{
"NDC": [
{
"NDCCode": "80005-153-34",
"PackageDescription": "200 mL in 1 BOTTLE (80005-153-34) ",
"NDC11Code": "80005-0153-34",
"ProductNDC": "80005-153",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "E.e.s",
"NonProprietaryName": "Erythromycin Ethylsuccinate",
"DosageFormName": "GRANULE, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20250115",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050207",
"LabelerName": "Carnegie Pharmaceuticals LLC",
"SubstanceName": "ERYTHROMYCIN ETHYLSUCCINATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE], Macrolide Antimicrobial [EPC], Macrolide [EPC], Macrolides [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250115",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of E.E.S. and other antibacterial drugs, E.E.S. should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. E.E.S. is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the diseases listed below. Upper respiratory tract infections of mild to moderate degree caused by Streptococcus pyogenes, Streptococcus pneumoniae, or Haemophilus influenzae (when used concomitantly with adequate doses of sulfonamides, since many strains of H. influenzae are not susceptible to the erythromycin concentrations ordinarily achieved). (See appropriate sulfonamide labeling for prescribing information.). Lower-respiratory tract infections of mild to moderate severity caused by Streptococcus pneumoniae or Streptococcus pyogenes. Listeriosis caused by Listeria monocytogenes. Pertussis (whooping cough) caused by Bordetella pertussis. Erythromycin is effective in eliminating the organism from the nasopharynx of infected individuals rendering them noninfectious. Some clinical studies suggest that erythromycin may be helpful in the prophylaxis of pertussis in exposed susceptible individuals. Respiratory tract infections due to Mycoplasma pneumoniae. Skin and skin structure infections of mild to moderate severity caused by Streptococcus pyogenes or Staphylococcus aureus (resistant staphylococci may emerge during treatment). Diphtheria: Infections due to Corynebacterium diphtheriae, as an adjunct to antitoxin, to prevent establishment of carriers and to eradicate the organism in carriers. Erythrasma: In the treatment of infections due to Corynebacterium minutissimum. Intestinal amebiasis caused by Entamoeba histolytica (oral erythromycins only). Extraenteric amebiasis requires treatment with other agents. Acute pelvic inflammatory disease caused by Neisseria gonorrhoeae: As an alternative drug in treatment of acute pelvic inflammatory disease caused by N. gonorrhoeae in female patients with a history of sensitivity to penicillin. Patients should have a serologic test for syphilis before receiving erythromycin as treatment of gonorrhea and a follow-up serologic test for syphilis after 3 months. Syphilis caused by Treponema pallidum: Erythromycin is an alternate choice of treatment for primary syphilis in patients allergic to the penicillins. In treatment of primary syphilis, spinal fluid examinations should be done before treatment and as part of follow-up after therapy. Erythromycins are indicated for the treatment of the following infections caused by Chlamydia trachomatis: conjunctivitis of the newborn, pneumonia of infancy, and urogenital infections during pregnancy. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of uncomplicated urethral, endocervical, or rectal infections in adults due to Chlamydia trachomatis. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of nongonococcal urethritis caused by Ureaplasma urealyticum. Legionnaires' Disease caused by Legionella pneumophila: Although no controlled clinical efficacy studies have been conducted, in vitro and limited preliminary clinical data suggest that erythromycin may be effective in treating Legionnaires' Disease.",
"Description": "Erythromycin is produced by a strain of Saccharopolyspora erythraea (formerly Streptomyces erythraeus) and belongs to the macrolide group of antibiotics. It is basic and readily forms salts with acids. The base, the stearate salt, and the esters are poorly soluble in water. Erythromycin ethylsuccinate is an ester of erythromycin suitable for oral administration. Erythromycin ethylsuccinate is known chemically as erythromycin 2'-(ethylsuccinate). The molecular formula is C43H75NO16 and the molecular weight is 862.06. The structural formula is. E.E.S. Granules are intended for reconstitution with water. Each 5-mL teaspoonful of reconstituted cherry-flavored suspension contains erythromycin ethylsuccinate equivalent to 200 mg of erythromycin. The pleasant tasting, fruit-flavored liquids are supplied ready for oral administration. E.E.S. 200 Liquid: Each 5-mL teaspoonful of fruit-flavored suspension contains erythromycin ethylsuccinate equivalent to 200 mg of erythromycin. E.E.S. 400 Liquid: Each 5-mL teaspoonful of orange-flavored suspension contains erythromycin ethylsuccinate equivalent to 400 mg of erythromycin. Granules and ready-made suspensions are intended primarily for pediatric use but can also be used in adults. E.E.S. 400 film-coated tablets: Each tablet contains erythromycin ethylsuccinate equivalent to 400 mg of erythromycin. The film-coated tablets are intended primarily for adults or older children."
},
{
"NDCCode": "80005-141-08",
"PackageDescription": "30 TABLET in 1 BOTTLE (80005-141-08) ",
"NDC11Code": "80005-0141-08",
"ProductNDC": "80005-141",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rasagiline",
"NonProprietaryName": "Rasagiline Mesylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201942",
"LabelerName": "Carnegie Pharmaceuticals LLC",
"SubstanceName": "RASAGILINE MESYLATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Monoamine Oxidase Inhibitor [EPC], Monoamine Oxidase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20260115",
"SamplePackage": "N",
"IndicationAndUsage": "Rasagiline tablets are indicated for the treatment of Parkinson’s disease (PD).",
"Description": "Rasagiline tablets contain rasagiline (as the mesylate), a propargylamine-based drug indicated for the treatment of idiopathic Parkinson’s disease. Rasagiline mesylate is designated chemically as: 1H-Inden-1-amine, 2, 3-dihydro-N-2-propynyl-, (1R)-, methanesulfonate. The empirical formula of rasagiline mesylate is C12H13NCH4SO3 and its molecular weight is 267.34. Its structural formula is. Rasagiline mesylate is a white crystalline powder, freely soluble in methanol and soluble in water. Each rasagiline tablet for oral administration contains 0.5 mg or 1 mg of rasagiline (equivalent to 0.78 mg or 1.56 mg of rasagiline mesylate). Each rasagiline tablet also contains the following inactive ingredients: colloidal silicon dioxide, corn starch, microcrystalline cellulose, pregelatinized starch, stearic acid, and talc."
},
{
"NDCCode": "80005-141-10",
"PackageDescription": "90 TABLET in 1 BOTTLE (80005-141-10) ",
"NDC11Code": "80005-0141-10",
"ProductNDC": "80005-141",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rasagiline",
"NonProprietaryName": "Rasagiline Mesylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201942",
"LabelerName": "Carnegie Pharmaceuticals LLC",
"SubstanceName": "RASAGILINE MESYLATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Monoamine Oxidase Inhibitor [EPC], Monoamine Oxidase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20260115",
"SamplePackage": "N",
"IndicationAndUsage": "Rasagiline tablets are indicated for the treatment of Parkinson’s disease (PD).",
"Description": "Rasagiline tablets contain rasagiline (as the mesylate), a propargylamine-based drug indicated for the treatment of idiopathic Parkinson’s disease. Rasagiline mesylate is designated chemically as: 1H-Inden-1-amine, 2, 3-dihydro-N-2-propynyl-, (1R)-, methanesulfonate. The empirical formula of rasagiline mesylate is C12H13NCH4SO3 and its molecular weight is 267.34. Its structural formula is. Rasagiline mesylate is a white crystalline powder, freely soluble in methanol and soluble in water. Each rasagiline tablet for oral administration contains 0.5 mg or 1 mg of rasagiline (equivalent to 0.78 mg or 1.56 mg of rasagiline mesylate). Each rasagiline tablet also contains the following inactive ingredients: colloidal silicon dioxide, corn starch, microcrystalline cellulose, pregelatinized starch, stearic acid, and talc."
},
{
"NDCCode": "80005-141-14",
"PackageDescription": "500 TABLET in 1 BOTTLE (80005-141-14) ",
"NDC11Code": "80005-0141-14",
"ProductNDC": "80005-141",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rasagiline",
"NonProprietaryName": "Rasagiline Mesylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201942",
"LabelerName": "Carnegie Pharmaceuticals LLC",
"SubstanceName": "RASAGILINE MESYLATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Monoamine Oxidase Inhibitor [EPC], Monoamine Oxidase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20260115",
"SamplePackage": "N",
"IndicationAndUsage": "Rasagiline tablets are indicated for the treatment of Parkinson’s disease (PD).",
"Description": "Rasagiline tablets contain rasagiline (as the mesylate), a propargylamine-based drug indicated for the treatment of idiopathic Parkinson’s disease. Rasagiline mesylate is designated chemically as: 1H-Inden-1-amine, 2, 3-dihydro-N-2-propynyl-, (1R)-, methanesulfonate. The empirical formula of rasagiline mesylate is C12H13NCH4SO3 and its molecular weight is 267.34. Its structural formula is. Rasagiline mesylate is a white crystalline powder, freely soluble in methanol and soluble in water. Each rasagiline tablet for oral administration contains 0.5 mg or 1 mg of rasagiline (equivalent to 0.78 mg or 1.56 mg of rasagiline mesylate). Each rasagiline tablet also contains the following inactive ingredients: colloidal silicon dioxide, corn starch, microcrystalline cellulose, pregelatinized starch, stearic acid, and talc."
},
{
"NDCCode": "80005-142-08",
"PackageDescription": "30 TABLET in 1 BOTTLE (80005-142-08) ",
"NDC11Code": "80005-0142-08",
"ProductNDC": "80005-142",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rasagiline",
"NonProprietaryName": "Rasagiline Mesylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201942",
"LabelerName": "Carnegie Pharmaceuticals LLC",
"SubstanceName": "RASAGILINE MESYLATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Monoamine Oxidase Inhibitor [EPC], Monoamine Oxidase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20260115",
"SamplePackage": "N",
"IndicationAndUsage": "Rasagiline tablets are indicated for the treatment of Parkinson’s disease (PD).",
"Description": "Rasagiline tablets contain rasagiline (as the mesylate), a propargylamine-based drug indicated for the treatment of idiopathic Parkinson’s disease. Rasagiline mesylate is designated chemically as: 1H-Inden-1-amine, 2, 3-dihydro-N-2-propynyl-, (1R)-, methanesulfonate. The empirical formula of rasagiline mesylate is C12H13NCH4SO3 and its molecular weight is 267.34. Its structural formula is. Rasagiline mesylate is a white crystalline powder, freely soluble in methanol and soluble in water. Each rasagiline tablet for oral administration contains 0.5 mg or 1 mg of rasagiline (equivalent to 0.78 mg or 1.56 mg of rasagiline mesylate). Each rasagiline tablet also contains the following inactive ingredients: colloidal silicon dioxide, corn starch, microcrystalline cellulose, pregelatinized starch, stearic acid, and talc."
},
{
"NDCCode": "80005-142-10",
"PackageDescription": "90 TABLET in 1 BOTTLE (80005-142-10) ",
"NDC11Code": "80005-0142-10",
"ProductNDC": "80005-142",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rasagiline",
"NonProprietaryName": "Rasagiline Mesylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201942",
"LabelerName": "Carnegie Pharmaceuticals LLC",
"SubstanceName": "RASAGILINE MESYLATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Monoamine Oxidase Inhibitor [EPC], Monoamine Oxidase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20260115",
"SamplePackage": "N",
"IndicationAndUsage": "Rasagiline tablets are indicated for the treatment of Parkinson’s disease (PD).",
"Description": "Rasagiline tablets contain rasagiline (as the mesylate), a propargylamine-based drug indicated for the treatment of idiopathic Parkinson’s disease. Rasagiline mesylate is designated chemically as: 1H-Inden-1-amine, 2, 3-dihydro-N-2-propynyl-, (1R)-, methanesulfonate. The empirical formula of rasagiline mesylate is C12H13NCH4SO3 and its molecular weight is 267.34. Its structural formula is. Rasagiline mesylate is a white crystalline powder, freely soluble in methanol and soluble in water. Each rasagiline tablet for oral administration contains 0.5 mg or 1 mg of rasagiline (equivalent to 0.78 mg or 1.56 mg of rasagiline mesylate). Each rasagiline tablet also contains the following inactive ingredients: colloidal silicon dioxide, corn starch, microcrystalline cellulose, pregelatinized starch, stearic acid, and talc."
