RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>77824-000-48</NDCCode>
    <PackageDescription>48 PATCH in 1 POUCH (77824-000-48)  &gt; 62.4 g in 1 PATCH</PackageDescription>
    <NDC11Code>77824-0000-48</NDC11Code>
    <ProductNDC>77824-000</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Dodys</ProprietaryName>
    <NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
    <DosageFormName>CLOTH</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20200622</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part333E</ApplicationNumber>
    <LabelerName>Betone, S.A. de C.V.</LabelerName>
    <SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
    <StrengthNumber>1.3</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2022-01-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200622</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>For hand washing to decrease bacteria on the skin.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>77824-001-01</NDCCode>
    <PackageDescription>48 CLOTH in 1 PACKET (77824-001-01) </PackageDescription>
    <NDC11Code>77824-0001-01</NDC11Code>
    <ProductNDC>77824-001</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Dodys Wipes</ProprietaryName>
    <NonProprietaryName>Antiseptic Hand Sanitizer Wipes</NonProprietaryName>
    <DosageFormName>CLOTH</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20230626</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>505G(a)(3)</ApplicationNumber>
    <LabelerName>Betone SA de CV</LabelerName>
    <SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
    <StrengthNumber>.13</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2024-11-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230626</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>For hand washing to decrease bacteria on the skin.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>41520-446-48</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (41520-446-48)  *  8 BLISTER PACK in 1 CARTON (41520-000-16)  &gt; 2 CAPSULE in 1 BLISTER PACK *  16 BLISTER PACK in 1 CARTON (41520-010-32)  &gt; 2 CAPSULE in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>41520-0446-48</NDC11Code>
    <ProductNDC>41520-446</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Daytime Nitetime Cold Flu Relief</ProprietaryName>
    <NonProprietaryName>Acetaminophen, Dextromethorphan Hbr, Phenylephrine Hcl, Doxylamine Succinate</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20141030</StartMarketingDate>
    <EndMarketingDate>20201030</EndMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
    <ApplicationNumber>part341</ApplicationNumber>
    <LabelerName>Care One (American Sales Company)</LabelerName>
    <Status>Deprecated</Status>
    <LastUpdate>2020-11-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20141030</StartMarketingDatePackage>
    <EndMarketingDatePackage>20201030</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>78852-000-48</NDCCode>
    <PackageDescription>4500 mL in 1 BOTTLE, PUMP (78852-000-48) </PackageDescription>
    <NDC11Code>78852-0000-48</NDC11Code>
    <ProductNDC>78852-000</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Si Master Hand Sanitizer</ProprietaryName>
    <NonProprietaryName>Ethyl Alcohol</NonProprietaryName>
    <DosageFormName>GEL</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20200615</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part333A</ApplicationNumber>
    <LabelerName>Ningbo Youcheng Trade Developing Co., Ltd.</LabelerName>
    <SubstanceName>ALCOHOL</SubstanceName>
    <StrengthNumber>75</StrengthNumber>
    <StrengthUnit>mL/100mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2022-01-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200616</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>hand sanitizer to help decrease bacteria on the skin that may cause disease.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>79432-000-01</NDCCode>
    <PackageDescription>48 PATCH in 1 PACKAGE (79432-000-01)  / 3.3 mL in 1 PATCH</PackageDescription>
    <NDC11Code>79432-0000-01</NDC11Code>
    <ProductNDC>79432-000</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Mediclean Sanitizing</ProprietaryName>
    <NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
    <DosageFormName>CLOTH</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20200720</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>505G(a)(3)</ApplicationNumber>
    <LabelerName>Industrias Maqu�n, S.A. de C.V.</LabelerName>
    <SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
    <StrengthNumber>1.3</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2026-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200720</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hand Sanitizer to help reduce bacteria on the skin.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>80701-000-01</NDCCode>
    <PackageDescription>25 PACKET in 1 BOX (80701-000-01)  &gt; 1.48 mL in 1 PACKET</PackageDescription>
    <NDC11Code>80701-0000-01</NDC11Code>
    <ProductNDC>80701-000</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Ifm Hand Sanitizer</ProprietaryName>
    <NonProprietaryName>Alcohol</NonProprietaryName>
    <DosageFormName>GEL</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20201101</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part333E</ApplicationNumber>
    <LabelerName>FSSC, LLC</LabelerName>
    <SubstanceName>ALCOHOL</SubstanceName>
    <StrengthNumber>.7</StrengthNumber>
    <StrengthUnit>mL/mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2022-01-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>to decrease bacteria on skin whenever soap and water is not readily available. recommended for repeated use.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>82716-000-50</NDCCode>
    <PackageDescription>50 PATCH in 1 POUCH (82716-000-50)  / 48 g in 1 PATCH</PackageDescription>
    <NDC11Code>82716-0000-50</NDC11Code>
    <ProductNDC>82716-000</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Nsi Sanitizing Wipes</ProprietaryName>
    <NonProprietaryName>Alcohol</NonProprietaryName>
    <DosageFormName>PATCH</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20220528</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>505G(a)(3)</ApplicationNumber>
    <LabelerName>NORTHERN SAFETY CO., INC.</LabelerName>
    <SubstanceName>ALCOHOL</SubstanceName>
    <StrengthNumber>75</StrengthNumber>
    <StrengthUnit>mL/g</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2023-10-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220528</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Helps reduce bacteria on the skin. Recommended for repeated use.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>0049-0420-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (0049-0420-10)  / 1 POWDER, FOR SOLUTION in 1 VIAL (0049-0420-05) </PackageDescription>
    <NDC11Code>00049-0420-10</NDC11Code>
    <ProductNDC>0049-0420</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pfizerpen</ProprietaryName>
    <NonProprietaryName>Penicillin G Potassium</NonProprietaryName>
    <DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAPLEURAL; INTRATHECAL; INTRAVENOUS</RouteName>
    <StartMarketingDate>20100601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA060657</ApplicationNumber>
    <LabelerName>Roerig</LabelerName>
    <SubstanceName>PENICILLIN G POTASSIUM</SubstanceName>
    <StrengthNumber>5000000</StrengthNumber>
    <StrengthUnit>[iU]/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-12-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180330</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Penicillin G Potassium for Injection is indicated in the treatment of serious infections caused by susceptible strains of the designated microorganisms in the conditions listed below. Appropriate culture and susceptibility tests should be done before treatment in order to isolate and identify organisms causing infection and to determine their susceptibility to penicillin G. Therapy with Penicillin G Potassium for Injection may be initiated before results of such tests are known when there is reason to believe the infection may involve any of the organisms listed below; however, once these results become available, appropriate therapy should be continued. To reduce the development of drug-resistant bacteria and maintain effectiveness of Penicillin G Potassium and other antibacterial drugs, Penicillin G Potassium should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Buffered Pfizerpen (Penicillin G Potassium for Injection, USP) is a sterile, pyrogen-free powder for reconstitution. Buffered Pfizerpen for Injection is an antibacterial agent for intramuscular, continuous intravenous infusion, intrapleural or other local infusion, and intrathecal administration. Each million units contains approximately 6.8 milligrams of sodium (0.3 mEq) and 65.6 milligrams of potassium (1.68 mEq). Buffered Pfizerpen (Penicillin G Potassium for Injection, USP) is supplied in vials equivalent to 5,000,000 units (5 million units) or 20,000,000 units (20 million units) of penicillin G as the potassium salt. Chemically, Pfizerpen is monopotassium 3,3-dimethyl-7-oxo-6-(2-phenylacetamido)-4-thia-1-azabicyclo (3.2.0) heptane-2-carboxylate. It has a molecular weight of 372.48 and the following chemical structure. Penicillin G potassium is a colorless or white crystal, or a white crystalline powder which is odorless, or practically so, and moderately hygroscopic. Penicillin G potassium is very soluble in water. The pH of the reconstituted product is between 6.0–8.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>0049-0430-20</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (0049-0430-20)  / 1 POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
