{
"NDC": [
{
"NDCCode": "76420-579-10",
"PackageDescription": "10 mL in 1 VIAL, SINGLE-DOSE (76420-579-10) ",
"NDC11Code": "76420-0579-10",
"ProductNDC": "76420-579",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupivacaine Hydrochloride",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20051122",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA070584",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2023-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230809",
"SamplePackage": "N",
"IndicationAndUsage": "Bupivacaine Hydrochloride Injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Bupivacaine Hydrochloride Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "Bupivacaine Hydrochloride Injection contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for Bupivacaine Hydrochloride Injection is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. [see Warnings and Precautions (5.4)] . Bupivacaine hydrochloride is 2-piperidinecarboxamide, 1-butyl- N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula:. Bupivacaine Hydrochloride Injection, USP is a clear and colorless sterile isotonic solution. Each mL of single-dose vial contains 5 mg mg of bupivacaine hydrochloride (equivalent to 4.44 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection."
},
{
"NDCCode": "10135-579-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (10135-579-10) ",
"NDC11Code": "10135-0579-10",
"ProductNDC": "10135-579",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Terbutaline Sulfate",
"NonProprietaryName": "Terbutaline Sulfate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20141001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077152",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "TERBUTALINE SULFATE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20141001",
"SamplePackage": "N",
"IndicationAndUsage": "Terbutaline sulfate is indicated for the prevention and reversal of bronchospasm in patients 12 years of age and older with asthma and reversible bronchospasm associated with bronchitis and emphysema.",
"Description": "Terbutaline sulfate USP is a beta-adrenergic agonist bronchodilator available as tablets of 2.5 mg (2.05 mg of the free base) and 5 mg (4.1 mg of the free base) for oral administration. Terbutaline sulfate is ±-α-[(tert –butylamino) methyl]-3,5-dihydroxybenzyl alcohol sulfate (2:1) (salt). The molecular formula is (C12H19NO3)2 H2SO4 and the structural formula is. Terbutaline sulfate USP is a white to gray-white crystalline powder. It is odorless or has a faint odor of acetic acid. It is soluble in water and in 0.1N hydrochloric acid, slightly soluble in methanol, and insoluble in chloroform. Its molecular weight is 548.65. Inactive Ingredients: anhydrous lactose, pregelatinized corn starch, microcrystalline cellulose, povidone, and magnesium stearate."
},
{
"NDCCode": "50458-579-10",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (50458-579-10) / 10 TABLET, FILM COATED in 1 BLISTER PACK (50458-579-01) ",
"NDC11Code": "50458-0579-10",
"ProductNDC": "50458-579",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Xarelto",
"NonProprietaryName": "Rivaroxaban",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20111105",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022406",
"LabelerName": "Janssen Pharmaceuticals, Inc.",
"SubstanceName": "RIVAROXABAN",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20111105",
"SamplePackage": "N",
"IndicationAndUsage": "XARELTO is a factor Xa inhibitor indicated: 1 to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation (1.1), 2 for treatment of deep vein thrombosis (DVT) (1.2), 3 for treatment of pulmonary embolism (PE) (1.3), 4 for reduction in the risk of recurrence of DVT or PE (1.4), 5 for the prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery (1.5), 6 for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients (1.6), 7 to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) (1.7), 8 to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD (1.8), 9 for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years (1.9), 10 for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure (1.10).",
"Description": "Rivaroxaban, a factor Xa (FXa) inhibitor, is the active ingredient in XARELTO® Tablets and XARELTO® for oral suspension with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban is C19H18ClN3O5S and the molecular weight is 435.89. The structural formula is. Rivaroxaban is a pure (S)-enantiomer. It is an odorless, non-hygroscopic, white to yellowish powder. Rivaroxaban is only slightly soluble in organic solvents (e.g., acetone, polyethylene glycol 400) and is practically insoluble in water and aqueous media. Each XARELTO tablet contains 2.5 mg, 10 mg, 15 mg, or 20 mg of rivaroxaban. The inactive ingredients of XARELTO are: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for XARELTO 2.5 mg is Opadry® Light Yellow, containing ferric oxide yellow, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 10 mg tablets is Opadry® Pink and for XARELTO 15 mg tablets is Opadry® Red, both containing ferric oxide red, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 20 mg tablets is Opadry® II Dark Red, containing ferric oxide red, polyethylene glycol 3350, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. XARELTO for oral suspension is supplied as granules in bottles containing 155 mg of rivaroxaban (1 mg of rivaroxaban per mL after reconstitution). The inactive ingredients are: anhydrous citric acid, hypromellose, mannitol, microcrystalline cellulose and carboxymethylcellulose sodium, sodium benzoate, sucralose, sweet and creamy flavor and xanthan gum."
},
{
"NDCCode": "58411-579-10",
"PackageDescription": "1 BOTTLE in 1 CARTON (58411-579-10) / 30 mL in 1 BOTTLE",
"NDC11Code": "58411-0579-10",
"ProductNDC": "58411-579",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Shiseido Synchro Skin Radiant Lifting Foundation",
"ProprietaryNameSuffix": "350",
"NonProprietaryName": "Octinoxate And Titanium Dioxide",
"DosageFormName": "EMULSION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200920",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "SHISEIDO AMERICAS CORPORATION",
"SubstanceName": "OCTINOXATE; TITANIUM DIOXIDE",
"StrengthNumber": "2.484; .36",
"StrengthUnit": "g/30mL; g/30mL",
"Status": "Active",
"LastUpdate": "2026-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200920",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun ."
},
{
"NDCCode": "63304-579-03",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE (63304-579-03)",
"NDC11Code": "63304-0579-03",
"ProductNDC": "63304-579",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoprolol Tartrate",
"NonProprietaryName": "Metoprolol Tartrate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090324",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078459",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "METOPROLOL TARTRATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Hypertension. Metoprolol tartrate tablets are indicated for the treatment of hypertension. They may be used alone or in combination with other antihypertensive agents. Angina Pectoris. Metoprolol tartrate is indicated in the long-term treatment of angina pectoris. Myocardial Infarction. Metoprolol tartrate tablets are indicated in the treatment of hemodynamically stable patients with definite or suspected acute myocardial infarction to reduce cardiovascular mortality when used alone or in conjunction with intravenous metoprolol tartrate. Oral metoprolol tartrate therapy can be initiated after intravenous metoprolol tartrate therapy or, alternatively, oral treatment can begin within 3 to 10 days of the acute event (see DOSAGE AND ADMINISTRATION, CONTRAINDICATIONS, and WARNINGS).",
"Description": "Metoprolol tartrate, USP is a selective beta1-adrenoreceptor blocking agent, available as 25, 50 and 100 mg tablets for oral administration. Metoprolol tartrate is (±)-1-(isopropylamino)-3-[p-(2-methoxyethyl)phenoxy]-2-propanol (2:1) dextro-tartrate salt, and its structural formula is. Metoprolol tartrate, USP is a white, practically odorless, crystalline powder with a molecular weight of 684.81. It is very soluble in water; freely soluble in methylene chloride, in chloroform, and in alcohol; slightly soluble in acetone; and insoluble in ether. Each tablet for oral administration contains 25 mg, 50 mg or 100 mg of metoprolol tartrate USP and the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose anhydrous, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, polyethylene glycol, pregelatinized starch, titanium dioxide. In addition the 25 mg and 100 mg tablet contain propylene glycol and sodium lauryl sulfate; the 50 mg tablet contains D&C Red #30 and talc."
},
{
"NDCCode": "63304-579-10",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (63304-579-10)",
"NDC11Code": "63304-0579-10",
"ProductNDC": "63304-579",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoprolol Tartrate",
"NonProprietaryName": "Metoprolol Tartrate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090324",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078459",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "METOPROLOL TARTRATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Hypertension. Metoprolol tartrate tablets are indicated for the treatment of hypertension. They may be used alone or in combination with other antihypertensive agents. Angina Pectoris. Metoprolol tartrate is indicated in the long-term treatment of angina pectoris. Myocardial Infarction. Metoprolol tartrate tablets are indicated in the treatment of hemodynamically stable patients with definite or suspected acute myocardial infarction to reduce cardiovascular mortality when used alone or in conjunction with intravenous metoprolol tartrate. Oral metoprolol tartrate therapy can be initiated after intravenous metoprolol tartrate therapy or, alternatively, oral treatment can begin within 3 to 10 days of the acute event (see DOSAGE AND ADMINISTRATION, CONTRAINDICATIONS, and WARNINGS).",
"Description": "Metoprolol tartrate, USP is a selective beta1-adrenoreceptor blocking agent, available as 25, 50 and 100 mg tablets for oral administration. Metoprolol tartrate is (±)-1-(isopropylamino)-3-[p-(2-methoxyethyl)phenoxy]-2-propanol (2:1) dextro-tartrate salt, and its structural formula is. Metoprolol tartrate, USP is a white, practically odorless, crystalline powder with a molecular weight of 684.81. It is very soluble in water; freely soluble in methylene chloride, in chloroform, and in alcohol; slightly soluble in acetone; and insoluble in ether. Each tablet for oral administration contains 25 mg, 50 mg or 100 mg of metoprolol tartrate USP and the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose anhydrous, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, polyethylene glycol, pregelatinized starch, titanium dioxide. In addition the 25 mg and 100 mg tablet contain propylene glycol and sodium lauryl sulfate; the 50 mg tablet contains D&C Red #30 and talc."
},
{
"NDCCode": "63323-579-05",
"PackageDescription": "10 VIAL in 1 PACKAGE (63323-579-05) / 5 mL in 1 VIAL (63323-579-01) ",
"NDC11Code": "63323-0579-05",
"ProductNDC": "63323-579",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sincalide",
"NonProprietaryName": "Sincalide",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230401",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017697",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "SINCALIDE",
"StrengthNumber": "5",
"StrengthUnit": "ug/5mL",
"Pharm_Classes": "Cholecystokinin Analog [EPC], Cholecystokinin [CS]",
"Status": "Active",
"LastUpdate": "2024-02-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230401",
"SamplePackage": "N",
"IndicationAndUsage": "Sincalide for Injection is indicated in adults to: : 1 to stimulate gallbladder contraction, as may be assessed by various methods of diagnostic imaging, or to obtain by duodenal aspiration a sample of concentrated bile for analysis of cholesterol, bile salts, phospholipids, and crystals; , 2 to stimulate pancreatic secretion in combination with secretin prior to obtaining a duodenal aspirate for analysis of enzyme activity, composition, and cytology; , 3 to accelerate the transit of a barium meal through the small bowel, thereby decreasing the time and extent of radiation associated with fluoroscopy and x-ray examination of the intestinal tract. .",
"Description": "Sincalide for Injection is a cholecystopancreatic-gastrointestinal hormone for parenteral administration. The agent is a synthetically-prepared C-terminal octapeptide of cholecystokinin. Each single-dose vial of sincalide provides a sterile nonpyrogenic lyophilized white powder consisting of 5 mcg sincalide with 30 mg arginine hydrochloride, 15 mg lysine hydrochloride, 170 mg mannitol, 4 mg methionine, 2 mg pentetic acid, 0.005 mcg polysorbate 20, 9 mg potassium phosphate dibasic, and 0.04 mg sodium metabisulfite. The pH is adjusted to 6.0 to 8.0 with hydrochloric acid and/or sodium hydroxide prior to lyophilization. Sincalide is designated chemically as L-α-aspartyl-O-sulfo-L-tyrosyl-L-methionylglycyl-L-tryptophyl-L-methionyl- L-α-aspartyl-L-phenylalaninamide. Graphic formula:."
