RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>76420-366-60</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE, PLASTIC (76420-366-60) </PackageDescription>
    <NDC11Code>76420-0366-60</NDC11Code>
    <ProductNDC>76420-366</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxycodone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Oxycodone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240910</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077712</ApplicationNumber>
    <LabelerName>Asclemed USA, Inc.</LabelerName>
    <SubstanceName>OXYCODONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2025-12-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250527</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Oxycodone hydrochloride is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration [see Warnings and Precautions (5.1)], reserve oxycodone hydrochloride for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or opioid combination products): : 1 Have not been tolerated or are not expected to be tolerated,, 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.</IndicationAndUsage>
    <Description>Oxycodone Hydrochloride Tablets, USP contain oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 10 mg, 15 mg, 20 mg, or 30 mg of oxycodone hydrochloride USP. Oxycodone hydrochloride is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7).  Chemically, oxycodone hydrochloride is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6- one hydrochloride and has the following structural formula. The tablets contain the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, stearic acid. In addition, the 10 mg tablets contain D&amp;C Red #30 aluminum lake, the 15 mg tablets contain D&amp;C Yellow #10 aluminum lake, the 15 mg and 30 mg tablets contain FD&amp;C Blue #1 aluminum lake, and the 20 mg tablets contain FD&amp;C Blue #2 aluminum lake, FD&amp;C Red #40 aluminum lake, and FD&amp;C Yellow #6 aluminum lake. The 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg tablets contain the equivalent of 4.5 mg, 9 mg, 13.5 mg, 18 mg, and 27 mg, respectively, of oxycodone free base.</Description>
  </NDC>
  <NDC>
    <NDCCode>76420-366-01</NDCCode>
    <PackageDescription>100 TABLET in 1 BOTTLE, PLASTIC (76420-366-01) </PackageDescription>
    <NDC11Code>76420-0366-01</NDC11Code>
    <ProductNDC>76420-366</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxycodone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Oxycodone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240910</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077712</ApplicationNumber>
    <LabelerName>Asclemed USA, Inc.</LabelerName>
    <SubstanceName>OXYCODONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2025-12-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250527</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Oxycodone hydrochloride is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration [see Warnings and Precautions (5.1)], reserve oxycodone hydrochloride for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or opioid combination products): : 1 Have not been tolerated or are not expected to be tolerated,, 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.</IndicationAndUsage>
    <Description>Oxycodone Hydrochloride Tablets, USP contain oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 10 mg, 15 mg, 20 mg, or 30 mg of oxycodone hydrochloride USP. Oxycodone hydrochloride is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7).  Chemically, oxycodone hydrochloride is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6- one hydrochloride and has the following structural formula. The tablets contain the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, stearic acid. In addition, the 10 mg tablets contain D&amp;C Red #30 aluminum lake, the 15 mg tablets contain D&amp;C Yellow #10 aluminum lake, the 15 mg and 30 mg tablets contain FD&amp;C Blue #1 aluminum lake, and the 20 mg tablets contain FD&amp;C Blue #2 aluminum lake, FD&amp;C Red #40 aluminum lake, and FD&amp;C Yellow #6 aluminum lake. The 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg tablets contain the equivalent of 4.5 mg, 9 mg, 13.5 mg, 18 mg, and 27 mg, respectively, of oxycodone free base.</Description>
  </NDC>
  <NDC>
    <NDCCode>76420-366-05</NDCCode>
    <PackageDescription>500 TABLET in 1 BOTTLE, PLASTIC (76420-366-05) </PackageDescription>
    <NDC11Code>76420-0366-05</NDC11Code>
    <ProductNDC>76420-366</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxycodone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Oxycodone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240910</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077712</ApplicationNumber>
    <LabelerName>Asclemed USA, Inc.</LabelerName>
    <SubstanceName>OXYCODONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2025-12-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240910</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Oxycodone hydrochloride is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration [see Warnings and Precautions (5.1)], reserve oxycodone hydrochloride for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or opioid combination products): : 1 Have not been tolerated or are not expected to be tolerated,, 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.</IndicationAndUsage>
    <Description>Oxycodone Hydrochloride Tablets, USP contain oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 10 mg, 15 mg, 20 mg, or 30 mg of oxycodone hydrochloride USP. Oxycodone hydrochloride is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7).  Chemically, oxycodone hydrochloride is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6- one hydrochloride and has the following structural formula. The tablets contain the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, stearic acid. In addition, the 10 mg tablets contain D&amp;C Red #30 aluminum lake, the 15 mg tablets contain D&amp;C Yellow #10 aluminum lake, the 15 mg and 30 mg tablets contain FD&amp;C Blue #1 aluminum lake, and the 20 mg tablets contain FD&amp;C Blue #2 aluminum lake, FD&amp;C Red #40 aluminum lake, and FD&amp;C Yellow #6 aluminum lake. The 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg tablets contain the equivalent of 4.5 mg, 9 mg, 13.5 mg, 18 mg, and 27 mg, respectively, of oxycodone free base.</Description>
  </NDC>
  <NDC>
    <NDCCode>76420-366-10</NDCCode>
    <PackageDescription>10 TABLET in 1 BOTTLE, PLASTIC (76420-366-10) </PackageDescription>
    <NDC11Code>76420-0366-10</NDC11Code>
    <ProductNDC>76420-366</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxycodone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Oxycodone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240910</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077712</ApplicationNumber>
    <LabelerName>Asclemed USA, Inc.</LabelerName>
    <SubstanceName>OXYCODONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2025-12-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251227</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Oxycodone hydrochloride is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration [see Warnings and Precautions (5.1)], reserve oxycodone hydrochloride for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or opioid combination products): : 1 Have not been tolerated or are not expected to be tolerated,, 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.</IndicationAndUsage>
