{
"NDC": [
{
"NDCCode": "82260-299-10",
"PackageDescription": "1 BOTTLE in 1 CARTON (82260-299-10) / 10 mL in 1 BOTTLE",
"NDC11Code": "82260-0299-10",
"ProductNDC": "82260-299",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Loteprednol Etabonate",
"NonProprietaryName": "Loteprednol Etabonate",
"DosageFormName": "SUSPENSION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20230407",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020583",
"LabelerName": "Bausch & Lomb Americas Inc.",
"SubstanceName": "LOTEPREDNOL ETABONATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230407",
"SamplePackage": "N",
"IndicationAndUsage": "Loteprednol etabonate ophthalmic suspension is indicated for the treatment of steroid-responsive inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe such as allergic conjunctivitis, acne rosacea, superficial punctate keratitis, herpes zoster keratitis, iritis, cyclitis, selected infective conjunctivitides, when the inherent hazard of steroid use is accepted to obtain an advisable diminution in edema and inflammation. Loteprednol etabonate is less effective than prednisolone acetate 1% in two 28-day controlled clinical studies in acute anterior uveitis, where 72% of patients treated with loteprednol etabonate experienced resolution of anterior chamber cells, compared to 87% of patients treated with prednisolone acetate 1%. The incidence of patients with clinically significant increases in IOP (≥10 mmHg) was 1% with loteprednol etabonate and 6% with prednisolone acetate 1%. Loteprednol etabonate should not be used in patients who require a more potent corticosteroid for this indication. Loteprednol etabonate ophthalmic suspension is also indicated for the treatment of post-operative inflammation following ocular surgery.",
"Description": "Loteprednol etabonate ophthalmic suspension contains a sterile, topical anti-inflammatory corticosteroid for ophthalmic use. Loteprednol etabonate is a white to off-white powder. Loteprednol etabonate is represented by the following structural formula. Chemical Name. chloromethyl 17α-[(ethoxycarbonyl)oxy]-11β-hydroxy-3-oxoandrosta-1,4-diene-17β-carboxylate. Each mL contains. Active: Loteprednol Etabonate 5 mg (0.5%). Inactives: Edetate Disodium, Glycerin, Povidone, Purified Water and Tyloxapol. Hydrochloric Acid and/or Sodium Hydroxide may be added to adjust the pH. The suspension is essentially isotonic with a tonicity of 250 to 310 mOsmol/kg. Preservative: Benzalkonium Chloride 0.01%."
},
{
"NDCCode": "82260-299-05",
"PackageDescription": "1 BOTTLE in 1 CARTON (82260-299-05) / 5 mL in 1 BOTTLE",
"NDC11Code": "82260-0299-05",
"ProductNDC": "82260-299",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Loteprednol Etabonate",
"NonProprietaryName": "Loteprednol Etabonate",
"DosageFormName": "SUSPENSION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20230407",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020583",
"LabelerName": "Bausch & Lomb Americas Inc.",
"SubstanceName": "LOTEPREDNOL ETABONATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230407",
"SamplePackage": "N",
"IndicationAndUsage": "Loteprednol etabonate ophthalmic suspension is indicated for the treatment of steroid-responsive inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe such as allergic conjunctivitis, acne rosacea, superficial punctate keratitis, herpes zoster keratitis, iritis, cyclitis, selected infective conjunctivitides, when the inherent hazard of steroid use is accepted to obtain an advisable diminution in edema and inflammation. Loteprednol etabonate is less effective than prednisolone acetate 1% in two 28-day controlled clinical studies in acute anterior uveitis, where 72% of patients treated with loteprednol etabonate experienced resolution of anterior chamber cells, compared to 87% of patients treated with prednisolone acetate 1%. The incidence of patients with clinically significant increases in IOP (≥10 mmHg) was 1% with loteprednol etabonate and 6% with prednisolone acetate 1%. Loteprednol etabonate should not be used in patients who require a more potent corticosteroid for this indication. Loteprednol etabonate ophthalmic suspension is also indicated for the treatment of post-operative inflammation following ocular surgery.",
"Description": "Loteprednol etabonate ophthalmic suspension contains a sterile, topical anti-inflammatory corticosteroid for ophthalmic use. Loteprednol etabonate is a white to off-white powder. Loteprednol etabonate is represented by the following structural formula. Chemical Name. chloromethyl 17α-[(ethoxycarbonyl)oxy]-11β-hydroxy-3-oxoandrosta-1,4-diene-17β-carboxylate. Each mL contains. Active: Loteprednol Etabonate 5 mg (0.5%). Inactives: Edetate Disodium, Glycerin, Povidone, Purified Water and Tyloxapol. Hydrochloric Acid and/or Sodium Hydroxide may be added to adjust the pH. The suspension is essentially isotonic with a tonicity of 250 to 310 mOsmol/kg. Preservative: Benzalkonium Chloride 0.01%."
},
{
"NDCCode": "82260-299-15",
"PackageDescription": "1 BOTTLE in 1 CARTON (82260-299-15) / 15 mL in 1 BOTTLE",
"NDC11Code": "82260-0299-15",
"ProductNDC": "82260-299",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Loteprednol Etabonate",
"NonProprietaryName": "Loteprednol Etabonate",
"DosageFormName": "SUSPENSION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20230407",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020583",
"LabelerName": "Bausch & Lomb Americas Inc.",
"SubstanceName": "LOTEPREDNOL ETABONATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230407",
"SamplePackage": "N",
"IndicationAndUsage": "Loteprednol etabonate ophthalmic suspension is indicated for the treatment of steroid-responsive inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe such as allergic conjunctivitis, acne rosacea, superficial punctate keratitis, herpes zoster keratitis, iritis, cyclitis, selected infective conjunctivitides, when the inherent hazard of steroid use is accepted to obtain an advisable diminution in edema and inflammation. Loteprednol etabonate is less effective than prednisolone acetate 1% in two 28-day controlled clinical studies in acute anterior uveitis, where 72% of patients treated with loteprednol etabonate experienced resolution of anterior chamber cells, compared to 87% of patients treated with prednisolone acetate 1%. The incidence of patients with clinically significant increases in IOP (≥10 mmHg) was 1% with loteprednol etabonate and 6% with prednisolone acetate 1%. Loteprednol etabonate should not be used in patients who require a more potent corticosteroid for this indication. Loteprednol etabonate ophthalmic suspension is also indicated for the treatment of post-operative inflammation following ocular surgery.",
"Description": "Loteprednol etabonate ophthalmic suspension contains a sterile, topical anti-inflammatory corticosteroid for ophthalmic use. Loteprednol etabonate is a white to off-white powder. Loteprednol etabonate is represented by the following structural formula. Chemical Name. chloromethyl 17α-[(ethoxycarbonyl)oxy]-11β-hydroxy-3-oxoandrosta-1,4-diene-17β-carboxylate. Each mL contains. Active: Loteprednol Etabonate 5 mg (0.5%). Inactives: Edetate Disodium, Glycerin, Povidone, Purified Water and Tyloxapol. Hydrochloric Acid and/or Sodium Hydroxide may be added to adjust the pH. The suspension is essentially isotonic with a tonicity of 250 to 310 mOsmol/kg. Preservative: Benzalkonium Chloride 0.01%."
},
{
"NDCCode": "82260-001-01",
"PackageDescription": "10 VIAL in 1 CARTON (82260-001-01) / .4 mL in 1 VIAL",
"NDC11Code": "82260-0001-01",
"ProductNDC": "82260-001",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atropine Sulfate",
"NonProprietaryName": "Atropine Sulfate",
"DosageFormName": "SOLUTION",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20230421",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA213581",
"LabelerName": "Bausch & Lomb Americas Inc.",
"SubstanceName": "ATROPINE SULFATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-02-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230421",
"SamplePackage": "N",
"IndicationAndUsage": "Atropine Sulfate Ophthalmic Solution, USP 1% is indicated for.",
"Description": "Atropine Sulfate Ophthalmic Solution, USP 1% is an aseptically prepared, sterile solution for topical ophthalmic use. The product does not contain an antimicrobial preservative. The active ingredient is represented by the chemical structure. Chemical Name: Benzeneacetic acid, α-(hydroxymethyl)-, 8-methyl-8-azabicyclo[3.2.1.]oct-3-yl ester, endo –(±)-, sulfate (2:1) (salt), monohydrate. Molecular Formula: (C 17H 23NO 3) 2 H 2SO 4 H 2O. Molecular Weight: 694.84 g/mol. Each mL of Atropine Sulfate Ophthalmic Solution, USP 1% contains: Active:atropine sulfate 10 mg equivalent to 8.3 mg of atropine. Inactives:boric acid, hydroxypropyl methylcellulose, hydrochloric acid and/or sodium hydroxide may be added to adjust pH (3.5 to 6.0), and water for injection USP."
},
{
"NDCCode": "82260-102-10",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (82260-102-10) / 10 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "82260-0102-10",
"ProductNDC": "82260-102",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenylephrine Hydrochloride",
"NonProprietaryName": "Phenylephrine Hydrochloride",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20230331",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA203510",
"LabelerName": "Bausch & Lomb Americas Inc.",
"SubstanceName": "PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2023-07-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230331",
"SamplePackage": "N",
"IndicationAndUsage": "Phenylephrine Hydrochloride Ophthalmic Solution, USP 2.5% and 10% is indicated to dilate the pupil.",
"Description": "Phenylephrine Hydrochloride Ophthalmic Solution, USP 2.5% and 10% is a sterile, clear, colorless, topical mydriatic agent for ophthalmic use. The chemical name is (R)-3-hydroxy-α-[(methylamino)methyl]benzenemethanol hydrochloride. Phenylephrine hydrochloride is represented by the following structural formula. Phenylephrine hydrochloride has a molecular weight of 203.67 and an empirical formula of C9H13NO2-HCl. Each mL of Phenylephrine Hydrochloride Ophthalmic Solution, 2.5% contains: ACTIVE: phenylephrine hydrochloride 25 mg (2.5%); INACTIVES: sodium phosphate monobasic, sodium phosphate dibasic; boric acid, water for injection. Hydrochloric acid and/or sodium hydroxide may be added to adjust pH (4.0-7.5). The solution has a tonicity of 500 mOsm/kg; PRESERVATIVE: benzalkonium chloride 0.01%. Each mL of Phenylephrine Hydrochloride Ophthalmic Solution, USP 10% contains: ACTIVE: phenylephrine hydrochloride 100 mg (10%); INACTIVES: sodium phosphate monobasic, sodium phosphate dibasic; water for injection. Hydrochloric acid and/or sodium hydroxide may be added to adjust pH (4.0-7.5). The solution has a tonicity of 1000 mOsm/kg; PRESERVATIVE: benzalkonium chloride 0.01%."
},
{
"NDCCode": "82260-358-10",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (82260-358-10) / 10 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "82260-0358-10",
"ProductNDC": "82260-358",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Loteprednol Etabonate And Tobramycin",
"NonProprietaryName": "Loteprednol Etabonate And Tobramycin",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20260109",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA050804",
"LabelerName": "Bausch & Lomb Americas Inc.",
"SubstanceName": "LOTEPREDNOL ETABONATE; TOBRAMYCIN",
"StrengthNumber": "5; 3",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260109",
"SamplePackage": "N",
"IndicationAndUsage": "Loteprednol Etabonate and Tobramycin Ophthalmic Suspension 0.5%/0.3% is a topical anti-infective and corticosteroid combination for steroid-responsive inflammatory ocular conditions for which a corticosteroid is indicated and where superficial bacterial ocular infection or a risk of bacterial ocular infection exists. Ocular steroids are indicated in inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe such as allergic conjunctivitis, acne rosacea, superficial punctate keratitis, herpes zoster keratitis, iritis, cyclitis, and where the inherent risk of steroid use in certain infective conjunctivitides is accepted to obtain a diminution in edema and inflammation. They are also indicated in chronic anterior uveitis and corneal injury from chemical, radiation or thermal burns, or penetration of foreign bodies. The use of a combination drug with an anti-infective component is indicated where the risk of superficial ocular infection is high or where there is an expectation that potentially dangerous numbers of bacteria will be present in the eye. The particular anti-infective drug in this product (tobramycin) is active against the following common bacterial eye pathogens. Staphylococci, including S. aureusand S. epidermidis(coagulase-positive and coagulase-negative), including penicillin-resistant strains. Streptococci, including some of the Group A-beta-hemolytic species, some nonhemolytic species, and some Streptococcus pneumoniae, Pseudomonas aeruginosa, Escherichia coli, Klebsiella pneumoniae, Enterobacter aerogenes, Proteus mirabilis, Morganella morganii, most Proteus vulgarisstrains, Haemophilus influenzae, and H. aegyptius, Moraxella lacunata, Acinetobacter calcoaceticusand some Neisseriaspecies.",
"Description": "Loteprednol Etabonate and Tobramycin Ophthalmic Suspension is a sterile, multiple dose topical anti-inflammatory corticosteroid and anti-infective combination for ophthalmic use. Both loteprednol etabonate and tobramycin are white to off-white powders. The chemical structures of loteprednol etabonate and tobramycin are shown below. Loteprednol etabonate. Chemical name: chloromethyl 17α-[(ethoxycarbonyl)oxy]-11 β-hydroxy-3-oxoandrosta-1,4-diene-17 β-carboxylate. Tobramycin. Chemical name. O-3-Amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxystreptamine. Each mL contains: Actives: Loteprednol Etabonate 5 mg (0.5%) and Tobramycin 3 mg (0.3%). Inactives: Edetate Disodium, Glycerin, Povidone, Purified Water, Tyloxapol, and Benzalkonium Chloride 0.01% (preservative). Sulfuric Acid and/or Sodium Hydroxide may be added to adjust the pH to 5.5 to 6.2. The suspension is essentially isotonic with a tonicity of 260 to 320 mOsm/kg."
