{
"NDC": [
{
"NDCCode": "76420-315-10",
"PackageDescription": "10 TABLET in 1 BOTTLE (76420-315-10) ",
"NDC11Code": "76420-0315-10",
"ProductNDC": "76420-315",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diazepam",
"NonProprietaryName": "Diazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20231214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217843",
"LabelerName": "ASCLEMED USA INC.",
"SubstanceName": "DIAZEPAM",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-11-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251031",
"SamplePackage": "N",
"IndicationAndUsage": "Diazepam tablets are indicated for the management of anxiety disorders or for the short- term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam tablets may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam tablets are a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma), spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia), athetosis, and stiff-man syndrome. Oral diazepam tablets may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of diazepam tablets in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Diazepam is a benzodiazepine derivative. The chemical name of diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a white or almost white crystalline powder, practically insoluble in water, soluble in ethanol 96%, in chloroform and in alcohol. The molecular formula is C 16H 13ClN 2O, and the molecular weight is 284.75. The structural formula is as follows:. Diazepam is available for oral administration as tablets containing 2 mg, 5 mg or 10 mg diazepam USP. In addition to the active ingredient diazepam USP, each tablet contains the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and pregelatinized starch (maize). In addition 5 mg tablets contain yellow iron oxide and 10 mg tablets contain FD&C Blue No. 1."
},
{
"NDCCode": "76420-315-00",
"PackageDescription": "1000 TABLET in 1 BOTTLE (76420-315-00) ",
"NDC11Code": "76420-0315-00",
"ProductNDC": "76420-315",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diazepam",
"NonProprietaryName": "Diazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20231214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217843",
"LabelerName": "ASCLEMED USA INC.",
"SubstanceName": "DIAZEPAM",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-11-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251031",
"SamplePackage": "N",
"IndicationAndUsage": "Diazepam tablets are indicated for the management of anxiety disorders or for the short- term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam tablets may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam tablets are a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma), spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia), athetosis, and stiff-man syndrome. Oral diazepam tablets may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of diazepam tablets in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Diazepam is a benzodiazepine derivative. The chemical name of diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a white or almost white crystalline powder, practically insoluble in water, soluble in ethanol 96%, in chloroform and in alcohol. The molecular formula is C 16H 13ClN 2O, and the molecular weight is 284.75. The structural formula is as follows:. Diazepam is available for oral administration as tablets containing 2 mg, 5 mg or 10 mg diazepam USP. In addition to the active ingredient diazepam USP, each tablet contains the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and pregelatinized starch (maize). In addition 5 mg tablets contain yellow iron oxide and 10 mg tablets contain FD&C Blue No. 1."
},
{
"NDCCode": "76420-315-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (76420-315-01) ",
"NDC11Code": "76420-0315-01",
"ProductNDC": "76420-315",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diazepam",
"NonProprietaryName": "Diazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20231214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217843",
"LabelerName": "ASCLEMED USA INC.",
"SubstanceName": "DIAZEPAM",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-11-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251031",
"SamplePackage": "N",
"IndicationAndUsage": "Diazepam tablets are indicated for the management of anxiety disorders or for the short- term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam tablets may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam tablets are a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma), spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia), athetosis, and stiff-man syndrome. Oral diazepam tablets may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of diazepam tablets in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Diazepam is a benzodiazepine derivative. The chemical name of diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a white or almost white crystalline powder, practically insoluble in water, soluble in ethanol 96%, in chloroform and in alcohol. The molecular formula is C 16H 13ClN 2O, and the molecular weight is 284.75. The structural formula is as follows:. Diazepam is available for oral administration as tablets containing 2 mg, 5 mg or 10 mg diazepam USP. In addition to the active ingredient diazepam USP, each tablet contains the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and pregelatinized starch (maize). In addition 5 mg tablets contain yellow iron oxide and 10 mg tablets contain FD&C Blue No. 1."
},
{
"NDCCode": "76420-315-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (76420-315-05) ",
"NDC11Code": "76420-0315-05",
"ProductNDC": "76420-315",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diazepam",
"NonProprietaryName": "Diazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20231214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217843",
"LabelerName": "ASCLEMED USA INC.",
"SubstanceName": "DIAZEPAM",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-11-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251031",
"SamplePackage": "N",
"IndicationAndUsage": "Diazepam tablets are indicated for the management of anxiety disorders or for the short- term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam tablets may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam tablets are a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma), spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia), athetosis, and stiff-man syndrome. Oral diazepam tablets may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of diazepam tablets in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Diazepam is a benzodiazepine derivative. The chemical name of diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a white or almost white crystalline powder, practically insoluble in water, soluble in ethanol 96%, in chloroform and in alcohol. The molecular formula is C 16H 13ClN 2O, and the molecular weight is 284.75. The structural formula is as follows:. Diazepam is available for oral administration as tablets containing 2 mg, 5 mg or 10 mg diazepam USP. In addition to the active ingredient diazepam USP, each tablet contains the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and pregelatinized starch (maize). In addition 5 mg tablets contain yellow iron oxide and 10 mg tablets contain FD&C Blue No. 1."
},
{
"NDCCode": "76420-315-20",
"PackageDescription": "20 TABLET in 1 BOTTLE (76420-315-20) ",
"NDC11Code": "76420-0315-20",
"ProductNDC": "76420-315",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diazepam",
"NonProprietaryName": "Diazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20231214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217843",
"LabelerName": "ASCLEMED USA INC.",
"SubstanceName": "DIAZEPAM",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-11-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251031",
"SamplePackage": "N",
"IndicationAndUsage": "Diazepam tablets are indicated for the management of anxiety disorders or for the short- term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam tablets may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam tablets are a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma), spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia), athetosis, and stiff-man syndrome. Oral diazepam tablets may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of diazepam tablets in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Diazepam is a benzodiazepine derivative. The chemical name of diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a white or almost white crystalline powder, practically insoluble in water, soluble in ethanol 96%, in chloroform and in alcohol. The molecular formula is C 16H 13ClN 2O, and the molecular weight is 284.75. The structural formula is as follows:. Diazepam is available for oral administration as tablets containing 2 mg, 5 mg or 10 mg diazepam USP. In addition to the active ingredient diazepam USP, each tablet contains the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and pregelatinized starch (maize). In addition 5 mg tablets contain yellow iron oxide and 10 mg tablets contain FD&C Blue No. 1."
},
{
"NDCCode": "76420-315-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (76420-315-30) ",
"NDC11Code": "76420-0315-30",
"ProductNDC": "76420-315",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diazepam",
"NonProprietaryName": "Diazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20231214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217843",
"LabelerName": "ASCLEMED USA INC.",
"SubstanceName": "DIAZEPAM",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-11-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251031",
"SamplePackage": "N",
"IndicationAndUsage": "Diazepam tablets are indicated for the management of anxiety disorders or for the short- term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam tablets may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam tablets are a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma), spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia), athetosis, and stiff-man syndrome. Oral diazepam tablets may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of diazepam tablets in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Diazepam is a benzodiazepine derivative. The chemical name of diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a white or almost white crystalline powder, practically insoluble in water, soluble in ethanol 96%, in chloroform and in alcohol. The molecular formula is C 16H 13ClN 2O, and the molecular weight is 284.75. The structural formula is as follows:. Diazepam is available for oral administration as tablets containing 2 mg, 5 mg or 10 mg diazepam USP. In addition to the active ingredient diazepam USP, each tablet contains the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and pregelatinized starch (maize). In addition 5 mg tablets contain yellow iron oxide and 10 mg tablets contain FD&C Blue No. 1."
},
{
"NDCCode": "76420-315-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (76420-315-60) ",
"NDC11Code": "76420-0315-60",
"ProductNDC": "76420-315",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diazepam",
"NonProprietaryName": "Diazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20231214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217843",
"LabelerName": "ASCLEMED USA INC.",
"SubstanceName": "DIAZEPAM",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-11-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251031",
"SamplePackage": "N",
"IndicationAndUsage": "Diazepam tablets are indicated for the management of anxiety disorders or for the short- term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam tablets may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam tablets are a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma), spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia), athetosis, and stiff-man syndrome. Oral diazepam tablets may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of diazepam tablets in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Diazepam is a benzodiazepine derivative. The chemical name of diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a white or almost white crystalline powder, practically insoluble in water, soluble in ethanol 96%, in chloroform and in alcohol. The molecular formula is C 16H 13ClN 2O, and the molecular weight is 284.75. The structural formula is as follows:. Diazepam is available for oral administration as tablets containing 2 mg, 5 mg or 10 mg diazepam USP. In addition to the active ingredient diazepam USP, each tablet contains the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and pregelatinized starch (maize). In addition 5 mg tablets contain yellow iron oxide and 10 mg tablets contain FD&C Blue No. 1."