    <Description>Oxycodone Hydrochloride Tablets, USP contain oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 10 mg, 15 mg, 20 mg, or 30 mg of oxycodone hydrochloride USP. Oxycodone hydrochloride is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7).  Chemically, oxycodone hydrochloride is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6- one hydrochloride and has the following structural formula. The tablets contain the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, stearic acid. In addition, the 10 mg tablets contain D&amp;C Red #30 aluminum lake, the 15 mg tablets contain D&amp;C Yellow #10 aluminum lake, the 15 mg and 30 mg tablets contain FD&amp;C Blue #1 aluminum lake, and the 20 mg tablets contain FD&amp;C Blue #2 aluminum lake, FD&amp;C Red #40 aluminum lake, and FD&amp;C Yellow #6 aluminum lake. The 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg tablets contain the equivalent of 4.5 mg, 9 mg, 13.5 mg, 18 mg, and 27 mg, respectively, of oxycodone free base.</Description>
  </NDC>
  <NDC>
    <NDCCode>76420-366-30</NDCCode>
    <PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (76420-366-30) </PackageDescription>
    <NDC11Code>76420-0366-30</NDC11Code>
    <ProductNDC>76420-366</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxycodone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Oxycodone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240910</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077712</ApplicationNumber>
    <LabelerName>Asclemed USA, Inc.</LabelerName>
    <SubstanceName>OXYCODONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2025-12-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250527</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Oxycodone hydrochloride is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration [see Warnings and Precautions (5.1)], reserve oxycodone hydrochloride for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or opioid combination products): : 1 Have not been tolerated or are not expected to be tolerated,, 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.</IndicationAndUsage>
    <Description>Oxycodone Hydrochloride Tablets, USP contain oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 10 mg, 15 mg, 20 mg, or 30 mg of oxycodone hydrochloride USP. Oxycodone hydrochloride is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7).  Chemically, oxycodone hydrochloride is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6- one hydrochloride and has the following structural formula. The tablets contain the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, stearic acid. In addition, the 10 mg tablets contain D&amp;C Red #30 aluminum lake, the 15 mg tablets contain D&amp;C Yellow #10 aluminum lake, the 15 mg and 30 mg tablets contain FD&amp;C Blue #1 aluminum lake, and the 20 mg tablets contain FD&amp;C Blue #2 aluminum lake, FD&amp;C Red #40 aluminum lake, and FD&amp;C Yellow #6 aluminum lake. The 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg tablets contain the equivalent of 4.5 mg, 9 mg, 13.5 mg, 18 mg, and 27 mg, respectively, of oxycodone free base.</Description>
  </NDC>
  <NDC>
    <NDCCode>76420-366-90</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE, PLASTIC (76420-366-90) </PackageDescription>
    <NDC11Code>76420-0366-90</NDC11Code>
    <ProductNDC>76420-366</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxycodone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Oxycodone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240910</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077712</ApplicationNumber>
    <LabelerName>Asclemed USA, Inc.</LabelerName>
    <SubstanceName>OXYCODONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2025-12-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250527</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Oxycodone hydrochloride is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration [see Warnings and Precautions (5.1)], reserve oxycodone hydrochloride for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or opioid combination products): : 1 Have not been tolerated or are not expected to be tolerated,, 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.</IndicationAndUsage>
    <Description>Oxycodone Hydrochloride Tablets, USP contain oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 10 mg, 15 mg, 20 mg, or 30 mg of oxycodone hydrochloride USP. Oxycodone hydrochloride is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7).  Chemically, oxycodone hydrochloride is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6- one hydrochloride and has the following structural formula. The tablets contain the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, stearic acid. In addition, the 10 mg tablets contain D&amp;C Red #30 aluminum lake, the 15 mg tablets contain D&amp;C Yellow #10 aluminum lake, the 15 mg and 30 mg tablets contain FD&amp;C Blue #1 aluminum lake, and the 20 mg tablets contain FD&amp;C Blue #2 aluminum lake, FD&amp;C Red #40 aluminum lake, and FD&amp;C Yellow #6 aluminum lake. The 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg tablets contain the equivalent of 4.5 mg, 9 mg, 13.5 mg, 18 mg, and 27 mg, respectively, of oxycodone free base.</Description>
  </NDC>
  <NDC>
    <NDCCode>29300-366-16</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (29300-366-16) </PackageDescription>
    <NDC11Code>29300-0366-16</NDC11Code>
    <ProductNDC>29300-366</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lacosamide</ProprietaryName>
    <NonProprietaryName>Lacosamide</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20241201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213109</ApplicationNumber>
    <LabelerName>Unichem Pharmaceuticals (USA), Inc.</LabelerName>
    <SubstanceName>LACOSAMIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <DEASchedule>CV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2024-12-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lacosamide tablet is indicated for.        Treatment of partial-onset seizures in patients 4 years of age and older (1.1).        Adjunctive therapy in the treatment of primary generalized tonic-clonic seizures in patients 4 years of age and older (1.2).</IndicationAndUsage>
    <Description>The chemical name of lacosamide, USP, the single (R)-enantiomer, is (R)-2-acetamido-N-benzyl-3-methoxypropionamide (IUPAC). Lacosamide, USP is a functionalized amino acid. Its molecular formula is. C13H18N2O3 and its molecular weight is 250.30. The chemical structure is. Lacosamide, USP is a white to light yellow powder. It is freely soluble in methanol, soluble in anhydrous ethanol, sparingly soluble in water, slightly soluble in acetonitrile and practically insoluble in heptane.</Description>
  </NDC>
  <NDC>
    <NDCCode>33261-366-60</NDCCode>
    <PackageDescription>60 CAPSULE in 1 BOTTLE (33261-366-60)</PackageDescription>
    <NDC11Code>33261-0366-60</NDC11Code>
    <ProductNDC>33261-366</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Phentermine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Phentermine Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20120807</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040875</ApplicationNumber>
    <LabelerName>Aidarex Pharmaceuticals LLC</LabelerName>
    <SubstanceName>PHENTERMINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Appetite Suppression [PE],Increased Sympathetic Activity [PE],Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Phentermine hydrochloride is indicated as a short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index ≥30 kg/m2, or ≥27 kg/m2 in the presence of other risk factors (e.g., hypertension, diabetes, hyperlipidemia). Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. The limited usefulness of agents of this class (see CLINICAL PHARMACOLOGY) should be measured against possible risk factors inherent in their use such as those described below.</IndicationAndUsage>
