{
"NDC": [
{
"NDCCode": "80830-1691-9",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (80830-1691-9) / 15 mL in 1 VIAL, SINGLE-DOSE (80830-1691-3) ",
"NDC11Code": "80830-1691-09",
"ProductNDC": "80830-1691",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Phosphates",
"NonProprietaryName": "Potassium Phosphate, Monobasic Potassium Phosphate, Dibasic Injection,",
"DosageFormName": "SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250709",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216344",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "POTASSIUM PHOSPHATE, MONOBASIC; POTASSIUM PHOSPHATE, DIBASIC",
"StrengthNumber": "224; 236",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250709",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium phosphates injection is indicated as a source of phosphorus: : 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated. , 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated. .",
"Description": "Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile clear, colorless, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate, USP and dibasic potassium phosphate, USP in water for injection. It is supplied as a 15 mL single-dose vial. Monobasic potassium phosphate, USP is chemically designated potassium dihydrogen phosphate. The molecular formula is KH2PO4, molecular weight is 136.084 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water and practically insoluble in alcohol. Dibasic potassium phosphate, USP is chemically designated dipotassium hydrogen phosphate. The molecular formula is K2HPO4, molecular weight is 174.18 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water. Each mL of Potassium Phosphates Injection, USP contains monobasic potassium phosphate USP, 224 mg; dibasic potassium phosphate USP, 236 mg and water for injection. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route."
},
{
"NDCCode": "71335-1691-9",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (71335-1691-9) ",
"NDC11Code": "71335-1691-09",
"ProductNDC": "71335-1691",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ergocalciferol",
"NonProprietaryName": "Ergocalciferol Capsules,",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20181210",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204276",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ERGOCALCIFEROL",
"StrengthNumber": "1.25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Ergocalciferols [CS], Provitamin D2 Compound [EPC]",
"Status": "Active",
"LastUpdate": "2024-08-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200820",
"SamplePackage": "N",
"IndicationAndUsage": "Ergocalciferol Capsules are indicated for use in the treatment of hypoparathyroidism, refractory rickets, also known as vitamin D resistant rickets, and familial hypophosphatemia.",
"Description": "Ergocalciferol Capsules, USP is a synthetic calcium regulator for oral administration. Ergocalciferol is a white, colorless crystal, insoluble in water, soluble in organic solvents, and slightly soluble in vegetable oils. It is affected by air and by light. Ergosterol or provitamin D2 is found in plants and yeast and has no antirachitic activity. There are more than 10 substances belonging to a group of steroid compounds, classified as having vitamin D or antirachitic activity. One USP unit of vitamin D2 is equivalent to one International Unit (IU), and 1 mcg of vitamin D2 is equal to 40 IU. Each capsule contains 1.25 mg (50,000 International Units vitamin D) of ergocalciferol, USP, in an edible vegetable oil. Ergocalciferol, also called vitamin D2, is 9, 10-secoergosta-5, 7, 10(19), 22-tetraen-3-ol, (3ß, 5Z, 7E, 22E)-; (C28H44O) with a molecular weight of 396.65, and has the following structural formula. Inactive Ingredients: Butylated hydroxytoluene, D&C Yellow #10, FD&C Blue #1, Gelatin, Glycerin, Propylene Glycol, Shellac, Simethicone, Soybean oil and Titanium Dioxide."
},
{
"NDCCode": "80830-1691-2",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (80830-1691-2) / 15 mL in 1 VIAL, SINGLE-DOSE (80830-1691-1) ",
"NDC11Code": "80830-1691-02",
"ProductNDC": "80830-1691",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Phosphates",
"NonProprietaryName": "Potassium Phosphate, Monobasic Potassium Phosphate, Dibasic Injection,",
"DosageFormName": "SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20231023",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216344",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "POTASSIUM PHOSPHATE, MONOBASIC; POTASSIUM PHOSPHATE, DIBASIC",
"StrengthNumber": "224; 236",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231023",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium phosphates injection is indicated as a source of phosphorus: : 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated. , 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated. .",
"Description": "Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile clear, colorless, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate, USP and dibasic potassium phosphate, USP in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial. Monobasic potassium phosphate, USP is chemically designated potassium dihydrogen phosphate. The molecular formula is KH2PO4, molecular weight is 136.084 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water and practically insoluble in alcohol. Dibasic potassium phosphate, USP is chemically designated dipotassium hydrogen phosphate. The molecular formula is K2HPO4, molecular weight is 174.18 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water. Each mL of Potassium Phosphates Injection, USP contains monobasic potassium phosphate USP, 224 mg; dibasic potassium phosphate USP, 236 mg and water for injection. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route."
},
{
"NDCCode": "80830-1691-5",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (80830-1691-5) / 15 mL in 1 VIAL, SINGLE-DOSE (80830-1691-1) ",
"NDC11Code": "80830-1691-05",
"ProductNDC": "80830-1691",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Phosphates",
"NonProprietaryName": "Potassium Phosphate, Monobasic Potassium Phosphate, Dibasic Injection,",
"DosageFormName": "SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20231023",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216344",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "POTASSIUM PHOSPHATE, MONOBASIC; POTASSIUM PHOSPHATE, DIBASIC",
"StrengthNumber": "224; 236",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231023",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium phosphates injection is indicated as a source of phosphorus: : 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated. , 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated. .",
"Description": "Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile clear, colorless, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate, USP and dibasic potassium phosphate, USP in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial. Monobasic potassium phosphate, USP is chemically designated potassium dihydrogen phosphate. The molecular formula is KH2PO4, molecular weight is 136.084 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water and practically insoluble in alcohol. Dibasic potassium phosphate, USP is chemically designated dipotassium hydrogen phosphate. The molecular formula is K2HPO4, molecular weight is 174.18 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water. Each mL of Potassium Phosphates Injection, USP contains monobasic potassium phosphate USP, 224 mg; dibasic potassium phosphate USP, 236 mg and water for injection. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route."
},
{
"NDCCode": "80830-1691-7",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (80830-1691-7) / 15 mL in 1 VIAL, SINGLE-DOSE (80830-1691-6) ",
"NDC11Code": "80830-1691-07",
"ProductNDC": "80830-1691",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Phosphates",
"NonProprietaryName": "Potassium Phosphate, Monobasic Potassium Phosphate, Dibasic Injection,",
"DosageFormName": "SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250709",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216344",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "POTASSIUM PHOSPHATE, MONOBASIC; POTASSIUM PHOSPHATE, DIBASIC",
"StrengthNumber": "224; 236",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250709",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium phosphates injection is indicated as a source of phosphorus: : 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated. , 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated. .",
"Description": "Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile clear, colorless, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate, USP and dibasic potassium phosphate, USP in water for injection. It is supplied as a 15 mL single-dose vial. Monobasic potassium phosphate, USP is chemically designated potassium dihydrogen phosphate. The molecular formula is KH2PO4, molecular weight is 136.084 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water and practically insoluble in alcohol. Dibasic potassium phosphate, USP is chemically designated dipotassium hydrogen phosphate. The molecular formula is K2HPO4, molecular weight is 174.18 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water. Each mL of Potassium Phosphates Injection, USP contains monobasic potassium phosphate USP, 224 mg; dibasic potassium phosphate USP, 236 mg and water for injection. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route."
},
{
"NDCCode": "80830-2362-9",
"PackageDescription": "24 POUCH in 1 CARTON (80830-2362-9) / 1 BAG in 1 POUCH / 50 mL in 1 BAG",
"NDC11Code": "80830-2362-09",
"ProductNDC": "80830-2362",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Calcium Gluconate",
"NonProprietaryName": "Calcium Gluconate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230908",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217174",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "CALCIUM GLUCONATE MONOHYDRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2025-05-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230908",
"SamplePackage": "N",
"IndicationAndUsage": "Calcium gluconate in sodium chloride injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.",
"Description": "Calcium gluconate in sodium chloride injection is a sterile, clear, colorless, preservative-free, nonpyrogenic, solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14 H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate in Sodium Chloride Injection is available as 1,000 mg per 50 mL (18.8 mg per mL) or 2,000 mg per 100 mL (18.8 mg per mL) filled in single-dose infusion bags. Each mL of calcium gluconate in sodium chloride injection contains 20 mg of calcium gluconate (equivalent to 18.8 mg of calcium gluconate and 0.9 mg of calcium saccharate tetrahydrate), 6.75 mg sodium chloride as tonicity adjustor, hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and water for injection. Each mL of calcium gluconate in sodium chloride injection contains 1.86 mg (0.093 mEq) of elemental calcium."
