{
"NDC": [
{
"NDCCode": "80005-155-18",
"PackageDescription": "100 mL in 1 BOTTLE (80005-155-18) ",
"NDC11Code": "80005-0155-18",
"ProductNDC": "80005-155",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ery-ped",
"NonProprietaryName": "Erythromycin Ethylsuccinate",
"DosageFormName": "SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20250115",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050207",
"LabelerName": "Carnegie Pharmaceuticals LLC",
"SubstanceName": "ERYTHROMYCIN ETHYLSUCCINATE",
"StrengthNumber": "400",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE], Macrolide Antimicrobial [EPC], Macrolide [EPC], Macrolides [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250115",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ery-Ped and other antibacterial drugs, Ery-Ped should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Ery-Ped is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the diseases listed below. Upper respiratory tract infections of mild to moderate degree caused by Streptococcus pyogenes, Streptococcus pneumoniae, or Haemophilus influenzae (when used concomitantly with adequate doses of sulfonamides, since many strains of H. influenzae are not susceptible to the erythromycin concentrations ordinarily achieved). (See appropriate sulfonamide labeling for prescribing information.). Lower-respiratory tract infections of mild to moderate severity caused by Streptococcus pneumoniae or Streptococcus pyogenes. Listeriosis caused by Listeria monocytogenes. Pertussis (whooping cough) caused by Bordetella pertussis. Erythromycin is effective in eliminating the organism from the nasopharynx of infectedindividuals rendering them noninfectious. Some clinical studies suggest that erythromycin may be helpful in the prophylaxis of pertussis in exposedsusceptible individuals. Respiratory tract infections due to Mycoplasma pneumoniae. Skin and skin structure infections of mild to moderate severity caused by Streptococcus pyogenes or Staphylococcus aureus (resistant staphylococci may emerge during treatment). Diphtheria: Infections due to Corynebacterium diphtheriae, as an adjunct to antitoxin, to prevent establishment of carriers and to eradicate the organism in carriers. Erythrasma: In the treatment of infections due to Corynebacterium minutissimum. Intestinal amebiasis caused by Entamoeba histolytica (oral erythromycins only). Extraenteric amebiasis requires treatment with other agents. Acute Pelvic Inflammatory Disease caused by Neisseria gonorrhoeae: As an alternative drug in treatment of acute pelvic inflammatory disease caused by N. gonorrhoeae in female patients with a history of sensitivity to penicillin. Patients should have a serologic test for syphilis before receiving erythromycin as treatment of gonorrhea and a follow-up serologic test for syphilis after 3 months. Syphilis caused by Treponema pallidum: Erythromycin is an alternate choice of treatment for primary syphilis in penicillin-allergic patients. In primary syphilis, spinal fluid examinations should be done before treatment and as part of follow-up after therapy. Erythromycins are indicated for the treatment of the following infections caused by Chlamydia trachomatis: Conjunctivitis of the newborn, pneumonia of infancy, and urogenital infections during pregnancy. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of uncomplicated urethral, endocervical, or rectal infections in adults due to Chlamydia trachomatis. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of nongonococcal urethritis caused by Ureaplasma urealyticum. Legionnaires’ Disease caused by Legionella pneumophila: Although no controlled clinical efficacy studies have been conducted, in vitro and limitedpreliminary clinical data suggest that erythromycin may be effective in treating Legionnaires’ Disease. Prophylaxis. Prevention of Initial Attacks of Rheumatic Fever: Penicillin is considered by the American Heart Association to be the drug of choice in the prevention of initial attacks of rheumatic fever (treatment of Streptococcus pyogenes infections of the upper respiratory tract, e.g., tonsillitis or pharyngitis). Erythromycin is indicated for the treatment of penicillin-allergic patients.1 The therapeutic dose should be administered for 10 days. Prevention of Recurrent Attacks of Rheumatic Fever: Penicillin or sulfonamides are considered by the American Heart Association to be the drugs of choice in the prevention of recurrent attacks of rheumatic fever. In patients who are allergic to penicillin and sulfonamides, oral erythromycin is recommended by the American Heart Association in the long-term prophylaxis of Streptococcal pharyngitis (for the prevention of recurrent attacks of rheumatic fever).1.",
"Description": "Erythromycin is produced by a strain of Saccharopolyspora erythraea (formerly Streptomyces erythraeus) and belongs to the macrolide group of antibiotics. It is basic and readily forms salts with acids. The base, the stearate salt, and the esters are poorly soluble in water. Erythromycin ethylsuccinate is an ester of erythromycin suitable for oral administration. Erythromycin ethylsuccinate is known chemically as erythromycin 2'-(ethyl succinate). The molecular formula is C43H75NO16 and the molecular weight is 862.06. The structural formula is. Ery-Ped 200 (erythromycin ethylsuccinate for oral suspension) when reconstituted with water, forms a suspension containing erythromycin ethylsuccinate equivalent to 200 mg erythromycin per 5 mL (teaspoonful) or 100 mg per 2.5 mL (dropperful) with an appealing fruit flavor. Ery-Ped 400 when reconstituted with water, forms a suspension containing erythromycin ethylsuccinate equivalent to 400 mg of erythromycin per 5 mL (teaspoonful) with an appealing banana flavor. These products are intended primarily for pediatric use but can also be used in adults."
},
{
"NDCCode": "80005-152-18",
"PackageDescription": "100 mL in 1 BOTTLE (80005-152-18) ",
"NDC11Code": "80005-0152-18",
"ProductNDC": "80005-152",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "E.e.s",
"NonProprietaryName": "Erythromycin Ethylsuccinate",
"DosageFormName": "GRANULE, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20250115",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050207",
"LabelerName": "Carnegie Pharmaceuticals LLC",
"SubstanceName": "ERYTHROMYCIN ETHYLSUCCINATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE], Macrolide Antimicrobial [EPC], Macrolide [EPC], Macrolides [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250115",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of E.E.S. and other antibacterial drugs, E.E.S. should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. E.E.S. is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the diseases listed below. Upper respiratory tract infections of mild to moderate degree caused by Streptococcus pyogenes, Streptococcus pneumoniae, or Haemophilus influenzae (when used concomitantly with adequate doses of sulfonamides, since many strains of H. influenzae are not susceptible to the erythromycin concentrations ordinarily achieved). (See appropriate sulfonamide labeling for prescribing information.). Lower-respiratory tract infections of mild to moderate severity caused by Streptococcus pneumoniae or Streptococcus pyogenes. Listeriosis caused by Listeria monocytogenes. Pertussis (whooping cough) caused by Bordetella pertussis. Erythromycin is effective in eliminating the organism from the nasopharynx of infected individuals rendering them noninfectious. Some clinical studies suggest that erythromycin may be helpful in the prophylaxis of pertussis in exposed susceptible individuals. Respiratory tract infections due to Mycoplasma pneumoniae. Skin and skin structure infections of mild to moderate severity caused by Streptococcus pyogenes or Staphylococcus aureus (resistant staphylococci may emerge during treatment). Diphtheria: Infections due to Corynebacterium diphtheriae, as an adjunct to antitoxin, to prevent establishment of carriers and to eradicate the organism in carriers. Erythrasma: In the treatment of infections due to Corynebacterium minutissimum. Intestinal amebiasis caused by Entamoeba histolytica (oral erythromycins only). Extraenteric amebiasis requires treatment with other agents. Acute pelvic inflammatory disease caused by Neisseria gonorrhoeae: As an alternative drug in treatment of acute pelvic inflammatory disease caused by N. gonorrhoeae in female patients with a history of sensitivity to penicillin. Patients should have a serologic test for syphilis before receiving erythromycin as treatment of gonorrhea and a follow-up serologic test for syphilis after 3 months. Syphilis caused by Treponema pallidum: Erythromycin is an alternate choice of treatment for primary syphilis in patients allergic to the penicillins. In treatment of primary syphilis, spinal fluid examinations should be done before treatment and as part of follow-up after therapy. Erythromycins are indicated for the treatment of the following infections caused by Chlamydia trachomatis: conjunctivitis of the newborn, pneumonia of infancy, and urogenital infections during pregnancy. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of uncomplicated urethral, endocervical, or rectal infections in adults due to Chlamydia trachomatis. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of nongonococcal urethritis caused by Ureaplasma urealyticum. Legionnaires' Disease caused by Legionella pneumophila: Although no controlled clinical efficacy studies have been conducted, in vitro and limited preliminary clinical data suggest that erythromycin may be effective in treating Legionnaires' Disease.",
"Description": "Erythromycin is produced by a strain of Saccharopolyspora erythraea (formerly Streptomyces erythraeus) and belongs to the macrolide group of antibiotics. It is basic and readily forms salts with acids. The base, the stearate salt, and the esters are poorly soluble in water. Erythromycin ethylsuccinate is an ester of erythromycin suitable for oral administration. Erythromycin ethylsuccinate is known chemically as erythromycin 2'-(ethylsuccinate). The molecular formula is C43H75NO16 and the molecular weight is 862.06. The structural formula is. E.E.S. Granules are intended for reconstitution with water. Each 5-mL teaspoonful of reconstituted cherry-flavored suspension contains erythromycin ethylsuccinate equivalent to 200 mg of erythromycin. The pleasant tasting, fruit-flavored liquids are supplied ready for oral administration. E.E.S. 200 Liquid: Each 5-mL teaspoonful of fruit-flavored suspension contains erythromycin ethylsuccinate equivalent to 200 mg of erythromycin. E.E.S. 400 Liquid: Each 5-mL teaspoonful of orange-flavored suspension contains erythromycin ethylsuccinate equivalent to 400 mg of erythromycin. Granules and ready-made suspensions are intended primarily for pediatric use but can also be used in adults. E.E.S. 400 film-coated tablets: Each tablet contains erythromycin ethylsuccinate equivalent to 400 mg of erythromycin. The film-coated tablets are intended primarily for adults or older children."
},
{
"NDCCode": "57664-155-18",
"PackageDescription": "1000 TABLET in 1 BOTTLE (57664-155-18)",
"NDC11Code": "57664-0155-18",
"ProductNDC": "57664-155",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxycodone And Acetaminophen",
"NonProprietaryName": "Oxycodone And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20131226",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090535",
"LabelerName": "Caraco Pharmaceutical Laboratories, Ltd.",
"SubstanceName": "OXYCODONE HYDROCHLORIDE; ACETAMINOPHEN",
"StrengthNumber": "5; 325",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2016-03-04"
},
{
"NDCCode": "64764-155-18",
"PackageDescription": "180 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (64764-155-18) ",
"NDC11Code": "64764-0155-18",
"ProductNDC": "64764-155",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Actoplus Met",
"NonProprietaryName": "Pioglitazone And Metformin Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20050829",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021842",
"LabelerName": "Takeda Pharmaceuticals America, Inc.",
"SubstanceName": "METFORMIN HYDROCHLORIDE; PIOGLITAZONE HYDROCHLORIDE",
"StrengthNumber": "500; 15",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS], PPAR alpha [CS], PPAR gamma [CS], Peroxisome Proliferator Receptor alpha Agonist [EPC], Peroxisome Proliferator Receptor gamma Agonist [EPC], Peroxisome Proliferator-activated Receptor Activity [MoA], Thiazolidinedione [EPC], Thiazolidinediones [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-12-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20050829",
"SamplePackage": "N"
},
{
"NDCCode": "71919-821-18",
"PackageDescription": "50 VIAL, GLASS in 1 KIT (71919-821-18) / 1 KIT in 1 VIAL, GLASS (71919-821-01) * 750 PELLET in 1 VIAL, GLASS (68428-127-01) * 750 PELLET in 1 VIAL, GLASS (68428-124-01) * 750 PELLET in 1 VIAL, GLASS (68428-123-01) * 750 PELLET in 1 VIAL, GLASS (68428-122-01) * 750 PELLET in 1 VIAL, GLASS (68428-119-01) * 750 PELLET in 1 VIAL, GLASS (68428-146-01) * 750 PELLET in 1 VIAL, GLASS (68428-099-01) * 750 PELLET in 1 VIAL, GLASS (68428-098-01) * 750 PELLET in 1 VIAL, GLASS (68428-097-01) * 750 PELLET in 1 VIAL, GLASS (68428-144-01) * 750 PELLET in 1 VIAL, GLASS (68428-142-01) * 750 PELLET in 1 VIAL, GLASS (68428-148-01) * 750 PELLET in 1 VIAL, GLASS (68428-147-01) * 750 PELLET in 1 VIAL, GLASS (68428-105-01) * 750 PELLET in 1 VIAL, GLASS (68428-104-01) * 750 PELLET in 1 VIAL, GLASS (68428-103-01) * 750 PELLET in 1 VIAL, GLASS (68428-102-01) * 350 PELLET in 1 VIAL, GLASS (71919-768-01) * 750 PELLET in 1 VIAL, GLASS (68428-101-01) * 750 PELLET in 1 VIAL, GLASS (68428-154-01) * 750 PELLET in 1 VIAL, GLASS (68428-112-01) * 750 PELLET in 1 VIAL, GLASS (68428-111-01) * 750 PELLET in 1 VIAL, GLASS (68428-109-01) * 750 PELLET in 1 VIAL, GLASS (68428-108-01) * 750 PELLET in 1 VIAL, GLASS (68428-107-01) * 750 PELLET in 1 VIAL, GLASS (68428-106-01) * 750 PELLET in 1 VIAL, GLASS (68428-149-01) * 750 PELLET in 1 VIAL, GLASS (68428-118-01) * 750 PELLET in 1 VIAL, GLASS (68428-117-01) * 750 PELLET in 1 VIAL, GLASS (68428-115-01) * 750 PELLET in 1 VIAL, GLASS (68428-156-01) * 750 PELLET in 1 VIAL, GLASS (68428-114-01) * 750 PELLET in 1 VIAL, GLASS (68428-155-01) * 750 PELLET in 1 VIAL, GLASS (68428-086-01) * 750 PELLET in 1 VIAL, GLASS (68428-095-01) * 750 PELLET in 1 VIAL, GLASS (68428-138-01) * 750 PELLET in 1 VIAL, GLASS (68428-092-01) * 750 PELLET in 1 VIAL, GLASS (68428-091-01) * 750 PELLET in 1 VIAL, GLASS (68428-085-01) * 750 PELLET in 1 VIAL, GLASS (68428-090-01) * 750 PELLET in 1 VIAL, GLASS (68428-134-01) * 750 PELLET in 1 VIAL, GLASS (68428-133-01) * 750 PELLET in 1 VIAL, GLASS (68428-084-01) * 750 PELLET in 1 VIAL, GLASS (68428-083-01) * 750 PELLET in 1 VIAL, GLASS (68428-082-01) * 750 PELLET in 1 VIAL, GLASS (68428-080-01) * 750 PELLET in 1 VIAL, GLASS (68428-131-01) * 750 PELLET in 1 VIAL, GLASS (68428-078-01) * 750 PELLET in 1 VIAL, GLASS (68428-125-01) * 750 PELLET in 1 VIAL, GLASS (68428-077-01) ",
"NDC11Code": "71919-0821-18",
"ProductNDC": "71919-821",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "30c Homeopathic Remedy Kit",
"NonProprietaryName": "50 Remedy Kit",
"DosageFormName": "KIT",
"RouteName": "ORAL",
"StartMarketingDate": "20240221",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"Status": "Active",
"LastUpdate": "2026-01-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240221",
"SamplePackage": "N",
"IndicationAndUsage": "Acon nap fear. Aesculus hipp hemorrhoids. Allium cepa head cold. Antimon crud warts. Apis mel stings. Arnica bruises. Arsenicum alb vomiting. Belladonna fever. Bellis bruised soreness. Berber vulg itching. Bryonia worse motion. Calc carb overwork. Caulophyllum cramps. Causticum hoarseness. Chamomilla irritability. Cimicifuga minor back pain. Coffea cruda sleeplessness. Drosera cough. Eupatorium perf flu-like symptoms. Euphrasia eye irritation. Ferrum phos low fever. Gelsemium lethargy. Hamamelis varicose veins. Hepar sulph calc croupiness. Hydrastis sinuses. Hypericum shooting pain. Ignatia sadness. Ipecac nausea. Kali bic sinuses. Kali carb sour belching. Kali mur congested ears. Kali phos irritability. Lachesis sore throat. Ledum black eyes. Lycopodium digestion. Mag phos cramps. Nat mur sneezing. Nux vom vomiting. Petroleum nausea. Phosphoricum ac headache. Phytolacca sore throat. Podoph pelt diarrhea. Pulsatilla weeping. Rhus tox better motion. Ruta bruised feeling. Sepia indifference. Staphysag anger. Sulphur skin problems. Symphytum prickling pain. Thuja occ warts."
