3 weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a tricyclic amine salt which is white to off white, odourless, crystalline powder with the molecular formula C 20H 21N HCl and a molecular weight of 311.9. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water, in alcohol and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride, insoluble in n-hexane. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-(5H -dibenzo[a,d] cyclohepten-5-ylidene)- N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Image Cyclobenzaprine hydrochloride tablets, USP are available as 5 mg, 7.5 mg and 10 mg tablets for oral administration. Each 5 mg, 7.5 mg and 10 mg tablet contains cyclobenzaprine hydrochloride and the following inactive ingredients: crospovidone, hypromellose, lactose anhydrous, macrogol, magnesium stearate, polysorbate 80, pregelatinized starch, silicified microcrystalline cellulose, titanium dioxide. The tablets of 5 mg and 10 mg also contain D&C Yellow #10 Aluminum Lake and FD&C Yellow #6 Sunset Yellow FCF Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue #2/INDIGO Carmine Aluminum Lake."
},
{
"NDCCode": "72603-283-01",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (72603-283-01) ",
"NDC11Code": "72603-0283-01",
"ProductNDC": "72603-283",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20241001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214344",
"LabelerName": "NorthStar RxLLC",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241001",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated: To reduce the risk of: o Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHD o MI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHD o Non-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: o Adults with primary hyperlipidemia. o Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH). As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH). As an adjunct to diet for the treatment of adults with: o Primary dysbetalipoproteinemia o Hypertriglyceridemia.",
"Description": "Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is 1 H-Pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)- β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino) carbonyl]-, calcium salt (2:1), [R-(R*, R*)] trihydrate. The molecular formula of atorvastatin calcium is (C 33H 34FN 2O 5) 2Ca 2+3H 2O and its molecular weight is 1209.42. Its structural formula is:. Atorvastatin calcium, USP is a white to off-white powder. Atorvastatin calcium is very slightly soluble in pH 1.2, pH 4.5 and pH 6.8 buffers; freely soluble in methanol; slightly soluble in ethanol; practically insoluble in acetonitrile. Atorvastatin Calcium Tablets, USP for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.825 mg, 21.649 mg, 43.299 mg or 86.579 mg atorvastatin calcium trihydrate, USP) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polysorbate 80 and film coating contains hypromellose, polyethylene glycol, talc and titanium dioxide. USP dissolution test is pending."
},
{
"NDCCode": "76420-283-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (76420-283-90) ",
"NDC11Code": "76420-0283-90",
"ProductNDC": "76420-283",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clonidine Hydrochloride",
"NonProprietaryName": "Clonidine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA070925",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "CLONIDINE HYDROCHLORIDE",
"StrengthNumber": ".1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2022-09-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220909",
"SamplePackage": "N",
"IndicationAndUsage": "Clonidine hydrochloride tablets USP are indicated in the treatment of hypertension. Clonidine hydrochloride tablets USP may be employed alone or concomitantly with other antihypertensive agents.",
"Description": "Clonidine hydrochloride is a centrally acting alpha-agonist hypotensive agent available as tablets for oral administration in three dosage strengths: 0.1 mg, 0.2 mg and 0.3 mg. The 0.1 mg tablet is equivalent to 0.087 mg of the free base. Clonidine hydrochloride tablets USP contain the following inactive ingredients: lactose, magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate. The 0.1 mg also contains D&C yellow #10 aluminum lake, and the 0.3 mg contains D&C yellow #10 aluminum lake and FD&C blue #1 aluminum lake. Clonidine hydrochloride is an imidazoline derivative and exists as a mesomeric compound. The chemical name is 2-(2,6-dichlorophenylamino)-2-imidazoline hydrochloride. The following is the structural formula. C 9H 9Cl 2N 3 HCl Mol. Wt. 266.56. Clonidine hydrochloride is an odorless, bitter, white, crystalline substance soluble in water and alcohol."
},
{
"NDCCode": "85766-283-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (85766-283-90) ",
"NDC11Code": "85766-0283-90",
"ProductNDC": "85766-283",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Chlorzoxazone",
"NonProprietaryName": "Chlorzoxazone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200803",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089853",
"LabelerName": "Sportpharm LLC",
"SubstanceName": "CHLORZOXAZONE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2026-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260929",
"SamplePackage": "N",
"IndicationAndUsage": "Chlorzoxazone is indicated as an adjunct to rest, physical therapy, and other measures for the relief of discomfort associated with acute, painful musculoskeletal conditions. The mode of action of this drug has not been clearly identified, but may be related to its sedative properties. Chlorzoxazone does not directly relax tense skeletal muscles in man.",
"Description": "Each 375 mg chlorzoxazone tablet contains: Chlorzoxazone USP 375 mg. Each 500 mg chlorzoxazone tablet contains: Chlorzoxazone USP 500 mg. Each 750 mg chlorzoxazone tablet contains: Chlorzoxazone USP 750 mg. Chemical Name: 5-Chloro-2-benzoxazolinone. Structural Formula. Molecular Formula: C 7H 4ClNO 2. Molecular Weight: 169.56. Chlorzoxazone, USP is a white or practically white, practically odorless, crystalline powder. Chlorzoxazone USP is slightly soluble in water; sparingly soluble in alcohol, in isopropyl alcohol, and in methanol; soluble in solutions of alkali hydroxides and ammonia. Inactive ingredients. 375 mg contains colloidal silicon dioxide, corn starch, croscarmellose sodium, docusate sodium with sodium benzoate, lactose monohydrate, magnesium stearate and microcrystalline cellulose. 500 mg contains D&C Red 27/Phloxine Aluminium lake, FD&C Yellow 6/Sunset Yellow FCF Aluminium lake, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polysorbate 80, pregelatinized starch, sodium starch glycolate. 750 mg contains colloidal silicon dioxide, corn starch, croscarmellose sodium, docusate sodium with sodium benzoate, lactose monohydrate, magnesium stearate and microcrystalline cellulose. Meets USP dissolution test 5 for 500 mg. FDA approved dissolution method differs from that of the USP for 375 mg and 750 mg."
},
{
"NDCCode": "76282-154-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (76282-154-90) ",
"NDC11Code": "76282-0154-90",
"ProductNDC": "76282-154",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrochlorothiazide",
"NonProprietaryName": "Hydrochlorothiazide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160830",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040907",
"LabelerName": "Exelan Pharmaceuticals Inc.",
"SubstanceName": "HYDROCHLOROTHIAZIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Active",
"LastUpdate": "2019-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160830",
"SamplePackage": "N",
"IndicationAndUsage": "Hydrochlorothiazide tablets are indicated as adjunctive therapy in edema associated with congestive heart failure, hepatic cirrhosis, and corticosteroid and estrogen therapy. Hydrochlorothiazide tablets have also been found useful in edema due to various forms of renal dysfunction such as nephrotic syndrome, acute glomerulonephritis, and chronic renal failure. Hydrochlorothiazide tablets are indicated in the management of hypertension either as the sole therapeutic agent or to enhance the effectiveness of other antihypertensive drugs in the more severe forms of hypertension.",
"Description": "Hydrochlorothiazide is a diuretic and antihypertensive. It is the 3,4-dihydro derivative of chlorothiazide. It is chemically designated as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide and has the following structural formula. Hydrochlorothiazide, USP is a white, or practically white, crystalline powder which is slightly soluble in water, freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; insoluble in ether, in chloroform, and in dilute mineral acids. Each tablet for oral administration contains 25 mg or 50 mg hydrochlorothiazide USP. In addition, each tablet contains the following inactive ingredients: corn starch, FD&C Yellow #6, dibasic calcium phosphate, pregelatinized starch, colloidal silicon dioxide, lactose monohydrate and magnesium stearate."