    <NDC11Code>00049-0430-20</NDC11Code>
    <ProductNDC>0049-0430</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pfizerpen</ProprietaryName>
    <NonProprietaryName>Penicillin G Potassium</NonProprietaryName>
    <DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20100601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA060657</ApplicationNumber>
    <LabelerName>Roerig</LabelerName>
    <SubstanceName>PENICILLIN G POTASSIUM</SubstanceName>
    <StrengthNumber>20000000</StrengthNumber>
    <StrengthUnit>[iU]/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-12-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180330</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Penicillin G Potassium for Injection is indicated in the treatment of serious infections caused by susceptible strains of the designated microorganisms in the conditions listed below. Appropriate culture and susceptibility tests should be done before treatment in order to isolate and identify organisms causing infection and to determine their susceptibility to penicillin G. Therapy with Penicillin G Potassium for Injection may be initiated before results of such tests are known when there is reason to believe the infection may involve any of the organisms listed below; however, once these results become available, appropriate therapy should be continued. To reduce the development of drug-resistant bacteria and maintain effectiveness of Penicillin G Potassium and other antibacterial drugs, Penicillin G Potassium should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Buffered Pfizerpen (Penicillin G Potassium for Injection, USP) is a sterile, pyrogen-free powder for reconstitution. Buffered Pfizerpen for Injection is an antibacterial agent for intramuscular, continuous intravenous infusion, intrapleural or other local infusion, and intrathecal administration. Each million units contains approximately 6.8 milligrams of sodium (0.3 mEq) and 65.6 milligrams of potassium (1.68 mEq). Buffered Pfizerpen (Penicillin G Potassium for Injection, USP) is supplied in vials equivalent to 5,000,000 units (5 million units) or 20,000,000 units (20 million units) of penicillin G as the potassium salt. Chemically, Pfizerpen is monopotassium 3,3-dimethyl-7-oxo-6-(2-phenylacetamido)-4-thia-1-azabicyclo (3.2.0) heptane-2-carboxylate. It has a molecular weight of 372.48 and the following chemical structure. Penicillin G potassium is a colorless or white crystal, or a white crystalline powder which is odorless, or practically so, and moderately hygroscopic. Penicillin G potassium is very soluble in water. The pH of the reconstituted product is between 6.0–8.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>0049-0520-22</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (0049-0520-22)  / 1 POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
    <NDC11Code>00049-0520-22</NDC11Code>
    <ProductNDC>0049-0520</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pfizerpen</ProprietaryName>
    <NonProprietaryName>Penicillin G Potassium</NonProprietaryName>
    <DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAPLEURAL; INTRATHECAL; INTRAVENOUS</RouteName>
    <StartMarketingDate>20100601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA060657</ApplicationNumber>
    <LabelerName>Roerig</LabelerName>
    <SubstanceName>PENICILLIN G POTASSIUM</SubstanceName>
    <StrengthNumber>5000000</StrengthNumber>
    <StrengthUnit>[iU]/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Penicillin G Potassium for Injection is indicated in the treatment of serious infections caused by susceptible strains of the designated microorganisms in the conditions listed below. Appropriate culture and susceptibility tests should be done before treatment in order to isolate and identify organisms causing infection and to determine their susceptibility to penicillin G. Therapy with Penicillin G Potassium for Injection may be initiated before results of such tests are known when there is reason to believe the infection may involve any of the organisms listed below; however, once these results become available, appropriate therapy should be continued. To reduce the development of drug-resistant bacteria and maintain effectiveness of Penicillin G Potassium and other antibacterial drugs, Penicillin G Potassium should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Buffered Pfizerpen (Penicillin G Potassium for Injection, USP) is a sterile, pyrogen-free powder for reconstitution. Buffered Pfizerpen for Injection is an antibacterial agent for intramuscular, continuous intravenous infusion, intrapleural or other local infusion, and intrathecal administration. Each million units contains approximately 6.8 milligrams of sodium (0.3 mEq) and 65.6 milligrams of potassium (1.68 mEq). Buffered Pfizerpen (Penicillin G Potassium for Injection, USP) is supplied in vials equivalent to 5,000,000 units (5 million units) or 20,000,000 units (20 million units) of penicillin G as the potassium salt. Chemically, Pfizerpen is monopotassium 3,3-dimethyl-7-oxo-6-(2-phenylacetamido)-4-thia-1-azabicyclo (3.2.0) heptane-2-carboxylate. It has a molecular weight of 372.48 and the following chemical structure. Penicillin G potassium is a colorless or white crystal, or a white crystalline powder which is odorless, or practically so, and moderately hygroscopic. Penicillin G potassium is very soluble in water. The pH of the reconstituted product is between 6.0–8.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>0049-0520-83</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (0049-0520-83)  / 1 POWDER, FOR SOLUTION in 1 VIAL (0049-0520-84) </PackageDescription>
    <NDC11Code>00049-0520-83</NDC11Code>
    <ProductNDC>0049-0520</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pfizerpen</ProprietaryName>
    <NonProprietaryName>Penicillin G Potassium</NonProprietaryName>
    <DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAPLEURAL; INTRATHECAL; INTRAVENOUS</RouteName>
    <StartMarketingDate>20100601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA060657</ApplicationNumber>
    <LabelerName>Roerig</LabelerName>
    <SubstanceName>PENICILLIN G POTASSIUM</SubstanceName>
    <StrengthNumber>5000000</StrengthNumber>
    <StrengthUnit>[iU]/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-12-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Penicillin G Potassium for Injection is indicated in the treatment of serious infections caused by susceptible strains of the designated microorganisms in the conditions listed below. Appropriate culture and susceptibility tests should be done before treatment in order to isolate and identify organisms causing infection and to determine their susceptibility to penicillin G. Therapy with Penicillin G Potassium for Injection may be initiated before results of such tests are known when there is reason to believe the infection may involve any of the organisms listed below; however, once these results become available, appropriate therapy should be continued. To reduce the development of drug-resistant bacteria and maintain effectiveness of Penicillin G Potassium and other antibacterial drugs, Penicillin G Potassium should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Buffered Pfizerpen (Penicillin G Potassium for Injection, USP) is a sterile, pyrogen-free powder for reconstitution. Buffered Pfizerpen for Injection is an antibacterial agent for intramuscular, continuous intravenous infusion, intrapleural or other local infusion, and intrathecal administration. Each million units contains approximately 6.8 milligrams of sodium (0.3 mEq) and 65.6 milligrams of potassium (1.68 mEq). Buffered Pfizerpen (Penicillin G Potassium for Injection, USP) is supplied in vials equivalent to 5,000,000 units (5 million units) or 20,000,000 units (20 million units) of penicillin G as the potassium salt. Chemically, Pfizerpen is monopotassium 3,3-dimethyl-7-oxo-6-(2-phenylacetamido)-4-thia-1-azabicyclo (3.2.0) heptane-2-carboxylate. It has a molecular weight of 372.48 and the following chemical structure. Penicillin G potassium is a colorless or white crystal, or a white crystalline powder which is odorless, or practically so, and moderately hygroscopic. Penicillin G potassium is very soluble in water. The pH of the reconstituted product is between 6.0–8.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>0049-0530-22</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (0049-0530-22)  / 1 POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
