{
"NDC": [
{
"NDCCode": "82804-016-12",
"PackageDescription": "12 TABLET in 1 BOTTLE (82804-016-12) ",
"NDC11Code": "82804-0016-12",
"ProductNDC": "82804-016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenazopyridine Hydrochloride",
"NonProprietaryName": "Phenazopyridine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230508",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "PHENAZOPYRIDINE HYDROCHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231004",
"SamplePackage": "N",
"IndicationAndUsage": "Phenazopyridine HCL is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).",
"Description": "Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine HCl oral tablets contain the following inactive ingredients: Croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methyl cellulose, magnesium stearate, maize (corn starch), microcrystalline cellulose, polyethylene glycol, povidone and pregelatinized starch."
},
{
"NDCCode": "82804-016-06",
"PackageDescription": "6 TABLET in 1 BOTTLE (82804-016-06) ",
"NDC11Code": "82804-0016-06",
"ProductNDC": "82804-016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenazopyridine Hydrochloride",
"NonProprietaryName": "Phenazopyridine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230508",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "PHENAZOPYRIDINE HYDROCHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231004",
"SamplePackage": "N",
"IndicationAndUsage": "Phenazopyridine HCL is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).",
"Description": "Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine HCl oral tablets contain the following inactive ingredients: Croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methyl cellulose, magnesium stearate, maize (corn starch), microcrystalline cellulose, polyethylene glycol, povidone and pregelatinized starch."
},
{
"NDCCode": "82804-016-10",
"PackageDescription": "10 TABLET in 1 BOTTLE (82804-016-10) ",
"NDC11Code": "82804-0016-10",
"ProductNDC": "82804-016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenazopyridine Hydrochloride",
"NonProprietaryName": "Phenazopyridine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230508",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "PHENAZOPYRIDINE HYDROCHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231004",
"SamplePackage": "N",
"IndicationAndUsage": "Phenazopyridine HCL is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).",
"Description": "Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine HCl oral tablets contain the following inactive ingredients: Croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methyl cellulose, magnesium stearate, maize (corn starch), microcrystalline cellulose, polyethylene glycol, povidone and pregelatinized starch."
},
{
"NDCCode": "82804-016-20",
"PackageDescription": "20 TABLET in 1 BOTTLE (82804-016-20) ",
"NDC11Code": "82804-0016-20",
"ProductNDC": "82804-016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenazopyridine Hydrochloride",
"NonProprietaryName": "Phenazopyridine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230508",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "PHENAZOPYRIDINE HYDROCHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231004",
"SamplePackage": "N",
"IndicationAndUsage": "Phenazopyridine HCL is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).",
"Description": "Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine HCl oral tablets contain the following inactive ingredients: Croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methyl cellulose, magnesium stearate, maize (corn starch), microcrystalline cellulose, polyethylene glycol, povidone and pregelatinized starch."
},
{
"NDCCode": "82804-016-24",
"PackageDescription": "24 TABLET in 1 BOTTLE (82804-016-24) ",
"NDC11Code": "82804-0016-24",
"ProductNDC": "82804-016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenazopyridine Hydrochloride",
"NonProprietaryName": "Phenazopyridine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230508",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "PHENAZOPYRIDINE HYDROCHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231004",
"SamplePackage": "N",
"IndicationAndUsage": "Phenazopyridine HCL is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).",
"Description": "Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine HCl oral tablets contain the following inactive ingredients: Croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methyl cellulose, magnesium stearate, maize (corn starch), microcrystalline cellulose, polyethylene glycol, povidone and pregelatinized starch."
},
{
"NDCCode": "82804-016-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (82804-016-30) ",
"NDC11Code": "82804-0016-30",
"ProductNDC": "82804-016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenazopyridine Hydrochloride",
"NonProprietaryName": "Phenazopyridine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230508",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "PHENAZOPYRIDINE HYDROCHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231004",
"SamplePackage": "N",
"IndicationAndUsage": "Phenazopyridine HCL is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).",
"Description": "Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine HCl oral tablets contain the following inactive ingredients: Croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methyl cellulose, magnesium stearate, maize (corn starch), microcrystalline cellulose, polyethylene glycol, povidone and pregelatinized starch."
},
{
"NDCCode": "82804-016-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (82804-016-60) ",
"NDC11Code": "82804-0016-60",
"ProductNDC": "82804-016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenazopyridine Hydrochloride",
"NonProprietaryName": "Phenazopyridine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230508",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "PHENAZOPYRIDINE HYDROCHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231004",
"SamplePackage": "N",
"IndicationAndUsage": "Phenazopyridine HCL is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).",
"Description": "Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine HCl oral tablets contain the following inactive ingredients: Croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methyl cellulose, magnesium stearate, maize (corn starch), microcrystalline cellulose, polyethylene glycol, povidone and pregelatinized starch."
},
{
"NDCCode": "82804-016-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (82804-016-90) ",
"NDC11Code": "82804-0016-90",
"ProductNDC": "82804-016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenazopyridine Hydrochloride",
"NonProprietaryName": "Phenazopyridine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230508",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "PHENAZOPYRIDINE HYDROCHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231004",
"SamplePackage": "N",
"IndicationAndUsage": "Phenazopyridine HCL is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).",
"Description": "Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine HCl oral tablets contain the following inactive ingredients: Croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methyl cellulose, magnesium stearate, maize (corn starch), microcrystalline cellulose, polyethylene glycol, povidone and pregelatinized starch."
},
{
"NDCCode": "82804-004-12",
"PackageDescription": "12 TABLET in 1 BOTTLE (82804-004-12) ",
"NDC11Code": "82804-0004-12",
"ProductNDC": "82804-004",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenazopyridine Hydrochloride",
"NonProprietaryName": "Phenazopyridine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230508",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "PHENAZOPYRIDINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2025-05-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20230831",
"SamplePackage": "N",
"IndicationAndUsage": "Phenazopyridine HCL is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).",
"Description": "Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine HCl oral tablets contain the following inactive ingredients: Croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methyl cellulose, magnesium stearate, maize (corn starch), microcrystalline cellulose, polyethylene glycol, povidone and pregelatinized starch."
},
{
"NDCCode": "82804-017-12",
"PackageDescription": "125 mL in 1 BOTTLE (82804-017-12) ",
"NDC11Code": "82804-0017-12",
"ProductNDC": "82804-017",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin And Clavulanate Potassium",
"NonProprietaryName": "Amoxicillin And Clavulanate Potassium",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20111220",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201091",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "AMOXICILLIN; CLAVULANATE POTASSIUM",
"StrengthNumber": "600; 42.9",
"StrengthUnit": "mg/5mL; mg/5mL",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-10-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231005",
"SamplePackage": "N",
"IndicationAndUsage": "Amoxicillin and clavulanate potassium for oral suspension is indicated for the treatment of pediatric patients with: 1 Recurrent or persistent acute otitis media due to S. pneumoniae (penicillin MICs less than or equal to 2 mcg/mL), H. influenzae (including β-lactamase-producing strains), or M. catarrhalis (including β-lactamase-producing strains) characterized by the following risk factors: .",
"Description": "Amoxicillin and clavulanate potassium for oral suspension, USP is an oral antibacterial combination consisting of the semisynthetic antibacterial amoxicillin and the β-lactamase inhibitor, clavulanate potassium (the potassium salt of clavulanic acid). Amoxicillin is an analog of ampicillin, derived from the basic penicillin nucleus, 6-aminopenicillanic acid. The amoxicillin molecular formula is C16H19N3O5S3H2O, and the molecular weight is 419.46. Chemically, amoxicillin is (2S,5R,6R)-6-[(R)-(-)-2-Amino-2-(p‑-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid trihydrate and may be represented structurally as. Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a β-lactam structurally related to the penicillins and possesses the ability to inactivate a wide variety of β-lactamases by blocking the active sites of these enzymes. Clavulanic acid is particularly active against the clinically important plasmid-mediated β-lactamases frequently responsible for transferred drug resistance to penicillins and cephalosporins. The clavulanate potassium molecular formula is C8H8KNO5 and the molecular weight is 237.25. Chemically, clavulanate potassium is potassium (Z)-(2R,5R)-3-(2-hydroxyethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2‑carboxylate and may be represented structurally as. Following constitution, each 5 mL of oral suspension contains 600 mg of amoxicillin USP as the trihydrate and 42.9 mg of clavulanic acid (equivalent to 51.1 mg of clavulanate potassium). Amoxicillin and clavulanate potassium for oral suspension, USP is white to off-white granular powder and becomes white to pale yellow suspension with strawberry flavor after reconstitution. Inactive Ingredients:—Aspartame, colloidal silicon dioxide, hypromellose, silicon dioxide, strawberry cream permaseal, succinic acid, and xanthan gum [see Warnings and Precautions (5.7)]. Each 5 mL of reconstituted amoxicillin and clavulanate potassium for oral suspension USP, 600 mg/42.9 mg per 5 mL contains 0.21 mEq potassium."
