{
"NDC": [
{
"NDCCode": "80425-0155-5",
"PackageDescription": "180 TABLET, FILM COATED in 1 BOTTLE (80425-0155-5) ",
"NDC11Code": "80425-0155-05",
"ProductNDC": "80425-0155",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hcl",
"NonProprietaryName": "Cyclobenzaprine Hcl",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200706",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213324",
"LabelerName": "Advanced Rx Pharmacy of Tennessee, LLC",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230330",
"SamplePackage": "N",
"IndicationAndUsage": "INDICATIONS AND USAGE. Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white to off-white, odorless, crystalline powder with the molecular formula C20H21NHCl and a molecular weight of 311.85. It has a melting point between 215°C to 219°C and a pKa of 8.47. It is freely soluble in water, in alcohol, and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride, insoluble in n-Hexane. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H-Dibenzo[a,d] cyclohepten-5 ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Cyclobenzaprine hydrochloride USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 7.5 mg is supplied as a 7.5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets, USP 5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide and triacetin. Cyclobenzaprine hydrochloride tablets, USP 7.5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. Cyclobenzaprine hydrochloride tablets, USP 10 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, FD&C Blue No. 2 Aluminium Lake, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide."
},
{
"NDCCode": "80425-0155-1",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (80425-0155-1) ",
"NDC11Code": "80425-0155-01",
"ProductNDC": "80425-0155",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hcl",
"NonProprietaryName": "Cyclobenzaprine Hcl",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200706",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213324",
"LabelerName": "Advanced Rx Pharmacy of Tennessee, LLC",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230330",
"SamplePackage": "N",
"IndicationAndUsage": "INDICATIONS AND USAGE. Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white to off-white, odorless, crystalline powder with the molecular formula C20H21NHCl and a molecular weight of 311.85. It has a melting point between 215°C to 219°C and a pKa of 8.47. It is freely soluble in water, in alcohol, and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride, insoluble in n-Hexane. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H-Dibenzo[a,d] cyclohepten-5 ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Cyclobenzaprine hydrochloride USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 7.5 mg is supplied as a 7.5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets, USP 5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide and triacetin. Cyclobenzaprine hydrochloride tablets, USP 7.5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. Cyclobenzaprine hydrochloride tablets, USP 10 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, FD&C Blue No. 2 Aluminium Lake, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide."
},
{
"NDCCode": "80425-0155-2",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (80425-0155-2) ",
"NDC11Code": "80425-0155-02",
"ProductNDC": "80425-0155",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hcl",
"NonProprietaryName": "Cyclobenzaprine Hcl",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200706",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213324",
"LabelerName": "Advanced Rx Pharmacy of Tennessee, LLC",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230330",
"SamplePackage": "N",
"IndicationAndUsage": "INDICATIONS AND USAGE. Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white to off-white, odorless, crystalline powder with the molecular formula C20H21NHCl and a molecular weight of 311.85. It has a melting point between 215°C to 219°C and a pKa of 8.47. It is freely soluble in water, in alcohol, and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride, insoluble in n-Hexane. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H-Dibenzo[a,d] cyclohepten-5 ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Cyclobenzaprine hydrochloride USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 7.5 mg is supplied as a 7.5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets, USP 5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide and triacetin. Cyclobenzaprine hydrochloride tablets, USP 7.5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. Cyclobenzaprine hydrochloride tablets, USP 10 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, FD&C Blue No. 2 Aluminium Lake, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide."
},
{
"NDCCode": "80425-0155-3",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (80425-0155-3) ",
"NDC11Code": "80425-0155-03",
"ProductNDC": "80425-0155",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hcl",
"NonProprietaryName": "Cyclobenzaprine Hcl",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200706",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213324",
"LabelerName": "Advanced Rx Pharmacy of Tennessee, LLC",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230330",
"SamplePackage": "N",
"IndicationAndUsage": "INDICATIONS AND USAGE. Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white to off-white, odorless, crystalline powder with the molecular formula C20H21NHCl and a molecular weight of 311.85. It has a melting point between 215°C to 219°C and a pKa of 8.47. It is freely soluble in water, in alcohol, and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride, insoluble in n-Hexane. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H-Dibenzo[a,d] cyclohepten-5 ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Cyclobenzaprine hydrochloride USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 7.5 mg is supplied as a 7.5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets, USP 5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide and triacetin. Cyclobenzaprine hydrochloride tablets, USP 7.5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. Cyclobenzaprine hydrochloride tablets, USP 10 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, FD&C Blue No. 2 Aluminium Lake, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide."
},
{
"NDCCode": "80425-0155-4",
"PackageDescription": "120 TABLET, FILM COATED in 1 BOTTLE (80425-0155-4) ",
"NDC11Code": "80425-0155-04",
"ProductNDC": "80425-0155",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hcl",
"NonProprietaryName": "Cyclobenzaprine Hcl",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200706",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213324",
"LabelerName": "Advanced Rx Pharmacy of Tennessee, LLC",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230330",
"SamplePackage": "N",
"IndicationAndUsage": "INDICATIONS AND USAGE. Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white to off-white, odorless, crystalline powder with the molecular formula C20H21NHCl and a molecular weight of 311.85. It has a melting point between 215°C to 219°C and a pKa of 8.47. It is freely soluble in water, in alcohol, and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride, insoluble in n-Hexane. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H-Dibenzo[a,d] cyclohepten-5 ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Cyclobenzaprine hydrochloride USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 7.5 mg is supplied as a 7.5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets, USP 5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide and triacetin. Cyclobenzaprine hydrochloride tablets, USP 7.5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. Cyclobenzaprine hydrochloride tablets, USP 10 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, FD&C Blue No. 2 Aluminium Lake, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide."
},
{
"NDCCode": "15631-0155-5",
"PackageDescription": "12500 PELLET in 1 PACKAGE (15631-0155-5) ",
"NDC11Code": "15631-0155-05",
"ProductNDC": "15631-0155",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Convallaria Majalis",
"NonProprietaryName": "Convallaria Majalis",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20151002",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Rxhomeo Private Limited d.b.a. Rxhomeo, Inc",
"SubstanceName": "CONVALLARIA MAJALIS",
"StrengthNumber": "3",
"StrengthUnit": "[hp_X]/1",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180101",
"SamplePackage": "N",
"IndicationAndUsage": "Condition listed above or as directed by the physician."
},
{
"NDCCode": "17856-0155-1",
"PackageDescription": "72 CUP, UNIT-DOSE in 1 BOX, UNIT-DOSE (17856-0155-1) / 5 mL in 1 CUP, UNIT-DOSE",
"NDC11Code": "17856-0155-01",
"ProductNDC": "17856-0155",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Promethazine Hydrochloride And Dextromethorphan Hydrobromide Oral Solution",
"NonProprietaryName": "Promethazine Hydrochloride And Dextromethorphan Hydrobromide Oral Solution",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20201005",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040649",
"LabelerName": "ATLANTIC BIOLOGICALS CORP.",
"SubstanceName": "DEXTROMETHORPHAN HYDROBROMIDE; PROMETHAZINE HYDROCHLORIDE",
"StrengthNumber": "15; 6.25",
"StrengthUnit": "mg/5mL; mg/5mL",
"Pharm_Classes": "Phenothiazine [EPC], Phenothiazines [CS], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230913",
"SamplePackage": "N",
"IndicationAndUsage": "Promethazine hydrochloride and dextromethorphan hydrobromide oral solution is indicated for the temporary relief of coughs and upper respiratory symptoms associated with allergy or the common cold.",
"Description": "Each 5 mL (one teaspoonful), for oral administration contains: Dextromethorphan hydrobromide 15 mg; promethazine hydrochloride 6.25 mg. Alcohol 7%. Inactive Ingredients: Ascorbic acid, citric acid, D&C yellow #10, FD&C yellow #6, menthol, methylparaben, orange pineapple flavor, propylene glycol, propylparaben, purified water, saccharin sodium, sodium benzoate, sodium citrate and sucrose. Dextromethorphan hydrobromide is a salt of the methyl ether of the dextrorotatory isomer of levorphanol, a narcotic analgesic. It is chemically designated as 3-methoxy-17-methyl-9α, 13α, 14α-morphinan hydrobromide monohydrate. Dextromethorphan hydrobromide occurs as white crystals sparingly soluble in water and freely soluble in alcohol. It has a molecular weight of 370.32, a molecular formula of C 18H 25NOHBrH 2O, and the following structural formula:. Promethazine is a racemic compound. Promethazine hydrochloride, a phenothiazine derivative, is chemically designated as 10 H-Phenothiazine-10-ethanamine, N, N, α-trimethyl-monohydrochloride. Promethazine hydrochloride occurs as a white to faint yellow, practically odorless, crystalline powder which slowly oxidizes and turns blue on prolonged exposure to air. It is soluble in water and freely soluble in alcohol. It has a molecular weight of 320.88, a molecular formula of C 17H 20N 2SHCI, and the following structural formula:."
},
{
"NDCCode": "38779-0155-5",
"PackageDescription": "100 g in 1 JAR (38779-0155-5) ",
"NDC11Code": "38779-0155-05",
"ProductNDC": "38779-0155",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Prilocaine Hydrochloride",
"DosageFormName": "POWDER",
"StartMarketingDate": "20140612",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Medisca Inc.",
"SubstanceName": "PRILOCAINE HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Unfinished",
"LastUpdate": "2025-11-14",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "12-JUN-14"
},
{
"NDCCode": "49288-0155-2",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (49288-0155-2)",
"NDC11Code": "49288-0155-02",
"ProductNDC": "49288-0155",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cumin",
"NonProprietaryName": "Cumin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "CUMIN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Plant Allergenic Extract [EPC],Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Plant Proteins [CS],Food Additives [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0155-5",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (49288-0155-5)",
"NDC11Code": "49288-0155-05",
"ProductNDC": "49288-0155",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cumin",
"NonProprietaryName": "Cumin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "CUMIN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Plant Allergenic Extract [EPC],Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Plant Proteins [CS],Food Additives [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "50090-0155-5",
"PackageDescription": "15 TABLET, FILM COATED in 1 BOTTLE (50090-0155-5) ",
"NDC11Code": "50090-0155-05",
"ProductNDC": "50090-0155",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sudogest",
"NonProprietaryName": "Pseudoephedrine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19841207",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "PSEUDOEPHEDRINE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20141128",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves nasal congestion due to the common cold, hay fever or other upper respiratory allergies. temporarily relieves sinus congestion and pressure ."
