RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>81522-000-39</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (81522-000-39)  &gt; 30 TABLET, FILM COATED in 1 BOTTLE</PackageDescription>
    <NDC11Code>81522-0000-39</NDC11Code>
    <ProductNDC>81522-000</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Caring Mill All Day Allergy</ProprietaryName>
    <NonProprietaryName>Cetirizine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210825</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078336</ApplicationNumber>
    <LabelerName>FSA Store Inc.</LabelerName>
    <SubstanceName>CETIRIZINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2023-10-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210830</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>81522-000-95</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (81522-000-95)  / 45 TABLET, FILM COATED in 1 BOTTLE</PackageDescription>
    <NDC11Code>81522-0000-95</NDC11Code>
    <ProductNDC>81522-000</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Caring Mill All Day Allergy</ProprietaryName>
    <NonProprietaryName>Cetirizine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210825</StartMarketingDate>
    <EndMarketingDate>20240331</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078336</ApplicationNumber>
    <LabelerName>FSA Store Inc.</LabelerName>
    <SubstanceName>CETIRIZINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-04-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20210825</StartMarketingDatePackage>
    <EndMarketingDatePackage>20240331</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose, 2 sneezing, 3 itchy, watery eyes, 4 itching of the nose or throat.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>78852-000-39</NDCCode>
    <PackageDescription>6000 mL in 1 BOTTLE, PLASTIC (78852-000-39) </PackageDescription>
    <NDC11Code>78852-0000-39</NDC11Code>
    <ProductNDC>78852-000</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Si Master Hand Sanitizer</ProprietaryName>
    <NonProprietaryName>Ethyl Alcohol</NonProprietaryName>
    <DosageFormName>GEL</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20200615</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part333A</ApplicationNumber>
    <LabelerName>Ningbo Youcheng Trade Developing Co., Ltd.</LabelerName>
    <SubstanceName>ALCOHOL</SubstanceName>
    <StrengthNumber>75</StrengthNumber>
    <StrengthUnit>mL/100mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2022-01-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200616</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>hand sanitizer to help decrease bacteria on the skin that may cause disease.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>84338-000-19</NDCCode>
    <PackageDescription>113.39 mg in 1 TUBE (84338-000-19) </PackageDescription>
    <NDC11Code>84338-0000-19</NDC11Code>
    <ProductNDC>84338-000</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Pain Relieving Cream</ProprietaryName>
    <NonProprietaryName>Camphor And Menthol</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20041202</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M017</ApplicationNumber>
    <LabelerName>PAIN WIZARD LIMITED LIABILITY COMPANY</LabelerName>
    <SubstanceName>CAMPHOR (SYNTHETIC); MENTHOL</SubstanceName>
    <StrengthNumber>3; 3</StrengthNumber>
    <StrengthUnit>mg/100mg; mg/100mg</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2025-07-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20041202</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Temporarily relieves the minor aches and pains of muscles and joints associated with: 1 simple backache, 2 arthritis, 3 sprains, 4 bruises, 5 strains.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>0078-1217-61</NDCCode>
    <PackageDescription>1 VIAL, GLASS in 1 PACKAGE (0078-1217-61)  / 7.5 mL in 1 VIAL, GLASS</PackageDescription>
    <NDC11Code>00078-1217-61</NDC11Code>
    <ProductNDC>0078-1217</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pluvicto</ProprietaryName>
    <NonProprietaryName>Lutetium Lu 177 Vipivotide Tetraxetan</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20220323</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA215833</ApplicationNumber>
    <LabelerName>Novartis Pharmaceuticals Corporation</LabelerName>
    <SubstanceName>LUTETIUM LU-177 VIPIVOTIDE TETRAXETAN</SubstanceName>
    <StrengthNumber>27</StrengthNumber>
    <StrengthUnit>mCi/mL</StrengthUnit>
    <Pharm_Classes>Radioligand Activity [MoA], Radioligand Therapeutic Agent [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260115</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>PLUVICTO is a radioligand therapeutic agent indicated. Metastatic Androgen Pathway Modulation-Naïve or -Sensitive (mAPMN/S) Prostate Cancer: 1 in combination with androgen receptor pathway inhibitor (ARPI) therapy for the treatment of adult patients with prostate-specific membrane antigen (PSMA)-positive metastatic androgen pathway modulation-naïve or -sensitive (mAPMN/S) prostate cancer. (1.1).</IndicationAndUsage>
    <Description>PLUVICTO (lutetium Lu 177 vipivotide tetraxetan) is a radioligand therapeutic agent. Lutetium Lu 177 vipivotide tetraxetan is a PSMA-binding ligand bound to a DOTA chelator radiolabeled with lutetium-177. The chemical name is 2-[4-[2-[[4-[[(2S)-1-[[(5S)-5-carboxy-5-[[(1S)-1,3-dicarboxy propyl]carbamoylamino]pentyl]amino]-3-naphthalen-2-yl-1-oxopropan-2-yl]carbamoyl]cyclohexyl]methylamino]-2-oxoethyl]-4,7,10-tris(carboxylatomethyl)-1,4,7,10-tetrazacyclododec-1-yl]acetate; lutetium-177(3+). The molecular mass is 1216.06 g/mol and the molecular formula is C49H68177LuN9O16. The chemical structure for lutetium Lu 177 vipivotide tetraxetan is shown below. PLUVICTO Injection containing 1,000 MBq/mL (27 mCi/mL) of lutetium Lu 177 vipivotide tetraxetan at calibration time is supplied as a sterile, clear, colorless to slightly yellow solution for intravenous use containing 7.4 GBq (200 mCi) ± 10% of lutetium Lu 177 vipivotide tetraxetan at administration time. Each single-dose vial contains acetic acid (0.30 mg/mL), sodium acetate (0.41 mg/mL), gentisic acid (0.39 mg/mL), sodium ascorbate (50.0 mg/mL), pentetic acid (0.10 mg/mL), and water for injection (q.s. to 1 mL). The pH range of the solution is 4.5 to 7.0.</Description>
  </NDC>
  <NDC>
    <NDCCode>0143-9180-25</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (0143-9180-25)  / 10 mL in 1 VIAL (0143-9180-01) </PackageDescription>
    <NDC11Code>00143-9180-25</NDC11Code>
    <ProductNDC>0143-9180</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Calcium Gluconate</ProprietaryName>
    <NonProprietaryName>Calcium Gluconate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20231016</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213071</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
    <StrengthNumber>98</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-10-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231016</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Calcium Gluconate Injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of Calcium Gluconate Injection for long term use has not been established.</IndicationAndUsage>
    <Description>Calcium Gluconate Injection, USP is a clear, colorless to slightly yellow, sterile, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. Calcium Gluconate is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14 H2O. Molecular weight: 448.39. Solubility in water: 3.5 g/100 mL at 25°C. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) in a single-dose vial. Each mL of Calcium Gluconate Injection, USP contains 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and water for injection, q.s. It contains no antimicrobial agent. Each mL of Calcium Gluconate Injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium.</Description>
  </NDC>
  <NDC>
    <NDCCode>0143-9184-25</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (0143-9184-25)  / 50 mL in 1 VIAL (0143-9184-01) </PackageDescription>
    <NDC11Code>00143-9184-25</NDC11Code>
    <ProductNDC>0143-9184</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Calcium Gluconate</ProprietaryName>
    <NonProprietaryName>Calcium Gluconate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20231124</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213071</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
