RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>82667-200-01</NDCCode>
    <PackageDescription>12 POUCH in 1 CARTON (82667-200-01)  / 2 VIAL, SINGLE-DOSE in 1 POUCH / .1 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>82667-0200-01</NDC11Code>
    <ProductNDC>82667-200</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Iopidine 1%</ProprietaryName>
    <NonProprietaryName>Apraclonidine Hydrochloride Ophthalmic Solution</NonProprietaryName>
    <DosageFormName>SOLUTION/ DROPS</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>20230801</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA019779</ApplicationNumber>
    <LabelerName>Harrow Eye, LLC</LabelerName>
    <SubstanceName>APRACLONIDINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-05-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230801</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>IOPIDINE 1% Ophthalmic Solution is indicated to control or prevent post-surgical elevations in IOP that occur in patients after argon laser trabeculoplasty, argon laser iridotomy or Nd:YAG posterior capsulotomy.</IndicationAndUsage>
    <Description>IOPIDINE 1% Ophthalmic Solution contains apraclonidine hydrochloride, an alpha adrenergic agonist, in a sterile isotonic solution for topical application to the eye. Apraclonidine hydrochloride is a white to off‑white powder and is highly soluble in water. Its chemical name is 2-[(4‑amino-2,6 dichlorophenyl)imino] imidazolidine monohydrochloride with an empirical formula of C 9H 11Cl 3N 4and a molecular weight of 281.6. The chemical structure of apraclonidine hydrochloride is:. Each mL of IOPIDINE 1% Ophthalmic Solution contains:. Actives: apraclonidine hydrochloride 11.5 mg equivalent to apraclonidine base 10 mg. Inactives:sodium chloride, sodium acetate, sodium hydroxide and/or hydrochloric acid (pH 4.4‑7.8), purified water and benzalkonium chloride 0.01% (preservative). Osmolality is 260‑320 mOsm.</Description>
  </NDC>
  <NDC>
    <NDCCode>82667-200-05</NDCCode>
    <PackageDescription>5 POUCH in 1 CARTON (82667-200-05)  / 5 VIAL, SINGLE-DOSE in 1 POUCH / .1 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>82667-0200-05</NDC11Code>
    <ProductNDC>82667-200</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Iopidine 1%</ProprietaryName>
    <NonProprietaryName>Apraclonidine Hydrochloride Ophthalmic Solution</NonProprietaryName>
    <DosageFormName>SOLUTION/ DROPS</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>20230801</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA019779</ApplicationNumber>
    <LabelerName>Harrow Eye, LLC</LabelerName>
    <SubstanceName>APRACLONIDINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-05-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260501</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>IOPIDINE 1% Ophthalmic Solution is indicated to control or prevent post-surgical elevations in IOP that occur in patients after argon laser trabeculoplasty, argon laser iridotomy or Nd:YAG posterior capsulotomy.</IndicationAndUsage>
    <Description>IOPIDINE 1% Ophthalmic Solution contains apraclonidine hydrochloride, an alpha adrenergic agonist, in a sterile isotonic solution for topical application to the eye. Apraclonidine hydrochloride is a white to off‑white powder and is highly soluble in water. Its chemical name is 2-[(4‑amino-2,6 dichlorophenyl)imino] imidazolidine monohydrochloride with an empirical formula of C 9H 11Cl 3N 4and a molecular weight of 281.6. The chemical structure of apraclonidine hydrochloride is:. Each mL of IOPIDINE 1% Ophthalmic Solution contains:. Actives: apraclonidine hydrochloride 11.5 mg equivalent to apraclonidine base 10 mg. Inactives:sodium chloride, sodium acetate, sodium hydroxide and/or hydrochloric acid (pH 4.4‑7.8), purified water and benzalkonium chloride 0.01% (preservative). Osmolality is 260‑320 mOsm.</Description>
  </NDC>
  <NDC>
    <NDCCode>82667-010-01</NDCCode>
    <PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (82667-010-01)  / 5 mL in 1 BOTTLE, PLASTIC</PackageDescription>
    <NDC11Code>82667-0010-01</NDC11Code>
    <ProductNDC>82667-010</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Flarex</ProprietaryName>
    <NonProprietaryName>Fluorometholone Acetate</NonProprietaryName>
    <DosageFormName>SUSPENSION/ DROPS</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>20250331</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA019079</ApplicationNumber>
    <LabelerName>Harrow Eye, LLC</LabelerName>
    <SubstanceName>FLUOROMETHOLONE ACETATE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-04-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250331</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>FLAREX (fluorometholone acetate ophthalmic suspension) 0.1% is indicated for use in the treatment of steroid responsive inflammatory conditions of the palpebral and bulbar conjunctiva, cornea, and anterior segment of the eye.</IndicationAndUsage>
    <Description>FLAREX ®(fluorometholone acetate ophthalmic suspension) 0.1% is a corticosteroid prepared as a sterile topical ophthalmic suspension. The active ingredient, fluorometholone acetate, is a white to creamy white powder with an empirical formula of C 24H 31FO 5and a molecular weight of 418.5. Its chemical name is 9-fluoro-11β, 17-dihydroxy-6α-methylpregna-1, 4-diene-3, 20-dione 17-acetate. The chemical structure of Fluorometholone Acetate is presented below:. Each mL of FLAREX (fluorometholone acetate ophthalmic suspension) 0.1% contains:Active:fluorometholone acetate 1 mg (0.1%). Preservative:benzalkonium chloride 0.01%. Inactives:sodium chloride, monobasic sodium phosphate, edetate disodium, hydroxyethyl cellulose, tyloxapol, hydrochloric acid and/or sodium hydroxide (to adjust pH), and purified water. The pH of the suspension is approximately 7.3, with an osmolality of approximately 300 mOsm/kg.</Description>
  </NDC>
  <NDC>
    <NDCCode>82667-014-01</NDCCode>
    <PackageDescription>24 POUCH in 1 CARTON (82667-014-01)  / 5 VIAL, SINGLE-DOSE in 1 POUCH / .3 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>82667-0014-01</NDC11Code>
    <ProductNDC>82667-014</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Verkazia</ProprietaryName>
    <NonProprietaryName>Cyclosporine</NonProprietaryName>
    <DosageFormName>EMULSION</DosageFormName>
    <RouteName>OPHTHALMIC; TOPICAL</RouteName>
    <StartMarketingDate>20220201</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA214965</ApplicationNumber>
    <LabelerName>Harrow Eye, LLC</LabelerName>
    <SubstanceName>CYCLOSPORINE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Verkazia ophthalmic emulsion is indicated for the treatment of vernal keratoconjunctivitis (VKC) in children and adults.</IndicationAndUsage>
    <Description>Verkazia (cyclosporine ophthalmic emulsion) 0.1% contains a topical calcineurin inhibitor immunosuppressant. Cyclosporine is a white or almost white powder. Cyclosporine’s chemical name is Cyclo[[( E)-(2 S,3 R,4 R)-3-hydroxy-4-methyl-2-(methylamino)-6-octenoyl]-L-2-aminobutyryl- N-methylglycyl- N-methyl-L-leucyl-L-valyl- N-methyl-L-leucyl-L-alanyl-D-alanyl- N-methyl-L-leucyl- N-methyl-L-leucyl- N-methyl-L-valyl] and it has the following structure:. Structural Formula. Formula: C 62H 111N 11O 12Mol. Wt.: 1202.61. Verkazia ophthalmic emulsion is a sterile, unpreserved topical emulsion. It appears as a milky-white homogeneous emulsion. It has an osmolality of approximately 265 mOsmol/kg and a pH of 5-7. Each mL of Verkazia ophthalmic emulsion contains: Active: Cyclosporine 1 mg/mL. Inactives: Cetalkonium chloride, Glycerol, Medium-chain triglycerides, Poloxamer 188, Sodium Hydroxide to adjust pH, Tyloxapol and Water for Injection.</Description>