},
{
"NDCCode": "82260-496-05",
"PackageDescription": "6 POUCH in 1 CARTON (82260-496-05) / 10 CONTAINER in 1 POUCH / .3 mL in 1 CONTAINER",
"NDC11Code": "82260-0496-05",
"ProductNDC": "82260-496",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Timolol Maleate",
"NonProprietaryName": "Timolol Maleate",
"DosageFormName": "SOLUTION",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20220217",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA019463",
"LabelerName": "Bausch & Lomb Americas Inc.",
"SubstanceName": "TIMOLOL MALEATE",
"StrengthNumber": "6.8",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220217",
"SamplePackage": "N",
"IndicationAndUsage": "Preservative-free Timolol Maleate Ophthalmic Solution in OCUDOSE is indicated in the treatment of elevated intraocular pressure in patients with ocular hypertension or open-angle glaucoma. Preservative-free Timolol Maleate Ophthalmic Solution in OCUDOSE may be used when a patient is sensitive to the preservative in Timolol Maleate Ophthalmic Solution, benzalkonium chloride, or when use of a preservative-free topical medication is advisable.",
"Description": "Timolol maleate is a non-selective beta-adrenergic receptor blocking agent. Its chemical name is (-)-1-( tert-butylamino)-3-[(4-morpholino-1,2,5-thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of timolol maleate is:. Its molecular formula is C 13H 24N 4O 3SC 4H 4O 4, and its structural formula is:. Timolol maleate has a molecular weight of 432.49. It is a white, odorless, crystalline powder which is soluble in water; sparingly soluble in ethanol; slightly soluble in chloroform; practically insoluble in ether. Timolol maleate is stable at room temperature. Timolol maleate ophthalmic solution is supplied in two formulations: Timolol Maleate Ophthalmic Solution, which contains the preservative benzalkonium chloride; and Timolol Maleate Ophthalmic Solution, the preservative-free formulation. Preservative-free Timolol Maleate Ophthalmic Solution is supplied in OCUDOSE ®, a unit dose container, as a sterile, isotonic, buffered, aqueous solution of timolol maleate. Each mL of Preservative-free Timolol Maleate Ophthalmic Solution in OCUDOSE ®0.5% contains 5 mg of timolol (6.8 mg of timolol maleate). Inactive ingredients: monobasic and dibasic sodium phosphate, sodium hydroxide to adjust pH, and water for injection."
},
{
"NDCCode": "82260-630-10",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (82260-630-10) / 10 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "82260-0630-10",
"ProductNDC": "82260-630",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bepotastine Besilate",
"NonProprietaryName": "Bepotastine Besilate",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20210528",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA022288",
"LabelerName": "Bausch & Lomb Americas Inc.",
"SubstanceName": "BEPOTASTINE BESYLATE",
"StrengthNumber": "15",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Histamine-1 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-08-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210528",
"SamplePackage": "N",
"IndicationAndUsage": "Bepotastine Besilate Ophthalmic Solution, 1.5% is a histamine H 1receptor antagonist indicated for the treatment of itching associated with signs and symptoms of allergic conjunctivitis.",
"Description": "Bepotastine Besilate Ophthalmic Solution, 1.5% is a sterile, topically administered drug for ophthalmic use. Each mL of Bepotastine Besilate Ophthalmic Solution contains 15 mg bepotastine besilate. Bepotastine besilate is designated chemically as (+) -4-[[(S)-p-chloro-alpha -2-pyridylbenzyl]oxy]-1-piperidine butyric acid monobenzenesulfonate. The chemical structure for bepotastine besilate is. Bepotastine besilate is a white to pale yellowish-white crystalline powder. The molecular weight of bepotastine besilate is 547.06 daltons. Bepotastine Besilate Ophthalmic Solution is supplied as a sterile, aqueous 1.5% solution, with an approximate pH of 6.8. The osmolality of Bepotastine Besilate Ophthalmic Solution, 1.5% is approximately 295 mOsm/kg. Each mL of Bepotastine Besilate Ophthalmic Solution, 1.5% contains: 1 Active: bepotastine besilate 15 mg (equivalent to 10.7 mg bepotastine), 2 Inactives: monobasic sodium phosphate dihydrate, sodium chloride, sodium hydroxide to adjust pH, and water for injection, USP, 3 Preservative: benzalkonium chloride 0.005%."
},
{
"NDCCode": "82260-813-10",
"PackageDescription": "1 BOTTLE, DISPENSING in 1 CARTON (82260-813-10) / 10 mL in 1 BOTTLE, DISPENSING",
"NDC11Code": "82260-0813-10",
"ProductNDC": "82260-813",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Timolol Maleate",
"NonProprietaryName": "Timolol Maleate",
"DosageFormName": "SOLUTION",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20200601",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA018086",
"LabelerName": "Bausch & Lomb Americas Inc.",
"SubstanceName": "TIMOLOL MALEATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200601",
"SamplePackage": "N",
"IndicationAndUsage": "Timolol Maleate Ophthalmic Solution is indicated in the treatment of elevated intraocular pressure in patients with ocular hypertension or open-angle glaucoma.",
"Description": "Timolol Maleate Ophthalmic Solution is a non-selective beta-adrenergic receptor blocking agent. Its chemical name is (-)-1-( tert-butylamino)-3-[(4-morpholino-1,2,5-thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of timolol maleate is:. Its molecular formula is C 13H 24N 4O 3SC 4H 4O 4and its structural formula is:. Timolol maleate has a molecular weight of 432.50. It is a white, odorless, crystalline powder which is soluble in water, sparingly soluble in ethanol; slightly soluble in chloroform; practically insoluble in ether. Timolol Maleate Ophthalmic Solution is stable at room temperature. Timolol Maleate Ophthalmic Solution is supplied as a sterile, isotonic, buffered, aqueous solution of timolol maleate in two dosage strengths. Each mL of Timolol Maleate Ophthalmic Solution 0.25% contains 2.5 mg of timolol (3.4 mg of timolol maleate). The pH of the solution is approximately 7, and the osmolality is 260-340 mOsm/kg. Each mL of Timolol Maleate Ophthalmic Solution 0.5% contains 5 mg of timolol (6.8 mg of timolol maleate). Inactive ingredients: monobasic and dibasic sodium phosphate, sodium hydroxide to adjust pH, and purified water. Benzalkonium chloride 0.01% is added as preservative."
},
{
"NDCCode": "24208-299-10",
"PackageDescription": "1 BOTTLE in 1 CARTON (24208-299-10) / 10 mL in 1 BOTTLE",
"NDC11Code": "24208-0299-10",
"ProductNDC": "24208-299",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lotemax",
"NonProprietaryName": "Loteprednol Etabonate",
"DosageFormName": "SUSPENSION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "19980309",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020583",
"LabelerName": "Bausch & Lomb Incorporated",
"SubstanceName": "LOTEPREDNOL ETABONATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2023-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19980903",
"SamplePackage": "N",
"IndicationAndUsage": "LOTEMAX is indicated for the treatment of steroid-responsive inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe such as allergic conjunctivitis, acne rosacea, superficial punctate keratitis, herpes zoster keratitis, iritis, cyclitis, selected infective conjunctivitides, when the inherent hazard of steroid use is accepted to obtain an advisable diminution in edema and inflammation. LOTEMAX is less effective than prednisolone acetate 1% in two 28-day controlled clinical studies in acute anterior uveitis, where 72% of patients treated with LOTEMAX experienced resolution of anterior chamber cells, compared to 87% of patients treated with prednisolone acetate 1%. The incidence of patients with clinically significant increases in IOP (≥10 mmHg) was 1% with LOTEMAX and 6% with prednisolone acetate 1%. LOTEMAX should not be used in patients who require a more potent corticosteroid for this indication. LOTEMAX is also indicated for the treatment of post-operative inflammation following ocular surgery.",
"Description": "LOTEMAX® (loteprednol etabonate ophthalmic suspension) contains a sterile, topical anti-inflammatory corticosteroid for ophthalmic use. Loteprednol etabonate is a white to off-white powder. Loteprednol etabonate is represented by the following structural formula. Chemical Name. chloromethyl 17α-[(ethoxycarbonyl)oxy]-11β-hydroxy-3-oxoandrosta-1,4-diene-17β-carboxylate. Each mL contains. Active: Loteprednol Etabonate 5 mg (0.5%). Inactives: Edetate Disodium, Glycerin, Povidone, Purified Water and Tyloxapol. Hydrochloric Acid and/or Sodium Hydroxide may be added to adjust the pH. The suspension is essentially isotonic with a tonicity of 250 to 310 mOsmol/kg. Preservative: Benzalkonium Chloride 0.01%."
},
{
"NDCCode": "33342-299-12",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (33342-299-12) > 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "33342-0299-12",
"ProductNDC": "33342-299",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eszopiclone",
"NonProprietaryName": "Eszopiclone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150131",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202929",
"LabelerName": "Macleods Pharmaceuticals Limited",
"SubstanceName": "ESZOPICLONE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2022-11-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150131",
"SamplePackage": "N",
"IndicationAndUsage": "Eszopiclone tablets are indicated for the treatment of insomnia. In controlled outpatient and sleep laboratory studies, eszopiclone tablets administered at bedtime decreased sleep latency and improved sleep maintenance. The clinical trials performed in support of efficacy were up to 6 months in duration. The final formal assessments of sleep latency and maintenance were performed at 4 weeks in the 6-week study (adults only), at the end of both 2-week studies (elderly only) and at the end of the 6-month study (adults only).",
"Description": "Eszopiclone, USP is a nonbenzodiazepine hypnotic agent that is a pyrrolopyrazine derivative of the cyclopyrrolone class. The chemical name of eszopiclone is (+)-(5S)-6-(5-chloropyridin-2-yl)-7-oxo-6,7-dihydro-5H-pyrrolo[3,4-b] pyrazin-5-yl 4-methylpiperazine-1-carboxylate. Its molecular weight is 388.81, and its empirical formula is C17H17CIN6O3. Eszopiclone, USP has a single chiral center with an (S)-configuration. It has the following chemical structure. Eszopiclone, USP is a white to light-yellow crystalline solid. Eszopiclone is very slightly soluble in water, slightly soluble in ethanol, and soluble in phosphate buffer (pH 3.2). Eszopiclone, USP is formulated as film-coated tablets for oral administration. Eszopiclone tablets, USP contain 1 mg, 2 mg, or 3 mg eszopiclone, USP and the following inactive ingredients: dibasic calcium phosphate dihydrate, colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide, and triacetin. In addition, both the 1 mg and 3 mg tablets contain FD&C Blue #2."
},
{
"NDCCode": "35356-299-30",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (35356-299-30) > 10 TABLET in 1 BLISTER PACK",
"NDC11Code": "35356-0299-30",
"ProductNDC": "35356-299",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Micardis Hct",
"NonProprietaryName": "Telmisartan And Hydrochlorothiazide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120315",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021162",
"LabelerName": "Lake Erie Medical & Surgical Supply DBA Quality Care Products LLC",
"SubstanceName": "TELMISARTAN; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "80; 12.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC],Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2017-09-26"
},
{
"NDCCode": "51060-299-01",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (51060-299-01) / 10 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "51060-0299-01",
"ProductNDC": "51060-299",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Rainforest Of The Sea Water Foundation Broad Spectrum Spf 15 Sunscreen",
"ProprietaryNameSuffix": "57s Rich Sand",
"NonProprietaryName": "Titanium Dioxide And Zinc Oxide",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20181101",
"EndMarketingDate": "20231231",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "Tarte, Inc.",
"SubstanceName": "TITANIUM DIOXIDE; ZINC OXIDE",
"StrengthNumber": "62.2; 38.3",
"StrengthUnit": "mg/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20181101",
"EndMarketingDatePackage": "20231231",
"SamplePackage": "N"
},
{
"NDCCode": "54575-299-10",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (54575-299-10)",
"NDC11Code": "54575-0299-10",
"ProductNDC": "54575-299",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Guinea Pig Hair And Epithelia",
"NonProprietaryName": "Cavia Porcellus Hair And Cavia Porcellus Skin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19671207",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101376",
"LabelerName": "Allergy Laboratories, Inc.",
"SubstanceName": "CAVIA PORCELLUS HAIR; CAVIA PORCELLUS SKIN",
"StrengthNumber": ".5; .5",
"StrengthUnit": "g/20mL; g/20mL",
"Pharm_Classes": "Non-Standardized Animal Hair Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [CS],Animal Fur [CS],Non-Standardized Animal Skin Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Cells, Epidermal [EXT],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens."
},
{
"NDCCode": "58411-299-10",
"PackageDescription": "1 BOTTLE in 1 CARTON (58411-299-10) > 30 mL in 1 BOTTLE",
"NDC11Code": "58411-0299-10",
"ProductNDC": "58411-299",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Shiseido Sports Bb",
"ProprietaryNameSuffix": "Light",
"NonProprietaryName": "Octinoxate And Titanium Dioxide",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170201",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "SHISEIDO AMERICAS CORPORATION",
"SubstanceName": "OCTINOXATE; TITANIUM DIOXIDE",
"StrengthNumber": "1727; 5288",
"StrengthUnit": "mg/30mL; mg/30mL",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20170201",
"SamplePackage": "N"
},
{
"NDCCode": "60954-299-10",
"PackageDescription": "1 JAR in 1 BOX (60954-299-10) / 10 g in 1 JAR",
"NDC11Code": "60954-0299-10",
"ProductNDC": "60954-299",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Eagle Brand",
"ProprietaryNameSuffix": "Muscular Balm",
"NonProprietaryName": "Menthol, Methyl Salicylate",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20250819",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M017",
"LabelerName": "PT. EAGLE INDO PHARMA",
"SubstanceName": "MENTHOL; METHYL SALICYLATE",
"StrengthNumber": "1.222; 2.466",
"StrengthUnit": "g/10g; g/10g",
"Status": "Deprecated",
"LastUpdate": "2026-04-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250819",
"SamplePackage": "N",
"IndicationAndUsage": "For the temporary relief of minor aches and pains of muscles and joints associated with simple backache arthritis strains bruises sprains."