    <StrengthNumber>98</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-11-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231124</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Calcium Gluconate Injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use The safety of Calcium Gluconate Injection for long term use has not been established.</IndicationAndUsage>
    <Description>Calcium Gluconate Injection, USP is a clear, colorless to slightly yellow, sterile, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. Calcium Gluconate is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14 H2O Molecular weight: 448.39 Solubility in water: 3.5 g/100 mL at 25°C Calcium Gluconate Injection, USP is available as 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial. Each mL of Calcium Gluconate Injection, USP contains 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and water for injection, q.s. It contains no antimicrobial agent. Each mL of Calcium Gluconate Injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium.</Description>
  </NDC>
  <NDC>
    <NDCCode>0143-9185-20</NDCCode>
    <PackageDescription>20 VIAL in 1 CARTON (0143-9185-20)  / 100 mL in 1 VIAL (0143-9185-01) </PackageDescription>
    <NDC11Code>00143-9185-20</NDC11Code>
    <ProductNDC>0143-9185</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Calcium Gluconate</ProprietaryName>
    <NonProprietaryName>Calcium Gluconate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20240630</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213071</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
    <StrengthNumber>98</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-07-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240630</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Calcium Gluconate Injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use The safety of Calcium Gluconate Injection for long term use has not been established.</IndicationAndUsage>
    <Description>Calcium Gluconate Injection, USP is a clear, colorless to slightly yellow, sterile, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. Calcium Gluconate is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14 H2O Molecular weight: 448.39 Solubility in water: 3.5 g/100 mL at 25°C Calcium Gluconate Injection, USP is available as 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of Calcium Gluconate Injection, USP contains 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and water for injection, q.s. It contains no antimicrobial agent. Each mL of Calcium Gluconate Injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium.</Description>
  </NDC>
  <NDC>
    <NDCCode>0264-5600-52</NDCCode>
    <PackageDescription>24 CONTAINER in 1 CASE (0264-5600-52)  / 100 mL in 1 CONTAINER</PackageDescription>
    <NDC11Code>00264-5600-52</NDC11Code>
    <ProductNDC>0264-5600</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Calcium Gluconate</ProprietaryName>
    <NonProprietaryName>Calcium Gluconate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20231102</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216541</ApplicationNumber>
    <LabelerName>B. Braun Medical Inc.</LabelerName>
    <SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
    <StrengthNumber>98</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-11-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231102</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Calcium Gluconate Injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of Calcium Gluconate Injection for long term use has not been established.</IndicationAndUsage>
    <Description>Calcium Gluconate Injection 10,000 mg per 100 mL (100 mg per mL) Pharmacy Bulk Package is a sterile, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use after dilution. Calcium Gluconate is calcium D-gluconate (1:2) monohydrate. The structural formula is:. Molecular formula: C12H 22CaO14 H2O. Molecular weight:  448.39. Solubility in water: 3.5 g/100 mL at 25°C. Calcium Gluconate Injection is available as 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of Calcium Gluconate Injection contains 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of Calcium Gluconate Injection contains 9.3 mg (0.465 mEq) of elemental calcium. Not made with natural rubber latex, PVC or DEHP.</Description>
  </NDC>
  <NDC>
    <NDCCode>0404-9764-10</NDCCode>
    <PackageDescription>1 VIAL in 1 BAG (0404-9764-10)  / 10 mL in 1 VIAL</PackageDescription>
    <NDC11Code>00404-9764-10</NDC11Code>
    <ProductNDC>0404-9764</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Calcium Gluconate</ProprietaryName>
    <NonProprietaryName>Calcium Gluconate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20251223</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213071</ApplicationNumber>
    <LabelerName>Henry Schein, Inc.</LabelerName>
    <SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
    <StrengthNumber>98</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251223</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Calcium Gluconate Injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of Calcium Gluconate Injection for long term use has not been established.</IndicationAndUsage>
    <Description>Calcium Gluconate Injection, USP is a clear, colorless to slightly yellow, sterile, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. Calcium Gluconate is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14 H2O. Molecular weight: 448.39. Solubility in water: 3.5 g/100 mL at 25°C. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) in a single-dose vial. Each mL of Calcium Gluconate Injection, USP contains 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and water for injection, q.s. It contains no antimicrobial agent. Each mL of Calcium Gluconate Injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium.</Description>
  </NDC>
  <NDC>
    <NDCCode>0517-0031-25</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (0517-0031-25)  / 1 mL in 1 VIAL, MULTI-DOSE (0517-0031-01) </PackageDescription>
    <NDC11Code>00517-0031-25</NDC11Code>
    <ProductNDC>0517-0031</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cyanocobalamin</ProprietaryName>
    <NonProprietaryName>Cyanocobalamin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19900930</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA080737</ApplicationNumber>
    <LabelerName>American Regent, Inc.</LabelerName>
    <SubstanceName>CYANOCOBALAMIN</SubstanceName>
    <StrengthNumber>1000</StrengthNumber>
    <StrengthUnit>ug/mL</StrengthUnit>
    <Pharm_Classes>Vitamin B 12 [CS], Vitamin B12 [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-11-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19900930</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cyanocobalamin is indicated for vitamin B12 deficiencies due to malabsorption which may be associated with the following conditions: 1  Addisonian (pernicious) anemia, 2  Gastrointestinal pathology, dysfunction, or surgery, including gluten enteropathy or sprue, small bowel bacteria overgrowth, total or partial gastrectomy, 3  Fish tapeworm infestation, 4  Malignancy of pancreas or bowel, 5  Folic acid deficiency.</IndicationAndUsage>
    <Description>Cyanocobalamin Injection, USP is a sterile solution of cyanocobalamin for intramuscular or subcutaneous injection. Each mL contains 1,000 mcg cyanocobalamin. Each vial also contains Sodium Chloride, 0.9%. Benzyl Alcohol, 1.5%, is present as a preservative. Hydrochloric acid and/or sodium hydroxide may have been added during manufacture to adjust the pH (range 4.5-7.0). Cyanocobalamin appears as dark red crystals or as an amorphous or crystalline red powder. It is very hygroscopic in the anhydrous form, and sparingly soluble in water (1:80). It is stable to autoclaving for short periods at 121°C. The vitamin B12 coenzymes are very unstable in light. The chemical name is 5,6-dimethyl-benzimidazolyl cyanocobamide; the molecular formula is C63H88CoN14O14P. The cobalt content is 4.34%. The molecular weight is 1355.39. The structural formula is represented below.</Description>
  </NDC>
  <NDC>
    <NDCCode>0517-0032-25</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (0517-0032-25)  / 10 mL in 1 VIAL, MULTI-DOSE (0517-0032-01) </PackageDescription>
    <NDC11Code>00517-0032-25</NDC11Code>
    <ProductNDC>0517-0032</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cyanocobalamin</ProprietaryName>
    <NonProprietaryName>Cyanocobalamin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19961107</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA080737</ApplicationNumber>
    <LabelerName>American Regent, Inc.</LabelerName>
    <SubstanceName>CYANOCOBALAMIN</SubstanceName>