    <NDC11Code>00049-0530-22</NDC11Code>
    <ProductNDC>0049-0530</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pfizerpen</ProprietaryName>
    <NonProprietaryName>Penicillin G Potassium</NonProprietaryName>
    <DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20100601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA060657</ApplicationNumber>
    <LabelerName>Roerig</LabelerName>
    <SubstanceName>PENICILLIN G POTASSIUM</SubstanceName>
    <StrengthNumber>20000000</StrengthNumber>
    <StrengthUnit>[iU]/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Penicillin G Potassium for Injection is indicated in the treatment of serious infections caused by susceptible strains of the designated microorganisms in the conditions listed below. Appropriate culture and susceptibility tests should be done before treatment in order to isolate and identify organisms causing infection and to determine their susceptibility to penicillin G. Therapy with Penicillin G Potassium for Injection may be initiated before results of such tests are known when there is reason to believe the infection may involve any of the organisms listed below; however, once these results become available, appropriate therapy should be continued. To reduce the development of drug-resistant bacteria and maintain effectiveness of Penicillin G Potassium and other antibacterial drugs, Penicillin G Potassium should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Buffered Pfizerpen (Penicillin G Potassium for Injection, USP) is a sterile, pyrogen-free powder for reconstitution. Buffered Pfizerpen for Injection is an antibacterial agent for intramuscular, continuous intravenous infusion, intrapleural or other local infusion, and intrathecal administration. Each million units contains approximately 6.8 milligrams of sodium (0.3 mEq) and 65.6 milligrams of potassium (1.68 mEq). Buffered Pfizerpen (Penicillin G Potassium for Injection, USP) is supplied in vials equivalent to 5,000,000 units (5 million units) or 20,000,000 units (20 million units) of penicillin G as the potassium salt. Chemically, Pfizerpen is monopotassium 3,3-dimethyl-7-oxo-6-(2-phenylacetamido)-4-thia-1-azabicyclo (3.2.0) heptane-2-carboxylate. It has a molecular weight of 372.48 and the following chemical structure. Penicillin G potassium is a colorless or white crystal, or a white crystalline powder which is odorless, or practically so, and moderately hygroscopic. Penicillin G potassium is very soluble in water. The pH of the reconstituted product is between 6.0–8.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>0049-0530-28</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (0049-0530-28)  / 1 POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
    <NDC11Code>00049-0530-28</NDC11Code>
    <ProductNDC>0049-0530</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pfizerpen</ProprietaryName>
    <NonProprietaryName>Penicillin G Potassium</NonProprietaryName>
    <DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20100601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA060657</ApplicationNumber>
    <LabelerName>Roerig</LabelerName>
    <SubstanceName>PENICILLIN G POTASSIUM</SubstanceName>
    <StrengthNumber>20000000</StrengthNumber>
    <StrengthUnit>[iU]/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-12-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Penicillin G Potassium for Injection is indicated in the treatment of serious infections caused by susceptible strains of the designated microorganisms in the conditions listed below. Appropriate culture and susceptibility tests should be done before treatment in order to isolate and identify organisms causing infection and to determine their susceptibility to penicillin G. Therapy with Penicillin G Potassium for Injection may be initiated before results of such tests are known when there is reason to believe the infection may involve any of the organisms listed below; however, once these results become available, appropriate therapy should be continued. To reduce the development of drug-resistant bacteria and maintain effectiveness of Penicillin G Potassium and other antibacterial drugs, Penicillin G Potassium should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Buffered Pfizerpen (Penicillin G Potassium for Injection, USP) is a sterile, pyrogen-free powder for reconstitution. Buffered Pfizerpen for Injection is an antibacterial agent for intramuscular, continuous intravenous infusion, intrapleural or other local infusion, and intrathecal administration. Each million units contains approximately 6.8 milligrams of sodium (0.3 mEq) and 65.6 milligrams of potassium (1.68 mEq). Buffered Pfizerpen (Penicillin G Potassium for Injection, USP) is supplied in vials equivalent to 5,000,000 units (5 million units) or 20,000,000 units (20 million units) of penicillin G as the potassium salt. Chemically, Pfizerpen is monopotassium 3,3-dimethyl-7-oxo-6-(2-phenylacetamido)-4-thia-1-azabicyclo (3.2.0) heptane-2-carboxylate. It has a molecular weight of 372.48 and the following chemical structure. Penicillin G potassium is a colorless or white crystal, or a white crystalline powder which is odorless, or practically so, and moderately hygroscopic. Penicillin G potassium is very soluble in water. The pH of the reconstituted product is between 6.0–8.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>0069-0195-02</NDCCode>
    <PackageDescription>10 SYRINGE in 1 CARTON (0069-0195-02)  / .2 mL in 1 SYRINGE (0069-0195-01) </PackageDescription>
    <NDC11Code>00069-0195-02</NDC11Code>
    <ProductNDC>0069-0195</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fragmin</ProprietaryName>
    <NonProprietaryName>Dalteparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20150401</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020287</ApplicationNumber>
    <LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
    <SubstanceName>DALTEPARIN SODIUM</SubstanceName>
    <StrengthNumber>2500</StrengthNumber>
    <StrengthUnit>[iU]/.2mL</StrengthUnit>
    <Pharm_Classes>Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-10-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150401</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).</IndicationAndUsage>
    <Description>FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula.</Description>
  </NDC>
  <NDC>
    <NDCCode>0069-0196-02</NDCCode>
    <PackageDescription>10 SYRINGE in 1 CARTON (0069-0196-02)  / .2 mL in 1 SYRINGE (0069-0196-01) </PackageDescription>
    <NDC11Code>00069-0196-02</NDC11Code>
    <ProductNDC>0069-0196</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fragmin</ProprietaryName>
    <NonProprietaryName>Dalteparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20150401</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020287</ApplicationNumber>
    <LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
    <SubstanceName>DALTEPARIN SODIUM</SubstanceName>
    <StrengthNumber>5000</StrengthNumber>
    <StrengthUnit>[iU]/.2mL</StrengthUnit>
    <Pharm_Classes>Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-10-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150401</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).</IndicationAndUsage>
    <Description>FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula.</Description>
  </NDC>
  <NDC>
    <NDCCode>0069-0206-02</NDCCode>
    <PackageDescription>10 SYRINGE in 1 CARTON (0069-0206-02)  / .3 mL in 1 SYRINGE (0069-0206-01) </PackageDescription>
    <NDC11Code>00069-0206-02</NDC11Code>
    <ProductNDC>0069-0206</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fragmin</ProprietaryName>
    <NonProprietaryName>Dalteparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20150401</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020287</ApplicationNumber>
    <LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
    <SubstanceName>DALTEPARIN SODIUM</SubstanceName>