},
{
"NDCCode": "82804-047-12",
"PackageDescription": "12 TABLET in 1 BOTTLE (82804-047-12) ",
"NDC11Code": "82804-0047-12",
"ProductNDC": "82804-047",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenazopyridine Hydrochloride",
"NonProprietaryName": "Phenazopyridine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20231019",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "PHENAZOPYRIDINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2024-02-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231220",
"SamplePackage": "N",
"IndicationAndUsage": "Phenazopyridine Hydrochloride is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine Hydrochloride for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine Hydrochloride is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine Hydrochloride should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine Hydrochloride and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).",
"Description": "Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine Hydrochloride oral tablets contain the following inactive ingredients: Croscarmellose Sodium, D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake, FD&C Red #40 Aluminum Lake, FD&C Yellow #6 Aluminum Lake, Magnesium Stearate, Microcrystalline Cellulose, Polyethylene Glycol, Polyvinyl Alcohol, Povidone, Pregelatinized Starch, Talc, and Titanium Dioxide."
},
{
"NDCCode": "82804-074-12",
"PackageDescription": "1 BOTTLE in 1 CARTON (82804-074-12) / 112 g in 1 BOTTLE",
"NDC11Code": "82804-0074-12",
"ProductNDC": "82804-074",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diclofenac Sodium",
"NonProprietaryName": "Diclofenac Sodium",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20230203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213040",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "DICLOFENAC SODIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2024-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240325",
"SamplePackage": "N",
"IndicationAndUsage": "Diclofenac sodium topical solution is indicated for the treatment of the pain of osteoarthritis of the knee(s).",
"Description": "Diclofenac sodium 2% topical solution, contains diclofenac sodium, a benzeneacetic acid derivative that is a nonsteroidal anti-inflammatory drug, and is available as a clear, colorless to faintly pink or orange solution for topical application. The chemical name is 2[(2,6-dichlorophenyl)amino]-benzeneacetic acid, monosodium salt. The molecular weight is 318.14. Its molecular formula is C14H10Cl2NNaO2, and it has the following chemical structure. Each 1 gram of solution contains 20 mg of diclofenac sodium USP. The inactive ingredients: dimethyl sulfoxide (DMSO, 45.5% w/w), ethanol 96%, hydroxypropyl cellulose, propylene glycol and purified water."
},
{
"NDCCode": "82804-113-12",
"PackageDescription": "1 BOTTLE, PUMP in 1 CARTON (82804-113-12) / 112 g in 1 BOTTLE, PUMP",
"NDC11Code": "82804-0113-12",
"ProductNDC": "82804-113",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diclofenac Sodium",
"NonProprietaryName": "Diclofenac Sodium",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20240219",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208021",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "DICLOFENAC SODIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2024-07-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240705",
"SamplePackage": "N",
"IndicationAndUsage": "Diclofenac sodium topical solution is a nonsteroidal anti-inflammatory drug indicated for the treatment of the pain of osteoarthritis of the knee(s). (1).",
"Description": "Diclofenac sodium topical solution USP, 2% w/w, contains diclofenac sodium, a benzeneacetic acid derivative that is a nonsteroidal anti-inflammatory drug, and is available as a clear, colorless to faintly pink or orange solution for topical application. The chemical name is 2-[(2,6-dichlorophenyl)amino]-benzeneacetic acid, monosodium salt. The molecular weight is 318.14. Its molecular formula is C14H10Cl2NNaO2 and it has the following chemical structure. Each 1 gram of solution contains 20 mg of diclofenac sodium USP. The inactive ingredients: dimethyl sulfoxide (DMSO, 45.5% w/w), dehydrated alcohol, hydroxypropyl cellulose, propylene glycol and purified water."
},
{
"NDCCode": "82804-116-12",
"PackageDescription": "12 TABLET in 1 BOTTLE (82804-116-12) ",
"NDC11Code": "82804-0116-12",
"ProductNDC": "82804-116",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"NonProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20001020",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040409",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "HYDROCODONE BITARTRATE; ACETAMINOPHEN",
"StrengthNumber": "5; 325",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC], Opioid Agonists [MoA]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2024-07-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240702",
"SamplePackage": "N",
"IndicationAndUsage": "Hydrocodone bitartrate and acetaminophen tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of UseBecause of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration (see WARNINGS), reserve hydrocodone bitartrate and acetaminophen tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics): 1 have not been tolerated or are not expected to be tolerated,, 2 have not provided adequate analgesia or are not expected to provide adequate analgesia.",
"Description": "Hydrocodone bitartrate and acetaminophen is available in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Each Hydrocodone Bitartrate and Acetaminophen Tablet USP contains. In addition each tablet contains the following inactive ingredients: crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, silicon dioxide, and stearic acid. Meets USP Dissolution Test 1."
},
{
"NDCCode": "82804-125-12",
"PackageDescription": "12 TABLET in 1 BOTTLE (82804-125-12) ",
"NDC11Code": "82804-0125-12",
"ProductNDC": "82804-125",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenazopyridine Hydrochloride",
"NonProprietaryName": "Phenazopyridine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20231019",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "PHENAZOPYRIDINE HYDROCHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2024-11-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241120",
"SamplePackage": "N",
"IndicationAndUsage": "Phenazopyridine Hydrochloride is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine Hydrochloride for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine Hydrochloride is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine Hydrochloride should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine Hydrochloride and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Error! Hyperlink reference not valid..).",
"Description": "Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine Hydrochloride oral tablets contain the following inactive ingredients: Croscarmellose Sodium, D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake, FD&C Red #40 Aluminum Lake, FD&C Yellow #6 Aluminum Lake, Magnesium Stearate, Microcrystalline Cellulose, Polyethylene Glycol, Polyvinyl Alcohol, Povidone, Pregelatinized Starch, Talc, and Titanium Dioxide."
},
{
"NDCCode": "82804-160-12",
"PackageDescription": "1 BOTTLE in 1 CARTON (82804-160-12) / 112 g in 1 BOTTLE",
"NDC11Code": "82804-0160-12",
"ProductNDC": "82804-160",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diclofenac Sodium",
"NonProprietaryName": "Diclofenac Sodium",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20240601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213040",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "DICLOFENAC SODIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2024-11-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241111",
"SamplePackage": "N",
"IndicationAndUsage": "Diclofenac sodium topical solution is indicated for the treatment of the pain of osteoarthritis of the knee(s).",
"Description": "Diclofenac sodium 2% topical solution, contains diclofenac sodium, a benzeneacetic acid derivative that is a nonsteroidal anti-inflammatory drug, and is available as a clear, colorless to faintly pink or orange solution for topical application. The chemical name is 2[(2,6-dichlorophenyl)amino]-benzeneacetic acid, monosodium salt. The molecular weight is 318.14. Its molecular formula is C14H10Cl2NNaO2, and it has the following chemical structure. Each 1 gram of solution contains 20 mg of diclofenac sodium USP. The inactive ingredients: dimethyl sulfoxide (DMSO, 45.5% w/w), ethanol 96%, hydroxypropyl cellulose, propylene glycol and purified water."