},
{
"NDCCode": "67091-299-02",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (67091-299-02) / 10 TABLET, COATED in 1 BLISTER PACK",
"NDC11Code": "67091-0299-02",
"ProductNDC": "67091-299",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Mucus Relief Sinus Pressure Pain And Cough",
"NonProprietaryName": "Acetaminophen, Dextromethorphan Hydrobromide, Guaifenesin, And Phenylephrine Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230411",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M012",
"LabelerName": "WINCO FOODS, LLC",
"SubstanceName": "ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE; GUAIFENESIN; PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "325; 10; 200; 5",
"StrengthUnit": "mg/1; mg/1; mg/1; mg/1",
"Pharm_Classes": "Adrenergic alpha1-Agonists [MoA], Decreased Respiratory Secretion Viscosity [PE], Expectorant [EPC], Increased Respiratory Secretions [PE], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA], alpha-1 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-12-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230411",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves: headachenasal congestionminor aches and painssinus congestion and pressurecough. promotes nasal and/or sinus drainage. helps loosen phlegm (mucus) and thin bronchial secretions to rid the bronchial passageways of bothersome mucus and make coughs more productive."
},
{
"NDCCode": "67457-299-10",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 CARTON (67457-299-10) > 10 mL in 1 VIAL, MULTI-DOSE (67457-299-00) ",
"NDC11Code": "67457-0299-10",
"ProductNDC": "67457-299",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Naloxone Hydrochloride",
"NonProprietaryName": "Naloxone Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20160914",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205014",
"LabelerName": "Mylan Institutional LLC",
"SubstanceName": "NALOXONE HYDROCHLORIDE",
"StrengthNumber": ".4",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Opioid Antagonist [EPC], Opioid Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2021-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160914",
"SamplePackage": "N",
"IndicationAndUsage": "Naloxone hydrochloride injection is indicated for the complete or partial reversal of opioid depression, including respiratory depression, induced by natural and synthetic opioids including propoxyphene, methadone, and certain mixed agonist-antagonist analgesics: nalbuphine, pentazocine, butorphanol and cyclazocine. Naloxone hydrochloride injection is also indicated for diagnosis of suspected or known acute opioid overdosage. Naloxone hydrochloride injection may be useful as an adjunctive agent to increase blood pressure in the management of septic shock (see CLINICAL PHARMACOLOGY: Adjunctive Use in Septic Shock).",
"Description": "Naloxone, an opioid antagonist, is a synthetic congener of oxymorphone. In structure it differs from oxymorphone in that the methyl group on the nitrogen atom is replaced by an allyl group. Naloxone hydrochloride, USP is chemically designated 17-Allyl-4,5α-epoxy-3,14-dihydroxymorphinan-6-one hydrochloride (C19H21NO4 HCl), a white to slightly off-white powder soluble in water, in dilute acids, and in strong alkali; slightly soluble in alcohol; practically insoluble in ether and chloroform. It has a molecular weight of 363.84. It has the following structural formula. Naloxone hydrochloride injection is a sterile, nonpyrogenic solution of naloxone hydrochloride in water for injection. Each milliliter (mL) contains 0.4 mg naloxone hydrochloride and sodium chloride to adjust tonicity in water for injection. May contain hydrochloric acid for pH adjustment; pH 4 (3 to 6.5). Naloxone hydrochloride injection may be administered intravenously, intramuscularly, or subcutaneously. The multiple-dose solution contains, in addition, 1.8 mg/mL methylparaben and 0.2 mg/mL propylparaben added as preservatives."
},
{
"NDCCode": "68382-299-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (68382-299-10) ",
"NDC11Code": "68382-0299-10",
"ProductNDC": "68382-299",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Irbesartan",
"NonProprietaryName": "Irbesartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20171208",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079213",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "IRBESARTAN",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20171208",
"SamplePackage": "N",
"IndicationAndUsage": "Irbesartan tablets are an angiotensin II receptor blocker (ARB) indicated for: 1 Treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1), 2 Treatment of diabetic nephropathy in hypertensive patients with type 2 diabetes, an elevated serum creatinine, and proteinuria. (1.2).",
"Description": "Irbesartan is an angiotensin II receptor (AT1 subtype) antagonist. Irbesartan is a non-peptide compound, chemically described as a 2-butyl-3-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro[4.4]non-1-en-4-one. Its molecular formula is C25H28N6O, and the structural formula. Irbesartan, USP is a white to off-white crystalline powder with a molecular weight of 428.5. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan is slightly soluble in alcohol and in methylene chloride, practically insoluble in water. Each irbesartan tablet intended for oral administration contains 75 mg or 150 mg or 300 mg of irbesartan. In addition, each tablet contains the following inactive ingredients: calcium stearate, croscarmellose sodium, lactose monohydrate, microcrystalline cellulose, poloxamer and pregelatinized starch."
},
{
"NDCCode": "68382-299-77",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (68382-299-77) > 10 TABLET in 1 BLISTER PACK (68382-299-30) ",
"NDC11Code": "68382-0299-77",
"ProductNDC": "68382-299",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Irbesartan",
"NonProprietaryName": "Irbesartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20171208",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079213",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "IRBESARTAN",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20171208",
"SamplePackage": "N",
"IndicationAndUsage": "Irbesartan tablets are an angiotensin II receptor blocker (ARB) indicated for: 1 Treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1), 2 Treatment of diabetic nephropathy in hypertensive patients with type 2 diabetes, an elevated serum creatinine, and proteinuria. (1.2).",
"Description": "Irbesartan is an angiotensin II receptor (AT1 subtype) antagonist. Irbesartan is a non-peptide compound, chemically described as a 2-butyl-3-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro[4.4]non-1-en-4-one. Its molecular formula is C25H28N6O, and the structural formula. Irbesartan, USP is a white to off-white crystalline powder with a molecular weight of 428.5. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan is slightly soluble in alcohol and in methylene chloride, practically insoluble in water. Each irbesartan tablet intended for oral administration contains 75 mg or 150 mg or 300 mg of irbesartan. In addition, each tablet contains the following inactive ingredients: calcium stearate, croscarmellose sodium, lactose monohydrate, microcrystalline cellulose, poloxamer and pregelatinized starch."
},
{
"NDCCode": "68682-299-10",
"PackageDescription": "1 BOTTLE in 1 CARTON (68682-299-10) / 10 mL in 1 BOTTLE",
"NDC11Code": "68682-0299-10",
"ProductNDC": "68682-299",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Loteprednol Etabonate",
"NonProprietaryName": "Loteprednol Etabonate",
"DosageFormName": "SUSPENSION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20190701",
"EndMarketingDate": "20260531",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020583",
"LabelerName": "Oceanside Pharmaceuticals",
"SubstanceName": "LOTEPREDNOL ETABONATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20190701",
"EndMarketingDatePackage": "20260531",
"SamplePackage": "N",
"IndicationAndUsage": "Loteprednol etabonate ophthalmic suspension is indicated for the treatment of steroid-responsive inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe such as allergic conjunctivitis, acne rosacea, superficial punctate keratitis, herpes zoster keratitis, iritis, cyclitis, selected infective conjunctivitides, when the inherent hazard of steroid use is accepted to obtain an advisable diminution in edema and inflammation. Loteprednol etabonate is less effective than prednisolone acetate 1% in two 28-day controlled clinical studies in acute anterior uveitis, where 72% of patients treated with loteprednol etabonate experienced resolution of anterior chamber cells, compared to 87% of patients treated with prednisolone acetate 1%. The incidence of patients with clinically significant increases in IOP (≥10 mmHg) was 1% with loteprednol etabonate and 6% with prednisolone acetate 1%. Loteprednol etabonate should not be used in patients who require a more potent corticosteroid for this indication. Loteprednol etabonate ophthalmic suspension is also indicated for the treatment of post-operative inflammation following ocular surgery.",
"Description": "Loteprednol etabonate ophthalmic suspension contains a sterile, topical anti-inflammatory corticosteroid for ophthalmic use. Loteprednol etabonate is a white to off-white powder. Loteprednol etabonate is represented by the following structural formula. C 24H 31ClO 7 Mol. Wt. 466.96. Chemical Name. chloromethyl 17α-[(ethoxycarbonyl)oxy]-11β-hydroxy-3-oxoandrosta-1,4-diene-17β-carboxylate. Each mL contains. ACTIVE: Loteprednol Etabonate 5 mg (0.5%);. INACTIVES: Edetate Disodium, Glycerin, Povidone, Purified Water and Tyloxapol. Hydrochloric Acid and/or Sodium Hydroxide may be added to adjust the pH. The suspension is essentially isotonic with a tonicity of 250 to 310 mOsmol/kg. PRESERVATIVE ADDED: Benzalkonium Chloride 0.01%."
},
{
"NDCCode": "71919-299-10",
"PackageDescription": "100 mL in 1 BOTTLE, GLASS (71919-299-10) ",
"NDC11Code": "71919-0299-10",
"ProductNDC": "71919-299",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Formica Rufa",
"NonProprietaryName": "Formica Rufa",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20100203",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "FORMICA RUFA",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/mL",
"Status": "Deprecated",
"LastUpdate": "2022-03-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20100203",
"SamplePackage": "N"
},
{
"NDCCode": "72189-299-10",
"PackageDescription": "10 TABLET in 1 BOTTLE (72189-299-10) ",
"NDC11Code": "72189-0299-10",
"ProductNDC": "72189-299",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clarithromycin",
"NonProprietaryName": "Clarithromycin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20211202",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065136",
"LabelerName": "DirectRx",
"SubstanceName": "CLARITHROMYCIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Macrolide Antimicrobial [EPC], Macrolides [CS], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-01-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20211202",
"SamplePackage": "N",
"IndicationAndUsage": "1.1 Acute Bacterial Exacerbation of Chronic Bronchitis Clarithromycin tablets are indicated in adults for the treatment of mild to moderate infections caused by susceptible isolates due to Haemophilus influenzae, Haemophilus parainfluenzae, Moraxella catarrhalis, or Streptococcus pneumoniae [see Indications and Usage (1.9)]. 1.2 Acute Maxillary Sinusitis Clarithromycin tablets are indicated for the treatment of mild to moderate infections caused by susceptible isolates due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae [see Indications and Usage (1.9)]. 1.3 Community-Acquired Pneumonia Clarithromycin tablets are indicated [see Indications and Usage (1.9)] for the treatment of mild to moderate infections caused by susceptible isolates due to:. Haemophilus influenzae (in adults) Mycoplasma pneumoniae, Streptococcus pneumoniae, Chlamydophila pneumoniae (in adults and pediatric patients) 1.4 Pharyngitis/Tonsillitis Clarithromycin tablets are indicated for the treatment of mild to moderate infections caused by susceptible isolates due to Streptococcus pyogenes as an alternative in individuals who cannot use first line therapy. 1.5 Uncomplicated Skin and Skin Structure Infections Clarithromycin tablets are indicated for the treatment of mild to moderate infections caused by susceptible isolates due to Staphylococcus aureus, or Streptococcus pyogenes. 1.6 Acute Otitis Media Clarithromycin tablets are indicated in pediatric patients for the treatment of mild to moderate infections caused by susceptible isolates due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae [see Clinical Studies (14.2)]. 1.7 Treatment and Prophylaxis of Disseminated Mycobacterial Infections Clarithromycin tablets are indicated for the treatment of mild to moderate infections caused by susceptible isolates due to Mycobacterium avium or Mycobacterium intracellulare in patients with advanced HIV infection [see Clinical Studies (14.1)]. 1.8 Helicobacter pylori Infection and Duodenal Ulcer Disease Clarithromycin tablets are given in combination with other drugs in adults as described below to eradicate H. pylori. The eradication of H. pylori has been demonstrated to reduce the risk of duodenal ulcer recurrence [see Clinical Studies (14.3)]. Clarithromycin tablets in combination with amoxicillin and PREVACID (lansoprazole) or PRILOSEC (omeprazole) delayed-release capsules, as triple therapy, are indicated for the treatment of patients with H. pylori infection and duodenal ulcer disease (active or five-year history of duodenal ulcer) to eradicate H. pylori. Clarithromycin tablets in combination with PRILOSEC (omeprazole) capsules are indicated for the treatment of patients with an active duodenal ulcer associated with H. pylori infection. Regimens which contain clarithromycin tablets as the single antibacterial agent are more likely to be associated with the development of clarithromycin resistance among patients who fail therapy. Clarithromycin-containing regimens should not be used in patients with known or suspected clarithromycin resistant isolates because the efficacy of treatment is reduced in this setting. 1.9 Limitations of Use There is resistance to macrolides in certain bacterial infections caused by Streptococcus pneumoniae and Staphylococcus aureus. Susceptibility testing should be performed when clinically indicated. 1.10 Usage To reduce the development of drug-resistant bacteria and maintain the effectiveness of clarithromycin and other antibacterial drugs, clarithromycin tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Clarithromycin is a semi-synthetic macrolide antimicrobial for oral use. Chemically, it is 6-0‑ methylerythromycin. The molecular formula is C38H69NO13, and the molecular weight is 747.96. The structural formula is. chemicalstructure Figure 1: Structure of Clarithromycin. Clarithromycin is a white to off-white crystalline powder. It is soluble in acetone, slightly soluble in methanol, ethanol, and acetonitrile, and practically insoluble in water. Clarithromycin tablets, USP are intended for oral administration and contain 250 mg or 500 mg of clarithromycin, USP. In addition, each clarithromycin tablet contains the following inactive ingredients: croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, talc, and titanium dioxide."
