RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>82804-995-24</NDCCode>
    <PackageDescription>24 TABLET in 1 BOTTLE (82804-995-24) </PackageDescription>
    <NDC11Code>82804-0995-24</NDC11Code>
    <ProductNDC>82804-995</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Phenazopyridine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20231019</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2024-05-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240506</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Phenazopyridine Hydrochloride is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine Hydrochloride for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine Hydrochloride is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine Hydrochloride should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine Hydrochloride and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).</IndicationAndUsage>
    <Description>Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine Hydrochloride oral tablets contain the following inactive ingredients: Croscarmellose Sodium, D&amp;C Yellow #10 Aluminum Lake, FD&amp;C Blue #1 Aluminum Lake, FD&amp;C Red #40 Aluminum Lake, FD&amp;C Yellow #6 Aluminum Lake, Magnesium Stearate, Microcrystalline Cellulose, Polyethylene Glycol, Polyvinyl Alcohol, Povidone, Pregelatinized Starch, Talc, and Titanium Dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>82804-004-24</NDCCode>
    <PackageDescription>24 TABLET in 1 BOTTLE (82804-004-24) </PackageDescription>
    <NDC11Code>82804-0004-24</NDC11Code>
    <ProductNDC>82804-004</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Phenazopyridine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230508</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2025-05-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230831</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Phenazopyridine HCL is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).</IndicationAndUsage>
    <Description>Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine HCl oral tablets contain the following inactive ingredients: Croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methyl cellulose, magnesium stearate, maize (corn starch), microcrystalline cellulose, polyethylene glycol, povidone and pregelatinized starch.</Description>
  </NDC>
  <NDC>
    <NDCCode>82804-016-24</NDCCode>
    <PackageDescription>24 TABLET in 1 BOTTLE (82804-016-24) </PackageDescription>
    <NDC11Code>82804-0016-24</NDC11Code>
    <ProductNDC>82804-016</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Phenazopyridine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230508</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2025-11-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231004</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Phenazopyridine HCL is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).</IndicationAndUsage>
    <Description>Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine HCl oral tablets contain the following inactive ingredients: Croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methyl cellulose, magnesium stearate, maize (corn starch), microcrystalline cellulose, polyethylene glycol, povidone and pregelatinized starch.</Description>
  </NDC>
  <NDC>
    <NDCCode>82804-047-24</NDCCode>
    <PackageDescription>24 TABLET in 1 BOTTLE (82804-047-24) </PackageDescription>
    <NDC11Code>82804-0047-24</NDC11Code>
    <ProductNDC>82804-047</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Phenazopyridine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20231019</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2024-02-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231220</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Phenazopyridine Hydrochloride is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine Hydrochloride for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine Hydrochloride is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine Hydrochloride should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine Hydrochloride and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).</IndicationAndUsage>
    <Description>Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine Hydrochloride oral tablets contain the following inactive ingredients: Croscarmellose Sodium, D&amp;C Yellow #10 Aluminum Lake, FD&amp;C Blue #1 Aluminum Lake, FD&amp;C Red #40 Aluminum Lake, FD&amp;C Yellow #6 Aluminum Lake, Magnesium Stearate, Microcrystalline Cellulose, Polyethylene Glycol, Polyvinyl Alcohol, Povidone, Pregelatinized Starch, Talc, and Titanium Dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>82804-293-24</NDCCode>
    <PackageDescription>24 TABLET in 1 BOTTLE (82804-293-24) </PackageDescription>
    <NDC11Code>82804-0293-24</NDC11Code>
    <ProductNDC>82804-293</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ibuprofen</ProprietaryName>
    <NonProprietaryName>Ibuprofen</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200508</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213794</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>IBUPROFEN</SubstanceName>
    <StrengthNumber>800</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260603</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Carefully consider the potential benefits and risks of ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of ibuprofen tablets in children have not been conducted.</IndicationAndUsage>
    <Description>Ibuprofen tablets USP contain the active ingredient ibuprofen, which is (±) - 2 - (p - isobutylphenyl) propionic acid. Ibuprofen is a white to off-white, crystalline powder with a melting point of 74 to 77°C and is very soluble in alcohol, in methanol, in acetone and in chloroform, slightly soluble in ethyl acetate, practically insoluble in water. The structural formula is represented below:. Ibuprofen tablets USP, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol-part. hydrolyzed, povidone, stearic acid, talc and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>82804-994-24</NDCCode>
    <PackageDescription>24 TABLET in 1 BOTTLE (82804-994-24) </PackageDescription>
    <NDC11Code>82804-0994-24</NDC11Code>