},
{
"NDCCode": "63739-579-10",
"PackageDescription": "10 BLISTER PACK in 1 BOX, UNIT-DOSE (63739-579-10) > 10 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "63739-0579-10",
"ProductNDC": "63739-579",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rivastigmine Tartrate",
"NonProprietaryName": "Rivastigmine Tartrate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20100701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077129",
"LabelerName": "McKesson Corporation dba SKY Packaging",
"SubstanceName": "RIVASTIGMINE TARTRATE",
"StrengthNumber": "6",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2021-03-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20100701",
"SamplePackage": "N"
},
{
"NDCCode": "65219-579-01",
"PackageDescription": "10 VIAL in 1 CARTON (65219-579-01) / 1 mL in 1 VIAL (65219-579-00) ",
"NDC11Code": "65219-0579-01",
"ProductNDC": "65219-579",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carboprost Tromethamine",
"NonProprietaryName": "Carboprost Tromethamine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20230612",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216882",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "CARBOPROST TROMETHAMINE",
"StrengthNumber": "250",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Prostaglandin Analog [EPC], Prostaglandins [CS]",
"Status": "Active",
"LastUpdate": "2023-06-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230612",
"SamplePackage": "N",
"IndicationAndUsage": "Carboprost tromethamine injection, USP is indicated for aborting pregnancy between the 13th and 20th weeks of gestation as calculated from the first day of the last normal menstrual period and in the following conditions related to second trimester abortion. 1. Failure of expulsion of the fetus during the course of treatment by another method; 2. Premature rupture of membranes in intrauterine methods with loss of drug and insufficient or absent uterine activity; 3. Requirement of a repeat intrauterine instillation of drug for expulsion of the fetus; 4. Inadvertent or spontaneous rupture of membranes in the presence of a previable fetus and absence of adequate activity for expulsion. Carboprost tromethamine injection is indicated for the treatment of postpartum hemorrhage due to uterine atony which has not responded to conventional methods of management. Prior treatment should include the use of intravenously administered oxytocin, manipulative techniques such as uterine massage and, unless contraindicated, intramuscular ergot preparations. Studies have shown that in such cases, the use of carboprost tromethamine injection has resulted in satisfactory control of hemorrhage, although it is unclear whether or not ongoing or delayed effects of previously administered ecbolic agents have contributed to the outcome. In a high proportion of cases, carboprost tromethamine injection used in this manner has resulted in the cessation of life threatening bleeding and the avoidance of emergency surgical intervention.",
"Description": "Carboprost tromethamine injection, USP an oxytocic, contains the tromethamine salt of the (15S)-15 methyl analogue of naturally occurring prostaglandin F2α in a solution suitable for intramuscular injection. Carboprost tromethamine is the established name for the active ingredient in carboprost tromethamine injection, USP. Four other chemical names are. 1. (15S)-15-methyl prostaglandin F2α tromethamine salt 2. 7-(3α,5α-dihydroxy-2ß-[(3S)-3-hydroxy-3-methyl-trans-1-octenyl]-1α-cyclopentyl]-cis-5-heptenoic acid compound with 2-amino-2-(hydroxymethyl) 1,3-propanediol 3. (15S)-9α,11α,15-trihydroxy-15-methylprosta-cis-5, trans-13-dienoic acid tromethamine salt 4. (15S)-15-methyl PGF2α-THAM. The structural formula is represented below. The molecular formula is C25H47O8N. The molecular weight of carboprost tromethamine, USP is 489.64. It is a white to slightly off-white crystalline powder. It generally melts between 95° and 105° C, depending on the rate of heating. Carboprost tromethamine, USP dissolves readily in water at room temperature at a concentration greater than 75 mg/mL. Each mL of carboprost tromethamine injection, USP contains carboprost tromethamine, USP equivalent to 250 mcg of carboprost, 83 mcg tromethamine, 9 mg sodium chloride, and 9.45 mg benzyl alcohol added as preservative. When necessary, pH is adjusted with sodium hydroxide and/or hydrochloric acid. The solution is sterile."
},
{
"NDCCode": "67457-579-01",
"PackageDescription": "1 KIT in 1 CARTON (67457-579-01) * 10 mL in 1 VIAL, GLASS (67457-577-50) * 10 mL in 1 VIAL, GLASS (67457-578-10) ",
"NDC11Code": "67457-0579-01",
"ProductNDC": "67457-579",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Melphalan Hydrochloride",
"NonProprietaryName": "Melphalan Hydrochloride",
"DosageFormName": "KIT",
"StartMarketingDate": "20140929",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090270",
"LabelerName": "Mylan Institutional LLC",
"Status": "Deprecated",
"LastUpdate": "2023-05-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20140929",
"SamplePackage": "N"
},
{
"NDCCode": "69423-579-10",
"PackageDescription": "107 g in 1 CYLINDER (69423-579-10) ",
"NDC11Code": "69423-0579-10",
"ProductNDC": "69423-579",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Gillette Clear Plus Dri-tech Power Rush",
"NonProprietaryName": "Aluminum Zirconium Octachlorohydrex Gly",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20210901",
"EndMarketingDate": "20250201",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M019",
"LabelerName": "The Procter & Gamble Manufacturing Company",
"SubstanceName": "ALUMINUM ZIRCONIUM OCTACHLOROHYDREX GLY",
"StrengthNumber": "17",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2025-02-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20210901",
"EndMarketingDatePackage": "20250201",
"SamplePackage": "N",
"IndicationAndUsage": "reduces underarm wetness."
},
{
"NDCCode": "71919-579-10",
"PackageDescription": "100 mL in 1 BOTTLE, GLASS (71919-579-10) ",
"NDC11Code": "71919-0579-10",
"ProductNDC": "71919-579",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Rheum Officinale",
"NonProprietaryName": "Rheum Officinale Root",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20090401",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "RHEUM OFFICINALE ROOT",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/mL",
"Status": "Deprecated",
"LastUpdate": "2022-03-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20090401",
"SamplePackage": "N"
},
{
"NDCCode": "76420-008-10",
"PackageDescription": "10 mL in 1 VIAL, SINGLE-DOSE (76420-008-10) ",
"NDC11Code": "76420-0008-10",
"ProductNDC": "76420-008",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupivacaine Hydrochloride",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INTRACAUDAL",
"StartMarketingDate": "20131105",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203895",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2022-10-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200116",
"SamplePackage": "N",
"IndicationAndUsage": "Bupivacaine hydrochloride injection, USP is indicated for the production of local or regional anesthesia or analgesia for surgery, oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Only the 0.25% and 0.5% concentrations are indicated for obstetrical anesthesia. (See WARNINGS.) Experience with nonobstetrical surgical procedures in pregnant patients is not sufficient to recommend use of 0.75% concentration of bupivacaine hydrochloride injection, USP in these patients. Bupivacaine hydrochloride injection, USP is not recommended for intravenous regional anesthesia (Bier Block). See WARNINGS. The routes of administration and indicated bupivacaine hydrochloride injection, USP concentrations are:. (See DOSAGE AND ADMINISTRATION for additional information.) Standard textbooks should be consulted to determine the accepted procedures and techniques for the administration of bupivacaine hydrochloride injection, USP.",
"Description": "Bupivacaine hydrochloride USP is 2-Piperidinecarboxamide, 1-butyl- N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate, a white, odorless, crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula:. Bupivacaine hydrochloride injection, USP is available in sterile isotonic solution for injection via local infiltration, peripheral nerve block, and caudal and lumbar epidural blocks. Solution of bupivacaine hydrochloride injection, USP may be autoclaved. Solution is clear and colorless. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage. Bupivacaine hydrochloride injection, USP — Sterile isotonic solution containing sodium chloride. The pH of the solution is adjusted to between 4 and 6.5 with sodium hydroxide or hydrochloric acid."
},
{
"NDCCode": "76420-016-01",
"PackageDescription": "1 VIAL in 1 CARTON (76420-016-01) / 10 mL in 1 VIAL",
"NDC11Code": "76420-0016-01",
"ProductNDC": "76420-016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Triamcinolone Acetonide",
"NonProprietaryName": "Triamcinolone Acetonide",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "INTRA-ARTICULAR; INTRAMUSCULAR",
"StartMarketingDate": "20191119",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207550",
"LabelerName": "ASCLEMED USA INC.",
"SubstanceName": "TRIAMCINOLONE ACETONIDE",
"StrengthNumber": "400",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250620",
"SamplePackage": "N",
"IndicationAndUsage": "Intramuscular. Where oral therapy is not feasible, injectable corticosteroid therapy, including triamcinolone acetonide injectable suspension is indicated for intramuscular useas follows:. Allergic states:Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, perennial or seasonal allergic rhinitis, serum sickness, transfusion reactions. Dermatologic diseases:Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders:Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases:To tide the patient over a critical period of the disease in regional enteritis and ulcerative colitis. Hematologic disorders:Acquired (autoimmune) hemolytic anemia, Diamond-Blackfan anemia, pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous:Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used with appropriate antituberculous chemotherapy. Neoplastic diseases:For the palliative management of leukemias and lymphomas. Nervous system:Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor or craniotomy. Ophthalmic diseases:Sympathetic ophthalmia, temporal arteritis, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases:To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases:Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders:As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, polymyositis and systemic lupus erythematosus. Intra-Articular. The intra-articular or soft tissue administrationof triamcinolone acetonide injectable suspension is indicated as adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis, acute and subacute bursitis, acute nonspecific tenosynovitis, epicondylitis, rheumatoid arthritis, synovitis of osteoarthritis.",
"Description": "Triamcinolone acetonide injectable suspension, USP is a synthetic glucocorticoid corticosteroid with anti-inflammatory action. THIS FORMULATION IS SUITABLE FOR INTRAMUSCULAR AND INTRA-ARTICULAR USE ONLY. THIS FORMULATION IS NOT FOR INTRADERMAL INJECTION. Each mL of the sterile aqueous suspension provides 40 mg triamcinolone acetonide, USP, with 0.65% sodium chloride for isotonicity, 0.99% (w/v) benzyl alcohol as a preservative, 0.75% carboxymethylcellulose sodium, and 0.04% polysorbate 80 in an aqueous suspension. Sodium hydroxide or hydrochloric acid may be present to adjust pH to 5.0 to 7.5. At the time of manufacture, the air in the container is replaced by nitrogen. The chemical name for triamcinolone acetonide is 9-Fluoro-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with acetone. Its structural formula is. Triamcinolone acetonide, USP occurs as a white to cream-colored, crystalline powder having not more than a slight odor and is practically insoluble in water and very soluble in alcohol."
},
{
"NDCCode": "76420-016-10",
"PackageDescription": "1 VIAL in 1 CARTON (76420-016-10) / 10 mL in 1 VIAL",
"NDC11Code": "76420-0016-10",
"ProductNDC": "76420-016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Triamcinolone Acetonide",
"NonProprietaryName": "Triamcinolone Acetonide",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "INTRA-ARTICULAR; INTRAMUSCULAR",
"StartMarketingDate": "20191119",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207550",
"LabelerName": "ASCLEMED USA INC.",
"SubstanceName": "TRIAMCINOLONE ACETONIDE",
"StrengthNumber": "400",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250620",
"SamplePackage": "N",
"IndicationAndUsage": "Intramuscular. Where oral therapy is not feasible, injectable corticosteroid therapy, including triamcinolone acetonide injectable suspension is indicated for intramuscular useas follows:. Allergic states:Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, perennial or seasonal allergic rhinitis, serum sickness, transfusion reactions. Dermatologic diseases:Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders:Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases:To tide the patient over a critical period of the disease in regional enteritis and ulcerative colitis. Hematologic disorders:Acquired (autoimmune) hemolytic anemia, Diamond-Blackfan anemia, pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous:Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used with appropriate antituberculous chemotherapy. Neoplastic diseases:For the palliative management of leukemias and lymphomas. Nervous system:Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor or craniotomy. Ophthalmic diseases:Sympathetic ophthalmia, temporal arteritis, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases:To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases:Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders:As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, polymyositis and systemic lupus erythematosus. Intra-Articular. The intra-articular or soft tissue administrationof triamcinolone acetonide injectable suspension is indicated as adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis, acute and subacute bursitis, acute nonspecific tenosynovitis, epicondylitis, rheumatoid arthritis, synovitis of osteoarthritis.",
"Description": "Triamcinolone acetonide injectable suspension, USP is a synthetic glucocorticoid corticosteroid with anti-inflammatory action. THIS FORMULATION IS SUITABLE FOR INTRAMUSCULAR AND INTRA-ARTICULAR USE ONLY. THIS FORMULATION IS NOT FOR INTRADERMAL INJECTION. Each mL of the sterile aqueous suspension provides 40 mg triamcinolone acetonide, USP, with 0.65% sodium chloride for isotonicity, 0.99% (w/v) benzyl alcohol as a preservative, 0.75% carboxymethylcellulose sodium, and 0.04% polysorbate 80 in an aqueous suspension. Sodium hydroxide or hydrochloric acid may be present to adjust pH to 5.0 to 7.5. At the time of manufacture, the air in the container is replaced by nitrogen. The chemical name for triamcinolone acetonide is 9-Fluoro-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with acetone. Its structural formula is. Triamcinolone acetonide, USP occurs as a white to cream-colored, crystalline powder having not more than a slight odor and is practically insoluble in water and very soluble in alcohol."