},
{
"NDCCode": "76420-315-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (76420-315-90) ",
"NDC11Code": "76420-0315-90",
"ProductNDC": "76420-315",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diazepam",
"NonProprietaryName": "Diazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20231214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217843",
"LabelerName": "ASCLEMED USA INC.",
"SubstanceName": "DIAZEPAM",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-11-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251031",
"SamplePackage": "N",
"IndicationAndUsage": "Diazepam tablets are indicated for the management of anxiety disorders or for the short- term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam tablets may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam tablets are a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma), spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia), athetosis, and stiff-man syndrome. Oral diazepam tablets may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of diazepam tablets in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Diazepam is a benzodiazepine derivative. The chemical name of diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a white or almost white crystalline powder, practically insoluble in water, soluble in ethanol 96%, in chloroform and in alcohol. The molecular formula is C 16H 13ClN 2O, and the molecular weight is 284.75. The structural formula is as follows:. Diazepam is available for oral administration as tablets containing 2 mg, 5 mg or 10 mg diazepam USP. In addition to the active ingredient diazepam USP, each tablet contains the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and pregelatinized starch (maize). In addition 5 mg tablets contain yellow iron oxide and 10 mg tablets contain FD&C Blue No. 1."
},
{
"NDCCode": "10695-315-10",
"PackageDescription": "1 kg in 1 CONTAINER (10695-315-10) ",
"NDC11Code": "10695-0315-10",
"ProductNDC": "10695-315",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Melatonin",
"DosageFormName": "POWDER",
"StartMarketingDate": "20250709",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Willow Birch Pharma, LLC",
"SubstanceName": "MELATONIN",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2025-12-17",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "09-JUL-25"
},
{
"NDCCode": "11673-315-10",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (11673-315-10) > 5 TABLET in 1 BLISTER PACK",
"NDC11Code": "11673-0315-10",
"ProductNDC": "11673-315",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Allergy Relief Medication",
"NonProprietaryName": "Loratadine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100131",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075209",
"LabelerName": "Target Brands, Inc.",
"SubstanceName": "LORATADINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2018-01-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "11673-315-30",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (11673-315-30) > 10 TABLET in 1 BLISTER PACK",
"NDC11Code": "11673-0315-30",
"ProductNDC": "11673-315",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Allergy Relief Medication",
"NonProprietaryName": "Loratadine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100131",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075209",
"LabelerName": "Target Brands, Inc.",
"SubstanceName": "LORATADINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2018-01-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "11673-315-40",
"PackageDescription": "4 BLISTER PACK in 1 CARTON (11673-315-40) > 10 TABLET in 1 BLISTER PACK",
"NDC11Code": "11673-0315-40",
"ProductNDC": "11673-315",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Allergy Relief Medication",
"NonProprietaryName": "Loratadine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100131",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075209",
"LabelerName": "Target Brands, Inc.",
"SubstanceName": "LORATADINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2018-01-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "11673-315-60",
"PackageDescription": "6 BLISTER PACK in 1 CARTON (11673-315-60) > 10 TABLET in 1 BLISTER PACK",
"NDC11Code": "11673-0315-60",
"ProductNDC": "11673-315",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Allergy Relief Medication",
"NonProprietaryName": "Loratadine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100131",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075209",
"LabelerName": "Target Brands, Inc.",
"SubstanceName": "LORATADINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2018-01-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "24208-315-10",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (24208-315-10) / 10 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "24208-0315-10",
"ProductNDC": "24208-315",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Polymyxin B Sulfate And Trimethoprim",
"NonProprietaryName": "Polymyxin B Sulfate And Trimethoprim Sulfate",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "19970214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA064120",
"LabelerName": "Bausch & Lomb Incorporated",
"SubstanceName": "POLYMYXIN B SULFATE; TRIMETHOPRIM SULFATE",
"StrengthNumber": "10000; 1",
"StrengthUnit": "[USP'U]/mL; mg/mL",
"Pharm_Classes": "Cytochrome P450 2C8 Inhibitors [MoA], Dihydrofolate Reductase Inhibitor Antibacterial [EPC], Dihydrofolate Reductase Inhibitors [MoA], Organic Cation Transporter 2 Inhibitors [MoA], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]",
"Status": "Active",
"LastUpdate": "2026-01-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19970214",
"SamplePackage": "N",
"IndicationAndUsage": "Polymyxin B sulfate and trimethoprim ophthalmic solution is indicated in the treatment of surface ocular bacterial infections, including acute bacterial conjunctivitis, and blepharoconjunctivitis, caused by susceptible strains of the following microorganisms: Staphylococcus aureus, Staphylococcus epidermidis, Streptococcus pneumoniae, Streptococcus viridans, Haemophilus influenzaeand Pseudomonas aeruginosa.1. 1Efficacy for this organism in this organ system was studied in fewer than 10 infections.",
"Description": "Polymyxin B sulfate and trimethoprim ophthalmic solution, USP is a sterile antimicrobial solution for topical ophthalmic use. It has pH of 4.0 to 5.5 and osmolality of 270 to 310 mOsm/kg. Chemical Names: Trimethoprim sulfate, 2,4-diamino-5-(3,4,5-trimethoxybenzyl)pyrimidine sulfate, is a white, odorless, crystalline powder with a molecular weight of 678.72 and the following structural formula:. Polymyxin B sulfate is the sulfate salt of polymyxin B 1and B 2which are produced by the growth of Bacillus polymyxa (Prazmowski) Migula (Fam. Bacillaceae). It has a potency of not less than 6,000 polymyxin B units per mg, calculated on an anhydrous basis. The structural formulae are:. Each mL contains:Actives: polymyxin B sulfate equal to 10,000 polymyxin B units, trimethoprim sulfate (equivalent to trimethoprim 1 mg); Inactives: purified water, sodium chloride. Sulfuric acid and, if necessary, sodium hydroxide may be added to adjust pH (4.0 – 5.5). Preservative: benzalkonium chloride 0.004%."
},
{
"NDCCode": "25021-315-98",
"PackageDescription": "1 VIAL in 1 CARTON (25021-315-98) > 10 mL in 1 VIAL",
"NDC11Code": "25021-0315-98",
"ProductNDC": "25021-315",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenylephrine Hydrochloride",
"NonProprietaryName": "Phenylephrine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20201015",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209967",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2020-10-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201015",
"SamplePackage": "N",
"IndicationAndUsage": "Phenylephrine Hydrochloride Injection is indicated for the treatment of clinically important hypotension resulting primarily from vasodilation in the setting of anesthesia.",
"Description": "Phenylephrine is an alpha-1 adrenergic receptor agonist. Phenylephrine Hydrochloride Injection, USP 10 mg per mL, is a clear, colorless, sterile, nonpyrogenic solution for intravenous use. It must be diluted before administration as an intravenous bolus or continuous intravenous infusion. The chemical name of phenylephrine hydrochloride is (-)-m-hydroxy-α[(methylamino)methyl]benzyl alcohol hydrochloride and is chemically designated as C9H14ClNO2 with a molecular weight of 203.66 g/mol. Its structural formula is depicted below:. Phenylephrine hydrochloride is soluble in water and ethanol, and insoluble in chloroform and ethyl ether. Phenylephrine Hydrochloride Injection, USP 10 mg per mL, is sensitive to light. Each mL contains: phenylephrine hydrochloride 10 mg, sodium chloride 3.5 mg, sodium citrate dihydrate 4 mg, citric acid monohydrate 1 mg, and sodium metabisulfite 2 mg in water for injection. The pH is adjusted with sodium hydroxide and/or hydrochloric acid if necessary. The pH range is 3.5 to 5.5."
},
{
"NDCCode": "25021-315-99",
"PackageDescription": "10 VIAL in 1 CARTON (25021-315-99) > 5 mL in 1 VIAL",
"NDC11Code": "25021-0315-99",
"ProductNDC": "25021-315",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenylephrine Hydrochloride",
"NonProprietaryName": "Phenylephrine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20201015",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209967",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2020-10-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201015",
"SamplePackage": "N",
"IndicationAndUsage": "Phenylephrine Hydrochloride Injection is indicated for the treatment of clinically important hypotension resulting primarily from vasodilation in the setting of anesthesia.",
"Description": "Phenylephrine is an alpha-1 adrenergic receptor agonist. Phenylephrine Hydrochloride Injection, USP 10 mg per mL, is a clear, colorless, sterile, nonpyrogenic solution for intravenous use. It must be diluted before administration as an intravenous bolus or continuous intravenous infusion. The chemical name of phenylephrine hydrochloride is (-)-m-hydroxy-α[(methylamino)methyl]benzyl alcohol hydrochloride and is chemically designated as C9H14ClNO2 with a molecular weight of 203.66 g/mol. Its structural formula is depicted below:. Phenylephrine hydrochloride is soluble in water and ethanol, and insoluble in chloroform and ethyl ether. Phenylephrine Hydrochloride Injection, USP 10 mg per mL, is sensitive to light. Each mL contains: phenylephrine hydrochloride 10 mg, sodium chloride 3.5 mg, sodium citrate dihydrate 4 mg, citric acid monohydrate 1 mg, and sodium metabisulfite 2 mg in water for injection. The pH is adjusted with sodium hydroxide and/or hydrochloric acid if necessary. The pH range is 3.5 to 5.5."