},
{
"NDCCode": "55154-0155-5",
"PackageDescription": "6 PACKET in 1 BAG (55154-0155-5) > .9 g in 1 PACKET",
"NDC11Code": "55154-0155-05",
"ProductNDC": "55154-0155",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Bacitracin Zinc",
"NonProprietaryName": "Bacitracin Zinc",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20110602",
"EndMarketingDate": "20180131",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part333B",
"LabelerName": "Cardinal Health",
"SubstanceName": "BACITRACIN ZINC",
"StrengthNumber": "500",
"StrengthUnit": "[USP'U]/g",
"Status": "Deprecated",
"LastUpdate": "2018-02-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231",
"StartMarketingDatePackage": "20110602",
"EndMarketingDatePackage": "20180131",
"SamplePackage": "N"
},
{
"NDCCode": "68554-0155-1",
"PackageDescription": "5 kg in 1 DRUM (68554-0155-1) ",
"NDC11Code": "68554-0155-01",
"ProductNDC": "68554-0155",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Elagolix Sodium",
"DosageFormName": "POWDER",
"StartMarketingDate": "20180723",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "HETERO LABS LIMITED",
"SubstanceName": "ELAGOLIX SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2023-11-27",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "23-JUL-18"
},
{
"NDCCode": "71335-0155-5",
"PackageDescription": "120 CAPSULE in 1 BOTTLE (71335-0155-5) ",
"NDC11Code": "71335-0155-05",
"ProductNDC": "71335-0155",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nortriptyline Hydrochloride",
"NonProprietaryName": "Nortriptyline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20000508",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075520",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "NORTRIPTYLINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tricyclic Antidepressant [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120203",
"SamplePackage": "N",
"IndicationAndUsage": "Nortriptyline hydrochloride is indicated for the relief of symptoms of depression. Endogenous depressions are more likely to be alleviated than are other depressive states.",
"Description": "Nortriptyline Hydrochloride, USP is 1-propanamine, 3-(10,11-dihydro-5H-dibenzo[a,d]cyclohepten-5-ylidene)-N-methyl, hydrochloride. The structural formula is as follows. C19H21N∙HCl MW = 299.84. C19H21N∙HCl MW = 299.84. Each capsule, for oral administration, contains nortriptyline hydrochloride equivalent to 10 mg, 25 mg, 50 mg, and 75 mg of nortriptyline hydrochloride USP. In addition, each capsule contains the following inactive ingredients: black iron oxide, colloidal silicon dioxide, D&C Yellow #10 (aluminum lake), D&C Yellow #10, FD&C Blue #1 (aluminum lake), FD&C Blue #2 (aluminum lake), FD&C Green #3 (10, 50 and 75 mg only), FD&C Red #40 (aluminum lake), gelatin, I.M.S. 74 OP, magnesium stearate, pregelatinized corn starch, shellac, sodium lauryl sulfate and titanium dioxide."
},
{
"NDCCode": "71858-0155-1",
"PackageDescription": "2 POUCH in 1 CARTON (71858-0155-1) / 5 AMPULE in 1 POUCH (71858-0155-4) / 1 mL in 1 AMPULE (71858-0155-6) ",
"NDC11Code": "71858-0155-01",
"ProductNDC": "71858-0155",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tirosint",
"ProprietaryNameSuffix": "Sol",
"NonProprietaryName": "Levothyroxine Sodium",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20190301",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA206977",
"LabelerName": "IBSA Pharma Inc.",
"SubstanceName": "LEVOTHYROXINE SODIUM",
"StrengthNumber": "175",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Thyroxine [CS], l-Thyroxine [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190301",
"EndMarketingDatePackage": "20260131",
"SamplePackage": "Y",
"IndicationAndUsage": "TIROSINT-SOL is L-thyroxine (T4) indicated in adult and pediatric patients, including neonates, for: 1 Hypothyroidism - As replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism ( 1) , 2 Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression - As an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer ( 1) .",
"Description": "TIROSINT-SOL (levothyroxine sodium) oral solution contains synthetic L-3,3',5,5'-tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15H 10I 4NNaO 4 ∙ x H 2O (where x = 5), molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown:. TIROSINT-SOL oral solution is a clear, colorless to slightly yellow solution supplied in a 1 mL white, non-transparent, unit-dose ampule and is available in the following strengths (mcg/mL): 13, 25, 37.5, 44, 50, 62.5, 75, 88, 100, 112, 125, 137, 150, 175, 200. The inactive ingredients in TIROSINT-SOL are glycerol and water."
},
{
"NDCCode": "71858-0155-2",
"PackageDescription": "6 POUCH in 1 CARTON (71858-0155-2) / 5 AMPULE in 1 POUCH (71858-0155-4) / 1 mL in 1 AMPULE (71858-0155-6) ",
"NDC11Code": "71858-0155-02",
"ProductNDC": "71858-0155",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tirosint",
"ProprietaryNameSuffix": "Sol",
"NonProprietaryName": "Levothyroxine Sodium",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20190301",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA206977",
"LabelerName": "IBSA Pharma Inc.",
"SubstanceName": "LEVOTHYROXINE SODIUM",
"StrengthNumber": "175",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Thyroxine [CS], l-Thyroxine [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250725",
"SamplePackage": "Y",
"IndicationAndUsage": "TIROSINT-SOL is L-thyroxine (T4) indicated in adult and pediatric patients, including neonates, for: 1 Hypothyroidism - As replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism ( 1) , 2 Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression - As an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer ( 1) .",
"Description": "TIROSINT-SOL (levothyroxine sodium) oral solution contains synthetic L-3,3',5,5'-tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15H 10I 4NNaO 4 ∙ x H 2O (where x = 5), molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown:. TIROSINT-SOL oral solution is a clear, colorless to slightly yellow solution supplied in a 1 mL white, non-transparent, unit-dose ampule and is available in the following strengths (mcg/mL): 13, 25, 37.5, 44, 50, 62.5, 75, 88, 100, 112, 125, 137, 150, 175, 200. The inactive ingredients in TIROSINT-SOL are glycerol and water."
},
{
"NDCCode": "71858-0155-5",
"PackageDescription": "6 POUCH in 1 CARTON (71858-0155-5) / 5 AMPULE in 1 POUCH (71858-0155-4) / 1 mL in 1 AMPULE (71858-0155-6) ",
"NDC11Code": "71858-0155-05",
"ProductNDC": "71858-0155",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tirosint",
"ProprietaryNameSuffix": "Sol",
"NonProprietaryName": "Levothyroxine Sodium",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20190301",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA206977",
"LabelerName": "IBSA Pharma Inc.",
"SubstanceName": "LEVOTHYROXINE SODIUM",
"StrengthNumber": "175",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Thyroxine [CS], l-Thyroxine [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190301",
"SamplePackage": "N",
"IndicationAndUsage": "TIROSINT-SOL is L-thyroxine (T4) indicated in adult and pediatric patients, including neonates, for: 1 Hypothyroidism - As replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism ( 1) , 2 Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression - As an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer ( 1) .",
"Description": "TIROSINT-SOL (levothyroxine sodium) oral solution contains synthetic L-3,3',5,5'-tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15H 10I 4NNaO 4 ∙ x H 2O (where x = 5), molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown:. TIROSINT-SOL oral solution is a clear, colorless to slightly yellow solution supplied in a 1 mL white, non-transparent, unit-dose ampule and is available in the following strengths (mcg/mL): 13, 25, 37.5, 44, 50, 62.5, 75, 88, 100, 112, 125, 137, 150, 175, 200. The inactive ingredients in TIROSINT-SOL are glycerol and water."
},
{
"NDCCode": "80425-0004-4",
"PackageDescription": "5 CAPSULE in 1 BOTTLE (80425-0004-4) ",
"NDC11Code": "80425-0004-04",
"ProductNDC": "80425-0004",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cephalexin",
"NonProprietaryName": "Cephalexin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20220914",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065253",
"LabelerName": "ADVANCED RX PHARMACY OF TENNESSEE, LLC",
"SubstanceName": "CEPHALEXIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2024-03-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240118",
"SamplePackage": "N",
"IndicationAndUsage": "1.1 Respiratory Tract Infections. Cephalexin capsules are indicated for the treatment of respiratory tract infections caused by susceptible isolates of Streptococcus pneumoniae and Streptococcus pyogenes. 1.2 Otitis Media. Cephalexin capsules are indicated for the treatment of otitis media caused by susceptible isolates of Streptococcus pneumoniae, Haemophilus influenzae, Staphylococcus aureus, Streptococcus pyogenes, and Moraxella catarrhalis. 1.3 Skin and Skin Structure Infections. Cephalexin capsules are indicated for the treatment of skin and skin structure infections caused by susceptible isolates of the following Gram-positive bacteria: Staphylococcus aureus and Streptococcus pyogenes. 1.4 Bone Infections. Cephalexin capsules are indicated for the treatment of bone infections caused by susceptible isolates of Staphylococcus aureus and Proteus mirabilis. 1.5 Genitourinary Tract Infections. Cephalexin capsules are indicated for the treatment of genitourinary tract infections, including acute prostatitis, caused by susceptible isolates of Escherichia coli, Proteus mirabilis, and Klebsiella pneumoniae. 1.6 Usage. To reduce the development of drug-resistant bacteria and maintain the effectiveness of cephalexin capsules and other antibacterial drugs, cephalexin capsules should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information is available, this information should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Cephalexin capsules, USP is a semisynthetic cephalosporin antibacterial drug intended for oral administration. It is 7-(D-α-Amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid monohydrate. Cephalexin has the molecular formula C16H17N3O4SH2O and the molecular weight is 365.41. Cephalexin has the following structural formula. Each capsule contains cephalexin monohydrate equivalent to 250 mg or 500 mg of cephalexin. The capsules also contain the following inactive ingredients: microcrystalline cellulose, croscarmellose sodium, D&C Yellow No. 10, FD&C Blue No. 1, FD&C Yellow No. 6, gelatin, magnesium stearate, titanium dioxide, and sodium lauryl sulfate."