    <Description>Phentermine hydrochloride has the chemical name of α, α, -Dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride, is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols; slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride, an anorectic agent for oral administration, is available as. a) powder-filled capsules containing 15 mg Phentermine hydrochloride (equivalent to 12 mg Phentermine) or 30 mg Phentermine hydrochloride (equivalent to 24 mg Phentermine) and inactive ingredients: corn starch, gelatin, lactose monohydrate and magnesium stearate. In addition, the 15 mg capsules contain D&amp;C Yellow #10, FD&amp;C Blue #1, FD&amp;C Red #3, FD&amp;C Red #40, titanium dioxide and the 30 mg capsules contain D&amp;C Yellow #10, FD&amp;C Red #3, titanium dioxide. b) bead-filled capsules containing 30 mg Phentermine hydrochloride (equivalent to 24 mg Phentermine) and inactive ingredients: corn starch, sucrose, hypromellose, povidone, and talc. In addition, the capsule contains FD&amp;C blue #1/Brilliant blue FCF aluminum lake, D&amp;C red #28 and gelatin.</Description>
  </NDC>
  <NDC>
    <NDCCode>43063-366-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (43063-366-60)</PackageDescription>
    <NDC11Code>43063-0366-60</NDC11Code>
    <ProductNDC>43063-366</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Zolpidem Tartrate</ProprietaryName>
    <NonProprietaryName>Zolpidem Tartrate</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20081121</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078616</ApplicationNumber>
    <LabelerName>PD-Rx Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>ZOLPIDEM TARTRATE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>gamma-Aminobutyric Acid-ergic Agonist [EPC],GABA A Agonists [MoA],Pyridines [Chemical/Ingredient],Central Nervous System Depression [PE]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2017-05-17</LastUpdate>
  </NDC>
  <NDC>
    <NDCCode>46708-366-06</NDCCode>
    <PackageDescription>60 BLISTER PACK in 1 CARTON (46708-366-06)  / 6 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>46708-0366-06</NDC11Code>
    <ProductNDC>46708-366</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clonazepam</ProprietaryName>
    <NonProprietaryName>Clonazepam</NonProprietaryName>
    <DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190701</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211033</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
    <SubstanceName>CLONAZEPAM</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2023-01-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190701</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Seizure Disorders: Clonazepam orally disintegrating tablet is useful alone or as an adjunct in the treatment of the Lennox-Gastaut syndrome (petit mal variant), akinetic and myoclonic seizures. In patients with absence seizures (petit mal) who have failed to respond to succinimides, clonazepam orally disintegrating tablets may be useful. In some studies, up to 30% of patients have shown a loss of anticonvulsant activity, often within 3 months of administration. In some cases, dosage adjustment may reestablish efficacy. Panic Disorder: Clonazepam orally disintegrating tablet is indicated for the treatment of panic disorder, with or without agoraphobia, as defined in DSM-V. Panic disorder is characterized by the occurrence of unexpected panic attacks and associated concern about having additional attacks, worry about the implications or consequences of the attacks, and/or a significant change in behavior related to the attacks. The efficacy of clonazepam orally disintegrating tablets was established in two 6- to 9-week trials in panic disorder patients whose diagnoses corresponded to the DSM-IIIR category of panic disorder (see CLINICAL PHARMACOLOGY: Clinical Trials). Panic disorder (DSM-V) is characterized by recurrent unexpected panic attacks, ie, a discrete period of intense fear or discomfort in which four (or more) of the following symptoms develop abruptly and reach a peak within 10 minutes: (1) palpitations, pounding heart or accelerated heart rate; (2) sweating; (3) trembling or shaking; (4) sensations of shortness of breath or smothering; (5) feeling of choking; (6) chest pain or discomfort; (7) nausea or abdominal distress; (8) feeling dizzy, unsteady, lightheaded or faint; (9) derealization (feelings of unreality) or depersonalization (being detached from oneself); (10) fear of losing control; (11) fear of dying; (12) paresthesias (numbness or tingling sensations); (13) chills or hot flushes. The effectiveness of clonazepam orally disintegrating tablets in long-term use, that is, for more than 9 weeks, has not been systematically studied in controlled clinical trials. The physician who elects to use clonazepam orally disintegrating tablets for extended periods should periodically reevaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
    <Description>Clonazepam, USP a benzodiazepine, is available as an orally disintegrating tablet containing 0.125 mg, 0.25 mg, 0.5 mg, 1 mg or 2 mg clonazepam, USP. Each orally disintegrating tablet also contains sorbitol, aspartame, sodium lauryl sulfate, crospovidone, mannitol, colloidal silicon dioxide, talc and magnesium stearate. Chemically, clonazepam, USP is 5-(2-chlorophenyl)-1,3-dihydro-7-nitro-2H-1,4-­benzodiazepin-2-one. It is a light yellow powder. It has a molecular weight of 315.72 and the following structural formula.</Description>
  </NDC>
  <NDC>
    <NDCCode>55700-366-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (55700-366-60) </PackageDescription>
    <NDC11Code>55700-0366-60</NDC11Code>
    <ProductNDC>55700-366</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Morphine Sulfate</ProprietaryName>
    <NonProprietaryName>Morphine Sulfate</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20151026</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203849</ApplicationNumber>
    <LabelerName>Lake Erie Medical DBA Quality Care Products LLC</LabelerName>
    <SubstanceName>MORPHINE SULFATE</SubstanceName>
    <StrengthNumber>15</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2021-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160122</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Morphine sulfate extended-release tablets are indicated for the management of pain severe enough to require daily, around-the-clock, long-term opioid treatment and for which alternative treatment options are inadequate.Limitations of Use : 1 Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses, and because of the greater risks of overdose and death with extended-release opioid formulations, reserve morphine sulfate extended-release for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or immediate-release opioids) are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.</IndicationAndUsage>
    <Description>Morphine sulfate extended-release tablets are for oral use and contain morphine sulfate, USP, an agonist at the mu-opioid receptor. Each tablet contains the following inactive ingredients common to all strengths: anhydrous lactose, cetostearyl alcohol, hydroxyethyl cellulose, magnesium stearate, polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide. The 30 mg tablets also contain yellow iron oxide. The 60 mg tablets also contain red iron oxide. The 100 mg and 200 mg tablets also contain red iron oxide and yellow iron oxide. The tablet strengths describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate). Morphine sulfate, USP is an odorless, white, crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol: water partition coefficient of morphine is 1.42 at physiologic pH and the pKb is 7.9 for the tertiary nitrogen (mostly ionized at pH 7.4). Its structural formula is.</Description>
