{
"NDC": [
{
"NDCCode": "81298-5781-5",
"PackageDescription": "25 VIAL, SINGLE-USE in 1 CARTON (81298-5781-5) / 1 mL in 1 VIAL, SINGLE-USE (81298-5781-1) ",
"NDC11Code": "81298-5781-05",
"ProductNDC": "81298-5781",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Triamcinolone Acetonide",
"NonProprietaryName": "Triamcinolone Acetonide",
"DosageFormName": "SUSPENSION",
"RouteName": "INTRA-ARTERIAL; INTRAMUSCULAR",
"StartMarketingDate": "20220502",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213543",
"LabelerName": "Long Grove Pharmaceuticals, LLC",
"SubstanceName": "TRIAMCINOLONE ACETONIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220502",
"SamplePackage": "N",
"IndicationAndUsage": "Where oral therapy is not feasible, injectable corticosteroid therapy, including triamcinolone acetonide injectable suspension, USP is indicated for intramuscular use as follows:. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, perennial or seasonal allergic rhinitis, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, Diamond-Blackfan anemia, pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous system: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, temporal arteritis, uveitis, and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, polymyositis, and systemic lupus erythematosus.",
"Description": "Triamcinolone acetonide injectable suspension, USP is a synthetic glucocorticoid corticosteroid with anti-inflammatory action. THIS FORMULATION IS SUITABLE FOR INTRAMUSCULAR AND INTRA-ARTICULAR USE ONLY. THIS FORMULATION IS NOT FOR INTRADERMAL INJECTION. Each mL of the sterile aqueous suspension provides 40 mg triamcinolone acetonide, with 0.66% sodium chloride for isotonicity, 0.99% (w/v) benzyl alcohol as a preservative, 0.63% carboxymethylcellulose sodium, and 0.04% polysorbate 80. Sodium hydroxide or hydrochloric acid may be present to adjust pH to 5.0 to 7.5. At the time of manufacture, the air in the container is replaced by nitrogen. The chemical name for triamcinolone acetonide is 9-Fluoro-11β, 16α,17,21-tetrahydroxypregna-1,4-diene- 3,20-dione cyclic 16,17-acetal with acetone. Its structural formula is:. MW 434.50. Triamcinolone acetonide occurs as a white to cream-colored, crystalline powder having not more than a slight odor and is practically insoluble in water and very soluble in alcohol."
},
{
"NDCCode": "22840-5781-5",
"PackageDescription": "5 mL in 1 BOTTLE, DROPPER (22840-5781-5) ",
"NDC11Code": "22840-5781-05",
"ProductNDC": "22840-5781",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Almond Food",
"NonProprietaryName": "Prunus Dulcis",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "ALMOND",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Dietary Proteins [CS], Increased Histamine Release [PE], Non-Standardized Food Allergenic Extract [EPC], Nut Proteins [EXT]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Non-Standardized Allergenic Extracts are indicated for: 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies. .",
"Description": "Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter."
},
{
"NDCCode": "81298-5010-5",
"PackageDescription": "1 CARTON in 1 BOX (81298-5010-5) > 1 VIAL, SINGLE-DOSE in 1 CARTON (81298-5010-1) > 1 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "81298-5010-05",
"ProductNDC": "81298-5010",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carboprost Tromethamine",
"NonProprietaryName": "Carboprost Tromethamine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20221015",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214499",
"LabelerName": "Long Grove Pharmaceuticals, LLC",
"SubstanceName": "CARBOPROST TROMETHAMINE",
"StrengthNumber": "250",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Prostaglandin Analog [EPC], Prostaglandins [CS]",
"Status": "Active",
"LastUpdate": "2022-12-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20221212",
"SamplePackage": "N",
"IndicationAndUsage": "Carboprost tromethamine injection is indicated for aborting pregnancy between the 13th and 20th weeks of gestation as calculated from the first day of the last normal menstrual period and in the following conditions related to second trimester abortion: : 1 Failure of expulsion of the fetus during the course of treatment by another method; , 2 Premature rupture of membranes in intrauterine methods with loss of drug and insufficient or absent uterine activity; , 3 Requirement of a repeat intrauterine instillation of drug for expulsion of the fetus; , 4 Inadvertent or spontaneous rupture of membranes in the presence of a previable fetus and absence of adequate activity for expulsion. .",
"Description": "Carboprost tromethamine injection, USP, an oxytocic, contains the tromethamine salt of the (15S)-15 methyl analogue of naturally occurring prostaglandin F2α in a solution suitable for intramuscular injection. Carboprost tromethamine is the established name for the active ingredient in carboprost tromethamine injection, USP. Four other chemical names are: : 1 (15S)-15-methyl prostaglandin F2α tromethamine salt , 2 7-(3α,5α-dihydroxy-2β-[(3S)-3-hydroxy-3-methyl-trans-1-octenyl]-1α cyclopentyl]-cis-5-heptenoic acid compound with 2-amino-2-(hydroxymethyl)- 1,3-propanediol , 3 (15S)-9α,11α,15-trihydroxy-15-methylprosta-cis-5, trans-13-dienoic acid tromethamine salt , 4 (15S)-15-methyl PGF2α-THAM ."
},
{
"NDCCode": "81298-5785-3",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (81298-5785-3) / 5 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "81298-5785-03",
"ProductNDC": "81298-5785",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Triamcinolone Acetonide",
"NonProprietaryName": "Triamcinolone Acetonide",
"DosageFormName": "SUSPENSION",
"RouteName": "INTRA-ARTERIAL; INTRAMUSCULAR",
"StartMarketingDate": "20220502",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213543",
"LabelerName": "Long Grove Pharmaceuticals, LLC",
"SubstanceName": "TRIAMCINOLONE ACETONIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220502",
"SamplePackage": "N",
"IndicationAndUsage": "Where oral therapy is not feasible, injectable corticosteroid therapy, including triamcinolone acetonide injectable suspension, USP is indicated for intramuscular use as follows:. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, perennial or seasonal allergic rhinitis, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, Diamond-Blackfan anemia, pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous system: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, temporal arteritis, uveitis, and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, polymyositis, and systemic lupus erythematosus.",
"Description": "Triamcinolone acetonide injectable suspension, USP is a synthetic glucocorticoid corticosteroid with anti-inflammatory action. THIS FORMULATION IS SUITABLE FOR INTRAMUSCULAR AND INTRA-ARTICULAR USE ONLY. THIS FORMULATION IS NOT FOR INTRADERMAL INJECTION. Each mL of the sterile aqueous suspension provides 40 mg triamcinolone acetonide, with 0.66% sodium chloride for isotonicity, 0.99% (w/v) benzyl alcohol as a preservative, 0.63% carboxymethylcellulose sodium, and 0.04% polysorbate 80. Sodium hydroxide or hydrochloric acid may be present to adjust pH to 5.0 to 7.5. At the time of manufacture, the air in the container is replaced by nitrogen. The chemical name for triamcinolone acetonide is 9-Fluoro-11β, 16α,17,21-tetrahydroxypregna-1,4-diene- 3,20-dione cyclic 16,17-acetal with acetone. Its structural formula is:. MW 434.50. Triamcinolone acetonide occurs as a white to cream-colored, crystalline powder having not more than a slight odor and is practically insoluble in water and very soluble in alcohol."
},
{
"NDCCode": "81298-8660-3",
"PackageDescription": "12 VIAL, GLASS in 1 CARTON (81298-8660-3) / 5 mL in 1 VIAL, GLASS (81298-8660-1) ",
"NDC11Code": "81298-8660-03",
"ProductNDC": "81298-8660",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ak-fluor",
"NonProprietaryName": "Fluorescein",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240928",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022186",
"LabelerName": "Long Grove Pharmaceuticals, LLC",
"SubstanceName": "FLUORESCEIN SODIUM",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Diagnostic Dye [EPC], Dyes [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240928",
"SamplePackage": "N",
"IndicationAndUsage": "AK-FLUOR® 10% (100 mg/mL) is indicated in diagnostic fluorescein angiography or angioscopy of the retina and iris vasculature.",
"Description": "AK-FLUOR (fluorescein injection) contains fluorescein sodium, a diagnostic aid, in a sterile solution for use intravenously. It is a dark reddish orange clear solution with a pH of 8.3 to 9.8 and an osmolality of 572 to 858 mOsm/kg. Its chemical name is spiro[isobenzofuran-1 (3H),9'-[9H]xanthene]-3-one,3'6'- dihydroxy, disodium salt. Its molecular weight is 376.27. The active ingredient is represented by the chemical structure:. AK-FLUOR (500 mg/5 mL) (100 mg/mL) 10% contains: : 1 Active ingredient: fluorescein sodium (10 % w/v, 100 mg/mL), equivalent to 88.3 mg/ml of fluorescein , 2 Inactive ingredients: sodium hydroxide and/or hydrochloric acid may be used to adjust pH (8.3 to 9.8), and Water for Injection. ."
},
{
"NDCCode": "0904-5781-09",
"PackageDescription": "237 mL in 1 BOTTLE, PLASTIC (0904-5781-09)",
"NDC11Code": "00904-5781-09",
"ProductNDC": "0904-5781",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Dibromm",
"ProprietaryNameSuffix": "With Pe",
"NonProprietaryName": "Brompheniramine Maleate, Phenylephrine Hydrochloride",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20090107",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "Major Pharmaceuticals",
"SubstanceName": "BROMPHENIRAMINE MALEATE; PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "1; 2.5",
"StrengthUnit": "mg/5mL; mg/5mL",
"Status": "Deprecated",
"LastUpdate": "2018-07-25",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "0904-5781-20",
"PackageDescription": "118 mL in 1 BOTTLE (0904-5781-20) ",
"NDC11Code": "00904-5781-20",
"ProductNDC": "0904-5781",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Dibromm",
"ProprietaryNameSuffix": "With Pe",
"NonProprietaryName": "Brompheniramine Maleate, Phenylephrine Hydrochloride",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20090107",
"EndMarketingDate": "20180930",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "Major Pharmaceuticals",
"SubstanceName": "BROMPHENIRAMINE MALEATE; PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "1; 2.5",
"StrengthUnit": "mg/5mL; mg/5mL",
"Status": "Deprecated",
"LastUpdate": "2018-10-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20090107",
"EndMarketingDatePackage": "20180930",
"SamplePackage": "N"
},
{
"NDCCode": "50090-5781-0",
"PackageDescription": "30 TABLET in 1 BOTTLE (50090-5781-0) ",
"NDC11Code": "50090-5781-00",
"ProductNDC": "50090-5781",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clopidogrel",
"NonProprietaryName": "Clopidogrel",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20121016",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202928",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "CLOPIDOGREL BISULFATE",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C8 Inhibitors [MoA], Decreased Platelet Aggregation [PE], P2Y12 Platelet Inhibitor [EPC], P2Y12 Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2024-11-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20211008",
"SamplePackage": "N",
"IndicationAndUsage": "Clopidogrel is a P2Y12 platelet inhibitor indicated for: Acute coronary syndrome -For patients with non-ST-segment elevation ACS (unstable angina [UA]/non-ST-elevation myocardial infarction [NSTEMI]), clopidogrel has been shown to reduce the rate of myocardial infarction (MI) and stroke. (1.1) - For patients with ST-elevation myocardial infarction (STEMI), clopidogrel has been shown to reduce the rate of MI and stroke. (1.1) Recent MI, recent stroke, or established peripheral arterial disease. Clopidogrel has been shown to reduce the rate of MI and stroke. (1.2).",
"Description": "Clopidogrel tablets, USP is a thienopyridine class inhibitor of P2Y12 ADP platelet receptors. Chemically it is methyl (+)-(S)-α-(2-chlorophenyl)-6,7-dihydrothieno[3,2-c]pyridine-5(4H)-acetate sulfate (1:1). The empirical formula of clopidogrel bisulfate is C16H16ClNO2SH2SO4 and its molecular weight is 419.9. The structural formula is as follows:. Clopidogrel bisulfate, USP are a white to off-white powder. It is practically insoluble in water at neutral pH but freely soluble at pH 1. It also dissolves freely in methanol, dissolves sparingly in methylene chloride, and is practically insoluble in ethyl ether. It has a specific optical rotation of about +56°. Clopidogrel tablets USP, 75 mg for oral administration is provided as pink, circular, biconvex, debossed, film-coated tablets containing 97.875 mg of clopidogrel bisulfate which is the molar equivalent of 75 mg of clopidogrel base. Each tablet contains lactose monohydrate, low substituted hydroxypropyl cellulose, colloidal silicon dioxide, dimethicone and hydrogenated castor oil as inactive ingredients. The pink film coating contains hypromellose 2910, polyethylene glycol 400, titanium dioxide and iron oxide red."