},
{
"NDCCode": "80425-0004-5",
"PackageDescription": "14 CAPSULE in 1 BOTTLE (80425-0004-5) ",
"NDC11Code": "80425-0004-05",
"ProductNDC": "80425-0004",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cephalexin",
"NonProprietaryName": "Cephalexin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20220914",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065253",
"LabelerName": "ADVANCED RX PHARMACY OF TENNESSEE, LLC",
"SubstanceName": "CEPHALEXIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2024-03-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240118",
"SamplePackage": "N",
"IndicationAndUsage": "1.1 Respiratory Tract Infections. Cephalexin capsules are indicated for the treatment of respiratory tract infections caused by susceptible isolates of Streptococcus pneumoniae and Streptococcus pyogenes. 1.2 Otitis Media. Cephalexin capsules are indicated for the treatment of otitis media caused by susceptible isolates of Streptococcus pneumoniae, Haemophilus influenzae, Staphylococcus aureus, Streptococcus pyogenes, and Moraxella catarrhalis. 1.3 Skin and Skin Structure Infections. Cephalexin capsules are indicated for the treatment of skin and skin structure infections caused by susceptible isolates of the following Gram-positive bacteria: Staphylococcus aureus and Streptococcus pyogenes. 1.4 Bone Infections. Cephalexin capsules are indicated for the treatment of bone infections caused by susceptible isolates of Staphylococcus aureus and Proteus mirabilis. 1.5 Genitourinary Tract Infections. Cephalexin capsules are indicated for the treatment of genitourinary tract infections, including acute prostatitis, caused by susceptible isolates of Escherichia coli, Proteus mirabilis, and Klebsiella pneumoniae. 1.6 Usage. To reduce the development of drug-resistant bacteria and maintain the effectiveness of cephalexin capsules and other antibacterial drugs, cephalexin capsules should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information is available, this information should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Cephalexin capsules, USP is a semisynthetic cephalosporin antibacterial drug intended for oral administration. It is 7-(D-α-Amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid monohydrate. Cephalexin has the molecular formula C16H17N3O4SH2O and the molecular weight is 365.41. Cephalexin has the following structural formula. Each capsule contains cephalexin monohydrate equivalent to 250 mg or 500 mg of cephalexin. The capsules also contain the following inactive ingredients: microcrystalline cellulose, croscarmellose sodium, D&C Yellow No. 10, FD&C Blue No. 1, FD&C Yellow No. 6, gelatin, magnesium stearate, titanium dioxide, and sodium lauryl sulfate."
},
{
"NDCCode": "80425-0033-5",
"PackageDescription": "120 CAPSULE in 1 BOTTLE (80425-0033-5) ",
"NDC11Code": "80425-0033-05",
"ProductNDC": "80425-0033",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gabapentin",
"NonProprietaryName": "Gabapentin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20110129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090858",
"LabelerName": "Advanced Rx of Tennessee, LLC",
"SubstanceName": "GABAPENTIN",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2026-03-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250218",
"SamplePackage": "N",
"IndicationAndUsage": "1 INDICATIONS & USAGE. Gabapentin is indicated for. Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy.",
"Description": "The active ingredient in gabapentin capsules is gabapentin, which has the chemical name 1-(aminomethyl) cyclohexaneacetic acid. The molecular formula of gabapentin is C9H17NO2 and the molecular weight is 171.24. The structural formula of gabapentin is. Gabapentin is a white to off-white crystalline solid with a pKa1 of 3.7 and a pKa2 of 10.7. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.25. Each gabapentin capsule contains 100 mg, 300 mg, or 400 mg of gabapentin and the following inactive ingredients: anhydrous lactose, cornstarch, and talc. The 100 mg capsule shell contains gelatin, sodium lauryl sulfate, and titanium dioxide. The 300 mg capsule shell contains gelatin, sodium lauryl sulfate, titanium dioxide, and yellow iron oxide. The 400 mg capsule shell contains gelatin, sodium lauryl sulfate, red iron oxide, titanium dioxide, and yellow iron oxide. The imprinting ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propyl glycol, strong ammonia solution, and titanium dioxide."
},
{
"NDCCode": "80425-0046-5",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (80425-0046-5) ",
"NDC11Code": "80425-0046-05",
"ProductNDC": "80425-0046",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ibuprofen",
"NonProprietaryName": "Ibuprofen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20151221",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091625",
"LabelerName": "Advanced Rx of Tennessee, LLC",
"SubstanceName": "IBUPROFEN",
"StrengthNumber": "800",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2025-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20151221",
"SamplePackage": "N",
"IndicationAndUsage": "INDICATIONS AND USAGE. Carefully consider the potential benefits and risks of ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of ibuprofen tablets in children have not been conducted.",
"Description": "Ibuprofen tablets contain the active ingredient ibuprofen, which is (±)-2-(p-isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74-77° C and is very slightly soluble in water (<1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula is represented below. Ibuprofen, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose 2910, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, polyethylene glycol 400, pregelatinized starch, povidone k-90, sodium lauryl sulphate, titanium dioxide."
},
{
"NDCCode": "80425-0047-5",
"PackageDescription": "100 TABLET in 1 BOTTLE (80425-0047-5) ",
"NDC11Code": "80425-0047-05",
"ProductNDC": "80425-0047",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ibuprofen",
"NonProprietaryName": "Ibuprofen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091123",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078558",
"LabelerName": "Advanced Rx of Tennessee, LLC",
"SubstanceName": "IBUPROFEN",
"StrengthNumber": "800",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20091123",
"SamplePackage": "N",
"IndicationAndUsage": "INDICATIONS AND USAGE. Carefully consider the potential benefits and risks of Ibuprofen Tablets and other treatment options before deciding to use Ibuprofen Tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals [see WARNINGS]. Ibuprofen Tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen Tablets are indicated for relief of mild to moderate pain. Ibuprofen Tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of Ibuprofen Tablets in children have not been conducted.",
"Description": "Ibuprofen Tablets, USP contain the active ingredient ibuprofen, which is (±)-2-(p-isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74° to 77°C and is very slightly soluble in water (<1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula is represented below. Ibuprofen Tablets, USP, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, pregelatinized starch, talc, stearic acid, and titanium dioxide."
},
{
"NDCCode": "80425-0057-5",
"PackageDescription": "120 TABLET, COATED in 1 BOTTLE (80425-0057-5) ",
"NDC11Code": "80425-0057-05",
"ProductNDC": "80425-0057",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tramadol Hcl",
"NonProprietaryName": "Tramadol Hcl",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20101115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076003",
"LabelerName": "Advanced Rx of Tennessee, LLC",
"SubstanceName": "TRAMADOL HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20101115",
"SamplePackage": "N",
"IndicationAndUsage": "Tramadol hydrochloride tablets are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see WARNINGS AND PRECAUTIONS (5.1)], reserve tramadol hydrochloride tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]: 1 Have not been tolerated or are not expected to be tolerated., 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.",
"Description": "Tramadol hydrochloride tablets, USP, for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride is (±)cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. The structural formula is. The molecular weight of tramadol hydrochloride is 299.8. Tramadol hydrochloride, USP is a white, bitter, crystalline and odorless powder. It is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride tablets, USP contain 50 mg of tramadol hydrochloride, USP and are white in color. Inactive ingredients in the tablet are hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, pregelatinized starch, sodium starch glycolate, and titanium dioxide."
},
{
"NDCCode": "80425-0072-5",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE (80425-0072-5) ",
"NDC11Code": "80425-0072-05",
"ProductNDC": "80425-0072",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ondansetron Hcl",
"NonProprietaryName": "Ondansetron Hcl",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078539",
"LabelerName": "Advanced Rx of Tennessee, LLC",
"SubstanceName": "ONDANSETRON HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20070731",
"SamplePackage": "N",
"IndicationAndUsage": "1 INDICATIONS AND USAGE. Ondansetron tablets are indicated for the prevention of nausea and vomiting associated with. highly emetogenic cancer chemotherapy, including cisplatin greater than or equal to 50 mg/m2 initial and repeat courses of moderately emetogenic cancer chemotherapy radiotherapy in patients receiving either total body irradiation, single high-dose fraction to the abdomen, or daily fractions to the abdomen. Ondansetron tablets are also indicated for the prevention of postoperative nausea and/or vomiting.",
"Description": "The active ingredient in ondansetron tablets, USP is ondansetron hydrochloride as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula:. The molecular formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.9 g/mol. Ondansetron hydrochloride USP (dihydrate) is a white to off-white powder that is soluble in water and normal saline. Ondansetron tablets, USP for oral administration contain ondansetron hydrochloride USP (dihydrate) equivalent to 4 mg or 8 mg or 24 mg of ondansetron. Each film-coated tablet also contains the inactive ingredients anhydrous lactose, microcrystalline cellulose, pregelatinized starch (maize), magnesium stearate, triacetin, titanium dioxide and hypromellose. In addition 8 mg tablet also contains iron oxide yellow and 24 mg tablet also contains iron oxide red. Meets USP dissolution test 6."
},
{
"NDCCode": "80425-0074-5",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (80425-0074-5) ",
"NDC11Code": "80425-0074-05",
"ProductNDC": "80425-0074",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ondansetron Hcl",
"NonProprietaryName": "Ondansetron Hcl",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200916",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078539",
"LabelerName": "Advanced Rx of Tennessee, LLC",
"SubstanceName": "ONDANSETRON HYDROCHLORIDE",
"StrengthNumber": "8",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200916",
"SamplePackage": "N",
"IndicationAndUsage": "1 INDICATIONS AND USAGE. Ondansetron tablets are indicated for the prevention of nausea and vomiting associated with. highly emetogenic cancer chemotherapy, including cisplatin greater than or equal to 50 mg/m2 initial and repeat courses of moderately emetogenic cancer chemotherapy radiotherapy in patients receiving either total body irradiation, single high-dose fraction to the abdomen, or daily fractions to the abdomen. Ondansetron tablets are also indicated for the prevention of postoperative nausea and/or vomiting.",
"Description": "The active ingredient in ondansetron tablets, USP is ondansetron hydrochloride as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula. The molecular formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.9 g/mol. Ondansetron hydrochloride USP (dihydrate) is a white to off-white powder that is soluble in water and normal saline. Ondansetron tablets, USP for oral administration contain ondansetron hydrochloride USP (dihydrate) equivalent to 4 mg or 8 mg of ondansetron. Each film-coated tablet also contains the inactive ingredients anhydrous lactose, microcrystalline cellulose, pregelatinized starch (maize), magnesium stearate, triacetin, titanium dioxide and hypromellose. In addition 8 mg tablet also contains iron oxide yellow. Meets USP dissolution test 6."