  </NDC>
  <NDC>
    <NDCCode>60429-366-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (60429-366-60)</PackageDescription>
    <NDC11Code>60429-0366-60</NDC11Code>
    <ProductNDC>60429-366</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxcarbazepine</ProprietaryName>
    <NonProprietaryName>Oxcarbazepine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20080409</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077747</ApplicationNumber>
    <LabelerName>Golden State Medical Supply, Inc.</LabelerName>
    <SubstanceName>OXCARBAZEPINE</SubstanceName>
    <StrengthNumber>600</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-10-11</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>62332-366-06</NDCCode>
    <PackageDescription>60 BLISTER PACK in 1 CARTON (62332-366-06)  / 6 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>62332-0366-06</NDC11Code>
    <ProductNDC>62332-366</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clonazepam</ProprietaryName>
    <NonProprietaryName>Clonazepam</NonProprietaryName>
    <DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190701</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211033</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>CLONAZEPAM</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2025-11-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190701</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Seizure Disorders: Clonazepam orally disintegrating tablet is useful alone or as an adjunct in the treatment of the Lennox-Gastaut syndrome (petit mal variant), akinetic and myoclonic seizures. In patients with absence seizures (petit mal) who have failed to respond to succinimides, clonazepam orally disintegrating tablets may be useful. In some studies, up to 30% of patients have shown a loss of anticonvulsant activity, often within 3 months of administration. In some cases, dosage adjustment may reestablish efficacy. Panic Disorder: Clonazepam orally disintegrating tablet is indicated for the treatment of panic disorder, with or without agoraphobia, as defined in DSM-V. Panic disorder is characterized by the occurrence of unexpected panic attacks and associated concern about having additional attacks, worry about the implications or consequences of the attacks, and/or a significant change in behavior related to the attacks. The efficacy of clonazepam orally disintegrating tablets was established in two 6- to 9-week trials in panic disorder patients whose diagnoses corresponded to the DSM-IIIR category of panic disorder (see CLINICAL PHARMACOLOGY: Clinical Trials). Panic disorder (DSM-V) is characterized by recurrent unexpected panic attacks, ie, a discrete period of intense fear or discomfort in which four (or more) of the following symptoms develop abruptly and reach a peak within 10 minutes: (1) palpitations, pounding heart or accelerated heart rate; (2) sweating; (3) trembling or shaking; (4) sensations of shortness of breath or smothering; (5) feeling of choking; (6) chest pain or discomfort; (7) nausea or abdominal distress; (8) feeling dizzy, unsteady, lightheaded or faint; (9) derealization (feelings of unreality) or depersonalization (being detached from oneself); (10) fear of losing control; (11) fear of dying; (12) paresthesias (numbness or tingling sensations); (13) chills or hot flushes. The effectiveness of clonazepam orally disintegrating tablets in long-term use, that is, for more than 9 weeks, has not been systematically studied in controlled clinical trials. The physician who elects to use clonazepam orally disintegrating tablets for extended periods should periodically reevaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
    <Description>Clonazepam, USP a benzodiazepine, is available as an orally disintegrating tablet containing 0.125 mg, 0.25 mg, 0.5 mg, 1 mg or 2 mg clonazepam, USP. Each orally disintegrating tablet also contains sorbitol, aspartame, sodium lauryl sulfate, crospovidone, mannitol, colloidal silicon dioxide, talc and magnesium stearate. Chemically, clonazepam, USP is 5-(2-chlorophenyl)-1,3-dihydro-7-nitro-2H-1,4-­benzodiazepin-2-one. It is a light yellow powder. It has a molecular weight of 315.72 and the following structural formula.</Description>
  </NDC>
  <NDC>
    <NDCCode>63187-366-60</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (63187-366-60) </PackageDescription>
    <NDC11Code>63187-0366-60</NDC11Code>
    <ProductNDC>63187-366</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Acyclovir</ProprietaryName>
    <NonProprietaryName>Acyclovir</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140910</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204314</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>ACYCLOVIR</SubstanceName>
    <StrengthNumber>800</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-01-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160818</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Herpes Zoster Infections: Acyclovir tablets are indicated for the acute treatment of herpes zoster (shingles). Genital Herpes: Acyclovir tablets are indicated for the treatment of initial episodes and the management of recurrent episodes of genital herpes. Chickenpox: Acyclovir tablets are indicated for the treatment of chickenpox (varicella).</IndicationAndUsage>
    <Description>Acyclovir is a synthetic nucleoside analogue active against herpesviruses. Acyclovir tablets are formulations for oral administration. Acyclovir is a white or almost white, crystalline powder with the molecular formula C8H11N5O3 and a molecular weight of 225.20. It is soluble in diluted hydrochloric acid; slightly soluble in water and insoluble in alcohol. The pka’s of acyclovir are 2.27 and 9.25. The chemical name of acyclovir is 2-amino-1,9-dihydro-9-[(2-hydroxyethoxy)methyl]-6H-purin-6-one; it has the following structural formula. Each acyclovir tablet intended for oral administration contains 400 mg and 800 mg of acyclovir. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch and sodium starch glycolate.</Description>
  </NDC>
  <NDC>
    <NDCCode>66116-366-60</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (66116-366-60)</PackageDescription>
    <NDC11Code>66116-0366-60</NDC11Code>
    <ProductNDC>66116-366</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ibuprofen</ProprietaryName>
    <NonProprietaryName>Ibuprofen</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20091123</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078558</ApplicationNumber>
    <LabelerName>MedVantx, Inc.</LabelerName>
    <SubstanceName>IBUPROFEN</SubstanceName>
    <StrengthNumber>400</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Carefully consider the potential benefits and risks of Ibuprofen Tablets, USP and other treatment options before deciding to use Ibuprofen Tablets, USP. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ibuprofen Tablets, USP are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen Tablets, USP are indicated for relief of mild to moderate pain. Ibuprofen Tablets, USP are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of Ibuprofen Tablets, USP in children have not been conducted.</IndicationAndUsage>