},
{
"NDCCode": "80830-2363-9",
"PackageDescription": "24 POUCH in 1 CARTON (80830-2363-9) / 1 BAG in 1 POUCH / 100 mL in 1 BAG",
"NDC11Code": "80830-2363-09",
"ProductNDC": "80830-2363",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Calcium Gluconate",
"NonProprietaryName": "Calcium Gluconate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230908",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217174",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "CALCIUM GLUCONATE MONOHYDRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2025-05-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230908",
"SamplePackage": "N",
"IndicationAndUsage": "Calcium gluconate in sodium chloride injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.",
"Description": "Calcium gluconate in sodium chloride injection is a sterile, clear, colorless, preservative-free, nonpyrogenic, solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14 H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate in Sodium Chloride Injection is available as 1,000 mg per 50 mL (18.8 mg per mL) or 2,000 mg per 100 mL (18.8 mg per mL) filled in single-dose infusion bags. Each mL of calcium gluconate in sodium chloride injection contains 20 mg of calcium gluconate (equivalent to 18.8 mg of calcium gluconate and 0.9 mg of calcium saccharate tetrahydrate), 6.75 mg sodium chloride as tonicity adjustor, hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and water for injection. Each mL of calcium gluconate in sodium chloride injection contains 1.86 mg (0.093 mEq) of elemental calcium."
},
{
"NDCCode": "80830-2465-9",
"PackageDescription": "24 POUCH in 1 CARTON (80830-2465-9) / 1 BAG in 1 POUCH (80830-2465-1) / 100 mL in 1 BAG",
"NDC11Code": "80830-2465-09",
"ProductNDC": "80830-2465",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metronidazole",
"NonProprietaryName": "Metronidazole",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230617",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217665",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "METRONIDAZOLE",
"StrengthNumber": "500",
"StrengthUnit": "mg/100mL",
"Pharm_Classes": "Nitroimidazole Antimicrobial [EPC], Nitroimidazoles [CS]",
"Status": "Active",
"LastUpdate": "2025-09-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230617",
"SamplePackage": "N",
"IndicationAndUsage": "Metronidazole injection is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Indicated surgical procedures should be performed in conjunction with metronidazole injection therapy. In a mixed aerobic and anaerobic infection, antibacterial drugs appropriate for the treatment of the aerobic infection should be used in addition to metronidazole injection. Metronidazole injection is effective in Bacteroides fragilis infections resistant to clindamycin, chloramphenicol and penicillin. : 1 Intra-Abdominal Infections, including peritonitis, intra-abdominal abscess and liver abscess, caused by Bacteroides species including the B. fragilis group (B. fragilis, B. distasonis, B. ovatus, B. thetaiotaomicron, B. vulgatus), Clostridium species, Eubacterium species, Peptococcus species and Peptostreptococcus species in adults and pediatric patients less than 4 months of age. .",
"Description": "Metronidazole injection, USP, is a parenteral formulation of the synthetic nitroimidazole antibacterial agent 2-methyl-5-nitro-1H-imidazole-1-ethanol. Metronidazole injection USP, 500 mg/100 mL (5 mg/mL) is a sterile, clear, colorless to pale yellow color, nonpyrogenic, iso-osmotic, buffered solution supplied in 100 mL single-dose non-PVC plastic container. Each 100 mL contains 500 mg metronidazole, USP; 790 mg sodium chloride, USP; 47.6 mg dibasic sodium phosphate dried, USP; and 22.9 mg citric acid anhydrous, USP. Metronidazole injection, USP has an osmolarity of 308.66 mOsmol/L (calc) and a pH of 5.5 (4.5 to 7.0). Each container contains 14 mEq of sodium."
},
{
"NDCCode": "80830-1659-2",
"PackageDescription": "25 VIAL, GLASS in 1 CARTON (80830-1659-2) / 1 mL in 1 VIAL, GLASS (80830-1659-1) ",
"NDC11Code": "80830-1659-02",
"ProductNDC": "80830-1659",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Epinephrine",
"NonProprietaryName": "Epinephrine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20251208",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218208",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "EPINEPHRINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251208",
"SamplePackage": "N",
"IndicationAndUsage": "Epinephrine is a non-selective alpha and beta adrenergic agonist indicated for: 1 Emergency treatment of allergic reactions (Type 1), including anaphylaxis. (1.1), 2 To increase mean arterial blood pressure in adult patients with hypotension associated with septic shock. (1.2).",
"Description": "Epinephrine Injection, USP is a clear, colorless, sterile solution containing 1 mg/mL epinephrine USP, packaged as 1 mL of solution in a single-dose clear glass vial. In the 1 mL vial, each 1 mL of epinephrine injection, USP solution contains 1 mg epinephrine, USP; 9 mg sodium chloride; 1 mg sodium metabisulfite; hydrochloric acid to adjust pH and water for injection. The pH range is 2.2 to 5.0. Epinephrine is a sympathomimetic catecholamine. The chemical name of epinephrine is: 1,2-Benzenediol, 4-[1-hydroxy-2-(methylamino)ethyl]-,(R)- or (-)-3,4-Dihydroxy-α-[(methylamino)methyl]benzyl alcohol. Its chemical structure is. The molecular weight of epinephrine is 183.2 g/mol and molecular formula is C9H13NO3. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin."
},
{
"NDCCode": "80830-1672-2",
"PackageDescription": "10 VIAL in 1 CARTON (80830-1672-2) / 10 mL in 1 VIAL (80830-1672-1) ",
"NDC11Code": "80830-1672-02",
"ProductNDC": "80830-1672",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Calcium Gluconate",
"NonProprietaryName": "Calcium Gluconate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240513",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216611",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "CALCIUM GLUCONATE MONOHYDRATE",
"StrengthNumber": "98",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240513",
"SamplePackage": "N",
"IndicationAndUsage": "Calcium gluconate injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.",
"Description": "Calcium gluconate injection USP, 100 mg per mL is a sterile, clear, colorless to slightly yellow, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of calcium gluconate injection, USP contains: 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of calcium gluconate injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium."
},
{
"NDCCode": "80830-1672-4",
"PackageDescription": "10 VIAL in 1 CARTON (80830-1672-4) / 10 mL in 1 VIAL",
"NDC11Code": "80830-1672-04",
"ProductNDC": "80830-1672",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Calcium Gluconate",
"NonProprietaryName": "Calcium Gluconate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260413",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216611",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "CALCIUM GLUCONATE MONOHYDRATE",
"StrengthNumber": "98",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260413",
"SamplePackage": "N",
"IndicationAndUsage": "Calcium gluconate injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.",
"Description": "Calcium gluconate injection USP, 100 mg per mL is a sterile, clear, colorless to slightly yellow, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of calcium gluconate injection, USP contains: 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of calcium gluconate injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium."
},
{
"NDCCode": "80830-1672-5",
"PackageDescription": "25 VIAL in 1 CARTON (80830-1672-5) / 10 mL in 1 VIAL (80830-1672-1) ",
"NDC11Code": "80830-1672-05",
"ProductNDC": "80830-1672",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Calcium Gluconate",
"NonProprietaryName": "Calcium Gluconate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240513",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216611",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "CALCIUM GLUCONATE MONOHYDRATE",
"StrengthNumber": "98",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240513",
"SamplePackage": "N",
"IndicationAndUsage": "Calcium gluconate injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.",
"Description": "Calcium gluconate injection USP, 100 mg per mL is a sterile, clear, colorless to slightly yellow, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of calcium gluconate injection, USP contains: 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of calcium gluconate injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium."
},
{
"NDCCode": "80830-1673-2",
"PackageDescription": "10 VIAL in 1 CARTON (80830-1673-2) / 50 mL in 1 VIAL (80830-1673-1) ",
"NDC11Code": "80830-1673-02",
"ProductNDC": "80830-1673",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Calcium Gluconate",
"NonProprietaryName": "Calcium Gluconate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240513",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216611",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "CALCIUM GLUCONATE MONOHYDRATE",
"StrengthNumber": "98",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240513",
"SamplePackage": "N",
"IndicationAndUsage": "Calcium gluconate injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.",
"Description": "Calcium gluconate injection USP, 100 mg per mL is a sterile, clear, colorless to slightly yellow, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of calcium gluconate injection, USP contains: 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of calcium gluconate injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium."
},
{
"NDCCode": "80830-1673-4",
"PackageDescription": "10 VIAL in 1 CARTON (80830-1673-4) / 50 mL in 1 VIAL",
"NDC11Code": "80830-1673-04",
"ProductNDC": "80830-1673",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Calcium Gluconate",
"NonProprietaryName": "Calcium Gluconate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260413",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216611",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "CALCIUM GLUCONATE MONOHYDRATE",
"StrengthNumber": "98",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260413",
"SamplePackage": "N",
"IndicationAndUsage": "Calcium gluconate injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.",
"Description": "Calcium gluconate injection USP, 100 mg per mL is a sterile, clear, colorless to slightly yellow, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of calcium gluconate injection, USP contains: 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of calcium gluconate injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium."
},
{
"NDCCode": "80830-1673-5",
"PackageDescription": "25 VIAL in 1 CARTON (80830-1673-5) / 50 mL in 1 VIAL (80830-1673-1) ",
"NDC11Code": "80830-1673-05",
"ProductNDC": "80830-1673",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Calcium Gluconate",
"NonProprietaryName": "Calcium Gluconate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240513",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216611",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "CALCIUM GLUCONATE MONOHYDRATE",
"StrengthNumber": "98",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240513",
"SamplePackage": "N",
"IndicationAndUsage": "Calcium gluconate injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.",
"Description": "Calcium gluconate injection USP, 100 mg per mL is a sterile, clear, colorless to slightly yellow, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of calcium gluconate injection, USP contains: 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of calcium gluconate injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium."
