{
"NDC": [
{
"NDCCode": "80425-0169-3",
"PackageDescription": "4 CAPSULE, DELAYED RELEASE in 1 BOTTLE (80425-0169-3) ",
"NDC11Code": "80425-0169-03",
"ProductNDC": "80425-0169",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omeprazole",
"ProprietaryNameSuffix": "Dr",
"NonProprietaryName": "Omeprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20141031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091672",
"LabelerName": "Advanced Rx Pharmacy of Tennessee, LLC",
"SubstanceName": "OMEPRAZOLE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141031",
"SamplePackage": "N",
"IndicationAndUsage": "INDICATIONS AND USAGE. 1.1 Treatment of Active Duodenal Ulcer. Omeprazole delayed-release capsules are indicated for short-term treatment of active duodenal ulcer in adults. Most patients heal within four weeks. Some patients may require an additional four weeks of therapy. 1.2 Helicobacter pylori Eradication to Reduce the Risk of Duodenal Ulcer Recurrence. Eradication of H. pylori has been shown to reduce the risk of duodenal ulcer recurrence. Triple Therapy. Omeprazole delayed-release capsules in combination with clarithromycin and amoxicillin, is indicated for treatment of patients with H. pylori infection and duodenal ulcer disease (active or up to 1-year history) to eradicate H. pylori in adults. Dual Therapy. Omeprazole delayed-release capsules in combination with clarithromycin are indicated for treatment of patients with H. pylori infection and duodenal ulcer disease to eradicate H. pylori in adults. Among patients who fail therapy, omeprazole delayed-release capsules with clarithromycin is more likely to be associated with the development of clarithromycin resistance as compared with triple therapy. In patients who fail therapy, susceptibility testing should be done. If resistance to clarithromycin is demonstrated or susceptibility testing is not possible, alternative antimicrobial therapy should be instituted [see Clinical Pharmacology (12.4) and the clarithromycin prescribing information, Microbiology section]. 1.3 Treatment of Active Benign Gastric Ulcer. Omeprazole delayed-release capsules are indicated for short-term treatment (4 to 8 weeks) of active benign gastric ulcer in adults. 1.4 Treatment of Symptomatic Gastroesophageal Reflux Disease (GERD). Omeprazole delayed-release capsules are indicated for the treatment of heartburn and other symptoms associated with GERD for up to 4 weeks in patients 2 years of age and older. 1.5 Treatment of Erosive Esophagitis (EE) Due to Acid-Mediated GERD. Pediatric Patients 2 Years of Age to Adults. Omeprazole delayed-release capsules are indicated for the short-term treatment (4 to 8 weeks) of EE due to acid-mediated GERD that has been diagnosed by endoscopy in patients 2 years of age and older. The efficacy of omeprazole delayed-release capsules used for longer than 8 weeks in patients with EE has not been established. If a patient does not respond to 8 weeks of treatment, an additional 4 weeks of treatment may be given. If there is recurrence of EE or GERD symptoms (e.g., heartburn), additional 4 to 8 week courses of omeprazole delayed-release capsules may be considered. 1.6 Maintenance of Healing of EE Due to Acid-Mediated GERD. Omeprazole delayed-release capsules are indicated for the maintenance healing of EE due to acid-mediated GERD in patients 2 years of age and older. Controlled studies do not extend beyond 12 months. 1.7 Pathological Hypersecretory Conditions. Omeprazole delayed-release capsules are indicated for the long-term treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison syndrome, multiple endocrine adenomas and systemic mastocytosis) in adults.",
"Description": "The active ingredient in Omeprazole Delayed-Release Capsules, USP is a substituted benzimidazole, 5-methoxy-2[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42 g/mol. The structural formula is. Omeprazole, USP is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole, USP is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg or 40 mg of omeprazole, USP in the form of enteric-coated granules with the following inactive ingredients: anhydrous lactose, cetyl alcohol, di-sodium hydrogen phosphate dihydrate, hypromellose, hypromellose phthalate, mannitol, simethicone emulsion 30%, sodium lauryl sulfate and sugar sphere. The capsule shell for Omeprazole Delayed-Release Capsules, USP 10 mg contains D&C Yellow No.10, FD&C Blue No.1, FD&C Red No. 40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for Omeprazole Delayed-Release Capsules, USP 20 mg contains FD&C Blue No.1, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for Omeprazole Delayed-Release Capsules, USP 40 mg contains D&C Yellow No.10, FD&C Blue No.1, FD&C Red No. 40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The imprinting ink has the following components: black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, strong ammonia solution and shellac."
},
{
"NDCCode": "80425-0169-1",
"PackageDescription": "30 CAPSULE, DELAYED RELEASE in 1 BOTTLE (80425-0169-1) ",
"NDC11Code": "80425-0169-01",
"ProductNDC": "80425-0169",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omeprazole",
"ProprietaryNameSuffix": "Dr",
"NonProprietaryName": "Omeprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20141031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091672",
"LabelerName": "Advanced Rx Pharmacy of Tennessee, LLC",
"SubstanceName": "OMEPRAZOLE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141031",
"SamplePackage": "N",
"IndicationAndUsage": "INDICATIONS AND USAGE. 1.1 Treatment of Active Duodenal Ulcer. Omeprazole delayed-release capsules are indicated for short-term treatment of active duodenal ulcer in adults. Most patients heal within four weeks. Some patients may require an additional four weeks of therapy. 1.2 Helicobacter pylori Eradication to Reduce the Risk of Duodenal Ulcer Recurrence. Eradication of H. pylori has been shown to reduce the risk of duodenal ulcer recurrence. Triple Therapy. Omeprazole delayed-release capsules in combination with clarithromycin and amoxicillin, is indicated for treatment of patients with H. pylori infection and duodenal ulcer disease (active or up to 1-year history) to eradicate H. pylori in adults. Dual Therapy. Omeprazole delayed-release capsules in combination with clarithromycin are indicated for treatment of patients with H. pylori infection and duodenal ulcer disease to eradicate H. pylori in adults. Among patients who fail therapy, omeprazole delayed-release capsules with clarithromycin is more likely to be associated with the development of clarithromycin resistance as compared with triple therapy. In patients who fail therapy, susceptibility testing should be done. If resistance to clarithromycin is demonstrated or susceptibility testing is not possible, alternative antimicrobial therapy should be instituted [see Clinical Pharmacology (12.4) and the clarithromycin prescribing information, Microbiology section]. 1.3 Treatment of Active Benign Gastric Ulcer. Omeprazole delayed-release capsules are indicated for short-term treatment (4 to 8 weeks) of active benign gastric ulcer in adults. 1.4 Treatment of Symptomatic Gastroesophageal Reflux Disease (GERD). Omeprazole delayed-release capsules are indicated for the treatment of heartburn and other symptoms associated with GERD for up to 4 weeks in patients 2 years of age and older. 1.5 Treatment of Erosive Esophagitis (EE) Due to Acid-Mediated GERD. Pediatric Patients 2 Years of Age to Adults. Omeprazole delayed-release capsules are indicated for the short-term treatment (4 to 8 weeks) of EE due to acid-mediated GERD that has been diagnosed by endoscopy in patients 2 years of age and older. The efficacy of omeprazole delayed-release capsules used for longer than 8 weeks in patients with EE has not been established. If a patient does not respond to 8 weeks of treatment, an additional 4 weeks of treatment may be given. If there is recurrence of EE or GERD symptoms (e.g., heartburn), additional 4 to 8 week courses of omeprazole delayed-release capsules may be considered. 1.6 Maintenance of Healing of EE Due to Acid-Mediated GERD. Omeprazole delayed-release capsules are indicated for the maintenance healing of EE due to acid-mediated GERD in patients 2 years of age and older. Controlled studies do not extend beyond 12 months. 1.7 Pathological Hypersecretory Conditions. Omeprazole delayed-release capsules are indicated for the long-term treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison syndrome, multiple endocrine adenomas and systemic mastocytosis) in adults.",
"Description": "The active ingredient in Omeprazole Delayed-Release Capsules, USP is a substituted benzimidazole, 5-methoxy-2[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42 g/mol. The structural formula is. Omeprazole, USP is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole, USP is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg or 40 mg of omeprazole, USP in the form of enteric-coated granules with the following inactive ingredients: anhydrous lactose, cetyl alcohol, di-sodium hydrogen phosphate dihydrate, hypromellose, hypromellose phthalate, mannitol, simethicone emulsion 30%, sodium lauryl sulfate and sugar sphere. The capsule shell for Omeprazole Delayed-Release Capsules, USP 10 mg contains D&C Yellow No.10, FD&C Blue No.1, FD&C Red No. 40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for Omeprazole Delayed-Release Capsules, USP 20 mg contains FD&C Blue No.1, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for Omeprazole Delayed-Release Capsules, USP 40 mg contains D&C Yellow No.10, FD&C Blue No.1, FD&C Red No. 40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The imprinting ink has the following components: black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, strong ammonia solution and shellac."
},
{
"NDCCode": "80425-0169-2",
"PackageDescription": "60 CAPSULE, DELAYED RELEASE in 1 BOTTLE (80425-0169-2) ",
"NDC11Code": "80425-0169-02",
"ProductNDC": "80425-0169",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omeprazole",
"ProprietaryNameSuffix": "Dr",
"NonProprietaryName": "Omeprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20141031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091672",
"LabelerName": "Advanced Rx Pharmacy of Tennessee, LLC",
"SubstanceName": "OMEPRAZOLE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141031",
"SamplePackage": "N",
"IndicationAndUsage": "INDICATIONS AND USAGE. 1.1 Treatment of Active Duodenal Ulcer. Omeprazole delayed-release capsules are indicated for short-term treatment of active duodenal ulcer in adults. Most patients heal within four weeks. Some patients may require an additional four weeks of therapy. 1.2 Helicobacter pylori Eradication to Reduce the Risk of Duodenal Ulcer Recurrence. Eradication of H. pylori has been shown to reduce the risk of duodenal ulcer recurrence. Triple Therapy. Omeprazole delayed-release capsules in combination with clarithromycin and amoxicillin, is indicated for treatment of patients with H. pylori infection and duodenal ulcer disease (active or up to 1-year history) to eradicate H. pylori in adults. Dual Therapy. Omeprazole delayed-release capsules in combination with clarithromycin are indicated for treatment of patients with H. pylori infection and duodenal ulcer disease to eradicate H. pylori in adults. Among patients who fail therapy, omeprazole delayed-release capsules with clarithromycin is more likely to be associated with the development of clarithromycin resistance as compared with triple therapy. In patients who fail therapy, susceptibility testing should be done. If resistance to clarithromycin is demonstrated or susceptibility testing is not possible, alternative antimicrobial therapy should be instituted [see Clinical Pharmacology (12.4) and the clarithromycin prescribing information, Microbiology section]. 1.3 Treatment of Active Benign Gastric Ulcer. Omeprazole delayed-release capsules are indicated for short-term treatment (4 to 8 weeks) of active benign gastric ulcer in adults. 1.4 Treatment of Symptomatic Gastroesophageal Reflux Disease (GERD). Omeprazole delayed-release capsules are indicated for the treatment of heartburn and other symptoms associated with GERD for up to 4 weeks in patients 2 years of age and older. 1.5 Treatment of Erosive Esophagitis (EE) Due to Acid-Mediated GERD. Pediatric Patients 2 Years of Age to Adults. Omeprazole delayed-release capsules are indicated for the short-term treatment (4 to 8 weeks) of EE due to acid-mediated GERD that has been diagnosed by endoscopy in patients 2 years of age and older. The efficacy of omeprazole delayed-release capsules used for longer than 8 weeks in patients with EE has not been established. If a patient does not respond to 8 weeks of treatment, an additional 4 weeks of treatment may be given. If there is recurrence of EE or GERD symptoms (e.g., heartburn), additional 4 to 8 week courses of omeprazole delayed-release capsules may be considered. 1.6 Maintenance of Healing of EE Due to Acid-Mediated GERD. Omeprazole delayed-release capsules are indicated for the maintenance healing of EE due to acid-mediated GERD in patients 2 years of age and older. Controlled studies do not extend beyond 12 months. 1.7 Pathological Hypersecretory Conditions. Omeprazole delayed-release capsules are indicated for the long-term treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison syndrome, multiple endocrine adenomas and systemic mastocytosis) in adults.",
"Description": "The active ingredient in Omeprazole Delayed-Release Capsules, USP is a substituted benzimidazole, 5-methoxy-2[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42 g/mol. The structural formula is. Omeprazole, USP is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole, USP is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg or 40 mg of omeprazole, USP in the form of enteric-coated granules with the following inactive ingredients: anhydrous lactose, cetyl alcohol, di-sodium hydrogen phosphate dihydrate, hypromellose, hypromellose phthalate, mannitol, simethicone emulsion 30%, sodium lauryl sulfate and sugar sphere. The capsule shell for Omeprazole Delayed-Release Capsules, USP 10 mg contains D&C Yellow No.10, FD&C Blue No.1, FD&C Red No. 40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for Omeprazole Delayed-Release Capsules, USP 20 mg contains FD&C Blue No.1, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for Omeprazole Delayed-Release Capsules, USP 40 mg contains D&C Yellow No.10, FD&C Blue No.1, FD&C Red No. 40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The imprinting ink has the following components: black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, strong ammonia solution and shellac."
},
{
"NDCCode": "0169-2081-03",
"PackageDescription": "1 SYRINGE, PLASTIC in 1 CARTON (0169-2081-03) / 3 mL in 1 SYRINGE, PLASTIC",
"NDC11Code": "00169-2081-03",
"ProductNDC": "0169-2081",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alhemo",
"NonProprietaryName": "Concizumab",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20250219",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761315",
"LabelerName": "Novo Nordisk",
"SubstanceName": "CONCIZUMAB",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Tissue Factor Pathway Inhibitor Antagonist [EPC], Tissue Factor Pathway Inhibitor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-08-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250324",
"SamplePackage": "N",
"IndicationAndUsage": "Alhemo is indicated for routine prophylaxis to prevent or reduce the frequency of bleeding episodes in adult and pediatric patients 12 years of age and older with: 1 hemophilia A (congenital factor VIII deficiency) with or without FVIII inhibitors, 2 hemophilia B (congenital factor IX deficiency) with or without FIX inhibitors.",
"Description": "Concizumab-mtci, is a humanized IgG4 monoclonal antibody produced by recombinant DNA technology in Chinese Hamster Ovary (CHO) cells with an approximate molecular weight of 149 kDa. Alhemo (concizumab-mtci) injection is a clear to slightly opalescent, and colorless to slightly yellow solution that may contain translucent to white particles. Alhemo is supplied as a single-patient-use prefilled pen for subcutaneous injection. Each 1 mL of Alhemo single-patient-use prefilled pen (60 mg/1.5 mL) contains 40 mg active ingredient concizumab-mtci. Each 1 mL of Alhemo single-patient-use prefilled pen (150 mg/1.5 mL) contains 100 mg active ingredient concizumab-mtci. Each 1 mL of Alhemo single-patient-use prefilled pen (300 mg/3 mL) contains 100 mg active ingredient concizumab-mtci. Each 1 mL of Alhemo single-patient-use prefilled pen contains the following excipients: arginine hydrochloride (5.27 mg), histidine (5.12 mg), phenol (3.5 mg), polysorbate 80 (0.25 mg), sodium chloride (1.46 mg), sucrose (51.3 mg), and water for injection. Hydrochloric acid and sodium hydroxide may be added to adjust the pH to 6.0."
