{
"NDC": [
{
"NDCCode": "80425-0548-8",
"PackageDescription": "240 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (80425-0548-8) ",
"NDC11Code": "80425-0548-08",
"ProductNDC": "80425-0548",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tramadol Hydrochloride",
"NonProprietaryName": "Tramadol Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250827",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211825",
"LabelerName": "Advanced Rx of Tennessee, LLC",
"SubstanceName": "TRAMADOL HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-12-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250827",
"SamplePackage": "N",
"IndicationAndUsage": "Tramadol hydrochloride tablets are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration [see Warnings and Precautions ( 5.1)] , reserve tramadol hydrochloride tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated or are not expected to be tolerated., 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.",
"Description": "Tramadol hydrochloride tablets, USP for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride is (±) cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. The structural formula is:. The molecular weight of tramadol hydrochloride, USP is 299.98. Tramadol hydrochloride is a white or almost white, crystalline powder. It is freely soluble in water and in methanol, very slightly soluble in acetone and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride tablets, USP contain 50 mg of tramadol hydrochloride, USP and are pale yellow in color. Inactive ingredients in the tablet are colloidal silicon dioxide, croscarmellose sodium, hypromellose, iron oxide yellow, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide."
},
{
"NDCCode": "80425-0276-8",
"PackageDescription": "240 TABLET, COATED in 1 BOTTLE (80425-0276-8) ",
"NDC11Code": "80425-0276-08",
"ProductNDC": "80425-0276",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tramadol Hydrochloride",
"NonProprietaryName": "Tramadol Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230217",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208708",
"LabelerName": "Advanced Rx Pharmacy of Tennessee, LLC",
"SubstanceName": "TRAMADOL HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230331",
"SamplePackage": "N",
"IndicationAndUsage": "Tramadol hydrochloride tablets, USP are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see WARNINGS AND PRECAUTIONS (5.1)] , reserve tramadol hydrochloride tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]: 1 Have not been tolerated or are not expected to be tolerated., 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.",
"Description": "Tramadol Hydrochloride Tablets, USP for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride is (±) cis-2-[(dimethylamino) methyl]-1-(3- methoxyphenyl) cyclohexanol hydrochloride. The structural formula is. The molecular weight of tramadol hydrochloride is 299.8. Tramadol hydrochloride is a white crystalline powder. It is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol Hydrochloride Tablets, USP 50 mg and Tramadol Hydrochloride Tablets, USP 100 mg contain 50 mg and 100 mg of tramadol hydrochloride respectively and are white in color. Inactive ingredients in the tablet are hypromellose, lactose anhydrous, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, pregelatinized starch,sodium starch glycolate and titanium dioxide."
},
{
"NDCCode": "80425-0356-1",
"PackageDescription": "5 PATCH in 1 POUCH (80425-0356-1) / 8.5 g in 1 PATCH",
"NDC11Code": "80425-0356-01",
"ProductNDC": "80425-0356",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nuvira",
"NonProprietaryName": "Capsaicin 0.025%, Menthol 10%, Methyl Nicotinate 0.25%, Methyl Salicylate 10%",
"DosageFormName": "PATCH",
"RouteName": "TOPICAL",
"StartMarketingDate": "20231016",
"EndMarketingDate": "20240331",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "505G(a)(3)",
"LabelerName": "Advanced Rx Pharmacy of Tennessee, LLC",
"SubstanceName": "CAPSAICIN; MENTHOL; METHYL NICOTINATE; METHYL SALICYLATE",
"StrengthNumber": ".00025; .1; .0025; .1",
"StrengthUnit": "g/g; g/g; g/g; g/g",
"Pharm_Classes": "Nicotinic Acid [EPC], Nicotinic Acids [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20231016",
"EndMarketingDatePackage": "20240331",
"SamplePackage": "N"
},
{
"NDCCode": "80425-0367-1",
"PackageDescription": "8 POUCH in 1 BOX (80425-0367-1) / 4 PATCH in 1 POUCH / 2.7 g in 1 PATCH",
"NDC11Code": "80425-0367-01",
"ProductNDC": "80425-0367",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Trubrexa",
"NonProprietaryName": "Lidocaine And Capsaicin",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20231127",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Advanced Rx Pharmacy of Tennessee, LLC",
"SubstanceName": "CAPSAICIN; LIDOCAINE",
"StrengthNumber": ".00025; .0475",
"StrengthUnit": "g/g; g/g",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2024-06-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231127",
"SamplePackage": "N",
"IndicationAndUsage": "Trubrexa TMTransdermal Patch is indicated in adults over the age of 12 years old for the treatment of acute and chronic pain in muscles and joints associated with muscle soreness, strains, sprains, arthritis, simple backache, muscle stiffness, and more.",
"Description": "Trubrexa TMTransdermal Patch is comprised of an adhesive material containing 4.75% lidocaine and 0.025% capsaicin. Each patch is 2 in x 2 in (5.08 cm x 5.08 cm) and consists of an adhesive side containing the active/inactive ingredients and an outer surface backing layer with breathable fabric. The adhesive side is covered with a removable, clear, unprinted, plastic film. The outer surface of the backing layer is imprinted with the Trubrexa TMTransdermal Patch logo. 4 patches are included in each pouch bag. The inactive ingredients include: Arnica, Magnesium, Polyacrylate, Vegan Glycerol, and Water. Trubrexa TMTransdermal Patch is Latex Free, Paraben Free, and Vegan."
},
{
"NDCCode": "80425-0445-1",
"PackageDescription": "1 KIT in 1 KIT (80425-0445-1) * 58.8 g in 1 BOTTLE, PLASTIC * 1.2 g in 1 BOTTLE, PLASTIC",
"NDC11Code": "80425-0445-01",
"ProductNDC": "80425-0445",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "KIT",
"StartMarketingDate": "20241017",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Advanced Rx Pharmacy of Tennessee, LLC",
"Status": "Unfinished",
"LastUpdate": "2026-01-12",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "17-OCT-24"
},
{
"NDCCode": "80425-0501-8",
"PackageDescription": "240 TABLET, COATED in 1 BOTTLE (80425-0501-8) ",
"NDC11Code": "80425-0501-08",
"ProductNDC": "80425-0501",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tramadol Hydrochloride",
"NonProprietaryName": "Tramadol Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250213",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076003",
"LabelerName": "Advanced Rx of Tennessee, LLC",
"SubstanceName": "TRAMADOL HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-02-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250213",
"SamplePackage": "N",
"IndicationAndUsage": "Tramadol hydrochloride tablets are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration [see Warnings and Precautions (5.1)] , reserve tramadol hydrochloride tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or opioid combination products): : 1 Have not been tolerated or are not expected to be tolerated,, 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.",
"Description": "Tramadol hydrochloride tablets USP, for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride is (±) cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. The structural formula is:. The molecular weight of tramadol hydrochloride is 299.84. Tramadol hydrochloride, USP is a white or almost white crystalline powder. It is freely soluble in water and in methanol, very slightly soluble in acetone and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride tablets, USP contain 50 mg of tramadol hydrochloride, USP and are white in color. Inactive ingredients in the tablet are hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, pregelatinized starch, sodium starch glycolate, and titanium dioxide."
},
{
"NDCCode": "80425-0588-8",
"PackageDescription": "240 TABLET in 1 BOTTLE (80425-0588-8) ",
"NDC11Code": "80425-0588-08",
"ProductNDC": "80425-0588",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tramadol Hydrochloride",
"NonProprietaryName": "Tramadol Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260626",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075968",
"LabelerName": "Advanced Rx of Tennessee, LLC",
"SubstanceName": "TRAMADOL HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260626",
"SamplePackage": "N",
"IndicationAndUsage": "Tramadol hydrochloride tablets are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions ( 5.1)] , reserve opioid analgesics, including tramadol hydrochloride tablets for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.",
"Description": "Tramadol hydrochloride tablets, for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride is (±) cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. The structural formula is:. The molecular weight of tramadol hydrochloride is 299.84. Tramadol hydrochloride is a white, crystalline powder. It is freely soluble in water and in methanol, very slightly soluble in acetone and has a pKa of 9.41. Tramadol hydrochloride tablets contain 50 mg of tramadol hydrochloride (equivalent to 43.9 mg of tramadol) and are white in color. Inactive ingredients in the tablet are colloidal silicon dioxide, corn starch, lactose monohydrate, magnesium stearate, microcrystalline cellulose, opadry white, sodium starch glycolate. The opadry white contains HPMC 2910/Hypromellose 3 mPas and 6 mPas, Macrogol, Polysorbate 80 and Titanium Dioxide."
},
{
"NDCCode": "0548-5604-00",
"PackageDescription": "10 SYRINGE in 1 CARTON (0548-5604-00) / .8 mL in 1 SYRINGE",
"NDC11Code": "00548-5604-00",
"ProductNDC": "0548-5604",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Enoxaparin Sodium",
"NonProprietaryName": "Enoxaparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20110919",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076684",
"LabelerName": "Amphastar Pharmaceuticals, Inc.",
"SubstanceName": "ENOXAPARIN SODIUM",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20110919",
"SamplePackage": "N",
"IndicationAndUsage": "Enoxaparin Sodium Injection is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (MI) (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4).",
"Description": "Enoxaparin Sodium Injection USP is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5.Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6 anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is."
},
{
"NDCCode": "0548-5606-00",
"PackageDescription": "10 SYRINGE in 1 CARTON (0548-5606-00) / .8 mL in 1 SYRINGE",
"NDC11Code": "00548-5606-00",
"ProductNDC": "0548-5606",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Enoxaparin Sodium",
"NonProprietaryName": "Enoxaparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20110919",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076684",
"LabelerName": "Amphastar Pharmaceuticals, Inc.",
"SubstanceName": "ENOXAPARIN SODIUM",
"StrengthNumber": "150",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20110919",
"SamplePackage": "N",
"IndicationAndUsage": "Enoxaparin Sodium Injection is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (MI) (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4).",
"Description": "Enoxaparin Sodium Injection USP is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5.Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6 anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is."