},
{
"NDCCode": "76420-018-10",
"PackageDescription": "10 mL in 1 VIAL, SINGLE-DOSE (76420-018-10) ",
"NDC11Code": "76420-0018-10",
"ProductNDC": "76420-018",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupivacaine Hydrochloride",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL",
"StartMarketingDate": "20131105",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203895",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2020-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200409",
"SamplePackage": "N",
"IndicationAndUsage": "Bupivacaine hydrochloride injection, USP is indicated for the production of local or regional anesthesia or analgesia for surgery, oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Only the 0.25% and 0.5% concentrations are indicated for obstetrical anesthesia. (See WARNINGS.) Experience with nonobstetrical surgical procedures in pregnant patients is not sufficient to recommend use of 0.75% concentration of bupivacaine hydrochloride injection, USP in these patients. Bupivacaine hydrochloride injection, USP is not recommended for intravenous regional anesthesia (Bier Block). See WARNINGS. The routes of administration and indicated bupivacaine hydrochloride injection, USP concentrations are:. (See DOSAGE AND ADMINISTRATION for additional information.) Standard textbooks should be consulted to determine the accepted procedures and techniques for the administration of bupivacaine hydrochloride injection, USP.",
"Description": "Bupivacaine hydrochloride USP is 2-Piperidinecarboxamide, 1-butyl- N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate, a white, odorless, crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula:. Bupivacaine hydrochloride injection, USP is available in sterile isotonic solution for injection via local infiltration, peripheral nerve block, and caudal and lumbar epidural blocks. Solution of bupivacaine hydrochloride injection, USP may be autoclaved. Solution is clear and colorless. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage. Bupivacaine hydrochloride injection, USP — Sterile isotonic solution containing sodium chloride. The pH of the solution is adjusted to between 4 and 6.5 with sodium hydroxide or hydrochloric acid."
},
{
"NDCCode": "76420-021-10",
"PackageDescription": "100 TABLET in 1 BOTTLE (76420-021-10) ",
"NDC11Code": "76420-0021-10",
"ProductNDC": "76420-021",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170410",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040275",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2022-10-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200929",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol tablets are indicated in the: 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause. , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. , 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. , 4 Treatment of breast cancer (for palliation only) in appropriately selected women and men with metastatic disease. , 5 Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only). , 6 Prevention of osteoporosis. When prescribing solely for the prevention of postmenopausal osteoporosis, therapy should only be considered for women at significant risk of osteoporosis and for whom non-estrogen medications are not considered to be appropriate (See CLINICAL PHARMACOLOGY, Clinical Studies). .",
"Description": "Estradiol tablets, USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white, crystalline solid, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is. In addition, each tablet for oral administration contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate."
},
{
"NDCCode": "76420-022-10",
"PackageDescription": "100 TABLET in 1 BOTTLE (76420-022-10) ",
"NDC11Code": "76420-0022-10",
"ProductNDC": "76420-022",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170410",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040275",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2022-10-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200929",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol tablets are indicated in the: 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause. , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. , 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. , 4 Treatment of breast cancer (for palliation only) in appropriately selected women and men with metastatic disease. , 5 Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only). , 6 Prevention of osteoporosis. When prescribing solely for the prevention of postmenopausal osteoporosis, therapy should only be considered for women at significant risk of osteoporosis and for whom non-estrogen medications are not considered to be appropriate (See CLINICAL PHARMACOLOGY, Clinical Studies). .",
"Description": "Estradiol tablets, USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white, crystalline solid, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is. In addition, each tablet for oral administration contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate."
},
{
"NDCCode": "76420-023-10",
"PackageDescription": "100 TABLET in 1 BOTTLE (76420-023-10) ",
"NDC11Code": "76420-0023-10",
"ProductNDC": "76420-023",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170410",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040275",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2022-10-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200929",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol tablets are indicated in the: 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause. , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. , 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. , 4 Treatment of breast cancer (for palliation only) in appropriately selected women and men with metastatic disease. , 5 Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only). , 6 Prevention of osteoporosis. When prescribing solely for the prevention of postmenopausal osteoporosis, therapy should only be considered for women at significant risk of osteoporosis and for whom non-estrogen medications are not considered to be appropriate (See CLINICAL PHARMACOLOGY, Clinical Studies). .",
"Description": "Estradiol tablets, USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white, crystalline solid, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is. In addition, each tablet for oral administration contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate."
},
{
"NDCCode": "76420-024-10",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE (76420-024-10) ",
"NDC11Code": "76420-0024-10",
"ProductNDC": "76420-024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eszopiclone",
"NonProprietaryName": "Eszopiclone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150131",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202929",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "ESZOPICLONE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200617",
"SamplePackage": "N",
"IndicationAndUsage": "Eszopiclone tablets are indicated for the treatment of insomnia. In controlled outpatient and sleep laboratory studies, eszopiclone tablets administered at bedtime decreased sleep latency and improved sleep maintenance. The clinical trials performed in support of efficacy were up to 6 months in duration. The final formal assessments of sleep latency and maintenance were performed at 4 weeks in the 6-week study (adults only), at the end of both 2-week studies (elderly only) and at the end of the 6-month study (adults only).",
"Description": "Eszopiclone, USP is a nonbenzodiazepine hypnotic agent that is a pyrrolopyrazine derivative of the cyclopyrrolone class. The chemical name of eszopiclone is (+)-(5S)-6-(5chloropyridin-2-yl)-7-oxo-6,7-dihydro-5H-pyrrolo[3,4-b] pyrazin-5-yl 4-methylpiperazine-1carboxylate. Its molecular weight is 388.81, and its empirical formula is C 17H 17C lN 6O 3. Eszopiclone, USP has a single chiral center with an (S)-configuration. It has the following chemical structure:. Eszopiclone, USP is a white to light-yellow crystalline solid. Eszopiclone is very slightly soluble in water, slightly soluble in ethanol, and soluble in phosphate buffer (pH 3.2). Eszopiclone, USP is formulated as film-coated tablets for oral administration. Eszopiclone tablets, USP contain 1 mg, 2 mg, or 3 mg eszopiclone, USP and the following inactive ingredients: dibasic calcium phosphate dihydrate, colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide, and triacetin. In addition, both the 1 mg and 3 mg tablets contain FD&C Blue #2."
},
{
"NDCCode": "76420-026-10",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE (76420-026-10) ",
"NDC11Code": "76420-0026-10",
"ProductNDC": "76420-026",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eszopiclone",
"NonProprietaryName": "Eszopiclone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150131",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202929",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "ESZOPICLONE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200617",
"SamplePackage": "N",
"IndicationAndUsage": "Eszopiclone tablets are indicated for the treatment of insomnia. In controlled outpatient and sleep laboratory studies, eszopiclone tablets administered at bedtime decreased sleep latency and improved sleep maintenance. The clinical trials performed in support of efficacy were up to 6 months in duration. The final formal assessments of sleep latency and maintenance were performed at 4 weeks in the 6-week study (adults only), at the end of both 2-week studies (elderly only) and at the end of the 6-month study (adults only).",
"Description": "Eszopiclone, USP is a nonbenzodiazepine hypnotic agent that is a pyrrolopyrazine derivative of the cyclopyrrolone class. The chemical name of eszopiclone is (+)-(5S)-6-(5chloropyridin-2-yl)-7-oxo-6,7-dihydro-5H-pyrrolo[3,4-b] pyrazin-5-yl 4-methylpiperazine-1carboxylate. Its molecular weight is 388.81, and its empirical formula is C 17H 17C lN 6O 3. Eszopiclone, USP has a single chiral center with an (S)-configuration. It has the following chemical structure:. Eszopiclone, USP is a white to light-yellow crystalline solid. Eszopiclone is very slightly soluble in water, slightly soluble in ethanol, and soluble in phosphate buffer (pH 3.2). Eszopiclone, USP is formulated as film-coated tablets for oral administration. Eszopiclone tablets, USP contain 1 mg, 2 mg, or 3 mg eszopiclone, USP and the following inactive ingredients: dibasic calcium phosphate dihydrate, colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide, and triacetin. In addition, both the 1 mg and 3 mg tablets contain FD&C Blue #2."
},
{
"NDCCode": "76420-027-10",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE (76420-027-10) ",
"NDC11Code": "76420-0027-10",
"ProductNDC": "76420-027",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eszopiclone",
"NonProprietaryName": "Eszopiclone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20140425",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202929",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "ESZOPICLONE",
"StrengthNumber": "3",
"StrengthUnit": "mg/1",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200617",
"SamplePackage": "N",
"IndicationAndUsage": "Eszopiclone tablets are indicated for the treatment of insomnia. In controlled outpatient and sleep laboratory studies, eszopiclone tablets administered at bedtime decreased sleep latency and improved sleep maintenance. The clinical trials performed in support of efficacy were up to 6 months in duration. The final formal assessments of sleep latency and maintenance were performed at 4 weeks in the 6-week study (adults only), at the end of both 2-week studies (elderly only) and at the end of the 6-month study (adults only).",
"Description": "Eszopiclone, USP is a nonbenzodiazepine hypnotic agent that is a pyrrolopyrazine derivative of the cyclopyrrolone class. The chemical name of eszopiclone is (+)-(5S)-6-(5chloropyridin-2-yl)-7-oxo-6,7-dihydro-5H-pyrrolo[3,4-b] pyrazin-5-yl 4-methylpiperazine-1carboxylate. Its molecular weight is 388.81, and its empirical formula is C 17H 17C lN 6O 3. Eszopiclone, USP has a single chiral center with an (S)-configuration. It has the following chemical structure:. Eszopiclone, USP is a white to light-yellow crystalline solid. Eszopiclone is very slightly soluble in water, slightly soluble in ethanol, and soluble in phosphate buffer (pH 3.2). Eszopiclone, USP is formulated as film-coated tablets for oral administration. Eszopiclone tablets, USP contain 1 mg, 2 mg, or 3 mg eszopiclone, USP and the following inactive ingredients: dibasic calcium phosphate dihydrate, colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide, and triacetin. In addition, both the 1 mg and 3 mg tablets contain FD&C Blue #2."
},
{
"NDCCode": "76420-032-10",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE (76420-032-10) ",
"NDC11Code": "76420-0032-10",
"ProductNDC": "76420-032",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketorolac Tromethamine",
"NonProprietaryName": "Ketorolac Tromethamine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19980617",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074754",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "KETOROLAC TROMETHAMINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2023-09-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220916",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of Ketorolac Tromethamine Tablets USP and other treatment options before deciding to use Ketorolac Tromethamine Tablets USP. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals.",
"Description": "Ketorolac Tromethamine Tablets USP are a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine, USP is (±)-5-benzoyl-2,3-dihydro-1 H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol (1:1). The structural formula is:. C 15H 13NO 3.C 4H 11NO 3M.W. 376.40. Ketorolac tromethamine, USP is a racemic mixture of [-]S and [+]R ketorolac tromethamine, USP. Ketorolac tromethamine, USP may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine, USP has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. Ketorolac Tromethamine Tablets USP are white, round, convex, unscored, film-coated tablets. Each tablet, for oral administration, contains 10 mg ketorolac tromethamine, USP, the active ingredient. In addition, each tablet contains the following inactive ingredients: hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, and titanium dioxide."