},
{
"NDCCode": "0169-2101-25",
"PackageDescription": "5 SYRINGE, PLASTIC in 1 CARTON (0169-2101-25) / 3 mL in 1 SYRINGE, PLASTIC (0169-2101-12) ",
"NDC11Code": "00169-2101-25",
"ProductNDC": "0169-2101",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Novolog",
"NonProprietaryName": "Insulin Aspart",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20030122",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020986",
"LabelerName": "Novo Nordisk",
"SubstanceName": "INSULIN ASPART",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [CS]",
"Status": "Active",
"LastUpdate": "2025-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210525",
"SamplePackage": "N",
"IndicationAndUsage": "NOVOLOG is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.",
"Description": "Insulin aspart is a rapid-acting human insulin analog homologous with regular human insulin with the exception of a single substitution of the amino acid proline by aspartic acid in position B28, and is produced by recombinant DNA technology utilizing Saccharomyces cerevisiae (baker's yeast). Insulin aspart has the empirical formula C256H381N65079S6 and a molecular weight of 5825.8 Da. NOVOLOG (insulin aspart) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL contains 100 units of insulin aspart and the inactive ingredients: disodium hydrogen phosphate dihydrate (1.25 mg), glycerin (16.0 mg), metacresol (1.72 mg), phenol (1.50 mg), sodium chloride (0.58 mg), zinc (19.6 mcg), and Water for Injection, USP. NOVOLOG has a pH of 7.2-7.6. Hydrochloric acid 10% and/or sodium hydroxide 10% may be added to adjust pH."
},
{
"NDCCode": "0169-2201-25",
"PackageDescription": "5 SYRINGE in 1 CARTON (0169-2201-25) / 3 mL in 1 SYRINGE",
"NDC11Code": "00169-2201-25",
"ProductNDC": "0169-2201",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Novolog Mix 70/30",
"NonProprietaryName": "Insulin Aspart",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20020911",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA021172",
"LabelerName": "Novo Nordisk Pharmaceutical Industries, LP",
"SubstanceName": "INSULIN ASPART",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [CS]",
"Status": "Active",
"LastUpdate": "2026-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210701",
"SamplePackage": "N",
"IndicationAndUsage": "NOVOLOG MIX 70/30 is a mixture of insulin aspart protamine and insulin aspart indicated to improve glycemic control in adult patients with diabetes mellitus. Limitations of Use: 1 NOVOLOG MIX 70/30 is not recommended for the treatment of diabetic ketoacidosis., 2 The proportions of rapid-acting and long-acting insulins in NOVOLOG MIX 70/30 are fixed and do not allow for basal versus prandial dose adjustments.",
"Description": "Insulin aspart protamine and insulin aspart is a human insulin analog containing 70% insulin aspart protamine crystals and 30% soluble insulin aspart. Insulin aspart is homologous with regular human insulin with the exception of a single substitution of the amino acid proline by aspartic acid in position B28, and is produced by recombinant DNA technology utilizing Saccharomyces cerevisiae (baker’s yeast). Insulin aspart has the empirical formula C256H381N65O79S6 and a molecular weight of 5825.8 Da. Figure 1. Structural formula of insulin aspart. NOVOLOG MIX 70/30 (insulin aspart protamine and insulin aspart) is a uniform, white and cloudy, sterile injectable suspension for subcutaneous use. Each mL contains 100 units of insulin aspart and the inactive ingredients: disodium hydrogen phosphate dihydrate (1.25 mg), glycerol (16.0 mg), metacresol (1.72 mg), phenol (1.50 mg), protamine sulfate (0.32 mg), sodium chloride (0.877 mg), zinc (19.6 mcg), and Water for Injection, USP. NOVOLOG MIX 70/30 has a pH of 7.20 - 7.44. Hydrochloric acid or sodium hydroxide may be added to adjust pH."
},
{
"NDCCode": "0169-2550-13",
"PackageDescription": "3 SYRINGE, PLASTIC in 1 CARTON (0169-2550-13) > 3 mL in 1 SYRINGE, PLASTIC",
"NDC11Code": "00169-2550-13",
"ProductNDC": "0169-2550",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tresiba",
"NonProprietaryName": "Insulin Degludec",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20150925",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA203314",
"LabelerName": "Novo Nordisk",
"SubstanceName": "INSULIN DEGLUDEC",
"StrengthNumber": "200",
"StrengthUnit": "U/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [CS]",
"Status": "Active",
"LastUpdate": "2022-07-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150925",
"SamplePackage": "N",
"IndicationAndUsage": "TRESIBA is indicated to improve glycemic control in patients 1 year of age and older with diabetes mellitus. Limitations of Use: 1 Not recommended for the treatment of diabetic ketoacidosis.",
"Description": "Insulin degludec is a long-acting basal human insulin analog for subcutaneous injection produced by a process that includes expression of recombinant DNA in Saccharomyces cerevisiae followed by chemical modification. Insulin degludec differs from human insulin in that the amino acid threonine in position B30 has been omitted and a side-chain consisting of glutamic acid and a C16 fatty acid has been attached (chemical name: LysB29(Nε-hexadecandioyl-γ-Glu) des(B30) human insulin). Insulin degludec has a molecular formula of C274H411N65O81S6 and a molecular weight of 6.104 kDa. It has the following structure. Figure 1: Structural Formula of Insulin Degludec. TRESIBA (insulin degludec) injection is a sterile, aqueous, clear, and colorless solution available as 100 units/mL (U-100) or 200 units/mL (U-200) for subcutaneous use. For the 100 units/mL solution, each mL contains 100 units of insulin degludec and glycerin (19.6 mg), metacresol (1.72 mg), phenol (1.5 mg), zinc (32.7 mcg), and Water for Injection, USP. For the 200 units/mL solution, each mL contains 200 units of insulin degludec and glycerin (19.6 mg), metacresol (1.72 mg), phenol (1.5 mg), zinc (71.9 mcg), and Water for Injection, USP. TRESIBA has a pH of approximately 7.6. Hydrochloric acid or sodium hydroxide may be added to adjust pH."
},
{
"NDCCode": "0169-2550-97",
"PackageDescription": "1 SYRINGE, PLASTIC in 1 CARTON (0169-2550-97) > 3 mL in 1 SYRINGE, PLASTIC (0169-2550-90) ",
"NDC11Code": "00169-2550-97",
"ProductNDC": "0169-2550",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tresiba",
"NonProprietaryName": "Insulin Degludec",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20150925",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA203314",
"LabelerName": "Novo Nordisk",
"SubstanceName": "INSULIN DEGLUDEC",
"StrengthNumber": "200",
"StrengthUnit": "U/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [CS]",
"Status": "Active",
"LastUpdate": "2022-07-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150925",
"SamplePackage": "N",
"IndicationAndUsage": "TRESIBA is indicated to improve glycemic control in patients 1 year of age and older with diabetes mellitus. Limitations of Use: 1 Not recommended for the treatment of diabetic ketoacidosis.",
"Description": "Insulin degludec is a long-acting basal human insulin analog for subcutaneous injection produced by a process that includes expression of recombinant DNA in Saccharomyces cerevisiae followed by chemical modification. Insulin degludec differs from human insulin in that the amino acid threonine in position B30 has been omitted and a side-chain consisting of glutamic acid and a C16 fatty acid has been attached (chemical name: LysB29(Nε-hexadecandioyl-γ-Glu) des(B30) human insulin). Insulin degludec has a molecular formula of C274H411N65O81S6 and a molecular weight of 6.104 kDa. It has the following structure. Figure 1: Structural Formula of Insulin Degludec. TRESIBA (insulin degludec) injection is a sterile, aqueous, clear, and colorless solution available as 100 units/mL (U-100) or 200 units/mL (U-200) for subcutaneous use. For the 100 units/mL solution, each mL contains 100 units of insulin degludec and glycerin (19.6 mg), metacresol (1.72 mg), phenol (1.5 mg), zinc (32.7 mcg), and Water for Injection, USP. For the 200 units/mL solution, each mL contains 200 units of insulin degludec and glycerin (19.6 mg), metacresol (1.72 mg), phenol (1.5 mg), zinc (71.9 mcg), and Water for Injection, USP. TRESIBA has a pH of approximately 7.6. Hydrochloric acid or sodium hydroxide may be added to adjust pH."
},
{
"NDCCode": "0169-2660-15",
"PackageDescription": "5 SYRINGE, PLASTIC in 1 CARTON (0169-2660-15) > 3 mL in 1 SYRINGE, PLASTIC",
"NDC11Code": "00169-2660-15",
"ProductNDC": "0169-2660",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tresiba",
"NonProprietaryName": "Insulin Degludec",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20150925",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA203314",
"LabelerName": "Novo Nordisk",
"SubstanceName": "INSULIN DEGLUDEC",
"StrengthNumber": "100",
"StrengthUnit": "U/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [CS]",
"Status": "Active",
"LastUpdate": "2022-07-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150925",
"SamplePackage": "N",
"IndicationAndUsage": "TRESIBA is indicated to improve glycemic control in patients 1 year of age and older with diabetes mellitus. Limitations of Use: 1 Not recommended for the treatment of diabetic ketoacidosis.",
"Description": "Insulin degludec is a long-acting basal human insulin analog for subcutaneous injection produced by a process that includes expression of recombinant DNA in Saccharomyces cerevisiae followed by chemical modification. Insulin degludec differs from human insulin in that the amino acid threonine in position B30 has been omitted and a side-chain consisting of glutamic acid and a C16 fatty acid has been attached (chemical name: LysB29(Nε-hexadecandioyl-γ-Glu) des(B30) human insulin). Insulin degludec has a molecular formula of C274H411N65O81S6 and a molecular weight of 6.104 kDa. It has the following structure. Figure 1: Structural Formula of Insulin Degludec. TRESIBA (insulin degludec) injection is a sterile, aqueous, clear, and colorless solution available as 100 units/mL (U-100) or 200 units/mL (U-200) for subcutaneous use. For the 100 units/mL solution, each mL contains 100 units of insulin degludec and glycerin (19.6 mg), metacresol (1.72 mg), phenol (1.5 mg), zinc (32.7 mcg), and Water for Injection, USP. For the 200 units/mL solution, each mL contains 200 units of insulin degludec and glycerin (19.6 mg), metacresol (1.72 mg), phenol (1.5 mg), zinc (71.9 mcg), and Water for Injection, USP. TRESIBA has a pH of approximately 7.6. Hydrochloric acid or sodium hydroxide may be added to adjust pH."
},
{
"NDCCode": "0169-2660-97",
"PackageDescription": "1 SYRINGE, PLASTIC in 1 CARTON (0169-2660-97) > 3 mL in 1 SYRINGE, PLASTIC (0169-2660-90) ",
"NDC11Code": "00169-2660-97",
"ProductNDC": "0169-2660",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tresiba",
"NonProprietaryName": "Insulin Degludec",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20150925",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA203314",
"LabelerName": "Novo Nordisk",
"SubstanceName": "INSULIN DEGLUDEC",
"StrengthNumber": "100",
"StrengthUnit": "U/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [CS]",
"Status": "Active",
"LastUpdate": "2022-07-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150925",
"SamplePackage": "N",
"IndicationAndUsage": "TRESIBA is indicated to improve glycemic control in patients 1 year of age and older with diabetes mellitus. Limitations of Use: 1 Not recommended for the treatment of diabetic ketoacidosis.",
"Description": "Insulin degludec is a long-acting basal human insulin analog for subcutaneous injection produced by a process that includes expression of recombinant DNA in Saccharomyces cerevisiae followed by chemical modification. Insulin degludec differs from human insulin in that the amino acid threonine in position B30 has been omitted and a side-chain consisting of glutamic acid and a C16 fatty acid has been attached (chemical name: LysB29(Nε-hexadecandioyl-γ-Glu) des(B30) human insulin). Insulin degludec has a molecular formula of C274H411N65O81S6 and a molecular weight of 6.104 kDa. It has the following structure. Figure 1: Structural Formula of Insulin Degludec. TRESIBA (insulin degludec) injection is a sterile, aqueous, clear, and colorless solution available as 100 units/mL (U-100) or 200 units/mL (U-200) for subcutaneous use. For the 100 units/mL solution, each mL contains 100 units of insulin degludec and glycerin (19.6 mg), metacresol (1.72 mg), phenol (1.5 mg), zinc (32.7 mcg), and Water for Injection, USP. For the 200 units/mL solution, each mL contains 200 units of insulin degludec and glycerin (19.6 mg), metacresol (1.72 mg), phenol (1.5 mg), zinc (71.9 mcg), and Water for Injection, USP. TRESIBA has a pH of approximately 7.6. Hydrochloric acid or sodium hydroxide may be added to adjust pH."
},
{
"NDCCode": "0169-2770-15",
"PackageDescription": "5 SYRINGE in 1 CARTON (0169-2770-15) > 3 mL in 1 SYRINGE",
"NDC11Code": "00169-2770-15",
"ProductNDC": "0169-2770",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ryzodeg 70/30",
"NonProprietaryName": "Insulin Degludec And Insulin Aspart Injection",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20180101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA203313",
"LabelerName": "Novo Nordisk",
"SubstanceName": "INSULIN DEGLUDEC; INSULIN ASPART",
"StrengthNumber": "70; 30",
"StrengthUnit": "U/mL; U/mL",
"Pharm_Classes": "Insulin [Chemical/Ingredient],Insulin Analog [EPC],Insulin [Chemical/Ingredient],Insulin Analog [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-01-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231",
"StartMarketingDatePackage": "20180101",
"SamplePackage": "N"
},
{
"NDCCode": "0169-2770-97",
"PackageDescription": "1 SYRINGE in 1 CARTON (0169-2770-97) > 3 mL in 1 SYRINGE",
"NDC11Code": "00169-2770-97",
"ProductNDC": "0169-2770",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ryzodeg 70/30",
"NonProprietaryName": "Insulin Degludec And Insulin Aspart Injection",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20180101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA203313",
"LabelerName": "Novo Nordisk",
"SubstanceName": "INSULIN DEGLUDEC; INSULIN ASPART",
"StrengthNumber": "70; 30",
"StrengthUnit": "U/mL; U/mL",
"Pharm_Classes": "Insulin [Chemical/Ingredient],Insulin Analog [EPC],Insulin [Chemical/Ingredient],Insulin Analog [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-01-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231",
"StartMarketingDatePackage": "20180101",
"SamplePackage": "N"
},
{
"NDCCode": "0169-2800-15",
"PackageDescription": "5 SYRINGE, PLASTIC in 1 CARTON (0169-2800-15) / 3 mL in 1 SYRINGE, PLASTIC",
"NDC11Code": "00169-2800-15",
"ProductNDC": "0169-2800",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Saxenda",
"NonProprietaryName": "Liraglutide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20141231",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA206321",
"LabelerName": "Novo Nordisk Pharmaceutical Industries, LP",
"SubstanceName": "LIRAGLUTIDE",
"StrengthNumber": "6",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "GLP-1 Receptor Agonist [EPC], Glucagon-Like Peptide 1 [CS], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150119",
"SamplePackage": "N",
"IndicationAndUsage": "SAXENDA is indicated in combination with a reduced calorie diet and increased physical activity to reduce excess body weight and maintain weight reduction long term in: 1 Adults and pediatric patients aged 12 years and older with body weight greater than 60 kg and obesity., 2 Adults with overweight in the presence of at least one weight-related comorbid condition.",
"Description": "SAXENDA contains liraglutide, an analog of human GLP-1 and acts as a GLP-1 receptor agonist. The peptide precursor of liraglutide, produced by a process that includes expression of recombinant DNA in Saccharomyces cerevisiae, has been engineered to be 97% homologous to native human GLP-1 by substituting arginine for lysine at position 34. Liraglutide is made by attaching a C-16 fatty acid (palmitic acid) with a glutamic acid spacer on the remaining lysine residue at position 26 of the peptide precursor. The molecular formula of liraglutide is C172H265N43O51 and the molecular weight is 3751.2 Daltons. The structural formula (Figure 1) is. Figure 1. Structural Formula of liraglutide. SAXENDA injection is a sterile, aqueous, clear, colorless or almost colorless solution for subcutaneous use. Each 1 mL of SAXENDA solution contains 6 mg of liraglutide and the following inactive ingredients: disodium phosphate dihydrate, 1.42 mg; propylene glycol, 14 mg; phenol, 5.5 mg; and water for injection. SAXENDA has a pH of approximately 8.15, hydrochloric acid or sodium hydroxide may be added to adjust pH. Each prefilled pen contains a 3 mL solution of SAXENDA equivalent to 18 mg liraglutide (free-base, anhydrous)."