    <ProductNDC>82804-994</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Phenazopyridine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20231019</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2024-05-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240506</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Phenazopyridine Hydrochloride is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine Hydrochloride for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine Hydrochloride is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine Hydrochloride should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine Hydrochloride and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).</IndicationAndUsage>
    <Description>Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine Hydrochloride oral tablets contain the following inactive ingredients: Croscarmellose Sodium, D&amp;C Yellow #10 Aluminum Lake, FD&amp;C Blue #1 Aluminum Lake, FD&amp;C Red #40 Aluminum Lake, FD&amp;C Yellow #6 Aluminum Lake, Magnesium Stearate, Microcrystalline Cellulose, Polyethylene Glycol, Polyvinyl Alcohol, Povidone, Pregelatinized Starch, Talc, and Titanium Dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>43066-995-24</NDCCode>
    <PackageDescription>24 BAG in 1 CASE (43066-995-24)  / 50 mL in 1 BAG</PackageDescription>
    <NDC11Code>43066-0995-24</NDC11Code>
    <ProductNDC>43066-995</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clindamycin Phosphate</ProprietaryName>
    <NonProprietaryName>Clindamycin Phosphate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20170628</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208084</ApplicationNumber>
    <LabelerName>Baxter Healthcare Corporation</LabelerName>
    <SubstanceName>CLINDAMYCIN PHOSPHATE</SubstanceName>
    <StrengthNumber>900</StrengthNumber>
    <StrengthUnit>mg/50mL</StrengthUnit>
    <Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-05-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220228</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Clindamycin Injection USP in 5% Dextrose products are indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin Injection USP in 5% Dextrose products are also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of antibacterial drug-associated pseudomembranous colitis, as described in the BOXED WARNING, before selecting clindamycin the physician should consider the nature of the infection and the suitability of less toxic alternatives (e.g., erythromycin). Bacteriologic studies should be performed to determine the causative organisms and their susceptibility to clindamycin. Indicated surgical procedures should be performed in conjunction with antibacterial drug therapy. Clindamycin Injection USP in 5% Dextrose is indicated in the treatment of serious infections caused by susceptible strains of the designated organisms in the conditions listed below. Lower respiratory tract infections including pneumonia, empyema, and lung abscess caused by anaerobes, Streptococcus pneumoniae, other streptococci (except E. faecalis), and Staphylococcus aureus. Skin and skin structure infections caused by Streptococcus pyogenes, Staphylococcus aureus, and anaerobes. Gynecological infections including endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis, and postsurgical vaginal cuff infection caused by susceptible anaerobes. Intra-abdominal infections including peritonitis and intra-abdominal abscess caused by susceptible anaerobic organisms. Septicemia caused by Staphylococcus aureus, streptococci (except Enterococcus faecalis), and susceptible anaerobes. Bone and joint infections including acute hematogenous osteomyelitis caused by Staphylococcus aureus and as adjunctive therapy in the surgical treatment of chronic bone and joint infections due to susceptible organisms. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Clindamycin Injection USP in 5% Dextrose and other antibacterial drugs, Clindamycin Injection USP in 5% Dextrose should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Clindamycin Injection USP in 5% Dextrose in the GALAXY plastic container for intravenous use is composed of clindamycin phosphate equivalent to 300, 600 and 900 mg of clindamycin premixed with 5% dextrose as a sterile solution. Disodium edetate has been added at a concentration of 0.04 mg/mL. The pH has been adjusted with sodium hydroxide and/or hydrochloric acid. Clindamycin is a semisynthetic antibacterial drug produced by a 7(S)‑chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. The chemical name of clindamycin phosphate is L-threo-α-D-galacto-Octopyranoside, methyl-7-chloro-6,7,8-trideoxy-6-[[(1-methyl-4-propyl-2-pyrrolidinyl) carbonyl]amino]‑1-thio-, 2-(dihydrogen phosphate), (2S-trans)-. The molecular formula is C18H34ClN2O8PS and the molecular weight is 504.96. The structural formula is represented below. Clindamycin Injection USP in 5% Dextrose in the GALAXY plastic containers is for Intravenous Use. The plastic container is fabricated from a specially designed multilayer plastic. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period. The suitability of the plastic has been confirmed in tests in animals according to the USP biological tests for plastic containers, as well as by tissue culture toxicity studies.</Description>
  </NDC>
  <NDC>
    <NDCCode>63354-995-24</NDCCode>
    <PackageDescription>24 SWAB in 1 PACKET (63354-995-24) </PackageDescription>
    <NDC11Code>63354-0995-24</NDC11Code>
    <ProductNDC>63354-995</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Wet Ones Antibacterial Hand Wipes Fresh Scent</ProprietaryName>
    <NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
    <DosageFormName>SWAB</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20200427</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part333A</ApplicationNumber>
    <LabelerName>Edgewell Personal Care Brands LLC</LabelerName>
    <SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
    <StrengthNumber>.13</StrengthNumber>
    <StrengthUnit>1/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2025-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200427</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>decreases bacteria on skin.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>63868-995-24</NDCCode>
    <PackageDescription>3 BLISTER PACK in 1 CARTON (63868-995-24)  &gt; 8 CAPSULE, LIQUID FILLED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>63868-0995-24</NDC11Code>
    <ProductNDC>63868-995</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Dye-free Allergy Relief</ProprietaryName>
    <NonProprietaryName>Diphenhydramine Hcl</NonProprietaryName>
    <DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20010913</StartMarketingDate>
    <EndMarketingDate>20180713</EndMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