},
{
"NDCCode": "79903-299-10",
"PackageDescription": "1 BOTTLE in 1 CARTON (79903-299-10) / 100 TABLET in 1 BOTTLE",
"NDC11Code": "79903-0299-10",
"ProductNDC": "79903-299",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Equate Pain Reliever",
"NonProprietaryName": "Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20241121",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M013",
"LabelerName": "WALMART INC.",
"SubstanceName": "ACETAMINOPHEN",
"StrengthNumber": "325",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2024-12-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241121",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves minor aches and pains due to:. headache. muscular aches. backache. minor pain of arthritis. the common cold. toothache. premenstrual and menstrual cramps. temporarily reduces fever."
},
{
"NDCCode": "87063-299-10",
"PackageDescription": "10 SYRINGE, GLASS in 1 CARTON (87063-299-10) / .5 mL in 1 SYRINGE, GLASS (87063-299-01) ",
"NDC11Code": "87063-0299-10",
"ProductNDC": "87063-299",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Flucelvax",
"NonProprietaryName": "Influenza A Virus A/tasmania/318/2025 Cvr-351 (h1n1) Antigen (mdck Cell Derived, Propiolactone Inactivated), Influenza A Virus A/tasmania/787/2025 Cvr-388 (h3n2) Antigen (mdck Cell Derived, Propiolactone Inactivated), Influenza B Virus B/arizona/21/2025 Antigen (mdck Cell Derived, Propiolactone Inactivated)",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20260701",
"EndMarketingDate": "20270731",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125408",
"LabelerName": "ASCLEMED USA INC.",
"SubstanceName": "INFLUENZA A VIRUS A/TASMANIA/318/2025 CVR-351 (H1N1) ANTIGEN (MDCK CELL DERIVED, PROPIOLACTONE INACTIVATED); INFLUENZA A VIRUS A/TASMANIA/787/2025 CVR-388 (H3N2) ANTIGEN (MDCK CELL DERIVED, PROPIOLACTONE INACTIVATED); INFLUENZA B VIRUS - B/ARIZONA/21/2025 ANTIGEN (MDCK CELL DERIVED, PROPIOLACTONE INACTIVATED)",
"StrengthNumber": "15; 15; 15",
"StrengthUnit": "ug/.5mL; ug/.5mL; ug/.5mL",
"Status": "Active",
"LastUpdate": "2026-09-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20260701",
"EndMarketingDatePackage": "20270731",
"SamplePackage": "N",
"IndicationAndUsage": "FLUCELVAX is an inactivated vaccine indicated for active immunization for the prevention of influenza disease caused by influenza virus subtypes A and type B contained in the vaccine. FLUCELVAX is approved for use in persons 6 months of age and older. [see Clinical Studies ( 14)].",
"Description": "FLUCELVAX (Influenza Vaccine) is a trivalent subunit influenza vaccine manufactured using cell derived candidate vaccine viruses (CVV) that are propagated in Madin Darby Canine Kidney (MDCK) cells, a continuous cell line. These cells were adapted to grow freely in suspension in culture medium. The virus is inactivated with β-propiolactone, disrupted by the detergent cetyltrimethylammonium bromide and purified through several process steps. Each of the virus strains are produced and purified separately then pooled to formulate the vaccine. FLUCELVAX is a sterile, slightly opalescent injectable suspension in phosphate buffered saline which is administered intramuscularly. FLUCELVAX is formulated to contain a total of 45 micrograms (mcg) hemagglutinin (HA) per 0.5 mL dose in the recommended ratio of 15 mcg HA of each of the following influenza strains. A/Tasmania/318/2025 CVR-351 (an A/Missouri/11/2025 (H1N1)pdm09-like virus);. A/Tasmania/787/2025 CVR-388 (an A/Darwin/1415/2025 (H3N2)-like virus);. B/Arizona/21/2025 (a B/Pennsylvania/14/2025 (B-Victoria lineage)-like virus). These three influenza virus strains are recommended by FDA for the 2026-2027 influenza season. Each dose of FLUCELVAX may contain residual amounts of MDCK cell protein (≤ 21.6 mcg), protein other than HA (≤ 225 mcg), MDCK cell DNA (≤ 10 ng), polysorbate 80 (≤ 1125 mcg), cetyltrimethylammonium bromide (≤ 13.5 mcg), and β-propiolactone (< 0.5 mcg), which are used in the manufacturing process. FLUCELVAX contains no egg protein or antibiotics. FLUCELVAX 0.5 mL pre-filled syringes contain no preservative. FLUCELVAX 5 mL multi-dose vials contain thimerosal, a mercury derivative, added as a preservative. Each 0.5 mL dose from the multi-dose vial contains 25 mcg mercury. The tip caps and plungers of the pre-filled syringes and the multi-dose vial stopper are not made with natural rubber latex."
},
{
"NDCCode": "0002-5137-11",
"PackageDescription": "1 SYRINGE in 1 CARTON (0002-5137-11) / 3 mL in 1 SYRINGE (0002-5137-01) ",
"NDC11Code": "00002-5137-11",
"ProductNDC": "0002-5137",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Onswik",
"ProprietaryNameSuffix": "Kwikpen",
"NonProprietaryName": "Insulin Efsitora Alfa-gobe",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20260923",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761408",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN EFSITORA ALFA",
"StrengthNumber": "500",
"StrengthUnit": "[iU]/mL",
"Status": "Active",
"LastUpdate": "2026-10-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260923",
"SamplePackage": "N",
"IndicationAndUsage": "ONSWIK is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Insulin efsitora alfa-gobe is a long-acting insulin analog that is divalent (dimer), consisting of a single-chain insulin (comprised of insulin B-chain analog, a short peptide linker, and an insulin A-chain analog) fused to a second peptide linker that is fused to a human IgG2 Fc region. Each monomer is comprised of 299 amino acid residues. Insulin efsitora alfa-gobe is produced using Chinese Hamster Ovary cells by recombinant DNA technology. The molecule contains 24-Cys residues that are involved in 2 interchain and 10 intrachain disulfide bonds. The predominant post-translational modification includes N-linked glycosylation of the heavy chain (Asn150). The molecular weight of insulin efsitora alfa-gobe is approximately 64 kDa. ONSWIK (insulin efsitora alfa-gobe) injection is a clear and colorless to yellow solution for subcutaneous use. ONSWIK injection is a sterile, preserved formulation supplied in two concentrations (500 units/mL or 1,000 units/mL) manufactured for use in a prefilled pen. Each mL of ONSWIK U-500 contains 500 units of insulin efsitora alfa-gobe and the inactive ingredients benzyl alcohol (9 mg), dibasic sodium phosphate (0.084 mg), glycerin (17 mg), monobasic sodium phosphate (0.53 mg), phenol (1.8 mg), poloxamer 188 (0.4 mg), and Water for Injection. The 500 units/mL cartridge delivers 5 units of ONSWIK per 0.01 mL (14.3 mg/mL). Each mL of ONSWIK U-1,000 contains 1,000 units of insulin efsitora alfa-gobe and the inactive ingredients benzyl alcohol (9 mg), dibasic sodium phosphate (0.168 mg), glycerin (17 mg), monobasic sodium phosphate (1.06 mg), phenol (1.8 mg), poloxamer 188 (0.4 mg), and Water for Injection. The 1,000 units/mL cartridge delivers 10 units of ONSWIK per 0.01 mL (28.6 mg/mL). Hydrochloric acid, glacial acetic acid and/or sodium hydroxide may be added to adjust the pH. ONSWIK has a pH of approximately 6.5."
},
{
"NDCCode": "0002-5240-11",
"PackageDescription": "1 SYRINGE in 1 CARTON (0002-5240-11) / 3 mL in 1 SYRINGE (0002-5240-01) ",
"NDC11Code": "00002-5240-11",
"ProductNDC": "0002-5240",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Onswik",
"ProprietaryNameSuffix": "Kwikpen",
"NonProprietaryName": "Insulin Efsitora Alfa-gobe",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20260923",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761408",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN EFSITORA ALFA",
"StrengthNumber": "1000",
"StrengthUnit": "[iU]/mL",
"Status": "Active",
"LastUpdate": "2026-10-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260923",
"SamplePackage": "N",
"IndicationAndUsage": "ONSWIK is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Insulin efsitora alfa-gobe is a long-acting insulin analog that is divalent (dimer), consisting of a single-chain insulin (comprised of insulin B-chain analog, a short peptide linker, and an insulin A-chain analog) fused to a second peptide linker that is fused to a human IgG2 Fc region. Each monomer is comprised of 299 amino acid residues. Insulin efsitora alfa-gobe is produced using Chinese Hamster Ovary cells by recombinant DNA technology. The molecule contains 24-Cys residues that are involved in 2 interchain and 10 intrachain disulfide bonds. The predominant post-translational modification includes N-linked glycosylation of the heavy chain (Asn150). The molecular weight of insulin efsitora alfa-gobe is approximately 64 kDa. ONSWIK (insulin efsitora alfa-gobe) injection is a clear and colorless to yellow solution for subcutaneous use. ONSWIK injection is a sterile, preserved formulation supplied in two concentrations (500 units/mL or 1,000 units/mL) manufactured for use in a prefilled pen. Each mL of ONSWIK U-500 contains 500 units of insulin efsitora alfa-gobe and the inactive ingredients benzyl alcohol (9 mg), dibasic sodium phosphate (0.084 mg), glycerin (17 mg), monobasic sodium phosphate (0.53 mg), phenol (1.8 mg), poloxamer 188 (0.4 mg), and Water for Injection. The 500 units/mL cartridge delivers 5 units of ONSWIK per 0.01 mL (14.3 mg/mL). Each mL of ONSWIK U-1,000 contains 1,000 units of insulin efsitora alfa-gobe and the inactive ingredients benzyl alcohol (9 mg), dibasic sodium phosphate (0.168 mg), glycerin (17 mg), monobasic sodium phosphate (1.06 mg), phenol (1.8 mg), poloxamer 188 (0.4 mg), and Water for Injection. The 1,000 units/mL cartridge delivers 10 units of ONSWIK per 0.01 mL (28.6 mg/mL). Hydrochloric acid, glacial acetic acid and/or sodium hydroxide may be added to adjust the pH. ONSWIK has a pH of approximately 6.5."
},
{
"NDCCode": "0054-0210-25",
"PackageDescription": "100 TABLET in 1 BOTTLE (0054-0210-25) ",
"NDC11Code": "00054-0210-25",
"ProductNDC": "0054-0210",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Protriptyline Hydrochloride",
"NonProprietaryName": "Protriptyline Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080916",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078913",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "PROTRIPTYLINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tricyclic Antidepressant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-04-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20080916",
"SamplePackage": "N",
"IndicationAndUsage": "Protriptyline hydrochloride is indicated for the treatment of symptoms of mental depression in patients who are under close medical supervision. Its activating properties make it particularly suitable for withdrawn and anergic patients.",
"Description": "Protriptyline HCl is N-methyl-5H dibenzo[a,d]-cycloheptene-5-propanamine hydrochloride. Its molecular formula is C19H21NHCl and its structural formula is. Protriptyline hydrochloride, a dibenzocycloheptene derivative, has a molecular weight of 299.84. It is a white crystalline powder that is freely soluble in water and soluble in dilute HCl. Protriptyline Hydrochloride Tablets, USP are available for oral administration containing either 5 mg or 10 mg of protriptyline hydrochloride, USP. Each tablet contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, magnesium stearate and microcrystalline cellulose."
},
{
"NDCCode": "0054-0211-25",
"PackageDescription": "100 TABLET in 1 BOTTLE (0054-0211-25) ",
"NDC11Code": "00054-0211-25",
"ProductNDC": "0054-0211",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Protriptyline Hydrochloride",
"NonProprietaryName": "Protriptyline Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080916",
"EndMarketingDate": "20251031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078913",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "PROTRIPTYLINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tricyclic Antidepressant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20080916",
"EndMarketingDatePackage": "20251031",
"SamplePackage": "N",
"IndicationAndUsage": "Protriptyline hydrochloride is indicated for the treatment of symptoms of mental depression in patients who are under close medical supervision. Its activating properties make it particularly suitable for withdrawn and anergic patients.",
"Description": "Protriptyline HCl is N-methyl-5H dibenzo[a,d]-cycloheptene-5-propanamine hydrochloride. Its molecular formula is C19H21NHCl and its structural formula is. Protriptyline hydrochloride, a dibenzocycloheptene derivative, has a molecular weight of 299.84. It is a white crystalline powder that is freely soluble in water and soluble in dilute HCl. Protriptyline Hydrochloride Tablets, USP are available for oral administration containing either 5 mg or 10 mg of protriptyline hydrochloride, USP. Each tablet contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, magnesium stearate and microcrystalline cellulose."