    <StrengthNumber>7500</StrengthNumber>
    <StrengthUnit>[iU]/.3mL</StrengthUnit>
    <Pharm_Classes>Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-10-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150401</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).</IndicationAndUsage>
    <Description>FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula.</Description>
  </NDC>
  <NDC>
    <NDCCode>0069-0217-02</NDCCode>
    <PackageDescription>10 SYRINGE in 1 CARTON (0069-0217-02)  / 1 mL in 1 SYRINGE (0069-0217-01) </PackageDescription>
    <NDC11Code>00069-0217-02</NDC11Code>
    <ProductNDC>0069-0217</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fragmin</ProprietaryName>
    <NonProprietaryName>Dalteparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20150401</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020287</ApplicationNumber>
    <LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
    <SubstanceName>DALTEPARIN SODIUM</SubstanceName>
    <StrengthNumber>10000</StrengthNumber>
    <StrengthUnit>[iU]/mL</StrengthUnit>
    <Pharm_Classes>Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-10-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150401</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).</IndicationAndUsage>
    <Description>FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula.</Description>
  </NDC>
  <NDC>
    <NDCCode>0069-0220-02</NDCCode>
    <PackageDescription>10 SYRINGE in 1 CARTON (0069-0220-02)  / .5 mL in 1 SYRINGE (0069-0220-01) </PackageDescription>
    <NDC11Code>00069-0220-02</NDC11Code>
    <ProductNDC>0069-0220</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fragmin</ProprietaryName>
    <NonProprietaryName>Dalteparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20150401</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020287</ApplicationNumber>
    <LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
    <SubstanceName>DALTEPARIN SODIUM</SubstanceName>
    <StrengthNumber>12500</StrengthNumber>
    <StrengthUnit>[iU]/.5mL</StrengthUnit>
    <Pharm_Classes>Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-10-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150401</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).</IndicationAndUsage>
    <Description>FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula.</Description>
  </NDC>
  <NDC>
    <NDCCode>0069-0223-02</NDCCode>
    <PackageDescription>10 SYRINGE in 1 CARTON (0069-0223-02)  / .6 mL in 1 SYRINGE (0069-0223-01) </PackageDescription>
    <NDC11Code>00069-0223-02</NDC11Code>
    <ProductNDC>0069-0223</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fragmin</ProprietaryName>
    <NonProprietaryName>Dalteparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20150401</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020287</ApplicationNumber>
    <LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
    <SubstanceName>DALTEPARIN SODIUM</SubstanceName>
    <StrengthNumber>15000</StrengthNumber>
    <StrengthUnit>[iU]/.6mL</StrengthUnit>
    <Pharm_Classes>Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-10-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150401</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).</IndicationAndUsage>
    <Description>FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula.</Description>
  </NDC>
  <NDC>
    <NDCCode>0069-0228-02</NDCCode>
    <PackageDescription>10 SYRINGE in 1 CARTON (0069-0228-02)  / .72 mL in 1 SYRINGE (0069-0228-01) </PackageDescription>
    <NDC11Code>00069-0228-02</NDC11Code>
    <ProductNDC>0069-0228</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fragmin</ProprietaryName>
    <NonProprietaryName>Dalteparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20150401</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020287</ApplicationNumber>
    <LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
    <SubstanceName>DALTEPARIN SODIUM</SubstanceName>
    <StrengthNumber>18000</StrengthNumber>
    <StrengthUnit>[iU]/.72mL</StrengthUnit>
    <Pharm_Classes>Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-10-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150401</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).</IndicationAndUsage>
    <Description>FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula.</Description>
  </NDC>
  <NDC>
    <NDCCode>0069-0232-01</NDCCode>
    <PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0069-0232-01)  / 3.8 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
    <NDC11Code>00069-0232-01</NDC11Code>
    <ProductNDC>0069-0232</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fragmin</ProprietaryName>
    <NonProprietaryName>Dalteparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20150401</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020287</ApplicationNumber>
    <LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
    <SubstanceName>DALTEPARIN SODIUM</SubstanceName>
    <StrengthNumber>25000</StrengthNumber>
    <StrengthUnit>[iU]/mL</StrengthUnit>
    <Pharm_Classes>Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-10-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150401</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).</IndicationAndUsage>
    <Description>FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula.</Description>
  </NDC>
  <NDC>
    <NDCCode>0069-0253-10</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (0069-0253-10)  / 4 mL in 1 VIAL, SINGLE-DOSE (0069-0253-01) </PackageDescription>
    <NDC11Code>00069-0253-10</NDC11Code>
    <ProductNDC>0069-0253</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fragmin</ProprietaryName>
    <NonProprietaryName>Dalteparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20221017</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020287</ApplicationNumber>
    <LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
    <SubstanceName>DALTEPARIN SODIUM</SubstanceName>
    <StrengthNumber>2500</StrengthNumber>
    <StrengthUnit>[iU]/mL</StrengthUnit>
    <Pharm_Classes>Anti-coagulant [EPC], Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-10-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221017</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>FRAGMIN is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (1.1), 2 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery or medical patients with severely restricted mobility during acute illness (1.2), 3 Extended treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in adult patients with cancer. In these patients, the FRAGMIN therapy begins with the initial VTE treatment and continues for six months (1.3), 4 Treatment of symptomatic venous thromboembolism (VTE) to reduce the recurrence in pediatric patients from birth (gestational age at least 35 weeks) (1.4), 5 Limitations of UseFRAGMIN is not indicated for the acute treatment of VTE (1.5).</IndicationAndUsage>
    <Description>FRAGMIN Injection (dalteparin sodium injection) is a sterile, low molecular weight heparin. It is available in single-dose, prefilled syringes preassembled with a needle guard device, and multiple-dose vials. With reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard, each syringe contains either 2,500 units, 5,000 units, 7,500 units, 10,000 units, 12,500 units, 15,000 units or 18,000 anti-Xa international units (units), equivalent to 16 mg, 32 mg, 48 mg, 64 mg, 80 mg, 96 mg or 115.2 mg dalteparin sodium, respectively. Each multiple-dose vial contains 25,000 anti-Xa units per 1 mL (equivalent to 160 mg dalteparin sodium), for a total of 95,000 anti-Xa units per vial. Each single-dose vial contains 2,500 anti-Xa units per 1 mL (equivalent to 16 mg dalteparin sodium) for a total of 10,000 anti-Xa units per vial. Each prefilled syringe also contains Water for Injection and sodium chloride, when required, to maintain physiologic ionic strength. The prefilled syringes are preservative-free. Each multiple-dose vial also contains Water for Injection and 14 mg of benzyl alcohol per mL as a preservative. The pH of both formulations is 5.0 to 7.5. When necessary, the pH of FRAGMIN is adjusted with hydrochloric acid and/or sodium hydroxide [see Dosage and Administration (2.7) and How Supplied/Storage and Handling (16)]. Dalteparin sodium is produced through controlled nitrous acid depolymerization of sodium heparin from porcine intestinal mucosa followed by a chromatographic purification process. It is composed of strongly acidic sulfated polysaccharide chains (oligosaccharide, containing 2,5-anhydro-D-mannitol residues as end groups) with an average molecular weight of 5,000 and about 90% of the material within the range 2,000–9,000. The molecular weight distribution is. Structural Formula.</Description>