    <Description>Ibuprofen Tablets, USP contain the active ingredient ibuprofen, which is (±) – 2 – (p – isobutylphenyl) propionic acid.  Ibuprofen is a white powder with a melting point of 74-77° C and is very slightly soluble in water (&lt;1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula is represented below. Ibuprofen Tablets, USP, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, pregelatinized starch, talc, stearic acid, and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>68382-366-14</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (68382-366-14) </PackageDescription>
    <NDC11Code>68382-0366-14</NDC11Code>
    <ProductNDC>68382-366</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Olanzapine</ProprietaryName>
    <NonProprietaryName>Olanzapine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190103</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090459</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>OLANZAPINE</SubstanceName>
    <StrengthNumber>7.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-05-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190103</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Olanzapine tablets are an atypical antipsychotic indicated:. As oral formulation for the: : 1 Treatment of schizophrenia. (1.1)Adults: Efficacy was established in three clinical trials in patients with schizophrenia: two 6 week trials and one maintenance trial. (14.1)Adolescents (ages 13 to 17 years): Efficacy was established in one 6- week trial in patients with schizophrenia (14.1). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.1).</IndicationAndUsage>
    <Description>Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is. Olanzapine, USP is a yellow crystalline solid, soluble in n-propanol, sparingly soluble in acetonitrile, slightly soluble in methanol and in dehydrated alcohol and practically insoluble in water. Olanzapine tablets are intended for oral administration only. Each olanzapine tablet intended for oral administration contains olanzapine equivalent to 2.5 mg (8 µmol) or 5 mg (16 µmol) or 7.5 mg (24 µmol) or 10 mg (32 µmol) or 15 mg (48 µmol) or 20 mg (64 µmol). In addition, each tablet contains the following inactive ingredients: crospovidone, hypromellose, lactose monohydrate, lecithin, magnesium stearate, talc, titanium dioxide and xanthan gum.</Description>
  </NDC>
  <NDC>
    <NDCCode>71205-366-60</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (71205-366-60) </PackageDescription>
    <NDC11Code>71205-0366-60</NDC11Code>
    <ProductNDC>71205-366</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fenofibrate</ProprietaryName>
    <NonProprietaryName>Fenofibrate</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20151123</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204019</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>FENOFIBRATE</SubstanceName>
    <StrengthNumber>54</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Peroxisome Proliferator Receptor alpha Agonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-01-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fenofibrate tablet USP is a peroxisome proliferator-activated receptor (PPAR) alpha agonist indicated as an adjunct to diet: 1 To reduce elevated LDL-C, Total-C, TG and Apo B, and to increase HDL-C in adult patients with primary hypercholesterolemia or mixed dyslipidemia (1.1)., 2 For treatment of adult patients with severe hypertriglyceridemia (1.2).</IndicationAndUsage>
    <Description>Fenofibrate, is a lipid regulating agent available as tablets for oral administration. Each tablet contains 54 mg or 160 mg of fenofibrate. The chemical name for fenofibrate is 2-[4-(4-chlorobenzoyl) phenoxy]-2-methyl-propanoic acid, 1-methylethyl ester with the following structural formula. The empirical formula is C20H21ClO4 and the molecular weight is 360.8; fenofibrate is very soluble in methylene chloride, slightly soluble in alcohol and practically insoluble in water. The melting point is 79 to 82°C. Fenofibrate is a white or almost white, crystalline powder, non-hydroscopic which is stable under ordinary conditions. Each fenofibrate tablet USP, contains the following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose 2910, lactose monohydrate, microcrystalline cellulose, simethicone emulsion (30%), sodium lauryl sulphate, sodium starch glycolate and sodium stearyl fumarate. The film-coating material contains polyethylene glycol 3350, polyethylene glycol 6000, polyvinyl alcohol, talc and titanium dioxide. Each fenofibrate tablet USP, 54 mg contains iron oxide yellow as an additional film coating ingredient. Fenofibrate tablet USP complies as per USP dissolution test 3.</Description>
  </NDC>
  <NDC>
    <NDCCode>71610-366-53</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (71610-366-53) </PackageDescription>
    <NDC11Code>71610-0366-53</NDC11Code>
    <ProductNDC>71610-366</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clonazepam</ProprietaryName>
    <NonProprietaryName>Clonazepam</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19960917</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074569</ApplicationNumber>
    <LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
    <SubstanceName>CLONAZEPAM</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2023-01-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191120</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Clonazepam tablets are useful alone or as an adjunct in the treatment of the Lennox-Gastaut syndrome (petit mal variant), akinetic, and myoclonic seizures. In patients with absence seizures (petit mal) who have failed to respond to succinimides, clonazepam tablets may be useful. Some loss of effect may occur during the course of clonazepam treatment (see PRECAUTIONS: Loss of Effect).</IndicationAndUsage>
    <Description>Each tablet, for oral administration, contains 0.5 mg, 1 mg, or 2 mg clonazepam, USP, a benzodiazepine. Each tablet also contains corn starch, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and povidone. Clonazepam tablets USP 0.5 mg contain Yellow D&amp;C No. 10 Aluminum Lake. Clonazepam tablets USP 1 mg contain Yellow D&amp;C No. 10 Aluminum Lake, as well as FD&amp;C Blue No. 1 Aluminum Lake. Chemically, clonazepam, USP is 5-(o-chlorophenyl)-1,3-dihydro-7-nitro-2H-1,4-benzodiazepin-2-one. It is a light yellow crystalline powder. It has the following structural formula. C15H10ClN3O3 M.W. 315.72.</Description>
  </NDC>
  <NDC>
    <NDCCode>71610-366-60</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE (71610-366-60) </PackageDescription>
    <NDC11Code>71610-0366-60</NDC11Code>
    <ProductNDC>71610-366</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clonazepam</ProprietaryName>
    <NonProprietaryName>Clonazepam</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19960917</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074569</ApplicationNumber>
    <LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
    <SubstanceName>CLONAZEPAM</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2023-01-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191120</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Clonazepam tablets are useful alone or as an adjunct in the treatment of the Lennox-Gastaut syndrome (petit mal variant), akinetic, and myoclonic seizures. In patients with absence seizures (petit mal) who have failed to respond to succinimides, clonazepam tablets may be useful. Some loss of effect may occur during the course of clonazepam treatment (see PRECAUTIONS: Loss of Effect).</IndicationAndUsage>