},
{
"NDCCode": "76282-155-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (76282-155-90) ",
"NDC11Code": "76282-0155-90",
"ProductNDC": "76282-155",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrochlorothiazide",
"NonProprietaryName": "Hydrochlorothiazide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160830",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040907",
"LabelerName": "Exelan Pharmaceuticals Inc.",
"SubstanceName": "HYDROCHLOROTHIAZIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Active",
"LastUpdate": "2019-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160830",
"SamplePackage": "N",
"IndicationAndUsage": "Hydrochlorothiazide tablets are indicated as adjunctive therapy in edema associated with congestive heart failure, hepatic cirrhosis, and corticosteroid and estrogen therapy. Hydrochlorothiazide tablets have also been found useful in edema due to various forms of renal dysfunction such as nephrotic syndrome, acute glomerulonephritis, and chronic renal failure. Hydrochlorothiazide tablets are indicated in the management of hypertension either as the sole therapeutic agent or to enhance the effectiveness of other antihypertensive drugs in the more severe forms of hypertension.",
"Description": "Hydrochlorothiazide is a diuretic and antihypertensive. It is the 3,4-dihydro derivative of chlorothiazide. It is chemically designated as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide and has the following structural formula. Hydrochlorothiazide, USP is a white, or practically white, crystalline powder which is slightly soluble in water, freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; insoluble in ether, in chloroform, and in dilute mineral acids. Each tablet for oral administration contains 25 mg or 50 mg hydrochlorothiazide USP. In addition, each tablet contains the following inactive ingredients: corn starch, FD&C Yellow #6, dibasic calcium phosphate, pregelatinized starch, colloidal silicon dioxide, lactose monohydrate and magnesium stearate."
},
{
"NDCCode": "76282-200-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (76282-200-90) ",
"NDC11Code": "76282-0200-90",
"ProductNDC": "76282-200",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fosinopril Sodium",
"NonProprietaryName": "Fosinopril Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20050621",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077222",
"LabelerName": "Exelan Pharmaceuticals, Inc.",
"SubstanceName": "FOSINOPRIL SODIUM",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-03-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20050621",
"SamplePackage": "N",
"IndicationAndUsage": "Fosinopril sodium tablets are indicated for the treatment of hypertension. It may be used alone or in combination with thiazide diuretics. Fosinopril sodium tablets are indicated in the management of heart failure as adjunctive therapy when added to conventional therapy including diuretics with or without digitalis (see DOSAGE AND ADMINISTRATION). In using fosinopril sodium, consideration should be given to the fact that another angiotensin converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen-vascular disease. Available data are insufficient to show that fosinopril sodium does not have a similar risk (see WARNINGS). In considering use of fosinopril sodium, it should be noted that in controlled trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks. In addition, ACE inhibitors (for which adequate data are available) cause a higher rate of angioedema in black than in non-black patients (see WARNINGS: Head and Neck Angioedema and Intestinal Angioedema).",
"Description": "Fosinopril sodium tablet, USP is the sodium salt of fosinopril USP, the ester prodrug of an angiotensin converting enzyme (ACE) inhibitor, fosinoprilat. It contains a phosphinate group capable of specific binding to the active site of angiotensin converting enzyme. Fosinopril sodium, USP is designated chemically as:L-proline,4-cyclohexyl-1-[[[2-methyl-1-(1-oxopropoxy)propoxy](4-phenylbutyl)phosphinyl]acetyl]-, sodium salt, trans-. Fosinopril sodium,USP is a white to off-white crystalline powder. It is soluble in water (100 mg/mL), methanol, and ethanol and slightly soluble in hexane. Its structural formula is. Its empirical formula is C30H45NNaO7P, and its molecular weight is 585.65. Fosinopril Sodium, USP is available for oral administrations as 10 mg, 20 mg, and 40 mg tablets. Inactive ingredients include: crospovidone, lactose, microcrystalline cellulose, magnesium stearate, and povidone."
},
{
"NDCCode": "76282-201-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (76282-201-90) ",
"NDC11Code": "76282-0201-90",
"ProductNDC": "76282-201",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fosinopril Sodium",
"NonProprietaryName": "Fosinopril Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20050621",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077222",
"LabelerName": "Exelan Pharmaceuticals, Inc.",
"SubstanceName": "FOSINOPRIL SODIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-03-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20050621",
"SamplePackage": "N",
"IndicationAndUsage": "Fosinopril sodium tablets are indicated for the treatment of hypertension. It may be used alone or in combination with thiazide diuretics. Fosinopril sodium tablets are indicated in the management of heart failure as adjunctive therapy when added to conventional therapy including diuretics with or without digitalis (see DOSAGE AND ADMINISTRATION). In using fosinopril sodium, consideration should be given to the fact that another angiotensin converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen-vascular disease. Available data are insufficient to show that fosinopril sodium does not have a similar risk (see WARNINGS). In considering use of fosinopril sodium, it should be noted that in controlled trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks. In addition, ACE inhibitors (for which adequate data are available) cause a higher rate of angioedema in black than in non-black patients (see WARNINGS: Head and Neck Angioedema and Intestinal Angioedema).",
"Description": "Fosinopril sodium tablet, USP is the sodium salt of fosinopril USP, the ester prodrug of an angiotensin converting enzyme (ACE) inhibitor, fosinoprilat. It contains a phosphinate group capable of specific binding to the active site of angiotensin converting enzyme. Fosinopril sodium, USP is designated chemically as:L-proline,4-cyclohexyl-1-[[[2-methyl-1-(1-oxopropoxy)propoxy](4-phenylbutyl)phosphinyl]acetyl]-, sodium salt, trans-. Fosinopril sodium,USP is a white to off-white crystalline powder. It is soluble in water (100 mg/mL), methanol, and ethanol and slightly soluble in hexane. Its structural formula is. Its empirical formula is C30H45NNaO7P, and its molecular weight is 585.65. Fosinopril Sodium, USP is available for oral administrations as 10 mg, 20 mg, and 40 mg tablets. Inactive ingredients include: crospovidone, lactose, microcrystalline cellulose, magnesium stearate, and povidone."