    <ApplicationNumber>part341</ApplicationNumber>
    <LabelerName>CHAIN DRUG MARKETING ASSOCIATION INC</LabelerName>
    <SubstanceName>DIPHENHYDRAMINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2018-07-13</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
  </NDC>
  <NDC>
    <NDCCode>69423-995-24</NDCCode>
    <PackageDescription>8 BLISTER PACK in 1 CARTON (69423-995-24)  / 3 CAPSULE, LIQUID FILLED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>69423-0995-24</NDC11Code>
    <ProductNDC>69423-995</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Vicks Nyquil</ProprietaryName>
    <ProprietaryNameSuffix>Cold And Flu</ProprietaryNameSuffix>
    <NonProprietaryName>Acetaminophen, Dextromethorphan Hydrobromide, And Doxylamine Succinate</NonProprietaryName>
    <DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210101</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M012</ApplicationNumber>
    <LabelerName>The Procter &amp; Gamble Manufacturing Company</LabelerName>
    <SubstanceName>DEXTROMETHORPHAN HYDROBROMIDE; DOXYLAMINE SUCCINATE; ACETAMINOPHEN</SubstanceName>
    <StrengthNumber>15; 6.25; 325</StrengthNumber>
    <StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Antihistamine [EPC], Histamine Receptor Antagonists [MoA], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-10-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>temporarily relieves common cold/flu symptoms: 1 cough due to minor throat &amp; bronchial irritation, 2 sore throat, 3 headache, 4 minor aches &amp; pains, 5 fever, 6 runny nose &amp; sneezing.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>69423-995-48</NDCCode>
    <PackageDescription>24 BLISTER PACK in 1 CARTON (69423-995-48)  / 2 CAPSULE, LIQUID FILLED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>69423-0995-48</NDC11Code>
    <ProductNDC>69423-995</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Vicks Nyquil</ProprietaryName>
    <ProprietaryNameSuffix>Cold And Flu</ProprietaryNameSuffix>
    <NonProprietaryName>Acetaminophen, Dextromethorphan Hydrobromide, And Doxylamine Succinate</NonProprietaryName>
    <DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210101</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M012</ApplicationNumber>
    <LabelerName>The Procter &amp; Gamble Manufacturing Company</LabelerName>
    <SubstanceName>DEXTROMETHORPHAN HYDROBROMIDE; DOXYLAMINE SUCCINATE; ACETAMINOPHEN</SubstanceName>
    <StrengthNumber>15; 6.25; 325</StrengthNumber>
    <StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Antihistamine [EPC], Histamine Receptor Antagonists [MoA], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-10-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>temporarily relieves common cold/flu symptoms: 1 cough due to minor throat &amp; bronchial irritation, 2 sore throat, 3 headache, 4 minor aches &amp; pains, 5 fever, 6 runny nose &amp; sneezing.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>82804-995-00</NDCCode>
    <PackageDescription>100 TABLET in 1 BOTTLE (82804-995-00) </PackageDescription>
    <NDC11Code>82804-0995-00</NDC11Code>
    <ProductNDC>82804-995</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Phenazopyridine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20231019</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2024-05-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240506</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Phenazopyridine Hydrochloride is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine Hydrochloride for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine Hydrochloride is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine Hydrochloride should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine Hydrochloride and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).</IndicationAndUsage>
    <Description>Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine Hydrochloride oral tablets contain the following inactive ingredients: Croscarmellose Sodium, D&amp;C Yellow #10 Aluminum Lake, FD&amp;C Blue #1 Aluminum Lake, FD&amp;C Red #40 Aluminum Lake, FD&amp;C Yellow #6 Aluminum Lake, Magnesium Stearate, Microcrystalline Cellulose, Polyethylene Glycol, Polyvinyl Alcohol, Povidone, Pregelatinized Starch, Talc, and Titanium Dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>82804-995-06</NDCCode>
    <PackageDescription>6 TABLET in 1 BOTTLE (82804-995-06) </PackageDescription>
    <NDC11Code>82804-0995-06</NDC11Code>
    <ProductNDC>82804-995</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Phenazopyridine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20231019</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2024-05-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240506</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Phenazopyridine Hydrochloride is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine Hydrochloride for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine Hydrochloride is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine Hydrochloride should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine Hydrochloride and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).</IndicationAndUsage>
    <Description>Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine Hydrochloride oral tablets contain the following inactive ingredients: Croscarmellose Sodium, D&amp;C Yellow #10 Aluminum Lake, FD&amp;C Blue #1 Aluminum Lake, FD&amp;C Red #40 Aluminum Lake, FD&amp;C Yellow #6 Aluminum Lake, Magnesium Stearate, Microcrystalline Cellulose, Polyethylene Glycol, Polyvinyl Alcohol, Povidone, Pregelatinized Starch, Talc, and Titanium Dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>82804-995-10</NDCCode>
    <PackageDescription>10 TABLET in 1 BOTTLE (82804-995-10) </PackageDescription>
    <NDC11Code>82804-0995-10</NDC11Code>
    <ProductNDC>82804-995</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Phenazopyridine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20231019</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2024-05-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240506</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Phenazopyridine Hydrochloride is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine Hydrochloride for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine Hydrochloride is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine Hydrochloride should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine Hydrochloride and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).</IndicationAndUsage>