    <StrengthNumber>1000</StrengthNumber>
    <StrengthUnit>ug/mL</StrengthUnit>
    <Pharm_Classes>Vitamin B 12 [CS], Vitamin B12 [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-11-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19961107</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cyanocobalamin is indicated for vitamin B12 deficiencies due to malabsorption which may be associated with the following conditions: 1  Addisonian (pernicious) anemia, 2  Gastrointestinal pathology, dysfunction, or surgery, including gluten enteropathy or sprue, small bowel bacteria overgrowth, total or partial gastrectomy, 3  Fish tapeworm infestation, 4  Malignancy of pancreas or bowel, 5  Folic acid deficiency.</IndicationAndUsage>
    <Description>Cyanocobalamin Injection, USP is a sterile solution of cyanocobalamin for intramuscular or subcutaneous injection. Each mL contains 1,000 mcg cyanocobalamin. Each vial also contains Sodium Chloride, 0.9%. Benzyl Alcohol, 1.5%, is present as a preservative. Hydrochloric acid and/or sodium hydroxide may have been added during manufacture to adjust the pH (range 4.5-7.0). Cyanocobalamin appears as dark red crystals or as an amorphous or crystalline red powder. It is very hygroscopic in the anhydrous form, and sparingly soluble in water (1:80). It is stable to autoclaving for short periods at 121°C. The vitamin B12 coenzymes are very unstable in light. The chemical name is 5,6-dimethyl-benzimidazolyl cyanocobamide; the molecular formula is C63H88CoN14O14P. The cobalt content is 4.34%. The molecular weight is 1355.39. The structural formula is represented below.</Description>
  </NDC>
  <NDC>
    <NDCCode>0517-0130-01</NDCCode>
    <PackageDescription>1 VIAL, MULTI-DOSE in 1 BOX (0517-0130-01)  / 30 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
    <NDC11Code>00517-0130-01</NDC11Code>
    <ProductNDC>0517-0130</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cyanocobalamin</ProprietaryName>
    <NonProprietaryName>Cyanocobalamin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20030529</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA080737</ApplicationNumber>
    <LabelerName>American Regent, Inc.</LabelerName>
    <SubstanceName>CYANOCOBALAMIN</SubstanceName>
    <StrengthNumber>1000</StrengthNumber>
    <StrengthUnit>ug/mL</StrengthUnit>
    <Pharm_Classes>Vitamin B 12 [CS], Vitamin B12 [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-11-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20030529</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cyanocobalamin is indicated for vitamin B12 deficiencies due to malabsorption which may be associated with the following conditions: 1  Addisonian (pernicious) anemia, 2  Gastrointestinal pathology, dysfunction, or surgery, including gluten enteropathy or sprue, small bowel bacteria overgrowth, total or partial gastrectomy, 3  Fish tapeworm infestation, 4  Malignancy of pancreas or bowel, 5  Folic acid deficiency.</IndicationAndUsage>
    <Description>Cyanocobalamin Injection, USP is a sterile solution of cyanocobalamin for intramuscular or subcutaneous injection. Each mL contains 1,000 mcg cyanocobalamin. Each vial also contains Sodium Chloride, 0.9%. Benzyl Alcohol, 1.5%, is present as a preservative. Hydrochloric acid and/or sodium hydroxide may have been added during manufacture to adjust the pH (range 4.5-7.0). Cyanocobalamin appears as dark red crystals or as an amorphous or crystalline red powder. It is very hygroscopic in the anhydrous form, and sparingly soluble in water (1:80). It is stable to autoclaving for short periods at 121°C. The vitamin B12 coenzymes are very unstable in light. The chemical name is 5,6-dimethyl-benzimidazolyl cyanocobamide; the molecular formula is C63H88CoN14O14P. The cobalt content is 4.34%. The molecular weight is 1355.39. The structural formula is represented below.</Description>
  </NDC>
  <NDC>
    <NDCCode>0574-4024-39</NDCCode>
    <PackageDescription>24 TUBE in 1 CARTON (0574-4024-39)  / 3.5 g in 1 TUBE</PackageDescription>
    <NDC11Code>00574-4024-39</NDC11Code>
    <ProductNDC>0574-4024</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Erythromycin</ProprietaryName>
    <NonProprietaryName>Erythromycin</NonProprietaryName>
    <DosageFormName>OINTMENT</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>20140508</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062447</ApplicationNumber>
    <LabelerName>Padagis US LLC</LabelerName>
    <SubstanceName>ERYTHROMYCIN</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Macrolide Antimicrobial [EPC], Macrolide [EPC], Macrolides [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-12-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20140508</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>For the treatment of superficial ocular infections involving the conjunctiva and/or cornea caused by organisms susceptible to erythromycin. For prophylaxis of ophthalmia neonatorum due to N. gonorrhoeae or C. trachomatis. The effectiveness of erythromycin in the prevention of ophthalmia caused by penicillinase-producing N. gonorrheae is not established. For infants born to mothers with clinically apparent gonorrhea, intravenous or intramuscular injections of aqueous crystalline penicillin G should be given; a single dose of 50,000 units for term infants or 20,000 units for infants of low birth weight. Topical prophylaxis alone is inadequate for these infants.</IndicationAndUsage>
    <Description>Erythromycin Ophthalmic Ointment belongs to the macrolide group of antibiotics. It is basic and readily forms a salt when combined with an acid. The base, as crystals or powder, is slightly soluble in water, moderately soluble in ether, and readily soluble in alcohol or chloroform. Erythromycin ((3R*,4S*,5S*,6R*,7R*,9R*,11R*,12R*,13S*,14R*)-4-[(2,6-dideoxy-3-C-methyl-3-0-methyl-α-L-ribo-hexopyranosyl)oxy]-14-ethyl-7,12,13-trihydroxy-3,5,7,9,11,13-hexamethyl-6-[[3,4,6-trideoxy-3-(dimethylamino)-ß-D-xylo-hexopyranosyl]oxy]oxacyclotetradecane-2,10-dione) is antibiotic produced from a strain of Streptomyces erythraeus. It has the following structural formula. Each gram contains Erythromycin USP 5 mg in a sterile ophthalmic base of mineral oil and white petrolatum.</Description>
  </NDC>
  <NDC>
    <NDCCode>0615-8498-39</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (0615-8498-39) </PackageDescription>
    <NDC11Code>00615-8498-39</NDC11Code>
    <ProductNDC>0615-8498</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levetiracetam</ProprietaryName>
    <NonProprietaryName>Levetiracetam</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20221007</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214815</ApplicationNumber>
    <LabelerName>NCS HealthCare of KY, LLC dba Vangard Labs</LabelerName>
    <SubstanceName>LEVETIRACETAM</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240110</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Levetiracetam tablets are indicated for the treatment of partial-onset seizures in patients 1 month of age and older (1.1) Levetiracetam tablets are indicated for adjunctive therapy for the treatment of:  Myoclonic seizures in patients 12 years of age and older with juvenile myoclonic epilepsy (1.2)  Primary generalized tonic-clonic seizures in patients 6 years of age and older with idiopathic generalized epilepsy (1.3).</IndicationAndUsage>
    <Description>Levetiracetam, USP is an antiepileptic drug available as 250 mg (white), 500 mg (yellow), 750 mg (orange), and 1,000 mg (white) tablets for oral administration. The chemical name of levetiracetam, USP, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam, USP is chemically unrelated to existing antiepileptic drugs (AEDs).  It has the following structural formula: Levetiracetam, USP is a white to almost white powder. It is very soluble in water, freely soluble in methanol, soluble in acetonitrile, practically insoluble in n-heptane and n- hexane. Levetiracetam tablets, USP contain the labeled amount of levetiracetam. Inactive ingredients: corn starch, colloidal silicon dioxide, croscarmellose sodium, povidone K30, talc, magnesium stearate, microcrystalline cellulose, titanium dioxide, polyethylene glycol, polyvinyl alcohol and additional agents listed below: 500 mg tablets: iron oxide yellow 750 mg tablets:  FD&amp;C yellow No. 6 aluminum lake. FDA approved dissolution method differs from the USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>0615-8499-39</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (0615-8499-39) </PackageDescription>
    <NDC11Code>00615-8499-39</NDC11Code>