},
{
"NDCCode": "82804-192-12",
"PackageDescription": "12 TABLET in 1 BOTTLE (82804-192-12) ",
"NDC11Code": "82804-0192-12",
"ProductNDC": "82804-192",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenazopyridine Hydrochloride",
"NonProprietaryName": "Phenazopyridine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110201",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "PHENAZOPYRIDINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250130",
"SamplePackage": "N",
"IndicationAndUsage": "Phenazopyridine HCl is indicated for the symptomatic relief of pain, burning, urgency, frequency, and other discomforts arising from irritation of the lower urinary tract mucosa caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine HCl for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. Because it provides only symptomatic relief, prompt appropriate treatment of the cause of pain must be instituted and Phenazopyridine HCl should be discontinued when symptoms are controlled. The analgesic action may reduce or eliminate the need for systemic analgesics or narcotics. It is, however, compatible with antibacterial therapy and can help to relieve pain and discomfort during the interval before antibacterial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine HCl should not exceed 2 days because there is a lack of evidence that the combined administration of Phenazopyridine HCl and an antibacterial provides greater benefit than administration of the antibacterial alone after 2 days (see Error! Hyperlink reference not valid. section).",
"Description": "Phenazopyridine Hydrochloride, USP is light or dark red to dark violet, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. It has the following structural formula. C11H11N5HCl M.W. 249.70. Phenazopyridine HCl tablets, USP contain the following inactive ingredients: carnauba wax, croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch."
},
{
"NDCCode": "82804-202-12",
"PackageDescription": "4 BLISTER PACK in 1 CARTON (82804-202-12) / 3 TABLET in 1 BLISTER PACK",
"NDC11Code": "82804-0202-12",
"ProductNDC": "82804-202",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rizatriptan Benzoate",
"NonProprietaryName": "Rizatriptan Benzoate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20121231",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202490",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "RIZATRIPTAN BENZOATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250225",
"SamplePackage": "N",
"IndicationAndUsage": "Rizatriptan benzoate tablets are indicated for the acute treatment of migraine with or without aura in adults and in pediatric patients 6 to 17 years old. Limitations of Use: 1 Rizatriptan benzoate tablets should only be used where a clear diagnosis of migraine has been established. If a patient has no response for the first migraine attack treated with rizatriptan benzoate tablets, the diagnosis of migraine should be reconsidered before rizatriptan benzoate tablets are administered to treat any subsequent attacks., 2 Rizatriptan benzoate tablets are not indicated for use in the management of hemiplegic or basilar migraine [see Contraindications (4)]. , 3 Rizatriptan benzoate tablets are not indicated for the prevention of migraine attacks. , 4 Safety and effectiveness of rizatriptan benzoate tablets have not been established for cluster headache.",
"Description": "Rizatriptan benzoate tablets USP contain rizatriptan benzoate, a selective 5-hydroxytryptamine1B/1D (5-HT1B/1D) receptor agonist.Rizatriptan benzoate is described chemically as: N,N-dimethyl-5-(1H-1,2,4-triazol-1-ylmethyl)-1H‑-indole-3-ethanamine monobenzoate and its structural formula is:. Its molecular formula is C15H19N5C7H6O2, representing a molecular weight of the free base of 269.35. Rizatriptan benzoate is a white to almost white crystalline powder that is soluble in water at about 42 mg per mL (expressed as free base) at 25°C.Rizatriptan benzoate tablets USP are available for oral administration in strengths of 5 mg and 10 mg (corresponding to 7.265 mg or 14.53 mg of the benzoate salt, respectively). Each compressed tablet contains the following inactive ingredients: corn starch, iron oxide red, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and pregelatinized starch (maize)."
},
{
"NDCCode": "82804-306-12",
"PackageDescription": "12 TABLET in 1 BOTTLE (82804-306-12) ",
"NDC11Code": "82804-0306-12",
"ProductNDC": "82804-306",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"NonProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202935",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "HYDROCODONE BITARTRATE; ACETAMINOPHEN",
"StrengthNumber": "5; 325",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC], Opioid Agonists [MoA]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-07-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260722",
"SamplePackage": "N",
"IndicationAndUsage": "Hydrocodone bitartrate and acetaminophen tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see WARNINGS], reserve opioid analgesics, including Hydrocodone Bitartrate and Acetaminophen Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.",
"Description": "Hydrocodone Bitartrate and Acetaminophen Tablets, USP is supplied in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and antitussive and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is 4,5 α -Epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4´-Hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Each Hydrocodone Bitartrate and Acetaminophen Tablet, 5 mg/325 mg contains. Hydrocodone Bitartrate …..... 5 mg. Acetaminophen ................. 325 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, 7.5 mg/325 mg contains. Hydrocodone Bitartrate ......... 7.5 mg. Acetaminophen ..................... 325 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablets, 10 mg/325 mg contains. Hydrocodone Bitartrate .......... 10 mg. Acetaminophen ..................... 325 mg. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, and stearic acid. Meets USP Dissolution Test 1."
},
{
"NDCCode": "82804-994-12",
"PackageDescription": "12 TABLET in 1 BOTTLE (82804-994-12) ",
"NDC11Code": "82804-0994-12",
"ProductNDC": "82804-994",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenazopyridine Hydrochloride",
"NonProprietaryName": "Phenazopyridine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20231019",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "PHENAZOPYRIDINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2024-05-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240506",
"SamplePackage": "N",
"IndicationAndUsage": "Phenazopyridine Hydrochloride is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine Hydrochloride for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine Hydrochloride is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine Hydrochloride should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine Hydrochloride and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).",
"Description": "Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine Hydrochloride oral tablets contain the following inactive ingredients: Croscarmellose Sodium, D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake, FD&C Red #40 Aluminum Lake, FD&C Yellow #6 Aluminum Lake, Magnesium Stearate, Microcrystalline Cellulose, Polyethylene Glycol, Polyvinyl Alcohol, Povidone, Pregelatinized Starch, Talc, and Titanium Dioxide."
},
{
"NDCCode": "82804-995-12",
"PackageDescription": "12 TABLET in 1 BOTTLE (82804-995-12) ",
"NDC11Code": "82804-0995-12",
"ProductNDC": "82804-995",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenazopyridine Hydrochloride",
"NonProprietaryName": "Phenazopyridine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20231019",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "PHENAZOPYRIDINE HYDROCHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2024-05-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240506",
"SamplePackage": "N",
"IndicationAndUsage": "Phenazopyridine Hydrochloride is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine Hydrochloride for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine Hydrochloride is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine Hydrochloride should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine Hydrochloride and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).",
"Description": "Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine Hydrochloride oral tablets contain the following inactive ingredients: Croscarmellose Sodium, D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake, FD&C Red #40 Aluminum Lake, FD&C Yellow #6 Aluminum Lake, Magnesium Stearate, Microcrystalline Cellulose, Polyethylene Glycol, Polyvinyl Alcohol, Povidone, Pregelatinized Starch, Talc, and Titanium Dioxide."