},
{
"NDCCode": "50090-5781-1",
"PackageDescription": "90 TABLET in 1 BOTTLE (50090-5781-1) ",
"NDC11Code": "50090-5781-01",
"ProductNDC": "50090-5781",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clopidogrel",
"NonProprietaryName": "Clopidogrel",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20121016",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202928",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "CLOPIDOGREL BISULFATE",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C8 Inhibitors [MoA], Decreased Platelet Aggregation [PE], P2Y12 Platelet Inhibitor [EPC], P2Y12 Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2024-11-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20211008",
"SamplePackage": "N",
"IndicationAndUsage": "Clopidogrel is a P2Y12 platelet inhibitor indicated for: Acute coronary syndrome -For patients with non-ST-segment elevation ACS (unstable angina [UA]/non-ST-elevation myocardial infarction [NSTEMI]), clopidogrel has been shown to reduce the rate of myocardial infarction (MI) and stroke. (1.1) - For patients with ST-elevation myocardial infarction (STEMI), clopidogrel has been shown to reduce the rate of MI and stroke. (1.1) Recent MI, recent stroke, or established peripheral arterial disease. Clopidogrel has been shown to reduce the rate of MI and stroke. (1.2).",
"Description": "Clopidogrel tablets, USP is a thienopyridine class inhibitor of P2Y12 ADP platelet receptors. Chemically it is methyl (+)-(S)-α-(2-chlorophenyl)-6,7-dihydrothieno[3,2-c]pyridine-5(4H)-acetate sulfate (1:1). The empirical formula of clopidogrel bisulfate is C16H16ClNO2SH2SO4 and its molecular weight is 419.9. The structural formula is as follows:. Clopidogrel bisulfate, USP are a white to off-white powder. It is practically insoluble in water at neutral pH but freely soluble at pH 1. It also dissolves freely in methanol, dissolves sparingly in methylene chloride, and is practically insoluble in ethyl ether. It has a specific optical rotation of about +56°. Clopidogrel tablets USP, 75 mg for oral administration is provided as pink, circular, biconvex, debossed, film-coated tablets containing 97.875 mg of clopidogrel bisulfate which is the molar equivalent of 75 mg of clopidogrel base. Each tablet contains lactose monohydrate, low substituted hydroxypropyl cellulose, colloidal silicon dioxide, dimethicone and hydrogenated castor oil as inactive ingredients. The pink film coating contains hypromellose 2910, polyethylene glycol 400, titanium dioxide and iron oxide red."
},
{
"NDCCode": "54868-5781-0",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (54868-5781-0)",
"NDC11Code": "54868-5781-00",
"ProductNDC": "54868-5781",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine Besylate And Benazepril Hydrochloride",
"NonProprietaryName": "Amlodipine Besylate And Benazepril Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20071026",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078466",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "AMLODIPINE BESYLATE; BENAZEPRIL HYDROCHLORIDE",
"StrengthNumber": "10; 20",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA],Dihydropyridine Calcium Channel Blocker [EPC],Dihydropyridines [Chemical/Ingredient],Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA],Decreased Blood Pressure [PE]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Amlodipine besylate and benazepril hydrochloride capsule is a combination tablet of amlodipine, a dihydropyridine calcium channel blocker (DHP CCB) and benazepril, an angiotensin converting enzyme (ACE) inhibitor. Amlodipine besylate and benazepril hydrochloride is indicated for the treatment of hypertension (1) in patients not adequately controlled on monotherapy with either agent.",
"Description": "Amlodipine besylate and benazepril hydrochloride capsule is a combination of amlodipine besylate and benazepril hydrochloride. Benazepril hydrochloride is a white to off-white crystalline powder, soluble (>100 mg/mL) in water, in ethanol, and in methanol. Benazepril hydrochloride’s chemical name is 3-[[1-(ethoxycarbonyl)-3-phenyl-(1S)-propyl]amino]-2,3,4,5-tetrahydro-2-oxo-1H-1-(3S)-benzazepine-1-acetic acid monohydrochloride; its structural formula is. Its empirical formula is C24H28N2O5. HCl, and its molecular weight is 460.96. Benazeprilat, the active metabolite of benazepril, is a nonsulfhydryl angiotensin-converting enzyme (ACE) inhibitor. Benazepril is converted to benazeprilat by hepatic cleavage of the ester group. Amlodipine besylate is a white to pale yellow crystalline powder, slightly soluble in water and sparingly soluble in ethanol. Its chemical name is (R,S)3-ethyl-5-methyl-2-(2-aminoethoxymethyl)-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate benzenesulfonate; its structural formula is. Its empirical formula is C20H25ClN2O5.C6H6O3S, and its molecular weight is 567.1. Amlodipine besylate is the besylate salt of amlodipine, a dihydropyridine calcium channel blocker. Amlodipine besylate and benazepril hydrochloride capsules are formulated in six different strengths for oral administration with a combination of amlodipine besylate equivalent to 2.5 mg, 5 mg or 10 mg of amlodipine, with 10 mg, 20 mg or 40 mg of benazepril hydrochloride providing for the following available combinations: 2.5 mg/10 mg, 5 mg/10 mg, 5 mg/20 mg, 5 mg/40 mg, 10 mg/20 mg and 10 mg/40 mg. The inactive ingredients of the capsules are crospovidone, hydrophobic fumed silica, lactose anhydrous, magnesium stearate, microcrystalline cellulose, povidone, gelatin, titanium dioxide (not present in 10 mg/20 mg strength), black iron oxide, red iron oxide (present in 5 mg/10 mg, 5 mg/20 mg and 10 mg/ 20 mg strength), yellow iron oxide, (present in 5 mg/10 mg strength), D&C Yellow #10 (present in 5 mg/40 mg strength), FD&C Blue #1 (present in 10 mg/40 mg strength), FD&C Blue #2 (present in 10 mg/20 mg strength), FD&C Green #3 (present in 5 mg/40 mg strength),FD&C Red #40 (present in 10 mg/40 mg strength), FD&C Yellow #6 (present in 5 mg/ 40 mg strength), shellac, propylene glycol, potassium hydroxide."
},
{
"NDCCode": "54868-5781-1",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (54868-5781-1)",
"NDC11Code": "54868-5781-01",
"ProductNDC": "54868-5781",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine Besylate And Benazepril Hydrochloride",
"NonProprietaryName": "Amlodipine Besylate And Benazepril Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20071026",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078466",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "AMLODIPINE BESYLATE; BENAZEPRIL HYDROCHLORIDE",
"StrengthNumber": "10; 20",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA],Dihydropyridine Calcium Channel Blocker [EPC],Dihydropyridines [Chemical/Ingredient],Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA],Decreased Blood Pressure [PE]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Amlodipine besylate and benazepril hydrochloride capsule is a combination tablet of amlodipine, a dihydropyridine calcium channel blocker (DHP CCB) and benazepril, an angiotensin converting enzyme (ACE) inhibitor. Amlodipine besylate and benazepril hydrochloride is indicated for the treatment of hypertension (1) in patients not adequately controlled on monotherapy with either agent.",
"Description": "Amlodipine besylate and benazepril hydrochloride capsule is a combination of amlodipine besylate and benazepril hydrochloride. Benazepril hydrochloride is a white to off-white crystalline powder, soluble (>100 mg/mL) in water, in ethanol, and in methanol. Benazepril hydrochloride’s chemical name is 3-[[1-(ethoxycarbonyl)-3-phenyl-(1S)-propyl]amino]-2,3,4,5-tetrahydro-2-oxo-1H-1-(3S)-benzazepine-1-acetic acid monohydrochloride; its structural formula is. Its empirical formula is C24H28N2O5. HCl, and its molecular weight is 460.96. Benazeprilat, the active metabolite of benazepril, is a nonsulfhydryl angiotensin-converting enzyme (ACE) inhibitor. Benazepril is converted to benazeprilat by hepatic cleavage of the ester group. Amlodipine besylate is a white to pale yellow crystalline powder, slightly soluble in water and sparingly soluble in ethanol. Its chemical name is (R,S)3-ethyl-5-methyl-2-(2-aminoethoxymethyl)-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate benzenesulfonate; its structural formula is. Its empirical formula is C20H25ClN2O5.C6H6O3S, and its molecular weight is 567.1. Amlodipine besylate is the besylate salt of amlodipine, a dihydropyridine calcium channel blocker. Amlodipine besylate and benazepril hydrochloride capsules are formulated in six different strengths for oral administration with a combination of amlodipine besylate equivalent to 2.5 mg, 5 mg or 10 mg of amlodipine, with 10 mg, 20 mg or 40 mg of benazepril hydrochloride providing for the following available combinations: 2.5 mg/10 mg, 5 mg/10 mg, 5 mg/20 mg, 5 mg/40 mg, 10 mg/20 mg and 10 mg/40 mg. The inactive ingredients of the capsules are crospovidone, hydrophobic fumed silica, lactose anhydrous, magnesium stearate, microcrystalline cellulose, povidone, gelatin, titanium dioxide (not present in 10 mg/20 mg strength), black iron oxide, red iron oxide (present in 5 mg/10 mg, 5 mg/20 mg and 10 mg/ 20 mg strength), yellow iron oxide, (present in 5 mg/10 mg strength), D&C Yellow #10 (present in 5 mg/40 mg strength), FD&C Blue #1 (present in 10 mg/40 mg strength), FD&C Blue #2 (present in 10 mg/20 mg strength), FD&C Green #3 (present in 5 mg/40 mg strength),FD&C Red #40 (present in 10 mg/40 mg strength), FD&C Yellow #6 (present in 5 mg/ 40 mg strength), shellac, propylene glycol, potassium hydroxide."
},
{
"NDCCode": "54868-5781-2",
"PackageDescription": "10 CAPSULE in 1 BOTTLE (54868-5781-2)",
"NDC11Code": "54868-5781-02",
"ProductNDC": "54868-5781",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine Besylate And Benazepril Hydrochloride",
"NonProprietaryName": "Amlodipine Besylate And Benazepril Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20071026",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078466",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "AMLODIPINE BESYLATE; BENAZEPRIL HYDROCHLORIDE",
"StrengthNumber": "10; 20",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA],Dihydropyridine Calcium Channel Blocker [EPC],Dihydropyridines [Chemical/Ingredient],Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA],Decreased Blood Pressure [PE]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Amlodipine besylate and benazepril hydrochloride capsule is a combination tablet of amlodipine, a dihydropyridine calcium channel blocker (DHP CCB) and benazepril, an angiotensin converting enzyme (ACE) inhibitor. Amlodipine besylate and benazepril hydrochloride is indicated for the treatment of hypertension (1) in patients not adequately controlled on monotherapy with either agent.",
"Description": "Amlodipine besylate and benazepril hydrochloride capsule is a combination of amlodipine besylate and benazepril hydrochloride. Benazepril hydrochloride is a white to off-white crystalline powder, soluble (>100 mg/mL) in water, in ethanol, and in methanol. Benazepril hydrochloride’s chemical name is 3-[[1-(ethoxycarbonyl)-3-phenyl-(1S)-propyl]amino]-2,3,4,5-tetrahydro-2-oxo-1H-1-(3S)-benzazepine-1-acetic acid monohydrochloride; its structural formula is. Its empirical formula is C24H28N2O5. HCl, and its molecular weight is 460.96. Benazeprilat, the active metabolite of benazepril, is a nonsulfhydryl angiotensin-converting enzyme (ACE) inhibitor. Benazepril is converted to benazeprilat by hepatic cleavage of the ester group. Amlodipine besylate is a white to pale yellow crystalline powder, slightly soluble in water and sparingly soluble in ethanol. Its chemical name is (R,S)3-ethyl-5-methyl-2-(2-aminoethoxymethyl)-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate benzenesulfonate; its structural formula is. Its empirical formula is C20H25ClN2O5.C6H6O3S, and its molecular weight is 567.1. Amlodipine besylate is the besylate salt of amlodipine, a dihydropyridine calcium channel blocker. Amlodipine besylate and benazepril hydrochloride capsules are formulated in six different strengths for oral administration with a combination of amlodipine besylate equivalent to 2.5 mg, 5 mg or 10 mg of amlodipine, with 10 mg, 20 mg or 40 mg of benazepril hydrochloride providing for the following available combinations: 2.5 mg/10 mg, 5 mg/10 mg, 5 mg/20 mg, 5 mg/40 mg, 10 mg/20 mg and 10 mg/40 mg. The inactive ingredients of the capsules are crospovidone, hydrophobic fumed silica, lactose anhydrous, magnesium stearate, microcrystalline cellulose, povidone, gelatin, titanium dioxide (not present in 10 mg/20 mg strength), black iron oxide, red iron oxide (present in 5 mg/10 mg, 5 mg/20 mg and 10 mg/ 20 mg strength), yellow iron oxide, (present in 5 mg/10 mg strength), D&C Yellow #10 (present in 5 mg/40 mg strength), FD&C Blue #1 (present in 10 mg/40 mg strength), FD&C Blue #2 (present in 10 mg/20 mg strength), FD&C Green #3 (present in 5 mg/40 mg strength),FD&C Red #40 (present in 10 mg/40 mg strength), FD&C Yellow #6 (present in 5 mg/ 40 mg strength), shellac, propylene glycol, potassium hydroxide."