},
{
"NDCCode": "0169-2800-90",
"PackageDescription": "1 SYRINGE, PLASTIC in 1 CARTON (0169-2800-90) / 3 mL in 1 SYRINGE, PLASTIC",
"NDC11Code": "00169-2800-90",
"ProductNDC": "0169-2800",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Saxenda",
"NonProprietaryName": "Liraglutide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20141231",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA206321",
"LabelerName": "Novo Nordisk Pharmaceutical Industries, LP",
"SubstanceName": "LIRAGLUTIDE",
"StrengthNumber": "6",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "GLP-1 Receptor Agonist [EPC], Glucagon-Like Peptide 1 [CS], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150119",
"SamplePackage": "N",
"IndicationAndUsage": "SAXENDA is indicated in combination with a reduced calorie diet and increased physical activity to reduce excess body weight and maintain weight reduction long term in: 1 Adults and pediatric patients aged 12 years and older with body weight greater than 60 kg and obesity., 2 Adults with overweight in the presence of at least one weight-related comorbid condition.",
"Description": "SAXENDA contains liraglutide, an analog of human GLP-1 and acts as a GLP-1 receptor agonist. The peptide precursor of liraglutide, produced by a process that includes expression of recombinant DNA in Saccharomyces cerevisiae, has been engineered to be 97% homologous to native human GLP-1 by substituting arginine for lysine at position 34. Liraglutide is made by attaching a C-16 fatty acid (palmitic acid) with a glutamic acid spacer on the remaining lysine residue at position 26 of the peptide precursor. The molecular formula of liraglutide is C172H265N43O51 and the molecular weight is 3751.2 Daltons. The structural formula (Figure 1) is. Figure 1. Structural Formula of liraglutide. SAXENDA injection is a sterile, aqueous, clear, colorless or almost colorless solution for subcutaneous use. Each 1 mL of SAXENDA solution contains 6 mg of liraglutide and the following inactive ingredients: disodium phosphate dihydrate, 1.42 mg; propylene glycol, 14 mg; phenol, 5.5 mg; and water for injection. SAXENDA has a pH of approximately 8.15, hydrochloric acid or sodium hydroxide may be added to adjust pH. Each prefilled pen contains a 3 mL solution of SAXENDA equivalent to 18 mg liraglutide (free-base, anhydrous)."
},
{
"NDCCode": "0169-2800-97",
"PackageDescription": "1 SYRINGE, PLASTIC in 1 CARTON (0169-2800-97) / 3 mL in 1 SYRINGE, PLASTIC",
"NDC11Code": "00169-2800-97",
"ProductNDC": "0169-2800",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Saxenda",
"NonProprietaryName": "Liraglutide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20141231",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA206321",
"LabelerName": "Novo Nordisk Pharmaceutical Industries, LP",
"SubstanceName": "LIRAGLUTIDE",
"StrengthNumber": "6",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "GLP-1 Receptor Agonist [EPC], Glucagon-Like Peptide 1 [CS], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150119",
"SamplePackage": "N",
"IndicationAndUsage": "SAXENDA is indicated in combination with a reduced calorie diet and increased physical activity to reduce excess body weight and maintain weight reduction long term in: 1 Adults and pediatric patients aged 12 years and older with body weight greater than 60 kg and obesity., 2 Adults with overweight in the presence of at least one weight-related comorbid condition.",
"Description": "SAXENDA contains liraglutide, an analog of human GLP-1 and acts as a GLP-1 receptor agonist. The peptide precursor of liraglutide, produced by a process that includes expression of recombinant DNA in Saccharomyces cerevisiae, has been engineered to be 97% homologous to native human GLP-1 by substituting arginine for lysine at position 34. Liraglutide is made by attaching a C-16 fatty acid (palmitic acid) with a glutamic acid spacer on the remaining lysine residue at position 26 of the peptide precursor. The molecular formula of liraglutide is C172H265N43O51 and the molecular weight is 3751.2 Daltons. The structural formula (Figure 1) is. Figure 1. Structural Formula of liraglutide. SAXENDA injection is a sterile, aqueous, clear, colorless or almost colorless solution for subcutaneous use. Each 1 mL of SAXENDA solution contains 6 mg of liraglutide and the following inactive ingredients: disodium phosphate dihydrate, 1.42 mg; propylene glycol, 14 mg; phenol, 5.5 mg; and water for injection. SAXENDA has a pH of approximately 8.15, hydrochloric acid or sodium hydroxide may be added to adjust pH. Each prefilled pen contains a 3 mL solution of SAXENDA equivalent to 18 mg liraglutide (free-base, anhydrous)."
},
{
"NDCCode": "0169-2911-15",
"PackageDescription": "5 SYRINGE, PLASTIC in 1 CARTON (0169-2911-15) / 3 mL in 1 SYRINGE, PLASTIC",
"NDC11Code": "00169-2911-15",
"ProductNDC": "0169-2911",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Xultophy 100/3.6",
"NonProprietaryName": "Insulin Degludec And Liraglutide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20161121",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA208583",
"LabelerName": "Novo Nordisk",
"SubstanceName": "INSULIN DEGLUDEC; LIRAGLUTIDE",
"StrengthNumber": "100; 3.6",
"StrengthUnit": "[iU]/mL; mg/mL",
"Pharm_Classes": "GLP-1 Receptor Agonist [EPC], Glucagon-Like Peptide 1 [CS], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Insulin Analog [EPC], Insulin [CS]",
"Status": "Active",
"LastUpdate": "2025-10-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20161121",
"SamplePackage": "N",
"IndicationAndUsage": "XULTOPHY 100/3.6 is a combination of insulin degludec and liraglutide and is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. Limitations of Use: 1 XULTOPHY 100/3.6 contains liraglutide. Coadministration with any other product containing liraglutide or another glucagon-like peptide-1 (GLP-1) receptor agonist is not recommended [see Warnings and Precautions (5.5)]., 2 XULTOPHY 100/3.6 is not recommended for the treatment of diabetic ketoacidosis., 3 XULTOPHY 100/3.6 has not been studied in combination with prandial insulin.",
"Description": "Insulin degludec. Insulin degludec is a long-acting basal human insulin analog. Insulin degludec is produced by a process that includes expression of recombinant DNA in Saccharomyces cerevisiae followed by chemical modification. Insulin degludec differs from human insulin in that the amino acid threonine in position B30 has been omitted and a side-chain consisting of glutamic acid and a C16 fatty acid has been attached (chemical name: LysB29(Nε-hexadecandioyl-γ-Glu) des(B30) human insulin). Insulin degludec has a molecular formula of C274H411N65O81S6 and a molecular weight of 6.104 kDa. It has the following structure. Figure 1. Structural Formula of Insulin degludec. Liraglutide. Liraglutide is an analog of human GLP-1 and acts as a GLP-1 receptor agonist. The peptide precursor of liraglutide, produced by a process that includes expression of recombinant DNA in Saccharomyces cerevisiae, has been engineered to be 97% homologous to native human GLP-1 by substituting arginine for lysine at position 34. Liraglutide is made by attaching a C16 fatty acid (palmitic acid) with a glutamic acid spacer on the remaining lysine residue at position 26 of the peptide precursor. The molecular formula of liraglutide is C172H265N43O51 and the molecular weight is 3.751 kDa. It has the following structure. Figure 2. Structural Formula of Liraglutide. XULTOPHY 100/3.6 (insulin degludec and liraglutide) injection, for subcutaneous use, is a combination of a long-acting basal human insulin analog, insulin degludec, and a GLP-1 receptor agonist, liraglutide. XULTOPHY 100/3.6 is a sterile, aqueous, clear, and colorless solution. Each prefilled pen contains 3 mL equivalent to 300 units insulin degludec and 10.8 mg liraglutide. Each mL contains 100 units insulin degludec and 3.6 mg liraglutide. XULTOPHY 100/3.6 contains the following inactive ingredients per mL: glycerol (19.7 mg), phenol (5.7 mg), zinc (55 mcg), and Water for Injection, USP. XULTOPHY 100/3.6 has a pH of approximately 8.15. Hydrochloric acid or sodium hydroxide may be added to adjust pH."
},
{
"NDCCode": "0169-2911-97",
"PackageDescription": "1 SYRINGE, PLASTIC in 1 CARTON (0169-2911-97) > 3 mL in 1 SYRINGE, PLASTIC (0169-2911-90) ",
"NDC11Code": "00169-2911-97",
"ProductNDC": "0169-2911",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Xultophy 100/3.6",
"NonProprietaryName": "(insulin Degludec And Liraglutide)",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20161121",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA208583",
"LabelerName": "Novo Nordisk",
"SubstanceName": "INSULIN DEGLUDEC; LIRAGLUTIDE",
"StrengthNumber": "100; 3.6",
"StrengthUnit": "[iU]/mL; mg/mL",
"Pharm_Classes": "GLP-1 Receptor Agonist [EPC], Glucagon-Like Peptide 1 [CS], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Insulin Analog [EPC], Insulin [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-06-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20161121",
"SamplePackage": "N"
},
{
"NDCCode": "0169-3003-15",
"PackageDescription": "5 SYRINGE, PLASTIC in 1 CARTON (0169-3003-15) > 3 mL in 1 SYRINGE, PLASTIC (0169-3003-01) ",
"NDC11Code": "00169-3003-15",
"ProductNDC": "0169-3003",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Novolin",
"ProprietaryNameSuffix": "R",
"NonProprietaryName": "Human Insulin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20190906",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA019938",
"LabelerName": "Novo Nordisk",
"SubstanceName": "INSULIN HUMAN",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin [CS], Insulin [EPC]",
"Status": "Active",
"LastUpdate": "2022-12-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190906",
"SamplePackage": "N",
"IndicationAndUsage": "NOVOLIN R is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.",
"Description": "Insulin human is a short-acting human insulin produced by recombinant DNA technology, utilizing Saccharomyces cerevisiae (baker’s yeast) as the production organism and has the empirical formula C257H383N65O77S6 with a molecular weight of 5808 Da. Figure 1: Structural formula of NOVOLIN R. NOVOLIN R (insulin human) injection is a sterile, clear and colorless solution for subcutaneous or intravenous use. Each mililiter of NOVOLIN R contains 100 units of insulin human, and glycerin (16 mg), metacresol (3 mg), zinc (approximately 21 mcg/mL) and Water for Injection. Hydrochloric acid 2N and sodium hydroxide 2N may be added during manufacture to adjust pH. The pH is 7.0 to 7.8."
},
{
"NDCCode": "0169-3003-25",
"PackageDescription": "5 SYRINGE, PLASTIC in 1 CARTON (0169-3003-25) > 3 mL in 1 SYRINGE, PLASTIC (0169-3003-12) ",
"NDC11Code": "00169-3003-25",
"ProductNDC": "0169-3003",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Novolin",
"ProprietaryNameSuffix": "R",
"NonProprietaryName": "Human Insulin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20190906",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA019938",
"LabelerName": "Novo Nordisk",
"SubstanceName": "INSULIN HUMAN",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin [CS], Insulin [EPC]",
"Status": "Active",
"LastUpdate": "2022-12-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190906",
"SamplePackage": "N",
"IndicationAndUsage": "NOVOLIN R is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.",
"Description": "Insulin human is a short-acting human insulin produced by recombinant DNA technology, utilizing Saccharomyces cerevisiae (baker’s yeast) as the production organism and has the empirical formula C257H383N65O77S6 with a molecular weight of 5808 Da. Figure 1: Structural formula of NOVOLIN R. NOVOLIN R (insulin human) injection is a sterile, clear and colorless solution for subcutaneous or intravenous use. Each mililiter of NOVOLIN R contains 100 units of insulin human, and glycerin (16 mg), metacresol (3 mg), zinc (approximately 21 mcg/mL) and Water for Injection. Hydrochloric acid 2N and sodium hydroxide 2N may be added during manufacture to adjust pH. The pH is 7.0 to 7.8."
},
{
"NDCCode": "0169-3004-15",
"PackageDescription": "5 SYRINGE, PLASTIC in 1 CARTON (0169-3004-15) / 3 mL in 1 SYRINGE, PLASTIC (0169-3004-01) ",
"NDC11Code": "00169-3004-15",
"ProductNDC": "0169-3004",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Novolin",
"ProprietaryNameSuffix": "N",
"NonProprietaryName": "Human Insulin",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20190906",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA019959",
"LabelerName": "Novo Nordisk Pharmaceutical Industries, LP",
"SubstanceName": "INSULIN HUMAN",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin [CS], Insulin [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190906",
"SamplePackage": "N",
"IndicationAndUsage": "NOVOLIN N is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.",
"Description": "Insulin isophane human is produced by recombinant DNA technology, utilizing Saccharomyces cerevisiae (baker’s yeast) as the production organism. Insulin isophane human is a suspension of crystals produced from combining human insulin and protamine sulfate under appropriate conditions for crystal formation. The amino acid sequence of insulin isophane human is identical to human insulin and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 Da. Figure 1: Structural formula of human insulin. NOVOLIN N (insulin isophane human) injectable suspension is an intermediate acting human insulin. It is a sterile, white and cloudy suspension that contains insulin isophane human suspension (NPH) for subcutaneous use. Each milliliter of Novolin N contains 100 units of insulin human, dibasic sodium phosphate (1.9 mg), glycerin (16 mg), metacresol (1.5 mg), phenol (0.65 mg), protamine sulfate (approximately 0.35 mg), zinc (33.5 mcg for the vial or 33.2 mcg for the FlexPen), and Water for Injection. Hydrochloric acid 2N and sodium hydroxide 2N may be added to adjust the pH. The pH is 7.1 to 7.5."
},
{
"NDCCode": "0169-3004-25",
"PackageDescription": "5 SYRINGE, PLASTIC in 1 CARTON (0169-3004-25) / 3 mL in 1 SYRINGE, PLASTIC (0169-3004-12) ",
"NDC11Code": "00169-3004-25",
"ProductNDC": "0169-3004",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Novolin",
"ProprietaryNameSuffix": "N",
"NonProprietaryName": "Human Insulin",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20190906",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA019959",
"LabelerName": "Novo Nordisk Pharmaceutical Industries, LP",
"SubstanceName": "INSULIN HUMAN",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin [CS], Insulin [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190906",
"SamplePackage": "N",
"IndicationAndUsage": "NOVOLIN N is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.",
"Description": "Insulin isophane human is produced by recombinant DNA technology, utilizing Saccharomyces cerevisiae (baker’s yeast) as the production organism. Insulin isophane human is a suspension of crystals produced from combining human insulin and protamine sulfate under appropriate conditions for crystal formation. The amino acid sequence of insulin isophane human is identical to human insulin and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 Da. Figure 1: Structural formula of human insulin. NOVOLIN N (insulin isophane human) injectable suspension is an intermediate acting human insulin. It is a sterile, white and cloudy suspension that contains insulin isophane human suspension (NPH) for subcutaneous use. Each milliliter of Novolin N contains 100 units of insulin human, dibasic sodium phosphate (1.9 mg), glycerin (16 mg), metacresol (1.5 mg), phenol (0.65 mg), protamine sulfate (approximately 0.35 mg), zinc (33.5 mcg for the vial or 33.2 mcg for the FlexPen), and Water for Injection. Hydrochloric acid 2N and sodium hydroxide 2N may be added to adjust the pH. The pH is 7.1 to 7.5."
