{
"NDC": [
{
"NDCCode": "76420-268-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (76420-268-90) ",
"NDC11Code": "76420-0268-90",
"ProductNDC": "76420-268",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20210720",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071611",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2022-09-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220903",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt. It has a melting point of 217°C, and a pK a of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl, USP is designated chemically as 3-(5 H- dibenzo[a,d]cyclohepten-5-ylidene)- N , N -dimethyl-1- propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine Hydrochloride Tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide."
},
{
"NDCCode": "76420-268-01",
"PackageDescription": "1 TABLET, FILM COATED in 1 BOTTLE (76420-268-01) ",
"NDC11Code": "76420-0268-01",
"ProductNDC": "76420-268",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20210720",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071611",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2022-09-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220903",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt. It has a melting point of 217°C, and a pK a of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl, USP is designated chemically as 3-(5 H- dibenzo[a,d]cyclohepten-5-ylidene)- N , N -dimethyl-1- propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine Hydrochloride Tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide."
},
{
"NDCCode": "76420-268-02",
"PackageDescription": "2 TABLET, FILM COATED in 1 BOTTLE (76420-268-02) ",
"NDC11Code": "76420-0268-02",
"ProductNDC": "76420-268",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20210720",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071611",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2022-09-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220903",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt. It has a melting point of 217°C, and a pK a of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl, USP is designated chemically as 3-(5 H- dibenzo[a,d]cyclohepten-5-ylidene)- N , N -dimethyl-1- propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine Hydrochloride Tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide."
},
{
"NDCCode": "76420-268-07",
"PackageDescription": "7 TABLET, FILM COATED in 1 BOTTLE (76420-268-07) ",
"NDC11Code": "76420-0268-07",
"ProductNDC": "76420-268",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20210720",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071611",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2022-09-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220903",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt. It has a melting point of 217°C, and a pK a of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl, USP is designated chemically as 3-(5 H- dibenzo[a,d]cyclohepten-5-ylidene)- N , N -dimethyl-1- propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine Hydrochloride Tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide."
},
{
"NDCCode": "76420-268-10",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (76420-268-10) ",
"NDC11Code": "76420-0268-10",
"ProductNDC": "76420-268",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20210720",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071611",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2022-09-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220903",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt. It has a melting point of 217°C, and a pK a of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl, USP is designated chemically as 3-(5 H- dibenzo[a,d]cyclohepten-5-ylidene)- N , N -dimethyl-1- propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine Hydrochloride Tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide."
},
{
"NDCCode": "76420-268-15",
"PackageDescription": "15 TABLET, FILM COATED in 1 BOTTLE (76420-268-15) ",
"NDC11Code": "76420-0268-15",
"ProductNDC": "76420-268",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20210720",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071611",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2022-09-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220903",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt. It has a melting point of 217°C, and a pK a of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl, USP is designated chemically as 3-(5 H- dibenzo[a,d]cyclohepten-5-ylidene)- N , N -dimethyl-1- propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine Hydrochloride Tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide."
},
{
"NDCCode": "76420-268-20",
"PackageDescription": "20 TABLET, FILM COATED in 1 BOTTLE (76420-268-20) ",
"NDC11Code": "76420-0268-20",
"ProductNDC": "76420-268",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20210720",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071611",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2022-09-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220903",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt. It has a melting point of 217°C, and a pK a of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl, USP is designated chemically as 3-(5 H- dibenzo[a,d]cyclohepten-5-ylidene)- N , N -dimethyl-1- propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine Hydrochloride Tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide."
},
{
"NDCCode": "76420-268-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (76420-268-30) ",
"NDC11Code": "76420-0268-30",
"ProductNDC": "76420-268",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20210720",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071611",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2022-09-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220903",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt. It has a melting point of 217°C, and a pK a of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl, USP is designated chemically as 3-(5 H- dibenzo[a,d]cyclohepten-5-ylidene)- N , N -dimethyl-1- propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine Hydrochloride Tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide."
},
{
"NDCCode": "76420-268-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (76420-268-60) ",
"NDC11Code": "76420-0268-60",
"ProductNDC": "76420-268",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20210720",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071611",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2022-09-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220903",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt. It has a melting point of 217°C, and a pK a of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl, USP is designated chemically as 3-(5 H- dibenzo[a,d]cyclohepten-5-ylidene)- N , N -dimethyl-1- propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine Hydrochloride Tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide."
},
{
"NDCCode": "31722-268-90",
"PackageDescription": "24 BOTTLE in 1 CASE (31722-268-90) > 90 TABLET in 1 BOTTLE",
"NDC11Code": "31722-0268-90",
"ProductNDC": "31722-268",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Quinapril",
"NonProprietaryName": "Quinapril",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120120",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078457",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "QUINAPRIL HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Hypertension. Quinapril is indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with quinapril. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Quinapril may be used alone or in combination with thiazide diuretics. Heart FailureQuinapril is indicated in the management of heart failure as adjunctive therapy when added to conventional therapy including diuretics and/or digitalis.In using quinapril, consideration should be given to the fact that another angiotensin-converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease.Available data are insufficient to show that quinapril does not have a similar risk (see WARNINGS). Angioedema in black patients: Black patients receiving ACE inhibitor monotherapy have been reported to have a higher incidence of angioedema compared to non-blacks. It should also be noted that in controlled clinical trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks.",
"Description": "Quinapril hydrochloride USP is the hydrochloride salt of quinapril, the ethyl ester of a non-sulfhydryl, angiotensin-converting enzyme (ACE) inhibitor, quinaprilat. Quinapril hydrochloride USP is chemically described as [3S-[2[R*(R*)], 3R*]]-2-[2-[[1(ethoxycarbonyl)-3-phenylpropyl]amino]-1-oxopropyl]-1 ,2,3,4-tetrahydro-3-isoquinolinecarboxylic acid, monohydrochloride. Its empirical formula is C2SH30N20S -HCl and its structural formula is. Quinapril hydrochloride USP is a white to off-white amorphous powder that is freely soluble in aqueous solvents. Quinapril Tablets USP contain quinapril hydrochloride equivalent to 5 mg, 10 mg, 20 mg, or 40 mg of quinapril for oral administration. Each tablet also contains lactose monohydrate, magnesium carbonate, magnesium stearate, crospovidone, povidone and opadry brown (hypromellose, titanium dioxide, iron oxide and macrogol)."
},
{
"NDCCode": "42291-268-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (42291-268-90) ",
"NDC11Code": "42291-0268-90",
"ProductNDC": "42291-268",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Entacapone",
"NonProprietaryName": "Entacapone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20140620",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020796",
"LabelerName": "AvKARE, Inc.",
"SubstanceName": "ENTACAPONE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Catechol O-Methyltransferase Inhibitors [MoA],Catechol-O-Methyltransferase Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-09-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20140620",
"SamplePackage": "N"
},
{
"NDCCode": "51407-268-90",
"PackageDescription": "90 TABLET, EXTENDED RELEASE in 1 BOTTLE (51407-268-90) ",
"NDC11Code": "51407-0268-90",
"ProductNDC": "51407-268",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Niacin",
"NonProprietaryName": "Niacin",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20170616",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203899",
"LabelerName": "Golden State Medical Supply, Inc.",
"SubstanceName": "NIACIN",
"StrengthNumber": "1000",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nicotinic Acid [EPC], Nicotinic Acids [CS]",
"Status": "Active",
"LastUpdate": "2026-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190705",
"SamplePackage": "N",
"IndicationAndUsage": "Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hyperlipidemia. Niacin therapy is indicated as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. 1. Niacin extended-release tablets are indicated to reduce elevated TC, LDL-C, Apo B and TG levels, and to increase HDL-C in patients with primary hyperlipidemia and mixed dyslipidemia. 2. In patients with a history of myocardial infarction and hyperlipidemia, niacin is indicated to reduce the risk of recurrent nonfatal myocardial infarction. 3. In patients with a history of coronary artery disease (CAD) and hyperlipidemia, niacin, in combination with a bile acid binding resin, is indicated to slow progression or promote regression of atherosclerotic disease. 4. Niacin extended-release tablets in combination with a bile acid binding resin is indicated to reduce elevated TC and LDL-C levels in adult patients with primary hyperlipidemia. 5. Niacin is also indicated as adjunctive therapy for treatment of adult patients with severe hypertriglyceridemia who present a risk of pancreatitis and who do not respond adequately to a determined dietary effort to control them. Limitations of Use. Addition of niacin extended-release tablets did not reduce cardiovascular morbidity or mortality among patients treated with simvastatin in a large, randomized controlled trial (AIM-HIGH) [see Warnings and Precautions ( 5.1)] .",
"Description": "Niacin Extended-release Tablets, USP (niacin tablet, film-coated extended-release), contain niacin, which at therapeutic doses is an antihyperlipidemic agent. Niacin (nicotinic acid, or 3-pyridinecarboxylic acid) is a white, crystalline powder, very soluble in water, with the following structural formula. Niacin extended-release tablets are unscored, red, film-coated tablets for oral administration and are available in two tablet strengths containing 500 and 1000 mg niacin. Niacin extended-release tablets also contain the inactive ingredients black iron oxide, colloidal silicon dioxide, hydroxypropyl cellulose, lecithin, polyethylene glycol, polyvinyl alcohol, red iron oxide, sodium stearyl fumarate, talc, titanium dioxide, and yellow iron oxide. USP Dissolution Test 5."