    <ProductNDC>0615-8499</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levetiracetam</ProprietaryName>
    <NonProprietaryName>Levetiracetam</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20221007</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214815</ApplicationNumber>
    <LabelerName>NCS HealthCare of KY, LLC dba Vangard Labs</LabelerName>
    <SubstanceName>LEVETIRACETAM</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240111</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Levetiracetam tablets are indicated for the treatment of partial-onset seizures in patients 1 month of age and older (1.1) Levetiracetam tablets are indicated for adjunctive therapy for the treatment of:  Myoclonic seizures in patients 12 years of age and older with juvenile myoclonic epilepsy (1.2)  Primary generalized tonic-clonic seizures in patients 6 years of age and older with idiopathic generalized epilepsy (1.3).</IndicationAndUsage>
    <Description>Levetiracetam, USP is an antiepileptic drug available as 250 mg (white), 500 mg (yellow), 750 mg (orange), and 1,000 mg (white) tablets for oral administration. The chemical name of levetiracetam, USP, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam, USP is chemically unrelated to existing antiepileptic drugs (AEDs).  It has the following structural formula: Levetiracetam, USP is a white to almost white powder. It is very soluble in water, freely soluble in methanol, soluble in acetonitrile, practically insoluble in n-heptane and n- hexane. Levetiracetam tablets, USP contain the labeled amount of levetiracetam. Inactive ingredients: corn starch, colloidal silicon dioxide, croscarmellose sodium, povidone K30, talc, magnesium stearate, microcrystalline cellulose, titanium dioxide, polyethylene glycol, polyvinyl alcohol and additional agents listed below: 500 mg tablets: iron oxide yellow 750 mg tablets:  FD&amp;C yellow No. 6 aluminum lake. FDA approved dissolution method differs from the USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>0615-8500-39</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (0615-8500-39) </PackageDescription>
    <NDC11Code>00615-8500-39</NDC11Code>
    <ProductNDC>0615-8500</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levetiracetam</ProprietaryName>
    <NonProprietaryName>Levetiracetam</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20221007</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214815</ApplicationNumber>
    <LabelerName>NCS HealthCare of KY, LLC dba Vangard Labs</LabelerName>
    <SubstanceName>LEVETIRACETAM</SubstanceName>
    <StrengthNumber>750</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240109</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Levetiracetam tablets are indicated for the treatment of partial-onset seizures in patients 1 month of age and older (1.1) Levetiracetam tablets are indicated for adjunctive therapy for the treatment of:  Myoclonic seizures in patients 12 years of age and older with juvenile myoclonic epilepsy (1.2)  Primary generalized tonic-clonic seizures in patients 6 years of age and older with idiopathic generalized epilepsy (1.3).</IndicationAndUsage>
    <Description>Levetiracetam, USP is an antiepileptic drug available as 250 mg (white), 500 mg (yellow), 750 mg (orange), and 1,000 mg (white) tablets for oral administration. The chemical name of levetiracetam, USP, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam, USP is chemically unrelated to existing antiepileptic drugs (AEDs).  It has the following structural formula: Levetiracetam, USP is a white to almost white powder. It is very soluble in water, freely soluble in methanol, soluble in acetonitrile, practically insoluble in n-heptane and n- hexane. Levetiracetam tablets, USP contain the labeled amount of levetiracetam. Inactive ingredients: corn starch, colloidal silicon dioxide, croscarmellose sodium, povidone K30, talc, magnesium stearate, microcrystalline cellulose, titanium dioxide, polyethylene glycol, polyvinyl alcohol and additional agents listed below: 500 mg tablets: iron oxide yellow 750 mg tablets:  FD&amp;C yellow No. 6 aluminum lake. FDA approved dissolution method differs from the USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>0615-8501-39</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (0615-8501-39) </PackageDescription>
    <NDC11Code>00615-8501-39</NDC11Code>
    <ProductNDC>0615-8501</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levetiracetam</ProprietaryName>
    <NonProprietaryName>Levetiracetam</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20221007</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214815</ApplicationNumber>
    <LabelerName>NCS HealthCare of KY, LLC dba Vangard Labs</LabelerName>
    <SubstanceName>LEVETIRACETAM</SubstanceName>
    <StrengthNumber>1000</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240105</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Levetiracetam tablets are indicated for the treatment of partial-onset seizures in patients 1 month of age and older (1.1) Levetiracetam tablets are indicated for adjunctive therapy for the treatment of:  Myoclonic seizures in patients 12 years of age and older with juvenile myoclonic epilepsy (1.2)  Primary generalized tonic-clonic seizures in patients 6 years of age and older with idiopathic generalized epilepsy (1.3).</IndicationAndUsage>
    <Description>Levetiracetam, USP is an antiepileptic drug available as 250 mg (white), 500 mg (yellow), 750 mg (orange), and 1,000 mg (white) tablets for oral administration. The chemical name of levetiracetam, USP, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam, USP is chemically unrelated to existing antiepileptic drugs (AEDs).  It has the following structural formula: Levetiracetam, USP is a white to almost white powder. It is very soluble in water, freely soluble in methanol, soluble in acetonitrile, practically insoluble in n-heptane and n- hexane. Levetiracetam tablets, USP contain the labeled amount of levetiracetam. Inactive ingredients: corn starch, colloidal silicon dioxide, croscarmellose sodium, povidone K30, talc, magnesium stearate, microcrystalline cellulose, titanium dioxide, polyethylene glycol, polyvinyl alcohol and additional agents listed below: 500 mg tablets: iron oxide yellow 750 mg tablets:  FD&amp;C yellow No. 6 aluminum lake. FDA approved dissolution method differs from the USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>0781-1943-39</NDCCode>
    <PackageDescription>40 TABLET, MULTILAYER, EXTENDED RELEASE in 1 BOTTLE (0781-1943-39) </PackageDescription>
    <NDC11Code>00781-1943-39</NDC11Code>
    <ProductNDC>0781-1943</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Amoxicillin And Clavulanate Potassium</ProprietaryName>
    <NonProprietaryName>Amoxicillin And Clavulanate Potassium</NonProprietaryName>
    <DosageFormName>TABLET, MULTILAYER, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20100421</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090227</ApplicationNumber>
    <LabelerName>Sandoz Inc</LabelerName>
    <SubstanceName>AMOXICILLIN; AMOXICILLIN SODIUM; CLAVULANATE POTASSIUM</SubstanceName>
    <StrengthNumber>562.5; 437.5; 62.5</StrengthNumber>
    <StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillin-class Antibacterial [EPC], Penicillins [CS], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-07-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100421</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Amoxicillin and clavulanate potassium extended-release tablets is indicated for the treatment of infections in adults and pediatric patients weighing greater than or equal to 40 kg who are able to swallow tablets with: 1 community-acquired pneumonia or, 2 acute bacterial sinusitis.</IndicationAndUsage>