},
{
"NDCCode": "84010-155-04",
"PackageDescription": "18 mL in 1 BOTTLE (84010-155-04) ",
"NDC11Code": "84010-0155-04",
"ProductNDC": "84010-155",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Johohula Common And Plantar Wart Remover",
"NonProprietaryName": "Salicylic Acid 17% Common And Plantar Wart Remover",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20250717",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M028",
"LabelerName": "Jiangxi Hemei Pharmaceutical Co., Ltd",
"SubstanceName": "SALICYLIC ACID",
"StrengthNumber": "17",
"StrengthUnit": "g/100mL",
"Status": "Deprecated",
"LastUpdate": "2025-08-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250717",
"SamplePackage": "N",
"IndicationAndUsage": "■For the removal of common andplantar warts."
},
{
"NDCCode": "0942-6308-02",
"PackageDescription": "70 mL in 1 BAG (0942-6308-02) ",
"NDC11Code": "00942-6308-02",
"ProductNDC": "0942-6308",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cpda-1",
"NonProprietaryName": "Anticoagulant Citrate Phosphate Dextrose Adenine",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20070301",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "BN770420",
"LabelerName": "Fenwal, Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE; ANHYDROUS CITRIC ACID; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; ADENINE",
"StrengthNumber": "2.23; 1.84; 209; 155; 19.3",
"StrengthUnit": "g/70mL; g/70mL; mg/70mL; mg/70mL; mg/70mL",
"Pharm_Classes": "Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]",
"Status": "Active",
"LastUpdate": "2021-06-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20070301",
"SamplePackage": "N"
},
{
"NDCCode": "0942-6326-04",
"PackageDescription": "70 mL in 1 BAG (0942-6326-04) ",
"NDC11Code": "00942-6326-04",
"ProductNDC": "0942-6326",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cpda-1",
"NonProprietaryName": "Anticoagulant Citrate Phosphate Dextrose Adenine",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20081215",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "BN770420",
"LabelerName": "Fenwal, Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE; ANHYDROUS CITRIC ACID; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; ADENINE",
"StrengthNumber": "2.23; 1.84; 209; 155; 19.3",
"StrengthUnit": "g/70mL; g/70mL; mg/70mL; mg/70mL; mg/70mL",
"Pharm_Classes": "Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]",
"Status": "Active",
"LastUpdate": "2021-06-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20081215",
"SamplePackage": "N"
},
{
"NDCCode": "10544-155-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (10544-155-30)",
"NDC11Code": "10544-0155-30",
"ProductNDC": "10544-155",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alprazolam",
"NonProprietaryName": "Alprazolam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20131115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074174",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "ALPRAZOLAM",
"StrengthNumber": ".25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "ALPRAZOLAM Tablets (alprazolam) are indicated for the management of anxiety disorder (a condition corresponding most closely to the APA Diagnostic and Statistical Manual [DSM-III-R] diagnosis of generalized anxiety disorder) or the short-term relief of symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. Generalized anxiety disorder is characterized by unrealistic or excessive anxiety and worry (apprehensive expectation) about two or more life circumstances, for a period of six months or longer, during which the person has been bothered more days than not by these concerns. At least 6 of the following 18 symptoms are often present in these patients: Motor Tension (trembling, twitching, or feeling shaky; muscle tension, aches, or soreness; restlessness; easy fatigability); Autonomic Hyperactivity (shortness of breath or smothering sensations; palpitations or accelerated heart rate; sweating, or cold clammy hands; dry mouth; dizziness or light-headedness; nausea, diarrhea, or other abdominal distress; flushes or chills; frequent urination; trouble swallowing or ‘lump in throat’); Vigilance and Scanning (feeling keyed up or on edge; exaggerated startle response; difficulty concentrating or ‘mind going blank’ because of anxiety; trouble falling or staying asleep; irritability). These symptoms must not be secondary to another psychiatric disorder or caused by some organic factor. Anxiety associated with depression is responsive to alprazolam.",
"Description": "Alprazolam Tablets contain alprazolam which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-Chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-1] [1,4] benzodiazepine. The structural formula is represented to the right. Alprazolam is a white to off-white crystalline powder, which is soluble in methanol or ethanol but which has no appreciable solubility in water at physiological pH. Each ALPRAZOLAM Tablet, for oral administration, contains 0.25, 0.5, 1 or 2 mg of alprazolam. Inactive ingredients: crospovidone, docusate sodium, lactose, magnesium stearate, microcrystalline cellulose, silicon dioxide, sodium benzoate and starch 1500. In addition, the 0.5 mg tablet contains D&C Yellow No. 10 and the 1 mg and 2 mg tablet contains Green Lake Blend."
},
{
"NDCCode": "10544-155-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (10544-155-60)",
"NDC11Code": "10544-0155-60",
"ProductNDC": "10544-155",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alprazolam",
"NonProprietaryName": "Alprazolam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20131115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074174",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "ALPRAZOLAM",
"StrengthNumber": ".25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "ALPRAZOLAM Tablets (alprazolam) are indicated for the management of anxiety disorder (a condition corresponding most closely to the APA Diagnostic and Statistical Manual [DSM-III-R] diagnosis of generalized anxiety disorder) or the short-term relief of symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. Generalized anxiety disorder is characterized by unrealistic or excessive anxiety and worry (apprehensive expectation) about two or more life circumstances, for a period of six months or longer, during which the person has been bothered more days than not by these concerns. At least 6 of the following 18 symptoms are often present in these patients: Motor Tension (trembling, twitching, or feeling shaky; muscle tension, aches, or soreness; restlessness; easy fatigability); Autonomic Hyperactivity (shortness of breath or smothering sensations; palpitations or accelerated heart rate; sweating, or cold clammy hands; dry mouth; dizziness or light-headedness; nausea, diarrhea, or other abdominal distress; flushes or chills; frequent urination; trouble swallowing or ‘lump in throat’); Vigilance and Scanning (feeling keyed up or on edge; exaggerated startle response; difficulty concentrating or ‘mind going blank’ because of anxiety; trouble falling or staying asleep; irritability). These symptoms must not be secondary to another psychiatric disorder or caused by some organic factor. Anxiety associated with depression is responsive to alprazolam.",
"Description": "Alprazolam Tablets contain alprazolam which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-Chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-1] [1,4] benzodiazepine. The structural formula is represented to the right. Alprazolam is a white to off-white crystalline powder, which is soluble in methanol or ethanol but which has no appreciable solubility in water at physiological pH. Each ALPRAZOLAM Tablet, for oral administration, contains 0.25, 0.5, 1 or 2 mg of alprazolam. Inactive ingredients: crospovidone, docusate sodium, lactose, magnesium stearate, microcrystalline cellulose, silicon dioxide, sodium benzoate and starch 1500. In addition, the 0.5 mg tablet contains D&C Yellow No. 10 and the 1 mg and 2 mg tablet contains Green Lake Blend."
},
{
"NDCCode": "10544-155-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (10544-155-90)",
"NDC11Code": "10544-0155-90",
"ProductNDC": "10544-155",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alprazolam",
"NonProprietaryName": "Alprazolam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20131115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074174",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "ALPRAZOLAM",
"StrengthNumber": ".25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "ALPRAZOLAM Tablets (alprazolam) are indicated for the management of anxiety disorder (a condition corresponding most closely to the APA Diagnostic and Statistical Manual [DSM-III-R] diagnosis of generalized anxiety disorder) or the short-term relief of symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. Generalized anxiety disorder is characterized by unrealistic or excessive anxiety and worry (apprehensive expectation) about two or more life circumstances, for a period of six months or longer, during which the person has been bothered more days than not by these concerns. At least 6 of the following 18 symptoms are often present in these patients: Motor Tension (trembling, twitching, or feeling shaky; muscle tension, aches, or soreness; restlessness; easy fatigability); Autonomic Hyperactivity (shortness of breath or smothering sensations; palpitations or accelerated heart rate; sweating, or cold clammy hands; dry mouth; dizziness or light-headedness; nausea, diarrhea, or other abdominal distress; flushes or chills; frequent urination; trouble swallowing or ‘lump in throat’); Vigilance and Scanning (feeling keyed up or on edge; exaggerated startle response; difficulty concentrating or ‘mind going blank’ because of anxiety; trouble falling or staying asleep; irritability). These symptoms must not be secondary to another psychiatric disorder or caused by some organic factor. Anxiety associated with depression is responsive to alprazolam.",
"Description": "Alprazolam Tablets contain alprazolam which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-Chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-1] [1,4] benzodiazepine. The structural formula is represented to the right. Alprazolam is a white to off-white crystalline powder, which is soluble in methanol or ethanol but which has no appreciable solubility in water at physiological pH. Each ALPRAZOLAM Tablet, for oral administration, contains 0.25, 0.5, 1 or 2 mg of alprazolam. Inactive ingredients: crospovidone, docusate sodium, lactose, magnesium stearate, microcrystalline cellulose, silicon dioxide, sodium benzoate and starch 1500. In addition, the 0.5 mg tablet contains D&C Yellow No. 10 and the 1 mg and 2 mg tablet contains Green Lake Blend."
},
{
"NDCCode": "37000-155-01",
"PackageDescription": "2 CANISTER in 1 CELLO PACK (37000-155-01) > 48 g in 1 CANISTER",
"NDC11Code": "37000-0155-01",
"ProductNDC": "37000-155",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Old Spice Wild Collection",
"ProprietaryNameSuffix": "Wolfthorn Invisible",
"NonProprietaryName": "Aluminum Zirconium Trichlorohydrex Gly",
"DosageFormName": "STICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20121101",
"EndMarketingDate": "20220101",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part350",
"LabelerName": "The Procter & Gamble Manufacturing Company",
"SubstanceName": "ALUMINUM ZIRCONIUM TRICHLOROHYDREX GLY",
"StrengthNumber": "18",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20151229",
"EndMarketingDatePackage": "20220101",
"SamplePackage": "N"
},
{
"NDCCode": "37000-155-45",
"PackageDescription": "45 g in 1 CANISTER (37000-155-45)",
"NDC11Code": "37000-0155-45",
"ProductNDC": "37000-155",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Old Spice Wild Collection",
"ProprietaryNameSuffix": "Wolfthorn Invisible",
"NonProprietaryName": "Aluminum Zirconium Trichlorohydrex Gly",
"DosageFormName": "STICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20121101",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part350",
"LabelerName": "Procter & Gamble Manufacturing Company",
"SubstanceName": "ALUMINUM ZIRCONIUM TRICHLOROHYDREX GLY",
"StrengthNumber": ".18",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2015-06-16"
},
{
"NDCCode": "37000-155-48",
"PackageDescription": "48 g in 1 CANISTER (37000-155-48) ",
"NDC11Code": "37000-0155-48",
"ProductNDC": "37000-155",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Old Spice Wild Collection",
"ProprietaryNameSuffix": "Wolfthorn Invisible",
"NonProprietaryName": "Aluminum Zirconium Trichlorohydrex Gly",
"DosageFormName": "STICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20121101",
"EndMarketingDate": "20220101",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part350",
"LabelerName": "The Procter & Gamble Manufacturing Company",
"SubstanceName": "ALUMINUM ZIRCONIUM TRICHLOROHYDREX GLY",
"StrengthNumber": "18",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20151101",
"EndMarketingDatePackage": "20220101",
"SamplePackage": "N"
},
{
"NDCCode": "37000-155-73",
"PackageDescription": "73 g in 1 CANISTER (37000-155-73) ",
"NDC11Code": "37000-0155-73",
"ProductNDC": "37000-155",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Old Spice Wild Collection",
"ProprietaryNameSuffix": "Wolfthorn Invisible",
"NonProprietaryName": "Aluminum Zirconium Trichlorohydrex Gly",
"DosageFormName": "STICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20121101",
"EndMarketingDate": "20220101",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part350",
"LabelerName": "The Procter & Gamble Manufacturing Company",
"SubstanceName": "ALUMINUM ZIRCONIUM TRICHLOROHYDREX GLY",
"StrengthNumber": "18",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20121101",
"EndMarketingDatePackage": "20220101",
"SamplePackage": "N"
},
{
"NDCCode": "37000-155-96",
"PackageDescription": "96 g in 1 CANISTER (37000-155-96) ",
"NDC11Code": "37000-0155-96",
"ProductNDC": "37000-155",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Old Spice Wild Collection",
"ProprietaryNameSuffix": "Wolfthorn Invisible",
"NonProprietaryName": "Aluminum Zirconium Trichlorohydrex Gly",
"DosageFormName": "STICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20121101",
"EndMarketingDate": "20220101",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part350",
"LabelerName": "The Procter & Gamble Manufacturing Company",
"SubstanceName": "ALUMINUM ZIRCONIUM TRICHLOROHYDREX GLY",
"StrengthNumber": "18",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20151201",
"EndMarketingDatePackage": "20220101",
"SamplePackage": "N"
},
{
"NDCCode": "50021-061-01",
"PackageDescription": "155 g in 1 CAN (50021-061-01)",
"NDC11Code": "50021-0061-01",
"ProductNDC": "50021-061",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sunzone Kids Spf 60",
"ProprietaryNameSuffix": "Broad Spectrum",
"NonProprietaryName": "Octinoxate, Octocrylene, Octisalate, Oxybenzone, Avobenzone And Homosalate.",
"DosageFormName": "AEROSOL, SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20121116",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Empack Spraytech Inc.",
"SubstanceName": "OCTINOXATE; OCTOCRYLENE; OCTISALATE; OXYBENZONE; AVOBENZONE; HOMOSALATE",
"StrengthNumber": "7.75; 7.75; 7.75; 9.3; 4.65; 18.6",
"StrengthUnit": "g/155g; g/155g; g/155g; g/155g; g/155g; g/155g",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Spray liberally and spread evenly by hand 15 minutes before sun exposure. Reapply. after 80 minutes of swimming or sweatingimmediately after towel dryingat least every 2 hours. Hold container 4 to 6 inches from the skin to apply. Do not spray directly into face. Spray on hand then apply to face. Do not apply in windy conditions. Use in a well-ventilated area."