  </NDC>
  <NDC>
    <NDCCode>82667-300-01</NDCCode>
    <PackageDescription>1 POUCH in 1 CARTON (82667-300-01)  / 1 VIAL in 1 POUCH / 800 mg in 1 VIAL</PackageDescription>
    <NDC11Code>82667-0300-01</NDC11Code>
    <ProductNDC>82667-300</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Iheezo</ProprietaryName>
    <NonProprietaryName>Chloroprocaine Hydrochloride Ophthalmic Gel</NonProprietaryName>
    <DosageFormName>GEL</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>20220927</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA216227</ApplicationNumber>
    <LabelerName>Harrow Eye, LLC</LabelerName>
    <SubstanceName>CHLOROPROCAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>24</StrengthNumber>
    <StrengthUnit>mg/800mg</StrengthUnit>
    <Pharm_Classes>Ester Local Anesthetic [EPC], Esters [CS], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220927</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>IHEEZO TMis indicated for ocular surface anesthesia.</IndicationAndUsage>
    <Description>IHEEZO TMis a sterile, single-patient‑use ophthalmic gel preparation for topical ocular anesthesia containing chloroprocaine hydrochloride as the active pharmaceutical ingredient. Chloroprocaine hydrochloride is an ester anesthetic. It is a water-soluble white crystalline powder and its chemical name is 2-(Diethylamino)ethyl 4‑amino-2-chlorobenzoate monohydrochloride. The molecular weight is 307.22 and the molecular formula is C 13H 19ClN 2O 2·HCl. It is represented by the following structural formula:. IHEEZO TMcontains:. Active: 30 mg of chloroprocaine hydrochloride (equivalent to 26 mg of chloroprocaine) per gram of gel. Inactive ingredients: Hydroxyethyl Cellulose (HEC), and Water for Injection. The pH may be adjusted to 3.0 to 5.0 with Hydrochloric Acid. This product does not contain an antimicrobial preservative.</Description>
  </NDC>
  <NDC>
    <NDCCode>82667-800-01</NDCCode>
    <PackageDescription>1 BLISTER PACK in 1 CARTON (82667-800-01)  / 1 VIAL, GLASS in 1 BLISTER PACK / 1 mL in 1 VIAL, GLASS</PackageDescription>
    <NDC11Code>82667-0800-01</NDC11Code>
    <ProductNDC>82667-800</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Triesence</ProprietaryName>
    <NonProprietaryName>Triamcinolone Acetonide</NonProprietaryName>
    <DosageFormName>INJECTION, SUSPENSION</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>20241001</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA022048</ApplicationNumber>
    <LabelerName>Harrow Eye, LLC</LabelerName>
    <SubstanceName>TRIAMCINOLONE ACETONIDE</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241001</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>TRIESENCE suspension is a synthetic corticosteroid indicated for:.  Treatment of the following ophthalmic diseases: sympathetic ophthalmia, temporal arteritis, uveitis, and ocular inflammatory conditions unresponsive to topical corticosteroids. ( 1.1).  Visualization during vitrectomy. ( 1.2).</IndicationAndUsage>
    <Description>TRIESENCE (triamcinolone acetonide injectable suspension) 40 mg/mL is a synthetic corticosteroid with anti-inflammatory action. Each mL of the sterile, aqueous suspension provides 40 mg of triamcinolone acetonide, with sodium chloride for isotonicity, 0.5% (w/v) carboxymethylcellulose sodium and 0.015% polysorbate 80. It also contains calcium chloride (dihydrate), magnesium chloride (hexahydrate), potassium chloride, sodium acetate (trihydrate), sodium citrate (dihydrate) and water for injection. Sodium hydroxide and hydrochloric acid may be present to adjust pH to a target value 6 - 7.5. The chemical name for triamcinolone acetonide is 9-Fluro- 11β, 16α, 17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17- acetal with acetone. Its structural formula of C 24H 31FO 6is:. 434.50 g/mol Molecular Weight. Triamcinolone acetonide occurs as a white to cream-colored, crystalline powder having not more than a slight odor and is practically insoluble in water and very soluble in alcohol.</Description>
  </NDC>
  <NDC>
    <NDCCode>0003-1968-01</NDCCode>
    <PackageDescription>200 mL in 1 BOTTLE (0003-1968-01) </PackageDescription>
    <NDC11Code>00003-1968-01</NDC11Code>
    <ProductNDC>0003-1968</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Zerit</ProprietaryName>
    <NonProprietaryName>Stavudine</NonProprietaryName>
    <DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170613</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020413</ApplicationNumber>
    <LabelerName>E.R. Squibb &amp; Sons, L.L.C.</LabelerName>
    <SubstanceName>STAVUDINE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC],Nucleoside Analog [EXT],Nucleoside Reverse Transcriptase Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-08-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170613</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>0009-5139-01</NDCCode>
    <PackageDescription>200 mL in 1 BAG (0009-5139-01)</PackageDescription>
    <NDC11Code>00009-5139-01</NDC11Code>
    <ProductNDC>0009-5139</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Zyvox</ProprietaryName>
    <NonProprietaryName>Linezolid</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20000418</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021131</ApplicationNumber>
    <LabelerName>Pharmacia and Upjohn Company LLC</LabelerName>
    <SubstanceName>LINEZOLID</SubstanceName>
    <StrengthNumber>400</StrengthNumber>
    <StrengthUnit>mg/200mL</StrengthUnit>
    <Pharm_Classes>Oxazolidinone Antibacterial [EPC],Oxazolidinones [Chemical/Ingredient]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-02-27</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>0069-1415-02</NDCCode>
    <PackageDescription>1 BOTTLE, GLASS in 1 CARTON (0069-1415-02)  / 200 mL in 1 BOTTLE, GLASS (0069-1415-01) </PackageDescription>
    <NDC11Code>00069-1415-02</NDC11Code>
    <ProductNDC>0069-1415</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Panzyga</ProprietaryName>
    <NonProprietaryName>Immune Globulin Intravenous (human)</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20190809</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125587</ApplicationNumber>
    <LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