},
{
"NDCCode": "76282-202-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (76282-202-90) ",
"NDC11Code": "76282-0202-90",
"ProductNDC": "76282-202",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fosinopril Sodium",
"NonProprietaryName": "Fosinopril Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20050621",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077222",
"LabelerName": "Exelan Pharmaceuticals, Inc.",
"SubstanceName": "FOSINOPRIL SODIUM",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-03-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20050621",
"SamplePackage": "N",
"IndicationAndUsage": "Fosinopril sodium tablets are indicated for the treatment of hypertension. It may be used alone or in combination with thiazide diuretics. Fosinopril sodium tablets are indicated in the management of heart failure as adjunctive therapy when added to conventional therapy including diuretics with or without digitalis (see DOSAGE AND ADMINISTRATION). In using fosinopril sodium, consideration should be given to the fact that another angiotensin converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen-vascular disease. Available data are insufficient to show that fosinopril sodium does not have a similar risk (see WARNINGS). In considering use of fosinopril sodium, it should be noted that in controlled trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks. In addition, ACE inhibitors (for which adequate data are available) cause a higher rate of angioedema in black than in non-black patients (see WARNINGS: Head and Neck Angioedema and Intestinal Angioedema).",
"Description": "Fosinopril sodium tablet, USP is the sodium salt of fosinopril USP, the ester prodrug of an angiotensin converting enzyme (ACE) inhibitor, fosinoprilat. It contains a phosphinate group capable of specific binding to the active site of angiotensin converting enzyme. Fosinopril sodium, USP is designated chemically as:L-proline,4-cyclohexyl-1-[[[2-methyl-1-(1-oxopropoxy)propoxy](4-phenylbutyl)phosphinyl]acetyl]-, sodium salt, trans-. Fosinopril sodium,USP is a white to off-white crystalline powder. It is soluble in water (100 mg/mL), methanol, and ethanol and slightly soluble in hexane. Its structural formula is. Its empirical formula is C30H45NNaO7P, and its molecular weight is 585.65. Fosinopril Sodium, USP is available for oral administrations as 10 mg, 20 mg, and 40 mg tablets. Inactive ingredients include: crospovidone, lactose, microcrystalline cellulose, magnesium stearate, and povidone."
},
{
"NDCCode": "76282-206-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (76282-206-90) ",
"NDC11Code": "76282-0206-90",
"ProductNDC": "76282-206",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Citalopram Hydrobromide",
"NonProprietaryName": "Citalopram",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20121001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077534",
"LabelerName": "Exelan Pharmaceuticals Inc.",
"SubstanceName": "CITALOPRAM HYDROBROMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-11-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20170501",
"SamplePackage": "N"
},
{
"NDCCode": "76282-207-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (76282-207-90) ",
"NDC11Code": "76282-0207-90",
"ProductNDC": "76282-207",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Citalopram Hydrobromide",
"NonProprietaryName": "Citalopram",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20121001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077534",
"LabelerName": "Exelan Pharmaceuticals Inc.",
"SubstanceName": "CITALOPRAM HYDROBROMIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-11-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20170501",
"SamplePackage": "N"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>76282-283-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (76282-283-90) </PackageDescription>
<NDC11Code>76282-0283-90</NDC11Code>
<ProductNDC>76282-283</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250410</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090478</ApplicationNumber>
<LabelerName>EXELAN PHARMACEUTICALS, INC.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250410</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets,USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt with the empirical formula C20 H21 NHCl and a molecular weight of 311.9. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride, USP is designated chemically as 3-(5H –dibenzo[a,d]cyclohepten-5 ylidene)-N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets USP, 10 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry yellow (hypromellose 3cp, hypromellose 6cp, titanium dioxide, PEG 400, iron oxide yellow and polysorbate 80).</Description>
</NDC>
<NDC>
<NDCCode>76282-283-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (76282-283-10) </PackageDescription>
<NDC11Code>76282-0283-10</NDC11Code>
<ProductNDC>76282-283</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250410</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090478</ApplicationNumber>
<LabelerName>EXELAN PHARMACEUTICALS, INC.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250410</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets,USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt with the empirical formula C20 H21 NHCl and a molecular weight of 311.9. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride, USP is designated chemically as 3-(5H –dibenzo[a,d]cyclohepten-5 ylidene)-N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets USP, 10 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry yellow (hypromellose 3cp, hypromellose 6cp, titanium dioxide, PEG 400, iron oxide yellow and polysorbate 80).</Description>
</NDC>
<NDC>
<NDCCode>76282-283-18</NDCCode>
<PackageDescription>180 TABLET in 1 BOTTLE (76282-283-18) </PackageDescription>
<NDC11Code>76282-0283-18</NDC11Code>
<ProductNDC>76282-283</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250410</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090478</ApplicationNumber>
<LabelerName>EXELAN PHARMACEUTICALS, INC.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250410</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets,USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt with the empirical formula C20 H21 NHCl and a molecular weight of 311.9. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride, USP is designated chemically as 3-(5H –dibenzo[a,d]cyclohepten-5 ylidene)-N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets USP, 10 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry yellow (hypromellose 3cp, hypromellose 6cp, titanium dioxide, PEG 400, iron oxide yellow and polysorbate 80).</Description>
</NDC>
<NDC>
<NDCCode>76282-283-27</NDCCode>
<PackageDescription>270 TABLET in 1 BOTTLE (76282-283-27) </PackageDescription>
<NDC11Code>76282-0283-27</NDC11Code>
<ProductNDC>76282-283</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250410</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090478</ApplicationNumber>
<LabelerName>EXELAN PHARMACEUTICALS, INC.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250410</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets,USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt with the empirical formula C20 H21 NHCl and a molecular weight of 311.9. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride, USP is designated chemically as 3-(5H –dibenzo[a,d]cyclohepten-5 ylidene)-N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets USP, 10 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry yellow (hypromellose 3cp, hypromellose 6cp, titanium dioxide, PEG 400, iron oxide yellow and polysorbate 80).</Description>
</NDC>
<NDC>
<NDCCode>76282-283-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (76282-283-30) </PackageDescription>
<NDC11Code>76282-0283-30</NDC11Code>
<ProductNDC>76282-283</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250410</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090478</ApplicationNumber>
<LabelerName>EXELAN PHARMACEUTICALS, INC.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250410</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets,USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt with the empirical formula C20 H21 NHCl and a molecular weight of 311.9. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride, USP is designated chemically as 3-(5H –dibenzo[a,d]cyclohepten-5 ylidene)-N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets USP, 10 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry yellow (hypromellose 3cp, hypromellose 6cp, titanium dioxide, PEG 400, iron oxide yellow and polysorbate 80).</Description>
</NDC>
<NDC>
<NDCCode>76282-283-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (76282-283-60) </PackageDescription>