},
{
"NDCCode": "76420-039-10",
"PackageDescription": "10 TABLET in 1 BOTTLE (76420-039-10) ",
"NDC11Code": "76420-0039-10",
"ProductNDC": "76420-039",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Meloxicam",
"NonProprietaryName": "Meloxicam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070307",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077927",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "MELOXICAM",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200904",
"SamplePackage": "N",
"IndicationAndUsage": "Meloxicam tablets are a non-steroidal anti-inflammatory drug indicated for: 1 Osteoarthritis (OA) ( 1.1) , 2 Rheumatoid Arthritis (RA) ( 1.2) , 3 Juvenile Rheumatoid Arthritis (JRA) in patients who weigh ≥60 kg ( 1.3) .",
"Description": "Meloxicam Tablets USP are a nonsteroidal anti-inflammatory drug (NSAID). Each tablet contains 7.5 mg or 15 mg meloxicam for oral administration. Meloxicam is chemically designated as 4-hydroxy-2-methyl- N-(5-methyl-2-thiazolyl)-2 H-1,2-benzothiazine-3-carboxamide-1,1-dioxide. The molecular weight is 351.4. Its empirical formula is C 14H 13N 3O 4S 2and it has the following structural formula:. Chemical Structure. Meloxicam is a pastel yellow solid, practically insoluble in water, with higher solubility observed in strong acids and bases. It is very slightly soluble in methanol. Meloxicam has an apparent partition coefficient (log P)app = 0.1 in n-octanol/buffer pH 7.4. Meloxicam has pKa values of 1.1 and 4.2. Meloxicam is available as a tablet for oral administration containing 15 mg meloxicam. The inactive ingredients in Meloxicam tablets USP include colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone and sodium citrate dihydrate."
},
{
"NDCCode": "76420-042-10",
"PackageDescription": "100 TABLET in 1 BOTTLE, PLASTIC (76420-042-10) ",
"NDC11Code": "76420-0042-10",
"ProductNDC": "76420-042",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Naproxen",
"NonProprietaryName": "Naproxen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160706",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091416",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "NAPROXEN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2022-10-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200205",
"SamplePackage": "N",
"IndicationAndUsage": "CAREFULLY CONSIDER THE POTENTIAL BENEFITS AND RISKS OF NAPROXEN AND OTHER TREATMENT OPTIONS BEFORE DECIDING TO USE NAPROXEN TABLETS. USE THE LOWEST EFFECTIVE DOSE FOR THE SHORTEST DURATION CONSISTENT WITH INDIVIDUAL PATIENT TREATMENT GOALS (SEE WARNINGS: GASTROINTESTINAL BLEEDING, ULCERATION, AND PERFORATION). NAPROXEN TABLETS ARE INDICATED. FOR THE RELIEF OF THE SIGNS AND SYMPTOMS OF RHEUMATOID ARTHRITIS. FOR THE RELIEF OF THE SIGNS AND SYMPTOMS OF OSTEOARTHRITIS. FOR THE RELIEF OF THE SIGNS AND SYMPTOMS OF ANKYLOSING SPONDYLITIS. FOR THE RELIEF OF THE SIGNS AND SYMPTOMS OF JUVENILE ARTHRITIS. NAPROXEN TABLETS ARE ALSO INDICATED. FOR RELIEF OF THE SIGNS AND SYMPTOMS OF TENDONITIS. FOR RELIEF OF THE SIGNS AND SYMPTOMS OF BURSITIS. FOR RELIEF OF THE SIGNS AND SYMPTOMS OF ACUTE GOUT. FOR THE MANAGEMENT OF PAIN. FOR THE MANAGEMENT OF PRIMARY DYSMENORRHEA."
},
{
"NDCCode": "76420-044-10",
"PackageDescription": "10 CAPSULE in 1 BOTTLE (76420-044-10) ",
"NDC11Code": "76420-0044-10",
"ProductNDC": "76420-044",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline Hyclate",
"NonProprietaryName": "Doxycycline Hyclate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19840911",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062500",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "DOXYCYCLINE HYCLATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2025-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200904",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline and other antibacterial drugs, doxycycline should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Doxycycline is an antibacterial drug synthetically derived from oxytetracycline, and is available as Doxycycline Hyclate Capsules; for oral administration. The structural formula of doxycycline monohydrate is. with a molecular formula of C 22H 24N 2O 8∙H 2O and a molecular weight of 462.46. The chemical designation for doxycycline is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrate. The molecular formula for doxycycline hydrochloride hemiethanolate hemihydrate is (C 22H 24N 2O 8∙HCl) 2∙C 2H 6O∙H 2O and the molecular weight is 1025.89. Doxycycline is a light-yellow crystalline powder. Doxycycline hyclate is soluble in water, while doxycycline monohydrate is very slightly soluble in water. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inactive ingredients in the capsule formulations are: colloidal silicon dioxide, lactose anhydrous, magnesium stearate, methylcellulose, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, and stearic acid. 100 mg gelatin capsule shell contains: FD&C Blue #1, titanium dioxide and gelatin. Black ink contains shellac glaze in SD-45, black iron oxide, propylene glycol, FD&C Blue #2, FD&C Red # 40, FD&C Blue # 1, D&C Yellow # 10, butyl alcohol, denatured alcohol. Each capsule, for oral administration, contains doxycycline hyclate equivalent to 100 mg of doxycycline."
},
{
"NDCCode": "76420-045-10",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE (76420-045-10) ",
"NDC11Code": "76420-0045-10",
"ProductNDC": "76420-045",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ciprofloxacin",
"NonProprietaryName": "Ciprofloxacin Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070426",
"EndMarketingDate": "20261031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077859",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "CIPROFLOXACIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 1A2 Inhibitors [MoA], Fluoroquinolone Antibacterial [EPC], Fluoroquinolones [CS]",
"Status": "Active",
"LastUpdate": "2026-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200904",
"EndMarketingDatePackage": "20261031",
"SamplePackage": "N",
"IndicationAndUsage": "Ciprofloxacin tablet is a fluoroquinolone antibacterial indicated in adults (18 years of age and older) with the following infections caused by designated, susceptible bacteria and in pediatric patients where indicated: : 1 Skin and Skin Structure Infections ( 1.1) , 2 Bone and Joint Infections ( 1.2) , 3 Complicated Intra-Abdominal Infections ( 1.3) , 4 Infectious Diarrhea ( 1.4) , 5 Typhoid Fever (Enteric Fever) ( 1.5) , 6 Uncomplicated Cervical and Urethral Gonorrhea ( 1.6) , 7 Inhalational Anthrax post-exposure in adult and pediatric patients ( 1.7) , 8 Plague in adult and pediatric patients ( 1.8) , 9 Chronic Bacterial Prostatitis ( 1.9) , 10 Lower Respiratory Tract Infections ( 1.10) Acute Exacerbation of Chronic Bronchitis, 11 Urinary Tract Infections ( 1.11) Urinary Tract Infections (UTI)Acute Uncomplicated CystitisComplicated UTI and Pyelonephritis in Pediatric Patients, 12 Acute Sinusitis ( 1.12) .",
"Description": "Ciprofloxacin tablets, USP are synthetic antimicrobial agents for oral administration. Ciprofloxacin hydrochloride, USP, a fluoroquinolone, is the monohydrochloride monohydrate salt of 1-cyclopropyl-6-fluoro-1, 4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. It is a faintly yellowish to light yellow crystalline substance with a molecular weight of 385.8. Its molecular formula is C 17H 18FN 3O 3HClH 2O and its chemical structure is as follows:. Ciprofloxacin is 1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. Its molecular formula is C 17H 18FN 3O 3and its molecular weight is 331.4. It is a faintly yellowish to light yellow crystalline substance and its chemical structure is as follows:. Ciprofloxacin film-coated tablets are available in 500 mg (ciprofloxacin equivalent) strengths. Each ciprofloxacin film-coated tablet contains 500 mg (equivalent to 582 mg ciprofloxacin hydrochloride monohydrate). Ciprofloxacin tablets, USP are white to off-white. The inactive ingredients are colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, sodium starch glycolate, and titanium dioxide."
},
{
"NDCCode": "76420-055-10",
"PackageDescription": "100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (76420-055-10) ",
"NDC11Code": "76420-0055-10",
"ProductNDC": "76420-055",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omeprazole",
"NonProprietaryName": "Omeprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20141031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091672",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "OMEPRAZOLE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-02-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200116",
"SamplePackage": "N",
"IndicationAndUsage": "Omeprazole delayed-release capsules are a proton pump inhibitor (PPI) indicated for the:. Treatment of active duodenal ulcer in adults ( 1.1) . Eradication of Helicobacter pylorito reduce the risk of duodenal ulcer recurrence in adults ( 1.2) . Treatment of active benign gastric ulcer in adults ( 1.3) . Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 2 years of age and older ( 1.4) . Maintenance of healing of EE due to acid-mediated GERD in patients 2 years of age and older ( 1.6) . Pathologic hypersecretory conditions in adults ( 1.7) .",
"Description": "The active ingredient in Omeprazole Delayed-Release Capsules, USP is a substituted benzimidazole, 5-methoxy-2[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C 17H 19N 3O 3S, with a molecular weight of 345.42 g/mol. The structural formula is:. Omeprazole, USP is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole, USP is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg or 40 mg of omeprazole, USP in the form of enteric-coated granules with the following inactive ingredients: anhydrous lactose, cetyl alcohol, di-sodium hydrogen phosphate dihydrate, hypromellose, hypromellose phthalate, mannitol, simethicone emulsion 30%, sodium lauryl sulfate and sugar sphere. The capsule shell for Omeprazole Delayed-Release Capsules, USP 10 mg contains D&C Yellow No.10, FD&C Blue No.1, FD&C Red No. 40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for Omeprazole Delayed-Release Capsules, USP 20 mg contains FD&C Blue No.1, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for Omeprazole Delayed-Release Capsules, USP 40 mg contains D&C Yellow No.10, FD&C Blue No.1, FD&C Red No. 40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The imprinting ink has the following components: black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, strong ammonia solution and shellac."
},
{
"NDCCode": "76420-056-10",
"PackageDescription": "10 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK (76420-056-10) ",
"NDC11Code": "76420-0056-10",
"ProductNDC": "76420-056",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ondansetron",
"NonProprietaryName": "Ondansetron",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20100412",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090469",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "ONDANSETRON",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-10-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200205",
"SamplePackage": "N",
"IndicationAndUsage": "Ondansetron orally disintegrating tablets are indicated for the prevention of nausea and vomiting associated with: 1 highly emetogenic cancer chemotherapy, including cisplatin greater than or equal to 50 mg/m 2, 2 initial and repeat courses of moderately emetogenic cancer chemotherapy, 3 radiotherapy in patients receiving either total body irradiation, single high-dose fraction to the abdomen, or daily fractions to the abdomen .",
"Description": "The active ingredient in ondansetron orally disintegrating tablets, USP is ondansetron base, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT 3receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one. It has the following structural formula: The molecular formula is C 18H 19N 3O representing a molecular weight of 293.4. Ondansetron is a white to off-white powder. Each 4 mg ondansetron orally disintegrating tablet, USP for oral administration contains 4 mg ondansetron base. Each ondansetron orally disintegrating tablet, USP also contains the inactive ingredients mannitol, crospovidone, lactose monohydrate, microcrystalline cellulose, aspartame, strawberry guarana flavor, colloidal silicon dioxide, and magnesium stearate. The strawberry guarana flavor contains maltodextrin, propylene glycol, artificial flavors, and acetic acid. Ondansetron orally disintegrating tablets, USP are orally administered formulation of ondansetron which disintegrates on the tongue and does not require water to aid dissolution or swallowing. Meets USP Disintegration Test 2."
