{
"NDC": [
{
"NDCCode": "80830-2436-2",
"PackageDescription": "25 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (80830-2436-2) / 50 mL in 1 VIAL, PHARMACY BULK PACKAGE (80830-2436-1) ",
"NDC11Code": "80830-2436-02",
"ProductNDC": "80830-2436",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Acetate",
"NonProprietaryName": "Sodium Acetate",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250812",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218469",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "SODIUM ACETATE ANHYDROUS",
"StrengthNumber": "164",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2025-08-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250812",
"SamplePackage": "N",
"IndicationAndUsage": "Sodium acetate injection, 2 mEq/mL is indicated as a source of sodium for addition to large volume intravenous fluids to prevent or correct hyponatremia in patients with restricted or no oral intake. It is also useful as an additive for preparing specific intravenous fluid formulas when the needs of the patient cannot be met by standard electrolyte or nutrient solutions.",
"Description": "Sodium acetate injection, USP (2 mEq/mL) is a sterile, clear, colorless, nonpyrogenic, concentrated solution of sodium acetate in water for injection. The solution is administered after dilution by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each mL contains 164 mg of sodium acetate, USP (anhydrous) which provides 2 mEq each of sodium (Na+) and acetate (CH3COO-). The solution contains no bacteriostat, antimicrobial agent or added buffer. May contain acetic acid for pH adjustment; the pH is 6.5 (6.0 to 7.0). The osmolar concentration is 4 mOsmol/mL (calc.); specific gravity 1.081. The solution is intended as an alternative to sodium chloride to provide sodium ion (Na+) for addition to large volume infusion fluids for intravenous use. Sodium acetate, USP, anhydrous is chemically designated CH3COONa, a hygroscopic powder freely soluble in water. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture program and are restricted to the preparation of admixtures for intravenous infusion."
},
{
"NDCCode": "22840-2436-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (22840-2436-2) ",
"NDC11Code": "22840-2436-02",
"ProductNDC": "22840-2436",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Western Juniper Pollen",
"NonProprietaryName": "Juniperus Occidentalis",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "JUNIPERUS OCCIDENTALIS POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.",
"Description": "Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter."
},
{
"NDCCode": "36987-2436-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (36987-2436-2)",
"NDC11Code": "36987-2436-02",
"ProductNDC": "36987-2436",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Soft Cheat Brome",
"NonProprietaryName": "Soft Cheat Brome",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "BROMUS INERMIS POLLEN",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "37662-2436-2",
"PackageDescription": "500 PELLET in 1 VIAL, GLASS (37662-2436-2) ",
"NDC11Code": "37662-2436-02",
"ProductNDC": "37662-2436",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Mercurius Iodatus Flavus",
"NonProprietaryName": "Mercurius Iodatus Flavus",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230119",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "MERCUROUS IODIDE",
"StrengthNumber": "1",
"StrengthUnit": "[hp_M]/1",
"Status": "Active",
"LastUpdate": "2023-01-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230119",
"SamplePackage": "N"
},
{
"NDCCode": "49452-2436-2",
"PackageDescription": "5 g in 1 BOTTLE (49452-2436-2) ",
"NDC11Code": "49452-2436-02",
"ProductNDC": "49452-2436",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Danazol",
"DosageFormName": "POWDER",
"StartMarketingDate": "19951201",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Spectrum Laboratory Products, Inc.",
"SubstanceName": "DANAZOL",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Unfinished",
"LastUpdate": "2023-10-06",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "01-DEC-95"
},
{
"NDCCode": "71335-2436-2",
"PackageDescription": "60 TABLET in 1 BOTTLE (71335-2436-2) ",
"NDC11Code": "71335-2436-02",
"ProductNDC": "71335-2436",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Donepezil Hydrochloride",
"NonProprietaryName": "Donepezil Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20210629",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078662",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "DONEPEZIL HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-07-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240715",
"SamplePackage": "N",
"IndicationAndUsage": "Donepezil Hydrochloride tablets are indicated for the treatment of dementia of the Alzheimer’s type. Efficacy has been demonstrated in patients with mild, moderate, and severe Alzheimer’s disease.",
"Description": "Donepezil is a reversible inhibitor of the enzyme acetylcholinesterase, known chemically as (±)-2, 3-dihydro-5, 6-dimethoxy-2-[[1-(phenylmethyl)-4-piperidinyl]methyl]-1H-inden-1-one . Donepezil is commonly referred to in the pharmacological literature as E2020. It has a molecular formula of C24H29NO3HCl and a molecular weight of 415.96. Donepezil USP is a white to off-white powder and is freely soluble in chloroform, soluble in water and in glacial acetic acid, slightly soluble in ethanol and in acetonitrile and practically insoluble in ethyl acetate and in n-hexane. Donepezil hydrochloride USP is available for oral administration in tablets containing 5 mg or 10 mg of donepezil hydrochloride USP. Inactive ingredients are croscarmellose sodium, lactose, magnesium stearate, and microcrystalline cellulose."
},
{
"NDCCode": "80830-1659-2",
"PackageDescription": "25 VIAL, GLASS in 1 CARTON (80830-1659-2) / 1 mL in 1 VIAL, GLASS (80830-1659-1) ",
"NDC11Code": "80830-1659-02",
"ProductNDC": "80830-1659",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Epinephrine",
"NonProprietaryName": "Epinephrine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20251208",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218208",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "EPINEPHRINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251208",
"SamplePackage": "N",
"IndicationAndUsage": "Epinephrine is a non-selective alpha and beta adrenergic agonist indicated for: 1 Emergency treatment of allergic reactions (Type 1), including anaphylaxis. (1.1), 2 To increase mean arterial blood pressure in adult patients with hypotension associated with septic shock. (1.2).",
"Description": "Epinephrine Injection, USP is a clear, colorless, sterile solution containing 1 mg/mL epinephrine USP, packaged as 1 mL of solution in a single-dose clear glass vial. In the 1 mL vial, each 1 mL of epinephrine injection, USP solution contains 1 mg epinephrine, USP; 9 mg sodium chloride; 1 mg sodium metabisulfite; hydrochloric acid to adjust pH and water for injection. The pH range is 2.2 to 5.0. Epinephrine is a sympathomimetic catecholamine. The chemical name of epinephrine is: 1,2-Benzenediol, 4-[1-hydroxy-2-(methylamino)ethyl]-,(R)- or (-)-3,4-Dihydroxy-α-[(methylamino)methyl]benzyl alcohol. Its chemical structure is. The molecular weight of epinephrine is 183.2 g/mol and molecular formula is C9H13NO3. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin."
},
{
"NDCCode": "80830-1672-2",
"PackageDescription": "10 VIAL in 1 CARTON (80830-1672-2) / 10 mL in 1 VIAL (80830-1672-1) ",
"NDC11Code": "80830-1672-02",
"ProductNDC": "80830-1672",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Calcium Gluconate",
"NonProprietaryName": "Calcium Gluconate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240513",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216611",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "CALCIUM GLUCONATE MONOHYDRATE",
"StrengthNumber": "98",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240513",
"SamplePackage": "N",
"IndicationAndUsage": "Calcium gluconate injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.",
"Description": "Calcium gluconate injection USP, 100 mg per mL is a sterile, clear, colorless to slightly yellow, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of calcium gluconate injection, USP contains: 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of calcium gluconate injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium."
},
{
"NDCCode": "80830-1673-2",
"PackageDescription": "10 VIAL in 1 CARTON (80830-1673-2) / 50 mL in 1 VIAL (80830-1673-1) ",
"NDC11Code": "80830-1673-02",
"ProductNDC": "80830-1673",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Calcium Gluconate",
"NonProprietaryName": "Calcium Gluconate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240513",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216611",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "CALCIUM GLUCONATE MONOHYDRATE",
"StrengthNumber": "98",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240513",
"SamplePackage": "N",
"IndicationAndUsage": "Calcium gluconate injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.",
"Description": "Calcium gluconate injection USP, 100 mg per mL is a sterile, clear, colorless to slightly yellow, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of calcium gluconate injection, USP contains: 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of calcium gluconate injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium."
},
{
"NDCCode": "80830-1674-2",
"PackageDescription": "10 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (80830-1674-2) / 100 mL in 1 VIAL, PHARMACY BULK PACKAGE (80830-1674-8) ",
"NDC11Code": "80830-1674-02",
"ProductNDC": "80830-1674",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Calcium Gluconate",
"NonProprietaryName": "Calcium Gluconate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240513",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216611",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "CALCIUM GLUCONATE MONOHYDRATE",
"StrengthNumber": "98",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240513",
"SamplePackage": "N",
"IndicationAndUsage": "Calcium gluconate injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.",
"Description": "Calcium gluconate injection USP, 100 mg per mL is a sterile, clear, colorless to slightly yellow, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of calcium gluconate injection, USP contains: 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of calcium gluconate injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium."