},
{
"NDCCode": "53217-268-90",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (53217-268-90)",
"NDC11Code": "53217-0268-90",
"ProductNDC": "53217-268",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gabapentin",
"NonProprietaryName": "Gabapentin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20110129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090858",
"LabelerName": "Aidarex Pharmaceuticals LLC",
"SubstanceName": "GABAPENTIN",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Gabapentin is indicated for: 1 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy.",
"Description": "The active ingredient in gabapentin capsules is gabapentin, which has the chemical name 1-(aminomethyl) cyclohexaneacetic acid. The molecular formula of gabapentin is C9H17NO2 and the molecular weight is 171.24. The structural formula of gabapentin is. Gabapentin is a white to off-white crystalline solid with a pKa1 of 3.7 and a pKa2 of 10.7. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.25. Each gabapentin capsule contains 100 mg, 300 mg, or 400 mg of gabapentin and the following inactive ingredients: anhydrous lactose, cornstarch, and talc. The 100 mg capsule shell contains gelatin, sodium lauryl sulfate, and titanium dioxide. The 300 mg capsule shell contains gelatin, sodium lauryl sulfate, titanium dioxide, and yellow iron oxide. The 400 mg capsule shell contains gelatin, sodium lauryl sulfate, red iron oxide, titanium dioxide, and yellow iron oxide. The imprinting ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propyl glycol, strong ammonia solution, and titanium dioxide."
},
{
"NDCCode": "55111-268-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (55111-268-90) ",
"NDC11Code": "55111-0268-90",
"ProductNDC": "55111-268",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Simvastatin",
"NonProprietaryName": "Simvastatin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20061220",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077752",
"LabelerName": "Dr. Reddy's Laboratories Limited",
"SubstanceName": "SIMVASTATIN",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20061220",
"SamplePackage": "N",
"IndicationAndUsage": "Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is indicated as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. In patients with coronary heart disease (CHD) or at high risk of CHD, simvastatin can be started simultaneously with diet.",
"Description": "Simvastatin USP is a lipid-lowering agent that is derived synthetically from a fermentation product of Aspergillus terreus. After oral ingestion, simvastatin USP, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate-limiting step in the biosynthesis of cholesterol. Simvastatin USP is butanoic acid, 2,2-dimethyl-,1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4- hydroxy-6-oxo-2H-pyran-2-yl)-ethyl]-1-naphthalenyl ester, [1S-[1α,3α,7β,8β(2S*,4S*),-8aβ]]. The empirical formula of simvastatin USP is C25H38O5 and its molecular weight is 418.57. Its structural formula is. Simvastatin USP is a white to off-white powder. Practically insoluble in water, freely soluble in chloroform, in alcohol, and in methanol. Sparingly soluble in propylene glycol, very slightly soluble in hexane. Simvastatin tablets USP for oral administration contain either 5 mg, 10 mg, 20 mg, 40 mg or 80 mg of simvastatin and the following inactive ingredients: ascorbic acid, butylated hydroxy anisole, citric acid anhydrous, hydroxypropyl cellulose, hypromellose, iron oxide black, iron oxide red, iron oxide yellow, isopropyl alcohol, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch (corn starch), and titanium dioxide."
},
{
"NDCCode": "55289-268-90",
"PackageDescription": "90 TABLET in 1 BOTTLE, PLASTIC (55289-268-90)",
"NDC11Code": "55289-0268-90",
"ProductNDC": "55289-268",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"NonProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100218",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040748",
"LabelerName": "PD-Rx Pharmaceuticals, Inc.",
"SubstanceName": "ACETAMINOPHEN; HYDROCODONE BITARTRATE",
"StrengthNumber": "500; 7.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC],Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2014-08-29"
},
{
"NDCCode": "67544-268-60",
"PackageDescription": "90 CAPSULE, GELATIN COATED in 1 BOTTLE, PLASTIC (67544-268-60) ",
"NDC11Code": "67544-0268-60",
"ProductNDC": "67544-268",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxazepam",
"NonProprietaryName": "Oxazepam",
"DosageFormName": "CAPSULE, GELATIN COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA072252",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "OXAZEPAM",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20070123",
"SamplePackage": "N",
"IndicationAndUsage": "Oxazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. Anxiety associated with depression is also responsive to Oxazepam therapy. This product has been found particularly useful in the management of anxiety, tension, agitation, and irritability in older patients. Alcoholics with acute tremulousness, inebriation, or with anxiety, associated with alcohol withdrawal are responsive to therapy. The effectiveness of Oxazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Oxazepam is the first of a chemical series of compounds known as the 3-hydroxybenzodiazepinones. A therapeutic agent providing versatility and flexibility in control of common emotional disturbances, this product exerts prompt action in a wide variety of disorders associated with anxiety, tension, agitation, and irritability, and anxiety associated with depression. In tolerance and toxicity studies on several animal species, this product reveals significantly greater safety factors than related compounds (chlordiazepoxide and diazepam) and manifests a wide separation of effective doses and doses inducing side effects. Oxazepam capsules contain 10 mg, 15 mg or 30 mg oxazepam. The following inactive ingredients are contained in these capsules: corn starch, croscarmellose sodium, FD&C Red #40, gelatin, hypromellose, lactose (monohydrate), magnesium stearate, methylparaben, propylparaben, sodium lauryl sulfate, titanium dioxide, and other inert ingredients. The 10 mg capsule also contains D&C Red #28. The 15 mg capsule also contains D&C Yellow #10. The 30 mg capsule also contains D&C Red #28 and FD&C Blue #1. Oxazepam is 7-chloro-1,3-dihydro-3-hydroxy-5-phenyl-2H-1,4-benzodiazepin-2-one. A white crystalline powder with a molecular weight of 286.72, its structural formula is as follows."