},
{
"NDCCode": "0093-0810-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (0093-0810-01) ",
"NDC11Code": "00093-0810-01",
"ProductNDC": "0093-0810",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nortriptyline Hydrochloride",
"NonProprietaryName": "Nortriptyline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19950405",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074132",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "NORTRIPTYLINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tricyclic Antidepressant [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19950405",
"SamplePackage": "N",
"IndicationAndUsage": "Nortriptyline hydrochloride capsules are indicated for the relief of symptoms of depression. Endogenous depressions are more likely to be alleviated than are other depressive states.",
"Description": "Nortriptyline hydrochloride, USP is 1-propanamine, 3-(10,11-dihydro-5H-dibenzo[a,d]cyclohepten-5-ylidene)-N-methyl-, hydrochloride. The structural formula is as follows. C19H21NHCl M.W. 299.84. Nortriptyline hydrochloride, USP is a white to off-white powder, having a slight, characteristic odor. It is soluble in water and in chloroform; sparingly soluble in methanol; and practically insoluble in most organic solvents. Each capsule, for oral administration, contains nortriptyline hydrochloride, USP equivalent to 10 mg, 25 mg, 50 mg or 75 mg nortriptyline. In addition, each capsule contains the following inactive ingredients: corn starch, dimethicone, gelatin, iron oxide black, potassium hydroxide, propylene glycol, shellac glaze, sodium lauryl sulfate, strong ammonia solution, and titanium dioxide. The 10 mg, 25 mg and 75 mg capsules also contain D&C Yellow No. 10, FD&C Blue No. 1, and FD&C Yellow No. 6."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>82260-299-10</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (82260-299-10) / 10 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>82260-0299-10</NDC11Code>
<ProductNDC>82260-299</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Loteprednol Etabonate</ProprietaryName>
<NonProprietaryName>Loteprednol Etabonate</NonProprietaryName>
<DosageFormName>SUSPENSION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20230407</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020583</ApplicationNumber>
<LabelerName>Bausch & Lomb Americas Inc.</LabelerName>
<SubstanceName>LOTEPREDNOL ETABONATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230407</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Loteprednol etabonate ophthalmic suspension is indicated for the treatment of steroid-responsive inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe such as allergic conjunctivitis, acne rosacea, superficial punctate keratitis, herpes zoster keratitis, iritis, cyclitis, selected infective conjunctivitides, when the inherent hazard of steroid use is accepted to obtain an advisable diminution in edema and inflammation. Loteprednol etabonate is less effective than prednisolone acetate 1% in two 28-day controlled clinical studies in acute anterior uveitis, where 72% of patients treated with loteprednol etabonate experienced resolution of anterior chamber cells, compared to 87% of patients treated with prednisolone acetate 1%. The incidence of patients with clinically significant increases in IOP (≥10 mmHg) was 1% with loteprednol etabonate and 6% with prednisolone acetate 1%. Loteprednol etabonate should not be used in patients who require a more potent corticosteroid for this indication. Loteprednol etabonate ophthalmic suspension is also indicated for the treatment of post-operative inflammation following ocular surgery.</IndicationAndUsage>
<Description>Loteprednol etabonate ophthalmic suspension contains a sterile, topical anti-inflammatory corticosteroid for ophthalmic use. Loteprednol etabonate is a white to off-white powder. Loteprednol etabonate is represented by the following structural formula. Chemical Name. chloromethyl 17α-[(ethoxycarbonyl)oxy]-11β-hydroxy-3-oxoandrosta-1,4-diene-17β-carboxylate. Each mL contains. Active: Loteprednol Etabonate 5 mg (0.5%). Inactives: Edetate Disodium, Glycerin, Povidone, Purified Water and Tyloxapol. Hydrochloric Acid and/or Sodium Hydroxide may be added to adjust the pH. The suspension is essentially isotonic with a tonicity of 250 to 310 mOsmol/kg. Preservative: Benzalkonium Chloride 0.01%.</Description>
</NDC>
<NDC>
<NDCCode>82260-299-05</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (82260-299-05) / 5 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>82260-0299-05</NDC11Code>
<ProductNDC>82260-299</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Loteprednol Etabonate</ProprietaryName>
<NonProprietaryName>Loteprednol Etabonate</NonProprietaryName>
<DosageFormName>SUSPENSION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20230407</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020583</ApplicationNumber>
<LabelerName>Bausch & Lomb Americas Inc.</LabelerName>
<SubstanceName>LOTEPREDNOL ETABONATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230407</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Loteprednol etabonate ophthalmic suspension is indicated for the treatment of steroid-responsive inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe such as allergic conjunctivitis, acne rosacea, superficial punctate keratitis, herpes zoster keratitis, iritis, cyclitis, selected infective conjunctivitides, when the inherent hazard of steroid use is accepted to obtain an advisable diminution in edema and inflammation. Loteprednol etabonate is less effective than prednisolone acetate 1% in two 28-day controlled clinical studies in acute anterior uveitis, where 72% of patients treated with loteprednol etabonate experienced resolution of anterior chamber cells, compared to 87% of patients treated with prednisolone acetate 1%. The incidence of patients with clinically significant increases in IOP (≥10 mmHg) was 1% with loteprednol etabonate and 6% with prednisolone acetate 1%. Loteprednol etabonate should not be used in patients who require a more potent corticosteroid for this indication. Loteprednol etabonate ophthalmic suspension is also indicated for the treatment of post-operative inflammation following ocular surgery.</IndicationAndUsage>
<Description>Loteprednol etabonate ophthalmic suspension contains a sterile, topical anti-inflammatory corticosteroid for ophthalmic use. Loteprednol etabonate is a white to off-white powder. Loteprednol etabonate is represented by the following structural formula. Chemical Name. chloromethyl 17α-[(ethoxycarbonyl)oxy]-11β-hydroxy-3-oxoandrosta-1,4-diene-17β-carboxylate. Each mL contains. Active: Loteprednol Etabonate 5 mg (0.5%). Inactives: Edetate Disodium, Glycerin, Povidone, Purified Water and Tyloxapol. Hydrochloric Acid and/or Sodium Hydroxide may be added to adjust the pH. The suspension is essentially isotonic with a tonicity of 250 to 310 mOsmol/kg. Preservative: Benzalkonium Chloride 0.01%.</Description>
</NDC>
<NDC>
<NDCCode>82260-299-15</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (82260-299-15) / 15 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>82260-0299-15</NDC11Code>
<ProductNDC>82260-299</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Loteprednol Etabonate</ProprietaryName>
<NonProprietaryName>Loteprednol Etabonate</NonProprietaryName>
<DosageFormName>SUSPENSION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20230407</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020583</ApplicationNumber>
<LabelerName>Bausch & Lomb Americas Inc.</LabelerName>
<SubstanceName>LOTEPREDNOL ETABONATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230407</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Loteprednol etabonate ophthalmic suspension is indicated for the treatment of steroid-responsive inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe such as allergic conjunctivitis, acne rosacea, superficial punctate keratitis, herpes zoster keratitis, iritis, cyclitis, selected infective conjunctivitides, when the inherent hazard of steroid use is accepted to obtain an advisable diminution in edema and inflammation. Loteprednol etabonate is less effective than prednisolone acetate 1% in two 28-day controlled clinical studies in acute anterior uveitis, where 72% of patients treated with loteprednol etabonate experienced resolution of anterior chamber cells, compared to 87% of patients treated with prednisolone acetate 1%. The incidence of patients with clinically significant increases in IOP (≥10 mmHg) was 1% with loteprednol etabonate and 6% with prednisolone acetate 1%. Loteprednol etabonate should not be used in patients who require a more potent corticosteroid for this indication. Loteprednol etabonate ophthalmic suspension is also indicated for the treatment of post-operative inflammation following ocular surgery.</IndicationAndUsage>
<Description>Loteprednol etabonate ophthalmic suspension contains a sterile, topical anti-inflammatory corticosteroid for ophthalmic use. Loteprednol etabonate is a white to off-white powder. Loteprednol etabonate is represented by the following structural formula. Chemical Name. chloromethyl 17α-[(ethoxycarbonyl)oxy]-11β-hydroxy-3-oxoandrosta-1,4-diene-17β-carboxylate. Each mL contains. Active: Loteprednol Etabonate 5 mg (0.5%). Inactives: Edetate Disodium, Glycerin, Povidone, Purified Water and Tyloxapol. Hydrochloric Acid and/or Sodium Hydroxide may be added to adjust the pH. The suspension is essentially isotonic with a tonicity of 250 to 310 mOsmol/kg. Preservative: Benzalkonium Chloride 0.01%.</Description>
</NDC>
<NDC>
<NDCCode>82260-001-01</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (82260-001-01) / .4 mL in 1 VIAL</PackageDescription>
<NDC11Code>82260-0001-01</NDC11Code>
<ProductNDC>82260-001</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atropine Sulfate</ProprietaryName>
<NonProprietaryName>Atropine Sulfate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20230421</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA213581</ApplicationNumber>
<LabelerName>Bausch & Lomb Americas Inc.</LabelerName>
<SubstanceName>ATROPINE SULFATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230421</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atropine Sulfate Ophthalmic Solution, USP 1% is indicated for.</IndicationAndUsage>
<Description>Atropine Sulfate Ophthalmic Solution, USP 1% is an aseptically prepared, sterile solution for topical ophthalmic use. The product does not contain an antimicrobial preservative. The active ingredient is represented by the chemical structure. Chemical Name: Benzeneacetic acid, α-(hydroxymethyl)-, 8-methyl-8-azabicyclo[3.2.1.]oct-3-yl ester, endo –(±)-, sulfate (2:1) (salt), monohydrate. Molecular Formula: (C 17H 23NO 3) 2 H 2SO 4 H 2O. Molecular Weight: 694.84 g/mol. Each mL of Atropine Sulfate Ophthalmic Solution, USP 1% contains: Active:atropine sulfate 10 mg equivalent to 8.3 mg of atropine. Inactives:boric acid, hydroxypropyl methylcellulose, hydrochloric acid and/or sodium hydroxide may be added to adjust pH (3.5 to 6.0), and water for injection USP.</Description>
</NDC>
<NDC>
<NDCCode>82260-102-10</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (82260-102-10) / 10 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>82260-0102-10</NDC11Code>
<ProductNDC>82260-102</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenylephrine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenylephrine Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20230331</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA203510</ApplicationNumber>
<LabelerName>Bausch & Lomb Americas Inc.</LabelerName>
<SubstanceName>PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-07-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230331</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phenylephrine Hydrochloride Ophthalmic Solution, USP 2.5% and 10% is indicated to dilate the pupil.</IndicationAndUsage>
<Description>Phenylephrine Hydrochloride Ophthalmic Solution, USP 2.5% and 10% is a sterile, clear, colorless, topical mydriatic agent for ophthalmic use. The chemical name is (R)-3-hydroxy-α-[(methylamino)methyl]benzenemethanol hydrochloride. Phenylephrine hydrochloride is represented by the following structural formula. Phenylephrine hydrochloride has a molecular weight of 203.67 and an empirical formula of C9H13NO2-HCl. Each mL of Phenylephrine Hydrochloride Ophthalmic Solution, 2.5% contains: ACTIVE: phenylephrine hydrochloride 25 mg (2.5%); INACTIVES: sodium phosphate monobasic, sodium phosphate dibasic; boric acid, water for injection. Hydrochloric acid and/or sodium hydroxide may be added to adjust pH (4.0-7.5). The solution has a tonicity of 500 mOsm/kg; PRESERVATIVE: benzalkonium chloride 0.01%. Each mL of Phenylephrine Hydrochloride Ophthalmic Solution, USP 10% contains: ACTIVE: phenylephrine hydrochloride 100 mg (10%); INACTIVES: sodium phosphate monobasic, sodium phosphate dibasic; water for injection. Hydrochloric acid and/or sodium hydroxide may be added to adjust pH (4.0-7.5). The solution has a tonicity of 1000 mOsm/kg; PRESERVATIVE: benzalkonium chloride 0.01%.</Description>
</NDC>
<NDC>
<NDCCode>82260-358-10</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (82260-358-10) / 10 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>82260-0358-10</NDC11Code>
<ProductNDC>82260-358</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Loteprednol Etabonate And Tobramycin</ProprietaryName>
<NonProprietaryName>Loteprednol Etabonate And Tobramycin</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20260109</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA050804</ApplicationNumber>
<LabelerName>Bausch & Lomb Americas Inc.</LabelerName>
<SubstanceName>LOTEPREDNOL ETABONATE; TOBRAMYCIN</SubstanceName>
<StrengthNumber>5; 3</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260109</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Loteprednol Etabonate and Tobramycin Ophthalmic Suspension 0.5%/0.3% is a topical anti-infective and corticosteroid combination for steroid-responsive inflammatory ocular conditions for which a corticosteroid is indicated and where superficial bacterial ocular infection or a risk of bacterial ocular infection exists. Ocular steroids are indicated in inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe such as allergic conjunctivitis, acne rosacea, superficial punctate keratitis, herpes zoster keratitis, iritis, cyclitis, and where the inherent risk of steroid use in certain infective conjunctivitides is accepted to obtain a diminution in edema and inflammation. They are also indicated in chronic anterior uveitis and corneal injury from chemical, radiation or thermal burns, or penetration of foreign bodies. The use of a combination drug with an anti-infective component is indicated where the risk of superficial ocular infection is high or where there is an expectation that potentially dangerous numbers of bacteria will be present in the eye. The particular anti-infective drug in this product (tobramycin) is active against the following common bacterial eye pathogens. Staphylococci, including S. aureusand S. epidermidis(coagulase-positive and coagulase-negative), including penicillin-resistant strains. Streptococci, including some of the Group A-beta-hemolytic species, some nonhemolytic species, and some Streptococcus pneumoniae, Pseudomonas aeruginosa, Escherichia coli, Klebsiella pneumoniae, Enterobacter aerogenes, Proteus mirabilis, Morganella morganii, most Proteus vulgarisstrains, Haemophilus influenzae, and H. aegyptius, Moraxella lacunata, Acinetobacter calcoaceticusand some Neisseriaspecies.</IndicationAndUsage>