},
{
"NDCCode": "33342-315-10",
"PackageDescription": "90 TABLET in 1 BOTTLE (33342-315-10) ",
"NDC11Code": "33342-0315-10",
"ProductNDC": "33342-315",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240603",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208480",
"LabelerName": "Macleods Pharmaceuticals Limited",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240603",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets is indicated: To reduce the risk of: o Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHD o MI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHD o Non-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: o Adults with primary hyperlipidemia. o Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH). As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH). As an adjunct to diet for the treatment of adults with: o Primary dysbetalipoproteinemia o Hypertriglyceridemia.",
"Description": "Atorvastatin, USP is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is [R-R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The empirical formula of atorvastatin calcium, USP is (C33H34FN2O5)2Ca3H2O and its molecular weight is 1209.42. Its structural formula is:. Atorvastatin calcium, USP is a white to off-white crystalline powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium, USP is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in ethanol; and freely soluble in methanol. Atorvastatin calcium tablets, USPfor oral administration contain 10, 20, 40, or 80 mg (equivalent to 10.34 mg, 20.68 mg, 41.36 mg, or 82.72 mg atorvastatin calcium anhydrous) atorvastatin and the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, polysorbate 80, magnesium stearate, hypromellose, talc, titanium dioxide, polyethylene glycol."
},
{
"NDCCode": "33342-315-12",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (33342-315-12) / 10 TABLET in 1 BLISTER PACK",
"NDC11Code": "33342-0315-12",
"ProductNDC": "33342-315",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240603",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208480",
"LabelerName": "Macleods Pharmaceuticals Limited",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240603",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets is indicated: To reduce the risk of: o Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHD o MI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHD o Non-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: o Adults with primary hyperlipidemia. o Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH). As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH). As an adjunct to diet for the treatment of adults with: o Primary dysbetalipoproteinemia o Hypertriglyceridemia.",
"Description": "Atorvastatin, USP is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is [R-R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The empirical formula of atorvastatin calcium, USP is (C33H34FN2O5)2Ca3H2O and its molecular weight is 1209.42. Its structural formula is:. Atorvastatin calcium, USP is a white to off-white crystalline powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium, USP is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in ethanol; and freely soluble in methanol. Atorvastatin calcium tablets, USPfor oral administration contain 10, 20, 40, or 80 mg (equivalent to 10.34 mg, 20.68 mg, 41.36 mg, or 82.72 mg atorvastatin calcium anhydrous) atorvastatin and the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, polysorbate 80, magnesium stearate, hypromellose, talc, titanium dioxide, polyethylene glycol."
},
{
"NDCCode": "35573-315-10",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (35573-315-10)",
"NDC11Code": "35573-0315-10",
"ProductNDC": "35573-315",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Indiomin Mb",
"NonProprietaryName": "Hyoscyamine Sulfate, Methenamine, Methylene Blue, And Sodium Phosphate, Monobasic, Monohydrate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20150928",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Burel Pharmaceuticals, Inc",
"SubstanceName": "HYOSCYAMINE SULFATE; METHENAMINE; METHYLENE BLUE; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE",
"StrengthNumber": ".12; 120; 10; 40.8",
"StrengthUnit": "mg/1; mg/1; mg/1; mg/1",
"Pharm_Classes": "Oxidation-Reduction Agent [EPC],Oxidation-Reduction Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-03-14",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "42023-315-10",
"PackageDescription": "10 BAG in 1 CARTON (42023-315-10) / 250 mL in 1 BAG (42023-315-01) ",
"NDC11Code": "42023-0315-10",
"ProductNDC": "42023-315",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Adrenalin (epinephrine In Sodium Chloride)",
"NonProprietaryName": "Epinephrine In Sodium Chloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20241004",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA215875",
"LabelerName": "Par Health USA, LLC",
"SubstanceName": "EPINEPHRINE",
"StrengthNumber": "16",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241004",
"SamplePackage": "N",
"IndicationAndUsage": "Adrenalin® is a non-selective alpha and beta adrenergic agonist indicated to: 1 Increase mean arterial blood pressure in adult patients with hypotension associated with septic shock (1.1).",
"Description": "Adrenalin (epinephrine in sodium chloride injection) is a sympathomimetic catecholamine. The chemical name of epinephrine is: 1,2- Benzenediol, 4-[(1R)-1-hydroxy-2-(methylamino)ethyl]-, or (-)-3,4-Dihydroxy-α-[2- (methylamino)ethyl]benzyl alcohol. The chemical structure of epinephrine is. The molecular weight of epinephrine is 183.2. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Adrenalin (epinephrine in sodium chloride injection) is a clear, colorless, sterile solution administered by intravenous infusion, supplied in a 250 mL infusion bag. It is provided in five (5) ready-to-use concentrations containing. It may contain hydrochloric acid and/or sodium hydroxide for pH adjustment. It has a pH range of 3.7 - 4.3. The headspace in the containers has been displaced with nitrogen gas."
},
{
"NDCCode": "42291-315-10",
"PackageDescription": "1000 CAPSULE, GELATIN COATED in 1 BOTTLE (42291-315-10) ",
"NDC11Code": "42291-0315-10",
"ProductNDC": "42291-315",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrochlorothiazide",
"NonProprietaryName": "Hydrochlorothiazide",
"DosageFormName": "CAPSULE, GELATIN COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160912",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078391",
"LabelerName": "AvKARE",
"SubstanceName": "HYDROCHLOROTHIAZIDE",
"StrengthNumber": "12.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-09-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20160912",
"SamplePackage": "N"
},
{
"NDCCode": "42571-315-11",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (42571-315-11) / 10 TABLET in 1 BLISTER PACK (42571-315-32) ",
"NDC11Code": "42571-0315-11",
"ProductNDC": "42571-315",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clobazam",
"NonProprietaryName": "Clobazam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190402",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211711",
"LabelerName": "Micro Labs Limited",
"SubstanceName": "CLOBAZAM",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-05-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190402",
"SamplePackage": "N",
"IndicationAndUsage": "Clobazam tablet is indicated for the adjunctive treatment of seizures associated with Lennox-Gastaut syndrome (LGS) in patients 2 years of age or older.",
"Description": "Clobazam tablet is a benzodiazepine derivative. The chemical name of clobazam is 7-Chloro-1-methyl-5-phenyl-1H-1,5 benzodiazepine-2,4(3H,5H)-dione with the following structure. Clobazam is a white or almost white, crystalline powder with a slightly bitter taste; is slightly soluble in water, sparingly soluble in ethanol, and freely soluble in methylenechloride. The melting range of clobazam is from 182ºC to 185ºC. The molecular formula is C 16H 13O 2N 2Cl and the molecular weight is 300.7. Each clobazam tablet contains 10 mg or 20 mg of clobazam. Tablets also contain as inactive ingredients: colloidal silicon dioxide, lactose monohydrate, lactose anhydrous, magnesium stearate, maize starch 5%, pregelatinized starch, and talc."
},
{
"NDCCode": "42571-315-91",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (42571-315-91) / 10 TABLET in 1 BLISTER PACK (42571-315-20) ",
"NDC11Code": "42571-0315-91",
"ProductNDC": "42571-315",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clobazam",
"NonProprietaryName": "Clobazam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190402",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211711",
"LabelerName": "Micro Labs Limited",
"SubstanceName": "CLOBAZAM",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-05-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190402",
"SamplePackage": "N",
"IndicationAndUsage": "Clobazam tablet is indicated for the adjunctive treatment of seizures associated with Lennox-Gastaut syndrome (LGS) in patients 2 years of age or older.",
"Description": "Clobazam tablet is a benzodiazepine derivative. The chemical name of clobazam is 7-Chloro-1-methyl-5-phenyl-1H-1,5 benzodiazepine-2,4(3H,5H)-dione with the following structure. Clobazam is a white or almost white, crystalline powder with a slightly bitter taste; is slightly soluble in water, sparingly soluble in ethanol, and freely soluble in methylenechloride. The melting range of clobazam is from 182ºC to 185ºC. The molecular formula is C 16H 13O 2N 2Cl and the molecular weight is 300.7. Each clobazam tablet contains 10 mg or 20 mg of clobazam. Tablets also contain as inactive ingredients: colloidal silicon dioxide, lactose monohydrate, lactose anhydrous, magnesium stearate, maize starch 5%, pregelatinized starch, and talc."
},
{
"NDCCode": "42806-315-10",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (42806-315-10) ",
"NDC11Code": "42806-0315-10",
"ProductNDC": "42806-315",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170313",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090564",
"LabelerName": "Epic Pharma, LLC",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "1000",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2019-11-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170313",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin hydrochloride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus.",
"Description": "Metformin hydrochloride tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N, N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below. Metformin hydrochloride, USP is a white to off-white crystalline compound with a molecular formula of C4H11N5HCl and a molecular weight of 165.63. Metformin hydrochloride is freely soluble in water, slightly soluble in alcohol, practically insoluble in acetone and in methylene chloride. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Each metformin hydrochloride tablet, USP, contain 500 mg, 850 mg, or 1000 mg of metformin hydrochloride. Each tablet contains the inactive ingredients: povidone (K-30), povidone (K-90), pregelatinized starch, and magnesiium stearate. In addition, the coating for the tablet contains artificial blackberry flavor, hypromellose, macrogol and titanium dioxide."