},
{
"NDCCode": "70934-268-90",
"PackageDescription": "90 TABLET in 1 BOTTLE, PLASTIC (70934-268-90) ",
"NDC11Code": "70934-0268-90",
"ProductNDC": "70934-268",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tizanidine",
"NonProprietaryName": "Tizanidine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190215",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076416",
"LabelerName": "Denton Pharma, Inc. DBA Northwind Pharmaceuticals",
"SubstanceName": "TIZANIDINE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20190401",
"SamplePackage": "N"
},
{
"NDCCode": "71205-268-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (71205-268-90) ",
"NDC11Code": "71205-0268-90",
"ProductNDC": "71205-268",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tadalafil",
"NonProprietaryName": "Tadalafil",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190327",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209167",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "TADALAFIL",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-04-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190501",
"SamplePackage": "N",
"IndicationAndUsage": "Tadalafil is a phosphodiesterase 5 (PDE5) inhibitor indicated for the treatment of: : 1 erectile dysfunction (ED) ( 1.1) , 2 the signs and symptoms of benign prostatic hyperplasia (BPH) ( 1.2) , 3 ED and the signs and symptoms of BPH (ED/BPH) ( 1.3) .",
"Description": "Tadalafil is a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type 5 (PDE5). Tadalafil has the empirical formula C 22H 19N 3O 4 representing a molecular weight of 389.41. The structural formula is:. The chemical designation is pyrazino[1´,2´:1,6]pyrido[3,4-b]indole-1,4-dione, 6-(1,3-benzodioxol-5-yl)-2,3,6,7,12,12a-hexahydro-2-methyl-, (6R,12aR)-. It is a crystalline solid that is practically insoluble in water and very slightly soluble in ethanol. Tadalafil tablets, USP are available as almond-shaped, biconvex, film coated tablets in different sizes and different shades of yellow for oral administration. Each tablet contains 2.5 mg, 5 mg, or 20 mg of tadalafil and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, sorbitan monostearate, magnesium stearate, hypromellose, iron oxide red (in 2.5 mg tablets only), iron oxide yellow, talc, titanium dioxide, and triacetin."
},
{
"NDCCode": "71610-268-60",
"PackageDescription": "90 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (71610-268-60) ",
"NDC11Code": "71610-0268-60",
"ProductNDC": "71610-268",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Verapamil Hydrochloride",
"NonProprietaryName": "Verapamil Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20090917",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078906",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "VERAPAMIL HYDROCHLORIDE",
"StrengthNumber": "240",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2019-05-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190501",
"SamplePackage": "N",
"IndicationAndUsage": "Verapamil hydrochloride extended-release tablets USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including this drug. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy.",
"Description": "Verapamil hydrochloride extended-release tablets USP are calcium ion influx inhibitor (slow channel blocker or calcium ion antagonist). Verapamil hydrochloride extended-release tablets USP are available for oral administration as brown colored, oval, biconvex, film-coated tablets containing 120 mg verapamil hydrochloride USP, as brown colored, oval, biconvex, film-coated tablets containing 180 mg verapamil hydrochloride USP, and as brown colored, oval, biconvex, film-coated tablets containing 240 mg verapamil hydrochloride USP. The tablets are designed for sustained release of the drug in the gastrointestinal tract; sustained-release characteristics are not altered when the tablet is divided in half. The structural formula of verapamil HCl USP is given below. C27H38N2O4·HCl..........M.W. 491.06. Benzeneacetonitrile, α[3-[[2-(3,4-dimethoxyphenyl)ethyl]methylamino]propyl]-3,4- dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil HCl USP is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform and methanol. Verapamil HCl USP is not chemically related to other cardioactive drugs. In addition to verapamil HCl USP, the verapamil hydrochloride extended-release tablets USP contain the following ingredients: colloidal silicon dioxide, sodium alginate, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyethylene glycol and titanium dioxide. The following are the color additives per tablet strength. Verapamil hydrochloride extended-release tablets USP, 120 mg, 180 mg and 240 mg meet USP Dissolution Test 1."
},
{
"NDCCode": "72865-268-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (72865-268-90) ",
"NDC11Code": "72865-0268-90",
"ProductNDC": "72865-268",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Quetiapine Fumarate",
"NonProprietaryName": "Quetiapine Fumarate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240202",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204316",
"LabelerName": "XLCare Pharmaceuticals Inc.",
"SubstanceName": "QUETIAPINE FUMARATE",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240722",
"SamplePackage": "N",
"IndicationAndUsage": "Quetiapine tablets are an atypical antipsychotic indicated for the treatment of: 1 Schizophrenia ( 1.1) , 2 Bipolar I disorder manic episodes ( 1.2) , 3 Bipolar disorder, depressive episodes ( 1.2) .",
"Description": "Quetiapine is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-Dibenzo [ b,f] [1,4]thiazepin-11-yl-1-piperazinyl)-ethoxy] ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is (C 21H 25N 3O 2S) 2. C 4H 4O 4and it has a molecular weight of 883.1 (fumarate salt). The structural formula is:. Quetiapine fumarate USP is a white to off-white crystalline powder which is sparingly soluble in 0.1N hydrochloric acid, slightly soluble in water, in anhydrous ethanol and in methanol. Quetiapine tablets USP are supplied for oral administration as 25 mg (round, peach), 50 mg (round, white), 100 mg (round, yellow), 200 mg (round, white), 300 mg (capsule-shaped, white), and 400 mg (capsule-shaped, yellow) tablets. Inactive ingredients are dibasic calcium phosphate dihydrate, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, sodium starch glycolate and titanium dioxide. The 25 mg tablets contain red iron oxide and yellow iron oxide and the 100 mg and 400 mg tablets contain only yellow iron oxide. Each 25 mg tablet contains 28.78 mg of quetiapine fumarate USP equivalent to 25 mg quetiapine. Each 50 mg tablet contains 57.56 mg of quetiapine fumarate USP equivalent to 50 mg quetiapine. Each 100 mg tablet contains 115.13 mg of quetiapine fumarate USP equivalent to 100 mg quetiapine. Each 200 mg tablet contains 230.24 mg of quetiapine fumarate USP equivalent to 200 mg quetiapine. Each 300 mg tablet contains 345.36 mg of quetiapine fumarate USP equivalent to 300 mg quetiapine. Each 400 mg tablet contains 460.48 mg of quetiapine fumarate USP equivalent to 400 mg quetiapine."
},
{
"NDCCode": "76420-009-90",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (76420-009-90) ",
"NDC11Code": "76420-0009-90",
"ProductNDC": "76420-009",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Celecoxib",
"NonProprietaryName": "Celecoxib",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20160316",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204590",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "CELECOXIB",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2023-09-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230902",
"SamplePackage": "N",
"IndicationAndUsage": "Celecoxib capsules are indicated.",
"Description": "Celecoxib is a nonsteroidal anti-inflammatory drug, available as capsules containing 200 mg celecoxib USP for oral administration. The chemical name is 4-[5-(4-methylphenyl)-3-(trifluoromethyl)-1H-pyrazol-1-yl] benzenesulfonamide and is a diaryl-substituted pyrazole. The molecular weight is 381.38. Its molecular formula is C 17H 14F 3N 3O 2S, and it has the following chemical structure:. Celecoxib USP is a white to off-white powder with a pKa of 11.1 (sulfonamide moiety). Celecoxib USP is hydrophobic (log P is 3.5) and is practically insoluble in aqueous media at physiological pH range. The inactive ingredients in celecoxib capsules include: gelatin, lactose monohydrate, magnesium stearate, povidone, sodium lauryl sulfate, hydroxypropyl cellulose, crospovidone and titanium dioxide. The imprinting ink of capsule shell of the 200 mg capsule contains the following inactive ingredients: shellac, propylene glycol, strong ammonia solution and yellow iron oxide."
},
{
"NDCCode": "76420-010-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (76420-010-90) ",
"NDC11Code": "76420-0010-90",
"ProductNDC": "76420-010",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170928",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078722",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2024-05-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221021",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white to off-white crystalline powder with the molecular formula C 20H 21NHCl and a molecular weight of 311.9. It has a melting point of 217° C, and a pK aof 8.47 at 25° C. It is freely soluble in water, in alcohol and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride and insoluble in hydrocarbons. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-(5H-dibenzo[a,d] cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine hydrochloride tablets, USP are supplied as 7.5 mg tablets for oral administration. Cyclobenzaprine hydrochloride 7.5 mg tablets contain the following inactive ingredients: corn starch, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, pregelatinized starch, talc and titanium dioxide."