},
{
"NDCCode": "80830-1683-3",
"PackageDescription": "5 TRAY in 1 CARTON (80830-1683-3) / 5 VIAL, GLASS in 1 TRAY (80830-1683-2) / 1 mL in 1 VIAL, GLASS",
"NDC11Code": "80830-1683-03",
"ProductNDC": "80830-1683",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phytonadione",
"NonProprietaryName": "Phytonadione",
"DosageFormName": "INJECTION, EMULSION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20260601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217734",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "PHYTONADIONE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Prothrombin Activity [PE], Reversed Anticoagulation Activity [PE], Vitamin K [CS], Vitamin K [EPC], Warfarin Reversal Agent [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260601",
"SamplePackage": "N",
"IndicationAndUsage": "Phytonadione injectable emulsion is a vitamin K replacement indicated for the treatment of the following coagulation disorders which are due to faulty formation of factors II, VII, IX and X when caused by vitamin K deficiency or interference with vitamin K activity. : 1 Anticoagulant-induced hypoprothrombinemia deficiency caused by coumarin or indanedione derivatives. (1.1), 2 Hypoprothrombinemia due to antibacterial therapy. (1.1), 3 Hypoprothrombinemia secondary to factors limiting absorption or synthesis of vitamin K, e.g., obstructive jaundice, biliary fistula, sprue, ulcerative colitis, celiac disease, intestinal resection, cystic fibrosis of the pancreas, and regional enteritis. (1.1), 4 Other drug-induced hypoprothrombinemia where it is definitely shown that the result is due to interference with vitamin K metabolism, e.g., salicylates. (1.1).",
"Description": "Phytonadione, USP is a vitamin K replacement, which is a clear, yellow to amber, very viscous liquid. It is soluble in dehydrated alcohol, in benzene, in chloroform, in ether and in vegetable oils; slightly soluble in alcohol and insoluble in water. It has a molecular weight of 450.70 g/mol. Phytonadione is 2-Methyl-3-(3,7,11,15-tetramethylhexadec-2-en-1-yl)naphthalene-1,4-dione. It’s molecular formula is C31H46O2 and its molecular structure is. Phytonadione injectable emulsion, USP is a clear, yellow color, sterile, nonpyrogenic aqueous dispersion available for injection by the intravenous, intramuscular and subcutaneous routes. Phytonadione injectable emulsion, USP is available in 10 mg (10 mg/mL) single-dose vial. Each milliliter contains phytonadione USP, 10 mg; polyoxyethylated fatty acid derivative 70 mg; citric acid monohydrate 1 mg; disodium hydrogen phosphate dihydrate 3 mg and dextrose, hydrous 37.5 mg in water for injection. May contain hydrochloric acid for pH adjustment. pH is 6.3 (5.0 to 7.0). Phytonadione is oxygen sensitive."
},
{
"NDCCode": "80830-1691-2",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (80830-1691-2) / 15 mL in 1 VIAL, SINGLE-DOSE (80830-1691-1) ",
"NDC11Code": "80830-1691-02",
"ProductNDC": "80830-1691",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Phosphates",
"NonProprietaryName": "Potassium Phosphate, Monobasic Potassium Phosphate, Dibasic Injection,",
"DosageFormName": "SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20231023",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216344",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "POTASSIUM PHOSPHATE, MONOBASIC; POTASSIUM PHOSPHATE, DIBASIC",
"StrengthNumber": "224; 236",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231023",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium phosphates injection is indicated as a source of phosphorus: : 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated. , 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated. .",
"Description": "Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile clear, colorless, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate, USP and dibasic potassium phosphate, USP in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial. Monobasic potassium phosphate, USP is chemically designated potassium dihydrogen phosphate. The molecular formula is KH2PO4, molecular weight is 136.084 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water and practically insoluble in alcohol. Dibasic potassium phosphate, USP is chemically designated dipotassium hydrogen phosphate. The molecular formula is K2HPO4, molecular weight is 174.18 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water. Each mL of Potassium Phosphates Injection, USP contains monobasic potassium phosphate USP, 224 mg; dibasic potassium phosphate USP, 236 mg and water for injection. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route."
},
{
"NDCCode": "80830-1692-2",
"PackageDescription": "10 VIAL in 1 CARTON (80830-1692-2) / 50 mL in 1 VIAL (80830-1692-1) ",
"NDC11Code": "80830-1692-02",
"ProductNDC": "80830-1692",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Phosphates",
"NonProprietaryName": "Potassium Phosphate, Monobasic Potassium Phosphate, Dibasic Injection,",
"DosageFormName": "SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20231023",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216344",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "POTASSIUM PHOSPHATE, MONOBASIC; POTASSIUM PHOSPHATE, DIBASIC",
"StrengthNumber": "224; 236",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231023",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium phosphates injection is indicated as a source of phosphorus: : 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated. , 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated. .",
"Description": "Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile clear, colorless, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate, USP and dibasic potassium phosphate, USP in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial. Monobasic potassium phosphate, USP is chemically designated potassium dihydrogen phosphate. The molecular formula is KH2PO4, molecular weight is 136.084 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water and practically insoluble in alcohol. Dibasic potassium phosphate, USP is chemically designated dipotassium hydrogen phosphate. The molecular formula is K2HPO4, molecular weight is 174.18 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water. Each mL of Potassium Phosphates Injection, USP contains monobasic potassium phosphate USP, 224 mg; dibasic potassium phosphate USP, 236 mg and water for injection. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route."
},
{
"NDCCode": "80830-2305-2",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (80830-2305-2) / 50 mL in 1 VIAL, SINGLE-DOSE (80830-2305-1) ",
"NDC11Code": "80830-2305-02",
"ProductNDC": "80830-2305",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Bicarbonate",
"NonProprietaryName": "Sodium Bicarbonate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260113",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217523",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "SODIUM BICARBONATE",
"StrengthNumber": "84",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Alkalinizing Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260113",
"SamplePackage": "N",
"IndicationAndUsage": "Sodium bicarbonate injection is indicated in the treatment of metabolic acidosis which may occur in severe renal disease, uncontrolled diabetes, circulatory insufficiency due to shock or severe dehydration, extracorporeal circulation of blood, cardiac arrest and severe primary lactic acidosis. Sodium bicarbonate is further indicated in the treatment of certain drug intoxications, including barbiturates (where dissociation of the barbiturate-protein complex is desired), in poisoning by salicylates or methyl alcohol and in hemolytic reactions requiring alkalinization of the urine to diminish nephrotoxicity of hemoglobin and its breakdown products. Sodium bicarbonate also is indicated in severe diarrhea which is often accompanied by a significant loss of bicarbonate. Treatment of metabolic acidosis should, if possible, be superimposed on measures designed to control the basic cause of the acidosis - e.g., insulin in uncomplicated diabetes, blood volume restoration in shock. But since an appreciable time interval may elapse before all of the ancillary effects are brought about, bicarbonate therapy is indicated to minimize risks inherent to the acidosis itself. Vigorous bicarbonate therapy is required in any form of metabolic acidosis where a rapid increase in plasma total CO2 content is crucial - e.g., cardiac arrest, circulatory insufficiency due to shock or severe dehydration, and in severe primary lactic acidosis or severe diabetic acidosis.",
"Description": "Sodium bicarbonate injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO3) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solution is offered in concentration of 8.4%. See table in HOW SUPPLIED section for contents and characteristics. The solution contains no bacteriostat, antimicrobial agent or added buffer and are intended only for use as a single-dose injection, the approximate pH of the solution is between 7.0 to 8.5. When smaller doses are required, the unused portion should be discarded. Sodium bicarbonate USP, 84 mg is equal to one milliequivalent each of Na+ and HCO3-. Sodium bicarbonate, USP is chemically designated NaHCO3, a white crystalline powder soluble in water and insoluble in ethanol. Water for injection, USP is chemically designated H2O."
},
{
"NDCCode": "80830-2329-2",
"PackageDescription": "10 POUCH in 1 CARTON (80830-2329-2) / 1 BAG in 1 POUCH / 100 mL in 1 BAG",
"NDC11Code": "80830-2329-02",
"ProductNDC": "80830-2329",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tranexamic Acid In Sodium Chloride",
"NonProprietaryName": "Tranexamic Acid",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20231023",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217155",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "TRANEXAMIC ACID",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antifibrinolytic Agent [EPC], Decreased Fibrinolysis [PE]",
"Status": "Active",
"LastUpdate": "2025-05-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231023",
"SamplePackage": "N",
"IndicationAndUsage": "Tranexamic acid in 0.7% sodium chloride injection is indicated in patients with hemophilia for short-term use (two to eight days) to reduce or prevent hemorrhage and reduce the need for replacement therapy during and following tooth extraction.",
"Description": "Tranexamic acid, USP is trans-4-(aminomethyl)cyclohexanecarboxylic acid, an antifibrinolytic agent. Tranexamic acid, USP is a white, crystalline powder. The structural formula is. Molecular Formula: C8H15NO2 Molecular Weight: 157.21 g/mol. Tranexamic Acid in 0.7% Sodium Chloride Injection, 1,000 mg per 100 mL (10 mg per mL) is a sterile, clear, colorless, nonpyrogenic injectable solution for intravenous administration. Each IV bag contains: 1,000 mg of tranexamic acid, USP; 700 mg of sodium chloride, USP and water for injection, USP. The aqueous solution has a pH of 6.5 to 8.0."
},
{
"NDCCode": "80830-2362-2",
"PackageDescription": "12 POUCH in 1 CARTON (80830-2362-2) / 1 BAG in 1 POUCH / 50 mL in 1 BAG",
"NDC11Code": "80830-2362-02",
"ProductNDC": "80830-2362",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Calcium Gluconate",
"NonProprietaryName": "Calcium Gluconate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230908",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217174",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "CALCIUM GLUCONATE MONOHYDRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2025-05-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231108",
"SamplePackage": "N",
"IndicationAndUsage": "Calcium gluconate in sodium chloride injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.",
"Description": "Calcium gluconate in sodium chloride injection is a sterile, clear, colorless, preservative-free, nonpyrogenic, solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14 H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate in Sodium Chloride Injection is available as 1,000 mg per 50 mL (18.8 mg per mL) or 2,000 mg per 100 mL (18.8 mg per mL) filled in single-dose infusion bags. Each mL of calcium gluconate in sodium chloride injection contains 20 mg of calcium gluconate (equivalent to 18.8 mg of calcium gluconate and 0.9 mg of calcium saccharate tetrahydrate), 6.75 mg sodium chloride as tonicity adjustor, hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and water for injection. Each mL of calcium gluconate in sodium chloride injection contains 1.86 mg (0.093 mEq) of elemental calcium."