    <Description>Amoxicillin and clavulanate potassium extended-release tablets for oral use is an antibacterial combination consisting of the semisynthetic antibacterial amoxicillin (present as amoxicillin trihydrate and amoxicillin sodium) and the β-lactamase inhibitor clavulanate potassium (the potassium salt of clavulanic acid). Amoxicillin is an analog of ampicillin, derived from the basic penicillin nucleus, 6-aminopenicillanic acid. The amoxicillin trihydrate molecular formula is C16H19N3O5S3H2O, and the molecular weight is 419.45. Chemically, amoxicillin trihydrate is (2S,5R,6R)-6-[(R)-(-)-2-Amino-2-(p-hydroxyphenyl)acetamido]-3,3‑ dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate and may be represented structurally as. The amoxicillin sodium molecular formula is C16H18N3NaO5S, and the molecular weight is 387.39. Chemically, amoxicillin sodium is [2 -[2α,5α,6β(S*)]]-6-[[Amino(4‑ hydroxyphenyl)acetyl]amino]-3,3-dimethyl-7-oxo-4-thia-1- azabicyclo[3.2.0]heptane-2‑ carboxylic acid monosodium salt and may be represented structurally as. Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a β‑lactam structurally related to the penicillins and possesses the ability to inactivate a wide variety of β-lactamases by blocking the active sites of these enzymes. Clavulanic acid is particularly active against the clinically important plasmid-mediated β-lactamases frequently responsible for transferred drug resistance to penicillins and cephalosporins. The clavulanate potassium molecular formula is C8H8KNO5, and the molecular weight is 237.25. Chemically, clavulanate potassium is potassium (Z)-(2R,5R)-3-(2-hydroxy ethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate, and may be represented structurally as. Each tablet of amoxicillin and clavulanate potassium extended-release contains 1,000 mg of amoxicillin (437.5 mg as amoxicillin sodium and 562.5 mg as amoxicillin trihydrate), and 62.5 mg of clavulanic acid (equivalent to 74.5 mg of clavulanate potassium). Inactive Ingredients: Anhydrous citric acid, colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, titanium dioxide, and xanthan gum. Each tablet of amoxicillin and clavulanate potassium extended-release tablets contains approximately 12 mg of potassium and 29 mg of sodium. Meets USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>0781-1943-82</NDCCode>
    <PackageDescription>28 TABLET, MULTILAYER, EXTENDED RELEASE in 1 BOTTLE (0781-1943-82) </PackageDescription>
    <NDC11Code>00781-1943-82</NDC11Code>
    <ProductNDC>0781-1943</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Amoxicillin And Clavulanate Potassium</ProprietaryName>
    <NonProprietaryName>Amoxicillin And Clavulanate Potassium</NonProprietaryName>
    <DosageFormName>TABLET, MULTILAYER, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20100421</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090227</ApplicationNumber>
    <LabelerName>Sandoz Inc</LabelerName>
    <SubstanceName>AMOXICILLIN; AMOXICILLIN SODIUM; CLAVULANATE POTASSIUM</SubstanceName>
    <StrengthNumber>562.5; 437.5; 62.5</StrengthNumber>
    <StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillin-class Antibacterial [EPC], Penicillins [CS], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-07-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100421</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Amoxicillin and clavulanate potassium extended-release tablets is indicated for the treatment of infections in adults and pediatric patients weighing greater than or equal to 40 kg who are able to swallow tablets with: 1 community-acquired pneumonia or, 2 acute bacterial sinusitis.</IndicationAndUsage>
    <Description>Amoxicillin and clavulanate potassium extended-release tablets for oral use is an antibacterial combination consisting of the semisynthetic antibacterial amoxicillin (present as amoxicillin trihydrate and amoxicillin sodium) and the β-lactamase inhibitor clavulanate potassium (the potassium salt of clavulanic acid). Amoxicillin is an analog of ampicillin, derived from the basic penicillin nucleus, 6-aminopenicillanic acid. The amoxicillin trihydrate molecular formula is C16H19N3O5S3H2O, and the molecular weight is 419.45. Chemically, amoxicillin trihydrate is (2S,5R,6R)-6-[(R)-(-)-2-Amino-2-(p-hydroxyphenyl)acetamido]-3,3‑ dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate and may be represented structurally as. The amoxicillin sodium molecular formula is C16H18N3NaO5S, and the molecular weight is 387.39. Chemically, amoxicillin sodium is [2 -[2α,5α,6β(S*)]]-6-[[Amino(4‑ hydroxyphenyl)acetyl]amino]-3,3-dimethyl-7-oxo-4-thia-1- azabicyclo[3.2.0]heptane-2‑ carboxylic acid monosodium salt and may be represented structurally as. Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a β‑lactam structurally related to the penicillins and possesses the ability to inactivate a wide variety of β-lactamases by blocking the active sites of these enzymes. Clavulanic acid is particularly active against the clinically important plasmid-mediated β-lactamases frequently responsible for transferred drug resistance to penicillins and cephalosporins. The clavulanate potassium molecular formula is C8H8KNO5, and the molecular weight is 237.25. Chemically, clavulanate potassium is potassium (Z)-(2R,5R)-3-(2-hydroxy ethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate, and may be represented structurally as. Each tablet of amoxicillin and clavulanate potassium extended-release contains 1,000 mg of amoxicillin (437.5 mg as amoxicillin sodium and 562.5 mg as amoxicillin trihydrate), and 62.5 mg of clavulanic acid (equivalent to 74.5 mg of clavulanate potassium). Inactive Ingredients: Anhydrous citric acid, colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, titanium dioxide, and xanthan gum. Each tablet of amoxicillin and clavulanate potassium extended-release tablets contains approximately 12 mg of potassium and 29 mg of sodium. Meets USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>0944-3940-02</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (0944-3940-02)  *  10 mL in 1 BOTTLE (0944-3941-01)  *  10 mL in 1 VIAL, GLASS (64764-516-10) </PackageDescription>
    <NDC11Code>00944-3940-02</NDC11Code>
    <ProductNDC>0944-3940</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Hemofil M</ProprietaryName>
    <NonProprietaryName>Antihemophilic Factor Human</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>19880223</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101448</ApplicationNumber>
    <LabelerName>Takeda Pharmaceuticals America, Inc.</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2025-03-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19880223</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>HEMOFIL M is indicated in hemophilia A (classical hemophilia) for the prevention and control of hemorrhagic episodes. HEMOFIL M is not indicated in von Willebrand's disease.</IndicationAndUsage>
    <Description>HEMOFIL M, Antihemophilic Factor (Human) (AHF), Method M, Monoclonal Purified, is a sterile, nonpyrogenic, dried preparation of antihemophilic factor (Factor VIII, Factor VIII:C, AHF) in concentrated form with a specific activity range of 2 to 22 AHF International Units/mg of total protein. HEMOFIL M contains a maximum of 12.5 mg/mL Albumin, and per AHF International Unit, 0.07 mg polyethylene glycol (3350), 0.39 mg histidine as stabilizing agents, not more than 0.1 mg glycine, 0.1 ng mouse protein, 18 ng organic solvent (tri-n-butyl phosphate) and 50 ng detergent (octoxynol 9). In the absence of the added Albumin (Human), the specific activity is approximately 2,000 AHF International Units/mg of protein [see Clinical Pharmacology]. HEMOFIL M is prepared by the Method M process from pooled human plasma by immunoaffinity chromatography utilizing a murine monoclonal antibody to Factor VIII:C, followed by an ion exchange chromatography step for further purification. Source material may be provided by other US licensed manufacturers. HEMOFIL M also includes an organic solvent (tri-n-butyl phosphate) and detergent (octoxynol 9) virus inactivation step designed to reduce the risk of transmission of hepatitis and other viral diseases. The process further includes a nanofiltration step between immunoaffinity chromatography and ion-exchange chromatography as an additional viral clearance step to further improve the viral safety margin of the final product. Use of an organic solvent (tri-n-butyl phosphate; TNBP) in the manufacture of Antihemophilic Factor (Human) has little or no effect on AHF activity, while lipid enveloped viruses, such as hepatitis B and human immunodeficiency virus (HIV) would be inactivated.1 The nanofiltration step integrated into the manufacture of AHF-M further enhances the safety margin with respect to adventitious viruses. Each bottle of HEMOFIL M is labeled with the AHF activity expressed in International Units (IU) per bottle. This potency assignment is referenced to the World Health Organization International Standard. The purity of HEMOFIL M has been thought to influence the difficulty of producing an accurate potency measurement. Experiments have shown that to achieve accurate activity levels, such a potency assay should be conducted using plastic test tubes and pipets as well as substrate containing normal levels of von Willebrand's Factor. In vitro studies demonstrate that the HEMOFIL M manufacturing process provides for viral reduction. These reductions are achieved through a combination of process chemistry, partitioning and/or inactivation during solvent/detergent treatment, and immunoaffinity chromatography. Introduction of a nanofiltration step with the 0.1µm prefilter and the ASAHI Planova 20N nanofilter provides a virus removal capacity for human immunodeficiency virus, Type 1 (HIV-1), hepatitis A virus (HAV), bovine viral diarrhea virus (BVDV), pseudorabies virus (PRV), mice minute virus (MMV), and human parvovirus B19 (B19V) in the order of four (4) logs or higher. B19V removal data were obtained with a Polymerase Chain Reaction (PCR) assay not correlated to an infectivity assay. Studies for nanofiltration and other process steps, summarized in Table 1, demonstrate virus clearance during the HEMOFIL M manufacturing process using HIV-1; BVDV, a generic model for lipid enveloped RNA viruses, such as hepatitis C virus (HCV); PRV, a model for lipid enveloped DNA viruses, such as hepatitis B virus (HBV); canine parvovirus (CPV), a model for non-lipid enveloped DNA viruses, such as B19V, HAV, and MMV.</Description>