},
{
"NDCCode": "0169-3007-15",
"PackageDescription": "5 SYRINGE, PLASTIC in 1 CARTON (0169-3007-15) / 3 mL in 1 SYRINGE, PLASTIC (0169-3007-01) ",
"NDC11Code": "00169-3007-15",
"ProductNDC": "0169-3007",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Novolin",
"ProprietaryNameSuffix": "70/30",
"NonProprietaryName": "Human Insulin",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20180601",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA019991",
"LabelerName": "Novo Nordisk Pharmaceutical Industries, LP",
"SubstanceName": "INSULIN HUMAN",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin [CS], Insulin [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180601",
"SamplePackage": "N",
"IndicationAndUsage": "NOVOLIN 70/30 is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus. Limitations of Use. In NOVOLIN 70/30, the proportions of short-acting and intermediate-acting insulins are fixed and do not allow for basal versus prandial dose adjustments.",
"Description": "Insulin human is produced by recombinant DNA technology, utilizing Saccharomyces cerevisiae (baker’s yeast) as the production organism. The amino acid sequence of insulin human is identical to human insulin and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 Da. NOVOLIN 70/30 (insulin isophane human and insulin human) injectable suspension is a mixture of 70% of insulin isophane human, an intermediate-acting insulin, and 30% of insulin human, a short-acting insulin. NOVOLIN 70/30 is a suspension of crystals produced from combining insulin human and protamine sulfate under appropriate conditions for crystal formation and mixing with insulin human injection. Figure 1: Structural formula of human insulin. NOVOLIN 70/30 is a sterile, white and cloudy injectable suspension that contains insulin isophane human suspension (NPH) and insulin human injection (regular) for subcutaneous use. Each milliliter of NOVOLIN 70/30 contains 100 units of insulin human, dibasic sodium phosphate (1.9 mg), glycerin (16 mg), metacresol (1.5 mg), phenol (0.65 mg), protamine sulfate (approximately 0.25 mg), zinc (20.5 mcg/mL for the vial or 30.1 mcg for the FlexPen), and Water for Injection. Hydrochloric acid 2N and sodium hydroxide 2N may be added during manufacture to adjust the pH. The pH is 7.1-7.5."
},
{
"NDCCode": "0169-3007-25",
"PackageDescription": "5 SYRINGE, PLASTIC in 1 CARTON (0169-3007-25) / 3 mL in 1 SYRINGE, PLASTIC (0169-3007-12) ",
"NDC11Code": "00169-3007-25",
"ProductNDC": "0169-3007",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Novolin",
"ProprietaryNameSuffix": "70/30",
"NonProprietaryName": "Human Insulin",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20180601",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA019991",
"LabelerName": "Novo Nordisk Pharmaceutical Industries, LP",
"SubstanceName": "INSULIN HUMAN",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin [CS], Insulin [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180601",
"SamplePackage": "N",
"IndicationAndUsage": "NOVOLIN 70/30 is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus. Limitations of Use. In NOVOLIN 70/30, the proportions of short-acting and intermediate-acting insulins are fixed and do not allow for basal versus prandial dose adjustments.",
"Description": "Insulin human is produced by recombinant DNA technology, utilizing Saccharomyces cerevisiae (baker’s yeast) as the production organism. The amino acid sequence of insulin human is identical to human insulin and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 Da. NOVOLIN 70/30 (insulin isophane human and insulin human) injectable suspension is a mixture of 70% of insulin isophane human, an intermediate-acting insulin, and 30% of insulin human, a short-acting insulin. NOVOLIN 70/30 is a suspension of crystals produced from combining insulin human and protamine sulfate under appropriate conditions for crystal formation and mixing with insulin human injection. Figure 1: Structural formula of human insulin. NOVOLIN 70/30 is a sterile, white and cloudy injectable suspension that contains insulin isophane human suspension (NPH) and insulin human injection (regular) for subcutaneous use. Each milliliter of NOVOLIN 70/30 contains 100 units of insulin human, dibasic sodium phosphate (1.9 mg), glycerin (16 mg), metacresol (1.5 mg), phenol (0.65 mg), protamine sulfate (approximately 0.25 mg), zinc (20.5 mcg/mL for the vial or 30.1 mcg for the FlexPen), and Water for Injection. Hydrochloric acid 2N and sodium hydroxide 2N may be added during manufacture to adjust the pH. The pH is 7.1-7.5."
},
{
"NDCCode": "0169-3121-13",
"PackageDescription": "1 SYRINGE in 1 CARTON (0169-3121-13) / 3 mL in 1 SYRINGE (0169-3121-01) ",
"NDC11Code": "00169-3121-13",
"ProductNDC": "0169-3121",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Awiqli",
"NonProprietaryName": "Insulin Icodec-abae",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20260326",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761326",
"LabelerName": "Novo Nordisk",
"SubstanceName": "INSULIN ICODEC",
"StrengthNumber": "700",
"StrengthUnit": "U/mL",
"Status": "Deprecated",
"LastUpdate": "2026-08-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260326",
"SamplePackage": "N",
"IndicationAndUsage": "Awiqli is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Insulin icodec-abae is a once-weekly basal human insulin analog for subcutaneous injection produced by a process that includes expression of recombinant DNA in Saccharomyces cerevisiae followed by chemical modification. Insulin icodec-abae differs from human insulin in that the amino acid threonine in position B30 has been omitted, Tyr(A14) has been substituted with Glu and Tyr(B16) and Phe(B25) have been substituted with His. The side chain is connected to the peptide backbone via the amino group in the side chain at Lys(B29). Insulin icodec-abae has a molecular formula of C280H435N71O87S6 and a molecular weight of 6380.26 Da. It has the following structure. Figure 1: Structural Formula of Insulin icodec-abae. Awiqli (insulin icodec-abae) injection is a sterile, clear and colorless solution available as 700 units/mL (U-700) for subcutaneous use. Each mL contains 700 units of insulin icodec-abae and glycerin (15 mg), metacresol (1.08 mg), phenol (5.65 mg), sodium chloride (1.17 mg), zinc acetate (101 mcg), and Water for Injection. Awiqli has a pH of approximately 7.4. Hydrochloric acid or sodium hydroxide may be added to adjust pH."
},
{
"NDCCode": "0169-3204-15",
"PackageDescription": "5 SYRINGE, PLASTIC in 1 CARTON (0169-3204-15) / 3 mL in 1 SYRINGE, PLASTIC",
"NDC11Code": "00169-3204-15",
"ProductNDC": "0169-3204",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fiasp",
"NonProprietaryName": "Insulin Aspart Injection",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20171020",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA208751",
"LabelerName": "Novo Nordisk",
"SubstanceName": "INSULIN ASPART",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [CS]",
"Status": "Active",
"LastUpdate": "2023-07-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20171020",
"SamplePackage": "N",
"IndicationAndUsage": "FIASP is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin aspart is a rapid-acting insulin analog for subcutaneous or intravenous administration. Insulin aspart is homologous with regular human insulin with the exception of a single substitution of the amino acid proline by aspartic acid in position B28, and is produced by recombinant DNA technology utilizing Saccharomyces cerevisiae. Insulin aspart has the empirical formula C256H381N65079S6 and a molecular weight of 5825.8 daltons. FIASP (insulin aspart) injection is an aqueous, sterile, clear and colorless solution. Each mL contains 100 units of insulin aspart and the inactive ingredients: arginine (as L-arginine hydrochloride), USP (3.48 mg); dibasic sodium phosphate, USP (0.42 mg); glycerin, USP (3.3 mg); metacresol, USP (1.72 mg); niacinamide, USP (20.8 mg); phenol, USP (1.50 mg); zinc (as zinc acetate), USP (19.6 mcg) and Water for Injection. Hydrochloric acid and/or sodium hydroxide may be added to adjust pH to 7.1."
},
{
"NDCCode": "0169-3204-97",
"PackageDescription": "1 SYRINGE, PLASTIC in 1 CARTON (0169-3204-97) / 3 mL in 1 SYRINGE, PLASTIC (0169-3204-90) ",
"NDC11Code": "00169-3204-97",
"ProductNDC": "0169-3204",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fiasp",
"NonProprietaryName": "Insulin Aspart Injection",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20171020",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA208751",
"LabelerName": "Novo Nordisk",
"SubstanceName": "INSULIN ASPART",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [CS]",
"Status": "Active",
"LastUpdate": "2023-07-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20171020",
"SamplePackage": "Y",
"IndicationAndUsage": "FIASP is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin aspart is a rapid-acting insulin analog for subcutaneous or intravenous administration. Insulin aspart is homologous with regular human insulin with the exception of a single substitution of the amino acid proline by aspartic acid in position B28, and is produced by recombinant DNA technology utilizing Saccharomyces cerevisiae. Insulin aspart has the empirical formula C256H381N65079S6 and a molecular weight of 5825.8 daltons. FIASP (insulin aspart) injection is an aqueous, sterile, clear and colorless solution. Each mL contains 100 units of insulin aspart and the inactive ingredients: arginine (as L-arginine hydrochloride), USP (3.48 mg); dibasic sodium phosphate, USP (0.42 mg); glycerin, USP (3.3 mg); metacresol, USP (1.72 mg); niacinamide, USP (20.8 mg); phenol, USP (1.50 mg); zinc (as zinc acetate), USP (19.6 mcg) and Water for Injection. Hydrochloric acid and/or sodium hydroxide may be added to adjust pH to 7.1."
},
{
"NDCCode": "0169-3205-15",
"PackageDescription": "5 CARTRIDGE in 1 CARTON (0169-3205-15) / 3 mL in 1 CARTRIDGE (0169-3205-11) ",
"NDC11Code": "00169-3205-15",
"ProductNDC": "0169-3205",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fiasp",
"NonProprietaryName": "Insulin Aspart Injection",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20171020",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA208751",
"LabelerName": "Novo Nordisk",
"SubstanceName": "INSULIN ASPART",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [CS]",
"Status": "Active",
"LastUpdate": "2023-07-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191001",
"SamplePackage": "N",
"IndicationAndUsage": "FIASP is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin aspart is a rapid-acting insulin analog for subcutaneous or intravenous administration. Insulin aspart is homologous with regular human insulin with the exception of a single substitution of the amino acid proline by aspartic acid in position B28, and is produced by recombinant DNA technology utilizing Saccharomyces cerevisiae. Insulin aspart has the empirical formula C256H381N65079S6 and a molecular weight of 5825.8 daltons. FIASP (insulin aspart) injection is an aqueous, sterile, clear and colorless solution. Each mL contains 100 units of insulin aspart and the inactive ingredients: arginine (as L-arginine hydrochloride), USP (3.48 mg); dibasic sodium phosphate, USP (0.42 mg); glycerin, USP (3.3 mg); metacresol, USP (1.72 mg); niacinamide, USP (20.8 mg); phenol, USP (1.50 mg); zinc (as zinc acetate), USP (19.6 mcg) and Water for Injection. Hydrochloric acid and/or sodium hydroxide may be added to adjust pH to 7.1."
},
{
"NDCCode": "0169-3205-95",
"PackageDescription": "5 CARTRIDGE in 1 CARTON (0169-3205-95) / 3 mL in 1 CARTRIDGE (0169-3205-91) ",
"NDC11Code": "00169-3205-95",
"ProductNDC": "0169-3205",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fiasp",
"NonProprietaryName": "Insulin Aspart Injection",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20171020",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA208751",
"LabelerName": "Novo Nordisk",
"SubstanceName": "INSULIN ASPART",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [CS]",
"Status": "Active",
"LastUpdate": "2023-07-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191001",
"SamplePackage": "Y",
"IndicationAndUsage": "FIASP is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin aspart is a rapid-acting insulin analog for subcutaneous or intravenous administration. Insulin aspart is homologous with regular human insulin with the exception of a single substitution of the amino acid proline by aspartic acid in position B28, and is produced by recombinant DNA technology utilizing Saccharomyces cerevisiae. Insulin aspart has the empirical formula C256H381N65079S6 and a molecular weight of 5825.8 daltons. FIASP (insulin aspart) injection is an aqueous, sterile, clear and colorless solution. Each mL contains 100 units of insulin aspart and the inactive ingredients: arginine (as L-arginine hydrochloride), USP (3.48 mg); dibasic sodium phosphate, USP (0.42 mg); glycerin, USP (3.3 mg); metacresol, USP (1.72 mg); niacinamide, USP (20.8 mg); phenol, USP (1.50 mg); zinc (as zinc acetate), USP (19.6 mcg) and Water for Injection. Hydrochloric acid and/or sodium hydroxide may be added to adjust pH to 7.1."
},
{
"NDCCode": "0169-3303-12",
"PackageDescription": "5 CARTRIDGE in 1 CARTON (0169-3303-12) / 3 mL in 1 CARTRIDGE",
"NDC11Code": "00169-3303-12",
"ProductNDC": "0169-3303",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Novolog",
"NonProprietaryName": "Insulin Aspart",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20010827",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020986",
"LabelerName": "Novo Nordisk",
"SubstanceName": "INSULIN ASPART",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [CS]",
"Status": "Active",
"LastUpdate": "2025-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20010827",
"SamplePackage": "N",
"IndicationAndUsage": "NOVOLOG is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.",
"Description": "Insulin aspart is a rapid-acting human insulin analog homologous with regular human insulin with the exception of a single substitution of the amino acid proline by aspartic acid in position B28, and is produced by recombinant DNA technology utilizing Saccharomyces cerevisiae (baker's yeast). Insulin aspart has the empirical formula C256H381N65079S6 and a molecular weight of 5825.8 Da. NOVOLOG (insulin aspart) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL contains 100 units of insulin aspart and the inactive ingredients: disodium hydrogen phosphate dihydrate (1.25 mg), glycerin (16.0 mg), metacresol (1.72 mg), phenol (1.50 mg), sodium chloride (0.58 mg), zinc (19.6 mcg), and Water for Injection, USP. NOVOLOG has a pH of 7.2-7.6. Hydrochloric acid 10% and/or sodium hydroxide 10% may be added to adjust pH."