},
{
"NDCCode": "80830-2363-2",
"PackageDescription": "12 POUCH in 1 CARTON (80830-2363-2) / 1 BAG in 1 POUCH / 100 mL in 1 BAG",
"NDC11Code": "80830-2363-02",
"ProductNDC": "80830-2363",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Calcium Gluconate",
"NonProprietaryName": "Calcium Gluconate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230908",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217174",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "CALCIUM GLUCONATE MONOHYDRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2025-05-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231108",
"SamplePackage": "N",
"IndicationAndUsage": "Calcium gluconate in sodium chloride injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.",
"Description": "Calcium gluconate in sodium chloride injection is a sterile, clear, colorless, preservative-free, nonpyrogenic, solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14 H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate in Sodium Chloride Injection is available as 1,000 mg per 50 mL (18.8 mg per mL) or 2,000 mg per 100 mL (18.8 mg per mL) filled in single-dose infusion bags. Each mL of calcium gluconate in sodium chloride injection contains 20 mg of calcium gluconate (equivalent to 18.8 mg of calcium gluconate and 0.9 mg of calcium saccharate tetrahydrate), 6.75 mg sodium chloride as tonicity adjustor, hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and water for injection. Each mL of calcium gluconate in sodium chloride injection contains 1.86 mg (0.093 mEq) of elemental calcium."
},
{
"NDCCode": "80830-2435-2",
"PackageDescription": "25 BOTTLE, PLASTIC in 1 CARTON (80830-2435-2) / 20 mL in 1 BOTTLE, PLASTIC (80830-2435-1) ",
"NDC11Code": "80830-2435-02",
"ProductNDC": "80830-2435",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Acetate",
"NonProprietaryName": "Sodium Acetate",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260303",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218469",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "SODIUM ACETATE ANHYDROUS",
"StrengthNumber": "164",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2026-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260303",
"SamplePackage": "N",
"IndicationAndUsage": "Sodium acetate injection, 40 mEq is indicated as a source of sodium, for addition to large volume intravenous fluids to prevent or correct hyponatremia in patients with restricted or no oral intake. It is also useful as an additive for preparing specific intravenous fluid formulas when the needs of the patient cannot be met by standard electrolyte or nutrient solutions.",
"Description": "Sodium acetate injection USP, 40 mEq (2 mEq/mL) is a sterile, clear, colorless, nonpyrogenic, concentrated solution of sodium acetate in water for injection. The solution is administered, after dilution, by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each 20 mL contains 3.28 g of sodium acetate, USP (anhydrous) which provides 40 mEq each of sodium (Na+) and acetate (CH3COO−). The solution contains no bacteriostat, antimicrobial agent or added buffer. May contain acetic acid for pH adjustment; the pH is 6.0 to 7.0. The osmolar concentration is 4 mOsmol/mL (calc). The solution is intended as an alternative to sodium chloride to provide sodium ion (Na+) for addition to large volume infusion fluids for intravenous use. Sodium acetate, USP (anhydrous) is chemically designated CH3COONa, a hygroscopic powder freely soluble in water."
},
{
"NDCCode": "80830-2437-2",
"PackageDescription": "10 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (80830-2437-2) / 100 mL in 1 VIAL, PHARMACY BULK PACKAGE (80830-2437-1) ",
"NDC11Code": "80830-2437-02",
"ProductNDC": "80830-2437",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Acetate",
"NonProprietaryName": "Sodium Acetate",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250812",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218469",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "SODIUM ACETATE ANHYDROUS",
"StrengthNumber": "164",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2025-08-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250812",
"SamplePackage": "N",
"IndicationAndUsage": "Sodium acetate injection, 2 mEq/mL is indicated as a source of sodium for addition to large volume intravenous fluids to prevent or correct hyponatremia in patients with restricted or no oral intake. It is also useful as an additive for preparing specific intravenous fluid formulas when the needs of the patient cannot be met by standard electrolyte or nutrient solutions.",
"Description": "Sodium acetate injection, USP (2 mEq/mL) is a sterile, clear, colorless, nonpyrogenic, concentrated solution of sodium acetate in water for injection. The solution is administered after dilution by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each mL contains 164 mg of sodium acetate, USP (anhydrous) which provides 2 mEq each of sodium (Na+) and acetate (CH3COO-). The solution contains no bacteriostat, antimicrobial agent or added buffer. May contain acetic acid for pH adjustment; the pH is 6.5 (6.0 to 7.0). The osmolar concentration is 4 mOsmol/mL (calc.); specific gravity 1.081. The solution is intended as an alternative to sodium chloride to provide sodium ion (Na+) for addition to large volume infusion fluids for intravenous use. Sodium acetate, USP, anhydrous is chemically designated CH3COONa, a hygroscopic powder freely soluble in water. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture program and are restricted to the preparation of admixtures for intravenous infusion."
},
{
"NDCCode": "80830-2466-2",
"PackageDescription": "10 BOTTLE, PLASTIC in 1 CARTON (80830-2466-2) / 50 mL in 1 BOTTLE, PLASTIC (80830-2466-1) ",
"NDC11Code": "80830-2466-02",
"ProductNDC": "80830-2466",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iohexol",
"NonProprietaryName": "Iohexol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRA-ARTICULAR; INTRATHECAL; INTRAVASCULAR; INTRAVENOUS; ORAL; RECTAL",
"StartMarketingDate": "20260625",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217737",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "IOHEXOL",
"StrengthNumber": "300",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260625",
"SamplePackage": "N",
"IndicationAndUsage": "Iohexol is a radiographic contrast agent indicated for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular and body cavity imaging procedures in adults and pediatric patients. (1).",
"Description": "Iohexol, USP is a nonionic radiographic contrast agent available as: 1 Iohexol injection for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular and body cavity use."
},
{
"NDCCode": "80830-2467-2",
"PackageDescription": "10 BOTTLE, PLASTIC in 1 CARTON (80830-2467-2) / 75 mL in 1 BOTTLE, PLASTIC (80830-2467-1) ",
"NDC11Code": "80830-2467-02",
"ProductNDC": "80830-2467",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iohexol",
"NonProprietaryName": "Iohexol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRA-ARTICULAR; INTRATHECAL; INTRAVASCULAR; INTRAVENOUS; ORAL; RECTAL",
"StartMarketingDate": "20251113",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217737",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "IOHEXOL",
"StrengthNumber": "300",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251113",
"SamplePackage": "N",
"IndicationAndUsage": "Iohexol is a radiographic contrast agent indicated for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular and body cavity imaging procedures in adults and pediatric patients. (1).",
"Description": "Iohexol, USP is a nonionic radiographic contrast agent available as: 1 Iohexol injection for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular and body cavity use."
},
{
"NDCCode": "80830-2468-2",
"PackageDescription": "10 BOTTLE, PLASTIC in 1 CARTON (80830-2468-2) / 100 mL in 1 BOTTLE, PLASTIC (80830-2468-1) ",
"NDC11Code": "80830-2468-02",
"ProductNDC": "80830-2468",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iohexol",
"NonProprietaryName": "Iohexol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRA-ARTICULAR; INTRATHECAL; INTRAVASCULAR; INTRAVENOUS; ORAL; RECTAL",
"StartMarketingDate": "20251113",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217737",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "IOHEXOL",
"StrengthNumber": "300",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251113",
"SamplePackage": "N",
"IndicationAndUsage": "Iohexol is a radiographic contrast agent indicated for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular and body cavity imaging procedures in adults and pediatric patients. (1).",
"Description": "Iohexol, USP is a nonionic radiographic contrast agent available as: 1 Iohexol injection for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular and body cavity use."
},
{
"NDCCode": "80830-2471-2",
"PackageDescription": "10 BOTTLE, PLASTIC in 1 CARTON (80830-2471-2) / 50 mL in 1 BOTTLE, PLASTIC (80830-2471-1) ",
"NDC11Code": "80830-2471-02",
"ProductNDC": "80830-2471",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iohexol",
"NonProprietaryName": "Iohexol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRA-ARTICULAR; INTRATHECAL; INTRAVASCULAR; INTRAVENOUS; ORAL; RECTAL",
"StartMarketingDate": "20260625",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217737",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "IOHEXOL",
"StrengthNumber": "350",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260625",
"SamplePackage": "N",
"IndicationAndUsage": "Iohexol is a radiographic contrast agent indicated for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular and body cavity imaging procedures in adults and pediatric patients. (1).",
"Description": "Iohexol, USP is a nonionic radiographic contrast agent available as: 1 Iohexol injection for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular and body cavity use."
},
{
"NDCCode": "80830-2472-2",
"PackageDescription": "10 BOTTLE, PLASTIC in 1 CARTON (80830-2472-2) / 75 mL in 1 BOTTLE, PLASTIC (80830-2472-1) ",
"NDC11Code": "80830-2472-02",
"ProductNDC": "80830-2472",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iohexol",
"NonProprietaryName": "Iohexol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRA-ARTICULAR; INTRATHECAL; INTRAVASCULAR; INTRAVENOUS; ORAL; RECTAL",
"StartMarketingDate": "20260625",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217737",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "IOHEXOL",
"StrengthNumber": "350",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260625",
"SamplePackage": "N",
"IndicationAndUsage": "Iohexol is a radiographic contrast agent indicated for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular and body cavity imaging procedures in adults and pediatric patients. (1).",
"Description": "Iohexol, USP is a nonionic radiographic contrast agent available as: 1 Iohexol injection for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular and body cavity use."