},
{
"NDCCode": "80425-0075-5",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (80425-0075-5) ",
"NDC11Code": "80425-0075-05",
"ProductNDC": "80425-0075",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ondansetron Hcl",
"NonProprietaryName": "Ondansetron Hcl",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078539",
"LabelerName": "Advanced Rx of Tennessee, LLC",
"SubstanceName": "ONDANSETRON HYDROCHLORIDE",
"StrengthNumber": "8",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20070731",
"SamplePackage": "N",
"IndicationAndUsage": "1 INDICATIONS AND USAGE. Ondansetron tablets are indicated for the prevention of nausea and vomiting associated with. highly emetogenic cancer chemotherapy, including cisplatin greater than or equal to 50 mg/m2 initial and repeat courses of moderately emetogenic cancer chemotherapy radiotherapy in patients receiving either total body irradiation, single high-dose fraction to the abdomen, or daily fractions to the abdomen. Ondansetron tablets are also indicated for the prevention of postoperative nausea and/or vomiting.",
"Description": "The active ingredient in ondansetron tablets, USP is ondansetron hydrochloride as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula. The molecular formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.9 g/mol. Ondansetron hydrochloride USP (dihydrate) is a white to off-white powder that is soluble in water and normal saline. Ondansetron tablets, USP for oral administration contain ondansetron hydrochloride USP (dihydrate) equivalent to 4 mg or 8 mg or 24 mg of ondansetron. Each film-coated tablet also contains the inactive ingredients anhydrous lactose, microcrystalline cellulose, pregelatinized starch (maize), magnesium stearate, triacetin, titanium dioxide and hypromellose. In addition 8 mg tablet also contains iron oxide yellow and 24 mg tablet also contains iron oxide red. Meets USP dissolution test 6."
},
{
"NDCCode": "80425-0121-5",
"PackageDescription": "14 CAPSULE in 1 BOTTLE (80425-0121-5) ",
"NDC11Code": "80425-0121-05",
"ProductNDC": "80425-0121",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cephalexin",
"NonProprietaryName": "Cephalexin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20110119",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090836",
"LabelerName": "Advanced Rx Pharmacy of Tennessee, LLC",
"SubstanceName": "CEPHALEXIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2024-01-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20110119",
"SamplePackage": "N",
"IndicationAndUsage": "1 INDICATIONS & USAGE. 1.1 Respiratory Tract Infections. Cephalexin is indicated for the treatment of respiratory tract infections caused by susceptible isolates of Streptococcus pneumoniae and Streptococcus pyogenes. 1.2 Otitis Media. Cephalexin is indicated for the treatment of otitis media caused by susceptible isolates of Streptococcus pneumoniae, Haemophilus influenzae, Staphylococcus aureus, Streptococcus pyogenes, and Moraxella catarrhalis. 1.3 Skin and Skin Structure Infections. Cephalexin is indicated for the treatment of skin and skin structure infections caused by susceptible isolates of the following Gram-positive bacteria: Staphylococcus aureus and Streptococcus pyogenes. 1.4 Bone Infections. Cephalexin is indicated for the treatment of bone infections caused by susceptible isolates of Staphylococcus aureus and Proteus mirabilis. 1.5 Genitourinary Tract Infections. Cephalexin is indicated for the treatment of genitourinary tract infections, including acute prostatitis, caused by susceptible isolates of Escherichia coli, Proteus mirabilis, and Klebsiella pneumoniae. 1.6 Usage. To reduce the development of drug-resistant bacteria and maintain the effectiveness of cephalexin and other antibacterial drugs, Cephalexin should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information is available, this information should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Cephalexin capsules, USP is a semisynthetic cephalosporin antibacterial drug intended for oral administration. It is 7-(D-α-Amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid monohydrate. Cephalexin has the molecular formula C 16 H 17 N3O4SH2O and the molecular weight is 365.41. Cephalexin has the following structural formula:. Each capsule contains cephalexin monohydrate equivalent to 250 mg, 333 mg, 500 mg, or 750 mg of cephalexin. The 250 mg, 333 mg, 500 mg and 750 mg capsules contain anhydrous lactose, colloidal silicon dioxide, magnesium stearate, FD & C Blue No. 1, D & C Yellow No. 10, gelatin, sodium lauryl sulphate, titanium dioxide. In addition, the 250 mg capsule contains FD & C Red No. 40; 333 mg and 750 mg Capsules contains FD & C Yellow No. 6. The imprinting ink contains; shellac, propylene glycol, strong ammonia solution and potassium hydroxide. Also black Iron oxide is used in 250mg, 333mg and 500mg and titanium dioxide is used in 750mg."
},
{
"NDCCode": "80425-0121-6",
"PackageDescription": "5 CAPSULE in 1 BOTTLE (80425-0121-6) ",
"NDC11Code": "80425-0121-06",
"ProductNDC": "80425-0121",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cephalexin",
"NonProprietaryName": "Cephalexin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20110119",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090836",
"LabelerName": "Advanced Rx Pharmacy of Tennessee, LLC",
"SubstanceName": "CEPHALEXIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2024-01-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230915",
"SamplePackage": "N",
"IndicationAndUsage": "1 INDICATIONS & USAGE. 1.1 Respiratory Tract Infections. Cephalexin is indicated for the treatment of respiratory tract infections caused by susceptible isolates of Streptococcus pneumoniae and Streptococcus pyogenes. 1.2 Otitis Media. Cephalexin is indicated for the treatment of otitis media caused by susceptible isolates of Streptococcus pneumoniae, Haemophilus influenzae, Staphylococcus aureus, Streptococcus pyogenes, and Moraxella catarrhalis. 1.3 Skin and Skin Structure Infections. Cephalexin is indicated for the treatment of skin and skin structure infections caused by susceptible isolates of the following Gram-positive bacteria: Staphylococcus aureus and Streptococcus pyogenes. 1.4 Bone Infections. Cephalexin is indicated for the treatment of bone infections caused by susceptible isolates of Staphylococcus aureus and Proteus mirabilis. 1.5 Genitourinary Tract Infections. Cephalexin is indicated for the treatment of genitourinary tract infections, including acute prostatitis, caused by susceptible isolates of Escherichia coli, Proteus mirabilis, and Klebsiella pneumoniae. 1.6 Usage. To reduce the development of drug-resistant bacteria and maintain the effectiveness of cephalexin and other antibacterial drugs, Cephalexin should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information is available, this information should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Cephalexin capsules, USP is a semisynthetic cephalosporin antibacterial drug intended for oral administration. It is 7-(D-α-Amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid monohydrate. Cephalexin has the molecular formula C 16 H 17 N3O4SH2O and the molecular weight is 365.41. Cephalexin has the following structural formula:. Each capsule contains cephalexin monohydrate equivalent to 250 mg, 333 mg, 500 mg, or 750 mg of cephalexin. The 250 mg, 333 mg, 500 mg and 750 mg capsules contain anhydrous lactose, colloidal silicon dioxide, magnesium stearate, FD & C Blue No. 1, D & C Yellow No. 10, gelatin, sodium lauryl sulphate, titanium dioxide. In addition, the 250 mg capsule contains FD & C Red No. 40; 333 mg and 750 mg Capsules contains FD & C Yellow No. 6. The imprinting ink contains; shellac, propylene glycol, strong ammonia solution and potassium hydroxide. Also black Iron oxide is used in 250mg, 333mg and 500mg and titanium dioxide is used in 750mg."
},
{
"NDCCode": "80425-0159-5",
"PackageDescription": "120 TABLET in 1 BOTTLE (80425-0159-5) ",
"NDC11Code": "80425-0159-05",
"ProductNDC": "80425-0159",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tramadol Hcl",
"NonProprietaryName": "Tramadol Hcl",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20020622",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075964",
"LabelerName": "Advanced Rx Pharmacy of Tennessee, LLC",
"SubstanceName": "TRAMADOL HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2026-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20020622",
"SamplePackage": "N",
"IndicationAndUsage": "INDICATIONS AND USAGE. Tramadol hydrochloride tablets are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see WARNINGS AND PRECAUTIONS (5.1)], reserve tramadol hydrochloride tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]. Have not been tolerated or are not expected to be tolerated. Have not provided adequate analgesia or are not expected to provide adequate analgesia.",
"Description": "Tramadol hydrochloride tablets, USP, for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride is (±)cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. The structural formula is. The molecular weight of tramadol hydrochloride is 299.8. Tramadol hydrochloride, USP is a white, bitter, crystalline and odorless powder. It is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride tablets, USP contain 50 mg of tramadol hydrochloride, USP, and are white in color. Inactive ingredients in the tablet are pregelatinized starch, lactose anhydrous, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, titanium dioxide, hypromellose and polysorbate 80."