},
{
"NDCCode": "0548-5634-00",
"PackageDescription": "10 SYRINGE in 1 CARTON (0548-5634-00) > .8 mL in 1 SYRINGE",
"NDC11Code": "00548-5634-00",
"ProductNDC": "0548-5634",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Enoxaparin Sodium",
"NonProprietaryName": "Enoxaparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20110919",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076684",
"LabelerName": "Amphastar Pharmaceuticals, Inc.",
"SubstanceName": "ENOXAPARIN SODIUM",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20110919",
"SamplePackage": "N",
"IndicationAndUsage": "Enoxaparin Sodium Injection is a low molecular weight heparin [LMWH] indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction [MI] (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction [STEMI] managed medically or with subsequent percutaneous coronary intervention [PCI] (1.4) .",
"Description": "Enoxaparin Sodium Injection is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains an 1,6 anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is."
},
{
"NDCCode": "0548-5636-00",
"PackageDescription": "10 SYRINGE in 1 CARTON (0548-5636-00) > .8 mL in 1 SYRINGE",
"NDC11Code": "00548-5636-00",
"ProductNDC": "0548-5636",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Enoxaparin Sodium",
"NonProprietaryName": "Enoxaparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20110919",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076684",
"LabelerName": "Amphastar Pharmaceuticals, Inc.",
"SubstanceName": "ENOXAPARIN SODIUM",
"StrengthNumber": "150",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20110919",
"SamplePackage": "N",
"IndicationAndUsage": "Enoxaparin Sodium Injection is a low molecular weight heparin [LMWH] indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction [MI] (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction [STEMI] managed medically or with subsequent percutaneous coronary intervention [PCI] (1.4) .",
"Description": "Enoxaparin Sodium Injection is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains an 1,6 anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is."
},
{
"NDCCode": "38779-0548-8",
"PackageDescription": "500 g in 1 JAR (38779-0548-8) ",
"NDC11Code": "38779-0548-08",
"ProductNDC": "38779-0548",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Naproxen",
"DosageFormName": "POWDER",
"StartMarketingDate": "20140711",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Medisca Inc.",
"SubstanceName": "NAPROXEN",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Unfinished",
"LastUpdate": "2025-11-21",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "22-JUN-17"
},
{
"NDCCode": "51552-0548-8",
"PackageDescription": "2500 g in 1 CONTAINER (51552-0548-8) ",
"NDC11Code": "51552-0548-08",
"ProductNDC": "51552-0548",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Cellulose Microcrystalline",
"DosageFormName": "POWDER",
"StartMarketingDate": "20040102",
"EndMarketingDate": "20270215",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Fagron Inc",
"SubstanceName": "CELLULOSE, MICROCRYSTALLINE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Unfinished",
"LastUpdate": "2023-12-19",
"StartMarketingDatePackage": "02-JAN-04",
"EndMarketingDatePackage": "15-FEB-27"
},
{
"NDCCode": "71335-0548-8",
"PackageDescription": "14 TABLET, FILM COATED in 1 BOTTLE (71335-0548-8) ",
"NDC11Code": "71335-0548-08",
"ProductNDC": "71335-0548",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Topiramate",
"NonProprietaryName": "Topiramate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20141215",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090278",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "TOPIRAMATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2024-08-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190123",
"SamplePackage": "N",
"IndicationAndUsage": "Topiramate is indicated for: 1 Epilepsy: initial monotherapy for the treatment of partial-onset or primary generalized tonic-clonic seizures in patients 2 years of age and older (1.1); adjunctive therapy for the treatment of partial-onset seizures, primary generalized tonic-clonic seizures, or seizures associated with Lennox- Gastaut syndrome in patients 2 years of age and older (1.2), 2 Preventive treatment of migraine in patients 12 years of age and older (1.3).",
"Description": "Topiramate is a sulfamate-substituted monosaccharide. Topiramate tablets are available as 25 mg, 50 mg, 100 mg, and 200 mg round tablets for oral administration. Topiramate is a white crystalline powder with a bitter taste. Topiramate USP is most soluble in alkaline solutions containing sodium hydroxide or sodium phosphate and having a pH of 9 to 10. It is freely soluble in acetone, chloroform, dimethylsulfoxide, and ethanol. The solubility in water is 9.8 mg/mL. Its saturated solution has a pH of 6.3. Topiramate has the molecular formula C12H21NO8S and a molecular weight of 339.37. Topiramate is designated chemically as 2,3:4,5-Di-O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula: Topiramate tablets, USP contain the following inactive ingredients: anhydrous lactose, microcrystalline cellulose, pregelatinized maize starch, sodium starch glycolate type A potato, magnesium stearate, polyvinyl alcohol, titanium dioxide, polyethylene glycol and talc. In addition, individual tablets contain: 50 mg tablets: iron oxide yellow 100 mg tablets: iron oxide yellow, and D&C Yellow # 10 Aluminum Lake 200 mg tablets: iron oxide red, lecithin (soya), and iron oxide black."
},
{
"NDCCode": "80425-0548-1",
"PackageDescription": "15 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (80425-0548-1) ",
"NDC11Code": "80425-0548-01",
"ProductNDC": "80425-0548",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tramadol Hydrochloride",
"NonProprietaryName": "Tramadol Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250827",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211825",
"LabelerName": "Advanced Rx of Tennessee, LLC",
"SubstanceName": "TRAMADOL HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-12-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250827",
"SamplePackage": "N",
"IndicationAndUsage": "Tramadol hydrochloride tablets are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration [see Warnings and Precautions ( 5.1)] , reserve tramadol hydrochloride tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated or are not expected to be tolerated., 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.",
"Description": "Tramadol hydrochloride tablets, USP for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride is (±) cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. The structural formula is:. The molecular weight of tramadol hydrochloride, USP is 299.98. Tramadol hydrochloride is a white or almost white, crystalline powder. It is freely soluble in water and in methanol, very slightly soluble in acetone and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride tablets, USP contain 50 mg of tramadol hydrochloride, USP and are pale yellow in color. Inactive ingredients in the tablet are colloidal silicon dioxide, croscarmellose sodium, hypromellose, iron oxide yellow, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide."
},
{
"NDCCode": "80425-0548-2",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (80425-0548-2) ",
"NDC11Code": "80425-0548-02",
"ProductNDC": "80425-0548",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tramadol Hydrochloride",
"NonProprietaryName": "Tramadol Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250827",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211825",
"LabelerName": "Advanced Rx of Tennessee, LLC",
"SubstanceName": "TRAMADOL HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-12-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250827",
"SamplePackage": "N",
"IndicationAndUsage": "Tramadol hydrochloride tablets are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration [see Warnings and Precautions ( 5.1)] , reserve tramadol hydrochloride tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated or are not expected to be tolerated., 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.",
"Description": "Tramadol hydrochloride tablets, USP for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride is (±) cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. The structural formula is:. The molecular weight of tramadol hydrochloride, USP is 299.98. Tramadol hydrochloride is a white or almost white, crystalline powder. It is freely soluble in water and in methanol, very slightly soluble in acetone and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride tablets, USP contain 50 mg of tramadol hydrochloride, USP and are pale yellow in color. Inactive ingredients in the tablet are colloidal silicon dioxide, croscarmellose sodium, hypromellose, iron oxide yellow, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide."
},
{
"NDCCode": "80425-0548-3",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (80425-0548-3) ",
"NDC11Code": "80425-0548-03",
"ProductNDC": "80425-0548",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tramadol Hydrochloride",
"NonProprietaryName": "Tramadol Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250827",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211825",
"LabelerName": "Advanced Rx of Tennessee, LLC",
"SubstanceName": "TRAMADOL HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-12-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250827",
"SamplePackage": "N",
"IndicationAndUsage": "Tramadol hydrochloride tablets are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration [see Warnings and Precautions ( 5.1)] , reserve tramadol hydrochloride tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated or are not expected to be tolerated., 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.",
"Description": "Tramadol hydrochloride tablets, USP for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride is (±) cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. The structural formula is:. The molecular weight of tramadol hydrochloride, USP is 299.98. Tramadol hydrochloride is a white or almost white, crystalline powder. It is freely soluble in water and in methanol, very slightly soluble in acetone and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride tablets, USP contain 50 mg of tramadol hydrochloride, USP and are pale yellow in color. Inactive ingredients in the tablet are colloidal silicon dioxide, croscarmellose sodium, hypromellose, iron oxide yellow, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide."
},
{
"NDCCode": "80425-0548-4",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (80425-0548-4) ",
"NDC11Code": "80425-0548-04",
"ProductNDC": "80425-0548",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tramadol Hydrochloride",
"NonProprietaryName": "Tramadol Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250827",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211825",
"LabelerName": "Advanced Rx of Tennessee, LLC",
"SubstanceName": "TRAMADOL HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-12-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250827",
"SamplePackage": "N",
"IndicationAndUsage": "Tramadol hydrochloride tablets are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration [see Warnings and Precautions ( 5.1)] , reserve tramadol hydrochloride tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated or are not expected to be tolerated., 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.",
"Description": "Tramadol hydrochloride tablets, USP for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride is (±) cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. The structural formula is:. The molecular weight of tramadol hydrochloride, USP is 299.98. Tramadol hydrochloride is a white or almost white, crystalline powder. It is freely soluble in water and in methanol, very slightly soluble in acetone and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride tablets, USP contain 50 mg of tramadol hydrochloride, USP and are pale yellow in color. Inactive ingredients in the tablet are colloidal silicon dioxide, croscarmellose sodium, hypromellose, iron oxide yellow, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide."