},
{
"NDCCode": "0169-3303-90",
"PackageDescription": "5 CARTRIDGE in 1 CARTON (0169-3303-90) / 3 mL in 1 CARTRIDGE",
"NDC11Code": "00169-3303-90",
"ProductNDC": "0169-3303",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Novolog",
"NonProprietaryName": "Insulin Aspart",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20010827",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020986",
"LabelerName": "Novo Nordisk",
"SubstanceName": "INSULIN ASPART",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [CS]",
"Status": "Active",
"LastUpdate": "2025-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20010827",
"SamplePackage": "Y",
"IndicationAndUsage": "NOVOLOG is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.",
"Description": "Insulin aspart is a rapid-acting human insulin analog homologous with regular human insulin with the exception of a single substitution of the amino acid proline by aspartic acid in position B28, and is produced by recombinant DNA technology utilizing Saccharomyces cerevisiae (baker's yeast). Insulin aspart has the empirical formula C256H381N65079S6 and a molecular weight of 5825.8 Da. NOVOLOG (insulin aspart) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL contains 100 units of insulin aspart and the inactive ingredients: disodium hydrogen phosphate dihydrate (1.25 mg), glycerin (16.0 mg), metacresol (1.72 mg), phenol (1.50 mg), sodium chloride (0.58 mg), zinc (19.6 mcg), and Water for Injection, USP. NOVOLOG has a pH of 7.2-7.6. Hydrochloric acid 10% and/or sodium hydroxide 10% may be added to adjust pH."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>80425-0169-3</NDCCode>
<PackageDescription>4 CAPSULE, DELAYED RELEASE in 1 BOTTLE (80425-0169-3) </PackageDescription>
<NDC11Code>80425-0169-03</NDC11Code>
<ProductNDC>80425-0169</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omeprazole</ProprietaryName>
<ProprietaryNameSuffix>Dr</ProprietaryNameSuffix>
<NonProprietaryName>Omeprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141031</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091672</ApplicationNumber>
<LabelerName>Advanced Rx Pharmacy of Tennessee, LLC</LabelerName>
<SubstanceName>OMEPRAZOLE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>INDICATIONS AND USAGE. 1.1 Treatment of Active Duodenal Ulcer. Omeprazole delayed-release capsules are indicated for short-term treatment of active duodenal ulcer in adults. Most patients heal within four weeks. Some patients may require an additional four weeks of therapy. 1.2 Helicobacter pylori Eradication to Reduce the Risk of Duodenal Ulcer Recurrence. Eradication of H. pylori has been shown to reduce the risk of duodenal ulcer recurrence. Triple Therapy. Omeprazole delayed-release capsules in combination with clarithromycin and amoxicillin, is indicated for treatment of patients with H. pylori infection and duodenal ulcer disease (active or up to 1-year history) to eradicate H. pylori in adults. Dual Therapy. Omeprazole delayed-release capsules in combination with clarithromycin are indicated for treatment of patients with H. pylori infection and duodenal ulcer disease to eradicate H. pylori in adults. Among patients who fail therapy, omeprazole delayed-release capsules with clarithromycin is more likely to be associated with the development of clarithromycin resistance as compared with triple therapy. In patients who fail therapy, susceptibility testing should be done. If resistance to clarithromycin is demonstrated or susceptibility testing is not possible, alternative antimicrobial therapy should be instituted [see Clinical Pharmacology (12.4) and the clarithromycin prescribing information, Microbiology section]. 1.3 Treatment of Active Benign Gastric Ulcer. Omeprazole delayed-release capsules are indicated for short-term treatment (4 to 8 weeks) of active benign gastric ulcer in adults. 1.4 Treatment of Symptomatic Gastroesophageal Reflux Disease (GERD). Omeprazole delayed-release capsules are indicated for the treatment of heartburn and other symptoms associated with GERD for up to 4 weeks in patients 2 years of age and older. 1.5 Treatment of Erosive Esophagitis (EE) Due to Acid-Mediated GERD. Pediatric Patients 2 Years of Age to Adults. Omeprazole delayed-release capsules are indicated for the short-term treatment (4 to 8 weeks) of EE due to acid-mediated GERD that has been diagnosed by endoscopy in patients 2 years of age and older. The efficacy of omeprazole delayed-release capsules used for longer than 8 weeks in patients with EE has not been established. If a patient does not respond to 8 weeks of treatment, an additional 4 weeks of treatment may be given. If there is recurrence of EE or GERD symptoms (e.g., heartburn), additional 4 to 8 week courses of omeprazole delayed-release capsules may be considered. 1.6 Maintenance of Healing of EE Due to Acid-Mediated GERD. Omeprazole delayed-release capsules are indicated for the maintenance healing of EE due to acid-mediated GERD in patients 2 years of age and older. Controlled studies do not extend beyond 12 months. 1.7 Pathological Hypersecretory Conditions. Omeprazole delayed-release capsules are indicated for the long-term treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison syndrome, multiple endocrine adenomas and systemic mastocytosis) in adults.</IndicationAndUsage>
<Description>The active ingredient in Omeprazole Delayed-Release Capsules, USP is a substituted benzimidazole, 5-methoxy-2[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42 g/mol. The structural formula is. Omeprazole, USP is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole, USP is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg or 40 mg of omeprazole, USP in the form of enteric-coated granules with the following inactive ingredients: anhydrous lactose, cetyl alcohol, di-sodium hydrogen phosphate dihydrate, hypromellose, hypromellose phthalate, mannitol, simethicone emulsion 30%, sodium lauryl sulfate and sugar sphere. The capsule shell for Omeprazole Delayed-Release Capsules, USP 10 mg contains D&C Yellow No.10, FD&C Blue No.1, FD&C Red No. 40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for Omeprazole Delayed-Release Capsules, USP 20 mg contains FD&C Blue No.1, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for Omeprazole Delayed-Release Capsules, USP 40 mg contains D&C Yellow No.10, FD&C Blue No.1, FD&C Red No. 40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The imprinting ink has the following components: black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, strong ammonia solution and shellac.</Description>
</NDC>
<NDC>
<NDCCode>80425-0169-1</NDCCode>
<PackageDescription>30 CAPSULE, DELAYED RELEASE in 1 BOTTLE (80425-0169-1) </PackageDescription>
<NDC11Code>80425-0169-01</NDC11Code>
<ProductNDC>80425-0169</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omeprazole</ProprietaryName>
<ProprietaryNameSuffix>Dr</ProprietaryNameSuffix>
<NonProprietaryName>Omeprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141031</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091672</ApplicationNumber>
<LabelerName>Advanced Rx Pharmacy of Tennessee, LLC</LabelerName>
<SubstanceName>OMEPRAZOLE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>INDICATIONS AND USAGE. 1.1 Treatment of Active Duodenal Ulcer. Omeprazole delayed-release capsules are indicated for short-term treatment of active duodenal ulcer in adults. Most patients heal within four weeks. Some patients may require an additional four weeks of therapy. 1.2 Helicobacter pylori Eradication to Reduce the Risk of Duodenal Ulcer Recurrence. Eradication of H. pylori has been shown to reduce the risk of duodenal ulcer recurrence. Triple Therapy. Omeprazole delayed-release capsules in combination with clarithromycin and amoxicillin, is indicated for treatment of patients with H. pylori infection and duodenal ulcer disease (active or up to 1-year history) to eradicate H. pylori in adults. Dual Therapy. Omeprazole delayed-release capsules in combination with clarithromycin are indicated for treatment of patients with H. pylori infection and duodenal ulcer disease to eradicate H. pylori in adults. Among patients who fail therapy, omeprazole delayed-release capsules with clarithromycin is more likely to be associated with the development of clarithromycin resistance as compared with triple therapy. In patients who fail therapy, susceptibility testing should be done. If resistance to clarithromycin is demonstrated or susceptibility testing is not possible, alternative antimicrobial therapy should be instituted [see Clinical Pharmacology (12.4) and the clarithromycin prescribing information, Microbiology section]. 1.3 Treatment of Active Benign Gastric Ulcer. Omeprazole delayed-release capsules are indicated for short-term treatment (4 to 8 weeks) of active benign gastric ulcer in adults. 1.4 Treatment of Symptomatic Gastroesophageal Reflux Disease (GERD). Omeprazole delayed-release capsules are indicated for the treatment of heartburn and other symptoms associated with GERD for up to 4 weeks in patients 2 years of age and older. 1.5 Treatment of Erosive Esophagitis (EE) Due to Acid-Mediated GERD. Pediatric Patients 2 Years of Age to Adults. Omeprazole delayed-release capsules are indicated for the short-term treatment (4 to 8 weeks) of EE due to acid-mediated GERD that has been diagnosed by endoscopy in patients 2 years of age and older. The efficacy of omeprazole delayed-release capsules used for longer than 8 weeks in patients with EE has not been established. If a patient does not respond to 8 weeks of treatment, an additional 4 weeks of treatment may be given. If there is recurrence of EE or GERD symptoms (e.g., heartburn), additional 4 to 8 week courses of omeprazole delayed-release capsules may be considered. 1.6 Maintenance of Healing of EE Due to Acid-Mediated GERD. Omeprazole delayed-release capsules are indicated for the maintenance healing of EE due to acid-mediated GERD in patients 2 years of age and older. Controlled studies do not extend beyond 12 months. 1.7 Pathological Hypersecretory Conditions. Omeprazole delayed-release capsules are indicated for the long-term treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison syndrome, multiple endocrine adenomas and systemic mastocytosis) in adults.</IndicationAndUsage>
<Description>The active ingredient in Omeprazole Delayed-Release Capsules, USP is a substituted benzimidazole, 5-methoxy-2[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42 g/mol. The structural formula is. Omeprazole, USP is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole, USP is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg or 40 mg of omeprazole, USP in the form of enteric-coated granules with the following inactive ingredients: anhydrous lactose, cetyl alcohol, di-sodium hydrogen phosphate dihydrate, hypromellose, hypromellose phthalate, mannitol, simethicone emulsion 30%, sodium lauryl sulfate and sugar sphere. The capsule shell for Omeprazole Delayed-Release Capsules, USP 10 mg contains D&C Yellow No.10, FD&C Blue No.1, FD&C Red No. 40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for Omeprazole Delayed-Release Capsules, USP 20 mg contains FD&C Blue No.1, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for Omeprazole Delayed-Release Capsules, USP 40 mg contains D&C Yellow No.10, FD&C Blue No.1, FD&C Red No. 40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The imprinting ink has the following components: black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, strong ammonia solution and shellac.</Description>
</NDC>
<NDC>
<NDCCode>80425-0169-2</NDCCode>
<PackageDescription>60 CAPSULE, DELAYED RELEASE in 1 BOTTLE (80425-0169-2) </PackageDescription>
<NDC11Code>80425-0169-02</NDC11Code>
<ProductNDC>80425-0169</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omeprazole</ProprietaryName>
<ProprietaryNameSuffix>Dr</ProprietaryNameSuffix>
<NonProprietaryName>Omeprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141031</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091672</ApplicationNumber>
<LabelerName>Advanced Rx Pharmacy of Tennessee, LLC</LabelerName>
<SubstanceName>OMEPRAZOLE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>INDICATIONS AND USAGE. 1.1 Treatment of Active Duodenal Ulcer. Omeprazole delayed-release capsules are indicated for short-term treatment of active duodenal ulcer in adults. Most patients heal within four weeks. Some patients may require an additional four weeks of therapy. 1.2 Helicobacter pylori Eradication to Reduce the Risk of Duodenal Ulcer Recurrence. Eradication of H. pylori has been shown to reduce the risk of duodenal ulcer recurrence. Triple Therapy. Omeprazole delayed-release capsules in combination with clarithromycin and amoxicillin, is indicated for treatment of patients with H. pylori infection and duodenal ulcer disease (active or up to 1-year history) to eradicate H. pylori in adults. Dual Therapy. Omeprazole delayed-release capsules in combination with clarithromycin are indicated for treatment of patients with H. pylori infection and duodenal ulcer disease to eradicate H. pylori in adults. Among patients who fail therapy, omeprazole delayed-release capsules with clarithromycin is more likely to be associated with the development of clarithromycin resistance as compared with triple therapy. In patients who fail therapy, susceptibility testing should be done. If resistance to clarithromycin is demonstrated or susceptibility testing is not possible, alternative antimicrobial therapy should be instituted [see Clinical Pharmacology (12.4) and the clarithromycin prescribing information, Microbiology section]. 1.3 Treatment of Active Benign Gastric Ulcer. Omeprazole delayed-release capsules are indicated for short-term treatment (4 to 8 weeks) of active benign gastric ulcer in adults. 1.4 Treatment of Symptomatic Gastroesophageal Reflux Disease (GERD). Omeprazole delayed-release capsules are indicated for the treatment of heartburn and other symptoms associated with GERD for up to 4 weeks in patients 2 years of age and older. 1.5 Treatment of Erosive Esophagitis (EE) Due to Acid-Mediated GERD. Pediatric Patients 2 Years of Age to Adults. Omeprazole delayed-release capsules are indicated for the short-term treatment (4 to 8 weeks) of EE due to acid-mediated GERD that has been diagnosed by endoscopy in patients 2 years of age and older. The efficacy of omeprazole delayed-release capsules used for longer than 8 weeks in patients with EE has not been established. If a patient does not respond to 8 weeks of treatment, an additional 4 weeks of treatment may be given. If there is recurrence of EE or GERD symptoms (e.g., heartburn), additional 4 to 8 week courses of omeprazole delayed-release capsules may be considered. 1.6 Maintenance of Healing of EE Due to Acid-Mediated GERD. Omeprazole delayed-release capsules are indicated for the maintenance healing of EE due to acid-mediated GERD in patients 2 years of age and older. Controlled studies do not extend beyond 12 months. 1.7 Pathological Hypersecretory Conditions. Omeprazole delayed-release capsules are indicated for the long-term treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison syndrome, multiple endocrine adenomas and systemic mastocytosis) in adults.</IndicationAndUsage>
<Description>The active ingredient in Omeprazole Delayed-Release Capsules, USP is a substituted benzimidazole, 5-methoxy-2[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42 g/mol. The structural formula is. Omeprazole, USP is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole, USP is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg or 40 mg of omeprazole, USP in the form of enteric-coated granules with the following inactive ingredients: anhydrous lactose, cetyl alcohol, di-sodium hydrogen phosphate dihydrate, hypromellose, hypromellose phthalate, mannitol, simethicone emulsion 30%, sodium lauryl sulfate and sugar sphere. The capsule shell for Omeprazole Delayed-Release Capsules, USP 10 mg contains D&C Yellow No.10, FD&C Blue No.1, FD&C Red No. 40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for Omeprazole Delayed-Release Capsules, USP 20 mg contains FD&C Blue No.1, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for Omeprazole Delayed-Release Capsules, USP 40 mg contains D&C Yellow No.10, FD&C Blue No.1, FD&C Red No. 40, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate and titanium dioxide. The imprinting ink has the following components: black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, strong ammonia solution and shellac.</Description>
</NDC>
<NDC>
<NDCCode>0169-2081-03</NDCCode>
<PackageDescription>1 SYRINGE, PLASTIC in 1 CARTON (0169-2081-03) / 3 mL in 1 SYRINGE, PLASTIC</PackageDescription>
<NDC11Code>00169-2081-03</NDC11Code>
<ProductNDC>0169-2081</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alhemo</ProprietaryName>
<NonProprietaryName>Concizumab</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20250219</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761315</ApplicationNumber>
<LabelerName>Novo Nordisk</LabelerName>