<NDC11Code>76282-0283-60</NDC11Code>
<ProductNDC>76282-283</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250410</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090478</ApplicationNumber>
<LabelerName>EXELAN PHARMACEUTICALS, INC.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250410</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets,USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt with the empirical formula C20 H21 NHCl and a molecular weight of 311.9. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride, USP is designated chemically as 3-(5H –dibenzo[a,d]cyclohepten-5 ylidene)-N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets USP, 10 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry yellow (hypromellose 3cp, hypromellose 6cp, titanium dioxide, PEG 400, iron oxide yellow and polysorbate 80).</Description>
</NDC>
<NDC>
<NDCCode>21695-283-90</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (21695-283-90)</PackageDescription>
<NDC11Code>21695-0283-90</NDC11Code>
<ProductNDC>21695-283</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Temazepam</ProprietaryName>
<NonProprietaryName>Temazepam</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19870421</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071457</ApplicationNumber>
<LabelerName>Rebel Distributors Corp</LabelerName>
<SubstanceName>TEMAZEPAM</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Temazepam Capsules, USP are indicated for the short-term treatment of insomnia (generally 7 to 10 days). For patients with short-term insomnia, instructions in the prescription should indicate that Temazepam Capsules should be used for short periods of time (7 to 10 days). The clinical trials performed in support of efficacy were 2 weeks in duration with the final formal assessment of sleep latency performed at the end of treatment.</IndicationAndUsage>
<Description>Temazepam is a benzodiazepine hypnotic agent. The chemical name is 7-chloro 1,3-dihydro-3-hydroxyl-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one, and the structural formula is. C. 16. H. 13. ClN. 2. O. 2. MW = 300.74. Temazepam is a white, crystalline substance, very slightly soluble in water and sparingly soluble in alcohol USP. Temazepam capsules, 15 mg and 30 mg, are for oral administration. 15 mg and 30 mg Capsules. Active Ingredient: temazepam USP. 15 mg Capsules. Inactive Ingredients:. Corn starch, lactose anhydrous, magnesium stearate, sodium lauryl sulfate, FD&C Blue #1, FD&C yellow # 5, FD&C yellow # 6, gelatin and titanium dioxide. May also include:. benzyl alcohol, butylparaben, sodium lauryl sulfate, edetate calcium disodium, methylparaben, propyl paraben and sodium propionate. Imprinting ink may contain ammonium hydroxide, ethanol, 2-propanol, butanol, pharmaceutical shellac, potassium hydroxide, propylene glycol, black iron oxide, and other ingredents. 30 mg Capsules. Inactive Ingredients. Corn starch, lactose anhydrous, magnesium stearate, sodium lauryl sulfate, gelatin and titanium dioxide. May also include:. benzyl alcohol, butylparaben, sodium lauryl sulfate, edetate calcium disodium, methylparaben, propyl paraben and sodium propionate. Imprinting ink may contain ammonium hydroxide, ethanol, 2-propanol, butanol, pharmaceutical shellac, potassium hydroxide, propylene glycol, black iron oxide, and other ingredents.</Description>
</NDC>
<NDC>
<NDCCode>33342-283-10</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (33342-283-10) </PackageDescription>
<NDC11Code>33342-0283-10</NDC11Code>
<ProductNDC>33342-283</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine,valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Amlodipine,valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250106</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207299</ApplicationNumber>
<LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE; VALSARTAN; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>5; 160; 12.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250106</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amlodipine, valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including amlodipine, hydrochlorothiazide, and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with amlodipine, valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Limitation of Use Amlodipine, valsartan and hydrochlorothiazide tablet is not indicated for the initial therapy of hypertension [see Dosage and Administration (2)].</IndicationAndUsage>
<Description>Amlodipine, valsartan and hydrochlorothiazide tablets, USP are a fixed combination of amlodipine, valsartan, and hydrochlorothiazide. Amlodipine, valsartan and hydrochlorothiazide tablets, USP contains the besylate salt of amlodipine, a dihydropyridine calcium channel blocker (CCB). Amlodipine besylate, USP is a white to pale yellow crystalline powder, slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate’s chemical name is 3-Ethyl 5-methyl (±)-2-[(2-aminoethoxy)methyl]-4(o-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulfonate ; its structural formula is. Its molecular formula is C20H25ClN2O5.C6H6O3S and its molecular weight is 567.1. Valsartan, USP is a nonpeptide, orally active, and specific angiotensin II antagonist acting on the AT1 receptor subtype. Valsartan is a white to practically white fine powder, soluble in ethanol and methanol and slightly soluble in water. Valsartan’s chemical name is N-(1-oxopentyl)-N-[[2´-(1H-tetrazol-5-yl) [1,1´-biphenyl]-4yl]methyl]-L-valine; its structural formula is. Its molecular formula is C24H29N5O3 and its molecular weight is 435.5. Hydrochlorothiazide, USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its molecular formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Amlodipine, valsartan and hydrochlorothiazide film-coated tablets, USP are formulated in 5 strengths for oral administration with a combination of amlodipine besylate, valsartan, and hydrochlorothiazide, providing for the following available combinations. 5/160/12.5 mg, 10/160/12.5 mg, 5/160/25 mg, 10/160/25 mg, and 10/320/25 mg amlodipine besylate/valsartan/hydrochlorothiazide. The inactive ingredients for all strengths of the tablets include colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc. Additionally, the 5/160/12.5 mg strength contains titanium dioxide; the 10/160/12.5 mg strength contains titanium dioxide and yellow and red iron oxides; the 5/160/25 mg strength contains titanium dioxide and yellow iron oxide, and the 10/160/25 mg and 10/320/25 mg strengths both contain yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>43547-283-09</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (43547-283-09) </PackageDescription>
<NDC11Code>43547-0283-09</NDC11Code>
<ProductNDC>43547-283</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Telmisartan</ProprietaryName>
<NonProprietaryName>Telmisartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170820</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207882</ApplicationNumber>
<LabelerName>Solco Healthcare US, LLC</LabelerName>
<SubstanceName>TELMISARTAN</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170820</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Telmisartan is an angiotensin II receptor blocker (ARB) indicated for: 1 Treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1), 2 Cardiovascular (CV) risk reduction in patients unable to take ACE inhibitors (1.2).</IndicationAndUsage>
<Description>Telmisartan is a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C33H30N4O2, its molecular weight is 514.63, and its structural formula is. Telmisartan is a white to slightly yellowish solid. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan tablets USP, are available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan, USP. The tablets contain the following inactive ingredients: magnesium stearate, mannitol, meglumine, povidone, and sodium hydroxide. Telmisartan tablets are hygroscopic and require protection from moisture.</Description>
</NDC>
<NDC>
<NDCCode>51655-283-26</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE, DISPENSING (51655-283-26)</PackageDescription>
<NDC11Code>51655-0283-26</NDC11Code>
<ProductNDC>51655-283</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Warfarin Sodium</ProprietaryName>
<NonProprietaryName>Warfarin Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150310</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040663</ApplicationNumber>
<LabelerName>Northwind Pharmaceuticals, LLC</LabelerName>