    <SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190809</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Immune Globulin Intravenous (Human), PANZYGA, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. PANZYGA is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%), of which not less than 96% is normal human immunoglobulin G. PANZYGA contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 4% fragments. On average, the product contains 100 µg/mL of IgA, and lower amounts of IgM. PANZYGA contains only trace amounts of sodium, and the pH is between 4.5 and 5.0. The osmolality is in the range of 240-310 mosmol/kg. The manufacturing process for PANZYGA isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. PANZYGA contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 28%, IgG 3 is 3% and IgG 4 is 4%. PANZYGA contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. PANZYGA contains glycine (15.0-19.5 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of PANZYGA are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by purification methodologies, as well as S/D treatment and nanofiltration (20 nm). The S/D mixture used is composed of tri-n-butyl phosphate (TNBP, solvent) and Triton X-100 (Octoxynol, detergent). The PANZYGA manufacturing process shows significant viral reduction and inactivation, demonstrated by in vitro infectivity studies ( Table 4 ). The virus safety of PANZYGA is achieved through a combination of various process steps, including S/D treatment, ion-exchange chromatography, and nanofiltration (20 nm). Table 4 shows the virus clearance during the manufacturing process for PANZYGA, expressed as the mean log 10 reduction factor (LRF). Table 4: Virus Reduction by PANZYGA Manufacturing Process. HIV-1: Human Immunodeficiency Virus – 1, a model for HIV-1 and HIV-2;. PRV: Pseudorabies Virus, a model for large enveloped DNA viruses (e.g., herpes virus);. BVDV: Bovine Viral Diarrhea Virus, a model for e.g., Hepatitis C virus (HCV) and West-Nile virus (WNV);. MEV: Mouse Encephalomyelitis virus, a model for Hepatitis A virus (HAV);. PPV: Porcine Parvovirus, a model for Human Parvovirus B19;. n.a.: not applicable;. n.d: not done. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents. [ 10 ]. Several of the individual production steps in the PANZYGA manufacturing process were shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include ion-exchange chromatography and nanofiltration, which together give a total of at least 10.4 log10 decrease of infectivity. These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed.</Description>
  </NDC>
  <NDC>
    <NDCCode>0069-6237-01</NDCCode>
    <PackageDescription>200 mL in 1 BOTTLE, GLASS (0069-6237-01) </PackageDescription>
    <NDC11Code>00069-6237-01</NDC11Code>
    <ProductNDC>0069-6237</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Octagam Immune Globulin (human)</ProprietaryName>
    <NonProprietaryName>Immune Globulin</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20231113</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125062</ApplicationNumber>
    <LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
    <SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-01-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231113</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Octagam 10% is an immune globulin intravenous (human) liquid preparation indicated for the treatment of. Chronic immune thrombocytopenic purpura (ITP) in adults ( 1.1 ). Dermatomyositis (DM) in adults ( 1.2 ).</IndicationAndUsage>
    <Description>Immune Globulin Intravenous (Human), Octagam 10%, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. Octagam 10% is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%) of which not less than 96% is normal human immunoglobulin G. Octagam 10% contains not more than 3% aggregates, not less than 94% monomers and dimers and not more than 3% fragments. On average, the product contains 106 µg/mL of IgA and even lower amounts of IgM. The sodium content of the final solution is not more than 30 mmol/L and the pH is between 4.5 and 5.0. The osmolality is 310 - 380 mosmol/kg. The manufacturing process for Octagam 10% isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact Octagam 10% contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 30%, IgG 3 is 3% and IgG 4 is 2%. Octagam 10% contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. It contains maltose (90 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of Octagam 10% are provided by FDA-approved blood establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV-1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by ultrafiltration and chromatography. The manufacturing process includes treatment with an organic S/D mixture composed of tri-n-butyl phosphate (TNBP) and Triton X-100 (Octoxynol). The Octagam 10% manufacturing process shows significant viral reduction in in vitro studies (Table 6). These reductions are achieved through a combination of process steps including cold ethanol fractionation, S/D treatment and pH 4 treatment. Table 6: In vitro reduction factor during Octagam 10% manufacturing. *not calculated for global LRF. HIV-1: Human Immunodeficiency Virus - 1. PRV: Pseudorabies Virus. SBV: Sindbis Virus. MEV: Mouse Encephalomyelitis Virus. PPV: Porcine Parvovirus.</Description>
  </NDC>
  <NDC>
    <NDCCode>0069-6237-02</NDCCode>
    <PackageDescription>1 BOTTLE, GLASS in 1 CARTON (0069-6237-02)  / 200 mL in 1 BOTTLE, GLASS (0069-6237-01) </PackageDescription>
    <NDC11Code>00069-6237-02</NDC11Code>
    <ProductNDC>0069-6237</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Octagam Immune Globulin (human)</ProprietaryName>
    <NonProprietaryName>Immune Globulin</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20231113</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125062</ApplicationNumber>
    <LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
    <SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-01-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231113</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Octagam 10% is an immune globulin intravenous (human) liquid preparation indicated for the treatment of. Chronic immune thrombocytopenic purpura (ITP) in adults ( 1.1 ). Dermatomyositis (DM) in adults ( 1.2 ).</IndicationAndUsage>
    <Description>Immune Globulin Intravenous (Human), Octagam 10%, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. Octagam 10% is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%) of which not less than 96% is normal human immunoglobulin G. Octagam 10% contains not more than 3% aggregates, not less than 94% monomers and dimers and not more than 3% fragments. On average, the product contains 106 µg/mL of IgA and even lower amounts of IgM. The sodium content of the final solution is not more than 30 mmol/L and the pH is between 4.5 and 5.0. The osmolality is 310 - 380 mosmol/kg. The manufacturing process for Octagam 10% isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact Octagam 10% contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 30%, IgG 3 is 3% and IgG 4 is 2%. Octagam 10% contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. It contains maltose (90 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of Octagam 10% are provided by FDA-approved blood establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV-1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by ultrafiltration and chromatography. The manufacturing process includes treatment with an organic S/D mixture composed of tri-n-butyl phosphate (TNBP) and Triton X-100 (Octoxynol). The Octagam 10% manufacturing process shows significant viral reduction in in vitro studies (Table 6). These reductions are achieved through a combination of process steps including cold ethanol fractionation, S/D treatment and pH 4 treatment. Table 6: In vitro reduction factor during Octagam 10% manufacturing. *not calculated for global LRF. HIV-1: Human Immunodeficiency Virus - 1. PRV: Pseudorabies Virus. SBV: Sindbis Virus. MEV: Mouse Encephalomyelitis Virus. PPV: Porcine Parvovirus.</Description>
  </NDC>
  <NDC>
    <NDCCode>0069-8476-01</NDCCode>
    <PackageDescription>200 mL in 1 BOTTLE, GLASS (0069-8476-01) </PackageDescription>
    <NDC11Code>00069-8476-01</NDC11Code>
    <ProductNDC>0069-8476</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Octagam Immune Globulin (human)</ProprietaryName>