},
{
"NDCCode": "80830-1674-2",
"PackageDescription": "10 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (80830-1674-2) / 100 mL in 1 VIAL, PHARMACY BULK PACKAGE (80830-1674-8) ",
"NDC11Code": "80830-1674-02",
"ProductNDC": "80830-1674",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Calcium Gluconate",
"NonProprietaryName": "Calcium Gluconate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240513",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216611",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "CALCIUM GLUCONATE MONOHYDRATE",
"StrengthNumber": "98",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240513",
"SamplePackage": "N",
"IndicationAndUsage": "Calcium gluconate injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.",
"Description": "Calcium gluconate injection USP, 100 mg per mL is a sterile, clear, colorless to slightly yellow, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of calcium gluconate injection, USP contains: 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of calcium gluconate injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium."
},
{
"NDCCode": "80830-1674-3",
"PackageDescription": "10 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (80830-1674-3) / 100 mL in 1 VIAL, PHARMACY BULK PACKAGE",
"NDC11Code": "80830-1674-03",
"ProductNDC": "80830-1674",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Calcium Gluconate",
"NonProprietaryName": "Calcium Gluconate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260413",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216611",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "CALCIUM GLUCONATE MONOHYDRATE",
"StrengthNumber": "98",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260413",
"SamplePackage": "N",
"IndicationAndUsage": "Calcium gluconate injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.",
"Description": "Calcium gluconate injection USP, 100 mg per mL is a sterile, clear, colorless to slightly yellow, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of calcium gluconate injection, USP contains: 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of calcium gluconate injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium."
},
{
"NDCCode": "80830-1674-5",
"PackageDescription": "25 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (80830-1674-5) / 100 mL in 1 VIAL, PHARMACY BULK PACKAGE (80830-1674-8) ",
"NDC11Code": "80830-1674-05",
"ProductNDC": "80830-1674",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Calcium Gluconate",
"NonProprietaryName": "Calcium Gluconate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240513",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216611",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "CALCIUM GLUCONATE MONOHYDRATE",
"StrengthNumber": "98",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240513",
"SamplePackage": "N",
"IndicationAndUsage": "Calcium gluconate injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.",
"Description": "Calcium gluconate injection USP, 100 mg per mL is a sterile, clear, colorless to slightly yellow, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of calcium gluconate injection, USP contains: 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of calcium gluconate injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium."
},
{
"NDCCode": "80830-2301-5",
"PackageDescription": "25 VIAL in 1 CARTON (80830-2301-5) / 10 mL in 1 VIAL (80830-2301-1) ",
"NDC11Code": "80830-2301-05",
"ProductNDC": "80830-2301",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cupric Chloride",
"NonProprietaryName": "Cupric Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217287",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "CUPRIC CHLORIDE",
"StrengthNumber": ".4",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2026-02-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260129",
"SamplePackage": "N",
"IndicationAndUsage": "Cupric chloride injection is indicated for use as a supplement to intravenous solutions given for TPN. Administration helps to maintain copper serum levels and to prevent depletion of endogenous stores and subsequent deficiency symptoms.",
"Description": "Cupric chloride injection USP, 0.4 mg/mL is a sterile, clear, colorless to light blue color, nonpyrogenic solution intended for use as an additive to intravenous solutions for total parenteral nutrition (TPN). Each mL of solution contains 1.07 mg cupric chloride dihydrate; 9 mg sodium chloride and water for injection. The solution contains no bacteriostat, antimicrobial agent or added buffer. The pH is 2.0 (1.5 to 2.5); product may contain hydrochloric acid and sodium hydroxide for pH adjustment. The osmolarity is 0.327 mOsmol/mL (calc.). Cupric chloride, USP is chemically designated cupric chloride, dihydrate. Its molecular weight is 170.48 g/mol. The molecular formula is CuCl2 2H2O and the structural formula is. Cupric chloride, USP is a blue to blue-green crystalline compound freely soluble in water, soluble in alcohol and slightly soluble in ether. Sodium chloride, USP is chemically designated NaCl, a white crystalline compound freely soluble in water. The semi-rigid vial is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The small amount of water vapor that can pass through the plastic container wall will not significantly alter the drug concentration."
},
{
"NDCCode": "80830-2362-2",
"PackageDescription": "12 POUCH in 1 CARTON (80830-2362-2) / 1 BAG in 1 POUCH / 50 mL in 1 BAG",
"NDC11Code": "80830-2362-02",
"ProductNDC": "80830-2362",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Calcium Gluconate",
"NonProprietaryName": "Calcium Gluconate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230908",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217174",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "CALCIUM GLUCONATE MONOHYDRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2025-05-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231108",
"SamplePackage": "N",
"IndicationAndUsage": "Calcium gluconate in sodium chloride injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.",
"Description": "Calcium gluconate in sodium chloride injection is a sterile, clear, colorless, preservative-free, nonpyrogenic, solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14 H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate in Sodium Chloride Injection is available as 1,000 mg per 50 mL (18.8 mg per mL) or 2,000 mg per 100 mL (18.8 mg per mL) filled in single-dose infusion bags. Each mL of calcium gluconate in sodium chloride injection contains 20 mg of calcium gluconate (equivalent to 18.8 mg of calcium gluconate and 0.9 mg of calcium saccharate tetrahydrate), 6.75 mg sodium chloride as tonicity adjustor, hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and water for injection. Each mL of calcium gluconate in sodium chloride injection contains 1.86 mg (0.093 mEq) of elemental calcium."
},
{
"NDCCode": "80830-2363-2",
"PackageDescription": "12 POUCH in 1 CARTON (80830-2363-2) / 1 BAG in 1 POUCH / 100 mL in 1 BAG",
"NDC11Code": "80830-2363-02",
"ProductNDC": "80830-2363",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Calcium Gluconate",
"NonProprietaryName": "Calcium Gluconate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230908",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217174",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "CALCIUM GLUCONATE MONOHYDRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2025-05-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231108",
"SamplePackage": "N",
"IndicationAndUsage": "Calcium gluconate in sodium chloride injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.",
"Description": "Calcium gluconate in sodium chloride injection is a sterile, clear, colorless, preservative-free, nonpyrogenic, solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14 H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate in Sodium Chloride Injection is available as 1,000 mg per 50 mL (18.8 mg per mL) or 2,000 mg per 100 mL (18.8 mg per mL) filled in single-dose infusion bags. Each mL of calcium gluconate in sodium chloride injection contains 20 mg of calcium gluconate (equivalent to 18.8 mg of calcium gluconate and 0.9 mg of calcium saccharate tetrahydrate), 6.75 mg sodium chloride as tonicity adjustor, hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and water for injection. Each mL of calcium gluconate in sodium chloride injection contains 1.86 mg (0.093 mEq) of elemental calcium."
},
{
"NDCCode": "50090-1691-0",
"PackageDescription": "30 TABLET in 1 BOTTLE (50090-1691-0) ",
"NDC11Code": "50090-1691-00",
"ProductNDC": "50090-1691",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buspirone Hcl",
"NonProprietaryName": "Buspirone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20010328",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074253",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "BUSPIRONE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "Y",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, lll1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge”, irritability, impatience.",
"Description": "Buspirone hydrochloride is an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]-butyl]-8-azaspiro[4.5]decane-7,9- dione monohydrochloride. The empirical formula C21H31N5O2 HCl is represented by the following structural formula. Each tablet for oral administration containing 5 mg, 10 mg, or 15 mg of buspirone hydrochloride USP (equivalent to 4.6 mg, 9.1 mg, and 13.7 mg of buspirone free base respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablet is provided in a special tablet design. This tablet is scored so it can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate."
},
{
"NDCCode": "50090-1691-1",
"PackageDescription": "90 TABLET in 1 BOTTLE (50090-1691-1) ",
"NDC11Code": "50090-1691-01",
"ProductNDC": "50090-1691",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buspirone Hcl",
"NonProprietaryName": "Buspirone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20010328",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074253",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "BUSPIRONE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "Y",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, lll1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge”, irritability, impatience.",
"Description": "Buspirone hydrochloride is an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]-butyl]-8-azaspiro[4.5]decane-7,9- dione monohydrochloride. The empirical formula C21H31N5O2 HCl is represented by the following structural formula. Each tablet for oral administration containing 5 mg, 10 mg, or 15 mg of buspirone hydrochloride USP (equivalent to 4.6 mg, 9.1 mg, and 13.7 mg of buspirone free base respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablet is provided in a special tablet design. This tablet is scored so it can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate."
},
{
"NDCCode": "50090-1691-3",
"PackageDescription": "180 TABLET in 1 BOTTLE (50090-1691-3) ",
"NDC11Code": "50090-1691-03",
"ProductNDC": "50090-1691",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buspirone Hcl",
"NonProprietaryName": "Buspirone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20010328",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074253",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "BUSPIRONE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "Y",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, lll1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge”, irritability, impatience.",
"Description": "Buspirone hydrochloride is an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]-butyl]-8-azaspiro[4.5]decane-7,9- dione monohydrochloride. The empirical formula C21H31N5O2 HCl is represented by the following structural formula. Each tablet for oral administration containing 5 mg, 10 mg, or 15 mg of buspirone hydrochloride USP (equivalent to 4.6 mg, 9.1 mg, and 13.7 mg of buspirone free base respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablet is provided in a special tablet design. This tablet is scored so it can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate."