},
{
"NDCCode": "76420-058-10",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (76420-058-10) ",
"NDC11Code": "76420-0058-10",
"ProductNDC": "76420-058",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Progesterone",
"NonProprietaryName": "Progesterone",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20170911",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207724",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "PROGESTERONE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Progesterone [CS], Progesterone [EPC]",
"Status": "Active",
"LastUpdate": "2022-10-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191216",
"SamplePackage": "N",
"IndicationAndUsage": "Progesterone capsules are indicated for use in the prevention of endometrial hyperplasia in nonhysterectomized postmenopausal women who are receiving conjugated estrogens tablets. They are also indicated for use in secondary amenorrhea.",
"Description": "Progesterone capsules contain progesterone, USP for oral administration. Progesterone, USP has a molecular weight of 314.47 and a molecular formula of C 21H 30O 2. Progesterone, USP (pregn-4-ene-3, 20-dione) is a white or creamy white, odorless, crystalline powder practically insoluble in water, soluble in alcohol, acetone and dioxane and sparingly soluble in vegetable oils, stable in air, melting between 126° and 131°C. The structural formula is:. Progesterone, USP is synthesized from a starting material from a plant source and is chemically identical to progesterone of human ovarian origin. Progesterone capsules are available in multiple strengths to afford dosage flexibility for optimum management. Progesterone capsules contain either 100 mg or 200 mg progesterone, USP. The inactive ingredients for progesterone capsules 100 mg and 200 mg include: arachis oil, D&C Yellow No. 10 aluminum lake, FD&C Yellow No. 6 aluminum lake, gelatin, glycerin, purified water, soy lecithin and titanium dioxide."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>76420-579-10</NDCCode>
<PackageDescription>10 mL in 1 VIAL, SINGLE-DOSE (76420-579-10) </PackageDescription>
<NDC11Code>76420-0579-10</NDC11Code>
<ProductNDC>76420-579</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20051122</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA070584</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230809</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupivacaine Hydrochloride Injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Bupivacaine Hydrochloride Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Bupivacaine Hydrochloride Injection contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for Bupivacaine Hydrochloride Injection is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. [see Warnings and Precautions (5.4)] . Bupivacaine hydrochloride is 2-piperidinecarboxamide, 1-butyl- N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula:. Bupivacaine Hydrochloride Injection, USP is a clear and colorless sterile isotonic solution. Each mL of single-dose vial contains 5 mg mg of bupivacaine hydrochloride (equivalent to 4.44 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection.</Description>
</NDC>
<NDC>
<NDCCode>10135-579-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (10135-579-10) </PackageDescription>
<NDC11Code>10135-0579-10</NDC11Code>
<ProductNDC>10135-579</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Terbutaline Sulfate</ProprietaryName>
<NonProprietaryName>Terbutaline Sulfate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077152</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>TERBUTALINE SULFATE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Terbutaline sulfate is indicated for the prevention and reversal of bronchospasm in patients 12 years of age and older with asthma and reversible bronchospasm associated with bronchitis and emphysema.</IndicationAndUsage>
<Description>Terbutaline sulfate USP is a beta-adrenergic agonist bronchodilator available as tablets of 2.5 mg (2.05 mg of the free base) and 5 mg (4.1 mg of the free base) for oral administration. Terbutaline sulfate is ±-α-[(tert –butylamino) methyl]-3,5-dihydroxybenzyl alcohol sulfate (2:1) (salt). The molecular formula is (C12H19NO3)2 H2SO4 and the structural formula is. Terbutaline sulfate USP is a white to gray-white crystalline powder. It is odorless or has a faint odor of acetic acid. It is soluble in water and in 0.1N hydrochloric acid, slightly soluble in methanol, and insoluble in chloroform. Its molecular weight is 548.65. Inactive Ingredients: anhydrous lactose, pregelatinized corn starch, microcrystalline cellulose, povidone, and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>50458-579-10</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (50458-579-10) / 10 TABLET, FILM COATED in 1 BLISTER PACK (50458-579-01) </PackageDescription>
<NDC11Code>50458-0579-10</NDC11Code>
<ProductNDC>50458-579</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Xarelto</ProprietaryName>
<NonProprietaryName>Rivaroxaban</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20111105</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022406</ApplicationNumber>
<LabelerName>Janssen Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>RIVAROXABAN</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20111105</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>XARELTO is a factor Xa inhibitor indicated: 1 to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation (1.1), 2 for treatment of deep vein thrombosis (DVT) (1.2), 3 for treatment of pulmonary embolism (PE) (1.3), 4 for reduction in the risk of recurrence of DVT or PE (1.4), 5 for the prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery (1.5), 6 for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients (1.6), 7 to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) (1.7), 8 to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD (1.8), 9 for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years (1.9), 10 for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure (1.10).</IndicationAndUsage>
<Description>Rivaroxaban, a factor Xa (FXa) inhibitor, is the active ingredient in XARELTO® Tablets and XARELTO® for oral suspension with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban is C19H18ClN3O5S and the molecular weight is 435.89. The structural formula is. Rivaroxaban is a pure (S)-enantiomer. It is an odorless, non-hygroscopic, white to yellowish powder. Rivaroxaban is only slightly soluble in organic solvents (e.g., acetone, polyethylene glycol 400) and is practically insoluble in water and aqueous media. Each XARELTO tablet contains 2.5 mg, 10 mg, 15 mg, or 20 mg of rivaroxaban. The inactive ingredients of XARELTO are: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for XARELTO 2.5 mg is Opadry® Light Yellow, containing ferric oxide yellow, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 10 mg tablets is Opadry® Pink and for XARELTO 15 mg tablets is Opadry® Red, both containing ferric oxide red, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 20 mg tablets is Opadry® II Dark Red, containing ferric oxide red, polyethylene glycol 3350, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. XARELTO for oral suspension is supplied as granules in bottles containing 155 mg of rivaroxaban (1 mg of rivaroxaban per mL after reconstitution). The inactive ingredients are: anhydrous citric acid, hypromellose, mannitol, microcrystalline cellulose and carboxymethylcellulose sodium, sodium benzoate, sucralose, sweet and creamy flavor and xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>58411-579-10</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (58411-579-10) / 30 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>58411-0579-10</NDC11Code>
<ProductNDC>58411-579</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Shiseido Synchro Skin Radiant Lifting Foundation</ProprietaryName>
<ProprietaryNameSuffix>350</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate And Titanium Dioxide</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200920</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>SHISEIDO AMERICAS CORPORATION</LabelerName>
<SubstanceName>OCTINOXATE; TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>2.484; .36</StrengthNumber>
<StrengthUnit>g/30mL; g/30mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200920</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>63304-579-03</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE (63304-579-03)</PackageDescription>
<NDC11Code>63304-0579-03</NDC11Code>
<ProductNDC>63304-579</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoprolol Tartrate</ProprietaryName>
<NonProprietaryName>Metoprolol Tartrate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090324</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078459</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>METOPROLOL TARTRATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Hypertension. Metoprolol tartrate tablets are indicated for the treatment of hypertension. They may be used alone or in combination with other antihypertensive agents. Angina Pectoris. Metoprolol tartrate is indicated in the long-term treatment of angina pectoris. Myocardial Infarction. Metoprolol tartrate tablets are indicated in the treatment of hemodynamically stable patients with definite or suspected acute myocardial infarction to reduce cardiovascular mortality when used alone or in conjunction with intravenous metoprolol tartrate. Oral metoprolol tartrate therapy can be initiated after intravenous metoprolol tartrate therapy or, alternatively, oral treatment can begin within 3 to 10 days of the acute event (see DOSAGE AND ADMINISTRATION, CONTRAINDICATIONS, and WARNINGS).</IndicationAndUsage>
<Description>Metoprolol tartrate, USP is a selective beta1-adrenoreceptor blocking agent, available as 25, 50 and 100 mg tablets for oral administration. Metoprolol tartrate is (±)-1-(isopropylamino)-3-[p-(2-methoxyethyl)phenoxy]-2-propanol (2:1) dextro-tartrate salt, and its structural formula is. Metoprolol tartrate, USP is a white, practically odorless, crystalline powder with a molecular weight of 684.81. It is very soluble in water; freely soluble in methylene chloride, in chloroform, and in alcohol; slightly soluble in acetone; and insoluble in ether. Each tablet for oral administration contains 25 mg, 50 mg or 100 mg of metoprolol tartrate USP and the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose anhydrous, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, polyethylene glycol, pregelatinized starch, titanium dioxide. In addition the 25 mg and 100 mg tablet contain propylene glycol and sodium lauryl sulfate; the 50 mg tablet contains D&C Red #30 and talc.</Description>
</NDC>
<NDC>
<NDCCode>63304-579-10</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (63304-579-10)</PackageDescription>
<NDC11Code>63304-0579-10</NDC11Code>
<ProductNDC>63304-579</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoprolol Tartrate</ProprietaryName>
<NonProprietaryName>Metoprolol Tartrate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090324</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078459</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>METOPROLOL TARTRATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Hypertension. Metoprolol tartrate tablets are indicated for the treatment of hypertension. They may be used alone or in combination with other antihypertensive agents. Angina Pectoris. Metoprolol tartrate is indicated in the long-term treatment of angina pectoris. Myocardial Infarction. Metoprolol tartrate tablets are indicated in the treatment of hemodynamically stable patients with definite or suspected acute myocardial infarction to reduce cardiovascular mortality when used alone or in conjunction with intravenous metoprolol tartrate. Oral metoprolol tartrate therapy can be initiated after intravenous metoprolol tartrate therapy or, alternatively, oral treatment can begin within 3 to 10 days of the acute event (see DOSAGE AND ADMINISTRATION, CONTRAINDICATIONS, and WARNINGS).</IndicationAndUsage>
<Description>Metoprolol tartrate, USP is a selective beta1-adrenoreceptor blocking agent, available as 25, 50 and 100 mg tablets for oral administration. Metoprolol tartrate is (±)-1-(isopropylamino)-3-[p-(2-methoxyethyl)phenoxy]-2-propanol (2:1) dextro-tartrate salt, and its structural formula is. Metoprolol tartrate, USP is a white, practically odorless, crystalline powder with a molecular weight of 684.81. It is very soluble in water; freely soluble in methylene chloride, in chloroform, and in alcohol; slightly soluble in acetone; and insoluble in ether. Each tablet for oral administration contains 25 mg, 50 mg or 100 mg of metoprolol tartrate USP and the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose anhydrous, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, polyethylene glycol, pregelatinized starch, titanium dioxide. In addition the 25 mg and 100 mg tablet contain propylene glycol and sodium lauryl sulfate; the 50 mg tablet contains D&C Red #30 and talc.</Description>
</NDC>
<NDC>
<NDCCode>63323-579-05</NDCCode>
<PackageDescription>10 VIAL in 1 PACKAGE (63323-579-05) / 5 mL in 1 VIAL (63323-579-01) </PackageDescription>
<NDC11Code>63323-0579-05</NDC11Code>
<ProductNDC>63323-579</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sincalide</ProprietaryName>
<NonProprietaryName>Sincalide</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230401</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017697</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>SINCALIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>ug/5mL</StrengthUnit>
<Pharm_Classes>Cholecystokinin Analog [EPC], Cholecystokinin [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sincalide for Injection is indicated in adults to: : 1 to stimulate gallbladder contraction, as may be assessed by various methods of diagnostic imaging, or to obtain by duodenal aspiration a sample of concentrated bile for analysis of cholesterol, bile salts, phospholipids, and crystals; , 2 to stimulate pancreatic secretion in combination with secretin prior to obtaining a duodenal aspirate for analysis of enzyme activity, composition, and cytology; , 3 to accelerate the transit of a barium meal through the small bowel, thereby decreasing the time and extent of radiation associated with fluoroscopy and x-ray examination of the intestinal tract. .</IndicationAndUsage>
<Description>Sincalide for Injection is a cholecystopancreatic-gastrointestinal hormone for parenteral administration. The agent is a synthetically-prepared C-terminal octapeptide of cholecystokinin. Each single-dose vial of sincalide provides a sterile nonpyrogenic lyophilized white powder consisting of 5 mcg sincalide with 30 mg arginine hydrochloride, 15 mg lysine hydrochloride, 170 mg mannitol, 4 mg methionine, 2 mg pentetic acid, 0.005 mcg polysorbate 20, 9 mg potassium phosphate dibasic, and 0.04 mg sodium metabisulfite. The pH is adjusted to 6.0 to 8.0 with hydrochloric acid and/or sodium hydroxide prior to lyophilization. Sincalide is designated chemically as L-α-aspartyl-O-sulfo-L-tyrosyl-L-methionylglycyl-L-tryptophyl-L-methionyl- L-α-aspartyl-L-phenylalaninamide. Graphic formula:.</Description>