},
{
"NDCCode": "50021-062-01",
"PackageDescription": "155 g in 1 CAN (50021-062-01)",
"NDC11Code": "50021-0062-01",
"ProductNDC": "50021-062",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sunzone Family Spf 60",
"ProprietaryNameSuffix": "Broad Spectrum",
"NonProprietaryName": "Octinoxate, Octocrylene, Octisalate, Oxybenzone, Avobenzone And Homosalate.",
"DosageFormName": "AEROSOL, SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20121116",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Empack Spraytech Inc.",
"SubstanceName": "OCTINOXATE; OCTOCRYLENE; OCTISALATE; OXYBENZONE; AVOBENZONE; HOMOSALATE",
"StrengthNumber": "7.75; 7.75; 7.75; 9.3; 4.65; 18.6",
"StrengthUnit": "g/155g; g/155g; g/155g; g/155g; g/155g; g/155g",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Spray liberally and spread evenly by hand 15 minutes before sun exposure. Reapply. after 80 minutes of swimming or sweatingimmediately after towel dryingat least every 2 hours. Hold container 4 to 6 inches from the skin to apply. Do not spray directly into face. Spray on hand then apply to face. Do not apply in windy conditions. Use in a well-ventilated area."
},
{
"NDCCode": "50021-305-01",
"PackageDescription": "155 g in 1 CAN (50021-305-01)",
"NDC11Code": "50021-0305-01",
"ProductNDC": "50021-305",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sunzone Sunscreen Sport Spf 60",
"ProprietaryNameSuffix": "Broad Spectrum",
"NonProprietaryName": "Octinoxate, Octocrylene, Octisalate, Oxybenzone, Avobenzone And Homosalate.",
"DosageFormName": "AEROSOL, SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Empack Spraytech Inc.",
"SubstanceName": "OCTINOXATE; OCTOCRYLENE; OCTISALATE; OXYBENZONE; AVOBENZONE; HOMOSALATE",
"StrengthNumber": "7.75; 7.75; 7.75; 9.3; 4.65; 18.6",
"StrengthUnit": "g/155g; g/155g; g/155g; g/155g; g/155g; g/155g",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Spray liberally and spread evenly by hand 15 minutes before sun exposure. Reapply. after 80 minutes of swimming or sweatingimmediately after towel dryingat least every 2 hours. Hold container 4 to 6 inches from the skin to apply. Do not spray directly into face. Spray on hand then apply to face. Do not apply in windy conditions. Use in a well-ventilated area."
},
{
"NDCCode": "50090-3625-0",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (50090-3625-0) ",
"NDC11Code": "50090-3625-00",
"ProductNDC": "50090-3625",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Xarelto",
"NonProprietaryName": "Rivaroxaban",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20110701",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022406",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "RIVAROXABAN",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-05-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181006",
"SamplePackage": "N",
"IndicationAndUsage": "XARELTO is a factor Xa inhibitor indicated: 1 to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation ( 1.1) , 2 for treatment of deep vein thrombosis (DVT) ( 1.2) , 3 for treatment of pulmonary embolism (PE) ( 1.3) , 4 for reduction in the risk of recurrence of DVT or PE ( 1.4) , 5 for the prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery ( 1.5) , 6 for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients ( 1.6) , 7 to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) ( 1.7) , 8 to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD ( 1.8) , 9 for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years ( 1.9) , 10 for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure ( 1.10) .",
"Description": "Rivaroxaban, a factor Xa (FXa) inhibitor, is the active ingredient in XARELTO ® Tablets and XARELTO ® for oral suspension with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban is C 19H 18ClN 3O 5S and the molecular weight is 435.89. The structural formula is:. Rivaroxaban is a pure ( S)-enantiomer. It is an odorless, non-hygroscopic, white to yellowish powder. Rivaroxaban is only slightly soluble in organic solvents (e.g., acetone, polyethylene glycol 400) and is practically insoluble in water and aqueous media. Each XARELTO tablet contains 2.5 mg, 10 mg, 15 mg, or 20 mg of rivaroxaban. The inactive ingredients of XARELTO are: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for XARELTO 2.5 mg is Opadry ® Light Yellow, containing ferric oxide yellow, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 10 mg tablets is Opadry ® Pink and for XARELTO 15 mg tablets is Opadry ® Red, both containing ferric oxide red, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 20 mg tablets is Opadry ® II Dark Red, containing ferric oxide red, polyethylene glycol 3350, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. XARELTO for oral suspension is supplied as granules in bottles containing 155 mg of rivaroxaban (1 mg of rivaroxaban per mL after reconstitution). The inactive ingredients are: anhydrous citric acid, hypromellose, mannitol, microcrystalline cellulose and carboxymethylcellulose sodium, sodium benzoate, sucralose, sweet and creamy flavor and xanthan gum."
},
{
"NDCCode": "50090-3625-1",
"PackageDescription": "12 TABLET, FILM COATED in 1 BOTTLE (50090-3625-1) ",
"NDC11Code": "50090-3625-01",
"ProductNDC": "50090-3625",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Xarelto",
"NonProprietaryName": "Rivaroxaban",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20110701",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022406",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "RIVAROXABAN",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-05-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240515",
"SamplePackage": "N",
"IndicationAndUsage": "XARELTO is a factor Xa inhibitor indicated: 1 to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation ( 1.1) , 2 for treatment of deep vein thrombosis (DVT) ( 1.2) , 3 for treatment of pulmonary embolism (PE) ( 1.3) , 4 for reduction in the risk of recurrence of DVT or PE ( 1.4) , 5 for the prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery ( 1.5) , 6 for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients ( 1.6) , 7 to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) ( 1.7) , 8 to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD ( 1.8) , 9 for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years ( 1.9) , 10 for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure ( 1.10) .",
"Description": "Rivaroxaban, a factor Xa (FXa) inhibitor, is the active ingredient in XARELTO ® Tablets and XARELTO ® for oral suspension with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban is C 19H 18ClN 3O 5S and the molecular weight is 435.89. The structural formula is:. Rivaroxaban is a pure ( S)-enantiomer. It is an odorless, non-hygroscopic, white to yellowish powder. Rivaroxaban is only slightly soluble in organic solvents (e.g., acetone, polyethylene glycol 400) and is practically insoluble in water and aqueous media. Each XARELTO tablet contains 2.5 mg, 10 mg, 15 mg, or 20 mg of rivaroxaban. The inactive ingredients of XARELTO are: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for XARELTO 2.5 mg is Opadry ® Light Yellow, containing ferric oxide yellow, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 10 mg tablets is Opadry ® Pink and for XARELTO 15 mg tablets is Opadry ® Red, both containing ferric oxide red, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 20 mg tablets is Opadry ® II Dark Red, containing ferric oxide red, polyethylene glycol 3350, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. XARELTO for oral suspension is supplied as granules in bottles containing 155 mg of rivaroxaban (1 mg of rivaroxaban per mL after reconstitution). The inactive ingredients are: anhydrous citric acid, hypromellose, mannitol, microcrystalline cellulose and carboxymethylcellulose sodium, sodium benzoate, sucralose, sweet and creamy flavor and xanthan gum."
},
{
"NDCCode": "50090-3639-0",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (50090-3639-0) ",
"NDC11Code": "50090-3639-00",
"ProductNDC": "50090-3639",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Xarelto",
"NonProprietaryName": "Rivaroxaban",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20111105",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022406",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "RIVAROXABAN",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-07-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181008",
"SamplePackage": "N",
"IndicationAndUsage": "XARELTO is a factor Xa inhibitor indicated: 1 to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation ( 1.1) , 2 for treatment of deep vein thrombosis (DVT) ( 1.2) , 3 for treatment of pulmonary embolism (PE) ( 1.3) , 4 for reduction in the risk of recurrence of DVT or PE ( 1.4) , 5 for the prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery ( 1.5) , 6 for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients ( 1.6) , 7 to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) ( 1.7) , 8 to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD ( 1.8) , 9 for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years ( 1.9) , 10 for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure ( 1.10) .",
"Description": "Rivaroxaban, a factor Xa (FXa) inhibitor, is the active ingredient in XARELTO ® Tablets and XARELTO ® for oral suspension with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban is C 19H 18ClN 3O 5S and the molecular weight is 435.89. The structural formula is:. Rivaroxaban is a pure ( S)-enantiomer. It is an odorless, non-hygroscopic, white to yellowish powder. Rivaroxaban is only slightly soluble in organic solvents (e.g., acetone, polyethylene glycol 400) and is practically insoluble in water and aqueous media. Each XARELTO tablet contains 2.5 mg, 10 mg, 15 mg, or 20 mg of rivaroxaban. The inactive ingredients of XARELTO are: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for XARELTO 2.5 mg is Opadry ® Light Yellow, containing ferric oxide yellow, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 10 mg tablets is Opadry ® Pink and for XARELTO 15 mg tablets is Opadry ® Red, both containing ferric oxide red, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 20 mg tablets is Opadry ® II Dark Red, containing ferric oxide red, polyethylene glycol 3350, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. XARELTO for oral suspension is supplied as granules in bottles containing 155 mg of rivaroxaban (1 mg of rivaroxaban per mL after reconstitution). The inactive ingredients are: anhydrous citric acid, hypromellose, mannitol, microcrystalline cellulose and carboxymethylcellulose sodium, sodium benzoate, sucralose, sweet and creamy flavor and xanthan gum."
},
{
"NDCCode": "50090-4468-0",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (50090-4468-0) ",
"NDC11Code": "50090-4468-00",
"ProductNDC": "50090-4468",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Xarelto",
"NonProprietaryName": "Rivaroxaban",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20111105",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022406",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "RIVAROXABAN",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-10-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190816",
"SamplePackage": "N",
"IndicationAndUsage": "XARELTO is a factor Xa inhibitor indicated: 1 to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation ( 1.1) , 2 for treatment of deep vein thrombosis (DVT) ( 1.2) , 3 for treatment of pulmonary embolism (PE) ( 1.3) , 4 for reduction in the risk of recurrence of DVT or PE ( 1.4) , 5 for the prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery ( 1.5) , 6 for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients ( 1.6) , 7 to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) ( 1.7) , 8 to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD ( 1.8) , 9 for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years ( 1.9) , 10 for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure ( 1.10) .",
"Description": "Rivaroxaban, a factor Xa (FXa) inhibitor, is the active ingredient in XARELTO ® Tablets and XARELTO ® for oral suspension with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban is C 19H 18ClN 3O 5S and the molecular weight is 435.89. The structural formula is:. Rivaroxaban is a pure ( S)-enantiomer. It is an odorless, non-hygroscopic, white to yellowish powder. Rivaroxaban is only slightly soluble in organic solvents (e.g., acetone, polyethylene glycol 400) and is practically insoluble in water and aqueous media. Each XARELTO tablet contains 2.5 mg, 10 mg, 15 mg, or 20 mg of rivaroxaban. The inactive ingredients of XARELTO are: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for XARELTO 2.5 mg is Opadry ® Light Yellow, containing ferric oxide yellow, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 10 mg tablets is Opadry ® Pink and for XARELTO 15 mg tablets is Opadry ® Red, both containing ferric oxide red, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 20 mg tablets is Opadry ® II Dark Red, containing ferric oxide red, polyethylene glycol 3350, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. XARELTO for oral suspension is supplied as granules in bottles containing 155 mg of rivaroxaban (1 mg of rivaroxaban per mL after reconstitution). The inactive ingredients are: anhydrous citric acid, hypromellose, mannitol, microcrystalline cellulose and carboxymethylcellulose sodium, sodium benzoate, sucralose, sweet and creamy flavor and xanthan gum."
},
{
"NDCCode": "50090-4469-0",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (50090-4469-0) ",
"NDC11Code": "50090-4469-00",
"ProductNDC": "50090-4469",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Xarelto",
"NonProprietaryName": "Rivaroxaban",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20110701",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022406",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "RIVAROXABAN",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-05-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190816",
"SamplePackage": "N",
"IndicationAndUsage": "XARELTO is a factor Xa inhibitor indicated: 1 to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation ( 1.1) , 2 for treatment of deep vein thrombosis (DVT) ( 1.2) , 3 for treatment of pulmonary embolism (PE) ( 1.3) , 4 for reduction in the risk of recurrence of DVT or PE ( 1.4) , 5 for the prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery ( 1.5) , 6 for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients ( 1.6) , 7 to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) ( 1.7) , 8 to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD ( 1.8) , 9 for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years ( 1.9) , 10 for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure ( 1.10) .",
"Description": "Rivaroxaban, a factor Xa (FXa) inhibitor, is the active ingredient in XARELTO ® Tablets and XARELTO ® for oral suspension with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban is C 19H 18ClN 3O 5S and the molecular weight is 435.89. The structural formula is:. Rivaroxaban is a pure ( S)-enantiomer. It is an odorless, non-hygroscopic, white to yellowish powder. Rivaroxaban is only slightly soluble in organic solvents (e.g., acetone, polyethylene glycol 400) and is practically insoluble in water and aqueous media. Each XARELTO tablet contains 2.5 mg, 10 mg, 15 mg, or 20 mg of rivaroxaban. The inactive ingredients of XARELTO are: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for XARELTO 2.5 mg is Opadry ® Light Yellow, containing ferric oxide yellow, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 10 mg tablets is Opadry ® Pink and for XARELTO 15 mg tablets is Opadry ® Red, both containing ferric oxide red, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 20 mg tablets is Opadry ® II Dark Red, containing ferric oxide red, polyethylene glycol 3350, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. XARELTO for oral suspension is supplied as granules in bottles containing 155 mg of rivaroxaban (1 mg of rivaroxaban per mL after reconstitution). The inactive ingredients are: anhydrous citric acid, hypromellose, mannitol, microcrystalline cellulose and carboxymethylcellulose sodium, sodium benzoate, sucralose, sweet and creamy flavor and xanthan gum."
