{
"NDC": [
{
"NDCCode": "83209-143-30",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (83209-143-30) ",
"NDC11Code": "83209-0143-30",
"ProductNDC": "83209-143",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lovastatin",
"NonProprietaryName": "Lovastatin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250225",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075991",
"LabelerName": "Boswell Pharmacy Services LLC d/b/a BPS Wholesale",
"SubstanceName": "LOVASTATIN",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-10-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250225",
"SamplePackage": "N",
"IndicationAndUsage": "Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.",
"Description": "Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus.After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S -[1α( R*), 3α, 7β, 8β(2 S *,4 S *),8aβ]]-1,2,3, 7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H-pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24H 36O 5and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, pregelatinized starch, sodium starch glycolate, butylated hydroxyanisole and talc. Butylated hydroxyanisole (BHA) is added as a preservative."
},
{
"NDCCode": "83209-150-30",
"PackageDescription": "30 CAPSULE, DELAYED RELEASE in 1 BLISTER PACK (83209-150-30) ",
"NDC11Code": "83209-0150-30",
"ProductNDC": "83209-150",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omeprazole",
"NonProprietaryName": "Omeprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20240612",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212977",
"LabelerName": "Boswell Pharmacy Services LLC d/b/a BPS Wholesale",
"SubstanceName": "OMEPRAZOLE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240612",
"SamplePackage": "N",
"IndicationAndUsage": "Omeprazole delayed-release capsules are a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults ( 1.1) , 2 Eradication of Helicobacter pylorito reduce the risk of duodenal ulcer recurrence in adults ( 1.2) , 3 Treatment of active benign gastric ulcer in adults ( 1.3) , 4 Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 2 years of age and older ( 1.4) , 5 Treatment of erosive esophagitis (EE) due to acid-mediated GERD in patients 2 years of age and older ( 1.5) , 6 Maintenance of healing of EE due to acid-mediated GERD in patients 2 years of age and older ( 1.6) , 7 Pathologic hypersecretory conditions in adults ( 1.7) .",
"Description": "The active ingredient in omeprazole delayed-release capsule, USP is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1 H-benzimidazole, a compound that inhibits gastric acid secretion. Its molecular formula is C 17H 19N 3O 3S, with a molecular weight of 345.42. The structural formula is:. Omeprazole is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg or 20 mg of omeprazole in the form of enteric-coated granules. The 10 mg and 20 mg capsule contains the following inactive ingredients: crospovidone, dibasic sodium phosphate, hypromellose, magnesium hydroxide granules (with corn starch), methacrylicacid and ethyl acrylate copolymer dispersion, polyethylene glycol, polysorbate 80, polyvinyl alcohol, polyvinyl alcohol-polyethylene glycol graft copolymer, purified water, silicon dioxide, sodium lauryl sulfate, sugar spheres (sucrose, corn starch, and purified water), talc, and titanium dioxide. The capsule shells for the 10 and 20 mg have the following inactive ingredients: gelatin and titanium dioxide. The ink used for printing contains: black iron oxide, potassium hydroxide, propylene glycol, shellac, and strong ammonia solution. Omeprazole delayed-release capsules meet USP Dissolution Test 2."
},
{
"NDCCode": "83209-190-30",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (83209-190-30) ",
"NDC11Code": "83209-0190-30",
"ProductNDC": "83209-190",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Naproxen",
"NonProprietaryName": "Naproxen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240823",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078250",
"LabelerName": "Boswell Pharmacy Services LLC d/b/a BPS Wholesale",
"SubstanceName": "NAPROXEN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240823",
"SamplePackage": "N",
"IndicationAndUsage": "Naproxen tablets and naproxen sodium tablets are indicated for. the relief of the signs and symptoms of: 1 rheumatoid arthritis, 2 osteoarthritis, 3 ankylosing spondylitis, 4 Polyarticular Juvenile Idiopathic Arthritis.",
"Description": "Naproxen Tablets, USP and Naproxen Sodium Tablets, USP are nonsteroidal anti-inflammatory drugs available as follows. Naproxen Tablets, USP are available as follows for oral administration. 250 mg: circular, light orange colored, flat, uncoated tablets, engraved with ‘G’ and ‘32’ on either side of a break line on one side and ‘250’ on the other side. 375 mg: oval, light orange colored, biconvex, uncoated tablets, engraved with ‘G32’ on one side and ‘375’ on the other side. 500 mg: capsule shaped, light orange colored, uncoated tablets, debossed with ‘G’ and ‘32’ on either side of a break line on one side and ‘500’ on the other side. The inactive ingredients are croscarmellose sodium, iron oxide red, iron oxide yellow, magnesium stearate, microcrystalline cellulose and povidone. The inactive ingredients are colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone and talc. The coating suspension for the naproxen sodium 275 mg and 550 mg tablet contains FD&C blue#2, iron oxide red, hypromellose, polyethylene glycol and titanium dioxide. Naproxen, USP is a propionic acid derivative related to the arylacetic acid group of nonsteroidal anti-inflammatory drugs. The chemical names for naproxen, USP and naproxen sodium, USP are (S)-6-methoxy-α-methyl-2-naphthaleneacetic acid and (S)-6-methoxy-α-methyl-2-naphthaleneacetic acid, sodium salt, respectively. Naproxen, USP has a molecular weight of 230.26 g/mol and a molecular formula of C 14H 14O 3. Naproxen sodium, USP has a molecular weight of 252.24 g/mol and a molecular formula of C 14H 13NaO 3. Naproxen, USP and naproxen sodium, USP have the following structures, respectively:. Naproxen, USP is a white to off-white crystalline powder. It is soluble in chloroform, dehydrated alcohol and alcohol; sparingly soluble in ether, insoluble in water. Naproxen sodium, USP is a white to almost white crystalline powder, soluble in water and methanol; sparingly soluble in ethanol."
},
{
"NDCCode": "83209-192-30",
"PackageDescription": "30 CAPSULE in 1 BLISTER PACK (83209-192-30) ",
"NDC11Code": "83209-0192-30",
"ProductNDC": "83209-192",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluoxetine",
"NonProprietaryName": "Fluoxetine Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240816",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078619",
"LabelerName": "Boswell Pharmacy Services LLC d/b/a BPS Wholesale",
"SubstanceName": "FLUOXETINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-10-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240816",
"SamplePackage": "N",
"IndicationAndUsage": "Fluoxetine capsules are indicated for the treatment of. Fluoxetine capsules and Olanzapine in Combination are indicated for the treatment of. Fluoxetine capsules monotherapy is not indicated for the treatment of depressive episodes associated with Bipolar I Disorder or the treatment of treatment resistant depression. When using fluoxetine capsules and olanzapine in combination, also refer to the Clinical Studies section of the package insert for Symbyax ®.",
"Description": "Fluoxetine capsules, USP are a selective serotonin reuptake inhibitor for oral administration. It is designated (±)-N-methyl-3-phenyl-3-[(α,α,α-trifluoro- p-tolyl)oxy]propylamine hydrochloride and has the molecular formula of C 17H 18F 3NOHCl. Its molecular weight is 345.79. The structural formula is:. Fluoxetine hydrochloride is a white to off-white crystalline solid with a solubility of 14 mg/mL in water. Each capsule contains fluoxetine hydrochloride equivalent to 10 mg (32.3 μmol), 20 mg (64.7 μmol), or 40 mg (129.3 μmol) of fluoxetine. The capsules also contain the following inactive ingredients: colloidal silicon dioxide, FD&C Blue #1, gelatin, pregelatinized starch (maize), sodium lauryl sulphate, titanium dioxide and yellow iron oxide. In addition 40 mg also contains FD&C Yellow #6. The capsules are printed with edible ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution."
},
{
"NDCCode": "83209-220-30",
"PackageDescription": "30 CAPSULE in 1 BLISTER PACK (83209-220-30) ",
"NDC11Code": "83209-0220-30",
"ProductNDC": "83209-220",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lithium Carbonate",
"NonProprietaryName": "Lithium Carbonate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240821",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079139",
"LabelerName": "Boswell Pharmacy Services LLC d/b/a BPS Wholesale",
"SubstanceName": "LITHIUM CARBONATE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Mood Stabilizer [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240821",
"SamplePackage": "N",
"IndicationAndUsage": "Lithium is a mood-stabilizing agent indicated as monotherapy for the treatment of bipolar I disorder: 1 Treatment of acute manic and mixed episodes in patients 7 years and older [see Clinical Studies ( 14)] , 2 Maintenance treatment in patients 7 years and older [see Clinical Studies (14)].",
"Description": "Each capsule for oral administration contains lithium carbonate, USP 150 mg, 300 mg or 600 mg and the following inactive ingredients: colloidal silicon dioxide, gelatin, sodium lauryl sulfate, talc, titanium dioxide, FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and the imprinting ink contains shellac, propylene glycol, potassium hydroxide, and black iron oxide. Lithium is an element of the alkali-metal group with atomic number 3, atomic weight 6.94, and an emission line at 671 nm on the flame photometer. Lithium Carbonate, USP is a white, crystalline powder with molecular formula Li 2CO 3and molecular weight 73.89."
},
{
"NDCCode": "83209-303-30",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (83209-303-30) ",
"NDC11Code": "83209-0303-30",
"ProductNDC": "83209-303",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buspirone Hydrochloride",
"NonProprietaryName": "Buspirone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20251113",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075022",
"LabelerName": "Boswell Pharmacy Services LLC d/b/a BPS Wholesale",
"SubstanceName": "BUSPIRONE HYDROCHLORIDE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2025-11-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251113",
"SamplePackage": "N",
"IndicationAndUsage": "Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone hydrochloride tablets has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone hydrochloride tablets relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, III 1as follows:. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge,” irritability, impatience.",
"Description": "Buspirone hydrochloride tablets, USP are an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound. Chemically, buspirone hydrochloride is N-[4-[4-(2-pyrimidinyl)-1-piperazinyl]butyl]-1,1-cyclopentanediacetamide monohydrochloride, which can be represented by the following structural formula:. C 21H 31N 5O 2HCl M.W. 421.96. Each tablet, for oral administration, contains 5 mg, 10 mg, 15 mg or 30 mg of buspirone hydrochloride, USP (equivalent to 4.6 mg, 9.1 mg, 13.7 mg, and 27.4 mg of buspirone free base, respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablets are scored such that they may be bisected or trisected. Thus, a single tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two-thirds of a tablet), 7.5 mg (one-half of a tablet), or 5 mg (one-third of a tablet). The 30 mg tablets are scored such that they may be bisected or trisected. Thus, a single tablet can provide the following doses: 30 mg (entire tablet), 20 mg (two-thirds of a tablet), 15 mg (one-half of a tablet), or 10 mg (one-third of a tablet). Buspirone hydrochloride tablets, USP contain the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate."
},
{
"NDCCode": "83209-399-30",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (83209-399-30) ",
"NDC11Code": "83209-0399-30",
"ProductNDC": "83209-399",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine Besylate",
"NonProprietaryName": "Amlodipine Besylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20251021",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203245",
"LabelerName": "Boswell Pharmacy Services LLC d/b/a BPS Wholesale",
"SubstanceName": "AMLODIPINE BESYLATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Active",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251021",
"SamplePackage": "N",
"IndicationAndUsage": "Amlodipine besylate tablets are calcium channel blockers and may be used alone or in combination with other antihypertensive and antianginal agents for the treatment of: 1 Hypertension ( 1.1) Amlodipine besylate tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions., 2 Coronary Artery Disease ( 1.2) Chronic Stable AnginaVasospastic Angina (Prinzmetal's or Variant Angina)Angiographically Documented Coronary Artery Disease in patients without heart failure or an ejection fraction < 40%.",
"Description": "Amlodipine besylate, USP is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate, USP is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl] 4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C 20H 25ClN 2O 5C 6H 6O 3S and its structural formula is:. Amlodipine besylate, USP is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlohowdipinebesylate Tablets, USP are formulated as yellow tablets equivalent to 2.5 mg or white tablets equivalent to 5 and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, USP, each tablet contains the following inactive ingredients: colloidal silicon dioxide,magnesium stearate,microcrystalline cellulose and sodium starch glycolate. The 2.5 mg strength additionally contains ferric oxide yellow as coloring agent."