    <NonProprietaryName>Immune Globulin</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20231113</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125062</ApplicationNumber>
    <LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
    <SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-01-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231113</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Octagam is an immune globulin intravenous (human), 5% liquid, indicated for treatment of primary humoral immunodeficiency (PI) ( 1 ).</IndicationAndUsage>
    <Description>Immune Globulin Intravenous (Human), Octagam 5% liquid, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. Octagam 5% liquid is a solution for infusion which must be administered intravenously. All units of human plasma used in the manufacture of Octagam 5% liquid are provided by FDA-approved blood establishments only, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV-1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by ultrafiltration and chromatography. The manufacturing process includes treatment with an organic S/D mixture composed of tri-n-butyl phosphate (TNBP) and Triton X-100 (Octoxynol). The Octagam 5% liquid manufacturing process provides a significant viral reduction in in vitro studies (Table 3). These reductions are achieved through a combination of process steps including cold ethanol fractionation, S/D treatment and pH 4 treatment. Table 3: In vitro reduction factor during Octagam 5% liquid manufacturing. *not calculated for global LRF. HIV-1: Human Immunodeficiency Virus - 1. PRV: Pseudorabies Virus. SBV: Sindbis Virus. MEV: Mouse Encephalomyelitis Virus. PPV: Porcine Parvovirus.</Description>
  </NDC>
  <NDC>
    <NDCCode>0069-8476-02</NDCCode>
    <PackageDescription>1 BOTTLE, GLASS in 1 CARTON (0069-8476-02)  / 200 mL in 1 BOTTLE, GLASS (0069-8476-01) </PackageDescription>
    <NDC11Code>00069-8476-02</NDC11Code>
    <ProductNDC>0069-8476</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Octagam Immune Globulin (human)</ProprietaryName>
    <NonProprietaryName>Immune Globulin</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20231113</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125062</ApplicationNumber>
    <LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
    <SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-01-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231113</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Octagam is an immune globulin intravenous (human), 5% liquid, indicated for treatment of primary humoral immunodeficiency (PI) ( 1 ).</IndicationAndUsage>
    <Description>Immune Globulin Intravenous (Human), Octagam 5% liquid, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. Octagam 5% liquid is a solution for infusion which must be administered intravenously. All units of human plasma used in the manufacture of Octagam 5% liquid are provided by FDA-approved blood establishments only, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV-1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by ultrafiltration and chromatography. The manufacturing process includes treatment with an organic S/D mixture composed of tri-n-butyl phosphate (TNBP) and Triton X-100 (Octoxynol). The Octagam 5% liquid manufacturing process provides a significant viral reduction in in vitro studies (Table 3). These reductions are achieved through a combination of process steps including cold ethanol fractionation, S/D treatment and pH 4 treatment. Table 3: In vitro reduction factor during Octagam 5% liquid manufacturing. *not calculated for global LRF. HIV-1: Human Immunodeficiency Virus - 1. PRV: Pseudorabies Virus. SBV: Sindbis Virus. MEV: Mouse Encephalomyelitis Virus. PPV: Porcine Parvovirus.</Description>
  </NDC>
  <NDC>
    <NDCCode>0085-1132-01</NDCCode>
    <PackageDescription>1 CANISTER in 1 CARTON (0085-1132-01)  &gt; 200 AEROSOL, METERED in 1 CANISTER</PackageDescription>
    <NDC11Code>00085-1132-01</NDC11Code>
    <ProductNDC>0085-1132</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Proventil Hfa</ProprietaryName>
    <NonProprietaryName>Albuterol Sulfate</NonProprietaryName>
    <DosageFormName>AEROSOL, METERED</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>20011001</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020503</ApplicationNumber>
    <LabelerName>Merck Sharp &amp; Dohme Corp.</LabelerName>
    <SubstanceName>ALBUTEROL SULFATE</SubstanceName>
    <StrengthNumber>108</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Adrenergic beta2-Agonists [MoA],beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-10-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20011001</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>0143-9196-12</NDCCode>
    <PackageDescription>12 BAG in 1 CASE (0143-9196-12)  / 200 mL in 1 BAG (0143-9196-01) </PackageDescription>
    <NDC11Code>00143-9196-12</NDC11Code>
    <ProductNDC>0143-9196</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20251107</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211907</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251107</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ropivacaine hydrochloride injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
    <Description>Ropivacaine hydrochloride injection is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride injection is administered parenterally by infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHCl                                               M.W. 310.87. At 25°C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection is a clear, colorless, and preservative-free solution. Each mL contains 2.0 mg or 5.0 mg of ropivacaine hydrochloride anhydrous, and 8.6 mg or 7.8 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of ropivacaine hydrochloride injection solution ranges from 1.002 to 1.005 at 25°C.</Description>
  </NDC>
  <NDC>
    <NDCCode>0143-9364-10</NDCCode>
    <PackageDescription>10 BAG in 1 BOX (0143-9364-10)  / 200 mL in 1 BAG (0143-9364-01) </PackageDescription>
    <NDC11Code>00143-9364-10</NDC11Code>
    <ProductNDC>0143-9364</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Labetalol Hcl In Sodium Chloride</ProprietaryName>
    <NonProprietaryName>Labetalol Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20201109</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA213330</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>LABETALOL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201109</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Labetalol HCl Injection is indicated in severe hypertension, to lower blood pressure.</IndicationAndUsage>