},
{
"NDCCode": "54868-5781-3",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (54868-5781-3)",
"NDC11Code": "54868-5781-03",
"ProductNDC": "54868-5781",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine Besylate And Benazepril Hydrochloride",
"NonProprietaryName": "Amlodipine Besylate And Benazepril Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20071026",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078466",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "AMLODIPINE BESYLATE; BENAZEPRIL HYDROCHLORIDE",
"StrengthNumber": "10; 20",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA],Dihydropyridine Calcium Channel Blocker [EPC],Dihydropyridines [Chemical/Ingredient],Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA],Decreased Blood Pressure [PE]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Amlodipine besylate and benazepril hydrochloride capsule is a combination tablet of amlodipine, a dihydropyridine calcium channel blocker (DHP CCB) and benazepril, an angiotensin converting enzyme (ACE) inhibitor. Amlodipine besylate and benazepril hydrochloride is indicated for the treatment of hypertension (1) in patients not adequately controlled on monotherapy with either agent.",
"Description": "Amlodipine besylate and benazepril hydrochloride capsule is a combination of amlodipine besylate and benazepril hydrochloride. Benazepril hydrochloride is a white to off-white crystalline powder, soluble (>100 mg/mL) in water, in ethanol, and in methanol. Benazepril hydrochloride’s chemical name is 3-[[1-(ethoxycarbonyl)-3-phenyl-(1S)-propyl]amino]-2,3,4,5-tetrahydro-2-oxo-1H-1-(3S)-benzazepine-1-acetic acid monohydrochloride; its structural formula is. Its empirical formula is C24H28N2O5. HCl, and its molecular weight is 460.96. Benazeprilat, the active metabolite of benazepril, is a nonsulfhydryl angiotensin-converting enzyme (ACE) inhibitor. Benazepril is converted to benazeprilat by hepatic cleavage of the ester group. Amlodipine besylate is a white to pale yellow crystalline powder, slightly soluble in water and sparingly soluble in ethanol. Its chemical name is (R,S)3-ethyl-5-methyl-2-(2-aminoethoxymethyl)-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate benzenesulfonate; its structural formula is. Its empirical formula is C20H25ClN2O5.C6H6O3S, and its molecular weight is 567.1. Amlodipine besylate is the besylate salt of amlodipine, a dihydropyridine calcium channel blocker. Amlodipine besylate and benazepril hydrochloride capsules are formulated in six different strengths for oral administration with a combination of amlodipine besylate equivalent to 2.5 mg, 5 mg or 10 mg of amlodipine, with 10 mg, 20 mg or 40 mg of benazepril hydrochloride providing for the following available combinations: 2.5 mg/10 mg, 5 mg/10 mg, 5 mg/20 mg, 5 mg/40 mg, 10 mg/20 mg and 10 mg/40 mg. The inactive ingredients of the capsules are crospovidone, hydrophobic fumed silica, lactose anhydrous, magnesium stearate, microcrystalline cellulose, povidone, gelatin, titanium dioxide (not present in 10 mg/20 mg strength), black iron oxide, red iron oxide (present in 5 mg/10 mg, 5 mg/20 mg and 10 mg/ 20 mg strength), yellow iron oxide, (present in 5 mg/10 mg strength), D&C Yellow #10 (present in 5 mg/40 mg strength), FD&C Blue #1 (present in 10 mg/40 mg strength), FD&C Blue #2 (present in 10 mg/20 mg strength), FD&C Green #3 (present in 5 mg/40 mg strength),FD&C Red #40 (present in 10 mg/40 mg strength), FD&C Yellow #6 (present in 5 mg/ 40 mg strength), shellac, propylene glycol, potassium hydroxide."
},
{
"NDCCode": "0603-5781-10",
"PackageDescription": "10 TABLET in 1 BOTTLE, PLASTIC (0603-5781-10)",
"NDC11Code": "00603-5781-10",
"ProductNDC": "0603-5781",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sulfamethoxazole And Trimethoprim",
"NonProprietaryName": "Sulfamethoxazole And Trimethoprim",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070125",
"EndMarketingDate": "20180117",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078060",
"LabelerName": "Qualitest Pharmaceuticals",
"SubstanceName": "SULFAMETHOXAZOLE; TRIMETHOPRIM",
"StrengthNumber": "800; 160",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Sulfonamide Antimicrobial [EPC],Sulfonamides [Chemical/Ingredient],Cytochrome P450 2C9 Inhibitors [MoA],Dihydrofolate Reductase Inhibitor Antibacterial [EPC],Dihydrofolate Reductase Inhibitors [MoA],Cytochrome P450 2C8 Inhibitors [MoA],Organic Cation Transporter 2 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-01-17",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "0603-5781-21",
"PackageDescription": "100 TABLET in 1 BOTTLE, PLASTIC (0603-5781-21)",
"NDC11Code": "00603-5781-21",
"ProductNDC": "0603-5781",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sulfamethoxazole And Trimethoprim",
"NonProprietaryName": "Sulfamethoxazole And Trimethoprim",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070125",
"EndMarketingDate": "20180117",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078060",
"LabelerName": "Qualitest Pharmaceuticals",
"SubstanceName": "SULFAMETHOXAZOLE; TRIMETHOPRIM",
"StrengthNumber": "800; 160",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Sulfonamide Antimicrobial [EPC],Sulfonamides [Chemical/Ingredient],Cytochrome P450 2C9 Inhibitors [MoA],Dihydrofolate Reductase Inhibitor Antibacterial [EPC],Dihydrofolate Reductase Inhibitors [MoA],Cytochrome P450 2C8 Inhibitors [MoA],Organic Cation Transporter 2 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-01-17",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "0603-5781-28",
"PackageDescription": "500 TABLET in 1 BOTTLE, PLASTIC (0603-5781-28)",
"NDC11Code": "00603-5781-28",
"ProductNDC": "0603-5781",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sulfamethoxazole And Trimethoprim",
"NonProprietaryName": "Sulfamethoxazole And Trimethoprim",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070125",
"EndMarketingDate": "20180117",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078060",
"LabelerName": "Qualitest Pharmaceuticals",
"SubstanceName": "SULFAMETHOXAZOLE; TRIMETHOPRIM",
"StrengthNumber": "800; 160",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Sulfonamide Antimicrobial [EPC],Sulfonamides [Chemical/Ingredient],Cytochrome P450 2C9 Inhibitors [MoA],Dihydrofolate Reductase Inhibitor Antibacterial [EPC],Dihydrofolate Reductase Inhibitors [MoA],Cytochrome P450 2C8 Inhibitors [MoA],Organic Cation Transporter 2 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-01-17",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "22840-5781-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (22840-5781-2) ",
"NDC11Code": "22840-5781-02",
"ProductNDC": "22840-5781",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Almond Food",
"NonProprietaryName": "Prunus Dulcis",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "ALMOND",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Dietary Proteins [CS], Increased Histamine Release [PE], Non-Standardized Food Allergenic Extract [EPC], Nut Proteins [EXT]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Non-Standardized Allergenic Extracts are indicated for: 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies. .",
"Description": "Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter."
},
{
"NDCCode": "62670-5781-0",
"PackageDescription": "29 mL in 1 BOTTLE (62670-5781-0) ",
"NDC11Code": "62670-5781-00",
"ProductNDC": "62670-5781",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Anti-bacterial Hand",
"ProprietaryNameSuffix": "A Thousand Wishes",
"NonProprietaryName": "Alcohol",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20191209",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333E",
"LabelerName": "Bath & Body Works, Inc.",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "68",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20191209",
"SamplePackage": "N",
"IndicationAndUsage": "Decrease bacteria on hands."
},
{
"NDCCode": "62670-5781-1",
"PackageDescription": "73 mL in 1 BOTTLE (62670-5781-1) ",
"NDC11Code": "62670-5781-01",
"ProductNDC": "62670-5781",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Anti-bacterial Hand",
"ProprietaryNameSuffix": "A Thousand Wishes",
"NonProprietaryName": "Alcohol",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20191209",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333E",
"LabelerName": "Bath & Body Works, Inc.",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "68",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20191209",
"SamplePackage": "N",
"IndicationAndUsage": "Decrease bacteria on hands."
},
{
"NDCCode": "62670-5781-3",
"PackageDescription": "236 mL in 1 BOTTLE, PUMP (62670-5781-3) ",
"NDC11Code": "62670-5781-03",
"ProductNDC": "62670-5781",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Anti-bacterial Hand",
"ProprietaryNameSuffix": "A Thousand Wishes",
"NonProprietaryName": "Alcohol",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20191209",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333E",
"LabelerName": "Bath & Body Works, Inc.",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "68",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20191209",
"SamplePackage": "N",
"IndicationAndUsage": "Decrease bacteria on hands."
},
{
"NDCCode": "81298-2390-1",
"PackageDescription": "1 VIAL in 1 CARTON (81298-2390-1) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL",
"NDC11Code": "81298-2390-01",
"ProductNDC": "81298-2390",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dalbavancin",
"NonProprietaryName": "Dalbavancin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260303",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218602",
"LabelerName": "Long Grove Pharmaceuticals, LLC",
"SubstanceName": "DALBAVANCIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Lipoglycopeptide Antibacterial [EPC], Lipoglycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260303",
"SamplePackage": "N",
"IndicationAndUsage": "Dalbavancin for injection is a lipoglycopeptide antibacterial indicated for the treatment of adult and pediatric patients with acute bacterial skin and skin structure infections (ABSSSI) caused by designated susceptible strains of Gram-positive microorganisms. (1.1). To reduce the development of drug-resistant bacteria and maintain the effectiveness of dalbavancin for injection and other antibacterial drugs, dalbavancin for injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. (1.2).",
"Description": "Dalbavancin for injection is a lipoglycopeptide antibacterial synthesized from a fermentation product of Nonomuraea species. Dalbavancin is a mixture of five closely related active homologs (A0, A1, B0, B1, and B2); the component B0 is the major component of dalbavancin. The homologs share the same core structure and differ in the fatty acid side chain of the N-acylaminoglucuronic acid moiety (R1) structure and/or the presence of an additional methyl group (R2) on the terminal amino group (shown in the Figure 1 and Table 3 below). The B0 INN chemical name is: 5,31-dichloro-38-de(methoxycarbonyl)-7-demethyl-19-deoxy-56-O[2-deoxy-2-[(10-methylundecanoyl)amino]-β-D-glucopyranuronosyl]-38-[[3-(dimethylamino)propyl] carbamoyl]-42-O-α-D-mannopyranosyl-15-N-methyl(ristomycin A aglycone) hydrochloride. Dalbavancin for injection is supplied in clear glass vials as a sterile, lyophilized, preservative-free, white to off-white to pale yellow solid. Each vial contains dalbavancin HCl equivalent to 500 mg of dalbavancin as the free base, plus lactose monohydrate (129 mg) and mannitol (129 mg) as excipients. Sodium hydroxide or hydrochloric acid may be added to adjust the pH at the time of manufacture. The powder is to be reconstituted and further diluted for intravenous infusion [see Dosage and Administration (2.4), How Supplied/Storage and Handling (16)]."
},
{
"NDCCode": "81298-3890-1",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (81298-3890-1) / 2 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "81298-3890-01",
"ProductNDC": "81298-3890",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eribulin Mesylate",
"NonProprietaryName": "Eribulin Mesylate",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240722",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214850",
"LabelerName": "Long Grove Pharmaceuticals, LLC",
"SubstanceName": "ERIBULIN MESYLATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2024-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240722",
"SamplePackage": "N",
"IndicationAndUsage": "Eribulin Mesylate Injection is a microtubule inhibitor indicated for the treatment of patients with: : 1 Metastatic breast cancer who have previously received at least two chemotherapeutic regimens for the treatment of metastatic disease. Prior therapy should have included an anthracycline and a taxane in either the adjuvant or metastatic setting. (1.1) , 2 Unresectable or metastatic liposarcoma who have received a prior anthracycline-containing regimen. (1.2) .",
"Description": "Eribulin mesylate injection contains eribulin mesylate, a microtubule dynamics inhibitor. Eribulin mesylate is a synthetic analogue of halichondrin B, a product isolated from the marine sponge Halichondria okadai. The chemical name for eribulin mesylate is 11,15:18,21:24,28-Triepoxy-7,9-ethano-12,15-methano-9H,15H-furo[3,2-i]furo[2',3':5,6]pyrano[4,3-b][1,4]dioxacyclopentacosin-5(4H)-one, 2-[(2S)-3-amino-2-hydroxypropyl]hexacosahydro-3-methoxy-26-methyl-20,27-bis(methylene)-,(2R,3R,3aS,7R,8aS,9S,10aR,11S,12R,13aR, 13bS,15S,18S,21S,24S,26R,28R,29aS)-, methanesulfonate (salt). It has a molecular weight of 826.0 (729.9 for free base). The empirical formula is C40H59NO11CH4O3S. Eribulin mesylate has the following structural formula:. Eribulin mesylate injection is a clear, colorless, sterile solution for intravenous administration. Each single-dose vial contains 1 mg of eribulin mesylate in 2 mL of solution. Each mL of solution contains 0.5 mg of eribulin mesylate (equivalent to 0.44 mg eribulin) in dehydrated alcohol (5% v/v) and water for injection (95% v/v). Sodium hydroxide or hydrochloric acid may be used for pH adjustment."