<SubstanceName>WARFARIN SODIUM</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Vitamin K Antagonist [EPC],Vitamin K Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Warfarin sodium tablets,USP are indicated for. Prophylaxis and treatment of venous thrombosis and its extension, pulmonary embolism (PE).Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation (AF) and/or cardiac valve replacement.Reduction in the risk of death, recurrent myocardial infarction (MI), and thromboembolic events such as stroke or systemic embolization after myocardial infarction. Limitations of Use. Warfarin sodium tablets, USP have no direct effect on an established thrombus, nor does it reverse ischemic tissue damage. Once a thrombus has occurred, however, the goals of anticoagulant treatment are to prevent further extension of the formed clot and to prevent secondary thromboembolic complications that may result in serious and possibly fatal sequelae.</IndicationAndUsage>
<Description>Warfarin sodium is an anticoagulant that acts by inhibiting vitamin K-dependent coagulation factors. Chemically, it is 3-(α-acetonylbenzyl)-4-hydroxycoumarin and is a racemic mixture of the R- and S-enantiomers. Crystalline warfarin sodium is an isopropanol clathrate. Its molecular formula is C19H15NaO4. Warfarin sodium, USP is a white crystalline powder. It is very soluble in water. Each warfarin sodium tablet intended for oral administration contains warfarin sodium clathrates equivalent to 1 mg or 2 mg or 2.5 mg or 3 mg or 4 mg or 5 mg or 6 mg or 7.5 mg or 10 mg of warfarin sodium. In addition each tablet contains the inactive ingredients hydroxypropyl cellulose, lactose monohydrate, magnesium stearate and pregelatinized starch. Additionally each 1 mg tablet contains D&C red no. 6 barium lake, 2 mg tablet contains FD&C blue no. 2 aluminum lake and FD&C red no. 40 aluminum lake, 2.5 mg tablet contains D&C yellow no. 10 aluminum lake and FD&C blue no. 1 aluminum lake, 3 mg tablet contains FD&C yellow no. 6 aluminum lake, FD&C blue no. 2 aluminum lake and FD&C red no. 40 aluminum lake, 4 mg tablet contains FD&C blue no. 1 aluminum lake, 5 mg tablet contains FD&C yellow no. 6 aluminum lake, 6 mg tablet contains FD&C yellow no. 6 aluminum lake and FD&C blue no. 1 aluminum lake, 7.5 mg tablet contains D&C yellow no. 10 aluminum lake and FD&C yellow no.6 aluminum lake and 10 mg tablet is dye free.</Description>
</NDC>
<NDC>
<NDCCode>53217-283-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (53217-283-90)</PackageDescription>
<NDC11Code>53217-0283-90</NDC11Code>
<ProductNDC>53217-283</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisinopril</ProprietaryName>
<NonProprietaryName>Lisinopril</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060113</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077321</ApplicationNumber>
<LabelerName>Aidarex Pharmaceuticals LLC</LabelerName>
<SubstanceName>LISINOPRIL</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Lisinopril tablet USP is an angiotensin converting enzyme (ACE) inhibitor indicated for: 1 Treatment of hypertension in adults and pediatric patients 6 years of age and older (1.1), 2 Adjunct therapy for heart failure (1.2), 3 Treatment of Acute Myocardial Infarction (1.3).</IndicationAndUsage>
<Description>Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O52H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets USP are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets - colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, pre-gelatinized starch and starch (corn). 5 mg, 10 mg, 20 mg and 30 mg tablets – colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, red ferric oxide, pre-gelatinized starch and starch (corn). 40 mg tablets - colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, yellow ferric oxide, pre-gelatinized starch and starch (corn).</Description>
</NDC>
<NDC>
<NDCCode>59746-283-90</NDCCode>
<PackageDescription>90 TABLET, DELAYED RELEASE in 1 BOTTLE (59746-283-90) </PackageDescription>
<NDC11Code>59746-0283-90</NDC11Code>
<ProductNDC>59746-283</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pantoprazole Sodium</ProprietaryName>
<NonProprietaryName>Pantoprazole Sodium</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090901</ApplicationNumber>
<LabelerName>Jubilant Cadista Pharmaceuticals Inc.</LabelerName>
<SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC],Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-10-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>61786-283-19</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (61786-283-19)</PackageDescription>
<NDC11Code>61786-0283-19</NDC11Code>
<ProductNDC>61786-283</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fenofibrate</ProprietaryName>
<NonProprietaryName>Fenofibrate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150429</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076635</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>FENOFIBRATE</SubstanceName>
<StrengthNumber>160</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Peroxisome Proliferator Receptor alpha Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-11-20</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>63187-283-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (63187-283-90) </PackageDescription>
<NDC11Code>63187-0283-90</NDC11Code>
<ProductNDC>63187-283</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Topiramate</ProprietaryName>
<NonProprietaryName>Topiramate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090327</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077627</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>TOPIRAMATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-09-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Topiramate tablets USP are an antiepileptic (AED) agent indicated for: 1 Monotherapy epilepsy: Initial monotherapy in patients ≥10 years of age with partial onset or primary generalized tonic-clonic seizures (1.1), 2 Adjunctive therapy epilepsy: Adjunctive therapy for adults and pediatric patients (2 to 16 years of age) with partial onset seizures or primary generalized tonic-clonic seizures, and in patients ≥2 years of age with seizures associated with Lennox-Gastaut syndrome (LGS) (1.2).</IndicationAndUsage>
<Description>Topiramate USP is a sulfamate-substituted monosaccharide. Topiramate Tablets USP are available as 25 mg, 50 mg, 100 mg, and 200 mg round tablets for oral administration. Topiramate USP is a white to off white powder. It is freely soluble in dichloromethane. Topiramate USP has the molecular formula C12H21NO8S and a molecular weight of 339.37. Topiramate USP is designated chemically as 2,3:4,5-Di-O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula. Topiramate tablets USP contain the following inactive ingredients: lactose monohydrate, pregelatinized starch, microcrystalline cellulose, sodium starch glycolate, magnesium stearate, purified water, hypromellose, titanium dioxide, polyethylene glycol, and polysorbate 80. The 50 mg tablets also contain iron oxide yellow and FD&C yellow# 6 for color. The 100 mg and 200 mg tablets also contain iron oxide red and iron oxide yellow for color.</Description>
</NDC>
<NDC>
<NDCCode>65162-283-09</NDCCode>
<PackageDescription>90 TABLET, EXTENDED RELEASE in 1 BOTTLE (65162-283-09) </PackageDescription>
<NDC11Code>65162-0283-09</NDC11Code>
<ProductNDC>65162-283</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Paliperidone</ProprietaryName>
<NonProprietaryName>Paliperidone</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190924</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204707</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>PALIPERIDONE</SubstanceName>
<StrengthNumber>9</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190924</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Paliperidone extended-release tablets contains paliperidone USP, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. Paliperidone, USP contains a racemic mixture of (+)- and (-)- paliperidone. The chemical name is (±)-3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-9-hydroxy-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O3 and its molecular weight is 426.49. The structural formula is. Paliperidone, USP is sparingly soluble in 0.1N HCl and methylene chloride; practically insoluble in water, 0.1N NaOH, and hexane; and slightly soluble in N,N-dimethylformamide. Paliperidone extended-release tablets are intended for oral administration and are available in 1.5 mg (brown), 3 mg (white), 6 mg (light beige), and 9 mg (pink) strengths. Inactive ingredients are colloidal silicon dioxide, fumaric acid, hypromellose, lactose monohydrate, macrogol, magnesium stearate, methacrylic acid copolymer, microcrystalline cellulose, polyethylene oxides, povidone, talc and triethyl citrate. The 1.5 mg tablets also contain iron oxide black, iron oxide red and iron oxide yellow. The 6 mg tablets also contain iron oxide red and iron oxide yellow. The 9 mg tablets also contain iron oxide black, iron oxide red and iron oxide yellow. Delivery System Components and Performance. Paliperidone extended-release tablets use a hydrophilic matrix core and pH dependent enteric coating to deliver paliperidone, USP at a controlled rate. The delivery system consists of an inner core composed of the drug, rate controlling polymers and other excipients. The core is coated with multiple layers comprising of delayed release polymer and a drug layering polymer system. Each tablet strength has a different colored coating. In an aqueous environment, such as the gastrointestinal tract, the water-dispersible overcoat erodes quickly. The combination of the coating layers ensures an initial drug release, while delaying exposure of the matrix core. Upon attaining the intended pH, the delayed release coating dissolves, the hydrophilic polymers of the core hydrate and swell forming a gel like barrier that regulates the rate at which the drug is released from the tablet, ensuring a steady and prolonged delivery.</Description>