},
{
"NDCCode": "80425-0548-5",
"PackageDescription": "120 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (80425-0548-5) ",
"NDC11Code": "80425-0548-05",
"ProductNDC": "80425-0548",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tramadol Hydrochloride",
"NonProprietaryName": "Tramadol Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250827",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211825",
"LabelerName": "Advanced Rx of Tennessee, LLC",
"SubstanceName": "TRAMADOL HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-12-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250827",
"SamplePackage": "N",
"IndicationAndUsage": "Tramadol hydrochloride tablets are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration [see Warnings and Precautions ( 5.1)] , reserve tramadol hydrochloride tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated or are not expected to be tolerated., 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.",
"Description": "Tramadol hydrochloride tablets, USP for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride is (±) cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. The structural formula is:. The molecular weight of tramadol hydrochloride, USP is 299.98. Tramadol hydrochloride is a white or almost white, crystalline powder. It is freely soluble in water and in methanol, very slightly soluble in acetone and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride tablets, USP contain 50 mg of tramadol hydrochloride, USP and are pale yellow in color. Inactive ingredients in the tablet are colloidal silicon dioxide, croscarmellose sodium, hypromellose, iron oxide yellow, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide."
},
{
"NDCCode": "80425-0548-6",
"PackageDescription": "40 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (80425-0548-6) ",
"NDC11Code": "80425-0548-06",
"ProductNDC": "80425-0548",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tramadol Hydrochloride",
"NonProprietaryName": "Tramadol Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250827",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211825",
"LabelerName": "Advanced Rx of Tennessee, LLC",
"SubstanceName": "TRAMADOL HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-12-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250827",
"SamplePackage": "N",
"IndicationAndUsage": "Tramadol hydrochloride tablets are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration [see Warnings and Precautions ( 5.1)] , reserve tramadol hydrochloride tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated or are not expected to be tolerated., 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.",
"Description": "Tramadol hydrochloride tablets, USP for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride is (±) cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. The structural formula is:. The molecular weight of tramadol hydrochloride, USP is 299.98. Tramadol hydrochloride is a white or almost white, crystalline powder. It is freely soluble in water and in methanol, very slightly soluble in acetone and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride tablets, USP contain 50 mg of tramadol hydrochloride, USP and are pale yellow in color. Inactive ingredients in the tablet are colloidal silicon dioxide, croscarmellose sodium, hypromellose, iron oxide yellow, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide."
},
{
"NDCCode": "80425-0548-7",
"PackageDescription": "180 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (80425-0548-7) ",
"NDC11Code": "80425-0548-07",
"ProductNDC": "80425-0548",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tramadol Hydrochloride",
"NonProprietaryName": "Tramadol Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250827",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211825",
"LabelerName": "Advanced Rx of Tennessee, LLC",
"SubstanceName": "TRAMADOL HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-12-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250827",
"SamplePackage": "N",
"IndicationAndUsage": "Tramadol hydrochloride tablets are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration [see Warnings and Precautions ( 5.1)] , reserve tramadol hydrochloride tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated or are not expected to be tolerated., 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.",
"Description": "Tramadol hydrochloride tablets, USP for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride is (±) cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. The structural formula is:. The molecular weight of tramadol hydrochloride, USP is 299.98. Tramadol hydrochloride is a white or almost white, crystalline powder. It is freely soluble in water and in methanol, very slightly soluble in acetone and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride tablets, USP contain 50 mg of tramadol hydrochloride, USP and are pale yellow in color. Inactive ingredients in the tablet are colloidal silicon dioxide, croscarmellose sodium, hypromellose, iron oxide yellow, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide."
},
{
"NDCCode": "0548-2311-00",
"PackageDescription": "1 SYRINGE in 1 CARTON (0548-2311-00) / 2.24 mL in 1 SYRINGE",
"NDC11Code": "00548-2311-00",
"ProductNDC": "0548-2311",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Teriparatide",
"NonProprietaryName": "Teriparatide",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20251222",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213641",
"LabelerName": "Amphastar Pharmaceuticals, Inc.",
"SubstanceName": "TERIPARATIDE",
"StrengthNumber": "250",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Parathyroid Hormone Analog [EPC], Parathyroid Hormone [CS]",
"Status": "Active",
"LastUpdate": "2025-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251222",
"SamplePackage": "N",
"IndicationAndUsage": "Teriparatide injection is indicated: 1 For the treatment of postmenopausal women with osteoporosis at high risk for fracture (defined herein as having a history of osteoporotic fracture or multiple risk factors for fracture) or who have failed or are intolerant to other available osteoporosis therapy. In postmenopausal women with osteoporosis, Teriparatide injection reduces the risk of vertebral and nonvertebral fractures., 2 To increase bone mass in men with primary or hypogonadal osteoporosis at high risk for fracture or who have failed or are intolerant to other available osteoporosis therapy., 3 For the treatment of men and women with osteoporosis associated with sustained systemic glucocorticoid therapy (daily dosage equivalent to 5 mg or greater of prednisone) at high risk for fracture or who have failed or are intolerant to other available osteoporosis therapy.",
"Description": "Teriparatide injection is a synthetic parathyroid hormone analog (PTH 1-34). It has an identical sequence to the 34 N-terminal amino acids (the biologically active region) of the 84-amino acid human parathyroid hormone. The molecular formula of teriparatide is C181H291N55O51S2 and molecular weight is 4117.8 daltons. Its amino acid sequence is shown below. Teriparatide is manufactured using synthetic technology. Teriparatide injection is supplied as a sterile, colorless, clear, isotonic solution in a glass cartridge which is pre-assembled into a single-patient-use delivery device (pen) for subcutaneous injection. Each delivery device (pen) is filled with volume to allow delivery of 2.24 mL. Each mL contains 250 mcg of teriparatide (as a free base), 0.41 mg of glacial acetic acid, 0.1 mg of sodium acetate (anhydrous), 45.4 mg of mannitol, 3 mg of Metacresol, and Water for Injection. In addition, hydrochloric acid solution 10% and/or sodium hydroxide solution 10% may have been added to adjust the pH to 4. Each prefilled delivery device (pen) delivers 20 mcg of teriparatide per dose for up to 28 days. Each device contains additional volume to allow troubleshooting of the device 2 times."
},
{
"NDCCode": "0548-5001-00",
"PackageDescription": "1 SYRINGE in 1 CARTON (0548-5001-00) > .5 mL in 1 SYRINGE",
"NDC11Code": "00548-5001-00",
"ProductNDC": "0548-5001",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ganirelix Acetate",
"NonProprietaryName": "Ganirelix Acetate",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20220620",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212613",
"LabelerName": "Amphastar Pharmaceuticals, Inc.",
"SubstanceName": "GANIRELIX ACETATE",
"StrengthNumber": "250",
"StrengthUnit": "ug/.5mL",
"Pharm_Classes": "Decreased GnRH Secretion [PE], Gonadotropin Releasing Hormone Receptor Antagonist [EPC], Gonadotropin Releasing Hormone Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2022-06-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220620",
"SamplePackage": "N",
"IndicationAndUsage": "Ganirelix Acetate Injection is indicated for the inhibition of premature LH surges in women undergoing controlled ovarian hyperstimulation.",
"Description": "Ganirelix Acetate Injection is a synthetic decapeptide with high antagonistic activity against naturally occurring gonadotropin-releasing hormone (GnRH). Ganirelix Acetate is derived from native GnRH with substitutions of amino acids at positions 1, 2, 3, 6, 8, and 10 to form the following molecular formula of the peptide: N-acetyl-3-(2-naphthyl)-D-alanyl-4-chloro-D-phenylalanyl-3-(3-pyridyl)-D-alanyl-L-seryl-L-tyrosyl-N9,N10-diethyl-D-homoarginyl-L-leucyl-N9,N10-diethyl-L-homoarginyl-L-prolyl-D-alanylamide acetate. The molecular weight for Ganirelix Acetate is 1570.4 as an anhydrous free base. The structural formula is as follows. Ganirelix Acetate. Ganirelix Acetate Injection is supplied as a colorless, sterile, ready-to-use, aqueous solution intended for SUBCUTANEOUS administration only. Each single dose, sterile, prefilled syringe contains 250 mcg/0.5 mL of Ganirelix Acetate, 0.1 mg glacial acetic acid, 23.5 mg mannitol, and water for injection adjusted to pH 5.0 with acetic acid, NF and/or sodium hydroxide, NF."
},
{
"NDCCode": "0548-5850-00",
"PackageDescription": "1 KIT in 1 KIT (0548-5850-00) * 1 mL in 1 VIAL (0548-5905-00) * 1 mL in 1 SYRINGE (0548-5831-00) ",
"NDC11Code": "00548-5850-00",
"ProductNDC": "0548-5850",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glucagon",
"NonProprietaryName": "Glucagon",
"DosageFormName": "KIT",
"StartMarketingDate": "20210210",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208086",
"LabelerName": "Amphastar Pharmaceuticals, Inc.",
"Status": "Active",
"LastUpdate": "2026-08-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210210",
"SamplePackage": "N",
"IndicationAndUsage": "GLUCAGON for Injection is an antihypoglycemic agent and a gastrointestinal motility inhibitor indicated: 1 for the treatment of severe hypoglycemia in pediatric and adult patients with diabetes. (1.1), 2 as a diagnostic aid for use during radiologic examinations to temporarily inhibit movement of the gastrointestinal tract in adult patients. (1.2).",
"Description": "Glucagon is an antihypoglycemic agent and a gastrointestinal motility inhibitor. Glucagon is produced by solid state peptide synthesis and is highly purified. The chemical structure of the glucagon is identical to human glucagon. Glucagon is a single-chain polypeptide that contains 29 amino acid residues and has a molecular weight of 3483 Daltons.The empirical formula is C153H225N43O49S. The primary sequence of glucagon is shown below. Crystalline glucagon (synthetic origin) is a white to off-white powder. It is relatively insoluble in water but is soluble at a pH of less than 3 or more than 9.5. Glucagon for Injection is a sterile lyophilized white to off white powder in a vial and a syringe of sterile diluent for intravenous, intramuscular, or subcutaneous use. The vial contains 1 mg of glucagon, 49 mg of lactose monohydrate. Hydrochloric acid may have been added during manufacture to adjust the pH of the glucagon to 2.5 to 3.0. One International Unit of glucagon is equivalent to 1 mg of glucagon. The 1-mL diluent syringe contains 12 mg of glycerin, 1 mg hydrochloric acid, and Water for Injection, at pH 1.8 to 2.2."