    <Description>Labetalol HCl in Sodium Chloride Injection, Labetalol HCl in Dextrose Injection and Labetalol Hydrochloride Injection, USP contain labetalol HCl an adrenergic receptor blocking agent that has both selective alpha1-adrenergic and nonselective beta-adrenergic receptor blocking actions. Labetalol hydrochloride (HCl) is a racemate chemically designated as 5-[1-Hydroxy-2-[(1-methyl-3-phenylpropyl)amino]ethyl]-salicylamide monohydrochloride and it has the following structural formula. Labetalol HCl is a white or off-white crystalline powder, soluble in water. Labetalol HCl has the molecular formula C19H24N2O3HCl and a molecular weight of 364.87. It has two asymmetric centers and therefore exists as a molecular complex of two diastereoisomeric pairs. Labetalol HCl in Sodium Chloride Injection and Labetalol HCl in Dextrose Injection are two preservative-free, ready- to use formulations of labetalol. Labetalol HCl in Sodium Chloride Injection and Labetalol HCl in Dextrose Injection are clear, colorless to pale yellow, aqueous, sterile, isotonic solution for intravenous injection. Each milliliter of Labetalol HCl in Sodium Chloride Injection contains 1 mg of labetalol HCl, 7.2 mg sodium chloride, 9 mg of anhydrous dextrose, 0.02 mg of edetate disodium; and citric acid monohydrate and sodium hydroxide, as necessary, to bring the solution into the pH range of 3.5 to 4.5. Each milliliter of Labetalol HCl in Dextrose Injection contains 1 mg of labetalol HCl, 45 mg of anhydrous dextrose, 0.02 mg of edetate disodium; and citric acid monohydrate and sodium hydroxide, as necessary, to bring the solution into the pH range of 3.5 to 4.5. Labetalol Hydrochloride Injection prefilled syringe and vial are two preservative-free, ready-to use formulations of labetalol. Labetalol Hydrochloride Injection is a clear, colorless to pale yellow, aqueous, sterile, isotonic solution for intravenous injection. Each milliliter of Labetalol Hydrochloride Injection, USP, contains 5 mg of labetalol HCI, 45 mg of anhydrous dextrose, 0.1 mg of edetate disodium, and citric acid monohydrate and sodium hydroxide, as necessary, to bring the solution into the pH range of 3.0 to 4.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>0143-9366-10</NDCCode>
    <PackageDescription>10 BAG in 1 BOX (0143-9366-10)  / 200 mL in 1 BAG (0143-9366-01) </PackageDescription>
    <NDC11Code>00143-9366-10</NDC11Code>
    <ProductNDC>0143-9366</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Labetalol Hcl In Dextrose</ProprietaryName>
    <NonProprietaryName>Labetalol Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20201109</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA213330</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>LABETALOL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201109</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Labetalol HCl Injection is indicated in severe hypertension, to lower blood pressure.</IndicationAndUsage>
    <Description>Labetalol HCl in Sodium Chloride Injection, Labetalol HCl in Dextrose Injection and Labetalol Hydrochloride Injection, USP contain labetalol HCl an adrenergic receptor blocking agent that has both selective alpha1-adrenergic and nonselective beta-adrenergic receptor blocking actions. Labetalol hydrochloride (HCl) is a racemate chemically designated as 5-[1-Hydroxy-2-[(1-methyl-3-phenylpropyl)amino]ethyl]-salicylamide monohydrochloride and it has the following structural formula. Labetalol HCl is a white or off-white crystalline powder, soluble in water. Labetalol HCl has the molecular formula C19H24N2O3HCl and a molecular weight of 364.87. It has two asymmetric centers and therefore exists as a molecular complex of two diastereoisomeric pairs. Labetalol HCl in Sodium Chloride Injection and Labetalol HCl in Dextrose Injection are two preservative-free, ready- to use formulations of labetalol. Labetalol HCl in Sodium Chloride Injection and Labetalol HCl in Dextrose Injection are clear, colorless to pale yellow, aqueous, sterile, isotonic solution for intravenous injection. Each milliliter of Labetalol HCl in Sodium Chloride Injection contains 1 mg of labetalol HCl, 7.2 mg sodium chloride, 9 mg of anhydrous dextrose, 0.02 mg of edetate disodium; and citric acid monohydrate and sodium hydroxide, as necessary, to bring the solution into the pH range of 3.5 to 4.5. Each milliliter of Labetalol HCl in Dextrose Injection contains 1 mg of labetalol HCl, 45 mg of anhydrous dextrose, 0.02 mg of edetate disodium; and citric acid monohydrate and sodium hydroxide, as necessary, to bring the solution into the pH range of 3.5 to 4.5. Labetalol Hydrochloride Injection prefilled syringe and vial are two preservative-free, ready-to use formulations of labetalol. Labetalol Hydrochloride Injection is a clear, colorless to pale yellow, aqueous, sterile, isotonic solution for intravenous injection. Each milliliter of Labetalol Hydrochloride Injection, USP, contains 5 mg of labetalol HCI, 45 mg of anhydrous dextrose, 0.1 mg of edetate disodium, and citric acid monohydrate and sodium hydroxide, as necessary, to bring the solution into the pH range of 3.0 to 4.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>0143-9472-06</NDCCode>
    <PackageDescription>6 BAG in 1 CARTON (0143-9472-06)  / 200 mL in 1 BAG (0143-9472-01) </PackageDescription>
    <NDC11Code>00143-9472-06</NDC11Code>
    <ProductNDC>0143-9472</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tyzavan</ProprietaryName>
    <NonProprietaryName>Vancomycin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20251017</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA211962</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>VANCOMYCIN</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/200mL</StrengthUnit>
    <Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251017</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>TYZAVAN is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients (1 month and older) for whom appropriate dosing with this formulation can be achieved: : 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
    <Description>TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags contain vancomycin as vancomycin hydrochloride. It is a tricyclic glycopeptide antibacterial drug derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-{[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]-oxy}-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino]valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36(iminometha-no)-13,16:31,35-dimetheno-1H,16H-[1,6,9]-oxadiazacyclohexadecino-[4,5-m][10,2,16]-benzoxa-diazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags are sterile, nonpyrogenic premixed 100 mL, 150 mL, 200 mL, 250 mL, 300 mL, 350 mL or 400 mL solution containing 500 mg, 750 mg, 1 g, 1.25 g, 1.5 g, 1.75 g or 2 g vancomycin, respectively, as vancomycin hydrochloride. Each 100 mL of solution contains 1.36 g N-acetyl-D-alanine, 1.26 g L-lysine hydrochloride (monochloride) in water for injection. Hydrochloric acid and sodium hydroxide are used for pH adjustment. The pH is 4.5 to 5.5 and the osmolarity is 350 to 475 mOsmol/L.</Description>
  </NDC>
  <NDC>
    <NDCCode>0143-9472-12</NDCCode>
    <PackageDescription>12 BAG in 1 CARTON (0143-9472-12)  / 200 mL in 1 BAG (0143-9472-01) </PackageDescription>
    <NDC11Code>00143-9472-12</NDC11Code>
    <ProductNDC>0143-9472</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tyzavan</ProprietaryName>
    <NonProprietaryName>Vancomycin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20251017</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA211962</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>VANCOMYCIN</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/200mL</StrengthUnit>
    <Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251017</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>TYZAVAN is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients (1 month and older) for whom appropriate dosing with this formulation can be achieved: : 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