    <Description>Each tablet, for oral administration, contains 0.5 mg, 1 mg, or 2 mg clonazepam, USP, a benzodiazepine. Each tablet also contains corn starch, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and povidone. Clonazepam tablets USP 0.5 mg contain Yellow D&amp;C No. 10 Aluminum Lake. Clonazepam tablets USP 1 mg contain Yellow D&amp;C No. 10 Aluminum Lake, as well as FD&amp;C Blue No. 1 Aluminum Lake. Chemically, clonazepam, USP is 5-(o-chlorophenyl)-1,3-dihydro-7-nitro-2H-1,4-benzodiazepin-2-one. It is a light yellow crystalline powder. It has the following structural formula. C15H10ClN3O3 M.W. 315.72.</Description>
  </NDC>
  <NDC>
    <NDCCode>72189-366-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (72189-366-60) </PackageDescription>
    <NDC11Code>72189-0366-60</NDC11Code>
    <ProductNDC>72189-366</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Quetiapine Fumarate</ProprietaryName>
    <NonProprietaryName>Quetiapine Fumarate</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220727</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA201504</ApplicationNumber>
    <LabelerName>Direct_Rx</LabelerName>
    <SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220727</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>1.1 Schizophrenia. Quetiapine is indicated for the treatment of schizophrenia. The efficacy of quetiapine in schizophrenia was established in three 6-week trials in adults and one 6-week trial in adolescents (13 to 17 years). The effectiveness of quetiapine for the maintenance treatment of schizophrenia has not been systematically evaluated in controlled clinical trials [see CLINICAL STUDIES (14.1)]. 1.2 Bipolar Disorder. Quetiapine is indicated for the acute treatment of manic episodes associated with bipolar I disorder, both as monotherapy and as an adjunct to lithium or divalproex. Efficacy was established in two 12-week monotherapy trials in adults, in one 3-week adjunctive trial in adults, and in one 3-week monotherapy trial in pediatric patients (10 to 17 years) [see CLINICAL STUDIES (14.2)]. Quetiapine is indicated as monotherapy for the acute treatment of depressive episodes associated with bipolar disorder. Efficacy was established in two 8-week monotherapy trials in adult patients with bipolar I and bipolar II disorder [see CLINICAL STUDIES (14.2)]. Quetiapine is indicated for the maintenance treatment of bipolar I disorder, as an adjunct to lithium or divalproex. Efficacy was established in two maintenance trials in adults. The effectiveness of quetiapine as monotherapy for the maintenance treatment of bipolar disorder has not been systematically evaluated in controlled clinical trials [see CLINICAL STUDIES (14.2)]. 1.3 Special Considerations in Treating Pediatric Schizophrenia and Bipolar I Disorder. Pediatric schizophrenia and bipolar I disorder are serious mental disorders, however, diagnosis can be challenging. For pediatric schizophrenia, symptom profiles can be variable, and for bipolar I disorder, patients may have variable patterns of periodicity of manic or mixed symptoms. It is recommended that medication therapy for pediatric schizophrenia and bipolar I disorder be initiated only after a thorough diagnostic evaluation has been performed and careful consideration given to the risks associated with medication treatment. Medication treatment for both pediatric schizophrenia and bipolar I disorder is indicated as part of a total treatment program that often includes psychological, educational and social interventions.</IndicationAndUsage>
    <Description>Quetiapine is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [b,f] [1,4]thiazepin-11-yl-1-piperazinyl) ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C42H50N6O4S2C4H4O4 and it has a molecular weight of 883.11 (fumarate salt). The structural formula is: [Structure]. Quetiapine fumarate is a white to off-white crystalline powder which is moderately soluble in water. Quetiapine tablets, USP is supplied for oral administration as 25 mg (round peach), 50 mg (round, white), 100 mg (round yellow), 150 mg (round, off white to light yellow), 200 mg (round, white), 300 mg (capsule-shaped, white), and 400 mg (capsule-shaped, yellow) tablets. Inactive ingredients are povidone, dibasic dicalcium phosphate dihydrate, microcrystalline cellulose, sodium starch glycolate, lactose monohydrate, magnesium stearate, hypromellose, polyethylene glycol and titanium dioxide. The 25 mg tablets contain red iron oxide and yellow iron oxide and the 100 mg, 150 mg and 400 mg tablets contain only yellow iron oxide. Each 25 mg tablet contains 28.78 mg of quetiapine fumarate equivalent to 25 mg quetiapine. Each 50 mg tablet contains 57.56 mg of quetiapine fumarate equivalent to 50 mg quetiapine. Each 100 mg tablet contains 115.13 mg of quetiapine fumarate equivalent to 100 mg quetiapine. Each 150 mg tablet contains 172.70 mg of quetiapine fumarate equivalent to 150 mg quetiapine. Each 200 mg tablet contains 230.27 mg of quetiapine fumarate equivalent to 200 mg quetiapine. Each 300 mg tablet contains 345.40 mg of quetiapine fumarate equivalent to 300 mg quetiapine. Each 400 mg tablet contains 460.54 mg of quetiapine fumarate equivalent to 400 mg quetiapine. The USP dissolution test is pending.</Description>
  </NDC>
  <NDC>
    <NDCCode>83566-366-01</NDCCode>
    <PackageDescription>60 mL in 1 BOTTLE (83566-366-01) </PackageDescription>
    <NDC11Code>83566-0366-01</NDC11Code>
    <ProductNDC>83566-366</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Eghmtw Hair Growth Oil</ProprietaryName>
    <NonProprietaryName>Minoxidil</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20240615</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M032</ApplicationNumber>
    <LabelerName>Guangdong Aimu Biological Technology Co., Ltd</LabelerName>
    <SubstanceName>MINOXIDIL; PANTHENOL</SubstanceName>
    <StrengthNumber>5; 1</StrengthNumber>
    <StrengthUnit>g/100mL; g/100mL</StrengthUnit>
    <Pharm_Classes>Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-06-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240615</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>76420-009-60</NDCCode>
    <PackageDescription>60 CAPSULE in 1 BOTTLE (76420-009-60) </PackageDescription>
    <NDC11Code>76420-0009-60</NDC11Code>
    <ProductNDC>76420-009</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Celecoxib</ProprietaryName>
    <NonProprietaryName>Celecoxib</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20160316</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204590</ApplicationNumber>
    <LabelerName>Asclemed USA, Inc.</LabelerName>
    <SubstanceName>CELECOXIB</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-09-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200604</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Celecoxib capsules are indicated.</IndicationAndUsage>
    <Description>Celecoxib is a nonsteroidal anti-inflammatory drug, available as capsules containing 200 mg celecoxib USP for oral administration. The chemical name is 4-[5-(4-methylphenyl)-3-(trifluoromethyl)-1H-pyrazol-1-yl] benzenesulfonamide and is a diaryl-substituted pyrazole. The molecular weight is 381.38. Its molecular formula is C 17H 14F 3N 3O 2S, and it has the following chemical structure:. Celecoxib USP is a white to off-white powder with a pKa of 11.1 (sulfonamide moiety). Celecoxib USP is hydrophobic (log P is 3.5) and is practically insoluble in aqueous media at physiological pH range. The inactive ingredients in celecoxib capsules include: gelatin, lactose monohydrate, magnesium stearate, povidone, sodium lauryl sulfate, hydroxypropyl cellulose, crospovidone and titanium dioxide. The imprinting ink of capsule shell of the 200 mg capsule contains the following inactive ingredients: shellac, propylene glycol, strong ammonia solution and yellow iron oxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>76420-010-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (76420-010-60) </PackageDescription>