},
{
"NDCCode": "50458-575-01",
"PackageDescription": "1 BOTTLE in 1 CARTON (50458-575-01) / 1 GRANULE, FOR SUSPENSION in 1 BOTTLE",
"NDC11Code": "50458-0575-01",
"ProductNDC": "50458-575",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Xarelto",
"NonProprietaryName": "Rivaroxaban",
"DosageFormName": "GRANULE, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20211201",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA215859",
"LabelerName": "Janssen Pharmaceuticals, Inc.",
"SubstanceName": "RIVAROXABAN",
"StrengthNumber": "155",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20211201",
"SamplePackage": "N",
"IndicationAndUsage": "XARELTO is a factor Xa inhibitor indicated: 1 to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation (1.1), 2 for treatment of deep vein thrombosis (DVT) (1.2), 3 for treatment of pulmonary embolism (PE) (1.3), 4 for reduction in the risk of recurrence of DVT or PE (1.4), 5 for the prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery (1.5), 6 for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients (1.6), 7 to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) (1.7), 8 to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD (1.8), 9 for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years (1.9), 10 for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure (1.10).",
"Description": "Rivaroxaban, a factor Xa (FXa) inhibitor, is the active ingredient in XARELTO® Tablets and XARELTO® for oral suspension with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban is C19H18ClN3O5S and the molecular weight is 435.89. The structural formula is. Rivaroxaban is a pure (S)-enantiomer. It is an odorless, non-hygroscopic, white to yellowish powder. Rivaroxaban is only slightly soluble in organic solvents (e.g., acetone, polyethylene glycol 400) and is practically insoluble in water and aqueous media. Each XARELTO tablet contains 2.5 mg, 10 mg, 15 mg, or 20 mg of rivaroxaban. The inactive ingredients of XARELTO are: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for XARELTO 2.5 mg is Opadry® Light Yellow, containing ferric oxide yellow, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 10 mg tablets is Opadry® Pink and for XARELTO 15 mg tablets is Opadry® Red, both containing ferric oxide red, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 20 mg tablets is Opadry® II Dark Red, containing ferric oxide red, polyethylene glycol 3350, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. XARELTO for oral suspension is supplied as granules in bottles containing 155 mg of rivaroxaban (1 mg of rivaroxaban per mL after reconstitution). The inactive ingredients are: anhydrous citric acid, hypromellose, mannitol, microcrystalline cellulose and carboxymethylcellulose sodium, sodium benzoate, sucralose, sweet and creamy flavor and xanthan gum."
},
{
"NDCCode": "50458-577-10",
"PackageDescription": "10 BLISTER PACK in 1 BOX, UNIT-DOSE (50458-577-10) / 10 TABLET, FILM COATED in 1 BLISTER PACK (50458-577-01) ",
"NDC11Code": "50458-0577-10",
"ProductNDC": "50458-577",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Xarelto",
"NonProprietaryName": "Rivaroxaban",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20181009",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022406",
"LabelerName": "Janssen Pharmaceuticals, Inc.",
"SubstanceName": "RIVAROXABAN",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181009",
"SamplePackage": "N",
"IndicationAndUsage": "XARELTO is a factor Xa inhibitor indicated: 1 to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation (1.1), 2 for treatment of deep vein thrombosis (DVT) (1.2), 3 for treatment of pulmonary embolism (PE) (1.3), 4 for reduction in the risk of recurrence of DVT or PE (1.4), 5 for the prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery (1.5), 6 for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients (1.6), 7 to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) (1.7), 8 to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD (1.8), 9 for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years (1.9), 10 for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure (1.10).",
"Description": "Rivaroxaban, a factor Xa (FXa) inhibitor, is the active ingredient in XARELTO® Tablets and XARELTO® for oral suspension with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban is C19H18ClN3O5S and the molecular weight is 435.89. The structural formula is. Rivaroxaban is a pure (S)-enantiomer. It is an odorless, non-hygroscopic, white to yellowish powder. Rivaroxaban is only slightly soluble in organic solvents (e.g., acetone, polyethylene glycol 400) and is practically insoluble in water and aqueous media. Each XARELTO tablet contains 2.5 mg, 10 mg, 15 mg, or 20 mg of rivaroxaban. The inactive ingredients of XARELTO are: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for XARELTO 2.5 mg is Opadry® Light Yellow, containing ferric oxide yellow, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 10 mg tablets is Opadry® Pink and for XARELTO 15 mg tablets is Opadry® Red, both containing ferric oxide red, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 20 mg tablets is Opadry® II Dark Red, containing ferric oxide red, polyethylene glycol 3350, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. XARELTO for oral suspension is supplied as granules in bottles containing 155 mg of rivaroxaban (1 mg of rivaroxaban per mL after reconstitution). The inactive ingredients are: anhydrous citric acid, hypromellose, mannitol, microcrystalline cellulose and carboxymethylcellulose sodium, sodium benzoate, sucralose, sweet and creamy flavor and xanthan gum."
},
{
"NDCCode": "50458-577-14",
"PackageDescription": "14 TABLET, FILM COATED in 1 BOTTLE (50458-577-14) ",
"NDC11Code": "50458-0577-14",
"ProductNDC": "50458-577",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Xarelto",
"NonProprietaryName": "Rivaroxaban",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20181009",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022406",
"LabelerName": "Janssen Pharmaceuticals, Inc.",
"SubstanceName": "RIVAROXABAN",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181009",
"SamplePackage": "Y",
"IndicationAndUsage": "XARELTO is a factor Xa inhibitor indicated: 1 to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation (1.1), 2 for treatment of deep vein thrombosis (DVT) (1.2), 3 for treatment of pulmonary embolism (PE) (1.3), 4 for reduction in the risk of recurrence of DVT or PE (1.4), 5 for the prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery (1.5), 6 for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients (1.6), 7 to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) (1.7), 8 to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD (1.8), 9 for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years (1.9), 10 for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure (1.10).",
"Description": "Rivaroxaban, a factor Xa (FXa) inhibitor, is the active ingredient in XARELTO® Tablets and XARELTO® for oral suspension with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban is C19H18ClN3O5S and the molecular weight is 435.89. The structural formula is. Rivaroxaban is a pure (S)-enantiomer. It is an odorless, non-hygroscopic, white to yellowish powder. Rivaroxaban is only slightly soluble in organic solvents (e.g., acetone, polyethylene glycol 400) and is practically insoluble in water and aqueous media. Each XARELTO tablet contains 2.5 mg, 10 mg, 15 mg, or 20 mg of rivaroxaban. The inactive ingredients of XARELTO are: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for XARELTO 2.5 mg is Opadry® Light Yellow, containing ferric oxide yellow, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 10 mg tablets is Opadry® Pink and for XARELTO 15 mg tablets is Opadry® Red, both containing ferric oxide red, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 20 mg tablets is Opadry® II Dark Red, containing ferric oxide red, polyethylene glycol 3350, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. XARELTO for oral suspension is supplied as granules in bottles containing 155 mg of rivaroxaban (1 mg of rivaroxaban per mL after reconstitution). The inactive ingredients are: anhydrous citric acid, hypromellose, mannitol, microcrystalline cellulose and carboxymethylcellulose sodium, sodium benzoate, sucralose, sweet and creamy flavor and xanthan gum."
},
{
"NDCCode": "50458-577-18",
"PackageDescription": "180 TABLET, FILM COATED in 1 BOTTLE (50458-577-18) ",
"NDC11Code": "50458-0577-18",
"ProductNDC": "50458-577",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Xarelto",
"NonProprietaryName": "Rivaroxaban",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20181009",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022406",
"LabelerName": "Janssen Pharmaceuticals, Inc.",
"SubstanceName": "RIVAROXABAN",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181009",
"SamplePackage": "N",
"IndicationAndUsage": "XARELTO is a factor Xa inhibitor indicated: 1 to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation (1.1), 2 for treatment of deep vein thrombosis (DVT) (1.2), 3 for treatment of pulmonary embolism (PE) (1.3), 4 for reduction in the risk of recurrence of DVT or PE (1.4), 5 for the prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery (1.5), 6 for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients (1.6), 7 to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) (1.7), 8 to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD (1.8), 9 for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years (1.9), 10 for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure (1.10).",
"Description": "Rivaroxaban, a factor Xa (FXa) inhibitor, is the active ingredient in XARELTO® Tablets and XARELTO® for oral suspension with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban is C19H18ClN3O5S and the molecular weight is 435.89. The structural formula is. Rivaroxaban is a pure (S)-enantiomer. It is an odorless, non-hygroscopic, white to yellowish powder. Rivaroxaban is only slightly soluble in organic solvents (e.g., acetone, polyethylene glycol 400) and is practically insoluble in water and aqueous media. Each XARELTO tablet contains 2.5 mg, 10 mg, 15 mg, or 20 mg of rivaroxaban. The inactive ingredients of XARELTO are: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for XARELTO 2.5 mg is Opadry® Light Yellow, containing ferric oxide yellow, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 10 mg tablets is Opadry® Pink and for XARELTO 15 mg tablets is Opadry® Red, both containing ferric oxide red, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 20 mg tablets is Opadry® II Dark Red, containing ferric oxide red, polyethylene glycol 3350, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. XARELTO for oral suspension is supplied as granules in bottles containing 155 mg of rivaroxaban (1 mg of rivaroxaban per mL after reconstitution). The inactive ingredients are: anhydrous citric acid, hypromellose, mannitol, microcrystalline cellulose and carboxymethylcellulose sodium, sodium benzoate, sucralose, sweet and creamy flavor and xanthan gum."
},
{
"NDCCode": "50458-577-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (50458-577-60) ",
"NDC11Code": "50458-0577-60",
"ProductNDC": "50458-577",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Xarelto",
"NonProprietaryName": "Rivaroxaban",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20181009",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022406",
"LabelerName": "Janssen Pharmaceuticals, Inc.",
"SubstanceName": "RIVAROXABAN",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181009",
"SamplePackage": "N",
"IndicationAndUsage": "XARELTO is a factor Xa inhibitor indicated: 1 to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation (1.1), 2 for treatment of deep vein thrombosis (DVT) (1.2), 3 for treatment of pulmonary embolism (PE) (1.3), 4 for reduction in the risk of recurrence of DVT or PE (1.4), 5 for the prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery (1.5), 6 for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients (1.6), 7 to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) (1.7), 8 to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD (1.8), 9 for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years (1.9), 10 for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure (1.10).",
"Description": "Rivaroxaban, a factor Xa (FXa) inhibitor, is the active ingredient in XARELTO® Tablets and XARELTO® for oral suspension with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban is C19H18ClN3O5S and the molecular weight is 435.89. The structural formula is. Rivaroxaban is a pure (S)-enantiomer. It is an odorless, non-hygroscopic, white to yellowish powder. Rivaroxaban is only slightly soluble in organic solvents (e.g., acetone, polyethylene glycol 400) and is practically insoluble in water and aqueous media. Each XARELTO tablet contains 2.5 mg, 10 mg, 15 mg, or 20 mg of rivaroxaban. The inactive ingredients of XARELTO are: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for XARELTO 2.5 mg is Opadry® Light Yellow, containing ferric oxide yellow, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 10 mg tablets is Opadry® Pink and for XARELTO 15 mg tablets is Opadry® Red, both containing ferric oxide red, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 20 mg tablets is Opadry® II Dark Red, containing ferric oxide red, polyethylene glycol 3350, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. XARELTO for oral suspension is supplied as granules in bottles containing 155 mg of rivaroxaban (1 mg of rivaroxaban per mL after reconstitution). The inactive ingredients are: anhydrous citric acid, hypromellose, mannitol, microcrystalline cellulose and carboxymethylcellulose sodium, sodium benzoate, sucralose, sweet and creamy flavor and xanthan gum."