    <Description>Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine Hydrochloride oral tablets contain the following inactive ingredients: Croscarmellose Sodium, D&amp;C Yellow #10 Aluminum Lake, FD&amp;C Blue #1 Aluminum Lake, FD&amp;C Red #40 Aluminum Lake, FD&amp;C Yellow #6 Aluminum Lake, Magnesium Stearate, Microcrystalline Cellulose, Polyethylene Glycol, Polyvinyl Alcohol, Povidone, Pregelatinized Starch, Talc, and Titanium Dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>82804-995-12</NDCCode>
    <PackageDescription>12 TABLET in 1 BOTTLE (82804-995-12) </PackageDescription>
    <NDC11Code>82804-0995-12</NDC11Code>
    <ProductNDC>82804-995</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Phenazopyridine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20231019</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2024-05-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240506</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Phenazopyridine Hydrochloride is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine Hydrochloride for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine Hydrochloride is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine Hydrochloride should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine Hydrochloride and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).</IndicationAndUsage>
    <Description>Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine Hydrochloride oral tablets contain the following inactive ingredients: Croscarmellose Sodium, D&amp;C Yellow #10 Aluminum Lake, FD&amp;C Blue #1 Aluminum Lake, FD&amp;C Red #40 Aluminum Lake, FD&amp;C Yellow #6 Aluminum Lake, Magnesium Stearate, Microcrystalline Cellulose, Polyethylene Glycol, Polyvinyl Alcohol, Povidone, Pregelatinized Starch, Talc, and Titanium Dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>82804-995-20</NDCCode>
    <PackageDescription>20 TABLET in 1 BOTTLE (82804-995-20) </PackageDescription>
    <NDC11Code>82804-0995-20</NDC11Code>
    <ProductNDC>82804-995</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Phenazopyridine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20231019</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2024-05-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240506</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Phenazopyridine Hydrochloride is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine Hydrochloride for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine Hydrochloride is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine Hydrochloride should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine Hydrochloride and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).</IndicationAndUsage>
    <Description>Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine Hydrochloride oral tablets contain the following inactive ingredients: Croscarmellose Sodium, D&amp;C Yellow #10 Aluminum Lake, FD&amp;C Blue #1 Aluminum Lake, FD&amp;C Red #40 Aluminum Lake, FD&amp;C Yellow #6 Aluminum Lake, Magnesium Stearate, Microcrystalline Cellulose, Polyethylene Glycol, Polyvinyl Alcohol, Povidone, Pregelatinized Starch, Talc, and Titanium Dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>82804-995-55</NDCCode>
    <PackageDescription>500 TABLET in 1 BOTTLE (82804-995-55) </PackageDescription>
    <NDC11Code>82804-0995-55</NDC11Code>
    <ProductNDC>82804-995</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Phenazopyridine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20231019</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2024-05-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240506</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Phenazopyridine Hydrochloride is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine Hydrochloride for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine Hydrochloride is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine Hydrochloride should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine Hydrochloride and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).</IndicationAndUsage>
    <Description>Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine Hydrochloride oral tablets contain the following inactive ingredients: Croscarmellose Sodium, D&amp;C Yellow #10 Aluminum Lake, FD&amp;C Blue #1 Aluminum Lake, FD&amp;C Red #40 Aluminum Lake, FD&amp;C Yellow #6 Aluminum Lake, Magnesium Stearate, Microcrystalline Cellulose, Polyethylene Glycol, Polyvinyl Alcohol, Povidone, Pregelatinized Starch, Talc, and Titanium Dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>82804-995-90</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE (82804-995-90) </PackageDescription>
    <NDC11Code>82804-0995-90</NDC11Code>
    <ProductNDC>82804-995</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Phenazopyridine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20231019</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2024-05-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240506</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Phenazopyridine Hydrochloride is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine Hydrochloride for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine Hydrochloride is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine Hydrochloride should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine Hydrochloride and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).</IndicationAndUsage>
    <Description>Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine Hydrochloride oral tablets contain the following inactive ingredients: Croscarmellose Sodium, D&amp;C Yellow #10 Aluminum Lake, FD&amp;C Blue #1 Aluminum Lake, FD&amp;C Red #40 Aluminum Lake, FD&amp;C Yellow #6 Aluminum Lake, Magnesium Stearate, Microcrystalline Cellulose, Polyethylene Glycol, Polyvinyl Alcohol, Povidone, Pregelatinized Starch, Talc, and Titanium Dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>82804-995-96</NDCCode>
    <PackageDescription>96 TABLET in 1 BOTTLE (82804-995-96) </PackageDescription>
    <NDC11Code>82804-0995-96</NDC11Code>