},
{
"NDCCode": "80005-142-14",
"PackageDescription": "500 TABLET in 1 BOTTLE (80005-142-14) ",
"NDC11Code": "80005-0142-14",
"ProductNDC": "80005-142",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rasagiline",
"NonProprietaryName": "Rasagiline Mesylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201942",
"LabelerName": "Carnegie Pharmaceuticals LLC",
"SubstanceName": "RASAGILINE MESYLATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Monoamine Oxidase Inhibitor [EPC], Monoamine Oxidase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20260115",
"SamplePackage": "N",
"IndicationAndUsage": "Rasagiline tablets are indicated for the treatment of Parkinson’s disease (PD).",
"Description": "Rasagiline tablets contain rasagiline (as the mesylate), a propargylamine-based drug indicated for the treatment of idiopathic Parkinson’s disease. Rasagiline mesylate is designated chemically as: 1H-Inden-1-amine, 2, 3-dihydro-N-2-propynyl-, (1R)-, methanesulfonate. The empirical formula of rasagiline mesylate is C12H13NCH4SO3 and its molecular weight is 267.34. Its structural formula is. Rasagiline mesylate is a white crystalline powder, freely soluble in methanol and soluble in water. Each rasagiline tablet for oral administration contains 0.5 mg or 1 mg of rasagiline (equivalent to 0.78 mg or 1.56 mg of rasagiline mesylate). Each rasagiline tablet also contains the following inactive ingredients: colloidal silicon dioxide, corn starch, microcrystalline cellulose, pregelatinized starch, stearic acid, and talc."
},
{
"NDCCode": "10096-0238-1",
"PackageDescription": "237 mL in 1 BOTTLE, DISPENSING (10096-0238-1)",
"NDC11Code": "10096-0238-01",
"ProductNDC": "10096-0238",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Mommy Tillia",
"ProprietaryNameSuffix": "Antibacterial Hand",
"NonProprietaryName": "Alcohol",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20101220",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333E",
"LabelerName": "Avon Products, Inc.",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "153.34",
"StrengthUnit": "mL/237mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Uses: 1 for handwashing to decrease bacteria on the skin."
},
{
"NDCCode": "54575-153-02",
"PackageDescription": "2 mL in 1 VIAL, MULTI-DOSE (54575-153-02)",
"NDC11Code": "54575-0153-02",
"ProductNDC": "54575-153",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "3-ragweed Mix, Giant/short/western Pollen",
"NonProprietaryName": "Ambrosia Psilostachya Pollen And Ambrosia Trifida Pollen And Ambrosia Artemisiifolia Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19671207",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101376",
"LabelerName": "Allergy Laboratories, Inc.",
"SubstanceName": "AMBROSIA PSILOSTACHYA POLLEN; AMBROSIA TRIFIDA POLLEN; AMBROSIA ARTEMISIIFOLIA POLLEN",
"StrengthNumber": ".33; .33; .34",
"StrengthUnit": "g/20mL; g/20mL; g/20mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens."
},
{
"NDCCode": "54575-153-10",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (54575-153-10)",
"NDC11Code": "54575-0153-10",
"ProductNDC": "54575-153",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "3-ragweed Mix, Giant/short/western Pollen",
"NonProprietaryName": "Ambrosia Psilostachya Pollen And Ambrosia Trifida Pollen And Ambrosia Artemisiifolia Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19671207",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101376",
"LabelerName": "Allergy Laboratories, Inc.",
"SubstanceName": "AMBROSIA PSILOSTACHYA POLLEN; AMBROSIA TRIFIDA POLLEN; AMBROSIA ARTEMISIIFOLIA POLLEN",
"StrengthNumber": ".33; .33; .34",
"StrengthUnit": "g/20mL; g/20mL; g/20mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens."
},
{
"NDCCode": "54575-153-30",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (54575-153-30)",
"NDC11Code": "54575-0153-30",
"ProductNDC": "54575-153",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "3-ragweed Mix, Giant/short/western Pollen",
"NonProprietaryName": "Ambrosia Psilostachya Pollen And Ambrosia Trifida Pollen And Ambrosia Artemisiifolia Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19671207",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101376",
"LabelerName": "Allergy Laboratories, Inc.",
"SubstanceName": "AMBROSIA PSILOSTACHYA POLLEN; AMBROSIA TRIFIDA POLLEN; AMBROSIA ARTEMISIIFOLIA POLLEN",
"StrengthNumber": ".33; .33; .34",
"StrengthUnit": "g/20mL; g/20mL; g/20mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens."
},
{
"NDCCode": "54575-153-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (54575-153-50)",
"NDC11Code": "54575-0153-50",
"ProductNDC": "54575-153",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "3-ragweed Mix, Giant/short/western Pollen",
"NonProprietaryName": "Ambrosia Psilostachya Pollen And Ambrosia Trifida Pollen And Ambrosia Artemisiifolia Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19671207",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101376",
"LabelerName": "Allergy Laboratories, Inc.",
"SubstanceName": "AMBROSIA PSILOSTACHYA POLLEN; AMBROSIA TRIFIDA POLLEN; AMBROSIA ARTEMISIIFOLIA POLLEN",
"StrengthNumber": ".33; .33; .34",
"StrengthUnit": "g/20mL; g/20mL; g/20mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens."
},
{
"NDCCode": "68382-711-64",
"PackageDescription": "34 TABLET, DELAYED RELEASE in 1 BOTTLE (68382-711-64) ",
"NDC11Code": "68382-0711-64",
"ProductNDC": "68382-711",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mesalamine",
"NonProprietaryName": "Mesalamine",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20170619",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091640",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "MESALAMINE",
"StrengthNumber": "1.2",
"StrengthUnit": "g/1",
"Pharm_Classes": "Aminosalicylate [EPC], Aminosalicylic Acids [CS]",
"Status": "Active",
"LastUpdate": "2023-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170619",
"SamplePackage": "N",
"IndicationAndUsage": "Mesalamine delayed-release tablets are indicated for the: : 1 induction and maintenance of remission in adult patients with mildly to moderately active ulcerative colitis., 2 treatment of mildly to moderately active ulcerative colitis in pediatric patients weighing at least 24 kg.",
"Description": "Each mesalamine delayed-release tablet for oral administration contains 1.2 g. 5-aminosalicylic acid (5-ASA; mesalamine), an anti-inflammatory agent. Mesalamine also has the chemical name 5-amino-2-hydroxybenzoic acid and its structural formula is:. Molecular formula: C7H7NO3. Molecular weight: 153.14. Mesalamine, USP is a light tan to pink colored, needle-shaped crystals. Color may darken on exposure to air. It is odorless or may have a slight characteristic odor. The tablet is coated with a pH-dependent polymer film, which breaks down at or above pH 6.8, normally in the terminal ileum where mesalamine then begins to be released from the tablet core. The tablet core contains mesalamine with hydrophilic excipients and provides for extended release of mesalamine. Each mesalamine delayed-release tablet, USP intended for oral administration contains 1.2 g of mesalamine. In addition, each tablet contains the following inactive ingredients: carboxymethylcellulose sodium, colloidal silicon dioxide, hypromellose, iron oxide red, iron oxide yellow, magnesium stearate, methacrylic acid copolymer, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, triethyl citrate, talc and titanium dioxide. The Product meets USP Dissolution Test 4."
},
{
"NDCCode": "72189-153-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (72189-153-30) ",
"NDC11Code": "72189-0153-30",
"ProductNDC": "72189-153",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ramelteon",
"NonProprietaryName": "Ramelteon",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20201103",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211567",
"LabelerName": "DIRECT RX",
"SubstanceName": "RAMELTEON",
"StrengthNumber": "8",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Melatonin Receptor Agonist [EPC], Melatonin Receptor Agonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-01-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201103",
"SamplePackage": "N",
"IndicationAndUsage": "Ramelteon tablets are indicated for the treatment of insomnia characterized by difficulty with sleep onset. The clinical trials performed in support of efficacy were up to six months in duration. The final formal assessments of sleep latency were performed after two days of treatment during the crossover study (elderly only), at five weeks in the six week studies (adults and elderly), and at the end of the six month study (adults and elderly) [see Clinical Studies (14)].",
"Description": "Ramelteon is an orally active hypnotic chemically designated as (S)-N-[2-(1, 6, 7, 8 tetrahydro-2H-indeno-[5, 4-b]furan-8-yl)ethyl]propionamide and containing one chiral center. The compound is produced as the (S)-enantiomer, with an molecular formula of C16H21NO2, molecular weight of 259.34, and the following chemical structure. [Image]. Ramelteon is a white to cream color powder and it is freely soluble in methanol and practically insoluble in water. Each film-coated tablet contains 8 mg ramelteon and contains following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, ferrosoferric oxide, hypromellose, iron oxide red, iron oxide yellow, polyethylene glycol, povidone, pregelatinized starch (botanical source: maize), sodium stearyl fumarate, titanium dioxide."
},
{
"NDCCode": "72789-153-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (72789-153-30) ",
"NDC11Code": "72789-0153-30",
"ProductNDC": "72789-153",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190208",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211933",
"LabelerName": "PD-Rx Pharmaceuticals, Inc.",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-10-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200201",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated: 1 To reduce the risk of:, 2 Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHD, 3 MI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHD, 4 Non-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD, 5 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in:, 6 Adults with primary hyperlipidemia., 7 Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH)., 8 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH)., 9 As an adjunct to diet for the treatment of adults with:, 10 Primary dysbetalipoproteinemia, 11 Hypertriglyceridemia.",
"Description": "Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium USP is (βR, δR)-2-(p-fluorophenyl)-β,δ-dihydroxy-5-isopropyl-3-phenyl-4(phenylcarbamoyl)pyrrole-l-heptanaote (1:2), trihydrate. The molecular formula of atorvastatin calcium USP is C 66H 68CaF 2N 4O 10.3H 2O and its molecular weight is 1209.41. Its structural formula is:. Atorvastatin calcium USP is a white to off-white crystalline powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium USP is soluble to freely soluble in methanol, slightly soluble in alcohol, insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer, and in acetonitrile. Atorvastatin calcium tablets, USP for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.34 mg, 20.68 mg, 41.36 mg, or 82.73 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, magnesium aluminometasilicate, microcrystalline cellulose, polysorbate 80, precipitated calcium carbonate, polyvinyl alcohol, titanium dioxide, talc, polyethylene glycol and lecithin."
},
{
"NDCCode": "80803-153-50",
"PackageDescription": "1 VIAL, SINGLE-USE in 1 CARTON (80803-153-50) / 20 mL in 1 VIAL, SINGLE-USE",
"NDC11Code": "80803-0153-50",
"ProductNDC": "80803-153",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fyarro",
"NonProprietaryName": "Sirolimus",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SUSPENSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20211206",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA213312",
"LabelerName": "Aadi Bioscience, Inc.",
"SubstanceName": "SIROLIMUS",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Immunologic Activity [PE], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA], mTOR Inhibitor Immunosuppressant [EPC], mTOR Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20211206",
"SamplePackage": "N",
"IndicationAndUsage": "FYARRO® is indicated for the treatment of adult patients with locally advanced unresectable or metastatic malignant perivascular epithelioid cell tumor (PEComa).",
"Description": "FYARRO (sirolimus protein-bound particles for injectable suspension) (albumin-bound) is sirolimus formulated as albumin-bound nanoparticles. The active ingredient in FYARRO is sirolimus bound to albumin which exists in the nanoparticles in a non-crystalline, amorphous state. Sirolimus is a mechanistic target of rapamycin kinase (mTOR) inhibitor. Sirolimus is a macrocyclic lactone produced by Streptomyces hygroscopicus. The chemical name of sirolimus is [3S[3R*[S*(1R*,3S*,4S*)),6S*,7E,9S*,10S*,12S*,14R*,15E,17E,19E,21R*,23R*,26S*, 27S*,3 4aR*]]9,10,12,13,14,21,22,23,24,25,26,27,32,33,34,34a-Hexadecahydro-9,27-dihydroxy 3-[2-(4-hydroxy-3methoxycyclohexyl)-1-methylethyl]-10,21-dimethoxy-6,8,12,14,20,26-hexamethyl-23,27-epoxy-3Hpyrido[2,1-c][1,4]oxaazacyclohentriacontine-1,5,11,28,29(4H,6H,31H)-pentone. Its empirical formula is C51H79NO13, and the molecular weight is 914.2. The structural formula of sirolimus is illustrated as follows:. Sirolimus is a white to off-white crystalline powder and is insoluble in water but freely soluble in benzyl alcohol, chloroform, acetone, and acetonitrile. FYARRO is supplied as a white to yellow, sterile, lyophilized powder for reconstitution with 20 mL of 0.9% Sodium Chloride Injection, USP prior to intravenous infusion. Each single-dose vial contains 100 mg of sirolimus (bound to human albumin) and approximately 850 mg of human albumin (containing sodium caprylate and sodium acetyltryptophanate). Each milliliter (mL) of reconstituted suspension contains 5 mg sirolimus formulated as albumin-bound particles."