    <NDC11Code>76420-0010-60</NDC11Code>
    <ProductNDC>76420-010</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170928</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078722</ApplicationNumber>
    <LabelerName>Asclemed USA, Inc.</LabelerName>
    <SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>7.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-05-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200123</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
    <Description>Cyclobenzaprine hydrochloride, USP is a white to off-white crystalline powder with the molecular formula C 20H 21NHCl and a molecular weight of 311.9. It has a melting point of 217° C, and a pK aof 8.47 at 25° C. It is freely soluble in water, in alcohol and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride and insoluble in hydrocarbons. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-(5H-dibenzo[a,d] cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine hydrochloride tablets, USP are supplied as 7.5 mg tablets for oral administration. Cyclobenzaprine hydrochloride 7.5 mg tablets contain the following inactive ingredients: corn starch, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, pregelatinized starch, talc and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>76420-011-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (76420-011-60) </PackageDescription>
    <NDC11Code>76420-0011-60</NDC11Code>
    <ProductNDC>76420-011</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170531</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208170</ApplicationNumber>
    <LabelerName>Asclemed USA, Inc.</LabelerName>
    <SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200123</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets should be used only for short periods (up to 2 or 3 weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
    <Description>Cyclobenzaprine hydrochloride, USP is a tricyclic amine salt which is white to off white, odourless, crystalline powder with the molecular formula C 20H 21N  HCl and a molecular weight of 311.9. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water, in alcohol and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride, insoluble in n-hexane. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-(5H -dibenzo[a,d] cyclohepten-5-ylidene)- N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine hydrochloride tablets, USP are available as 10 mg tablets for oral administration. Each 10 mg tablet contains cyclobenzaprine hydrochloride and the following inactive ingredients: crospovidone, D&amp;C Yellow #10 Aluminum Lake, FD&amp;C Yellow #6 Sunset Yellow FCF Aluminum Lake, hypromellose, lactose anhydrous, macrogol, magnesium stearate, polysorbate 80, pregelatinized starch, silicified microcrystalline cellulose, titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>76420-015-60</NDCCode>
    <PackageDescription>60 CAPSULE in 1 BOTTLE (76420-015-60) </PackageDescription>
    <NDC11Code>76420-0015-60</NDC11Code>
    <ProductNDC>76420-015</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gabapentin</ProprietaryName>
    <NonProprietaryName>Gabapentin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140403</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075350</ApplicationNumber>
    <LabelerName>Asclemed USA, Inc.</LabelerName>
    <SubstanceName>GABAPENTIN</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-10-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200123</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Gabapentin capsules are indicated for: 1 Management of postherpetic neuralgia in adults, 2 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy.</IndicationAndUsage>
    <Description>The active ingredient in gabapentin capsules, USP is gabapentin, USP which has the chemical name 1-(aminomethyl)cyclohexaneacetic acid. The molecular formula of gabapentin, USP is C 9H 17NO 2 and the molecular weight is 171.24. The structural formula of gabapentin, USP is:. Gabapentin, USP is a white to off-white crystalline solid with a pK a1 of 3.7 and a pK a2 of 10.7. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is -1.25. Each gabapentin capsule contains 100 mg, or 300 mg of gabapentin, USP and the following inactive ingredients: black iron oxide, corn starch, D&amp;C Yellow #10 aluminum lake, FD&amp;C blue #1 aluminum lake, FD&amp;C blue #2 aluminum lake, FD&amp;C red #40 aluminum lake, gelatin, mannitol, pharmaceutical glaze, propylene glycol, red iron oxide T3469, silicon dioxide, sodium lauryl sulfate, synthetic black iron oxide, talc, titanium dioxide, and yellow iron oxide T3506.</Description>
  </NDC>
  <NDC>
    <NDCCode>76420-019-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (76420-019-60) </PackageDescription>
    <NDC11Code>76420-0019-60</NDC11Code>
    <ProductNDC>76420-019</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180116</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078722</ApplicationNumber>
    <LabelerName>Asclemed USA, Inc.</LabelerName>
    <SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>7.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-04-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200604</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
    <Description>Cyclobenzaprine hydrochloride, USP is a white to off-white crystalline powder with the molecular formula C 20H 21NHCl and a molecular weight of 311.9. It has a melting point of 217° C, and a pK a of 8.47 at 25° C. It is freely soluble in water, in alcohol and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride and insoluble in hydrocarbons. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-( 5H-dibenzo[ a,d] cyclohepten-5-ylidene)- N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula:. Cyclobenzaprine hydrochloride tablets, USP are supplied as a 7.5 mg tablets for oral administration. Cyclobenzaprine hydrochloride 7.5 mg tablets contain the following inactive ingredients: corn starch, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, pregelatinized starch, talc and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>76420-020-60</NDCCode>
    <PackageDescription>60 CAPSULE in 1 BOTTLE (76420-020-60) </PackageDescription>
    <NDC11Code>76420-0020-60</NDC11Code>
    <ProductNDC>76420-020</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gabapentin</ProprietaryName>
    <NonProprietaryName>Gabapentin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20171205</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090705</ApplicationNumber>
    <LabelerName>Asclemed USA, Inc.</LabelerName>
    <SubstanceName>GABAPENTIN</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2020-06-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200610</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Gabapentin capsules are indicated for: 1 Management of postherpetic neuralgia in adults, 2 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy.</IndicationAndUsage>