},
{
"NDCCode": "81298-5010-3",
"PackageDescription": "10 CARTON in 1 BOX (81298-5010-3) > 1 VIAL, SINGLE-DOSE in 1 CARTON (81298-5010-1) > 1 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "81298-5010-03",
"ProductNDC": "81298-5010",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carboprost Tromethamine",
"NonProprietaryName": "Carboprost Tromethamine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20221015",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214499",
"LabelerName": "Long Grove Pharmaceuticals, LLC",
"SubstanceName": "CARBOPROST TROMETHAMINE",
"StrengthNumber": "250",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Prostaglandin Analog [EPC], Prostaglandins [CS]",
"Status": "Active",
"LastUpdate": "2022-12-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20221015",
"SamplePackage": "N",
"IndicationAndUsage": "Carboprost tromethamine injection is indicated for aborting pregnancy between the 13th and 20th weeks of gestation as calculated from the first day of the last normal menstrual period and in the following conditions related to second trimester abortion: : 1 Failure of expulsion of the fetus during the course of treatment by another method; , 2 Premature rupture of membranes in intrauterine methods with loss of drug and insufficient or absent uterine activity; , 3 Requirement of a repeat intrauterine instillation of drug for expulsion of the fetus; , 4 Inadvertent or spontaneous rupture of membranes in the presence of a previable fetus and absence of adequate activity for expulsion. .",
"Description": "Carboprost tromethamine injection, USP, an oxytocic, contains the tromethamine salt of the (15S)-15 methyl analogue of naturally occurring prostaglandin F2α in a solution suitable for intramuscular injection. Carboprost tromethamine is the established name for the active ingredient in carboprost tromethamine injection, USP. Four other chemical names are: : 1 (15S)-15-methyl prostaglandin F2α tromethamine salt , 2 7-(3α,5α-dihydroxy-2β-[(3S)-3-hydroxy-3-methyl-trans-1-octenyl]-1α cyclopentyl]-cis-5-heptenoic acid compound with 2-amino-2-(hydroxymethyl)- 1,3-propanediol , 3 (15S)-9α,11α,15-trihydroxy-15-methylprosta-cis-5, trans-13-dienoic acid tromethamine salt , 4 (15S)-15-methyl PGF2α-THAM ."
},
{
"NDCCode": "81298-5783-3",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (81298-5783-3) / 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "81298-5783-03",
"ProductNDC": "81298-5783",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Triamcinolone Acetonide",
"NonProprietaryName": "Triamcinolone Acetonide",
"DosageFormName": "SUSPENSION",
"RouteName": "INTRA-ARTERIAL; INTRAMUSCULAR",
"StartMarketingDate": "20220502",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213543",
"LabelerName": "Long Grove Pharmaceuticals, LLC",
"SubstanceName": "TRIAMCINOLONE ACETONIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220502",
"SamplePackage": "N",
"IndicationAndUsage": "Where oral therapy is not feasible, injectable corticosteroid therapy, including triamcinolone acetonide injectable suspension, USP is indicated for intramuscular use as follows:. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, perennial or seasonal allergic rhinitis, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, Diamond-Blackfan anemia, pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous system: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, temporal arteritis, uveitis, and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, polymyositis, and systemic lupus erythematosus.",
"Description": "Triamcinolone acetonide injectable suspension, USP is a synthetic glucocorticoid corticosteroid with anti-inflammatory action. THIS FORMULATION IS SUITABLE FOR INTRAMUSCULAR AND INTRA-ARTICULAR USE ONLY. THIS FORMULATION IS NOT FOR INTRADERMAL INJECTION. Each mL of the sterile aqueous suspension provides 40 mg triamcinolone acetonide, with 0.66% sodium chloride for isotonicity, 0.99% (w/v) benzyl alcohol as a preservative, 0.63% carboxymethylcellulose sodium, and 0.04% polysorbate 80. Sodium hydroxide or hydrochloric acid may be present to adjust pH to 5.0 to 7.5. At the time of manufacture, the air in the container is replaced by nitrogen. The chemical name for triamcinolone acetonide is 9-Fluoro-11β, 16α,17,21-tetrahydroxypregna-1,4-diene- 3,20-dione cyclic 16,17-acetal with acetone. Its structural formula is:. MW 434.50. Triamcinolone acetonide occurs as a white to cream-colored, crystalline powder having not more than a slight odor and is practically insoluble in water and very soluble in alcohol."
},
{
"NDCCode": "81298-7050-3",
"PackageDescription": "2 BAG in 1 CARTON (81298-7050-3) / 100 mL in 1 BAG (81298-7050-1) ",
"NDC11Code": "81298-7050-03",
"ProductNDC": "81298-7050",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Edaravone",
"NonProprietaryName": "Edaravone",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240513",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218354",
"LabelerName": "Long Grove Pharmaceuticals, LLC",
"SubstanceName": "EDARAVONE",
"StrengthNumber": "30",
"StrengthUnit": "mg/100mL",
"Status": "Deprecated",
"LastUpdate": "2025-12-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240513",
"SamplePackage": "N",
"IndicationAndUsage": "Edaravone injection is indicated for the treatment of amyotrophic lateral sclerosis (ALS).",
"Description": "The active ingredient in edaravone injection is edaravone, which is a member of the substituted 2-pyrazolin-5one class. The chemical name of edaravone is [3-methyl-1-phenyl-2-pyrazolin-5-one]. The molecular formula is C10H10N2O and the molecular weight is 174.20. The chemical structure is:. Edaravone is a white crystalline powder with a melting point of 129.7°C. It is freely soluble in acetic acid, methanol, or ethanol and slightly soluble in water or diethyl ether. Edaravone injection is a clear, colorless liquid provided as a sterile solution. Edaravone injection is supplied for intravenous infusion in a polypropylene bag containing 30 mg edaravone in 100 mL isotonic, sterile, aqueous solution, which is further overwrapped with silicon oxide-coated polyester film secondary packaging. The overwrapped package also contains an oxygen absorber and oxygen indicator to minimize oxidation. Each bag contains the following inactive ingredients: L-cysteine hydrochloride hydrate (10 mg), sodium bisulfite (20 mg). Sodium chloride is added for isotonicity and phosphoric acid and sodium hydroxide are added to adjust to pH 4."
},
{
"NDCCode": "81298-7500-1",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (81298-7500-1) / 20 mL in 1 VIAL, GLASS",
"NDC11Code": "81298-7500-01",
"ProductNDC": "81298-7500",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methadone Hydrochloride",
"NonProprietaryName": "Methadone Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250628",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208306",
"LabelerName": "Long Grove Pharmaceuticals, LLC",
"SubstanceName": "METHADONE HYDROCHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/20mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-08-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250628",
"SamplePackage": "N",
"IndicationAndUsage": "Methadone Hydrochloride Injection is indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids.Limitations of UseBecause of the risks of addiction, abuse, and misuse overdose, and death, which can occur at any dosage or duration (see WARNINGS), and persist over the course of therapy, reserve opioid analgesics, including Methadone Hydrochloride Injection, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.Methadone Hydrochloride Injection is not indicated as an as-needed (prn) analgesic. For use in temporary treatment of opioid dependence in patients unable to take oral medication.Limitations of UseInjectable methadone products are not approved for the outpatient treatment of opioid dependence. In this patient population, parenteral methadone is to be used only for patients unable to take oral medication, such as hospitalized patients.",
"Description": "Methadone Hydrochloride Injection USP, 10 mg/mL is an opioid analgesic for parenteral use (intravenous, intramuscular or subcutaneous use). Methadone Hydrochloride Injection USP, 10 mg/mL contains methadone hydrochloride as the active pharmaceutical ingredient. Methadone hydrochloride is a white, crystalline material that is water-soluble. Methadone hydrochloride is chemically described as 6-(dimethylamino)-4,4-diphenyl-3-hepatanone hydrochloride. Its molecular formula is C21H27NOHCl and it has a molecular weight of 345.91. Methadone hydrochloride has a melting point of 235°C, and a pKa of 8.25 in water at 20°C. Its octanol/water partition coefficient at pH 7.4 is 117. A solution (1:100) in water has a pH between 4.5 and 6.5. Methadone hydrochloride has the following structural formula:. Methadone Hydrochloride Injection is a sterile injectable solution available in 20 mL multiple-dose vials. Each mL of the Methadone Hydrochloride Injection contains: 10 mg of methadone hydrochloride (equivalent to 8.95 mg of methadone free base), 5 mg of chlorobutanol, as a preservative, 9 mg of sodium chloride, as tonicity agent, and hydrochloric acid and sodium hydroxide as pH adjusters, in water for injection. The pH of the sterile injectable solution is between 3.0 to 6.5."
},
{
"NDCCode": "81298-7620-3",
"PackageDescription": "20 VIAL in 1 CARTON (81298-7620-3) / 50 mL in 1 VIAL (81298-7620-1) ",
"NDC11Code": "81298-7620-03",
"ProductNDC": "81298-7620",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Bicarbonate",
"NonProprietaryName": "Sodium Bicarbonate Injection,",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216042",
"LabelerName": "Long Grove Pharmaceuticals, LLC",
"SubstanceName": "SODIUM BICARBONATE",
"StrengthNumber": "84",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Alkalinizing Activity [MoA]",
"Status": "Active",
"LastUpdate": "2024-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240930",
"SamplePackage": "N",
"IndicationAndUsage": "Sodium Bicarbonate Injection, USP is indicated in the treatment of metabolic acidosis which may occur in severe renal disease, uncontrolled diabetes, circulatory insufficiency due to shock or severe dehydration, extracorporeal circulation of blood, cardiac arrest and severe primary lactic acidosis. Sodium bicarbonate is further indicated in the treatment of certain drug intoxications, including barbiturates (where dissociation of the barbiturate-protein complex is desired), in poisoning by salicylates or methyl alcohol and in hemolytic reactions requiring alkalinization of the urine to diminish nephrotoxicity of hemoglobin and its breakdown products. Sodium bicarbonate also is indicated in severe diarrhea which is often accompanied by a significant loss of bicarbonate. Treatment of metabolic acidosis should, if possible, be superimposed on measures designed to control the basic cause of the acidosis - e.g., insulin in uncomplicated diabetes, blood volume restoration in shock. But since an appreciable time interval may elapse before all of the ancillary effects are brought about, bicarbonate therapy is indicated to minimize risks inherent to the acidosis itself. Vigorous bicarbonate therapy is required in any form of metabolic acidosis where a rapid increase in plasma total C02 content is crucial - e.g., cardiac arrest, circulatory insufficiency due to shock or severe dehydration, and in severe primary lactic acidosis or severe diabetic acidosis.",
"Description": "Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHC03) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solution is offered in concentration of 8.4%. See table in HOW SUPPLIED section for contents and characteristics. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only for use as a single-dose injection, the approximate pH of the solution is 8. When smaller doses are required, the unused portion should be discarded. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na+ and HCO3-. Sodium Bicarbonate, USP is chemically designated NaHCO3, a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H2O."
},
{
"NDCCode": "81298-8110-1",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (81298-8110-1) / 25 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "81298-8110-01",
"ProductNDC": "81298-8110",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclophosphamide",
"NonProprietaryName": "Cyclophosphamide",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20220101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215089",
"LabelerName": "Long Grove Pharmaceuticals, LLC",
"SubstanceName": "CYCLOPHOSPHAMIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/25mL",
"Pharm_Classes": "Alkylating Activity [MoA], Alkylating Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20220101",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclophosphamide is an alkylating drug indicated for treatment of: 1 Malignant Diseases: malignant lymphomas: Hodgkin’s disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt’s lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma ( 1.1) , 2 Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy ( 1.2) .",
"Description": "Cyclophosphamide is a synthetic antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide is a white crystalline powder with the molecular formula C 7H 15Cl 2N 2O 2PH 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white powder available as 500 mg, 1 g, and 2 g strength vials, ready to be reconstituted into solutions for intravenous use. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide, 2 1 g vial contains 1069.0 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide, 3 2 g vial contains 2138.0 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide."
},
{
"NDCCode": "81298-8112-1",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (81298-8112-1) / 50 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "81298-8112-01",
"ProductNDC": "81298-8112",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclophosphamide",
"NonProprietaryName": "Cyclophosphamide",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20210101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215089",
"LabelerName": "Long Grove Pharmaceuticals, LLC",
"SubstanceName": "CYCLOPHOSPHAMIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/50mL",
"Pharm_Classes": "Alkylating Activity [MoA], Alkylating Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20220101",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclophosphamide is an alkylating drug indicated for treatment of: 1 Malignant Diseases: malignant lymphomas: Hodgkin’s disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt’s lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma ( 1.1) , 2 Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy ( 1.2) .",
"Description": "Cyclophosphamide is a synthetic antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide is a white crystalline powder with the molecular formula C 7H 15Cl 2N 2O 2PH 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white powder available as 500 mg, 1 g, and 2 g strength vials, ready to be reconstituted into solutions for intravenous use. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide, 2 1 g vial contains 1069.0 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide, 3 2 g vial contains 2138.0 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide."