},
{
"NDCCode": "0548-9090-10",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (0548-9090-10) / 1 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00548-9090-10",
"ProductNDC": "0548-9090",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amphadase",
"NonProprietaryName": "Hyaluronidase",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20041026",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA021665",
"LabelerName": "Amphastar Pharmaceuticals, Inc.",
"SubstanceName": "HYALURONIDASE",
"StrengthNumber": "150",
"StrengthUnit": "[USP'U]/mL",
"Pharm_Classes": "Endoglycosidase [EPC], Glycoside Hydrolases [CS]",
"Status": "Active",
"LastUpdate": "2024-09-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20041026",
"SamplePackage": "N",
"Description": "Hyaluronidase is an endoglycosidase. It is a preparation of purified bovine testicular hyaluronidase, a protein enzyme. Hyaluronidase is composed of two major glycosylated forms, α and β. The exact chemical structure of this enzyme is unknown. Amphadase® (hyaluronidase injection) is supplied as a sterile, clear and colorless, ready for use 1 mL solution in a single-dose vial for infiltration use, for interstitial use, for intramuscular use, for peribulbar use, for soft tissue use, or for subcutaneous use. Each mL contains 150 USP units of hyaluronidase with calcium chloride (0.4 mg), edetate disodium (1.0 mg), monobasic sodium phosphate (1.7 mg), sodium chloride (8.5 mg), not more than 0.1 mg thimerosal (mercury derivative), and Water for Injection, USP. Sodium hydroxide may be added to adjust pH. Amphadase® has an approximate pH of 6.8 and an osmolality of 295 to 355 mOsm."
},
{
"NDCCode": "13668-548-94",
"PackageDescription": "30 GRANULE, DELAYED RELEASE in 1 CARTON (13668-548-94) ",
"NDC11Code": "13668-0548-94",
"ProductNDC": "13668-548",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Esomeprazole Magnesium",
"ProprietaryNameSuffix": "For Delayed-release Oral Suspension",
"NonProprietaryName": "Esomeprazole Magnesium",
"DosageFormName": "GRANULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20250305",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212652",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "ESOMEPRAZOLE MAGNESIUM",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250305",
"SamplePackage": "N",
"IndicationAndUsage": "Esomeprazole magnesium for delayed-release oral suspension is a proton pump inhibitor (PPI). Esomeprazole magnesium for delayed-release oral suspension is indicated for the: 1 Short-term treatment in the healing of erosive esophagitis (EE) in adults and pediatric patients 12 years to 17 years of age. (1.1), 2 Maintenance of healing of EE in adults. (1.2), 3 Short-term treatment of heartburn and other symptoms associated GERD in adults and pediatric patients 12 years to 17 years of age. (1.3), 4 Risk reduction of nonsteroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults at risk for developing gastric ulcers due to age (60 years and older) and/or documented history of gastric ulcers. (1.4), 5 Helicobacter pylori eradication in adult patients to reduce the risk of duodenal ulcer recurrence in combination with amoxicillin and clarithromycin. (1.5), 6 Long-term treatment of pathological hypersecretory conditions, including Zollinger-Ellison syndrome in adults. (1.6).",
"Description": "The active ingredient in esomeprazole magnesium for delayed-release oral suspension is bis(5-methoxy-2-[(S)-[(4-methoxy-3,5-dimethyl-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole-1-yl) magnesium, a PPI. Esomeprazole is the S-isomer of omeprazole, which is a mixture of the S- and R- isomers. (Initial U.S. approval of esomeprazole magnesium: 2001). Its molecular formula is (C17H18N3O3S)2Mg with molecular weight of 713.1 on an anhydrous basis. The structural formula is. The magnesium salt is a white to slightly colored crystalline powder. The stability of esomeprazole magnesium USP is a function of pH; it rapidly degrades in acidic media, but it has acceptable stability under alkaline conditions. At pH 6.8 (buffer), the half-life of the magnesium salt is about 19 hours at 25°C and about 8 hours at 37°C. Esomeprazole magnesium for delayed-release oral suspension is supplied in packets. Each packet of esomeprazole magnesium for delayed-release oral suspension contains esomeprazole, in the form of enteric-coated pellets, and also inactive granules. : 1 10 mg esomeprazole (equivalent to 10.353 mg esomeprazole magnesium USP)."
},
{
"NDCCode": "21695-548-15",
"PackageDescription": "15 mL in 1 BOTTLE (21695-548-15)",
"NDC11Code": "21695-0548-15",
"ProductNDC": "21695-548",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Azithromycin",
"NonProprietaryName": "Azithromycin Monohydrate",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20080624",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065419",
"LabelerName": "Rebel Distributors Corp.",
"SubstanceName": "AZITHROMYCIN MONOHYDRATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Macrolide Antimicrobial [EPC],Macrolides [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Azithromycin for oral suspension is indicated for the treatment of patients with mild to moderate infections (pneumonia: see WARNINGS) caused by susceptible strains of the designated microorganisms in the specific conditions listed below. As recommended dosages, durations of therapy and applicable patient populations vary among these infections, please see DOSAGE AND ADMINISTRATION for specific dosing recommendations.",
"Description": "Azithromycin for oral suspension, USP contains the active ingredient azithromycin, an azalide, a subclass of macrolide antibiotics, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl)oxy]-2-ethyl-3,4,10 trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Azithromycin has the following structural formula. C38H72N2O12 M. W. 749.00. Azithromycin, as the monohydrate, is a white to off-white crystalline powder with a molecular formula of C38H72N2O12H2O and a molecular weight of 767.02. 5 mL of constituted suspension of azithromycin for oral suspension, 100 mg/5 mL and 200 mg/5 mL, contains 6 mg of sodium. Azithromycin for oral suspension, USP is supplied in bottles containing azithromycin monohydrate powder equivalent to 300 mg, 600 mg, 900 mg, or 1200 mg azithromycin per bottle and the following inactive ingredients: arabic gum, artificial aromatic substances, ethyl vanillin, FD&C Red #40, hydroxypropyl cellulose, maltodextrin, nature aromatic substances, nature identical aromatic substances, sucrose, tribasic sodium phosphate dodecahydrate, vanillin, and xanthan gum. After constitution, each 5 mL of suspension contains 100 mg or 200 mg of azithromycin. The dry powder before constitution is off-white to pinkish in color. The suspension after constitution is pink to red in color."
},
{
"NDCCode": "23155-548-41",
"PackageDescription": "10 VIAL in 1 CARTON (23155-548-41) / 2 mL in 1 VIAL (23155-548-31) ",
"NDC11Code": "23155-0548-41",
"ProductNDC": "23155-548",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ondansetron",
"NonProprietaryName": "Ondansetron",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20151109",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079224",
"LabelerName": "Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.",
"SubstanceName": "ONDANSETRON HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20151109",
"SamplePackage": "N",
"IndicationAndUsage": "Ondansetron Injection is a 5-HT3 receptor antagonist indicated for the prevention of: 1 nausea and vomiting associated with initial and repeat courses of emetogenic cancer chemotherapy. (1.1), 2 postoperative nausea and/or vomiting. (1.2).",
"Description": "The active ingredient of Ondansetron Injection, USP is ondansetron hydrochloride, a selective blocking agent of the serotonin 5-HT3 receptor type. Its chemical name is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula. The empirical formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.9 g/mol. Ondansetron HCl is a white to off-white powder that is soluble in water and normal saline. Each 1 mL of aqueous solution in the 2 mL single-dose vial contains 2 mg of ondansetron as the hydrochloride dihydrate; 9 mg of sodium chloride, USP; and 0.5 mg of citric acid monohydrate, USP and 0.25 mg of sodium citrate dihydrate, USP as buffers in Water for Injection, USP. Each 1 mL of aqueous solution in the 20 mL multi-dose vial contains 2 mg of ondansetron as the hydrochloride dihydrate; 8.3 mg of sodium chloride, USP; 0.5 mg of citric acid monohydrate, USP and 0.25 mg of sodium citrate dihydrate, USP as buffers; and 1.2 mg of methylparaben, NF and 0.15 mg of propylparaben, NF as preservatives in Water for Injection, USP. Ondansetron Injection, USP is a clear, colorless, nonpyrogenic, sterile solution for intravenous or intramuscular use. The pH of the injection solution is 3.3 to 4.0."
},
{
"NDCCode": "23155-548-42",
"PackageDescription": "25 VIAL in 1 CARTON (23155-548-42) / 2 mL in 1 VIAL (23155-548-31) ",
"NDC11Code": "23155-0548-42",
"ProductNDC": "23155-548",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ondansetron",
"NonProprietaryName": "Ondansetron",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20151109",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079224",
"LabelerName": "Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.",
"SubstanceName": "ONDANSETRON HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20151109",
"SamplePackage": "N",
"IndicationAndUsage": "Ondansetron Injection is a 5-HT3 receptor antagonist indicated for the prevention of: 1 nausea and vomiting associated with initial and repeat courses of emetogenic cancer chemotherapy. (1.1), 2 postoperative nausea and/or vomiting. (1.2).",
"Description": "The active ingredient of Ondansetron Injection, USP is ondansetron hydrochloride, a selective blocking agent of the serotonin 5-HT3 receptor type. Its chemical name is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula. The empirical formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.9 g/mol. Ondansetron HCl is a white to off-white powder that is soluble in water and normal saline. Each 1 mL of aqueous solution in the 2 mL single-dose vial contains 2 mg of ondansetron as the hydrochloride dihydrate; 9 mg of sodium chloride, USP; and 0.5 mg of citric acid monohydrate, USP and 0.25 mg of sodium citrate dihydrate, USP as buffers in Water for Injection, USP. Each 1 mL of aqueous solution in the 20 mL multi-dose vial contains 2 mg of ondansetron as the hydrochloride dihydrate; 8.3 mg of sodium chloride, USP; 0.5 mg of citric acid monohydrate, USP and 0.25 mg of sodium citrate dihydrate, USP as buffers; and 1.2 mg of methylparaben, NF and 0.15 mg of propylparaben, NF as preservatives in Water for Injection, USP. Ondansetron Injection, USP is a clear, colorless, nonpyrogenic, sterile solution for intravenous or intramuscular use. The pH of the injection solution is 3.3 to 4.0."