},
{
"NDCCode": "80830-2473-2",
"PackageDescription": "10 BOTTLE, PLASTIC in 1 CARTON (80830-2473-2) / 100 mL in 1 BOTTLE, PLASTIC (80830-2473-1) ",
"NDC11Code": "80830-2473-02",
"ProductNDC": "80830-2473",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iohexol",
"NonProprietaryName": "Iohexol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRA-ARTICULAR; INTRATHECAL; INTRAVASCULAR; INTRAVENOUS; ORAL; RECTAL",
"StartMarketingDate": "20260625",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217737",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "IOHEXOL",
"StrengthNumber": "350",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260625",
"SamplePackage": "N",
"IndicationAndUsage": "Iohexol is a radiographic contrast agent indicated for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular and body cavity imaging procedures in adults and pediatric patients. (1).",
"Description": "Iohexol, USP is a nonionic radiographic contrast agent available as: 1 Iohexol injection for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular and body cavity use."
},
{
"NDCCode": "80830-2613-2",
"PackageDescription": "6 POUCH in 1 CARTON (80830-2613-2) / 1 BAG in 1 POUCH (80830-2613-1) / 1000 mL in 1 BAG",
"NDC11Code": "80830-2613-02",
"ProductNDC": "80830-2613",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Bicarbonate",
"NonProprietaryName": "Sodium Bicarbonate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260713",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA220790",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "SODIUM BICARBONATE",
"StrengthNumber": "12.6",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Alkalinizing Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260713",
"SamplePackage": "N",
"IndicationAndUsage": "Sodium bicarbonate injection is an alkalinizing agent indicated: 1 to raise plasma pH in adults and pediatric patients with clinically significant metabolic acidosis. (1.1) , 2 to alkalinize the urine in drug poisoning in adult and pediatric patients in cases in which urinary drug elimination is enhanced by urinary alkalinaztion. (1.2).",
"Description": "Sodium bicarbonate injection, USP is an alkalinizing agent, supplied as a sterile, nonpyrogenic, clear, colorless, ready-to-use solution of sodium bicarbonate (NaHCO3) in water for injection for administration by the intravenous infusion as an electrolyte replenisher and systemic alkalizer. Sodium bicarbonate, 12.6 mg is equal to 0.15 milliequivalent each of Na+ and HCO3-. Sodium bicarbonate, USP is chemically designated NaHCO3, molecular weight 84.01 g/mol, a white crystalline powder soluble in water and insoluble in ethanol. Solution is offered in concentration of 1.26% [see How Supplied Storage and Handling (16.1)]. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only for use as an intravenous infusion. Carbon dioxide is added to adjust pH between 7 to 8.5. When smaller doses are required, the unused portion should be discarded."
},
{
"NDCCode": "0591-2436-15",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (0591-2436-15) / 10 CAPSULE in 1 BLISTER PACK (0591-2436-45) ",
"NDC11Code": "00591-2436-15",
"ProductNDC": "0591-2436",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isotretinoin",
"NonProprietaryName": "Isotretinoin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20210429",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205063",
"LabelerName": "Actavis Pharma, Inc.",
"SubstanceName": "ISOTRETINOIN",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Active",
"LastUpdate": "2026-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210429",
"SamplePackage": "N",
"IndicationAndUsage": "Isotretinoin capsules are indicated for the treatment of severe recalcitrant nodular acne in non-pregnant patients 12 years of age and older with multiple inflammatory nodules with a diameter of 5 mm or greater. Because of significant adverse reactions associated with its use, isotretinoin capsules are reserved for patients with severe nodular acne who are unresponsive to conventional therapy, including systemic antibiotics. Limitations of Use. If a second course of isotretinoin capsules treatment is needed, it is not recommended before a 2-month waiting period because the patient’s acne may continue to improve following a 15 to 20-week course of treatment [see Dosage and Administration (2.2)].",
"Description": "Isotretinoin capsules, USP contain 10 mg, 20 mg, 25 mg, 30 mg, 35 mg or 40 mg of isotretinoin, USP (a retinoid) in hard gelatin capsules for oral administration. In addition to the active ingredient, isotretinoin USP, each capsule contains the following inactive ingredients: sorbitan monooleate, soybean oil, stearoyl polyoxyglycerides, and vitamin E. The capsule shells contain the following: 1 10 mg - FD&C Blue No. 1, gelatin, and titanium dioxide, 2 20 mg - FD&C Blue No. 1, gelatin, iron oxide yellow, and titanium dioxide, 3 25 mg - D&C Yellow No. 10, FD&C Blue No. 1, FD&C Green No. 3, gelatin, and titanium dioxide, 4 30 mg - FD&C Blue No. 1, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate, and titanium dioxide, 5 35 mg - FD&C Blue No. 1, FD&C Red No. 40, gelatin, and titanium dioxide, 6 40 mg - FD&C Blue No. 1, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate, and titanium dioxide."
},
{
"NDCCode": "22840-2436-4",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (22840-2436-4) ",
"NDC11Code": "22840-2436-04",
"ProductNDC": "22840-2436",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Western Juniper Pollen",
"NonProprietaryName": "Juniperus Occidentalis",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "JUNIPERUS OCCIDENTALIS POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.",
"Description": "Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter."
},
{
"NDCCode": "29500-2436-1",
"PackageDescription": "9.4 g in 1 TUBE (29500-2436-1)",
"NDC11Code": "29500-2436-01",
"ProductNDC": "29500-2436",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Triple Antibiotic",
"ProprietaryNameSuffix": "Extra Strength",
"NonProprietaryName": "Bacitracin Zinc, Neomycin Sulfate, Polymyxin B Sulfate",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20130710",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part333B",
"LabelerName": "Personal Care Products, Inc.",
"SubstanceName": "BACITRACIN ZINC; NEOMYCIN SULFATE; POLYMYXIN B SULFATE",
"StrengthNumber": "400; 3.5; 5000",
"StrengthUnit": "[iU]/9.4g; mg/9.4g; [iU]/9.4g",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "First aid to help prevent infection in minor: 1 cuts, 2 scrapes, 3 burns."
},
{
"NDCCode": "53002-2436-3",
"PackageDescription": "1 INHALER in 1 CARTON (53002-2436-3) / 1 AEROSOL, METERED in 1 INHALER",
"NDC11Code": "53002-2436-03",
"ProductNDC": "53002-2436",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Qvar Redihaler",
"NonProprietaryName": "Beclomethasone Dipropionate Hfa",
"DosageFormName": "AEROSOL, METERED",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20180215",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA207921",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "BECLOMETHASONE DIPROPIONATE",
"StrengthNumber": "40",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20181001",
"SamplePackage": "N",
"IndicationAndUsage": "QVAR REDIHALER is indicated in the maintenance treatment of asthma as prophylactic therapy in adults and pediatric patients 4 years of age and older. Limitations of Use. QVAR REDIHALER is not indicated for the relief of acute bronchospasm.",
"Description": "The active component of QVAR REDIHALER 40 mcg Inhalation Aerosol and QVAR REDIHALER 80 mcg Inhalation Aerosol is beclomethasone dipropionate, USP, a corticosteroid having the chemical name 9-chloro-11ß,17,21-trihydroxy-16ß-methylpregna-1,4-diene-3,20-dione 17,21-dipropionate. Beclomethasone dipropionate is a diester of beclomethasone, a synthetic corticosteroid chemically related to dexamethasone. Beclomethasone differs from dexamethasone in having a chlorine at the 9‑alpha carbon in place of a fluorine, and in having a 16‑beta-methyl group instead of a 16‑alpha-methyl group. Beclomethasone dipropionate is a white to creamy white, odorless powder with a molecular formula of C28H37ClO7 and a molecular weight of 521.1. Its chemical structure is. QVAR REDIHALER is a pressurized, breath‑actuated, metered‑dose aerosol with a dose counter intended for oral inhalation only. Each unit consists of a sealed breath‑actuated inhaler device enclosing a canister containing a solution of beclomethasone dipropionate in propellant HFA‑134a (1,1,1,2 tetrafluoroethane) and ethanol (0.85 g). QVAR REDIHALER 40 mcg delivers 40 mcg of beclomethasone dipropionate from the actuator mouthpiece and 50 mcg from the canister valve. QVAR REDIHALER 80 mcg delivers 80 mcg of beclomethasone dipropionate from the actuator mouthpiece and 100 mcg from the canister valve. Both products deliver 50 microliters (59 milligrams) of solution formulation as an aerosol from the canister valve with each actuation. The 40‑mcg canisters and the 80‑mcg canisters provide 120 inhalations each. Since the QVAR REDIHALER canister is fitted with a primeless valve, no priming actuations are required before use. For both products, an actuation was always triggered by a 20 L/min inspiratory flow rate."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>80830-2436-2</NDCCode>
<PackageDescription>25 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (80830-2436-2) / 50 mL in 1 VIAL, PHARMACY BULK PACKAGE (80830-2436-1) </PackageDescription>
<NDC11Code>80830-2436-02</NDC11Code>
<ProductNDC>80830-2436</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Acetate</ProprietaryName>
<NonProprietaryName>Sodium Acetate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250812</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218469</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>SODIUM ACETATE ANHYDROUS</SubstanceName>
<StrengthNumber>164</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-08-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250812</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sodium acetate injection, 2 mEq/mL is indicated as a source of sodium for addition to large volume intravenous fluids to prevent or correct hyponatremia in patients with restricted or no oral intake. It is also useful as an additive for preparing specific intravenous fluid formulas when the needs of the patient cannot be met by standard electrolyte or nutrient solutions.</IndicationAndUsage>