},
{
"NDCCode": "83209-424-30",
"PackageDescription": "30 CAPSULE in 1 BLISTER PACK (83209-424-30) ",
"NDC11Code": "83209-0424-30",
"ProductNDC": "83209-424",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxepin Hydrochloride",
"NonProprietaryName": "Doxepin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240904",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215710",
"LabelerName": "Boswell Pharmacy Services LLC d/b/a BPS Wholesale",
"SubstanceName": "DOXEPIN HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tricyclic Antidepressant [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240904",
"SamplePackage": "N",
"IndicationAndUsage": "Doxepin Hydrochloride Capsules, USP are recommended for the treatment of: 1 Psychoneurotic patients with depression and/or anxiety., 2 Depression and/or anxiety associated with alcoholism (not to be taken concomitantly with alcohol)., 3 Depression and/or anxiety associated with organic disease (the possibility of drug interaction should be considered if the patient is receiving other drugs concomitantly)., 4 Psychotic depressive disorders with associated anxiety including involutional depression and manic-depressive disorders.",
"Description": "Doxepin hydrochloride is one of a class of psychotherapeutic agents known as dibenzoxepin tricyclic compounds. The molecular formula of the compound is C 19H 21NO HCl having a molecular weight of 315.84. It is a white to almost white crystalline powder freely soluble in water, in alcohol and methylene chloride. It may be represented by the following structural formula:. Chemically, doxepin hydrochloride is a dibenzoxepin derivative and is the first of a family of tricyclic psychotherapeutic agents. Specifically, it is an isomeric mixture of 1-Propanamine, 3- dibenz[ b,e]oxepin-11 (6 H)ylidene- N,N-dimethyl-hydrochloride. Each 10 mg, 25 mg, 50 mg, 75 mg and 100 mg doxepin hydrochloride capsule for oral administration contains doxepin hydrochloride, USP equivalent to 10 mg, 25 mg, 50 mg, 75 mg and 100 mg of doxepin, respectively and the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch (maize), and sodium lauryl sulfate. The empty gelatin capsule shells contain D&C Yellow No. 10, gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the 25 mg and 50 mg empty gelatin capsule shells contain FD&C Yellow 6, the 75 mg and 100 mg empty gelatin capsule shells contain FD&C Green 3 and the 10 mg empty gelatin capsule shells contain FD&C Red 3. The imprinting ink contains black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, purified water, shellac and strong ammonia solution. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "83209-464-30",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (83209-464-30) ",
"NDC11Code": "83209-0464-30",
"ProductNDC": "83209-464",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ibuprofen",
"NonProprietaryName": "Ibuprofen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240603",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078558",
"LabelerName": "Boswell Pharmacy Services LLC d/b/a BPS Wholesale",
"SubstanceName": "IBUPROFEN",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240603",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of Ibuprofen Tablets and other treatment options before deciding to use Ibuprofen Tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals [see WARNINGS]. Ibuprofen Tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen Tablets are indicated for relief of mild to moderate pain. Ibuprofen Tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of Ibuprofen Tablets in children have not been conducted.",
"Description": "Ibuprofen Tablets, USP contain the active ingredient ibuprofen, which is (±)-2-( p-isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74° to 77°C and is very slightly soluble in water (<1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula is represented below. Ibuprofen Tablets, USP, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, pregelatinized starch, talc, stearic acid, and titanium dioxide."
},
{
"NDCCode": "83209-468-30",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (83209-468-30) ",
"NDC11Code": "83209-0468-30",
"ProductNDC": "83209-468",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lovastatin",
"NonProprietaryName": "Lovastatin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250224",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078296",
"LabelerName": "Boswell Pharmacy Services LLC d/b/a BPS Wholesale",
"SubstanceName": "LOVASTATIN",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-10-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250224",
"SamplePackage": "N",
"IndicationAndUsage": "Therapy with lovastatin tablets USP should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin tablets USP should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk. Primary Prevention of Coronary Heart Disease. In individuals without symptomatic cardiovascular disease, average to moderately elevated total-C and LDL-C and below average HDL-C, lovastatin tablets USP are indicated to reduce the risk of. -Myocardial infarction. -Unstable angina. -Coronary revascularization procedures. (See CLINICAL PHARMACOLOGY, Clinical Studies). Coronary Heart Disease. Lovastatin tablets USP are indicated to slow the progression of coronary atherosclerosis in patients with coronary heart disease as part of a treatment strategy to lower total-C and LDL-C to target levels. Hypercholesterolemia. Therapy with lipid-altering agents should be a component of multiple risk factor intervention in those individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Lovastatin tablets USP are indicated as an adjunct to diet for the reduction of elevated total-C and LDL-C levels in patients with primary hypercholesterolemia (Types IIa and IIb 2), when the response to diet restricted in saturated fat and cholesterol and to other nonpharmacological measures alone has been inadequate. Adolescent Patients with Heterozygous Familial Hypercholesterolemia. Lovastatin tablets USP are indicated as an adjunct to diet to reduce total-C, LDL-C and apolipoprotein B levels in adolescent boys and girls who are at least one year post-menarche, 10 to 17 years of age, with heFH if after an adequate trial of diet therapy the following findings are present. 1. LDL-C remains >189 mg/dL or. 2. LDL-C remains >160 mg/dL and: 1 there is a positive family history of premature cardiovascular disease or, 2 two or more other CVD risk factors are present in the adolescent patient.",
"Description": "Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus.After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S-[1α( R *),3α,7β,8β(2 S *,4 S *),8aβ]]-1,2,3,7, 8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H-pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24H 36O 5and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets USP are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, lactose anhydrous, lactose monohydrate, magnesium stearate, microcrystalline cellulose and pregelatinized corn starch. Butylated hydroxyanisole (BHA) is added as a preservative."
},
{
"NDCCode": "83209-554-30",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (83209-554-30) ",
"NDC11Code": "83209-0554-30",
"ProductNDC": "83209-554",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buspirone Hydrochloride",
"NonProprietaryName": "Buspirone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240515",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075022",
"LabelerName": "Boswell Pharmacy Services d/b/a BPS Wholesale",
"SubstanceName": "BUSPIRONE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240515",
"SamplePackage": "N",
"IndicationAndUsage": "Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone hydrochloride tablets has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone hydrochloride tablets relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, III 1as follows:. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge,” irritability, impatience.",
"Description": "Buspirone hydrochloride tablets, USP are an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound. Chemically, buspirone hydrochloride is N-[4-[4-(2-pyrimidinyl)-1-piperazinyl]butyl]-1,1-cyclopentanediacetamide monohydrochloride, which can be represented by the following structural formula:. C 21H 31N 5O 2HCl M.W. 421.96. Each tablet, for oral administration, contains 5 mg, 10 mg, 15 mg or 30 mg of buspirone hydrochloride, USP (equivalent to 4.6 mg, 9.1 mg, 13.7 mg, and 27.4 mg of buspirone free base, respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablets are scored such that they may be bisected or trisected. Thus, a single tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two-thirds of a tablet), 7.5 mg (one-half of a tablet), or 5 mg (one-third of a tablet). The 30 mg tablets are scored such that they may be bisected or trisected. Thus, a single tablet can provide the following doses: 30 mg (entire tablet), 20 mg (two-thirds of a tablet), 15 mg (one-half of a tablet), or 10 mg (one-third of a tablet). Buspirone hydrochloride tablets, USP contain the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate."
},
{
"NDCCode": "83209-566-30",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (83209-566-30) ",
"NDC11Code": "83209-0566-30",
"ProductNDC": "83209-566",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dapsone",
"NonProprietaryName": "Dapsone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240830",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207165",
"LabelerName": "Boswell Pharmacy Services LLC d/b/a BPS Wholesale",
"SubstanceName": "DAPSONE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sulfone [EPC], Sulfones [CS]",
"Status": "Active",
"LastUpdate": "2025-10-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240830",
"SamplePackage": "N",
"IndicationAndUsage": "Dermatitis herpetiformis: (D.H.). Leprosy: All forms of leprosy except for cases of proven Dapsone resistance.",
"Description": "Dapsone-USP, 4,4’-sulfonyl dianiline, is a primary treatment for Dermatitis herpetiformis. It is an antibacterial drug for susceptible cases of leprosy. It is a white to creamy white crystalline powder, very slightly soluble in water, sparingly soluble in alcohol, soluble in acetone and dilute mineral acids. Dapsone is issued on prescription in tablets of 25 mg and 100 mg for oral use. Inactive Ingredients: Magnesium stearate, microcrystalline cellulose, pregelatinized starch, sodium lauryl sulfate, sodium starch glycolate (Type A), and stearic acid."
},
{
"NDCCode": "83209-638-30",
"PackageDescription": "30 CAPSULE in 1 BLISTER PACK (83209-638-30) ",
"NDC11Code": "83209-0638-30",
"ProductNDC": "83209-638",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxepin Hydrochloride",
"NonProprietaryName": "Doxepin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240904",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215076",
"LabelerName": "Boswell Pharmacy Services LLC d/b/a BPS Wholesale",
"SubstanceName": "DOXEPIN HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tricyclic Antidepressant [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240904",
"SamplePackage": "N",
"IndicationAndUsage": "Doxepin hydrochloride capsules are recommended for the treatment of. The target symptoms of psychoneurosis that respond particularly well to doxepin hydrochloride capsules include anxiety, tension, depression, somatic symptoms and concerns, sleep disturbances, guilt, lack of energy, fear, apprehension and worry. Clinical experience has shown that doxepin hydrochloride capsule is safe and well tolerated even in the elderly patient. Owing to lack of clinical experience in the pediatric population, doxepin hydrochloride capsule is not recommended for use in children under 12 years of age.",
"Description": "Doxepin hydrochloride, USP is one of a class of psychotherapeutic agents known as dibenzoxepin tricyclic compounds. The molecular formula of the compound is C 19H 21NOHCl having a molecular weight of 316. It is a white or almost white crystalline powder. It is freely soluble in water, in alcohol and in methylene chloride. Doxepin HCl is a dibenzoxepin derivative and is the first of a family of tricyclic psychotherapeutic agents. Specifically, it is an isomeric mixture of:. 1-Propanamine, 3-dibenz[ b,e]oxepin-11(6H)ylidene- N,N-dimethyl-, hydrochloride. Doxepin Hydrochloride. Inactive Ingredients: Microcrystalline cellulose, sodium lauryl sulfate, pregelatinized starch, colloidal silicon dioxide and magnesium stearate. The capsule shell contains titanium dioxide, iron oxide yellow, gelatin, sodium lauryl sulfate. Additionally, 75 mg and 100 mg capsule shell also contains FD&C Blue 1. The capsule shells are printed with edible black ink containing shellac, iron oxide black and potassium hydroxide. FDA approved dissolution method differs from the USP dissolution method."
},
{
"NDCCode": "83209-663-30",
"PackageDescription": "30 CAPSULE in 1 BLISTER PACK (83209-663-30) ",
"NDC11Code": "83209-0663-30",
"ProductNDC": "83209-663",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gabapentin",
"NonProprietaryName": "Gabapentin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240726",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078787",
"LabelerName": "Boswell Pharmacy Services LLC d/b/a BPS Wholesale",
"SubstanceName": "GABAPENTIN",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2025-10-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240726",
"SamplePackage": "N",
"IndicationAndUsage": "Gabapentin capsules are indicated for: 1 Management of postherpetic neuralgia in adults, 2 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy.",
"Description": "The active ingredient in gabapentin capsules, USP is gabapentin, which has the chemical name 1-(aminomethyl)cyclohexaneacetic acid. The molecular formula of gabapentin is C 9H 17NO 2and the molecular weight is 171.24. The structural formula of gabapentin is:. Gabapentin USP is a white to off-white crystalline solid with a pK a1of 3.7 and a pK a2of 10.7. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.25. Each capsule contains the following inactive ingredients: corn starch and talc. The empty hard gelatin capsule shell consists of gelatin, sodium lauryl sulfate, and titanium dioxide. In addition 400 mg also contains yellow iron oxide and red iron oxide. The capsules are printed with edible ink containing black iron oxide and shellac."