},
{
"NDCCode": "33261-548-30",
"PackageDescription": "30 TABLET in 1 BOTTLE, PLASTIC (33261-548-30)",
"NDC11Code": "33261-0548-30",
"ProductNDC": "33261-548",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lovastatin",
"NonProprietaryName": "Lovastatin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20021125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075991",
"LabelerName": "Aidarex Pharmaceuticals LLC",
"SubstanceName": "LOVASTATIN",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.",
"Description": "Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S -[1α(R *), 3α, 7β, 8β(2 S *,4 S *),8aβ]]-1,2,3, 7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H -pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24 H 36 O 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, pregelatinized cornstarch, sodium starch glycolate, butylated hydroxyaniso and talc. Butylated hydroxyanisole (BHA) is added as a preservative."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>80425-0548-8</NDCCode>
<PackageDescription>240 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (80425-0548-8) </PackageDescription>
<NDC11Code>80425-0548-08</NDC11Code>
<ProductNDC>80425-0548</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
<NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250827</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211825</ApplicationNumber>
<LabelerName>Advanced Rx of Tennessee, LLC</LabelerName>
<SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-12-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250827</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tramadol hydrochloride tablets are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration [see Warnings and Precautions ( 5.1)] , reserve tramadol hydrochloride tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated or are not expected to be tolerated., 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Tramadol hydrochloride tablets, USP for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride is (±) cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. The structural formula is:. The molecular weight of tramadol hydrochloride, USP is 299.98. Tramadol hydrochloride is a white or almost white, crystalline powder. It is freely soluble in water and in methanol, very slightly soluble in acetone and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride tablets, USP contain 50 mg of tramadol hydrochloride, USP and are pale yellow in color. Inactive ingredients in the tablet are colloidal silicon dioxide, croscarmellose sodium, hypromellose, iron oxide yellow, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>80425-0276-8</NDCCode>
<PackageDescription>240 TABLET, COATED in 1 BOTTLE (80425-0276-8) </PackageDescription>
<NDC11Code>80425-0276-08</NDC11Code>
<ProductNDC>80425-0276</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
<NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230217</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208708</ApplicationNumber>
<LabelerName>Advanced Rx Pharmacy of Tennessee, LLC</LabelerName>
<SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230331</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tramadol hydrochloride tablets, USP are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see WARNINGS AND PRECAUTIONS (5.1)] , reserve tramadol hydrochloride tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]: 1 Have not been tolerated or are not expected to be tolerated., 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Tramadol Hydrochloride Tablets, USP for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride is (±) cis-2-[(dimethylamino) methyl]-1-(3- methoxyphenyl) cyclohexanol hydrochloride. The structural formula is. The molecular weight of tramadol hydrochloride is 299.8. Tramadol hydrochloride is a white crystalline powder. It is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol Hydrochloride Tablets, USP 50 mg and Tramadol Hydrochloride Tablets, USP 100 mg contain 50 mg and 100 mg of tramadol hydrochloride respectively and are white in color. Inactive ingredients in the tablet are hypromellose, lactose anhydrous, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, pregelatinized starch,sodium starch glycolate and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>80425-0356-1</NDCCode>
<PackageDescription>5 PATCH in 1 POUCH (80425-0356-1) / 8.5 g in 1 PATCH</PackageDescription>
<NDC11Code>80425-0356-01</NDC11Code>
<ProductNDC>80425-0356</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nuvira</ProprietaryName>
<NonProprietaryName>Capsaicin 0.025%, Menthol 10%, Methyl Nicotinate 0.25%, Methyl Salicylate 10%</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20231016</StartMarketingDate>
<EndMarketingDate>20240331</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>505G(a)(3)</ApplicationNumber>
<LabelerName>Advanced Rx Pharmacy of Tennessee, LLC</LabelerName>
<SubstanceName>CAPSAICIN; MENTHOL; METHYL NICOTINATE; METHYL SALICYLATE</SubstanceName>
<StrengthNumber>.00025; .1; .0025; .1</StrengthNumber>
<StrengthUnit>g/g; g/g; g/g; g/g</StrengthUnit>
<Pharm_Classes>Nicotinic Acid [EPC], Nicotinic Acids [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20231016</StartMarketingDatePackage>
<EndMarketingDatePackage>20240331</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>80425-0367-1</NDCCode>
<PackageDescription>8 POUCH in 1 BOX (80425-0367-1) / 4 PATCH in 1 POUCH / 2.7 g in 1 PATCH</PackageDescription>
<NDC11Code>80425-0367-01</NDC11Code>
<ProductNDC>80425-0367</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Trubrexa</ProprietaryName>
<NonProprietaryName>Lidocaine And Capsaicin</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20231127</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Advanced Rx Pharmacy of Tennessee, LLC</LabelerName>
<SubstanceName>CAPSAICIN; LIDOCAINE</SubstanceName>
<StrengthNumber>.00025; .0475</StrengthNumber>
<StrengthUnit>g/g; g/g</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231127</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Trubrexa TMTransdermal Patch is indicated in adults over the age of 12 years old for the treatment of acute and chronic pain in muscles and joints associated with muscle soreness, strains, sprains, arthritis, simple backache, muscle stiffness, and more.</IndicationAndUsage>
<Description>Trubrexa TMTransdermal Patch is comprised of an adhesive material containing 4.75% lidocaine and 0.025% capsaicin. Each patch is 2 in x 2 in (5.08 cm x 5.08 cm) and consists of an adhesive side containing the active/inactive ingredients and an outer surface backing layer with breathable fabric. The adhesive side is covered with a removable, clear, unprinted, plastic film. The outer surface of the backing layer is imprinted with the Trubrexa TMTransdermal Patch logo. 4 patches are included in each pouch bag. The inactive ingredients include: Arnica, Magnesium, Polyacrylate, Vegan Glycerol, and Water. Trubrexa TMTransdermal Patch is Latex Free, Paraben Free, and Vegan.</Description>
</NDC>
<NDC>
<NDCCode>80425-0445-1</NDCCode>
<PackageDescription>1 KIT in 1 KIT (80425-0445-1) * 58.8 g in 1 BOTTLE, PLASTIC * 1.2 g in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>80425-0445-01</NDC11Code>
<ProductNDC>80425-0445</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20241017</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Advanced Rx Pharmacy of Tennessee, LLC</LabelerName>
<Status>Unfinished</Status>
<LastUpdate>2026-01-12</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>17-OCT-24</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>80425-0501-8</NDCCode>
<PackageDescription>240 TABLET, COATED in 1 BOTTLE (80425-0501-8) </PackageDescription>
<NDC11Code>80425-0501-08</NDC11Code>
<ProductNDC>80425-0501</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
<NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250213</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076003</ApplicationNumber>
<LabelerName>Advanced Rx of Tennessee, LLC</LabelerName>
<SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-02-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250213</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tramadol hydrochloride tablets are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration [see Warnings and Precautions (5.1)] , reserve tramadol hydrochloride tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or opioid combination products): : 1 Have not been tolerated or are not expected to be tolerated,, 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Tramadol hydrochloride tablets USP, for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride is (±) cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. The structural formula is:. The molecular weight of tramadol hydrochloride is 299.84. Tramadol hydrochloride, USP is a white or almost white crystalline powder. It is freely soluble in water and in methanol, very slightly soluble in acetone and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride tablets, USP contain 50 mg of tramadol hydrochloride, USP and are white in color. Inactive ingredients in the tablet are hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, pregelatinized starch, sodium starch glycolate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>80425-0588-8</NDCCode>
<PackageDescription>240 TABLET in 1 BOTTLE (80425-0588-8) </PackageDescription>
<NDC11Code>80425-0588-08</NDC11Code>
<ProductNDC>80425-0588</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
<NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260626</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075968</ApplicationNumber>
<LabelerName>Advanced Rx of Tennessee, LLC</LabelerName>
<SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260626</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tramadol hydrochloride tablets are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions ( 5.1)] , reserve opioid analgesics, including tramadol hydrochloride tablets for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.</IndicationAndUsage>
<Description>Tramadol hydrochloride tablets, for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride is (±) cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. The structural formula is:. The molecular weight of tramadol hydrochloride is 299.84. Tramadol hydrochloride is a white, crystalline powder. It is freely soluble in water and in methanol, very slightly soluble in acetone and has a pKa of 9.41. Tramadol hydrochloride tablets contain 50 mg of tramadol hydrochloride (equivalent to 43.9 mg of tramadol) and are white in color. Inactive ingredients in the tablet are colloidal silicon dioxide, corn starch, lactose monohydrate, magnesium stearate, microcrystalline cellulose, opadry white, sodium starch glycolate. The opadry white contains HPMC 2910/Hypromellose 3 mPas and 6 mPas, Macrogol, Polysorbate 80 and Titanium Dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0548-5604-00</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (0548-5604-00) / .8 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00548-5604-00</NDC11Code>
<ProductNDC>0548-5604</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Enoxaparin Sodium</ProprietaryName>
<NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20110919</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076684</ApplicationNumber>
<LabelerName>Amphastar Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110919</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Enoxaparin Sodium Injection is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (MI) (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4).</IndicationAndUsage>
<Description>Enoxaparin Sodium Injection USP is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5.Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6 anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is.</Description>
</NDC>
<NDC>
<NDCCode>0548-5606-00</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (0548-5606-00) / .8 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00548-5606-00</NDC11Code>
<ProductNDC>0548-5606</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Enoxaparin Sodium</ProprietaryName>
<NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20110919</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076684</ApplicationNumber>