    <ProductNDC>82804-995</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Phenazopyridine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20231019</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2024-05-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240506</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Phenazopyridine Hydrochloride is indicated for the symptomatic relief of pain, burning, urgency frequency, and other discomforts arising from irritation of the mucosa of the lower urinary tract caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine Hydrochloride for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. The drug should be used for symptomatic relief of pain and not as a substitute for specific surgery or antimicrobial therapy. Phenazopyridine Hydrochloride is compatible with antimicrobial therapy and can help relieve pain and discomfort during the interval before antimicrobial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine Hydrochloride should not exceed 2 days. There is no evidence that the combined administration of Phenazopyridine Hydrochloride and an antimicrobial provides greater benefit than administration of the antimicrobial alone after 2 days. (See Dosage and Administration.).</IndicationAndUsage>
    <Description>Phenazopyridine Hydrochloride is a reddish-brown, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. Following is the structural formula. Phenazopyridine Hydrochloride oral tablets contain the following inactive ingredients: Croscarmellose Sodium, D&amp;C Yellow #10 Aluminum Lake, FD&amp;C Blue #1 Aluminum Lake, FD&amp;C Red #40 Aluminum Lake, FD&amp;C Yellow #6 Aluminum Lake, Magnesium Stearate, Microcrystalline Cellulose, Polyethylene Glycol, Polyvinyl Alcohol, Povidone, Pregelatinized Starch, Talc, and Titanium Dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>82804-001-30</NDCCode>
    <PackageDescription>30 CAPSULE, GELATIN COATED in 1 BOTTLE (82804-001-30) </PackageDescription>
    <NDC11Code>82804-0001-30</NDC11Code>
    <ProductNDC>82804-001</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lubiprostone</ProprietaryName>
    <NonProprietaryName>Lubiprostone</NonProprietaryName>
    <DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230101</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA021908</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>LUBIPROSTONE</SubstanceName>
    <StrengthNumber>24</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Chloride Channel Activator [EPC], Chloride Channel Activators [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-08-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230824</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lubiprostone is a chloride channel activator indicated for the treatment of: 1 chronic idiopathic constipation (CIC) in adults. (1.1), 2 opioid-induced constipation (OIC) in adult patients with chronic, non-cancer pain, including patients with chronic pain related to prior cancer or its treatment who do not require frequent (e.g., weekly) opioid dosage escalation. (1.2)oLimitations of Use:Effectiveness of lubiprostone in the treatment of OIC in patients taking diphenylheptane opioids (e.g., methadone) has not been established. (1.2, 7.1), 3 irritable bowel syndrome with constipation (IBS-C) in women ≥ 18 years old. (1.3).</IndicationAndUsage>
    <Description>Lubiprostone is a chloride channel activator for oral use. The chemical name for lubiprostone is (–)-7-[(2R,4aR,5R,7aR)-2-(1,1-difluoropentyl)-2-hydroxy-6-oxooctahydrocyclopenta[b]pyran-5-yl]heptanoic acid. The molecular formula of lubiprostone is C20H32F2O5 with a molecular weight of 390.46 and a chemical structure as follows. Lubiprostone drug substance occurs as white, odorless crystals or crystalline powder, is very soluble in ether and ethanol, and is practically insoluble in hexane and water. Lubiprostone is available as an imprinted, oval, soft gelatin capsule in two strengths. Pink capsules contain 8 mcg of lubiprostone and the following inactive ingredients: ferric oxide, gelatin, medium-chain triglycerides, purified water, sorbitol, and titanium dioxide. Orange capsules contain 24 mcg of lubiprostone and the following inactive ingredients: D&amp;C Yellow #10, FD&amp;C Red #40, gelatin, medium-chain triglycerides, purified water, and sorbitol.</Description>
  </NDC>
  <NDC>
    <NDCCode>82804-001-60</NDCCode>
    <PackageDescription>60 CAPSULE, GELATIN COATED in 1 BOTTLE (82804-001-60) </PackageDescription>
    <NDC11Code>82804-0001-60</NDC11Code>
    <ProductNDC>82804-001</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lubiprostone</ProprietaryName>
    <NonProprietaryName>Lubiprostone</NonProprietaryName>
    <DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230101</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA021908</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>LUBIPROSTONE</SubstanceName>
    <StrengthNumber>24</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Chloride Channel Activator [EPC], Chloride Channel Activators [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-08-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230824</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lubiprostone is a chloride channel activator indicated for the treatment of: 1 chronic idiopathic constipation (CIC) in adults. (1.1), 2 opioid-induced constipation (OIC) in adult patients with chronic, non-cancer pain, including patients with chronic pain related to prior cancer or its treatment who do not require frequent (e.g., weekly) opioid dosage escalation. (1.2)oLimitations of Use:Effectiveness of lubiprostone in the treatment of OIC in patients taking diphenylheptane opioids (e.g., methadone) has not been established. (1.2, 7.1), 3 irritable bowel syndrome with constipation (IBS-C) in women ≥ 18 years old. (1.3).</IndicationAndUsage>
    <Description>Lubiprostone is a chloride channel activator for oral use. The chemical name for lubiprostone is (–)-7-[(2R,4aR,5R,7aR)-2-(1,1-difluoropentyl)-2-hydroxy-6-oxooctahydrocyclopenta[b]pyran-5-yl]heptanoic acid. The molecular formula of lubiprostone is C20H32F2O5 with a molecular weight of 390.46 and a chemical structure as follows. Lubiprostone drug substance occurs as white, odorless crystals or crystalline powder, is very soluble in ether and ethanol, and is practically insoluble in hexane and water. Lubiprostone is available as an imprinted, oval, soft gelatin capsule in two strengths. Pink capsules contain 8 mcg of lubiprostone and the following inactive ingredients: ferric oxide, gelatin, medium-chain triglycerides, purified water, sorbitol, and titanium dioxide. Orange capsules contain 24 mcg of lubiprostone and the following inactive ingredients: D&amp;C Yellow #10, FD&amp;C Red #40, gelatin, medium-chain triglycerides, purified water, and sorbitol.</Description>
  </NDC>
  <NDC>
    <NDCCode>82804-001-90</NDCCode>
    <PackageDescription>90 CAPSULE, GELATIN COATED in 1 BOTTLE (82804-001-90) </PackageDescription>