},
{
"NDCCode": "80005-112-12",
"PackageDescription": "120 TABLET in 1 BOTTLE (80005-112-12) ",
"NDC11Code": "80005-0112-12",
"ProductNDC": "80005-112",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Etravirine",
"NonProprietaryName": "Etravirine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220607",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215402",
"LabelerName": "Carnegie Pharmaceuticals LLC",
"SubstanceName": "ETRAVIRINE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Human Immunodeficiency Virus 1 Non-Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Non-Nucleoside Analog [EXT], Non-Nucleoside Reverse Transcriptase Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-03-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220607",
"SamplePackage": "N",
"IndicationAndUsage": "Etravirine, in combination with other antiretroviral agents, is indicated for the treatment of human immunodeficiency virus type 1 (HIV-1) infection in antiretroviral treatment-experienced adult patients and pediatric patients 2 years of age and older [see Microbiology (12.4) and Clinical Studies (14)].",
"Description": "Etravirine is a non-nucleoside reverse transcriptase inhibitor (NNRTI) of human immunodeficiency virus type 1 (HIV-1). The chemical name for etravirine is 4-[[6-amino-5-bromo-2-[(4-cyanophenyl)amino]-4- pyrimidinyl]oxy]-3,5-dimethylbenzonitrile. Its molecular formula is C20H15BrN6O and its molecular weight is 435.28. Etravirine has the following structural formula. Etravirine is a white to slightly yellowish-brown powder. Etravirine is practically insoluble in water over a wide pH range. It is very slightly soluble in propylene glycol and slightly soluble in ethanol. Etravirine is soluble in polyethylene glycol (PEG)400 and freely soluble in some organic solvents (e.g., N,N-dimethylformamide and tetrahydrofuran). Etravirine 100 mg tablets are available as white to off-white, oval tablets for oral administration. Each 100 mg tablet contains 100 mg of etravirine and the inactive ingredients povidone, microcrystalline cellulose, sodium lauryl sulfate, crospovidone, sodium starch glycolate, silicon dioxide and magnesium stearate. Etravirine 200 mg tablets are available as white to off-white, oval tables for oral administration. Each 200 mg tablet contains 200 mg of etravirine and the inactive ingredients povidone, microcrystalline cellulose, sodium lauryl sulfate, crospovidone, sodium starch glycolate, silicon dioxide and magnesium stearate."
},
{
"NDCCode": "80005-113-09",
"PackageDescription": "60 TABLET in 1 BOTTLE (80005-113-09) ",
"NDC11Code": "80005-0113-09",
"ProductNDC": "80005-113",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Etravirine",
"NonProprietaryName": "Etravirine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220607",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215402",
"LabelerName": "Carnegie Pharmaceuticals LLC",
"SubstanceName": "ETRAVIRINE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Human Immunodeficiency Virus 1 Non-Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Non-Nucleoside Analog [EXT], Non-Nucleoside Reverse Transcriptase Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-03-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220607",
"SamplePackage": "N",
"IndicationAndUsage": "Etravirine, in combination with other antiretroviral agents, is indicated for the treatment of human immunodeficiency virus type 1 (HIV-1) infection in antiretroviral treatment-experienced adult patients and pediatric patients 2 years of age and older [see Microbiology (12.4) and Clinical Studies (14)].",
"Description": "Etravirine is a non-nucleoside reverse transcriptase inhibitor (NNRTI) of human immunodeficiency virus type 1 (HIV-1). The chemical name for etravirine is 4-[[6-amino-5-bromo-2-[(4-cyanophenyl)amino]-4- pyrimidinyl]oxy]-3,5-dimethylbenzonitrile. Its molecular formula is C20H15BrN6O and its molecular weight is 435.28. Etravirine has the following structural formula. Etravirine is a white to slightly yellowish-brown powder. Etravirine is practically insoluble in water over a wide pH range. It is very slightly soluble in propylene glycol and slightly soluble in ethanol. Etravirine is soluble in polyethylene glycol (PEG)400 and freely soluble in some organic solvents (e.g., N,N-dimethylformamide and tetrahydrofuran). Etravirine 100 mg tablets are available as white to off-white, oval tablets for oral administration. Each 100 mg tablet contains 100 mg of etravirine and the inactive ingredients povidone, microcrystalline cellulose, sodium lauryl sulfate, crospovidone, sodium starch glycolate, silicon dioxide and magnesium stearate. Etravirine 200 mg tablets are available as white to off-white, oval tables for oral administration. Each 200 mg tablet contains 200 mg of etravirine and the inactive ingredients povidone, microcrystalline cellulose, sodium lauryl sulfate, crospovidone, sodium starch glycolate, silicon dioxide and magnesium stearate."
},
{
"NDCCode": "80005-114-02",
"PackageDescription": "5 CAPSULE in 1 BOTTLE (80005-114-02) ",
"NDC11Code": "80005-0114-02",
"ProductNDC": "80005-114",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lomustine",
"NonProprietaryName": "Lomustine",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20251110",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219265",
"LabelerName": "Carnegie Pharmaceuticals LLC",
"SubstanceName": "LOMUSTINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Alkylating Activity [MoA], Alkylating Drug [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251110",
"SamplePackage": "N",
"Description": "Lomustine Capsules, USP (lomustine) is an alkylating drug for oral administration. The chemical name for lomustine is 1-(2-chloro-ethyl)-3-cyclohexyl-1-nitrosourea and the molecular formula is C9H16ClN3O2. The molecular weight is 233.71. Lomustine is a yellow powder, which is soluble in 10% ethanol (0.05 mg per mL) and in absolute alcohol (70 mg per mL). Lomustine is insoluble in water (<0.05 mg per mL). The chemical structure is. Lomustine Capsules, USP are supplied as 10 mg, 40 mg, and 100 mg capsules and contain the following inactive ingredients: magnesium stearate NF and mannitol USP. The 10 mg capsule shells are composed of gelatin and titanium dioxide. The 40 mg and 100 mg capsule shells are composed of FD&C blue #1, gelatin, iron oxide black, iron oxide yellow, and titanium dioxide. The capsules are printed with black ink composed of iron oxide black, potassium hydroxide, propylene glycol, shellac, and strong ammonia solution. FDA approved dissolution method is not listed in the USP Monograph for Lomustine Capsules, USP, 10 mg, 40 mg, and 100 mg."
},
{
"NDCCode": "80005-115-02",
"PackageDescription": "5 CAPSULE in 1 BOTTLE (80005-115-02) ",
"NDC11Code": "80005-0115-02",
"ProductNDC": "80005-115",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lomustine",
"NonProprietaryName": "Lomustine",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20251110",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219265",
"LabelerName": "Carnegie Pharmaceuticals LLC",
"SubstanceName": "LOMUSTINE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Alkylating Activity [MoA], Alkylating Drug [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251110",
"SamplePackage": "N",
"Description": "Lomustine Capsules, USP (lomustine) is an alkylating drug for oral administration. The chemical name for lomustine is 1-(2-chloro-ethyl)-3-cyclohexyl-1-nitrosourea and the molecular formula is C9H16ClN3O2. The molecular weight is 233.71. Lomustine is a yellow powder, which is soluble in 10% ethanol (0.05 mg per mL) and in absolute alcohol (70 mg per mL). Lomustine is insoluble in water (<0.05 mg per mL). The chemical structure is. Lomustine Capsules, USP are supplied as 10 mg, 40 mg, and 100 mg capsules and contain the following inactive ingredients: magnesium stearate NF and mannitol USP. The 10 mg capsule shells are composed of gelatin and titanium dioxide. The 40 mg and 100 mg capsule shells are composed of FD&C blue #1, gelatin, iron oxide black, iron oxide yellow, and titanium dioxide. The capsules are printed with black ink composed of iron oxide black, potassium hydroxide, propylene glycol, shellac, and strong ammonia solution. FDA approved dissolution method is not listed in the USP Monograph for Lomustine Capsules, USP, 10 mg, 40 mg, and 100 mg."
},
{
"NDCCode": "80005-116-02",
"PackageDescription": "5 CAPSULE in 1 BOTTLE (80005-116-02) ",
"NDC11Code": "80005-0116-02",
"ProductNDC": "80005-116",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lomustine",
"NonProprietaryName": "Lomustine",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20251110",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219265",
"LabelerName": "Carnegie Pharmaceuticals LLC",
"SubstanceName": "LOMUSTINE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Alkylating Activity [MoA], Alkylating Drug [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251110",
"SamplePackage": "N",
"Description": "Lomustine Capsules, USP (lomustine) is an alkylating drug for oral administration. The chemical name for lomustine is 1-(2-chloro-ethyl)-3-cyclohexyl-1-nitrosourea and the molecular formula is C9H16ClN3O2. The molecular weight is 233.71. Lomustine is a yellow powder, which is soluble in 10% ethanol (0.05 mg per mL) and in absolute alcohol (70 mg per mL). Lomustine is insoluble in water (<0.05 mg per mL). The chemical structure is. Lomustine Capsules, USP are supplied as 10 mg, 40 mg, and 100 mg capsules and contain the following inactive ingredients: magnesium stearate NF and mannitol USP. The 10 mg capsule shells are composed of gelatin and titanium dioxide. The 40 mg and 100 mg capsule shells are composed of FD&C blue #1, gelatin, iron oxide black, iron oxide yellow, and titanium dioxide. The capsules are printed with black ink composed of iron oxide black, potassium hydroxide, propylene glycol, shellac, and strong ammonia solution. FDA approved dissolution method is not listed in the USP Monograph for Lomustine Capsules, USP, 10 mg, 40 mg, and 100 mg."
},
{
"NDCCode": "80005-117-11",
"PackageDescription": "100 TABLET in 1 BOTTLE (80005-117-11) ",
"NDC11Code": "80005-0117-11",
"ProductNDC": "80005-117",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Primidone",
"NonProprietaryName": "Primidone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218366",
"LabelerName": "Carnegie Pharmaceuticals LLC",
"SubstanceName": "PRIMIDONE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2024-07-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240501",
"SamplePackage": "N",
"IndicationAndUsage": "Primidone tablets, used alone or concomitantly with other anticonvulsants, is indicated in the control of grand mal, psychomotor, and focal epileptic seizures. It may control grand mal seizures refractory to other anticonvulsant therapy.",
"Description": "Chemical name: 5-ethyldihydro-5-phenyl-4,6 (1H, 5H)-pyrimidinedione. Structural formula. Primidone is a white, crystalline, highly stable substance, M.P. 279-284°C. It is poorly soluble in water (60 mg per 100 mL at 37°C) and in most organic solvents. It possesses no acidic properties, in contrast to its barbiturate analog. Primidone Tablets, USP 50 mg and 250 mg contain the following inactive ingredients: lactose monohydrate, NF; magnesium stearate, NF; methyl cellulose, USP; microcrystalline cellulose, NF; purified water, USP; sodium lauryl sulfate, NF; sodium starch glycolate, NF; talc, USP."