},
{
"NDCCode": "80425-0209-5",
"PackageDescription": "6 CAPSULE in 1 BOTTLE (80425-0209-5) ",
"NDC11Code": "80425-0209-05",
"ProductNDC": "80425-0209",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Celecoxib",
"NonProprietaryName": "Celecoxib",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20201221",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210071",
"LabelerName": "Advanced Rx Pharmacy of Tennessee, LLC",
"SubstanceName": "CELECOXIB",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260319",
"SamplePackage": "N",
"IndicationAndUsage": "Celecoxib is indicated. 1.1 Osteoarthritis (OA). For the management of the signs and symptoms of OA [see CLINICAL STUDIES (14.1)]. 1.2 Rheumatoid Arthritis (RA). For the management of the signs and symptoms of RA [see CLINICAL STUDIES (14.2)]. 1.3 Juvenile Rheumatoid Arthritis (JRA). For the management of the signs and symptoms of JRA in patients 2 years and older [see CLINICAL STUDIES (14.3)]. 1.4 Ankylosing Spondylitis (AS). For the management of the signs and symptoms of AS [see CLINICAL STUDIES (14.4)]. 1.5 Acute Pain. For the management of acute pain in adults [see CLINICAL STUDIES (14.5)]. 1.6 Primary Dysmenorrhea. For the management of primary dysmenorrhea [see CLINICAL STUDIES (14.5)].",
"Description": "Celecoxib capsule is a nonsteroidal anti-inflammatory drug, available as capsules containing 50 mg, 100 mg and 200 mg celecoxib for oral administration. The chemical name is 4-[5-(4-methylphenyl)-3-(trifluoromethyl)-1H-pyrazol-1-yl] benzenesulfonamide and is a diaryl-substituted pyrazole. The molecular weight is 381.38. Its molecular formula is C17H14F3N3O2S, and it has the following chemical structure. Celecoxib is a white to off-white powder with a pKa of 11.1 (sulfonamide moiety). Celecoxib is hydrophobic (log P is 3.5) and is practically insoluble in aqueous media at physiological pH range. The inactive ingredients in celecoxib capsules include: croscarmellose sodium, lactose monohydrate, magnesium stearate, povidone and sodium lauryl sulfate. The capsule shell contains gelatin and titanium dioxide. The imprinting ink contains the following: black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, shellac and strong ammonia solution."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>80425-0155-5</NDCCode>
<PackageDescription>180 TABLET, FILM COATED in 1 BOTTLE (80425-0155-5) </PackageDescription>
<NDC11Code>80425-0155-05</NDC11Code>
<ProductNDC>80425-0155</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hcl</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hcl</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200706</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213324</ApplicationNumber>
<LabelerName>Advanced Rx Pharmacy of Tennessee, LLC</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230330</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>INDICATIONS AND USAGE. Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white to off-white, odorless, crystalline powder with the molecular formula C20H21NHCl and a molecular weight of 311.85. It has a melting point between 215°C to 219°C and a pKa of 8.47. It is freely soluble in water, in alcohol, and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride, insoluble in n-Hexane. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H-Dibenzo[a,d] cyclohepten-5 ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Cyclobenzaprine hydrochloride USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 7.5 mg is supplied as a 7.5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets, USP 5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide and triacetin. Cyclobenzaprine hydrochloride tablets, USP 7.5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. Cyclobenzaprine hydrochloride tablets, USP 10 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, FD&C Blue No. 2 Aluminium Lake, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>80425-0155-1</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (80425-0155-1) </PackageDescription>
<NDC11Code>80425-0155-01</NDC11Code>
<ProductNDC>80425-0155</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hcl</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hcl</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200706</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213324</ApplicationNumber>
<LabelerName>Advanced Rx Pharmacy of Tennessee, LLC</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230330</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>INDICATIONS AND USAGE. Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white to off-white, odorless, crystalline powder with the molecular formula C20H21NHCl and a molecular weight of 311.85. It has a melting point between 215°C to 219°C and a pKa of 8.47. It is freely soluble in water, in alcohol, and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride, insoluble in n-Hexane. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H-Dibenzo[a,d] cyclohepten-5 ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Cyclobenzaprine hydrochloride USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 7.5 mg is supplied as a 7.5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets, USP 5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide and triacetin. Cyclobenzaprine hydrochloride tablets, USP 7.5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. Cyclobenzaprine hydrochloride tablets, USP 10 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, FD&C Blue No. 2 Aluminium Lake, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>80425-0155-2</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (80425-0155-2) </PackageDescription>
<NDC11Code>80425-0155-02</NDC11Code>
<ProductNDC>80425-0155</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hcl</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hcl</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200706</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213324</ApplicationNumber>
<LabelerName>Advanced Rx Pharmacy of Tennessee, LLC</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230330</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>INDICATIONS AND USAGE. Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white to off-white, odorless, crystalline powder with the molecular formula C20H21NHCl and a molecular weight of 311.85. It has a melting point between 215°C to 219°C and a pKa of 8.47. It is freely soluble in water, in alcohol, and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride, insoluble in n-Hexane. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H-Dibenzo[a,d] cyclohepten-5 ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Cyclobenzaprine hydrochloride USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 7.5 mg is supplied as a 7.5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets, USP 5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide and triacetin. Cyclobenzaprine hydrochloride tablets, USP 7.5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. Cyclobenzaprine hydrochloride tablets, USP 10 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, FD&C Blue No. 2 Aluminium Lake, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>80425-0155-3</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (80425-0155-3) </PackageDescription>
<NDC11Code>80425-0155-03</NDC11Code>
<ProductNDC>80425-0155</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hcl</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hcl</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200706</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213324</ApplicationNumber>
<LabelerName>Advanced Rx Pharmacy of Tennessee, LLC</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230330</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>INDICATIONS AND USAGE. Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white to off-white, odorless, crystalline powder with the molecular formula C20H21NHCl and a molecular weight of 311.85. It has a melting point between 215°C to 219°C and a pKa of 8.47. It is freely soluble in water, in alcohol, and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride, insoluble in n-Hexane. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H-Dibenzo[a,d] cyclohepten-5 ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Cyclobenzaprine hydrochloride USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 7.5 mg is supplied as a 7.5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets, USP 5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide and triacetin. Cyclobenzaprine hydrochloride tablets, USP 7.5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. Cyclobenzaprine hydrochloride tablets, USP 10 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, FD&C Blue No. 2 Aluminium Lake, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>80425-0155-4</NDCCode>
<PackageDescription>120 TABLET, FILM COATED in 1 BOTTLE (80425-0155-4) </PackageDescription>
<NDC11Code>80425-0155-04</NDC11Code>
<ProductNDC>80425-0155</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hcl</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hcl</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200706</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213324</ApplicationNumber>
<LabelerName>Advanced Rx Pharmacy of Tennessee, LLC</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230330</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>INDICATIONS AND USAGE. Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white to off-white, odorless, crystalline powder with the molecular formula C20H21NHCl and a molecular weight of 311.85. It has a melting point between 215°C to 219°C and a pKa of 8.47. It is freely soluble in water, in alcohol, and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride, insoluble in n-Hexane. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H-Dibenzo[a,d] cyclohepten-5 ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Cyclobenzaprine hydrochloride USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 7.5 mg is supplied as a 7.5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets, USP 5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide and triacetin. Cyclobenzaprine hydrochloride tablets, USP 7.5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. Cyclobenzaprine hydrochloride tablets, USP 10 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, FD&C Blue No. 2 Aluminium Lake, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>15631-0155-5</NDCCode>
<PackageDescription>12500 PELLET in 1 PACKAGE (15631-0155-5) </PackageDescription>
<NDC11Code>15631-0155-05</NDC11Code>
<ProductNDC>15631-0155</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Convallaria Majalis</ProprietaryName>
<NonProprietaryName>Convallaria Majalis</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151002</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
<SubstanceName>CONVALLARIA MAJALIS</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>[hp_X]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>17856-0155-1</NDCCode>
<PackageDescription>72 CUP, UNIT-DOSE in 1 BOX, UNIT-DOSE (17856-0155-1) / 5 mL in 1 CUP, UNIT-DOSE</PackageDescription>
<NDC11Code>17856-0155-01</NDC11Code>
<ProductNDC>17856-0155</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Promethazine Hydrochloride And Dextromethorphan Hydrobromide Oral Solution</ProprietaryName>
<NonProprietaryName>Promethazine Hydrochloride And Dextromethorphan Hydrobromide Oral Solution</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201005</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040649</ApplicationNumber>
<LabelerName>ATLANTIC BIOLOGICALS CORP.</LabelerName>
<SubstanceName>DEXTROMETHORPHAN HYDROBROMIDE; PROMETHAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>15; 6.25</StrengthNumber>
<StrengthUnit>mg/5mL; mg/5mL</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC], Phenothiazines [CS], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230913</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Promethazine hydrochloride and dextromethorphan hydrobromide oral solution is indicated for the temporary relief of coughs and upper respiratory symptoms associated with allergy or the common cold.</IndicationAndUsage>