  </NDC>
  <NDC>
    <NDCCode>0944-3942-02</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (0944-3942-02)  *  10 mL in 1 BOTTLE (0944-3943-01)  *  10 mL in 1 VIAL, GLASS (64764-516-10) </PackageDescription>
    <NDC11Code>00944-3942-02</NDC11Code>
    <ProductNDC>0944-3942</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Hemofil M</ProprietaryName>
    <NonProprietaryName>Antihemophilic Factor Human</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>19880223</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101448</ApplicationNumber>
    <LabelerName>Takeda Pharmaceuticals America, Inc.</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2025-03-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19880223</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>HEMOFIL M is indicated in hemophilia A (classical hemophilia) for the prevention and control of hemorrhagic episodes. HEMOFIL M is not indicated in von Willebrand's disease.</IndicationAndUsage>
    <Description>HEMOFIL M, Antihemophilic Factor (Human) (AHF), Method M, Monoclonal Purified, is a sterile, nonpyrogenic, dried preparation of antihemophilic factor (Factor VIII, Factor VIII:C, AHF) in concentrated form with a specific activity range of 2 to 22 AHF International Units/mg of total protein. HEMOFIL M contains a maximum of 12.5 mg/mL Albumin, and per AHF International Unit, 0.07 mg polyethylene glycol (3350), 0.39 mg histidine as stabilizing agents, not more than 0.1 mg glycine, 0.1 ng mouse protein, 18 ng organic solvent (tri-n-butyl phosphate) and 50 ng detergent (octoxynol 9). In the absence of the added Albumin (Human), the specific activity is approximately 2,000 AHF International Units/mg of protein [see Clinical Pharmacology]. HEMOFIL M is prepared by the Method M process from pooled human plasma by immunoaffinity chromatography utilizing a murine monoclonal antibody to Factor VIII:C, followed by an ion exchange chromatography step for further purification. Source material may be provided by other US licensed manufacturers. HEMOFIL M also includes an organic solvent (tri-n-butyl phosphate) and detergent (octoxynol 9) virus inactivation step designed to reduce the risk of transmission of hepatitis and other viral diseases. The process further includes a nanofiltration step between immunoaffinity chromatography and ion-exchange chromatography as an additional viral clearance step to further improve the viral safety margin of the final product. Use of an organic solvent (tri-n-butyl phosphate; TNBP) in the manufacture of Antihemophilic Factor (Human) has little or no effect on AHF activity, while lipid enveloped viruses, such as hepatitis B and human immunodeficiency virus (HIV) would be inactivated.1 The nanofiltration step integrated into the manufacture of AHF-M further enhances the safety margin with respect to adventitious viruses. Each bottle of HEMOFIL M is labeled with the AHF activity expressed in International Units (IU) per bottle. This potency assignment is referenced to the World Health Organization International Standard. The purity of HEMOFIL M has been thought to influence the difficulty of producing an accurate potency measurement. Experiments have shown that to achieve accurate activity levels, such a potency assay should be conducted using plastic test tubes and pipets as well as substrate containing normal levels of von Willebrand's Factor. In vitro studies demonstrate that the HEMOFIL M manufacturing process provides for viral reduction. These reductions are achieved through a combination of process chemistry, partitioning and/or inactivation during solvent/detergent treatment, and immunoaffinity chromatography. Introduction of a nanofiltration step with the 0.1µm prefilter and the ASAHI Planova 20N nanofilter provides a virus removal capacity for human immunodeficiency virus, Type 1 (HIV-1), hepatitis A virus (HAV), bovine viral diarrhea virus (BVDV), pseudorabies virus (PRV), mice minute virus (MMV), and human parvovirus B19 (B19V) in the order of four (4) logs or higher. B19V removal data were obtained with a Polymerase Chain Reaction (PCR) assay not correlated to an infectivity assay. Studies for nanofiltration and other process steps, summarized in Table 1, demonstrate virus clearance during the HEMOFIL M manufacturing process using HIV-1; BVDV, a generic model for lipid enveloped RNA viruses, such as hepatitis C virus (HCV); PRV, a model for lipid enveloped DNA viruses, such as hepatitis B virus (HBV); canine parvovirus (CPV), a model for non-lipid enveloped DNA viruses, such as B19V, HAV, and MMV.</Description>
  </NDC>
  <NDC>
    <NDCCode>0944-3944-02</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (0944-3944-02)  *  10 mL in 1 BOTTLE (0944-3945-01)  *  10 mL in 1 VIAL, GLASS (64764-516-10) </PackageDescription>
    <NDC11Code>00944-3944-02</NDC11Code>
    <ProductNDC>0944-3944</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Hemofil M</ProprietaryName>
    <NonProprietaryName>Antihemophilic Factor Human</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>19880223</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101448</ApplicationNumber>
    <LabelerName>Takeda Pharmaceuticals America, Inc.</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2025-03-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19880223</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>HEMOFIL M is indicated in hemophilia A (classical hemophilia) for the prevention and control of hemorrhagic episodes. HEMOFIL M is not indicated in von Willebrand's disease.</IndicationAndUsage>
    <Description>HEMOFIL M, Antihemophilic Factor (Human) (AHF), Method M, Monoclonal Purified, is a sterile, nonpyrogenic, dried preparation of antihemophilic factor (Factor VIII, Factor VIII:C, AHF) in concentrated form with a specific activity range of 2 to 22 AHF International Units/mg of total protein. HEMOFIL M contains a maximum of 12.5 mg/mL Albumin, and per AHF International Unit, 0.07 mg polyethylene glycol (3350), 0.39 mg histidine as stabilizing agents, not more than 0.1 mg glycine, 0.1 ng mouse protein, 18 ng organic solvent (tri-n-butyl phosphate) and 50 ng detergent (octoxynol 9). In the absence of the added Albumin (Human), the specific activity is approximately 2,000 AHF International Units/mg of protein [see Clinical Pharmacology]. HEMOFIL M is prepared by the Method M process from pooled human plasma by immunoaffinity chromatography utilizing a murine monoclonal antibody to Factor VIII:C, followed by an ion exchange chromatography step for further purification. Source material may be provided by other US licensed manufacturers. HEMOFIL M also includes an organic solvent (tri-n-butyl phosphate) and detergent (octoxynol 9) virus inactivation step designed to reduce the risk of transmission of hepatitis and other viral diseases. The process further includes a nanofiltration step between immunoaffinity chromatography and ion-exchange chromatography as an additional viral clearance step to further improve the viral safety margin of the final product. Use of an organic solvent (tri-n-butyl phosphate; TNBP) in the manufacture of Antihemophilic Factor (Human) has little or no effect on AHF activity, while lipid enveloped viruses, such as hepatitis B and human immunodeficiency virus (HIV) would be inactivated.1 The nanofiltration step integrated into the manufacture of AHF-M further enhances the safety margin with respect to adventitious viruses. Each