},
{
"NDCCode": "50458-578-07",
"PackageDescription": "7 TABLET, FILM COATED in 1 BOTTLE (50458-578-07) ",
"NDC11Code": "50458-0578-07",
"ProductNDC": "50458-578",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Xarelto",
"NonProprietaryName": "Rivaroxaban",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20111104",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022406",
"LabelerName": "Janssen Pharmaceuticals, Inc.",
"SubstanceName": "RIVAROXABAN",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160920",
"SamplePackage": "Y",
"IndicationAndUsage": "XARELTO is a factor Xa inhibitor indicated: 1 to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation (1.1), 2 for treatment of deep vein thrombosis (DVT) (1.2), 3 for treatment of pulmonary embolism (PE) (1.3), 4 for reduction in the risk of recurrence of DVT or PE (1.4), 5 for the prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery (1.5), 6 for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients (1.6), 7 to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) (1.7), 8 to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD (1.8), 9 for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years (1.9), 10 for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure (1.10).",
"Description": "Rivaroxaban, a factor Xa (FXa) inhibitor, is the active ingredient in XARELTO® Tablets and XARELTO® for oral suspension with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban is C19H18ClN3O5S and the molecular weight is 435.89. The structural formula is. Rivaroxaban is a pure (S)-enantiomer. It is an odorless, non-hygroscopic, white to yellowish powder. Rivaroxaban is only slightly soluble in organic solvents (e.g., acetone, polyethylene glycol 400) and is practically insoluble in water and aqueous media. Each XARELTO tablet contains 2.5 mg, 10 mg, 15 mg, or 20 mg of rivaroxaban. The inactive ingredients of XARELTO are: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for XARELTO 2.5 mg is Opadry® Light Yellow, containing ferric oxide yellow, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 10 mg tablets is Opadry® Pink and for XARELTO 15 mg tablets is Opadry® Red, both containing ferric oxide red, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 20 mg tablets is Opadry® II Dark Red, containing ferric oxide red, polyethylene glycol 3350, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. XARELTO for oral suspension is supplied as granules in bottles containing 155 mg of rivaroxaban (1 mg of rivaroxaban per mL after reconstitution). The inactive ingredients are: anhydrous citric acid, hypromellose, mannitol, microcrystalline cellulose and carboxymethylcellulose sodium, sodium benzoate, sucralose, sweet and creamy flavor and xanthan gum."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>80005-155-18</NDCCode>
<PackageDescription>100 mL in 1 BOTTLE (80005-155-18) </PackageDescription>
<NDC11Code>80005-0155-18</NDC11Code>
<ProductNDC>80005-155</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ery-ped</ProprietaryName>
<NonProprietaryName>Erythromycin Ethylsuccinate</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250115</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050207</ApplicationNumber>
<LabelerName>Carnegie Pharmaceuticals LLC</LabelerName>
<SubstanceName>ERYTHROMYCIN ETHYLSUCCINATE</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Macrolide Antimicrobial [EPC], Macrolide [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ery-Ped and other antibacterial drugs, Ery-Ped should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Ery-Ped is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the diseases listed below. Upper respiratory tract infections of mild to moderate degree caused by Streptococcus pyogenes, Streptococcus pneumoniae, or Haemophilus influenzae (when used concomitantly with adequate doses of sulfonamides, since many strains of H. influenzae are not susceptible to the erythromycin concentrations ordinarily achieved). (See appropriate sulfonamide labeling for prescribing information.). Lower-respiratory tract infections of mild to moderate severity caused by Streptococcus pneumoniae or Streptococcus pyogenes. Listeriosis caused by Listeria monocytogenes. Pertussis (whooping cough) caused by Bordetella pertussis. Erythromycin is effective in eliminating the organism from the nasopharynx of infectedindividuals rendering them noninfectious. Some clinical studies suggest that erythromycin may be helpful in the prophylaxis of pertussis in exposedsusceptible individuals. Respiratory tract infections due to Mycoplasma pneumoniae. Skin and skin structure infections of mild to moderate severity caused by Streptococcus pyogenes or Staphylococcus aureus (resistant staphylococci may emerge during treatment). Diphtheria: Infections due to Corynebacterium diphtheriae, as an adjunct to antitoxin, to prevent establishment of carriers and to eradicate the organism in carriers. Erythrasma: In the treatment of infections due to Corynebacterium minutissimum. Intestinal amebiasis caused by Entamoeba histolytica (oral erythromycins only). Extraenteric amebiasis requires treatment with other agents. Acute Pelvic Inflammatory Disease caused by Neisseria gonorrhoeae: As an alternative drug in treatment of acute pelvic inflammatory disease caused by N. gonorrhoeae in female patients with a history of sensitivity to penicillin. Patients should have a serologic test for syphilis before receiving erythromycin as treatment of gonorrhea and a follow-up serologic test for syphilis after 3 months. Syphilis caused by Treponema pallidum: Erythromycin is an alternate choice of treatment for primary syphilis in penicillin-allergic patients. In primary syphilis, spinal fluid examinations should be done before treatment and as part of follow-up after therapy. Erythromycins are indicated for the treatment of the following infections caused by Chlamydia trachomatis: Conjunctivitis of the newborn, pneumonia of infancy, and urogenital infections during pregnancy. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of uncomplicated urethral, endocervical, or rectal infections in adults due to Chlamydia trachomatis. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of nongonococcal urethritis caused by Ureaplasma urealyticum. Legionnaires’ Disease caused by Legionella pneumophila: Although no controlled clinical efficacy studies have been conducted, in vitro and limitedpreliminary clinical data suggest that erythromycin may be effective in treating Legionnaires’ Disease. Prophylaxis. Prevention of Initial Attacks of Rheumatic Fever: Penicillin is considered by the American Heart Association to be the drug of choice in the prevention of initial attacks of rheumatic fever (treatment of Streptococcus pyogenes infections of the upper respiratory tract, e.g., tonsillitis or pharyngitis). Erythromycin is indicated for the treatment of penicillin-allergic patients.1 The therapeutic dose should be administered for 10 days. Prevention of Recurrent Attacks of Rheumatic Fever: Penicillin or sulfonamides are considered by the American Heart Association to be the drugs of choice in the prevention of recurrent attacks of rheumatic fever. In patients who are allergic to penicillin and sulfonamides, oral erythromycin is recommended by the American Heart Association in the long-term prophylaxis of Streptococcal pharyngitis (for the prevention of recurrent attacks of rheumatic fever).1.</IndicationAndUsage>
<Description>Erythromycin is produced by a strain of Saccharopolyspora erythraea (formerly Streptomyces erythraeus) and belongs to the macrolide group of antibiotics. It is basic and readily forms salts with acids. The base, the stearate salt, and the esters are poorly soluble in water. Erythromycin ethylsuccinate is an ester of erythromycin suitable for oral administration. Erythromycin ethylsuccinate is known chemically as erythromycin 2'-(ethyl succinate). The molecular formula is C43H75NO16 and the molecular weight is 862.06. The structural formula is. Ery-Ped 200 (erythromycin ethylsuccinate for oral suspension) when reconstituted with water, forms a suspension containing erythromycin ethylsuccinate equivalent to 200 mg erythromycin per 5 mL (teaspoonful) or 100 mg per 2.5 mL (dropperful) with an appealing fruit flavor. Ery-Ped 400 when reconstituted with water, forms a suspension containing erythromycin ethylsuccinate equivalent to 400 mg of erythromycin per 5 mL (teaspoonful) with an appealing banana flavor. These products are intended primarily for pediatric use but can also be used in adults.</Description>
</NDC>
<NDC>
<NDCCode>80005-152-18</NDCCode>
<PackageDescription>100 mL in 1 BOTTLE (80005-152-18) </PackageDescription>
<NDC11Code>80005-0152-18</NDC11Code>
<ProductNDC>80005-152</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>E.e.s</ProprietaryName>
<NonProprietaryName>Erythromycin Ethylsuccinate</NonProprietaryName>
<DosageFormName>GRANULE, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250115</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050207</ApplicationNumber>
<LabelerName>Carnegie Pharmaceuticals LLC</LabelerName>
<SubstanceName>ERYTHROMYCIN ETHYLSUCCINATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Macrolide Antimicrobial [EPC], Macrolide [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of E.E.S. and other antibacterial drugs, E.E.S. should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. E.E.S. is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the diseases listed below. Upper respiratory tract infections of mild to moderate degree caused by Streptococcus pyogenes, Streptococcus pneumoniae, or Haemophilus influenzae (when used concomitantly with adequate doses of sulfonamides, since many strains of H. influenzae are not susceptible to the erythromycin concentrations ordinarily achieved). (See appropriate sulfonamide labeling for prescribing information.). Lower-respiratory tract infections of mild to moderate severity caused by Streptococcus pneumoniae or Streptococcus pyogenes. Listeriosis caused by Listeria monocytogenes. Pertussis (whooping cough) caused by Bordetella pertussis. Erythromycin is effective in eliminating the organism from the nasopharynx of infected individuals rendering them noninfectious. Some clinical studies suggest that erythromycin may be helpful in the prophylaxis of pertussis in exposed susceptible individuals. Respiratory tract infections due to Mycoplasma pneumoniae. Skin and skin structure infections of mild to moderate severity caused by Streptococcus pyogenes or Staphylococcus aureus (resistant staphylococci may emerge during treatment). Diphtheria: Infections due to Corynebacterium diphtheriae, as an adjunct to antitoxin, to prevent establishment of carriers and to eradicate the organism in carriers. Erythrasma: In the treatment of infections due to Corynebacterium minutissimum. Intestinal amebiasis caused by Entamoeba histolytica (oral erythromycins only). Extraenteric amebiasis requires treatment with other agents. Acute pelvic inflammatory disease caused by Neisseria gonorrhoeae: As an alternative drug in treatment of acute pelvic inflammatory disease caused by N. gonorrhoeae in female patients with a history of sensitivity to penicillin. Patients should have a serologic test for syphilis before receiving erythromycin as treatment of gonorrhea and a follow-up serologic test for syphilis after 3 months. Syphilis caused by Treponema pallidum: Erythromycin is an alternate choice of treatment for primary syphilis in patients allergic to the penicillins. In treatment of primary syphilis, spinal fluid examinations should be done before treatment and as part of follow-up after therapy. Erythromycins are indicated for the treatment of the following infections caused by Chlamydia trachomatis: conjunctivitis of the newborn, pneumonia of infancy, and urogenital infections during pregnancy. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of uncomplicated urethral, endocervical, or rectal infections in adults due to Chlamydia trachomatis. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of nongonococcal urethritis caused by Ureaplasma urealyticum. Legionnaires' Disease caused by Legionella pneumophila: Although no controlled clinical efficacy studies have been conducted, in vitro and limited preliminary clinical data suggest that erythromycin may be effective in treating Legionnaires' Disease.</IndicationAndUsage>
<Description>Erythromycin is produced by a strain of Saccharopolyspora erythraea (formerly Streptomyces erythraeus) and belongs to the macrolide group of antibiotics. It is basic and readily forms salts with acids. The base, the stearate salt, and the esters are poorly soluble in water. Erythromycin ethylsuccinate is an ester of erythromycin suitable for oral administration. Erythromycin ethylsuccinate is known chemically as erythromycin 2'-(ethylsuccinate). The molecular formula is C43H75NO16 and the molecular weight is 862.06. The structural formula is. E.E.S. Granules are intended for reconstitution with water. Each 5-mL teaspoonful of reconstituted cherry-flavored suspension contains erythromycin ethylsuccinate equivalent to 200 mg of erythromycin. The pleasant tasting, fruit-flavored liquids are supplied ready for oral administration. E.E.S. 200 Liquid: Each 5-mL teaspoonful of fruit-flavored suspension contains erythromycin ethylsuccinate equivalent to 200 mg of erythromycin. E.E.S. 400 Liquid: Each 5-mL teaspoonful of orange-flavored suspension contains erythromycin ethylsuccinate equivalent to 400 mg of erythromycin. Granules and ready-made suspensions are intended primarily for pediatric use but can also be used in adults. E.E.S. 400 film-coated tablets: Each tablet contains erythromycin ethylsuccinate equivalent to 400 mg of erythromycin. The film-coated tablets are intended primarily for adults or older children.</Description>
</NDC>
<NDC>
<NDCCode>57664-155-18</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (57664-155-18)</PackageDescription>
<NDC11Code>57664-0155-18</NDC11Code>
<ProductNDC>57664-155</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxycodone And Acetaminophen</ProprietaryName>
<NonProprietaryName>Oxycodone And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131226</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090535</ApplicationNumber>
<LabelerName>Caraco Pharmaceutical Laboratories, Ltd.</LabelerName>
<SubstanceName>OXYCODONE HYDROCHLORIDE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>5; 325</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2016-03-04</LastUpdate>
</NDC>
<NDC>
<NDCCode>64764-155-18</NDCCode>
<PackageDescription>180 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (64764-155-18) </PackageDescription>
<NDC11Code>64764-0155-18</NDC11Code>
<ProductNDC>64764-155</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Actoplus Met</ProprietaryName>
<NonProprietaryName>Pioglitazone And Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050829</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021842</ApplicationNumber>
<LabelerName>Takeda Pharmaceuticals America, Inc.</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE; PIOGLITAZONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500; 15</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS], PPAR alpha [CS], PPAR gamma [CS], Peroxisome Proliferator Receptor alpha Agonist [EPC], Peroxisome Proliferator Receptor gamma Agonist [EPC], Peroxisome Proliferator-activated Receptor Activity [MoA], Thiazolidinedione [EPC], Thiazolidinediones [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-12-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050829</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71919-821-18</NDCCode>
<PackageDescription>50 VIAL, GLASS in 1 KIT (71919-821-18) / 1 KIT in 1 VIAL, GLASS (71919-821-01) * 750 PELLET in 1 VIAL, GLASS (68428-127-01) * 750 PELLET in 1 VIAL, GLASS (68428-124-01) * 750 PELLET in 1 VIAL, GLASS (68428-123-01) * 750 PELLET in 1 VIAL, GLASS (68428-122-01) * 750 PELLET in 1 VIAL, GLASS (68428-119-01) * 750 PELLET in 1 VIAL, GLASS (68428-146-01) * 750 PELLET in 1 VIAL, GLASS (68428-099-01) * 750 PELLET in 1 VIAL, GLASS (68428-098-01) * 750 PELLET in 1 VIAL, GLASS (68428-097-01) * 750 PELLET in 1 VIAL, GLASS (68428-144-01) * 750 PELLET in 1 VIAL, GLASS (68428-142-01) * 750 PELLET in 1 VIAL, GLASS (68428-148-01) * 750 PELLET in 1 VIAL, GLASS (68428-147-01) * 750 PELLET in 1 VIAL, GLASS (68428-105-01) * 750 PELLET in 1 VIAL, GLASS (68428-104-01) * 750 PELLET in 1 VIAL, GLASS (68428-103-01) * 750 PELLET in 1 VIAL, GLASS (68428-102-01) * 350 PELLET in 1 VIAL, GLASS (71919-768-01) * 750 PELLET in 1 VIAL, GLASS (68428-101-01) * 750 PELLET in 1 VIAL, GLASS (68428-154-01) * 750 PELLET in 1 VIAL, GLASS (68428-112-01) * 750 PELLET in 1 VIAL, GLASS (68428-111-01) * 750 PELLET in 1 VIAL, GLASS (68428-109-01) * 750 PELLET in 1 VIAL, GLASS (68428-108-01) * 750 PELLET in 1 VIAL, GLASS (68428-107-01) * 750 PELLET in 1 VIAL, GLASS (68428-106-01) * 750 PELLET in 1 VIAL, GLASS (68428-149-01) * 750 PELLET in 1 VIAL, GLASS (68428-118-01) * 750 PELLET in 1 VIAL, GLASS (68428-117-01) * 750 PELLET in 1 VIAL, GLASS (68428-115-01) * 750 PELLET in 1 VIAL, GLASS (68428-156-01) * 750 PELLET in 1 VIAL, GLASS (68428-114-01) * 750 PELLET in 1 VIAL, GLASS (68428-155-01) * 750 PELLET in 1 VIAL, GLASS (68428-086-01) * 750 PELLET in 1 VIAL, GLASS (68428-095-01) * 750 PELLET in 1 VIAL, GLASS (68428-138-01) * 750 PELLET in 1 VIAL, GLASS (68428-092-01) * 750 PELLET in 1 VIAL, GLASS (68428-091-01) * 750 PELLET in 1 VIAL, GLASS (68428-085-01) * 750 PELLET in 1 VIAL, GLASS (68428-090-01) * 750 PELLET in 1 VIAL, GLASS (68428-134-01) * 750 PELLET in 1 VIAL, GLASS (68428-133-01) * 750 PELLET in 1 VIAL, GLASS (68428-084-01) * 750 PELLET in 1 VIAL, GLASS (68428-083-01) * 750 PELLET in 1 VIAL, GLASS (68428-082-01) * 750 PELLET in 1 VIAL, GLASS (68428-080-01) * 750 PELLET in 1 VIAL, GLASS (68428-131-01) * 750 PELLET in 1 VIAL, GLASS (68428-078-01) * 750 PELLET in 1 VIAL, GLASS (68428-125-01) * 750 PELLET in 1 VIAL, GLASS (68428-077-01) </PackageDescription>