},
{
"NDCCode": "50090-1691-4",
"PackageDescription": "45 TABLET in 1 BOTTLE (50090-1691-4) ",
"NDC11Code": "50090-1691-04",
"ProductNDC": "50090-1691",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buspirone Hcl",
"NonProprietaryName": "Buspirone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20010328",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074253",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "BUSPIRONE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "Y",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, lll1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge”, irritability, impatience.",
"Description": "Buspirone hydrochloride is an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]-butyl]-8-azaspiro[4.5]decane-7,9- dione monohydrochloride. The empirical formula C21H31N5O2 HCl is represented by the following structural formula. Each tablet for oral administration containing 5 mg, 10 mg, or 15 mg of buspirone hydrochloride USP (equivalent to 4.6 mg, 9.1 mg, and 13.7 mg of buspirone free base respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablet is provided in a special tablet design. This tablet is scored so it can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate."
},
{
"NDCCode": "50090-1691-5",
"PackageDescription": "60 TABLET in 1 BOTTLE (50090-1691-5) ",
"NDC11Code": "50090-1691-05",
"ProductNDC": "50090-1691",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buspirone Hcl",
"NonProprietaryName": "Buspirone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20010328",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074253",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "BUSPIRONE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "Y",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, lll1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge”, irritability, impatience.",
"Description": "Buspirone hydrochloride is an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]-butyl]-8-azaspiro[4.5]decane-7,9- dione monohydrochloride. The empirical formula C21H31N5O2 HCl is represented by the following structural formula. Each tablet for oral administration containing 5 mg, 10 mg, or 15 mg of buspirone hydrochloride USP (equivalent to 4.6 mg, 9.1 mg, and 13.7 mg of buspirone free base respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablet is provided in a special tablet design. This tablet is scored so it can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate."
},
{
"NDCCode": "67046-1691-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (67046-1691-3) ",
"NDC11Code": "67046-1691-03",
"ProductNDC": "67046-1691",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Topiramate",
"NonProprietaryName": "Topiramate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260803",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090162",
"LabelerName": "Coupler LLC",
"SubstanceName": "TOPIRAMATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2026-08-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260803",
"SamplePackage": "N",
"IndicationAndUsage": "Topiramate tablets are indicated for: 1 Epilepsy: initial monotherapy for the treatment of partial-onset or primary generalized tonic-clonic seizures in patients 2 years of age and older (1.1); adjunctive therapy for the treatment of partial-onset seizures, primary generalized tonic-clonic seizures, or seizures associated with Lennox-Gastaut syndrome in patients 2 years of age and older ( 1.2) , 2 Preventive treatment of migraine in patients 12 years of age and older ( 1.3) .",
"Description": "Topiramate, USP is a sulfamate-substituted monosaccharide. Topiramate tablets, USP are available as 25 mg, 50 mg, 100 mg, and 200 mg round shaped tablets for oral administration. Topiramate, USP is a white crystalline powder with a bitter taste. Topiramate, USP is most soluble in alkaline solutions containing sodium hydroxide or sodium phosphate and having a pH of 9 to 10. It is freely soluble in acetone, chloroform, dimethylsulfoxide, and ethanol. The solubility in water is 9.8 mg/mL. Its saturated solution has a pH of 6.3. Topiramate, USP has the molecular formula C 12H 21NO 8S and a molecular weight of 339.36. Topiramate, USP is designated chemically as 2,3:4,5-Di- O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula:. Topiramate tablets, USP contain the following inactive ingredients: lactose monohydrate, pregelatinized corn starch, microcrystalline cellulose, sodium starch glycolate Type A (Potato), magnesium stearate, hypromellose, polysorbate 80, polyethylene glycol, and titanium dioxide. In addition the 25 mg, 100 mg and 200 mg tablets also contain yellow iron oxide; the 25 mg and 100 mg tablets also contain red iron oxide."
},
{
"NDCCode": "71335-1691-0",
"PackageDescription": "45 CAPSULE in 1 BOTTLE (71335-1691-0) ",
"NDC11Code": "71335-1691-00",
"ProductNDC": "71335-1691",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ergocalciferol",
"NonProprietaryName": "Ergocalciferol Capsules,",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20181210",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204276",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ERGOCALCIFEROL",
"StrengthNumber": "1.25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Ergocalciferols [CS], Provitamin D2 Compound [EPC]",
"Status": "Active",
"LastUpdate": "2024-08-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200820",
"SamplePackage": "N",
"IndicationAndUsage": "Ergocalciferol Capsules are indicated for use in the treatment of hypoparathyroidism, refractory rickets, also known as vitamin D resistant rickets, and familial hypophosphatemia.",
"Description": "Ergocalciferol Capsules, USP is a synthetic calcium regulator for oral administration. Ergocalciferol is a white, colorless crystal, insoluble in water, soluble in organic solvents, and slightly soluble in vegetable oils. It is affected by air and by light. Ergosterol or provitamin D2 is found in plants and yeast and has no antirachitic activity. There are more than 10 substances belonging to a group of steroid compounds, classified as having vitamin D or antirachitic activity. One USP unit of vitamin D2 is equivalent to one International Unit (IU), and 1 mcg of vitamin D2 is equal to 40 IU. Each capsule contains 1.25 mg (50,000 International Units vitamin D) of ergocalciferol, USP, in an edible vegetable oil. Ergocalciferol, also called vitamin D2, is 9, 10-secoergosta-5, 7, 10(19), 22-tetraen-3-ol, (3ß, 5Z, 7E, 22E)-; (C28H44O) with a molecular weight of 396.65, and has the following structural formula. Inactive Ingredients: Butylated hydroxytoluene, D&C Yellow #10, FD&C Blue #1, Gelatin, Glycerin, Propylene Glycol, Shellac, Simethicone, Soybean oil and Titanium Dioxide."
},
{
"NDCCode": "71335-1691-1",
"PackageDescription": "12 CAPSULE in 1 BOTTLE (71335-1691-1) ",
"NDC11Code": "71335-1691-01",
"ProductNDC": "71335-1691",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ergocalciferol",
"NonProprietaryName": "Ergocalciferol Capsules,",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20181210",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204276",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ERGOCALCIFEROL",
"StrengthNumber": "1.25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Ergocalciferols [CS], Provitamin D2 Compound [EPC]",
"Status": "Active",
"LastUpdate": "2024-08-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200820",
"SamplePackage": "N",
"IndicationAndUsage": "Ergocalciferol Capsules are indicated for use in the treatment of hypoparathyroidism, refractory rickets, also known as vitamin D resistant rickets, and familial hypophosphatemia.",
"Description": "Ergocalciferol Capsules, USP is a synthetic calcium regulator for oral administration. Ergocalciferol is a white, colorless crystal, insoluble in water, soluble in organic solvents, and slightly soluble in vegetable oils. It is affected by air and by light. Ergosterol or provitamin D2 is found in plants and yeast and has no antirachitic activity. There are more than 10 substances belonging to a group of steroid compounds, classified as having vitamin D or antirachitic activity. One USP unit of vitamin D2 is equivalent to one International Unit (IU), and 1 mcg of vitamin D2 is equal to 40 IU. Each capsule contains 1.25 mg (50,000 International Units vitamin D) of ergocalciferol, USP, in an edible vegetable oil. Ergocalciferol, also called vitamin D2, is 9, 10-secoergosta-5, 7, 10(19), 22-tetraen-3-ol, (3ß, 5Z, 7E, 22E)-; (C28H44O) with a molecular weight of 396.65, and has the following structural formula. Inactive Ingredients: Butylated hydroxytoluene, D&C Yellow #10, FD&C Blue #1, Gelatin, Glycerin, Propylene Glycol, Shellac, Simethicone, Soybean oil and Titanium Dioxide."