<LabelerName>Amphastar Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110919</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Enoxaparin Sodium Injection is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (MI) (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4).</IndicationAndUsage>
<Description>Enoxaparin Sodium Injection USP is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5.Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6 anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is.</Description>
</NDC>
<NDC>
<NDCCode>0548-5634-00</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (0548-5634-00) > .8 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00548-5634-00</NDC11Code>
<ProductNDC>0548-5634</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Enoxaparin Sodium</ProprietaryName>
<NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20110919</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076684</ApplicationNumber>
<LabelerName>Amphastar Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110919</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Enoxaparin Sodium Injection is a low molecular weight heparin [LMWH] indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction [MI] (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction [STEMI] managed medically or with subsequent percutaneous coronary intervention [PCI] (1.4) .</IndicationAndUsage>
<Description>Enoxaparin Sodium Injection is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains an 1,6 anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is.</Description>
</NDC>
<NDC>
<NDCCode>0548-5636-00</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (0548-5636-00) > .8 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00548-5636-00</NDC11Code>
<ProductNDC>0548-5636</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Enoxaparin Sodium</ProprietaryName>
<NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20110919</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076684</ApplicationNumber>
<LabelerName>Amphastar Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110919</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Enoxaparin Sodium Injection is a low molecular weight heparin [LMWH] indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction [MI] (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction [STEMI] managed medically or with subsequent percutaneous coronary intervention [PCI] (1.4) .</IndicationAndUsage>
<Description>Enoxaparin Sodium Injection is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains an 1,6 anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is.</Description>
</NDC>
<NDC>
<NDCCode>38779-0548-8</NDCCode>
<PackageDescription>500 g in 1 JAR (38779-0548-8) </PackageDescription>
<NDC11Code>38779-0548-08</NDC11Code>
<ProductNDC>38779-0548</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Naproxen</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20140711</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Medisca Inc.</LabelerName>
<SubstanceName>NAPROXEN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-11-21</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>22-JUN-17</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>51552-0548-8</NDCCode>
<PackageDescription>2500 g in 1 CONTAINER (51552-0548-8) </PackageDescription>
<NDC11Code>51552-0548-08</NDC11Code>
<ProductNDC>51552-0548</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Cellulose Microcrystalline</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20040102</StartMarketingDate>
<EndMarketingDate>20270215</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Fagron Inc</LabelerName>
<SubstanceName>CELLULOSE, MICROCRYSTALLINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2023-12-19</LastUpdate>
<StartMarketingDatePackage>02-JAN-04</StartMarketingDatePackage>
<EndMarketingDatePackage>15-FEB-27</EndMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>71335-0548-8</NDCCode>
<PackageDescription>14 TABLET, FILM COATED in 1 BOTTLE (71335-0548-8) </PackageDescription>
<NDC11Code>71335-0548-08</NDC11Code>
<ProductNDC>71335-0548</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Topiramate</ProprietaryName>
<NonProprietaryName>Topiramate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141215</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090278</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>TOPIRAMATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190123</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Topiramate is indicated for: 1 Epilepsy: initial monotherapy for the treatment of partial-onset or primary generalized tonic-clonic seizures in patients 2 years of age and older (1.1); adjunctive therapy for the treatment of partial-onset seizures, primary generalized tonic-clonic seizures, or seizures associated with Lennox- Gastaut syndrome in patients 2 years of age and older (1.2), 2 Preventive treatment of migraine in patients 12 years of age and older (1.3).</IndicationAndUsage>
<Description>Topiramate is a sulfamate-substituted monosaccharide. Topiramate tablets are available as 25 mg, 50 mg, 100 mg, and 200 mg round tablets for oral administration. Topiramate is a white crystalline powder with a bitter taste. Topiramate USP is most soluble in alkaline solutions containing sodium hydroxide or sodium phosphate and having a pH of 9 to 10. It is freely soluble in acetone, chloroform, dimethylsulfoxide, and ethanol. The solubility in water is 9.8 mg/mL. Its saturated solution has a pH of 6.3. Topiramate has the molecular formula C12H21NO8S and a molecular weight of 339.37. Topiramate is designated chemically as 2,3:4,5-Di-O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula: Topiramate tablets, USP contain the following inactive ingredients: anhydrous lactose, microcrystalline cellulose, pregelatinized maize starch, sodium starch glycolate type A potato, magnesium stearate, polyvinyl alcohol, titanium dioxide, polyethylene glycol and talc. In addition, individual tablets contain: 50 mg tablets: iron oxide yellow 100 mg tablets: iron oxide yellow, and D&C Yellow # 10 Aluminum Lake 200 mg tablets: iron oxide red, lecithin (soya), and iron oxide black.</Description>
</NDC>
<NDC>
<NDCCode>80425-0548-1</NDCCode>
<PackageDescription>15 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (80425-0548-1) </PackageDescription>
<NDC11Code>80425-0548-01</NDC11Code>
<ProductNDC>80425-0548</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
<NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250827</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211825</ApplicationNumber>
<LabelerName>Advanced Rx of Tennessee, LLC</LabelerName>
<SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-12-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250827</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tramadol hydrochloride tablets are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration [see Warnings and Precautions ( 5.1)] , reserve tramadol hydrochloride tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated or are not expected to be tolerated., 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Tramadol hydrochloride tablets, USP for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride is (±) cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. The structural formula is:. The molecular weight of tramadol hydrochloride, USP is 299.98. Tramadol hydrochloride is a white or almost white, crystalline powder. It is freely soluble in water and in methanol, very slightly soluble in acetone and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride tablets, USP contain 50 mg of tramadol hydrochloride, USP and are pale yellow in color. Inactive ingredients in the tablet are colloidal silicon dioxide, croscarmellose sodium, hypromellose, iron oxide yellow, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>80425-0548-2</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (80425-0548-2) </PackageDescription>
<NDC11Code>80425-0548-02</NDC11Code>
<ProductNDC>80425-0548</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
<NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250827</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211825</ApplicationNumber>
<LabelerName>Advanced Rx of Tennessee, LLC</LabelerName>
<SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-12-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250827</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tramadol hydrochloride tablets are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration [see Warnings and Precautions ( 5.1)] , reserve tramadol hydrochloride tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated or are not expected to be tolerated., 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Tramadol hydrochloride tablets, USP for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride is (±) cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. The structural formula is:. The molecular weight of tramadol hydrochloride, USP is 299.98. Tramadol hydrochloride is a white or almost white, crystalline powder. It is freely soluble in water and in methanol, very slightly soluble in acetone and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride tablets, USP contain 50 mg of tramadol hydrochloride, USP and are pale yellow in color. Inactive ingredients in the tablet are colloidal silicon dioxide, croscarmellose sodium, hypromellose, iron oxide yellow, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>80425-0548-3</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (80425-0548-3) </PackageDescription>
<NDC11Code>80425-0548-03</NDC11Code>
<ProductNDC>80425-0548</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
<NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250827</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211825</ApplicationNumber>
<LabelerName>Advanced Rx of Tennessee, LLC</LabelerName>
<SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-12-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250827</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tramadol hydrochloride tablets are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration [see Warnings and Precautions ( 5.1)] , reserve tramadol hydrochloride tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated or are not expected to be tolerated., 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Tramadol hydrochloride tablets, USP for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride is (±) cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. The structural formula is:. The molecular weight of tramadol hydrochloride, USP is 299.98. Tramadol hydrochloride is a white or almost white, crystalline powder. It is freely soluble in water and in methanol, very slightly soluble in acetone and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride tablets, USP contain 50 mg of tramadol hydrochloride, USP and are pale yellow in color. Inactive ingredients in the tablet are colloidal silicon dioxide, croscarmellose sodium, hypromellose, iron oxide yellow, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>80425-0548-4</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (80425-0548-4) </PackageDescription>
<NDC11Code>80425-0548-04</NDC11Code>
<ProductNDC>80425-0548</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
<NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250827</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211825</ApplicationNumber>
<LabelerName>Advanced Rx of Tennessee, LLC</LabelerName>
<SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-12-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250827</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tramadol hydrochloride tablets are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration [see Warnings and Precautions ( 5.1)] , reserve tramadol hydrochloride tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated or are not expected to be tolerated., 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Tramadol hydrochloride tablets, USP for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride is (±) cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. The structural formula is:. The molecular weight of tramadol hydrochloride, USP is 299.98. Tramadol hydrochloride is a white or almost white, crystalline powder. It is freely soluble in water and in methanol, very slightly soluble in acetone and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride tablets, USP contain 50 mg of tramadol hydrochloride, USP and are pale yellow in color. Inactive ingredients in the tablet are colloidal silicon dioxide, croscarmellose sodium, hypromellose, iron oxide yellow, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>80425-0548-5</NDCCode>