    <Description>TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags contain vancomycin as vancomycin hydrochloride. It is a tricyclic glycopeptide antibacterial drug derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-{[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]-oxy}-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino]valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36(iminometha-no)-13,16:31,35-dimetheno-1H,16H-[1,6,9]-oxadiazacyclohexadecino-[4,5-m][10,2,16]-benzoxa-diazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags are sterile, nonpyrogenic premixed 100 mL, 150 mL, 200 mL, 250 mL, 300 mL, 350 mL or 400 mL solution containing 500 mg, 750 mg, 1 g, 1.25 g, 1.5 g, 1.75 g or 2 g vancomycin, respectively, as vancomycin hydrochloride. Each 100 mL of solution contains 1.36 g N-acetyl-D-alanine, 1.26 g L-lysine hydrochloride (monochloride) in water for injection. Hydrochloric acid and sodium hydroxide are used for pH adjustment. The pH is 4.5 to 5.5 and the osmolarity is 350 to 475 mOsmol/L.</Description>
  </NDC>
  <NDC>
    <NDCCode>0143-9633-10</NDCCode>
    <PackageDescription>10 BAG in 1 CARTON (0143-9633-10)  / 200 mL in 1 BAG (0143-9633-01) </PackageDescription>
    <NDC11Code>00143-9633-10</NDC11Code>
    <ProductNDC>0143-9633</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nicardipine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Nicardipine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20160407</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA022276</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>NICARDIPINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>.2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Calcium Channel Antagonists [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-04-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160407</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Nicardipine hydrochloride injection, USP is a calcium channel blocker indicated for the short-term treatment of hypertension when oral therapy is not feasible.</IndicationAndUsage>
    <Description>Nicardipine hydrochloride, USP is a calcium ion influx inhibitor (slow channel blocker or calcium channel blocker). Nicardipine hydrochloride for intravenous administration contains 2.5 mg/mL of nicardipine hydrochloride, USP. Nicardipine hydrochloride is a dihydropyridine derivative with IUPAC (International Union of Pure and Applied Chemistry) chemical name (±)-2-(benzyl-methyl amino) ethyl methyl 1,4-dihydro-2, 6-dimethyl-4- (m-nitrophenyl)-3,5-pyridinedicarboxylate monohydrochloride and has the following structure. Nicardipine hydrochloride, USP is a yellow to pale yellow, odorless, crystalline powder that has a melting point range of 165-170◦ C. It is soluble in methanol, sparingly soluble in ethanol, slightly soluble in acetone, chloroform and water. It has a molecular weight of 515.99. Nicardipine hydrochloride injection, USP is available as a sterile, non-pyrogenic, clear, yellow solution in 10 mL vials for intravenous infusion after dilution. Each mL contains 2.5 mg nicardipine hydrochloride, 0.305 mg benzoic acid, USP and 7.5 mg sodium chloride, USP, in Water for Injection, USP. Sodium hydroxide, NF, (q.s.) may have been added to adjust pH to 3.2 to 4.2. Nicardipine Hydrochloride in 0.9% Sodium Chloride Injection is available as a single-use, ready-to-use, iso-osmotic, clear, yellow solution for intravenous administration in a 200 mL single dose container. Each mL contains 0.1 mg or 0.2 mg nicardipine hydrochloride in 9 mg Sodium Chloride, USP. Hydrochloric acid (q.s.) may have been added to adjust pH to 3 to 5.</Description>
  </NDC>
  <NDC>
    <NDCCode>0143-9634-10</NDCCode>
    <PackageDescription>10 BAG in 1 CARTON (0143-9634-10)  / 200 mL in 1 BAG (0143-9634-01) </PackageDescription>
    <NDC11Code>00143-9634-10</NDC11Code>
    <ProductNDC>0143-9634</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nicardipine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Nicardipine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20160407</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA022276</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>NICARDIPINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>.1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Calcium Channel Antagonists [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-04-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160407</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Nicardipine hydrochloride injection, USP is a calcium channel blocker indicated for the short-term treatment of hypertension when oral therapy is not feasible.</IndicationAndUsage>
    <Description>Nicardipine hydrochloride, USP is a calcium ion influx inhibitor (slow channel blocker or calcium channel blocker). Nicardipine hydrochloride for intravenous administration contains 2.5 mg/mL of nicardipine hydrochloride, USP. Nicardipine hydrochloride is a dihydropyridine derivative with IUPAC (International Union of Pure and Applied Chemistry) chemical name (±)-2-(benzyl-methyl amino) ethyl methyl 1,4-dihydro-2, 6-dimethyl-4- (m-nitrophenyl)-3,5-pyridinedicarboxylate monohydrochloride and has the following structure. Nicardipine hydrochloride, USP is a yellow to pale yellow, odorless, crystalline powder that has a melting point range of 165-170◦ C. It is soluble in methanol, sparingly soluble in ethanol, slightly soluble in acetone, chloroform and water. It has a molecular weight of 515.99. Nicardipine hydrochloride injection, USP is available as a sterile, non-pyrogenic, clear, yellow solution in 10 mL vials for intravenous infusion after dilution. Each mL contains 2.5 mg nicardipine hydrochloride, 0.305 mg benzoic acid, USP and 7.5 mg sodium chloride, USP, in Water for Injection, USP. Sodium hydroxide, NF, (q.s.) may have been added to adjust pH to 3.2 to 4.2. Nicardipine Hydrochloride in 0.9% Sodium Chloride Injection is available as a single-use, ready-to-use, iso-osmotic, clear, yellow solution for intravenous administration in a 200 mL single dose container. Each mL contains 0.1 mg or 0.2 mg nicardipine hydrochloride in 9 mg Sodium Chloride, USP. Hydrochloric acid (q.s.) may have been added to adjust pH to 3 to 5.</Description>
  </NDC>
  <NDC>
    <NDCCode>0143-9666-06</NDCCode>
    <PackageDescription>6 CONTAINER in 1 CARTON (0143-9666-06)  / 200 mL in 1 CONTAINER (0143-9666-01) </PackageDescription>
    <NDC11Code>00143-9666-06</NDC11Code>
    <ProductNDC>0143-9666</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fluconazole</ProprietaryName>
    <NonProprietaryName>Fluconazole</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20120130</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078764</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>FLUCONAZOLE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-07-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120130</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fluconazole Injection, USP is indicated for the treatment of: : 1 Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole was also effective for the treatment of Candida urinary tract infections, peritonitis, and systemic Candida infections including candidemia, disseminated candidiasis, and pneumonia. , 2 Cryptococcal meningitis. Before prescribing fluconazole for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIES section. Studies comparing fluconazole to amphotericin B in non-HIV infected patients have not been conducted. .</IndicationAndUsage>