},
{
"NDCCode": "71335-1691-2",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (71335-1691-2) ",
"NDC11Code": "71335-1691-02",
"ProductNDC": "71335-1691",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ergocalciferol",
"NonProprietaryName": "Ergocalciferol Capsules,",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20181210",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204276",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ERGOCALCIFEROL",
"StrengthNumber": "1.25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Ergocalciferols [CS], Provitamin D2 Compound [EPC]",
"Status": "Active",
"LastUpdate": "2024-08-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200820",
"SamplePackage": "N",
"IndicationAndUsage": "Ergocalciferol Capsules are indicated for use in the treatment of hypoparathyroidism, refractory rickets, also known as vitamin D resistant rickets, and familial hypophosphatemia.",
"Description": "Ergocalciferol Capsules, USP is a synthetic calcium regulator for oral administration. Ergocalciferol is a white, colorless crystal, insoluble in water, soluble in organic solvents, and slightly soluble in vegetable oils. It is affected by air and by light. Ergosterol or provitamin D2 is found in plants and yeast and has no antirachitic activity. There are more than 10 substances belonging to a group of steroid compounds, classified as having vitamin D or antirachitic activity. One USP unit of vitamin D2 is equivalent to one International Unit (IU), and 1 mcg of vitamin D2 is equal to 40 IU. Each capsule contains 1.25 mg (50,000 International Units vitamin D) of ergocalciferol, USP, in an edible vegetable oil. Ergocalciferol, also called vitamin D2, is 9, 10-secoergosta-5, 7, 10(19), 22-tetraen-3-ol, (3ß, 5Z, 7E, 22E)-; (C28H44O) with a molecular weight of 396.65, and has the following structural formula. Inactive Ingredients: Butylated hydroxytoluene, D&C Yellow #10, FD&C Blue #1, Gelatin, Glycerin, Propylene Glycol, Shellac, Simethicone, Soybean oil and Titanium Dioxide."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>80830-1691-9</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (80830-1691-9) / 15 mL in 1 VIAL, SINGLE-DOSE (80830-1691-3) </PackageDescription>
<NDC11Code>80830-1691-09</NDC11Code>
<ProductNDC>80830-1691</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Phosphates</ProprietaryName>
<NonProprietaryName>Potassium Phosphate, Monobasic Potassium Phosphate, Dibasic Injection,</NonProprietaryName>
<DosageFormName>SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250709</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216344</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>POTASSIUM PHOSPHATE, MONOBASIC; POTASSIUM PHOSPHATE, DIBASIC</SubstanceName>
<StrengthNumber>224; 236</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250709</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium phosphates injection is indicated as a source of phosphorus: : 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated. , 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated. .</IndicationAndUsage>
<Description>Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile clear, colorless, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate, USP and dibasic potassium phosphate, USP in water for injection. It is supplied as a 15 mL single-dose vial. Monobasic potassium phosphate, USP is chemically designated potassium dihydrogen phosphate. The molecular formula is KH2PO4, molecular weight is 136.084 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water and practically insoluble in alcohol. Dibasic potassium phosphate, USP is chemically designated dipotassium hydrogen phosphate. The molecular formula is K2HPO4, molecular weight is 174.18 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water. Each mL of Potassium Phosphates Injection, USP contains monobasic potassium phosphate USP, 224 mg; dibasic potassium phosphate USP, 236 mg and water for injection. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route.</Description>
</NDC>
<NDC>
<NDCCode>71335-1691-9</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (71335-1691-9) </PackageDescription>
<NDC11Code>71335-1691-09</NDC11Code>
<ProductNDC>71335-1691</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ergocalciferol</ProprietaryName>
<NonProprietaryName>Ergocalciferol Capsules,</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181210</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204276</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ERGOCALCIFEROL</SubstanceName>
<StrengthNumber>1.25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Ergocalciferols [CS], Provitamin D2 Compound [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200820</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ergocalciferol Capsules are indicated for use in the treatment of hypoparathyroidism, refractory rickets, also known as vitamin D resistant rickets, and familial hypophosphatemia.</IndicationAndUsage>
<Description>Ergocalciferol Capsules, USP is a synthetic calcium regulator for oral administration. Ergocalciferol is a white, colorless crystal, insoluble in water, soluble in organic solvents, and slightly soluble in vegetable oils. It is affected by air and by light. Ergosterol or provitamin D2 is found in plants and yeast and has no antirachitic activity. There are more than 10 substances belonging to a group of steroid compounds, classified as having vitamin D or antirachitic activity. One USP unit of vitamin D2 is equivalent to one International Unit (IU), and 1 mcg of vitamin D2 is equal to 40 IU. Each capsule contains 1.25 mg (50,000 International Units vitamin D) of ergocalciferol, USP, in an edible vegetable oil. Ergocalciferol, also called vitamin D2, is 9, 10-secoergosta-5, 7, 10(19), 22-tetraen-3-ol, (3ß, 5Z, 7E, 22E)-; (C28H44O) with a molecular weight of 396.65, and has the following structural formula. Inactive Ingredients: Butylated hydroxytoluene, D&C Yellow #10, FD&C Blue #1, Gelatin, Glycerin, Propylene Glycol, Shellac, Simethicone, Soybean oil and Titanium Dioxide.</Description>
</NDC>
<NDC>
<NDCCode>80830-1691-2</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (80830-1691-2) / 15 mL in 1 VIAL, SINGLE-DOSE (80830-1691-1) </PackageDescription>
<NDC11Code>80830-1691-02</NDC11Code>
<ProductNDC>80830-1691</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Phosphates</ProprietaryName>
<NonProprietaryName>Potassium Phosphate, Monobasic Potassium Phosphate, Dibasic Injection,</NonProprietaryName>
<DosageFormName>SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20231023</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216344</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>POTASSIUM PHOSPHATE, MONOBASIC; POTASSIUM PHOSPHATE, DIBASIC</SubstanceName>
<StrengthNumber>224; 236</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231023</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium phosphates injection is indicated as a source of phosphorus: : 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated. , 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated. .</IndicationAndUsage>
<Description>Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile clear, colorless, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate, USP and dibasic potassium phosphate, USP in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial. Monobasic potassium phosphate, USP is chemically designated potassium dihydrogen phosphate. The molecular formula is KH2PO4, molecular weight is 136.084 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water and practically insoluble in alcohol. Dibasic potassium phosphate, USP is chemically designated dipotassium hydrogen phosphate. The molecular formula is K2HPO4, molecular weight is 174.18 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water. Each mL of Potassium Phosphates Injection, USP contains monobasic potassium phosphate USP, 224 mg; dibasic potassium phosphate USP, 236 mg and water for injection. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route.</Description>
</NDC>
<NDC>
<NDCCode>80830-1691-5</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (80830-1691-5) / 15 mL in 1 VIAL, SINGLE-DOSE (80830-1691-1) </PackageDescription>
<NDC11Code>80830-1691-05</NDC11Code>
<ProductNDC>80830-1691</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Phosphates</ProprietaryName>
<NonProprietaryName>Potassium Phosphate, Monobasic Potassium Phosphate, Dibasic Injection,</NonProprietaryName>
<DosageFormName>SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20231023</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216344</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>POTASSIUM PHOSPHATE, MONOBASIC; POTASSIUM PHOSPHATE, DIBASIC</SubstanceName>
<StrengthNumber>224; 236</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231023</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium phosphates injection is indicated as a source of phosphorus: : 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated. , 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated. .</IndicationAndUsage>
<Description>Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile clear, colorless, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate, USP and dibasic potassium phosphate, USP in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial. Monobasic potassium phosphate, USP is chemically designated potassium dihydrogen phosphate. The molecular formula is KH2PO4, molecular weight is 136.084 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water and practically insoluble in alcohol. Dibasic potassium phosphate, USP is chemically designated dipotassium hydrogen phosphate. The molecular formula is K2HPO4, molecular weight is 174.18 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water. Each mL of Potassium Phosphates Injection, USP contains monobasic potassium phosphate USP, 224 mg; dibasic potassium phosphate USP, 236 mg and water for injection. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route.</Description>
</NDC>
<NDC>
<NDCCode>80830-1691-7</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (80830-1691-7) / 15 mL in 1 VIAL, SINGLE-DOSE (80830-1691-6) </PackageDescription>
<NDC11Code>80830-1691-07</NDC11Code>
<ProductNDC>80830-1691</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Phosphates</ProprietaryName>
<NonProprietaryName>Potassium Phosphate, Monobasic Potassium Phosphate, Dibasic Injection,</NonProprietaryName>
<DosageFormName>SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250709</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216344</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>POTASSIUM PHOSPHATE, MONOBASIC; POTASSIUM PHOSPHATE, DIBASIC</SubstanceName>
<StrengthNumber>224; 236</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250709</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium phosphates injection is indicated as a source of phosphorus: : 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated. , 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated. .</IndicationAndUsage>
<Description>Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile clear, colorless, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate, USP and dibasic potassium phosphate, USP in water for injection. It is supplied as a 15 mL single-dose vial. Monobasic potassium phosphate, USP is chemically designated potassium dihydrogen phosphate. The molecular formula is KH2PO4, molecular weight is 136.084 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water and practically insoluble in alcohol. Dibasic potassium phosphate, USP is chemically designated dipotassium hydrogen phosphate. The molecular formula is K2HPO4, molecular weight is 174.18 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water. Each mL of Potassium Phosphates Injection, USP contains monobasic potassium phosphate USP, 224 mg; dibasic potassium phosphate USP, 236 mg and water for injection. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route.</Description>
</NDC>
<NDC>
<NDCCode>80830-2362-9</NDCCode>
<PackageDescription>24 POUCH in 1 CARTON (80830-2362-9) / 1 BAG in 1 POUCH / 50 mL in 1 BAG</PackageDescription>