},
{
"NDCCode": "83209-721-30",
"PackageDescription": "30 CAPSULE in 1 BLISTER PACK (83209-721-30) ",
"NDC11Code": "83209-0721-30",
"ProductNDC": "83209-721",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluoxetine",
"NonProprietaryName": "Fluoxetine",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240520",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078619",
"LabelerName": "Boswell Pharmacy Services LLC d/b/a BPS Wholesale",
"SubstanceName": "FLUOXETINE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-10-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240520",
"SamplePackage": "N",
"IndicationAndUsage": "Fluoxetine capsules are indicated for the treatment of. Fluoxetine capsules and Olanzapine in Combination are indicated for the treatment of. Fluoxetine capsules monotherapy is not indicated for the treatment of depressive episodes associated with Bipolar I Disorder or the treatment of treatment resistant depression. When using fluoxetine capsules and olanzapine in combination, also refer to the Clinical Studies section of the package insert for Symbyax ®.",
"Description": "Fluoxetine capsules, USP are a selective serotonin reuptake inhibitor for oral administration. It is designated (±)-N-methyl-3-phenyl-3-[(α,α,α-trifluoro- p-tolyl)oxy]propylamine hydrochloride and has the molecular formula of C 17H 18F 3NOHCl. Its molecular weight is 345.79. The structural formula is:. Fluoxetine hydrochloride is a white to off-white crystalline solid with a solubility of 14 mg/mL in water. Each capsule contains fluoxetine hydrochloride equivalent to 10 mg (32.3 μmol), 20 mg (64.7 μmol), or 40 mg (129.3 μmol) of fluoxetine. The capsules also contain the following inactive ingredients: colloidal silicon dioxide, FD&C Blue #1, gelatin, pregelatinized starch (maize), sodium lauryl sulphate, titanium dioxide and yellow iron oxide. In addition 40 mg also contains FD&C Yellow #6. The capsules are printed with edible ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution."
},
{
"NDCCode": "10424-143-30",
"PackageDescription": "1 BOTTLE in 1 CARTON (10424-143-30) > 30 mL in 1 BOTTLE",
"NDC11Code": "10424-0143-30",
"ProductNDC": "10424-143",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Syderm",
"NonProprietaryName": "Mucor Circinelloides F. Lusitanicus",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20091024",
"EndMarketingDate": "20160831",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Syntrion GmbH",
"SubstanceName": "MUCOR CIRCINELLOIDES F. LUSITANICUS",
"StrengthNumber": "6",
"StrengthUnit": "[hp_X]/30mL",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "13734-143-30",
"PackageDescription": "1 TRAY in 1 CARTON (13734-143-30) > 10 g in 1 TRAY",
"NDC11Code": "13734-0143-30",
"ProductNDC": "13734-143",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nars All Day Luminous Foundation",
"ProprietaryNameSuffix": "Macao",
"NonProprietaryName": "Octinoxate And Titanium Dioxide",
"DosageFormName": "POWDER",
"RouteName": "TOPICAL",
"StartMarketingDate": "20141001",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "NARS COSMETICS",
"SubstanceName": "OCTINOXATE; TITANIUM DIOXIDE",
"StrengthNumber": "690; 830",
"StrengthUnit": "mg/10g; mg/10g",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20141001",
"SamplePackage": "N"
},
{
"NDCCode": "16590-143-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (16590-143-30)",
"NDC11Code": "16590-0143-30",
"ProductNDC": "16590-143",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lorazepam",
"NonProprietaryName": "Lorazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19911031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA072926",
"LabelerName": "STAT RX USA LLC",
"SubstanceName": "LORAZEPAM",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg or 2 mg of lorazepam. The inactive ingredients present are lactose, magnesium stearate, microcrystalline cellulose and polacrilin potassium."
},
{
"NDCCode": "16714-143-01",
"PackageDescription": "30 TABLET in 1 BOTTLE (16714-143-01) ",
"NDC11Code": "16714-0143-01",
"ProductNDC": "16714-143",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aripiprazole",
"NonProprietaryName": "Aripiprazole",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20201001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205064",
"LabelerName": "NorthStar RxLLC",
"SubstanceName": "ARIPIPRAZOLE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201001",
"SamplePackage": "N",
"IndicationAndUsage": "Aripiprazole oral tablets are indicated for the treatment of: 1 Schizophrenia [see Clinical Studies (14.1)] , 2 Treatment of Tourette’s Disorder .",
"Description": "Aripiprazole is a psychotropic drug that is available as aripiprazole tablets. Aripiprazole tablets, USP are chemically designated as 7-[4-[4-(2,3-Dichlorophenyl)-1-piperazinyl]butoxy]-3,4-dihydro-2(1H)-quinolinone. The molecular formula is C23H27Cl2N3O2, and molecular weight is 448.39. The chemical structure is as follows. Aripiprazole tablets, USP are available in 2 mg, 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg strengths. Inactive ingredients include corn starch, FD&C Blue #2/Indigo Carmine Al, ferric oxide red, ferric oxide yellow, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate and microcrystalline cellulose. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "21749-143-01",
"PackageDescription": "30 mL in 1 BOTTLE (21749-143-01) ",
"NDC11Code": "21749-0143-01",
"ProductNDC": "21749-143",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Purell Advanced Hand Sanitizer Tranquil Sunset",
"NonProprietaryName": "Alcohol",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20121101",
"EndMarketingDate": "20190731",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333E",
"LabelerName": "GOJO Industries, Inc.",
"SubstanceName": "ALCOHOL",
"StrengthNumber": ".7",
"StrengthUnit": "mL/mL",
"Status": "Deprecated",
"LastUpdate": "2019-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20121101",
"EndMarketingDatePackage": "20190731",
"SamplePackage": "N"
},
{
"NDCCode": "22607-143-30",
"PackageDescription": "10 VIAL in 1 CARTON (22607-143-30) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL",
"NDC11Code": "22607-0143-30",
"ProductNDC": "22607-143",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"NonProprietaryName": "Ampicillin And Sulbactam",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"StartMarketingDate": "20091222",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Mitim S.r.L.",
"SubstanceName": "AMPICILLIN SODIUM; SULBACTAM SODIUM",
"StrengthNumber": "2; 1",
"StrengthUnit": "g/1; g/1",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "22-DEC-09"
},
{
"NDCCode": "22700-143-30",
"PackageDescription": "30 mL in 1 BOTTLE, PUMP (22700-143-30) ",
"NDC11Code": "22700-0143-30",
"ProductNDC": "22700-143",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Covergirl Queen Collection All Day Flawless 3in1 Foundation",
"ProprietaryNameSuffix": "Broad Spectrum Spf 20 - Q810 Classic Bronze",
"NonProprietaryName": "Ensulizole",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20120901",
"EndMarketingDate": "20211231",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Noxell",
"SubstanceName": "ENSULIZOLE",
"StrengthNumber": ".03",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20120901",
"EndMarketingDatePackage": "20211231",
"SamplePackage": "N"
},
{
"NDCCode": "25021-143-30",
"PackageDescription": "10 VIAL in 1 CARTON (25021-143-30) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL",
"NDC11Code": "25021-0143-30",
"ProductNDC": "25021-143",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin And Sulbactam",
"NonProprietaryName": "Ampicillin And Sulbactam",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20100630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201406",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "AMPICILLIN SODIUM; SULBACTAM SODIUM",
"StrengthNumber": "2; 1",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-10-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20100630",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin and Sulbactam for Injection is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli,2 Klebsiella spp.2 (including K. pneumoniae2), Proteus mirabilis,2 Bacteroides fragilis,2 Enterobacter spp.,2 and Acinetobacter calcoaceticus.2. NOTE: For information on use in pediatric patients (see PRECAUTIONS–Pediatric Use and CLINICAL STUDIES sections). Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae2), Bacteroides spp. (including B. fragilis), and Enterobacter spp.2. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli,2 and Bacteroides spp.2 (including B. fragilis2). _________. 2Efficacy for this organism in this organ system was studied in fewer than 10 infections. While Ampicillin and Sulbactam for Injection is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with Ampicillin and Sulbactam for Injection due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to Ampicillin and Sulbactam for Injection should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to Ampicillin and Sulbactam for Injection. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of Ampicillin and Sulbactam for Injection and other antibacterial drugs, Ampicillin and Sulbactam for Injection should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Ampicillin and Sulbactam for Injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is:. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is:. Ampicillin and Sulbactam for Injection, USP is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8.0 and 10.0. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 1.5 g vial contains ampicillin 1 g and sulbactam 0.5 g (equivalent to 1.063 g ampicillin sodium and 0.547 g sulbactam sodium). Each 1.5 g vial contains approximately 115 mg of sodium. Each 3 g vial contains ampicillin 2 g and sulbactam 1 g (equivalent to 2.125 g ampicillin sodium and 1.094 g sulbactam sodium). Each 3 g vial contains approximately 230 mg of sodium."
},
{
"NDCCode": "30698-143-23",
"PackageDescription": "30 CAPSULE, GELATIN COATED in 1 BOTTLE (30698-143-23) ",
"NDC11Code": "30698-0143-23",
"ProductNDC": "30698-143",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rocaltrol",
"NonProprietaryName": "Calcitriol",
"DosageFormName": "CAPSULE, GELATIN COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090820",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018044",
"LabelerName": "Validus Pharmaceuticals LLC",
"SubstanceName": "CALCITRIOL",
"StrengthNumber": ".25",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Cholecalciferol [CS], Vitamin D3 Analog [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20090820",
"SamplePackage": "N",
"IndicationAndUsage": "Predialysis Patients. Rocaltrol is indicated in the management of secondary hyperparathyroidism and resultant metabolic bone disease in patients with moderate to severe chronic renal failure (Ccr 15 to 55 mL/min) not yet on dialysis. In children, the creatinine clearance value must be corrected for a surface area of 1.73 square meters. A serum iPTH level of ≥ 100 pg/mL is strongly suggestive of secondary hyperparathyroidism. Dialysis Patients. Rocaltrol is indicated in the management of hypocalcemia and the resultant metabolic bone disease in patients undergoing chronic renal dialysis. In these patients, Rocaltrol administration enhances calcium absorption, reduces serum alkaline phosphatase levels, and may reduce elevated parathyroid hormone levels and the histological manifestations of osteitis fibrosa cystica and defective mineralization. Hypoparathyroidism Patients. Rocaltrol is also indicated in the management of hypocalcemia and its clinical manifestations in patients with postsurgical hypoparathyroidism, idiopathic hypoparathyroidism, and pseudohypoparathyroidism.",
"Description": "Rocaltrol (calcitriol) is a synthetic vitamin D analog which is active in the regulation of the absorption of calcium from the gastrointestinal tract and its utilization in the body. Rocaltrol is available as capsules containing 0.25 mcg or 0.5 mcg calcitriol and as an oral solution containing 1 mcg/mL of calcitriol. All dosage forms contain butylated hydroxyanisole (BHA) and butylated hydroxytoluene (BHT) as antioxidants. The capsules contain a fractionated triglyceride of coconut oil, and the oral solution contains a fractionated triglyceride of palm seed oil. Gelatin capsule shells contain glycerin, and sorbitol, with the following dye systems: 0.25 mcg - FD&C Yellow No. 6 and titanium dioxide; 0.5 mcg - FD&C Red No. 3, FD&C Yellow No. 6 and titanium dioxide. The oral solution contains no additional adjuvants or coloring principles. Calcitriol is a white, crystalline compound which occurs naturally in humans. It has a calculated molecular weight of 416.65 and is soluble in organic solvents but relatively insoluble in water. Chemically, calcitriol is 9,10-seco(5Z,7E)-5,7,10(19)-cholestatriene-1α, 3β, 25-triol and has the following structural formula. The other names frequently used for calcitriol are 1α,25-dihydroxycholecalciferol, 1,25-dihydroxyvitamin D3, 1,25-DHCC, 1,25(OH)2D3 and 1,25-diOHC. CLINICAL PHARMACOLOGY. Man's natural supply of vitamin D depends mainly on exposure to the ultraviolet rays of the sun for conversion of 7-dehydrocholesterol in the skin to vitamin D3 (cholecalciferol). Vitamin D3 must be metabolically activated in the liver and the kidney before it is fully active as a regulator of calcium and phosphorus metabolism at target tissues. The initial transformation of vitamin D3 is catalyzed by a vitamin D3-25-hydroxylase enzyme (25-OHase) present in the liver, and the product of this reaction is 25-hydroxyvitamin D3 [25-(OH) D3]. Hydroxylation of 25-(OH) D3 occurs in the mitochondria of kidney tissue, activated by the renal 25-hydroxyvitamin D3-1 alpha-hydroxylase (alpha-OHase), to produce 1,25-(OH)2D3 (calcitriol), the active form of vitamin D3. Endogenous synthesis and catabolism of calcitriol, as well as physiological control mechanisms affecting these processes, play a critical role regulating the serum level of calcitriol. Physiological daily production is normally 0.5 to 1.0 mcg and is somewhat higher during periods of increased bone synthesis (e.g., growth or pregnancy)."