<Description>Sodium acetate injection, USP (2 mEq/mL) is a sterile, clear, colorless, nonpyrogenic, concentrated solution of sodium acetate in water for injection. The solution is administered after dilution by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each mL contains 164 mg of sodium acetate, USP (anhydrous) which provides 2 mEq each of sodium (Na+) and acetate (CH3COO-). The solution contains no bacteriostat, antimicrobial agent or added buffer. May contain acetic acid for pH adjustment; the pH is 6.5 (6.0 to 7.0). The osmolar concentration is 4 mOsmol/mL (calc.); specific gravity 1.081. The solution is intended as an alternative to sodium chloride to provide sodium ion (Na+) for addition to large volume infusion fluids for intravenous use. Sodium acetate, USP, anhydrous is chemically designated CH3COONa, a hygroscopic powder freely soluble in water. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture program and are restricted to the preparation of admixtures for intravenous infusion.</Description>
</NDC>
<NDC>
<NDCCode>22840-2436-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (22840-2436-2) </PackageDescription>
<NDC11Code>22840-2436-02</NDC11Code>
<ProductNDC>22840-2436</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Western Juniper Pollen</ProprietaryName>
<NonProprietaryName>Juniperus Occidentalis</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>JUNIPERUS OCCIDENTALIS POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.</IndicationAndUsage>
<Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
</NDC>
<NDC>
<NDCCode>36987-2436-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (36987-2436-2)</PackageDescription>
<NDC11Code>36987-2436-02</NDC11Code>
<ProductNDC>36987-2436</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Soft Cheat Brome</ProprietaryName>
<NonProprietaryName>Soft Cheat Brome</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>BROMUS INERMIS POLLEN</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>37662-2436-2</NDCCode>
<PackageDescription>500 PELLET in 1 VIAL, GLASS (37662-2436-2) </PackageDescription>
<NDC11Code>37662-2436-02</NDC11Code>
<ProductNDC>37662-2436</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Mercurius Iodatus Flavus</ProprietaryName>
<NonProprietaryName>Mercurius Iodatus Flavus</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230119</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>MERCUROUS IODIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_M]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-01-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230119</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>49452-2436-2</NDCCode>
<PackageDescription>5 g in 1 BOTTLE (49452-2436-2) </PackageDescription>
<NDC11Code>49452-2436-02</NDC11Code>
<ProductNDC>49452-2436</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Danazol</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>19951201</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Spectrum Laboratory Products, Inc.</LabelerName>
<SubstanceName>DANAZOL</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2023-10-06</LastUpdate>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>01-DEC-95</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>71335-2436-2</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (71335-2436-2) </PackageDescription>
<NDC11Code>71335-2436-02</NDC11Code>
<ProductNDC>71335-2436</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Donepezil Hydrochloride</ProprietaryName>
<NonProprietaryName>Donepezil Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210629</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078662</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>DONEPEZIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240715</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Donepezil Hydrochloride tablets are indicated for the treatment of dementia of the Alzheimer’s type. Efficacy has been demonstrated in patients with mild, moderate, and severe Alzheimer’s disease.</IndicationAndUsage>
<Description>Donepezil is a reversible inhibitor of the enzyme acetylcholinesterase, known chemically as (±)-2, 3-dihydro-5, 6-dimethoxy-2-[[1-(phenylmethyl)-4-piperidinyl]methyl]-1H-inden-1-one . Donepezil is commonly referred to in the pharmacological literature as E2020. It has a molecular formula of C24H29NO3HCl and a molecular weight of 415.96. Donepezil USP is a white to off-white powder and is freely soluble in chloroform, soluble in water and in glacial acetic acid, slightly soluble in ethanol and in acetonitrile and practically insoluble in ethyl acetate and in n-hexane. Donepezil hydrochloride USP is available for oral administration in tablets containing 5 mg or 10 mg of donepezil hydrochloride USP. Inactive ingredients are croscarmellose sodium, lactose, magnesium stearate, and microcrystalline cellulose.</Description>
</NDC>
<NDC>
<NDCCode>80830-1659-2</NDCCode>
<PackageDescription>25 VIAL, GLASS in 1 CARTON (80830-1659-2) / 1 mL in 1 VIAL, GLASS (80830-1659-1) </PackageDescription>
<NDC11Code>80830-1659-02</NDC11Code>
<ProductNDC>80830-1659</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Epinephrine</ProprietaryName>
<NonProprietaryName>Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20251208</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218208</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>EPINEPHRINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251208</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Epinephrine is a non-selective alpha and beta adrenergic agonist indicated for: 1 Emergency treatment of allergic reactions (Type 1), including anaphylaxis. (1.1), 2 To increase mean arterial blood pressure in adult patients with hypotension associated with septic shock. (1.2).</IndicationAndUsage>
<Description>Epinephrine Injection, USP is a clear, colorless, sterile solution containing 1 mg/mL epinephrine USP, packaged as 1 mL of solution in a single-dose clear glass vial. In the 1 mL vial, each 1 mL of epinephrine injection, USP solution contains 1 mg epinephrine, USP; 9 mg sodium chloride; 1 mg sodium metabisulfite; hydrochloric acid to adjust pH and water for injection. The pH range is 2.2 to 5.0. Epinephrine is a sympathomimetic catecholamine. The chemical name of epinephrine is: 1,2-Benzenediol, 4-[1-hydroxy-2-(methylamino)ethyl]-,(R)- or (-)-3,4-Dihydroxy-α-[(methylamino)methyl]benzyl alcohol. Its chemical structure is. The molecular weight of epinephrine is 183.2 g/mol and molecular formula is C9H13NO3. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin.</Description>
</NDC>
<NDC>
<NDCCode>80830-1672-2</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (80830-1672-2) / 10 mL in 1 VIAL (80830-1672-1) </PackageDescription>
<NDC11Code>80830-1672-02</NDC11Code>
<ProductNDC>80830-1672</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Calcium Gluconate</ProprietaryName>
<NonProprietaryName>Calcium Gluconate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240513</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216611</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
<StrengthNumber>98</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240513</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Calcium gluconate injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.</IndicationAndUsage>
<Description>Calcium gluconate injection USP, 100 mg per mL is a sterile, clear, colorless to slightly yellow, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of calcium gluconate injection, USP contains: 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of calcium gluconate injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium.</Description>
</NDC>
<NDC>
<NDCCode>80830-1673-2</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (80830-1673-2) / 50 mL in 1 VIAL (80830-1673-1) </PackageDescription>
<NDC11Code>80830-1673-02</NDC11Code>
<ProductNDC>80830-1673</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Calcium Gluconate</ProprietaryName>
<NonProprietaryName>Calcium Gluconate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240513</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216611</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
<StrengthNumber>98</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240513</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Calcium gluconate injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.</IndicationAndUsage>
<Description>Calcium gluconate injection USP, 100 mg per mL is a sterile, clear, colorless to slightly yellow, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of calcium gluconate injection, USP contains: 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of calcium gluconate injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium.</Description>
</NDC>
<NDC>
<NDCCode>80830-1674-2</NDCCode>
<PackageDescription>10 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (80830-1674-2) / 100 mL in 1 VIAL, PHARMACY BULK PACKAGE (80830-1674-8) </PackageDescription>
<NDC11Code>80830-1674-02</NDC11Code>
<ProductNDC>80830-1674</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Calcium Gluconate</ProprietaryName>
<NonProprietaryName>Calcium Gluconate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240513</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216611</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
<StrengthNumber>98</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240513</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Calcium gluconate injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.</IndicationAndUsage>
<Description>Calcium gluconate injection USP, 100 mg per mL is a sterile, clear, colorless to slightly yellow, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of calcium gluconate injection, USP contains: 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of calcium gluconate injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium.</Description>
</NDC>
<NDC>
<NDCCode>80830-1683-3</NDCCode>
<PackageDescription>5 TRAY in 1 CARTON (80830-1683-3) / 5 VIAL, GLASS in 1 TRAY (80830-1683-2) / 1 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>80830-1683-03</NDC11Code>
<ProductNDC>80830-1683</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phytonadione</ProprietaryName>
<NonProprietaryName>Phytonadione</NonProprietaryName>
<DosageFormName>INJECTION, EMULSION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20260601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217734</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>PHYTONADIONE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Prothrombin Activity [PE], Reversed Anticoagulation Activity [PE], Vitamin K [CS], Vitamin K [EPC], Warfarin Reversal Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phytonadione injectable emulsion is a vitamin K replacement indicated for the treatment of the following coagulation disorders which are due to faulty formation of factors II, VII, IX and X when caused by vitamin K deficiency or interference with vitamin K activity. : 1 Anticoagulant-induced hypoprothrombinemia deficiency caused by coumarin or indanedione derivatives. (1.1), 2 Hypoprothrombinemia due to antibacterial therapy. (1.1), 3 Hypoprothrombinemia secondary to factors limiting absorption or synthesis of vitamin K, e.g., obstructive jaundice, biliary fistula, sprue, ulcerative colitis, celiac disease, intestinal resection, cystic fibrosis of the pancreas, and regional enteritis. (1.1), 4 Other drug-induced hypoprothrombinemia where it is definitely shown that the result is due to interference with vitamin K metabolism, e.g., salicylates. (1.1).</IndicationAndUsage>