},
{
"NDCCode": "80005-117-14",
"PackageDescription": "500 TABLET in 1 BOTTLE (80005-117-14) ",
"NDC11Code": "80005-0117-14",
"ProductNDC": "80005-117",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Primidone",
"NonProprietaryName": "Primidone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218366",
"LabelerName": "Carnegie Pharmaceuticals LLC",
"SubstanceName": "PRIMIDONE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2024-07-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240501",
"SamplePackage": "N",
"IndicationAndUsage": "Primidone tablets, used alone or concomitantly with other anticonvulsants, is indicated in the control of grand mal, psychomotor, and focal epileptic seizures. It may control grand mal seizures refractory to other anticonvulsant therapy.",
"Description": "Chemical name: 5-ethyldihydro-5-phenyl-4,6 (1H, 5H)-pyrimidinedione. Structural formula. Primidone is a white, crystalline, highly stable substance, M.P. 279-284°C. It is poorly soluble in water (60 mg per 100 mL at 37°C) and in most organic solvents. It possesses no acidic properties, in contrast to its barbiturate analog. Primidone Tablets, USP 50 mg and 250 mg contain the following inactive ingredients: lactose monohydrate, NF; magnesium stearate, NF; methyl cellulose, USP; microcrystalline cellulose, NF; purified water, USP; sodium lauryl sulfate, NF; sodium starch glycolate, NF; talc, USP."
},
{
"NDCCode": "80005-117-15",
"PackageDescription": "1000 TABLET in 1 BOTTLE (80005-117-15) ",
"NDC11Code": "80005-0117-15",
"ProductNDC": "80005-117",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Primidone",
"NonProprietaryName": "Primidone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218366",
"LabelerName": "Carnegie Pharmaceuticals LLC",
"SubstanceName": "PRIMIDONE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2024-07-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240501",
"SamplePackage": "N",
"IndicationAndUsage": "Primidone tablets, used alone or concomitantly with other anticonvulsants, is indicated in the control of grand mal, psychomotor, and focal epileptic seizures. It may control grand mal seizures refractory to other anticonvulsant therapy.",
"Description": "Chemical name: 5-ethyldihydro-5-phenyl-4,6 (1H, 5H)-pyrimidinedione. Structural formula. Primidone is a white, crystalline, highly stable substance, M.P. 279-284°C. It is poorly soluble in water (60 mg per 100 mL at 37°C) and in most organic solvents. It possesses no acidic properties, in contrast to its barbiturate analog. Primidone Tablets, USP 50 mg and 250 mg contain the following inactive ingredients: lactose monohydrate, NF; magnesium stearate, NF; methyl cellulose, USP; microcrystalline cellulose, NF; purified water, USP; sodium lauryl sulfate, NF; sodium starch glycolate, NF; talc, USP."
},
{
"NDCCode": "80005-118-11",
"PackageDescription": "100 TABLET in 1 BOTTLE (80005-118-11) ",
"NDC11Code": "80005-0118-11",
"ProductNDC": "80005-118",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Primidone",
"NonProprietaryName": "Primidone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218366",
"LabelerName": "Carnegie Pharmaceuticals LLC",
"SubstanceName": "PRIMIDONE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2024-07-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240501",
"SamplePackage": "N",
"IndicationAndUsage": "Primidone tablets, used alone or concomitantly with other anticonvulsants, is indicated in the control of grand mal, psychomotor, and focal epileptic seizures. It may control grand mal seizures refractory to other anticonvulsant therapy.",
"Description": "Chemical name: 5-ethyldihydro-5-phenyl-4,6 (1H, 5H)-pyrimidinedione. Structural formula. Primidone is a white, crystalline, highly stable substance, M.P. 279-284°C. It is poorly soluble in water (60 mg per 100 mL at 37°C) and in most organic solvents. It possesses no acidic properties, in contrast to its barbiturate analog. Primidone Tablets, USP 50 mg and 250 mg contain the following inactive ingredients: lactose monohydrate, NF; magnesium stearate, NF; methyl cellulose, USP; microcrystalline cellulose, NF; purified water, USP; sodium lauryl sulfate, NF; sodium starch glycolate, NF; talc, USP."
},
{
"NDCCode": "80005-118-14",
"PackageDescription": "500 TABLET in 1 BOTTLE (80005-118-14) ",
"NDC11Code": "80005-0118-14",
"ProductNDC": "80005-118",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Primidone",
"NonProprietaryName": "Primidone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218366",
"LabelerName": "Carnegie Pharmaceuticals LLC",
"SubstanceName": "PRIMIDONE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2024-07-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240501",
"SamplePackage": "N",
"IndicationAndUsage": "Primidone tablets, used alone or concomitantly with other anticonvulsants, is indicated in the control of grand mal, psychomotor, and focal epileptic seizures. It may control grand mal seizures refractory to other anticonvulsant therapy.",
"Description": "Chemical name: 5-ethyldihydro-5-phenyl-4,6 (1H, 5H)-pyrimidinedione. Structural formula. Primidone is a white, crystalline, highly stable substance, M.P. 279-284°C. It is poorly soluble in water (60 mg per 100 mL at 37°C) and in most organic solvents. It possesses no acidic properties, in contrast to its barbiturate analog. Primidone Tablets, USP 50 mg and 250 mg contain the following inactive ingredients: lactose monohydrate, NF; magnesium stearate, NF; methyl cellulose, USP; microcrystalline cellulose, NF; purified water, USP; sodium lauryl sulfate, NF; sodium starch glycolate, NF; talc, USP."
},
{
"NDCCode": "80005-118-15",
"PackageDescription": "1000 TABLET in 1 BOTTLE (80005-118-15) ",
"NDC11Code": "80005-0118-15",
"ProductNDC": "80005-118",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Primidone",
"NonProprietaryName": "Primidone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218366",
"LabelerName": "Carnegie Pharmaceuticals LLC",
"SubstanceName": "PRIMIDONE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2024-07-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240501",
"SamplePackage": "N",
"IndicationAndUsage": "Primidone tablets, used alone or concomitantly with other anticonvulsants, is indicated in the control of grand mal, psychomotor, and focal epileptic seizures. It may control grand mal seizures refractory to other anticonvulsant therapy.",
"Description": "Chemical name: 5-ethyldihydro-5-phenyl-4,6 (1H, 5H)-pyrimidinedione. Structural formula. Primidone is a white, crystalline, highly stable substance, M.P. 279-284°C. It is poorly soluble in water (60 mg per 100 mL at 37°C) and in most organic solvents. It possesses no acidic properties, in contrast to its barbiturate analog. Primidone Tablets, USP 50 mg and 250 mg contain the following inactive ingredients: lactose monohydrate, NF; magnesium stearate, NF; methyl cellulose, USP; microcrystalline cellulose, NF; purified water, USP; sodium lauryl sulfate, NF; sodium starch glycolate, NF; talc, USP."
},
{
"NDCCode": "80005-119-16",
"PackageDescription": "50 mL in 1 BOTTLE (80005-119-16) ",
"NDC11Code": "80005-0119-16",
"ProductNDC": "80005-119",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Famotidine",
"NonProprietaryName": "Famotidine",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20230810",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217137",
"LabelerName": "Carnegie Pharmaceuticals LLC",
"SubstanceName": "FAMOTIDINE",
"StrengthNumber": "40",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230810",
"SamplePackage": "N",
"IndicationAndUsage": "Famotidine for oral suspension is indicated in adults for the treatment of: 1 active duodenal ulcer (DU)., 2 active gastric ulcer (GU)., 3 symptomatic nonerosive gastroesophageal reflux disease (GERD)., 4 erosive esophagitis due to GERD, diagnosed by biopsy., 5 treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison syndrome, multiple endocrine neoplasias)., 6 reduction of the risk of duodenal ulcer recurrence.",
"Description": "The active ingredient in famotidine for oral suspension USP is a histamine-2 (H2) receptor antagonist. Famotidine is N'-(aminosulfonyl)-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propanimidamide. The empirical formula of famotidine is C8H15N7O2S3 and its molecular weight is 337.45. Its structural formula is. Each 5 mL of famotidine for oral suspension USP when prepared as directed contains 40 mg of famotidine and the following inactive ingredients: anhydrous citric acid, powdered cellulose, sucrose, xanthan gum and banana, cherry and mint flavor. Added as preservatives are methylparaben sodium, propylparaben sodium and sodium benzoate. Famotidine is a white to pale yellowish-white crystalline powder that is freely soluble in dimethyl formamide and glacial acetic acid; slightly soluble in methanol; very slightly soluble in water; and practically insoluble in chloroform, ether and ethyl acetate."
},
{
"NDCCode": "80005-126-25",
"PackageDescription": "280 CAPSULE in 1 BOTTLE (80005-126-25) ",
"NDC11Code": "80005-0126-25",
"ProductNDC": "80005-126",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Balsalazide Disodium",
"NonProprietaryName": "Balsalazide Disodium",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20250630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219422",
"LabelerName": "Carnegie Pharmaceuticals, LLC",
"SubstanceName": "BALSALAZIDE DISODIUM",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminosalicylate [EPC], Aminosalicylic Acids [CS]",
"Status": "Active",
"LastUpdate": "2025-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250630",
"SamplePackage": "N",
"IndicationAndUsage": "Balsalazide disodium capsules are indicated for the treatment of mildly to moderately active ulcerative colitis in patients 5 years of age and older. Limitations of Use. Safety and effectiveness of balsalazide disodium capsules beyond 8 weeks in pediatric patients 5 years to 17 years of age and 12 weeks in adults have not been established.",
"Description": "Each Balsalazide Disodium Capsules, USP contains 750 mg of balsalazide disodium, a prodrug that is enzymatically cleaved in the colon to produce mesalamine (5-aminosalicylic acid or 5-ASA), an aminosalicylate. Each capsule of balsalazide disodium (750 mg) is equivalent to 267 mg of mesalamine. Balsalazide disodium has the chemical name (E)-5-[[-4-[[(2-carboxyethyl)amino]carbonyl]phenyl]azo]-2-hydroxybenzoic acid, disodium salt, dihydrate. Its structural formula is. Molecular Weight: 437.32. Molecular Formula: C17H13N3O6Na2 ●2H2O. Balsalazide disodium is a stable orange to yellow crystalline powder. It is freely soluble in water and isotonic saline, sparingly soluble in methanol and ethanol and practically insoluble in all other organic solvents. Inactive Ingredients: Each hard gelatin capsule contains colloidal silicon dioxide and magnesium stearate. Additionally, the capsule shell contains gelatin, titanium dioxide, iron oxide yellow, and iron oxide red. The black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide and water. The sodium content of each capsule is approximately 78.89 mg/ capsule (10.51%)."