<Description>Loteprednol Etabonate and Tobramycin Ophthalmic Suspension is a sterile, multiple dose topical anti-inflammatory corticosteroid and anti-infective combination for ophthalmic use. Both loteprednol etabonate and tobramycin are white to off-white powders. The chemical structures of loteprednol etabonate and tobramycin are shown below. Loteprednol etabonate. Chemical name: chloromethyl 17α-[(ethoxycarbonyl)oxy]-11 β-hydroxy-3-oxoandrosta-1,4-diene-17 β-carboxylate. Tobramycin. Chemical name. O-3-Amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxystreptamine. Each mL contains: Actives: Loteprednol Etabonate 5 mg (0.5%) and Tobramycin 3 mg (0.3%). Inactives: Edetate Disodium, Glycerin, Povidone, Purified Water, Tyloxapol, and Benzalkonium Chloride 0.01% (preservative). Sulfuric Acid and/or Sodium Hydroxide may be added to adjust the pH to 5.5 to 6.2. The suspension is essentially isotonic with a tonicity of 260 to 320 mOsm/kg.</Description>
</NDC>
<NDC>
<NDCCode>82260-496-05</NDCCode>
<PackageDescription>6 POUCH in 1 CARTON (82260-496-05) / 10 CONTAINER in 1 POUCH / .3 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>82260-0496-05</NDC11Code>
<ProductNDC>82260-496</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Timolol Maleate</ProprietaryName>
<NonProprietaryName>Timolol Maleate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20220217</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA019463</ApplicationNumber>
<LabelerName>Bausch & Lomb Americas Inc.</LabelerName>
<SubstanceName>TIMOLOL MALEATE</SubstanceName>
<StrengthNumber>6.8</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220217</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Preservative-free Timolol Maleate Ophthalmic Solution in OCUDOSE is indicated in the treatment of elevated intraocular pressure in patients with ocular hypertension or open-angle glaucoma. Preservative-free Timolol Maleate Ophthalmic Solution in OCUDOSE may be used when a patient is sensitive to the preservative in Timolol Maleate Ophthalmic Solution, benzalkonium chloride, or when use of a preservative-free topical medication is advisable.</IndicationAndUsage>
<Description>Timolol maleate is a non-selective beta-adrenergic receptor blocking agent. Its chemical name is (-)-1-( tert-butylamino)-3-[(4-morpholino-1,2,5-thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of timolol maleate is:. Its molecular formula is C 13H 24N 4O 3SC 4H 4O 4, and its structural formula is:. Timolol maleate has a molecular weight of 432.49. It is a white, odorless, crystalline powder which is soluble in water; sparingly soluble in ethanol; slightly soluble in chloroform; practically insoluble in ether. Timolol maleate is stable at room temperature. Timolol maleate ophthalmic solution is supplied in two formulations: Timolol Maleate Ophthalmic Solution, which contains the preservative benzalkonium chloride; and Timolol Maleate Ophthalmic Solution, the preservative-free formulation. Preservative-free Timolol Maleate Ophthalmic Solution is supplied in OCUDOSE ®, a unit dose container, as a sterile, isotonic, buffered, aqueous solution of timolol maleate. Each mL of Preservative-free Timolol Maleate Ophthalmic Solution in OCUDOSE ®0.5% contains 5 mg of timolol (6.8 mg of timolol maleate). Inactive ingredients: monobasic and dibasic sodium phosphate, sodium hydroxide to adjust pH, and water for injection.</Description>
</NDC>
<NDC>
<NDCCode>82260-630-10</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (82260-630-10) / 10 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>82260-0630-10</NDC11Code>
<ProductNDC>82260-630</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bepotastine Besilate</ProprietaryName>
<NonProprietaryName>Bepotastine Besilate</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20210528</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA022288</ApplicationNumber>
<LabelerName>Bausch & Lomb Americas Inc.</LabelerName>
<SubstanceName>BEPOTASTINE BESYLATE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210528</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bepotastine Besilate Ophthalmic Solution, 1.5% is a histamine H 1receptor antagonist indicated for the treatment of itching associated with signs and symptoms of allergic conjunctivitis.</IndicationAndUsage>
<Description>Bepotastine Besilate Ophthalmic Solution, 1.5% is a sterile, topically administered drug for ophthalmic use. Each mL of Bepotastine Besilate Ophthalmic Solution contains 15 mg bepotastine besilate. Bepotastine besilate is designated chemically as (+) -4-[[(S)-p-chloro-alpha -2-pyridylbenzyl]oxy]-1-piperidine butyric acid monobenzenesulfonate. The chemical structure for bepotastine besilate is. Bepotastine besilate is a white to pale yellowish-white crystalline powder. The molecular weight of bepotastine besilate is 547.06 daltons. Bepotastine Besilate Ophthalmic Solution is supplied as a sterile, aqueous 1.5% solution, with an approximate pH of 6.8. The osmolality of Bepotastine Besilate Ophthalmic Solution, 1.5% is approximately 295 mOsm/kg. Each mL of Bepotastine Besilate Ophthalmic Solution, 1.5% contains: 1 Active: bepotastine besilate 15 mg (equivalent to 10.7 mg bepotastine), 2 Inactives: monobasic sodium phosphate dihydrate, sodium chloride, sodium hydroxide to adjust pH, and water for injection, USP, 3 Preservative: benzalkonium chloride 0.005%.</Description>
</NDC>
<NDC>
<NDCCode>82260-813-10</NDCCode>
<PackageDescription>1 BOTTLE, DISPENSING in 1 CARTON (82260-813-10) / 10 mL in 1 BOTTLE, DISPENSING</PackageDescription>
<NDC11Code>82260-0813-10</NDC11Code>
<ProductNDC>82260-813</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Timolol Maleate</ProprietaryName>
<NonProprietaryName>Timolol Maleate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20200601</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA018086</ApplicationNumber>
<LabelerName>Bausch & Lomb Americas Inc.</LabelerName>
<SubstanceName>TIMOLOL MALEATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Timolol Maleate Ophthalmic Solution is indicated in the treatment of elevated intraocular pressure in patients with ocular hypertension or open-angle glaucoma.</IndicationAndUsage>
<Description>Timolol Maleate Ophthalmic Solution is a non-selective beta-adrenergic receptor blocking agent. Its chemical name is (-)-1-( tert-butylamino)-3-[(4-morpholino-1,2,5-thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of timolol maleate is:. Its molecular formula is C 13H 24N 4O 3SC 4H 4O 4and its structural formula is:. Timolol maleate has a molecular weight of 432.50. It is a white, odorless, crystalline powder which is soluble in water, sparingly soluble in ethanol; slightly soluble in chloroform; practically insoluble in ether. Timolol Maleate Ophthalmic Solution is stable at room temperature. Timolol Maleate Ophthalmic Solution is supplied as a sterile, isotonic, buffered, aqueous solution of timolol maleate in two dosage strengths. Each mL of Timolol Maleate Ophthalmic Solution 0.25% contains 2.5 mg of timolol (3.4 mg of timolol maleate). The pH of the solution is approximately 7, and the osmolality is 260-340 mOsm/kg. Each mL of Timolol Maleate Ophthalmic Solution 0.5% contains 5 mg of timolol (6.8 mg of timolol maleate). Inactive ingredients: monobasic and dibasic sodium phosphate, sodium hydroxide to adjust pH, and purified water. Benzalkonium chloride 0.01% is added as preservative.</Description>
</NDC>
<NDC>
<NDCCode>24208-299-10</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (24208-299-10) / 10 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>24208-0299-10</NDC11Code>
<ProductNDC>24208-299</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lotemax</ProprietaryName>
<NonProprietaryName>Loteprednol Etabonate</NonProprietaryName>
<DosageFormName>SUSPENSION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>19980309</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020583</ApplicationNumber>
<LabelerName>Bausch & Lomb Incorporated</LabelerName>
<SubstanceName>LOTEPREDNOL ETABONATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980903</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LOTEMAX is indicated for the treatment of steroid-responsive inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe such as allergic conjunctivitis, acne rosacea, superficial punctate keratitis, herpes zoster keratitis, iritis, cyclitis, selected infective conjunctivitides, when the inherent hazard of steroid use is accepted to obtain an advisable diminution in edema and inflammation. LOTEMAX is less effective than prednisolone acetate 1% in two 28-day controlled clinical studies in acute anterior uveitis, where 72% of patients treated with LOTEMAX experienced resolution of anterior chamber cells, compared to 87% of patients treated with prednisolone acetate 1%. The incidence of patients with clinically significant increases in IOP (≥10 mmHg) was 1% with LOTEMAX and 6% with prednisolone acetate 1%. LOTEMAX should not be used in patients who require a more potent corticosteroid for this indication. LOTEMAX is also indicated for the treatment of post-operative inflammation following ocular surgery.</IndicationAndUsage>
<Description>LOTEMAX® (loteprednol etabonate ophthalmic suspension) contains a sterile, topical anti-inflammatory corticosteroid for ophthalmic use. Loteprednol etabonate is a white to off-white powder. Loteprednol etabonate is represented by the following structural formula. Chemical Name. chloromethyl 17α-[(ethoxycarbonyl)oxy]-11β-hydroxy-3-oxoandrosta-1,4-diene-17β-carboxylate. Each mL contains. Active: Loteprednol Etabonate 5 mg (0.5%). Inactives: Edetate Disodium, Glycerin, Povidone, Purified Water and Tyloxapol. Hydrochloric Acid and/or Sodium Hydroxide may be added to adjust the pH. The suspension is essentially isotonic with a tonicity of 250 to 310 mOsmol/kg. Preservative: Benzalkonium Chloride 0.01%.</Description>
</NDC>
<NDC>
<NDCCode>33342-299-12</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (33342-299-12) > 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>33342-0299-12</NDC11Code>
<ProductNDC>33342-299</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eszopiclone</ProprietaryName>
<NonProprietaryName>Eszopiclone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150131</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202929</ApplicationNumber>
<LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
<SubstanceName>ESZOPICLONE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2022-11-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150131</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Eszopiclone tablets are indicated for the treatment of insomnia. In controlled outpatient and sleep laboratory studies, eszopiclone tablets administered at bedtime decreased sleep latency and improved sleep maintenance. The clinical trials performed in support of efficacy were up to 6 months in duration. The final formal assessments of sleep latency and maintenance were performed at 4 weeks in the 6-week study (adults only), at the end of both 2-week studies (elderly only) and at the end of the 6-month study (adults only).</IndicationAndUsage>
<Description>Eszopiclone, USP is a nonbenzodiazepine hypnotic agent that is a pyrrolopyrazine derivative of the cyclopyrrolone class. The chemical name of eszopiclone is (+)-(5S)-6-(5-chloropyridin-2-yl)-7-oxo-6,7-dihydro-5H-pyrrolo[3,4-b] pyrazin-5-yl 4-methylpiperazine-1-carboxylate. Its molecular weight is 388.81, and its empirical formula is C17H17CIN6O3. Eszopiclone, USP has a single chiral center with an (S)-configuration. It has the following chemical structure. Eszopiclone, USP is a white to light-yellow crystalline solid. Eszopiclone is very slightly soluble in water, slightly soluble in ethanol, and soluble in phosphate buffer (pH 3.2). Eszopiclone, USP is formulated as film-coated tablets for oral administration. Eszopiclone tablets, USP contain 1 mg, 2 mg, or 3 mg eszopiclone, USP and the following inactive ingredients: dibasic calcium phosphate dihydrate, colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, titanium dioxide, and triacetin. In addition, both the 1 mg and 3 mg tablets contain FD&C Blue #2.</Description>
</NDC>
<NDC>
<NDCCode>35356-299-30</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (35356-299-30) > 10 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>35356-0299-30</NDC11Code>
<ProductNDC>35356-299</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Micardis Hct</ProprietaryName>
<NonProprietaryName>Telmisartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120315</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021162</ApplicationNumber>
<LabelerName>Lake Erie Medical & Surgical Supply DBA Quality Care Products LLC</LabelerName>
<SubstanceName>TELMISARTAN; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>80; 12.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC],Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-09-26</LastUpdate>
</NDC>
<NDC>
<NDCCode>51060-299-01</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (51060-299-01) / 10 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>51060-0299-01</NDC11Code>
<ProductNDC>51060-299</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Rainforest Of The Sea Water Foundation Broad Spectrum Spf 15 Sunscreen</ProprietaryName>
<ProprietaryNameSuffix>57s Rich Sand</ProprietaryNameSuffix>
<NonProprietaryName>Titanium Dioxide And Zinc Oxide</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20181101</StartMarketingDate>
<EndMarketingDate>20231231</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>Tarte, Inc.</LabelerName>
<SubstanceName>TITANIUM DIOXIDE; ZINC OXIDE</SubstanceName>
<StrengthNumber>62.2; 38.3</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20181101</StartMarketingDatePackage>
<EndMarketingDatePackage>20231231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>54575-299-10</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (54575-299-10)</PackageDescription>
<NDC11Code>54575-0299-10</NDC11Code>
<ProductNDC>54575-299</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Guinea Pig Hair And Epithelia</ProprietaryName>
<NonProprietaryName>Cavia Porcellus Hair And Cavia Porcellus Skin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19671207</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101376</ApplicationNumber>
<LabelerName>Allergy Laboratories, Inc.</LabelerName>
<SubstanceName>CAVIA PORCELLUS HAIR; CAVIA PORCELLUS SKIN</SubstanceName>
<StrengthNumber>.5; .5</StrengthNumber>
<StrengthUnit>g/20mL; g/20mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Animal Hair Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [CS],Animal Fur [CS],Non-Standardized Animal Skin Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Cells, Epidermal [EXT],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
</NDC>
<NDC>
<NDCCode>58411-299-10</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (58411-299-10) > 30 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>58411-0299-10</NDC11Code>
<ProductNDC>58411-299</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Shiseido Sports Bb</ProprietaryName>
<ProprietaryNameSuffix>Light</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate And Titanium Dioxide</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170201</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>SHISEIDO AMERICAS CORPORATION</LabelerName>
<SubstanceName>OCTINOXATE; TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>1727; 5288</StrengthNumber>
<StrengthUnit>mg/30mL; mg/30mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>60954-299-10</NDCCode>
<PackageDescription>1 JAR in 1 BOX (60954-299-10) / 10 g in 1 JAR</PackageDescription>
<NDC11Code>60954-0299-10</NDC11Code>