},
{
"NDCCode": "43975-315-10",
"PackageDescription": "100 CAPSULE, LIQUID FILLED in 1 BOTTLE (43975-315-10) ",
"NDC11Code": "43975-0315-10",
"ProductNDC": "43975-315",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bexarotene",
"NonProprietaryName": "Bexarotene",
"DosageFormName": "CAPSULE, LIQUID FILLED",
"RouteName": "ORAL",
"StartMarketingDate": "20180510",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209861",
"LabelerName": "ANI Pharmaceuticals, Inc.",
"SubstanceName": "BEXAROTENE",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Active",
"LastUpdate": "2025-09-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180510",
"SamplePackage": "N",
"IndicationAndUsage": "Bexarotene capsules are indicated for the treatment of cutaneous manifestations of cutaneous T-cell lymphoma in patients who are refractory to at least one prior systemic therapy.",
"Description": "Bexarotene capsules contain bexarotene, a member of a subclass of retinoids that selectively activate retinoid X receptors (RXRs). These retinoid receptors have biologic activity distinct from that of retinoic acid receptors (RARs). The chemical name of bexarotene is 4-[1-(5,6,7,8-tetrahydro-3,5,5,8,8-pentamethyl-2-naphthalenyl) ethenyl] benzoic acid, and the structural formula is as follows. Bexarotene is an off-white to white powder with a molecular weight of 348.48 and a molecular formula of C24H28O2. It is insoluble in water and slightly soluble in vegetable oils and ethanol, USP. Each bexarotene capsule contains 75 mg of bexarotene for oral administration. It also contains the following inactive ingredients: gelatin, nitrogen, butylated hydroxyanisole, glycerin, hydrolyzed gelatin, medium chain triglyceride, Shellac glaze, FD&C red #40, FD&C blue #1, FD&C yellow #6, propylene glycol, simethicone, polyethylene glycol 400, polysorbate 20, povidone, sorbitol, 1,4-sorbitan, mannitol, soy lecithin and titanium dioxide."
},
{
"NDCCode": "48433-315-10",
"PackageDescription": "100 POUCH in 1 BOX, UNIT-DOSE (48433-315-10) > 1 TABLET in 1 POUCH (48433-315-01)",
"NDC11Code": "48433-0315-10",
"ProductNDC": "48433-315",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisinopril",
"NonProprietaryName": "Lisinopril",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075743",
"LabelerName": "Safecor Health, LLC",
"SubstanceName": "LISINOPRIL",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-11-26",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "49643-315-10",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (49643-315-10) ",
"NDC11Code": "49643-0315-10",
"ProductNDC": "49643-315",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Short Ragweed",
"NonProprietaryName": "Ambrosia Artemisiifolia",
"DosageFormName": "INJECTION",
"RouteName": "CUTANEOUS; INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19820322",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103113",
"LabelerName": "Allermed Laboratories, Inc.",
"SubstanceName": "AMBROSIA ARTEMISIIFOLIA POLLEN",
"StrengthNumber": "1",
"StrengthUnit": "g/10mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19820322",
"SamplePackage": "N",
"IndicationAndUsage": "Studies have shown that properly performed an interpreted skin tests with ragweed pollen extract are useful in the diagnosis of allergy to ragweed pollen 7, 8, 20, 21. Immunotherapy with the appropriate dosage of short ragweed pollen extract is effective in reducing symptoms of hay fever and asthma resulting from exposure to short ragweed pollen (9, 10, 11), and it is believed to be effective with extract of giant ragweed, although carefully controlled studies are unavailable. However, clinical observations and known cross reactivity between short and giant ragweed pollens have led to the practice of using a mixture of the two species for skin testing and treatment 22, 23, 24, 25, 26, 27. This form of treatment is recommended for patients who cannot avoid exposure to pollen and who do not obtain satisfactory relief of symptoms from other medications, such as antihistamines. Immunologic changes resulting from treatment with short ragweed pollen extract are believed to include: : 1 The induction of specific anti-ragweed IgG antibodies commonly referred to as \"blocking antibodies\" 12, 13. , 2 A decrease in the elevation of ragweed specific IgE during and immediately following the ragweed pollen season 14. , 3 A reduction of circulating anti-ragweed IgE after long-term immunotherapy 15. , 4 A decrease in skin reactivity to the extract 16 and a decrease in leukocyte sensitivity to histamine release 17 after long-term immunotherapy. .",
"Description": "INGREDIENTS - Allergenic extract of short ragweed pollen is a clear, amber-colored solution prepared from the dry, defatted pollen of Ambrosia elatior. The extract contains the water extractables of the pollen, 0.25% sodium chloride, 0.125% sodium bicarbonate, 0.5% phenol and 50% glycerol by volume. Extract of mixed short-giant ragweed has the same appearance as short ragweed pollen extract and contains the same chemical ingredients. It is prepared from equal gram weights of the pollens of Ambrosia elatior and Ambrosia trifida. STANDARDIZATION - The potency of ragweed pollen extract is based on antigen E, a protein component which is believed to be the most important allergen of short ragweed pollen. Extracts of short ragweed pollen sold in the U.S. must have a minimum antigen E content of 67.5 units per ml for a 1:20 w/v concentrate. Extracts of mixed short-giant ragweed must have a minimum antigen E content of 33.75 units/ml for a 1:20 w/v concentrate. The importance of antigen E in ragweed allergy is based on the following observations: : 1 In vitro studies with antigen E have shown that it is capable of causing histamine release from peripheral leukocytes of ragweed sensitive persons 1. , 2 The antigen E content of short ragweed pollen extract has been found to correlate with extract potency when measured by skin test response in persons allergic to short ragweed pollen 2. , 3 Immunotherapy with antigen E has been shown to be comparably effective to whole short ragweed pollen extract in reducing symptoms related to ragweed pollen exposure 3. ."
},
{
"NDCCode": "52686-315-10",
"PackageDescription": "1 BOTTLE in 1 CARTON (52686-315-10) > 35.88 g in 1 BOTTLE",
"NDC11Code": "52686-0315-10",
"ProductNDC": "52686-315",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Shiseido Radiant Lifting Foundation",
"ProprietaryNameSuffix": "B40",
"NonProprietaryName": "Octinoxate And Titanium Dioxide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20120801",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "SHISEIDO AMERICA INC.",
"SubstanceName": "OCTINOXATE; TITANIUM DIOXIDE",
"StrengthNumber": "682; 1471",
"StrengthUnit": "mg/35.88g; mg/35.88g",
"Status": "Deprecated",
"LastUpdate": "2023-12-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20120801",
"SamplePackage": "N"
},
{
"NDCCode": "54575-315-10",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (54575-315-10)",
"NDC11Code": "54575-0315-10",
"ProductNDC": "54575-315",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fire Ant",
"NonProprietaryName": "Solenopsis Invicta",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19671207",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101376",
"LabelerName": "Allergy Laboratories, Inc.",
"SubstanceName": "SOLENOPSIS INVICTA",
"StrengthNumber": "1",
"StrengthUnit": "g/20mL",
"Pharm_Classes": "Non-Standardized Insect Venom Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Insect Proteins [CS],Ant Venoms [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens."