},
{
"NDCCode": "80005-128-08",
"PackageDescription": "30 TABLET in 1 BOTTLE (80005-128-08) ",
"NDC11Code": "80005-0128-08",
"ProductNDC": "80005-128",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aminocaproic Acid",
"NonProprietaryName": "Aminocaproic Acid",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20210315",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213928",
"LabelerName": "Carnegie Pharmaceuticals, LLC",
"SubstanceName": "AMINOCAPROIC ACID",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antifibrinolytic Agent [EPC], Decreased Fibrinolysis [PE]",
"Status": "Active",
"LastUpdate": "2023-04-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210315",
"SamplePackage": "N",
"IndicationAndUsage": "Aminocaproic acid is useful in enhancing hemostasis when fibrinolysis contributes to bleeding. In life- threatening situations, transfusion of appropriate blood products and other emergency measures may be required. Fibrinolytic bleeding may frequently be associated with surgical complications following heart surgery (with or without cardiac bypass procedures) and portacaval shunt; hematological disorders such as amegakaryocytic thrombocytopenia (accompanying aplastic anemia); acute and life-threatening abruptio placentae; hepatic cirrhosis; and neoplastic disease such as carcinoma of the prostate, lung, stomach, and cervix. Urinary fibrinolysis, usualIy a normal physiological phenomenon, may contribute to excessive urinary tract fibrinolytic bleeding associated with surgical hematuria (following prostatectomy and nephrectomy) or nonsurgical hematuria (accompanying polycystic or neoplastic diseases of the genitourinary system). (See WARNINGS.).",
"Description": "Aminocaproic acid, USP is 6-aminohexanoic acid, which acts as an inhibitor of fibrinolysis. Its chemical structure is. Aminocaproic acid, USP is soluble in water, acid, and alkaline solutions; it is sparingly soluble in methanol and practically insoluble in chloroform. Each Aminocaproic Acid Tablet, for oral administration contains 500 mg or 1000 mg of aminocaproic acid and the following inactive ingredients: crospovidone, magnesium stearate, povidone and stearic acid."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>80005-153-34</NDCCode>
<PackageDescription>200 mL in 1 BOTTLE (80005-153-34) </PackageDescription>
<NDC11Code>80005-0153-34</NDC11Code>
<ProductNDC>80005-153</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>E.e.s</ProprietaryName>
<NonProprietaryName>Erythromycin Ethylsuccinate</NonProprietaryName>
<DosageFormName>GRANULE, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250115</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050207</ApplicationNumber>
<LabelerName>Carnegie Pharmaceuticals LLC</LabelerName>
<SubstanceName>ERYTHROMYCIN ETHYLSUCCINATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Macrolide Antimicrobial [EPC], Macrolide [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of E.E.S. and other antibacterial drugs, E.E.S. should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. E.E.S. is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the diseases listed below. Upper respiratory tract infections of mild to moderate degree caused by Streptococcus pyogenes, Streptococcus pneumoniae, or Haemophilus influenzae (when used concomitantly with adequate doses of sulfonamides, since many strains of H. influenzae are not susceptible to the erythromycin concentrations ordinarily achieved). (See appropriate sulfonamide labeling for prescribing information.). Lower-respiratory tract infections of mild to moderate severity caused by Streptococcus pneumoniae or Streptococcus pyogenes. Listeriosis caused by Listeria monocytogenes. Pertussis (whooping cough) caused by Bordetella pertussis. Erythromycin is effective in eliminating the organism from the nasopharynx of infected individuals rendering them noninfectious. Some clinical studies suggest that erythromycin may be helpful in the prophylaxis of pertussis in exposed susceptible individuals. Respiratory tract infections due to Mycoplasma pneumoniae. Skin and skin structure infections of mild to moderate severity caused by Streptococcus pyogenes or Staphylococcus aureus (resistant staphylococci may emerge during treatment). Diphtheria: Infections due to Corynebacterium diphtheriae, as an adjunct to antitoxin, to prevent establishment of carriers and to eradicate the organism in carriers. Erythrasma: In the treatment of infections due to Corynebacterium minutissimum. Intestinal amebiasis caused by Entamoeba histolytica (oral erythromycins only). Extraenteric amebiasis requires treatment with other agents. Acute pelvic inflammatory disease caused by Neisseria gonorrhoeae: As an alternative drug in treatment of acute pelvic inflammatory disease caused by N. gonorrhoeae in female patients with a history of sensitivity to penicillin. Patients should have a serologic test for syphilis before receiving erythromycin as treatment of gonorrhea and a follow-up serologic test for syphilis after 3 months. Syphilis caused by Treponema pallidum: Erythromycin is an alternate choice of treatment for primary syphilis in patients allergic to the penicillins. In treatment of primary syphilis, spinal fluid examinations should be done before treatment and as part of follow-up after therapy. Erythromycins are indicated for the treatment of the following infections caused by Chlamydia trachomatis: conjunctivitis of the newborn, pneumonia of infancy, and urogenital infections during pregnancy. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of uncomplicated urethral, endocervical, or rectal infections in adults due to Chlamydia trachomatis. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of nongonococcal urethritis caused by Ureaplasma urealyticum. Legionnaires' Disease caused by Legionella pneumophila: Although no controlled clinical efficacy studies have been conducted, in vitro and limited preliminary clinical data suggest that erythromycin may be effective in treating Legionnaires' Disease.</IndicationAndUsage>
<Description>Erythromycin is produced by a strain of Saccharopolyspora erythraea (formerly Streptomyces erythraeus) and belongs to the macrolide group of antibiotics. It is basic and readily forms salts with acids. The base, the stearate salt, and the esters are poorly soluble in water. Erythromycin ethylsuccinate is an ester of erythromycin suitable for oral administration. Erythromycin ethylsuccinate is known chemically as erythromycin 2'-(ethylsuccinate). The molecular formula is C43H75NO16 and the molecular weight is 862.06. The structural formula is. E.E.S. Granules are intended for reconstitution with water. Each 5-mL teaspoonful of reconstituted cherry-flavored suspension contains erythromycin ethylsuccinate equivalent to 200 mg of erythromycin. The pleasant tasting, fruit-flavored liquids are supplied ready for oral administration. E.E.S. 200 Liquid: Each 5-mL teaspoonful of fruit-flavored suspension contains erythromycin ethylsuccinate equivalent to 200 mg of erythromycin. E.E.S. 400 Liquid: Each 5-mL teaspoonful of orange-flavored suspension contains erythromycin ethylsuccinate equivalent to 400 mg of erythromycin. Granules and ready-made suspensions are intended primarily for pediatric use but can also be used in adults. E.E.S. 400 film-coated tablets: Each tablet contains erythromycin ethylsuccinate equivalent to 400 mg of erythromycin. The film-coated tablets are intended primarily for adults or older children.</Description>
</NDC>
<NDC>
<NDCCode>80005-141-08</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (80005-141-08) </PackageDescription>
<NDC11Code>80005-0141-08</NDC11Code>
<ProductNDC>80005-141</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rasagiline</ProprietaryName>
<NonProprietaryName>Rasagiline Mesylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201942</ApplicationNumber>
<LabelerName>Carnegie Pharmaceuticals LLC</LabelerName>
<SubstanceName>RASAGILINE MESYLATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Monoamine Oxidase Inhibitor [EPC], Monoamine Oxidase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rasagiline tablets are indicated for the treatment of Parkinson’s disease (PD).</IndicationAndUsage>
<Description>Rasagiline tablets contain rasagiline (as the mesylate), a propargylamine-based drug indicated for the treatment of idiopathic Parkinson’s disease. Rasagiline mesylate is designated chemically as: 1H-Inden-1-amine, 2, 3-dihydro-N-2-propynyl-, (1R)-, methanesulfonate. The empirical formula of rasagiline mesylate is C12H13NCH4SO3 and its molecular weight is 267.34. Its structural formula is. Rasagiline mesylate is a white crystalline powder, freely soluble in methanol and soluble in water. Each rasagiline tablet for oral administration contains 0.5 mg or 1 mg of rasagiline (equivalent to 0.78 mg or 1.56 mg of rasagiline mesylate). Each rasagiline tablet also contains the following inactive ingredients: colloidal silicon dioxide, corn starch, microcrystalline cellulose, pregelatinized starch, stearic acid, and talc.</Description>
</NDC>
<NDC>
<NDCCode>80005-141-10</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (80005-141-10) </PackageDescription>
<NDC11Code>80005-0141-10</NDC11Code>
<ProductNDC>80005-141</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rasagiline</ProprietaryName>
<NonProprietaryName>Rasagiline Mesylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201942</ApplicationNumber>
<LabelerName>Carnegie Pharmaceuticals LLC</LabelerName>
<SubstanceName>RASAGILINE MESYLATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Monoamine Oxidase Inhibitor [EPC], Monoamine Oxidase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rasagiline tablets are indicated for the treatment of Parkinson’s disease (PD).</IndicationAndUsage>
<Description>Rasagiline tablets contain rasagiline (as the mesylate), a propargylamine-based drug indicated for the treatment of idiopathic Parkinson’s disease. Rasagiline mesylate is designated chemically as: 1H-Inden-1-amine, 2, 3-dihydro-N-2-propynyl-, (1R)-, methanesulfonate. The empirical formula of rasagiline mesylate is C12H13NCH4SO3 and its molecular weight is 267.34. Its structural formula is. Rasagiline mesylate is a white crystalline powder, freely soluble in methanol and soluble in water. Each rasagiline tablet for oral administration contains 0.5 mg or 1 mg of rasagiline (equivalent to 0.78 mg or 1.56 mg of rasagiline mesylate). Each rasagiline tablet also contains the following inactive ingredients: colloidal silicon dioxide, corn starch, microcrystalline cellulose, pregelatinized starch, stearic acid, and talc.</Description>
</NDC>
<NDC>
<NDCCode>80005-141-14</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (80005-141-14) </PackageDescription>
<NDC11Code>80005-0141-14</NDC11Code>
<ProductNDC>80005-141</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rasagiline</ProprietaryName>
<NonProprietaryName>Rasagiline Mesylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201942</ApplicationNumber>
<LabelerName>Carnegie Pharmaceuticals LLC</LabelerName>
<SubstanceName>RASAGILINE MESYLATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Monoamine Oxidase Inhibitor [EPC], Monoamine Oxidase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rasagiline tablets are indicated for the treatment of Parkinson’s disease (PD).</IndicationAndUsage>
<Description>Rasagiline tablets contain rasagiline (as the mesylate), a propargylamine-based drug indicated for the treatment of idiopathic Parkinson’s disease. Rasagiline mesylate is designated chemically as: 1H-Inden-1-amine, 2, 3-dihydro-N-2-propynyl-, (1R)-, methanesulfonate. The empirical formula of rasagiline mesylate is C12H13NCH4SO3 and its molecular weight is 267.34. Its structural formula is. Rasagiline mesylate is a white crystalline powder, freely soluble in methanol and soluble in water. Each rasagiline tablet for oral administration contains 0.5 mg or 1 mg of rasagiline (equivalent to 0.78 mg or 1.56 mg of rasagiline mesylate). Each rasagiline tablet also contains the following inactive ingredients: colloidal silicon dioxide, corn starch, microcrystalline cellulose, pregelatinized starch, stearic acid, and talc.</Description>
</NDC>
<NDC>
<NDCCode>80005-142-08</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (80005-142-08) </PackageDescription>
<NDC11Code>80005-0142-08</NDC11Code>
<ProductNDC>80005-142</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rasagiline</ProprietaryName>
<NonProprietaryName>Rasagiline Mesylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201942</ApplicationNumber>
<LabelerName>Carnegie Pharmaceuticals LLC</LabelerName>
<SubstanceName>RASAGILINE MESYLATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Monoamine Oxidase Inhibitor [EPC], Monoamine Oxidase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rasagiline tablets are indicated for the treatment of Parkinson’s disease (PD).</IndicationAndUsage>
<Description>Rasagiline tablets contain rasagiline (as the mesylate), a propargylamine-based drug indicated for the treatment of idiopathic Parkinson’s disease. Rasagiline mesylate is designated chemically as: 1H-Inden-1-amine, 2, 3-dihydro-N-2-propynyl-, (1R)-, methanesulfonate. The empirical formula of rasagiline mesylate is C12H13NCH4SO3 and its molecular weight is 267.34. Its structural formula is. Rasagiline mesylate is a white crystalline powder, freely soluble in methanol and soluble in water. Each rasagiline tablet for oral administration contains 0.5 mg or 1 mg of rasagiline (equivalent to 0.78 mg or 1.56 mg of rasagiline mesylate). Each rasagiline tablet also contains the following inactive ingredients: colloidal silicon dioxide, corn starch, microcrystalline cellulose, pregelatinized starch, stearic acid, and talc.</Description>
</NDC>
<NDC>