<PackageDescription>120 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (80425-0548-5) </PackageDescription>
<NDC11Code>80425-0548-05</NDC11Code>
<ProductNDC>80425-0548</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
<NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250827</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211825</ApplicationNumber>
<LabelerName>Advanced Rx of Tennessee, LLC</LabelerName>
<SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-12-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250827</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tramadol hydrochloride tablets are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration [see Warnings and Precautions ( 5.1)] , reserve tramadol hydrochloride tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated or are not expected to be tolerated., 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Tramadol hydrochloride tablets, USP for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride is (±) cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. The structural formula is:. The molecular weight of tramadol hydrochloride, USP is 299.98. Tramadol hydrochloride is a white or almost white, crystalline powder. It is freely soluble in water and in methanol, very slightly soluble in acetone and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride tablets, USP contain 50 mg of tramadol hydrochloride, USP and are pale yellow in color. Inactive ingredients in the tablet are colloidal silicon dioxide, croscarmellose sodium, hypromellose, iron oxide yellow, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>80425-0548-6</NDCCode>
<PackageDescription>40 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (80425-0548-6) </PackageDescription>
<NDC11Code>80425-0548-06</NDC11Code>
<ProductNDC>80425-0548</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
<NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250827</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211825</ApplicationNumber>
<LabelerName>Advanced Rx of Tennessee, LLC</LabelerName>
<SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-12-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250827</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tramadol hydrochloride tablets are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration [see Warnings and Precautions ( 5.1)] , reserve tramadol hydrochloride tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated or are not expected to be tolerated., 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Tramadol hydrochloride tablets, USP for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride is (±) cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. The structural formula is:. The molecular weight of tramadol hydrochloride, USP is 299.98. Tramadol hydrochloride is a white or almost white, crystalline powder. It is freely soluble in water and in methanol, very slightly soluble in acetone and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride tablets, USP contain 50 mg of tramadol hydrochloride, USP and are pale yellow in color. Inactive ingredients in the tablet are colloidal silicon dioxide, croscarmellose sodium, hypromellose, iron oxide yellow, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>80425-0548-7</NDCCode>
<PackageDescription>180 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (80425-0548-7) </PackageDescription>
<NDC11Code>80425-0548-07</NDC11Code>
<ProductNDC>80425-0548</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
<NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250827</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211825</ApplicationNumber>
<LabelerName>Advanced Rx of Tennessee, LLC</LabelerName>
<SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-12-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250827</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tramadol hydrochloride tablets are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration [see Warnings and Precautions ( 5.1)] , reserve tramadol hydrochloride tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated or are not expected to be tolerated., 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Tramadol hydrochloride tablets, USP for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride is (±) cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. The structural formula is:. The molecular weight of tramadol hydrochloride, USP is 299.98. Tramadol hydrochloride is a white or almost white, crystalline powder. It is freely soluble in water and in methanol, very slightly soluble in acetone and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride tablets, USP contain 50 mg of tramadol hydrochloride, USP and are pale yellow in color. Inactive ingredients in the tablet are colloidal silicon dioxide, croscarmellose sodium, hypromellose, iron oxide yellow, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0548-2311-00</NDCCode>
<PackageDescription>1 SYRINGE in 1 CARTON (0548-2311-00) / 2.24 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00548-2311-00</NDC11Code>
<ProductNDC>0548-2311</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Teriparatide</ProprietaryName>
<NonProprietaryName>Teriparatide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20251222</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213641</ApplicationNumber>
<LabelerName>Amphastar Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>TERIPARATIDE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Parathyroid Hormone Analog [EPC], Parathyroid Hormone [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Teriparatide injection is indicated: 1 For the treatment of postmenopausal women with osteoporosis at high risk for fracture (defined herein as having a history of osteoporotic fracture or multiple risk factors for fracture) or who have failed or are intolerant to other available osteoporosis therapy. In postmenopausal women with osteoporosis, Teriparatide injection reduces the risk of vertebral and nonvertebral fractures., 2 To increase bone mass in men with primary or hypogonadal osteoporosis at high risk for fracture or who have failed or are intolerant to other available osteoporosis therapy., 3 For the treatment of men and women with osteoporosis associated with sustained systemic glucocorticoid therapy (daily dosage equivalent to 5 mg or greater of prednisone) at high risk for fracture or who have failed or are intolerant to other available osteoporosis therapy.</IndicationAndUsage>
<Description>Teriparatide injection is a synthetic parathyroid hormone analog (PTH 1-34). It has an identical sequence to the 34 N-terminal amino acids (the biologically active region) of the 84-amino acid human parathyroid hormone. The molecular formula of teriparatide is C181H291N55O51S2 and molecular weight is 4117.8 daltons. Its amino acid sequence is shown below. Teriparatide is manufactured using synthetic technology. Teriparatide injection is supplied as a sterile, colorless, clear, isotonic solution in a glass cartridge which is pre-assembled into a single-patient-use delivery device (pen) for subcutaneous injection. Each delivery device (pen) is filled with volume to allow delivery of 2.24 mL. Each mL contains 250 mcg of teriparatide (as a free base), 0.41 mg of glacial acetic acid, 0.1 mg of sodium acetate (anhydrous), 45.4 mg of mannitol, 3 mg of Metacresol, and Water for Injection. In addition, hydrochloric acid solution 10% and/or sodium hydroxide solution 10% may have been added to adjust the pH to 4. Each prefilled delivery device (pen) delivers 20 mcg of teriparatide per dose for up to 28 days. Each device contains additional volume to allow troubleshooting of the device 2 times.</Description>
</NDC>
<NDC>
<NDCCode>0548-5001-00</NDCCode>
<PackageDescription>1 SYRINGE in 1 CARTON (0548-5001-00) > .5 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00548-5001-00</NDC11Code>
<ProductNDC>0548-5001</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ganirelix Acetate</ProprietaryName>
<NonProprietaryName>Ganirelix Acetate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20220620</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212613</ApplicationNumber>
<LabelerName>Amphastar Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>GANIRELIX ACETATE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>ug/.5mL</StrengthUnit>
<Pharm_Classes>Decreased GnRH Secretion [PE], Gonadotropin Releasing Hormone Receptor Antagonist [EPC], Gonadotropin Releasing Hormone Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-06-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220620</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ganirelix Acetate Injection is indicated for the inhibition of premature LH surges in women undergoing controlled ovarian hyperstimulation.</IndicationAndUsage>
<Description>Ganirelix Acetate Injection is a synthetic decapeptide with high antagonistic activity against naturally occurring gonadotropin-releasing hormone (GnRH). Ganirelix Acetate is derived from native GnRH with substitutions of amino acids at positions 1, 2, 3, 6, 8, and 10 to form the following molecular formula of the peptide: N-acetyl-3-(2-naphthyl)-D-alanyl-4-chloro-D-phenylalanyl-3-(3-pyridyl)-D-alanyl-L-seryl-L-tyrosyl-N9,N10-diethyl-D-homoarginyl-L-leucyl-N9,N10-diethyl-L-homoarginyl-L-prolyl-D-alanylamide acetate. The molecular weight for Ganirelix Acetate is 1570.4 as an anhydrous free base. The structural formula is as follows. Ganirelix Acetate. Ganirelix Acetate Injection is supplied as a colorless, sterile, ready-to-use, aqueous solution intended for SUBCUTANEOUS administration only. Each single dose, sterile, prefilled syringe contains 250 mcg/0.5 mL of Ganirelix Acetate, 0.1 mg glacial acetic acid, 23.5 mg mannitol, and water for injection adjusted to pH 5.0 with acetic acid, NF and/or sodium hydroxide, NF.</Description>
</NDC>
<NDC>
<NDCCode>0548-5850-00</NDCCode>
<PackageDescription>1 KIT in 1 KIT (0548-5850-00) * 1 mL in 1 VIAL (0548-5905-00) * 1 mL in 1 SYRINGE (0548-5831-00) </PackageDescription>
<NDC11Code>00548-5850-00</NDC11Code>
<ProductNDC>0548-5850</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glucagon</ProprietaryName>
<NonProprietaryName>Glucagon</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20210210</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208086</ApplicationNumber>
<LabelerName>Amphastar Pharmaceuticals, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-08-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210210</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>GLUCAGON for Injection is an antihypoglycemic agent and a gastrointestinal motility inhibitor indicated: 1 for the treatment of severe hypoglycemia in pediatric and adult patients with diabetes. (1.1), 2 as a diagnostic aid for use during radiologic examinations to temporarily inhibit movement of the gastrointestinal tract in adult patients. (1.2).</IndicationAndUsage>
<Description>Glucagon is an antihypoglycemic agent and a gastrointestinal motility inhibitor. Glucagon is produced by solid state peptide synthesis and is highly purified. The chemical structure of the glucagon is identical to human glucagon. Glucagon is a single-chain polypeptide that contains 29 amino acid residues and has a molecular weight of 3483 Daltons.The empirical formula is C153H225N43O49S. The primary sequence of glucagon is shown below. Crystalline glucagon (synthetic origin) is a white to off-white powder. It is relatively insoluble in water but is soluble at a pH of less than 3 or more than 9.5. Glucagon for Injection is a sterile lyophilized white to off white powder in a vial and a syringe of sterile diluent for intravenous, intramuscular, or subcutaneous use. The vial contains 1 mg of glucagon, 49 mg of lactose monohydrate. Hydrochloric acid may have been added during manufacture to adjust the pH of the glucagon to 2.5 to 3.0. One International Unit of glucagon is equivalent to 1 mg of glucagon. The 1-mL diluent syringe contains 12 mg of glycerin, 1 mg hydrochloric acid, and Water for Injection, at pH 1.8 to 2.2.</Description>
</NDC>
<NDC>