},
{
"NDCCode": "81298-8114-1",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (81298-8114-1) / 100 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "81298-8114-01",
"ProductNDC": "81298-8114",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclophosphamide",
"NonProprietaryName": "Cyclophosphamide",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20220101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215089",
"LabelerName": "Long Grove Pharmaceuticals, LLC",
"SubstanceName": "CYCLOPHOSPHAMIDE",
"StrengthNumber": "2",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Alkylating Activity [MoA], Alkylating Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20220101",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclophosphamide is an alkylating drug indicated for treatment of: 1 Malignant Diseases: malignant lymphomas: Hodgkin’s disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt’s lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma ( 1.1) , 2 Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy ( 1.2) .",
"Description": "Cyclophosphamide is a synthetic antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide is a white crystalline powder with the molecular formula C 7H 15Cl 2N 2O 2PH 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white powder available as 500 mg, 1 g, and 2 g strength vials, ready to be reconstituted into solutions for intravenous use. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide, 2 1 g vial contains 1069.0 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide, 3 2 g vial contains 2138.0 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>81298-5781-5</NDCCode>
<PackageDescription>25 VIAL, SINGLE-USE in 1 CARTON (81298-5781-5) / 1 mL in 1 VIAL, SINGLE-USE (81298-5781-1) </PackageDescription>
<NDC11Code>81298-5781-05</NDC11Code>
<ProductNDC>81298-5781</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Triamcinolone Acetonide</ProprietaryName>
<NonProprietaryName>Triamcinolone Acetonide</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>INTRA-ARTERIAL; INTRAMUSCULAR</RouteName>
<StartMarketingDate>20220502</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213543</ApplicationNumber>
<LabelerName>Long Grove Pharmaceuticals, LLC</LabelerName>
<SubstanceName>TRIAMCINOLONE ACETONIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220502</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Where oral therapy is not feasible, injectable corticosteroid therapy, including triamcinolone acetonide injectable suspension, USP is indicated for intramuscular use as follows:. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, perennial or seasonal allergic rhinitis, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, Diamond-Blackfan anemia, pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous system: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, temporal arteritis, uveitis, and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, polymyositis, and systemic lupus erythematosus.</IndicationAndUsage>
<Description>Triamcinolone acetonide injectable suspension, USP is a synthetic glucocorticoid corticosteroid with anti-inflammatory action. THIS FORMULATION IS SUITABLE FOR INTRAMUSCULAR AND INTRA-ARTICULAR USE ONLY. THIS FORMULATION IS NOT FOR INTRADERMAL INJECTION. Each mL of the sterile aqueous suspension provides 40 mg triamcinolone acetonide, with 0.66% sodium chloride for isotonicity, 0.99% (w/v) benzyl alcohol as a preservative, 0.63% carboxymethylcellulose sodium, and 0.04% polysorbate 80. Sodium hydroxide or hydrochloric acid may be present to adjust pH to 5.0 to 7.5. At the time of manufacture, the air in the container is replaced by nitrogen. The chemical name for triamcinolone acetonide is 9-Fluoro-11β, 16α,17,21-tetrahydroxypregna-1,4-diene- 3,20-dione cyclic 16,17-acetal with acetone. Its structural formula is:. MW 434.50. Triamcinolone acetonide occurs as a white to cream-colored, crystalline powder having not more than a slight odor and is practically insoluble in water and very soluble in alcohol.</Description>
</NDC>
<NDC>
<NDCCode>22840-5781-5</NDCCode>
<PackageDescription>5 mL in 1 BOTTLE, DROPPER (22840-5781-5) </PackageDescription>
<NDC11Code>22840-5781-05</NDC11Code>
<ProductNDC>22840-5781</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Almond Food</ProprietaryName>
<NonProprietaryName>Prunus Dulcis</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>ALMOND</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Dietary Proteins [CS], Increased Histamine Release [PE], Non-Standardized Food Allergenic Extract [EPC], Nut Proteins [EXT]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for: 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies. .</IndicationAndUsage>
<Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
</NDC>
<NDC>
<NDCCode>81298-5010-5</NDCCode>
<PackageDescription>1 CARTON in 1 BOX (81298-5010-5) > 1 VIAL, SINGLE-DOSE in 1 CARTON (81298-5010-1) > 1 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>81298-5010-05</NDC11Code>
<ProductNDC>81298-5010</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carboprost Tromethamine</ProprietaryName>
<NonProprietaryName>Carboprost Tromethamine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20221015</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214499</ApplicationNumber>
<LabelerName>Long Grove Pharmaceuticals, LLC</LabelerName>
<SubstanceName>CARBOPROST TROMETHAMINE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Prostaglandin Analog [EPC], Prostaglandins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carboprost tromethamine injection is indicated for aborting pregnancy between the 13th and 20th weeks of gestation as calculated from the first day of the last normal menstrual period and in the following conditions related to second trimester abortion: : 1 Failure of expulsion of the fetus during the course of treatment by another method; , 2 Premature rupture of membranes in intrauterine methods with loss of drug and insufficient or absent uterine activity; , 3 Requirement of a repeat intrauterine instillation of drug for expulsion of the fetus; , 4 Inadvertent or spontaneous rupture of membranes in the presence of a previable fetus and absence of adequate activity for expulsion. .</IndicationAndUsage>
<Description>Carboprost tromethamine injection, USP, an oxytocic, contains the tromethamine salt of the (15S)-15 methyl analogue of naturally occurring prostaglandin F2α in a solution suitable for intramuscular injection. Carboprost tromethamine is the established name for the active ingredient in carboprost tromethamine injection, USP. Four other chemical names are: : 1 (15S)-15-methyl prostaglandin F2α tromethamine salt , 2 7-(3α,5α-dihydroxy-2β-[(3S)-3-hydroxy-3-methyl-trans-1-octenyl]-1α cyclopentyl]-cis-5-heptenoic acid compound with 2-amino-2-(hydroxymethyl)- 1,3-propanediol , 3 (15S)-9α,11α,15-trihydroxy-15-methylprosta-cis-5, trans-13-dienoic acid tromethamine salt , 4 (15S)-15-methyl PGF2α-THAM .</Description>
</NDC>
<NDC>
<NDCCode>81298-5785-3</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (81298-5785-3) / 5 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>81298-5785-03</NDC11Code>
<ProductNDC>81298-5785</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Triamcinolone Acetonide</ProprietaryName>
<NonProprietaryName>Triamcinolone Acetonide</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>INTRA-ARTERIAL; INTRAMUSCULAR</RouteName>
<StartMarketingDate>20220502</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213543</ApplicationNumber>
<LabelerName>Long Grove Pharmaceuticals, LLC</LabelerName>
<SubstanceName>TRIAMCINOLONE ACETONIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220502</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Where oral therapy is not feasible, injectable corticosteroid therapy, including triamcinolone acetonide injectable suspension, USP is indicated for intramuscular use as follows:. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, perennial or seasonal allergic rhinitis, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, Diamond-Blackfan anemia, pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous system: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, temporal arteritis, uveitis, and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, polymyositis, and systemic lupus erythematosus.</IndicationAndUsage>
<Description>Triamcinolone acetonide injectable suspension, USP is a synthetic glucocorticoid corticosteroid with anti-inflammatory action. THIS FORMULATION IS SUITABLE FOR INTRAMUSCULAR AND INTRA-ARTICULAR USE ONLY. THIS FORMULATION IS NOT FOR INTRADERMAL INJECTION. Each mL of the sterile aqueous suspension provides 40 mg triamcinolone acetonide, with 0.66% sodium chloride for isotonicity, 0.99% (w/v) benzyl alcohol as a preservative, 0.63% carboxymethylcellulose sodium, and 0.04% polysorbate 80. Sodium hydroxide or hydrochloric acid may be present to adjust pH to 5.0 to 7.5. At the time of manufacture, the air in the container is replaced by nitrogen. The chemical name for triamcinolone acetonide is 9-Fluoro-11β, 16α,17,21-tetrahydroxypregna-1,4-diene- 3,20-dione cyclic 16,17-acetal with acetone. Its structural formula is:. MW 434.50. Triamcinolone acetonide occurs as a white to cream-colored, crystalline powder having not more than a slight odor and is practically insoluble in water and very soluble in alcohol.</Description>
</NDC>
<NDC>
<NDCCode>81298-8660-3</NDCCode>
<PackageDescription>12 VIAL, GLASS in 1 CARTON (81298-8660-3) / 5 mL in 1 VIAL, GLASS (81298-8660-1) </PackageDescription>
<NDC11Code>81298-8660-03</NDC11Code>
<ProductNDC>81298-8660</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ak-fluor</ProprietaryName>
<NonProprietaryName>Fluorescein</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240928</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022186</ApplicationNumber>
<LabelerName>Long Grove Pharmaceuticals, LLC</LabelerName>
<SubstanceName>FLUORESCEIN SODIUM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Diagnostic Dye [EPC], Dyes [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240928</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>AK-FLUOR® 10% (100 mg/mL) is indicated in diagnostic fluorescein angiography or angioscopy of the retina and iris vasculature.</IndicationAndUsage>
<Description>AK-FLUOR (fluorescein injection) contains fluorescein sodium, a diagnostic aid, in a sterile solution for use intravenously. It is a dark reddish orange clear solution with a pH of 8.3 to 9.8 and an osmolality of 572 to 858 mOsm/kg. Its chemical name is spiro[isobenzofuran-1 (3H),9'-[9H]xanthene]-3-one,3'6'- dihydroxy, disodium salt. Its molecular weight is 376.27. The active ingredient is represented by the chemical structure:. AK-FLUOR (500 mg/5 mL) (100 mg/mL) 10% contains: : 1 Active ingredient: fluorescein sodium (10 % w/v, 100 mg/mL), equivalent to 88.3 mg/ml of fluorescein , 2 Inactive ingredients: sodium hydroxide and/or hydrochloric acid may be used to adjust pH (8.3 to 9.8), and Water for Injection. .</Description>
</NDC>
<NDC>
<NDCCode>0904-5781-09</NDCCode>
<PackageDescription>237 mL in 1 BOTTLE, PLASTIC (0904-5781-09)</PackageDescription>
<NDC11Code>00904-5781-09</NDC11Code>
<ProductNDC>0904-5781</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Dibromm</ProprietaryName>
<ProprietaryNameSuffix>With Pe</ProprietaryNameSuffix>
<NonProprietaryName>Brompheniramine Maleate, Phenylephrine Hydrochloride</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090107</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>Major Pharmaceuticals</LabelerName>
<SubstanceName>BROMPHENIRAMINE MALEATE; PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1; 2.5</StrengthNumber>
<StrengthUnit>mg/5mL; mg/5mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-07-25</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0904-5781-20</NDCCode>
<PackageDescription>118 mL in 1 BOTTLE (0904-5781-20) </PackageDescription>
<NDC11Code>00904-5781-20</NDC11Code>
<ProductNDC>0904-5781</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Dibromm</ProprietaryName>
<ProprietaryNameSuffix>With Pe</ProprietaryNameSuffix>
<NonProprietaryName>Brompheniramine Maleate, Phenylephrine Hydrochloride</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090107</StartMarketingDate>
<EndMarketingDate>20180930</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>Major Pharmaceuticals</LabelerName>
<SubstanceName>BROMPHENIRAMINE MALEATE; PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1; 2.5</StrengthNumber>
<StrengthUnit>mg/5mL; mg/5mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-10-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20090107</StartMarketingDatePackage>
<EndMarketingDatePackage>20180930</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>50090-5781-0</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (50090-5781-0) </PackageDescription>
<NDC11Code>50090-5781-00</NDC11Code>
<ProductNDC>50090-5781</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clopidogrel</ProprietaryName>
<NonProprietaryName>Clopidogrel</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121016</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202928</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>CLOPIDOGREL BISULFATE</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C8 Inhibitors [MoA], Decreased Platelet Aggregation [PE], P2Y12 Platelet Inhibitor [EPC], P2Y12 Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211008</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clopidogrel is a P2Y12 platelet inhibitor indicated for: Acute coronary syndrome -For patients with non-ST-segment elevation ACS (unstable angina [UA]/non-ST-elevation myocardial infarction [NSTEMI]), clopidogrel has been shown to reduce the rate of myocardial infarction (MI) and stroke. (1.1) - For patients with ST-elevation myocardial infarction (STEMI), clopidogrel has been shown to reduce the rate of MI and stroke. (1.1) Recent MI, recent stroke, or established peripheral arterial disease. Clopidogrel has been shown to reduce the rate of MI and stroke. (1.2).</IndicationAndUsage>
<Description>Clopidogrel tablets, USP is a thienopyridine class inhibitor of P2Y12 ADP platelet receptors. Chemically it is methyl (+)-(S)-α-(2-chlorophenyl)-6,7-dihydrothieno[3,2-c]pyridine-5(4H)-acetate sulfate (1:1). The empirical formula of clopidogrel bisulfate is C16H16ClNO2SH2SO4 and its molecular weight is 419.9. The structural formula is as follows:. Clopidogrel bisulfate, USP are a white to off-white powder. It is practically insoluble in water at neutral pH but freely soluble at pH 1. It also dissolves freely in methanol, dissolves sparingly in methylene chloride, and is practically insoluble in ethyl ether. It has a specific optical rotation of about +56°. Clopidogrel tablets USP, 75 mg for oral administration is provided as pink, circular, biconvex, debossed, film-coated tablets containing 97.875 mg of clopidogrel bisulfate which is the molar equivalent of 75 mg of clopidogrel base. Each tablet contains lactose monohydrate, low substituted hydroxypropyl cellulose, colloidal silicon dioxide, dimethicone and hydrogenated castor oil as inactive ingredients. The pink film coating contains hypromellose 2910, polyethylene glycol 400, titanium dioxide and iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>50090-5781-1</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (50090-5781-1) </PackageDescription>