<NDCCode>80005-142-10</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (80005-142-10) </PackageDescription>
<NDC11Code>80005-0142-10</NDC11Code>
<ProductNDC>80005-142</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rasagiline</ProprietaryName>
<NonProprietaryName>Rasagiline Mesylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201942</ApplicationNumber>
<LabelerName>Carnegie Pharmaceuticals LLC</LabelerName>
<SubstanceName>RASAGILINE MESYLATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Monoamine Oxidase Inhibitor [EPC], Monoamine Oxidase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rasagiline tablets are indicated for the treatment of Parkinson’s disease (PD).</IndicationAndUsage>
<Description>Rasagiline tablets contain rasagiline (as the mesylate), a propargylamine-based drug indicated for the treatment of idiopathic Parkinson’s disease. Rasagiline mesylate is designated chemically as: 1H-Inden-1-amine, 2, 3-dihydro-N-2-propynyl-, (1R)-, methanesulfonate. The empirical formula of rasagiline mesylate is C12H13NCH4SO3 and its molecular weight is 267.34. Its structural formula is. Rasagiline mesylate is a white crystalline powder, freely soluble in methanol and soluble in water. Each rasagiline tablet for oral administration contains 0.5 mg or 1 mg of rasagiline (equivalent to 0.78 mg or 1.56 mg of rasagiline mesylate). Each rasagiline tablet also contains the following inactive ingredients: colloidal silicon dioxide, corn starch, microcrystalline cellulose, pregelatinized starch, stearic acid, and talc.</Description>
</NDC>
<NDC>
<NDCCode>80005-142-14</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (80005-142-14) </PackageDescription>
<NDC11Code>80005-0142-14</NDC11Code>
<ProductNDC>80005-142</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rasagiline</ProprietaryName>
<NonProprietaryName>Rasagiline Mesylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201942</ApplicationNumber>
<LabelerName>Carnegie Pharmaceuticals LLC</LabelerName>
<SubstanceName>RASAGILINE MESYLATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Monoamine Oxidase Inhibitor [EPC], Monoamine Oxidase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rasagiline tablets are indicated for the treatment of Parkinson’s disease (PD).</IndicationAndUsage>
<Description>Rasagiline tablets contain rasagiline (as the mesylate), a propargylamine-based drug indicated for the treatment of idiopathic Parkinson’s disease. Rasagiline mesylate is designated chemically as: 1H-Inden-1-amine, 2, 3-dihydro-N-2-propynyl-, (1R)-, methanesulfonate. The empirical formula of rasagiline mesylate is C12H13NCH4SO3 and its molecular weight is 267.34. Its structural formula is. Rasagiline mesylate is a white crystalline powder, freely soluble in methanol and soluble in water. Each rasagiline tablet for oral administration contains 0.5 mg or 1 mg of rasagiline (equivalent to 0.78 mg or 1.56 mg of rasagiline mesylate). Each rasagiline tablet also contains the following inactive ingredients: colloidal silicon dioxide, corn starch, microcrystalline cellulose, pregelatinized starch, stearic acid, and talc.</Description>
</NDC>
<NDC>
<NDCCode>10096-0238-1</NDCCode>
<PackageDescription>237 mL in 1 BOTTLE, DISPENSING (10096-0238-1)</PackageDescription>
<NDC11Code>10096-0238-01</NDC11Code>
<ProductNDC>10096-0238</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Mommy Tillia</ProprietaryName>
<ProprietaryNameSuffix>Antibacterial Hand</ProprietaryNameSuffix>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20101220</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333E</ApplicationNumber>
<LabelerName>Avon Products, Inc.</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>153.34</StrengthNumber>
<StrengthUnit>mL/237mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Uses: 1 for handwashing to decrease bacteria on the skin.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>54575-153-02</NDCCode>
<PackageDescription>2 mL in 1 VIAL, MULTI-DOSE (54575-153-02)</PackageDescription>
<NDC11Code>54575-0153-02</NDC11Code>
<ProductNDC>54575-153</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>3-ragweed Mix, Giant/short/western Pollen</ProprietaryName>
<NonProprietaryName>Ambrosia Psilostachya Pollen And Ambrosia Trifida Pollen And Ambrosia Artemisiifolia Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19671207</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101376</ApplicationNumber>
<LabelerName>Allergy Laboratories, Inc.</LabelerName>
<SubstanceName>AMBROSIA PSILOSTACHYA POLLEN; AMBROSIA TRIFIDA POLLEN; AMBROSIA ARTEMISIIFOLIA POLLEN</SubstanceName>
<StrengthNumber>.33; .33; .34</StrengthNumber>
<StrengthUnit>g/20mL; g/20mL; g/20mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
</NDC>
<NDC>
<NDCCode>54575-153-10</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (54575-153-10)</PackageDescription>
<NDC11Code>54575-0153-10</NDC11Code>
<ProductNDC>54575-153</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>3-ragweed Mix, Giant/short/western Pollen</ProprietaryName>
<NonProprietaryName>Ambrosia Psilostachya Pollen And Ambrosia Trifida Pollen And Ambrosia Artemisiifolia Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19671207</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101376</ApplicationNumber>
<LabelerName>Allergy Laboratories, Inc.</LabelerName>
<SubstanceName>AMBROSIA PSILOSTACHYA POLLEN; AMBROSIA TRIFIDA POLLEN; AMBROSIA ARTEMISIIFOLIA POLLEN</SubstanceName>
<StrengthNumber>.33; .33; .34</StrengthNumber>
<StrengthUnit>g/20mL; g/20mL; g/20mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
</NDC>
<NDC>
<NDCCode>54575-153-30</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (54575-153-30)</PackageDescription>
<NDC11Code>54575-0153-30</NDC11Code>
<ProductNDC>54575-153</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>3-ragweed Mix, Giant/short/western Pollen</ProprietaryName>
<NonProprietaryName>Ambrosia Psilostachya Pollen And Ambrosia Trifida Pollen And Ambrosia Artemisiifolia Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19671207</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101376</ApplicationNumber>
<LabelerName>Allergy Laboratories, Inc.</LabelerName>
<SubstanceName>AMBROSIA PSILOSTACHYA POLLEN; AMBROSIA TRIFIDA POLLEN; AMBROSIA ARTEMISIIFOLIA POLLEN</SubstanceName>
<StrengthNumber>.33; .33; .34</StrengthNumber>
<StrengthUnit>g/20mL; g/20mL; g/20mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
</NDC>
<NDC>
<NDCCode>54575-153-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (54575-153-50)</PackageDescription>
<NDC11Code>54575-0153-50</NDC11Code>
<ProductNDC>54575-153</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>3-ragweed Mix, Giant/short/western Pollen</ProprietaryName>
<NonProprietaryName>Ambrosia Psilostachya Pollen And Ambrosia Trifida Pollen And Ambrosia Artemisiifolia Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19671207</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101376</ApplicationNumber>
<LabelerName>Allergy Laboratories, Inc.</LabelerName>
<SubstanceName>AMBROSIA PSILOSTACHYA POLLEN; AMBROSIA TRIFIDA POLLEN; AMBROSIA ARTEMISIIFOLIA POLLEN</SubstanceName>
<StrengthNumber>.33; .33; .34</StrengthNumber>
<StrengthUnit>g/20mL; g/20mL; g/20mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
</NDC>
<NDC>
<NDCCode>68382-711-64</NDCCode>
<PackageDescription>34 TABLET, DELAYED RELEASE in 1 BOTTLE (68382-711-64) </PackageDescription>
<NDC11Code>68382-0711-64</NDC11Code>
<ProductNDC>68382-711</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mesalamine</ProprietaryName>
<NonProprietaryName>Mesalamine</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170619</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091640</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>MESALAMINE</SubstanceName>
<StrengthNumber>1.2</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Aminosalicylate [EPC], Aminosalicylic Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170619</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mesalamine delayed-release tablets are indicated for the: : 1 induction and maintenance of remission in adult patients with mildly to moderately active ulcerative colitis., 2 treatment of mildly to moderately active ulcerative colitis in pediatric patients weighing at least 24 kg.</IndicationAndUsage>
<Description>Each mesalamine delayed-release tablet for oral administration contains 1.2 g. 5-aminosalicylic acid (5-ASA; mesalamine), an anti-inflammatory agent. Mesalamine also has the chemical name 5-amino-2-hydroxybenzoic acid and its structural formula is:. Molecular formula: C7H7NO3. Molecular weight: 153.14. Mesalamine, USP is a light tan to pink colored, needle-shaped crystals. Color may darken on exposure to air. It is odorless or may have a slight characteristic odor. The tablet is coated with a pH-dependent polymer film, which breaks down at or above pH 6.8, normally in the terminal ileum where mesalamine then begins to be released from the tablet core. The tablet core contains mesalamine with hydrophilic excipients and provides for extended release of mesalamine. Each mesalamine delayed-release tablet, USP intended for oral administration contains 1.2 g of mesalamine. In addition, each tablet contains the following inactive ingredients: carboxymethylcellulose sodium, colloidal silicon dioxide, hypromellose, iron oxide red, iron oxide yellow, magnesium stearate, methacrylic acid copolymer, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, triethyl citrate, talc and titanium dioxide. The Product meets USP Dissolution Test 4.</Description>
</NDC>
<NDC>
<NDCCode>72189-153-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (72189-153-30) </PackageDescription>
<NDC11Code>72189-0153-30</NDC11Code>
<ProductNDC>72189-153</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ramelteon</ProprietaryName>
<NonProprietaryName>Ramelteon</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201103</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211567</ApplicationNumber>
<LabelerName>DIRECT RX</LabelerName>
<SubstanceName>RAMELTEON</SubstanceName>
<StrengthNumber>8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Melatonin Receptor Agonist [EPC], Melatonin Receptor Agonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201103</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ramelteon tablets are indicated for the treatment of insomnia characterized by difficulty with sleep onset. The clinical trials performed in support of efficacy were up to six months in duration. The final formal assessments of sleep latency were performed after two days of treatment during the crossover study (elderly only), at five weeks in the six week studies (adults and elderly), and at the end of the six month study (adults and elderly) [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Ramelteon is an orally active hypnotic chemically designated as (S)-N-[2-(1, 6, 7, 8 tetrahydro-2H-indeno-[5, 4-b]furan-8-yl)ethyl]propionamide and containing one chiral center. The compound is produced as the (S)-enantiomer, with an molecular formula of C16H21NO2, molecular weight of 259.34, and the following chemical structure. [Image]. Ramelteon is a white to cream color powder and it is freely soluble in methanol and practically insoluble in water. Each film-coated tablet contains 8 mg ramelteon and contains following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, ferrosoferric oxide, hypromellose, iron oxide red, iron oxide yellow, polyethylene glycol, povidone, pregelatinized starch (botanical source: maize), sodium stearyl fumarate, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>72789-153-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (72789-153-30) </PackageDescription>
<NDC11Code>72789-0153-30</NDC11Code>
<ProductNDC>72789-153</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190208</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211933</ApplicationNumber>
<LabelerName>PD-Rx Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated: 1 To reduce the risk of:, 2 Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHD, 3 MI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHD, 4 Non-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD, 5 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in:, 6 Adults with primary hyperlipidemia., 7 Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH)., 8 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH)., 9 As an adjunct to diet for the treatment of adults with:, 10 Primary dysbetalipoproteinemia, 11 Hypertriglyceridemia.</IndicationAndUsage>
<Description>Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium USP is (βR, δR)-2-(p-fluorophenyl)-β,δ-dihydroxy-5-isopropyl-3-phenyl-4(phenylcarbamoyl)pyrrole-l-heptanaote (1:2), trihydrate. The molecular formula of atorvastatin calcium USP is C 66H 68CaF 2N 4O 10.3H 2O and its molecular weight is 1209.41. Its structural formula is:. Atorvastatin calcium USP is a white to off-white crystalline powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium USP is soluble to freely soluble in methanol, slightly soluble in alcohol, insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer, and in acetonitrile. Atorvastatin calcium tablets, USP for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.34 mg, 20.68 mg, 41.36 mg, or 82.73 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, magnesium aluminometasilicate, microcrystalline cellulose, polysorbate 80, precipitated calcium carbonate, polyvinyl alcohol, titanium dioxide, talc, polyethylene glycol and lecithin.</Description>
</NDC>
<NDC>
<NDCCode>80803-153-50</NDCCode>
<PackageDescription>1 VIAL, SINGLE-USE in 1 CARTON (80803-153-50) / 20 mL in 1 VIAL, SINGLE-USE</PackageDescription>
<NDC11Code>80803-0153-50</NDC11Code>
<ProductNDC>80803-153</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fyarro</ProprietaryName>