},
{
"NDCCode": "55150-315-25",
"PackageDescription": "25 VIAL, MULTI-DOSE in 1 CARTON (55150-315-25) / 10 mL in 1 VIAL, MULTI-DOSE (55150-315-01) ",
"NDC11Code": "55150-0315-25",
"ProductNDC": "55150-315",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Succinylcholine Chloride",
"NonProprietaryName": "Succinylcholine Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20231016",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217808",
"LabelerName": "Eugia US LLC",
"SubstanceName": "SUCCINYLCHOLINE CHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Depolarizing Neuromuscular Blocker [EPC], Neuromuscular Depolarizing Blockade [PE]",
"Status": "Active",
"LastUpdate": "2023-10-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231016",
"SamplePackage": "N",
"IndicationAndUsage": "Succinylcholine chloride injection is indicated in adults and pediatric patients: 1 as an adjunct to general anesthesia, 2 to facilitate tracheal intubation, 3 to provide skeletal muscle relaxation during surgery or mechanical ventilation.",
"Description": "Succinylcholine chloride injection, USP is a sterile, nonpyrogenic solution to be used as a short-acting, depolarizing neuromuscular blocker for intravenous or intramuscular use. Succinylcholine chloride injection, USP contains succinylcholine chloride, USP as the active pharmaceutical ingredient. Succinylcholine chloride, USP is chemically designated C14H30Cl2N2O4.2H2O and its molecular weight is 397.34. The chemical name of succinylcholine chloride, USP is 2,2'-[(1,4-dioxo-1,4 butanediyl)bis(oxy)]bis[N,N,N-trimethyl-ethanaminium]dichloride. Succinylcholine chloride, USP is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white, odorless, slightly bitter powder, very soluble in water. It has the following structural formula:Succinylcholine chloride injection USP, 200 mg/10 mL (20 mg/mL) is intended for multiple-dose administration and contains preservative. Each 1 mL of succinylcholine chloride injection USP, 200 mg/10 mL (20 mg/mL) multiple-dose fliptop vials contains: 20 mg of succinylcholine chloride, USP (equivalent to 22 mg of succinylcholine chloride dihydrate, USP), 1.8 mg of methylparaben and 0.2 mg of propylparaben as preservatives, 4.6 mg of sodium chloride as iso-osmotic agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. The pH of the solution is between 3.0 and 4.5, with an osmolarity of 0.338 mOsm/mL (calc.)."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>76420-315-10</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE (76420-315-10) </PackageDescription>
<NDC11Code>76420-0315-10</NDC11Code>
<ProductNDC>76420-315</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diazepam</ProprietaryName>
<NonProprietaryName>Diazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20231214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217843</ApplicationNumber>
<LabelerName>ASCLEMED USA INC.</LabelerName>
<SubstanceName>DIAZEPAM</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-11-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diazepam tablets are indicated for the management of anxiety disorders or for the short- term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam tablets may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam tablets are a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma), spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia), athetosis, and stiff-man syndrome. Oral diazepam tablets may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of diazepam tablets in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Diazepam is a benzodiazepine derivative. The chemical name of diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a white or almost white crystalline powder, practically insoluble in water, soluble in ethanol 96%, in chloroform and in alcohol. The molecular formula is C 16H 13ClN 2O, and the molecular weight is 284.75. The structural formula is as follows:. Diazepam is available for oral administration as tablets containing 2 mg, 5 mg or 10 mg diazepam USP. In addition to the active ingredient diazepam USP, each tablet contains the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and pregelatinized starch (maize). In addition 5 mg tablets contain yellow iron oxide and 10 mg tablets contain FD&C Blue No. 1.</Description>
</NDC>
<NDC>
<NDCCode>76420-315-00</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (76420-315-00) </PackageDescription>
<NDC11Code>76420-0315-00</NDC11Code>
<ProductNDC>76420-315</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diazepam</ProprietaryName>
<NonProprietaryName>Diazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20231214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217843</ApplicationNumber>
<LabelerName>ASCLEMED USA INC.</LabelerName>
<SubstanceName>DIAZEPAM</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-11-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diazepam tablets are indicated for the management of anxiety disorders or for the short- term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam tablets may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam tablets are a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma), spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia), athetosis, and stiff-man syndrome. Oral diazepam tablets may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of diazepam tablets in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Diazepam is a benzodiazepine derivative. The chemical name of diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a white or almost white crystalline powder, practically insoluble in water, soluble in ethanol 96%, in chloroform and in alcohol. The molecular formula is C 16H 13ClN 2O, and the molecular weight is 284.75. The structural formula is as follows:. Diazepam is available for oral administration as tablets containing 2 mg, 5 mg or 10 mg diazepam USP. In addition to the active ingredient diazepam USP, each tablet contains the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and pregelatinized starch (maize). In addition 5 mg tablets contain yellow iron oxide and 10 mg tablets contain FD&C Blue No. 1.</Description>
</NDC>
<NDC>
<NDCCode>76420-315-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (76420-315-01) </PackageDescription>
<NDC11Code>76420-0315-01</NDC11Code>
<ProductNDC>76420-315</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diazepam</ProprietaryName>
<NonProprietaryName>Diazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20231214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217843</ApplicationNumber>
<LabelerName>ASCLEMED USA INC.</LabelerName>
<SubstanceName>DIAZEPAM</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-11-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diazepam tablets are indicated for the management of anxiety disorders or for the short- term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam tablets may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam tablets are a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma), spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia), athetosis, and stiff-man syndrome. Oral diazepam tablets may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of diazepam tablets in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Diazepam is a benzodiazepine derivative. The chemical name of diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a white or almost white crystalline powder, practically insoluble in water, soluble in ethanol 96%, in chloroform and in alcohol. The molecular formula is C 16H 13ClN 2O, and the molecular weight is 284.75. The structural formula is as follows:. Diazepam is available for oral administration as tablets containing 2 mg, 5 mg or 10 mg diazepam USP. In addition to the active ingredient diazepam USP, each tablet contains the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and pregelatinized starch (maize). In addition 5 mg tablets contain yellow iron oxide and 10 mg tablets contain FD&C Blue No. 1.</Description>
</NDC>
<NDC>
<NDCCode>76420-315-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (76420-315-05) </PackageDescription>
<NDC11Code>76420-0315-05</NDC11Code>
<ProductNDC>76420-315</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diazepam</ProprietaryName>
<NonProprietaryName>Diazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20231214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217843</ApplicationNumber>
<LabelerName>ASCLEMED USA INC.</LabelerName>
<SubstanceName>DIAZEPAM</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-11-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diazepam tablets are indicated for the management of anxiety disorders or for the short- term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam tablets may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam tablets are a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma), spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia), athetosis, and stiff-man syndrome. Oral diazepam tablets may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of diazepam tablets in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Diazepam is a benzodiazepine derivative. The chemical name of diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a white or almost white crystalline powder, practically insoluble in water, soluble in ethanol 96%, in chloroform and in alcohol. The molecular formula is C 16H 13ClN 2O, and the molecular weight is 284.75. The structural formula is as follows:. Diazepam is available for oral administration as tablets containing 2 mg, 5 mg or 10 mg diazepam USP. In addition to the active ingredient diazepam USP, each tablet contains the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and pregelatinized starch (maize). In addition 5 mg tablets contain yellow iron oxide and 10 mg tablets contain FD&C Blue No. 1.</Description>
</NDC>
<NDC>
<NDCCode>76420-315-20</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE (76420-315-20) </PackageDescription>
<NDC11Code>76420-0315-20</NDC11Code>
<ProductNDC>76420-315</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diazepam</ProprietaryName>
<NonProprietaryName>Diazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20231214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217843</ApplicationNumber>
<LabelerName>ASCLEMED USA INC.</LabelerName>
<SubstanceName>DIAZEPAM</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-11-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diazepam tablets are indicated for the management of anxiety disorders or for the short- term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam tablets may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam tablets are a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma), spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia), athetosis, and stiff-man syndrome. Oral diazepam tablets may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of diazepam tablets in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Diazepam is a benzodiazepine derivative. The chemical name of diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a white or almost white crystalline powder, practically insoluble in water, soluble in ethanol 96%, in chloroform and in alcohol. The molecular formula is C 16H 13ClN 2O, and the molecular weight is 284.75. The structural formula is as follows:. Diazepam is available for oral administration as tablets containing 2 mg, 5 mg or 10 mg diazepam USP. In addition to the active ingredient diazepam USP, each tablet contains the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and pregelatinized starch (maize). In addition 5 mg tablets contain yellow iron oxide and 10 mg tablets contain FD&C Blue No. 1.</Description>
</NDC>
<NDC>
<NDCCode>76420-315-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (76420-315-30) </PackageDescription>
<NDC11Code>76420-0315-30</NDC11Code>
<ProductNDC>76420-315</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diazepam</ProprietaryName>
<NonProprietaryName>Diazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20231214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217843</ApplicationNumber>