    <Description>Fluconazole Injection, USP, the first of a new subclass of synthetic triazole antifungal agents, is available as a sterile solution for intravenous use in glass and in plastic containers. Fluconazole is designated chemically as 2,4-difluoro-α,α1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with an empirical formula of C13H12F2N6O and molecular weight of 306.3. The structural formula is:. Fluconazole is a white crystalline solid which is slightly soluble in water and saline. Fluconazole Injection, USP is an iso-osmotic, sterile, nonpyrogenic solution of Fluconazole, USP in a sodium chloride or dextrose diluent. Each mL contains 2 mg of Fluconazole, USP and 9 mg of Sodium Chloride, USP or 56 mg of Dextrose, hydrous. The pH ranges from 4.0 to 8.0 in the sodium chloride diluent and from 3.5 to 6.5 in the dextrose diluent. Injection volume of 100 mL is packaged in glass and in plastic containers. Injection volume of 200 mL is packed in plastic containers. The plastic container is fabricated from polypropylene. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., cis-13-docosenoicamide (Erucamide), up to 32 mcg/mL. The Erucamide is an authorized additive listed in the 21 CFR 175.105 "Indirect Food Additives". However, the suitability of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>0143-9668-06</NDCCode>
    <PackageDescription>6 CONTAINER in 1 CARTON (0143-9668-06)  / 200 mL in 1 CONTAINER (0143-9668-01) </PackageDescription>
    <NDC11Code>00143-9668-06</NDC11Code>
    <ProductNDC>0143-9668</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fluconazole</ProprietaryName>
    <NonProprietaryName>Fluconazole</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20120130</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078698</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>FLUCONAZOLE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-07-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120130</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fluconazole Injection, USP is indicated for the treatment of: : 1 Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole was also effective for the treatment of Candida urinary tract infections, peritonitis, and systemic Candida infections including candidemia, disseminated candidiasis, and pneumonia. , 2 Cryptococcal meningitis. Before prescribing fluconazole for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIES section. Studies comparing fluconazole to amphotericin B in non-HIV infected patients have not been conducted. .</IndicationAndUsage>
    <Description>Fluconazole Injection, USP, the first of a new subclass of synthetic triazole antifungal agents, is available as a sterile solution for intravenous use in glass and in plastic containers. Fluconazole is designated chemically as 2,4-difluoro-α,α1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with an empirical formula of C13H12F2N6O and molecular weight of 306.3. The structural formula is:. Fluconazole is a white crystalline solid which is slightly soluble in water and saline. Fluconazole Injection, USP is an iso-osmotic, sterile, nonpyrogenic solution of Fluconazole, USP in a sodium chloride or dextrose diluent. Each mL contains 2 mg of Fluconazole, USP and 9 mg of Sodium Chloride, USP or 56 mg of Dextrose, hydrous. The pH ranges from 4.0 to 8.0 in the sodium chloride diluent and from 3.5 to 6.5 in the dextrose diluent. Injection volume of 100 mL is packaged in glass and in plastic containers. Injection volume of 200 mL is packed in plastic containers. The plastic container is fabricated from polypropylene. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., cis-13-docosenoicamide (Erucamide), up to 32 mcg/mL. The Erucamide is an authorized additive listed in the 21 CFR 175.105 "Indirect Food Additives". However, the suitability of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>0143-9668-10</NDCCode>
    <PackageDescription>10 CONTAINER in 1 CARTON (0143-9668-10)  / 200 mL in 1 CONTAINER (0143-9668-01) </PackageDescription>
    <NDC11Code>00143-9668-10</NDC11Code>
    <ProductNDC>0143-9668</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fluconazole</ProprietaryName>
    <NonProprietaryName>Fluconazole</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20120130</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078698</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>FLUCONAZOLE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-07-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120130</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fluconazole Injection, USP is indicated for the treatment of: : 1 Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole was also effective for the treatment of Candida urinary tract infections, peritonitis, and systemic Candida infections including candidemia, disseminated candidiasis, and pneumonia. , 2 Cryptococcal meningitis. Before prescribing fluconazole for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIES section. Studies comparing fluconazole to amphotericin B in non-HIV infected patients have not been conducted. .</IndicationAndUsage>
    <Description>Fluconazole Injection, USP, the first of a new subclass of synthetic triazole antifungal agents, is available as a sterile solution for intravenous use in glass and in plastic containers. Fluconazole is designated chemically as 2,4-difluoro-α,α1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with an empirical formula of C13H12F2N6O and molecular weight of 306.3. The structural formula is:. Fluconazole is a white crystalline solid which is slightly soluble in water and saline. Fluconazole Injection, USP is an iso-osmotic, sterile, nonpyrogenic solution of Fluconazole, USP in a sodium chloride or dextrose diluent. Each mL contains 2 mg of Fluconazole, USP and 9 mg of Sodium Chloride, USP or 56 mg of Dextrose, hydrous. The pH ranges from 4.0 to 8.0 in the sodium chloride diluent and from 3.5 to 6.5 in the dextrose diluent. Injection volume of 100 mL is packaged in glass and in plastic containers. Injection volume of 200 mL is packed in plastic containers. The plastic container is fabricated from polypropylene. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., cis-13-docosenoicamide (Erucamide), up to 32 mcg/mL. The Erucamide is an authorized additive listed in the 21 CFR 175.105 "Indirect Food Additives". However, the suitability of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>0143-9718-10</NDCCode>
    <PackageDescription>10 CONTAINER in 1 PACKAGE (0143-9718-10)  / 200 mL in 1 CONTAINER (0143-9718-01) </PackageDescription>
    <NDC11Code>00143-9718-10</NDC11Code>
    <ProductNDC>0143-9718</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Milrinone Lactate In Dextrose</ProprietaryName>
    <NonProprietaryName>Milrinone Lactate In Dextrose</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20100121</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090038</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>MILRINONE LACTATE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>ug/mL</StrengthUnit>
    <Pharm_Classes>Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-05-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100121</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Milrinone lactate injection is indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life threatening ventricular arrhythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.</IndicationAndUsage>