<NonProprietaryName>Sirolimus</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SUSPENSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20211206</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA213312</ApplicationNumber>
<LabelerName>Aadi Bioscience, Inc.</LabelerName>
<SubstanceName>SIROLIMUS</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Immunologic Activity [PE], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA], mTOR Inhibitor Immunosuppressant [EPC], mTOR Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>FYARRO® is indicated for the treatment of adult patients with locally advanced unresectable or metastatic malignant perivascular epithelioid cell tumor (PEComa).</IndicationAndUsage>
<Description>FYARRO (sirolimus protein-bound particles for injectable suspension) (albumin-bound) is sirolimus formulated as albumin-bound nanoparticles. The active ingredient in FYARRO is sirolimus bound to albumin which exists in the nanoparticles in a non-crystalline, amorphous state. Sirolimus is a mechanistic target of rapamycin kinase (mTOR) inhibitor. Sirolimus is a macrocyclic lactone produced by Streptomyces hygroscopicus. The chemical name of sirolimus is [3S[3R*[S*(1R*,3S*,4S*)),6S*,7E,9S*,10S*,12S*,14R*,15E,17E,19E,21R*,23R*,26S*, 27S*,3 4aR*]]9,10,12,13,14,21,22,23,24,25,26,27,32,33,34,34a-Hexadecahydro-9,27-dihydroxy 3-[2-(4-hydroxy-3methoxycyclohexyl)-1-methylethyl]-10,21-dimethoxy-6,8,12,14,20,26-hexamethyl-23,27-epoxy-3Hpyrido[2,1-c][1,4]oxaazacyclohentriacontine-1,5,11,28,29(4H,6H,31H)-pentone. Its empirical formula is C51H79NO13, and the molecular weight is 914.2. The structural formula of sirolimus is illustrated as follows:. Sirolimus is a white to off-white crystalline powder and is insoluble in water but freely soluble in benzyl alcohol, chloroform, acetone, and acetonitrile. FYARRO is supplied as a white to yellow, sterile, lyophilized powder for reconstitution with 20 mL of 0.9% Sodium Chloride Injection, USP prior to intravenous infusion. Each single-dose vial contains 100 mg of sirolimus (bound to human albumin) and approximately 850 mg of human albumin (containing sodium caprylate and sodium acetyltryptophanate). Each milliliter (mL) of reconstituted suspension contains 5 mg sirolimus formulated as albumin-bound particles.</Description>
</NDC>
<NDC>
<NDCCode>80005-112-12</NDCCode>
<PackageDescription>120 TABLET in 1 BOTTLE (80005-112-12) </PackageDescription>
<NDC11Code>80005-0112-12</NDC11Code>
<ProductNDC>80005-112</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Etravirine</ProprietaryName>
<NonProprietaryName>Etravirine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220607</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215402</ApplicationNumber>
<LabelerName>Carnegie Pharmaceuticals LLC</LabelerName>
<SubstanceName>ETRAVIRINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Human Immunodeficiency Virus 1 Non-Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Non-Nucleoside Analog [EXT], Non-Nucleoside Reverse Transcriptase Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220607</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Etravirine, in combination with other antiretroviral agents, is indicated for the treatment of human immunodeficiency virus type 1 (HIV-1) infection in antiretroviral treatment-experienced adult patients and pediatric patients 2 years of age and older [see Microbiology (12.4) and Clinical Studies (14)].</IndicationAndUsage>
<Description>Etravirine is a non-nucleoside reverse transcriptase inhibitor (NNRTI) of human immunodeficiency virus type 1 (HIV-1). The chemical name for etravirine is 4-[[6-amino-5-bromo-2-[(4-cyanophenyl)amino]-4- pyrimidinyl]oxy]-3,5-dimethylbenzonitrile. Its molecular formula is C20H15BrN6O and its molecular weight is 435.28. Etravirine has the following structural formula. Etravirine is a white to slightly yellowish-brown powder. Etravirine is practically insoluble in water over a wide pH range. It is very slightly soluble in propylene glycol and slightly soluble in ethanol. Etravirine is soluble in polyethylene glycol (PEG)400 and freely soluble in some organic solvents (e.g., N,N-dimethylformamide and tetrahydrofuran). Etravirine 100 mg tablets are available as white to off-white, oval tablets for oral administration. Each 100 mg tablet contains 100 mg of etravirine and the inactive ingredients povidone, microcrystalline cellulose, sodium lauryl sulfate, crospovidone, sodium starch glycolate, silicon dioxide and magnesium stearate. Etravirine 200 mg tablets are available as white to off-white, oval tables for oral administration. Each 200 mg tablet contains 200 mg of etravirine and the inactive ingredients povidone, microcrystalline cellulose, sodium lauryl sulfate, crospovidone, sodium starch glycolate, silicon dioxide and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>80005-113-09</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (80005-113-09) </PackageDescription>
<NDC11Code>80005-0113-09</NDC11Code>
<ProductNDC>80005-113</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Etravirine</ProprietaryName>
<NonProprietaryName>Etravirine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220607</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215402</ApplicationNumber>
<LabelerName>Carnegie Pharmaceuticals LLC</LabelerName>
<SubstanceName>ETRAVIRINE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Human Immunodeficiency Virus 1 Non-Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Non-Nucleoside Analog [EXT], Non-Nucleoside Reverse Transcriptase Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220607</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Etravirine, in combination with other antiretroviral agents, is indicated for the treatment of human immunodeficiency virus type 1 (HIV-1) infection in antiretroviral treatment-experienced adult patients and pediatric patients 2 years of age and older [see Microbiology (12.4) and Clinical Studies (14)].</IndicationAndUsage>
<Description>Etravirine is a non-nucleoside reverse transcriptase inhibitor (NNRTI) of human immunodeficiency virus type 1 (HIV-1). The chemical name for etravirine is 4-[[6-amino-5-bromo-2-[(4-cyanophenyl)amino]-4- pyrimidinyl]oxy]-3,5-dimethylbenzonitrile. Its molecular formula is C20H15BrN6O and its molecular weight is 435.28. Etravirine has the following structural formula. Etravirine is a white to slightly yellowish-brown powder. Etravirine is practically insoluble in water over a wide pH range. It is very slightly soluble in propylene glycol and slightly soluble in ethanol. Etravirine is soluble in polyethylene glycol (PEG)400 and freely soluble in some organic solvents (e.g., N,N-dimethylformamide and tetrahydrofuran). Etravirine 100 mg tablets are available as white to off-white, oval tablets for oral administration. Each 100 mg tablet contains 100 mg of etravirine and the inactive ingredients povidone, microcrystalline cellulose, sodium lauryl sulfate, crospovidone, sodium starch glycolate, silicon dioxide and magnesium stearate. Etravirine 200 mg tablets are available as white to off-white, oval tables for oral administration. Each 200 mg tablet contains 200 mg of etravirine and the inactive ingredients povidone, microcrystalline cellulose, sodium lauryl sulfate, crospovidone, sodium starch glycolate, silicon dioxide and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>80005-114-02</NDCCode>
<PackageDescription>5 CAPSULE in 1 BOTTLE (80005-114-02) </PackageDescription>
<NDC11Code>80005-0114-02</NDC11Code>
<ProductNDC>80005-114</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lomustine</ProprietaryName>
<NonProprietaryName>Lomustine</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20251110</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219265</ApplicationNumber>
<LabelerName>Carnegie Pharmaceuticals LLC</LabelerName>
<SubstanceName>LOMUSTINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA], Alkylating Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251110</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Lomustine Capsules, USP (lomustine) is an alkylating drug for oral administration. The chemical name for lomustine is 1-(2-chloro-ethyl)-3-cyclohexyl-1-nitrosourea and the molecular formula is C9H16ClN3O2. The molecular weight is 233.71. Lomustine is a yellow powder, which is soluble in 10% ethanol (0.05 mg per mL) and in absolute alcohol (70 mg per mL). Lomustine is insoluble in water (<0.05 mg per mL). The chemical structure is. Lomustine Capsules, USP are supplied as 10 mg, 40 mg, and 100 mg capsules and contain the following inactive ingredients: magnesium stearate NF and mannitol USP. The 10 mg capsule shells are composed of gelatin and titanium dioxide. The 40 mg and 100 mg capsule shells are composed of FD&C blue #1, gelatin, iron oxide black, iron oxide yellow, and titanium dioxide. The capsules are printed with black ink composed of iron oxide black, potassium hydroxide, propylene glycol, shellac, and strong ammonia solution. FDA approved dissolution method is not listed in the USP Monograph for Lomustine Capsules, USP, 10 mg, 40 mg, and 100 mg.</Description>
</NDC>
<NDC>
<NDCCode>80005-115-02</NDCCode>
<PackageDescription>5 CAPSULE in 1 BOTTLE (80005-115-02) </PackageDescription>
<NDC11Code>80005-0115-02</NDC11Code>
<ProductNDC>80005-115</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lomustine</ProprietaryName>
<NonProprietaryName>Lomustine</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20251110</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219265</ApplicationNumber>
<LabelerName>Carnegie Pharmaceuticals LLC</LabelerName>
<SubstanceName>LOMUSTINE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA], Alkylating Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251110</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Lomustine Capsules, USP (lomustine) is an alkylating drug for oral administration. The chemical name for lomustine is 1-(2-chloro-ethyl)-3-cyclohexyl-1-nitrosourea and the molecular formula is C9H16ClN3O2. The molecular weight is 233.71. Lomustine is a yellow powder, which is soluble in 10% ethanol (0.05 mg per mL) and in absolute alcohol (70 mg per mL). Lomustine is insoluble in water (<0.05 mg per mL). The chemical structure is. Lomustine Capsules, USP are supplied as 10 mg, 40 mg, and 100 mg capsules and contain the following inactive ingredients: magnesium stearate NF and mannitol USP. The 10 mg capsule shells are composed of gelatin and titanium dioxide. The 40 mg and 100 mg capsule shells are composed of FD&C blue #1, gelatin, iron oxide black, iron oxide yellow, and titanium dioxide. The capsules are printed with black ink composed of iron oxide black, potassium hydroxide, propylene glycol, shellac, and strong ammonia solution. FDA approved dissolution method is not listed in the USP Monograph for Lomustine Capsules, USP, 10 mg, 40 mg, and 100 mg.</Description>
</NDC>
<NDC>
<NDCCode>80005-116-02</NDCCode>
<PackageDescription>5 CAPSULE in 1 BOTTLE (80005-116-02) </PackageDescription>
<NDC11Code>80005-0116-02</NDC11Code>
<ProductNDC>80005-116</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lomustine</ProprietaryName>
<NonProprietaryName>Lomustine</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20251110</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219265</ApplicationNumber>
<LabelerName>Carnegie Pharmaceuticals LLC</LabelerName>
<SubstanceName>LOMUSTINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA], Alkylating Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251110</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Lomustine Capsules, USP (lomustine) is an alkylating drug for oral administration. The chemical name for lomustine is 1-(2-chloro-ethyl)-3-cyclohexyl-1-nitrosourea and the molecular formula is C9H16ClN3O2. The molecular weight is 233.71. Lomustine is a yellow powder, which is soluble in 10% ethanol (0.05 mg per mL) and in absolute alcohol (70 mg per mL). Lomustine is insoluble in water (<0.05 mg per mL). The chemical structure is. Lomustine Capsules, USP are supplied as 10 mg, 40 mg, and 100 mg capsules and contain the following inactive ingredients: magnesium stearate NF and mannitol USP. The 10 mg capsule shells are composed of gelatin and titanium dioxide. The 40 mg and 100 mg capsule shells are composed of FD&C blue #1, gelatin, iron oxide black, iron oxide yellow, and titanium dioxide. The capsules are printed with black ink composed of iron oxide black, potassium hydroxide, propylene glycol, shellac, and strong ammonia solution. FDA approved dissolution method is not listed in the USP Monograph for Lomustine Capsules, USP, 10 mg, 40 mg, and 100 mg.</Description>
</NDC>
<NDC>
<NDCCode>80005-117-11</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (80005-117-11) </PackageDescription>
<NDC11Code>80005-0117-11</NDC11Code>
<ProductNDC>80005-117</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Primidone</ProprietaryName>
<NonProprietaryName>Primidone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218366</ApplicationNumber>
<LabelerName>Carnegie Pharmaceuticals LLC</LabelerName>
<SubstanceName>PRIMIDONE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Primidone tablets, used alone or concomitantly with other anticonvulsants, is indicated in the control of grand mal, psychomotor, and focal epileptic seizures. It may control grand mal seizures refractory to other anticonvulsant therapy.</IndicationAndUsage>
<Description>Chemical name: 5-ethyldihydro-5-phenyl-4,6 (1H, 5H)-pyrimidinedione. Structural formula. Primidone is a white, crystalline, highly stable substance, M.P. 279-284°C. It is poorly soluble in water (60 mg per 100 mL at 37°C) and in most organic solvents. It possesses no acidic properties, in contrast to its barbiturate analog. Primidone Tablets, USP 50 mg and 250 mg contain the following inactive ingredients: lactose monohydrate, NF; magnesium stearate, NF; methyl cellulose, USP; microcrystalline cellulose, NF; purified water, USP; sodium lauryl sulfate, NF; sodium starch glycolate, NF; talc, USP.</Description>