},
{
"NDCCode": "33261-143-30",
"PackageDescription": "30 TABLET, COATED in 1 BOTTLE, PLASTIC (33261-143-30)",
"NDC11Code": "33261-0143-30",
"ProductNDC": "33261-143",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline",
"NonProprietaryName": "Doxycycline Hyclate",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20030702",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065095",
"LabelerName": "Aidarex Pharmaceuticals LLC",
"SubstanceName": "DOXYCYCLINE HYCLATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC],Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline hyclate and other antibacterial drugs, doxycycline hyclate should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Doxycycline hyclate is a broad-spectrum antibiotic synthetically derived from oxytetracycline. The chemical designation is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacene-carboxamide monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. Doxycycline is a light-yellow crystalline powder. Doxycycline Hyclate is soluble in water. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. The structural formula is as follows. Each tablet for oral administration contains doxycycline hyclate equivalent to 100 mg of doxycycline (anhydrous). Inactive ingredients are: Colloidal Silicon Dioxide, Corn Starch, Croscarmellose Sodium, Docusate Sodium, Magnesium Stearate, and Microcrystalline Cellulose. Film Coating and Polishing contains: FD&C Blue No. 2, FD&C Yellow No. 6, and Titanium Dioxide."
},
{
"NDCCode": "35356-143-30",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (35356-143-30) ",
"NDC11Code": "35356-0143-30",
"ProductNDC": "35356-143",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zonisamide",
"NonProprietaryName": "Zonisamide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20120214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077634",
"LabelerName": "Quality Care Products LLC",
"SubstanceName": "ZONISAMIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Carbonic Anhydrase Inhibitors [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE], P-Glycoprotein Inhibitors [MoA], Sulfonamides [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20120214",
"SamplePackage": "N",
"IndicationAndUsage": "Zonisamide is indicated as adjunctive therapy in the treatment of partial seizures in adults with epilepsy.",
"Description": "Zonisamide is an antiseizure drug chemically classified as a sulfonamide and unrelated to other antiseizure agents. The active ingredient is zonisamide, 1,2-benzisoxazole-3-methanesulfonamide. The molecular formula is C8H8N2O3S with a molecular weight of 212.23. Zonisamide is a white powder, pKa = 10.2, and is moderately soluble in water (0.8 mg/mL) and 0.1 N HCl (0.5 mg/mL). The chemical structure is. Zonisamide is supplied for oral administration as capsules containing 25 mg, 50 mg or 100 mg zonisamide. Each capsule contains the labeled amount of zonisamide plus the following inactive ingredients: microcrystalline cellulose, hydrogenated vegetable oil, gelatin, and titanium dioxide. In addition, individual empty hard gelatin capsule shell contains:50 mg: Black iron oxide.100 mg: FD and C Blue #1 and FD and C Red #40. The imprinting ink contains black iron oxide, shellac glaze, propylene glycol and also contains either FD and C Blue No. 2, FD and C Red No. 40, FD and C Blue No. 1 and D and C Yellow No.10 or strong ammonia solution and potassium hydroxide."
},
{
"NDCCode": "42571-143-30",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (42571-143-30) ",
"NDC11Code": "42571-0143-30",
"ProductNDC": "42571-143",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Celecoxib",
"NonProprietaryName": "Celecoxib",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20180601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204776",
"LabelerName": "Micro Labs Limited",
"SubstanceName": "CELECOXIB",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2025-05-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180601",
"SamplePackage": "N",
"IndicationAndUsage": "Celecoxib is indicated.",
"Description": "Celecoxib capsule is a nonsteroidal anti-inflammatory drug, available as capsules containing 50 mg, 100 mg, 200 mg and 400 mg celecoxib for oral administration. The chemical name is 4-[5-(4-methylphenyl)- 3-(trifluoromethyl)-1H-pyrazol-1-yl] benzenesulfonamide and is a diaryl-substituted pyrazole. The molecular weight is 381.38. Its molecular formula is C 17H 14F 3N 3O 2S, and it has the following chemical structure:. Celecoxib USP is a white or almost white crystalline powder with a pKa of 11.1 (sulfonamide moiety). Celecoxib USP is hydrophobic (log P is 3.5) and is soluble in ethanol and in methylene chloride, practically insoluble in water. The inactive ingredients in celecoxib capsules include: croscarmellose sodium, lactose monohydrate, magnesium stearate, povidone and sodium lauryl sulfate. The empty hard gelatin capsule shell contains gelatin and titanium dioxide. The capsules are printed with ink containing black iron oxide, potassium hydroxide, propylene glycol and shellac."
},
{
"NDCCode": "42708-143-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (42708-143-30) ",
"NDC11Code": "42708-0143-30",
"ProductNDC": "42708-143",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atenolol",
"NonProprietaryName": "Atenolol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100610",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077443",
"LabelerName": "QPharma, Inc.",
"SubstanceName": "ATENOLOL",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210310",
"SamplePackage": "Y",
"IndicationAndUsage": "Hypertension. Atenolol tablets USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets USP may be administered with other antihypertensive agents. Angina Pectoris Due to Coronary Atherosclerosis. Atenolol is indicated for the long-term management of patients with angina pectoris. Acute Myocardial Infarction. Atenolol is indicated in the management of hemodynamically stable patients with definite or suspected acute myocardial infarction to reduce cardiovascular mortality. Treatment can be initiated as soon as the patient's clinical condition allows. (See DOSAGE AND ADMNISTRATION, CONTRAINDICATIONSand WARNINGS). In general, there is no basis for treating patients like those who were excluded from the ISIS-1 trial (blood pressure less than 100 mm Hg systolic, heart rate less than 50 bpm) or have other reasons to avoid beta-blockade. As noted above, some subgroups (e.g., elderly patients with systolic blood pressure below 120 mm Hg) seemed less likely to benefit.",
"Description": "Atenolol, a synthetic, beta 1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4 -[2’-hydroxy-3’-[(1- methylethyl) amino] propoxy]-. The molecular and structural formulas are:. Atenolol (free base) has a molecular weight of 266. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets, USP is available as 25 mg, 50 mg and 100 mg tablets for oral administration. Inactive Ingredients: Magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, hydroxypropyl methylcellulose, titanium dioxide and glycerine."
},
{
"NDCCode": "42806-143-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (42806-143-30) ",
"NDC11Code": "42806-0143-30",
"ProductNDC": "42806-143",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Demeclocycline Hydrochloride",
"NonProprietaryName": "Demeclocycline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150202",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065447",
"LabelerName": "Epic Pharma, LLC",
"SubstanceName": "DEMECLOCYCLINE HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Antimicrobial [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2023-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150202",
"SamplePackage": "N",
"IndicationAndUsage": "Demeclocycline hydrochloride tablets USP is indicated in the treatment of infections caused by susceptible strains of the designated microorganisms in the conditions below. Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by rickettsiae; Respiratory tract infections caused by Mycoplasma pneumoniae; Lymphogranuloma venereum due to Chlamydia trachomatis; Psittacosis (Ornithosis) due to Chlamydia psittaci; Trachoma due to Chlamydia trachomatis, although the infectious agent is not always eliminated, as judged by immunofluorescence; Inclusion conjunctivitis caused by Chlamydia trachomatis; Nongonococcal urethritis in adults caused by Ureaplasma urealyticum or Chlamydia trachomatis; Relapsing fever due to Borrelia recurrentis;Chancroid caused by Haemophilus ducreyi;. Plague due to Yersinia pestis;. Tularemia due to Francisella tularensis;. Cholera caused by Vibrio cholerae;. Campylobacter fetus infections caused by Campylobacter fetus;. Brucellosis due to Brucella species (in conjunction with streptomycin);. Bartonellosis due to Bartonella bacilliformis;. Granuloma inguinale caused by Calymmatobacterium granulomatis;. Demeclocycline hydrochloride tablets USP is indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Escherichia coli;. Enterobacter aerogenes;. Shigella species;. Acinetobacter species;. Respiratory tract infections caused by Haemophilus influenzae;. Respiratory tract and urinary tract infections caused by Klebsiella species. Demeclocycline hydrochloride tablets USP is indicated for treatment of infections caused by the following gram-positive microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Upper respiratory infections caused by Streptococcus pneumoniae;. Skin and skin structure infections caused by Staphylococcus aureus. (Note: Tetracyclines, including demeclocycline, are not the drugs of choice in the treatment of any type of staphylococcal infection.) When penicillin is contraindicated, tetracyclines, including demeclocycline hydrochloride, are alternative drugs in the treatment of the following infections. Uncomplicated urethritis in men due to Neisseria gonorrhoeae, and for the treatment of other uncomplicated gonococcal infections; Infections in women caused by Neisseria gonorrhoeae;. Syphilis caused by Treponema pallidum subspecies pallidum;. Yaws caused by Treponema pallidum subspecies pertenue;. Listeriosis due to Listeria monocytogenes;. Anthrax due to Bacillus anthracis;. Vincent’s infection caused by Fusobacterium fusiforme;. Actinomycosis caused by Actinomyces israelii;. Clostridial diseases caused by Clostridium species. In acute intestinal amebiasis, demeclocycline hydrochloride tablets USP may be a useful adjunct to amebicides. In severe acne, demeclocycline hydrochloride tablets USP may be a useful adjunctive therapy. To reduce the development of drug-resistant bacteria and maintain the effectiveness of demeclocycline hydrochloride tablets USP and other antibacterial drugs, demeclocycline hydrochloride tablets USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Demeclocycline hydrochloride, USP is an antibiotic isolated from a mutant strain of Streptomyces aureofaciens. Chemically it is 7-Chloro-4-(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12, 12a-pentahydroxy-1,11-dioxo-2-naphthacenecarboxamide monohydrochloride. The structural formula is. Each film-coated tablet, for oral administration contains 150 mg or 300 mg of demeclocycline hydrochloride, USP and has the following inactive ingredients: carnauba wax, colloidal silicon dioxide, crospovidone, hydroxypropyl cellulose, hypromelloses, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, pregelatinized starch, talc, titanium dioxide, triacetin, D&C Red No. 27 Aluminum Lake, D&C Red No. 30 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake and FD&C Yellow No. 6 Aluminum Lake."