    <NDC11Code>82804-0001-90</NDC11Code>
    <ProductNDC>82804-001</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lubiprostone</ProprietaryName>
    <NonProprietaryName>Lubiprostone</NonProprietaryName>
    <DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230101</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA021908</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>LUBIPROSTONE</SubstanceName>
    <StrengthNumber>24</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Chloride Channel Activator [EPC], Chloride Channel Activators [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-08-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230824</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lubiprostone is a chloride channel activator indicated for the treatment of: 1 chronic idiopathic constipation (CIC) in adults. (1.1), 2 opioid-induced constipation (OIC) in adult patients with chronic, non-cancer pain, including patients with chronic pain related to prior cancer or its treatment who do not require frequent (e.g., weekly) opioid dosage escalation. (1.2)oLimitations of Use:Effectiveness of lubiprostone in the treatment of OIC in patients taking diphenylheptane opioids (e.g., methadone) has not been established. (1.2, 7.1), 3 irritable bowel syndrome with constipation (IBS-C) in women ≥ 18 years old. (1.3).</IndicationAndUsage>
    <Description>Lubiprostone is a chloride channel activator for oral use. The chemical name for lubiprostone is (–)-7-[(2R,4aR,5R,7aR)-2-(1,1-difluoropentyl)-2-hydroxy-6-oxooctahydrocyclopenta[b]pyran-5-yl]heptanoic acid. The molecular formula of lubiprostone is C20H32F2O5 with a molecular weight of 390.46 and a chemical structure as follows. Lubiprostone drug substance occurs as white, odorless crystals or crystalline powder, is very soluble in ether and ethanol, and is practically insoluble in hexane and water. Lubiprostone is available as an imprinted, oval, soft gelatin capsule in two strengths. Pink capsules contain 8 mcg of lubiprostone and the following inactive ingredients: ferric oxide, gelatin, medium-chain triglycerides, purified water, sorbitol, and titanium dioxide. Orange capsules contain 24 mcg of lubiprostone and the following inactive ingredients: D&amp;C Yellow #10, FD&amp;C Red #40, gelatin, medium-chain triglycerides, purified water, and sorbitol.</Description>
  </NDC>
  <NDC>
    <NDCCode>82804-015-30</NDCCode>
    <PackageDescription>30 TABLET in 1 BOTTLE (82804-015-30) </PackageDescription>
    <NDC11Code>82804-0015-30</NDC11Code>
    <ProductNDC>82804-015</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gabapentin</ProprietaryName>
    <NonProprietaryName>Gabapentin</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20160411</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA205101</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>GABAPENTIN</SubstanceName>
    <StrengthNumber>600</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-10-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231003</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Gabapentin is indicated for: 1 Management of postherpetic neuralgia in adults, 2 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy.</IndicationAndUsage>
    <Description>The active ingredient in gabapentin capsules and tablets, USP is gabapentin, which has the chemical name 1-(aminomethyl) cyclohexaneacetic acid. The molecular formula of gabapentin is C9H17NO2 and the molecular weight is 171.24. The structural formula of gabapentin is. Gabapentin, USP is a white to off-white crystalline solid with a pKa1 of 4.72±0.10 and a pKa2 of 10.27±0.29. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient is -1.083±0.235 at 25°C temperature. Each gabapentin capsule contains 100 mg, 300 mg or 400 mg of gabapentin, USP and the following inactive ingredients: pregelatinized starch (maize), and talc. The 100 mg capsule shell contains gelatin, sodium lauryl sulfate (SLS) and titanium dioxide. The 300 mg capsule shell contains gelatin, titanium dioxide, FD&amp;C Red 40, D&amp;C Yellow 10, and sodium lauryl sulfate (SLS). The 400mg capsule shell contains gelatin, titanium dioxide, sodium lauryl sulfate (SLS), D&amp;C Yellow 10, and FD&amp;C Red 40. The imprinting ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, and potassium hydroxide. Each gabapentin tablet contains 600 mg or 800 mg of gabapentin, USP and the following inactive ingredients: poloxamer 407, mannitol, magnesium stearate, hydroxypropyl cellulose, talc, copovidone, crospovidone, colloidal silicon dioxide and coating agent contains hypromellose, titanium dioxide, polyethylene glycol and talc.</Description>
  </NDC>
  <NDC>
    <NDCCode>82804-015-60</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (82804-015-60) </PackageDescription>
    <NDC11Code>82804-0015-60</NDC11Code>
    <ProductNDC>82804-015</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gabapentin</ProprietaryName>
    <NonProprietaryName>Gabapentin</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20160411</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA205101</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>GABAPENTIN</SubstanceName>
    <StrengthNumber>600</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-10-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231003</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Gabapentin is indicated for: 1 Management of postherpetic neuralgia in adults, 2 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy.</IndicationAndUsage>
    <Description>The active ingredient in gabapentin capsules and tablets, USP is gabapentin, which has the chemical name 1-(aminomethyl) cyclohexaneacetic acid. The molecular formula of gabapentin is C9H17NO2 and the molecular weight is 171.24. The structural formula of gabapentin is. Gabapentin, USP is a white to off-white crystalline solid with a pKa1 of 4.72±0.10 and a pKa2 of 10.27±0.29. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient is -1.083±0.235 at 25°C temperature. Each gabapentin capsule contains 100 mg, 300 mg or 400 mg of gabapentin, USP and the following inactive ingredients: pregelatinized starch (maize), and talc. The 100 mg capsule shell contains gelatin, sodium lauryl sulfate (SLS) and titanium dioxide. The 300 mg capsule shell contains gelatin, titanium dioxide, FD&amp;C Red 40, D&amp;C Yellow 10, and sodium lauryl sulfate (SLS). The 400mg capsule shell contains gelatin, titanium dioxide, sodium lauryl sulfate (SLS), D&amp;C Yellow 10, and FD&amp;C Red 40. The imprinting ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, and potassium hydroxide. Each gabapentin tablet contains 600 mg or 800 mg of gabapentin, USP and the following inactive ingredients: poloxamer 407, mannitol, magnesium stearate, hydroxypropyl cellulose, talc, copovidone, crospovidone, colloidal silicon dioxide and coating agent contains hypromellose, titanium dioxide, polyethylene glycol and talc.</Description>