</NDC>
<NDC>
<NDCCode>63739-579-10</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BOX, UNIT-DOSE (63739-579-10) > 10 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>63739-0579-10</NDC11Code>
<ProductNDC>63739-579</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rivastigmine Tartrate</ProprietaryName>
<NonProprietaryName>Rivastigmine Tartrate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077129</ApplicationNumber>
<LabelerName>McKesson Corporation dba SKY Packaging</LabelerName>
<SubstanceName>RIVASTIGMINE TARTRATE</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-03-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>65219-579-01</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (65219-579-01) / 1 mL in 1 VIAL (65219-579-00) </PackageDescription>
<NDC11Code>65219-0579-01</NDC11Code>
<ProductNDC>65219-579</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carboprost Tromethamine</ProprietaryName>
<NonProprietaryName>Carboprost Tromethamine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20230612</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216882</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>CARBOPROST TROMETHAMINE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Prostaglandin Analog [EPC], Prostaglandins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-06-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230612</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carboprost tromethamine injection, USP is indicated for aborting pregnancy between the 13th and 20th weeks of gestation as calculated from the first day of the last normal menstrual period and in the following conditions related to second trimester abortion. 1. Failure of expulsion of the fetus during the course of treatment by another method; 2. Premature rupture of membranes in intrauterine methods with loss of drug and insufficient or absent uterine activity; 3. Requirement of a repeat intrauterine instillation of drug for expulsion of the fetus; 4. Inadvertent or spontaneous rupture of membranes in the presence of a previable fetus and absence of adequate activity for expulsion. Carboprost tromethamine injection is indicated for the treatment of postpartum hemorrhage due to uterine atony which has not responded to conventional methods of management. Prior treatment should include the use of intravenously administered oxytocin, manipulative techniques such as uterine massage and, unless contraindicated, intramuscular ergot preparations. Studies have shown that in such cases, the use of carboprost tromethamine injection has resulted in satisfactory control of hemorrhage, although it is unclear whether or not ongoing or delayed effects of previously administered ecbolic agents have contributed to the outcome. In a high proportion of cases, carboprost tromethamine injection used in this manner has resulted in the cessation of life threatening bleeding and the avoidance of emergency surgical intervention.</IndicationAndUsage>
<Description>Carboprost tromethamine injection, USP an oxytocic, contains the tromethamine salt of the (15S)-15 methyl analogue of naturally occurring prostaglandin F2α in a solution suitable for intramuscular injection. Carboprost tromethamine is the established name for the active ingredient in carboprost tromethamine injection, USP. Four other chemical names are. 1. (15S)-15-methyl prostaglandin F2α tromethamine salt 2. 7-(3α,5α-dihydroxy-2ß-[(3S)-3-hydroxy-3-methyl-trans-1-octenyl]-1α-cyclopentyl]-cis-5-heptenoic acid compound with 2-amino-2-(hydroxymethyl) 1,3-propanediol 3. (15S)-9α,11α,15-trihydroxy-15-methylprosta-cis-5, trans-13-dienoic acid tromethamine salt 4. (15S)-15-methyl PGF2α-THAM. The structural formula is represented below. The molecular formula is C25H47O8N. The molecular weight of carboprost tromethamine, USP is 489.64. It is a white to slightly off-white crystalline powder. It generally melts between 95° and 105° C, depending on the rate of heating. Carboprost tromethamine, USP dissolves readily in water at room temperature at a concentration greater than 75 mg/mL. Each mL of carboprost tromethamine injection, USP contains carboprost tromethamine, USP equivalent to 250 mcg of carboprost, 83 mcg tromethamine, 9 mg sodium chloride, and 9.45 mg benzyl alcohol added as preservative. When necessary, pH is adjusted with sodium hydroxide and/or hydrochloric acid. The solution is sterile.</Description>
</NDC>
<NDC>
<NDCCode>67457-579-01</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (67457-579-01) * 10 mL in 1 VIAL, GLASS (67457-577-50) * 10 mL in 1 VIAL, GLASS (67457-578-10) </PackageDescription>
<NDC11Code>67457-0579-01</NDC11Code>
<ProductNDC>67457-579</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Melphalan Hydrochloride</ProprietaryName>
<NonProprietaryName>Melphalan Hydrochloride</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20140929</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090270</ApplicationNumber>
<LabelerName>Mylan Institutional LLC</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2023-05-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140929</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>69423-579-10</NDCCode>
<PackageDescription>107 g in 1 CYLINDER (69423-579-10) </PackageDescription>
<NDC11Code>69423-0579-10</NDC11Code>
<ProductNDC>69423-579</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Gillette Clear Plus Dri-tech Power Rush</ProprietaryName>
<NonProprietaryName>Aluminum Zirconium Octachlorohydrex Gly</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20210901</StartMarketingDate>
<EndMarketingDate>20250201</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M019</ApplicationNumber>
<LabelerName>The Procter & Gamble Manufacturing Company</LabelerName>
<SubstanceName>ALUMINUM ZIRCONIUM OCTACHLOROHYDREX GLY</SubstanceName>
<StrengthNumber>17</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-02-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20210901</StartMarketingDatePackage>
<EndMarketingDatePackage>20250201</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>reduces underarm wetness.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>71919-579-10</NDCCode>
<PackageDescription>100 mL in 1 BOTTLE, GLASS (71919-579-10) </PackageDescription>
<NDC11Code>71919-0579-10</NDC11Code>
<ProductNDC>71919-579</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Rheum Officinale</ProprietaryName>
<NonProprietaryName>Rheum Officinale Root</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090401</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>RHEUM OFFICINALE ROOT</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-03-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>76420-008-10</NDCCode>
<PackageDescription>10 mL in 1 VIAL, SINGLE-DOSE (76420-008-10) </PackageDescription>
<NDC11Code>76420-0008-10</NDC11Code>
<ProductNDC>76420-008</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INTRACAUDAL</RouteName>
<StartMarketingDate>20131105</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203895</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-10-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200116</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupivacaine hydrochloride injection, USP is indicated for the production of local or regional anesthesia or analgesia for surgery, oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Only the 0.25% and 0.5% concentrations are indicated for obstetrical anesthesia. (See WARNINGS.) Experience with nonobstetrical surgical procedures in pregnant patients is not sufficient to recommend use of 0.75% concentration of bupivacaine hydrochloride injection, USP in these patients. Bupivacaine hydrochloride injection, USP is not recommended for intravenous regional anesthesia (Bier Block). See WARNINGS. The routes of administration and indicated bupivacaine hydrochloride injection, USP concentrations are:. (See DOSAGE AND ADMINISTRATION for additional information.) Standard textbooks should be consulted to determine the accepted procedures and techniques for the administration of bupivacaine hydrochloride injection, USP.</IndicationAndUsage>
<Description>Bupivacaine hydrochloride USP is 2-Piperidinecarboxamide, 1-butyl- N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate, a white, odorless, crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula:. Bupivacaine hydrochloride injection, USP is available in sterile isotonic solution for injection via local infiltration, peripheral nerve block, and caudal and lumbar epidural blocks. Solution of bupivacaine hydrochloride injection, USP may be autoclaved. Solution is clear and colorless. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage. Bupivacaine hydrochloride injection, USP — Sterile isotonic solution containing sodium chloride. The pH of the solution is adjusted to between 4 and 6.5 with sodium hydroxide or hydrochloric acid.</Description>
</NDC>
<NDC>
<NDCCode>76420-016-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (76420-016-01) / 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>76420-0016-01</NDC11Code>
<ProductNDC>76420-016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Triamcinolone Acetonide</ProprietaryName>
<NonProprietaryName>Triamcinolone Acetonide</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>INTRA-ARTICULAR; INTRAMUSCULAR</RouteName>
<StartMarketingDate>20191119</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207550</ApplicationNumber>
<LabelerName>ASCLEMED USA INC.</LabelerName>
<SubstanceName>TRIAMCINOLONE ACETONIDE</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250620</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Intramuscular. Where oral therapy is not feasible, injectable corticosteroid therapy, including triamcinolone acetonide injectable suspension is indicated for intramuscular useas follows:. Allergic states:Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, perennial or seasonal allergic rhinitis, serum sickness, transfusion reactions. Dermatologic diseases:Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders:Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases:To tide the patient over a critical period of the disease in regional enteritis and ulcerative colitis. Hematologic disorders:Acquired (autoimmune) hemolytic anemia, Diamond-Blackfan anemia, pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous:Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used with appropriate antituberculous chemotherapy. Neoplastic diseases:For the palliative management of leukemias and lymphomas. Nervous system:Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor or craniotomy. Ophthalmic diseases:Sympathetic ophthalmia, temporal arteritis, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases:To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases:Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders:As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, polymyositis and systemic lupus erythematosus. Intra-Articular. The intra-articular or soft tissue administrationof triamcinolone acetonide injectable suspension is indicated as adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis, acute and subacute bursitis, acute nonspecific tenosynovitis, epicondylitis, rheumatoid arthritis, synovitis of osteoarthritis.</IndicationAndUsage>
<Description>Triamcinolone acetonide injectable suspension, USP is a synthetic glucocorticoid corticosteroid with anti-inflammatory action. THIS FORMULATION IS SUITABLE FOR INTRAMUSCULAR AND INTRA-ARTICULAR USE ONLY. THIS FORMULATION IS NOT FOR INTRADERMAL INJECTION. Each mL of the sterile aqueous suspension provides 40 mg triamcinolone acetonide, USP, with 0.65% sodium chloride for isotonicity, 0.99% (w/v) benzyl alcohol as a preservative, 0.75% carboxymethylcellulose sodium, and 0.04% polysorbate 80 in an aqueous suspension. Sodium hydroxide or hydrochloric acid may be present to adjust pH to 5.0 to 7.5. At the time of manufacture, the air in the container is replaced by nitrogen. The chemical name for triamcinolone acetonide is 9-Fluoro-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with acetone. Its structural formula is. Triamcinolone acetonide, USP occurs as a white to cream-colored, crystalline powder having not more than a slight odor and is practically insoluble in water and very soluble in alcohol.</Description>
</NDC>
<NDC>
<NDCCode>76420-016-10</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (76420-016-10) / 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>76420-0016-10</NDC11Code>
<ProductNDC>76420-016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Triamcinolone Acetonide</ProprietaryName>
<NonProprietaryName>Triamcinolone Acetonide</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>INTRA-ARTICULAR; INTRAMUSCULAR</RouteName>
<StartMarketingDate>20191119</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207550</ApplicationNumber>
<LabelerName>ASCLEMED USA INC.</LabelerName>
<SubstanceName>TRIAMCINOLONE ACETONIDE</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250620</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Intramuscular. Where oral therapy is not feasible, injectable corticosteroid therapy, including triamcinolone acetonide injectable suspension is indicated for intramuscular useas follows:. Allergic states:Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, perennial or seasonal allergic rhinitis, serum sickness, transfusion reactions. Dermatologic diseases:Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders:Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases:To tide the patient over a critical period of the disease in regional enteritis and ulcerative colitis. Hematologic disorders:Acquired (autoimmune) hemolytic anemia, Diamond-Blackfan anemia, pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous:Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used with appropriate antituberculous chemotherapy. Neoplastic diseases:For the palliative management of leukemias and lymphomas. Nervous system:Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor or craniotomy. Ophthalmic diseases:Sympathetic ophthalmia, temporal arteritis, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases:To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases:Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders:As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, polymyositis and systemic lupus erythematosus. Intra-Articular. The intra-articular or soft tissue administrationof triamcinolone acetonide injectable suspension is indicated as adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis, acute and subacute bursitis, acute nonspecific tenosynovitis, epicondylitis, rheumatoid arthritis, synovitis of osteoarthritis.</IndicationAndUsage>