},
{
"NDCCode": "43063-143-30",
"PackageDescription": "30 TABLET in 1 BOTTLE, PLASTIC (43063-143-30) ",
"NDC11Code": "43063-0143-30",
"ProductNDC": "43063-143",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pravastatin Sodium",
"NonProprietaryName": "Pravastatin Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091231",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076714",
"LabelerName": "PD-Rx Pharmaceuticals, Inc.",
"SubstanceName": "PRAVASTATIN SODIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2022-05-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20120402",
"SamplePackage": "N"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>83209-143-30</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (83209-143-30) </PackageDescription>
<NDC11Code>83209-0143-30</NDC11Code>
<ProductNDC>83209-143</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lovastatin</ProprietaryName>
<NonProprietaryName>Lovastatin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250225</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075991</ApplicationNumber>
<LabelerName>Boswell Pharmacy Services LLC d/b/a BPS Wholesale</LabelerName>
<SubstanceName>LOVASTATIN</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250225</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Therapy with lovastatin should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk.</IndicationAndUsage>
<Description>Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus.After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S -[1α( R*), 3α, 7β, 8β(2 S *,4 S *),8aβ]]-1,2,3, 7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H-pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24H 36O 5and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, poloxamer, pregelatinized starch, sodium starch glycolate, butylated hydroxyanisole and talc. Butylated hydroxyanisole (BHA) is added as a preservative.</Description>
</NDC>
<NDC>
<NDCCode>83209-150-30</NDCCode>
<PackageDescription>30 CAPSULE, DELAYED RELEASE in 1 BLISTER PACK (83209-150-30) </PackageDescription>
<NDC11Code>83209-0150-30</NDC11Code>
<ProductNDC>83209-150</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omeprazole</ProprietaryName>
<NonProprietaryName>Omeprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240612</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212977</ApplicationNumber>
<LabelerName>Boswell Pharmacy Services LLC d/b/a BPS Wholesale</LabelerName>
<SubstanceName>OMEPRAZOLE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240612</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Omeprazole delayed-release capsules are a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults ( 1.1) , 2 Eradication of Helicobacter pylorito reduce the risk of duodenal ulcer recurrence in adults ( 1.2) , 3 Treatment of active benign gastric ulcer in adults ( 1.3) , 4 Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 2 years of age and older ( 1.4) , 5 Treatment of erosive esophagitis (EE) due to acid-mediated GERD in patients 2 years of age and older ( 1.5) , 6 Maintenance of healing of EE due to acid-mediated GERD in patients 2 years of age and older ( 1.6) , 7 Pathologic hypersecretory conditions in adults ( 1.7) .</IndicationAndUsage>
<Description>The active ingredient in omeprazole delayed-release capsule, USP is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1 H-benzimidazole, a compound that inhibits gastric acid secretion. Its molecular formula is C 17H 19N 3O 3S, with a molecular weight of 345.42. The structural formula is:. Omeprazole is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg or 20 mg of omeprazole in the form of enteric-coated granules. The 10 mg and 20 mg capsule contains the following inactive ingredients: crospovidone, dibasic sodium phosphate, hypromellose, magnesium hydroxide granules (with corn starch), methacrylicacid and ethyl acrylate copolymer dispersion, polyethylene glycol, polysorbate 80, polyvinyl alcohol, polyvinyl alcohol-polyethylene glycol graft copolymer, purified water, silicon dioxide, sodium lauryl sulfate, sugar spheres (sucrose, corn starch, and purified water), talc, and titanium dioxide. The capsule shells for the 10 and 20 mg have the following inactive ingredients: gelatin and titanium dioxide. The ink used for printing contains: black iron oxide, potassium hydroxide, propylene glycol, shellac, and strong ammonia solution. Omeprazole delayed-release capsules meet USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>83209-190-30</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (83209-190-30) </PackageDescription>
<NDC11Code>83209-0190-30</NDC11Code>
<ProductNDC>83209-190</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Naproxen</ProprietaryName>
<NonProprietaryName>Naproxen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240823</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078250</ApplicationNumber>
<LabelerName>Boswell Pharmacy Services LLC d/b/a BPS Wholesale</LabelerName>
<SubstanceName>NAPROXEN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240823</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Naproxen tablets and naproxen sodium tablets are indicated for. the relief of the signs and symptoms of: 1 rheumatoid arthritis, 2 osteoarthritis, 3 ankylosing spondylitis, 4 Polyarticular Juvenile Idiopathic Arthritis.</IndicationAndUsage>
<Description>Naproxen Tablets, USP and Naproxen Sodium Tablets, USP are nonsteroidal anti-inflammatory drugs available as follows. Naproxen Tablets, USP are available as follows for oral administration. 250 mg: circular, light orange colored, flat, uncoated tablets, engraved with ‘G’ and ‘32’ on either side of a break line on one side and ‘250’ on the other side. 375 mg: oval, light orange colored, biconvex, uncoated tablets, engraved with ‘G32’ on one side and ‘375’ on the other side. 500 mg: capsule shaped, light orange colored, uncoated tablets, debossed with ‘G’ and ‘32’ on either side of a break line on one side and ‘500’ on the other side. The inactive ingredients are croscarmellose sodium, iron oxide red, iron oxide yellow, magnesium stearate, microcrystalline cellulose and povidone. The inactive ingredients are colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone and talc. The coating suspension for the naproxen sodium 275 mg and 550 mg tablet contains FD&C blue#2, iron oxide red, hypromellose, polyethylene glycol and titanium dioxide. Naproxen, USP is a propionic acid derivative related to the arylacetic acid group of nonsteroidal anti-inflammatory drugs. The chemical names for naproxen, USP and naproxen sodium, USP are (S)-6-methoxy-α-methyl-2-naphthaleneacetic acid and (S)-6-methoxy-α-methyl-2-naphthaleneacetic acid, sodium salt, respectively. Naproxen, USP has a molecular weight of 230.26 g/mol and a molecular formula of C 14H 14O 3. Naproxen sodium, USP has a molecular weight of 252.24 g/mol and a molecular formula of C 14H 13NaO 3. Naproxen, USP and naproxen sodium, USP have the following structures, respectively:. Naproxen, USP is a white to off-white crystalline powder. It is soluble in chloroform, dehydrated alcohol and alcohol; sparingly soluble in ether, insoluble in water. Naproxen sodium, USP is a white to almost white crystalline powder, soluble in water and methanol; sparingly soluble in ethanol.</Description>
</NDC>
<NDC>
<NDCCode>83209-192-30</NDCCode>
<PackageDescription>30 CAPSULE in 1 BLISTER PACK (83209-192-30) </PackageDescription>
<NDC11Code>83209-0192-30</NDC11Code>
<ProductNDC>83209-192</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluoxetine</ProprietaryName>
<NonProprietaryName>Fluoxetine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240816</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078619</ApplicationNumber>
<LabelerName>Boswell Pharmacy Services LLC d/b/a BPS Wholesale</LabelerName>
<SubstanceName>FLUOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-10-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240816</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluoxetine capsules are indicated for the treatment of. Fluoxetine capsules and Olanzapine in Combination are indicated for the treatment of. Fluoxetine capsules monotherapy is not indicated for the treatment of depressive episodes associated with Bipolar I Disorder or the treatment of treatment resistant depression. When using fluoxetine capsules and olanzapine in combination, also refer to the Clinical Studies section of the package insert for Symbyax ®.</IndicationAndUsage>
<Description>Fluoxetine capsules, USP are a selective serotonin reuptake inhibitor for oral administration. It is designated (±)-N-methyl-3-phenyl-3-[(α,α,α-trifluoro- p-tolyl)oxy]propylamine hydrochloride and has the molecular formula of C 17H 18F 3NOHCl. Its molecular weight is 345.79. The structural formula is:. Fluoxetine hydrochloride is a white to off-white crystalline solid with a solubility of 14 mg/mL in water. Each capsule contains fluoxetine hydrochloride equivalent to 10 mg (32.3 μmol), 20 mg (64.7 μmol), or 40 mg (129.3 μmol) of fluoxetine. The capsules also contain the following inactive ingredients: colloidal silicon dioxide, FD&C Blue #1, gelatin, pregelatinized starch (maize), sodium lauryl sulphate, titanium dioxide and yellow iron oxide. In addition 40 mg also contains FD&C Yellow #6. The capsules are printed with edible ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>83209-220-30</NDCCode>
<PackageDescription>30 CAPSULE in 1 BLISTER PACK (83209-220-30) </PackageDescription>
<NDC11Code>83209-0220-30</NDC11Code>
<ProductNDC>83209-220</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lithium Carbonate</ProprietaryName>
<NonProprietaryName>Lithium Carbonate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240821</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079139</ApplicationNumber>
<LabelerName>Boswell Pharmacy Services LLC d/b/a BPS Wholesale</LabelerName>
<SubstanceName>LITHIUM CARBONATE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Mood Stabilizer [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240821</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lithium is a mood-stabilizing agent indicated as monotherapy for the treatment of bipolar I disorder: 1 Treatment of acute manic and mixed episodes in patients 7 years and older [see Clinical Studies ( 14)] , 2 Maintenance treatment in patients 7 years and older [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Each capsule for oral administration contains lithium carbonate, USP 150 mg, 300 mg or 600 mg and the following inactive ingredients: colloidal silicon dioxide, gelatin, sodium lauryl sulfate, talc, titanium dioxide, FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and the imprinting ink contains shellac, propylene glycol, potassium hydroxide, and black iron oxide. Lithium is an element of the alkali-metal group with atomic number 3, atomic weight 6.94, and an emission line at 671 nm on the flame photometer. Lithium Carbonate, USP is a white, crystalline powder with molecular formula Li 2CO 3and molecular weight 73.89.</Description>
</NDC>
<NDC>
<NDCCode>83209-303-30</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (83209-303-30) </PackageDescription>
<NDC11Code>83209-0303-30</NDC11Code>
<ProductNDC>83209-303</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buspirone Hydrochloride</ProprietaryName>
<NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20251113</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075022</ApplicationNumber>
<LabelerName>Boswell Pharmacy Services LLC d/b/a BPS Wholesale</LabelerName>
<SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-11-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251113</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone hydrochloride tablets has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone hydrochloride tablets relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, III 1as follows:. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge,” irritability, impatience.</IndicationAndUsage>
<Description>Buspirone hydrochloride tablets, USP are an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound. Chemically, buspirone hydrochloride is N-[4-[4-(2-pyrimidinyl)-1-piperazinyl]butyl]-1,1-cyclopentanediacetamide monohydrochloride, which can be represented by the following structural formula:. C 21H 31N 5O 2HCl M.W. 421.96. Each tablet, for oral administration, contains 5 mg, 10 mg, 15 mg or 30 mg of buspirone hydrochloride, USP (equivalent to 4.6 mg, 9.1 mg, 13.7 mg, and 27.4 mg of buspirone free base, respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablets are scored such that they may be bisected or trisected. Thus, a single tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two-thirds of a tablet), 7.5 mg (one-half of a tablet), or 5 mg (one-third of a tablet). The 30 mg tablets are scored such that they may be bisected or trisected. Thus, a single tablet can provide the following doses: 30 mg (entire tablet), 20 mg (two-thirds of a tablet), 15 mg (one-half of a tablet), or 10 mg (one-third of a tablet). Buspirone hydrochloride tablets, USP contain the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>83209-399-30</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (83209-399-30) </PackageDescription>
<NDC11Code>83209-0399-30</NDC11Code>
<ProductNDC>83209-399</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine Besylate</ProprietaryName>
<NonProprietaryName>Amlodipine Besylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20251021</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203245</ApplicationNumber>
<LabelerName>Boswell Pharmacy Services LLC d/b/a BPS Wholesale</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251021</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amlodipine besylate tablets are calcium channel blockers and may be used alone or in combination with other antihypertensive and antianginal agents for the treatment of: 1 Hypertension ( 1.1) Amlodipine besylate tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions., 2 Coronary Artery Disease ( 1.2) Chronic Stable AnginaVasospastic Angina (Prinzmetal's or Variant Angina)Angiographically Documented Coronary Artery Disease in patients without heart failure or an ejection fraction < 40%.</IndicationAndUsage>