  </NDC>
  <NDC>
    <NDCCode>0074-3173-90</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE (0074-3173-90) </PackageDescription>
    <NDC11Code>00074-3173-90</NDC11Code>
    <ProductNDC>0074-3173</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tricor</ProprietaryName>
    <NonProprietaryName>Fenofibrate</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20160205</StartMarketingDate>
    <EndMarketingDate>20251130</EndMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021656</ApplicationNumber>
    <LabelerName>AbbVie Inc.</LabelerName>
    <SubstanceName>FENOFIBRATE</SubstanceName>
    <StrengthNumber>48</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Peroxisome Proliferator Receptor alpha Agonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-12-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20160205</StartMarketingDatePackage>
    <EndMarketingDatePackage>20251130</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>TRICOR is indicated as adjunctive therapy to diet.  to reduce triglyceride (TG) levels in adults with severe hypertriglyceridemia (TG greater than or equal to 500 mg/dL).  to reduce elevated low-density lipoprotein cholesterol (LDL-C) in adults with primary hyperlipidemia when use of recommended LDL-C lowering therapy is not possible. Limitations of Use.  Markedly elevated levels of serum TG (e.g. &gt; 2,000 mg/dL) may increase the risk of developing pancreatitis. The effect of fenofibrate therapy on reducing this risk has not been determined [see Warnings and Precautions (5.7)].  Fenofibrate did not reduce coronary heart disease morbidity and mortality in two large, randomized controlled trials of patients with type 2 diabetes mellitus [see Warnings and Precautions (5.1) and Clinical Studies (14.4)].</IndicationAndUsage>
    <Description>TRICOR (fenofibrate) tablets is a peroxisome proliferator-activated receptor (PPAR) alpha agonist available as tablets for oral administration. Each tablet contains 48 mg or 145 mg of fenofibrate. The chemical name for fenofibrate is 2-[4-(4-chlorobenzoyl) phenoxy]-2-methyl-propanoic acid, 1-methylethyl ester with the following structural formula:. The empirical formula is C20H21O4Cl and the molecular weight is 360.83; fenofibrate is insoluble in water. The melting point is 79 to 82°C. Fenofibrate is a white solid which is stable under ordinary conditions. Inactive Ingredients. Each tablet contains crospovidone, docusate sodium, hypromellose 2910 (3 cps), lactose monohydrate, magnesium stearate, silicified microcrystalline cellulose, sodium lauryl sulfate, and sucrose. In addition, individual tablets contain:. 48 mg tablets. D&amp;C Yellow #10 aluminum lake, FD&amp;C Yellow #6 /sunset yellow FCF aluminum lake, FD&amp;C Blue #2 /indigo carmine aluminum lake, polyvinyl alcohol, soybean lecithin, talc, titanium dioxide, xanthan gum. 145 mg tablets. polyvinyl alcohol, soybean lecithin, talc, titanium dioxide, xanthan gum.</Description>
  </NDC>
  <NDC>
    <NDCCode>0074-3189-90</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE (0074-3189-90) </PackageDescription>
    <NDC11Code>00074-3189-90</NDC11Code>
    <ProductNDC>0074-3189</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tricor</ProprietaryName>
    <NonProprietaryName>Fenofibrate</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20160205</StartMarketingDate>
    <EndMarketingDate>20260330</EndMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021656</ApplicationNumber>
    <LabelerName>AbbVie Inc.</LabelerName>
    <SubstanceName>FENOFIBRATE</SubstanceName>
    <StrengthNumber>145</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Peroxisome Proliferator Receptor alpha Agonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-03-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20160205</StartMarketingDatePackage>
    <EndMarketingDatePackage>20260330</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>TRICOR is indicated as adjunctive therapy to diet.  to reduce triglyceride (TG) levels in adults with severe hypertriglyceridemia (TG greater than or equal to 500 mg/dL).  to reduce elevated low-density lipoprotein cholesterol (LDL-C) in adults with primary hyperlipidemia when use of recommended LDL-C lowering therapy is not possible. Limitations of Use.  Markedly elevated levels of serum TG (e.g. &gt; 2,000 mg/dL) may increase the risk of developing pancreatitis. The effect of fenofibrate therapy on reducing this risk has not been determined [see Warnings and Precautions (5.7)].  Fenofibrate did not reduce coronary heart disease morbidity and mortality in two large, randomized controlled trials of patients with type 2 diabetes mellitus [see Warnings and Precautions (5.1) and Clinical Studies (14.4)].</IndicationAndUsage>
    <Description>TRICOR (fenofibrate) tablets is a peroxisome proliferator-activated receptor (PPAR) alpha agonist available as tablets for oral administration. Each tablet contains 48 mg or 145 mg of fenofibrate. The chemical name for fenofibrate is 2-[4-(4-chlorobenzoyl) phenoxy]-2-methyl-propanoic acid, 1-methylethyl ester with the following structural formula:. The empirical formula is C20H21O4Cl and the molecular weight is 360.83; fenofibrate is insoluble in water. The melting point is 79 to 82°C. Fenofibrate is a white solid which is stable under ordinary conditions. Inactive Ingredients. Each tablet contains crospovidone, docusate sodium, hypromellose 2910 (3 cps), lactose monohydrate, magnesium stearate, silicified microcrystalline cellulose, sodium lauryl sulfate, and sucrose. In addition, individual tablets contain:. 48 mg tablets. D&amp;C Yellow #10 aluminum lake, FD&amp;C Yellow #6 /sunset yellow FCF aluminum lake, FD&amp;C Blue #2 /indigo carmine aluminum lake, polyvinyl alcohol, soybean lecithin, talc, titanium dioxide, xanthan gum. 145 mg tablets. polyvinyl alcohol, soybean lecithin, talc, titanium dioxide, xanthan gum.</Description>
  </NDC>
  <NDC>
    <NDCCode>0440-2055-40</NDCCode>
    <PackageDescription>40 TABLET in 1 BOTTLE, PLASTIC (0440-2055-40)</PackageDescription>
    <NDC11Code>00440-2055-40</NDC11Code>
    <ProductNDC>0440-2055</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Penicillin V Potassium</ProprietaryName>
    <NonProprietaryName>Penicillin V Potassium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20040201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062936</ApplicationNumber>
    <LabelerName>Liberty Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>PENICILLIN V POTASSIUM</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Penicillins [CS],Penicillin-class Antibacterial [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of Penicillin V Potassium Tablets, Penicillin V Potassium for Oral Solution and other antibacterial drugs, Penicillin V Potassium Tablets, and Penicillin V Potassium for Oral Solution should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antimicrobial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Penicillin V Potassium Tablets, USP and Penicillin V Potassium for Oral Solution, USP, are indicated in the treatment of mild to moderately severe infections due to penicillin G sensitive microorganisms. Therapy should be guided by bacteriological studies (including sensitivity tests) and by clinical response. NOTE: Severe pneumonia, empyema, bacteremia, pericarditis, meningitis, and arthritis should not be treated with penicillin V during the acute stage. Indicated surgical procedures should be performed. The following Infections will usually respond to adequate dosage of Penicillin V. Streptococcal infections (without bacteremia): Mild to moderate infections of the upper respiratory tract, scarlet fever and mild erysipelas. NOTE: Streptococci in groups A, C, G, H, L, and M are very sensitive to penicillin. Other groups, including group D (enterococcus) are resistant. Pneumococcal infections: Mild to moderately severe infections of the respiratory tract. Staphylococcal infections - penicillin G sensitive: Mild infections of the skin and soft tissues. NOTE: Reports indicate an increasing number of strains of staphylococci resistant to penicillin G, emphasizing the need for culture and sensitivity studies in treating suspected staphylococcal infections. Fusospirochetosis (Vincent's gingivitis and pharyngitis): Mild to moderately severe infections of the oropharynx usually respond to therapy with oral penicillin. NOTE: Necessary dental care should be accomplished in infections involving the gum tissue. Medical conditions in which oral penicillin therapy is indicated as prophylaxis. For the prevention of recurrence following rheumatic fever and/or chorea: Prophylaxis with oral penicillin on a continuing basis has proven effective in preventing recurrence of these conditions. Although no