},
{
"NDCCode": "76420-011-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (76420-011-90) ",
"NDC11Code": "76420-0011-90",
"ProductNDC": "76420-011",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170531",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208170",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220810",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets should be used only for short periods (up to 2 or 3 weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a tricyclic amine salt which is white to off white, odourless, crystalline powder with the molecular formula C 20H 21N HCl and a molecular weight of 311.9. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water, in alcohol and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride, insoluble in n-hexane. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-(5H -dibenzo[a,d] cyclohepten-5-ylidene)- N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine hydrochloride tablets, USP are available as 10 mg tablets for oral administration. Each 10 mg tablet contains cyclobenzaprine hydrochloride and the following inactive ingredients: crospovidone, D&C Yellow #10 Aluminum Lake, FD&C Yellow #6 Sunset Yellow FCF Aluminum Lake, hypromellose, lactose anhydrous, macrogol, magnesium stearate, polysorbate 80, pregelatinized starch, silicified microcrystalline cellulose, titanium dioxide."
},
{
"NDCCode": "76420-015-90",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (76420-015-90) ",
"NDC11Code": "76420-0015-90",
"ProductNDC": "76420-015",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gabapentin",
"NonProprietaryName": "Gabapentin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20140403",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075350",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "GABAPENTIN",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2022-10-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200123",
"SamplePackage": "N",
"IndicationAndUsage": "Gabapentin capsules are indicated for: 1 Management of postherpetic neuralgia in adults, 2 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy.",
"Description": "The active ingredient in gabapentin capsules, USP is gabapentin, USP which has the chemical name 1-(aminomethyl)cyclohexaneacetic acid. The molecular formula of gabapentin, USP is C 9H 17NO 2 and the molecular weight is 171.24. The structural formula of gabapentin, USP is:. Gabapentin, USP is a white to off-white crystalline solid with a pK a1 of 3.7 and a pK a2 of 10.7. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is -1.25. Each gabapentin capsule contains 100 mg, or 300 mg of gabapentin, USP and the following inactive ingredients: black iron oxide, corn starch, D&C Yellow #10 aluminum lake, FD&C blue #1 aluminum lake, FD&C blue #2 aluminum lake, FD&C red #40 aluminum lake, gelatin, mannitol, pharmaceutical glaze, propylene glycol, red iron oxide T3469, silicon dioxide, sodium lauryl sulfate, synthetic black iron oxide, talc, titanium dioxide, and yellow iron oxide T3506."
},
{
"NDCCode": "76420-019-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (76420-019-90) ",
"NDC11Code": "76420-0019-90",
"ProductNDC": "76420-019",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180116",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078722",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200604",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white to off-white crystalline powder with the molecular formula C 20H 21NHCl and a molecular weight of 311.9. It has a melting point of 217° C, and a pK a of 8.47 at 25° C. It is freely soluble in water, in alcohol and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride and insoluble in hydrocarbons. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-( 5H-dibenzo[ a,d] cyclohepten-5-ylidene)- N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine hydrochloride tablets, USP are supplied as a 7.5 mg tablets for oral administration. Cyclobenzaprine hydrochloride 7.5 mg tablets contain the following inactive ingredients: corn starch, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, pregelatinized starch, talc and titanium dioxide."
},
{
"NDCCode": "76420-020-90",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (76420-020-90) ",
"NDC11Code": "76420-0020-90",
"ProductNDC": "76420-020",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gabapentin",
"NonProprietaryName": "Gabapentin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20171205",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090705",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "GABAPENTIN",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2020-06-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200610",
"SamplePackage": "N",
"IndicationAndUsage": "Gabapentin capsules are indicated for: 1 Management of postherpetic neuralgia in adults, 2 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy.",
"Description": "The active ingredient in gabapentin capsules is gabapentin, USP which has the chemical name 1-(aminomethyl) cyclohexane acetic acid. The molecular formula of gabapentin is C 9H 17NO 2 and the molecular weight is 171.24. The structural formula of gabapentin is:. Gabapentin, USP is a white to off-white crystalline solid with a pK a1 of 3.7 and a pK a2 of 10.7. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.25. Gabapentin Capsules, USP are supplied as imprinted hard gelatin capsules containing 300 mg of gabapentin, USP. The inactive ingredients are mannitol, pre-gelatinized starch and talc. The 300 mg capsule contains FD&C Red 40, D&C Yellow 10 and titanium dioxide."
},
{
"NDCCode": "76420-021-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (76420-021-90) ",
"NDC11Code": "76420-0021-90",
"ProductNDC": "76420-021",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170410",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040275",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191216",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol tablets are indicated in the: 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause. , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. , 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. , 4 Treatment of breast cancer (for palliation only) in appropriately selected women and men with metastatic disease. , 5 Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only). , 6 Prevention of osteoporosis. When prescribing solely for the prevention of postmenopausal osteoporosis, therapy should only be considered for women at significant risk of osteoporosis and for whom non-estrogen medications are not considered to be appropriate (See CLINICAL PHARMACOLOGY, Clinical Studies). .",
"Description": "Estradiol tablets, USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white, crystalline solid, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is. In addition, each tablet for oral administration contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate."
},
{
"NDCCode": "76420-022-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (76420-022-90) ",
"NDC11Code": "76420-0022-90",
"ProductNDC": "76420-022",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170410",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040275",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191216",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol tablets are indicated in the: 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause. , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. , 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. , 4 Treatment of breast cancer (for palliation only) in appropriately selected women and men with metastatic disease. , 5 Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only). , 6 Prevention of osteoporosis. When prescribing solely for the prevention of postmenopausal osteoporosis, therapy should only be considered for women at significant risk of osteoporosis and for whom non-estrogen medications are not considered to be appropriate (See CLINICAL PHARMACOLOGY, Clinical Studies). .",
"Description": "Estradiol tablets, USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white, crystalline solid, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is. In addition, each tablet for oral administration contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate."
},
{
"NDCCode": "76420-023-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (76420-023-90) ",
"NDC11Code": "76420-0023-90",
"ProductNDC": "76420-023",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170410",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040275",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191216",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol tablets are indicated in the: 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause. , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. , 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. , 4 Treatment of breast cancer (for palliation only) in appropriately selected women and men with metastatic disease. , 5 Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only). , 6 Prevention of osteoporosis. When prescribing solely for the prevention of postmenopausal osteoporosis, therapy should only be considered for women at significant risk of osteoporosis and for whom non-estrogen medications are not considered to be appropriate (See CLINICAL PHARMACOLOGY, Clinical Studies). .",
"Description": "Estradiol tablets, USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white, crystalline solid, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is. In addition, each tablet for oral administration contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate."