<Description>Each 5 mL (one teaspoonful), for oral administration contains: Dextromethorphan hydrobromide 15 mg; promethazine hydrochloride 6.25 mg. Alcohol 7%. Inactive Ingredients: Ascorbic acid, citric acid, D&C yellow #10, FD&C yellow #6, menthol, methylparaben, orange pineapple flavor, propylene glycol, propylparaben, purified water, saccharin sodium, sodium benzoate, sodium citrate and sucrose. Dextromethorphan hydrobromide is a salt of the methyl ether of the dextrorotatory isomer of levorphanol, a narcotic analgesic. It is chemically designated as 3-methoxy-17-methyl-9α, 13α, 14α-morphinan hydrobromide monohydrate. Dextromethorphan hydrobromide occurs as white crystals sparingly soluble in water and freely soluble in alcohol. It has a molecular weight of 370.32, a molecular formula of C 18H 25NOHBrH 2O, and the following structural formula:. Promethazine is a racemic compound. Promethazine hydrochloride, a phenothiazine derivative, is chemically designated as 10 H-Phenothiazine-10-ethanamine, N, N, α-trimethyl-monohydrochloride. Promethazine hydrochloride occurs as a white to faint yellow, practically odorless, crystalline powder which slowly oxidizes and turns blue on prolonged exposure to air. It is soluble in water and freely soluble in alcohol. It has a molecular weight of 320.88, a molecular formula of C 17H 20N 2SHCI, and the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>38779-0155-5</NDCCode>
<PackageDescription>100 g in 1 JAR (38779-0155-5) </PackageDescription>
<NDC11Code>38779-0155-05</NDC11Code>
<ProductNDC>38779-0155</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Prilocaine Hydrochloride</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20140612</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Medisca Inc.</LabelerName>
<SubstanceName>PRILOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-11-14</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>12-JUN-14</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>49288-0155-2</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (49288-0155-2)</PackageDescription>
<NDC11Code>49288-0155-02</NDC11Code>
<ProductNDC>49288-0155</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cumin</ProprietaryName>
<NonProprietaryName>Cumin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>CUMIN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Plant Allergenic Extract [EPC],Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Plant Proteins [CS],Food Additives [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0155-5</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49288-0155-5)</PackageDescription>
<NDC11Code>49288-0155-05</NDC11Code>
<ProductNDC>49288-0155</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cumin</ProprietaryName>
<NonProprietaryName>Cumin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>CUMIN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Plant Allergenic Extract [EPC],Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Plant Proteins [CS],Food Additives [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>50090-0155-5</NDCCode>
<PackageDescription>15 TABLET, FILM COATED in 1 BOTTLE (50090-0155-5) </PackageDescription>
<NDC11Code>50090-0155-05</NDC11Code>
<ProductNDC>50090-0155</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sudogest</ProprietaryName>
<NonProprietaryName>Pseudoephedrine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19841207</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>PSEUDOEPHEDRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141128</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves nasal congestion due to the common cold, hay fever or other upper respiratory allergies. temporarily relieves sinus congestion and pressure .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>55154-0155-5</NDCCode>
<PackageDescription>6 PACKET in 1 BAG (55154-0155-5) > .9 g in 1 PACKET</PackageDescription>
<NDC11Code>55154-0155-05</NDC11Code>
<ProductNDC>55154-0155</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Bacitracin Zinc</ProprietaryName>
<NonProprietaryName>Bacitracin Zinc</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20110602</StartMarketingDate>
<EndMarketingDate>20180131</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part333B</ApplicationNumber>
<LabelerName>Cardinal Health</LabelerName>
<SubstanceName>BACITRACIN ZINC</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>[USP'U]/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-02-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110602</StartMarketingDatePackage>
<EndMarketingDatePackage>20180131</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68554-0155-1</NDCCode>
<PackageDescription>5 kg in 1 DRUM (68554-0155-1) </PackageDescription>
<NDC11Code>68554-0155-01</NDC11Code>
<ProductNDC>68554-0155</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Elagolix Sodium</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20180723</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>HETERO LABS LIMITED</LabelerName>
<SubstanceName>ELAGOLIX SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2023-11-27</LastUpdate>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>23-JUL-18</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>71335-0155-5</NDCCode>
<PackageDescription>120 CAPSULE in 1 BOTTLE (71335-0155-5) </PackageDescription>
<NDC11Code>71335-0155-05</NDC11Code>
<ProductNDC>71335-0155</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nortriptyline Hydrochloride</ProprietaryName>
<NonProprietaryName>Nortriptyline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20000508</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075520</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>NORTRIPTYLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nortriptyline hydrochloride is indicated for the relief of symptoms of depression. Endogenous depressions are more likely to be alleviated than are other depressive states.</IndicationAndUsage>
<Description>Nortriptyline Hydrochloride, USP is 1-propanamine, 3-(10,11-dihydro-5H-dibenzo[a,d]cyclohepten-5-ylidene)-N-methyl, hydrochloride. The structural formula is as follows. C19H21N∙HCl MW = 299.84. C19H21N∙HCl MW = 299.84. Each capsule, for oral administration, contains nortriptyline hydrochloride equivalent to 10 mg, 25 mg, 50 mg, and 75 mg of nortriptyline hydrochloride USP. In addition, each capsule contains the following inactive ingredients: black iron oxide, colloidal silicon dioxide, D&C Yellow #10 (aluminum lake), D&C Yellow #10, FD&C Blue #1 (aluminum lake), FD&C Blue #2 (aluminum lake), FD&C Green #3 (10, 50 and 75 mg only), FD&C Red #40 (aluminum lake), gelatin, I.M.S. 74 OP, magnesium stearate, pregelatinized corn starch, shellac, sodium lauryl sulfate and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>71858-0155-1</NDCCode>
<PackageDescription>2 POUCH in 1 CARTON (71858-0155-1) / 5 AMPULE in 1 POUCH (71858-0155-4) / 1 mL in 1 AMPULE (71858-0155-6) </PackageDescription>
<NDC11Code>71858-0155-01</NDC11Code>
<ProductNDC>71858-0155</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tirosint</ProprietaryName>
<ProprietaryNameSuffix>Sol</ProprietaryNameSuffix>
<NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190301</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA206977</ApplicationNumber>
<LabelerName>IBSA Pharma Inc.</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
<StrengthNumber>175</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190301</StartMarketingDatePackage>
<EndMarketingDatePackage>20260131</EndMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>TIROSINT-SOL is L-thyroxine (T4) indicated in adult and pediatric patients, including neonates, for: 1 Hypothyroidism - As replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism ( 1) , 2 Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression - As an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer ( 1) .</IndicationAndUsage>
<Description>TIROSINT-SOL (levothyroxine sodium) oral solution contains synthetic L-3,3',5,5'-tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15H 10I 4NNaO 4 ∙ x H 2O (where x = 5), molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown:. TIROSINT-SOL oral solution is a clear, colorless to slightly yellow solution supplied in a 1 mL white, non-transparent, unit-dose ampule and is available in the following strengths (mcg/mL): 13, 25, 37.5, 44, 50, 62.5, 75, 88, 100, 112, 125, 137, 150, 175, 200. The inactive ingredients in TIROSINT-SOL are glycerol and water.</Description>
</NDC>
<NDC>
<NDCCode>71858-0155-2</NDCCode>
<PackageDescription>6 POUCH in 1 CARTON (71858-0155-2) / 5 AMPULE in 1 POUCH (71858-0155-4) / 1 mL in 1 AMPULE (71858-0155-6) </PackageDescription>
<NDC11Code>71858-0155-02</NDC11Code>
<ProductNDC>71858-0155</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tirosint</ProprietaryName>
<ProprietaryNameSuffix>Sol</ProprietaryNameSuffix>
<NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190301</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA206977</ApplicationNumber>
<LabelerName>IBSA Pharma Inc.</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
<StrengthNumber>175</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250725</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>TIROSINT-SOL is L-thyroxine (T4) indicated in adult and pediatric patients, including neonates, for: 1 Hypothyroidism - As replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism ( 1) , 2 Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression - As an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer ( 1) .</IndicationAndUsage>
<Description>TIROSINT-SOL (levothyroxine sodium) oral solution contains synthetic L-3,3',5,5'-tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15H 10I 4NNaO 4 ∙ x H 2O (where x = 5), molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown:. TIROSINT-SOL oral solution is a clear, colorless to slightly yellow solution supplied in a 1 mL white, non-transparent, unit-dose ampule and is available in the following strengths (mcg/mL): 13, 25, 37.5, 44, 50, 62.5, 75, 88, 100, 112, 125, 137, 150, 175, 200. The inactive ingredients in TIROSINT-SOL are glycerol and water.</Description>
</NDC>
<NDC>
<NDCCode>71858-0155-5</NDCCode>
<PackageDescription>6 POUCH in 1 CARTON (71858-0155-5) / 5 AMPULE in 1 POUCH (71858-0155-4) / 1 mL in 1 AMPULE (71858-0155-6) </PackageDescription>
<NDC11Code>71858-0155-05</NDC11Code>
<ProductNDC>71858-0155</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tirosint</ProprietaryName>
<ProprietaryNameSuffix>Sol</ProprietaryNameSuffix>
<NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190301</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA206977</ApplicationNumber>
<LabelerName>IBSA Pharma Inc.</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
<StrengthNumber>175</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TIROSINT-SOL is L-thyroxine (T4) indicated in adult and pediatric patients, including neonates, for: 1 Hypothyroidism - As replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism ( 1) , 2 Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression - As an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer ( 1) .</IndicationAndUsage>
<Description>TIROSINT-SOL (levothyroxine sodium) oral solution contains synthetic L-3,3',5,5'-tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C 15H 10I 4NNaO 4 ∙ x H 2O (where x = 5), molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown:. TIROSINT-SOL oral solution is a clear, colorless to slightly yellow solution supplied in a 1 mL white, non-transparent, unit-dose ampule and is available in the following strengths (mcg/mL): 13, 25, 37.5, 44, 50, 62.5, 75, 88, 100, 112, 125, 137, 150, 175, 200. The inactive ingredients in TIROSINT-SOL are glycerol and water.</Description>
</NDC>
<NDC>
<NDCCode>80425-0004-4</NDCCode>
<PackageDescription>5 CAPSULE in 1 BOTTLE (80425-0004-4) </PackageDescription>
<NDC11Code>80425-0004-04</NDC11Code>
<ProductNDC>80425-0004</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cephalexin</ProprietaryName>
<NonProprietaryName>Cephalexin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220914</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065253</ApplicationNumber>
<LabelerName>ADVANCED RX PHARMACY OF TENNESSEE, LLC</LabelerName>
<SubstanceName>CEPHALEXIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240118</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1.1 Respiratory Tract Infections. Cephalexin capsules are indicated for the treatment of respiratory tract infections caused by susceptible isolates of Streptococcus pneumoniae and Streptococcus pyogenes. 1.2 Otitis Media. Cephalexin capsules are indicated for the treatment of otitis media caused by susceptible isolates of Streptococcus pneumoniae, Haemophilus influenzae, Staphylococcus aureus, Streptococcus pyogenes, and Moraxella catarrhalis. 1.3 Skin and Skin Structure Infections. Cephalexin capsules are indicated for the treatment of skin and skin structure infections caused by susceptible isolates of the following Gram-positive bacteria: Staphylococcus aureus and Streptococcus pyogenes. 1.4 Bone Infections. Cephalexin capsules are indicated for the treatment of bone infections caused by susceptible isolates of Staphylococcus aureus and Proteus mirabilis. 1.5 Genitourinary Tract Infections. Cephalexin capsules are indicated for the treatment of genitourinary tract infections, including acute prostatitis, caused by susceptible isolates of Escherichia coli, Proteus mirabilis, and Klebsiella pneumoniae. 1.6 Usage. To reduce the development of drug-resistant bacteria and maintain the effectiveness of cephalexin capsules and other antibacterial drugs, cephalexin capsules should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information is available, this information should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Cephalexin capsules, USP is a semisynthetic cephalosporin antibacterial drug intended for oral administration. It is 7-(D-α-Amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid monohydrate. Cephalexin has the molecular formula C16H17N3O4SH2O and the molecular weight is 365.41. Cephalexin has the following structural formula. Each capsule contains cephalexin monohydrate equivalent to 250 mg or 500 mg of cephalexin. The capsules also contain the following inactive ingredients: microcrystalline cellulose, croscarmellose sodium, D&C Yellow No. 10, FD&C Blue No. 1, FD&C Yellow No. 6, gelatin, magnesium stearate, titanium dioxide, and sodium lauryl sulfate.</Description>