<Description>Triamcinolone acetonide injectable suspension, USP is a synthetic glucocorticoid corticosteroid with anti-inflammatory action. THIS FORMULATION IS SUITABLE FOR INTRAMUSCULAR AND INTRA-ARTICULAR USE ONLY. THIS FORMULATION IS NOT FOR INTRADERMAL INJECTION. Each mL of the sterile aqueous suspension provides 40 mg triamcinolone acetonide, USP, with 0.65% sodium chloride for isotonicity, 0.99% (w/v) benzyl alcohol as a preservative, 0.75% carboxymethylcellulose sodium, and 0.04% polysorbate 80 in an aqueous suspension. Sodium hydroxide or hydrochloric acid may be present to adjust pH to 5.0 to 7.5. At the time of manufacture, the air in the container is replaced by nitrogen. The chemical name for triamcinolone acetonide is 9-Fluoro-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with acetone. Its structural formula is. Triamcinolone acetonide, USP occurs as a white to cream-colored, crystalline powder having not more than a slight odor and is practically insoluble in water and very soluble in alcohol.</Description>
</NDC>
<NDC>
<NDCCode>76420-018-10</NDCCode>
<PackageDescription>10 mL in 1 VIAL, SINGLE-DOSE (76420-018-10) </PackageDescription>
<NDC11Code>76420-0018-10</NDC11Code>
<ProductNDC>76420-018</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL</RouteName>
<StartMarketingDate>20131105</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203895</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200409</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupivacaine hydrochloride injection, USP is indicated for the production of local or regional anesthesia or analgesia for surgery, oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Only the 0.25% and 0.5% concentrations are indicated for obstetrical anesthesia. (See WARNINGS.) Experience with nonobstetrical surgical procedures in pregnant patients is not sufficient to recommend use of 0.75% concentration of bupivacaine hydrochloride injection, USP in these patients. Bupivacaine hydrochloride injection, USP is not recommended for intravenous regional anesthesia (Bier Block). See WARNINGS. The routes of administration and indicated bupivacaine hydrochloride injection, USP concentrations are:. (See DOSAGE AND ADMINISTRATION for additional information.) Standard textbooks should be consulted to determine the accepted procedures and techniques for the administration of bupivacaine hydrochloride injection, USP.</IndicationAndUsage>
<Description>Bupivacaine hydrochloride USP is 2-Piperidinecarboxamide, 1-butyl- N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate, a white, odorless, crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula:. Bupivacaine hydrochloride injection, USP is available in sterile isotonic solution for injection via local infiltration, peripheral nerve block, and caudal and lumbar epidural blocks. Solution of bupivacaine hydrochloride injection, USP may be autoclaved. Solution is clear and colorless. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage. Bupivacaine hydrochloride injection, USP — Sterile isotonic solution containing sodium chloride. The pH of the solution is adjusted to between 4 and 6.5 with sodium hydroxide or hydrochloric acid.</Description>
</NDC>
<NDC>
<NDCCode>76420-021-10</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (76420-021-10) </PackageDescription>
<NDC11Code>76420-0021-10</NDC11Code>
<ProductNDC>76420-021</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170410</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040275</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-10-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200929</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol tablets are indicated in the: 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause. , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. , 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. , 4 Treatment of breast cancer (for palliation only) in appropriately selected women and men with metastatic disease. , 5 Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only). , 6 Prevention of osteoporosis. When prescribing solely for the prevention of postmenopausal osteoporosis, therapy should only be considered for women at significant risk of osteoporosis and for whom non-estrogen medications are not considered to be appropriate (See CLINICAL PHARMACOLOGY, Clinical Studies). .</IndicationAndUsage>
<Description>Estradiol tablets, USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white, crystalline solid, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is. In addition, each tablet for oral administration contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>76420-022-10</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (76420-022-10) </PackageDescription>
<NDC11Code>76420-0022-10</NDC11Code>
<ProductNDC>76420-022</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170410</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040275</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-10-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200929</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol tablets are indicated in the: 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause. , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. , 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. , 4 Treatment of breast cancer (for palliation only) in appropriately selected women and men with metastatic disease. , 5 Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only). , 6 Prevention of osteoporosis. When prescribing solely for the prevention of postmenopausal osteoporosis, therapy should only be considered for women at significant risk of osteoporosis and for whom non-estrogen medications are not considered to be appropriate (See CLINICAL PHARMACOLOGY, Clinical Studies). .</IndicationAndUsage>
<Description>Estradiol tablets, USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white, crystalline solid, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is. In addition, each tablet for oral administration contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>76420-023-10</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (76420-023-10) </PackageDescription>
<NDC11Code>76420-0023-10</NDC11Code>
<ProductNDC>76420-023</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170410</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040275</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-10-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200929</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol tablets are indicated in the: 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause. , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. , 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. , 4 Treatment of breast cancer (for palliation only) in appropriately selected women and men with metastatic disease. , 5 Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only). , 6 Prevention of osteoporosis. When prescribing solely for the prevention of postmenopausal osteoporosis, therapy should only be considered for women at significant risk of osteoporosis and for whom non-estrogen medications are not considered to be appropriate (See CLINICAL PHARMACOLOGY, Clinical Studies). .</IndicationAndUsage>
<Description>Estradiol tablets, USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white, crystalline solid, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is. In addition, each tablet for oral administration contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>76420-024-10</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE (76420-024-10) </PackageDescription>
<NDC11Code>76420-0024-10</NDC11Code>
<ProductNDC>76420-024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eszopiclone</ProprietaryName>
<NonProprietaryName>Eszopiclone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150131</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202929</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>ESZOPICLONE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200617</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Eszopiclone tablets are indicated for the treatment of insomnia. In controlled outpatient and sleep laboratory studies, eszopiclone tablets administered at bedtime decreased sleep latency and improved sleep maintenance. The clinical trials performed in support of efficacy were up to 6 months in duration. The final formal assessments of sleep latency and maintenance were performed at 4 weeks in the 6-week study (adults only), at the end of both 2-week studies (elderly only) and at the end of the 6-month study (adults only).</IndicationAndUsage>
<Description>Eszopiclone, USP is a nonbenzodiazepine hypnotic agent that is a pyrrolopyrazine derivative of the cyclopyrrolone class. The chemical name of eszopiclone is (+)-(5S)-6-(5chloropyridin-2-yl)-7-oxo-6,7-dihydro-5H-pyrrolo[3,4-b] pyrazin-5-yl 4-methylpiperazine-1carboxylate. Its molecular weight is 388.81, and its empirical formula is C 17H 17C lN 6O 3. Eszopiclone, USP has a single chiral center with an (S)-configuration. It has the following chemical structure:. Eszopiclone, USP is a white to light-yellow crystalline solid. Eszopiclone is very slightly soluble in water, slightly soluble in ethanol, and soluble in phosphate buffer (pH 3.2). Eszopiclone, USP is formulated as film-coated tablets for oral administration. Eszopiclone tablets, USP contain 1 mg, 2 mg, or 3 mg eszopiclone, USP and the following inactive ingredients: dibasic calcium phosphate dihydrate, colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide, and triacetin. In addition, both the 1 mg and 3 mg tablets contain FD&C Blue #2.</Description>
</NDC>
<NDC>
<NDCCode>76420-026-10</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE (76420-026-10) </PackageDescription>
<NDC11Code>76420-0026-10</NDC11Code>
<ProductNDC>76420-026</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eszopiclone</ProprietaryName>
<NonProprietaryName>Eszopiclone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150131</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202929</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>ESZOPICLONE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200617</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Eszopiclone tablets are indicated for the treatment of insomnia. In controlled outpatient and sleep laboratory studies, eszopiclone tablets administered at bedtime decreased sleep latency and improved sleep maintenance. The clinical trials performed in support of efficacy were up to 6 months in duration. The final formal assessments of sleep latency and maintenance were performed at 4 weeks in the 6-week study (adults only), at the end of both 2-week studies (elderly only) and at the end of the 6-month study (adults only).</IndicationAndUsage>
<Description>Eszopiclone, USP is a nonbenzodiazepine hypnotic agent that is a pyrrolopyrazine derivative of the cyclopyrrolone class. The chemical name of eszopiclone is (+)-(5S)-6-(5chloropyridin-2-yl)-7-oxo-6,7-dihydro-5H-pyrrolo[3,4-b] pyrazin-5-yl 4-methylpiperazine-1carboxylate. Its molecular weight is 388.81, and its empirical formula is C 17H 17C lN 6O 3. Eszopiclone, USP has a single chiral center with an (S)-configuration. It has the following chemical structure:. Eszopiclone, USP is a white to light-yellow crystalline solid. Eszopiclone is very slightly soluble in water, slightly soluble in ethanol, and soluble in phosphate buffer (pH 3.2). Eszopiclone, USP is formulated as film-coated tablets for oral administration. Eszopiclone tablets, USP contain 1 mg, 2 mg, or 3 mg eszopiclone, USP and the following inactive ingredients: dibasic calcium phosphate dihydrate, colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide, and triacetin. In addition, both the 1 mg and 3 mg tablets contain FD&C Blue #2.</Description>
</NDC>
<NDC>
<NDCCode>76420-027-10</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE (76420-027-10) </PackageDescription>
<NDC11Code>76420-0027-10</NDC11Code>
<ProductNDC>76420-027</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eszopiclone</ProprietaryName>
<NonProprietaryName>Eszopiclone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140425</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202929</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>ESZOPICLONE</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200617</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Eszopiclone tablets are indicated for the treatment of insomnia. In controlled outpatient and sleep laboratory studies, eszopiclone tablets administered at bedtime decreased sleep latency and improved sleep maintenance. The clinical trials performed in support of efficacy were up to 6 months in duration. The final formal assessments of sleep latency and maintenance were performed at 4 weeks in the 6-week study (adults only), at the end of both 2-week studies (elderly only) and at the end of the 6-month study (adults only).</IndicationAndUsage>
<Description>Eszopiclone, USP is a nonbenzodiazepine hypnotic agent that is a pyrrolopyrazine derivative of the cyclopyrrolone class. The chemical name of eszopiclone is (+)-(5S)-6-(5chloropyridin-2-yl)-7-oxo-6,7-dihydro-5H-pyrrolo[3,4-b] pyrazin-5-yl 4-methylpiperazine-1carboxylate. Its molecular weight is 388.81, and its empirical formula is C 17H 17C lN 6O 3. Eszopiclone, USP has a single chiral center with an (S)-configuration. It has the following chemical structure:. Eszopiclone, USP is a white to light-yellow crystalline solid. Eszopiclone is very slightly soluble in water, slightly soluble in ethanol, and soluble in phosphate buffer (pH 3.2). Eszopiclone, USP is formulated as film-coated tablets for oral administration. Eszopiclone tablets, USP contain 1 mg, 2 mg, or 3 mg eszopiclone, USP and the following inactive ingredients: dibasic calcium phosphate dihydrate, colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide, and triacetin. In addition, both the 1 mg and 3 mg tablets contain FD&C Blue #2.</Description>
</NDC>
<NDC>
<NDCCode>76420-032-10</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE (76420-032-10) </PackageDescription>
<NDC11Code>76420-0032-10</NDC11Code>
<ProductNDC>76420-032</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
<NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19980617</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074754</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-09-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220916</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of Ketorolac Tromethamine Tablets USP and other treatment options before deciding to use Ketorolac Tromethamine Tablets USP. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals.</IndicationAndUsage>
<Description>Ketorolac Tromethamine Tablets USP are a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine, USP is (±)-5-benzoyl-2,3-dihydro-1 H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol (1:1). The structural formula is:. C 15H 13NO 3.C 4H 11NO 3M.W. 376.40. Ketorolac tromethamine, USP is a racemic mixture of [-]S and [+]R ketorolac tromethamine, USP. Ketorolac tromethamine, USP may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine, USP has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. Ketorolac Tromethamine Tablets USP are white, round, convex, unscored, film-coated tablets. Each tablet, for oral administration, contains 10 mg ketorolac tromethamine, USP, the active ingredient. In addition, each tablet contains the following inactive ingredients: hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>76420-039-10</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE (76420-039-10) </PackageDescription>