<NDC11Code>80830-2362-09</NDC11Code>
<ProductNDC>80830-2362</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Calcium Gluconate</ProprietaryName>
<NonProprietaryName>Calcium Gluconate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230908</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217174</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230908</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Calcium gluconate in sodium chloride injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.</IndicationAndUsage>
<Description>Calcium gluconate in sodium chloride injection is a sterile, clear, colorless, preservative-free, nonpyrogenic, solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14 H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate in Sodium Chloride Injection is available as 1,000 mg per 50 mL (18.8 mg per mL) or 2,000 mg per 100 mL (18.8 mg per mL) filled in single-dose infusion bags. Each mL of calcium gluconate in sodium chloride injection contains 20 mg of calcium gluconate (equivalent to 18.8 mg of calcium gluconate and 0.9 mg of calcium saccharate tetrahydrate), 6.75 mg sodium chloride as tonicity adjustor, hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and water for injection. Each mL of calcium gluconate in sodium chloride injection contains 1.86 mg (0.093 mEq) of elemental calcium.</Description>
</NDC>
<NDC>
<NDCCode>80830-2363-9</NDCCode>
<PackageDescription>24 POUCH in 1 CARTON (80830-2363-9) / 1 BAG in 1 POUCH / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>80830-2363-09</NDC11Code>
<ProductNDC>80830-2363</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Calcium Gluconate</ProprietaryName>
<NonProprietaryName>Calcium Gluconate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230908</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217174</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230908</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Calcium gluconate in sodium chloride injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.</IndicationAndUsage>
<Description>Calcium gluconate in sodium chloride injection is a sterile, clear, colorless, preservative-free, nonpyrogenic, solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14 H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate in Sodium Chloride Injection is available as 1,000 mg per 50 mL (18.8 mg per mL) or 2,000 mg per 100 mL (18.8 mg per mL) filled in single-dose infusion bags. Each mL of calcium gluconate in sodium chloride injection contains 20 mg of calcium gluconate (equivalent to 18.8 mg of calcium gluconate and 0.9 mg of calcium saccharate tetrahydrate), 6.75 mg sodium chloride as tonicity adjustor, hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and water for injection. Each mL of calcium gluconate in sodium chloride injection contains 1.86 mg (0.093 mEq) of elemental calcium.</Description>
</NDC>
<NDC>
<NDCCode>80830-2465-9</NDCCode>
<PackageDescription>24 POUCH in 1 CARTON (80830-2465-9) / 1 BAG in 1 POUCH (80830-2465-1) / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>80830-2465-09</NDC11Code>
<ProductNDC>80830-2465</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metronidazole</ProprietaryName>
<NonProprietaryName>Metronidazole</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230617</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217665</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>METRONIDAZOLE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Pharm_Classes>Nitroimidazole Antimicrobial [EPC], Nitroimidazoles [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230617</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metronidazole injection is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Indicated surgical procedures should be performed in conjunction with metronidazole injection therapy. In a mixed aerobic and anaerobic infection, antibacterial drugs appropriate for the treatment of the aerobic infection should be used in addition to metronidazole injection. Metronidazole injection is effective in Bacteroides fragilis infections resistant to clindamycin, chloramphenicol and penicillin. : 1 Intra-Abdominal Infections, including peritonitis, intra-abdominal abscess and liver abscess, caused by Bacteroides species including the B. fragilis group (B. fragilis, B. distasonis, B. ovatus, B. thetaiotaomicron, B. vulgatus), Clostridium species, Eubacterium species, Peptococcus species and Peptostreptococcus species in adults and pediatric patients less than 4 months of age. .</IndicationAndUsage>
<Description>Metronidazole injection, USP, is a parenteral formulation of the synthetic nitroimidazole antibacterial agent 2-methyl-5-nitro-1H-imidazole-1-ethanol. Metronidazole injection USP, 500 mg/100 mL (5 mg/mL) is a sterile, clear, colorless to pale yellow color, nonpyrogenic, iso-osmotic, buffered solution supplied in 100 mL single-dose non-PVC plastic container. Each 100 mL contains 500 mg metronidazole, USP; 790 mg sodium chloride, USP; 47.6 mg dibasic sodium phosphate dried, USP; and 22.9 mg citric acid anhydrous, USP. Metronidazole injection, USP has an osmolarity of 308.66 mOsmol/L (calc) and a pH of 5.5 (4.5 to 7.0). Each container contains 14 mEq of sodium.</Description>
</NDC>
<NDC>
<NDCCode>80830-1659-2</NDCCode>
<PackageDescription>25 VIAL, GLASS in 1 CARTON (80830-1659-2) / 1 mL in 1 VIAL, GLASS (80830-1659-1) </PackageDescription>
<NDC11Code>80830-1659-02</NDC11Code>
<ProductNDC>80830-1659</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Epinephrine</ProprietaryName>
<NonProprietaryName>Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20251208</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218208</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>EPINEPHRINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251208</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Epinephrine is a non-selective alpha and beta adrenergic agonist indicated for: 1 Emergency treatment of allergic reactions (Type 1), including anaphylaxis. (1.1), 2 To increase mean arterial blood pressure in adult patients with hypotension associated with septic shock. (1.2).</IndicationAndUsage>
<Description>Epinephrine Injection, USP is a clear, colorless, sterile solution containing 1 mg/mL epinephrine USP, packaged as 1 mL of solution in a single-dose clear glass vial. In the 1 mL vial, each 1 mL of epinephrine injection, USP solution contains 1 mg epinephrine, USP; 9 mg sodium chloride; 1 mg sodium metabisulfite; hydrochloric acid to adjust pH and water for injection. The pH range is 2.2 to 5.0. Epinephrine is a sympathomimetic catecholamine. The chemical name of epinephrine is: 1,2-Benzenediol, 4-[1-hydroxy-2-(methylamino)ethyl]-,(R)- or (-)-3,4-Dihydroxy-α-[(methylamino)methyl]benzyl alcohol. Its chemical structure is. The molecular weight of epinephrine is 183.2 g/mol and molecular formula is C9H13NO3. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin.</Description>
</NDC>
<NDC>
<NDCCode>80830-1672-2</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (80830-1672-2) / 10 mL in 1 VIAL (80830-1672-1) </PackageDescription>
<NDC11Code>80830-1672-02</NDC11Code>
<ProductNDC>80830-1672</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Calcium Gluconate</ProprietaryName>
<NonProprietaryName>Calcium Gluconate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240513</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216611</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
<StrengthNumber>98</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240513</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Calcium gluconate injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.</IndicationAndUsage>
<Description>Calcium gluconate injection USP, 100 mg per mL is a sterile, clear, colorless to slightly yellow, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of calcium gluconate injection, USP contains: 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of calcium gluconate injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium.</Description>
</NDC>
<NDC>
<NDCCode>80830-1672-4</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (80830-1672-4) / 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>80830-1672-04</NDC11Code>
<ProductNDC>80830-1672</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Calcium Gluconate</ProprietaryName>
<NonProprietaryName>Calcium Gluconate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260413</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216611</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
<StrengthNumber>98</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260413</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Calcium gluconate injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.</IndicationAndUsage>
<Description>Calcium gluconate injection USP, 100 mg per mL is a sterile, clear, colorless to slightly yellow, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of calcium gluconate injection, USP contains: 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of calcium gluconate injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium.</Description>
</NDC>
<NDC>
<NDCCode>80830-1672-5</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (80830-1672-5) / 10 mL in 1 VIAL (80830-1672-1) </PackageDescription>
<NDC11Code>80830-1672-05</NDC11Code>
<ProductNDC>80830-1672</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Calcium Gluconate</ProprietaryName>
<NonProprietaryName>Calcium Gluconate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240513</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216611</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
<StrengthNumber>98</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240513</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Calcium gluconate injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.</IndicationAndUsage>
<Description>Calcium gluconate injection USP, 100 mg per mL is a sterile, clear, colorless to slightly yellow, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of calcium gluconate injection, USP contains: 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of calcium gluconate injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium.</Description>
</NDC>
<NDC>
<NDCCode>80830-1673-2</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (80830-1673-2) / 50 mL in 1 VIAL (80830-1673-1) </PackageDescription>
<NDC11Code>80830-1673-02</NDC11Code>
<ProductNDC>80830-1673</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Calcium Gluconate</ProprietaryName>
<NonProprietaryName>Calcium Gluconate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240513</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216611</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
<StrengthNumber>98</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240513</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Calcium gluconate injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.</IndicationAndUsage>
<Description>Calcium gluconate injection USP, 100 mg per mL is a sterile, clear, colorless to slightly yellow, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of calcium gluconate injection, USP contains: 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of calcium gluconate injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium.</Description>
</NDC>
<NDC>
<NDCCode>80830-1673-4</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (80830-1673-4) / 50 mL in 1 VIAL</PackageDescription>
<NDC11Code>80830-1673-04</NDC11Code>
<ProductNDC>80830-1673</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Calcium Gluconate</ProprietaryName>
<NonProprietaryName>Calcium Gluconate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260413</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216611</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
<StrengthNumber>98</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260413</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Calcium gluconate injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.</IndicationAndUsage>