</NDC>
<NDC>
<NDCCode>80005-117-14</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (80005-117-14) </PackageDescription>
<NDC11Code>80005-0117-14</NDC11Code>
<ProductNDC>80005-117</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Primidone</ProprietaryName>
<NonProprietaryName>Primidone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218366</ApplicationNumber>
<LabelerName>Carnegie Pharmaceuticals LLC</LabelerName>
<SubstanceName>PRIMIDONE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Primidone tablets, used alone or concomitantly with other anticonvulsants, is indicated in the control of grand mal, psychomotor, and focal epileptic seizures. It may control grand mal seizures refractory to other anticonvulsant therapy.</IndicationAndUsage>
<Description>Chemical name: 5-ethyldihydro-5-phenyl-4,6 (1H, 5H)-pyrimidinedione. Structural formula. Primidone is a white, crystalline, highly stable substance, M.P. 279-284°C. It is poorly soluble in water (60 mg per 100 mL at 37°C) and in most organic solvents. It possesses no acidic properties, in contrast to its barbiturate analog. Primidone Tablets, USP 50 mg and 250 mg contain the following inactive ingredients: lactose monohydrate, NF; magnesium stearate, NF; methyl cellulose, USP; microcrystalline cellulose, NF; purified water, USP; sodium lauryl sulfate, NF; sodium starch glycolate, NF; talc, USP.</Description>
</NDC>
<NDC>
<NDCCode>80005-117-15</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (80005-117-15) </PackageDescription>
<NDC11Code>80005-0117-15</NDC11Code>
<ProductNDC>80005-117</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Primidone</ProprietaryName>
<NonProprietaryName>Primidone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218366</ApplicationNumber>
<LabelerName>Carnegie Pharmaceuticals LLC</LabelerName>
<SubstanceName>PRIMIDONE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Primidone tablets, used alone or concomitantly with other anticonvulsants, is indicated in the control of grand mal, psychomotor, and focal epileptic seizures. It may control grand mal seizures refractory to other anticonvulsant therapy.</IndicationAndUsage>
<Description>Chemical name: 5-ethyldihydro-5-phenyl-4,6 (1H, 5H)-pyrimidinedione. Structural formula. Primidone is a white, crystalline, highly stable substance, M.P. 279-284°C. It is poorly soluble in water (60 mg per 100 mL at 37°C) and in most organic solvents. It possesses no acidic properties, in contrast to its barbiturate analog. Primidone Tablets, USP 50 mg and 250 mg contain the following inactive ingredients: lactose monohydrate, NF; magnesium stearate, NF; methyl cellulose, USP; microcrystalline cellulose, NF; purified water, USP; sodium lauryl sulfate, NF; sodium starch glycolate, NF; talc, USP.</Description>
</NDC>
<NDC>
<NDCCode>80005-118-11</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (80005-118-11) </PackageDescription>
<NDC11Code>80005-0118-11</NDC11Code>
<ProductNDC>80005-118</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Primidone</ProprietaryName>
<NonProprietaryName>Primidone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218366</ApplicationNumber>
<LabelerName>Carnegie Pharmaceuticals LLC</LabelerName>
<SubstanceName>PRIMIDONE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Primidone tablets, used alone or concomitantly with other anticonvulsants, is indicated in the control of grand mal, psychomotor, and focal epileptic seizures. It may control grand mal seizures refractory to other anticonvulsant therapy.</IndicationAndUsage>
<Description>Chemical name: 5-ethyldihydro-5-phenyl-4,6 (1H, 5H)-pyrimidinedione. Structural formula. Primidone is a white, crystalline, highly stable substance, M.P. 279-284°C. It is poorly soluble in water (60 mg per 100 mL at 37°C) and in most organic solvents. It possesses no acidic properties, in contrast to its barbiturate analog. Primidone Tablets, USP 50 mg and 250 mg contain the following inactive ingredients: lactose monohydrate, NF; magnesium stearate, NF; methyl cellulose, USP; microcrystalline cellulose, NF; purified water, USP; sodium lauryl sulfate, NF; sodium starch glycolate, NF; talc, USP.</Description>
</NDC>
<NDC>
<NDCCode>80005-118-14</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (80005-118-14) </PackageDescription>
<NDC11Code>80005-0118-14</NDC11Code>
<ProductNDC>80005-118</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Primidone</ProprietaryName>
<NonProprietaryName>Primidone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218366</ApplicationNumber>
<LabelerName>Carnegie Pharmaceuticals LLC</LabelerName>
<SubstanceName>PRIMIDONE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Primidone tablets, used alone or concomitantly with other anticonvulsants, is indicated in the control of grand mal, psychomotor, and focal epileptic seizures. It may control grand mal seizures refractory to other anticonvulsant therapy.</IndicationAndUsage>
<Description>Chemical name: 5-ethyldihydro-5-phenyl-4,6 (1H, 5H)-pyrimidinedione. Structural formula. Primidone is a white, crystalline, highly stable substance, M.P. 279-284°C. It is poorly soluble in water (60 mg per 100 mL at 37°C) and in most organic solvents. It possesses no acidic properties, in contrast to its barbiturate analog. Primidone Tablets, USP 50 mg and 250 mg contain the following inactive ingredients: lactose monohydrate, NF; magnesium stearate, NF; methyl cellulose, USP; microcrystalline cellulose, NF; purified water, USP; sodium lauryl sulfate, NF; sodium starch glycolate, NF; talc, USP.</Description>
</NDC>
<NDC>
<NDCCode>80005-118-15</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (80005-118-15) </PackageDescription>
<NDC11Code>80005-0118-15</NDC11Code>
<ProductNDC>80005-118</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Primidone</ProprietaryName>
<NonProprietaryName>Primidone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218366</ApplicationNumber>
<LabelerName>Carnegie Pharmaceuticals LLC</LabelerName>
<SubstanceName>PRIMIDONE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Primidone tablets, used alone or concomitantly with other anticonvulsants, is indicated in the control of grand mal, psychomotor, and focal epileptic seizures. It may control grand mal seizures refractory to other anticonvulsant therapy.</IndicationAndUsage>
<Description>Chemical name: 5-ethyldihydro-5-phenyl-4,6 (1H, 5H)-pyrimidinedione. Structural formula. Primidone is a white, crystalline, highly stable substance, M.P. 279-284°C. It is poorly soluble in water (60 mg per 100 mL at 37°C) and in most organic solvents. It possesses no acidic properties, in contrast to its barbiturate analog. Primidone Tablets, USP 50 mg and 250 mg contain the following inactive ingredients: lactose monohydrate, NF; magnesium stearate, NF; methyl cellulose, USP; microcrystalline cellulose, NF; purified water, USP; sodium lauryl sulfate, NF; sodium starch glycolate, NF; talc, USP.</Description>
</NDC>
<NDC>
<NDCCode>80005-119-16</NDCCode>
<PackageDescription>50 mL in 1 BOTTLE (80005-119-16) </PackageDescription>
<NDC11Code>80005-0119-16</NDC11Code>
<ProductNDC>80005-119</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Famotidine</ProprietaryName>
<NonProprietaryName>Famotidine</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230810</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217137</ApplicationNumber>
<LabelerName>Carnegie Pharmaceuticals LLC</LabelerName>
<SubstanceName>FAMOTIDINE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230810</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Famotidine for oral suspension is indicated in adults for the treatment of: 1 active duodenal ulcer (DU)., 2 active gastric ulcer (GU)., 3 symptomatic nonerosive gastroesophageal reflux disease (GERD)., 4 erosive esophagitis due to GERD, diagnosed by biopsy., 5 treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison syndrome, multiple endocrine neoplasias)., 6 reduction of the risk of duodenal ulcer recurrence.</IndicationAndUsage>
<Description>The active ingredient in famotidine for oral suspension USP is a histamine-2 (H2) receptor antagonist. Famotidine is N'-(aminosulfonyl)-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propanimidamide. The empirical formula of famotidine is C8H15N7O2S3 and its molecular weight is 337.45. Its structural formula is. Each 5 mL of famotidine for oral suspension USP when prepared as directed contains 40 mg of famotidine and the following inactive ingredients: anhydrous citric acid, powdered cellulose, sucrose, xanthan gum and banana, cherry and mint flavor. Added as preservatives are methylparaben sodium, propylparaben sodium and sodium benzoate. Famotidine is a white to pale yellowish-white crystalline powder that is freely soluble in dimethyl formamide and glacial acetic acid; slightly soluble in methanol; very slightly soluble in water; and practically insoluble in chloroform, ether and ethyl acetate.</Description>
</NDC>
<NDC>
<NDCCode>80005-126-25</NDCCode>
<PackageDescription>280 CAPSULE in 1 BOTTLE (80005-126-25) </PackageDescription>
<NDC11Code>80005-0126-25</NDC11Code>
<ProductNDC>80005-126</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Balsalazide Disodium</ProprietaryName>
<NonProprietaryName>Balsalazide Disodium</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250630</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219422</ApplicationNumber>
<LabelerName>Carnegie Pharmaceuticals, LLC</LabelerName>
<SubstanceName>BALSALAZIDE DISODIUM</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminosalicylate [EPC], Aminosalicylic Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250630</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Balsalazide disodium capsules are indicated for the treatment of mildly to moderately active ulcerative colitis in patients 5 years of age and older. Limitations of Use. Safety and effectiveness of balsalazide disodium capsules beyond 8 weeks in pediatric patients 5 years to 17 years of age and 12 weeks in adults have not been established.</IndicationAndUsage>
<Description>Each Balsalazide Disodium Capsules, USP contains 750 mg of balsalazide disodium, a prodrug that is enzymatically cleaved in the colon to produce mesalamine (5-aminosalicylic acid or 5-ASA), an aminosalicylate. Each capsule of balsalazide disodium (750 mg) is equivalent to 267 mg of mesalamine. Balsalazide disodium has the chemical name (E)-5-[[-4-[[(2-carboxyethyl)amino]carbonyl]phenyl]azo]-2-hydroxybenzoic acid, disodium salt, dihydrate. Its structural formula is. Molecular Weight: 437.32. Molecular Formula: C17H13N3O6Na2 ●2H2O. Balsalazide disodium is a stable orange to yellow crystalline powder. It is freely soluble in water and isotonic saline, sparingly soluble in methanol and ethanol and practically insoluble in all other organic solvents. Inactive Ingredients: Each hard gelatin capsule contains colloidal silicon dioxide and magnesium stearate. Additionally, the capsule shell contains gelatin, titanium dioxide, iron oxide yellow, and iron oxide red. The black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide and water. The sodium content of each capsule is approximately 78.89 mg/ capsule (10.51%).</Description>
</NDC>
<NDC>
<NDCCode>80005-128-08</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (80005-128-08) </PackageDescription>
<NDC11Code>80005-0128-08</NDC11Code>
<ProductNDC>80005-128</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aminocaproic Acid</ProprietaryName>
<NonProprietaryName>Aminocaproic Acid</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210315</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213928</ApplicationNumber>
<LabelerName>Carnegie Pharmaceuticals, LLC</LabelerName>
<SubstanceName>AMINOCAPROIC ACID</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antifibrinolytic Agent [EPC], Decreased Fibrinolysis [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-04-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210315</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Aminocaproic acid is useful in enhancing hemostasis when fibrinolysis contributes to bleeding. In life- threatening situations, transfusion of appropriate blood products and other emergency measures may be required. Fibrinolytic bleeding may frequently be associated with surgical complications following heart surgery (with or without cardiac bypass procedures) and portacaval shunt; hematological disorders such as amegakaryocytic thrombocytopenia (accompanying aplastic anemia); acute and life-threatening abruptio placentae; hepatic cirrhosis; and neoplastic disease such as carcinoma of the prostate, lung, stomach, and cervix. Urinary fibrinolysis, usualIy a normal physiological phenomenon, may contribute to excessive urinary tract fibrinolytic bleeding associated with surgical hematuria (following prostatectomy and nephrectomy) or nonsurgical hematuria (accompanying polycystic or neoplastic diseases of the genitourinary system). (See WARNINGS.).</IndicationAndUsage>
<Description>Aminocaproic acid, USP is 6-aminohexanoic acid, which acts as an inhibitor of fibrinolysis. Its chemical structure is. Aminocaproic acid, USP is soluble in water, acid, and alkaline solutions; it is sparingly soluble in methanol and practically insoluble in chloroform. Each Aminocaproic Acid Tablet, for oral administration contains 500 mg or 1000 mg of aminocaproic acid and the following inactive ingredients: crospovidone, magnesium stearate, povidone and stearic acid.</Description>
</NDC>
</NDCList>