<ProductNDC>60954-299</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Eagle Brand</ProprietaryName>
<ProprietaryNameSuffix>Muscular Balm</ProprietaryNameSuffix>
<NonProprietaryName>Menthol, Methyl Salicylate</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20250819</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M017</ApplicationNumber>
<LabelerName>PT. EAGLE INDO PHARMA</LabelerName>
<SubstanceName>MENTHOL; METHYL SALICYLATE</SubstanceName>
<StrengthNumber>1.222; 2.466</StrengthNumber>
<StrengthUnit>g/10g; g/10g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2026-04-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250819</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the temporary relief of minor aches and pains of muscles and joints associated with simple backache arthritis strains bruises sprains.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>67091-299-02</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (67091-299-02) / 10 TABLET, COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>67091-0299-02</NDC11Code>
<ProductNDC>67091-299</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Mucus Relief Sinus Pressure Pain And Cough</ProprietaryName>
<NonProprietaryName>Acetaminophen, Dextromethorphan Hydrobromide, Guaifenesin, And Phenylephrine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230411</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M012</ApplicationNumber>
<LabelerName>WINCO FOODS, LLC</LabelerName>
<SubstanceName>ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE; GUAIFENESIN; PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>325; 10; 200; 5</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha1-Agonists [MoA], Decreased Respiratory Secretion Viscosity [PE], Expectorant [EPC], Increased Respiratory Secretions [PE], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA], alpha-1 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230411</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves: headachenasal congestionminor aches and painssinus congestion and pressurecough. promotes nasal and/or sinus drainage. helps loosen phlegm (mucus) and thin bronchial secretions to rid the bronchial passageways of bothersome mucus and make coughs more productive.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>67457-299-10</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (67457-299-10) > 10 mL in 1 VIAL, MULTI-DOSE (67457-299-00) </PackageDescription>
<NDC11Code>67457-0299-10</NDC11Code>
<ProductNDC>67457-299</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Naloxone Hydrochloride</ProprietaryName>
<NonProprietaryName>Naloxone Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20160914</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205014</ApplicationNumber>
<LabelerName>Mylan Institutional LLC</LabelerName>
<SubstanceName>NALOXONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Opioid Antagonist [EPC], Opioid Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160914</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Naloxone hydrochloride injection is indicated for the complete or partial reversal of opioid depression, including respiratory depression, induced by natural and synthetic opioids including propoxyphene, methadone, and certain mixed agonist-antagonist analgesics: nalbuphine, pentazocine, butorphanol and cyclazocine. Naloxone hydrochloride injection is also indicated for diagnosis of suspected or known acute opioid overdosage. Naloxone hydrochloride injection may be useful as an adjunctive agent to increase blood pressure in the management of septic shock (see CLINICAL PHARMACOLOGY: Adjunctive Use in Septic Shock).</IndicationAndUsage>
<Description>Naloxone, an opioid antagonist, is a synthetic congener of oxymorphone. In structure it differs from oxymorphone in that the methyl group on the nitrogen atom is replaced by an allyl group. Naloxone hydrochloride, USP is chemically designated 17-Allyl-4,5α-epoxy-3,14-dihydroxymorphinan-6-one hydrochloride (C19H21NO4 HCl), a white to slightly off-white powder soluble in water, in dilute acids, and in strong alkali; slightly soluble in alcohol; practically insoluble in ether and chloroform. It has a molecular weight of 363.84. It has the following structural formula. Naloxone hydrochloride injection is a sterile, nonpyrogenic solution of naloxone hydrochloride in water for injection. Each milliliter (mL) contains 0.4 mg naloxone hydrochloride and sodium chloride to adjust tonicity in water for injection. May contain hydrochloric acid for pH adjustment; pH 4 (3 to 6.5). Naloxone hydrochloride injection may be administered intravenously, intramuscularly, or subcutaneously. The multiple-dose solution contains, in addition, 1.8 mg/mL methylparaben and 0.2 mg/mL propylparaben added as preservatives.</Description>
</NDC>
<NDC>
<NDCCode>68382-299-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (68382-299-10) </PackageDescription>
<NDC11Code>68382-0299-10</NDC11Code>
<ProductNDC>68382-299</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Irbesartan</ProprietaryName>
<NonProprietaryName>Irbesartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171208</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079213</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>IRBESARTAN</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171208</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Irbesartan tablets are an angiotensin II receptor blocker (ARB) indicated for: 1 Treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1), 2 Treatment of diabetic nephropathy in hypertensive patients with type 2 diabetes, an elevated serum creatinine, and proteinuria. (1.2).</IndicationAndUsage>
<Description>Irbesartan is an angiotensin II receptor (AT1 subtype) antagonist. Irbesartan is a non-peptide compound, chemically described as a 2-butyl-3-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro[4.4]non-1-en-4-one. Its molecular formula is C25H28N6O, and the structural formula. Irbesartan, USP is a white to off-white crystalline powder with a molecular weight of 428.5. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan is slightly soluble in alcohol and in methylene chloride, practically insoluble in water. Each irbesartan tablet intended for oral administration contains 75 mg or 150 mg or 300 mg of irbesartan. In addition, each tablet contains the following inactive ingredients: calcium stearate, croscarmellose sodium, lactose monohydrate, microcrystalline cellulose, poloxamer and pregelatinized starch.</Description>
</NDC>
<NDC>
<NDCCode>68382-299-77</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (68382-299-77) > 10 TABLET in 1 BLISTER PACK (68382-299-30) </PackageDescription>
<NDC11Code>68382-0299-77</NDC11Code>
<ProductNDC>68382-299</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Irbesartan</ProprietaryName>
<NonProprietaryName>Irbesartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171208</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079213</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>IRBESARTAN</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171208</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Irbesartan tablets are an angiotensin II receptor blocker (ARB) indicated for: 1 Treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1), 2 Treatment of diabetic nephropathy in hypertensive patients with type 2 diabetes, an elevated serum creatinine, and proteinuria. (1.2).</IndicationAndUsage>
<Description>Irbesartan is an angiotensin II receptor (AT1 subtype) antagonist. Irbesartan is a non-peptide compound, chemically described as a 2-butyl-3-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro[4.4]non-1-en-4-one. Its molecular formula is C25H28N6O, and the structural formula. Irbesartan, USP is a white to off-white crystalline powder with a molecular weight of 428.5. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan is slightly soluble in alcohol and in methylene chloride, practically insoluble in water. Each irbesartan tablet intended for oral administration contains 75 mg or 150 mg or 300 mg of irbesartan. In addition, each tablet contains the following inactive ingredients: calcium stearate, croscarmellose sodium, lactose monohydrate, microcrystalline cellulose, poloxamer and pregelatinized starch.</Description>
</NDC>
<NDC>
<NDCCode>68682-299-10</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (68682-299-10) / 10 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>68682-0299-10</NDC11Code>
<ProductNDC>68682-299</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Loteprednol Etabonate</ProprietaryName>
<NonProprietaryName>Loteprednol Etabonate</NonProprietaryName>
<DosageFormName>SUSPENSION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20190701</StartMarketingDate>
<EndMarketingDate>20260531</EndMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020583</ApplicationNumber>
<LabelerName>Oceanside Pharmaceuticals</LabelerName>
<SubstanceName>LOTEPREDNOL ETABONATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20190701</StartMarketingDatePackage>
<EndMarketingDatePackage>20260531</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Loteprednol etabonate ophthalmic suspension is indicated for the treatment of steroid-responsive inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe such as allergic conjunctivitis, acne rosacea, superficial punctate keratitis, herpes zoster keratitis, iritis, cyclitis, selected infective conjunctivitides, when the inherent hazard of steroid use is accepted to obtain an advisable diminution in edema and inflammation. Loteprednol etabonate is less effective than prednisolone acetate 1% in two 28-day controlled clinical studies in acute anterior uveitis, where 72% of patients treated with loteprednol etabonate experienced resolution of anterior chamber cells, compared to 87% of patients treated with prednisolone acetate 1%. The incidence of patients with clinically significant increases in IOP (≥10 mmHg) was 1% with loteprednol etabonate and 6% with prednisolone acetate 1%. Loteprednol etabonate should not be used in patients who require a more potent corticosteroid for this indication. Loteprednol etabonate ophthalmic suspension is also indicated for the treatment of post-operative inflammation following ocular surgery.</IndicationAndUsage>
<Description>Loteprednol etabonate ophthalmic suspension contains a sterile, topical anti-inflammatory corticosteroid for ophthalmic use. Loteprednol etabonate is a white to off-white powder. Loteprednol etabonate is represented by the following structural formula. C 24H 31ClO 7 Mol. Wt. 466.96. Chemical Name. chloromethyl 17α-[(ethoxycarbonyl)oxy]-11β-hydroxy-3-oxoandrosta-1,4-diene-17β-carboxylate. Each mL contains. ACTIVE: Loteprednol Etabonate 5 mg (0.5%);. INACTIVES: Edetate Disodium, Glycerin, Povidone, Purified Water and Tyloxapol. Hydrochloric Acid and/or Sodium Hydroxide may be added to adjust the pH. The suspension is essentially isotonic with a tonicity of 250 to 310 mOsmol/kg. PRESERVATIVE ADDED: Benzalkonium Chloride 0.01%.</Description>
</NDC>
<NDC>
<NDCCode>71919-299-10</NDCCode>
<PackageDescription>100 mL in 1 BOTTLE, GLASS (71919-299-10) </PackageDescription>
<NDC11Code>71919-0299-10</NDC11Code>
<ProductNDC>71919-299</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Formica Rufa</ProprietaryName>
<NonProprietaryName>Formica Rufa</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100203</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>FORMICA RUFA</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-03-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>72189-299-10</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE (72189-299-10) </PackageDescription>
<NDC11Code>72189-0299-10</NDC11Code>
<ProductNDC>72189-299</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clarithromycin</ProprietaryName>
<NonProprietaryName>Clarithromycin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211202</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065136</ApplicationNumber>
<LabelerName>DirectRx</LabelerName>
<SubstanceName>CLARITHROMYCIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Macrolide Antimicrobial [EPC], Macrolides [CS], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1.1 Acute Bacterial Exacerbation of Chronic Bronchitis Clarithromycin tablets are indicated in adults for the treatment of mild to moderate infections caused by susceptible isolates due to Haemophilus influenzae, Haemophilus parainfluenzae, Moraxella catarrhalis, or Streptococcus pneumoniae [see Indications and Usage (1.9)]. 1.2 Acute Maxillary Sinusitis Clarithromycin tablets are indicated for the treatment of mild to moderate infections caused by susceptible isolates due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae [see Indications and Usage (1.9)]. 1.3 Community-Acquired Pneumonia Clarithromycin tablets are indicated [see Indications and Usage (1.9)] for the treatment of mild to moderate infections caused by susceptible isolates due to:. Haemophilus influenzae (in adults) Mycoplasma pneumoniae, Streptococcus pneumoniae, Chlamydophila pneumoniae (in adults and pediatric patients) 1.4 Pharyngitis/Tonsillitis Clarithromycin tablets are indicated for the treatment of mild to moderate infections caused by susceptible isolates due to Streptococcus pyogenes as an alternative in individuals who cannot use first line therapy. 1.5 Uncomplicated Skin and Skin Structure Infections Clarithromycin tablets are indicated for the treatment of mild to moderate infections caused by susceptible isolates due to Staphylococcus aureus, or Streptococcus pyogenes. 1.6 Acute Otitis Media Clarithromycin tablets are indicated in pediatric patients for the treatment of mild to moderate infections caused by susceptible isolates due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae [see Clinical Studies (14.2)]. 1.7 Treatment and Prophylaxis of Disseminated Mycobacterial Infections Clarithromycin tablets are indicated for the treatment of mild to moderate infections caused by susceptible isolates due to Mycobacterium avium or Mycobacterium intracellulare in patients with advanced HIV infection [see Clinical Studies (14.1)]. 1.8 Helicobacter pylori Infection and Duodenal Ulcer Disease Clarithromycin tablets are given in combination with other drugs in adults as described below to eradicate H. pylori. The eradication of H. pylori has been demonstrated to reduce the risk of duodenal ulcer recurrence [see Clinical Studies (14.3)]. Clarithromycin tablets in combination with amoxicillin and PREVACID (lansoprazole) or PRILOSEC (omeprazole) delayed-release capsules, as triple therapy, are indicated for the treatment of patients with H. pylori infection and duodenal ulcer disease (active or five-year history of duodenal ulcer) to eradicate H. pylori. Clarithromycin tablets in combination with PRILOSEC (omeprazole) capsules are indicated for the treatment of patients with an active duodenal ulcer associated with H. pylori infection. Regimens which contain clarithromycin tablets as the single antibacterial agent are more likely to be associated with the development of clarithromycin resistance among patients who fail therapy. Clarithromycin-containing regimens should not be used in patients with known or suspected clarithromycin resistant isolates because the efficacy of treatment is reduced in this setting. 1.9 Limitations of Use There is resistance to macrolides in certain bacterial infections caused by Streptococcus pneumoniae and Staphylococcus aureus. Susceptibility testing should be performed when clinically indicated. 1.10 Usage To reduce the development of drug-resistant bacteria and maintain the effectiveness of clarithromycin and other antibacterial drugs, clarithromycin tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Clarithromycin is a semi-synthetic macrolide antimicrobial for oral use. Chemically, it is 6-0‑ methylerythromycin. The molecular formula is C38H69NO13, and the molecular weight is 747.96. The structural formula is. chemicalstructure Figure 1: Structure of Clarithromycin. Clarithromycin is a white to off-white crystalline powder. It is soluble in acetone, slightly soluble in methanol, ethanol, and acetonitrile, and practically insoluble in water. Clarithromycin tablets, USP are intended for oral administration and contain 250 mg or 500 mg of clarithromycin, USP. In addition, each clarithromycin tablet contains the following inactive ingredients: croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>79903-299-10</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (79903-299-10) / 100 TABLET in 1 BOTTLE</PackageDescription>