<Description>Calcium gluconate injection USP, 100 mg per mL is a sterile, clear, colorless to slightly yellow, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of calcium gluconate injection, USP contains: 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of calcium gluconate injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium.</Description>
</NDC>
<NDC>
<NDCCode>80830-1673-5</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (80830-1673-5) / 50 mL in 1 VIAL (80830-1673-1) </PackageDescription>
<NDC11Code>80830-1673-05</NDC11Code>
<ProductNDC>80830-1673</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Calcium Gluconate</ProprietaryName>
<NonProprietaryName>Calcium Gluconate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240513</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216611</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
<StrengthNumber>98</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240513</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Calcium gluconate injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.</IndicationAndUsage>
<Description>Calcium gluconate injection USP, 100 mg per mL is a sterile, clear, colorless to slightly yellow, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of calcium gluconate injection, USP contains: 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of calcium gluconate injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium.</Description>
</NDC>
<NDC>
<NDCCode>80830-1674-2</NDCCode>
<PackageDescription>10 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (80830-1674-2) / 100 mL in 1 VIAL, PHARMACY BULK PACKAGE (80830-1674-8) </PackageDescription>
<NDC11Code>80830-1674-02</NDC11Code>
<ProductNDC>80830-1674</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Calcium Gluconate</ProprietaryName>
<NonProprietaryName>Calcium Gluconate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240513</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216611</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
<StrengthNumber>98</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240513</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Calcium gluconate injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.</IndicationAndUsage>
<Description>Calcium gluconate injection USP, 100 mg per mL is a sterile, clear, colorless to slightly yellow, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of calcium gluconate injection, USP contains: 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of calcium gluconate injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium.</Description>
</NDC>
<NDC>
<NDCCode>80830-1674-3</NDCCode>
<PackageDescription>10 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (80830-1674-3) / 100 mL in 1 VIAL, PHARMACY BULK PACKAGE</PackageDescription>
<NDC11Code>80830-1674-03</NDC11Code>
<ProductNDC>80830-1674</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Calcium Gluconate</ProprietaryName>
<NonProprietaryName>Calcium Gluconate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260413</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216611</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
<StrengthNumber>98</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260413</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Calcium gluconate injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.</IndicationAndUsage>
<Description>Calcium gluconate injection USP, 100 mg per mL is a sterile, clear, colorless to slightly yellow, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of calcium gluconate injection, USP contains: 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of calcium gluconate injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium.</Description>
</NDC>
<NDC>
<NDCCode>80830-1674-5</NDCCode>
<PackageDescription>25 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (80830-1674-5) / 100 mL in 1 VIAL, PHARMACY BULK PACKAGE (80830-1674-8) </PackageDescription>
<NDC11Code>80830-1674-05</NDC11Code>
<ProductNDC>80830-1674</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Calcium Gluconate</ProprietaryName>
<NonProprietaryName>Calcium Gluconate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240513</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216611</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
<StrengthNumber>98</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240513</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Calcium gluconate injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.</IndicationAndUsage>
<Description>Calcium gluconate injection USP, 100 mg per mL is a sterile, clear, colorless to slightly yellow, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of calcium gluconate injection, USP contains: 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of calcium gluconate injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium.</Description>
</NDC>
<NDC>
<NDCCode>80830-2301-5</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (80830-2301-5) / 10 mL in 1 VIAL (80830-2301-1) </PackageDescription>
<NDC11Code>80830-2301-05</NDC11Code>
<ProductNDC>80830-2301</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cupric Chloride</ProprietaryName>
<NonProprietaryName>Cupric Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217287</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>CUPRIC CHLORIDE</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-02-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260129</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cupric chloride injection is indicated for use as a supplement to intravenous solutions given for TPN. Administration helps to maintain copper serum levels and to prevent depletion of endogenous stores and subsequent deficiency symptoms.</IndicationAndUsage>
<Description>Cupric chloride injection USP, 0.4 mg/mL is a sterile, clear, colorless to light blue color, nonpyrogenic solution intended for use as an additive to intravenous solutions for total parenteral nutrition (TPN). Each mL of solution contains 1.07 mg cupric chloride dihydrate; 9 mg sodium chloride and water for injection. The solution contains no bacteriostat, antimicrobial agent or added buffer. The pH is 2.0 (1.5 to 2.5); product may contain hydrochloric acid and sodium hydroxide for pH adjustment. The osmolarity is 0.327 mOsmol/mL (calc.). Cupric chloride, USP is chemically designated cupric chloride, dihydrate. Its molecular weight is 170.48 g/mol. The molecular formula is CuCl2 2H2O and the structural formula is. Cupric chloride, USP is a blue to blue-green crystalline compound freely soluble in water, soluble in alcohol and slightly soluble in ether. Sodium chloride, USP is chemically designated NaCl, a white crystalline compound freely soluble in water. The semi-rigid vial is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The small amount of water vapor that can pass through the plastic container wall will not significantly alter the drug concentration.</Description>
</NDC>
<NDC>
<NDCCode>80830-2362-2</NDCCode>
<PackageDescription>12 POUCH in 1 CARTON (80830-2362-2) / 1 BAG in 1 POUCH / 50 mL in 1 BAG</PackageDescription>
<NDC11Code>80830-2362-02</NDC11Code>
<ProductNDC>80830-2362</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Calcium Gluconate</ProprietaryName>
<NonProprietaryName>Calcium Gluconate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230908</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217174</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231108</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Calcium gluconate in sodium chloride injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.</IndicationAndUsage>
<Description>Calcium gluconate in sodium chloride injection is a sterile, clear, colorless, preservative-free, nonpyrogenic, solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14 H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate in Sodium Chloride Injection is available as 1,000 mg per 50 mL (18.8 mg per mL) or 2,000 mg per 100 mL (18.8 mg per mL) filled in single-dose infusion bags. Each mL of calcium gluconate in sodium chloride injection contains 20 mg of calcium gluconate (equivalent to 18.8 mg of calcium gluconate and 0.9 mg of calcium saccharate tetrahydrate), 6.75 mg sodium chloride as tonicity adjustor, hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and water for injection. Each mL of calcium gluconate in sodium chloride injection contains 1.86 mg (0.093 mEq) of elemental calcium.</Description>
</NDC>
<NDC>
<NDCCode>80830-2363-2</NDCCode>
<PackageDescription>12 POUCH in 1 CARTON (80830-2363-2) / 1 BAG in 1 POUCH / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>80830-2363-02</NDC11Code>
<ProductNDC>80830-2363</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Calcium Gluconate</ProprietaryName>
<NonProprietaryName>Calcium Gluconate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230908</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217174</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231108</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Calcium gluconate in sodium chloride injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.</IndicationAndUsage>
<Description>Calcium gluconate in sodium chloride injection is a sterile, clear, colorless, preservative-free, nonpyrogenic, solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14 H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate in Sodium Chloride Injection is available as 1,000 mg per 50 mL (18.8 mg per mL) or 2,000 mg per 100 mL (18.8 mg per mL) filled in single-dose infusion bags. Each mL of calcium gluconate in sodium chloride injection contains 20 mg of calcium gluconate (equivalent to 18.8 mg of calcium gluconate and 0.9 mg of calcium saccharate tetrahydrate), 6.75 mg sodium chloride as tonicity adjustor, hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and water for injection. Each mL of calcium gluconate in sodium chloride injection contains 1.86 mg (0.093 mEq) of elemental calcium.</Description>
</NDC>
<NDC>
<NDCCode>50090-1691-0</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (50090-1691-0) </PackageDescription>
<NDC11Code>50090-1691-00</NDC11Code>
<ProductNDC>50090-1691</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buspirone Hcl</ProprietaryName>
<NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20010328</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074253</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>Y</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, lll1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge”, irritability, impatience.</IndicationAndUsage>
<Description>Buspirone hydrochloride is an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]-butyl]-8-azaspiro[4.5]decane-7,9- dione monohydrochloride. The empirical formula C21H31N5O2 HCl is represented by the following structural formula. Each tablet for oral administration containing 5 mg, 10 mg, or 15 mg of buspirone hydrochloride USP (equivalent to 4.6 mg, 9.1 mg, and 13.7 mg of buspirone free base respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablet is provided in a special tablet design. This tablet is scored so it can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>50090-1691-1</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (50090-1691-1) </PackageDescription>
<NDC11Code>50090-1691-01</NDC11Code>
<ProductNDC>50090-1691</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buspirone Hcl</ProprietaryName>
<NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20010328</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074253</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>Y</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, lll1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge”, irritability, impatience.</IndicationAndUsage>
<Description>Buspirone hydrochloride is an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]-butyl]-8-azaspiro[4.5]decane-7,9- dione monohydrochloride. The empirical formula C21H31N5O2 HCl is represented by the following structural formula. Each tablet for oral administration containing 5 mg, 10 mg, or 15 mg of buspirone hydrochloride USP (equivalent to 4.6 mg, 9.1 mg, and 13.7 mg of buspirone free base respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablet is provided in a special tablet design. This tablet is scored so it can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>50090-1691-3</NDCCode>