<NDC11Code>76420-0039-10</NDC11Code>
<ProductNDC>76420-039</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Meloxicam</ProprietaryName>
<NonProprietaryName>Meloxicam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070307</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077927</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>MELOXICAM</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200904</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Meloxicam tablets are a non-steroidal anti-inflammatory drug indicated for: 1 Osteoarthritis (OA) ( 1.1) , 2 Rheumatoid Arthritis (RA) ( 1.2) , 3 Juvenile Rheumatoid Arthritis (JRA) in patients who weigh ≥60 kg ( 1.3) .</IndicationAndUsage>
<Description>Meloxicam Tablets USP are a nonsteroidal anti-inflammatory drug (NSAID). Each tablet contains 7.5 mg or 15 mg meloxicam for oral administration. Meloxicam is chemically designated as 4-hydroxy-2-methyl- N-(5-methyl-2-thiazolyl)-2 H-1,2-benzothiazine-3-carboxamide-1,1-dioxide. The molecular weight is 351.4. Its empirical formula is C 14H 13N 3O 4S 2and it has the following structural formula:. Chemical Structure. Meloxicam is a pastel yellow solid, practically insoluble in water, with higher solubility observed in strong acids and bases. It is very slightly soluble in methanol. Meloxicam has an apparent partition coefficient (log P)app = 0.1 in n-octanol/buffer pH 7.4. Meloxicam has pKa values of 1.1 and 4.2. Meloxicam is available as a tablet for oral administration containing 15 mg meloxicam. The inactive ingredients in Meloxicam tablets USP include colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone and sodium citrate dihydrate.</Description>
</NDC>
<NDC>
<NDCCode>76420-042-10</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE, PLASTIC (76420-042-10) </PackageDescription>
<NDC11Code>76420-0042-10</NDC11Code>
<ProductNDC>76420-042</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Naproxen</ProprietaryName>
<NonProprietaryName>Naproxen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160706</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091416</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>NAPROXEN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-10-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200205</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CAREFULLY CONSIDER THE POTENTIAL BENEFITS AND RISKS OF NAPROXEN AND OTHER TREATMENT OPTIONS BEFORE DECIDING TO USE NAPROXEN TABLETS. USE THE LOWEST EFFECTIVE DOSE FOR THE SHORTEST DURATION CONSISTENT WITH INDIVIDUAL PATIENT TREATMENT GOALS (SEE WARNINGS: GASTROINTESTINAL BLEEDING, ULCERATION, AND PERFORATION). NAPROXEN TABLETS ARE INDICATED. FOR THE RELIEF OF THE SIGNS AND SYMPTOMS OF RHEUMATOID ARTHRITIS. FOR THE RELIEF OF THE SIGNS AND SYMPTOMS OF OSTEOARTHRITIS. FOR THE RELIEF OF THE SIGNS AND SYMPTOMS OF ANKYLOSING SPONDYLITIS. FOR THE RELIEF OF THE SIGNS AND SYMPTOMS OF JUVENILE ARTHRITIS. NAPROXEN TABLETS ARE ALSO INDICATED. FOR RELIEF OF THE SIGNS AND SYMPTOMS OF TENDONITIS. FOR RELIEF OF THE SIGNS AND SYMPTOMS OF BURSITIS. FOR RELIEF OF THE SIGNS AND SYMPTOMS OF ACUTE GOUT. FOR THE MANAGEMENT OF PAIN. FOR THE MANAGEMENT OF PRIMARY DYSMENORRHEA.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>76420-044-10</NDCCode>
<PackageDescription>10 CAPSULE in 1 BOTTLE (76420-044-10) </PackageDescription>
<NDC11Code>76420-0044-10</NDC11Code>
<ProductNDC>76420-044</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline Hyclate</ProprietaryName>
<NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19840911</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062500</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200904</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline and other antibacterial drugs, doxycycline should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Doxycycline is an antibacterial drug synthetically derived from oxytetracycline, and is available as Doxycycline Hyclate Capsules; for oral administration. The structural formula of doxycycline monohydrate is. with a molecular formula of C 22H 24N 2O 8∙H 2O and a molecular weight of 462.46. The chemical designation for doxycycline is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrate. The molecular formula for doxycycline hydrochloride hemiethanolate hemihydrate is (C 22H 24N 2O 8∙HCl) 2∙C 2H 6O∙H 2O and the molecular weight is 1025.89. Doxycycline is a light-yellow crystalline powder. Doxycycline hyclate is soluble in water, while doxycycline monohydrate is very slightly soluble in water. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inactive ingredients in the capsule formulations are: colloidal silicon dioxide, lactose anhydrous, magnesium stearate, methylcellulose, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, and stearic acid. 100 mg gelatin capsule shell contains: FD&C Blue #1, titanium dioxide and gelatin. Black ink contains shellac glaze in SD-45, black iron oxide, propylene glycol, FD&C Blue #2, FD&C Red # 40, FD&C Blue # 1, D&C Yellow # 10, butyl alcohol, denatured alcohol. Each capsule, for oral administration, contains doxycycline hyclate equivalent to 100 mg of doxycycline.</Description>
</NDC>
<NDC>
<NDCCode>76420-045-10</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE (76420-045-10) </PackageDescription>
<NDC11Code>76420-0045-10</NDC11Code>
<ProductNDC>76420-045</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ciprofloxacin</ProprietaryName>
<NonProprietaryName>Ciprofloxacin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070426</StartMarketingDate>
<EndMarketingDate>20261031</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077859</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>CIPROFLOXACIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 1A2 Inhibitors [MoA], Fluoroquinolone Antibacterial [EPC], Fluoroquinolones [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200904</StartMarketingDatePackage>
<EndMarketingDatePackage>20261031</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ciprofloxacin tablet is a fluoroquinolone antibacterial indicated in adults (18 years of age and older) with the following infections caused by designated, susceptible bacteria and in pediatric patients where indicated: : 1 Skin and Skin Structure Infections ( 1.1) , 2 Bone and Joint Infections ( 1.2) , 3 Complicated Intra-Abdominal Infections ( 1.3) , 4 Infectious Diarrhea ( 1.4) , 5 Typhoid Fever (Enteric Fever) ( 1.5) , 6 Uncomplicated Cervical and Urethral Gonorrhea ( 1.6) , 7 Inhalational Anthrax post-exposure in adult and pediatric patients ( 1.7) , 8 Plague in adult and pediatric patients ( 1.8) , 9 Chronic Bacterial Prostatitis ( 1.9) , 10 Lower Respiratory Tract Infections ( 1.10) Acute Exacerbation of Chronic Bronchitis, 11 Urinary Tract Infections ( 1.11) Urinary Tract Infections (UTI)Acute Uncomplicated CystitisComplicated UTI and Pyelonephritis in Pediatric Patients, 12 Acute Sinusitis ( 1.12) .</IndicationAndUsage>
<Description>Ciprofloxacin tablets, USP are synthetic antimicrobial agents for oral administration. Ciprofloxacin hydrochloride, USP, a fluoroquinolone, is the monohydrochloride monohydrate salt of 1-cyclopropyl-6-fluoro-1, 4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. It is a faintly yellowish to light yellow crystalline substance with a molecular weight of 385.8. Its molecular formula is C 17H 18FN 3O 3HClH 2O and its chemical structure is as follows:. Ciprofloxacin is 1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. Its molecular formula is C 17H 18FN 3O 3and its molecular weight is 331.4. It is a faintly yellowish to light yellow crystalline substance and its chemical structure is as follows:. Ciprofloxacin film-coated tablets are available in 500 mg (ciprofloxacin equivalent) strengths. Each ciprofloxacin film-coated tablet contains 500 mg (equivalent to 582 mg ciprofloxacin hydrochloride monohydrate). Ciprofloxacin tablets, USP are white to off-white. The inactive ingredients are colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, sodium starch glycolate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>76420-055-10</NDCCode>
<PackageDescription>100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (76420-055-10) </PackageDescription>
<NDC11Code>76420-0055-10</NDC11Code>
<ProductNDC>76420-055</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omeprazole</ProprietaryName>
<NonProprietaryName>Omeprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141031</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091672</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>OMEPRAZOLE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200116</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Omeprazole delayed-release capsules are a proton pump inhibitor (PPI) indicated for the:. Treatment of active duodenal ulcer in adults ( 1.1) . Eradication of Helicobacter pylorito reduce the risk of duodenal ulcer recurrence in adults ( 1.2) . Treatment of active benign gastric ulcer in adults ( 1.3) . Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 2 years of age and older ( 1.4) . Maintenance of healing of EE due to acid-mediated GERD in patients 2 years of age and older ( 1.6) . Pathologic hypersecretory conditions in adults ( 1.7) .</IndicationAndUsage>
<Description>The active ingredient in Omeprazole Delayed-Release Capsules, USP is a substituted benzimidazole, 5-methoxy-2[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C 17H 19N 3O 3S, with a molecular weight of 345.42 g/mol. The structural formula is:. Omeprazole, USP is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole, USP is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg or 40 mg of omeprazole, USP in the form of enteric-coated granules with the following inactive ingredients: anhydrous lactose, cetyl alcohol, di-sodium hydrogen phosphate dihydrate, hypromellose, hypromellose phthalate, mannitol, simethicone emulsion 30%, sodium lauryl sulfate and sugar sphere. The capsule shell for Omeprazole Delayed-Release Capsules, USP 10 mg contains D&C Yellow No.10, FD&C Blue No.1, FD&C Red No. 40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for Omeprazole Delayed-Release Capsules, USP 20 mg contains FD&C Blue No.1, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for Omeprazole Delayed-Release Capsules, USP 40 mg contains D&C Yellow No.10, FD&C Blue No.1, FD&C Red No. 40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The imprinting ink has the following components: black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, strong ammonia solution and shellac.</Description>
</NDC>
<NDC>
<NDCCode>76420-056-10</NDCCode>
<PackageDescription>10 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK (76420-056-10) </PackageDescription>
<NDC11Code>76420-0056-10</NDC11Code>
<ProductNDC>76420-056</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ondansetron</ProprietaryName>
<NonProprietaryName>Ondansetron</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100412</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090469</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>ONDANSETRON</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200205</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ondansetron orally disintegrating tablets are indicated for the prevention of nausea and vomiting associated with: 1 highly emetogenic cancer chemotherapy, including cisplatin greater than or equal to 50 mg/m 2, 2 initial and repeat courses of moderately emetogenic cancer chemotherapy, 3 radiotherapy in patients receiving either total body irradiation, single high-dose fraction to the abdomen, or daily fractions to the abdomen .</IndicationAndUsage>
<Description>The active ingredient in ondansetron orally disintegrating tablets, USP is ondansetron base, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT 3receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one. It has the following structural formula: The molecular formula is C 18H 19N 3O representing a molecular weight of 293.4. Ondansetron is a white to off-white powder. Each 4 mg ondansetron orally disintegrating tablet, USP for oral administration contains 4 mg ondansetron base. Each ondansetron orally disintegrating tablet, USP also contains the inactive ingredients mannitol, crospovidone, lactose monohydrate, microcrystalline cellulose, aspartame, strawberry guarana flavor, colloidal silicon dioxide, and magnesium stearate. The strawberry guarana flavor contains maltodextrin, propylene glycol, artificial flavors, and acetic acid. Ondansetron orally disintegrating tablets, USP are orally administered formulation of ondansetron which disintegrates on the tongue and does not require water to aid dissolution or swallowing. Meets USP Disintegration Test 2.</Description>
</NDC>
<NDC>
<NDCCode>76420-058-10</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (76420-058-10) </PackageDescription>
<NDC11Code>76420-0058-10</NDC11Code>
<ProductNDC>76420-058</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Progesterone</ProprietaryName>
<NonProprietaryName>Progesterone</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170911</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207724</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>PROGESTERONE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Progesterone [CS], Progesterone [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-10-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191216</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Progesterone capsules are indicated for use in the prevention of endometrial hyperplasia in nonhysterectomized postmenopausal women who are receiving conjugated estrogens tablets. They are also indicated for use in secondary amenorrhea.</IndicationAndUsage>
<Description>Progesterone capsules contain progesterone, USP for oral administration. Progesterone, USP has a molecular weight of 314.47 and a molecular formula of C 21H 30O 2. Progesterone, USP (pregn-4-ene-3, 20-dione) is a white or creamy white, odorless, crystalline powder practically insoluble in water, soluble in alcohol, acetone and dioxane and sparingly soluble in vegetable oils, stable in air, melting between 126° and 131°C. The structural formula is:. Progesterone, USP is synthesized from a starting material from a plant source and is chemically identical to progesterone of human ovarian origin. Progesterone capsules are available in multiple strengths to afford dosage flexibility for optimum management. Progesterone capsules contain either 100 mg or 200 mg progesterone, USP. The inactive ingredients for progesterone capsules 100 mg and 200 mg include: arachis oil, D&C Yellow No. 10 aluminum lake, FD&C Yellow No. 6 aluminum lake, gelatin, glycerin, purified water, soy lecithin and titanium dioxide.</Description>
</NDC>
</NDCList>