bottle of HEMOFIL M is labeled with the AHF activity expressed in International Units (IU) per bottle. This potency assignment is referenced to the World Health Organization International Standard. The purity of HEMOFIL M has been thought to influence the difficulty of producing an accurate potency measurement. Experiments have shown that to achieve accurate activity levels, such a potency assay should be conducted using plastic test tubes and pipets as well as substrate containing normal levels of von Willebrand's Factor. In vitro studies demonstrate that the HEMOFIL M manufacturing process provides for viral reduction. These reductions are achieved through a combination of process chemistry, partitioning and/or inactivation during solvent/detergent treatment, and immunoaffinity chromatography. Introduction of a nanofiltration step with the 0.1µm prefilter and the ASAHI Planova 20N nanofilter provides a virus removal capacity for human immunodeficiency virus, Type 1 (HIV-1), hepatitis A virus (HAV), bovine viral diarrhea virus (BVDV), pseudorabies virus (PRV), mice minute virus (MMV), and human parvovirus B19 (B19V) in the order of four (4) logs or higher. B19V removal data were obtained with a Polymerase Chain Reaction (PCR) assay not correlated to an infectivity assay. Studies for nanofiltration and other process steps, summarized in Table 1, demonstrate virus clearance during the HEMOFIL M manufacturing process using HIV-1; BVDV, a generic model for lipid enveloped RNA viruses, such as hepatitis C virus (HCV); PRV, a model for lipid enveloped DNA viruses, such as hepatitis B virus (HBV); canine parvovirus (CPV), a model for non-lipid enveloped DNA viruses, such as B19V, HAV, and MMV.</Description>
  </NDC>
  <NDC>
    <NDCCode>0944-3946-02</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (0944-3946-02)  *  10 mL in 1 BOTTLE (0944-3947-01)  *  10 mL in 1 VIAL, GLASS (64764-516-10) </PackageDescription>
    <NDC11Code>00944-3946-02</NDC11Code>
    <ProductNDC>0944-3946</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Hemofil M</ProprietaryName>
    <NonProprietaryName>Antihemophilic Factor Human</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>19880223</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101448</ApplicationNumber>
    <LabelerName>Takeda Pharmaceuticals America, Inc.</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2025-03-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19880223</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>HEMOFIL M is indicated in hemophilia A (classical hemophilia) for the prevention and control of hemorrhagic episodes. HEMOFIL M is not indicated in von Willebrand's disease.</IndicationAndUsage>
    <Description>HEMOFIL M, Antihemophilic Factor (Human) (AHF), Method M, Monoclonal Purified, is a sterile, nonpyrogenic, dried preparation of antihemophilic factor (Factor VIII, Factor VIII:C, AHF) in concentrated form with a specific activity range of 2 to 22 AHF International Units/mg of total protein. HEMOFIL M contains a maximum of 12.5 mg/mL Albumin, and per AHF International Unit, 0.07 mg polyethylene glycol (3350), 0.39 mg histidine as stabilizing agents, not more than 0.1 mg glycine, 0.1 ng mouse protein, 18 ng organic solvent (tri-n-butyl phosphate) and 50 ng detergent (octoxynol 9). In the absence of the added Albumin (Human), the specific activity is approximately 2,000 AHF International Units/mg of protein [see Clinical Pharmacology]. HEMOFIL M is prepared by the Method M process from pooled human plasma by immunoaffinity chromatography utilizing a murine monoclonal antibody to Factor VIII:C, followed by an ion exchange chromatography step for further purification. Source material may be provided by other US licensed manufacturers. HEMOFIL M also includes an organic solvent (tri-n-butyl phosphate) and detergent (octoxynol 9) virus inactivation step designed to reduce the risk of transmission of hepatitis and other viral diseases. The process further includes a nanofiltration step between immunoaffinity chromatography and ion-exchange chromatography as an additional viral clearance step to further improve the viral safety margin of the final product. Use of an organic solvent (tri-n-butyl phosphate; TNBP) in the manufacture of Antihemophilic Factor (Human) has little or no effect on AHF activity, while lipid enveloped viruses, such as hepatitis B and human immunodeficiency virus (HIV) would be inactivated.1 The nanofiltration step integrated into the manufacture of AHF-M further enhances the safety margin with respect to adventitious viruses. Each bottle of HEMOFIL M is labeled with the AHF activity expressed in International Units (IU) per bottle. This potency assignment is referenced to the World Health Organization International Standard. The purity of HEMOFIL M has been thought to influence the difficulty of producing an accurate potency measurement. Experiments have shown that to achieve accurate activity levels, such a potency assay should be conducted using plastic test tubes and pipets as well as substrate containing normal levels of von Willebrand's Factor. In vitro studies demonstrate that the HEMOFIL M manufacturing process provides for viral reduction. These reductions are achieved through a combination of process chemistry, partitioning and/or inactivation during solvent/detergent treatment, and immunoaffinity chromatography. Introduction of a nanofiltration step with the 0.1µm prefilter and the ASAHI Planova 20N nanofilter provides a virus removal capacity for human immunodeficiency virus, Type 1 (HIV-1), hepatitis A virus (HAV), bovine viral diarrhea virus (BVDV), pseudorabies virus (PRV), mice minute virus (MMV), and human parvovirus B19 (B19V) in the order of four (4) logs or higher. B19V removal data were obtained with a Polymerase Chain Reaction (PCR) assay not correlated to an infectivity assay. Studies for nanofiltration and other process steps, summarized in Table 1, demonstrate virus clearance during the HEMOFIL M manufacturing process using HIV-1; BVDV, a generic model for lipid enveloped RNA viruses, such as hepatitis C virus (HCV); PRV, a model for lipid enveloped DNA viruses, such as hepatitis B virus (HBV); canine parvovirus (CPV), a model for non-lipid enveloped DNA viruses, such as B19V, HAV, and MMV.</Description>
  </NDC>
  <NDC>
    <NDCCode>24338-310-10</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (24338-310-10)  / 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>24338-0310-10</NDC11Code>
    <ProductNDC>24338-310</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ferabright</ProprietaryName>
    <NonProprietaryName>Ferumoxytol</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20251020</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA219868</ApplicationNumber>
    <LabelerName>Azurity Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>FERUMOXYTOL</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Iron [CS], Parenteral Iron Replacement [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-10-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251020</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>FERABRIGHT is indicated for magnetic resonance imaging (MRI) of the brain in adults with known or suspected malignant neoplasms in the brain to visualize lesions with a disrupted blood-brain barrier.</IndicationAndUsage>
    <Description>FERABRIGHT (ferumoxytol injection) is an iron-based contrast agent for intravenous use.  Ferumoxytol is a non-stoichiometric magnetite (superparamagnetic iron oxide) coated with polyglucose sorbitol carboxymethylether. The overall colloidal particle size ranges from 31 nm to 43 nm in diameter. The chemical formula of ferumoxytol is Fe5874O8752-C11719H18682O9933Na414 with an apparent molecular weight of 750 kDa. Each mL contains 30 mg of elemental iron and 30 mg of polyglucose sorbitol carboxymethylether as ferumoxytol, and 44 mg of mannitol. It contains no preservatives.   FERABRIGHT is a sterile, aqueous, black to reddish brown, isotonic colloidal solution with an osmolality of 270 mOsm/kg to 330 mOsm/kg, magnetic susceptibility of 27,250 to 39,000 x 10-6 cgs/g Fe, and a pH of 6 to 8.</Description>
  </NDC>
  <NDC>
    <NDCCode>24338-510-17</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (24338-510-17)  / 17 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>24338-0510-17</NDC11Code>
    <ProductNDC>24338-510</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ferabright</ProprietaryName>
    <NonProprietaryName>Ferumoxytol</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20251020</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA219868</ApplicationNumber>