<NDC11Code>50090-5781-01</NDC11Code>
<ProductNDC>50090-5781</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clopidogrel</ProprietaryName>
<NonProprietaryName>Clopidogrel</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121016</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202928</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>CLOPIDOGREL BISULFATE</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C8 Inhibitors [MoA], Decreased Platelet Aggregation [PE], P2Y12 Platelet Inhibitor [EPC], P2Y12 Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211008</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clopidogrel is a P2Y12 platelet inhibitor indicated for: Acute coronary syndrome -For patients with non-ST-segment elevation ACS (unstable angina [UA]/non-ST-elevation myocardial infarction [NSTEMI]), clopidogrel has been shown to reduce the rate of myocardial infarction (MI) and stroke. (1.1) - For patients with ST-elevation myocardial infarction (STEMI), clopidogrel has been shown to reduce the rate of MI and stroke. (1.1) Recent MI, recent stroke, or established peripheral arterial disease. Clopidogrel has been shown to reduce the rate of MI and stroke. (1.2).</IndicationAndUsage>
<Description>Clopidogrel tablets, USP is a thienopyridine class inhibitor of P2Y12 ADP platelet receptors. Chemically it is methyl (+)-(S)-α-(2-chlorophenyl)-6,7-dihydrothieno[3,2-c]pyridine-5(4H)-acetate sulfate (1:1). The empirical formula of clopidogrel bisulfate is C16H16ClNO2SH2SO4 and its molecular weight is 419.9. The structural formula is as follows:. Clopidogrel bisulfate, USP are a white to off-white powder. It is practically insoluble in water at neutral pH but freely soluble at pH 1. It also dissolves freely in methanol, dissolves sparingly in methylene chloride, and is practically insoluble in ethyl ether. It has a specific optical rotation of about +56°. Clopidogrel tablets USP, 75 mg for oral administration is provided as pink, circular, biconvex, debossed, film-coated tablets containing 97.875 mg of clopidogrel bisulfate which is the molar equivalent of 75 mg of clopidogrel base. Each tablet contains lactose monohydrate, low substituted hydroxypropyl cellulose, colloidal silicon dioxide, dimethicone and hydrogenated castor oil as inactive ingredients. The pink film coating contains hypromellose 2910, polyethylene glycol 400, titanium dioxide and iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>54868-5781-0</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (54868-5781-0)</PackageDescription>
<NDC11Code>54868-5781-00</NDC11Code>
<ProductNDC>54868-5781</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine Besylate And Benazepril Hydrochloride</ProprietaryName>
<NonProprietaryName>Amlodipine Besylate And Benazepril Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20071026</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078466</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE; BENAZEPRIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10; 20</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA],Dihydropyridine Calcium Channel Blocker [EPC],Dihydropyridines [Chemical/Ingredient],Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA],Decreased Blood Pressure [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Amlodipine besylate and benazepril hydrochloride capsule is a combination tablet of amlodipine, a dihydropyridine calcium channel blocker (DHP CCB) and benazepril, an angiotensin converting enzyme (ACE) inhibitor. Amlodipine besylate and benazepril hydrochloride is indicated for the treatment of hypertension (1) in patients not adequately controlled on monotherapy with either agent.</IndicationAndUsage>
<Description>Amlodipine besylate and benazepril hydrochloride capsule is a combination of amlodipine besylate and benazepril hydrochloride. Benazepril hydrochloride is a white to off-white crystalline powder, soluble (>100 mg/mL) in water, in ethanol, and in methanol. Benazepril hydrochloride’s chemical name is 3-[[1-(ethoxycarbonyl)-3-phenyl-(1S)-propyl]amino]-2,3,4,5-tetrahydro-2-oxo-1H-1-(3S)-benzazepine-1-acetic acid monohydrochloride; its structural formula is. Its empirical formula is C24H28N2O5. HCl, and its molecular weight is 460.96. Benazeprilat, the active metabolite of benazepril, is a nonsulfhydryl angiotensin-converting enzyme (ACE) inhibitor. Benazepril is converted to benazeprilat by hepatic cleavage of the ester group. Amlodipine besylate is a white to pale yellow crystalline powder, slightly soluble in water and sparingly soluble in ethanol. Its chemical name is (R,S)3-ethyl-5-methyl-2-(2-aminoethoxymethyl)-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate benzenesulfonate; its structural formula is. Its empirical formula is C20H25ClN2O5.C6H6O3S, and its molecular weight is 567.1. Amlodipine besylate is the besylate salt of amlodipine, a dihydropyridine calcium channel blocker. Amlodipine besylate and benazepril hydrochloride capsules are formulated in six different strengths for oral administration with a combination of amlodipine besylate equivalent to 2.5 mg, 5 mg or 10 mg of amlodipine, with 10 mg, 20 mg or 40 mg of benazepril hydrochloride providing for the following available combinations: 2.5 mg/10 mg, 5 mg/10 mg, 5 mg/20 mg, 5 mg/40 mg, 10 mg/20 mg and 10 mg/40 mg. The inactive ingredients of the capsules are crospovidone, hydrophobic fumed silica, lactose anhydrous, magnesium stearate, microcrystalline cellulose, povidone, gelatin, titanium dioxide (not present in 10 mg/20 mg strength), black iron oxide, red iron oxide (present in 5 mg/10 mg, 5 mg/20 mg and 10 mg/ 20 mg strength), yellow iron oxide, (present in 5 mg/10 mg strength), D&C Yellow #10 (present in 5 mg/40 mg strength), FD&C Blue #1 (present in 10 mg/40 mg strength), FD&C Blue #2 (present in 10 mg/20 mg strength), FD&C Green #3 (present in 5 mg/40 mg strength),FD&C Red #40 (present in 10 mg/40 mg strength), FD&C Yellow #6 (present in 5 mg/ 40 mg strength), shellac, propylene glycol, potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>54868-5781-1</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (54868-5781-1)</PackageDescription>
<NDC11Code>54868-5781-01</NDC11Code>
<ProductNDC>54868-5781</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine Besylate And Benazepril Hydrochloride</ProprietaryName>
<NonProprietaryName>Amlodipine Besylate And Benazepril Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20071026</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078466</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE; BENAZEPRIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10; 20</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA],Dihydropyridine Calcium Channel Blocker [EPC],Dihydropyridines [Chemical/Ingredient],Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA],Decreased Blood Pressure [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Amlodipine besylate and benazepril hydrochloride capsule is a combination tablet of amlodipine, a dihydropyridine calcium channel blocker (DHP CCB) and benazepril, an angiotensin converting enzyme (ACE) inhibitor. Amlodipine besylate and benazepril hydrochloride is indicated for the treatment of hypertension (1) in patients not adequately controlled on monotherapy with either agent.</IndicationAndUsage>
<Description>Amlodipine besylate and benazepril hydrochloride capsule is a combination of amlodipine besylate and benazepril hydrochloride. Benazepril hydrochloride is a white to off-white crystalline powder, soluble (>100 mg/mL) in water, in ethanol, and in methanol. Benazepril hydrochloride’s chemical name is 3-[[1-(ethoxycarbonyl)-3-phenyl-(1S)-propyl]amino]-2,3,4,5-tetrahydro-2-oxo-1H-1-(3S)-benzazepine-1-acetic acid monohydrochloride; its structural formula is. Its empirical formula is C24H28N2O5. HCl, and its molecular weight is 460.96. Benazeprilat, the active metabolite of benazepril, is a nonsulfhydryl angiotensin-converting enzyme (ACE) inhibitor. Benazepril is converted to benazeprilat by hepatic cleavage of the ester group. Amlodipine besylate is a white to pale yellow crystalline powder, slightly soluble in water and sparingly soluble in ethanol. Its chemical name is (R,S)3-ethyl-5-methyl-2-(2-aminoethoxymethyl)-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate benzenesulfonate; its structural formula is. Its empirical formula is C20H25ClN2O5.C6H6O3S, and its molecular weight is 567.1. Amlodipine besylate is the besylate salt of amlodipine, a dihydropyridine calcium channel blocker. Amlodipine besylate and benazepril hydrochloride capsules are formulated in six different strengths for oral administration with a combination of amlodipine besylate equivalent to 2.5 mg, 5 mg or 10 mg of amlodipine, with 10 mg, 20 mg or 40 mg of benazepril hydrochloride providing for the following available combinations: 2.5 mg/10 mg, 5 mg/10 mg, 5 mg/20 mg, 5 mg/40 mg, 10 mg/20 mg and 10 mg/40 mg. The inactive ingredients of the capsules are crospovidone, hydrophobic fumed silica, lactose anhydrous, magnesium stearate, microcrystalline cellulose, povidone, gelatin, titanium dioxide (not present in 10 mg/20 mg strength), black iron oxide, red iron oxide (present in 5 mg/10 mg, 5 mg/20 mg and 10 mg/ 20 mg strength), yellow iron oxide, (present in 5 mg/10 mg strength), D&C Yellow #10 (present in 5 mg/40 mg strength), FD&C Blue #1 (present in 10 mg/40 mg strength), FD&C Blue #2 (present in 10 mg/20 mg strength), FD&C Green #3 (present in 5 mg/40 mg strength),FD&C Red #40 (present in 10 mg/40 mg strength), FD&C Yellow #6 (present in 5 mg/ 40 mg strength), shellac, propylene glycol, potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>54868-5781-2</NDCCode>
<PackageDescription>10 CAPSULE in 1 BOTTLE (54868-5781-2)</PackageDescription>
<NDC11Code>54868-5781-02</NDC11Code>
<ProductNDC>54868-5781</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine Besylate And Benazepril Hydrochloride</ProprietaryName>
<NonProprietaryName>Amlodipine Besylate And Benazepril Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20071026</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078466</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE; BENAZEPRIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10; 20</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA],Dihydropyridine Calcium Channel Blocker [EPC],Dihydropyridines [Chemical/Ingredient],Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA],Decreased Blood Pressure [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Amlodipine besylate and benazepril hydrochloride capsule is a combination tablet of amlodipine, a dihydropyridine calcium channel blocker (DHP CCB) and benazepril, an angiotensin converting enzyme (ACE) inhibitor. Amlodipine besylate and benazepril hydrochloride is indicated for the treatment of hypertension (1) in patients not adequately controlled on monotherapy with either agent.</IndicationAndUsage>
<Description>Amlodipine besylate and benazepril hydrochloride capsule is a combination of amlodipine besylate and benazepril hydrochloride. Benazepril hydrochloride is a white to off-white crystalline powder, soluble (>100 mg/mL) in water, in ethanol, and in methanol. Benazepril hydrochloride’s chemical name is 3-[[1-(ethoxycarbonyl)-3-phenyl-(1S)-propyl]amino]-2,3,4,5-tetrahydro-2-oxo-1H-1-(3S)-benzazepine-1-acetic acid monohydrochloride; its structural formula is. Its empirical formula is C24H28N2O5. HCl, and its molecular weight is 460.96. Benazeprilat, the active metabolite of benazepril, is a nonsulfhydryl angiotensin-converting enzyme (ACE) inhibitor. Benazepril is converted to benazeprilat by hepatic cleavage of the ester group. Amlodipine besylate is a white to pale yellow crystalline powder, slightly soluble in water and sparingly soluble in ethanol. Its chemical name is (R,S)3-ethyl-5-methyl-2-(2-aminoethoxymethyl)-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate benzenesulfonate; its structural formula is. Its empirical formula is C20H25ClN2O5.C6H6O3S, and its molecular weight is 567.1. Amlodipine besylate is the besylate salt of amlodipine, a dihydropyridine calcium channel blocker. Amlodipine besylate and benazepril hydrochloride capsules are formulated in six different strengths for oral administration with a combination of amlodipine besylate equivalent to 2.5 mg, 5 mg or 10 mg of amlodipine, with 10 mg, 20 mg or 40 mg of benazepril hydrochloride providing for the following available combinations: 2.5 mg/10 mg, 5 mg/10 mg, 5 mg/20 mg, 5 mg/40 mg, 10 mg/20 mg and 10 mg/40 mg. The inactive ingredients of the capsules are crospovidone, hydrophobic fumed silica, lactose anhydrous, magnesium stearate, microcrystalline cellulose, povidone, gelatin, titanium dioxide (not present in 10 mg/20 mg strength), black iron oxide, red iron oxide (present in 5 mg/10 mg, 5 mg/20 mg and 10 mg/ 20 mg strength), yellow iron oxide, (present in 5 mg/10 mg strength), D&C Yellow #10 (present in 5 mg/40 mg strength), FD&C Blue #1 (present in 10 mg/40 mg strength), FD&C Blue #2 (present in 10 mg/20 mg strength), FD&C Green #3 (present in 5 mg/40 mg strength),FD&C Red #40 (present in 10 mg/40 mg strength), FD&C Yellow #6 (present in 5 mg/ 40 mg strength), shellac, propylene glycol, potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>54868-5781-3</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (54868-5781-3)</PackageDescription>
<NDC11Code>54868-5781-03</NDC11Code>
<ProductNDC>54868-5781</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine Besylate And Benazepril Hydrochloride</ProprietaryName>
<NonProprietaryName>Amlodipine Besylate And Benazepril Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20071026</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078466</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE; BENAZEPRIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10; 20</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA],Dihydropyridine Calcium Channel Blocker [EPC],Dihydropyridines [Chemical/Ingredient],Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA],Decreased Blood Pressure [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Amlodipine besylate and benazepril hydrochloride capsule is a combination tablet of amlodipine, a dihydropyridine calcium channel blocker (DHP CCB) and benazepril, an angiotensin converting enzyme (ACE) inhibitor. Amlodipine besylate and benazepril hydrochloride is indicated for the treatment of hypertension (1) in patients not adequately controlled on monotherapy with either agent.</IndicationAndUsage>