    <Description>Milrinone lactate injection is a member of a class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4’-bipyridine]-5‑carbonitrile lactate and has the following structure. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.2 and a molecular formula of C12H9N3O. It is slightly soluble in methanol, and very slightly soluble in chloroform and in water. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone lactate is available as sterile aqueous solutions of the lactate salt of milrinone for injection or infusion intravenously. Sterile, Single Dose Vials: Single dose vials of 10, 20 and 50 mL contain in each mL milrinone lactate equivalent to 1 mg milrinone and 47 mg Dextrose Anhydrous, USP, in Water for Injection, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The total concentration of lactic acid can vary between 0.95 mg/mL and 1.29 mg/mL. These vials require preparation of dilutions prior to administration to patients intravenously. Pre-Mix Flexible Containers: The Flexible Containers provide two ready-to-use dilutions of milrinone in volumes of 100 mL and 200 mL of 5% Dextrose Injection. Each mL contains milrinone lactate equivalent to 200 mcg (0.2 mg) milrinone. The nominal concentration of lactic acid is 0.282 mg/mL. Each mL also contains 49.4 mg Dextrose Anhydrous, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The flexible plastic container is comprised of polypropylene with a foil overwrap. Water can permeate the plastic into the overwrap, but the amount is insufficient to significantly affect the pre-mix solution.</Description>
  </NDC>
  <NDC>
    <NDCCode>0216-2601-01</NDCCode>
    <PackageDescription>200 mg in 1 VIAL (0216-2601-01)</PackageDescription>
    <NDC11Code>00216-2601-01</NDC11Code>
    <ProductNDC>0216-2601</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Zaleplon</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20100915</StartMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
    <LabelerName>THE UNITED STATES PHARMACOPEIAL CONVENTION</LabelerName>
    <SubstanceName>ZALEPLON</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/200mg</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2014-02-04</LastUpdate>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>0216-2785-01</NDCCode>
    <PackageDescription>200 mg in 1 VIAL (0216-2785-01)</PackageDescription>
    <NDC11Code>00216-2785-01</NDC11Code>
    <ProductNDC>0216-2785</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Zolpidem Tartrate</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20100915</StartMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
    <LabelerName>THE UNITED STATES PHARMACOPEIAL CONVENTION</LabelerName>
    <SubstanceName>ZOLPIDEM</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/200mg</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2014-02-04</LastUpdate>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>0259-1620-01</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-USE in 1 CARTON (0259-1620-01)  / 200 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-USE</PackageDescription>
    <NDC11Code>00259-1620-01</NDC11Code>
    <ProductNDC>0259-1620</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Xeomin</ProprietaryName>
    <NonProprietaryName>Incobotulinumtoxina</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20151120</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125360</ApplicationNumber>
    <LabelerName>Merz Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>BOTULINUM TOXIN TYPE A</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>[USP'U]/1</StrengthUnit>
    <Pharm_Classes>Acetylcholine Release Inhibitor [EPC], Acetylcholine Release Inhibitors [MoA], Neuromuscular Blockade [PE], Neuromuscular Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20151120</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>XEOMIN is an acetylcholine release inhibitor and neuromuscular blocking agent indicated for the treatment or improvement of: 1 Chronic sialorrhea in patients 2 years of age and older (1.1), 2 Upper limb spasticity in patients 2 years of age and older (1.2), 3 Cervical dystonia in adults (1.3), 4 Blepharospasm in adults (1.4), 5 the appearance of upper facial lines in adults:moderate to severe glabellar lines associated with corrugator and/or procerus muscle activity (1.5)moderate to severe horizontal forehead lines associated with frontalis muscle activity (1.5)moderate to severe lateral canthal lines associated with orbicularis oculi muscle activity (1.5).</IndicationAndUsage>
    <Description>The active ingredient of XEOMIN is botulinum toxin type A produced from fermentation of Hall strain Clostridium botulinum serotype A. The botulinum toxin complex is purified from the culture supernatant and then the active ingredient is separated from the proteins (hemagglutinins and non-hemagglutinins) through a series of steps yielding the active neurotoxin with molecular weight of 150 kDa, without accessory proteins. XEOMIN is a sterile white to off-white lyophilized powder intended for intramuscular or intra-salivary gland injection after reconstitution with preservative-free 0.9% Sodium Chloride Injection, USP [see Dosage Forms and Strengths (3)]. One vial of XEOMIN contains 50 Units, 100 Units, or 200 Units of incobotulinumtoxinA, human albumin (1 mg), and sucrose (4.7 mg). The primary release procedure for XEOMIN uses a cell-based potency assay to determine the potency relative to a reference standard. One Unit corresponds to the median intraperitoneal lethal dose (LD50) in mice. As the method for conducting the assay is specific to XEOMIN, Units of biological activity of XEOMIN cannot be converted into Units of any other botulinum toxin assessed with other specific assays.</Description>
  </NDC>
  <NDC>
    <NDCCode>0280-0114-01</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (0280-0114-01)  / 200 TABLET in 1 BOTTLE</PackageDescription>
    <NDC11Code>00280-0114-01</NDC11Code>
    <ProductNDC>0280-0114</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Aleve</ProprietaryName>
    <ProprietaryNameSuffix>Caplets</ProprietaryNameSuffix>
    <NonProprietaryName>Naproxen Sodium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230404</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020204</ApplicationNumber>
    <LabelerName>Bayer HealthCare LLC.</LabelerName>
    <SubstanceName>NAPROXEN SODIUM</SubstanceName>
    <StrengthNumber>220</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240325</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>temporarily relieves minor aches and pains due to: minor pain of arthritismuscular achesbackachemenstrual crampsheadachetoothachethe common cold.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>0280-0131-01</NDCCode>
    <PackageDescription>200 TABLET in 1 BOTTLE (0280-0131-01) </PackageDescription>
    <NDC11Code>00280-0131-01</NDC11Code>
    <ProductNDC>0280-0131</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Aleve</ProprietaryName>
    <ProprietaryNameSuffix>Easy Open Arthritis</ProprietaryNameSuffix>
    <NonProprietaryName>Naproxen Sodium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230404</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020204</ApplicationNumber>
    <LabelerName>Bayer HealthCare LLC.</LabelerName>
    <SubstanceName>NAPROXEN SODIUM</SubstanceName>
    <StrengthNumber>220</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240325</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>temporarily relieves minor aches and pains due to: minor pain of arthritismuscular achesbackachemenstrual crampsheadachetoothachethe common cold.</IndicationAndUsage>
  </NDC>
</NDCList>