<Description>Amlodipine besylate, USP is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate, USP is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl] 4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C 20H 25ClN 2O 5C 6H 6O 3S and its structural formula is:. Amlodipine besylate, USP is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlohowdipinebesylate Tablets, USP are formulated as yellow tablets equivalent to 2.5 mg or white tablets equivalent to 5 and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, USP, each tablet contains the following inactive ingredients: colloidal silicon dioxide,magnesium stearate,microcrystalline cellulose and sodium starch glycolate. The 2.5 mg strength additionally contains ferric oxide yellow as coloring agent.</Description>
</NDC>
<NDC>
<NDCCode>83209-424-30</NDCCode>
<PackageDescription>30 CAPSULE in 1 BLISTER PACK (83209-424-30) </PackageDescription>
<NDC11Code>83209-0424-30</NDC11Code>
<ProductNDC>83209-424</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxepin Hydrochloride</ProprietaryName>
<NonProprietaryName>Doxepin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240904</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215710</ApplicationNumber>
<LabelerName>Boswell Pharmacy Services LLC d/b/a BPS Wholesale</LabelerName>
<SubstanceName>DOXEPIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240904</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Doxepin Hydrochloride Capsules, USP are recommended for the treatment of: 1 Psychoneurotic patients with depression and/or anxiety., 2 Depression and/or anxiety associated with alcoholism (not to be taken concomitantly with alcohol)., 3 Depression and/or anxiety associated with organic disease (the possibility of drug interaction should be considered if the patient is receiving other drugs concomitantly)., 4 Psychotic depressive disorders with associated anxiety including involutional depression and manic-depressive disorders.</IndicationAndUsage>
<Description>Doxepin hydrochloride is one of a class of psychotherapeutic agents known as dibenzoxepin tricyclic compounds. The molecular formula of the compound is C 19H 21NO HCl having a molecular weight of 315.84. It is a white to almost white crystalline powder freely soluble in water, in alcohol and methylene chloride. It may be represented by the following structural formula:. Chemically, doxepin hydrochloride is a dibenzoxepin derivative and is the first of a family of tricyclic psychotherapeutic agents. Specifically, it is an isomeric mixture of 1-Propanamine, 3- dibenz[ b,e]oxepin-11 (6 H)ylidene- N,N-dimethyl-hydrochloride. Each 10 mg, 25 mg, 50 mg, 75 mg and 100 mg doxepin hydrochloride capsule for oral administration contains doxepin hydrochloride, USP equivalent to 10 mg, 25 mg, 50 mg, 75 mg and 100 mg of doxepin, respectively and the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch (maize), and sodium lauryl sulfate. The empty gelatin capsule shells contain D&C Yellow No. 10, gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the 25 mg and 50 mg empty gelatin capsule shells contain FD&C Yellow 6, the 75 mg and 100 mg empty gelatin capsule shells contain FD&C Green 3 and the 10 mg empty gelatin capsule shells contain FD&C Red 3. The imprinting ink contains black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, purified water, shellac and strong ammonia solution. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>83209-464-30</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (83209-464-30) </PackageDescription>
<NDC11Code>83209-0464-30</NDC11Code>
<ProductNDC>83209-464</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ibuprofen</ProprietaryName>
<NonProprietaryName>Ibuprofen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240603</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078558</ApplicationNumber>
<LabelerName>Boswell Pharmacy Services LLC d/b/a BPS Wholesale</LabelerName>
<SubstanceName>IBUPROFEN</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240603</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of Ibuprofen Tablets and other treatment options before deciding to use Ibuprofen Tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals [see WARNINGS]. Ibuprofen Tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen Tablets are indicated for relief of mild to moderate pain. Ibuprofen Tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of Ibuprofen Tablets in children have not been conducted.</IndicationAndUsage>
<Description>Ibuprofen Tablets, USP contain the active ingredient ibuprofen, which is (±)-2-( p-isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74° to 77°C and is very slightly soluble in water (<1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula is represented below. Ibuprofen Tablets, USP, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, pregelatinized starch, talc, stearic acid, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>83209-468-30</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (83209-468-30) </PackageDescription>
<NDC11Code>83209-0468-30</NDC11Code>
<ProductNDC>83209-468</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lovastatin</ProprietaryName>
<NonProprietaryName>Lovastatin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250224</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078296</ApplicationNumber>
<LabelerName>Boswell Pharmacy Services LLC d/b/a BPS Wholesale</LabelerName>
<SubstanceName>LOVASTATIN</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Therapy with lovastatin tablets USP should be a component of multiple risk factor intervention in those individuals with dyslipidemia at risk for atherosclerotic vascular disease. Lovastatin tablets USP should be used in addition to a diet restricted in saturated fat and cholesterol as part of a treatment strategy to lower total-C and LDL-C to target levels when the response to diet and other nonpharmacological measures alone has been inadequate to reduce risk. Primary Prevention of Coronary Heart Disease. In individuals without symptomatic cardiovascular disease, average to moderately elevated total-C and LDL-C and below average HDL-C, lovastatin tablets USP are indicated to reduce the risk of. -Myocardial infarction. -Unstable angina. -Coronary revascularization procedures. (See CLINICAL PHARMACOLOGY, Clinical Studies). Coronary Heart Disease. Lovastatin tablets USP are indicated to slow the progression of coronary atherosclerosis in patients with coronary heart disease as part of a treatment strategy to lower total-C and LDL-C to target levels. Hypercholesterolemia. Therapy with lipid-altering agents should be a component of multiple risk factor intervention in those individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Lovastatin tablets USP are indicated as an adjunct to diet for the reduction of elevated total-C and LDL-C levels in patients with primary hypercholesterolemia (Types IIa and IIb 2), when the response to diet restricted in saturated fat and cholesterol and to other nonpharmacological measures alone has been inadequate. Adolescent Patients with Heterozygous Familial Hypercholesterolemia. Lovastatin tablets USP are indicated as an adjunct to diet to reduce total-C, LDL-C and apolipoprotein B levels in adolescent boys and girls who are at least one year post-menarche, 10 to 17 years of age, with heFH if after an adequate trial of diet therapy the following findings are present. 1. LDL-C remains >189 mg/dL or. 2. LDL-C remains >160 mg/dL and: 1 there is a positive family history of premature cardiovascular disease or, 2 two or more other CVD risk factors are present in the adolescent patient.</IndicationAndUsage>
<Description>Lovastatin is a cholesterol lowering agent isolated from a strain of Aspergillus terreus.After oral ingestion, lovastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is a principal metabolite and an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate limiting step in the biosynthesis of cholesterol. Lovastatin is [1 S-[1α( R *),3α,7β,8β(2 S *,4 S *),8aβ]]-1,2,3,7, 8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2 H-pyran-2-yl)ethyl]-1-naphthalenyl 2-methylbutanoate. The empirical formula of lovastatin is C 24H 36O 5and its molecular weight is 404.55. Its structural formula is:. Lovastatin is a white, nonhygroscopic crystalline powder that is insoluble in water and sparingly soluble in ethanol, methanol, and acetonitrile. Lovastatin tablets USP are supplied as 10 mg, 20 mg and 40 mg tablets for oral administration. In addition to the active ingredient lovastatin, each tablet contains the following inactive ingredients: D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, lactose anhydrous, lactose monohydrate, magnesium stearate, microcrystalline cellulose and pregelatinized corn starch. Butylated hydroxyanisole (BHA) is added as a preservative.</Description>
</NDC>
<NDC>
<NDCCode>83209-554-30</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (83209-554-30) </PackageDescription>
<NDC11Code>83209-0554-30</NDC11Code>
<ProductNDC>83209-554</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buspirone Hydrochloride</ProprietaryName>
<NonProprietaryName>Buspirone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240515</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075022</ApplicationNumber>
<LabelerName>Boswell Pharmacy Services d/b/a BPS Wholesale</LabelerName>
<SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240515</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone hydrochloride tablets has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone hydrochloride tablets relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, III 1as follows:. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge,” irritability, impatience.</IndicationAndUsage>
<Description>Buspirone hydrochloride tablets, USP are an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound. Chemically, buspirone hydrochloride is N-[4-[4-(2-pyrimidinyl)-1-piperazinyl]butyl]-1,1-cyclopentanediacetamide monohydrochloride, which can be represented by the following structural formula:. C 21H 31N 5O 2HCl M.W. 421.96. Each tablet, for oral administration, contains 5 mg, 10 mg, 15 mg or 30 mg of buspirone hydrochloride, USP (equivalent to 4.6 mg, 9.1 mg, 13.7 mg, and 27.4 mg of buspirone free base, respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablets are scored such that they may be bisected or trisected. Thus, a single tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two-thirds of a tablet), 7.5 mg (one-half of a tablet), or 5 mg (one-third of a tablet). The 30 mg tablets are scored such that they may be bisected or trisected. Thus, a single tablet can provide the following doses: 30 mg (entire tablet), 20 mg (two-thirds of a tablet), 15 mg (one-half of a tablet), or 10 mg (one-third of a tablet). Buspirone hydrochloride tablets, USP contain the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>83209-566-30</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (83209-566-30) </PackageDescription>
<NDC11Code>83209-0566-30</NDC11Code>
<ProductNDC>83209-566</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dapsone</ProprietaryName>
<NonProprietaryName>Dapsone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240830</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207165</ApplicationNumber>
<LabelerName>Boswell Pharmacy Services LLC d/b/a BPS Wholesale</LabelerName>
<SubstanceName>DAPSONE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sulfone [EPC], Sulfones [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240830</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dermatitis herpetiformis: (D.H.). Leprosy: All forms of leprosy except for cases of proven Dapsone resistance.</IndicationAndUsage>
<Description>Dapsone-USP, 4,4’-sulfonyl dianiline, is a primary treatment for Dermatitis herpetiformis. It is an antibacterial drug for susceptible cases of leprosy. It is a white to creamy white crystalline powder, very slightly soluble in water, sparingly soluble in alcohol, soluble in acetone and dilute mineral acids. Dapsone is issued on prescription in tablets of 25 mg and 100 mg for oral use. Inactive Ingredients: Magnesium stearate, microcrystalline cellulose, pregelatinized starch, sodium lauryl sulfate, sodium starch glycolate (Type A), and stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>83209-638-30</NDCCode>
<PackageDescription>30 CAPSULE in 1 BLISTER PACK (83209-638-30) </PackageDescription>
<NDC11Code>83209-0638-30</NDC11Code>
<ProductNDC>83209-638</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxepin Hydrochloride</ProprietaryName>
<NonProprietaryName>Doxepin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240904</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215076</ApplicationNumber>
<LabelerName>Boswell Pharmacy Services LLC d/b/a BPS Wholesale</LabelerName>
<SubstanceName>DOXEPIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240904</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Doxepin hydrochloride capsules are recommended for the treatment of. The target symptoms of psychoneurosis that respond particularly well to doxepin hydrochloride capsules include anxiety, tension, depression, somatic symptoms and concerns, sleep disturbances, guilt, lack of energy, fear, apprehension and worry. Clinical experience has shown that doxepin hydrochloride capsule is safe and well tolerated even in the elderly patient. Owing to lack of clinical experience in the pediatric population, doxepin hydrochloride capsule is not recommended for use in children under 12 years of age.</IndicationAndUsage>
<Description>Doxepin hydrochloride, USP is one of a class of psychotherapeutic agents known as dibenzoxepin tricyclic compounds. The molecular formula of the compound is C 19H 21NOHCl having a molecular weight of 316. It is a white or almost white crystalline powder. It is freely soluble in water, in alcohol and in methylene chloride. Doxepin HCl is a dibenzoxepin derivative and is the first of a family of tricyclic psychotherapeutic agents. Specifically, it is an isomeric mixture of:. 1-Propanamine, 3-dibenz[ b,e]oxepin-11(6H)ylidene- N,N-dimethyl-, hydrochloride. Doxepin Hydrochloride. Inactive Ingredients: Microcrystalline cellulose, sodium lauryl sulfate, pregelatinized starch, colloidal silicon dioxide and magnesium stearate. The capsule shell contains titanium dioxide, iron oxide yellow, gelatin, sodium lauryl sulfate. Additionally, 75 mg and 100 mg capsule shell also contains FD&C Blue 1. The capsule shells are printed with edible black ink containing shellac, iron oxide black and potassium hydroxide. FDA approved dissolution method differs from the USP dissolution method.</Description>