},
{
"NDCCode": "76420-024-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (76420-024-90) ",
"NDC11Code": "76420-0024-90",
"ProductNDC": "76420-024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eszopiclone",
"NonProprietaryName": "Eszopiclone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150131",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202929",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "ESZOPICLONE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200617",
"SamplePackage": "N",
"IndicationAndUsage": "Eszopiclone tablets are indicated for the treatment of insomnia. In controlled outpatient and sleep laboratory studies, eszopiclone tablets administered at bedtime decreased sleep latency and improved sleep maintenance. The clinical trials performed in support of efficacy were up to 6 months in duration. The final formal assessments of sleep latency and maintenance were performed at 4 weeks in the 6-week study (adults only), at the end of both 2-week studies (elderly only) and at the end of the 6-month study (adults only).",
"Description": "Eszopiclone, USP is a nonbenzodiazepine hypnotic agent that is a pyrrolopyrazine derivative of the cyclopyrrolone class. The chemical name of eszopiclone is (+)-(5S)-6-(5chloropyridin-2-yl)-7-oxo-6,7-dihydro-5H-pyrrolo[3,4-b] pyrazin-5-yl 4-methylpiperazine-1carboxylate. Its molecular weight is 388.81, and its empirical formula is C 17H 17C lN 6O 3. Eszopiclone, USP has a single chiral center with an (S)-configuration. It has the following chemical structure:. Eszopiclone, USP is a white to light-yellow crystalline solid. Eszopiclone is very slightly soluble in water, slightly soluble in ethanol, and soluble in phosphate buffer (pH 3.2). Eszopiclone, USP is formulated as film-coated tablets for oral administration. Eszopiclone tablets, USP contain 1 mg, 2 mg, or 3 mg eszopiclone, USP and the following inactive ingredients: dibasic calcium phosphate dihydrate, colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide, and triacetin. In addition, both the 1 mg and 3 mg tablets contain FD&C Blue #2."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>76420-268-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (76420-268-90) </PackageDescription>
<NDC11Code>76420-0268-90</NDC11Code>
<ProductNDC>76420-268</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210720</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071611</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-09-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220903</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt. It has a melting point of 217°C, and a pK a of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl, USP is designated chemically as 3-(5 H- dibenzo[a,d]cyclohepten-5-ylidene)- N , N -dimethyl-1- propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine Hydrochloride Tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>76420-268-01</NDCCode>
<PackageDescription>1 TABLET, FILM COATED in 1 BOTTLE (76420-268-01) </PackageDescription>
<NDC11Code>76420-0268-01</NDC11Code>
<ProductNDC>76420-268</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210720</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071611</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-09-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220903</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt. It has a melting point of 217°C, and a pK a of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl, USP is designated chemically as 3-(5 H- dibenzo[a,d]cyclohepten-5-ylidene)- N , N -dimethyl-1- propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine Hydrochloride Tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>76420-268-02</NDCCode>
<PackageDescription>2 TABLET, FILM COATED in 1 BOTTLE (76420-268-02) </PackageDescription>
<NDC11Code>76420-0268-02</NDC11Code>
<ProductNDC>76420-268</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210720</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071611</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-09-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220903</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt. It has a melting point of 217°C, and a pK a of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl, USP is designated chemically as 3-(5 H- dibenzo[a,d]cyclohepten-5-ylidene)- N , N -dimethyl-1- propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine Hydrochloride Tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>76420-268-07</NDCCode>
<PackageDescription>7 TABLET, FILM COATED in 1 BOTTLE (76420-268-07) </PackageDescription>
<NDC11Code>76420-0268-07</NDC11Code>
<ProductNDC>76420-268</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210720</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071611</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-09-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220903</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt. It has a melting point of 217°C, and a pK a of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl, USP is designated chemically as 3-(5 H- dibenzo[a,d]cyclohepten-5-ylidene)- N , N -dimethyl-1- propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine Hydrochloride Tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>76420-268-10</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (76420-268-10) </PackageDescription>
<NDC11Code>76420-0268-10</NDC11Code>
<ProductNDC>76420-268</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210720</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071611</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-09-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220903</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt. It has a melting point of 217°C, and a pK a of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl, USP is designated chemically as 3-(5 H- dibenzo[a,d]cyclohepten-5-ylidene)- N , N -dimethyl-1- propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine Hydrochloride Tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>76420-268-15</NDCCode>
<PackageDescription>15 TABLET, FILM COATED in 1 BOTTLE (76420-268-15) </PackageDescription>
<NDC11Code>76420-0268-15</NDC11Code>
<ProductNDC>76420-268</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210720</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071611</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-09-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220903</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt. It has a melting point of 217°C, and a pK a of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl, USP is designated chemically as 3-(5 H- dibenzo[a,d]cyclohepten-5-ylidene)- N , N -dimethyl-1- propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine Hydrochloride Tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>76420-268-20</NDCCode>
<PackageDescription>20 TABLET, FILM COATED in 1 BOTTLE (76420-268-20) </PackageDescription>
<NDC11Code>76420-0268-20</NDC11Code>
<ProductNDC>76420-268</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210720</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071611</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-09-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220903</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt. It has a melting point of 217°C, and a pK a of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl, USP is designated chemically as 3-(5 H- dibenzo[a,d]cyclohepten-5-ylidene)- N , N -dimethyl-1- propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine Hydrochloride Tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>76420-268-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (76420-268-30) </PackageDescription>
<NDC11Code>76420-0268-30</NDC11Code>
<ProductNDC>76420-268</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210720</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071611</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-09-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220903</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt. It has a melting point of 217°C, and a pK a of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl, USP is designated chemically as 3-(5 H- dibenzo[a,d]cyclohepten-5-ylidene)- N , N -dimethyl-1- propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine Hydrochloride Tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>76420-268-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (76420-268-60) </PackageDescription>
<NDC11Code>76420-0268-60</NDC11Code>
<ProductNDC>76420-268</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210720</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071611</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-09-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220903</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine HCl is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt. It has a melting point of 217°C, and a pK a of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl, USP is designated chemically as 3-(5 H- dibenzo[a,d]cyclohepten-5-ylidene)- N , N -dimethyl-1- propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine Hydrochloride Tablets, USP are available for oral administration as 5 mg, 7.5 mg and 10 mg tablets. Cyclobenzaprine hydrochloride 5 mg, 7.5 mg and 10 mg tablets contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate, hydroxypropyl cellulose, hypromellose, polyethylene glycol, magnesium stearate, microcrystalline cellulose, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>31722-268-90</NDCCode>
<PackageDescription>24 BOTTLE in 1 CASE (31722-268-90) > 90 TABLET in 1 BOTTLE</PackageDescription>
<NDC11Code>31722-0268-90</NDC11Code>
<ProductNDC>31722-268</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Quinapril</ProprietaryName>
<NonProprietaryName>Quinapril</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120120</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078457</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>QUINAPRIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Hypertension. Quinapril is indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with quinapril. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Quinapril may be used alone or in combination with thiazide diuretics. Heart FailureQuinapril is indicated in the management of heart failure as adjunctive therapy when added to conventional therapy including diuretics and/or digitalis.In using quinapril, consideration should be given to the fact that another angiotensin-converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease.Available data are insufficient to show that quinapril does not have a similar risk (see WARNINGS). Angioedema in black patients: Black patients receiving ACE inhibitor monotherapy have been reported to have a higher incidence of angioedema compared to non-blacks. It should also be noted that in controlled clinical trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks.</IndicationAndUsage>