<NDC11Code>79903-0299-10</NDC11Code>
<ProductNDC>79903-299</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Equate Pain Reliever</ProprietaryName>
<NonProprietaryName>Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241121</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M013</ApplicationNumber>
<LabelerName>WALMART INC.</LabelerName>
<SubstanceName>ACETAMINOPHEN</SubstanceName>
<StrengthNumber>325</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-12-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241121</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves minor aches and pains due to:. headache. muscular aches. backache. minor pain of arthritis. the common cold. toothache. premenstrual and menstrual cramps. temporarily reduces fever.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>87063-299-10</NDCCode>
<PackageDescription>10 SYRINGE, GLASS in 1 CARTON (87063-299-10) / .5 mL in 1 SYRINGE, GLASS (87063-299-01) </PackageDescription>
<NDC11Code>87063-0299-10</NDC11Code>
<ProductNDC>87063-299</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Flucelvax</ProprietaryName>
<NonProprietaryName>Influenza A Virus A/tasmania/318/2025 Cvr-351 (h1n1) Antigen (mdck Cell Derived, Propiolactone Inactivated), Influenza A Virus A/tasmania/787/2025 Cvr-388 (h3n2) Antigen (mdck Cell Derived, Propiolactone Inactivated), Influenza B Virus B/arizona/21/2025 Antigen (mdck Cell Derived, Propiolactone Inactivated)</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20260701</StartMarketingDate>
<EndMarketingDate>20270731</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125408</ApplicationNumber>
<LabelerName>ASCLEMED USA INC.</LabelerName>
<SubstanceName>INFLUENZA A VIRUS A/TASMANIA/318/2025 CVR-351 (H1N1) ANTIGEN (MDCK CELL DERIVED, PROPIOLACTONE INACTIVATED); INFLUENZA A VIRUS A/TASMANIA/787/2025 CVR-388 (H3N2) ANTIGEN (MDCK CELL DERIVED, PROPIOLACTONE INACTIVATED); INFLUENZA B VIRUS - B/ARIZONA/21/2025 ANTIGEN (MDCK CELL DERIVED, PROPIOLACTONE INACTIVATED)</SubstanceName>
<StrengthNumber>15; 15; 15</StrengthNumber>
<StrengthUnit>ug/.5mL; ug/.5mL; ug/.5mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-09-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20260701</StartMarketingDatePackage>
<EndMarketingDatePackage>20270731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>FLUCELVAX is an inactivated vaccine indicated for active immunization for the prevention of influenza disease caused by influenza virus subtypes A and type B contained in the vaccine. FLUCELVAX is approved for use in persons 6 months of age and older. [see Clinical Studies ( 14)].</IndicationAndUsage>
<Description>FLUCELVAX (Influenza Vaccine) is a trivalent subunit influenza vaccine manufactured using cell derived candidate vaccine viruses (CVV) that are propagated in Madin Darby Canine Kidney (MDCK) cells, a continuous cell line. These cells were adapted to grow freely in suspension in culture medium. The virus is inactivated with β-propiolactone, disrupted by the detergent cetyltrimethylammonium bromide and purified through several process steps. Each of the virus strains are produced and purified separately then pooled to formulate the vaccine. FLUCELVAX is a sterile, slightly opalescent injectable suspension in phosphate buffered saline which is administered intramuscularly. FLUCELVAX is formulated to contain a total of 45 micrograms (mcg) hemagglutinin (HA) per 0.5 mL dose in the recommended ratio of 15 mcg HA of each of the following influenza strains. A/Tasmania/318/2025 CVR-351 (an A/Missouri/11/2025 (H1N1)pdm09-like virus);. A/Tasmania/787/2025 CVR-388 (an A/Darwin/1415/2025 (H3N2)-like virus);. B/Arizona/21/2025 (a B/Pennsylvania/14/2025 (B-Victoria lineage)-like virus). These three influenza virus strains are recommended by FDA for the 2026-2027 influenza season. Each dose of FLUCELVAX may contain residual amounts of MDCK cell protein (≤ 21.6 mcg), protein other than HA (≤ 225 mcg), MDCK cell DNA (≤ 10 ng), polysorbate 80 (≤ 1125 mcg), cetyltrimethylammonium bromide (≤ 13.5 mcg), and β-propiolactone (< 0.5 mcg), which are used in the manufacturing process. FLUCELVAX contains no egg protein or antibiotics. FLUCELVAX 0.5 mL pre-filled syringes contain no preservative. FLUCELVAX 5 mL multi-dose vials contain thimerosal, a mercury derivative, added as a preservative. Each 0.5 mL dose from the multi-dose vial contains 25 mcg mercury. The tip caps and plungers of the pre-filled syringes and the multi-dose vial stopper are not made with natural rubber latex.</Description>
</NDC>
<NDC>
<NDCCode>0002-5137-11</NDCCode>
<PackageDescription>1 SYRINGE in 1 CARTON (0002-5137-11) / 3 mL in 1 SYRINGE (0002-5137-01) </PackageDescription>
<NDC11Code>00002-5137-11</NDC11Code>
<ProductNDC>0002-5137</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Onswik</ProprietaryName>
<ProprietaryNameSuffix>Kwikpen</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Efsitora Alfa-gobe</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20260923</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761408</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN EFSITORA ALFA</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-10-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260923</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ONSWIK is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Insulin efsitora alfa-gobe is a long-acting insulin analog that is divalent (dimer), consisting of a single-chain insulin (comprised of insulin B-chain analog, a short peptide linker, and an insulin A-chain analog) fused to a second peptide linker that is fused to a human IgG2 Fc region. Each monomer is comprised of 299 amino acid residues. Insulin efsitora alfa-gobe is produced using Chinese Hamster Ovary cells by recombinant DNA technology. The molecule contains 24-Cys residues that are involved in 2 interchain and 10 intrachain disulfide bonds. The predominant post-translational modification includes N-linked glycosylation of the heavy chain (Asn150). The molecular weight of insulin efsitora alfa-gobe is approximately 64 kDa. ONSWIK (insulin efsitora alfa-gobe) injection is a clear and colorless to yellow solution for subcutaneous use. ONSWIK injection is a sterile, preserved formulation supplied in two concentrations (500 units/mL or 1,000 units/mL) manufactured for use in a prefilled pen. Each mL of ONSWIK U-500 contains 500 units of insulin efsitora alfa-gobe and the inactive ingredients benzyl alcohol (9 mg), dibasic sodium phosphate (0.084 mg), glycerin (17 mg), monobasic sodium phosphate (0.53 mg), phenol (1.8 mg), poloxamer 188 (0.4 mg), and Water for Injection. The 500 units/mL cartridge delivers 5 units of ONSWIK per 0.01 mL (14.3 mg/mL). Each mL of ONSWIK U-1,000 contains 1,000 units of insulin efsitora alfa-gobe and the inactive ingredients benzyl alcohol (9 mg), dibasic sodium phosphate (0.168 mg), glycerin (17 mg), monobasic sodium phosphate (1.06 mg), phenol (1.8 mg), poloxamer 188 (0.4 mg), and Water for Injection. The 1,000 units/mL cartridge delivers 10 units of ONSWIK per 0.01 mL (28.6 mg/mL). Hydrochloric acid, glacial acetic acid and/or sodium hydroxide may be added to adjust the pH. ONSWIK has a pH of approximately 6.5.</Description>
</NDC>
<NDC>
<NDCCode>0002-5240-11</NDCCode>
<PackageDescription>1 SYRINGE in 1 CARTON (0002-5240-11) / 3 mL in 1 SYRINGE (0002-5240-01) </PackageDescription>
<NDC11Code>00002-5240-11</NDC11Code>
<ProductNDC>0002-5240</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Onswik</ProprietaryName>
<ProprietaryNameSuffix>Kwikpen</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Efsitora Alfa-gobe</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20260923</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761408</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN EFSITORA ALFA</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-10-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260923</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ONSWIK is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Insulin efsitora alfa-gobe is a long-acting insulin analog that is divalent (dimer), consisting of a single-chain insulin (comprised of insulin B-chain analog, a short peptide linker, and an insulin A-chain analog) fused to a second peptide linker that is fused to a human IgG2 Fc region. Each monomer is comprised of 299 amino acid residues. Insulin efsitora alfa-gobe is produced using Chinese Hamster Ovary cells by recombinant DNA technology. The molecule contains 24-Cys residues that are involved in 2 interchain and 10 intrachain disulfide bonds. The predominant post-translational modification includes N-linked glycosylation of the heavy chain (Asn150). The molecular weight of insulin efsitora alfa-gobe is approximately 64 kDa. ONSWIK (insulin efsitora alfa-gobe) injection is a clear and colorless to yellow solution for subcutaneous use. ONSWIK injection is a sterile, preserved formulation supplied in two concentrations (500 units/mL or 1,000 units/mL) manufactured for use in a prefilled pen. Each mL of ONSWIK U-500 contains 500 units of insulin efsitora alfa-gobe and the inactive ingredients benzyl alcohol (9 mg), dibasic sodium phosphate (0.084 mg), glycerin (17 mg), monobasic sodium phosphate (0.53 mg), phenol (1.8 mg), poloxamer 188 (0.4 mg), and Water for Injection. The 500 units/mL cartridge delivers 5 units of ONSWIK per 0.01 mL (14.3 mg/mL). Each mL of ONSWIK U-1,000 contains 1,000 units of insulin efsitora alfa-gobe and the inactive ingredients benzyl alcohol (9 mg), dibasic sodium phosphate (0.168 mg), glycerin (17 mg), monobasic sodium phosphate (1.06 mg), phenol (1.8 mg), poloxamer 188 (0.4 mg), and Water for Injection. The 1,000 units/mL cartridge delivers 10 units of ONSWIK per 0.01 mL (28.6 mg/mL). Hydrochloric acid, glacial acetic acid and/or sodium hydroxide may be added to adjust the pH. ONSWIK has a pH of approximately 6.5.</Description>
</NDC>
<NDC>
<NDCCode>0054-0210-25</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (0054-0210-25) </PackageDescription>
<NDC11Code>00054-0210-25</NDC11Code>
<ProductNDC>0054-0210</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Protriptyline Hydrochloride</ProprietaryName>
<NonProprietaryName>Protriptyline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080916</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078913</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>PROTRIPTYLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-04-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080916</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Protriptyline hydrochloride is indicated for the treatment of symptoms of mental depression in patients who are under close medical supervision. Its activating properties make it particularly suitable for withdrawn and anergic patients.</IndicationAndUsage>
<Description>Protriptyline HCl is N-methyl-5H dibenzo[a,d]-cycloheptene-5-propanamine hydrochloride. Its molecular formula is C19H21NHCl and its structural formula is. Protriptyline hydrochloride, a dibenzocycloheptene derivative, has a molecular weight of 299.84. It is a white crystalline powder that is freely soluble in water and soluble in dilute HCl. Protriptyline Hydrochloride Tablets, USP are available for oral administration containing either 5 mg or 10 mg of protriptyline hydrochloride, USP. Each tablet contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, magnesium stearate and microcrystalline cellulose.</Description>
</NDC>
<NDC>
<NDCCode>0054-0211-25</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (0054-0211-25) </PackageDescription>
<NDC11Code>00054-0211-25</NDC11Code>
<ProductNDC>0054-0211</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Protriptyline Hydrochloride</ProprietaryName>
<NonProprietaryName>Protriptyline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080916</StartMarketingDate>
<EndMarketingDate>20251031</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078913</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>PROTRIPTYLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20080916</StartMarketingDatePackage>
<EndMarketingDatePackage>20251031</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Protriptyline hydrochloride is indicated for the treatment of symptoms of mental depression in patients who are under close medical supervision. Its activating properties make it particularly suitable for withdrawn and anergic patients.</IndicationAndUsage>
<Description>Protriptyline HCl is N-methyl-5H dibenzo[a,d]-cycloheptene-5-propanamine hydrochloride. Its molecular formula is C19H21NHCl and its structural formula is. Protriptyline hydrochloride, a dibenzocycloheptene derivative, has a molecular weight of 299.84. It is a white crystalline powder that is freely soluble in water and soluble in dilute HCl. Protriptyline Hydrochloride Tablets, USP are available for oral administration containing either 5 mg or 10 mg of protriptyline hydrochloride, USP. Each tablet contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, magnesium stearate and microcrystalline cellulose.</Description>
</NDC>
<NDC>
<NDCCode>0093-0810-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (0093-0810-01) </PackageDescription>
<NDC11Code>00093-0810-01</NDC11Code>
<ProductNDC>0093-0810</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nortriptyline Hydrochloride</ProprietaryName>
<NonProprietaryName>Nortriptyline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19950405</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074132</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>NORTRIPTYLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19950405</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nortriptyline hydrochloride capsules are indicated for the relief of symptoms of depression. Endogenous depressions are more likely to be alleviated than are other depressive states.</IndicationAndUsage>
<Description>Nortriptyline hydrochloride, USP is 1-propanamine, 3-(10,11-dihydro-5H-dibenzo[a,d]cyclohepten-5-ylidene)-N-methyl-, hydrochloride. The structural formula is as follows. C19H21NHCl M.W. 299.84. Nortriptyline hydrochloride, USP is a white to off-white powder, having a slight, characteristic odor. It is soluble in water and in chloroform; sparingly soluble in methanol; and practically insoluble in most organic solvents. Each capsule, for oral administration, contains nortriptyline hydrochloride, USP equivalent to 10 mg, 25 mg, 50 mg or 75 mg nortriptyline. In addition, each capsule contains the following inactive ingredients: corn starch, dimethicone, gelatin, iron oxide black, potassium hydroxide, propylene glycol, shellac glaze, sodium lauryl sulfate, strong ammonia solution, and titanium dioxide. The 10 mg, 25 mg and 75 mg capsules also contain D&C Yellow No. 10, FD&C Blue No. 1, and FD&C Yellow No. 6.</Description>
</NDC>
</NDCList>