<SubstanceName>CONCIZUMAB</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Tissue Factor Pathway Inhibitor Antagonist [EPC], Tissue Factor Pathway Inhibitor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250324</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Alhemo is indicated for routine prophylaxis to prevent or reduce the frequency of bleeding episodes in adult and pediatric patients 12 years of age and older with: 1 hemophilia A (congenital factor VIII deficiency) with or without FVIII inhibitors, 2 hemophilia B (congenital factor IX deficiency) with or without FIX inhibitors.</IndicationAndUsage>
<Description>Concizumab-mtci, is a humanized IgG4 monoclonal antibody produced by recombinant DNA technology in Chinese Hamster Ovary (CHO) cells with an approximate molecular weight of 149 kDa. Alhemo (concizumab-mtci) injection is a clear to slightly opalescent, and colorless to slightly yellow solution that may contain translucent to white particles. Alhemo is supplied as a single-patient-use prefilled pen for subcutaneous injection. Each 1 mL of Alhemo single-patient-use prefilled pen (60 mg/1.5 mL) contains 40 mg active ingredient concizumab-mtci. Each 1 mL of Alhemo single-patient-use prefilled pen (150 mg/1.5 mL) contains 100 mg active ingredient concizumab-mtci. Each 1 mL of Alhemo single-patient-use prefilled pen (300 mg/3 mL) contains 100 mg active ingredient concizumab-mtci. Each 1 mL of Alhemo single-patient-use prefilled pen contains the following excipients: arginine hydrochloride (5.27 mg), histidine (5.12 mg), phenol (3.5 mg), polysorbate 80 (0.25 mg), sodium chloride (1.46 mg), sucrose (51.3 mg), and water for injection. Hydrochloric acid and sodium hydroxide may be added to adjust the pH to 6.0.</Description>
</NDC>
<NDC>
<NDCCode>0169-2101-25</NDCCode>
<PackageDescription>5 SYRINGE, PLASTIC in 1 CARTON (0169-2101-25) / 3 mL in 1 SYRINGE, PLASTIC (0169-2101-12) </PackageDescription>
<NDC11Code>00169-2101-25</NDC11Code>
<ProductNDC>0169-2101</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Novolog</ProprietaryName>
<NonProprietaryName>Insulin Aspart</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20030122</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020986</ApplicationNumber>
<LabelerName>Novo Nordisk</LabelerName>
<SubstanceName>INSULIN ASPART</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210525</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NOVOLOG is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin aspart is a rapid-acting human insulin analog homologous with regular human insulin with the exception of a single substitution of the amino acid proline by aspartic acid in position B28, and is produced by recombinant DNA technology utilizing Saccharomyces cerevisiae (baker's yeast). Insulin aspart has the empirical formula C256H381N65079S6 and a molecular weight of 5825.8 Da. NOVOLOG (insulin aspart) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL contains 100 units of insulin aspart and the inactive ingredients: disodium hydrogen phosphate dihydrate (1.25 mg), glycerin (16.0 mg), metacresol (1.72 mg), phenol (1.50 mg), sodium chloride (0.58 mg), zinc (19.6 mcg), and Water for Injection, USP. NOVOLOG has a pH of 7.2-7.6. Hydrochloric acid 10% and/or sodium hydroxide 10% may be added to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>0169-2201-25</NDCCode>
<PackageDescription>5 SYRINGE in 1 CARTON (0169-2201-25) / 3 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00169-2201-25</NDC11Code>
<ProductNDC>0169-2201</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Novolog Mix 70/30</ProprietaryName>
<NonProprietaryName>Insulin Aspart</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20020911</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA021172</ApplicationNumber>
<LabelerName>Novo Nordisk Pharmaceutical Industries, LP</LabelerName>
<SubstanceName>INSULIN ASPART</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NOVOLOG MIX 70/30 is a mixture of insulin aspart protamine and insulin aspart indicated to improve glycemic control in adult patients with diabetes mellitus. Limitations of Use: 1 NOVOLOG MIX 70/30 is not recommended for the treatment of diabetic ketoacidosis., 2 The proportions of rapid-acting and long-acting insulins in NOVOLOG MIX 70/30 are fixed and do not allow for basal versus prandial dose adjustments.</IndicationAndUsage>
<Description>Insulin aspart protamine and insulin aspart is a human insulin analog containing 70% insulin aspart protamine crystals and 30% soluble insulin aspart. Insulin aspart is homologous with regular human insulin with the exception of a single substitution of the amino acid proline by aspartic acid in position B28, and is produced by recombinant DNA technology utilizing Saccharomyces cerevisiae (baker’s yeast). Insulin aspart has the empirical formula C256H381N65O79S6 and a molecular weight of 5825.8 Da. Figure 1. Structural formula of insulin aspart. NOVOLOG MIX 70/30 (insulin aspart protamine and insulin aspart) is a uniform, white and cloudy, sterile injectable suspension for subcutaneous use. Each mL contains 100 units of insulin aspart and the inactive ingredients: disodium hydrogen phosphate dihydrate (1.25 mg), glycerol (16.0 mg), metacresol (1.72 mg), phenol (1.50 mg), protamine sulfate (0.32 mg), sodium chloride (0.877 mg), zinc (19.6 mcg), and Water for Injection, USP. NOVOLOG MIX 70/30 has a pH of 7.20 - 7.44. Hydrochloric acid or sodium hydroxide may be added to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>0169-2550-13</NDCCode>
<PackageDescription>3 SYRINGE, PLASTIC in 1 CARTON (0169-2550-13) > 3 mL in 1 SYRINGE, PLASTIC</PackageDescription>
<NDC11Code>00169-2550-13</NDC11Code>
<ProductNDC>0169-2550</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tresiba</ProprietaryName>
<NonProprietaryName>Insulin Degludec</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20150925</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA203314</ApplicationNumber>
<LabelerName>Novo Nordisk</LabelerName>
<SubstanceName>INSULIN DEGLUDEC</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>U/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-07-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150925</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TRESIBA is indicated to improve glycemic control in patients 1 year of age and older with diabetes mellitus. Limitations of Use: 1 Not recommended for the treatment of diabetic ketoacidosis.</IndicationAndUsage>
<Description>Insulin degludec is a long-acting basal human insulin analog for subcutaneous injection produced by a process that includes expression of recombinant DNA in Saccharomyces cerevisiae followed by chemical modification. Insulin degludec differs from human insulin in that the amino acid threonine in position B30 has been omitted and a side-chain consisting of glutamic acid and a C16 fatty acid has been attached (chemical name: LysB29(Nε-hexadecandioyl-γ-Glu) des(B30) human insulin). Insulin degludec has a molecular formula of C274H411N65O81S6 and a molecular weight of 6.104 kDa. It has the following structure. Figure 1: Structural Formula of Insulin Degludec. TRESIBA (insulin degludec) injection is a sterile, aqueous, clear, and colorless solution available as 100 units/mL (U-100) or 200 units/mL (U-200) for subcutaneous use. For the 100 units/mL solution, each mL contains 100 units of insulin degludec and glycerin (19.6 mg), metacresol (1.72 mg), phenol (1.5 mg), zinc (32.7 mcg), and Water for Injection, USP. For the 200 units/mL solution, each mL contains 200 units of insulin degludec and glycerin (19.6 mg), metacresol (1.72 mg), phenol (1.5 mg), zinc (71.9 mcg), and Water for Injection, USP. TRESIBA has a pH of approximately 7.6. Hydrochloric acid or sodium hydroxide may be added to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>0169-2550-97</NDCCode>
<PackageDescription>1 SYRINGE, PLASTIC in 1 CARTON (0169-2550-97) > 3 mL in 1 SYRINGE, PLASTIC (0169-2550-90) </PackageDescription>
<NDC11Code>00169-2550-97</NDC11Code>
<ProductNDC>0169-2550</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tresiba</ProprietaryName>
<NonProprietaryName>Insulin Degludec</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20150925</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA203314</ApplicationNumber>
<LabelerName>Novo Nordisk</LabelerName>
<SubstanceName>INSULIN DEGLUDEC</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>U/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-07-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150925</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TRESIBA is indicated to improve glycemic control in patients 1 year of age and older with diabetes mellitus. Limitations of Use: 1 Not recommended for the treatment of diabetic ketoacidosis.</IndicationAndUsage>
<Description>Insulin degludec is a long-acting basal human insulin analog for subcutaneous injection produced by a process that includes expression of recombinant DNA in Saccharomyces cerevisiae followed by chemical modification. Insulin degludec differs from human insulin in that the amino acid threonine in position B30 has been omitted and a side-chain consisting of glutamic acid and a C16 fatty acid has been attached (chemical name: LysB29(Nε-hexadecandioyl-γ-Glu) des(B30) human insulin). Insulin degludec has a molecular formula of C274H411N65O81S6 and a molecular weight of 6.104 kDa. It has the following structure. Figure 1: Structural Formula of Insulin Degludec. TRESIBA (insulin degludec) injection is a sterile, aqueous, clear, and colorless solution available as 100 units/mL (U-100) or 200 units/mL (U-200) for subcutaneous use. For the 100 units/mL solution, each mL contains 100 units of insulin degludec and glycerin (19.6 mg), metacresol (1.72 mg), phenol (1.5 mg), zinc (32.7 mcg), and Water for Injection, USP. For the 200 units/mL solution, each mL contains 200 units of insulin degludec and glycerin (19.6 mg), metacresol (1.72 mg), phenol (1.5 mg), zinc (71.9 mcg), and Water for Injection, USP. TRESIBA has a pH of approximately 7.6. Hydrochloric acid or sodium hydroxide may be added to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>0169-2660-15</NDCCode>
<PackageDescription>5 SYRINGE, PLASTIC in 1 CARTON (0169-2660-15) > 3 mL in 1 SYRINGE, PLASTIC</PackageDescription>
<NDC11Code>00169-2660-15</NDC11Code>
<ProductNDC>0169-2660</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tresiba</ProprietaryName>
<NonProprietaryName>Insulin Degludec</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20150925</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA203314</ApplicationNumber>
<LabelerName>Novo Nordisk</LabelerName>
<SubstanceName>INSULIN DEGLUDEC</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>U/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-07-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150925</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TRESIBA is indicated to improve glycemic control in patients 1 year of age and older with diabetes mellitus. Limitations of Use: 1 Not recommended for the treatment of diabetic ketoacidosis.</IndicationAndUsage>
<Description>Insulin degludec is a long-acting basal human insulin analog for subcutaneous injection produced by a process that includes expression of recombinant DNA in Saccharomyces cerevisiae followed by chemical modification. Insulin degludec differs from human insulin in that the amino acid threonine in position B30 has been omitted and a side-chain consisting of glutamic acid and a C16 fatty acid has been attached (chemical name: LysB29(Nε-hexadecandioyl-γ-Glu) des(B30) human insulin). Insulin degludec has a molecular formula of C274H411N65O81S6 and a molecular weight of 6.104 kDa. It has the following structure. Figure 1: Structural Formula of Insulin Degludec. TRESIBA (insulin degludec) injection is a sterile, aqueous, clear, and colorless solution available as 100 units/mL (U-100) or 200 units/mL (U-200) for subcutaneous use. For the 100 units/mL solution, each mL contains 100 units of insulin degludec and glycerin (19.6 mg), metacresol (1.72 mg), phenol (1.5 mg), zinc (32.7 mcg), and Water for Injection, USP. For the 200 units/mL solution, each mL contains 200 units of insulin degludec and glycerin (19.6 mg), metacresol (1.72 mg), phenol (1.5 mg), zinc (71.9 mcg), and Water for Injection, USP. TRESIBA has a pH of approximately 7.6. Hydrochloric acid or sodium hydroxide may be added to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>0169-2660-97</NDCCode>
<PackageDescription>1 SYRINGE, PLASTIC in 1 CARTON (0169-2660-97) > 3 mL in 1 SYRINGE, PLASTIC (0169-2660-90) </PackageDescription>
<NDC11Code>00169-2660-97</NDC11Code>
<ProductNDC>0169-2660</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tresiba</ProprietaryName>
<NonProprietaryName>Insulin Degludec</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20150925</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA203314</ApplicationNumber>
<LabelerName>Novo Nordisk</LabelerName>
<SubstanceName>INSULIN DEGLUDEC</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>U/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-07-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150925</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TRESIBA is indicated to improve glycemic control in patients 1 year of age and older with diabetes mellitus. Limitations of Use: 1 Not recommended for the treatment of diabetic ketoacidosis.</IndicationAndUsage>
<Description>Insulin degludec is a long-acting basal human insulin analog for subcutaneous injection produced by a process that includes expression of recombinant DNA in Saccharomyces cerevisiae followed by chemical modification. Insulin degludec differs from human insulin in that the amino acid threonine in position B30 has been omitted and a side-chain consisting of glutamic acid and a C16 fatty acid has been attached (chemical name: LysB29(Nε-hexadecandioyl-γ-Glu) des(B30) human insulin). Insulin degludec has a molecular formula of C274H411N65O81S6 and a molecular weight of 6.104 kDa. It has the following structure. Figure 1: Structural Formula of Insulin Degludec. TRESIBA (insulin degludec) injection is a sterile, aqueous, clear, and colorless solution available as 100 units/mL (U-100) or 200 units/mL (U-200) for subcutaneous use. For the 100 units/mL solution, each mL contains 100 units of insulin degludec and glycerin (19.6 mg), metacresol (1.72 mg), phenol (1.5 mg), zinc (32.7 mcg), and Water for Injection, USP. For the 200 units/mL solution, each mL contains 200 units of insulin degludec and glycerin (19.6 mg), metacresol (1.72 mg), phenol (1.5 mg), zinc (71.9 mcg), and Water for Injection, USP. TRESIBA has a pH of approximately 7.6. Hydrochloric acid or sodium hydroxide may be added to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>0169-2770-15</NDCCode>
<PackageDescription>5 SYRINGE in 1 CARTON (0169-2770-15) > 3 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00169-2770-15</NDC11Code>
<ProductNDC>0169-2770</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ryzodeg 70/30</ProprietaryName>
<NonProprietaryName>Insulin Degludec And Insulin Aspart Injection</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20180101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA203313</ApplicationNumber>
<LabelerName>Novo Nordisk</LabelerName>
<SubstanceName>INSULIN DEGLUDEC; INSULIN ASPART</SubstanceName>
<StrengthNumber>70; 30</StrengthNumber>
<StrengthUnit>U/mL; U/mL</StrengthUnit>
<Pharm_Classes>Insulin [Chemical/Ingredient],Insulin Analog [EPC],Insulin [Chemical/Ingredient],Insulin Analog [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-01-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0169-2770-97</NDCCode>
<PackageDescription>1 SYRINGE in 1 CARTON (0169-2770-97) > 3 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00169-2770-97</NDC11Code>
<ProductNDC>0169-2770</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ryzodeg 70/30</ProprietaryName>
<NonProprietaryName>Insulin Degludec And Insulin Aspart Injection</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20180101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA203313</ApplicationNumber>
<LabelerName>Novo Nordisk</LabelerName>
<SubstanceName>INSULIN DEGLUDEC; INSULIN ASPART</SubstanceName>
<StrengthNumber>70; 30</StrengthNumber>
<StrengthUnit>U/mL; U/mL</StrengthUnit>
<Pharm_Classes>Insulin [Chemical/Ingredient],Insulin Analog [EPC],Insulin [Chemical/Ingredient],Insulin Analog [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-01-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0169-2800-15</NDCCode>
<PackageDescription>5 SYRINGE, PLASTIC in 1 CARTON (0169-2800-15) / 3 mL in 1 SYRINGE, PLASTIC</PackageDescription>
<NDC11Code>00169-2800-15</NDC11Code>
<ProductNDC>0169-2800</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Saxenda</ProprietaryName>
<NonProprietaryName>Liraglutide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20141231</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA206321</ApplicationNumber>
<LabelerName>Novo Nordisk Pharmaceutical Industries, LP</LabelerName>
<SubstanceName>LIRAGLUTIDE</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>GLP-1 Receptor Agonist [EPC], Glucagon-Like Peptide 1 [CS], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150119</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SAXENDA is indicated in combination with a reduced calorie diet and increased physical activity to reduce excess body weight and maintain weight reduction long term in: 1 Adults and pediatric patients aged 12 years and older with body weight greater than 60 kg and obesity., 2 Adults with overweight in the presence of at least one weight-related comorbid condition.</IndicationAndUsage>