<Description>Quinapril hydrochloride USP is the hydrochloride salt of quinapril, the ethyl ester of a non-sulfhydryl, angiotensin-converting enzyme (ACE) inhibitor, quinaprilat. Quinapril hydrochloride USP is chemically described as [3S-[2[R*(R*)], 3R*]]-2-[2-[[1(ethoxycarbonyl)-3-phenylpropyl]amino]-1-oxopropyl]-1 ,2,3,4-tetrahydro-3-isoquinolinecarboxylic acid, monohydrochloride. Its empirical formula is C2SH30N20S -HCl and its structural formula is. Quinapril hydrochloride USP is a white to off-white amorphous powder that is freely soluble in aqueous solvents. Quinapril Tablets USP contain quinapril hydrochloride equivalent to 5 mg, 10 mg, 20 mg, or 40 mg of quinapril for oral administration. Each tablet also contains lactose monohydrate, magnesium carbonate, magnesium stearate, crospovidone, povidone and opadry brown (hypromellose, titanium dioxide, iron oxide and macrogol).</Description>
</NDC>
<NDC>
<NDCCode>42291-268-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (42291-268-90) </PackageDescription>
<NDC11Code>42291-0268-90</NDC11Code>
<ProductNDC>42291-268</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Entacapone</ProprietaryName>
<NonProprietaryName>Entacapone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140620</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020796</ApplicationNumber>
<LabelerName>AvKARE, Inc.</LabelerName>
<SubstanceName>ENTACAPONE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Catechol O-Methyltransferase Inhibitors [MoA],Catechol-O-Methyltransferase Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-09-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140620</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>51407-268-90</NDCCode>
<PackageDescription>90 TABLET, EXTENDED RELEASE in 1 BOTTLE (51407-268-90) </PackageDescription>
<NDC11Code>51407-0268-90</NDC11Code>
<ProductNDC>51407-268</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Niacin</ProprietaryName>
<NonProprietaryName>Niacin</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170616</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203899</ApplicationNumber>
<LabelerName>Golden State Medical Supply, Inc.</LabelerName>
<SubstanceName>NIACIN</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nicotinic Acid [EPC], Nicotinic Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190705</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hyperlipidemia. Niacin therapy is indicated as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. 1. Niacin extended-release tablets are indicated to reduce elevated TC, LDL-C, Apo B and TG levels, and to increase HDL-C in patients with primary hyperlipidemia and mixed dyslipidemia. 2. In patients with a history of myocardial infarction and hyperlipidemia, niacin is indicated to reduce the risk of recurrent nonfatal myocardial infarction. 3. In patients with a history of coronary artery disease (CAD) and hyperlipidemia, niacin, in combination with a bile acid binding resin, is indicated to slow progression or promote regression of atherosclerotic disease. 4. Niacin extended-release tablets in combination with a bile acid binding resin is indicated to reduce elevated TC and LDL-C levels in adult patients with primary hyperlipidemia. 5. Niacin is also indicated as adjunctive therapy for treatment of adult patients with severe hypertriglyceridemia who present a risk of pancreatitis and who do not respond adequately to a determined dietary effort to control them. Limitations of Use. Addition of niacin extended-release tablets did not reduce cardiovascular morbidity or mortality among patients treated with simvastatin in a large, randomized controlled trial (AIM-HIGH) [see Warnings and Precautions ( 5.1)] .</IndicationAndUsage>
<Description>Niacin Extended-release Tablets, USP (niacin tablet, film-coated extended-release), contain niacin, which at therapeutic doses is an antihyperlipidemic agent. Niacin (nicotinic acid, or 3-pyridinecarboxylic acid) is a white, crystalline powder, very soluble in water, with the following structural formula. Niacin extended-release tablets are unscored, red, film-coated tablets for oral administration and are available in two tablet strengths containing 500 and 1000 mg niacin. Niacin extended-release tablets also contain the inactive ingredients black iron oxide, colloidal silicon dioxide, hydroxypropyl cellulose, lecithin, polyethylene glycol, polyvinyl alcohol, red iron oxide, sodium stearyl fumarate, talc, titanium dioxide, and yellow iron oxide. USP Dissolution Test 5.</Description>
</NDC>
<NDC>
<NDCCode>53217-268-90</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (53217-268-90)</PackageDescription>
<NDC11Code>53217-0268-90</NDC11Code>
<ProductNDC>53217-268</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gabapentin</ProprietaryName>
<NonProprietaryName>Gabapentin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090858</ApplicationNumber>
<LabelerName>Aidarex Pharmaceuticals LLC</LabelerName>
<SubstanceName>GABAPENTIN</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Gabapentin is indicated for: 1 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy.</IndicationAndUsage>
<Description>The active ingredient in gabapentin capsules is gabapentin, which has the chemical name 1-(aminomethyl) cyclohexaneacetic acid. The molecular formula of gabapentin is C9H17NO2 and the molecular weight is 171.24. The structural formula of gabapentin is. Gabapentin is a white to off-white crystalline solid with a pKa1 of 3.7 and a pKa2 of 10.7. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.25. Each gabapentin capsule contains 100 mg, 300 mg, or 400 mg of gabapentin and the following inactive ingredients: anhydrous lactose, cornstarch, and talc. The 100 mg capsule shell contains gelatin, sodium lauryl sulfate, and titanium dioxide. The 300 mg capsule shell contains gelatin, sodium lauryl sulfate, titanium dioxide, and yellow iron oxide. The 400 mg capsule shell contains gelatin, sodium lauryl sulfate, red iron oxide, titanium dioxide, and yellow iron oxide. The imprinting ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propyl glycol, strong ammonia solution, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>55111-268-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (55111-268-90) </PackageDescription>
<NDC11Code>55111-0268-90</NDC11Code>
<ProductNDC>55111-268</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Simvastatin</ProprietaryName>
<NonProprietaryName>Simvastatin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20061220</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077752</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Limited</LabelerName>
<SubstanceName>SIMVASTATIN</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20061220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is indicated as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. In patients with coronary heart disease (CHD) or at high risk of CHD, simvastatin can be started simultaneously with diet.</IndicationAndUsage>
<Description>Simvastatin USP is a lipid-lowering agent that is derived synthetically from a fermentation product of Aspergillus terreus. After oral ingestion, simvastatin USP, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate-limiting step in the biosynthesis of cholesterol. Simvastatin USP is butanoic acid, 2,2-dimethyl-,1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4- hydroxy-6-oxo-2H-pyran-2-yl)-ethyl]-1-naphthalenyl ester, [1S-[1α,3α,7β,8β(2S*,4S*),-8aβ]]. The empirical formula of simvastatin USP is C25H38O5 and its molecular weight is 418.57. Its structural formula is. Simvastatin USP is a white to off-white powder. Practically insoluble in water, freely soluble in chloroform, in alcohol, and in methanol. Sparingly soluble in propylene glycol, very slightly soluble in hexane. Simvastatin tablets USP for oral administration contain either 5 mg, 10 mg, 20 mg, 40 mg or 80 mg of simvastatin and the following inactive ingredients: ascorbic acid, butylated hydroxy anisole, citric acid anhydrous, hydroxypropyl cellulose, hypromellose, iron oxide black, iron oxide red, iron oxide yellow, isopropyl alcohol, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch (corn starch), and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>55289-268-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE, PLASTIC (55289-268-90)</PackageDescription>
<NDC11Code>55289-0268-90</NDC11Code>
<ProductNDC>55289-268</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocodone Bitartrate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Hydrocodone Bitartrate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100218</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040748</ApplicationNumber>
<LabelerName>PD-Rx Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ACETAMINOPHEN; HYDROCODONE BITARTRATE</SubstanceName>
<StrengthNumber>500; 7.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC],Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2014-08-29</LastUpdate>
</NDC>
<NDC>
<NDCCode>67544-268-60</NDCCode>
<PackageDescription>90 CAPSULE, GELATIN COATED in 1 BOTTLE, PLASTIC (67544-268-60) </PackageDescription>
<NDC11Code>67544-0268-60</NDC11Code>
<ProductNDC>67544-268</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxazepam</ProprietaryName>
<NonProprietaryName>Oxazepam</NonProprietaryName>
<DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA072252</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>OXAZEPAM</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070123</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. Anxiety associated with depression is also responsive to Oxazepam therapy. This product has been found particularly useful in the management of anxiety, tension, agitation, and irritability in older patients. Alcoholics with acute tremulousness, inebriation, or with anxiety, associated with alcohol withdrawal are responsive to therapy. The effectiveness of Oxazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Oxazepam is the first of a chemical series of compounds known as the 3-hydroxybenzodiazepinones. A therapeutic agent providing versatility and flexibility in control of common emotional disturbances, this product exerts prompt action in a wide variety of disorders associated with anxiety, tension, agitation, and irritability, and anxiety associated with depression. In tolerance and toxicity studies on several animal species, this product reveals significantly greater safety factors than related compounds (chlordiazepoxide and diazepam) and manifests a wide separation of effective doses and doses inducing side effects. Oxazepam capsules contain 10 mg, 15 mg or 30 mg oxazepam. The following inactive ingredients are contained in these capsules: corn starch, croscarmellose sodium, FD&C Red #40, gelatin, hypromellose, lactose (monohydrate), magnesium stearate, methylparaben, propylparaben, sodium lauryl sulfate, titanium dioxide, and other inert ingredients. The 10 mg capsule also contains D&C Red #28. The 15 mg capsule also contains D&C Yellow #10. The 30 mg capsule also contains D&C Red #28 and FD&C Blue #1. Oxazepam is 7-chloro-1,3-dihydro-3-hydroxy-5-phenyl-2H-1,4-benzodiazepin-2-one. A white crystalline powder with a molecular weight of 286.72, its structural formula is as follows.</Description>