</NDC>
<NDC>
<NDCCode>68382-283-16</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (68382-283-16) </PackageDescription>
<NDC11Code>68382-0283-16</NDC11Code>
<ProductNDC>68382-283</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200212</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203000</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>VALSARTAN; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>320; 25</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC],Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-10-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>69452-283-19</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (69452-283-19) > 90 CAPSULE, LIQUID FILLED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>69452-0283-19</NDC11Code>
<ProductNDC>69452-283</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Loratadine</ProprietaryName>
<NonProprietaryName>Loratadine</NonProprietaryName>
<DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200320</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202538</ApplicationNumber>
<LabelerName>Bionpharma Inc.</LabelerName>
<SubstanceName>LORATADINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose, 2 itchy, watery eyes, 3 sneezing, 4 itching of the nose or throat.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>71205-283-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (71205-283-90) </PackageDescription>
<NDC11Code>71205-0283-90</NDC11Code>
<ProductNDC>71205-283</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluconazole</ProprietaryName>
<NonProprietaryName>Fluconazole</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170406</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208963</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>FLUCONAZOLE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-03-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluconazole tablets are indicated for the treatment of: : 1 1.Vaginal candidiasis (vaginal yeast infections due to Candida)., 2 2.Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole tablets were also effective for the treatment of Candida urinary tract infections, peritonitis, and systemic Candida infections including candidemia, disseminated candidiasis, and pneumonia., 3 3.Cryptococcal meningitis. Before prescribing fluconazole tablets for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIES section. Studies comparing fluconazole tablets to amphotericin B in non-HIV infected patients have not been conducted.</IndicationAndUsage>
<Description>Fluconazole, the first of a new subclass of synthetic triazole antifungal agents, is available as tablets for oral administration. Fluconazole is designated chemically as 2,4-difluoro-α,α1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with an molecular formula of C13H12F2N6O and molecular weight of 306.3. The structural formula is. Fluconazole USP is a white or almost white crystalline powder which is freely soluble in methanol, soluble in alcohol and in acetone, sparingly soluble in isopropanol and in chloroform, slightly soluble in water, very slightly soluble in toluene. Each fluconazole tablet, USP intended for oral administration contains 50 mg, 100 mg, 150 mg, or 200 mg of fluconazole USP. In addition, each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, fd&c red no. 40 aluminum lake, magnesium stearate, microcrystalline cellulose and povidone. Fluconazole tablet meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>71610-283-60</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (71610-283-60) </PackageDescription>
<NDC11Code>71610-0283-60</NDC11Code>
<ProductNDC>71610-283</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Celecoxib</ProprietaryName>
<NonProprietaryName>Celecoxib</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141210</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020998</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>CELECOXIB</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190524</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Celecoxib is indicated.</IndicationAndUsage>
<Description>Celecoxib capsule is a nonsteroidal anti-inflammatory drug, available as capsules containing 50 mg, 100 mg, 200 mg and 400 mg celecoxib for oral administration. The chemical name is 4-[5-(4-methylphenyl)- 3-(trifluoromethyl)-1H-pyrazol-1-yl] benzenesulfonamide and is a diaryl-substituted pyrazole. The molecular weight is 381.38. Its molecular formula is C17H14F3N3O2S, and it has the following chemical structure. Celecoxib is a white to off-white powder with a pKa of 11.1 (sulfonamide moiety). Celecoxib is hydrophobic (log P is 3.5) and is practically insoluble in aqueous media at physiological pH range. The inactive ingredients in Celecoxib include: croscarmellose sodium, edible inks, gelatin, lactose monohydrate, magnesium stearate, povidone and sodium lauryl sulfate.</Description>
</NDC>
<NDC>
<NDCCode>72189-283-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (72189-283-90) </PackageDescription>
<NDC11Code>72189-0283-90</NDC11Code>
<ProductNDC>72189-283</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211019</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208170</ApplicationNumber>
<LabelerName>DirectRx</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211019</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets should be used only for short periods (up to 2 or 3 weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a tricyclic amine salt which is white to off white, odourless, crystalline powder with the molecular formula C 20H 21N HCl and a molecular weight of 311.9. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water, in alcohol and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride, insoluble in n-hexane. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-(5H -dibenzo[a,d] cyclohepten-5-ylidene)- N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Image Cyclobenzaprine hydrochloride tablets, USP are available as 5 mg, 7.5 mg and 10 mg tablets for oral administration. Each 5 mg, 7.5 mg and 10 mg tablet contains cyclobenzaprine hydrochloride and the following inactive ingredients: crospovidone, hypromellose, lactose anhydrous, macrogol, magnesium stearate, polysorbate 80, pregelatinized starch, silicified microcrystalline cellulose, titanium dioxide. The tablets of 5 mg and 10 mg also contain D&C Yellow #10 Aluminum Lake and FD&C Yellow #6 Sunset Yellow FCF Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue #2/INDIGO Carmine Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>72603-283-01</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (72603-283-01) </PackageDescription>
<NDC11Code>72603-0283-01</NDC11Code>
<ProductNDC>72603-283</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214344</ApplicationNumber>
<LabelerName>NorthStar RxLLC</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated: To reduce the risk of: o Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHD o MI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHD o Non-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: o Adults with primary hyperlipidemia. o Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH). As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH). As an adjunct to diet for the treatment of adults with: o Primary dysbetalipoproteinemia o Hypertriglyceridemia.</IndicationAndUsage>