},
{
"NDCCode": "10736-016-12",
"PackageDescription": "8750.9 L in 1 CYLINDER (10736-016-12)",
"NDC11Code": "10736-0016-12",
"ProductNDC": "10736-016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Air",
"NonProprietaryName": "Air",
"DosageFormName": "GAS",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "19630101",
"MarketingCategoryName": "UNAPPROVED MEDICAL GAS",
"LabelerName": "Medical-Technical Gases, Inc.",
"SubstanceName": "AIR",
"StrengthNumber": "1000",
"StrengthUnit": "mL/L",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "13668-016-12",
"PackageDescription": "120 TABLET in 1 BOTTLE (13668-016-12) ",
"NDC11Code": "13668-0016-12",
"ProductNDC": "13668-016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levetiracetam",
"NonProprietaryName": "Levetiracetam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20090115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078858",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "LEVETIRACETAM",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2025-02-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20090115",
"SamplePackage": "N",
"IndicationAndUsage": "Levetiracetam is indicated for the treatment of partial-onset seizures in patients 1 month of age and older (1.1). Levetiracetam is indicated for adjunctive therapy for the treatment of: 1 Myoclonic seizures in patients 12 years of age and older with juvenile myoclonic epilepsy (1.2), 2 Primary generalized tonic-clonic seizures in patients 6 years of age and older with idiopathic generalized epilepsy (1.3).",
"Description": "Levetiracetam is an antiepileptic drug available as 250 mg (blue), 500 mg (yellow), 750 mg (orange), and 1,000 mg (white) tablets. The chemical name of levetiracetam, USP, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam, USP is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam, USP is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam tablets, USP contain the labeled amount of levetiracetam, USP. Inactive ingredients: colloidal silicon dioxide, corn starch, hypromellose, magnesium stearate, polyethylene glycol 400, povidone, sodium starch glycolate, talc, titanium dioxide, and additional agents listed below. 250 mg tablets: FD&C Blue #2 Lake of indigo carmine. 500 mg tablets: Ferric oxide yellow. 750 mg tablets: Ferric oxide red and FD&C #6 lake of sunset yellow. Meets USP Dissolution Test 3."
},
{
"NDCCode": "13734-016-30",
"PackageDescription": "1 TRAY in 1 CARTON (13734-016-30) > 12 g in 1 TRAY",
"NDC11Code": "13734-0016-30",
"ProductNDC": "13734-016",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nars",
"ProprietaryNameSuffix": "Syracuse",
"NonProprietaryName": "Octinoxate And Titanium Dioxide",
"DosageFormName": "POWDER",
"RouteName": "TOPICAL",
"StartMarketingDate": "20090901",
"EndMarketingDate": "20151201",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "NARS COSMETICS",
"SubstanceName": "OCTINOXATE; TITANIUM DIOXIDE",
"StrengthNumber": "588; 792",
"StrengthUnit": "mg/12g; mg/12g",
"Status": "Deprecated",
"LastUpdate": "2015-12-04"
},
{
"NDCCode": "25682-016-12",
"PackageDescription": "12 VIAL in 1 CARTON (25682-016-12) / 1 mL in 1 VIAL (25682-016-01) ",
"NDC11Code": "25682-0016-12",
"ProductNDC": "25682-016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Strensiq",
"NonProprietaryName": "Asfotase Alfa",
"DosageFormName": "SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20151023",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125513",
"LabelerName": "Alexion Pharmaceuticals, Inc.",
"SubstanceName": "ASFOTASE ALFA",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Alkaline Phosphatase [CS], Tissue-nonspecific Alkaline Phosphatase [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20151023",
"SamplePackage": "N",
"IndicationAndUsage": "STRENSIQ® is indicated for the treatment of patients with perinatal/infantile- and juvenile-onset hypophosphatasia (HPP).",
"Description": "Asfotase alfa is a tissue nonspecific alkaline phosphatase (TNSALP) produced by recombinant DNA technology in a Chinese hamster ovary cell line. Asfotase alfa is a soluble glycoprotein composed of two identical polypeptide chains. Each chain contains 726 amino acids with a theoretical mass of 161 kDa. Each chain consists of the catalytic domain of human TNSALP, the human immunoglobulin G1 Fc domain and a deca-aspartate peptide used as a bone targeting domain. The two polypeptide chains are covalently linked by two disulfide bonds. STRENSIQ (asfotase alfa) injection is a sterile, preservative-free, nonpyrogenic, clear, slightly opalescent or opalescent, colorless to slightly yellow, with few small translucent or white particles, aqueous solution for subcutaneous administration. STRENSIQ is supplied in glass single-dose vials containing asfotase alfa; dibasic sodium phosphate, heptahydrate; monobasic sodium phosphate, monohydrate; and sodium chloride at a pH between 7.2 and 7.6. Table 5 describes the content of STRENSIQ vial presentations."
},
{
"NDCCode": "33342-016-12",
"PackageDescription": "100 TABLET in 1 CARTON (33342-016-12) ",
"NDC11Code": "33342-0016-12",
"ProductNDC": "33342-016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine",
"NonProprietaryName": "Amlodipine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120413",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201380",
"LabelerName": "Macleods Pharmaceuticals Limited",
"SubstanceName": "AMLODIPINE BESYLATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2020-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20120413",
"SamplePackage": "N"
},
{
"NDCCode": "37000-016-12",
"PackageDescription": "12 TABLET in 1 BOTTLE, PLASTIC (37000-016-12)",
"NDC11Code": "37000-0016-12",
"ProductNDC": "37000-016",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Pepto-bismol To Go",
"NonProprietaryName": "Bismuth Subsalicylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120301",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part335",
"LabelerName": "The Procter & Gamble Manufacturing Company",
"SubstanceName": "BISMUTH SUBSALICYLATE",
"StrengthNumber": "262",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-06-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "37000-017-01",
"PackageDescription": "1 KIT in 1 PACKAGE (37000-017-01) * 354 mL in 1 BOTTLE, PLASTIC (37000-032-03) * 12 TABLET in 1 BOTTLE, PLASTIC (37000-016-12) ",
"NDC11Code": "37000-0017-01",
"ProductNDC": "37000-017",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Pepto-bismol And Pepto-bismol To Go",
"NonProprietaryName": "Bismuth Subsalicylate",
"DosageFormName": "KIT",
"StartMarketingDate": "20120917",
"EndMarketingDate": "20181031",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part335",
"LabelerName": "The Procter & Gamble Manufacturing Company",
"Status": "Deprecated",
"LastUpdate": "2018-11-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20120917",
"EndMarketingDatePackage": "20181031",
"SamplePackage": "N"
},
{
"NDCCode": "43798-016-01",
"PackageDescription": "12 BOTTLE in 1 CASE (43798-016-01) > 90 CAPSULE in 1 BOTTLE",
"NDC11Code": "43798-0016-01",
"ProductNDC": "43798-016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sustiva",
"NonProprietaryName": "Sustiva",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20171130",
"MarketingCategoryName": "APPROVED DRUG PRODUCT MANUFACTURED UNDER CONTRACT",
"ApplicationNumber": "NDA020972",
"LabelerName": "Aesica Queenborough Limited",
"SubstanceName": "EFAVIRENZ",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Human Immunodeficiency Virus 1 Non-Nucleoside Analog Reverse Transcriptase Inhibitor [EPC],Non-Nucleoside Analog [Chemical/Ingredient],Non-Nucleoside Reverse Transcriptase Inhibitors [MoA],Cytochrome P450 3A Inducers [MoA],Cytochrome P450 2B6 Inducers [MoA],Cytochrome P450 2C9 Inhibitors [MoA],Cytochrome P450 2C19 Inhibitors [MoA],Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2017-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "51655-016-27",
"PackageDescription": "12 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (51655-016-27) ",
"NDC11Code": "51655-0016-27",
"ProductNDC": "51655-016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ondansetron Hydrochloride",
"NonProprietaryName": "Ondansetron Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220808",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078539",
"LabelerName": "Northwind Health Company, LLC",
"SubstanceName": "ONDANSETRON HYDROCHLORIDE",
"StrengthNumber": "8",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220916",
"SamplePackage": "N",
"IndicationAndUsage": "Ondansetron tablets are indicated for the prevention of nausea and vomiting associated with. Ondansetron tablets are also indicated for the prevention of postoperative nausea and/or vomiting.",
"Description": "The active ingredient in ondansetron tablets, USP is ondansetron hydrochloride as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT 3receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula: The molecular formula is C 18H 19N 3OHCl2H 2O, representing a molecular weight of 365.9 g/mol. Ondansetron hydrochloride USP (dihydrate) is a white to off-white powder that is soluble in water and normal saline. Ondansetron tablets, USP for oral administration contain ondansetron hydrochloride USP (dihydrate) equivalent to 4 mg or 8 mg or 24 mg of ondansetron. Each film-coated tablet also contains the inactive ingredients anhydrous lactose, microcrystalline cellulose, pregelatinized starch (maize), magnesium stearate, triacetin, titanium dioxide and hypromellose. In addition 8 mg tablet also contains iron oxide yellow and 24 mg tablet also contains iron oxide red. Meets USP dissolution test 6."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>82804-016-12</NDCCode>