</NDC>
<NDC>
<NDCCode>70934-268-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE, PLASTIC (70934-268-90) </PackageDescription>
<NDC11Code>70934-0268-90</NDC11Code>
<ProductNDC>70934-268</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tizanidine</ProprietaryName>
<NonProprietaryName>Tizanidine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190215</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076416</ApplicationNumber>
<LabelerName>Denton Pharma, Inc. DBA Northwind Pharmaceuticals</LabelerName>
<SubstanceName>TIZANIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71205-268-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (71205-268-90) </PackageDescription>
<NDC11Code>71205-0268-90</NDC11Code>
<ProductNDC>71205-268</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tadalafil</ProprietaryName>
<NonProprietaryName>Tadalafil</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190327</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209167</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>TADALAFIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-04-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tadalafil is a phosphodiesterase 5 (PDE5) inhibitor indicated for the treatment of: : 1 erectile dysfunction (ED) ( 1.1) , 2 the signs and symptoms of benign prostatic hyperplasia (BPH) ( 1.2) , 3 ED and the signs and symptoms of BPH (ED/BPH) ( 1.3) .</IndicationAndUsage>
<Description>Tadalafil is a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type 5 (PDE5). Tadalafil has the empirical formula C 22H 19N 3O 4 representing a molecular weight of 389.41. The structural formula is:. The chemical designation is pyrazino[1´,2´:1,6]pyrido[3,4-b]indole-1,4-dione, 6-(1,3-benzodioxol-5-yl)-2,3,6,7,12,12a-hexahydro-2-methyl-, (6R,12aR)-. It is a crystalline solid that is practically insoluble in water and very slightly soluble in ethanol. Tadalafil tablets, USP are available as almond-shaped, biconvex, film coated tablets in different sizes and different shades of yellow for oral administration. Each tablet contains 2.5 mg, 5 mg, or 20 mg of tadalafil and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, sorbitan monostearate, magnesium stearate, hypromellose, iron oxide red (in 2.5 mg tablets only), iron oxide yellow, talc, titanium dioxide, and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>71610-268-60</NDCCode>
<PackageDescription>90 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (71610-268-60) </PackageDescription>
<NDC11Code>71610-0268-60</NDC11Code>
<ProductNDC>71610-268</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Verapamil Hydrochloride</ProprietaryName>
<NonProprietaryName>Verapamil Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090917</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078906</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>VERAPAMIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>240</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2019-05-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Verapamil hydrochloride extended-release tablets USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including this drug. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy.</IndicationAndUsage>
<Description>Verapamil hydrochloride extended-release tablets USP are calcium ion influx inhibitor (slow channel blocker or calcium ion antagonist). Verapamil hydrochloride extended-release tablets USP are available for oral administration as brown colored, oval, biconvex, film-coated tablets containing 120 mg verapamil hydrochloride USP, as brown colored, oval, biconvex, film-coated tablets containing 180 mg verapamil hydrochloride USP, and as brown colored, oval, biconvex, film-coated tablets containing 240 mg verapamil hydrochloride USP. The tablets are designed for sustained release of the drug in the gastrointestinal tract; sustained-release characteristics are not altered when the tablet is divided in half. The structural formula of verapamil HCl USP is given below. C27H38N2O4·HCl..........M.W. 491.06. Benzeneacetonitrile, α[3-[[2-(3,4-dimethoxyphenyl)ethyl]methylamino]propyl]-3,4- dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil HCl USP is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform and methanol. Verapamil HCl USP is not chemically related to other cardioactive drugs. In addition to verapamil HCl USP, the verapamil hydrochloride extended-release tablets USP contain the following ingredients: colloidal silicon dioxide, sodium alginate, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyethylene glycol and titanium dioxide. The following are the color additives per tablet strength. Verapamil hydrochloride extended-release tablets USP, 120 mg, 180 mg and 240 mg meet USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>72865-268-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (72865-268-90) </PackageDescription>
<NDC11Code>72865-0268-90</NDC11Code>
<ProductNDC>72865-268</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Quetiapine Fumarate</ProprietaryName>
<NonProprietaryName>Quetiapine Fumarate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240202</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204316</ApplicationNumber>
<LabelerName>XLCare Pharmaceuticals Inc.</LabelerName>
<SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240722</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Quetiapine tablets are an atypical antipsychotic indicated for the treatment of: 1 Schizophrenia ( 1.1) , 2 Bipolar I disorder manic episodes ( 1.2) , 3 Bipolar disorder, depressive episodes ( 1.2) .</IndicationAndUsage>
<Description>Quetiapine is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-Dibenzo [ b,f] [1,4]thiazepin-11-yl-1-piperazinyl)-ethoxy] ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is (C 21H 25N 3O 2S) 2. C 4H 4O 4and it has a molecular weight of 883.1 (fumarate salt). The structural formula is:. Quetiapine fumarate USP is a white to off-white crystalline powder which is sparingly soluble in 0.1N hydrochloric acid, slightly soluble in water, in anhydrous ethanol and in methanol. Quetiapine tablets USP are supplied for oral administration as 25 mg (round, peach), 50 mg (round, white), 100 mg (round, yellow), 200 mg (round, white), 300 mg (capsule-shaped, white), and 400 mg (capsule-shaped, yellow) tablets. Inactive ingredients are dibasic calcium phosphate dihydrate, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, sodium starch glycolate and titanium dioxide. The 25 mg tablets contain red iron oxide and yellow iron oxide and the 100 mg and 400 mg tablets contain only yellow iron oxide. Each 25 mg tablet contains 28.78 mg of quetiapine fumarate USP equivalent to 25 mg quetiapine. Each 50 mg tablet contains 57.56 mg of quetiapine fumarate USP equivalent to 50 mg quetiapine. Each 100 mg tablet contains 115.13 mg of quetiapine fumarate USP equivalent to 100 mg quetiapine. Each 200 mg tablet contains 230.24 mg of quetiapine fumarate USP equivalent to 200 mg quetiapine. Each 300 mg tablet contains 345.36 mg of quetiapine fumarate USP equivalent to 300 mg quetiapine. Each 400 mg tablet contains 460.48 mg of quetiapine fumarate USP equivalent to 400 mg quetiapine.</Description>
</NDC>
<NDC>
<NDCCode>76420-009-90</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (76420-009-90) </PackageDescription>
<NDC11Code>76420-0009-90</NDC11Code>
<ProductNDC>76420-009</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Celecoxib</ProprietaryName>
<NonProprietaryName>Celecoxib</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160316</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204590</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>CELECOXIB</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-09-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230902</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Celecoxib capsules are indicated.</IndicationAndUsage>
<Description>Celecoxib is a nonsteroidal anti-inflammatory drug, available as capsules containing 200 mg celecoxib USP for oral administration. The chemical name is 4-[5-(4-methylphenyl)-3-(trifluoromethyl)-1H-pyrazol-1-yl] benzenesulfonamide and is a diaryl-substituted pyrazole. The molecular weight is 381.38. Its molecular formula is C 17H 14F 3N 3O 2S, and it has the following chemical structure:. Celecoxib USP is a white to off-white powder with a pKa of 11.1 (sulfonamide moiety). Celecoxib USP is hydrophobic (log P is 3.5) and is practically insoluble in aqueous media at physiological pH range. The inactive ingredients in celecoxib capsules include: gelatin, lactose monohydrate, magnesium stearate, povidone, sodium lauryl sulfate, hydroxypropyl cellulose, crospovidone and titanium dioxide. The imprinting ink of capsule shell of the 200 mg capsule contains the following inactive ingredients: shellac, propylene glycol, strong ammonia solution and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>76420-010-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (76420-010-90) </PackageDescription>
<NDC11Code>76420-0010-90</NDC11Code>
<ProductNDC>76420-010</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170928</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078722</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221021</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white to off-white crystalline powder with the molecular formula C 20H 21NHCl and a molecular weight of 311.9. It has a melting point of 217° C, and a pK aof 8.47 at 25° C. It is freely soluble in water, in alcohol and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride and insoluble in hydrocarbons. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-(5H-dibenzo[a,d] cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine hydrochloride tablets, USP are supplied as 7.5 mg tablets for oral administration. Cyclobenzaprine hydrochloride 7.5 mg tablets contain the following inactive ingredients: corn starch, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, pregelatinized starch, talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>76420-011-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (76420-011-90) </PackageDescription>
<NDC11Code>76420-0011-90</NDC11Code>
<ProductNDC>76420-011</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170531</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208170</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220810</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets should be used only for short periods (up to 2 or 3 weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a tricyclic amine salt which is white to off white, odourless, crystalline powder with the molecular formula C 20H 21N HCl and a molecular weight of 311.9. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water, in alcohol and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride, insoluble in n-hexane. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-(5H -dibenzo[a,d] cyclohepten-5-ylidene)- N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine hydrochloride tablets, USP are available as 10 mg tablets for oral administration. Each 10 mg tablet contains cyclobenzaprine hydrochloride and the following inactive ingredients: crospovidone, D&C Yellow #10 Aluminum Lake, FD&C Yellow #6 Sunset Yellow FCF Aluminum Lake, hypromellose, lactose anhydrous, macrogol, magnesium stearate, polysorbate 80, pregelatinized starch, silicified microcrystalline cellulose, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>76420-015-90</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (76420-015-90) </PackageDescription>