<Description>Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is 1 H-Pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)- β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino) carbonyl]-, calcium salt (2:1), [R-(R*, R*)] trihydrate. The molecular formula of atorvastatin calcium is (C 33H 34FN 2O 5) 2Ca 2+3H 2O and its molecular weight is 1209.42. Its structural formula is:. Atorvastatin calcium, USP is a white to off-white powder. Atorvastatin calcium is very slightly soluble in pH 1.2, pH 4.5 and pH 6.8 buffers; freely soluble in methanol; slightly soluble in ethanol; practically insoluble in acetonitrile. Atorvastatin Calcium Tablets, USP for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.825 mg, 21.649 mg, 43.299 mg or 86.579 mg atorvastatin calcium trihydrate, USP) and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polysorbate 80 and film coating contains hypromellose, polyethylene glycol, talc and titanium dioxide. USP dissolution test is pending.</Description>
</NDC>
<NDC>
<NDCCode>76420-283-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (76420-283-90) </PackageDescription>
<NDC11Code>76420-0283-90</NDC11Code>
<ProductNDC>76420-283</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clonidine Hydrochloride</ProprietaryName>
<NonProprietaryName>Clonidine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA070925</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>CLONIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-09-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220909</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clonidine hydrochloride tablets USP are indicated in the treatment of hypertension. Clonidine hydrochloride tablets USP may be employed alone or concomitantly with other antihypertensive agents.</IndicationAndUsage>
<Description>Clonidine hydrochloride is a centrally acting alpha-agonist hypotensive agent available as tablets for oral administration in three dosage strengths: 0.1 mg, 0.2 mg and 0.3 mg. The 0.1 mg tablet is equivalent to 0.087 mg of the free base. Clonidine hydrochloride tablets USP contain the following inactive ingredients: lactose, magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate. The 0.1 mg also contains D&C yellow #10 aluminum lake, and the 0.3 mg contains D&C yellow #10 aluminum lake and FD&C blue #1 aluminum lake. Clonidine hydrochloride is an imidazoline derivative and exists as a mesomeric compound. The chemical name is 2-(2,6-dichlorophenylamino)-2-imidazoline hydrochloride. The following is the structural formula. C 9H 9Cl 2N 3 HCl Mol. Wt. 266.56. Clonidine hydrochloride is an odorless, bitter, white, crystalline substance soluble in water and alcohol.</Description>
</NDC>
<NDC>
<NDCCode>85766-283-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (85766-283-90) </PackageDescription>
<NDC11Code>85766-0283-90</NDC11Code>
<ProductNDC>85766-283</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Chlorzoxazone</ProprietaryName>
<NonProprietaryName>Chlorzoxazone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200803</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089853</ApplicationNumber>
<LabelerName>Sportpharm LLC</LabelerName>
<SubstanceName>CHLORZOXAZONE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260929</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Chlorzoxazone is indicated as an adjunct to rest, physical therapy, and other measures for the relief of discomfort associated with acute, painful musculoskeletal conditions. The mode of action of this drug has not been clearly identified, but may be related to its sedative properties. Chlorzoxazone does not directly relax tense skeletal muscles in man.</IndicationAndUsage>
<Description>Each 375 mg chlorzoxazone tablet contains: Chlorzoxazone USP 375 mg. Each 500 mg chlorzoxazone tablet contains: Chlorzoxazone USP 500 mg. Each 750 mg chlorzoxazone tablet contains: Chlorzoxazone USP 750 mg. Chemical Name: 5-Chloro-2-benzoxazolinone. Structural Formula. Molecular Formula: C 7H 4ClNO 2. Molecular Weight: 169.56. Chlorzoxazone, USP is a white or practically white, practically odorless, crystalline powder. Chlorzoxazone USP is slightly soluble in water; sparingly soluble in alcohol, in isopropyl alcohol, and in methanol; soluble in solutions of alkali hydroxides and ammonia. Inactive ingredients. 375 mg contains colloidal silicon dioxide, corn starch, croscarmellose sodium, docusate sodium with sodium benzoate, lactose monohydrate, magnesium stearate and microcrystalline cellulose. 500 mg contains D&C Red 27/Phloxine Aluminium lake, FD&C Yellow 6/Sunset Yellow FCF Aluminium lake, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polysorbate 80, pregelatinized starch, sodium starch glycolate. 750 mg contains colloidal silicon dioxide, corn starch, croscarmellose sodium, docusate sodium with sodium benzoate, lactose monohydrate, magnesium stearate and microcrystalline cellulose. Meets USP dissolution test 5 for 500 mg. FDA approved dissolution method differs from that of the USP for 375 mg and 750 mg.</Description>
</NDC>
<NDC>
<NDCCode>76282-154-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (76282-154-90) </PackageDescription>
<NDC11Code>76282-0154-90</NDC11Code>
<ProductNDC>76282-154</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160830</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040907</ApplicationNumber>
<LabelerName>Exelan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2019-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160830</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydrochlorothiazide tablets are indicated as adjunctive therapy in edema associated with congestive heart failure, hepatic cirrhosis, and corticosteroid and estrogen therapy. Hydrochlorothiazide tablets have also been found useful in edema due to various forms of renal dysfunction such as nephrotic syndrome, acute glomerulonephritis, and chronic renal failure. Hydrochlorothiazide tablets are indicated in the management of hypertension either as the sole therapeutic agent or to enhance the effectiveness of other antihypertensive drugs in the more severe forms of hypertension.</IndicationAndUsage>
<Description>Hydrochlorothiazide is a diuretic and antihypertensive. It is the 3,4-dihydro derivative of chlorothiazide. It is chemically designated as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide and has the following structural formula. Hydrochlorothiazide, USP is a white, or practically white, crystalline powder which is slightly soluble in water, freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; insoluble in ether, in chloroform, and in dilute mineral acids. Each tablet for oral administration contains 25 mg or 50 mg hydrochlorothiazide USP. In addition, each tablet contains the following inactive ingredients: corn starch, FD&C Yellow #6, dibasic calcium phosphate, pregelatinized starch, colloidal silicon dioxide, lactose monohydrate and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>76282-155-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (76282-155-90) </PackageDescription>
<NDC11Code>76282-0155-90</NDC11Code>
<ProductNDC>76282-155</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160830</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040907</ApplicationNumber>
<LabelerName>Exelan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2019-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160830</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydrochlorothiazide tablets are indicated as adjunctive therapy in edema associated with congestive heart failure, hepatic cirrhosis, and corticosteroid and estrogen therapy. Hydrochlorothiazide tablets have also been found useful in edema due to various forms of renal dysfunction such as nephrotic syndrome, acute glomerulonephritis, and chronic renal failure. Hydrochlorothiazide tablets are indicated in the management of hypertension either as the sole therapeutic agent or to enhance the effectiveness of other antihypertensive drugs in the more severe forms of hypertension.</IndicationAndUsage>
<Description>Hydrochlorothiazide is a diuretic and antihypertensive. It is the 3,4-dihydro derivative of chlorothiazide. It is chemically designated as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide and has the following structural formula. Hydrochlorothiazide, USP is a white, or practically white, crystalline powder which is slightly soluble in water, freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; insoluble in ether, in chloroform, and in dilute mineral acids. Each tablet for oral administration contains 25 mg or 50 mg hydrochlorothiazide USP. In addition, each tablet contains the following inactive ingredients: corn starch, FD&C Yellow #6, dibasic calcium phosphate, pregelatinized starch, colloidal silicon dioxide, lactose monohydrate and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>76282-200-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (76282-200-90) </PackageDescription>
<NDC11Code>76282-0200-90</NDC11Code>
<ProductNDC>76282-200</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fosinopril Sodium</ProprietaryName>