<NDCCode>0548-9090-10</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (0548-9090-10) / 1 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00548-9090-10</NDC11Code>
<ProductNDC>0548-9090</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amphadase</ProprietaryName>
<NonProprietaryName>Hyaluronidase</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20041026</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA021665</ApplicationNumber>
<LabelerName>Amphastar Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>HYALURONIDASE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>[USP'U]/mL</StrengthUnit>
<Pharm_Classes>Endoglycosidase [EPC], Glycoside Hydrolases [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-09-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20041026</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Hyaluronidase is an endoglycosidase. It is a preparation of purified bovine testicular hyaluronidase, a protein enzyme. Hyaluronidase is composed of two major glycosylated forms, α and β. The exact chemical structure of this enzyme is unknown. Amphadase® (hyaluronidase injection) is supplied as a sterile, clear and colorless, ready for use 1 mL solution in a single-dose vial for infiltration use, for interstitial use, for intramuscular use, for peribulbar use, for soft tissue use, or for subcutaneous use. Each mL contains 150 USP units of hyaluronidase with calcium chloride (0.4 mg), edetate disodium (1.0 mg), monobasic sodium phosphate (1.7 mg), sodium chloride (8.5 mg), not more than 0.1 mg thimerosal (mercury derivative), and Water for Injection, USP. Sodium hydroxide may be added to adjust pH. Amphadase® has an approximate pH of 6.8 and an osmolality of 295 to 355 mOsm.</Description>
</NDC>
<NDC>
<NDCCode>13668-548-94</NDCCode>
<PackageDescription>30 GRANULE, DELAYED RELEASE in 1 CARTON (13668-548-94) </PackageDescription>
<NDC11Code>13668-0548-94</NDC11Code>
<ProductNDC>13668-548</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Esomeprazole Magnesium</ProprietaryName>
<ProprietaryNameSuffix>For Delayed-release Oral Suspension</ProprietaryNameSuffix>
<NonProprietaryName>Esomeprazole Magnesium</NonProprietaryName>
<DosageFormName>GRANULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250305</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212652</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>ESOMEPRAZOLE MAGNESIUM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250305</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Esomeprazole magnesium for delayed-release oral suspension is a proton pump inhibitor (PPI). Esomeprazole magnesium for delayed-release oral suspension is indicated for the: 1 Short-term treatment in the healing of erosive esophagitis (EE) in adults and pediatric patients 12 years to 17 years of age. (1.1), 2 Maintenance of healing of EE in adults. (1.2), 3 Short-term treatment of heartburn and other symptoms associated GERD in adults and pediatric patients 12 years to 17 years of age. (1.3), 4 Risk reduction of nonsteroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults at risk for developing gastric ulcers due to age (60 years and older) and/or documented history of gastric ulcers. (1.4), 5 Helicobacter pylori eradication in adult patients to reduce the risk of duodenal ulcer recurrence in combination with amoxicillin and clarithromycin. (1.5), 6 Long-term treatment of pathological hypersecretory conditions, including Zollinger-Ellison syndrome in adults. (1.6).</IndicationAndUsage>
<Description>The active ingredient in esomeprazole magnesium for delayed-release oral suspension is bis(5-methoxy-2-[(S)-[(4-methoxy-3,5-dimethyl-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole-1-yl) magnesium, a PPI. Esomeprazole is the S-isomer of omeprazole, which is a mixture of the S- and R- isomers. (Initial U.S. approval of esomeprazole magnesium: 2001). Its molecular formula is (C17H18N3O3S)2Mg with molecular weight of 713.1 on an anhydrous basis. The structural formula is. The magnesium salt is a white to slightly colored crystalline powder. The stability of esomeprazole magnesium USP is a function of pH; it rapidly degrades in acidic media, but it has acceptable stability under alkaline conditions. At pH 6.8 (buffer), the half-life of the magnesium salt is about 19 hours at 25°C and about 8 hours at 37°C. Esomeprazole magnesium for delayed-release oral suspension is supplied in packets. Each packet of esomeprazole magnesium for delayed-release oral suspension contains esomeprazole, in the form of enteric-coated pellets, and also inactive granules. : 1 10 mg esomeprazole (equivalent to 10.353 mg esomeprazole magnesium USP).</Description>
</NDC>
<NDC>
<NDCCode>21695-548-15</NDCCode>
<PackageDescription>15 mL in 1 BOTTLE (21695-548-15)</PackageDescription>
<NDC11Code>21695-0548-15</NDC11Code>
<ProductNDC>21695-548</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Azithromycin</ProprietaryName>
<NonProprietaryName>Azithromycin Monohydrate</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080624</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065419</ApplicationNumber>
<LabelerName>Rebel Distributors Corp.</LabelerName>
<SubstanceName>AZITHROMYCIN MONOHYDRATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC],Macrolides [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Azithromycin for oral suspension is indicated for the treatment of patients with mild to moderate infections (pneumonia: see WARNINGS) caused by susceptible strains of the designated microorganisms in the specific conditions listed below. As recommended dosages, durations of therapy and applicable patient populations vary among these infections, please see DOSAGE AND ADMINISTRATION for specific dosing recommendations.</IndicationAndUsage>
<Description>Azithromycin for oral suspension, USP contains the active ingredient azithromycin, an azalide, a subclass of macrolide antibiotics, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl)oxy]-2-ethyl-3,4,10 trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Azithromycin has the following structural formula. C38H72N2O12 M. W. 749.00. Azithromycin, as the monohydrate, is a white to off-white crystalline powder with a molecular formula of C38H72N2O12H2O and a molecular weight of 767.02. 5 mL of constituted suspension of azithromycin for oral suspension, 100 mg/5 mL and 200 mg/5 mL, contains 6 mg of sodium. Azithromycin for oral suspension, USP is supplied in bottles containing azithromycin monohydrate powder equivalent to 300 mg, 600 mg, 900 mg, or 1200 mg azithromycin per bottle and the following inactive ingredients: arabic gum, artificial aromatic substances, ethyl vanillin, FD&C Red #40, hydroxypropyl cellulose, maltodextrin, nature aromatic substances, nature identical aromatic substances, sucrose, tribasic sodium phosphate dodecahydrate, vanillin, and xanthan gum. After constitution, each 5 mL of suspension contains 100 mg or 200 mg of azithromycin. The dry powder before constitution is off-white to pinkish in color. The suspension after constitution is pink to red in color.</Description>
</NDC>
<NDC>
<NDCCode>23155-548-41</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (23155-548-41) / 2 mL in 1 VIAL (23155-548-31) </PackageDescription>
<NDC11Code>23155-0548-41</NDC11Code>
<ProductNDC>23155-548</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ondansetron</ProprietaryName>
<NonProprietaryName>Ondansetron</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20151109</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079224</ApplicationNumber>
<LabelerName>Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ONDANSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151109</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ondansetron Injection is a 5-HT3 receptor antagonist indicated for the prevention of: 1 nausea and vomiting associated with initial and repeat courses of emetogenic cancer chemotherapy. (1.1), 2 postoperative nausea and/or vomiting. (1.2).</IndicationAndUsage>
<Description>The active ingredient of Ondansetron Injection, USP is ondansetron hydrochloride, a selective blocking agent of the serotonin 5-HT3 receptor type. Its chemical name is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula. The empirical formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.9 g/mol. Ondansetron HCl is a white to off-white powder that is soluble in water and normal saline. Each 1 mL of aqueous solution in the 2 mL single-dose vial contains 2 mg of ondansetron as the hydrochloride dihydrate; 9 mg of sodium chloride, USP; and 0.5 mg of citric acid monohydrate, USP and 0.25 mg of sodium citrate dihydrate, USP as buffers in Water for Injection, USP. Each 1 mL of aqueous solution in the 20 mL multi-dose vial contains 2 mg of ondansetron as the hydrochloride dihydrate; 8.3 mg of sodium chloride, USP; 0.5 mg of citric acid monohydrate, USP and 0.25 mg of sodium citrate dihydrate, USP as buffers; and 1.2 mg of methylparaben, NF and 0.15 mg of propylparaben, NF as preservatives in Water for Injection, USP. Ondansetron Injection, USP is a clear, colorless, nonpyrogenic, sterile solution for intravenous or intramuscular use. The pH of the injection solution is 3.3 to 4.0.</Description>
</NDC>
<NDC>
<NDCCode>23155-548-42</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (23155-548-42) / 2 mL in 1 VIAL (23155-548-31) </PackageDescription>
<NDC11Code>23155-0548-42</NDC11Code>
<ProductNDC>23155-548</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ondansetron</ProprietaryName>
<NonProprietaryName>Ondansetron</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20151109</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079224</ApplicationNumber>
<LabelerName>Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ONDANSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151109</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ondansetron Injection is a 5-HT3 receptor antagonist indicated for the prevention of: 1 nausea and vomiting associated with initial and repeat courses of emetogenic cancer chemotherapy. (1.1), 2 postoperative nausea and/or vomiting. (1.2).</IndicationAndUsage>
<Description>The active ingredient of Ondansetron Injection, USP is ondansetron hydrochloride, a selective blocking agent of the serotonin 5-HT3 receptor type. Its chemical name is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula. The empirical formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.9 g/mol. Ondansetron HCl is a white to off-white powder that is soluble in water and normal saline. Each 1 mL of aqueous solution in the 2 mL single-dose vial contains 2 mg of ondansetron as the hydrochloride dihydrate; 9 mg of sodium chloride, USP; and 0.5 mg of citric acid monohydrate, USP and 0.25 mg of sodium citrate dihydrate, USP as buffers in Water for Injection, USP. Each 1 mL of aqueous solution in the 20 mL multi-dose vial contains 2 mg of ondansetron as the hydrochloride dihydrate; 8.3 mg of sodium chloride, USP; 0.5 mg of citric acid monohydrate, USP and 0.25 mg of sodium citrate dihydrate, USP as buffers; and 1.2 mg of methylparaben, NF and 0.15 mg of propylparaben, NF as preservatives in Water for Injection, USP. Ondansetron Injection, USP is a clear, colorless, nonpyrogenic, sterile solution for intravenous or intramuscular use. The pH of the injection solution is 3.3 to 4.0.</Description>
</NDC>
<NDC>
<NDCCode>33261-548-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (33261-548-30)</PackageDescription>
<NDC11Code>33261-0548-30</NDC11Code>
<ProductNDC>33261-548</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lovastatin</ProprietaryName>
<NonProprietaryName>Lovastatin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20021125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075991</ApplicationNumber>
<LabelerName>Aidarex Pharmaceuticals LLC</LabelerName>
<SubstanceName>LOVASTATIN</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.</IndicationAndUsage>
<Description>Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus. After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S -[1α(R *), 3α, 7β, 8β(2 S *,4 S *),8aβ]]-1,2,3, 7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H -pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24 H 36 O 5 and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, pregelatinized cornstarch, sodium starch glycolate, butylated hydroxyaniso and talc. Butylated hydroxyanisole (BHA) is added as a preservative.</Description>
</NDC>
</NDCList>