controlled clinical efficacy studies have been conducted, penicillin V has been suggested by the American Heart Association and the American Dental Association for use as an oral regimen for prophylaxis against bacterial endocarditis in patients with congenital heart disease or rheumatic or other acquired valvular heart disease when they undergo dental procedures and surgical procedures of the upper respiratory tract.1 Oral penicillin should not be used in those patients at particularly high risk for endocarditis (e.g. those with prosthetic heart valves or surgically constructed systemic pulmonary shunts). Penicillin V should not be used as adjunctive prophylaxis for genitourinary instrumentation or surgery, lower-intestinal tract surgery, sigmoidoscopy, and childbirth. Since it may happen that alpha haemolytic streptococci relatively resistant to penicillin may be found when patients are receiving continuous oral penicillin for secondary prevention of rheumatic fever, prophylactic agents, other than penicillin may be chosen for these patients and prescribed in addition to their continuous rheumatic fever prophylactic regimen. NOTE: When selecting antibiotics for the prevention of bacterial endocarditis, the physician or dentist should read the full joint statement of the American Heart Association and the American Dental Association.1.</IndicationAndUsage>
    <Description>Penicillin V is the phenoxymethyl analog of penicillin G. Penicillin V potassium is the potassium salt of penicillin V. Penicillin V Potassium is designated chemically as 4-Thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, 3,3-dimethyl-7-oxo- 6-[(phenoxyacetyl)amino]-, monopotassium salt, [2S-(2α,5α,6β)]-. It has the following chemical structure. The molecular formula is C16H17KN2O5S, and the molecular weight is 388.48. Each tablet contains Penicillin V Potassium equivalent to 250 mg or 500 mg (400,000 or 800,000 units) of penicillin V. Each Penicillin V Potassium tablet, USP, 250 mg contains 0.73 mEq (28.2 mg) of Potassium and each Penicillin V potassium tablet, USP, 500 mg contains 1.46 mEq (56.4 mg) of Potassium. Each tablet also contains the following inactive ingredients: lactose, NF; magnesium stearate, NF; microcrystalline cellulose, NF; polyethylene glycol, NF; povidone, USP; sodium laurel sulfate, NF. Each 5 mL when reconstituted as directed contains Penicillin V Potassium equivalent to 125 mg or 250 mg (200,000 or 400,000 units) of Penicillin V. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP,125 mg per 5 mL contains 0.42 mEq (16.4 mg) of Potassium. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 250 mg per 5 mL contains 0.85 mEq (32.8 mg) of Potassium. Each 5 mL of reconstituted suspension also contains the following inactive ingredients: aspartame, NF; citric acid, USP; FD&amp;C Red No. 40; flavors; primary taste modifier; saccharin sodium, USP; silicon dioxide, NF; sodium citrate, USP; sodium propionate, NF; sucrose, NF.</Description>
  </NDC>
  <NDC>
    <NDCCode>0440-8055-40</NDCCode>
    <PackageDescription>40 TABLET in 1 BOTTLE, PLASTIC (0440-8055-40)</PackageDescription>
    <NDC11Code>00440-8055-40</NDC11Code>
    <ProductNDC>0440-8055</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Penicillin V Potassium</ProprietaryName>
    <NonProprietaryName>Penicillin V Potassium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20040201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062936</ApplicationNumber>
    <LabelerName>Liberty Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>PENICILLIN V POTASSIUM</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Penicillins [CS],Penicillin-class Antibacterial [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of Penicillin V Potassium Tablets, Penicillin V Potassium for Oral Solution and other antibacterial drugs, Penicillin V Potassium Tablets, and Penicillin V Potassium for Oral Solution should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antimicrobial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Penicillin V Potassium Tablets, USP and Penicillin V Potassium for Oral Solution, USP, are indicated in the treatment of mild to moderately severe infections due to penicillin G sensitive microorganisms. Therapy should be guided by bacteriological studies (including sensitivity tests) and by clinical response. NOTE: Severe pneumonia, empyema, bacteremia, pericarditis, meningitis, and arthritis should not be treated with penicillin V during the acute stage. Indicated surgical procedures should be performed. The following Infections will usually respond to adequate dosage of Penicillin V. Streptococcal infections (without bacteremia): Mild to moderate infections of the upper respiratory tract, scarlet fever and mild erysipelas. NOTE: Streptococci in groups A, C, G, H, L, and M are very sensitive to penicillin. Other groups, including group D (enterococcus) are resistant. Pneumococcal infections: Mild to moderately severe infections of the respiratory tract. Staphylococcal infections - penicillin G sensitive: Mild infections of the skin and soft tissues. NOTE: Reports indicate an increasing number of strains of staphylococci resistant to penicillin G, emphasizing the need for culture and sensitivity studies in treating suspected staphylococcal infections. Fusospirochetosis (Vincent's gingivitis and pharyngitis): Mild to moderately severe infections of the oropharynx usually respond to therapy with oral penicillin. NOTE: Necessary dental care should be accomplished in infections involving the gum tissue. Medical conditions in which oral penicillin therapy is indicated as prophylaxis. For the prevention of recurrence following rheumatic fever and/or chorea: Prophylaxis with oral penicillin on a continuing basis has proven effective in preventing recurrence of these conditions. Although no controlled clinical efficacy studies have been conducted, penicillin V has been suggested by the American Heart Association and the American Dental Association for use as an oral regimen for prophylaxis against bacterial endocarditis in patients with congenital heart disease or rheumatic or other acquired valvular heart disease when they undergo dental procedures and surgical procedures of the upper respiratory tract.1 Oral penicillin should not be used in those patients at particularly high risk for endocarditis (e.g. those with prosthetic heart valves or surgically constructed systemic pulmonary shunts). Penicillin V should not be used as adjunctive prophylaxis for genitourinary instrumentation or surgery, lower-intestinal tract surgery, sigmoidoscopy, and childbirth. Since it may happen that alpha haemolytic streptococci relatively resistant to penicillin may be found when patients are receiving continuous oral penicillin for secondary prevention of rheumatic fever, prophylactic agents, other than penicillin may be chosen for these patients and prescribed in addition to their continuous rheumatic fever prophylactic regimen. NOTE: When selecting antibiotics for the prevention of bacterial endocarditis, the physician or dentist should read the full joint statement of the American Heart Association and the American Dental Association.1.</IndicationAndUsage>
    <Description>Penicillin V is the phenoxymethyl analog of penicillin G. Penicillin V potassium is the potassium salt of penicillin V. Penicillin V Potassium is designated chemically as 4-Thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, 3,3-dimethyl-7-oxo- 6-[(phenoxyacetyl)amino]-, monopotassium salt, [2S-(2α,5α,6β)]-. It has the following chemical structure. The molecular formula is C16H17KN2O5S, and the molecular weight is 388.48. Each tablet contains Penicillin V Potassium equivalent to 250 mg or 500 mg (400,000 or 800,000 units) of penicillin V. Each Penicillin V Potassium tablet, USP, 250 mg contains 0.73 mEq (28.2 mg) of Potassium and each Penicillin V potassium tablet, USP, 500 mg contains 1.46 mEq (56.4 mg) of Potassium. Each tablet also contains the following inactive ingredients: lactose, NF; magnesium stearate, NF; microcrystalline cellulose, NF; polyethylene glycol, NF; povidone, USP; sodium laurel sulfate, NF. Each 5 mL when reconstituted as directed contains Penicillin V Potassium equivalent to 125 mg or 250 mg (200,000 or 400,000 units) of Penicillin V. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP,125 mg per 5 mL contains 0.42 mEq (16.4 mg) of Potassium. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 250 mg per 5 mL contains 0.85 mEq (32.8 mg) of Potassium. Each 5 mL of reconstituted suspension also contains the following inactive ingredients: aspartame, NF; citric acid, USP; FD&amp;C Red No. 40; flavors; primary taste modifier; saccharin sodium, USP; silicon dioxide, NF; sodium citrate, USP; sodium propionate, NF; sucrose, NF.</Description>