<LabelerName>ASCLEMED USA INC.</LabelerName>
<SubstanceName>DIAZEPAM</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-11-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diazepam tablets are indicated for the management of anxiety disorders or for the short- term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam tablets may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam tablets are a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma), spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia), athetosis, and stiff-man syndrome. Oral diazepam tablets may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of diazepam tablets in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Diazepam is a benzodiazepine derivative. The chemical name of diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a white or almost white crystalline powder, practically insoluble in water, soluble in ethanol 96%, in chloroform and in alcohol. The molecular formula is C 16H 13ClN 2O, and the molecular weight is 284.75. The structural formula is as follows:. Diazepam is available for oral administration as tablets containing 2 mg, 5 mg or 10 mg diazepam USP. In addition to the active ingredient diazepam USP, each tablet contains the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and pregelatinized starch (maize). In addition 5 mg tablets contain yellow iron oxide and 10 mg tablets contain FD&C Blue No. 1.</Description>
</NDC>
<NDC>
<NDCCode>76420-315-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (76420-315-60) </PackageDescription>
<NDC11Code>76420-0315-60</NDC11Code>
<ProductNDC>76420-315</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diazepam</ProprietaryName>
<NonProprietaryName>Diazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20231214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217843</ApplicationNumber>
<LabelerName>ASCLEMED USA INC.</LabelerName>
<SubstanceName>DIAZEPAM</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-11-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diazepam tablets are indicated for the management of anxiety disorders or for the short- term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam tablets may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam tablets are a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma), spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia), athetosis, and stiff-man syndrome. Oral diazepam tablets may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of diazepam tablets in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Diazepam is a benzodiazepine derivative. The chemical name of diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a white or almost white crystalline powder, practically insoluble in water, soluble in ethanol 96%, in chloroform and in alcohol. The molecular formula is C 16H 13ClN 2O, and the molecular weight is 284.75. The structural formula is as follows:. Diazepam is available for oral administration as tablets containing 2 mg, 5 mg or 10 mg diazepam USP. In addition to the active ingredient diazepam USP, each tablet contains the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and pregelatinized starch (maize). In addition 5 mg tablets contain yellow iron oxide and 10 mg tablets contain FD&C Blue No. 1.</Description>
</NDC>
<NDC>
<NDCCode>76420-315-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (76420-315-90) </PackageDescription>
<NDC11Code>76420-0315-90</NDC11Code>
<ProductNDC>76420-315</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diazepam</ProprietaryName>
<NonProprietaryName>Diazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20231214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217843</ApplicationNumber>
<LabelerName>ASCLEMED USA INC.</LabelerName>
<SubstanceName>DIAZEPAM</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-11-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diazepam tablets are indicated for the management of anxiety disorders or for the short- term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam tablets may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam tablets are a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma), spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia), athetosis, and stiff-man syndrome. Oral diazepam tablets may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of diazepam tablets in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Diazepam is a benzodiazepine derivative. The chemical name of diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a white or almost white crystalline powder, practically insoluble in water, soluble in ethanol 96%, in chloroform and in alcohol. The molecular formula is C 16H 13ClN 2O, and the molecular weight is 284.75. The structural formula is as follows:. Diazepam is available for oral administration as tablets containing 2 mg, 5 mg or 10 mg diazepam USP. In addition to the active ingredient diazepam USP, each tablet contains the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and pregelatinized starch (maize). In addition 5 mg tablets contain yellow iron oxide and 10 mg tablets contain FD&C Blue No. 1.</Description>
</NDC>
<NDC>
<NDCCode>10695-315-10</NDCCode>
<PackageDescription>1 kg in 1 CONTAINER (10695-315-10) </PackageDescription>
<NDC11Code>10695-0315-10</NDC11Code>
<ProductNDC>10695-315</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Melatonin</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20250709</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Willow Birch Pharma, LLC</LabelerName>
<SubstanceName>MELATONIN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-12-17</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>09-JUL-25</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>11673-315-10</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (11673-315-10) > 5 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>11673-0315-10</NDC11Code>
<ProductNDC>11673-315</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Allergy Relief Medication</ProprietaryName>
<NonProprietaryName>Loratadine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100131</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075209</ApplicationNumber>
<LabelerName>Target Brands, Inc.</LabelerName>
<SubstanceName>LORATADINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-01-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>11673-315-30</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (11673-315-30) > 10 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>11673-0315-30</NDC11Code>
<ProductNDC>11673-315</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Allergy Relief Medication</ProprietaryName>
<NonProprietaryName>Loratadine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100131</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075209</ApplicationNumber>
<LabelerName>Target Brands, Inc.</LabelerName>
<SubstanceName>LORATADINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-01-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>11673-315-40</NDCCode>
<PackageDescription>4 BLISTER PACK in 1 CARTON (11673-315-40) > 10 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>11673-0315-40</NDC11Code>
<ProductNDC>11673-315</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Allergy Relief Medication</ProprietaryName>
<NonProprietaryName>Loratadine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100131</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075209</ApplicationNumber>
<LabelerName>Target Brands, Inc.</LabelerName>
<SubstanceName>LORATADINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-01-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>11673-315-60</NDCCode>
<PackageDescription>6 BLISTER PACK in 1 CARTON (11673-315-60) > 10 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>11673-0315-60</NDC11Code>
<ProductNDC>11673-315</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Allergy Relief Medication</ProprietaryName>
<NonProprietaryName>Loratadine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100131</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075209</ApplicationNumber>
<LabelerName>Target Brands, Inc.</LabelerName>
<SubstanceName>LORATADINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-01-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>24208-315-10</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (24208-315-10) / 10 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>24208-0315-10</NDC11Code>
<ProductNDC>24208-315</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Polymyxin B Sulfate And Trimethoprim</ProprietaryName>
<NonProprietaryName>Polymyxin B Sulfate And Trimethoprim Sulfate</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>19970214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA064120</ApplicationNumber>
<LabelerName>Bausch & Lomb Incorporated</LabelerName>
<SubstanceName>POLYMYXIN B SULFATE; TRIMETHOPRIM SULFATE</SubstanceName>
<StrengthNumber>10000; 1</StrengthNumber>
<StrengthUnit>[USP'U]/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C8 Inhibitors [MoA], Dihydrofolate Reductase Inhibitor Antibacterial [EPC], Dihydrofolate Reductase Inhibitors [MoA], Organic Cation Transporter 2 Inhibitors [MoA], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19970214</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Polymyxin B sulfate and trimethoprim ophthalmic solution is indicated in the treatment of surface ocular bacterial infections, including acute bacterial conjunctivitis, and blepharoconjunctivitis, caused by susceptible strains of the following microorganisms: Staphylococcus aureus, Staphylococcus epidermidis, Streptococcus pneumoniae, Streptococcus viridans, Haemophilus influenzaeand Pseudomonas aeruginosa.1. 1Efficacy for this organism in this organ system was studied in fewer than 10 infections.</IndicationAndUsage>
<Description>Polymyxin B sulfate and trimethoprim ophthalmic solution, USP is a sterile antimicrobial solution for topical ophthalmic use. It has pH of 4.0 to 5.5 and osmolality of 270 to 310 mOsm/kg. Chemical Names: Trimethoprim sulfate, 2,4-diamino-5-(3,4,5-trimethoxybenzyl)pyrimidine sulfate, is a white, odorless, crystalline powder with a molecular weight of 678.72 and the following structural formula:. Polymyxin B sulfate is the sulfate salt of polymyxin B 1and B 2which are produced by the growth of Bacillus polymyxa (Prazmowski) Migula (Fam. Bacillaceae). It has a potency of not less than 6,000 polymyxin B units per mg, calculated on an anhydrous basis. The structural formulae are:. Each mL contains:Actives: polymyxin B sulfate equal to 10,000 polymyxin B units, trimethoprim sulfate (equivalent to trimethoprim 1 mg); Inactives: purified water, sodium chloride. Sulfuric acid and, if necessary, sodium hydroxide may be added to adjust pH (4.0 – 5.5). Preservative: benzalkonium chloride 0.004%.</Description>
</NDC>
<NDC>
<NDCCode>25021-315-98</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (25021-315-98) > 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0315-98</NDC11Code>
<ProductNDC>25021-315</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenylephrine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenylephrine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20201015</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209967</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-10-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201015</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phenylephrine Hydrochloride Injection is indicated for the treatment of clinically important hypotension resulting primarily from vasodilation in the setting of anesthesia.</IndicationAndUsage>