</NDC>
<NDC>
<NDCCode>80425-0004-5</NDCCode>
<PackageDescription>14 CAPSULE in 1 BOTTLE (80425-0004-5) </PackageDescription>
<NDC11Code>80425-0004-05</NDC11Code>
<ProductNDC>80425-0004</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cephalexin</ProprietaryName>
<NonProprietaryName>Cephalexin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220914</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065253</ApplicationNumber>
<LabelerName>ADVANCED RX PHARMACY OF TENNESSEE, LLC</LabelerName>
<SubstanceName>CEPHALEXIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240118</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1.1 Respiratory Tract Infections. Cephalexin capsules are indicated for the treatment of respiratory tract infections caused by susceptible isolates of Streptococcus pneumoniae and Streptococcus pyogenes. 1.2 Otitis Media. Cephalexin capsules are indicated for the treatment of otitis media caused by susceptible isolates of Streptococcus pneumoniae, Haemophilus influenzae, Staphylococcus aureus, Streptococcus pyogenes, and Moraxella catarrhalis. 1.3 Skin and Skin Structure Infections. Cephalexin capsules are indicated for the treatment of skin and skin structure infections caused by susceptible isolates of the following Gram-positive bacteria: Staphylococcus aureus and Streptococcus pyogenes. 1.4 Bone Infections. Cephalexin capsules are indicated for the treatment of bone infections caused by susceptible isolates of Staphylococcus aureus and Proteus mirabilis. 1.5 Genitourinary Tract Infections. Cephalexin capsules are indicated for the treatment of genitourinary tract infections, including acute prostatitis, caused by susceptible isolates of Escherichia coli, Proteus mirabilis, and Klebsiella pneumoniae. 1.6 Usage. To reduce the development of drug-resistant bacteria and maintain the effectiveness of cephalexin capsules and other antibacterial drugs, cephalexin capsules should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information is available, this information should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Cephalexin capsules, USP is a semisynthetic cephalosporin antibacterial drug intended for oral administration. It is 7-(D-α-Amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid monohydrate. Cephalexin has the molecular formula C16H17N3O4SH2O and the molecular weight is 365.41. Cephalexin has the following structural formula. Each capsule contains cephalexin monohydrate equivalent to 250 mg or 500 mg of cephalexin. The capsules also contain the following inactive ingredients: microcrystalline cellulose, croscarmellose sodium, D&C Yellow No. 10, FD&C Blue No. 1, FD&C Yellow No. 6, gelatin, magnesium stearate, titanium dioxide, and sodium lauryl sulfate.</Description>
</NDC>
<NDC>
<NDCCode>80425-0033-5</NDCCode>
<PackageDescription>120 CAPSULE in 1 BOTTLE (80425-0033-5) </PackageDescription>
<NDC11Code>80425-0033-05</NDC11Code>
<ProductNDC>80425-0033</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gabapentin</ProprietaryName>
<NonProprietaryName>Gabapentin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090858</ApplicationNumber>
<LabelerName>Advanced Rx of Tennessee, LLC</LabelerName>
<SubstanceName>GABAPENTIN</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1 INDICATIONS & USAGE. Gabapentin is indicated for. Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy.</IndicationAndUsage>
<Description>The active ingredient in gabapentin capsules is gabapentin, which has the chemical name 1-(aminomethyl) cyclohexaneacetic acid. The molecular formula of gabapentin is C9H17NO2 and the molecular weight is 171.24. The structural formula of gabapentin is. Gabapentin is a white to off-white crystalline solid with a pKa1 of 3.7 and a pKa2 of 10.7. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.25. Each gabapentin capsule contains 100 mg, 300 mg, or 400 mg of gabapentin and the following inactive ingredients: anhydrous lactose, cornstarch, and talc. The 100 mg capsule shell contains gelatin, sodium lauryl sulfate, and titanium dioxide. The 300 mg capsule shell contains gelatin, sodium lauryl sulfate, titanium dioxide, and yellow iron oxide. The 400 mg capsule shell contains gelatin, sodium lauryl sulfate, red iron oxide, titanium dioxide, and yellow iron oxide. The imprinting ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propyl glycol, strong ammonia solution, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>80425-0046-5</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (80425-0046-5) </PackageDescription>
<NDC11Code>80425-0046-05</NDC11Code>
<ProductNDC>80425-0046</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ibuprofen</ProprietaryName>
<NonProprietaryName>Ibuprofen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151221</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091625</ApplicationNumber>
<LabelerName>Advanced Rx of Tennessee, LLC</LabelerName>
<SubstanceName>IBUPROFEN</SubstanceName>
<StrengthNumber>800</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151221</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>INDICATIONS AND USAGE. Carefully consider the potential benefits and risks of ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of ibuprofen tablets in children have not been conducted.</IndicationAndUsage>
<Description>Ibuprofen tablets contain the active ingredient ibuprofen, which is (±)-2-(p-isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74-77° C and is very slightly soluble in water (<1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula is represented below. Ibuprofen, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose 2910, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, polyethylene glycol 400, pregelatinized starch, povidone k-90, sodium lauryl sulphate, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>80425-0047-5</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (80425-0047-5) </PackageDescription>
<NDC11Code>80425-0047-05</NDC11Code>
<ProductNDC>80425-0047</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ibuprofen</ProprietaryName>
<NonProprietaryName>Ibuprofen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091123</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078558</ApplicationNumber>
<LabelerName>Advanced Rx of Tennessee, LLC</LabelerName>
<SubstanceName>IBUPROFEN</SubstanceName>
<StrengthNumber>800</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20091123</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>INDICATIONS AND USAGE. Carefully consider the potential benefits and risks of Ibuprofen Tablets and other treatment options before deciding to use Ibuprofen Tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals [see WARNINGS]. Ibuprofen Tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen Tablets are indicated for relief of mild to moderate pain. Ibuprofen Tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of Ibuprofen Tablets in children have not been conducted.</IndicationAndUsage>
<Description>Ibuprofen Tablets, USP contain the active ingredient ibuprofen, which is (±)-2-(p-isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74° to 77°C and is very slightly soluble in water (<1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula is represented below. Ibuprofen Tablets, USP, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, pregelatinized starch, talc, stearic acid, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>80425-0057-5</NDCCode>
<PackageDescription>120 TABLET, COATED in 1 BOTTLE (80425-0057-5) </PackageDescription>
<NDC11Code>80425-0057-05</NDC11Code>
<ProductNDC>80425-0057</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tramadol Hcl</ProprietaryName>
<NonProprietaryName>Tramadol Hcl</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076003</ApplicationNumber>
<LabelerName>Advanced Rx of Tennessee, LLC</LabelerName>
<SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tramadol hydrochloride tablets are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see WARNINGS AND PRECAUTIONS (5.1)], reserve tramadol hydrochloride tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]: 1 Have not been tolerated or are not expected to be tolerated., 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Tramadol hydrochloride tablets, USP, for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride is (±)cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. The structural formula is. The molecular weight of tramadol hydrochloride is 299.8. Tramadol hydrochloride, USP is a white, bitter, crystalline and odorless powder. It is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride tablets, USP contain 50 mg of tramadol hydrochloride, USP and are white in color. Inactive ingredients in the tablet are hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, pregelatinized starch, sodium starch glycolate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>80425-0072-5</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE (80425-0072-5) </PackageDescription>
<NDC11Code>80425-0072-05</NDC11Code>
<ProductNDC>80425-0072</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ondansetron Hcl</ProprietaryName>
<NonProprietaryName>Ondansetron Hcl</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070731</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078539</ApplicationNumber>
<LabelerName>Advanced Rx of Tennessee, LLC</LabelerName>
<SubstanceName>ONDANSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070731</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1 INDICATIONS AND USAGE. Ondansetron tablets are indicated for the prevention of nausea and vomiting associated with. highly emetogenic cancer chemotherapy, including cisplatin greater than or equal to 50 mg/m2 initial and repeat courses of moderately emetogenic cancer chemotherapy radiotherapy in patients receiving either total body irradiation, single high-dose fraction to the abdomen, or daily fractions to the abdomen. Ondansetron tablets are also indicated for the prevention of postoperative nausea and/or vomiting.</IndicationAndUsage>
<Description>The active ingredient in ondansetron tablets, USP is ondansetron hydrochloride as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula:. The molecular formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.9 g/mol. Ondansetron hydrochloride USP (dihydrate) is a white to off-white powder that is soluble in water and normal saline. Ondansetron tablets, USP for oral administration contain ondansetron hydrochloride USP (dihydrate) equivalent to 4 mg or 8 mg or 24 mg of ondansetron. Each film-coated tablet also contains the inactive ingredients anhydrous lactose, microcrystalline cellulose, pregelatinized starch (maize), magnesium stearate, triacetin, titanium dioxide and hypromellose. In addition 8 mg tablet also contains iron oxide yellow and 24 mg tablet also contains iron oxide red. Meets USP dissolution test 6.</Description>
</NDC>
<NDC>
<NDCCode>80425-0074-5</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (80425-0074-5) </PackageDescription>
<NDC11Code>80425-0074-05</NDC11Code>
<ProductNDC>80425-0074</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ondansetron Hcl</ProprietaryName>
<NonProprietaryName>Ondansetron Hcl</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200916</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078539</ApplicationNumber>
<LabelerName>Advanced Rx of Tennessee, LLC</LabelerName>
<SubstanceName>ONDANSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200916</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1 INDICATIONS AND USAGE. Ondansetron tablets are indicated for the prevention of nausea and vomiting associated with. highly emetogenic cancer chemotherapy, including cisplatin greater than or equal to 50 mg/m2 initial and repeat courses of moderately emetogenic cancer chemotherapy radiotherapy in patients receiving either total body irradiation, single high-dose fraction to the abdomen, or daily fractions to the abdomen. Ondansetron tablets are also indicated for the prevention of postoperative nausea and/or vomiting.</IndicationAndUsage>