  </NDC>
  <NDC>
    <NDCCode>82804-015-90</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE (82804-015-90) </PackageDescription>
    <NDC11Code>82804-0015-90</NDC11Code>
    <ProductNDC>82804-015</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gabapentin</ProprietaryName>
    <NonProprietaryName>Gabapentin</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20160411</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA205101</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>GABAPENTIN</SubstanceName>
    <StrengthNumber>600</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-10-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231003</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Gabapentin is indicated for: 1 Management of postherpetic neuralgia in adults, 2 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy.</IndicationAndUsage>
    <Description>The active ingredient in gabapentin capsules and tablets, USP is gabapentin, which has the chemical name 1-(aminomethyl) cyclohexaneacetic acid. The molecular formula of gabapentin is C9H17NO2 and the molecular weight is 171.24. The structural formula of gabapentin is. Gabapentin, USP is a white to off-white crystalline solid with a pKa1 of 4.72±0.10 and a pKa2 of 10.27±0.29. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient is -1.083±0.235 at 25°C temperature. Each gabapentin capsule contains 100 mg, 300 mg or 400 mg of gabapentin, USP and the following inactive ingredients: pregelatinized starch (maize), and talc. The 100 mg capsule shell contains gelatin, sodium lauryl sulfate (SLS) and titanium dioxide. The 300 mg capsule shell contains gelatin, titanium dioxide, FD&amp;C Red 40, D&amp;C Yellow 10, and sodium lauryl sulfate (SLS). The 400mg capsule shell contains gelatin, titanium dioxide, sodium lauryl sulfate (SLS), D&amp;C Yellow 10, and FD&amp;C Red 40. The imprinting ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, and potassium hydroxide. Each gabapentin tablet contains 600 mg or 800 mg of gabapentin, USP and the following inactive ingredients: poloxamer 407, mannitol, magnesium stearate, hydroxypropyl cellulose, talc, copovidone, crospovidone, colloidal silicon dioxide and coating agent contains hypromellose, titanium dioxide, polyethylene glycol and talc.</Description>
  </NDC>
  <NDC>
    <NDCCode>82804-032-30</NDCCode>
    <PackageDescription>30 CAPSULE in 1 BOTTLE (82804-032-30) </PackageDescription>
    <NDC11Code>82804-0032-30</NDC11Code>
    <ProductNDC>82804-032</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tacrolimus</ProprietaryName>
    <NonProprietaryName>Tacrolimus</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20090810</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065461</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>TACROLIMUS</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-10-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231025</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tacrolimus capsules are a calcineurin-inhibitor immunosuppressant indicated for the prophylaxis of organ rejection in adult patients receiving allogeneic liver, kidney, or heart transplants, and pediatric patients receiving allogenic liver transplants in combination with other immunosuppressants. (1.1).</IndicationAndUsage>
    <Description>Tacrolimus, previously known as FK506, is the active ingredient in tacrolimus capsules. Tacrolimus is a calcineurin-inhibitor immunosuppressant produced by Streptomyces tsukubaensis. Chemically, tacrolimus is designated as [3S-[3R*[E(1S*,3S*,4S*)],4S*,5R*,8S*,9E,12R* ,14R*, 15S*,16R*,18S*,19S*,26aR*]]-5,6,8,11,12,13,14,15,16,17,18,19,24,25,26,26a-hexadecahydro-5,19-dihydroxy-3-[2-(4-hydroxy-3-methoxycyclohexyl)-1-methylethenyl]-14,16-dimethoxy-4,10,12,18-tetramethyl-8-(2-propenyl)-15,19-epoxy-3H-pyrido[2,1-c][1,4]oxaazacyclotricosine-1,7,20,21(4H,23H)-tetrone, monohydrate. The chemical structure of tacrolimus is. Tacrolimus has a molecular formula of C44H69NO12H2O and a formula weight of 822.03. Tacrolimus appears as white crystals or crystalline powder. It is practically insoluble in water, freely soluble in ethanol, and very soluble in methanol and chloroform. Tacrolimus capsules, USP are available for oral administration containing the equivalent of 0.5 mg, 1 mg or 5 mg of anhydrous tacrolimus. In addition, each capsule contains the following inactive ingredients: croscarmellose sodium, hypromellose, lactose monohydrate, and magnesium stearate. The tacrolimus capsule shell for 0.5 mg strength consists of gelatin, titanium dioxide and yellow iron oxide. The tacrolimus capsule shell for 1 mg strength consists of black iron oxide, gelatin, red iron oxide, titanium dioxide, and yellow iron oxide. The tacrolimus capsule shell for 5 mg strength consists of red iron oxide, gelatin, and titanium dioxide. Tacrolimus capsules, USP 0.5 mg, 1 mg and 5 mg are printed with edible black ink. The black ink is comprised of ammonia, black iron oxide, butyl alcohol, potassium hydroxide, propylene glycol, and shellac. USP Dissolution test 2 and Organic Impurities procedure 2 used.</Description>
  </NDC>
  <NDC>
    <NDCCode>82804-032-60</NDCCode>
    <PackageDescription>60 CAPSULE in 1 BOTTLE (82804-032-60) </PackageDescription>
    <NDC11Code>82804-0032-60</NDC11Code>
    <ProductNDC>82804-032</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tacrolimus</ProprietaryName>
    <NonProprietaryName>Tacrolimus</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20090810</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065461</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>TACROLIMUS</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-10-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231025</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tacrolimus capsules are a calcineurin-inhibitor immunosuppressant indicated for the prophylaxis of organ rejection in adult patients receiving allogeneic liver, kidney, or heart transplants, and pediatric patients receiving allogenic liver transplants in combination with other immunosuppressants. (1.1).</IndicationAndUsage>