<Description>Phenylephrine is an alpha-1 adrenergic receptor agonist. Phenylephrine Hydrochloride Injection, USP 10 mg per mL, is a clear, colorless, sterile, nonpyrogenic solution for intravenous use. It must be diluted before administration as an intravenous bolus or continuous intravenous infusion. The chemical name of phenylephrine hydrochloride is (-)-m-hydroxy-α[(methylamino)methyl]benzyl alcohol hydrochloride and is chemically designated as C9H14ClNO2 with a molecular weight of 203.66 g/mol. Its structural formula is depicted below:. Phenylephrine hydrochloride is soluble in water and ethanol, and insoluble in chloroform and ethyl ether. Phenylephrine Hydrochloride Injection, USP 10 mg per mL, is sensitive to light. Each mL contains: phenylephrine hydrochloride 10 mg, sodium chloride 3.5 mg, sodium citrate dihydrate 4 mg, citric acid monohydrate 1 mg, and sodium metabisulfite 2 mg in water for injection. The pH is adjusted with sodium hydroxide and/or hydrochloric acid if necessary. The pH range is 3.5 to 5.5.</Description>
</NDC>
<NDC>
<NDCCode>25021-315-99</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (25021-315-99) > 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0315-99</NDC11Code>
<ProductNDC>25021-315</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenylephrine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenylephrine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20201015</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209967</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-10-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201015</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phenylephrine Hydrochloride Injection is indicated for the treatment of clinically important hypotension resulting primarily from vasodilation in the setting of anesthesia.</IndicationAndUsage>
<Description>Phenylephrine is an alpha-1 adrenergic receptor agonist. Phenylephrine Hydrochloride Injection, USP 10 mg per mL, is a clear, colorless, sterile, nonpyrogenic solution for intravenous use. It must be diluted before administration as an intravenous bolus or continuous intravenous infusion. The chemical name of phenylephrine hydrochloride is (-)-m-hydroxy-α[(methylamino)methyl]benzyl alcohol hydrochloride and is chemically designated as C9H14ClNO2 with a molecular weight of 203.66 g/mol. Its structural formula is depicted below:. Phenylephrine hydrochloride is soluble in water and ethanol, and insoluble in chloroform and ethyl ether. Phenylephrine Hydrochloride Injection, USP 10 mg per mL, is sensitive to light. Each mL contains: phenylephrine hydrochloride 10 mg, sodium chloride 3.5 mg, sodium citrate dihydrate 4 mg, citric acid monohydrate 1 mg, and sodium metabisulfite 2 mg in water for injection. The pH is adjusted with sodium hydroxide and/or hydrochloric acid if necessary. The pH range is 3.5 to 5.5.</Description>
</NDC>
<NDC>
<NDCCode>33342-315-10</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (33342-315-10) </PackageDescription>
<NDC11Code>33342-0315-10</NDC11Code>
<ProductNDC>33342-315</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240603</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208480</ApplicationNumber>
<LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240603</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets is indicated: To reduce the risk of: o Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHD o MI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHD o Non-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: o Adults with primary hyperlipidemia. o Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH). As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH). As an adjunct to diet for the treatment of adults with: o Primary dysbetalipoproteinemia o Hypertriglyceridemia.</IndicationAndUsage>
<Description>Atorvastatin, USP is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is [R-R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The empirical formula of atorvastatin calcium, USP is (C33H34FN2O5)2Ca3H2O and its molecular weight is 1209.42. Its structural formula is:. Atorvastatin calcium, USP is a white to off-white crystalline powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium, USP is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in ethanol; and freely soluble in methanol. Atorvastatin calcium tablets, USPfor oral administration contain 10, 20, 40, or 80 mg (equivalent to 10.34 mg, 20.68 mg, 41.36 mg, or 82.72 mg atorvastatin calcium anhydrous) atorvastatin and the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, polysorbate 80, magnesium stearate, hypromellose, talc, titanium dioxide, polyethylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>33342-315-12</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (33342-315-12) / 10 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>33342-0315-12</NDC11Code>
<ProductNDC>33342-315</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240603</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208480</ApplicationNumber>
<LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240603</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets is indicated: To reduce the risk of: o Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHD o MI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHD o Non-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: o Adults with primary hyperlipidemia. o Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH). As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH). As an adjunct to diet for the treatment of adults with: o Primary dysbetalipoproteinemia o Hypertriglyceridemia.</IndicationAndUsage>
<Description>Atorvastatin, USP is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is [R-R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The empirical formula of atorvastatin calcium, USP is (C33H34FN2O5)2Ca3H2O and its molecular weight is 1209.42. Its structural formula is:. Atorvastatin calcium, USP is a white to off-white crystalline powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium, USP is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in ethanol; and freely soluble in methanol. Atorvastatin calcium tablets, USPfor oral administration contain 10, 20, 40, or 80 mg (equivalent to 10.34 mg, 20.68 mg, 41.36 mg, or 82.72 mg atorvastatin calcium anhydrous) atorvastatin and the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, polysorbate 80, magnesium stearate, hypromellose, talc, titanium dioxide, polyethylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>35573-315-10</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (35573-315-10)</PackageDescription>
<NDC11Code>35573-0315-10</NDC11Code>
<ProductNDC>35573-315</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Indiomin Mb</ProprietaryName>
<NonProprietaryName>Hyoscyamine Sulfate, Methenamine, Methylene Blue, And Sodium Phosphate, Monobasic, Monohydrate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150928</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Burel Pharmaceuticals, Inc</LabelerName>
<SubstanceName>HYOSCYAMINE SULFATE; METHENAMINE; METHYLENE BLUE; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE</SubstanceName>
<StrengthNumber>.12; 120; 10; 40.8</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Oxidation-Reduction Agent [EPC],Oxidation-Reduction Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-03-14</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>42023-315-10</NDCCode>
<PackageDescription>10 BAG in 1 CARTON (42023-315-10) / 250 mL in 1 BAG (42023-315-01) </PackageDescription>
<NDC11Code>42023-0315-10</NDC11Code>
<ProductNDC>42023-315</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Adrenalin (epinephrine In Sodium Chloride)</ProprietaryName>
<NonProprietaryName>Epinephrine In Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20241004</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA215875</ApplicationNumber>
<LabelerName>Par Health USA, LLC</LabelerName>
<SubstanceName>EPINEPHRINE</SubstanceName>
<StrengthNumber>16</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241004</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Adrenalin® is a non-selective alpha and beta adrenergic agonist indicated to: 1 Increase mean arterial blood pressure in adult patients with hypotension associated with septic shock (1.1).</IndicationAndUsage>
<Description>Adrenalin (epinephrine in sodium chloride injection) is a sympathomimetic catecholamine. The chemical name of epinephrine is: 1,2- Benzenediol, 4-[(1R)-1-hydroxy-2-(methylamino)ethyl]-, or (-)-3,4-Dihydroxy-α-[2- (methylamino)ethyl]benzyl alcohol. The chemical structure of epinephrine is. The molecular weight of epinephrine is 183.2. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Adrenalin (epinephrine in sodium chloride injection) is a clear, colorless, sterile solution administered by intravenous infusion, supplied in a 250 mL infusion bag. It is provided in five (5) ready-to-use concentrations containing. It may contain hydrochloric acid and/or sodium hydroxide for pH adjustment. It has a pH range of 3.7 - 4.3. The headspace in the containers has been displaced with nitrogen gas.</Description>
</NDC>
<NDC>
<NDCCode>42291-315-10</NDCCode>
<PackageDescription>1000 CAPSULE, GELATIN COATED in 1 BOTTLE (42291-315-10) </PackageDescription>
<NDC11Code>42291-0315-10</NDC11Code>
<ProductNDC>42291-315</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160912</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078391</ApplicationNumber>
<LabelerName>AvKARE</LabelerName>
<SubstanceName>HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>12.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-09-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160912</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>42571-315-11</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (42571-315-11) / 10 TABLET in 1 BLISTER PACK (42571-315-32) </PackageDescription>
<NDC11Code>42571-0315-11</NDC11Code>
<ProductNDC>42571-315</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clobazam</ProprietaryName>
<NonProprietaryName>Clobazam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190402</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211711</ApplicationNumber>
<LabelerName>Micro Labs Limited</LabelerName>
<SubstanceName>CLOBAZAM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clobazam tablet is indicated for the adjunctive treatment of seizures associated with Lennox-Gastaut syndrome (LGS) in patients 2 years of age or older.</IndicationAndUsage>
<Description>Clobazam tablet is a benzodiazepine derivative. The chemical name of clobazam is 7-Chloro-1-methyl-5-phenyl-1H-1,5 benzodiazepine-2,4(3H,5H)-dione with the following structure. Clobazam is a white or almost white, crystalline powder with a slightly bitter taste; is slightly soluble in water, sparingly soluble in ethanol, and freely soluble in methylenechloride. The melting range of clobazam is from 182ºC to 185ºC. The molecular formula is C 16H 13O 2N 2Cl and the molecular weight is 300.7. Each clobazam tablet contains 10 mg or 20 mg of clobazam. Tablets also contain as inactive ingredients: colloidal silicon dioxide, lactose monohydrate, lactose anhydrous, magnesium stearate, maize starch 5%, pregelatinized starch, and talc.</Description>
</NDC>
<NDC>
<NDCCode>42571-315-91</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (42571-315-91) / 10 TABLET in 1 BLISTER PACK (42571-315-20) </PackageDescription>
<NDC11Code>42571-0315-91</NDC11Code>
<ProductNDC>42571-315</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clobazam</ProprietaryName>
<NonProprietaryName>Clobazam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190402</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211711</ApplicationNumber>
<LabelerName>Micro Labs Limited</LabelerName>
<SubstanceName>CLOBAZAM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clobazam tablet is indicated for the adjunctive treatment of seizures associated with Lennox-Gastaut syndrome (LGS) in patients 2 years of age or older.</IndicationAndUsage>
<Description>Clobazam tablet is a benzodiazepine derivative. The chemical name of clobazam is 7-Chloro-1-methyl-5-phenyl-1H-1,5 benzodiazepine-2,4(3H,5H)-dione with the following structure. Clobazam is a white or almost white, crystalline powder with a slightly bitter taste; is slightly soluble in water, sparingly soluble in ethanol, and freely soluble in methylenechloride. The melting range of clobazam is from 182ºC to 185ºC. The molecular formula is C 16H 13O 2N 2Cl and the molecular weight is 300.7. Each clobazam tablet contains 10 mg or 20 mg of clobazam. Tablets also contain as inactive ingredients: colloidal silicon dioxide, lactose monohydrate, lactose anhydrous, magnesium stearate, maize starch 5%, pregelatinized starch, and talc.</Description>