<PackageDescription>12 TABLET in 1 BOTTLE (82804-016-12) </PackageDescription>
<NDC11Code>82804-0016-12</NDC11Code>
<ProductNDC>82804-016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenazopyridine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230508</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231004</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phenazopyridine HCL is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).</IndicationAndUsage>
<Description>Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine HCl oral tablets contain the following inactive ingredients: Croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methyl cellulose, magnesium stearate, maize (corn starch), microcrystalline cellulose, polyethylene glycol, povidone and pregelatinized starch.</Description>
</NDC>
<NDC>
<NDCCode>82804-016-06</NDCCode>
<PackageDescription>6 TABLET in 1 BOTTLE (82804-016-06) </PackageDescription>
<NDC11Code>82804-0016-06</NDC11Code>
<ProductNDC>82804-016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenazopyridine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230508</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231004</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phenazopyridine HCL is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).</IndicationAndUsage>
<Description>Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine HCl oral tablets contain the following inactive ingredients: Croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methyl cellulose, magnesium stearate, maize (corn starch), microcrystalline cellulose, polyethylene glycol, povidone and pregelatinized starch.</Description>
</NDC>
<NDC>
<NDCCode>82804-016-10</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE (82804-016-10) </PackageDescription>
<NDC11Code>82804-0016-10</NDC11Code>
<ProductNDC>82804-016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenazopyridine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230508</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231004</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phenazopyridine HCL is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).</IndicationAndUsage>
<Description>Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine HCl oral tablets contain the following inactive ingredients: Croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methyl cellulose, magnesium stearate, maize (corn starch), microcrystalline cellulose, polyethylene glycol, povidone and pregelatinized starch.</Description>
</NDC>
<NDC>
<NDCCode>82804-016-20</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE (82804-016-20) </PackageDescription>
<NDC11Code>82804-0016-20</NDC11Code>
<ProductNDC>82804-016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenazopyridine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230508</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231004</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phenazopyridine HCL is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).</IndicationAndUsage>
<Description>Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine HCl oral tablets contain the following inactive ingredients: Croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methyl cellulose, magnesium stearate, maize (corn starch), microcrystalline cellulose, polyethylene glycol, povidone and pregelatinized starch.</Description>
</NDC>
<NDC>
<NDCCode>82804-016-24</NDCCode>
<PackageDescription>24 TABLET in 1 BOTTLE (82804-016-24) </PackageDescription>
<NDC11Code>82804-0016-24</NDC11Code>
<ProductNDC>82804-016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenazopyridine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230508</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231004</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phenazopyridine HCL is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).</IndicationAndUsage>
<Description>Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine HCl oral tablets contain the following inactive ingredients: Croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methyl cellulose, magnesium stearate, maize (corn starch), microcrystalline cellulose, polyethylene glycol, povidone and pregelatinized starch.</Description>
</NDC>
<NDC>
<NDCCode>82804-016-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (82804-016-30) </PackageDescription>
<NDC11Code>82804-0016-30</NDC11Code>
<ProductNDC>82804-016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenazopyridine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230508</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231004</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phenazopyridine HCL is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).</IndicationAndUsage>
<Description>Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine HCl oral tablets contain the following inactive ingredients: Croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methyl cellulose, magnesium stearate, maize (corn starch), microcrystalline cellulose, polyethylene glycol, povidone and pregelatinized starch.</Description>
</NDC>
<NDC>
<NDCCode>82804-016-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (82804-016-60) </PackageDescription>
<NDC11Code>82804-0016-60</NDC11Code>
<ProductNDC>82804-016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenazopyridine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230508</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231004</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phenazopyridine HCL is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).</IndicationAndUsage>
<Description>Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine HCl oral tablets contain the following inactive ingredients: Croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methyl cellulose, magnesium stearate, maize (corn starch), microcrystalline cellulose, polyethylene glycol, povidone and pregelatinized starch.</Description>
</NDC>
<NDC>
<NDCCode>82804-016-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (82804-016-90) </PackageDescription>
<NDC11Code>82804-0016-90</NDC11Code>
<ProductNDC>82804-016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenazopyridine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230508</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231004</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phenazopyridine HCL is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).</IndicationAndUsage>
<Description>Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine HCl oral tablets contain the following inactive ingredients: Croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methyl cellulose, magnesium stearate, maize (corn starch), microcrystalline cellulose, polyethylene glycol, povidone and pregelatinized starch.</Description>
</NDC>
<NDC>
<NDCCode>82804-004-12</NDCCode>
<PackageDescription>12 TABLET in 1 BOTTLE (82804-004-12) </PackageDescription>
<NDC11Code>82804-0004-12</NDC11Code>
<ProductNDC>82804-004</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenazopyridine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230508</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-05-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230831</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phenazopyridine HCL is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).</IndicationAndUsage>
<Description>Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine HCl oral tablets contain the following inactive ingredients: Croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methyl cellulose, magnesium stearate, maize (corn starch), microcrystalline cellulose, polyethylene glycol, povidone and pregelatinized starch.</Description>
</NDC>
<NDC>
<NDCCode>82804-017-12</NDCCode>
<PackageDescription>125 mL in 1 BOTTLE (82804-017-12) </PackageDescription>
<NDC11Code>82804-0017-12</NDC11Code>
<ProductNDC>82804-017</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin And Clavulanate Potassium</ProprietaryName>
<NonProprietaryName>Amoxicillin And Clavulanate Potassium</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20111220</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201091</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>AMOXICILLIN; CLAVULANATE POTASSIUM</SubstanceName>
<StrengthNumber>600; 42.9</StrengthNumber>
<StrengthUnit>mg/5mL; mg/5mL</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-10-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231005</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amoxicillin and clavulanate potassium for oral suspension is indicated for the treatment of pediatric patients with: 1 Recurrent or persistent acute otitis media due to S. pneumoniae (penicillin MICs less than or equal to 2 mcg/mL), H. influenzae (including β-lactamase-producing strains), or M. catarrhalis (including β-lactamase-producing strains) characterized by the following risk factors: .</IndicationAndUsage>