<NDC11Code>71919-0821-18</NDC11Code>
<ProductNDC>71919-821</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>30c Homeopathic Remedy Kit</ProprietaryName>
<NonProprietaryName>50 Remedy Kit</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240221</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-01-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240221</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acon nap fear. Aesculus hipp hemorrhoids. Allium cepa head cold. Antimon crud warts. Apis mel stings. Arnica bruises. Arsenicum alb vomiting. Belladonna fever. Bellis bruised soreness. Berber vulg itching. Bryonia worse motion. Calc carb overwork. Caulophyllum cramps. Causticum hoarseness. Chamomilla irritability. Cimicifuga minor back pain. Coffea cruda sleeplessness. Drosera cough. Eupatorium perf flu-like symptoms. Euphrasia eye irritation. Ferrum phos low fever. Gelsemium lethargy. Hamamelis varicose veins. Hepar sulph calc croupiness. Hydrastis sinuses. Hypericum shooting pain. Ignatia sadness. Ipecac nausea. Kali bic sinuses. Kali carb sour belching. Kali mur congested ears. Kali phos irritability. Lachesis sore throat. Ledum black eyes. Lycopodium digestion. Mag phos cramps. Nat mur sneezing. Nux vom vomiting. Petroleum nausea. Phosphoricum ac headache. Phytolacca sore throat. Podoph pelt diarrhea. Pulsatilla weeping. Rhus tox better motion. Ruta bruised feeling. Sepia indifference. Staphysag anger. Sulphur skin problems. Symphytum prickling pain. Thuja occ warts.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>84010-155-04</NDCCode>
<PackageDescription>18 mL in 1 BOTTLE (84010-155-04) </PackageDescription>
<NDC11Code>84010-0155-04</NDC11Code>
<ProductNDC>84010-155</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Johohula Common And Plantar Wart Remover</ProprietaryName>
<NonProprietaryName>Salicylic Acid 17% Common And Plantar Wart Remover</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20250717</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M028</ApplicationNumber>
<LabelerName>Jiangxi Hemei Pharmaceutical Co., Ltd</LabelerName>
<SubstanceName>SALICYLIC ACID</SubstanceName>
<StrengthNumber>17</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-08-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250717</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>■For the removal of common andplantar warts.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0942-6308-02</NDCCode>
<PackageDescription>70 mL in 1 BAG (0942-6308-02) </PackageDescription>
<NDC11Code>00942-6308-02</NDC11Code>
<ProductNDC>0942-6308</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cpda-1</ProprietaryName>
<NonProprietaryName>Anticoagulant Citrate Phosphate Dextrose Adenine</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20070301</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>BN770420</ApplicationNumber>
<LabelerName>Fenwal, Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE; ANHYDROUS CITRIC ACID; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; ADENINE</SubstanceName>
<StrengthNumber>2.23; 1.84; 209; 155; 19.3</StrengthNumber>
<StrengthUnit>g/70mL; g/70mL; mg/70mL; mg/70mL; mg/70mL</StrengthUnit>
<Pharm_Classes>Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-06-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0942-6326-04</NDCCode>
<PackageDescription>70 mL in 1 BAG (0942-6326-04) </PackageDescription>
<NDC11Code>00942-6326-04</NDC11Code>
<ProductNDC>0942-6326</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cpda-1</ProprietaryName>
<NonProprietaryName>Anticoagulant Citrate Phosphate Dextrose Adenine</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20081215</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>BN770420</ApplicationNumber>
<LabelerName>Fenwal, Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE; ANHYDROUS CITRIC ACID; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; ADENINE</SubstanceName>
<StrengthNumber>2.23; 1.84; 209; 155; 19.3</StrengthNumber>
<StrengthUnit>g/70mL; g/70mL; mg/70mL; mg/70mL; mg/70mL</StrengthUnit>
<Pharm_Classes>Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-06-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20081215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>10544-155-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (10544-155-30)</PackageDescription>
<NDC11Code>10544-0155-30</NDC11Code>
<ProductNDC>10544-155</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alprazolam</ProprietaryName>
<NonProprietaryName>Alprazolam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074174</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>ALPRAZOLAM</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>ALPRAZOLAM Tablets (alprazolam) are indicated for the management of anxiety disorder (a condition corresponding most closely to the APA Diagnostic and Statistical Manual [DSM-III-R] diagnosis of generalized anxiety disorder) or the short-term relief of symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. Generalized anxiety disorder is characterized by unrealistic or excessive anxiety and worry (apprehensive expectation) about two or more life circumstances, for a period of six months or longer, during which the person has been bothered more days than not by these concerns. At least 6 of the following 18 symptoms are often present in these patients: Motor Tension (trembling, twitching, or feeling shaky; muscle tension, aches, or soreness; restlessness; easy fatigability); Autonomic Hyperactivity (shortness of breath or smothering sensations; palpitations or accelerated heart rate; sweating, or cold clammy hands; dry mouth; dizziness or light-headedness; nausea, diarrhea, or other abdominal distress; flushes or chills; frequent urination; trouble swallowing or ‘lump in throat’); Vigilance and Scanning (feeling keyed up or on edge; exaggerated startle response; difficulty concentrating or ‘mind going blank’ because of anxiety; trouble falling or staying asleep; irritability). These symptoms must not be secondary to another psychiatric disorder or caused by some organic factor. Anxiety associated with depression is responsive to alprazolam.</IndicationAndUsage>
<Description>Alprazolam Tablets contain alprazolam which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-Chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-1] [1,4] benzodiazepine. The structural formula is represented to the right. Alprazolam is a white to off-white crystalline powder, which is soluble in methanol or ethanol but which has no appreciable solubility in water at physiological pH. Each ALPRAZOLAM Tablet, for oral administration, contains 0.25, 0.5, 1 or 2 mg of alprazolam. Inactive ingredients: crospovidone, docusate sodium, lactose, magnesium stearate, microcrystalline cellulose, silicon dioxide, sodium benzoate and starch 1500. In addition, the 0.5 mg tablet contains D&C Yellow No. 10 and the 1 mg and 2 mg tablet contains Green Lake Blend.</Description>
</NDC>
<NDC>
<NDCCode>10544-155-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (10544-155-60)</PackageDescription>
<NDC11Code>10544-0155-60</NDC11Code>
<ProductNDC>10544-155</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alprazolam</ProprietaryName>
<NonProprietaryName>Alprazolam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074174</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>ALPRAZOLAM</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>ALPRAZOLAM Tablets (alprazolam) are indicated for the management of anxiety disorder (a condition corresponding most closely to the APA Diagnostic and Statistical Manual [DSM-III-R] diagnosis of generalized anxiety disorder) or the short-term relief of symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. Generalized anxiety disorder is characterized by unrealistic or excessive anxiety and worry (apprehensive expectation) about two or more life circumstances, for a period of six months or longer, during which the person has been bothered more days than not by these concerns. At least 6 of the following 18 symptoms are often present in these patients: Motor Tension (trembling, twitching, or feeling shaky; muscle tension, aches, or soreness; restlessness; easy fatigability); Autonomic Hyperactivity (shortness of breath or smothering sensations; palpitations or accelerated heart rate; sweating, or cold clammy hands; dry mouth; dizziness or light-headedness; nausea, diarrhea, or other abdominal distress; flushes or chills; frequent urination; trouble swallowing or ‘lump in throat’); Vigilance and Scanning (feeling keyed up or on edge; exaggerated startle response; difficulty concentrating or ‘mind going blank’ because of anxiety; trouble falling or staying asleep; irritability). These symptoms must not be secondary to another psychiatric disorder or caused by some organic factor. Anxiety associated with depression is responsive to alprazolam.</IndicationAndUsage>
<Description>Alprazolam Tablets contain alprazolam which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-Chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-1] [1,4] benzodiazepine. The structural formula is represented to the right. Alprazolam is a white to off-white crystalline powder, which is soluble in methanol or ethanol but which has no appreciable solubility in water at physiological pH. Each ALPRAZOLAM Tablet, for oral administration, contains 0.25, 0.5, 1 or 2 mg of alprazolam. Inactive ingredients: crospovidone, docusate sodium, lactose, magnesium stearate, microcrystalline cellulose, silicon dioxide, sodium benzoate and starch 1500. In addition, the 0.5 mg tablet contains D&C Yellow No. 10 and the 1 mg and 2 mg tablet contains Green Lake Blend.</Description>
</NDC>
<NDC>
<NDCCode>10544-155-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (10544-155-90)</PackageDescription>
<NDC11Code>10544-0155-90</NDC11Code>
<ProductNDC>10544-155</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alprazolam</ProprietaryName>
<NonProprietaryName>Alprazolam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074174</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>ALPRAZOLAM</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>ALPRAZOLAM Tablets (alprazolam) are indicated for the management of anxiety disorder (a condition corresponding most closely to the APA Diagnostic and Statistical Manual [DSM-III-R] diagnosis of generalized anxiety disorder) or the short-term relief of symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. Generalized anxiety disorder is characterized by unrealistic or excessive anxiety and worry (apprehensive expectation) about two or more life circumstances, for a period of six months or longer, during which the person has been bothered more days than not by these concerns. At least 6 of the following 18 symptoms are often present in these patients: Motor Tension (trembling, twitching, or feeling shaky; muscle tension, aches, or soreness; restlessness; easy fatigability); Autonomic Hyperactivity (shortness of breath or smothering sensations; palpitations or accelerated heart rate; sweating, or cold clammy hands; dry mouth; dizziness or light-headedness; nausea, diarrhea, or other abdominal distress; flushes or chills; frequent urination; trouble swallowing or ‘lump in throat’); Vigilance and Scanning (feeling keyed up or on edge; exaggerated startle response; difficulty concentrating or ‘mind going blank’ because of anxiety; trouble falling or staying asleep; irritability). These symptoms must not be secondary to another psychiatric disorder or caused by some organic factor. Anxiety associated with depression is responsive to alprazolam.</IndicationAndUsage>
<Description>Alprazolam Tablets contain alprazolam which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-Chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-1] [1,4] benzodiazepine. The structural formula is represented to the right. Alprazolam is a white to off-white crystalline powder, which is soluble in methanol or ethanol but which has no appreciable solubility in water at physiological pH. Each ALPRAZOLAM Tablet, for oral administration, contains 0.25, 0.5, 1 or 2 mg of alprazolam. Inactive ingredients: crospovidone, docusate sodium, lactose, magnesium stearate, microcrystalline cellulose, silicon dioxide, sodium benzoate and starch 1500. In addition, the 0.5 mg tablet contains D&C Yellow No. 10 and the 1 mg and 2 mg tablet contains Green Lake Blend.</Description>
</NDC>
<NDC>
<NDCCode>37000-155-01</NDCCode>
<PackageDescription>2 CANISTER in 1 CELLO PACK (37000-155-01) > 48 g in 1 CANISTER</PackageDescription>
<NDC11Code>37000-0155-01</NDC11Code>
<ProductNDC>37000-155</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Old Spice Wild Collection</ProprietaryName>
<ProprietaryNameSuffix>Wolfthorn Invisible</ProprietaryNameSuffix>
<NonProprietaryName>Aluminum Zirconium Trichlorohydrex Gly</NonProprietaryName>
<DosageFormName>STICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20121101</StartMarketingDate>
<EndMarketingDate>20220101</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part350</ApplicationNumber>
<LabelerName>The Procter & Gamble Manufacturing Company</LabelerName>
<SubstanceName>ALUMINUM ZIRCONIUM TRICHLOROHYDREX GLY</SubstanceName>
<StrengthNumber>18</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20151229</StartMarketingDatePackage>
<EndMarketingDatePackage>20220101</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>37000-155-45</NDCCode>
<PackageDescription>45 g in 1 CANISTER (37000-155-45)</PackageDescription>
<NDC11Code>37000-0155-45</NDC11Code>
<ProductNDC>37000-155</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Old Spice Wild Collection</ProprietaryName>
<ProprietaryNameSuffix>Wolfthorn Invisible</ProprietaryNameSuffix>
<NonProprietaryName>Aluminum Zirconium Trichlorohydrex Gly</NonProprietaryName>
<DosageFormName>STICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20121101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part350</ApplicationNumber>
<LabelerName>Procter & Gamble Manufacturing Company</LabelerName>
<SubstanceName>ALUMINUM ZIRCONIUM TRICHLOROHYDREX GLY</SubstanceName>
<StrengthNumber>.18</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2015-06-16</LastUpdate>
</NDC>
<NDC>
<NDCCode>37000-155-48</NDCCode>
<PackageDescription>48 g in 1 CANISTER (37000-155-48) </PackageDescription>
<NDC11Code>37000-0155-48</NDC11Code>
<ProductNDC>37000-155</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Old Spice Wild Collection</ProprietaryName>
<ProprietaryNameSuffix>Wolfthorn Invisible</ProprietaryNameSuffix>
<NonProprietaryName>Aluminum Zirconium Trichlorohydrex Gly</NonProprietaryName>
<DosageFormName>STICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20121101</StartMarketingDate>
<EndMarketingDate>20220101</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part350</ApplicationNumber>
<LabelerName>The Procter & Gamble Manufacturing Company</LabelerName>
<SubstanceName>ALUMINUM ZIRCONIUM TRICHLOROHYDREX GLY</SubstanceName>
<StrengthNumber>18</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20151101</StartMarketingDatePackage>
<EndMarketingDatePackage>20220101</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>37000-155-73</NDCCode>
<PackageDescription>73 g in 1 CANISTER (37000-155-73) </PackageDescription>
<NDC11Code>37000-0155-73</NDC11Code>
<ProductNDC>37000-155</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Old Spice Wild Collection</ProprietaryName>
<ProprietaryNameSuffix>Wolfthorn Invisible</ProprietaryNameSuffix>
<NonProprietaryName>Aluminum Zirconium Trichlorohydrex Gly</NonProprietaryName>
<DosageFormName>STICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20121101</StartMarketingDate>
<EndMarketingDate>20220101</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part350</ApplicationNumber>
<LabelerName>The Procter & Gamble Manufacturing Company</LabelerName>
<SubstanceName>ALUMINUM ZIRCONIUM TRICHLOROHYDREX GLY</SubstanceName>
<StrengthNumber>18</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20121101</StartMarketingDatePackage>
<EndMarketingDatePackage>20220101</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>37000-155-96</NDCCode>
<PackageDescription>96 g in 1 CANISTER (37000-155-96) </PackageDescription>
<NDC11Code>37000-0155-96</NDC11Code>
<ProductNDC>37000-155</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Old Spice Wild Collection</ProprietaryName>
<ProprietaryNameSuffix>Wolfthorn Invisible</ProprietaryNameSuffix>
<NonProprietaryName>Aluminum Zirconium Trichlorohydrex Gly</NonProprietaryName>
<DosageFormName>STICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20121101</StartMarketingDate>
<EndMarketingDate>20220101</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part350</ApplicationNumber>
<LabelerName>The Procter & Gamble Manufacturing Company</LabelerName>
<SubstanceName>ALUMINUM ZIRCONIUM TRICHLOROHYDREX GLY</SubstanceName>
<StrengthNumber>18</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20151201</StartMarketingDatePackage>
<EndMarketingDatePackage>20220101</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>50021-061-01</NDCCode>
<PackageDescription>155 g in 1 CAN (50021-061-01)</PackageDescription>