<Description>The active ingredient in ondansetron tablets, USP is ondansetron hydrochloride as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula. The molecular formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.9 g/mol. Ondansetron hydrochloride USP (dihydrate) is a white to off-white powder that is soluble in water and normal saline. Ondansetron tablets, USP for oral administration contain ondansetron hydrochloride USP (dihydrate) equivalent to 4 mg or 8 mg of ondansetron. Each film-coated tablet also contains the inactive ingredients anhydrous lactose, microcrystalline cellulose, pregelatinized starch (maize), magnesium stearate, triacetin, titanium dioxide and hypromellose. In addition 8 mg tablet also contains iron oxide yellow. Meets USP dissolution test 6.</Description>
</NDC>
<NDC>
<NDCCode>80425-0075-5</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (80425-0075-5) </PackageDescription>
<NDC11Code>80425-0075-05</NDC11Code>
<ProductNDC>80425-0075</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ondansetron Hcl</ProprietaryName>
<NonProprietaryName>Ondansetron Hcl</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070731</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078539</ApplicationNumber>
<LabelerName>Advanced Rx of Tennessee, LLC</LabelerName>
<SubstanceName>ONDANSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070731</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1 INDICATIONS AND USAGE. Ondansetron tablets are indicated for the prevention of nausea and vomiting associated with. highly emetogenic cancer chemotherapy, including cisplatin greater than or equal to 50 mg/m2 initial and repeat courses of moderately emetogenic cancer chemotherapy radiotherapy in patients receiving either total body irradiation, single high-dose fraction to the abdomen, or daily fractions to the abdomen. Ondansetron tablets are also indicated for the prevention of postoperative nausea and/or vomiting.</IndicationAndUsage>
<Description>The active ingredient in ondansetron tablets, USP is ondansetron hydrochloride as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula. The molecular formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.9 g/mol. Ondansetron hydrochloride USP (dihydrate) is a white to off-white powder that is soluble in water and normal saline. Ondansetron tablets, USP for oral administration contain ondansetron hydrochloride USP (dihydrate) equivalent to 4 mg or 8 mg or 24 mg of ondansetron. Each film-coated tablet also contains the inactive ingredients anhydrous lactose, microcrystalline cellulose, pregelatinized starch (maize), magnesium stearate, triacetin, titanium dioxide and hypromellose. In addition 8 mg tablet also contains iron oxide yellow and 24 mg tablet also contains iron oxide red. Meets USP dissolution test 6.</Description>
</NDC>
<NDC>
<NDCCode>80425-0121-5</NDCCode>
<PackageDescription>14 CAPSULE in 1 BOTTLE (80425-0121-5) </PackageDescription>
<NDC11Code>80425-0121-05</NDC11Code>
<ProductNDC>80425-0121</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cephalexin</ProprietaryName>
<NonProprietaryName>Cephalexin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110119</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090836</ApplicationNumber>
<LabelerName>Advanced Rx Pharmacy of Tennessee, LLC</LabelerName>
<SubstanceName>CEPHALEXIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110119</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1 INDICATIONS & USAGE. 1.1 Respiratory Tract Infections. Cephalexin is indicated for the treatment of respiratory tract infections caused by susceptible isolates of Streptococcus pneumoniae and Streptococcus pyogenes. 1.2 Otitis Media. Cephalexin is indicated for the treatment of otitis media caused by susceptible isolates of Streptococcus pneumoniae, Haemophilus influenzae, Staphylococcus aureus, Streptococcus pyogenes, and Moraxella catarrhalis. 1.3 Skin and Skin Structure Infections. Cephalexin is indicated for the treatment of skin and skin structure infections caused by susceptible isolates of the following Gram-positive bacteria: Staphylococcus aureus and Streptococcus pyogenes. 1.4 Bone Infections. Cephalexin is indicated for the treatment of bone infections caused by susceptible isolates of Staphylococcus aureus and Proteus mirabilis. 1.5 Genitourinary Tract Infections. Cephalexin is indicated for the treatment of genitourinary tract infections, including acute prostatitis, caused by susceptible isolates of Escherichia coli, Proteus mirabilis, and Klebsiella pneumoniae. 1.6 Usage. To reduce the development of drug-resistant bacteria and maintain the effectiveness of cephalexin and other antibacterial drugs, Cephalexin should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information is available, this information should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Cephalexin capsules, USP is a semisynthetic cephalosporin antibacterial drug intended for oral administration. It is 7-(D-α-Amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid monohydrate. Cephalexin has the molecular formula C 16 H 17 N3O4SH2O and the molecular weight is 365.41. Cephalexin has the following structural formula:. Each capsule contains cephalexin monohydrate equivalent to 250 mg, 333 mg, 500 mg, or 750 mg of cephalexin. The 250 mg, 333 mg, 500 mg and 750 mg capsules contain anhydrous lactose, colloidal silicon dioxide, magnesium stearate, FD & C Blue No. 1, D & C Yellow No. 10, gelatin, sodium lauryl sulphate, titanium dioxide. In addition, the 250 mg capsule contains FD & C Red No. 40; 333 mg and 750 mg Capsules contains FD & C Yellow No. 6. The imprinting ink contains; shellac, propylene glycol, strong ammonia solution and potassium hydroxide. Also black Iron oxide is used in 250mg, 333mg and 500mg and titanium dioxide is used in 750mg.</Description>
</NDC>
<NDC>
<NDCCode>80425-0121-6</NDCCode>
<PackageDescription>5 CAPSULE in 1 BOTTLE (80425-0121-6) </PackageDescription>
<NDC11Code>80425-0121-06</NDC11Code>
<ProductNDC>80425-0121</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cephalexin</ProprietaryName>
<NonProprietaryName>Cephalexin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110119</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090836</ApplicationNumber>
<LabelerName>Advanced Rx Pharmacy of Tennessee, LLC</LabelerName>
<SubstanceName>CEPHALEXIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1 INDICATIONS & USAGE. 1.1 Respiratory Tract Infections. Cephalexin is indicated for the treatment of respiratory tract infections caused by susceptible isolates of Streptococcus pneumoniae and Streptococcus pyogenes. 1.2 Otitis Media. Cephalexin is indicated for the treatment of otitis media caused by susceptible isolates of Streptococcus pneumoniae, Haemophilus influenzae, Staphylococcus aureus, Streptococcus pyogenes, and Moraxella catarrhalis. 1.3 Skin and Skin Structure Infections. Cephalexin is indicated for the treatment of skin and skin structure infections caused by susceptible isolates of the following Gram-positive bacteria: Staphylococcus aureus and Streptococcus pyogenes. 1.4 Bone Infections. Cephalexin is indicated for the treatment of bone infections caused by susceptible isolates of Staphylococcus aureus and Proteus mirabilis. 1.5 Genitourinary Tract Infections. Cephalexin is indicated for the treatment of genitourinary tract infections, including acute prostatitis, caused by susceptible isolates of Escherichia coli, Proteus mirabilis, and Klebsiella pneumoniae. 1.6 Usage. To reduce the development of drug-resistant bacteria and maintain the effectiveness of cephalexin and other antibacterial drugs, Cephalexin should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information is available, this information should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Cephalexin capsules, USP is a semisynthetic cephalosporin antibacterial drug intended for oral administration. It is 7-(D-α-Amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid monohydrate. Cephalexin has the molecular formula C 16 H 17 N3O4SH2O and the molecular weight is 365.41. Cephalexin has the following structural formula:. Each capsule contains cephalexin monohydrate equivalent to 250 mg, 333 mg, 500 mg, or 750 mg of cephalexin. The 250 mg, 333 mg, 500 mg and 750 mg capsules contain anhydrous lactose, colloidal silicon dioxide, magnesium stearate, FD & C Blue No. 1, D & C Yellow No. 10, gelatin, sodium lauryl sulphate, titanium dioxide. In addition, the 250 mg capsule contains FD & C Red No. 40; 333 mg and 750 mg Capsules contains FD & C Yellow No. 6. The imprinting ink contains; shellac, propylene glycol, strong ammonia solution and potassium hydroxide. Also black Iron oxide is used in 250mg, 333mg and 500mg and titanium dioxide is used in 750mg.</Description>
</NDC>
<NDC>
<NDCCode>80425-0159-5</NDCCode>
<PackageDescription>120 TABLET in 1 BOTTLE (80425-0159-5) </PackageDescription>
<NDC11Code>80425-0159-05</NDC11Code>
<ProductNDC>80425-0159</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tramadol Hcl</ProprietaryName>
<NonProprietaryName>Tramadol Hcl</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020622</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075964</ApplicationNumber>
<LabelerName>Advanced Rx Pharmacy of Tennessee, LLC</LabelerName>
<SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20020622</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>INDICATIONS AND USAGE. Tramadol hydrochloride tablets are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see WARNINGS AND PRECAUTIONS (5.1)], reserve tramadol hydrochloride tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]. Have not been tolerated or are not expected to be tolerated. Have not provided adequate analgesia or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Tramadol hydrochloride tablets, USP, for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride is (±)cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. The structural formula is. The molecular weight of tramadol hydrochloride is 299.8. Tramadol hydrochloride, USP is a white, bitter, crystalline and odorless powder. It is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride tablets, USP contain 50 mg of tramadol hydrochloride, USP, and are white in color. Inactive ingredients in the tablet are pregelatinized starch, lactose anhydrous, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, titanium dioxide, hypromellose and polysorbate 80.</Description>
</NDC>
<NDC>
<NDCCode>80425-0209-5</NDCCode>
<PackageDescription>6 CAPSULE in 1 BOTTLE (80425-0209-5) </PackageDescription>
<NDC11Code>80425-0209-05</NDC11Code>
<ProductNDC>80425-0209</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Celecoxib</ProprietaryName>
<NonProprietaryName>Celecoxib</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201221</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210071</ApplicationNumber>
<LabelerName>Advanced Rx Pharmacy of Tennessee, LLC</LabelerName>
<SubstanceName>CELECOXIB</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260319</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Celecoxib is indicated. 1.1 Osteoarthritis (OA). For the management of the signs and symptoms of OA [see CLINICAL STUDIES (14.1)]. 1.2 Rheumatoid Arthritis (RA). For the management of the signs and symptoms of RA [see CLINICAL STUDIES (14.2)]. 1.3 Juvenile Rheumatoid Arthritis (JRA). For the management of the signs and symptoms of JRA in patients 2 years and older [see CLINICAL STUDIES (14.3)]. 1.4 Ankylosing Spondylitis (AS). For the management of the signs and symptoms of AS [see CLINICAL STUDIES (14.4)]. 1.5 Acute Pain. For the management of acute pain in adults [see CLINICAL STUDIES (14.5)]. 1.6 Primary Dysmenorrhea. For the management of primary dysmenorrhea [see CLINICAL STUDIES (14.5)].</IndicationAndUsage>
<Description>Celecoxib capsule is a nonsteroidal anti-inflammatory drug, available as capsules containing 50 mg, 100 mg and 200 mg celecoxib for oral administration. The chemical name is 4-[5-(4-methylphenyl)-3-(trifluoromethyl)-1H-pyrazol-1-yl] benzenesulfonamide and is a diaryl-substituted pyrazole. The molecular weight is 381.38. Its molecular formula is C17H14F3N3O2S, and it has the following chemical structure. Celecoxib is a white to off-white powder with a pKa of 11.1 (sulfonamide moiety). Celecoxib is hydrophobic (log P is 3.5) and is practically insoluble in aqueous media at physiological pH range. The inactive ingredients in celecoxib capsules include: croscarmellose sodium, lactose monohydrate, magnesium stearate, povidone and sodium lauryl sulfate. The capsule shell contains gelatin and titanium dioxide. The imprinting ink contains the following: black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, shellac and strong ammonia solution.</Description>
</NDC>
</NDCList>