<Description>Amoxicillin and clavulanate potassium for oral suspension, USP is an oral antibacterial combination consisting of the semisynthetic antibacterial amoxicillin and the β-lactamase inhibitor, clavulanate potassium (the potassium salt of clavulanic acid). Amoxicillin is an analog of ampicillin, derived from the basic penicillin nucleus, 6-aminopenicillanic acid. The amoxicillin molecular formula is C16H19N3O5S3H2O, and the molecular weight is 419.46. Chemically, amoxicillin is (2S,5R,6R)-6-[(R)-(-)-2-Amino-2-(p‑-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid trihydrate and may be represented structurally as. Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a β-lactam structurally related to the penicillins and possesses the ability to inactivate a wide variety of β-lactamases by blocking the active sites of these enzymes. Clavulanic acid is particularly active against the clinically important plasmid-mediated β-lactamases frequently responsible for transferred drug resistance to penicillins and cephalosporins. The clavulanate potassium molecular formula is C8H8KNO5 and the molecular weight is 237.25. Chemically, clavulanate potassium is potassium (Z)-(2R,5R)-3-(2-hydroxyethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2‑carboxylate and may be represented structurally as. Following constitution, each 5 mL of oral suspension contains 600 mg of amoxicillin USP as the trihydrate and 42.9 mg of clavulanic acid (equivalent to 51.1 mg of clavulanate potassium). Amoxicillin and clavulanate potassium for oral suspension, USP is white to off-white granular powder and becomes white to pale yellow suspension with strawberry flavor after reconstitution. Inactive Ingredients:—Aspartame, colloidal silicon dioxide, hypromellose, silicon dioxide, strawberry cream permaseal, succinic acid, and xanthan gum [see Warnings and Precautions (5.7)]. Each 5 mL of reconstituted amoxicillin and clavulanate potassium for oral suspension USP, 600 mg/42.9 mg per 5 mL contains 0.21 mEq potassium.</Description>
</NDC>
<NDC>
<NDCCode>82804-047-12</NDCCode>
<PackageDescription>12 TABLET in 1 BOTTLE (82804-047-12) </PackageDescription>
<NDC11Code>82804-0047-12</NDC11Code>
<ProductNDC>82804-047</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenazopyridine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20231019</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-02-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phenazopyridine Hydrochloride is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine Hydrochloride for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine Hydrochloride is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine Hydrochloride should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine Hydrochloride and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).</IndicationAndUsage>
<Description>Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine Hydrochloride oral tablets contain the following inactive ingredients: Croscarmellose Sodium, D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake, FD&C Red #40 Aluminum Lake, FD&C Yellow #6 Aluminum Lake, Magnesium Stearate, Microcrystalline Cellulose, Polyethylene Glycol, Polyvinyl Alcohol, Povidone, Pregelatinized Starch, Talc, and Titanium Dioxide.</Description>
</NDC>
<NDC>
<NDCCode>82804-074-12</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (82804-074-12) / 112 g in 1 BOTTLE</PackageDescription>
<NDC11Code>82804-0074-12</NDC11Code>
<ProductNDC>82804-074</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diclofenac Sodium</ProprietaryName>
<NonProprietaryName>Diclofenac Sodium</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20230203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213040</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>DICLOFENAC SODIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240325</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diclofenac sodium topical solution is indicated for the treatment of the pain of osteoarthritis of the knee(s).</IndicationAndUsage>
<Description>Diclofenac sodium 2% topical solution, contains diclofenac sodium, a benzeneacetic acid derivative that is a nonsteroidal anti-inflammatory drug, and is available as a clear, colorless to faintly pink or orange solution for topical application. The chemical name is 2[(2,6-dichlorophenyl)amino]-benzeneacetic acid, monosodium salt. The molecular weight is 318.14. Its molecular formula is C14H10Cl2NNaO2, and it has the following chemical structure. Each 1 gram of solution contains 20 mg of diclofenac sodium USP. The inactive ingredients: dimethyl sulfoxide (DMSO, 45.5% w/w), ethanol 96%, hydroxypropyl cellulose, propylene glycol and purified water.</Description>
</NDC>
<NDC>
<NDCCode>82804-113-12</NDCCode>
<PackageDescription>1 BOTTLE, PUMP in 1 CARTON (82804-113-12) / 112 g in 1 BOTTLE, PUMP</PackageDescription>
<NDC11Code>82804-0113-12</NDC11Code>
<ProductNDC>82804-113</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diclofenac Sodium</ProprietaryName>
<NonProprietaryName>Diclofenac Sodium</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20240219</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208021</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>DICLOFENAC SODIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240705</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diclofenac sodium topical solution is a nonsteroidal anti-inflammatory drug indicated for the treatment of the pain of osteoarthritis of the knee(s). (1).</IndicationAndUsage>
<Description>Diclofenac sodium topical solution USP, 2% w/w, contains diclofenac sodium, a benzeneacetic acid derivative that is a nonsteroidal anti-inflammatory drug, and is available as a clear, colorless to faintly pink or orange solution for topical application. The chemical name is 2-[(2,6-dichlorophenyl)amino]-benzeneacetic acid, monosodium salt. The molecular weight is 318.14. Its molecular formula is C14H10Cl2NNaO2 and it has the following chemical structure. Each 1 gram of solution contains 20 mg of diclofenac sodium USP. The inactive ingredients: dimethyl sulfoxide (DMSO, 45.5% w/w), dehydrated alcohol, hydroxypropyl cellulose, propylene glycol and purified water.</Description>
</NDC>
<NDC>
<NDCCode>82804-116-12</NDCCode>
<PackageDescription>12 TABLET in 1 BOTTLE (82804-116-12) </PackageDescription>
<NDC11Code>82804-0116-12</NDC11Code>
<ProductNDC>82804-116</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocodone Bitartrate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Hydrocodone Bitartrate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20001020</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040409</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>HYDROCODONE BITARTRATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>5; 325</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC], Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-07-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240702</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydrocodone bitartrate and acetaminophen tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of UseBecause of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration (see WARNINGS), reserve hydrocodone bitartrate and acetaminophen tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics): 1 have not been tolerated or are not expected to be tolerated,, 2 have not provided adequate analgesia or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Hydrocodone bitartrate and acetaminophen is available in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Each Hydrocodone Bitartrate and Acetaminophen Tablet USP contains. In addition each tablet contains the following inactive ingredients: crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, silicon dioxide, and stearic acid. Meets USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>82804-125-12</NDCCode>
<PackageDescription>12 TABLET in 1 BOTTLE (82804-125-12) </PackageDescription>
<NDC11Code>82804-0125-12</NDC11Code>
<ProductNDC>82804-125</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenazopyridine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20231019</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-11-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241120</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phenazopyridine Hydrochloride is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine Hydrochloride for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine Hydrochloride is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine Hydrochloride should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine Hydrochloride and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Error! Hyperlink reference not valid..).</IndicationAndUsage>
<Description>Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine Hydrochloride oral tablets contain the following inactive ingredients: Croscarmellose Sodium, D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake, FD&C Red #40 Aluminum Lake, FD&C Yellow #6 Aluminum Lake, Magnesium Stearate, Microcrystalline Cellulose, Polyethylene Glycol, Polyvinyl Alcohol, Povidone, Pregelatinized Starch, Talc, and Titanium Dioxide.</Description>
</NDC>
<NDC>
<NDCCode>82804-160-12</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (82804-160-12) / 112 g in 1 BOTTLE</PackageDescription>
<NDC11Code>82804-0160-12</NDC11Code>
<ProductNDC>82804-160</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diclofenac Sodium</ProprietaryName>
<NonProprietaryName>Diclofenac Sodium</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20240601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213040</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>DICLOFENAC SODIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241111</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diclofenac sodium topical solution is indicated for the treatment of the pain of osteoarthritis of the knee(s).</IndicationAndUsage>