<NDC11Code>50021-0061-01</NDC11Code>
<ProductNDC>50021-061</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sunzone Kids Spf 60</ProprietaryName>
<ProprietaryNameSuffix>Broad Spectrum</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate, Octocrylene, Octisalate, Oxybenzone, Avobenzone And Homosalate.</NonProprietaryName>
<DosageFormName>AEROSOL, SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20121116</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Empack Spraytech Inc.</LabelerName>
<SubstanceName>OCTINOXATE; OCTOCRYLENE; OCTISALATE; OXYBENZONE; AVOBENZONE; HOMOSALATE</SubstanceName>
<StrengthNumber>7.75; 7.75; 7.75; 9.3; 4.65; 18.6</StrengthNumber>
<StrengthUnit>g/155g; g/155g; g/155g; g/155g; g/155g; g/155g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Spray liberally and spread evenly by hand 15 minutes before sun exposure. Reapply. after 80 minutes of swimming or sweatingimmediately after towel dryingat least every 2 hours. Hold container 4 to 6 inches from the skin to apply. Do not spray directly into face. Spray on hand then apply to face. Do not apply in windy conditions. Use in a well-ventilated area.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>50021-062-01</NDCCode>
<PackageDescription>155 g in 1 CAN (50021-062-01)</PackageDescription>
<NDC11Code>50021-0062-01</NDC11Code>
<ProductNDC>50021-062</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sunzone Family Spf 60</ProprietaryName>
<ProprietaryNameSuffix>Broad Spectrum</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate, Octocrylene, Octisalate, Oxybenzone, Avobenzone And Homosalate.</NonProprietaryName>
<DosageFormName>AEROSOL, SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20121116</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Empack Spraytech Inc.</LabelerName>
<SubstanceName>OCTINOXATE; OCTOCRYLENE; OCTISALATE; OXYBENZONE; AVOBENZONE; HOMOSALATE</SubstanceName>
<StrengthNumber>7.75; 7.75; 7.75; 9.3; 4.65; 18.6</StrengthNumber>
<StrengthUnit>g/155g; g/155g; g/155g; g/155g; g/155g; g/155g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Spray liberally and spread evenly by hand 15 minutes before sun exposure. Reapply. after 80 minutes of swimming or sweatingimmediately after towel dryingat least every 2 hours. Hold container 4 to 6 inches from the skin to apply. Do not spray directly into face. Spray on hand then apply to face. Do not apply in windy conditions. Use in a well-ventilated area.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>50021-305-01</NDCCode>
<PackageDescription>155 g in 1 CAN (50021-305-01)</PackageDescription>
<NDC11Code>50021-0305-01</NDC11Code>
<ProductNDC>50021-305</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sunzone Sunscreen Sport Spf 60</ProprietaryName>
<ProprietaryNameSuffix>Broad Spectrum</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate, Octocrylene, Octisalate, Oxybenzone, Avobenzone And Homosalate.</NonProprietaryName>
<DosageFormName>AEROSOL, SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Empack Spraytech Inc.</LabelerName>
<SubstanceName>OCTINOXATE; OCTOCRYLENE; OCTISALATE; OXYBENZONE; AVOBENZONE; HOMOSALATE</SubstanceName>
<StrengthNumber>7.75; 7.75; 7.75; 9.3; 4.65; 18.6</StrengthNumber>
<StrengthUnit>g/155g; g/155g; g/155g; g/155g; g/155g; g/155g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Spray liberally and spread evenly by hand 15 minutes before sun exposure. Reapply. after 80 minutes of swimming or sweatingimmediately after towel dryingat least every 2 hours. Hold container 4 to 6 inches from the skin to apply. Do not spray directly into face. Spray on hand then apply to face. Do not apply in windy conditions. Use in a well-ventilated area.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>50090-3625-0</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (50090-3625-0) </PackageDescription>
<NDC11Code>50090-3625-00</NDC11Code>
<ProductNDC>50090-3625</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Xarelto</ProprietaryName>
<NonProprietaryName>Rivaroxaban</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110701</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022406</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>RIVAROXABAN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181006</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>XARELTO is a factor Xa inhibitor indicated: 1 to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation ( 1.1) , 2 for treatment of deep vein thrombosis (DVT) ( 1.2) , 3 for treatment of pulmonary embolism (PE) ( 1.3) , 4 for reduction in the risk of recurrence of DVT or PE ( 1.4) , 5 for the prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery ( 1.5) , 6 for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients ( 1.6) , 7 to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) ( 1.7) , 8 to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD ( 1.8) , 9 for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years ( 1.9) , 10 for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure ( 1.10) .</IndicationAndUsage>
<Description>Rivaroxaban, a factor Xa (FXa) inhibitor, is the active ingredient in XARELTO ® Tablets and XARELTO ® for oral suspension with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban is C 19H 18ClN 3O 5S and the molecular weight is 435.89. The structural formula is:. Rivaroxaban is a pure ( S)-enantiomer. It is an odorless, non-hygroscopic, white to yellowish powder. Rivaroxaban is only slightly soluble in organic solvents (e.g., acetone, polyethylene glycol 400) and is practically insoluble in water and aqueous media. Each XARELTO tablet contains 2.5 mg, 10 mg, 15 mg, or 20 mg of rivaroxaban. The inactive ingredients of XARELTO are: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for XARELTO 2.5 mg is Opadry ® Light Yellow, containing ferric oxide yellow, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 10 mg tablets is Opadry ® Pink and for XARELTO 15 mg tablets is Opadry ® Red, both containing ferric oxide red, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 20 mg tablets is Opadry ® II Dark Red, containing ferric oxide red, polyethylene glycol 3350, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. XARELTO for oral suspension is supplied as granules in bottles containing 155 mg of rivaroxaban (1 mg of rivaroxaban per mL after reconstitution). The inactive ingredients are: anhydrous citric acid, hypromellose, mannitol, microcrystalline cellulose and carboxymethylcellulose sodium, sodium benzoate, sucralose, sweet and creamy flavor and xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>50090-3625-1</NDCCode>
<PackageDescription>12 TABLET, FILM COATED in 1 BOTTLE (50090-3625-1) </PackageDescription>
<NDC11Code>50090-3625-01</NDC11Code>
<ProductNDC>50090-3625</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Xarelto</ProprietaryName>
<NonProprietaryName>Rivaroxaban</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110701</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022406</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>RIVAROXABAN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240515</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>XARELTO is a factor Xa inhibitor indicated: 1 to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation ( 1.1) , 2 for treatment of deep vein thrombosis (DVT) ( 1.2) , 3 for treatment of pulmonary embolism (PE) ( 1.3) , 4 for reduction in the risk of recurrence of DVT or PE ( 1.4) , 5 for the prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery ( 1.5) , 6 for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients ( 1.6) , 7 to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) ( 1.7) , 8 to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD ( 1.8) , 9 for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years ( 1.9) , 10 for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure ( 1.10) .</IndicationAndUsage>
<Description>Rivaroxaban, a factor Xa (FXa) inhibitor, is the active ingredient in XARELTO ® Tablets and XARELTO ® for oral suspension with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban is C 19H 18ClN 3O 5S and the molecular weight is 435.89. The structural formula is:. Rivaroxaban is a pure ( S)-enantiomer. It is an odorless, non-hygroscopic, white to yellowish powder. Rivaroxaban is only slightly soluble in organic solvents (e.g., acetone, polyethylene glycol 400) and is practically insoluble in water and aqueous media. Each XARELTO tablet contains 2.5 mg, 10 mg, 15 mg, or 20 mg of rivaroxaban. The inactive ingredients of XARELTO are: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for XARELTO 2.5 mg is Opadry ® Light Yellow, containing ferric oxide yellow, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 10 mg tablets is Opadry ® Pink and for XARELTO 15 mg tablets is Opadry ® Red, both containing ferric oxide red, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 20 mg tablets is Opadry ® II Dark Red, containing ferric oxide red, polyethylene glycol 3350, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. XARELTO for oral suspension is supplied as granules in bottles containing 155 mg of rivaroxaban (1 mg of rivaroxaban per mL after reconstitution). The inactive ingredients are: anhydrous citric acid, hypromellose, mannitol, microcrystalline cellulose and carboxymethylcellulose sodium, sodium benzoate, sucralose, sweet and creamy flavor and xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>50090-3639-0</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (50090-3639-0) </PackageDescription>
<NDC11Code>50090-3639-00</NDC11Code>
<ProductNDC>50090-3639</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Xarelto</ProprietaryName>
<NonProprietaryName>Rivaroxaban</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20111105</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022406</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>RIVAROXABAN</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181008</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>XARELTO is a factor Xa inhibitor indicated: 1 to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation ( 1.1) , 2 for treatment of deep vein thrombosis (DVT) ( 1.2) , 3 for treatment of pulmonary embolism (PE) ( 1.3) , 4 for reduction in the risk of recurrence of DVT or PE ( 1.4) , 5 for the prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery ( 1.5) , 6 for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients ( 1.6) , 7 to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) ( 1.7) , 8 to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD ( 1.8) , 9 for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years ( 1.9) , 10 for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure ( 1.10) .</IndicationAndUsage>
<Description>Rivaroxaban, a factor Xa (FXa) inhibitor, is the active ingredient in XARELTO ® Tablets and XARELTO ® for oral suspension with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban is C 19H 18ClN 3O 5S and the molecular weight is 435.89. The structural formula is:. Rivaroxaban is a pure ( S)-enantiomer. It is an odorless, non-hygroscopic, white to yellowish powder. Rivaroxaban is only slightly soluble in organic solvents (e.g., acetone, polyethylene glycol 400) and is practically insoluble in water and aqueous media. Each XARELTO tablet contains 2.5 mg, 10 mg, 15 mg, or 20 mg of rivaroxaban. The inactive ingredients of XARELTO are: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for XARELTO 2.5 mg is Opadry ® Light Yellow, containing ferric oxide yellow, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 10 mg tablets is Opadry ® Pink and for XARELTO 15 mg tablets is Opadry ® Red, both containing ferric oxide red, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 20 mg tablets is Opadry ® II Dark Red, containing ferric oxide red, polyethylene glycol 3350, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. XARELTO for oral suspension is supplied as granules in bottles containing 155 mg of rivaroxaban (1 mg of rivaroxaban per mL after reconstitution). The inactive ingredients are: anhydrous citric acid, hypromellose, mannitol, microcrystalline cellulose and carboxymethylcellulose sodium, sodium benzoate, sucralose, sweet and creamy flavor and xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>50090-4468-0</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (50090-4468-0) </PackageDescription>
<NDC11Code>50090-4468-00</NDC11Code>
<ProductNDC>50090-4468</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Xarelto</ProprietaryName>
<NonProprietaryName>Rivaroxaban</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20111105</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022406</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>RIVAROXABAN</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190816</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>XARELTO is a factor Xa inhibitor indicated: 1 to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation ( 1.1) , 2 for treatment of deep vein thrombosis (DVT) ( 1.2) , 3 for treatment of pulmonary embolism (PE) ( 1.3) , 4 for reduction in the risk of recurrence of DVT or PE ( 1.4) , 5 for the prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery ( 1.5) , 6 for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients ( 1.6) , 7 to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) ( 1.7) , 8 to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD ( 1.8) , 9 for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years ( 1.9) , 10 for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure ( 1.10) .</IndicationAndUsage>
<Description>Rivaroxaban, a factor Xa (FXa) inhibitor, is the active ingredient in XARELTO ® Tablets and XARELTO ® for oral suspension with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban is C 19H 18ClN 3O 5S and the molecular weight is 435.89. The structural formula is:. Rivaroxaban is a pure ( S)-enantiomer. It is an odorless, non-hygroscopic, white to yellowish powder. Rivaroxaban is only slightly soluble in organic solvents (e.g., acetone, polyethylene glycol 400) and is practically insoluble in water and aqueous media. Each XARELTO tablet contains 2.5 mg, 10 mg, 15 mg, or 20 mg of rivaroxaban. The inactive ingredients of XARELTO are: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for XARELTO 2.5 mg is Opadry ® Light Yellow, containing ferric oxide yellow, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 10 mg tablets is Opadry ® Pink and for XARELTO 15 mg tablets is Opadry ® Red, both containing ferric oxide red, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 20 mg tablets is Opadry ® II Dark Red, containing ferric oxide red, polyethylene glycol 3350, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. XARELTO for oral suspension is supplied as granules in bottles containing 155 mg of rivaroxaban (1 mg of rivaroxaban per mL after reconstitution). The inactive ingredients are: anhydrous citric acid, hypromellose, mannitol, microcrystalline cellulose and carboxymethylcellulose sodium, sodium benzoate, sucralose, sweet and creamy flavor and xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>50090-4469-0</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (50090-4469-0) </PackageDescription>
<NDC11Code>50090-4469-00</NDC11Code>
<ProductNDC>50090-4469</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Xarelto</ProprietaryName>
<NonProprietaryName>Rivaroxaban</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110701</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022406</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>RIVAROXABAN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190816</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>XARELTO is a factor Xa inhibitor indicated: 1 to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation ( 1.1) , 2 for treatment of deep vein thrombosis (DVT) ( 1.2) , 3 for treatment of pulmonary embolism (PE) ( 1.3) , 4 for reduction in the risk of recurrence of DVT or PE ( 1.4) , 5 for the prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery ( 1.5) , 6 for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients ( 1.6) , 7 to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) ( 1.7) , 8 to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD ( 1.8) , 9 for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years ( 1.9) , 10 for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure ( 1.10) .</IndicationAndUsage>
<Description>Rivaroxaban, a factor Xa (FXa) inhibitor, is the active ingredient in XARELTO ® Tablets and XARELTO ® for oral suspension with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban is C 19H 18ClN 3O 5S and the molecular weight is 435.89. The structural formula is:. Rivaroxaban is a pure ( S)-enantiomer. It is an odorless, non-hygroscopic, white to yellowish powder. Rivaroxaban is only slightly soluble in organic solvents (e.g., acetone, polyethylene glycol 400) and is practically insoluble in water and aqueous media. Each XARELTO tablet contains 2.5 mg, 10 mg, 15 mg, or 20 mg of rivaroxaban. The inactive ingredients of XARELTO are: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for XARELTO 2.5 mg is Opadry ® Light Yellow, containing ferric oxide yellow, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 10 mg tablets is Opadry ® Pink and for XARELTO 15 mg tablets is Opadry ® Red, both containing ferric oxide red, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 20 mg tablets is Opadry ® II Dark Red, containing ferric oxide red, polyethylene glycol 3350, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. XARELTO for oral suspension is supplied as granules in bottles containing 155 mg of rivaroxaban (1 mg of rivaroxaban per mL after reconstitution). The inactive ingredients are: anhydrous citric acid, hypromellose, mannitol, microcrystalline cellulose and carboxymethylcellulose sodium, sodium benzoate, sucralose, sweet and creamy flavor and xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>50458-575-01</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (50458-575-01) / 1 GRANULE, FOR SUSPENSION in 1 BOTTLE</PackageDescription>