  </NDC>
  <NDC>
    <NDCCode>0440-8056-40</NDCCode>
    <PackageDescription>40 TABLET in 1 BOTTLE, PLASTIC (0440-8056-40)</PackageDescription>
    <NDC11Code>00440-8056-40</NDC11Code>
    <ProductNDC>0440-8056</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Penicillin V Potassium</ProprietaryName>
    <NonProprietaryName>Penicillin V Potassium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20040201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062935</ApplicationNumber>
    <LabelerName>Liberty Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>PENICILLIN V POTASSIUM</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Penicillins [CS],Penicillin-class Antibacterial [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of Penicillin V Potassium Tablets, Penicillin V Potassium for Oral Solution and other antibacterial drugs, Penicillin V Potassium Tablets, and Penicillin V Potassium for Oral Solution should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antimicrobial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Penicillin V Potassium Tablets, USP and Penicillin V Potassium for Oral Solution, USP, are indicated in the treatment of mild to moderately severe infections due to penicillin G sensitive microorganisms. Therapy should be guided by bacteriological studies (including sensitivity tests) and by clinical response. NOTE: Severe pneumonia, empyema, bacteremia, pericarditis, meningitis, and arthritis should not be treated with penicillin V during the acute stage. Indicated surgical procedures should be performed. The following Infections will usually respond to adequate dosage of Penicillin V. Streptococcal infections (without bacteremia): Mild to moderate infections of the upper respiratory tract, scarlet fever and mild erysipelas. NOTE: Streptococci in groups A, C, G, H, L, and M are very sensitive to penicillin. Other groups, including group D (enterococcus) are resistant. Pneumococcal infections: Mild to moderately severe infections of the respiratory tract. Staphylococcal infections - penicillin G sensitive: Mild infections of the skin and soft tissues. NOTE: Reports indicate an increasing number of strains of staphylococci resistant to penicillin G, emphasizing the need for culture and sensitivity studies in treating suspected staphylococcal infections. Fusospirochetosis (Vincent's gingivitis and pharyngitis): Mild to moderately severe infections of the oropharynx usually respond to therapy with oral penicillin. NOTE: Necessary dental care should be accomplished in infections involving the gum tissue. Medical conditions in which oral penicillin therapy is indicated as prophylaxis. For the prevention of recurrence following rheumatic fever and/or chorea: Prophylaxis with oral penicillin on a continuing basis has proven effective in preventing recurrence of these conditions. Although no controlled clinical efficacy studies have been conducted, penicillin V has been suggested by the American Heart Association and the American Dental Association for use as an oral regimen for prophylaxis against bacterial endocarditis in patients with congenital heart disease or rheumatic or other acquired valvular heart disease when they undergo dental procedures and surgical procedures of the upper respiratory tract.1 Oral penicillin should not be used in those patients at particularly high risk for endocarditis (e.g. those with prosthetic heart valves or surgically constructed systemic pulmonary shunts). Penicillin V should not be used as adjunctive prophylaxis for genitourinary instrumentation or surgery, lower-intestinal tract surgery, sigmoidoscopy, and childbirth. Since it may happen that alpha haemolytic streptococci relatively resistant to penicillin may be found when patients are receiving continuous oral penicillin for secondary prevention of rheumatic fever, prophylactic agents, other than penicillin may be chosen for these patients and prescribed in addition to their continuous rheumatic fever prophylactic regimen. NOTE: When selecting antibiotics for the prevention of bacterial endocarditis, the physician or dentist should read the full joint statement of the American Heart Association and the American Dental Association.1.</IndicationAndUsage>
    <Description>Penicillin V is the phenoxymethyl analog of penicillin G. Penicillin V potassium is the potassium salt of penicillin V. Penicillin V Potassium is designated chemically as 4-Thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, 3,3-dimethyl-7-oxo- 6-[(phenoxyacetyl)amino]-, monopotassium salt, [2S-(2α,5α,6β)]-. It has the following chemical structure. The molecular formula is C16H17KN2O5S, and the molecular weight is 388.48. Each tablet contains Penicillin V Potassium equivalent to 250 mg or 500 mg (400,000 or 800,000 units) of penicillin V. Each Penicillin V Potassium tablet, USP, 250 mg contains 0.73 mEq (28.2 mg) of Potassium and each Penicillin V potassium tablet, USP, 500 mg contains 1.46 mEq (56.4 mg) of Potassium. Each tablet also contains the following inactive ingredients: lactose, NF; magnesium stearate, NF; microcrystalline cellulose, NF; polyethylene glycol, NF; povidone, USP; sodium laurel sulfate, NF. Each 5 mL when reconstituted as directed contains Penicillin V Potassium equivalent to 125 mg or 250 mg (200,000 or 400,000 units) of Penicillin V. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP,125 mg per 5 mL contains 0.42 mEq (16.4 mg) of Potassium. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 250 mg per 5 mL contains 0.85 mEq (32.8 mg) of Potassium. Each 5 mL of reconstituted suspension also contains the following inactive ingredients: aspartame, NF; citric acid, USP; FD&amp;C Red No. 40; flavors; primary taste modifier; saccharin sodium, USP; silicon dioxide, NF; sodium citrate, USP; sodium propionate, NF; sucrose, NF.</Description>
  </NDC>
  <NDC>
    <NDCCode>0781-6135-95</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (0781-6135-95)  &gt; 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (0781-6135-94) </PackageDescription>
    <NDC11Code>00781-6135-95</NDC11Code>
    <ProductNDC>0781-6135</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Penicillin G Potassium</ProprietaryName>
    <NonProprietaryName>Penicillin G Potassium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20010830</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065079</ApplicationNumber>
    <LabelerName>Sandoz Inc</LabelerName>
    <SubstanceName>PENICILLIN G POTASSIUM</SubstanceName>
    <StrengthNumber>5000000</StrengthNumber>
    <StrengthUnit>[iU]/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2020-11-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20010830</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Buffered penicillin G potassium for injection is indicated in the treatment of serious infections caused by susceptible strains of the designated microorganisms in the conditions listed below. Appropriate culture and susceptibility tests should be done before treatment in order to isolate and identify organisms causing infection and to determine their susceptibility to penicillin G. Therapy with Buffered penicillin G potassium for injection may be initiated before results of such tests are known when there is reason to believe the infection may involve any of the organisms listed below, however, once these results become available, appropriate therapy should be continued. To reduce the development of drug-resistant bacteria and maintain the effectiveness of penicillin G potassium and other antibacterial drugs, penicillin G potassium should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Buffered penicillin G potassium for injection, USP is sterile penicillin G potassium powder for reconstitution. It is an antibacterial agent intended for intravenous or intramuscularly use. Chemically, penicillin G potassium is monopotassium (2S,5R,6R)-3,3-dimethyl-7-oxo-6-(2-phenylacetamido)-4-thia-1-azabicyclo (3.2.0) heptane-2-carboxylate, and has the following chemical structure. Molecular Formula: C16H17KN2O4S. Molecular Weight: 372.48. Penicillin G potassium, a water soluble benzylpenicillin, is a white to almost white crystalline powder which is almost odorless and/or after reconstitution a colorless solution. The pH of freshly constituted solutions usually ranges from 6 to 8.5. Sodium citrate and citric acid have been added as a buffer. Buffered penicillin G potassium for injection, USP is supplied in vials equivalent to 1,000,000 units (1 million units), 5,000,000 units (5 million units), or 20,000,000 units (20 million units) of penicillin G as the potassium salt. Each million unit contains approximately 7.9 milligrams of sodium (0.34 mEq) and 65.6 milligrams of potassium (1.68 mEq).</Description>