<PackageDescription>180 TABLET in 1 BOTTLE (50090-1691-3) </PackageDescription>
<NDC11Code>50090-1691-03</NDC11Code>
<ProductNDC>50090-1691</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buspirone Hcl</ProprietaryName>
<NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20010328</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074253</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>Y</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, lll1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge”, irritability, impatience.</IndicationAndUsage>
<Description>Buspirone hydrochloride is an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]-butyl]-8-azaspiro[4.5]decane-7,9- dione monohydrochloride. The empirical formula C21H31N5O2 HCl is represented by the following structural formula. Each tablet for oral administration containing 5 mg, 10 mg, or 15 mg of buspirone hydrochloride USP (equivalent to 4.6 mg, 9.1 mg, and 13.7 mg of buspirone free base respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablet is provided in a special tablet design. This tablet is scored so it can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>50090-1691-4</NDCCode>
<PackageDescription>45 TABLET in 1 BOTTLE (50090-1691-4) </PackageDescription>
<NDC11Code>50090-1691-04</NDC11Code>
<ProductNDC>50090-1691</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buspirone Hcl</ProprietaryName>
<NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20010328</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074253</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>Y</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, lll1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge”, irritability, impatience.</IndicationAndUsage>
<Description>Buspirone hydrochloride is an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]-butyl]-8-azaspiro[4.5]decane-7,9- dione monohydrochloride. The empirical formula C21H31N5O2 HCl is represented by the following structural formula. Each tablet for oral administration containing 5 mg, 10 mg, or 15 mg of buspirone hydrochloride USP (equivalent to 4.6 mg, 9.1 mg, and 13.7 mg of buspirone free base respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablet is provided in a special tablet design. This tablet is scored so it can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>50090-1691-5</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (50090-1691-5) </PackageDescription>
<NDC11Code>50090-1691-05</NDC11Code>
<ProductNDC>50090-1691</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buspirone Hcl</ProprietaryName>
<NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20010328</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074253</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>Y</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, lll1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge”, irritability, impatience.</IndicationAndUsage>
<Description>Buspirone hydrochloride is an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]-butyl]-8-azaspiro[4.5]decane-7,9- dione monohydrochloride. The empirical formula C21H31N5O2 HCl is represented by the following structural formula. Each tablet for oral administration containing 5 mg, 10 mg, or 15 mg of buspirone hydrochloride USP (equivalent to 4.6 mg, 9.1 mg, and 13.7 mg of buspirone free base respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablet is provided in a special tablet design. This tablet is scored so it can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>67046-1691-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (67046-1691-3) </PackageDescription>
<NDC11Code>67046-1691-03</NDC11Code>
<ProductNDC>67046-1691</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Topiramate</ProprietaryName>
<NonProprietaryName>Topiramate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260803</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090162</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>TOPIRAMATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260803</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Topiramate tablets are indicated for: 1 Epilepsy: initial monotherapy for the treatment of partial-onset or primary generalized tonic-clonic seizures in patients 2 years of age and older (1.1); adjunctive therapy for the treatment of partial-onset seizures, primary generalized tonic-clonic seizures, or seizures associated with Lennox-Gastaut syndrome in patients 2 years of age and older ( 1.2) , 2 Preventive treatment of migraine in patients 12 years of age and older ( 1.3) .</IndicationAndUsage>
<Description>Topiramate, USP is a sulfamate-substituted monosaccharide. Topiramate tablets, USP are available as 25 mg, 50 mg, 100 mg, and 200 mg round shaped tablets for oral administration. Topiramate, USP is a white crystalline powder with a bitter taste. Topiramate, USP is most soluble in alkaline solutions containing sodium hydroxide or sodium phosphate and having a pH of 9 to 10. It is freely soluble in acetone, chloroform, dimethylsulfoxide, and ethanol. The solubility in water is 9.8 mg/mL. Its saturated solution has a pH of 6.3. Topiramate, USP has the molecular formula C 12H 21NO 8S and a molecular weight of 339.36. Topiramate, USP is designated chemically as 2,3:4,5-Di- O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula:. Topiramate tablets, USP contain the following inactive ingredients: lactose monohydrate, pregelatinized corn starch, microcrystalline cellulose, sodium starch glycolate Type A (Potato), magnesium stearate, hypromellose, polysorbate 80, polyethylene glycol, and titanium dioxide. In addition the 25 mg, 100 mg and 200 mg tablets also contain yellow iron oxide; the 25 mg and 100 mg tablets also contain red iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>71335-1691-0</NDCCode>
<PackageDescription>45 CAPSULE in 1 BOTTLE (71335-1691-0) </PackageDescription>
<NDC11Code>71335-1691-00</NDC11Code>
<ProductNDC>71335-1691</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ergocalciferol</ProprietaryName>
<NonProprietaryName>Ergocalciferol Capsules,</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181210</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204276</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ERGOCALCIFEROL</SubstanceName>
<StrengthNumber>1.25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Ergocalciferols [CS], Provitamin D2 Compound [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200820</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ergocalciferol Capsules are indicated for use in the treatment of hypoparathyroidism, refractory rickets, also known as vitamin D resistant rickets, and familial hypophosphatemia.</IndicationAndUsage>
<Description>Ergocalciferol Capsules, USP is a synthetic calcium regulator for oral administration. Ergocalciferol is a white, colorless crystal, insoluble in water, soluble in organic solvents, and slightly soluble in vegetable oils. It is affected by air and by light. Ergosterol or provitamin D2 is found in plants and yeast and has no antirachitic activity. There are more than 10 substances belonging to a group of steroid compounds, classified as having vitamin D or antirachitic activity. One USP unit of vitamin D2 is equivalent to one International Unit (IU), and 1 mcg of vitamin D2 is equal to 40 IU. Each capsule contains 1.25 mg (50,000 International Units vitamin D) of ergocalciferol, USP, in an edible vegetable oil. Ergocalciferol, also called vitamin D2, is 9, 10-secoergosta-5, 7, 10(19), 22-tetraen-3-ol, (3ß, 5Z, 7E, 22E)-; (C28H44O) with a molecular weight of 396.65, and has the following structural formula. Inactive Ingredients: Butylated hydroxytoluene, D&C Yellow #10, FD&C Blue #1, Gelatin, Glycerin, Propylene Glycol, Shellac, Simethicone, Soybean oil and Titanium Dioxide.</Description>
</NDC>
<NDC>
<NDCCode>71335-1691-1</NDCCode>
<PackageDescription>12 CAPSULE in 1 BOTTLE (71335-1691-1) </PackageDescription>
<NDC11Code>71335-1691-01</NDC11Code>
<ProductNDC>71335-1691</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ergocalciferol</ProprietaryName>
<NonProprietaryName>Ergocalciferol Capsules,</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181210</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204276</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ERGOCALCIFEROL</SubstanceName>
<StrengthNumber>1.25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Ergocalciferols [CS], Provitamin D2 Compound [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200820</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ergocalciferol Capsules are indicated for use in the treatment of hypoparathyroidism, refractory rickets, also known as vitamin D resistant rickets, and familial hypophosphatemia.</IndicationAndUsage>
<Description>Ergocalciferol Capsules, USP is a synthetic calcium regulator for oral administration. Ergocalciferol is a white, colorless crystal, insoluble in water, soluble in organic solvents, and slightly soluble in vegetable oils. It is affected by air and by light. Ergosterol or provitamin D2 is found in plants and yeast and has no antirachitic activity. There are more than 10 substances belonging to a group of steroid compounds, classified as having vitamin D or antirachitic activity. One USP unit of vitamin D2 is equivalent to one International Unit (IU), and 1 mcg of vitamin D2 is equal to 40 IU. Each capsule contains 1.25 mg (50,000 International Units vitamin D) of ergocalciferol, USP, in an edible vegetable oil. Ergocalciferol, also called vitamin D2, is 9, 10-secoergosta-5, 7, 10(19), 22-tetraen-3-ol, (3ß, 5Z, 7E, 22E)-; (C28H44O) with a molecular weight of 396.65, and has the following structural formula. Inactive Ingredients: Butylated hydroxytoluene, D&C Yellow #10, FD&C Blue #1, Gelatin, Glycerin, Propylene Glycol, Shellac, Simethicone, Soybean oil and Titanium Dioxide.</Description>
</NDC>
<NDC>
<NDCCode>71335-1691-2</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (71335-1691-2) </PackageDescription>
<NDC11Code>71335-1691-02</NDC11Code>
<ProductNDC>71335-1691</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ergocalciferol</ProprietaryName>
<NonProprietaryName>Ergocalciferol Capsules,</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181210</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204276</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ERGOCALCIFEROL</SubstanceName>
<StrengthNumber>1.25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Ergocalciferols [CS], Provitamin D2 Compound [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200820</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ergocalciferol Capsules are indicated for use in the treatment of hypoparathyroidism, refractory rickets, also known as vitamin D resistant rickets, and familial hypophosphatemia.</IndicationAndUsage>
<Description>Ergocalciferol Capsules, USP is a synthetic calcium regulator for oral administration. Ergocalciferol is a white, colorless crystal, insoluble in water, soluble in organic solvents, and slightly soluble in vegetable oils. It is affected by air and by light. Ergosterol or provitamin D2 is found in plants and yeast and has no antirachitic activity. There are more than 10 substances belonging to a group of steroid compounds, classified as having vitamin D or antirachitic activity. One USP unit of vitamin D2 is equivalent to one International Unit (IU), and 1 mcg of vitamin D2 is equal to 40 IU. Each capsule contains 1.25 mg (50,000 International Units vitamin D) of ergocalciferol, USP, in an edible vegetable oil. Ergocalciferol, also called vitamin D2, is 9, 10-secoergosta-5, 7, 10(19), 22-tetraen-3-ol, (3ß, 5Z, 7E, 22E)-; (C28H44O) with a molecular weight of 396.65, and has the following structural formula. Inactive Ingredients: Butylated hydroxytoluene, D&C Yellow #10, FD&C Blue #1, Gelatin, Glycerin, Propylene Glycol, Shellac, Simethicone, Soybean oil and Titanium Dioxide.</Description>
</NDC>
</NDCList>