<NDC11Code>50458-0575-01</NDC11Code>
<ProductNDC>50458-575</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Xarelto</ProprietaryName>
<NonProprietaryName>Rivaroxaban</NonProprietaryName>
<DosageFormName>GRANULE, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211201</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA215859</ApplicationNumber>
<LabelerName>Janssen Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>RIVAROXABAN</SubstanceName>
<StrengthNumber>155</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>XARELTO is a factor Xa inhibitor indicated: 1 to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation (1.1), 2 for treatment of deep vein thrombosis (DVT) (1.2), 3 for treatment of pulmonary embolism (PE) (1.3), 4 for reduction in the risk of recurrence of DVT or PE (1.4), 5 for the prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery (1.5), 6 for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients (1.6), 7 to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) (1.7), 8 to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD (1.8), 9 for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years (1.9), 10 for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure (1.10).</IndicationAndUsage>
<Description>Rivaroxaban, a factor Xa (FXa) inhibitor, is the active ingredient in XARELTO® Tablets and XARELTO® for oral suspension with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban is C19H18ClN3O5S and the molecular weight is 435.89. The structural formula is. Rivaroxaban is a pure (S)-enantiomer. It is an odorless, non-hygroscopic, white to yellowish powder. Rivaroxaban is only slightly soluble in organic solvents (e.g., acetone, polyethylene glycol 400) and is practically insoluble in water and aqueous media. Each XARELTO tablet contains 2.5 mg, 10 mg, 15 mg, or 20 mg of rivaroxaban. The inactive ingredients of XARELTO are: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for XARELTO 2.5 mg is Opadry® Light Yellow, containing ferric oxide yellow, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 10 mg tablets is Opadry® Pink and for XARELTO 15 mg tablets is Opadry® Red, both containing ferric oxide red, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 20 mg tablets is Opadry® II Dark Red, containing ferric oxide red, polyethylene glycol 3350, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. XARELTO for oral suspension is supplied as granules in bottles containing 155 mg of rivaroxaban (1 mg of rivaroxaban per mL after reconstitution). The inactive ingredients are: anhydrous citric acid, hypromellose, mannitol, microcrystalline cellulose and carboxymethylcellulose sodium, sodium benzoate, sucralose, sweet and creamy flavor and xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>50458-577-10</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BOX, UNIT-DOSE (50458-577-10) / 10 TABLET, FILM COATED in 1 BLISTER PACK (50458-577-01) </PackageDescription>
<NDC11Code>50458-0577-10</NDC11Code>
<ProductNDC>50458-577</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Xarelto</ProprietaryName>
<NonProprietaryName>Rivaroxaban</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181009</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022406</ApplicationNumber>
<LabelerName>Janssen Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>RIVAROXABAN</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181009</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>XARELTO is a factor Xa inhibitor indicated: 1 to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation (1.1), 2 for treatment of deep vein thrombosis (DVT) (1.2), 3 for treatment of pulmonary embolism (PE) (1.3), 4 for reduction in the risk of recurrence of DVT or PE (1.4), 5 for the prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery (1.5), 6 for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients (1.6), 7 to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) (1.7), 8 to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD (1.8), 9 for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years (1.9), 10 for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure (1.10).</IndicationAndUsage>
<Description>Rivaroxaban, a factor Xa (FXa) inhibitor, is the active ingredient in XARELTO® Tablets and XARELTO® for oral suspension with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban is C19H18ClN3O5S and the molecular weight is 435.89. The structural formula is. Rivaroxaban is a pure (S)-enantiomer. It is an odorless, non-hygroscopic, white to yellowish powder. Rivaroxaban is only slightly soluble in organic solvents (e.g., acetone, polyethylene glycol 400) and is practically insoluble in water and aqueous media. Each XARELTO tablet contains 2.5 mg, 10 mg, 15 mg, or 20 mg of rivaroxaban. The inactive ingredients of XARELTO are: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for XARELTO 2.5 mg is Opadry® Light Yellow, containing ferric oxide yellow, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 10 mg tablets is Opadry® Pink and for XARELTO 15 mg tablets is Opadry® Red, both containing ferric oxide red, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 20 mg tablets is Opadry® II Dark Red, containing ferric oxide red, polyethylene glycol 3350, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. XARELTO for oral suspension is supplied as granules in bottles containing 155 mg of rivaroxaban (1 mg of rivaroxaban per mL after reconstitution). The inactive ingredients are: anhydrous citric acid, hypromellose, mannitol, microcrystalline cellulose and carboxymethylcellulose sodium, sodium benzoate, sucralose, sweet and creamy flavor and xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>50458-577-14</NDCCode>
<PackageDescription>14 TABLET, FILM COATED in 1 BOTTLE (50458-577-14) </PackageDescription>
<NDC11Code>50458-0577-14</NDC11Code>
<ProductNDC>50458-577</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Xarelto</ProprietaryName>
<NonProprietaryName>Rivaroxaban</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181009</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022406</ApplicationNumber>
<LabelerName>Janssen Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>RIVAROXABAN</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181009</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>XARELTO is a factor Xa inhibitor indicated: 1 to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation (1.1), 2 for treatment of deep vein thrombosis (DVT) (1.2), 3 for treatment of pulmonary embolism (PE) (1.3), 4 for reduction in the risk of recurrence of DVT or PE (1.4), 5 for the prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery (1.5), 6 for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients (1.6), 7 to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) (1.7), 8 to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD (1.8), 9 for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years (1.9), 10 for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure (1.10).</IndicationAndUsage>
<Description>Rivaroxaban, a factor Xa (FXa) inhibitor, is the active ingredient in XARELTO® Tablets and XARELTO® for oral suspension with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban is C19H18ClN3O5S and the molecular weight is 435.89. The structural formula is. Rivaroxaban is a pure (S)-enantiomer. It is an odorless, non-hygroscopic, white to yellowish powder. Rivaroxaban is only slightly soluble in organic solvents (e.g., acetone, polyethylene glycol 400) and is practically insoluble in water and aqueous media. Each XARELTO tablet contains 2.5 mg, 10 mg, 15 mg, or 20 mg of rivaroxaban. The inactive ingredients of XARELTO are: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for XARELTO 2.5 mg is Opadry® Light Yellow, containing ferric oxide yellow, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 10 mg tablets is Opadry® Pink and for XARELTO 15 mg tablets is Opadry® Red, both containing ferric oxide red, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 20 mg tablets is Opadry® II Dark Red, containing ferric oxide red, polyethylene glycol 3350, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. XARELTO for oral suspension is supplied as granules in bottles containing 155 mg of rivaroxaban (1 mg of rivaroxaban per mL after reconstitution). The inactive ingredients are: anhydrous citric acid, hypromellose, mannitol, microcrystalline cellulose and carboxymethylcellulose sodium, sodium benzoate, sucralose, sweet and creamy flavor and xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>50458-577-18</NDCCode>
<PackageDescription>180 TABLET, FILM COATED in 1 BOTTLE (50458-577-18) </PackageDescription>
<NDC11Code>50458-0577-18</NDC11Code>
<ProductNDC>50458-577</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Xarelto</ProprietaryName>
<NonProprietaryName>Rivaroxaban</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181009</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022406</ApplicationNumber>
<LabelerName>Janssen Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>RIVAROXABAN</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181009</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>XARELTO is a factor Xa inhibitor indicated: 1 to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation (1.1), 2 for treatment of deep vein thrombosis (DVT) (1.2), 3 for treatment of pulmonary embolism (PE) (1.3), 4 for reduction in the risk of recurrence of DVT or PE (1.4), 5 for the prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery (1.5), 6 for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients (1.6), 7 to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) (1.7), 8 to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD (1.8), 9 for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years (1.9), 10 for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure (1.10).</IndicationAndUsage>
<Description>Rivaroxaban, a factor Xa (FXa) inhibitor, is the active ingredient in XARELTO® Tablets and XARELTO® for oral suspension with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban is C19H18ClN3O5S and the molecular weight is 435.89. The structural formula is. Rivaroxaban is a pure (S)-enantiomer. It is an odorless, non-hygroscopic, white to yellowish powder. Rivaroxaban is only slightly soluble in organic solvents (e.g., acetone, polyethylene glycol 400) and is practically insoluble in water and aqueous media. Each XARELTO tablet contains 2.5 mg, 10 mg, 15 mg, or 20 mg of rivaroxaban. The inactive ingredients of XARELTO are: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for XARELTO 2.5 mg is Opadry® Light Yellow, containing ferric oxide yellow, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 10 mg tablets is Opadry® Pink and for XARELTO 15 mg tablets is Opadry® Red, both containing ferric oxide red, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 20 mg tablets is Opadry® II Dark Red, containing ferric oxide red, polyethylene glycol 3350, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. XARELTO for oral suspension is supplied as granules in bottles containing 155 mg of rivaroxaban (1 mg of rivaroxaban per mL after reconstitution). The inactive ingredients are: anhydrous citric acid, hypromellose, mannitol, microcrystalline cellulose and carboxymethylcellulose sodium, sodium benzoate, sucralose, sweet and creamy flavor and xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>50458-577-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (50458-577-60) </PackageDescription>
<NDC11Code>50458-0577-60</NDC11Code>
<ProductNDC>50458-577</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Xarelto</ProprietaryName>
<NonProprietaryName>Rivaroxaban</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181009</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022406</ApplicationNumber>
<LabelerName>Janssen Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>RIVAROXABAN</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181009</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>XARELTO is a factor Xa inhibitor indicated: 1 to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation (1.1), 2 for treatment of deep vein thrombosis (DVT) (1.2), 3 for treatment of pulmonary embolism (PE) (1.3), 4 for reduction in the risk of recurrence of DVT or PE (1.4), 5 for the prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery (1.5), 6 for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients (1.6), 7 to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) (1.7), 8 to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD (1.8), 9 for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years (1.9), 10 for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure (1.10).</IndicationAndUsage>
<Description>Rivaroxaban, a factor Xa (FXa) inhibitor, is the active ingredient in XARELTO® Tablets and XARELTO® for oral suspension with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban is C19H18ClN3O5S and the molecular weight is 435.89. The structural formula is. Rivaroxaban is a pure (S)-enantiomer. It is an odorless, non-hygroscopic, white to yellowish powder. Rivaroxaban is only slightly soluble in organic solvents (e.g., acetone, polyethylene glycol 400) and is practically insoluble in water and aqueous media. Each XARELTO tablet contains 2.5 mg, 10 mg, 15 mg, or 20 mg of rivaroxaban. The inactive ingredients of XARELTO are: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for XARELTO 2.5 mg is Opadry® Light Yellow, containing ferric oxide yellow, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 10 mg tablets is Opadry® Pink and for XARELTO 15 mg tablets is Opadry® Red, both containing ferric oxide red, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 20 mg tablets is Opadry® II Dark Red, containing ferric oxide red, polyethylene glycol 3350, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. XARELTO for oral suspension is supplied as granules in bottles containing 155 mg of rivaroxaban (1 mg of rivaroxaban per mL after reconstitution). The inactive ingredients are: anhydrous citric acid, hypromellose, mannitol, microcrystalline cellulose and carboxymethylcellulose sodium, sodium benzoate, sucralose, sweet and creamy flavor and xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>50458-578-07</NDCCode>
<PackageDescription>7 TABLET, FILM COATED in 1 BOTTLE (50458-578-07) </PackageDescription>
<NDC11Code>50458-0578-07</NDC11Code>
<ProductNDC>50458-578</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Xarelto</ProprietaryName>
<NonProprietaryName>Rivaroxaban</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20111104</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022406</ApplicationNumber>
<LabelerName>Janssen Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>RIVAROXABAN</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160920</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>XARELTO is a factor Xa inhibitor indicated: 1 to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation (1.1), 2 for treatment of deep vein thrombosis (DVT) (1.2), 3 for treatment of pulmonary embolism (PE) (1.3), 4 for reduction in the risk of recurrence of DVT or PE (1.4), 5 for the prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery (1.5), 6 for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients (1.6), 7 to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) (1.7), 8 to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD (1.8), 9 for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years (1.9), 10 for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure (1.10).</IndicationAndUsage>
<Description>Rivaroxaban, a factor Xa (FXa) inhibitor, is the active ingredient in XARELTO® Tablets and XARELTO® for oral suspension with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban is C19H18ClN3O5S and the molecular weight is 435.89. The structural formula is. Rivaroxaban is a pure (S)-enantiomer. It is an odorless, non-hygroscopic, white to yellowish powder. Rivaroxaban is only slightly soluble in organic solvents (e.g., acetone, polyethylene glycol 400) and is practically insoluble in water and aqueous media. Each XARELTO tablet contains 2.5 mg, 10 mg, 15 mg, or 20 mg of rivaroxaban. The inactive ingredients of XARELTO are: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for XARELTO 2.5 mg is Opadry® Light Yellow, containing ferric oxide yellow, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 10 mg tablets is Opadry® Pink and for XARELTO 15 mg tablets is Opadry® Red, both containing ferric oxide red, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 20 mg tablets is Opadry® II Dark Red, containing ferric oxide red, polyethylene glycol 3350, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. XARELTO for oral suspension is supplied as granules in bottles containing 155 mg of rivaroxaban (1 mg of rivaroxaban per mL after reconstitution). The inactive ingredients are: anhydrous citric acid, hypromellose, mannitol, microcrystalline cellulose and carboxymethylcellulose sodium, sodium benzoate, sucralose, sweet and creamy flavor and xanthan gum.</Description>
</NDC>
</NDCList>