<Description>Diclofenac sodium 2% topical solution, contains diclofenac sodium, a benzeneacetic acid derivative that is a nonsteroidal anti-inflammatory drug, and is available as a clear, colorless to faintly pink or orange solution for topical application. The chemical name is 2[(2,6-dichlorophenyl)amino]-benzeneacetic acid, monosodium salt. The molecular weight is 318.14. Its molecular formula is C14H10Cl2NNaO2, and it has the following chemical structure. Each 1 gram of solution contains 20 mg of diclofenac sodium USP. The inactive ingredients: dimethyl sulfoxide (DMSO, 45.5% w/w), ethanol 96%, hydroxypropyl cellulose, propylene glycol and purified water.</Description>
</NDC>
<NDC>
<NDCCode>82804-192-12</NDCCode>
<PackageDescription>12 TABLET in 1 BOTTLE (82804-192-12) </PackageDescription>
<NDC11Code>82804-0192-12</NDC11Code>
<ProductNDC>82804-192</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenazopyridine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110201</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phenazopyridine HCl is indicated for the symptomatic relief of pain, burning, urgency, frequency, and other discomforts arising from irritation of the lower urinary tract mucosa caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine HCl for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. Because it provides only symptomatic relief, prompt appropriate treatment of the cause of pain must be instituted and Phenazopyridine HCl should be discontinued when symptoms are controlled. The analgesic action may reduce or eliminate the need for systemic analgesics or narcotics. It is, however, compatible with antibacterial therapy and can help to relieve pain and discomfort during the interval before antibacterial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine HCl should not exceed 2 days because there is a lack of evidence that the combined administration of Phenazopyridine HCl and an antibacterial provides greater benefit than administration of the antibacterial alone after 2 days (see Error! Hyperlink reference not valid. section).</IndicationAndUsage>
<Description>Phenazopyridine Hydrochloride, USP is light or dark red to dark violet, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. It has the following structural formula. C11H11N5HCl M.W. 249.70. Phenazopyridine HCl tablets, USP contain the following inactive ingredients: carnauba wax, croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch.</Description>
</NDC>
<NDC>
<NDCCode>82804-202-12</NDCCode>
<PackageDescription>4 BLISTER PACK in 1 CARTON (82804-202-12) / 3 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>82804-0202-12</NDC11Code>
<ProductNDC>82804-202</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rizatriptan Benzoate</ProprietaryName>
<NonProprietaryName>Rizatriptan Benzoate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121231</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202490</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>RIZATRIPTAN BENZOATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250225</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rizatriptan benzoate tablets are indicated for the acute treatment of migraine with or without aura in adults and in pediatric patients 6 to 17 years old. Limitations of Use: 1 Rizatriptan benzoate tablets should only be used where a clear diagnosis of migraine has been established. If a patient has no response for the first migraine attack treated with rizatriptan benzoate tablets, the diagnosis of migraine should be reconsidered before rizatriptan benzoate tablets are administered to treat any subsequent attacks., 2 Rizatriptan benzoate tablets are not indicated for use in the management of hemiplegic or basilar migraine [see Contraindications (4)]. , 3 Rizatriptan benzoate tablets are not indicated for the prevention of migraine attacks. , 4 Safety and effectiveness of rizatriptan benzoate tablets have not been established for cluster headache.</IndicationAndUsage>
<Description>Rizatriptan benzoate tablets USP contain rizatriptan benzoate, a selective 5-hydroxytryptamine1B/1D (5-HT1B/1D) receptor agonist.Rizatriptan benzoate is described chemically as: N,N-dimethyl-5-(1H-1,2,4-triazol-1-ylmethyl)-1H‑-indole-3-ethanamine monobenzoate and its structural formula is:. Its molecular formula is C15H19N5C7H6O2, representing a molecular weight of the free base of 269.35. Rizatriptan benzoate is a white to almost white crystalline powder that is soluble in water at about 42 mg per mL (expressed as free base) at 25°C.Rizatriptan benzoate tablets USP are available for oral administration in strengths of 5 mg and 10 mg (corresponding to 7.265 mg or 14.53 mg of the benzoate salt, respectively). Each compressed tablet contains the following inactive ingredients: corn starch, iron oxide red, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and pregelatinized starch (maize).</Description>
</NDC>
<NDC>
<NDCCode>82804-306-12</NDCCode>
<PackageDescription>12 TABLET in 1 BOTTLE (82804-306-12) </PackageDescription>
<NDC11Code>82804-0306-12</NDC11Code>
<ProductNDC>82804-306</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocodone Bitartrate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Hydrocodone Bitartrate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202935</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>HYDROCODONE BITARTRATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>5; 325</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC], Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-07-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260722</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydrocodone bitartrate and acetaminophen tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see WARNINGS], reserve opioid analgesics, including Hydrocodone Bitartrate and Acetaminophen Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.</IndicationAndUsage>
<Description>Hydrocodone Bitartrate and Acetaminophen Tablets, USP is supplied in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and antitussive and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is 4,5 α -Epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4´-Hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Each Hydrocodone Bitartrate and Acetaminophen Tablet, 5 mg/325 mg contains. Hydrocodone Bitartrate …..... 5 mg. Acetaminophen ................. 325 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, 7.5 mg/325 mg contains. Hydrocodone Bitartrate ......... 7.5 mg. Acetaminophen ..................... 325 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablets, 10 mg/325 mg contains. Hydrocodone Bitartrate .......... 10 mg. Acetaminophen ..................... 325 mg. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, and stearic acid. Meets USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>82804-994-12</NDCCode>
<PackageDescription>12 TABLET in 1 BOTTLE (82804-994-12) </PackageDescription>
<NDC11Code>82804-0994-12</NDC11Code>
<ProductNDC>82804-994</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenazopyridine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20231019</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-05-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240506</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phenazopyridine Hydrochloride is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine Hydrochloride for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine Hydrochloride is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine Hydrochloride should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine Hydrochloride and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).</IndicationAndUsage>
<Description>Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine Hydrochloride oral tablets contain the following inactive ingredients: Croscarmellose Sodium, D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake, FD&C Red #40 Aluminum Lake, FD&C Yellow #6 Aluminum Lake, Magnesium Stearate, Microcrystalline Cellulose, Polyethylene Glycol, Polyvinyl Alcohol, Povidone, Pregelatinized Starch, Talc, and Titanium Dioxide.</Description>
</NDC>
<NDC>
<NDCCode>82804-995-12</NDCCode>
<PackageDescription>12 TABLET in 1 BOTTLE (82804-995-12) </PackageDescription>
<NDC11Code>82804-0995-12</NDC11Code>
<ProductNDC>82804-995</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenazopyridine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20231019</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-05-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240506</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phenazopyridine Hydrochloride is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine Hydrochloride for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine Hydrochloride is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine Hydrochloride should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine Hydrochloride and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).</IndicationAndUsage>
<Description>Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine Hydrochloride oral tablets contain the following inactive ingredients: Croscarmellose Sodium, D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake, FD&C Red #40 Aluminum Lake, FD&C Yellow #6 Aluminum Lake, Magnesium Stearate, Microcrystalline Cellulose, Polyethylene Glycol, Polyvinyl Alcohol, Povidone, Pregelatinized Starch, Talc, and Titanium Dioxide.</Description>
</NDC>
<NDC>
<NDCCode>10736-016-12</NDCCode>
<PackageDescription>8750.9 L in 1 CYLINDER (10736-016-12)</PackageDescription>
<NDC11Code>10736-0016-12</NDC11Code>
<ProductNDC>10736-016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Air</ProprietaryName>
<NonProprietaryName>Air</NonProprietaryName>
<DosageFormName>GAS</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>19630101</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED MEDICAL GAS</MarketingCategoryName>