</NDC>
<NDC>
<NDCCode>42806-315-10</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (42806-315-10) </PackageDescription>
<NDC11Code>42806-0315-10</NDC11Code>
<ProductNDC>42806-315</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170313</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090564</ApplicationNumber>
<LabelerName>Epic Pharma, LLC</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2019-11-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170313</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin hydrochloride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin hydrochloride tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N, N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below. Metformin hydrochloride, USP is a white to off-white crystalline compound with a molecular formula of C4H11N5HCl and a molecular weight of 165.63. Metformin hydrochloride is freely soluble in water, slightly soluble in alcohol, practically insoluble in acetone and in methylene chloride. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Each metformin hydrochloride tablet, USP, contain 500 mg, 850 mg, or 1000 mg of metformin hydrochloride. Each tablet contains the inactive ingredients: povidone (K-30), povidone (K-90), pregelatinized starch, and magnesiium stearate. In addition, the coating for the tablet contains artificial blackberry flavor, hypromellose, macrogol and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43975-315-10</NDCCode>
<PackageDescription>100 CAPSULE, LIQUID FILLED in 1 BOTTLE (43975-315-10) </PackageDescription>
<NDC11Code>43975-0315-10</NDC11Code>
<ProductNDC>43975-315</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bexarotene</ProprietaryName>
<NonProprietaryName>Bexarotene</NonProprietaryName>
<DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180510</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209861</ApplicationNumber>
<LabelerName>ANI Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>BEXAROTENE</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180510</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bexarotene capsules are indicated for the treatment of cutaneous manifestations of cutaneous T-cell lymphoma in patients who are refractory to at least one prior systemic therapy.</IndicationAndUsage>
<Description>Bexarotene capsules contain bexarotene, a member of a subclass of retinoids that selectively activate retinoid X receptors (RXRs). These retinoid receptors have biologic activity distinct from that of retinoic acid receptors (RARs). The chemical name of bexarotene is 4-[1-(5,6,7,8-tetrahydro-3,5,5,8,8-pentamethyl-2-naphthalenyl) ethenyl] benzoic acid, and the structural formula is as follows. Bexarotene is an off-white to white powder with a molecular weight of 348.48 and a molecular formula of C24H28O2. It is insoluble in water and slightly soluble in vegetable oils and ethanol, USP. Each bexarotene capsule contains 75 mg of bexarotene for oral administration. It also contains the following inactive ingredients: gelatin, nitrogen, butylated hydroxyanisole, glycerin, hydrolyzed gelatin, medium chain triglyceride, Shellac glaze, FD&C red #40, FD&C blue #1, FD&C yellow #6, propylene glycol, simethicone, polyethylene glycol 400, polysorbate 20, povidone, sorbitol, 1,4-sorbitan, mannitol, soy lecithin and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>48433-315-10</NDCCode>
<PackageDescription>100 POUCH in 1 BOX, UNIT-DOSE (48433-315-10) > 1 TABLET in 1 POUCH (48433-315-01)</PackageDescription>
<NDC11Code>48433-0315-10</NDC11Code>
<ProductNDC>48433-315</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisinopril</ProprietaryName>
<NonProprietaryName>Lisinopril</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075743</ApplicationNumber>
<LabelerName>Safecor Health, LLC</LabelerName>
<SubstanceName>LISINOPRIL</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-11-26</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>49643-315-10</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49643-315-10) </PackageDescription>
<NDC11Code>49643-0315-10</NDC11Code>
<ProductNDC>49643-315</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Short Ragweed</ProprietaryName>
<NonProprietaryName>Ambrosia Artemisiifolia</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19820322</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103113</ApplicationNumber>
<LabelerName>Allermed Laboratories, Inc.</LabelerName>
<SubstanceName>AMBROSIA ARTEMISIIFOLIA POLLEN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/10mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19820322</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Studies have shown that properly performed an interpreted skin tests with ragweed pollen extract are useful in the diagnosis of allergy to ragweed pollen 7, 8, 20, 21. Immunotherapy with the appropriate dosage of short ragweed pollen extract is effective in reducing symptoms of hay fever and asthma resulting from exposure to short ragweed pollen (9, 10, 11), and it is believed to be effective with extract of giant ragweed, although carefully controlled studies are unavailable. However, clinical observations and known cross reactivity between short and giant ragweed pollens have led to the practice of using a mixture of the two species for skin testing and treatment 22, 23, 24, 25, 26, 27. This form of treatment is recommended for patients who cannot avoid exposure to pollen and who do not obtain satisfactory relief of symptoms from other medications, such as antihistamines. Immunologic changes resulting from treatment with short ragweed pollen extract are believed to include: : 1 The induction of specific anti-ragweed IgG antibodies commonly referred to as "blocking antibodies" 12, 13. , 2 A decrease in the elevation of ragweed specific IgE during and immediately following the ragweed pollen season 14. , 3 A reduction of circulating anti-ragweed IgE after long-term immunotherapy 15. , 4 A decrease in skin reactivity to the extract 16 and a decrease in leukocyte sensitivity to histamine release 17 after long-term immunotherapy. .</IndicationAndUsage>
<Description>INGREDIENTS - Allergenic extract of short ragweed pollen is a clear, amber-colored solution prepared from the dry, defatted pollen of Ambrosia elatior. The extract contains the water extractables of the pollen, 0.25% sodium chloride, 0.125% sodium bicarbonate, 0.5% phenol and 50% glycerol by volume. Extract of mixed short-giant ragweed has the same appearance as short ragweed pollen extract and contains the same chemical ingredients. It is prepared from equal gram weights of the pollens of Ambrosia elatior and Ambrosia trifida. STANDARDIZATION - The potency of ragweed pollen extract is based on antigen E, a protein component which is believed to be the most important allergen of short ragweed pollen. Extracts of short ragweed pollen sold in the U.S. must have a minimum antigen E content of 67.5 units per ml for a 1:20 w/v concentrate. Extracts of mixed short-giant ragweed must have a minimum antigen E content of 33.75 units/ml for a 1:20 w/v concentrate. The importance of antigen E in ragweed allergy is based on the following observations: : 1 In vitro studies with antigen E have shown that it is capable of causing histamine release from peripheral leukocytes of ragweed sensitive persons 1. , 2 The antigen E content of short ragweed pollen extract has been found to correlate with extract potency when measured by skin test response in persons allergic to short ragweed pollen 2. , 3 Immunotherapy with antigen E has been shown to be comparably effective to whole short ragweed pollen extract in reducing symptoms related to ragweed pollen exposure 3. .</Description>
</NDC>
<NDC>
<NDCCode>52686-315-10</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (52686-315-10) > 35.88 g in 1 BOTTLE</PackageDescription>
<NDC11Code>52686-0315-10</NDC11Code>
<ProductNDC>52686-315</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Shiseido Radiant Lifting Foundation</ProprietaryName>
<ProprietaryNameSuffix>B40</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate And Titanium Dioxide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20120801</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>SHISEIDO AMERICA INC.</LabelerName>
<SubstanceName>OCTINOXATE; TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>682; 1471</StrengthNumber>
<StrengthUnit>mg/35.88g; mg/35.88g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-12-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>54575-315-10</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (54575-315-10)</PackageDescription>
<NDC11Code>54575-0315-10</NDC11Code>
<ProductNDC>54575-315</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fire Ant</ProprietaryName>
<NonProprietaryName>Solenopsis Invicta</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19671207</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101376</ApplicationNumber>
<LabelerName>Allergy Laboratories, Inc.</LabelerName>
<SubstanceName>SOLENOPSIS INVICTA</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/20mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Insect Venom Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Insect Proteins [CS],Ant Venoms [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
</NDC>
<NDC>
<NDCCode>55150-315-25</NDCCode>
<PackageDescription>25 VIAL, MULTI-DOSE in 1 CARTON (55150-315-25) / 10 mL in 1 VIAL, MULTI-DOSE (55150-315-01) </PackageDescription>
<NDC11Code>55150-0315-25</NDC11Code>
<ProductNDC>55150-315</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Succinylcholine Chloride</ProprietaryName>
<NonProprietaryName>Succinylcholine Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20231016</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217808</ApplicationNumber>
<LabelerName>Eugia US LLC</LabelerName>
<SubstanceName>SUCCINYLCHOLINE CHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Depolarizing Neuromuscular Blocker [EPC], Neuromuscular Depolarizing Blockade [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-10-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231016</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Succinylcholine chloride injection is indicated in adults and pediatric patients: 1 as an adjunct to general anesthesia, 2 to facilitate tracheal intubation, 3 to provide skeletal muscle relaxation during surgery or mechanical ventilation.</IndicationAndUsage>
<Description>Succinylcholine chloride injection, USP is a sterile, nonpyrogenic solution to be used as a short-acting, depolarizing neuromuscular blocker for intravenous or intramuscular use. Succinylcholine chloride injection, USP contains succinylcholine chloride, USP as the active pharmaceutical ingredient. Succinylcholine chloride, USP is chemically designated C14H30Cl2N2O4.2H2O and its molecular weight is 397.34. The chemical name of succinylcholine chloride, USP is 2,2'-[(1,4-dioxo-1,4 butanediyl)bis(oxy)]bis[N,N,N-trimethyl-ethanaminium]dichloride. Succinylcholine chloride, USP is a diquaternary base consisting of the dichloride salt of the dicholine ester of succinic acid. It is a white, odorless, slightly bitter powder, very soluble in water. It has the following structural formula:Succinylcholine chloride injection USP, 200 mg/10 mL (20 mg/mL) is intended for multiple-dose administration and contains preservative. Each 1 mL of succinylcholine chloride injection USP, 200 mg/10 mL (20 mg/mL) multiple-dose fliptop vials contains: 20 mg of succinylcholine chloride, USP (equivalent to 22 mg of succinylcholine chloride dihydrate, USP), 1.8 mg of methylparaben and 0.2 mg of propylparaben as preservatives, 4.6 mg of sodium chloride as iso-osmotic agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. The pH of the solution is between 3.0 and 4.5, with an osmolarity of 0.338 mOsm/mL (calc.).</Description>
</NDC>
</NDCList>