<Description>SAXENDA contains liraglutide, an analog of human GLP-1 and acts as a GLP-1 receptor agonist. The peptide precursor of liraglutide, produced by a process that includes expression of recombinant DNA in Saccharomyces cerevisiae, has been engineered to be 97% homologous to native human GLP-1 by substituting arginine for lysine at position 34. Liraglutide is made by attaching a C-16 fatty acid (palmitic acid) with a glutamic acid spacer on the remaining lysine residue at position 26 of the peptide precursor. The molecular formula of liraglutide is C172H265N43O51 and the molecular weight is 3751.2 Daltons. The structural formula (Figure 1) is. Figure 1. Structural Formula of liraglutide. SAXENDA injection is a sterile, aqueous, clear, colorless or almost colorless solution for subcutaneous use. Each 1 mL of SAXENDA solution contains 6 mg of liraglutide and the following inactive ingredients: disodium phosphate dihydrate, 1.42 mg; propylene glycol, 14 mg; phenol, 5.5 mg; and water for injection. SAXENDA has a pH of approximately 8.15, hydrochloric acid or sodium hydroxide may be added to adjust pH. Each prefilled pen contains a 3 mL solution of SAXENDA equivalent to 18 mg liraglutide (free-base, anhydrous).</Description>
</NDC>
<NDC>
<NDCCode>0169-2800-90</NDCCode>
<PackageDescription>1 SYRINGE, PLASTIC in 1 CARTON (0169-2800-90) / 3 mL in 1 SYRINGE, PLASTIC</PackageDescription>
<NDC11Code>00169-2800-90</NDC11Code>
<ProductNDC>0169-2800</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Saxenda</ProprietaryName>
<NonProprietaryName>Liraglutide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20141231</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA206321</ApplicationNumber>
<LabelerName>Novo Nordisk Pharmaceutical Industries, LP</LabelerName>
<SubstanceName>LIRAGLUTIDE</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>GLP-1 Receptor Agonist [EPC], Glucagon-Like Peptide 1 [CS], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150119</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SAXENDA is indicated in combination with a reduced calorie diet and increased physical activity to reduce excess body weight and maintain weight reduction long term in: 1 Adults and pediatric patients aged 12 years and older with body weight greater than 60 kg and obesity., 2 Adults with overweight in the presence of at least one weight-related comorbid condition.</IndicationAndUsage>
<Description>SAXENDA contains liraglutide, an analog of human GLP-1 and acts as a GLP-1 receptor agonist. The peptide precursor of liraglutide, produced by a process that includes expression of recombinant DNA in Saccharomyces cerevisiae, has been engineered to be 97% homologous to native human GLP-1 by substituting arginine for lysine at position 34. Liraglutide is made by attaching a C-16 fatty acid (palmitic acid) with a glutamic acid spacer on the remaining lysine residue at position 26 of the peptide precursor. The molecular formula of liraglutide is C172H265N43O51 and the molecular weight is 3751.2 Daltons. The structural formula (Figure 1) is. Figure 1. Structural Formula of liraglutide. SAXENDA injection is a sterile, aqueous, clear, colorless or almost colorless solution for subcutaneous use. Each 1 mL of SAXENDA solution contains 6 mg of liraglutide and the following inactive ingredients: disodium phosphate dihydrate, 1.42 mg; propylene glycol, 14 mg; phenol, 5.5 mg; and water for injection. SAXENDA has a pH of approximately 8.15, hydrochloric acid or sodium hydroxide may be added to adjust pH. Each prefilled pen contains a 3 mL solution of SAXENDA equivalent to 18 mg liraglutide (free-base, anhydrous).</Description>
</NDC>
<NDC>
<NDCCode>0169-2800-97</NDCCode>
<PackageDescription>1 SYRINGE, PLASTIC in 1 CARTON (0169-2800-97) / 3 mL in 1 SYRINGE, PLASTIC</PackageDescription>
<NDC11Code>00169-2800-97</NDC11Code>
<ProductNDC>0169-2800</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Saxenda</ProprietaryName>
<NonProprietaryName>Liraglutide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20141231</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA206321</ApplicationNumber>
<LabelerName>Novo Nordisk Pharmaceutical Industries, LP</LabelerName>
<SubstanceName>LIRAGLUTIDE</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>GLP-1 Receptor Agonist [EPC], Glucagon-Like Peptide 1 [CS], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150119</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SAXENDA is indicated in combination with a reduced calorie diet and increased physical activity to reduce excess body weight and maintain weight reduction long term in: 1 Adults and pediatric patients aged 12 years and older with body weight greater than 60 kg and obesity., 2 Adults with overweight in the presence of at least one weight-related comorbid condition.</IndicationAndUsage>
<Description>SAXENDA contains liraglutide, an analog of human GLP-1 and acts as a GLP-1 receptor agonist. The peptide precursor of liraglutide, produced by a process that includes expression of recombinant DNA in Saccharomyces cerevisiae, has been engineered to be 97% homologous to native human GLP-1 by substituting arginine for lysine at position 34. Liraglutide is made by attaching a C-16 fatty acid (palmitic acid) with a glutamic acid spacer on the remaining lysine residue at position 26 of the peptide precursor. The molecular formula of liraglutide is C172H265N43O51 and the molecular weight is 3751.2 Daltons. The structural formula (Figure 1) is. Figure 1. Structural Formula of liraglutide. SAXENDA injection is a sterile, aqueous, clear, colorless or almost colorless solution for subcutaneous use. Each 1 mL of SAXENDA solution contains 6 mg of liraglutide and the following inactive ingredients: disodium phosphate dihydrate, 1.42 mg; propylene glycol, 14 mg; phenol, 5.5 mg; and water for injection. SAXENDA has a pH of approximately 8.15, hydrochloric acid or sodium hydroxide may be added to adjust pH. Each prefilled pen contains a 3 mL solution of SAXENDA equivalent to 18 mg liraglutide (free-base, anhydrous).</Description>
</NDC>
<NDC>
<NDCCode>0169-2911-15</NDCCode>
<PackageDescription>5 SYRINGE, PLASTIC in 1 CARTON (0169-2911-15) / 3 mL in 1 SYRINGE, PLASTIC</PackageDescription>
<NDC11Code>00169-2911-15</NDC11Code>
<ProductNDC>0169-2911</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Xultophy 100/3.6</ProprietaryName>
<NonProprietaryName>Insulin Degludec And Liraglutide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20161121</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA208583</ApplicationNumber>
<LabelerName>Novo Nordisk</LabelerName>
<SubstanceName>INSULIN DEGLUDEC; LIRAGLUTIDE</SubstanceName>
<StrengthNumber>100; 3.6</StrengthNumber>
<StrengthUnit>[iU]/mL; mg/mL</StrengthUnit>
<Pharm_Classes>GLP-1 Receptor Agonist [EPC], Glucagon-Like Peptide 1 [CS], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Insulin Analog [EPC], Insulin [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161121</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>XULTOPHY 100/3.6 is a combination of insulin degludec and liraglutide and is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. Limitations of Use: 1 XULTOPHY 100/3.6 contains liraglutide. Coadministration with any other product containing liraglutide or another glucagon-like peptide-1 (GLP-1) receptor agonist is not recommended [see Warnings and Precautions (5.5)]., 2 XULTOPHY 100/3.6 is not recommended for the treatment of diabetic ketoacidosis., 3 XULTOPHY 100/3.6 has not been studied in combination with prandial insulin.</IndicationAndUsage>
<Description>Insulin degludec. Insulin degludec is a long-acting basal human insulin analog. Insulin degludec is produced by a process that includes expression of recombinant DNA in Saccharomyces cerevisiae followed by chemical modification. Insulin degludec differs from human insulin in that the amino acid threonine in position B30 has been omitted and a side-chain consisting of glutamic acid and a C16 fatty acid has been attached (chemical name: LysB29(Nε-hexadecandioyl-γ-Glu) des(B30) human insulin). Insulin degludec has a molecular formula of C274H411N65O81S6 and a molecular weight of 6.104 kDa. It has the following structure. Figure 1. Structural Formula of Insulin degludec. Liraglutide. Liraglutide is an analog of human GLP-1 and acts as a GLP-1 receptor agonist. The peptide precursor of liraglutide, produced by a process that includes expression of recombinant DNA in Saccharomyces cerevisiae, has been engineered to be 97% homologous to native human GLP-1 by substituting arginine for lysine at position 34. Liraglutide is made by attaching a C16 fatty acid (palmitic acid) with a glutamic acid spacer on the remaining lysine residue at position 26 of the peptide precursor. The molecular formula of liraglutide is C172H265N43O51 and the molecular weight is 3.751 kDa. It has the following structure. Figure 2. Structural Formula of Liraglutide. XULTOPHY 100/3.6 (insulin degludec and liraglutide) injection, for subcutaneous use, is a combination of a long-acting basal human insulin analog, insulin degludec, and a GLP-1 receptor agonist, liraglutide. XULTOPHY 100/3.6 is a sterile, aqueous, clear, and colorless solution. Each prefilled pen contains 3 mL equivalent to 300 units insulin degludec and 10.8 mg liraglutide. Each mL contains 100 units insulin degludec and 3.6 mg liraglutide. XULTOPHY 100/3.6 contains the following inactive ingredients per mL: glycerol (19.7 mg), phenol (5.7 mg), zinc (55 mcg), and Water for Injection, USP. XULTOPHY 100/3.6 has a pH of approximately 8.15. Hydrochloric acid or sodium hydroxide may be added to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>0169-2911-97</NDCCode>
<PackageDescription>1 SYRINGE, PLASTIC in 1 CARTON (0169-2911-97) > 3 mL in 1 SYRINGE, PLASTIC (0169-2911-90) </PackageDescription>
<NDC11Code>00169-2911-97</NDC11Code>
<ProductNDC>0169-2911</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Xultophy 100/3.6</ProprietaryName>
<NonProprietaryName>(insulin Degludec And Liraglutide)</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20161121</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA208583</ApplicationNumber>
<LabelerName>Novo Nordisk</LabelerName>
<SubstanceName>INSULIN DEGLUDEC; LIRAGLUTIDE</SubstanceName>
<StrengthNumber>100; 3.6</StrengthNumber>
<StrengthUnit>[iU]/mL; mg/mL</StrengthUnit>
<Pharm_Classes>GLP-1 Receptor Agonist [EPC], Glucagon-Like Peptide 1 [CS], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Insulin Analog [EPC], Insulin [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-06-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161121</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0169-3003-15</NDCCode>
<PackageDescription>5 SYRINGE, PLASTIC in 1 CARTON (0169-3003-15) > 3 mL in 1 SYRINGE, PLASTIC (0169-3003-01) </PackageDescription>
<NDC11Code>00169-3003-15</NDC11Code>
<ProductNDC>0169-3003</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Novolin</ProprietaryName>
<ProprietaryNameSuffix>R</ProprietaryNameSuffix>
<NonProprietaryName>Human Insulin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190906</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA019938</ApplicationNumber>
<LabelerName>Novo Nordisk</LabelerName>
<SubstanceName>INSULIN HUMAN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin [CS], Insulin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190906</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NOVOLIN R is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin human is a short-acting human insulin produced by recombinant DNA technology, utilizing Saccharomyces cerevisiae (baker’s yeast) as the production organism and has the empirical formula C257H383N65O77S6 with a molecular weight of 5808 Da. Figure 1: Structural formula of NOVOLIN R. NOVOLIN R (insulin human) injection is a sterile, clear and colorless solution for subcutaneous or intravenous use. Each mililiter of NOVOLIN R contains 100 units of insulin human, and glycerin (16 mg), metacresol (3 mg), zinc (approximately 21 mcg/mL) and Water for Injection. Hydrochloric acid 2N and sodium hydroxide 2N may be added during manufacture to adjust pH. The pH is 7.0 to 7.8.</Description>
</NDC>
<NDC>
<NDCCode>0169-3003-25</NDCCode>
<PackageDescription>5 SYRINGE, PLASTIC in 1 CARTON (0169-3003-25) > 3 mL in 1 SYRINGE, PLASTIC (0169-3003-12) </PackageDescription>
<NDC11Code>00169-3003-25</NDC11Code>
<ProductNDC>0169-3003</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Novolin</ProprietaryName>
<ProprietaryNameSuffix>R</ProprietaryNameSuffix>
<NonProprietaryName>Human Insulin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190906</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA019938</ApplicationNumber>
<LabelerName>Novo Nordisk</LabelerName>
<SubstanceName>INSULIN HUMAN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin [CS], Insulin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190906</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NOVOLIN R is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin human is a short-acting human insulin produced by recombinant DNA technology, utilizing Saccharomyces cerevisiae (baker’s yeast) as the production organism and has the empirical formula C257H383N65O77S6 with a molecular weight of 5808 Da. Figure 1: Structural formula of NOVOLIN R. NOVOLIN R (insulin human) injection is a sterile, clear and colorless solution for subcutaneous or intravenous use. Each mililiter of NOVOLIN R contains 100 units of insulin human, and glycerin (16 mg), metacresol (3 mg), zinc (approximately 21 mcg/mL) and Water for Injection. Hydrochloric acid 2N and sodium hydroxide 2N may be added during manufacture to adjust pH. The pH is 7.0 to 7.8.</Description>
</NDC>
<NDC>
<NDCCode>0169-3004-15</NDCCode>
<PackageDescription>5 SYRINGE, PLASTIC in 1 CARTON (0169-3004-15) / 3 mL in 1 SYRINGE, PLASTIC (0169-3004-01) </PackageDescription>
<NDC11Code>00169-3004-15</NDC11Code>
<ProductNDC>0169-3004</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Novolin</ProprietaryName>
<ProprietaryNameSuffix>N</ProprietaryNameSuffix>
<NonProprietaryName>Human Insulin</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190906</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA019959</ApplicationNumber>
<LabelerName>Novo Nordisk Pharmaceutical Industries, LP</LabelerName>
<SubstanceName>INSULIN HUMAN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin [CS], Insulin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190906</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NOVOLIN N is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin isophane human is produced by recombinant DNA technology, utilizing Saccharomyces cerevisiae (baker’s yeast) as the production organism. Insulin isophane human is a suspension of crystals produced from combining human insulin and protamine sulfate under appropriate conditions for crystal formation. The amino acid sequence of insulin isophane human is identical to human insulin and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 Da. Figure 1: Structural formula of human insulin. NOVOLIN N (insulin isophane human) injectable suspension is an intermediate acting human insulin. It is a sterile, white and cloudy suspension that contains insulin isophane human suspension (NPH) for subcutaneous use. Each milliliter of Novolin N contains 100 units of insulin human, dibasic sodium phosphate (1.9 mg), glycerin (16 mg), metacresol (1.5 mg), phenol (0.65 mg), protamine sulfate (approximately 0.35 mg), zinc (33.5 mcg for the vial or 33.2 mcg for the FlexPen), and Water for Injection. Hydrochloric acid 2N and sodium hydroxide 2N may be added to adjust the pH. The pH is 7.1 to 7.5.</Description>
</NDC>
<NDC>
<NDCCode>0169-3004-25</NDCCode>
<PackageDescription>5 SYRINGE, PLASTIC in 1 CARTON (0169-3004-25) / 3 mL in 1 SYRINGE, PLASTIC (0169-3004-12) </PackageDescription>
<NDC11Code>00169-3004-25</NDC11Code>
<ProductNDC>0169-3004</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Novolin</ProprietaryName>
<ProprietaryNameSuffix>N</ProprietaryNameSuffix>
<NonProprietaryName>Human Insulin</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190906</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA019959</ApplicationNumber>
<LabelerName>Novo Nordisk Pharmaceutical Industries, LP</LabelerName>
<SubstanceName>INSULIN HUMAN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin [CS], Insulin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190906</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NOVOLIN N is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin isophane human is produced by recombinant DNA technology, utilizing Saccharomyces cerevisiae (baker’s yeast) as the production organism. Insulin isophane human is a suspension of crystals produced from combining human insulin and protamine sulfate under appropriate conditions for crystal formation. The amino acid sequence of insulin isophane human is identical to human insulin and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 Da. Figure 1: Structural formula of human insulin. NOVOLIN N (insulin isophane human) injectable suspension is an intermediate acting human insulin. It is a sterile, white and cloudy suspension that contains insulin isophane human suspension (NPH) for subcutaneous use. Each milliliter of Novolin N contains 100 units of insulin human, dibasic sodium phosphate (1.9 mg), glycerin (16 mg), metacresol (1.5 mg), phenol (0.65 mg), protamine sulfate (approximately 0.35 mg), zinc (33.5 mcg for the vial or 33.2 mcg for the FlexPen), and Water for Injection. Hydrochloric acid 2N and sodium hydroxide 2N may be added to adjust the pH. The pH is 7.1 to 7.5.</Description>