<Description>Phytonadione, USP is a vitamin K replacement, which is a clear, yellow to amber, very viscous liquid. It is soluble in dehydrated alcohol, in benzene, in chloroform, in ether and in vegetable oils; slightly soluble in alcohol and insoluble in water. It has a molecular weight of 450.70 g/mol. Phytonadione is 2-Methyl-3-(3,7,11,15-tetramethylhexadec-2-en-1-yl)naphthalene-1,4-dione. It’s molecular formula is C31H46O2 and its molecular structure is. Phytonadione injectable emulsion, USP is a clear, yellow color, sterile, nonpyrogenic aqueous dispersion available for injection by the intravenous, intramuscular and subcutaneous routes. Phytonadione injectable emulsion, USP is available in 10 mg (10 mg/mL) single-dose vial. Each milliliter contains phytonadione USP, 10 mg; polyoxyethylated fatty acid derivative 70 mg; citric acid monohydrate 1 mg; disodium hydrogen phosphate dihydrate 3 mg and dextrose, hydrous 37.5 mg in water for injection. May contain hydrochloric acid for pH adjustment. pH is 6.3 (5.0 to 7.0). Phytonadione is oxygen sensitive.</Description>
</NDC>
<NDC>
<NDCCode>80830-1691-2</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (80830-1691-2) / 15 mL in 1 VIAL, SINGLE-DOSE (80830-1691-1) </PackageDescription>
<NDC11Code>80830-1691-02</NDC11Code>
<ProductNDC>80830-1691</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Phosphates</ProprietaryName>
<NonProprietaryName>Potassium Phosphate, Monobasic Potassium Phosphate, Dibasic Injection,</NonProprietaryName>
<DosageFormName>SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20231023</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216344</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>POTASSIUM PHOSPHATE, MONOBASIC; POTASSIUM PHOSPHATE, DIBASIC</SubstanceName>
<StrengthNumber>224; 236</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231023</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium phosphates injection is indicated as a source of phosphorus: : 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated. , 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated. .</IndicationAndUsage>
<Description>Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile clear, colorless, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate, USP and dibasic potassium phosphate, USP in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial. Monobasic potassium phosphate, USP is chemically designated potassium dihydrogen phosphate. The molecular formula is KH2PO4, molecular weight is 136.084 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water and practically insoluble in alcohol. Dibasic potassium phosphate, USP is chemically designated dipotassium hydrogen phosphate. The molecular formula is K2HPO4, molecular weight is 174.18 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water. Each mL of Potassium Phosphates Injection, USP contains monobasic potassium phosphate USP, 224 mg; dibasic potassium phosphate USP, 236 mg and water for injection. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route.</Description>
</NDC>
<NDC>
<NDCCode>80830-1692-2</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (80830-1692-2) / 50 mL in 1 VIAL (80830-1692-1) </PackageDescription>
<NDC11Code>80830-1692-02</NDC11Code>
<ProductNDC>80830-1692</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Phosphates</ProprietaryName>
<NonProprietaryName>Potassium Phosphate, Monobasic Potassium Phosphate, Dibasic Injection,</NonProprietaryName>
<DosageFormName>SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20231023</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216344</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>POTASSIUM PHOSPHATE, MONOBASIC; POTASSIUM PHOSPHATE, DIBASIC</SubstanceName>
<StrengthNumber>224; 236</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231023</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium phosphates injection is indicated as a source of phosphorus: : 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated. , 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated. .</IndicationAndUsage>
<Description>Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile clear, colorless, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate, USP and dibasic potassium phosphate, USP in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial. Monobasic potassium phosphate, USP is chemically designated potassium dihydrogen phosphate. The molecular formula is KH2PO4, molecular weight is 136.084 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water and practically insoluble in alcohol. Dibasic potassium phosphate, USP is chemically designated dipotassium hydrogen phosphate. The molecular formula is K2HPO4, molecular weight is 174.18 g/mol and the structural formula is as below. It appears as colorless crystals or white granular or crystalline powder. It is freely soluble in water. Each mL of Potassium Phosphates Injection, USP contains monobasic potassium phosphate USP, 224 mg; dibasic potassium phosphate USP, 236 mg and water for injection. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route.</Description>
</NDC>
<NDC>
<NDCCode>80830-2305-2</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (80830-2305-2) / 50 mL in 1 VIAL, SINGLE-DOSE (80830-2305-1) </PackageDescription>
<NDC11Code>80830-2305-02</NDC11Code>
<ProductNDC>80830-2305</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Bicarbonate</ProprietaryName>
<NonProprietaryName>Sodium Bicarbonate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260113</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217523</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>SODIUM BICARBONATE</SubstanceName>
<StrengthNumber>84</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Alkalinizing Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260113</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sodium bicarbonate injection is indicated in the treatment of metabolic acidosis which may occur in severe renal disease, uncontrolled diabetes, circulatory insufficiency due to shock or severe dehydration, extracorporeal circulation of blood, cardiac arrest and severe primary lactic acidosis. Sodium bicarbonate is further indicated in the treatment of certain drug intoxications, including barbiturates (where dissociation of the barbiturate-protein complex is desired), in poisoning by salicylates or methyl alcohol and in hemolytic reactions requiring alkalinization of the urine to diminish nephrotoxicity of hemoglobin and its breakdown products. Sodium bicarbonate also is indicated in severe diarrhea which is often accompanied by a significant loss of bicarbonate. Treatment of metabolic acidosis should, if possible, be superimposed on measures designed to control the basic cause of the acidosis - e.g., insulin in uncomplicated diabetes, blood volume restoration in shock. But since an appreciable time interval may elapse before all of the ancillary effects are brought about, bicarbonate therapy is indicated to minimize risks inherent to the acidosis itself. Vigorous bicarbonate therapy is required in any form of metabolic acidosis where a rapid increase in plasma total CO2 content is crucial - e.g., cardiac arrest, circulatory insufficiency due to shock or severe dehydration, and in severe primary lactic acidosis or severe diabetic acidosis.</IndicationAndUsage>
<Description>Sodium bicarbonate injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO3) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solution is offered in concentration of 8.4%. See table in HOW SUPPLIED section for contents and characteristics. The solution contains no bacteriostat, antimicrobial agent or added buffer and are intended only for use as a single-dose injection, the approximate pH of the solution is between 7.0 to 8.5. When smaller doses are required, the unused portion should be discarded. Sodium bicarbonate USP, 84 mg is equal to one milliequivalent each of Na+ and HCO3-. Sodium bicarbonate, USP is chemically designated NaHCO3, a white crystalline powder soluble in water and insoluble in ethanol. Water for injection, USP is chemically designated H2O.</Description>
</NDC>
<NDC>
<NDCCode>80830-2329-2</NDCCode>
<PackageDescription>10 POUCH in 1 CARTON (80830-2329-2) / 1 BAG in 1 POUCH / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>80830-2329-02</NDC11Code>
<ProductNDC>80830-2329</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tranexamic Acid In Sodium Chloride</ProprietaryName>
<NonProprietaryName>Tranexamic Acid</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20231023</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217155</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>TRANEXAMIC ACID</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antifibrinolytic Agent [EPC], Decreased Fibrinolysis [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231023</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tranexamic acid in 0.7% sodium chloride injection is indicated in patients with hemophilia for short-term use (two to eight days) to reduce or prevent hemorrhage and reduce the need for replacement therapy during and following tooth extraction.</IndicationAndUsage>
<Description>Tranexamic acid, USP is trans-4-(aminomethyl)cyclohexanecarboxylic acid, an antifibrinolytic agent. Tranexamic acid, USP is a white, crystalline powder. The structural formula is. Molecular Formula: C8H15NO2 Molecular Weight: 157.21 g/mol. Tranexamic Acid in 0.7% Sodium Chloride Injection, 1,000 mg per 100 mL (10 mg per mL) is a sterile, clear, colorless, nonpyrogenic injectable solution for intravenous administration. Each IV bag contains: 1,000 mg of tranexamic acid, USP; 700 mg of sodium chloride, USP and water for injection, USP. The aqueous solution has a pH of 6.5 to 8.0.</Description>
</NDC>
<NDC>
<NDCCode>80830-2362-2</NDCCode>
<PackageDescription>12 POUCH in 1 CARTON (80830-2362-2) / 1 BAG in 1 POUCH / 50 mL in 1 BAG</PackageDescription>
<NDC11Code>80830-2362-02</NDC11Code>
<ProductNDC>80830-2362</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Calcium Gluconate</ProprietaryName>
<NonProprietaryName>Calcium Gluconate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230908</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217174</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231108</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Calcium gluconate in sodium chloride injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.</IndicationAndUsage>