    <Description>Tacrolimus, previously known as FK506, is the active ingredient in tacrolimus capsules. Tacrolimus is a calcineurin-inhibitor immunosuppressant produced by Streptomyces tsukubaensis. Chemically, tacrolimus is designated as [3S-[3R*[E(1S*,3S*,4S*)],4S*,5R*,8S*,9E,12R* ,14R*, 15S*,16R*,18S*,19S*,26aR*]]-5,6,8,11,12,13,14,15,16,17,18,19,24,25,26,26a-hexadecahydro-5,19-dihydroxy-3-[2-(4-hydroxy-3-methoxycyclohexyl)-1-methylethenyl]-14,16-dimethoxy-4,10,12,18-tetramethyl-8-(2-propenyl)-15,19-epoxy-3H-pyrido[2,1-c][1,4]oxaazacyclotricosine-1,7,20,21(4H,23H)-tetrone, monohydrate. The chemical structure of tacrolimus is. Tacrolimus has a molecular formula of C44H69NO12H2O and a formula weight of 822.03. Tacrolimus appears as white crystals or crystalline powder. It is practically insoluble in water, freely soluble in ethanol, and very soluble in methanol and chloroform. Tacrolimus capsules, USP are available for oral administration containing the equivalent of 0.5 mg, 1 mg or 5 mg of anhydrous tacrolimus. In addition, each capsule contains the following inactive ingredients: croscarmellose sodium, hypromellose, lactose monohydrate, and magnesium stearate. The tacrolimus capsule shell for 0.5 mg strength consists of gelatin, titanium dioxide and yellow iron oxide. The tacrolimus capsule shell for 1 mg strength consists of black iron oxide, gelatin, red iron oxide, titanium dioxide, and yellow iron oxide. The tacrolimus capsule shell for 5 mg strength consists of red iron oxide, gelatin, and titanium dioxide. Tacrolimus capsules, USP 0.5 mg, 1 mg and 5 mg are printed with edible black ink. The black ink is comprised of ammonia, black iron oxide, butyl alcohol, potassium hydroxide, propylene glycol, and shellac. USP Dissolution test 2 and Organic Impurities procedure 2 used.</Description>
  </NDC>
  <NDC>
    <NDCCode>82804-032-90</NDCCode>
    <PackageDescription>90 CAPSULE in 1 BOTTLE (82804-032-90) </PackageDescription>
    <NDC11Code>82804-0032-90</NDC11Code>
    <ProductNDC>82804-032</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tacrolimus</ProprietaryName>
    <NonProprietaryName>Tacrolimus</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20090810</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065461</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>TACROLIMUS</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-10-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231025</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tacrolimus capsules are a calcineurin-inhibitor immunosuppressant indicated for the prophylaxis of organ rejection in adult patients receiving allogeneic liver, kidney, or heart transplants, and pediatric patients receiving allogenic liver transplants in combination with other immunosuppressants. (1.1).</IndicationAndUsage>
    <Description>Tacrolimus, previously known as FK506, is the active ingredient in tacrolimus capsules. Tacrolimus is a calcineurin-inhibitor immunosuppressant produced by Streptomyces tsukubaensis. Chemically, tacrolimus is designated as [3S-[3R*[E(1S*,3S*,4S*)],4S*,5R*,8S*,9E,12R* ,14R*, 15S*,16R*,18S*,19S*,26aR*]]-5,6,8,11,12,13,14,15,16,17,18,19,24,25,26,26a-hexadecahydro-5,19-dihydroxy-3-[2-(4-hydroxy-3-methoxycyclohexyl)-1-methylethenyl]-14,16-dimethoxy-4,10,12,18-tetramethyl-8-(2-propenyl)-15,19-epoxy-3H-pyrido[2,1-c][1,4]oxaazacyclotricosine-1,7,20,21(4H,23H)-tetrone, monohydrate. The chemical structure of tacrolimus is. Tacrolimus has a molecular formula of C44H69NO12H2O and a formula weight of 822.03. Tacrolimus appears as white crystals or crystalline powder. It is practically insoluble in water, freely soluble in ethanol, and very soluble in methanol and chloroform. Tacrolimus capsules, USP are available for oral administration containing the equivalent of 0.5 mg, 1 mg or 5 mg of anhydrous tacrolimus. In addition, each capsule contains the following inactive ingredients: croscarmellose sodium, hypromellose, lactose monohydrate, and magnesium stearate. The tacrolimus capsule shell for 0.5 mg strength consists of gelatin, titanium dioxide and yellow iron oxide. The tacrolimus capsule shell for 1 mg strength consists of black iron oxide, gelatin, red iron oxide, titanium dioxide, and yellow iron oxide. The tacrolimus capsule shell for 5 mg strength consists of red iron oxide, gelatin, and titanium dioxide. Tacrolimus capsules, USP 0.5 mg, 1 mg and 5 mg are printed with edible black ink. The black ink is comprised of ammonia, black iron oxide, butyl alcohol, potassium hydroxide, propylene glycol, and shellac. USP Dissolution test 2 and Organic Impurities procedure 2 used.</Description>
  </NDC>
  <NDC>
    <NDCCode>82804-043-30</NDCCode>
    <PackageDescription>30 TABLET, CHEWABLE in 1 BOTTLE, PLASTIC (82804-043-30) </PackageDescription>
    <NDC11Code>82804-0043-30</NDC11Code>
    <ProductNDC>82804-043</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Simethicone 80 Mg</ProprietaryName>
    <NonProprietaryName>Simethicone</NonProprietaryName>
    <DosageFormName>TABLET, CHEWABLE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180424</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M002</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>DIMETHICONE</SubstanceName>
    <StrengthNumber>80</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Skin Barrier Activity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-10-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231116</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>relieves bloating, pressure and fullness commonly referred to as gas.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>82804-043-60</NDCCode>
    <PackageDescription>60 TABLET, CHEWABLE in 1 BOTTLE, PLASTIC (82804-043-60) </PackageDescription>
    <NDC11Code>82804-0043-60</NDC11Code>
    <ProductNDC>82804-043</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Simethicone 80 Mg</ProprietaryName>
    <NonProprietaryName>Simethicone</NonProprietaryName>
    <DosageFormName>TABLET, CHEWABLE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180424</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M002</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>DIMETHICONE</SubstanceName>
    <StrengthNumber>80</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Skin Barrier Activity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-10-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231116</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>relieves bloating, pressure and fullness commonly referred to as gas.</IndicationAndUsage>
  </NDC>
</NDCList>