</NDC>
<NDC>
<NDCCode>0169-3007-15</NDCCode>
<PackageDescription>5 SYRINGE, PLASTIC in 1 CARTON (0169-3007-15) / 3 mL in 1 SYRINGE, PLASTIC (0169-3007-01) </PackageDescription>
<NDC11Code>00169-3007-15</NDC11Code>
<ProductNDC>0169-3007</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Novolin</ProprietaryName>
<ProprietaryNameSuffix>70/30</ProprietaryNameSuffix>
<NonProprietaryName>Human Insulin</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20180601</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA019991</ApplicationNumber>
<LabelerName>Novo Nordisk Pharmaceutical Industries, LP</LabelerName>
<SubstanceName>INSULIN HUMAN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin [CS], Insulin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NOVOLIN 70/30 is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus. Limitations of Use. In NOVOLIN 70/30, the proportions of short-acting and intermediate-acting insulins are fixed and do not allow for basal versus prandial dose adjustments.</IndicationAndUsage>
<Description>Insulin human is produced by recombinant DNA technology, utilizing Saccharomyces cerevisiae (baker’s yeast) as the production organism. The amino acid sequence of insulin human is identical to human insulin and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 Da. NOVOLIN 70/30 (insulin isophane human and insulin human) injectable suspension is a mixture of 70% of insulin isophane human, an intermediate-acting insulin, and 30% of insulin human, a short-acting insulin. NOVOLIN 70/30 is a suspension of crystals produced from combining insulin human and protamine sulfate under appropriate conditions for crystal formation and mixing with insulin human injection. Figure 1: Structural formula of human insulin. NOVOLIN 70/30 is a sterile, white and cloudy injectable suspension that contains insulin isophane human suspension (NPH) and insulin human injection (regular) for subcutaneous use. Each milliliter of NOVOLIN 70/30 contains 100 units of insulin human, dibasic sodium phosphate (1.9 mg), glycerin (16 mg), metacresol (1.5 mg), phenol (0.65 mg), protamine sulfate (approximately 0.25 mg), zinc (20.5 mcg/mL for the vial or 30.1 mcg for the FlexPen), and Water for Injection. Hydrochloric acid 2N and sodium hydroxide 2N may be added during manufacture to adjust the pH. The pH is 7.1-7.5.</Description>
</NDC>
<NDC>
<NDCCode>0169-3007-25</NDCCode>
<PackageDescription>5 SYRINGE, PLASTIC in 1 CARTON (0169-3007-25) / 3 mL in 1 SYRINGE, PLASTIC (0169-3007-12) </PackageDescription>
<NDC11Code>00169-3007-25</NDC11Code>
<ProductNDC>0169-3007</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Novolin</ProprietaryName>
<ProprietaryNameSuffix>70/30</ProprietaryNameSuffix>
<NonProprietaryName>Human Insulin</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20180601</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA019991</ApplicationNumber>
<LabelerName>Novo Nordisk Pharmaceutical Industries, LP</LabelerName>
<SubstanceName>INSULIN HUMAN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin [CS], Insulin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NOVOLIN 70/30 is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus. Limitations of Use. In NOVOLIN 70/30, the proportions of short-acting and intermediate-acting insulins are fixed and do not allow for basal versus prandial dose adjustments.</IndicationAndUsage>
<Description>Insulin human is produced by recombinant DNA technology, utilizing Saccharomyces cerevisiae (baker’s yeast) as the production organism. The amino acid sequence of insulin human is identical to human insulin and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 Da. NOVOLIN 70/30 (insulin isophane human and insulin human) injectable suspension is a mixture of 70% of insulin isophane human, an intermediate-acting insulin, and 30% of insulin human, a short-acting insulin. NOVOLIN 70/30 is a suspension of crystals produced from combining insulin human and protamine sulfate under appropriate conditions for crystal formation and mixing with insulin human injection. Figure 1: Structural formula of human insulin. NOVOLIN 70/30 is a sterile, white and cloudy injectable suspension that contains insulin isophane human suspension (NPH) and insulin human injection (regular) for subcutaneous use. Each milliliter of NOVOLIN 70/30 contains 100 units of insulin human, dibasic sodium phosphate (1.9 mg), glycerin (16 mg), metacresol (1.5 mg), phenol (0.65 mg), protamine sulfate (approximately 0.25 mg), zinc (20.5 mcg/mL for the vial or 30.1 mcg for the FlexPen), and Water for Injection. Hydrochloric acid 2N and sodium hydroxide 2N may be added during manufacture to adjust the pH. The pH is 7.1-7.5.</Description>
</NDC>
<NDC>
<NDCCode>0169-3121-13</NDCCode>
<PackageDescription>1 SYRINGE in 1 CARTON (0169-3121-13) / 3 mL in 1 SYRINGE (0169-3121-01) </PackageDescription>
<NDC11Code>00169-3121-13</NDC11Code>
<ProductNDC>0169-3121</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Awiqli</ProprietaryName>
<NonProprietaryName>Insulin Icodec-abae</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20260326</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761326</ApplicationNumber>
<LabelerName>Novo Nordisk</LabelerName>
<SubstanceName>INSULIN ICODEC</SubstanceName>
<StrengthNumber>700</StrengthNumber>
<StrengthUnit>U/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2026-08-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260326</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Awiqli is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Insulin icodec-abae is a once-weekly basal human insulin analog for subcutaneous injection produced by a process that includes expression of recombinant DNA in Saccharomyces cerevisiae followed by chemical modification. Insulin icodec-abae differs from human insulin in that the amino acid threonine in position B30 has been omitted, Tyr(A14) has been substituted with Glu and Tyr(B16) and Phe(B25) have been substituted with His. The side chain is connected to the peptide backbone via the amino group in the side chain at Lys(B29). Insulin icodec-abae has a molecular formula of C280H435N71O87S6 and a molecular weight of 6380.26 Da. It has the following structure. Figure 1: Structural Formula of Insulin icodec-abae. Awiqli (insulin icodec-abae) injection is a sterile, clear and colorless solution available as 700 units/mL (U-700) for subcutaneous use. Each mL contains 700 units of insulin icodec-abae and glycerin (15 mg), metacresol (1.08 mg), phenol (5.65 mg), sodium chloride (1.17 mg), zinc acetate (101 mcg), and Water for Injection. Awiqli has a pH of approximately 7.4. Hydrochloric acid or sodium hydroxide may be added to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>0169-3204-15</NDCCode>
<PackageDescription>5 SYRINGE, PLASTIC in 1 CARTON (0169-3204-15) / 3 mL in 1 SYRINGE, PLASTIC</PackageDescription>
<NDC11Code>00169-3204-15</NDC11Code>
<ProductNDC>0169-3204</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fiasp</ProprietaryName>
<NonProprietaryName>Insulin Aspart Injection</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20171020</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA208751</ApplicationNumber>
<LabelerName>Novo Nordisk</LabelerName>
<SubstanceName>INSULIN ASPART</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-07-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171020</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>FIASP is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin aspart is a rapid-acting insulin analog for subcutaneous or intravenous administration. Insulin aspart is homologous with regular human insulin with the exception of a single substitution of the amino acid proline by aspartic acid in position B28, and is produced by recombinant DNA technology utilizing Saccharomyces cerevisiae. Insulin aspart has the empirical formula C256H381N65079S6 and a molecular weight of 5825.8 daltons. FIASP (insulin aspart) injection is an aqueous, sterile, clear and colorless solution. Each mL contains 100 units of insulin aspart and the inactive ingredients: arginine (as L-arginine hydrochloride), USP (3.48 mg); dibasic sodium phosphate, USP (0.42 mg); glycerin, USP (3.3 mg); metacresol, USP (1.72 mg); niacinamide, USP (20.8 mg); phenol, USP (1.50 mg); zinc (as zinc acetate), USP (19.6 mcg) and Water for Injection. Hydrochloric acid and/or sodium hydroxide may be added to adjust pH to 7.1.</Description>
</NDC>
<NDC>
<NDCCode>0169-3204-97</NDCCode>
<PackageDescription>1 SYRINGE, PLASTIC in 1 CARTON (0169-3204-97) / 3 mL in 1 SYRINGE, PLASTIC (0169-3204-90) </PackageDescription>
<NDC11Code>00169-3204-97</NDC11Code>
<ProductNDC>0169-3204</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fiasp</ProprietaryName>
<NonProprietaryName>Insulin Aspart Injection</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20171020</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA208751</ApplicationNumber>
<LabelerName>Novo Nordisk</LabelerName>
<SubstanceName>INSULIN ASPART</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-07-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171020</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>FIASP is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin aspart is a rapid-acting insulin analog for subcutaneous or intravenous administration. Insulin aspart is homologous with regular human insulin with the exception of a single substitution of the amino acid proline by aspartic acid in position B28, and is produced by recombinant DNA technology utilizing Saccharomyces cerevisiae. Insulin aspart has the empirical formula C256H381N65079S6 and a molecular weight of 5825.8 daltons. FIASP (insulin aspart) injection is an aqueous, sterile, clear and colorless solution. Each mL contains 100 units of insulin aspart and the inactive ingredients: arginine (as L-arginine hydrochloride), USP (3.48 mg); dibasic sodium phosphate, USP (0.42 mg); glycerin, USP (3.3 mg); metacresol, USP (1.72 mg); niacinamide, USP (20.8 mg); phenol, USP (1.50 mg); zinc (as zinc acetate), USP (19.6 mcg) and Water for Injection. Hydrochloric acid and/or sodium hydroxide may be added to adjust pH to 7.1.</Description>
</NDC>
<NDC>
<NDCCode>0169-3205-15</NDCCode>
<PackageDescription>5 CARTRIDGE in 1 CARTON (0169-3205-15) / 3 mL in 1 CARTRIDGE (0169-3205-11) </PackageDescription>
<NDC11Code>00169-3205-15</NDC11Code>
<ProductNDC>0169-3205</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fiasp</ProprietaryName>
<NonProprietaryName>Insulin Aspart Injection</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20171020</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA208751</ApplicationNumber>
<LabelerName>Novo Nordisk</LabelerName>
<SubstanceName>INSULIN ASPART</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-07-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>FIASP is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin aspart is a rapid-acting insulin analog for subcutaneous or intravenous administration. Insulin aspart is homologous with regular human insulin with the exception of a single substitution of the amino acid proline by aspartic acid in position B28, and is produced by recombinant DNA technology utilizing Saccharomyces cerevisiae. Insulin aspart has the empirical formula C256H381N65079S6 and a molecular weight of 5825.8 daltons. FIASP (insulin aspart) injection is an aqueous, sterile, clear and colorless solution. Each mL contains 100 units of insulin aspart and the inactive ingredients: arginine (as L-arginine hydrochloride), USP (3.48 mg); dibasic sodium phosphate, USP (0.42 mg); glycerin, USP (3.3 mg); metacresol, USP (1.72 mg); niacinamide, USP (20.8 mg); phenol, USP (1.50 mg); zinc (as zinc acetate), USP (19.6 mcg) and Water for Injection. Hydrochloric acid and/or sodium hydroxide may be added to adjust pH to 7.1.</Description>
</NDC>
<NDC>
<NDCCode>0169-3205-95</NDCCode>
<PackageDescription>5 CARTRIDGE in 1 CARTON (0169-3205-95) / 3 mL in 1 CARTRIDGE (0169-3205-91) </PackageDescription>
<NDC11Code>00169-3205-95</NDC11Code>
<ProductNDC>0169-3205</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fiasp</ProprietaryName>
<NonProprietaryName>Insulin Aspart Injection</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20171020</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA208751</ApplicationNumber>
<LabelerName>Novo Nordisk</LabelerName>
<SubstanceName>INSULIN ASPART</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-07-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191001</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>FIASP is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin aspart is a rapid-acting insulin analog for subcutaneous or intravenous administration. Insulin aspart is homologous with regular human insulin with the exception of a single substitution of the amino acid proline by aspartic acid in position B28, and is produced by recombinant DNA technology utilizing Saccharomyces cerevisiae. Insulin aspart has the empirical formula C256H381N65079S6 and a molecular weight of 5825.8 daltons. FIASP (insulin aspart) injection is an aqueous, sterile, clear and colorless solution. Each mL contains 100 units of insulin aspart and the inactive ingredients: arginine (as L-arginine hydrochloride), USP (3.48 mg); dibasic sodium phosphate, USP (0.42 mg); glycerin, USP (3.3 mg); metacresol, USP (1.72 mg); niacinamide, USP (20.8 mg); phenol, USP (1.50 mg); zinc (as zinc acetate), USP (19.6 mcg) and Water for Injection. Hydrochloric acid and/or sodium hydroxide may be added to adjust pH to 7.1.</Description>
</NDC>
<NDC>
<NDCCode>0169-3303-12</NDCCode>
<PackageDescription>5 CARTRIDGE in 1 CARTON (0169-3303-12) / 3 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>00169-3303-12</NDC11Code>
<ProductNDC>0169-3303</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Novolog</ProprietaryName>
<NonProprietaryName>Insulin Aspart</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20010827</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020986</ApplicationNumber>
<LabelerName>Novo Nordisk</LabelerName>
<SubstanceName>INSULIN ASPART</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010827</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NOVOLOG is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin aspart is a rapid-acting human insulin analog homologous with regular human insulin with the exception of a single substitution of the amino acid proline by aspartic acid in position B28, and is produced by recombinant DNA technology utilizing Saccharomyces cerevisiae (baker's yeast). Insulin aspart has the empirical formula C256H381N65079S6 and a molecular weight of 5825.8 Da. NOVOLOG (insulin aspart) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL contains 100 units of insulin aspart and the inactive ingredients: disodium hydrogen phosphate dihydrate (1.25 mg), glycerin (16.0 mg), metacresol (1.72 mg), phenol (1.50 mg), sodium chloride (0.58 mg), zinc (19.6 mcg), and Water for Injection, USP. NOVOLOG has a pH of 7.2-7.6. Hydrochloric acid 10% and/or sodium hydroxide 10% may be added to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>0169-3303-90</NDCCode>
<PackageDescription>5 CARTRIDGE in 1 CARTON (0169-3303-90) / 3 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>00169-3303-90</NDC11Code>
<ProductNDC>0169-3303</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Novolog</ProprietaryName>
<NonProprietaryName>Insulin Aspart</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20010827</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020986</ApplicationNumber>
<LabelerName>Novo Nordisk</LabelerName>
<SubstanceName>INSULIN ASPART</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010827</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>NOVOLOG is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin aspart is a rapid-acting human insulin analog homologous with regular human insulin with the exception of a single substitution of the amino acid proline by aspartic acid in position B28, and is produced by recombinant DNA technology utilizing Saccharomyces cerevisiae (baker's yeast). Insulin aspart has the empirical formula C256H381N65079S6 and a molecular weight of 5825.8 Da. NOVOLOG (insulin aspart) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL contains 100 units of insulin aspart and the inactive ingredients: disodium hydrogen phosphate dihydrate (1.25 mg), glycerin (16.0 mg), metacresol (1.72 mg), phenol (1.50 mg), sodium chloride (0.58 mg), zinc (19.6 mcg), and Water for Injection, USP. NOVOLOG has a pH of 7.2-7.6. Hydrochloric acid 10% and/or sodium hydroxide 10% may be added to adjust pH.</Description>
</NDC>
</NDCList>