<Description>Amlodipine besylate and benazepril hydrochloride capsule is a combination of amlodipine besylate and benazepril hydrochloride. Benazepril hydrochloride is a white to off-white crystalline powder, soluble (>100 mg/mL) in water, in ethanol, and in methanol. Benazepril hydrochloride’s chemical name is 3-[[1-(ethoxycarbonyl)-3-phenyl-(1S)-propyl]amino]-2,3,4,5-tetrahydro-2-oxo-1H-1-(3S)-benzazepine-1-acetic acid monohydrochloride; its structural formula is. Its empirical formula is C24H28N2O5. HCl, and its molecular weight is 460.96. Benazeprilat, the active metabolite of benazepril, is a nonsulfhydryl angiotensin-converting enzyme (ACE) inhibitor. Benazepril is converted to benazeprilat by hepatic cleavage of the ester group. Amlodipine besylate is a white to pale yellow crystalline powder, slightly soluble in water and sparingly soluble in ethanol. Its chemical name is (R,S)3-ethyl-5-methyl-2-(2-aminoethoxymethyl)-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate benzenesulfonate; its structural formula is. Its empirical formula is C20H25ClN2O5.C6H6O3S, and its molecular weight is 567.1. Amlodipine besylate is the besylate salt of amlodipine, a dihydropyridine calcium channel blocker. Amlodipine besylate and benazepril hydrochloride capsules are formulated in six different strengths for oral administration with a combination of amlodipine besylate equivalent to 2.5 mg, 5 mg or 10 mg of amlodipine, with 10 mg, 20 mg or 40 mg of benazepril hydrochloride providing for the following available combinations: 2.5 mg/10 mg, 5 mg/10 mg, 5 mg/20 mg, 5 mg/40 mg, 10 mg/20 mg and 10 mg/40 mg. The inactive ingredients of the capsules are crospovidone, hydrophobic fumed silica, lactose anhydrous, magnesium stearate, microcrystalline cellulose, povidone, gelatin, titanium dioxide (not present in 10 mg/20 mg strength), black iron oxide, red iron oxide (present in 5 mg/10 mg, 5 mg/20 mg and 10 mg/ 20 mg strength), yellow iron oxide, (present in 5 mg/10 mg strength), D&C Yellow #10 (present in 5 mg/40 mg strength), FD&C Blue #1 (present in 10 mg/40 mg strength), FD&C Blue #2 (present in 10 mg/20 mg strength), FD&C Green #3 (present in 5 mg/40 mg strength),FD&C Red #40 (present in 10 mg/40 mg strength), FD&C Yellow #6 (present in 5 mg/ 40 mg strength), shellac, propylene glycol, potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>0603-5781-10</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE, PLASTIC (0603-5781-10)</PackageDescription>
<NDC11Code>00603-5781-10</NDC11Code>
<ProductNDC>0603-5781</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sulfamethoxazole And Trimethoprim</ProprietaryName>
<NonProprietaryName>Sulfamethoxazole And Trimethoprim</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070125</StartMarketingDate>
<EndMarketingDate>20180117</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078060</ApplicationNumber>
<LabelerName>Qualitest Pharmaceuticals</LabelerName>
<SubstanceName>SULFAMETHOXAZOLE; TRIMETHOPRIM</SubstanceName>
<StrengthNumber>800; 160</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Sulfonamide Antimicrobial [EPC],Sulfonamides [Chemical/Ingredient],Cytochrome P450 2C9 Inhibitors [MoA],Dihydrofolate Reductase Inhibitor Antibacterial [EPC],Dihydrofolate Reductase Inhibitors [MoA],Cytochrome P450 2C8 Inhibitors [MoA],Organic Cation Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-01-17</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0603-5781-21</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE, PLASTIC (0603-5781-21)</PackageDescription>
<NDC11Code>00603-5781-21</NDC11Code>
<ProductNDC>0603-5781</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sulfamethoxazole And Trimethoprim</ProprietaryName>
<NonProprietaryName>Sulfamethoxazole And Trimethoprim</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070125</StartMarketingDate>
<EndMarketingDate>20180117</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078060</ApplicationNumber>
<LabelerName>Qualitest Pharmaceuticals</LabelerName>
<SubstanceName>SULFAMETHOXAZOLE; TRIMETHOPRIM</SubstanceName>
<StrengthNumber>800; 160</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Sulfonamide Antimicrobial [EPC],Sulfonamides [Chemical/Ingredient],Cytochrome P450 2C9 Inhibitors [MoA],Dihydrofolate Reductase Inhibitor Antibacterial [EPC],Dihydrofolate Reductase Inhibitors [MoA],Cytochrome P450 2C8 Inhibitors [MoA],Organic Cation Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-01-17</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0603-5781-28</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE, PLASTIC (0603-5781-28)</PackageDescription>
<NDC11Code>00603-5781-28</NDC11Code>
<ProductNDC>0603-5781</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sulfamethoxazole And Trimethoprim</ProprietaryName>
<NonProprietaryName>Sulfamethoxazole And Trimethoprim</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070125</StartMarketingDate>
<EndMarketingDate>20180117</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078060</ApplicationNumber>
<LabelerName>Qualitest Pharmaceuticals</LabelerName>
<SubstanceName>SULFAMETHOXAZOLE; TRIMETHOPRIM</SubstanceName>
<StrengthNumber>800; 160</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Sulfonamide Antimicrobial [EPC],Sulfonamides [Chemical/Ingredient],Cytochrome P450 2C9 Inhibitors [MoA],Dihydrofolate Reductase Inhibitor Antibacterial [EPC],Dihydrofolate Reductase Inhibitors [MoA],Cytochrome P450 2C8 Inhibitors [MoA],Organic Cation Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-01-17</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>22840-5781-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (22840-5781-2) </PackageDescription>
<NDC11Code>22840-5781-02</NDC11Code>
<ProductNDC>22840-5781</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Almond Food</ProprietaryName>
<NonProprietaryName>Prunus Dulcis</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>ALMOND</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Dietary Proteins [CS], Increased Histamine Release [PE], Non-Standardized Food Allergenic Extract [EPC], Nut Proteins [EXT]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for: 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies. .</IndicationAndUsage>
<Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
</NDC>
<NDC>
<NDCCode>62670-5781-0</NDCCode>
<PackageDescription>29 mL in 1 BOTTLE (62670-5781-0) </PackageDescription>
<NDC11Code>62670-5781-00</NDC11Code>
<ProductNDC>62670-5781</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Anti-bacterial Hand</ProprietaryName>
<ProprietaryNameSuffix>A Thousand Wishes</ProprietaryNameSuffix>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20191209</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333E</ApplicationNumber>
<LabelerName>Bath & Body Works, Inc.</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>68</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191209</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Decrease bacteria on hands.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>62670-5781-1</NDCCode>
<PackageDescription>73 mL in 1 BOTTLE (62670-5781-1) </PackageDescription>
<NDC11Code>62670-5781-01</NDC11Code>
<ProductNDC>62670-5781</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Anti-bacterial Hand</ProprietaryName>
<ProprietaryNameSuffix>A Thousand Wishes</ProprietaryNameSuffix>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20191209</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333E</ApplicationNumber>
<LabelerName>Bath & Body Works, Inc.</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>68</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191209</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Decrease bacteria on hands.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>62670-5781-3</NDCCode>
<PackageDescription>236 mL in 1 BOTTLE, PUMP (62670-5781-3) </PackageDescription>
<NDC11Code>62670-5781-03</NDC11Code>
<ProductNDC>62670-5781</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Anti-bacterial Hand</ProprietaryName>
<ProprietaryNameSuffix>A Thousand Wishes</ProprietaryNameSuffix>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20191209</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333E</ApplicationNumber>
<LabelerName>Bath & Body Works, Inc.</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>68</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191209</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Decrease bacteria on hands.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>81298-2390-1</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (81298-2390-1) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>81298-2390-01</NDC11Code>
<ProductNDC>81298-2390</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dalbavancin</ProprietaryName>
<NonProprietaryName>Dalbavancin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260303</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218602</ApplicationNumber>
<LabelerName>Long Grove Pharmaceuticals, LLC</LabelerName>
<SubstanceName>DALBAVANCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Lipoglycopeptide Antibacterial [EPC], Lipoglycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260303</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dalbavancin for injection is a lipoglycopeptide antibacterial indicated for the treatment of adult and pediatric patients with acute bacterial skin and skin structure infections (ABSSSI) caused by designated susceptible strains of Gram-positive microorganisms. (1.1). To reduce the development of drug-resistant bacteria and maintain the effectiveness of dalbavancin for injection and other antibacterial drugs, dalbavancin for injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. (1.2).</IndicationAndUsage>
<Description>Dalbavancin for injection is a lipoglycopeptide antibacterial synthesized from a fermentation product of Nonomuraea species. Dalbavancin is a mixture of five closely related active homologs (A0, A1, B0, B1, and B2); the component B0 is the major component of dalbavancin. The homologs share the same core structure and differ in the fatty acid side chain of the N-acylaminoglucuronic acid moiety (R1) structure and/or the presence of an additional methyl group (R2) on the terminal amino group (shown in the Figure 1 and Table 3 below). The B0 INN chemical name is: 5,31-dichloro-38-de(methoxycarbonyl)-7-demethyl-19-deoxy-56-O[2-deoxy-2-[(10-methylundecanoyl)amino]-β-D-glucopyranuronosyl]-38-[[3-(dimethylamino)propyl] carbamoyl]-42-O-α-D-mannopyranosyl-15-N-methyl(ristomycin A aglycone) hydrochloride. Dalbavancin for injection is supplied in clear glass vials as a sterile, lyophilized, preservative-free, white to off-white to pale yellow solid. Each vial contains dalbavancin HCl equivalent to 500 mg of dalbavancin as the free base, plus lactose monohydrate (129 mg) and mannitol (129 mg) as excipients. Sodium hydroxide or hydrochloric acid may be added to adjust the pH at the time of manufacture. The powder is to be reconstituted and further diluted for intravenous infusion [see Dosage and Administration (2.4), How Supplied/Storage and Handling (16)].</Description>
</NDC>
<NDC>
<NDCCode>81298-3890-1</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (81298-3890-1) / 2 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>81298-3890-01</NDC11Code>
<ProductNDC>81298-3890</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eribulin Mesylate</ProprietaryName>
<NonProprietaryName>Eribulin Mesylate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240722</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214850</ApplicationNumber>
<LabelerName>Long Grove Pharmaceuticals, LLC</LabelerName>
<SubstanceName>ERIBULIN MESYLATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240722</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Eribulin Mesylate Injection is a microtubule inhibitor indicated for the treatment of patients with: : 1 Metastatic breast cancer who have previously received at least two chemotherapeutic regimens for the treatment of metastatic disease. Prior therapy should have included an anthracycline and a taxane in either the adjuvant or metastatic setting. (1.1) , 2 Unresectable or metastatic liposarcoma who have received a prior anthracycline-containing regimen. (1.2) .</IndicationAndUsage>
<Description>Eribulin mesylate injection contains eribulin mesylate, a microtubule dynamics inhibitor. Eribulin mesylate is a synthetic analogue of halichondrin B, a product isolated from the marine sponge Halichondria okadai. The chemical name for eribulin mesylate is 11,15:18,21:24,28-Triepoxy-7,9-ethano-12,15-methano-9H,15H-furo[3,2-i]furo[2',3':5,6]pyrano[4,3-b][1,4]dioxacyclopentacosin-5(4H)-one, 2-[(2S)-3-amino-2-hydroxypropyl]hexacosahydro-3-methoxy-26-methyl-20,27-bis(methylene)-,(2R,3R,3aS,7R,8aS,9S,10aR,11S,12R,13aR, 13bS,15S,18S,21S,24S,26R,28R,29aS)-, methanesulfonate (salt). It has a molecular weight of 826.0 (729.9 for free base). The empirical formula is C40H59NO11CH4O3S. Eribulin mesylate has the following structural formula:. Eribulin mesylate injection is a clear, colorless, sterile solution for intravenous administration. Each single-dose vial contains 1 mg of eribulin mesylate in 2 mL of solution. Each mL of solution contains 0.5 mg of eribulin mesylate (equivalent to 0.44 mg eribulin) in dehydrated alcohol (5% v/v) and water for injection (95% v/v). Sodium hydroxide or hydrochloric acid may be used for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>81298-5010-3</NDCCode>
<PackageDescription>10 CARTON in 1 BOX (81298-5010-3) > 1 VIAL, SINGLE-DOSE in 1 CARTON (81298-5010-1) > 1 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>81298-5010-03</NDC11Code>
<ProductNDC>81298-5010</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carboprost Tromethamine</ProprietaryName>
<NonProprietaryName>Carboprost Tromethamine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20221015</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214499</ApplicationNumber>
<LabelerName>Long Grove Pharmaceuticals, LLC</LabelerName>
<SubstanceName>CARBOPROST TROMETHAMINE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Prostaglandin Analog [EPC], Prostaglandins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221015</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carboprost tromethamine injection is indicated for aborting pregnancy between the 13th and 20th weeks of gestation as calculated from the first day of the last normal menstrual period and in the following conditions related to second trimester abortion: : 1 Failure of expulsion of the fetus during the course of treatment by another method; , 2 Premature rupture of membranes in intrauterine methods with loss of drug and insufficient or absent uterine activity; , 3 Requirement of a repeat intrauterine instillation of drug for expulsion of the fetus; , 4 Inadvertent or spontaneous rupture of membranes in the presence of a previable fetus and absence of adequate activity for expulsion. .</IndicationAndUsage>
<Description>Carboprost tromethamine injection, USP, an oxytocic, contains the tromethamine salt of the (15S)-15 methyl analogue of naturally occurring prostaglandin F2α in a solution suitable for intramuscular injection. Carboprost tromethamine is the established name for the active ingredient in carboprost tromethamine injection, USP. Four other chemical names are: : 1 (15S)-15-methyl prostaglandin F2α tromethamine salt , 2 7-(3α,5α-dihydroxy-2β-[(3S)-3-hydroxy-3-methyl-trans-1-octenyl]-1α cyclopentyl]-cis-5-heptenoic acid compound with 2-amino-2-(hydroxymethyl)- 1,3-propanediol , 3 (15S)-9α,11α,15-trihydroxy-15-methylprosta-cis-5, trans-13-dienoic acid tromethamine salt , 4 (15S)-15-methyl PGF2α-THAM .</Description>