<NDC11Code>76420-0015-90</NDC11Code>
<ProductNDC>76420-015</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gabapentin</ProprietaryName>
<NonProprietaryName>Gabapentin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140403</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075350</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>GABAPENTIN</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-10-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200123</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gabapentin capsules are indicated for: 1 Management of postherpetic neuralgia in adults, 2 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy.</IndicationAndUsage>
<Description>The active ingredient in gabapentin capsules, USP is gabapentin, USP which has the chemical name 1-(aminomethyl)cyclohexaneacetic acid. The molecular formula of gabapentin, USP is C 9H 17NO 2 and the molecular weight is 171.24. The structural formula of gabapentin, USP is:. Gabapentin, USP is a white to off-white crystalline solid with a pK a1 of 3.7 and a pK a2 of 10.7. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is -1.25. Each gabapentin capsule contains 100 mg, or 300 mg of gabapentin, USP and the following inactive ingredients: black iron oxide, corn starch, D&C Yellow #10 aluminum lake, FD&C blue #1 aluminum lake, FD&C blue #2 aluminum lake, FD&C red #40 aluminum lake, gelatin, mannitol, pharmaceutical glaze, propylene glycol, red iron oxide T3469, silicon dioxide, sodium lauryl sulfate, synthetic black iron oxide, talc, titanium dioxide, and yellow iron oxide T3506.</Description>
</NDC>
<NDC>
<NDCCode>76420-019-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (76420-019-90) </PackageDescription>
<NDC11Code>76420-0019-90</NDC11Code>
<ProductNDC>76420-019</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180116</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078722</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200604</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white to off-white crystalline powder with the molecular formula C 20H 21NHCl and a molecular weight of 311.9. It has a melting point of 217° C, and a pK a of 8.47 at 25° C. It is freely soluble in water, in alcohol and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride and insoluble in hydrocarbons. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-( 5H-dibenzo[ a,d] cyclohepten-5-ylidene)- N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine hydrochloride tablets, USP are supplied as a 7.5 mg tablets for oral administration. Cyclobenzaprine hydrochloride 7.5 mg tablets contain the following inactive ingredients: corn starch, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, pregelatinized starch, talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>76420-020-90</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (76420-020-90) </PackageDescription>
<NDC11Code>76420-0020-90</NDC11Code>
<ProductNDC>76420-020</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gabapentin</ProprietaryName>
<NonProprietaryName>Gabapentin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171205</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090705</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>GABAPENTIN</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-06-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200610</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gabapentin capsules are indicated for: 1 Management of postherpetic neuralgia in adults, 2 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy.</IndicationAndUsage>
<Description>The active ingredient in gabapentin capsules is gabapentin, USP which has the chemical name 1-(aminomethyl) cyclohexane acetic acid. The molecular formula of gabapentin is C 9H 17NO 2 and the molecular weight is 171.24. The structural formula of gabapentin is:. Gabapentin, USP is a white to off-white crystalline solid with a pK a1 of 3.7 and a pK a2 of 10.7. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.25. Gabapentin Capsules, USP are supplied as imprinted hard gelatin capsules containing 300 mg of gabapentin, USP. The inactive ingredients are mannitol, pre-gelatinized starch and talc. The 300 mg capsule contains FD&C Red 40, D&C Yellow 10 and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>76420-021-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (76420-021-90) </PackageDescription>
<NDC11Code>76420-0021-90</NDC11Code>
<ProductNDC>76420-021</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170410</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040275</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191216</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol tablets are indicated in the: 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause. , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. , 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. , 4 Treatment of breast cancer (for palliation only) in appropriately selected women and men with metastatic disease. , 5 Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only). , 6 Prevention of osteoporosis. When prescribing solely for the prevention of postmenopausal osteoporosis, therapy should only be considered for women at significant risk of osteoporosis and for whom non-estrogen medications are not considered to be appropriate (See CLINICAL PHARMACOLOGY, Clinical Studies). .</IndicationAndUsage>
<Description>Estradiol tablets, USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white, crystalline solid, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is. In addition, each tablet for oral administration contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>76420-022-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (76420-022-90) </PackageDescription>
<NDC11Code>76420-0022-90</NDC11Code>
<ProductNDC>76420-022</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170410</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040275</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191216</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol tablets are indicated in the: 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause. , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. , 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. , 4 Treatment of breast cancer (for palliation only) in appropriately selected women and men with metastatic disease. , 5 Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only). , 6 Prevention of osteoporosis. When prescribing solely for the prevention of postmenopausal osteoporosis, therapy should only be considered for women at significant risk of osteoporosis and for whom non-estrogen medications are not considered to be appropriate (See CLINICAL PHARMACOLOGY, Clinical Studies). .</IndicationAndUsage>
<Description>Estradiol tablets, USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white, crystalline solid, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is. In addition, each tablet for oral administration contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>76420-023-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (76420-023-90) </PackageDescription>
<NDC11Code>76420-0023-90</NDC11Code>
<ProductNDC>76420-023</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170410</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040275</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191216</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol tablets are indicated in the: 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause. , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. , 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. , 4 Treatment of breast cancer (for palliation only) in appropriately selected women and men with metastatic disease. , 5 Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only). , 6 Prevention of osteoporosis. When prescribing solely for the prevention of postmenopausal osteoporosis, therapy should only be considered for women at significant risk of osteoporosis and for whom non-estrogen medications are not considered to be appropriate (See CLINICAL PHARMACOLOGY, Clinical Studies). .</IndicationAndUsage>
<Description>Estradiol tablets, USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white, crystalline solid, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is. In addition, each tablet for oral administration contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>76420-024-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (76420-024-90) </PackageDescription>
<NDC11Code>76420-0024-90</NDC11Code>
<ProductNDC>76420-024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eszopiclone</ProprietaryName>
<NonProprietaryName>Eszopiclone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150131</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202929</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>ESZOPICLONE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200617</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Eszopiclone tablets are indicated for the treatment of insomnia. In controlled outpatient and sleep laboratory studies, eszopiclone tablets administered at bedtime decreased sleep latency and improved sleep maintenance. The clinical trials performed in support of efficacy were up to 6 months in duration. The final formal assessments of sleep latency and maintenance were performed at 4 weeks in the 6-week study (adults only), at the end of both 2-week studies (elderly only) and at the end of the 6-month study (adults only).</IndicationAndUsage>
<Description>Eszopiclone, USP is a nonbenzodiazepine hypnotic agent that is a pyrrolopyrazine derivative of the cyclopyrrolone class. The chemical name of eszopiclone is (+)-(5S)-6-(5chloropyridin-2-yl)-7-oxo-6,7-dihydro-5H-pyrrolo[3,4-b] pyrazin-5-yl 4-methylpiperazine-1carboxylate. Its molecular weight is 388.81, and its empirical formula is C 17H 17C lN 6O 3. Eszopiclone, USP has a single chiral center with an (S)-configuration. It has the following chemical structure:. Eszopiclone, USP is a white to light-yellow crystalline solid. Eszopiclone is very slightly soluble in water, slightly soluble in ethanol, and soluble in phosphate buffer (pH 3.2). Eszopiclone, USP is formulated as film-coated tablets for oral administration. Eszopiclone tablets, USP contain 1 mg, 2 mg, or 3 mg eszopiclone, USP and the following inactive ingredients: dibasic calcium phosphate dihydrate, colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide, and triacetin. In addition, both the 1 mg and 3 mg tablets contain FD&C Blue #2.</Description>
</NDC>
</NDCList>