    <LabelerName>Azurity Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>FERUMOXYTOL</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Iron [CS], Parenteral Iron Replacement [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-10-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251020</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>FERABRIGHT is indicated for magnetic resonance imaging (MRI) of the brain in adults with known or suspected malignant neoplasms in the brain to visualize lesions with a disrupted blood-brain barrier.</IndicationAndUsage>
    <Description>FERABRIGHT (ferumoxytol injection) is an iron-based contrast agent for intravenous use.  Ferumoxytol is a non-stoichiometric magnetite (superparamagnetic iron oxide) coated with polyglucose sorbitol carboxymethylether. The overall colloidal particle size ranges from 31 nm to 43 nm in diameter. The chemical formula of ferumoxytol is Fe5874O8752-C11719H18682O9933Na414 with an apparent molecular weight of 750 kDa. Each mL contains 30 mg of elemental iron and 30 mg of polyglucose sorbitol carboxymethylether as ferumoxytol, and 44 mg of mannitol. It contains no preservatives.   FERABRIGHT is a sterile, aqueous, black to reddish brown, isotonic colloidal solution with an osmolality of 270 mOsm/kg to 330 mOsm/kg, magnetic susceptibility of 27,250 to 39,000 x 10-6 cgs/g Fe, and a pH of 6 to 8.</Description>
  </NDC>
  <NDC>
    <NDCCode>25021-502-01</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (25021-502-01)  / 1 mL in 1 VIAL</PackageDescription>
    <NDC11Code>25021-0502-01</NDC11Code>
    <ProductNDC>25021-502</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cyanocobalamin</ProprietaryName>
    <NonProprietaryName>Cyanocobalamin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20230315</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215107</ApplicationNumber>
    <LabelerName>Sagent Pharmaceuticals</LabelerName>
    <SubstanceName>CYANOCOBALAMIN</SubstanceName>
    <StrengthNumber>1000</StrengthNumber>
    <StrengthUnit>ug/mL</StrengthUnit>
    <Pharm_Classes>Vitamin B 12 [CS], Vitamin B12 [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-03-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230315</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cyanocobalamin Injection is indicated for vitamin B12 deficiencies due to malabsorption which may be associated with the following conditions: : 1  Addisonian (pernicious) anemia , 2  Gastrointestinal pathology, dysfunction, or surgery, including gluten enteropathy or sprue, small bowel bacteria overgrowth, total or partial gastrectomy , 3  Fish tapeworm infestation , 4  Malignancy of pancreas or bowel , 5  Folic acid deficiency .</IndicationAndUsage>
    <Description>Cyanocobalamin Injection, USP is a sterile solution of cyanocobalamin for intramuscular or subcutaneous injection. Each mL contains 1,000 mcg cyanocobalamin. Each vial also contains Sodium Chloride, 0.9%. Benzyl Alcohol, 1.5%, is present as a preservative. Hydrochloric acid and/or sodium hydroxide may have been added during manufacture to adjust the pH (range 4.5 to 7.0). Cyanocobalamin appears as dark red crystals or as an amorphous or crystalline red powder. It is very hygroscopic in the anhydrous form, and sparingly soluble in water (1:80). It is stable to autoclaving for short periods at 121°C. The vitamin B12 coenzymes are very unstable in light. The chemical name is 5,6-dimethyl-benzimidazolyl cyanocobamide; the molecular formula is C63H88CoN14O14P. The cobalt content is 4.34%. The molecular weight is 1355.39. The structural formula is represented below.</Description>
  </NDC>
  <NDC>
    <NDCCode>44567-620-24</NDCCode>
    <PackageDescription>24 POUCH in 1 CARTON (44567-620-24)  / 1 BAG in 1 POUCH (44567-620-01)  / 50 mL in 1 BAG</PackageDescription>
    <NDC11Code>44567-0620-24</NDC11Code>
    <ProductNDC>44567-620</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Calcium Gluconate In Sodium Chloride</ProprietaryName>
    <NonProprietaryName>Calcium Gluconate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20181026</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA210906</ApplicationNumber>
    <LabelerName>WG Critical Care, LLC</LabelerName>
    <SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20181026</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Calcium Gluconate in Sodium Chloride Injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of Calcium Gluconate in Sodium Chloride Injection for long term use has not been established.</IndicationAndUsage>
    <Description>Calcium Gluconate in Sodium Chloride Injection is a sterile, preservative-free, nonpyrogenic solution of calcium gluconate, a form of calcium, for intravenous use. Calcium Gluconate is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14 H2O. Molecular weight: 448.39. Solubility in water: 3.5 g/100 mL at 25°C. Calcium Gluconate in Sodium Chloride Injection is available as 1,000 mg per 50 mL (equivalent to 18.8 mg per mL calcium gluconate anhydrous), 1,000 mg per 100 mL (equivalent to 9.4 mg per mL calcium gluconate anhydrous) or 2,000 mg per 100 mL (equivalent to 18.8 mg per mL calcium gluconate anhydrous) in single-dose bags. Table 3. Calcium Gluconate Formulations.</Description>
  </NDC>
  <NDC>
    <NDCCode>44567-620-84</NDCCode>
    <PackageDescription>24 POUCH in 1 CARTON (44567-620-84)  / 1 BAG in 1 POUCH (44567-620-02)  / 50 mL in 1 BAG</PackageDescription>
    <NDC11Code>44567-0620-84</NDC11Code>
    <ProductNDC>44567-620</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Calcium Gluconate In Sodium Chloride</ProprietaryName>
    <NonProprietaryName>Calcium Gluconate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20181026</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA210906</ApplicationNumber>
    <LabelerName>WG Critical Care, LLC</LabelerName>
    <SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240212</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Calcium Gluconate in Sodium Chloride Injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of Calcium Gluconate in Sodium Chloride Injection for long term use has not been established.</IndicationAndUsage>
    <Description>Calcium Gluconate in Sodium Chloride Injection is a sterile, preservative-free, nonpyrogenic solution of calcium gluconate, a form of calcium, for intravenous use. Calcium Gluconate is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14 H2O. Molecular weight: 448.39. Solubility in water: 3.5 g/100 mL at 25°C. Calcium Gluconate in Sodium Chloride Injection is available as 1,000 mg per 50 mL (equivalent to 18.8 mg per mL calcium gluconate anhydrous), 2,000 mg per 100 mL (equivalent to 18.8 mg per mL calcium gluconate anhydrous) in single-dose bags. Table 3. Calcium Gluconate Formulations.</Description>
  </NDC>
  <NDC>
    <NDCCode>44567-621-24</NDCCode>
    <PackageDescription>24 POUCH in 1 CARTON (44567-621-24)  / 1 BAG in 1 POUCH (44567-621-01)  / 100 mL in 1 BAG</PackageDescription>
    <NDC11Code>44567-0621-24</NDC11Code>
    <ProductNDC>44567-621</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Calcium Gluconate In Sodium Chloride</ProprietaryName>
    <NonProprietaryName>Calcium Gluconate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20181026</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA210906</ApplicationNumber>
    <LabelerName>WG Critical Care, LLC</LabelerName>
    <SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20181026</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Calcium Gluconate in Sodium Chloride Injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia. Limitations of Use. The safety of Calcium Gluconate in Sodium Chloride Injection for long term use has not been established.</IndicationAndUsage>
    <Description>Calcium Gluconate in Sodium Chloride Injection is a sterile, preservative-free, nonpyrogenic solution of calcium gluconate, a form of calcium, for intravenous use. Calcium Gluconate is calcium D-gluconate (1:2) monohydrate. The structural formula is. Molecular formula: C12H22CaO14 H2O. Molecular weight: 448.39. Solubility in water: 3.5 g/100 mL at 25°C. Calcium Gluconate in Sodium Chloride Injection is available as 1,000 mg per 50 mL (equivalent to 18.8 mg per mL calcium gluconate anhydrous), 1,000 mg per 100 mL (equivalent to 9.4 mg per mL calcium gluconate anhydrous) or 2,000 mg per 100 mL (equivalent to 18.8 mg per mL calcium gluconate anhydrous) in single-dose bags. Table 3. Calcium Gluconate Formulations.</Description>
  </NDC>
</NDCList>