<LabelerName>Medical-Technical Gases, Inc.</LabelerName>
<SubstanceName>AIR</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>mL/L</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>13668-016-12</NDCCode>
<PackageDescription>120 TABLET in 1 BOTTLE (13668-016-12) </PackageDescription>
<NDC11Code>13668-0016-12</NDC11Code>
<ProductNDC>13668-016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levetiracetam</ProprietaryName>
<NonProprietaryName>Levetiracetam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078858</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>LEVETIRACETAM</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levetiracetam is indicated for the treatment of partial-onset seizures in patients 1 month of age and older (1.1). Levetiracetam is indicated for adjunctive therapy for the treatment of: 1 Myoclonic seizures in patients 12 years of age and older with juvenile myoclonic epilepsy (1.2), 2 Primary generalized tonic-clonic seizures in patients 6 years of age and older with idiopathic generalized epilepsy (1.3).</IndicationAndUsage>
<Description>Levetiracetam is an antiepileptic drug available as 250 mg (blue), 500 mg (yellow), 750 mg (orange), and 1,000 mg (white) tablets. The chemical name of levetiracetam, USP, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam, USP is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam, USP is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam tablets, USP contain the labeled amount of levetiracetam, USP. Inactive ingredients: colloidal silicon dioxide, corn starch, hypromellose, magnesium stearate, polyethylene glycol 400, povidone, sodium starch glycolate, talc, titanium dioxide, and additional agents listed below. 250 mg tablets: FD&C Blue #2 Lake of indigo carmine. 500 mg tablets: Ferric oxide yellow. 750 mg tablets: Ferric oxide red and FD&C #6 lake of sunset yellow. Meets USP Dissolution Test 3.</Description>
</NDC>
<NDC>
<NDCCode>13734-016-30</NDCCode>
<PackageDescription>1 TRAY in 1 CARTON (13734-016-30) > 12 g in 1 TRAY</PackageDescription>
<NDC11Code>13734-0016-30</NDC11Code>
<ProductNDC>13734-016</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nars</ProprietaryName>
<ProprietaryNameSuffix>Syracuse</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate And Titanium Dioxide</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20090901</StartMarketingDate>
<EndMarketingDate>20151201</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>NARS COSMETICS</LabelerName>
<SubstanceName>OCTINOXATE; TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>588; 792</StrengthNumber>
<StrengthUnit>mg/12g; mg/12g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2015-12-04</LastUpdate>
</NDC>
<NDC>
<NDCCode>25682-016-12</NDCCode>
<PackageDescription>12 VIAL in 1 CARTON (25682-016-12) / 1 mL in 1 VIAL (25682-016-01) </PackageDescription>
<NDC11Code>25682-0016-12</NDC11Code>
<ProductNDC>25682-016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Strensiq</ProprietaryName>
<NonProprietaryName>Asfotase Alfa</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20151023</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125513</ApplicationNumber>
<LabelerName>Alexion Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ASFOTASE ALFA</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Alkaline Phosphatase [CS], Tissue-nonspecific Alkaline Phosphatase [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151023</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>STRENSIQ® is indicated for the treatment of patients with perinatal/infantile- and juvenile-onset hypophosphatasia (HPP).</IndicationAndUsage>
<Description>Asfotase alfa is a tissue nonspecific alkaline phosphatase (TNSALP) produced by recombinant DNA technology in a Chinese hamster ovary cell line. Asfotase alfa is a soluble glycoprotein composed of two identical polypeptide chains. Each chain contains 726 amino acids with a theoretical mass of 161 kDa. Each chain consists of the catalytic domain of human TNSALP, the human immunoglobulin G1 Fc domain and a deca-aspartate peptide used as a bone targeting domain. The two polypeptide chains are covalently linked by two disulfide bonds. STRENSIQ (asfotase alfa) injection is a sterile, preservative-free, nonpyrogenic, clear, slightly opalescent or opalescent, colorless to slightly yellow, with few small translucent or white particles, aqueous solution for subcutaneous administration. STRENSIQ is supplied in glass single-dose vials containing asfotase alfa; dibasic sodium phosphate, heptahydrate; monobasic sodium phosphate, monohydrate; and sodium chloride at a pH between 7.2 and 7.6. Table 5 describes the content of STRENSIQ vial presentations.</Description>
</NDC>
<NDC>
<NDCCode>33342-016-12</NDCCode>
<PackageDescription>100 TABLET in 1 CARTON (33342-016-12) </PackageDescription>
<NDC11Code>33342-0016-12</NDC11Code>
<ProductNDC>33342-016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine</ProprietaryName>
<NonProprietaryName>Amlodipine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120413</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201380</ApplicationNumber>
<LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120413</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>37000-016-12</NDCCode>
<PackageDescription>12 TABLET in 1 BOTTLE, PLASTIC (37000-016-12)</PackageDescription>
<NDC11Code>37000-0016-12</NDC11Code>
<ProductNDC>37000-016</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Pepto-bismol To Go</ProprietaryName>
<NonProprietaryName>Bismuth Subsalicylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120301</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part335</ApplicationNumber>
<LabelerName>The Procter & Gamble Manufacturing Company</LabelerName>
<SubstanceName>BISMUTH SUBSALICYLATE</SubstanceName>
<StrengthNumber>262</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-06-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>37000-017-01</NDCCode>
<PackageDescription>1 KIT in 1 PACKAGE (37000-017-01) * 354 mL in 1 BOTTLE, PLASTIC (37000-032-03) * 12 TABLET in 1 BOTTLE, PLASTIC (37000-016-12) </PackageDescription>
<NDC11Code>37000-0017-01</NDC11Code>
<ProductNDC>37000-017</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Pepto-bismol And Pepto-bismol To Go</ProprietaryName>
<NonProprietaryName>Bismuth Subsalicylate</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20120917</StartMarketingDate>
<EndMarketingDate>20181031</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part335</ApplicationNumber>
<LabelerName>The Procter & Gamble Manufacturing Company</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2018-11-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20120917</StartMarketingDatePackage>
<EndMarketingDatePackage>20181031</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>43798-016-01</NDCCode>
<PackageDescription>12 BOTTLE in 1 CASE (43798-016-01) > 90 CAPSULE in 1 BOTTLE</PackageDescription>
<NDC11Code>43798-0016-01</NDC11Code>
<ProductNDC>43798-016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sustiva</ProprietaryName>
<NonProprietaryName>Sustiva</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171130</StartMarketingDate>
<MarketingCategoryName>APPROVED DRUG PRODUCT MANUFACTURED UNDER CONTRACT</MarketingCategoryName>
<ApplicationNumber>NDA020972</ApplicationNumber>
<LabelerName>Aesica Queenborough Limited</LabelerName>
<SubstanceName>EFAVIRENZ</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Human Immunodeficiency Virus 1 Non-Nucleoside Analog Reverse Transcriptase Inhibitor [EPC],Non-Nucleoside Analog [Chemical/Ingredient],Non-Nucleoside Reverse Transcriptase Inhibitors [MoA],Cytochrome P450 3A Inducers [MoA],Cytochrome P450 2B6 Inducers [MoA],Cytochrome P450 2C9 Inhibitors [MoA],Cytochrome P450 2C19 Inhibitors [MoA],Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>51655-016-27</NDCCode>
<PackageDescription>12 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (51655-016-27) </PackageDescription>
<NDC11Code>51655-0016-27</NDC11Code>
<ProductNDC>51655-016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ondansetron Hydrochloride</ProprietaryName>
<NonProprietaryName>Ondansetron Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220808</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078539</ApplicationNumber>
<LabelerName>Northwind Health Company, LLC</LabelerName>
<SubstanceName>ONDANSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220916</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ondansetron tablets are indicated for the prevention of nausea and vomiting associated with. Ondansetron tablets are also indicated for the prevention of postoperative nausea and/or vomiting.</IndicationAndUsage>
<Description>The active ingredient in ondansetron tablets, USP is ondansetron hydrochloride as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT 3receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula: The molecular formula is C 18H 19N 3OHCl2H 2O, representing a molecular weight of 365.9 g/mol. Ondansetron hydrochloride USP (dihydrate) is a white to off-white powder that is soluble in water and normal saline. Ondansetron tablets, USP for oral administration contain ondansetron hydrochloride USP (dihydrate) equivalent to 4 mg or 8 mg or 24 mg of ondansetron. Each film-coated tablet also contains the inactive ingredients anhydrous lactose, microcrystalline cellulose, pregelatinized starch (maize), magnesium stearate, triacetin, titanium dioxide and hypromellose. In addition 8 mg tablet also contains iron oxide yellow and 24 mg tablet also contains iron oxide red. Meets USP dissolution test 6.</Description>
</NDC>
</NDCList>