    <Description>The active ingredient in gabapentin capsules is gabapentin, USP which has the chemical name 1-(aminomethyl) cyclohexane acetic acid. The molecular formula of gabapentin is C 9H 17NO 2 and the molecular weight is 171.24. The structural formula of gabapentin is:. Gabapentin, USP is a white to off-white crystalline solid with a pK a1 of 3.7 and a pK a2 of 10.7. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.25. Gabapentin Capsules, USP are supplied as imprinted hard gelatin capsules containing 300 mg of gabapentin, USP. The inactive ingredients are mannitol, pre-gelatinized starch and talc. The 300 mg capsule contains FD&amp;C Red 40, D&amp;C Yellow 10 and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>76420-024-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (76420-024-60) </PackageDescription>
    <NDC11Code>76420-0024-60</NDC11Code>
    <ProductNDC>76420-024</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Eszopiclone</ProprietaryName>
    <NonProprietaryName>Eszopiclone</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20150131</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202929</ApplicationNumber>
    <LabelerName>Asclemed USA, Inc.</LabelerName>
    <SubstanceName>ESZOPICLONE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <DEASchedule>CIV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2025-02-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200617</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Eszopiclone tablets are indicated for the treatment of insomnia. In controlled outpatient and sleep laboratory studies, eszopiclone tablets administered at bedtime decreased sleep latency and improved sleep maintenance. The clinical trials performed in support of efficacy were up to 6 months in duration. The final formal assessments of sleep latency and maintenance were performed at 4 weeks in the 6-week study (adults only), at the end of both 2-week studies (elderly only) and at the end of the 6-month study (adults only).</IndicationAndUsage>
    <Description>Eszopiclone, USP is a nonbenzodiazepine hypnotic agent that is a pyrrolopyrazine derivative of the cyclopyrrolone class. The chemical name of eszopiclone is (+)-(5S)-6-(5chloropyridin-2-yl)-7-oxo-6,7-dihydro-5H-pyrrolo[3,4-b] pyrazin-5-yl 4-methylpiperazine-1carboxylate. Its molecular weight is 388.81, and its empirical formula is C 17H 17C lN 6O 3. Eszopiclone, USP has a single chiral center with an (S)-configuration. It has the following chemical structure:. Eszopiclone, USP is a white to light-yellow crystalline solid. Eszopiclone is very slightly soluble in water, slightly soluble in ethanol, and soluble in phosphate buffer (pH 3.2). Eszopiclone, USP is formulated as film-coated tablets for oral administration. Eszopiclone tablets, USP contain 1 mg, 2 mg, or 3 mg eszopiclone, USP and the following inactive ingredients: dibasic calcium phosphate dihydrate, colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide, and triacetin. In addition, both the 1 mg and 3 mg tablets contain FD&amp;C Blue #2.</Description>
  </NDC>
  <NDC>
    <NDCCode>76420-026-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (76420-026-60) </PackageDescription>
    <NDC11Code>76420-0026-60</NDC11Code>
    <ProductNDC>76420-026</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Eszopiclone</ProprietaryName>
    <NonProprietaryName>Eszopiclone</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20150131</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202929</ApplicationNumber>
    <LabelerName>Asclemed USA, Inc.</LabelerName>
    <SubstanceName>ESZOPICLONE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <DEASchedule>CIV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2025-02-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200617</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Eszopiclone tablets are indicated for the treatment of insomnia. In controlled outpatient and sleep laboratory studies, eszopiclone tablets administered at bedtime decreased sleep latency and improved sleep maintenance. The clinical trials performed in support of efficacy were up to 6 months in duration. The final formal assessments of sleep latency and maintenance were performed at 4 weeks in the 6-week study (adults only), at the end of both 2-week studies (elderly only) and at the end of the 6-month study (adults only).</IndicationAndUsage>
    <Description>Eszopiclone, USP is a nonbenzodiazepine hypnotic agent that is a pyrrolopyrazine derivative of the cyclopyrrolone class. The chemical name of eszopiclone is (+)-(5S)-6-(5chloropyridin-2-yl)-7-oxo-6,7-dihydro-5H-pyrrolo[3,4-b] pyrazin-5-yl 4-methylpiperazine-1carboxylate. Its molecular weight is 388.81, and its empirical formula is C 17H 17C lN 6O 3. Eszopiclone, USP has a single chiral center with an (S)-configuration. It has the following chemical structure:. Eszopiclone, USP is a white to light-yellow crystalline solid. Eszopiclone is very slightly soluble in water, slightly soluble in ethanol, and soluble in phosphate buffer (pH 3.2). Eszopiclone, USP is formulated as film-coated tablets for oral administration. Eszopiclone tablets, USP contain 1 mg, 2 mg, or 3 mg eszopiclone, USP and the following inactive ingredients: dibasic calcium phosphate dihydrate, colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide, and triacetin. In addition, both the 1 mg and 3 mg tablets contain FD&amp;C Blue #2.</Description>
  </NDC>
  <NDC>
    <NDCCode>76420-027-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (76420-027-60) </PackageDescription>
    <NDC11Code>76420-0027-60</NDC11Code>
    <ProductNDC>76420-027</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Eszopiclone</ProprietaryName>
    <NonProprietaryName>Eszopiclone</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140425</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202929</ApplicationNumber>
    <LabelerName>Asclemed USA, Inc.</LabelerName>
    <SubstanceName>ESZOPICLONE</SubstanceName>
    <StrengthNumber>3</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <DEASchedule>CIV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2025-02-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200617</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Eszopiclone tablets are indicated for the treatment of insomnia. In controlled outpatient and sleep laboratory studies, eszopiclone tablets administered at bedtime decreased sleep latency and improved sleep maintenance. The clinical trials performed in support of efficacy were up to 6 months in duration. The final formal assessments of sleep latency and maintenance were performed at 4 weeks in the 6-week study (adults only), at the end of both 2-week studies (elderly only) and at the end of the 6-month study (adults only).</IndicationAndUsage>
    <Description>Eszopiclone, USP is a nonbenzodiazepine hypnotic agent that is a pyrrolopyrazine derivative of the cyclopyrrolone class. The chemical name of eszopiclone is (+)-(5S)-6-(5chloropyridin-2-yl)-7-oxo-6,7-dihydro-5H-pyrrolo[3,4-b] pyrazin-5-yl 4-methylpiperazine-1carboxylate. Its molecular weight is 388.81, and its empirical formula is C 17H 17C lN 6O 3. Eszopiclone, USP has a single chiral center with an (S)-configuration. It has the following chemical structure:. Eszopiclone, USP is a white to light-yellow crystalline solid. Eszopiclone is very slightly soluble in water, slightly soluble in ethanol, and soluble in phosphate buffer (pH 3.2). Eszopiclone, USP is formulated as film-coated tablets for oral administration. Eszopiclone tablets, USP contain 1 mg, 2 mg, or 3 mg eszopiclone, USP and the following inactive ingredients: dibasic calcium phosphate dihydrate, colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide, and triacetin. In addition, both the 1 mg and 3 mg tablets contain FD&amp;C Blue #2.</Description>
  </NDC>
</NDCList>