  </NDC>
  <NDC>
    <NDCCode>0781-6136-94</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (0781-6136-94)  &gt; 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
    <NDC11Code>00781-6136-94</NDC11Code>
    <ProductNDC>0781-6136</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Penicillin G Potassium</ProprietaryName>
    <NonProprietaryName>Penicillin G Potassium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20010830</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065079</ApplicationNumber>
    <LabelerName>Sandoz Inc</LabelerName>
    <SubstanceName>PENICILLIN G POTASSIUM</SubstanceName>
    <StrengthNumber>20000000</StrengthNumber>
    <StrengthUnit>[iU]/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2020-11-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20010830</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Buffered penicillin G potassium for injection is indicated in the treatment of serious infections caused by susceptible strains of the designated microorganisms in the conditions listed below. Appropriate culture and susceptibility tests should be done before treatment in order to isolate and identify organisms causing infection and to determine their susceptibility to penicillin G. Therapy with Buffered penicillin G potassium for injection may be initiated before results of such tests are known when there is reason to believe the infection may involve any of the organisms listed below, however, once these results become available, appropriate therapy should be continued. To reduce the development of drug-resistant bacteria and maintain the effectiveness of penicillin G potassium and other antibacterial drugs, penicillin G potassium should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Buffered penicillin G potassium for injection, USP is sterile penicillin G potassium powder for reconstitution. It is an antibacterial agent intended for intravenous or intramuscularly use. Chemically, penicillin G potassium is monopotassium (2S,5R,6R)-3,3-dimethyl-7-oxo-6-(2-phenylacetamido)-4-thia-1-azabicyclo (3.2.0) heptane-2-carboxylate, and has the following chemical structure. Molecular Formula: C16H17KN2O4S. Molecular Weight: 372.48. Penicillin G potassium, a water soluble benzylpenicillin, is a white to almost white crystalline powder which is almost odorless and/or after reconstitution a colorless solution. The pH of freshly constituted solutions usually ranges from 6 to 8.5. Sodium citrate and citric acid have been added as a buffer. Buffered penicillin G potassium for injection, USP is supplied in vials equivalent to 1,000,000 units (1 million units), 5,000,000 units (5 million units), or 20,000,000 units (20 million units) of penicillin G as the potassium salt. Each million unit contains approximately 7.9 milligrams of sodium (0.34 mEq) and 65.6 milligrams of potassium (1.68 mEq).</Description>
  </NDC>
  <NDC>
    <NDCCode>10544-296-20</NDCCode>
    <PackageDescription>20 TABLET in 1 BOTTLE (10544-296-20)</PackageDescription>
    <NDC11Code>10544-0296-20</NDC11Code>
    <ProductNDC>10544-296</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Penicillin V Potassium</ProprietaryName>
    <NonProprietaryName>Penicillin V Potassium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20100909</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062936</ApplicationNumber>
    <LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
    <SubstanceName>PENICILLIN V POTASSIUM</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Penicillins [CS],Penicillin-class Antibacterial [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Penicillin V Potassium Tablets, USP and Penicillin V Potassium for Oral Solution, USP, are indicated in the treatment of mild to moderately severe infections due to penicillin G- sensitive microorganisms. Therapy should be guided by bacteriological studies (including sensitivity tests) and by clinical response. NOTE: Severe pneumonia, empyema, bacteremia, pericarditis, meningitis, and arthritis should not be treated with penicillin V during the acute stage. Indicated surgical procedures should be performed. The following Infections will usually respond to adequate dosage of Penicillin V. Streptococcal infections (without bacteremia): Mild-to-moderate infections of the upper respiratory tract, scarlet fever and mild erysipelas. NOTE: Streptococci in groups A, C, G, H, L, and M are very sensitive to penicillin. Other groups, including group D (enterococcus) are resistant. Pneumococcal infections: Mild to moderately severe infections of the respiratory tract. Staphylococcal infections - penicillin G sensitive: Mild infections of the skin and soft tissues. NOTE: Reports indicate an increasing number of strains of staphylococci resistant to penicillin G, emphasizing the need for culture and sensitivity studies in treating suspected staphylococcal infections. Fusospirochetosis (Vincent's gingivitis and pharyngitis): Mild to moderately severe infections of the oropharynx usually respond to therapy with oral penicillin. NOTE: Necessary dental care should be accomplished in infections involving the gum tissue. Medical conditions in which oral penicillin therapy is indicated as prophylaxis: For the prevention of recurrence following rheumatic fever and/or chorea: Prophylaxis with oral penicillin on a continuing basis has proven effective in preventing recurrence of these conditions. Although no controlled clinical efficacy studies have been conducted, penicillin V has been suggested by the American Heart Association and the American Dental Association for use as an oral regimen for prophylaxis against bacterial endocarditis in patients who have congenital heart disease or rheumatic or other acquired valvular heart disease when they undergo dental procedures and surgical procedures of the upper respiratory tract. 1 Oral penicillin should not be used in those patients at particularly high risk for endocarditis (e.g. those with prosthetic heart valves or surgically constructed systemic pulmonary shunts). Penicillin V should not be used as adjunctive prophylaxis for genitourinary instrumentation or surgery, lower-intestinal tract surgery, sigmoidoscopy, and childbirth. Since it may happen that alpha haemolytic streptococci relatively resistant to penicillin may be found when patients are receiving continuous oral penicillin for secondary prevention of rheumatic fever, prophylactic agents, other than penicillin may be chosen for these patients and prescribed in addition to their continuous rheumatic fever prophylactic regimen. NOTE: When selecting antibiotics for the prevention of bacterial endocarditis, the physician or dentist should read the full joint statement of the American Heart Association and the American Dental Association. 1. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Penicillin V Potassium Tablets, Penicillin V Potassium for Oral Solution and other antibacterial drugs, Penicillin V Potassium Tablets, and Penicillin V Potassium for Oral Solution should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antimicrobial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Penicillin V is the phenoxymethyl analog of penicillin G. Penicillin V potassium is the potassium salt of penicillin V. Penicillin V Potassium is designated chemically as 4-Thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, 3,3-dimethyl-7-oxo- 6-[(phenoxyacetyl)amino]-, monopotassium salt, [2S-(2α,5α,6β)]-. It has the following chemical structure. The molecular formula is C 16H 17KN 2O 5S, and the molecular weight is 388.48. Each tablet contains Penicillin V Potassium equivalent to 250 mg or 500 mg (400,000 or 800,000 units) of penicillin V. Each Penicillin V Potassium tablet, USP, 250 mg contains 0.73 mEq (28.2 mg) of Potassium and each Penicillin V potassium tablet, USP, 500 mg contains 1.46 mEq (56.4 mg) of Potassium. Each tablet also contains the following inactive ingredients: lactose, NF; magnesium stearate, NF; microcrystalline cellulose, NF; polyethylene glycol, NF; povidone, USP; sodium laurel sulfate, NF. Each 5 mL when reconstituted as directed contains Penicillin V Potassium equivalent to 125 mg or 250 mg (200,000 or 400,000 units) of Penicillin V. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 125 mg per 5 mL contains 0.42 mEq (16.4 mg) of Potassium. Each 5 mL of reconstituted Penicillin V Potassium for Oral Solution, USP, 250 mg per 5 mL contains 0.85 mEq (32.8 mg) of Potassium. Each 5 mL of reconstituted suspension also contains the following inactive ingredients: aspartame, NF; citric acid, USP; FD&amp;C Red No. 40; flavors; primary taste modifier; saccharin sodium, USP; silicon dioxide, NF; sodium citrate, USP; sodium propionate, NF; sucrose, NF.</Description>
  </NDC>
</NDCList>