</NDC>
<NDC>
<NDCCode>81298-5783-3</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (81298-5783-3) / 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>81298-5783-03</NDC11Code>
<ProductNDC>81298-5783</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Triamcinolone Acetonide</ProprietaryName>
<NonProprietaryName>Triamcinolone Acetonide</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>INTRA-ARTERIAL; INTRAMUSCULAR</RouteName>
<StartMarketingDate>20220502</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213543</ApplicationNumber>
<LabelerName>Long Grove Pharmaceuticals, LLC</LabelerName>
<SubstanceName>TRIAMCINOLONE ACETONIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220502</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Where oral therapy is not feasible, injectable corticosteroid therapy, including triamcinolone acetonide injectable suspension, USP is indicated for intramuscular use as follows:. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, perennial or seasonal allergic rhinitis, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, Diamond-Blackfan anemia, pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous system: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, temporal arteritis, uveitis, and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, polymyositis, and systemic lupus erythematosus.</IndicationAndUsage>
<Description>Triamcinolone acetonide injectable suspension, USP is a synthetic glucocorticoid corticosteroid with anti-inflammatory action. THIS FORMULATION IS SUITABLE FOR INTRAMUSCULAR AND INTRA-ARTICULAR USE ONLY. THIS FORMULATION IS NOT FOR INTRADERMAL INJECTION. Each mL of the sterile aqueous suspension provides 40 mg triamcinolone acetonide, with 0.66% sodium chloride for isotonicity, 0.99% (w/v) benzyl alcohol as a preservative, 0.63% carboxymethylcellulose sodium, and 0.04% polysorbate 80. Sodium hydroxide or hydrochloric acid may be present to adjust pH to 5.0 to 7.5. At the time of manufacture, the air in the container is replaced by nitrogen. The chemical name for triamcinolone acetonide is 9-Fluoro-11β, 16α,17,21-tetrahydroxypregna-1,4-diene- 3,20-dione cyclic 16,17-acetal with acetone. Its structural formula is:. MW 434.50. Triamcinolone acetonide occurs as a white to cream-colored, crystalline powder having not more than a slight odor and is practically insoluble in water and very soluble in alcohol.</Description>
</NDC>
<NDC>
<NDCCode>81298-7050-3</NDCCode>
<PackageDescription>2 BAG in 1 CARTON (81298-7050-3) / 100 mL in 1 BAG (81298-7050-1) </PackageDescription>
<NDC11Code>81298-7050-03</NDC11Code>
<ProductNDC>81298-7050</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Edaravone</ProprietaryName>
<NonProprietaryName>Edaravone</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240513</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218354</ApplicationNumber>
<LabelerName>Long Grove Pharmaceuticals, LLC</LabelerName>
<SubstanceName>EDARAVONE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-12-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240513</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Edaravone injection is indicated for the treatment of amyotrophic lateral sclerosis (ALS).</IndicationAndUsage>
<Description>The active ingredient in edaravone injection is edaravone, which is a member of the substituted 2-pyrazolin-5one class. The chemical name of edaravone is [3-methyl-1-phenyl-2-pyrazolin-5-one]. The molecular formula is C10H10N2O and the molecular weight is 174.20. The chemical structure is:. Edaravone is a white crystalline powder with a melting point of 129.7°C. It is freely soluble in acetic acid, methanol, or ethanol and slightly soluble in water or diethyl ether. Edaravone injection is a clear, colorless liquid provided as a sterile solution. Edaravone injection is supplied for intravenous infusion in a polypropylene bag containing 30 mg edaravone in 100 mL isotonic, sterile, aqueous solution, which is further overwrapped with silicon oxide-coated polyester film secondary packaging. The overwrapped package also contains an oxygen absorber and oxygen indicator to minimize oxidation. Each bag contains the following inactive ingredients: L-cysteine hydrochloride hydrate (10 mg), sodium bisulfite (20 mg). Sodium chloride is added for isotonicity and phosphoric acid and sodium hydroxide are added to adjust to pH 4.</Description>
</NDC>
<NDC>
<NDCCode>81298-7500-1</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (81298-7500-1) / 20 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>81298-7500-01</NDC11Code>
<ProductNDC>81298-7500</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methadone Hydrochloride</ProprietaryName>
<NonProprietaryName>Methadone Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250628</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208306</ApplicationNumber>
<LabelerName>Long Grove Pharmaceuticals, LLC</LabelerName>
<SubstanceName>METHADONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/20mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-08-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250628</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methadone Hydrochloride Injection is indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids.Limitations of UseBecause of the risks of addiction, abuse, and misuse overdose, and death, which can occur at any dosage or duration (see WARNINGS), and persist over the course of therapy, reserve opioid analgesics, including Methadone Hydrochloride Injection, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.Methadone Hydrochloride Injection is not indicated as an as-needed (prn) analgesic. For use in temporary treatment of opioid dependence in patients unable to take oral medication.Limitations of UseInjectable methadone products are not approved for the outpatient treatment of opioid dependence. In this patient population, parenteral methadone is to be used only for patients unable to take oral medication, such as hospitalized patients.</IndicationAndUsage>
<Description>Methadone Hydrochloride Injection USP, 10 mg/mL is an opioid analgesic for parenteral use (intravenous, intramuscular or subcutaneous use). Methadone Hydrochloride Injection USP, 10 mg/mL contains methadone hydrochloride as the active pharmaceutical ingredient. Methadone hydrochloride is a white, crystalline material that is water-soluble. Methadone hydrochloride is chemically described as 6-(dimethylamino)-4,4-diphenyl-3-hepatanone hydrochloride. Its molecular formula is C21H27NOHCl and it has a molecular weight of 345.91. Methadone hydrochloride has a melting point of 235°C, and a pKa of 8.25 in water at 20°C. Its octanol/water partition coefficient at pH 7.4 is 117. A solution (1:100) in water has a pH between 4.5 and 6.5. Methadone hydrochloride has the following structural formula:. Methadone Hydrochloride Injection is a sterile injectable solution available in 20 mL multiple-dose vials. Each mL of the Methadone Hydrochloride Injection contains: 10 mg of methadone hydrochloride (equivalent to 8.95 mg of methadone free base), 5 mg of chlorobutanol, as a preservative, 9 mg of sodium chloride, as tonicity agent, and hydrochloric acid and sodium hydroxide as pH adjusters, in water for injection. The pH of the sterile injectable solution is between 3.0 to 6.5.</Description>
</NDC>
<NDC>
<NDCCode>81298-7620-3</NDCCode>
<PackageDescription>20 VIAL in 1 CARTON (81298-7620-3) / 50 mL in 1 VIAL (81298-7620-1) </PackageDescription>
<NDC11Code>81298-7620-03</NDC11Code>
<ProductNDC>81298-7620</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Bicarbonate</ProprietaryName>
<NonProprietaryName>Sodium Bicarbonate Injection,</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216042</ApplicationNumber>
<LabelerName>Long Grove Pharmaceuticals, LLC</LabelerName>
<SubstanceName>SODIUM BICARBONATE</SubstanceName>
<StrengthNumber>84</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Alkalinizing Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240930</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sodium Bicarbonate Injection, USP is indicated in the treatment of metabolic acidosis which may occur in severe renal disease, uncontrolled diabetes, circulatory insufficiency due to shock or severe dehydration, extracorporeal circulation of blood, cardiac arrest and severe primary lactic acidosis. Sodium bicarbonate is further indicated in the treatment of certain drug intoxications, including barbiturates (where dissociation of the barbiturate-protein complex is desired), in poisoning by salicylates or methyl alcohol and in hemolytic reactions requiring alkalinization of the urine to diminish nephrotoxicity of hemoglobin and its breakdown products. Sodium bicarbonate also is indicated in severe diarrhea which is often accompanied by a significant loss of bicarbonate. Treatment of metabolic acidosis should, if possible, be superimposed on measures designed to control the basic cause of the acidosis - e.g., insulin in uncomplicated diabetes, blood volume restoration in shock. But since an appreciable time interval may elapse before all of the ancillary effects are brought about, bicarbonate therapy is indicated to minimize risks inherent to the acidosis itself. Vigorous bicarbonate therapy is required in any form of metabolic acidosis where a rapid increase in plasma total C02 content is crucial - e.g., cardiac arrest, circulatory insufficiency due to shock or severe dehydration, and in severe primary lactic acidosis or severe diabetic acidosis.</IndicationAndUsage>
<Description>Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHC03) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solution is offered in concentration of 8.4%. See table in HOW SUPPLIED section for contents and characteristics. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only for use as a single-dose injection, the approximate pH of the solution is 8. When smaller doses are required, the unused portion should be discarded. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na+ and HCO3-. Sodium Bicarbonate, USP is chemically designated NaHCO3, a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H2O.</Description>
</NDC>
<NDC>
<NDCCode>81298-8110-1</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (81298-8110-1) / 25 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>81298-8110-01</NDC11Code>
<ProductNDC>81298-8110</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclophosphamide</ProprietaryName>
<NonProprietaryName>Cyclophosphamide</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20220101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215089</ApplicationNumber>
<LabelerName>Long Grove Pharmaceuticals, LLC</LabelerName>
<SubstanceName>CYCLOPHOSPHAMIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/25mL</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA], Alkylating Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclophosphamide is an alkylating drug indicated for treatment of: 1 Malignant Diseases: malignant lymphomas: Hodgkin’s disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt’s lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma ( 1.1) , 2 Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy ( 1.2) .</IndicationAndUsage>
<Description>Cyclophosphamide is a synthetic antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide is a white crystalline powder with the molecular formula C 7H 15Cl 2N 2O 2PH 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white powder available as 500 mg, 1 g, and 2 g strength vials, ready to be reconstituted into solutions for intravenous use. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide, 2 1 g vial contains 1069.0 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide, 3 2 g vial contains 2138.0 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide.</Description>
</NDC>
<NDC>
<NDCCode>81298-8112-1</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (81298-8112-1) / 50 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>81298-8112-01</NDC11Code>
<ProductNDC>81298-8112</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclophosphamide</ProprietaryName>
<NonProprietaryName>Cyclophosphamide</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20210101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215089</ApplicationNumber>
<LabelerName>Long Grove Pharmaceuticals, LLC</LabelerName>
<SubstanceName>CYCLOPHOSPHAMIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/50mL</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA], Alkylating Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclophosphamide is an alkylating drug indicated for treatment of: 1 Malignant Diseases: malignant lymphomas: Hodgkin’s disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt’s lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma ( 1.1) , 2 Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy ( 1.2) .</IndicationAndUsage>
<Description>Cyclophosphamide is a synthetic antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide is a white crystalline powder with the molecular formula C 7H 15Cl 2N 2O 2PH 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white powder available as 500 mg, 1 g, and 2 g strength vials, ready to be reconstituted into solutions for intravenous use. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide, 2 1 g vial contains 1069.0 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide, 3 2 g vial contains 2138.0 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide.</Description>
</NDC>
<NDC>
<NDCCode>81298-8114-1</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (81298-8114-1) / 100 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>81298-8114-01</NDC11Code>
<ProductNDC>81298-8114</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclophosphamide</ProprietaryName>
<NonProprietaryName>Cyclophosphamide</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20220101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215089</ApplicationNumber>
<LabelerName>Long Grove Pharmaceuticals, LLC</LabelerName>
<SubstanceName>CYCLOPHOSPHAMIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA], Alkylating Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclophosphamide is an alkylating drug indicated for treatment of: 1 Malignant Diseases: malignant lymphomas: Hodgkin’s disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt’s lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma ( 1.1) , 2 Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy ( 1.2) .</IndicationAndUsage>
<Description>Cyclophosphamide is a synthetic antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide is a white crystalline powder with the molecular formula C 7H 15Cl 2N 2O 2PH 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white powder available as 500 mg, 1 g, and 2 g strength vials, ready to be reconstituted into solutions for intravenous use. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide, 2 1 g vial contains 1069.0 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide, 3 2 g vial contains 2138.0 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide.</Description>
</NDC>
</NDCList>