</NDC>
<NDC>
<NDCCode>83209-663-30</NDCCode>
<PackageDescription>30 CAPSULE in 1 BLISTER PACK (83209-663-30) </PackageDescription>
<NDC11Code>83209-0663-30</NDC11Code>
<ProductNDC>83209-663</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gabapentin</ProprietaryName>
<NonProprietaryName>Gabapentin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240726</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078787</ApplicationNumber>
<LabelerName>Boswell Pharmacy Services LLC d/b/a BPS Wholesale</LabelerName>
<SubstanceName>GABAPENTIN</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240726</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gabapentin capsules are indicated for: 1 Management of postherpetic neuralgia in adults, 2 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy.</IndicationAndUsage>
<Description>The active ingredient in gabapentin capsules, USP is gabapentin, which has the chemical name 1-(aminomethyl)cyclohexaneacetic acid. The molecular formula of gabapentin is C 9H 17NO 2and the molecular weight is 171.24. The structural formula of gabapentin is:. Gabapentin USP is a white to off-white crystalline solid with a pK a1of 3.7 and a pK a2of 10.7. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.25. Each capsule contains the following inactive ingredients: corn starch and talc. The empty hard gelatin capsule shell consists of gelatin, sodium lauryl sulfate, and titanium dioxide. In addition 400 mg also contains yellow iron oxide and red iron oxide. The capsules are printed with edible ink containing black iron oxide and shellac.</Description>
</NDC>
<NDC>
<NDCCode>83209-721-30</NDCCode>
<PackageDescription>30 CAPSULE in 1 BLISTER PACK (83209-721-30) </PackageDescription>
<NDC11Code>83209-0721-30</NDC11Code>
<ProductNDC>83209-721</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluoxetine</ProprietaryName>
<NonProprietaryName>Fluoxetine</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240520</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078619</ApplicationNumber>
<LabelerName>Boswell Pharmacy Services LLC d/b/a BPS Wholesale</LabelerName>
<SubstanceName>FLUOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-10-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluoxetine capsules are indicated for the treatment of. Fluoxetine capsules and Olanzapine in Combination are indicated for the treatment of. Fluoxetine capsules monotherapy is not indicated for the treatment of depressive episodes associated with Bipolar I Disorder or the treatment of treatment resistant depression. When using fluoxetine capsules and olanzapine in combination, also refer to the Clinical Studies section of the package insert for Symbyax ®.</IndicationAndUsage>
<Description>Fluoxetine capsules, USP are a selective serotonin reuptake inhibitor for oral administration. It is designated (±)-N-methyl-3-phenyl-3-[(α,α,α-trifluoro- p-tolyl)oxy]propylamine hydrochloride and has the molecular formula of C 17H 18F 3NOHCl. Its molecular weight is 345.79. The structural formula is:. Fluoxetine hydrochloride is a white to off-white crystalline solid with a solubility of 14 mg/mL in water. Each capsule contains fluoxetine hydrochloride equivalent to 10 mg (32.3 μmol), 20 mg (64.7 μmol), or 40 mg (129.3 μmol) of fluoxetine. The capsules also contain the following inactive ingredients: colloidal silicon dioxide, FD&C Blue #1, gelatin, pregelatinized starch (maize), sodium lauryl sulphate, titanium dioxide and yellow iron oxide. In addition 40 mg also contains FD&C Yellow #6. The capsules are printed with edible ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>10424-143-30</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (10424-143-30) > 30 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>10424-0143-30</NDC11Code>
<ProductNDC>10424-143</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Syderm</ProprietaryName>
<NonProprietaryName>Mucor Circinelloides F. Lusitanicus</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20091024</StartMarketingDate>
<EndMarketingDate>20160831</EndMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Syntrion GmbH</LabelerName>
<SubstanceName>MUCOR CIRCINELLOIDES F. LUSITANICUS</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>[hp_X]/30mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>13734-143-30</NDCCode>
<PackageDescription>1 TRAY in 1 CARTON (13734-143-30) > 10 g in 1 TRAY</PackageDescription>
<NDC11Code>13734-0143-30</NDC11Code>
<ProductNDC>13734-143</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nars All Day Luminous Foundation</ProprietaryName>
<ProprietaryNameSuffix>Macao</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate And Titanium Dioxide</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20141001</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>NARS COSMETICS</LabelerName>
<SubstanceName>OCTINOXATE; TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>690; 830</StrengthNumber>
<StrengthUnit>mg/10g; mg/10g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>16590-143-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (16590-143-30)</PackageDescription>
<NDC11Code>16590-0143-30</NDC11Code>
<ProductNDC>16590-143</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lorazepam</ProprietaryName>
<NonProprietaryName>Lorazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19911031</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA072926</ApplicationNumber>
<LabelerName>STAT RX USA LLC</LabelerName>
<SubstanceName>LORAZEPAM</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg or 2 mg of lorazepam. The inactive ingredients present are lactose, magnesium stearate, microcrystalline cellulose and polacrilin potassium.</Description>
</NDC>
<NDC>
<NDCCode>16714-143-01</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (16714-143-01) </PackageDescription>
<NDC11Code>16714-0143-01</NDC11Code>
<ProductNDC>16714-143</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aripiprazole</ProprietaryName>
<NonProprietaryName>Aripiprazole</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205064</ApplicationNumber>
<LabelerName>NorthStar RxLLC</LabelerName>
<SubstanceName>ARIPIPRAZOLE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Aripiprazole oral tablets are indicated for the treatment of: 1 Schizophrenia [see Clinical Studies (14.1)] , 2 Treatment of Tourette’s Disorder .</IndicationAndUsage>
<Description>Aripiprazole is a psychotropic drug that is available as aripiprazole tablets. Aripiprazole tablets, USP are chemically designated as 7-[4-[4-(2,3-Dichlorophenyl)-1-piperazinyl]butoxy]-3,4-dihydro-2(1H)-quinolinone. The molecular formula is C23H27Cl2N3O2, and molecular weight is 448.39. The chemical structure is as follows. Aripiprazole tablets, USP are available in 2 mg, 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg strengths. Inactive ingredients include corn starch, FD&C Blue #2/Indigo Carmine Al, ferric oxide red, ferric oxide yellow, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate and microcrystalline cellulose. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>21749-143-01</NDCCode>
<PackageDescription>30 mL in 1 BOTTLE (21749-143-01) </PackageDescription>
<NDC11Code>21749-0143-01</NDC11Code>
<ProductNDC>21749-143</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Purell Advanced Hand Sanitizer Tranquil Sunset</ProprietaryName>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20121101</StartMarketingDate>
<EndMarketingDate>20190731</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333E</ApplicationNumber>
<LabelerName>GOJO Industries, Inc.</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>.7</StrengthNumber>
<StrengthUnit>mL/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20121101</StartMarketingDatePackage>
<EndMarketingDatePackage>20190731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>22607-143-30</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (22607-143-30) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>22607-0143-30</NDC11Code>
<ProductNDC>22607-143</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<NonProprietaryName>Ampicillin And Sulbactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<StartMarketingDate>20091222</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Mitim S.r.L.</LabelerName>
<SubstanceName>AMPICILLIN SODIUM; SULBACTAM SODIUM</SubstanceName>
<StrengthNumber>2; 1</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>22-DEC-09</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>22700-143-30</NDCCode>
<PackageDescription>30 mL in 1 BOTTLE, PUMP (22700-143-30) </PackageDescription>
<NDC11Code>22700-0143-30</NDC11Code>
<ProductNDC>22700-143</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Covergirl Queen Collection All Day Flawless 3in1 Foundation</ProprietaryName>
<ProprietaryNameSuffix>Broad Spectrum Spf 20 - Q810 Classic Bronze</ProprietaryNameSuffix>
<NonProprietaryName>Ensulizole</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20120901</StartMarketingDate>
<EndMarketingDate>20211231</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Noxell</LabelerName>
<SubstanceName>ENSULIZOLE</SubstanceName>
<StrengthNumber>.03</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20120901</StartMarketingDatePackage>
<EndMarketingDatePackage>20211231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>25021-143-30</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (25021-143-30) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>25021-0143-30</NDC11Code>
<ProductNDC>25021-143</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin And Sulbactam</ProprietaryName>
<NonProprietaryName>Ampicillin And Sulbactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20100630</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201406</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>AMPICILLIN SODIUM; SULBACTAM SODIUM</SubstanceName>
<StrengthNumber>2; 1</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100630</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin and Sulbactam for Injection is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli,2 Klebsiella spp.2 (including K. pneumoniae2), Proteus mirabilis,2 Bacteroides fragilis,2 Enterobacter spp.,2 and Acinetobacter calcoaceticus.2. NOTE: For information on use in pediatric patients (see PRECAUTIONS–Pediatric Use and CLINICAL STUDIES sections). Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae2), Bacteroides spp. (including B. fragilis), and Enterobacter spp.2. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli,2 and Bacteroides spp.2 (including B. fragilis2). _________. 2Efficacy for this organism in this organ system was studied in fewer than 10 infections. While Ampicillin and Sulbactam for Injection is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with Ampicillin and Sulbactam for Injection due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to Ampicillin and Sulbactam for Injection should not require the addition of another antibacterial. Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to Ampicillin and Sulbactam for Injection. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate. To reduce the development of drug-resistant bacteria and maintain effectiveness of Ampicillin and Sulbactam for Injection and other antibacterial drugs, Ampicillin and Sulbactam for Injection should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Ampicillin and Sulbactam for Injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is:. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylate 4,4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is:. Ampicillin and Sulbactam for Injection, USP is available as a white to off-white dry powder for reconstitution. Ampicillin and Sulbactam for Injection, USP dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8.0 and 10.0. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same. Each 1.5 g vial contains ampicillin 1 g and sulbactam 0.5 g (equivalent to 1.063 g ampicillin sodium and 0.547 g sulbactam sodium). Each 1.5 g vial contains approximately 115 mg of sodium. Each 3 g vial contains ampicillin 2 g and sulbactam 1 g (equivalent to 2.125 g ampicillin sodium and 1.094 g sulbactam sodium). Each 3 g vial contains approximately 230 mg of sodium.</Description>
</NDC>
<NDC>
<NDCCode>30698-143-23</NDCCode>
<PackageDescription>30 CAPSULE, GELATIN COATED in 1 BOTTLE (30698-143-23) </PackageDescription>
<NDC11Code>30698-0143-23</NDC11Code>
<ProductNDC>30698-143</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rocaltrol</ProprietaryName>
<NonProprietaryName>Calcitriol</NonProprietaryName>
<DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090820</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018044</ApplicationNumber>
<LabelerName>Validus Pharmaceuticals LLC</LabelerName>
<SubstanceName>CALCITRIOL</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Cholecalciferol [CS], Vitamin D3 Analog [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090820</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Predialysis Patients. Rocaltrol is indicated in the management of secondary hyperparathyroidism and resultant metabolic bone disease in patients with moderate to severe chronic renal failure (Ccr 15 to 55 mL/min) not yet on dialysis. In children, the creatinine clearance value must be corrected for a surface area of 1.73 square meters. A serum iPTH level of ≥ 100 pg/mL is strongly suggestive of secondary hyperparathyroidism. Dialysis Patients. Rocaltrol is indicated in the management of hypocalcemia and the resultant metabolic bone disease in patients undergoing chronic renal dialysis. In these patients, Rocaltrol administration enhances calcium absorption, reduces serum alkaline phosphatase levels, and may reduce elevated parathyroid hormone levels and the histological manifestations of osteitis fibrosa cystica and defective mineralization. Hypoparathyroidism Patients. Rocaltrol is also indicated in the management of hypocalcemia and its clinical manifestations in patients with postsurgical hypoparathyroidism, idiopathic hypoparathyroidism, and pseudohypoparathyroidism.</IndicationAndUsage>