<Description>Calcium gluconate in sodium chloride injection is a sterile, clear, colorless, preservative-free, nonpyrogenic, solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14 H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate in Sodium Chloride Injection is available as 1,000 mg per 50 mL (18.8 mg per mL) or 2,000 mg per 100 mL (18.8 mg per mL) filled in single-dose infusion bags. Each mL of calcium gluconate in sodium chloride injection contains 20 mg of calcium gluconate (equivalent to 18.8 mg of calcium gluconate and 0.9 mg of calcium saccharate tetrahydrate), 6.75 mg sodium chloride as tonicity adjustor, hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and water for injection. Each mL of calcium gluconate in sodium chloride injection contains 1.86 mg (0.093 mEq) of elemental calcium.</Description>
</NDC>
<NDC>
<NDCCode>80830-2363-2</NDCCode>
<PackageDescription>12 POUCH in 1 CARTON (80830-2363-2) / 1 BAG in 1 POUCH / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>80830-2363-02</NDC11Code>
<ProductNDC>80830-2363</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Calcium Gluconate</ProprietaryName>
<NonProprietaryName>Calcium Gluconate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230908</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217174</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231108</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Calcium gluconate in sodium chloride injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of calcium gluconate injection for long term use has not been established.</IndicationAndUsage>
<Description>Calcium gluconate in sodium chloride injection is a sterile, clear, colorless, preservative-free, nonpyrogenic, solution of calcium gluconate, a form of calcium, for intravenous use. The chemical name of calcium gluconate monohydrate, USP is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14 H2O. Molecular weight: 448.39 g/mol. Solubility in water: 3.5 g/100 mL at 25°C. Calcium gluconate monohydrate, USP is a white, crystalline granules or powder. It is soluble in boiling water, sparingly soluble in water and insoluble in alcohol. Calcium Gluconate in Sodium Chloride Injection is available as 1,000 mg per 50 mL (18.8 mg per mL) or 2,000 mg per 100 mL (18.8 mg per mL) filled in single-dose infusion bags. Each mL of calcium gluconate in sodium chloride injection contains 20 mg of calcium gluconate (equivalent to 18.8 mg of calcium gluconate and 0.9 mg of calcium saccharate tetrahydrate), 6.75 mg sodium chloride as tonicity adjustor, hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and water for injection. Each mL of calcium gluconate in sodium chloride injection contains 1.86 mg (0.093 mEq) of elemental calcium.</Description>
</NDC>
<NDC>
<NDCCode>80830-2435-2</NDCCode>
<PackageDescription>25 BOTTLE, PLASTIC in 1 CARTON (80830-2435-2) / 20 mL in 1 BOTTLE, PLASTIC (80830-2435-1) </PackageDescription>
<NDC11Code>80830-2435-02</NDC11Code>
<ProductNDC>80830-2435</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Acetate</ProprietaryName>
<NonProprietaryName>Sodium Acetate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260303</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218469</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>SODIUM ACETATE ANHYDROUS</SubstanceName>
<StrengthNumber>164</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260303</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sodium acetate injection, 40 mEq is indicated as a source of sodium, for addition to large volume intravenous fluids to prevent or correct hyponatremia in patients with restricted or no oral intake. It is also useful as an additive for preparing specific intravenous fluid formulas when the needs of the patient cannot be met by standard electrolyte or nutrient solutions.</IndicationAndUsage>
<Description>Sodium acetate injection USP, 40 mEq (2 mEq/mL) is a sterile, clear, colorless, nonpyrogenic, concentrated solution of sodium acetate in water for injection. The solution is administered, after dilution, by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each 20 mL contains 3.28 g of sodium acetate, USP (anhydrous) which provides 40 mEq each of sodium (Na+) and acetate (CH3COO−). The solution contains no bacteriostat, antimicrobial agent or added buffer. May contain acetic acid for pH adjustment; the pH is 6.0 to 7.0. The osmolar concentration is 4 mOsmol/mL (calc). The solution is intended as an alternative to sodium chloride to provide sodium ion (Na+) for addition to large volume infusion fluids for intravenous use. Sodium acetate, USP (anhydrous) is chemically designated CH3COONa, a hygroscopic powder freely soluble in water.</Description>
</NDC>
<NDC>
<NDCCode>80830-2437-2</NDCCode>
<PackageDescription>10 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (80830-2437-2) / 100 mL in 1 VIAL, PHARMACY BULK PACKAGE (80830-2437-1) </PackageDescription>
<NDC11Code>80830-2437-02</NDC11Code>
<ProductNDC>80830-2437</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Acetate</ProprietaryName>
<NonProprietaryName>Sodium Acetate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250812</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218469</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>SODIUM ACETATE ANHYDROUS</SubstanceName>
<StrengthNumber>164</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-08-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250812</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sodium acetate injection, 2 mEq/mL is indicated as a source of sodium for addition to large volume intravenous fluids to prevent or correct hyponatremia in patients with restricted or no oral intake. It is also useful as an additive for preparing specific intravenous fluid formulas when the needs of the patient cannot be met by standard electrolyte or nutrient solutions.</IndicationAndUsage>
<Description>Sodium acetate injection, USP (2 mEq/mL) is a sterile, clear, colorless, nonpyrogenic, concentrated solution of sodium acetate in water for injection. The solution is administered after dilution by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each mL contains 164 mg of sodium acetate, USP (anhydrous) which provides 2 mEq each of sodium (Na+) and acetate (CH3COO-). The solution contains no bacteriostat, antimicrobial agent or added buffer. May contain acetic acid for pH adjustment; the pH is 6.5 (6.0 to 7.0). The osmolar concentration is 4 mOsmol/mL (calc.); specific gravity 1.081. The solution is intended as an alternative to sodium chloride to provide sodium ion (Na+) for addition to large volume infusion fluids for intravenous use. Sodium acetate, USP, anhydrous is chemically designated CH3COONa, a hygroscopic powder freely soluble in water. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture program and are restricted to the preparation of admixtures for intravenous infusion.</Description>
</NDC>
<NDC>
<NDCCode>80830-2466-2</NDCCode>
<PackageDescription>10 BOTTLE, PLASTIC in 1 CARTON (80830-2466-2) / 50 mL in 1 BOTTLE, PLASTIC (80830-2466-1) </PackageDescription>
<NDC11Code>80830-2466-02</NDC11Code>
<ProductNDC>80830-2466</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iohexol</ProprietaryName>
<NonProprietaryName>Iohexol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRA-ARTICULAR; INTRATHECAL; INTRAVASCULAR; INTRAVENOUS; ORAL; RECTAL</RouteName>
<StartMarketingDate>20260625</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217737</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>IOHEXOL</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260625</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iohexol is a radiographic contrast agent indicated for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular and body cavity imaging procedures in adults and pediatric patients. (1).</IndicationAndUsage>
<Description>Iohexol, USP is a nonionic radiographic contrast agent available as: 1 Iohexol injection for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular and body cavity use.</Description>
</NDC>
<NDC>
<NDCCode>80830-2467-2</NDCCode>
<PackageDescription>10 BOTTLE, PLASTIC in 1 CARTON (80830-2467-2) / 75 mL in 1 BOTTLE, PLASTIC (80830-2467-1) </PackageDescription>
<NDC11Code>80830-2467-02</NDC11Code>
<ProductNDC>80830-2467</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iohexol</ProprietaryName>
<NonProprietaryName>Iohexol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRA-ARTICULAR; INTRATHECAL; INTRAVASCULAR; INTRAVENOUS; ORAL; RECTAL</RouteName>
<StartMarketingDate>20251113</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217737</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>IOHEXOL</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251113</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iohexol is a radiographic contrast agent indicated for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular and body cavity imaging procedures in adults and pediatric patients. (1).</IndicationAndUsage>
<Description>Iohexol, USP is a nonionic radiographic contrast agent available as: 1 Iohexol injection for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular and body cavity use.</Description>
</NDC>
<NDC>
<NDCCode>80830-2468-2</NDCCode>
<PackageDescription>10 BOTTLE, PLASTIC in 1 CARTON (80830-2468-2) / 100 mL in 1 BOTTLE, PLASTIC (80830-2468-1) </PackageDescription>
<NDC11Code>80830-2468-02</NDC11Code>
<ProductNDC>80830-2468</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iohexol</ProprietaryName>
<NonProprietaryName>Iohexol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRA-ARTICULAR; INTRATHECAL; INTRAVASCULAR; INTRAVENOUS; ORAL; RECTAL</RouteName>
<StartMarketingDate>20251113</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217737</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>IOHEXOL</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251113</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iohexol is a radiographic contrast agent indicated for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular and body cavity imaging procedures in adults and pediatric patients. (1).</IndicationAndUsage>
<Description>Iohexol, USP is a nonionic radiographic contrast agent available as: 1 Iohexol injection for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular and body cavity use.</Description>
</NDC>
<NDC>
<NDCCode>80830-2471-2</NDCCode>
<PackageDescription>10 BOTTLE, PLASTIC in 1 CARTON (80830-2471-2) / 50 mL in 1 BOTTLE, PLASTIC (80830-2471-1) </PackageDescription>
<NDC11Code>80830-2471-02</NDC11Code>
<ProductNDC>80830-2471</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iohexol</ProprietaryName>
<NonProprietaryName>Iohexol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRA-ARTICULAR; INTRATHECAL; INTRAVASCULAR; INTRAVENOUS; ORAL; RECTAL</RouteName>
<StartMarketingDate>20260625</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217737</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>IOHEXOL</SubstanceName>
<StrengthNumber>350</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260625</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iohexol is a radiographic contrast agent indicated for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular and body cavity imaging procedures in adults and pediatric patients. (1).</IndicationAndUsage>