<NonProprietaryName>Fosinopril Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050621</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077222</ApplicationNumber>
<LabelerName>Exelan Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>FOSINOPRIL SODIUM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-03-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050621</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fosinopril sodium tablets are indicated for the treatment of hypertension. It may be used alone or in combination with thiazide diuretics. Fosinopril sodium tablets are indicated in the management of heart failure as adjunctive therapy when added to conventional therapy including diuretics with or without digitalis (see DOSAGE AND ADMINISTRATION). In using fosinopril sodium, consideration should be given to the fact that another angiotensin converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen-vascular disease. Available data are insufficient to show that fosinopril sodium does not have a similar risk (see WARNINGS). In considering use of fosinopril sodium, it should be noted that in controlled trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks. In addition, ACE inhibitors (for which adequate data are available) cause a higher rate of angioedema in black than in non-black patients (see WARNINGS: Head and Neck Angioedema and Intestinal Angioedema).</IndicationAndUsage>
<Description>Fosinopril sodium tablet, USP is the sodium salt of fosinopril USP, the ester prodrug of an angiotensin converting enzyme (ACE) inhibitor, fosinoprilat. It contains a phosphinate group capable of specific binding to the active site of angiotensin converting enzyme. Fosinopril sodium, USP is designated chemically as:L-proline,4-cyclohexyl-1-[[[2-methyl-1-(1-oxopropoxy)propoxy](4-phenylbutyl)phosphinyl]acetyl]-, sodium salt, trans-. Fosinopril sodium,USP is a white to off-white crystalline powder. It is soluble in water (100 mg/mL), methanol, and ethanol and slightly soluble in hexane. Its structural formula is. Its empirical formula is C30H45NNaO7P, and its molecular weight is 585.65. Fosinopril Sodium, USP is available for oral administrations as 10 mg, 20 mg, and 40 mg tablets. Inactive ingredients include: crospovidone, lactose, microcrystalline cellulose, magnesium stearate, and povidone.</Description>
</NDC>
<NDC>
<NDCCode>76282-201-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (76282-201-90) </PackageDescription>
<NDC11Code>76282-0201-90</NDC11Code>
<ProductNDC>76282-201</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fosinopril Sodium</ProprietaryName>
<NonProprietaryName>Fosinopril Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050621</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077222</ApplicationNumber>
<LabelerName>Exelan Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>FOSINOPRIL SODIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-03-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050621</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fosinopril sodium tablets are indicated for the treatment of hypertension. It may be used alone or in combination with thiazide diuretics. Fosinopril sodium tablets are indicated in the management of heart failure as adjunctive therapy when added to conventional therapy including diuretics with or without digitalis (see DOSAGE AND ADMINISTRATION). In using fosinopril sodium, consideration should be given to the fact that another angiotensin converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen-vascular disease. Available data are insufficient to show that fosinopril sodium does not have a similar risk (see WARNINGS). In considering use of fosinopril sodium, it should be noted that in controlled trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks. In addition, ACE inhibitors (for which adequate data are available) cause a higher rate of angioedema in black than in non-black patients (see WARNINGS: Head and Neck Angioedema and Intestinal Angioedema).</IndicationAndUsage>
<Description>Fosinopril sodium tablet, USP is the sodium salt of fosinopril USP, the ester prodrug of an angiotensin converting enzyme (ACE) inhibitor, fosinoprilat. It contains a phosphinate group capable of specific binding to the active site of angiotensin converting enzyme. Fosinopril sodium, USP is designated chemically as:L-proline,4-cyclohexyl-1-[[[2-methyl-1-(1-oxopropoxy)propoxy](4-phenylbutyl)phosphinyl]acetyl]-, sodium salt, trans-. Fosinopril sodium,USP is a white to off-white crystalline powder. It is soluble in water (100 mg/mL), methanol, and ethanol and slightly soluble in hexane. Its structural formula is. Its empirical formula is C30H45NNaO7P, and its molecular weight is 585.65. Fosinopril Sodium, USP is available for oral administrations as 10 mg, 20 mg, and 40 mg tablets. Inactive ingredients include: crospovidone, lactose, microcrystalline cellulose, magnesium stearate, and povidone.</Description>
</NDC>
<NDC>
<NDCCode>76282-202-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (76282-202-90) </PackageDescription>
<NDC11Code>76282-0202-90</NDC11Code>
<ProductNDC>76282-202</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fosinopril Sodium</ProprietaryName>
<NonProprietaryName>Fosinopril Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050621</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077222</ApplicationNumber>
<LabelerName>Exelan Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>FOSINOPRIL SODIUM</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-03-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050621</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fosinopril sodium tablets are indicated for the treatment of hypertension. It may be used alone or in combination with thiazide diuretics. Fosinopril sodium tablets are indicated in the management of heart failure as adjunctive therapy when added to conventional therapy including diuretics with or without digitalis (see DOSAGE AND ADMINISTRATION). In using fosinopril sodium, consideration should be given to the fact that another angiotensin converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen-vascular disease. Available data are insufficient to show that fosinopril sodium does not have a similar risk (see WARNINGS). In considering use of fosinopril sodium, it should be noted that in controlled trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks. In addition, ACE inhibitors (for which adequate data are available) cause a higher rate of angioedema in black than in non-black patients (see WARNINGS: Head and Neck Angioedema and Intestinal Angioedema).</IndicationAndUsage>
<Description>Fosinopril sodium tablet, USP is the sodium salt of fosinopril USP, the ester prodrug of an angiotensin converting enzyme (ACE) inhibitor, fosinoprilat. It contains a phosphinate group capable of specific binding to the active site of angiotensin converting enzyme. Fosinopril sodium, USP is designated chemically as:L-proline,4-cyclohexyl-1-[[[2-methyl-1-(1-oxopropoxy)propoxy](4-phenylbutyl)phosphinyl]acetyl]-, sodium salt, trans-. Fosinopril sodium,USP is a white to off-white crystalline powder. It is soluble in water (100 mg/mL), methanol, and ethanol and slightly soluble in hexane. Its structural formula is. Its empirical formula is C30H45NNaO7P, and its molecular weight is 585.65. Fosinopril Sodium, USP is available for oral administrations as 10 mg, 20 mg, and 40 mg tablets. Inactive ingredients include: crospovidone, lactose, microcrystalline cellulose, magnesium stearate, and povidone.</Description>
</NDC>
<NDC>
<NDCCode>76282-206-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (76282-206-90) </PackageDescription>
<NDC11Code>76282-0206-90</NDC11Code>
<ProductNDC>76282-206</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Citalopram Hydrobromide</ProprietaryName>
<NonProprietaryName>Citalopram</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077534</ApplicationNumber>
<LabelerName>Exelan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>CITALOPRAM HYDROBROMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-11-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>76282-207-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (76282-207-90) </PackageDescription>
<NDC11Code>76282-0207-90</NDC11Code>
<ProductNDC>76282-207</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Citalopram Hydrobromide</ProprietaryName>
<NonProprietaryName>Citalopram</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077534</ApplicationNumber>
<LabelerName>Exelan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>CITALOPRAM HYDROBROMIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-11-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
</NDCList>