<Description>Rocaltrol (calcitriol) is a synthetic vitamin D analog which is active in the regulation of the absorption of calcium from the gastrointestinal tract and its utilization in the body. Rocaltrol is available as capsules containing 0.25 mcg or 0.5 mcg calcitriol and as an oral solution containing 1 mcg/mL of calcitriol. All dosage forms contain butylated hydroxyanisole (BHA) and butylated hydroxytoluene (BHT) as antioxidants. The capsules contain a fractionated triglyceride of coconut oil, and the oral solution contains a fractionated triglyceride of palm seed oil. Gelatin capsule shells contain glycerin, and sorbitol, with the following dye systems: 0.25 mcg - FD&C Yellow No. 6 and titanium dioxide; 0.5 mcg - FD&C Red No. 3, FD&C Yellow No. 6 and titanium dioxide. The oral solution contains no additional adjuvants or coloring principles. Calcitriol is a white, crystalline compound which occurs naturally in humans. It has a calculated molecular weight of 416.65 and is soluble in organic solvents but relatively insoluble in water. Chemically, calcitriol is 9,10-seco(5Z,7E)-5,7,10(19)-cholestatriene-1α, 3β, 25-triol and has the following structural formula. The other names frequently used for calcitriol are 1α,25-dihydroxycholecalciferol, 1,25-dihydroxyvitamin D3, 1,25-DHCC, 1,25(OH)2D3 and 1,25-diOHC. CLINICAL PHARMACOLOGY. Man's natural supply of vitamin D depends mainly on exposure to the ultraviolet rays of the sun for conversion of 7-dehydrocholesterol in the skin to vitamin D3 (cholecalciferol). Vitamin D3 must be metabolically activated in the liver and the kidney before it is fully active as a regulator of calcium and phosphorus metabolism at target tissues. The initial transformation of vitamin D3 is catalyzed by a vitamin D3-25-hydroxylase enzyme (25-OHase) present in the liver, and the product of this reaction is 25-hydroxyvitamin D3 [25-(OH) D3]. Hydroxylation of 25-(OH) D3 occurs in the mitochondria of kidney tissue, activated by the renal 25-hydroxyvitamin D3-1 alpha-hydroxylase (alpha-OHase), to produce 1,25-(OH)2D3 (calcitriol), the active form of vitamin D3. Endogenous synthesis and catabolism of calcitriol, as well as physiological control mechanisms affecting these processes, play a critical role regulating the serum level of calcitriol. Physiological daily production is normally 0.5 to 1.0 mcg and is somewhat higher during periods of increased bone synthesis (e.g., growth or pregnancy).</Description>
</NDC>
<NDC>
<NDCCode>33261-143-30</NDCCode>
<PackageDescription>30 TABLET, COATED in 1 BOTTLE, PLASTIC (33261-143-30)</PackageDescription>
<NDC11Code>33261-0143-30</NDC11Code>
<ProductNDC>33261-143</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline</ProprietaryName>
<NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20030702</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065095</ApplicationNumber>
<LabelerName>Aidarex Pharmaceuticals LLC</LabelerName>
<SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC],Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline hyclate and other antibacterial drugs, doxycycline hyclate should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Doxycycline hyclate is a broad-spectrum antibiotic synthetically derived from oxytetracycline. The chemical designation is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacene-carboxamide monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. Doxycycline is a light-yellow crystalline powder. Doxycycline Hyclate is soluble in water. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. The structural formula is as follows. Each tablet for oral administration contains doxycycline hyclate equivalent to 100 mg of doxycycline (anhydrous). Inactive ingredients are: Colloidal Silicon Dioxide, Corn Starch, Croscarmellose Sodium, Docusate Sodium, Magnesium Stearate, and Microcrystalline Cellulose. Film Coating and Polishing contains: FD&C Blue No. 2, FD&C Yellow No. 6, and Titanium Dioxide.</Description>
</NDC>
<NDC>
<NDCCode>35356-143-30</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (35356-143-30) </PackageDescription>
<NDC11Code>35356-0143-30</NDC11Code>
<ProductNDC>35356-143</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zonisamide</ProprietaryName>
<NonProprietaryName>Zonisamide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077634</ApplicationNumber>
<LabelerName>Quality Care Products LLC</LabelerName>
<SubstanceName>ZONISAMIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Carbonic Anhydrase Inhibitors [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE], P-Glycoprotein Inhibitors [MoA], Sulfonamides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120214</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Zonisamide is indicated as adjunctive therapy in the treatment of partial seizures in adults with epilepsy.</IndicationAndUsage>
<Description>Zonisamide is an antiseizure drug chemically classified as a sulfonamide and unrelated to other antiseizure agents. The active ingredient is zonisamide, 1,2-benzisoxazole-3-methanesulfonamide. The molecular formula is C8H8N2O3S with a molecular weight of 212.23. Zonisamide is a white powder, pKa = 10.2, and is moderately soluble in water (0.8 mg/mL) and 0.1 N HCl (0.5 mg/mL). The chemical structure is. Zonisamide is supplied for oral administration as capsules containing 25 mg, 50 mg or 100 mg zonisamide. Each capsule contains the labeled amount of zonisamide plus the following inactive ingredients: microcrystalline cellulose, hydrogenated vegetable oil, gelatin, and titanium dioxide. In addition, individual empty hard gelatin capsule shell contains:50 mg: Black iron oxide.100 mg: FD and C Blue #1 and FD and C Red #40. The imprinting ink contains black iron oxide, shellac glaze, propylene glycol and also contains either FD and C Blue No. 2, FD and C Red No. 40, FD and C Blue No. 1 and D and C Yellow No.10 or strong ammonia solution and potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>42571-143-30</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (42571-143-30) </PackageDescription>
<NDC11Code>42571-0143-30</NDC11Code>
<ProductNDC>42571-143</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Celecoxib</ProprietaryName>
<NonProprietaryName>Celecoxib</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204776</ApplicationNumber>
<LabelerName>Micro Labs Limited</LabelerName>
<SubstanceName>CELECOXIB</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Celecoxib is indicated.</IndicationAndUsage>
<Description>Celecoxib capsule is a nonsteroidal anti-inflammatory drug, available as capsules containing 50 mg, 100 mg, 200 mg and 400 mg celecoxib for oral administration. The chemical name is 4-[5-(4-methylphenyl)- 3-(trifluoromethyl)-1H-pyrazol-1-yl] benzenesulfonamide and is a diaryl-substituted pyrazole. The molecular weight is 381.38. Its molecular formula is C 17H 14F 3N 3O 2S, and it has the following chemical structure:. Celecoxib USP is a white or almost white crystalline powder with a pKa of 11.1 (sulfonamide moiety). Celecoxib USP is hydrophobic (log P is 3.5) and is soluble in ethanol and in methylene chloride, practically insoluble in water. The inactive ingredients in celecoxib capsules include: croscarmellose sodium, lactose monohydrate, magnesium stearate, povidone and sodium lauryl sulfate. The empty hard gelatin capsule shell contains gelatin and titanium dioxide. The capsules are printed with ink containing black iron oxide, potassium hydroxide, propylene glycol and shellac.</Description>
</NDC>
<NDC>
<NDCCode>42708-143-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (42708-143-30) </PackageDescription>
<NDC11Code>42708-0143-30</NDC11Code>
<ProductNDC>42708-143</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atenolol</ProprietaryName>
<NonProprietaryName>Atenolol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100610</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077443</ApplicationNumber>
<LabelerName>QPharma, Inc.</LabelerName>
<SubstanceName>ATENOLOL</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210310</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>Hypertension. Atenolol tablets USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets USP may be administered with other antihypertensive agents. Angina Pectoris Due to Coronary Atherosclerosis. Atenolol is indicated for the long-term management of patients with angina pectoris. Acute Myocardial Infarction. Atenolol is indicated in the management of hemodynamically stable patients with definite or suspected acute myocardial infarction to reduce cardiovascular mortality. Treatment can be initiated as soon as the patient's clinical condition allows. (See DOSAGE AND ADMNISTRATION, CONTRAINDICATIONSand WARNINGS). In general, there is no basis for treating patients like those who were excluded from the ISIS-1 trial (blood pressure less than 100 mm Hg systolic, heart rate less than 50 bpm) or have other reasons to avoid beta-blockade. As noted above, some subgroups (e.g., elderly patients with systolic blood pressure below 120 mm Hg) seemed less likely to benefit.</IndicationAndUsage>
<Description>Atenolol, a synthetic, beta 1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4 -[2’-hydroxy-3’-[(1- methylethyl) amino] propoxy]-. The molecular and structural formulas are:. Atenolol (free base) has a molecular weight of 266. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets, USP is available as 25 mg, 50 mg and 100 mg tablets for oral administration. Inactive Ingredients: Magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, hydroxypropyl methylcellulose, titanium dioxide and glycerine.</Description>
</NDC>
<NDC>
<NDCCode>42806-143-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (42806-143-30) </PackageDescription>
<NDC11Code>42806-0143-30</NDC11Code>
<ProductNDC>42806-143</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Demeclocycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Demeclocycline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150202</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065447</ApplicationNumber>
<LabelerName>Epic Pharma, LLC</LabelerName>
<SubstanceName>DEMECLOCYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Antimicrobial [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Demeclocycline hydrochloride tablets USP is indicated in the treatment of infections caused by susceptible strains of the designated microorganisms in the conditions below. Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by rickettsiae; Respiratory tract infections caused by Mycoplasma pneumoniae; Lymphogranuloma venereum due to Chlamydia trachomatis; Psittacosis (Ornithosis) due to Chlamydia psittaci; Trachoma due to Chlamydia trachomatis, although the infectious agent is not always eliminated, as judged by immunofluorescence; Inclusion conjunctivitis caused by Chlamydia trachomatis; Nongonococcal urethritis in adults caused by Ureaplasma urealyticum or Chlamydia trachomatis; Relapsing fever due to Borrelia recurrentis;Chancroid caused by Haemophilus ducreyi;. Plague due to Yersinia pestis;. Tularemia due to Francisella tularensis;. Cholera caused by Vibrio cholerae;. Campylobacter fetus infections caused by Campylobacter fetus;. Brucellosis due to Brucella species (in conjunction with streptomycin);. Bartonellosis due to Bartonella bacilliformis;. Granuloma inguinale caused by Calymmatobacterium granulomatis;. Demeclocycline hydrochloride tablets USP is indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Escherichia coli;. Enterobacter aerogenes;. Shigella species;. Acinetobacter species;. Respiratory tract infections caused by Haemophilus influenzae;. Respiratory tract and urinary tract infections caused by Klebsiella species. Demeclocycline hydrochloride tablets USP is indicated for treatment of infections caused by the following gram-positive microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Upper respiratory infections caused by Streptococcus pneumoniae;. Skin and skin structure infections caused by Staphylococcus aureus. (Note: Tetracyclines, including demeclocycline, are not the drugs of choice in the treatment of any type of staphylococcal infection.) When penicillin is contraindicated, tetracyclines, including demeclocycline hydrochloride, are alternative drugs in the treatment of the following infections. Uncomplicated urethritis in men due to Neisseria gonorrhoeae, and for the treatment of other uncomplicated gonococcal infections; Infections in women caused by Neisseria gonorrhoeae;. Syphilis caused by Treponema pallidum subspecies pallidum;. Yaws caused by Treponema pallidum subspecies pertenue;. Listeriosis due to Listeria monocytogenes;. Anthrax due to Bacillus anthracis;. Vincent’s infection caused by Fusobacterium fusiforme;. Actinomycosis caused by Actinomyces israelii;. Clostridial diseases caused by Clostridium species. In acute intestinal amebiasis, demeclocycline hydrochloride tablets USP may be a useful adjunct to amebicides. In severe acne, demeclocycline hydrochloride tablets USP may be a useful adjunctive therapy. To reduce the development of drug-resistant bacteria and maintain the effectiveness of demeclocycline hydrochloride tablets USP and other antibacterial drugs, demeclocycline hydrochloride tablets USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Demeclocycline hydrochloride, USP is an antibiotic isolated from a mutant strain of Streptomyces aureofaciens. Chemically it is 7-Chloro-4-(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12, 12a-pentahydroxy-1,11-dioxo-2-naphthacenecarboxamide monohydrochloride. The structural formula is. Each film-coated tablet, for oral administration contains 150 mg or 300 mg of demeclocycline hydrochloride, USP and has the following inactive ingredients: carnauba wax, colloidal silicon dioxide, crospovidone, hydroxypropyl cellulose, hypromelloses, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, pregelatinized starch, talc, titanium dioxide, triacetin, D&C Red No. 27 Aluminum Lake, D&C Red No. 30 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake and FD&C Yellow No. 6 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>43063-143-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (43063-143-30) </PackageDescription>
<NDC11Code>43063-0143-30</NDC11Code>
<ProductNDC>43063-143</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pravastatin Sodium</ProprietaryName>
<NonProprietaryName>Pravastatin Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091231</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076714</ApplicationNumber>
<LabelerName>PD-Rx Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>PRAVASTATIN SODIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-05-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
</NDCList>