<Description>Iohexol, USP is a nonionic radiographic contrast agent available as: 1 Iohexol injection for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular and body cavity use.</Description>
</NDC>
<NDC>
<NDCCode>80830-2472-2</NDCCode>
<PackageDescription>10 BOTTLE, PLASTIC in 1 CARTON (80830-2472-2) / 75 mL in 1 BOTTLE, PLASTIC (80830-2472-1) </PackageDescription>
<NDC11Code>80830-2472-02</NDC11Code>
<ProductNDC>80830-2472</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iohexol</ProprietaryName>
<NonProprietaryName>Iohexol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRA-ARTICULAR; INTRATHECAL; INTRAVASCULAR; INTRAVENOUS; ORAL; RECTAL</RouteName>
<StartMarketingDate>20260625</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217737</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>IOHEXOL</SubstanceName>
<StrengthNumber>350</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260625</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iohexol is a radiographic contrast agent indicated for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular and body cavity imaging procedures in adults and pediatric patients. (1).</IndicationAndUsage>
<Description>Iohexol, USP is a nonionic radiographic contrast agent available as: 1 Iohexol injection for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular and body cavity use.</Description>
</NDC>
<NDC>
<NDCCode>80830-2473-2</NDCCode>
<PackageDescription>10 BOTTLE, PLASTIC in 1 CARTON (80830-2473-2) / 100 mL in 1 BOTTLE, PLASTIC (80830-2473-1) </PackageDescription>
<NDC11Code>80830-2473-02</NDC11Code>
<ProductNDC>80830-2473</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iohexol</ProprietaryName>
<NonProprietaryName>Iohexol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRA-ARTICULAR; INTRATHECAL; INTRAVASCULAR; INTRAVENOUS; ORAL; RECTAL</RouteName>
<StartMarketingDate>20260625</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217737</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>IOHEXOL</SubstanceName>
<StrengthNumber>350</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260625</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iohexol is a radiographic contrast agent indicated for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular and body cavity imaging procedures in adults and pediatric patients. (1).</IndicationAndUsage>
<Description>Iohexol, USP is a nonionic radiographic contrast agent available as: 1 Iohexol injection for intrathecal, intra-arterial, intravenous, oral, rectal, intraarticular and body cavity use.</Description>
</NDC>
<NDC>
<NDCCode>80830-2613-2</NDCCode>
<PackageDescription>6 POUCH in 1 CARTON (80830-2613-2) / 1 BAG in 1 POUCH (80830-2613-1) / 1000 mL in 1 BAG</PackageDescription>
<NDC11Code>80830-2613-02</NDC11Code>
<ProductNDC>80830-2613</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Bicarbonate</ProprietaryName>
<NonProprietaryName>Sodium Bicarbonate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260713</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA220790</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>SODIUM BICARBONATE</SubstanceName>
<StrengthNumber>12.6</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Alkalinizing Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260713</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sodium bicarbonate injection is an alkalinizing agent indicated: 1 to raise plasma pH in adults and pediatric patients with clinically significant metabolic acidosis. (1.1) , 2 to alkalinize the urine in drug poisoning in adult and pediatric patients in cases in which urinary drug elimination is enhanced by urinary alkalinaztion. (1.2).</IndicationAndUsage>
<Description>Sodium bicarbonate injection, USP is an alkalinizing agent, supplied as a sterile, nonpyrogenic, clear, colorless, ready-to-use solution of sodium bicarbonate (NaHCO3) in water for injection for administration by the intravenous infusion as an electrolyte replenisher and systemic alkalizer. Sodium bicarbonate, 12.6 mg is equal to 0.15 milliequivalent each of Na+ and HCO3-. Sodium bicarbonate, USP is chemically designated NaHCO3, molecular weight 84.01 g/mol, a white crystalline powder soluble in water and insoluble in ethanol. Solution is offered in concentration of 1.26% [see How Supplied Storage and Handling (16.1)]. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only for use as an intravenous infusion. Carbon dioxide is added to adjust pH between 7 to 8.5. When smaller doses are required, the unused portion should be discarded.</Description>
</NDC>
<NDC>
<NDCCode>0591-2436-15</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (0591-2436-15) / 10 CAPSULE in 1 BLISTER PACK (0591-2436-45) </PackageDescription>
<NDC11Code>00591-2436-15</NDC11Code>
<ProductNDC>0591-2436</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isotretinoin</ProprietaryName>
<NonProprietaryName>Isotretinoin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210429</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205063</ApplicationNumber>
<LabelerName>Actavis Pharma, Inc.</LabelerName>
<SubstanceName>ISOTRETINOIN</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210429</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Isotretinoin capsules are indicated for the treatment of severe recalcitrant nodular acne in non-pregnant patients 12 years of age and older with multiple inflammatory nodules with a diameter of 5 mm or greater. Because of significant adverse reactions associated with its use, isotretinoin capsules are reserved for patients with severe nodular acne who are unresponsive to conventional therapy, including systemic antibiotics. Limitations of Use. If a second course of isotretinoin capsules treatment is needed, it is not recommended before a 2-month waiting period because the patient’s acne may continue to improve following a 15 to 20-week course of treatment [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Isotretinoin capsules, USP contain 10 mg, 20 mg, 25 mg, 30 mg, 35 mg or 40 mg of isotretinoin, USP (a retinoid) in hard gelatin capsules for oral administration. In addition to the active ingredient, isotretinoin USP, each capsule contains the following inactive ingredients: sorbitan monooleate, soybean oil, stearoyl polyoxyglycerides, and vitamin E. The capsule shells contain the following: 1 10 mg - FD&C Blue No. 1, gelatin, and titanium dioxide, 2 20 mg - FD&C Blue No. 1, gelatin, iron oxide yellow, and titanium dioxide, 3 25 mg - D&C Yellow No. 10, FD&C Blue No. 1, FD&C Green No. 3, gelatin, and titanium dioxide, 4 30 mg - FD&C Blue No. 1, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate, and titanium dioxide, 5 35 mg - FD&C Blue No. 1, FD&C Red No. 40, gelatin, and titanium dioxide, 6 40 mg - FD&C Blue No. 1, FD&C Yellow No. 6, gelatin, sodium lauryl sulfate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>22840-2436-4</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-2436-4) </PackageDescription>
<NDC11Code>22840-2436-04</NDC11Code>
<ProductNDC>22840-2436</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Western Juniper Pollen</ProprietaryName>
<NonProprietaryName>Juniperus Occidentalis</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>JUNIPERUS OCCIDENTALIS POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.</IndicationAndUsage>
<Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
</NDC>
<NDC>
<NDCCode>29500-2436-1</NDCCode>
<PackageDescription>9.4 g in 1 TUBE (29500-2436-1)</PackageDescription>
<NDC11Code>29500-2436-01</NDC11Code>
<ProductNDC>29500-2436</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Triple Antibiotic</ProprietaryName>
<ProprietaryNameSuffix>Extra Strength</ProprietaryNameSuffix>
<NonProprietaryName>Bacitracin Zinc, Neomycin Sulfate, Polymyxin B Sulfate</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20130710</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part333B</ApplicationNumber>
<LabelerName>Personal Care Products, Inc.</LabelerName>
<SubstanceName>BACITRACIN ZINC; NEOMYCIN SULFATE; POLYMYXIN B SULFATE</SubstanceName>
<StrengthNumber>400; 3.5; 5000</StrengthNumber>
<StrengthUnit>[iU]/9.4g; mg/9.4g; [iU]/9.4g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>First aid to help prevent infection in minor: 1 cuts, 2 scrapes, 3 burns.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>53002-2436-3</NDCCode>
<PackageDescription>1 INHALER in 1 CARTON (53002-2436-3) / 1 AEROSOL, METERED in 1 INHALER</PackageDescription>
<NDC11Code>53002-2436-03</NDC11Code>
<ProductNDC>53002-2436</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Qvar Redihaler</ProprietaryName>
<NonProprietaryName>Beclomethasone Dipropionate Hfa</NonProprietaryName>
<DosageFormName>AEROSOL, METERED</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20180215</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA207921</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>BECLOMETHASONE DIPROPIONATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>QVAR REDIHALER is indicated in the maintenance treatment of asthma as prophylactic therapy in adults and pediatric patients 4 years of age and older. Limitations of Use. QVAR REDIHALER is not indicated for the relief of acute bronchospasm.</IndicationAndUsage>
<Description>The active component of QVAR REDIHALER 40 mcg Inhalation Aerosol and QVAR REDIHALER 80 mcg Inhalation Aerosol is beclomethasone dipropionate, USP, a corticosteroid having the chemical name 9-chloro-11ß,17,21-trihydroxy-16ß-methylpregna-1,4-diene-3,20-dione 17,21-dipropionate. Beclomethasone dipropionate is a diester of beclomethasone, a synthetic corticosteroid chemically related to dexamethasone. Beclomethasone differs from dexamethasone in having a chlorine at the 9‑alpha carbon in place of a fluorine, and in having a 16‑beta-methyl group instead of a 16‑alpha-methyl group. Beclomethasone dipropionate is a white to creamy white, odorless powder with a molecular formula of C28H37ClO7 and a molecular weight of 521.1. Its chemical structure is. QVAR REDIHALER is a pressurized, breath‑actuated, metered‑dose aerosol with a dose counter intended for oral inhalation only. Each unit consists of a sealed breath‑actuated inhaler device enclosing a canister containing a solution of beclomethasone dipropionate in propellant HFA‑134a (1,1,1,2 tetrafluoroethane) and ethanol (0.85 g). QVAR REDIHALER 40 mcg delivers 40 mcg of beclomethasone dipropionate from the actuator mouthpiece and 50 mcg from the canister valve. QVAR REDIHALER 80 mcg delivers 80 mcg of beclomethasone dipropionate from the actuator mouthpiece and 100 mcg from the canister valve. Both products deliver 50 microliters (59 milligrams) of solution formulation as an aerosol from the canister valve with each actuation. The 40‑mcg canisters and the 80‑mcg canisters provide 120 inhalations each. Since the QVAR REDIHALER canister is fitted with a primeless valve, no priming actuations are required before use. For both products, an actuation was always triggered by a 20 L/min inspiratory flow rate.</Description>
</NDC>
</NDCList>